All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeremy Linton <jeremy.linton@arm.com>
To: netdev@vger.kernel.org
Cc: opendmb@gmail.com, f.fainelli@gmail.com, davem@davemloft.net,
	bcm-kernel-feedback-list@broadcom.com,
	linux-kernel@vger.kernel.org, wahrenst@gmx.net, andrew@lunn.ch,
	hkallweit1@gmail.com, Jeremy Linton <jeremy.linton@arm.com>
Subject: [PATCH 4/6] net: bcmgenet: Initial bcmgenet ACPI support
Date: Sat,  1 Feb 2020 01:46:23 -0600	[thread overview]
Message-ID: <20200201074625.8698-5-jeremy.linton@arm.com> (raw)
In-Reply-To: <20200201074625.8698-1-jeremy.linton@arm.com>

The rpi4 is capable of booting in ACPI mode with the latest
edk2-platform commits. As such it would be helpful if the genet
platform device were usable.

To achieve this we add a new MODULE_DEVICE_TABLE, and convert
a few dt specific methods to their generic device_ calls. Until
the next patch, ACPI based machines will fallback on random
mac addresses.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 .../net/ethernet/broadcom/genet/bcmgenet.c    | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 120fa05a39ff..c736700f829e 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -7,6 +7,7 @@
 
 #define pr_fmt(fmt)				"bcmgenet: " fmt
 
+#include <linux/acpi.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -3476,7 +3477,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
 	const struct bcmgenet_plat_data *pdata;
 	struct bcmgenet_priv *priv;
 	struct net_device *dev;
-	const void *macaddr;
+	const void *macaddr = NULL;
 	unsigned int i;
 	int err = -EIO;
 	const char *phy_mode_str;
@@ -3510,7 +3511,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
 
 	if (dn)
 		macaddr = of_get_mac_address(dn);
-	else
+	else if (pd)
 		macaddr = pd->mac_address;
 
 	priv->base = devm_platform_ioremap_resource(pdev, 0);
@@ -3555,8 +3556,9 @@ static int bcmgenet_probe(struct platform_device *pdev)
 
 	priv->dev = dev;
 	priv->pdev = pdev;
-	if (of_id) {
-		pdata = of_id->data;
+
+	pdata = device_get_match_data(&pdev->dev);
+	if (pdata) {
 		priv->version = pdata->version;
 		priv->dma_max_burst_length = pdata->dma_max_burst_length;
 	} else {
@@ -3595,7 +3597,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
 	/* If this is an internal GPHY, power it on now, before UniMAC is
 	 * brought out of reset as absolutely no UniMAC activity is allowed
 	 */
-	if (dn && !of_property_read_string(dn, "phy-mode", &phy_mode_str) &&
+	if (!device_property_read_string(&pdev->dev, "phy-mode", &phy_mode_str) &&
 	    !strcasecmp(phy_mode_str, "internal"))
 		bcmgenet_power_up(priv, GENET_POWER_PASSIVE);
 
@@ -3768,6 +3770,12 @@ static int bcmgenet_suspend(struct device *d)
 
 static SIMPLE_DEV_PM_OPS(bcmgenet_pm_ops, bcmgenet_suspend, bcmgenet_resume);
 
+static const struct acpi_device_id genet_acpi_match[] = {
+	{ "BCM6E4E", (kernel_ulong_t)&bcm2711_plat_data },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, genet_acpi_match);
+
 static struct platform_driver bcmgenet_driver = {
 	.probe	= bcmgenet_probe,
 	.remove	= bcmgenet_remove,
@@ -3776,6 +3784,7 @@ static struct platform_driver bcmgenet_driver = {
 		.name	= "bcmgenet",
 		.of_match_table = bcmgenet_match,
 		.pm	= &bcmgenet_pm_ops,
+		.acpi_match_table = ACPI_PTR(genet_acpi_match),
 	},
 };
 module_platform_driver(bcmgenet_driver);
-- 
2.24.1


  parent reply	other threads:[~2020-02-01  7:46 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-01  7:46 [PATCH 0/6] Add ACPI bindings to the genet Jeremy Linton
2020-02-01  7:46 ` [PATCH 1/6] mdio_bus: Add generic mdio_find_bus() Jeremy Linton
2020-02-01  7:46 ` [PATCH 2/6] net: bcmgenet: refactor phy mode configuration Jeremy Linton
2020-02-01 16:24   ` Florian Fainelli
2020-02-01 19:10     ` Jeremy Linton
2020-02-03  1:17     ` Andrew Lunn
2020-02-03  3:24       ` Florian Fainelli
2020-02-03 18:46         ` Jeremy Linton
2020-02-03 18:55           ` Florian Fainelli
2020-02-05 21:05   ` kbuild test robot
2020-02-05 21:05     ` kbuild test robot
2020-02-01  7:46 ` [PATCH 3/6] net: bcmgenet: enable automatic phy discovery Jeremy Linton
2020-02-01 15:25   ` Andrew Lunn
2020-02-01 19:07     ` Jeremy Linton
2020-02-03 20:55       ` Florian Fainelli
2020-02-03 21:21         ` Andrew Lunn
2020-02-01 20:02     ` Jeremy Linton
2020-02-03  1:15       ` Andrew Lunn
2020-02-03 21:10         ` Jeremy Linton
2020-02-01  7:46 ` Jeremy Linton [this message]
2020-02-01 15:33   ` [PATCH 4/6] net: bcmgenet: Initial bcmgenet ACPI support Andrew Lunn
2020-02-01 19:09     ` Jeremy Linton
2020-02-01  7:46 ` [PATCH 5/6] net: bcmgenet: Fetch MAC address from the adapter Jeremy Linton
2020-02-01 15:37   ` Andrew Lunn
2020-02-01 19:20     ` Jeremy Linton
2020-02-01  7:46 ` [PATCH 6/6] net: bcmgenet: reduce severity of missing clock warnings Jeremy Linton
2020-02-01 16:18   ` Florian Fainelli
2020-02-01 16:44   ` Stefan Wahren
2020-02-01 19:27     ` Jeremy Linton
2020-02-03 18:36       ` Nicolas Saenz Julienne
2020-02-03 19:08         ` Stefan Wahren
2020-02-03 21:21           ` Florian Fainelli
2020-02-05 18:42             ` Stefan Wahren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200201074625.8698-5-jeremy.linton@arm.com \
    --to=jeremy.linton@arm.com \
    --cc=andrew@lunn.ch \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=opendmb@gmail.com \
    --cc=wahrenst@gmx.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.