All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 0/4] rockchip: rk3399: Fix HDMI out
@ 2020-01-23 16:28 ` Jagan Teki
  0 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-01-23 16:28 UTC (permalink / raw)
  To: Kever Yang, Simon Glass, Philipp Tomsich
  Cc: u-boot, linux-amarula, linux-rockchip

Due to recent Linux dts(i) sync for rk3399. the existing
vop driver is not working with HDMI out on RK3399.

These patches fixing the same and enabled HDMI out new boards.

Any inputs?
Jagan.

Jagan Teki (4):
  arm64: dts: rk3399-u-boot: Delete vop assigned-clocks/rates
  video: rockchip: Fix vop modes for rk3399
  rockchip: Enable pre console for rk3399
  rockchip: Enable HDMI output on rk3399 board w/ HDMI

 arch/arm/dts/rk3399-u-boot.dtsi                 |  4 ++++
 arch/arm/include/asm/arch-rockchip/vop_rk3288.h | 11 +++++++++++
 arch/arm/mach-rockchip/Kconfig                  |  1 +
 common/Kconfig                                  |  1 +
 configs/nanopc-t4-rk3399_defconfig              |  6 ++++++
 configs/nanopi-m4-rk3399_defconfig              |  6 ++++++
 configs/nanopi-neo4-rk3399_defconfig            |  6 ++++++
 configs/roc-pc-rk3399_defconfig                 |  6 ++++++
 drivers/video/rockchip/rk3399_vop.c             |  2 --
 drivers/video/rockchip/rk_vop.c                 |  4 ++++
 include/configs/evb_rk3399.h                    |  5 +++++
 11 files changed, 50 insertions(+), 2 deletions(-)

-- 
2.18.0.321.gffc6fa0e3

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH 0/4] rockchip: rk3399: Fix HDMI out
@ 2020-01-23 16:28 ` Jagan Teki
  0 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-01-23 16:28 UTC (permalink / raw)
  To: u-boot

Due to recent Linux dts(i) sync for rk3399. the existing
vop driver is not working with HDMI out on RK3399.

These patches fixing the same and enabled HDMI out new boards.

Any inputs?
Jagan.

Jagan Teki (4):
  arm64: dts: rk3399-u-boot: Delete vop assigned-clocks/rates
  video: rockchip: Fix vop modes for rk3399
  rockchip: Enable pre console for rk3399
  rockchip: Enable HDMI output on rk3399 board w/ HDMI

 arch/arm/dts/rk3399-u-boot.dtsi                 |  4 ++++
 arch/arm/include/asm/arch-rockchip/vop_rk3288.h | 11 +++++++++++
 arch/arm/mach-rockchip/Kconfig                  |  1 +
 common/Kconfig                                  |  1 +
 configs/nanopc-t4-rk3399_defconfig              |  6 ++++++
 configs/nanopi-m4-rk3399_defconfig              |  6 ++++++
 configs/nanopi-neo4-rk3399_defconfig            |  6 ++++++
 configs/roc-pc-rk3399_defconfig                 |  6 ++++++
 drivers/video/rockchip/rk3399_vop.c             |  2 --
 drivers/video/rockchip/rk_vop.c                 |  4 ++++
 include/configs/evb_rk3399.h                    |  5 +++++
 11 files changed, 50 insertions(+), 2 deletions(-)

-- 
2.18.0.321.gffc6fa0e3

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH 1/4] arm64: dts: rk3399-u-boot: Delete vop assigned-clocks/rates
  2020-01-23 16:28 ` Jagan Teki
@ 2020-01-23 16:28     ` Jagan Teki
  -1 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-01-23 16:28 UTC (permalink / raw)
  To: Kever Yang, Simon Glass, Philipp Tomsich
  Cc: u-boot-0aAXYlwwYIKGBzrmiIFOJg, Michael Trimarchi,
	linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
	Jagan Teki, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

Linux supporting assigned-clocks for VOP on rk3399 by assuming
U-Boot not initializing it on this linux commit:

commit <617f4472bdd3> ("arm64: dts: rockchip: init rk3399 vop clock rates")

There is no specific need to initialize these assigned clock
in U-Boot as video drivers still work with default aclk and  
hclk values. So, these clocks are simply not supported by rk3399
clock driver.

But, during stdio probe of vidconsole, the device probe
will try to check whether the assigned clocks on that video
console node is initialized or not? and return error if not.

So, delete these property via -u-boot dtsi as there is
no specific need in U-Boot.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/dts/rk3399-u-boot.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
index 40240bbfc2..b8b20ed22d 100644
--- a/arch/arm/dts/rk3399-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-u-boot.dtsi
@@ -64,9 +64,13 @@
 };
 
 &vopb {
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
 	u-boot,dm-pre-reloc;
 };
 
 &vopl {
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
 	u-boot,dm-pre-reloc;
 };
-- 
2.18.0.321.gffc6fa0e3


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 1/4] arm64: dts: rk3399-u-boot: Delete vop assigned-clocks/rates
@ 2020-01-23 16:28     ` Jagan Teki
  0 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-01-23 16:28 UTC (permalink / raw)
  To: u-boot

Linux supporting assigned-clocks for VOP on rk3399 by assuming
U-Boot not initializing it on this linux commit:

commit <617f4472bdd3> ("arm64: dts: rockchip: init rk3399 vop clock rates")

There is no specific need to initialize these assigned clock
in U-Boot as video drivers still work with default aclk and  
hclk values. So, these clocks are simply not supported by rk3399
clock driver.

But, during stdio probe of vidconsole, the device probe
will try to check whether the assigned clocks on that video
console node is initialized or not? and return error if not.

So, delete these property via -u-boot dtsi as there is
no specific need in U-Boot.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/dts/rk3399-u-boot.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/dts/rk3399-u-boot.dtsi b/arch/arm/dts/rk3399-u-boot.dtsi
index 40240bbfc2..b8b20ed22d 100644
--- a/arch/arm/dts/rk3399-u-boot.dtsi
+++ b/arch/arm/dts/rk3399-u-boot.dtsi
@@ -64,9 +64,13 @@
 };
 
 &vopb {
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
 	u-boot,dm-pre-reloc;
 };
 
 &vopl {
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
 	u-boot,dm-pre-reloc;
 };
-- 
2.18.0.321.gffc6fa0e3

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 2/4] video: rockchip: Fix vop modes for rk3399
  2020-01-23 16:28 ` Jagan Teki
@ 2020-01-23 16:28     ` Jagan Teki
  -1 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-01-23 16:28 UTC (permalink / raw)
  To: Kever Yang, Simon Glass, Philipp Tomsich
  Cc: u-boot-0aAXYlwwYIKGBzrmiIFOJg, Michael Trimarchi,
	linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
	Jagan Teki, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

VOP display endpoint pipeline configuration is differs
between rk3288 vs rk3399.

These VOP pipeline configuration depends on how the
different display interfaces connected in sequence to
IN and OUT ports like for,

RK3288:

vopb_out: port {
	#address-cells = <1>;
	#size-cells = <0>;
	vopb_out_edp: endpoint@0 {
		reg = <0>;
		remote-endpoint = <&edp_in_vopb>;
	};
	vopb_out_hdmi: endpoint@1 {
		reg = <1>;
                remote-endpoint = <&hdmi_in_vopb>;
        };
        vopb_out_lvds: endpoint@2 {
                reg = <2>;
                remote-endpoint = <&lvds_in_vopb>;
        };
        vopb_out_mipi: endpoint@3 {
                reg = <3>;
                remote-endpoint = <&mipi_in_vopb>;
        };
};

RK3399:

vopb_out: port {
         #address-cells = <1>;
         #size-cells = <0>;
         vopb_out_edp: endpoint@0 {
                reg = <0>;
                remote-endpoint = <&edp_in_vopb>;
         };
         vopb_out_mipi: endpoint@1 {
                reg = <1>;
                remote-endpoint = <&mipi_in_vopb>;
         };
         vopb_out_hdmi: endpoint@2 {
                reg = <2>;
                remote-endpoint = <&hdmi_in_vopb>;
         };
         vopb_out_mipi1: endpoint@3 {
                reg = <3>;
                remote-endpoint = <&mipi1_in_vopb>;
         };
         vopb_out_dp: endpoint@4 {
                reg = <4>;
                remote-endpoint = <&dp_in_vopb>;
         };
};

here, HDMI interface has endpoint 1 in rk3288 and 2 in rk3399.

The rockchip vop driver often depends on this determined endpoint
number and stored in vop_mode. So based on this vop_mode the bpp
and pin polarity would configure on detected display interface.

Since, the existing driver using rk3288 vop mode settings enabling
the same will result wrong display interface configuration for rk3399.

Add the patch for fixing these vop modes for rk3399.

Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
 arch/arm/include/asm/arch-rockchip/vop_rk3288.h | 11 +++++++++++
 drivers/video/rockchip/rk3399_vop.c             |  2 --
 drivers/video/rockchip/rk_vop.c                 |  4 ++++
 3 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
index 8398249509..872a158b71 100644
--- a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
+++ b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
@@ -85,6 +85,16 @@ enum {
 	LB_RGB_1280X8 = 0x5
 };
 
+#if defined(CONFIG_ROCKCHIP_RK3399)
+enum vop_modes {
+	VOP_MODE_EDP = 0,
+	VOP_MODE_MIPI,
+	VOP_MODE_HDMI,
+	VOP_MODE_MIPI1,
+	VOP_MODE_DP,
+	VOP_MODE_NONE,
+};
+#else
 enum vop_modes {
 	VOP_MODE_EDP = 0,
 	VOP_MODE_HDMI,
@@ -94,6 +104,7 @@ enum vop_modes {
 	VOP_MODE_AUTO_DETECT,
 	VOP_MODE_UNKNOWN,
 };
+#endif
 
 /* VOP_VERSION_INFO */
 #define M_FPGA_VERSION (0xffff << 16)
diff --git a/drivers/video/rockchip/rk3399_vop.c b/drivers/video/rockchip/rk3399_vop.c
index 81c122d7a9..1d5b3931a6 100644
--- a/drivers/video/rockchip/rk3399_vop.c
+++ b/drivers/video/rockchip/rk3399_vop.c
@@ -45,8 +45,6 @@ static void rk3399_set_pin_polarity(struct udevice *dev,
 				V_RK3399_DSP_MIPI_POL(polarity));
 		break;
 
-	case VOP_MODE_LVDS:
-		/* The RK3399 has neither parallel RGB nor LVDS output. */
 	default:
 		debug("%s: unsupported output mode %x\n", __func__, mode);
 	}
diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c
index b56c3f336c..bdb790a0c5 100644
--- a/drivers/video/rockchip/rk_vop.c
+++ b/drivers/video/rockchip/rk_vop.c
@@ -117,10 +117,12 @@ static void rkvop_enable_output(struct udevice *dev, enum vop_modes mode)
 				V_EDP_OUT_EN(1));
 		break;
 
+#if defined(CONFIG_ROCKCHIP_RK3288)
 	case VOP_MODE_LVDS:
 		clrsetbits_le32(&regs->sys_ctrl, M_ALL_OUT_EN,
 				V_RGB_OUT_EN(1));
 		break;
+#endif
 
 	case VOP_MODE_MIPI:
 		clrsetbits_le32(&regs->sys_ctrl, M_ALL_OUT_EN,
@@ -312,7 +314,9 @@ static int rk_display_init(struct udevice *dev, ulong fbbase, ofnode ep_node)
 	/* Set bitwidth for vop display according to vop mode */
 	switch (vop_id) {
 	case VOP_MODE_EDP:
+#if defined(CONFIG_ROCKCHIP_RK3288)
 	case VOP_MODE_LVDS:
+#endif
 		l2bpp = VIDEO_BPP16;
 		break;
 	case VOP_MODE_HDMI:
-- 
2.18.0.321.gffc6fa0e3

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 2/4] video: rockchip: Fix vop modes for rk3399
@ 2020-01-23 16:28     ` Jagan Teki
  0 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-01-23 16:28 UTC (permalink / raw)
  To: u-boot

VOP display endpoint pipeline configuration is differs
between rk3288 vs rk3399.

These VOP pipeline configuration depends on how the
different display interfaces connected in sequence to
IN and OUT ports like for,

RK3288:

vopb_out: port {
	#address-cells = <1>;
	#size-cells = <0>;
	vopb_out_edp: endpoint at 0 {
		reg = <0>;
		remote-endpoint = <&edp_in_vopb>;
	};
	vopb_out_hdmi: endpoint at 1 {
		reg = <1>;
                remote-endpoint = <&hdmi_in_vopb>;
        };
        vopb_out_lvds: endpoint at 2 {
                reg = <2>;
                remote-endpoint = <&lvds_in_vopb>;
        };
        vopb_out_mipi: endpoint at 3 {
                reg = <3>;
                remote-endpoint = <&mipi_in_vopb>;
        };
};

RK3399:

vopb_out: port {
         #address-cells = <1>;
         #size-cells = <0>;
         vopb_out_edp: endpoint at 0 {
                reg = <0>;
                remote-endpoint = <&edp_in_vopb>;
         };
         vopb_out_mipi: endpoint at 1 {
                reg = <1>;
                remote-endpoint = <&mipi_in_vopb>;
         };
         vopb_out_hdmi: endpoint at 2 {
                reg = <2>;
                remote-endpoint = <&hdmi_in_vopb>;
         };
         vopb_out_mipi1: endpoint at 3 {
                reg = <3>;
                remote-endpoint = <&mipi1_in_vopb>;
         };
         vopb_out_dp: endpoint at 4 {
                reg = <4>;
                remote-endpoint = <&dp_in_vopb>;
         };
};

here, HDMI interface has endpoint 1 in rk3288 and 2 in rk3399.

The rockchip vop driver often depends on this determined endpoint
number and stored in vop_mode. So based on this vop_mode the bpp
and pin polarity would configure on detected display interface.

Since, the existing driver using rk3288 vop mode settings enabling
the same will result wrong display interface configuration for rk3399.

Add the patch for fixing these vop modes for rk3399.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/include/asm/arch-rockchip/vop_rk3288.h | 11 +++++++++++
 drivers/video/rockchip/rk3399_vop.c             |  2 --
 drivers/video/rockchip/rk_vop.c                 |  4 ++++
 3 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
index 8398249509..872a158b71 100644
--- a/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
+++ b/arch/arm/include/asm/arch-rockchip/vop_rk3288.h
@@ -85,6 +85,16 @@ enum {
 	LB_RGB_1280X8 = 0x5
 };
 
+#if defined(CONFIG_ROCKCHIP_RK3399)
+enum vop_modes {
+	VOP_MODE_EDP = 0,
+	VOP_MODE_MIPI,
+	VOP_MODE_HDMI,
+	VOP_MODE_MIPI1,
+	VOP_MODE_DP,
+	VOP_MODE_NONE,
+};
+#else
 enum vop_modes {
 	VOP_MODE_EDP = 0,
 	VOP_MODE_HDMI,
@@ -94,6 +104,7 @@ enum vop_modes {
 	VOP_MODE_AUTO_DETECT,
 	VOP_MODE_UNKNOWN,
 };
+#endif
 
 /* VOP_VERSION_INFO */
 #define M_FPGA_VERSION (0xffff << 16)
diff --git a/drivers/video/rockchip/rk3399_vop.c b/drivers/video/rockchip/rk3399_vop.c
index 81c122d7a9..1d5b3931a6 100644
--- a/drivers/video/rockchip/rk3399_vop.c
+++ b/drivers/video/rockchip/rk3399_vop.c
@@ -45,8 +45,6 @@ static void rk3399_set_pin_polarity(struct udevice *dev,
 				V_RK3399_DSP_MIPI_POL(polarity));
 		break;
 
-	case VOP_MODE_LVDS:
-		/* The RK3399 has neither parallel RGB nor LVDS output. */
 	default:
 		debug("%s: unsupported output mode %x\n", __func__, mode);
 	}
diff --git a/drivers/video/rockchip/rk_vop.c b/drivers/video/rockchip/rk_vop.c
index b56c3f336c..bdb790a0c5 100644
--- a/drivers/video/rockchip/rk_vop.c
+++ b/drivers/video/rockchip/rk_vop.c
@@ -117,10 +117,12 @@ static void rkvop_enable_output(struct udevice *dev, enum vop_modes mode)
 				V_EDP_OUT_EN(1));
 		break;
 
+#if defined(CONFIG_ROCKCHIP_RK3288)
 	case VOP_MODE_LVDS:
 		clrsetbits_le32(&regs->sys_ctrl, M_ALL_OUT_EN,
 				V_RGB_OUT_EN(1));
 		break;
+#endif
 
 	case VOP_MODE_MIPI:
 		clrsetbits_le32(&regs->sys_ctrl, M_ALL_OUT_EN,
@@ -312,7 +314,9 @@ static int rk_display_init(struct udevice *dev, ulong fbbase, ofnode ep_node)
 	/* Set bitwidth for vop display according to vop mode */
 	switch (vop_id) {
 	case VOP_MODE_EDP:
+#if defined(CONFIG_ROCKCHIP_RK3288)
 	case VOP_MODE_LVDS:
+#endif
 		l2bpp = VIDEO_BPP16;
 		break;
 	case VOP_MODE_HDMI:
-- 
2.18.0.321.gffc6fa0e3

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 3/4] rockchip: Enable pre console for rk3399
  2020-01-23 16:28 ` Jagan Teki
@ 2020-01-23 16:28     ` Jagan Teki
  -1 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-01-23 16:28 UTC (permalink / raw)
  To: Kever Yang, Simon Glass, Philipp Tomsich
  Cc: u-boot-0aAXYlwwYIKGBzrmiIFOJg, Michael Trimarchi,
	linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
	Jagan Teki, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

Enable pre console buffer for rk3399 platform.

This would help to capture the console messages prior to
the console being initialised. Enabling this would help
to capture all the console messages on video output source
like HDMI. So we can find the full console messages of
U-Boot proper on HDMI display when enabled it for RK3399
platform boards.

Buffer address used for pre console is 0x0f200000 which is
ram base plus 240MiB. right now the Allwinner SoC is using
similar computation.

Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
 arch/arm/mach-rockchip/Kconfig | 1 +
 common/Kconfig                 | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index ed7514ab75..0cb1f23d0f 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -229,6 +229,7 @@ config ROCKCHIP_RK3399
 	select DM_PMIC
 	select DM_REGULATOR_FIXED
 	select BOARD_LATE_INIT
+	imply PRE_CONSOLE_BUFFER
 	imply ROCKCHIP_COMMON_BOARD
 	imply ROCKCHIP_SDRAM_COMMON
 	imply SPL_ROCKCHIP_COMMON_BOARD
diff --git a/common/Kconfig b/common/Kconfig
index 21d0244050..7d81924340 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -568,6 +568,7 @@ config PRE_CON_BUF_ADDR
 	default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I
 	default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I
 	default 0x0f000000 if ROCKCHIP_RK3288
+	default 0x0f200000 if ROCKCHIP_RK3399
 	help
 	  This sets the start address of the pre-console buffer. This must
 	  be in available memory and is accessed before relocation and
-- 
2.18.0.321.gffc6fa0e3

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 3/4] rockchip: Enable pre console for rk3399
@ 2020-01-23 16:28     ` Jagan Teki
  0 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-01-23 16:28 UTC (permalink / raw)
  To: u-boot

Enable pre console buffer for rk3399 platform.

This would help to capture the console messages prior to
the console being initialised. Enabling this would help
to capture all the console messages on video output source
like HDMI. So we can find the full console messages of
U-Boot proper on HDMI display when enabled it for RK3399
platform boards.

Buffer address used for pre console is 0x0f200000 which is
ram base plus 240MiB. right now the Allwinner SoC is using
similar computation.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 arch/arm/mach-rockchip/Kconfig | 1 +
 common/Kconfig                 | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index ed7514ab75..0cb1f23d0f 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -229,6 +229,7 @@ config ROCKCHIP_RK3399
 	select DM_PMIC
 	select DM_REGULATOR_FIXED
 	select BOARD_LATE_INIT
+	imply PRE_CONSOLE_BUFFER
 	imply ROCKCHIP_COMMON_BOARD
 	imply ROCKCHIP_SDRAM_COMMON
 	imply SPL_ROCKCHIP_COMMON_BOARD
diff --git a/common/Kconfig b/common/Kconfig
index 21d0244050..7d81924340 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -568,6 +568,7 @@ config PRE_CON_BUF_ADDR
 	default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I
 	default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I
 	default 0x0f000000 if ROCKCHIP_RK3288
+	default 0x0f200000 if ROCKCHIP_RK3399
 	help
 	  This sets the start address of the pre-console buffer. This must
 	  be in available memory and is accessed before relocation and
-- 
2.18.0.321.gffc6fa0e3

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
  2020-01-23 16:28 ` Jagan Teki
@ 2020-01-23 16:28     ` Jagan Teki
  -1 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-01-23 16:28 UTC (permalink / raw)
  To: Kever Yang, Simon Glass, Philipp Tomsich
  Cc: u-boot-0aAXYlwwYIKGBzrmiIFOJg, Michael Trimarchi,
	linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/,
	Jagan Teki, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

Enable config options and console setting to respective
rk3399 board for HDMI output.

Boards supported and tested on this patch are:
- NanoPc T4
- NanoPi M4
- NanoPi Neo4
- ROC-RK3399-PC

Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
 configs/nanopc-t4-rk3399_defconfig   | 6 ++++++
 configs/nanopi-m4-rk3399_defconfig   | 6 ++++++
 configs/nanopi-neo4-rk3399_defconfig | 6 ++++++
 configs/roc-pc-rk3399_defconfig      | 6 ++++++
 include/configs/evb_rk3399.h         | 5 +++++
 5 files changed, 29 insertions(+)

diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
index bd6d60ff6c..17e8a18d31 100644
--- a/configs/nanopc-t4-rk3399_defconfig
+++ b/configs/nanopc-t4-rk3399_defconfig
@@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
index 74ede13c23..b73b2fdc27 100644
--- a/configs/nanopi-m4-rk3399_defconfig
+++ b/configs/nanopi-m4-rk3399_defconfig
@@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
index a44124aac0..2ecb50967b 100644
--- a/configs/nanopi-neo4-rk3399_defconfig
+++ b/configs/nanopi-neo4-rk3399_defconfig
@@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
index 3a051d9b0c..a9f99f992d 100644
--- a/configs/roc-pc-rk3399_defconfig
+++ b/configs/roc-pc-rk3399_defconfig
@@ -56,3 +56,9 @@ CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/include/configs/evb_rk3399.h b/include/configs/evb_rk3399.h
index c0b0358893..09eb361655 100644
--- a/include/configs/evb_rk3399.h
+++ b/include/configs/evb_rk3399.h
@@ -6,6 +6,11 @@
 #ifndef __EVB_RK3399_H
 #define __EVB_RK3399_H
 
+#define ROCKCHIP_DEVICE_SETTINGS \
+		"stdin=serial,cros-ec-keyb\0" \
+		"stdout=serial,vidconsole\0" \
+		"stderr=serial,vidconsole\0"
+
 #include <configs/rk3399_common.h>
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
-- 
2.18.0.321.gffc6fa0e3

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
@ 2020-01-23 16:28     ` Jagan Teki
  0 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-01-23 16:28 UTC (permalink / raw)
  To: u-boot

Enable config options and console setting to respective
rk3399 board for HDMI output.

Boards supported and tested on this patch are:
- NanoPc T4
- NanoPi M4
- NanoPi Neo4
- ROC-RK3399-PC

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 configs/nanopc-t4-rk3399_defconfig   | 6 ++++++
 configs/nanopi-m4-rk3399_defconfig   | 6 ++++++
 configs/nanopi-neo4-rk3399_defconfig | 6 ++++++
 configs/roc-pc-rk3399_defconfig      | 6 ++++++
 include/configs/evb_rk3399.h         | 5 +++++
 5 files changed, 29 insertions(+)

diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
index bd6d60ff6c..17e8a18d31 100644
--- a/configs/nanopc-t4-rk3399_defconfig
+++ b/configs/nanopc-t4-rk3399_defconfig
@@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
index 74ede13c23..b73b2fdc27 100644
--- a/configs/nanopi-m4-rk3399_defconfig
+++ b/configs/nanopi-m4-rk3399_defconfig
@@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
index a44124aac0..2ecb50967b 100644
--- a/configs/nanopi-neo4-rk3399_defconfig
+++ b/configs/nanopi-neo4-rk3399_defconfig
@@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
index 3a051d9b0c..a9f99f992d 100644
--- a/configs/roc-pc-rk3399_defconfig
+++ b/configs/roc-pc-rk3399_defconfig
@@ -56,3 +56,9 @@ CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_BPP16=y
+CONFIG_VIDEO_BPP32=y
+CONFIG_DISPLAY=y
+CONFIG_VIDEO_ROCKCHIP=y
+CONFIG_DISPLAY_ROCKCHIP_HDMI=y
diff --git a/include/configs/evb_rk3399.h b/include/configs/evb_rk3399.h
index c0b0358893..09eb361655 100644
--- a/include/configs/evb_rk3399.h
+++ b/include/configs/evb_rk3399.h
@@ -6,6 +6,11 @@
 #ifndef __EVB_RK3399_H
 #define __EVB_RK3399_H
 
+#define ROCKCHIP_DEVICE_SETTINGS \
+		"stdin=serial,cros-ec-keyb\0" \
+		"stdout=serial,vidconsole\0" \
+		"stderr=serial,vidconsole\0"
+
 #include <configs/rk3399_common.h>
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
-- 
2.18.0.321.gffc6fa0e3

^ permalink raw reply related	[flat|nested] 22+ messages in thread
* Re: [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
  2020-01-23 16:28     ` Jagan Teki
@ 2020-01-24 15:27       ` Tom Rini
  -1 siblings, 0 replies; 22+ messages in thread
From: Tom Rini @ 2020-01-24 15:27 UTC (permalink / raw)
  To: Jagan Teki, Anatolij Gustschin; +Cc: linux-rockchip, u-boot, linux-amarula

[-- Attachment #1: Type: text/plain, Size: 3513 bytes --]

On Thu, Jan 23, 2020 at 09:58:45PM +0530, Jagan Teki wrote:

> Enable config options and console setting to respective
> rk3399 board for HDMI output.
> 
> Boards supported and tested on this patch are:
> - NanoPc T4
> - NanoPi M4
> - NanoPi Neo4
> - ROC-RK3399-PC
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  configs/nanopc-t4-rk3399_defconfig   | 6 ++++++
>  configs/nanopi-m4-rk3399_defconfig   | 6 ++++++
>  configs/nanopi-neo4-rk3399_defconfig | 6 ++++++
>  configs/roc-pc-rk3399_defconfig      | 6 ++++++
>  include/configs/evb_rk3399.h         | 5 +++++
>  5 files changed, 29 insertions(+)
> 
> diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
> index bd6d60ff6c..17e8a18d31 100644
> --- a/configs/nanopc-t4-rk3399_defconfig
> +++ b/configs/nanopc-t4-rk3399_defconfig
> @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
>  CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_SPL_TINY_MEMSET=y
>  CONFIG_ERRNO_STR=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_VIDEO_BPP16=y
> +CONFIG_VIDEO_BPP32=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
> index 74ede13c23..b73b2fdc27 100644
> --- a/configs/nanopi-m4-rk3399_defconfig
> +++ b/configs/nanopi-m4-rk3399_defconfig
> @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
>  CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_SPL_TINY_MEMSET=y
>  CONFIG_ERRNO_STR=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_VIDEO_BPP16=y
> +CONFIG_VIDEO_BPP32=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
> index a44124aac0..2ecb50967b 100644
> --- a/configs/nanopi-neo4-rk3399_defconfig
> +++ b/configs/nanopi-neo4-rk3399_defconfig
> @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
>  CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_SPL_TINY_MEMSET=y
>  CONFIG_ERRNO_STR=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_VIDEO_BPP16=y
> +CONFIG_VIDEO_BPP32=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
> index 3a051d9b0c..a9f99f992d 100644
> --- a/configs/roc-pc-rk3399_defconfig
> +++ b/configs/roc-pc-rk3399_defconfig
> @@ -56,3 +56,9 @@ CONFIG_USB_ETHER_RTL8152=y
>  CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_SPL_TINY_MEMSET=y
>  CONFIG_ERRNO_STR=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_VIDEO_BPP16=y
> +CONFIG_VIDEO_BPP32=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> diff --git a/include/configs/evb_rk3399.h b/include/configs/evb_rk3399.h
> index c0b0358893..09eb361655 100644
> --- a/include/configs/evb_rk3399.h
> +++ b/include/configs/evb_rk3399.h
> @@ -6,6 +6,11 @@
>  #ifndef __EVB_RK3399_H
>  #define __EVB_RK3399_H
>  
> +#define ROCKCHIP_DEVICE_SETTINGS \
> +		"stdin=serial,cros-ec-keyb\0" \
> +		"stdout=serial,vidconsole\0" \
> +		"stderr=serial,vidconsole\0"
> +
>  #include <configs/rk3399_common.h>
>  
>  #if defined(CONFIG_ENV_IS_IN_MMC)

This seems like another commit (along with the question I saw about
i.MX FB not showing the right colors) 2cc393f32fd9 needs to be reworked
so that we default to enabling everything still but let boards opt out
rather than forcing everyone to opt-in as it seems like there's a lot of
cases where people need to opt-in and didn't know.

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
@ 2020-01-24 15:27       ` Tom Rini
  0 siblings, 0 replies; 22+ messages in thread
From: Tom Rini @ 2020-01-24 15:27 UTC (permalink / raw)
  To: u-boot

On Thu, Jan 23, 2020 at 09:58:45PM +0530, Jagan Teki wrote:

> Enable config options and console setting to respective
> rk3399 board for HDMI output.
> 
> Boards supported and tested on this patch are:
> - NanoPc T4
> - NanoPi M4
> - NanoPi Neo4
> - ROC-RK3399-PC
> 
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  configs/nanopc-t4-rk3399_defconfig   | 6 ++++++
>  configs/nanopi-m4-rk3399_defconfig   | 6 ++++++
>  configs/nanopi-neo4-rk3399_defconfig | 6 ++++++
>  configs/roc-pc-rk3399_defconfig      | 6 ++++++
>  include/configs/evb_rk3399.h         | 5 +++++
>  5 files changed, 29 insertions(+)
> 
> diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
> index bd6d60ff6c..17e8a18d31 100644
> --- a/configs/nanopc-t4-rk3399_defconfig
> +++ b/configs/nanopc-t4-rk3399_defconfig
> @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
>  CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_SPL_TINY_MEMSET=y
>  CONFIG_ERRNO_STR=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_VIDEO_BPP16=y
> +CONFIG_VIDEO_BPP32=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
> index 74ede13c23..b73b2fdc27 100644
> --- a/configs/nanopi-m4-rk3399_defconfig
> +++ b/configs/nanopi-m4-rk3399_defconfig
> @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
>  CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_SPL_TINY_MEMSET=y
>  CONFIG_ERRNO_STR=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_VIDEO_BPP16=y
> +CONFIG_VIDEO_BPP32=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
> index a44124aac0..2ecb50967b 100644
> --- a/configs/nanopi-neo4-rk3399_defconfig
> +++ b/configs/nanopi-neo4-rk3399_defconfig
> @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
>  CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_SPL_TINY_MEMSET=y
>  CONFIG_ERRNO_STR=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_VIDEO_BPP16=y
> +CONFIG_VIDEO_BPP32=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
> index 3a051d9b0c..a9f99f992d 100644
> --- a/configs/roc-pc-rk3399_defconfig
> +++ b/configs/roc-pc-rk3399_defconfig
> @@ -56,3 +56,9 @@ CONFIG_USB_ETHER_RTL8152=y
>  CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_SPL_TINY_MEMSET=y
>  CONFIG_ERRNO_STR=y
> +CONFIG_DM_VIDEO=y
> +CONFIG_VIDEO_BPP16=y
> +CONFIG_VIDEO_BPP32=y
> +CONFIG_DISPLAY=y
> +CONFIG_VIDEO_ROCKCHIP=y
> +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> diff --git a/include/configs/evb_rk3399.h b/include/configs/evb_rk3399.h
> index c0b0358893..09eb361655 100644
> --- a/include/configs/evb_rk3399.h
> +++ b/include/configs/evb_rk3399.h
> @@ -6,6 +6,11 @@
>  #ifndef __EVB_RK3399_H
>  #define __EVB_RK3399_H
>  
> +#define ROCKCHIP_DEVICE_SETTINGS \
> +		"stdin=serial,cros-ec-keyb\0" \
> +		"stdout=serial,vidconsole\0" \
> +		"stderr=serial,vidconsole\0"
> +
>  #include <configs/rk3399_common.h>
>  
>  #if defined(CONFIG_ENV_IS_IN_MMC)

This seems like another commit (along with the question I saw about
i.MX FB not showing the right colors) 2cc393f32fd9 needs to be reworked
so that we default to enabling everything still but let boards opt out
rather than forcing everyone to opt-in as it seems like there's a lot of
cases where people need to opt-in and didn't know.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200124/e5307bbf/attachment.sig>

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
  2020-01-24 15:27       ` Tom Rini
@ 2020-01-24 17:03         ` Anatolij Gustschin
  -1 siblings, 0 replies; 22+ messages in thread
From: Anatolij Gustschin @ 2020-01-24 17:03 UTC (permalink / raw)
  To: Tom Rini; +Cc: linux-rockchip, u-boot, linux-amarula

On Fri, 24 Jan 2020 10:27:35 -0500
Tom Rini trini@konsulko.com wrote:

> This seems like another commit (along with the question I saw about
> i.MX FB not showing the right colors) 2cc393f32fd9 needs to be reworked
> so that we default to enabling everything still but let boards opt out
> rather than forcing everyone to opt-in as it seems like there's a lot of
> cases where people need to opt-in and didn't know.

yes, I'll rework this.

--
Anatolij

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
@ 2020-01-24 17:03         ` Anatolij Gustschin
  0 siblings, 0 replies; 22+ messages in thread
From: Anatolij Gustschin @ 2020-01-24 17:03 UTC (permalink / raw)
  To: u-boot

On Fri, 24 Jan 2020 10:27:35 -0500
Tom Rini trini at konsulko.com wrote:

> This seems like another commit (along with the question I saw about
> i.MX FB not showing the right colors) 2cc393f32fd9 needs to be reworked
> so that we default to enabling everything still but let boards opt out
> rather than forcing everyone to opt-in as it seems like there's a lot of
> cases where people need to opt-in and didn't know.

yes, I'll rework this.

--
Anatolij

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
  2020-01-24 15:27       ` Tom Rini
@ 2020-02-03 11:25         ` Jagan Teki
  -1 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-02-03 11:25 UTC (permalink / raw)
  To: Tom Rini; +Cc: open list:ARM/Rockchip SoC..., U-Boot-Denx, linux-amarula

On Fri, Jan 24, 2020 at 8:57 PM Tom Rini <trini@konsulko.com> wrote:
>
> On Thu, Jan 23, 2020 at 09:58:45PM +0530, Jagan Teki wrote:
>
> > Enable config options and console setting to respective
> > rk3399 board for HDMI output.
> >
> > Boards supported and tested on this patch are:
> > - NanoPc T4
> > - NanoPi M4
> > - NanoPi Neo4
> > - ROC-RK3399-PC
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> >  configs/nanopc-t4-rk3399_defconfig   | 6 ++++++
> >  configs/nanopi-m4-rk3399_defconfig   | 6 ++++++
> >  configs/nanopi-neo4-rk3399_defconfig | 6 ++++++
> >  configs/roc-pc-rk3399_defconfig      | 6 ++++++
> >  include/configs/evb_rk3399.h         | 5 +++++
> >  5 files changed, 29 insertions(+)
> >
> > diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
> > index bd6d60ff6c..17e8a18d31 100644
> > --- a/configs/nanopc-t4-rk3399_defconfig
> > +++ b/configs/nanopc-t4-rk3399_defconfig
> > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> >  CONFIG_USB_ETHER_SMSC95XX=y
> >  CONFIG_SPL_TINY_MEMSET=y
> >  CONFIG_ERRNO_STR=y
> > +CONFIG_DM_VIDEO=y
> > +CONFIG_VIDEO_BPP16=y
> > +CONFIG_VIDEO_BPP32=y
> > +CONFIG_DISPLAY=y
> > +CONFIG_VIDEO_ROCKCHIP=y
> > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
> > index 74ede13c23..b73b2fdc27 100644
> > --- a/configs/nanopi-m4-rk3399_defconfig
> > +++ b/configs/nanopi-m4-rk3399_defconfig
> > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> >  CONFIG_USB_ETHER_SMSC95XX=y
> >  CONFIG_SPL_TINY_MEMSET=y
> >  CONFIG_ERRNO_STR=y
> > +CONFIG_DM_VIDEO=y
> > +CONFIG_VIDEO_BPP16=y
> > +CONFIG_VIDEO_BPP32=y
> > +CONFIG_DISPLAY=y
> > +CONFIG_VIDEO_ROCKCHIP=y
> > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
> > index a44124aac0..2ecb50967b 100644
> > --- a/configs/nanopi-neo4-rk3399_defconfig
> > +++ b/configs/nanopi-neo4-rk3399_defconfig
> > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> >  CONFIG_USB_ETHER_SMSC95XX=y
> >  CONFIG_SPL_TINY_MEMSET=y
> >  CONFIG_ERRNO_STR=y
> > +CONFIG_DM_VIDEO=y
> > +CONFIG_VIDEO_BPP16=y
> > +CONFIG_VIDEO_BPP32=y
> > +CONFIG_DISPLAY=y
> > +CONFIG_VIDEO_ROCKCHIP=y
> > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
> > index 3a051d9b0c..a9f99f992d 100644
> > --- a/configs/roc-pc-rk3399_defconfig
> > +++ b/configs/roc-pc-rk3399_defconfig
> > @@ -56,3 +56,9 @@ CONFIG_USB_ETHER_RTL8152=y
> >  CONFIG_USB_ETHER_SMSC95XX=y
> >  CONFIG_SPL_TINY_MEMSET=y
> >  CONFIG_ERRNO_STR=y
> > +CONFIG_DM_VIDEO=y
> > +CONFIG_VIDEO_BPP16=y
> > +CONFIG_VIDEO_BPP32=y
> > +CONFIG_DISPLAY=y
> > +CONFIG_VIDEO_ROCKCHIP=y
> > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > diff --git a/include/configs/evb_rk3399.h b/include/configs/evb_rk3399.h
> > index c0b0358893..09eb361655 100644
> > --- a/include/configs/evb_rk3399.h
> > +++ b/include/configs/evb_rk3399.h
> > @@ -6,6 +6,11 @@
> >  #ifndef __EVB_RK3399_H
> >  #define __EVB_RK3399_H
> >
> > +#define ROCKCHIP_DEVICE_SETTINGS \
> > +             "stdin=serial,cros-ec-keyb\0" \
> > +             "stdout=serial,vidconsole\0" \
> > +             "stderr=serial,vidconsole\0"
> > +
> >  #include <configs/rk3399_common.h>
> >
> >  #if defined(CONFIG_ENV_IS_IN_MMC)
>
> This seems like another commit (along with the question I saw about
> i.MX FB not showing the right colors) 2cc393f32fd9 needs to be reworked
> so that we default to enabling everything still but let boards opt out
> rather than forcing everyone to opt-in as it seems like there's a lot of
> cases where people need to opt-in and didn't know.

yes, this evb board config is common across most of the rk3399
defconfig boards. this patch enable hdmi on few rk3399 boards all use
same config file, evb_rk3399.h

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
@ 2020-02-03 11:25         ` Jagan Teki
  0 siblings, 0 replies; 22+ messages in thread
From: Jagan Teki @ 2020-02-03 11:25 UTC (permalink / raw)
  To: u-boot

On Fri, Jan 24, 2020 at 8:57 PM Tom Rini <trini@konsulko.com> wrote:
>
> On Thu, Jan 23, 2020 at 09:58:45PM +0530, Jagan Teki wrote:
>
> > Enable config options and console setting to respective
> > rk3399 board for HDMI output.
> >
> > Boards supported and tested on this patch are:
> > - NanoPc T4
> > - NanoPi M4
> > - NanoPi Neo4
> > - ROC-RK3399-PC
> >
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > ---
> >  configs/nanopc-t4-rk3399_defconfig   | 6 ++++++
> >  configs/nanopi-m4-rk3399_defconfig   | 6 ++++++
> >  configs/nanopi-neo4-rk3399_defconfig | 6 ++++++
> >  configs/roc-pc-rk3399_defconfig      | 6 ++++++
> >  include/configs/evb_rk3399.h         | 5 +++++
> >  5 files changed, 29 insertions(+)
> >
> > diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
> > index bd6d60ff6c..17e8a18d31 100644
> > --- a/configs/nanopc-t4-rk3399_defconfig
> > +++ b/configs/nanopc-t4-rk3399_defconfig
> > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> >  CONFIG_USB_ETHER_SMSC95XX=y
> >  CONFIG_SPL_TINY_MEMSET=y
> >  CONFIG_ERRNO_STR=y
> > +CONFIG_DM_VIDEO=y
> > +CONFIG_VIDEO_BPP16=y
> > +CONFIG_VIDEO_BPP32=y
> > +CONFIG_DISPLAY=y
> > +CONFIG_VIDEO_ROCKCHIP=y
> > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
> > index 74ede13c23..b73b2fdc27 100644
> > --- a/configs/nanopi-m4-rk3399_defconfig
> > +++ b/configs/nanopi-m4-rk3399_defconfig
> > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> >  CONFIG_USB_ETHER_SMSC95XX=y
> >  CONFIG_SPL_TINY_MEMSET=y
> >  CONFIG_ERRNO_STR=y
> > +CONFIG_DM_VIDEO=y
> > +CONFIG_VIDEO_BPP16=y
> > +CONFIG_VIDEO_BPP32=y
> > +CONFIG_DISPLAY=y
> > +CONFIG_VIDEO_ROCKCHIP=y
> > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
> > index a44124aac0..2ecb50967b 100644
> > --- a/configs/nanopi-neo4-rk3399_defconfig
> > +++ b/configs/nanopi-neo4-rk3399_defconfig
> > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> >  CONFIG_USB_ETHER_SMSC95XX=y
> >  CONFIG_SPL_TINY_MEMSET=y
> >  CONFIG_ERRNO_STR=y
> > +CONFIG_DM_VIDEO=y
> > +CONFIG_VIDEO_BPP16=y
> > +CONFIG_VIDEO_BPP32=y
> > +CONFIG_DISPLAY=y
> > +CONFIG_VIDEO_ROCKCHIP=y
> > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
> > index 3a051d9b0c..a9f99f992d 100644
> > --- a/configs/roc-pc-rk3399_defconfig
> > +++ b/configs/roc-pc-rk3399_defconfig
> > @@ -56,3 +56,9 @@ CONFIG_USB_ETHER_RTL8152=y
> >  CONFIG_USB_ETHER_SMSC95XX=y
> >  CONFIG_SPL_TINY_MEMSET=y
> >  CONFIG_ERRNO_STR=y
> > +CONFIG_DM_VIDEO=y
> > +CONFIG_VIDEO_BPP16=y
> > +CONFIG_VIDEO_BPP32=y
> > +CONFIG_DISPLAY=y
> > +CONFIG_VIDEO_ROCKCHIP=y
> > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > diff --git a/include/configs/evb_rk3399.h b/include/configs/evb_rk3399.h
> > index c0b0358893..09eb361655 100644
> > --- a/include/configs/evb_rk3399.h
> > +++ b/include/configs/evb_rk3399.h
> > @@ -6,6 +6,11 @@
> >  #ifndef __EVB_RK3399_H
> >  #define __EVB_RK3399_H
> >
> > +#define ROCKCHIP_DEVICE_SETTINGS \
> > +             "stdin=serial,cros-ec-keyb\0" \
> > +             "stdout=serial,vidconsole\0" \
> > +             "stderr=serial,vidconsole\0"
> > +
> >  #include <configs/rk3399_common.h>
> >
> >  #if defined(CONFIG_ENV_IS_IN_MMC)
>
> This seems like another commit (along with the question I saw about
> i.MX FB not showing the right colors) 2cc393f32fd9 needs to be reworked
> so that we default to enabling everything still but let boards opt out
> rather than forcing everyone to opt-in as it seems like there's a lot of
> cases where people need to opt-in and didn't know.

yes, this evb board config is common across most of the rk3399
defconfig boards. this patch enable hdmi on few rk3399 boards all use
same config file, evb_rk3399.h

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
  2020-02-03 11:25         ` Jagan Teki
@ 2020-02-03 14:47           ` Tom Rini
  -1 siblings, 0 replies; 22+ messages in thread
From: Tom Rini @ 2020-02-03 14:47 UTC (permalink / raw)
  To: Jagan Teki, Anatolij Gustschin
  Cc: open list:ARM/Rockchip SoC..., U-Boot-Denx, linux-amarula

[-- Attachment #1: Type: text/plain, Size: 4629 bytes --]

On Mon, Feb 03, 2020 at 04:55:27PM +0530, Jagan Teki wrote:
> On Fri, Jan 24, 2020 at 8:57 PM Tom Rini <trini@konsulko.com> wrote:
> >
> > On Thu, Jan 23, 2020 at 09:58:45PM +0530, Jagan Teki wrote:
> >
> > > Enable config options and console setting to respective
> > > rk3399 board for HDMI output.
> > >
> > > Boards supported and tested on this patch are:
> > > - NanoPc T4
> > > - NanoPi M4
> > > - NanoPi Neo4
> > > - ROC-RK3399-PC
> > >
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > ---
> > >  configs/nanopc-t4-rk3399_defconfig   | 6 ++++++
> > >  configs/nanopi-m4-rk3399_defconfig   | 6 ++++++
> > >  configs/nanopi-neo4-rk3399_defconfig | 6 ++++++
> > >  configs/roc-pc-rk3399_defconfig      | 6 ++++++
> > >  include/configs/evb_rk3399.h         | 5 +++++
> > >  5 files changed, 29 insertions(+)
> > >
> > > diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
> > > index bd6d60ff6c..17e8a18d31 100644
> > > --- a/configs/nanopc-t4-rk3399_defconfig
> > > +++ b/configs/nanopc-t4-rk3399_defconfig
> > > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> > >  CONFIG_USB_ETHER_SMSC95XX=y
> > >  CONFIG_SPL_TINY_MEMSET=y
> > >  CONFIG_ERRNO_STR=y
> > > +CONFIG_DM_VIDEO=y
> > > +CONFIG_VIDEO_BPP16=y
> > > +CONFIG_VIDEO_BPP32=y
> > > +CONFIG_DISPLAY=y
> > > +CONFIG_VIDEO_ROCKCHIP=y
> > > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > > diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
> > > index 74ede13c23..b73b2fdc27 100644
> > > --- a/configs/nanopi-m4-rk3399_defconfig
> > > +++ b/configs/nanopi-m4-rk3399_defconfig
> > > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> > >  CONFIG_USB_ETHER_SMSC95XX=y
> > >  CONFIG_SPL_TINY_MEMSET=y
> > >  CONFIG_ERRNO_STR=y
> > > +CONFIG_DM_VIDEO=y
> > > +CONFIG_VIDEO_BPP16=y
> > > +CONFIG_VIDEO_BPP32=y
> > > +CONFIG_DISPLAY=y
> > > +CONFIG_VIDEO_ROCKCHIP=y
> > > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > > diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
> > > index a44124aac0..2ecb50967b 100644
> > > --- a/configs/nanopi-neo4-rk3399_defconfig
> > > +++ b/configs/nanopi-neo4-rk3399_defconfig
> > > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> > >  CONFIG_USB_ETHER_SMSC95XX=y
> > >  CONFIG_SPL_TINY_MEMSET=y
> > >  CONFIG_ERRNO_STR=y
> > > +CONFIG_DM_VIDEO=y
> > > +CONFIG_VIDEO_BPP16=y
> > > +CONFIG_VIDEO_BPP32=y
> > > +CONFIG_DISPLAY=y
> > > +CONFIG_VIDEO_ROCKCHIP=y
> > > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > > diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
> > > index 3a051d9b0c..a9f99f992d 100644
> > > --- a/configs/roc-pc-rk3399_defconfig
> > > +++ b/configs/roc-pc-rk3399_defconfig
> > > @@ -56,3 +56,9 @@ CONFIG_USB_ETHER_RTL8152=y
> > >  CONFIG_USB_ETHER_SMSC95XX=y
> > >  CONFIG_SPL_TINY_MEMSET=y
> > >  CONFIG_ERRNO_STR=y
> > > +CONFIG_DM_VIDEO=y
> > > +CONFIG_VIDEO_BPP16=y
> > > +CONFIG_VIDEO_BPP32=y
> > > +CONFIG_DISPLAY=y
> > > +CONFIG_VIDEO_ROCKCHIP=y
> > > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > > diff --git a/include/configs/evb_rk3399.h b/include/configs/evb_rk3399.h
> > > index c0b0358893..09eb361655 100644
> > > --- a/include/configs/evb_rk3399.h
> > > +++ b/include/configs/evb_rk3399.h
> > > @@ -6,6 +6,11 @@
> > >  #ifndef __EVB_RK3399_H
> > >  #define __EVB_RK3399_H
> > >
> > > +#define ROCKCHIP_DEVICE_SETTINGS \
> > > +             "stdin=serial,cros-ec-keyb\0" \
> > > +             "stdout=serial,vidconsole\0" \
> > > +             "stderr=serial,vidconsole\0"
> > > +
> > >  #include <configs/rk3399_common.h>
> > >
> > >  #if defined(CONFIG_ENV_IS_IN_MMC)
> >
> > This seems like another commit (along with the question I saw about
> > i.MX FB not showing the right colors) 2cc393f32fd9 needs to be reworked
> > so that we default to enabling everything still but let boards opt out
> > rather than forcing everyone to opt-in as it seems like there's a lot of
> > cases where people need to opt-in and didn't know.
> 
> yes, this evb board config is common across most of the rk3399
> defconfig boards. this patch enable hdmi on few rk3399 boards all use
> same config file, evb_rk3399.h

Yes, the ROCKCHIP_DEVICE_SETTINGS part makes sense, but the rest looks
very much like part of we need to rework the commit I mentioned.  I
don't object to this going in as-is.  Anatolij, how goes the rework of
things however?  I do want to see that get in sooner rather than later
so we can sort out other regressions from just a lack of CONFIG options
being enabled.  Thanks!

-- 
Tom

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
@ 2020-02-03 14:47           ` Tom Rini
  0 siblings, 0 replies; 22+ messages in thread
From: Tom Rini @ 2020-02-03 14:47 UTC (permalink / raw)
  To: u-boot

On Mon, Feb 03, 2020 at 04:55:27PM +0530, Jagan Teki wrote:
> On Fri, Jan 24, 2020 at 8:57 PM Tom Rini <trini@konsulko.com> wrote:
> >
> > On Thu, Jan 23, 2020 at 09:58:45PM +0530, Jagan Teki wrote:
> >
> > > Enable config options and console setting to respective
> > > rk3399 board for HDMI output.
> > >
> > > Boards supported and tested on this patch are:
> > > - NanoPc T4
> > > - NanoPi M4
> > > - NanoPi Neo4
> > > - ROC-RK3399-PC
> > >
> > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> > > ---
> > >  configs/nanopc-t4-rk3399_defconfig   | 6 ++++++
> > >  configs/nanopi-m4-rk3399_defconfig   | 6 ++++++
> > >  configs/nanopi-neo4-rk3399_defconfig | 6 ++++++
> > >  configs/roc-pc-rk3399_defconfig      | 6 ++++++
> > >  include/configs/evb_rk3399.h         | 5 +++++
> > >  5 files changed, 29 insertions(+)
> > >
> > > diff --git a/configs/nanopc-t4-rk3399_defconfig b/configs/nanopc-t4-rk3399_defconfig
> > > index bd6d60ff6c..17e8a18d31 100644
> > > --- a/configs/nanopc-t4-rk3399_defconfig
> > > +++ b/configs/nanopc-t4-rk3399_defconfig
> > > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> > >  CONFIG_USB_ETHER_SMSC95XX=y
> > >  CONFIG_SPL_TINY_MEMSET=y
> > >  CONFIG_ERRNO_STR=y
> > > +CONFIG_DM_VIDEO=y
> > > +CONFIG_VIDEO_BPP16=y
> > > +CONFIG_VIDEO_BPP32=y
> > > +CONFIG_DISPLAY=y
> > > +CONFIG_VIDEO_ROCKCHIP=y
> > > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > > diff --git a/configs/nanopi-m4-rk3399_defconfig b/configs/nanopi-m4-rk3399_defconfig
> > > index 74ede13c23..b73b2fdc27 100644
> > > --- a/configs/nanopi-m4-rk3399_defconfig
> > > +++ b/configs/nanopi-m4-rk3399_defconfig
> > > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> > >  CONFIG_USB_ETHER_SMSC95XX=y
> > >  CONFIG_SPL_TINY_MEMSET=y
> > >  CONFIG_ERRNO_STR=y
> > > +CONFIG_DM_VIDEO=y
> > > +CONFIG_VIDEO_BPP16=y
> > > +CONFIG_VIDEO_BPP32=y
> > > +CONFIG_DISPLAY=y
> > > +CONFIG_VIDEO_ROCKCHIP=y
> > > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > > diff --git a/configs/nanopi-neo4-rk3399_defconfig b/configs/nanopi-neo4-rk3399_defconfig
> > > index a44124aac0..2ecb50967b 100644
> > > --- a/configs/nanopi-neo4-rk3399_defconfig
> > > +++ b/configs/nanopi-neo4-rk3399_defconfig
> > > @@ -53,3 +53,9 @@ CONFIG_USB_ETHER_RTL8152=y
> > >  CONFIG_USB_ETHER_SMSC95XX=y
> > >  CONFIG_SPL_TINY_MEMSET=y
> > >  CONFIG_ERRNO_STR=y
> > > +CONFIG_DM_VIDEO=y
> > > +CONFIG_VIDEO_BPP16=y
> > > +CONFIG_VIDEO_BPP32=y
> > > +CONFIG_DISPLAY=y
> > > +CONFIG_VIDEO_ROCKCHIP=y
> > > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > > diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
> > > index 3a051d9b0c..a9f99f992d 100644
> > > --- a/configs/roc-pc-rk3399_defconfig
> > > +++ b/configs/roc-pc-rk3399_defconfig
> > > @@ -56,3 +56,9 @@ CONFIG_USB_ETHER_RTL8152=y
> > >  CONFIG_USB_ETHER_SMSC95XX=y
> > >  CONFIG_SPL_TINY_MEMSET=y
> > >  CONFIG_ERRNO_STR=y
> > > +CONFIG_DM_VIDEO=y
> > > +CONFIG_VIDEO_BPP16=y
> > > +CONFIG_VIDEO_BPP32=y
> > > +CONFIG_DISPLAY=y
> > > +CONFIG_VIDEO_ROCKCHIP=y
> > > +CONFIG_DISPLAY_ROCKCHIP_HDMI=y
> > > diff --git a/include/configs/evb_rk3399.h b/include/configs/evb_rk3399.h
> > > index c0b0358893..09eb361655 100644
> > > --- a/include/configs/evb_rk3399.h
> > > +++ b/include/configs/evb_rk3399.h
> > > @@ -6,6 +6,11 @@
> > >  #ifndef __EVB_RK3399_H
> > >  #define __EVB_RK3399_H
> > >
> > > +#define ROCKCHIP_DEVICE_SETTINGS \
> > > +             "stdin=serial,cros-ec-keyb\0" \
> > > +             "stdout=serial,vidconsole\0" \
> > > +             "stderr=serial,vidconsole\0"
> > > +
> > >  #include <configs/rk3399_common.h>
> > >
> > >  #if defined(CONFIG_ENV_IS_IN_MMC)
> >
> > This seems like another commit (along with the question I saw about
> > i.MX FB not showing the right colors) 2cc393f32fd9 needs to be reworked
> > so that we default to enabling everything still but let boards opt out
> > rather than forcing everyone to opt-in as it seems like there's a lot of
> > cases where people need to opt-in and didn't know.
> 
> yes, this evb board config is common across most of the rk3399
> defconfig boards. this patch enable hdmi on few rk3399 boards all use
> same config file, evb_rk3399.h

Yes, the ROCKCHIP_DEVICE_SETTINGS part makes sense, but the rest looks
very much like part of we need to rework the commit I mentioned.  I
don't object to this going in as-is.  Anatolij, how goes the rework of
things however?  I do want to see that get in sooner rather than later
so we can sort out other regressions from just a lack of CONFIG options
being enabled.  Thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200203/1b7927f6/attachment.sig>

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
  2020-02-03 14:47           ` Tom Rini
@ 2020-02-03 22:10             ` Anatolij Gustschin
  -1 siblings, 0 replies; 22+ messages in thread
From: Anatolij Gustschin @ 2020-02-03 22:10 UTC (permalink / raw)
  To: Tom Rini; +Cc: open list:ARM/Rockchip SoC..., U-Boot-Denx, linux-amarula

On Mon, 3 Feb 2020 09:47:08 -0500
Tom Rini trini@konsulko.com wrote:
... 
> > yes, this evb board config is common across most of the rk3399
> > defconfig boards. this patch enable hdmi on few rk3399 boards all use
> > same config file, evb_rk3399.h  
> 
> Yes, the ROCKCHIP_DEVICE_SETTINGS part makes sense, but the rest looks
> very much like part of we need to rework the commit I mentioned.  I
> don't object to this going in as-is.  Anatolij, how goes the rework of
> things however?  I do want to see that get in sooner rather than later
> so we can sort out other regressions from just a lack of CONFIG options
> being enabled.  Thanks!

A patch [1] for this is under build testing.

[1] http://patchwork.ozlabs.org/patch/1233033

--
Anatolij

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
@ 2020-02-03 22:10             ` Anatolij Gustschin
  0 siblings, 0 replies; 22+ messages in thread
From: Anatolij Gustschin @ 2020-02-03 22:10 UTC (permalink / raw)
  To: u-boot

On Mon, 3 Feb 2020 09:47:08 -0500
Tom Rini trini at konsulko.com wrote:
... 
> > yes, this evb board config is common across most of the rk3399
> > defconfig boards. this patch enable hdmi on few rk3399 boards all use
> > same config file, evb_rk3399.h  
> 
> Yes, the ROCKCHIP_DEVICE_SETTINGS part makes sense, but the rest looks
> very much like part of we need to rework the commit I mentioned.  I
> don't object to this going in as-is.  Anatolij, how goes the rework of
> things however?  I do want to see that get in sooner rather than later
> so we can sort out other regressions from just a lack of CONFIG options
> being enabled.  Thanks!

A patch [1] for this is under build testing.

[1] http://patchwork.ozlabs.org/patch/1233033

--
Anatolij

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
  2020-01-23 16:28     ` Jagan Teki
@ 2020-03-02 13:01       ` Peter Robinson
  -1 siblings, 0 replies; 22+ messages in thread
From: Peter Robinson @ 2020-03-02 13:01 UTC (permalink / raw)
  To: Jagan Teki
  Cc: Kever Yang, Simon Glass, Philipp Tomsich, u-boot, linux-amarula,
	linux-rockchip

> +#define ROCKCHIP_DEVICE_SETTINGS \
> +               "stdin=serial,cros-ec-keyb\0" \

This should likely be a usb keyboard and not the CrOS EC keyboard.

> +               "stdout=serial,vidconsole\0" \
> +               "stderr=serial,vidconsole\0"
> +
>  #include <configs/rk3399_common.h>
>
>  #if defined(CONFIG_ENV_IS_IN_MMC)
> --
> 2.18.0.321.gffc6fa0e3
>

^ permalink raw reply	[flat|nested] 22+ messages in thread
* [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI
@ 2020-03-02 13:01       ` Peter Robinson
  0 siblings, 0 replies; 22+ messages in thread
From: Peter Robinson @ 2020-03-02 13:01 UTC (permalink / raw)
  To: u-boot

> +#define ROCKCHIP_DEVICE_SETTINGS \
> +               "stdin=serial,cros-ec-keyb\0" \

This should likely be a usb keyboard and not the CrOS EC keyboard.

> +               "stdout=serial,vidconsole\0" \
> +               "stderr=serial,vidconsole\0"
> +
>  #include <configs/rk3399_common.h>
>
>  #if defined(CONFIG_ENV_IS_IN_MMC)
> --
> 2.18.0.321.gffc6fa0e3
>

^ permalink raw reply	[flat|nested] 22+ messages in thread
end of thread, other threads:[~2020-03-02 13:01 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-23 16:28 [PATCH 0/4] rockchip: rk3399: Fix HDMI out Jagan Teki
2020-01-23 16:28 ` Jagan Teki
     [not found] ` <20200123162845.10651-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2020-01-23 16:28   ` [PATCH 1/4] arm64: dts: rk3399-u-boot: Delete vop assigned-clocks/rates Jagan Teki
2020-01-23 16:28     ` Jagan Teki
2020-01-23 16:28   ` [PATCH 2/4] video: rockchip: Fix vop modes for rk3399 Jagan Teki
2020-01-23 16:28     ` Jagan Teki
2020-01-23 16:28   ` [PATCH 3/4] rockchip: Enable pre console " Jagan Teki
2020-01-23 16:28     ` Jagan Teki
2020-01-23 16:28   ` [PATCH 4/4] rockchip: Enable HDMI output on rk3399 board w/ HDMI Jagan Teki
2020-01-23 16:28     ` Jagan Teki
2020-01-24 15:27     ` Tom Rini
2020-01-24 15:27       ` Tom Rini
2020-01-24 17:03       ` Anatolij Gustschin
2020-01-24 17:03         ` Anatolij Gustschin
2020-02-03 11:25       ` Jagan Teki
2020-02-03 11:25         ` Jagan Teki
2020-02-03 14:47         ` Tom Rini
2020-02-03 14:47           ` Tom Rini
2020-02-03 22:10           ` Anatolij Gustschin
2020-02-03 22:10             ` Anatolij Gustschin
2020-03-02 13:01     ` Peter Robinson
2020-03-02 13:01       ` Peter Robinson

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.