From: Marcin Smoczynski <marcinx.smoczynski@intel.com>
To: akhil.goyal@nxp.com, konstantin.ananyev@intel.com,
roy.fan.zhang@intel.com, declan.doherty@intel.com,
radu.nicolau@intel.com, pablo.de.lara.guarch@intel.com
Cc: dev@dpdk.org, Marcin Smoczynski <marcinx.smoczynski@intel.com>
Subject: [dpdk-dev] [PATCH v6 7/8] examples/ipsec-secgw: cpu crypto testing
Date: Tue, 4 Feb 2020 14:12:57 +0100 [thread overview]
Message-ID: <20200204131258.17632-8-marcinx.smoczynski@intel.com> (raw)
In-Reply-To: <20200204131258.17632-1-marcinx.smoczynski@intel.com>
Enable cpu-crypto mode testing by adding dedicated environmental
variable CRYPTO_PRIM_TYPE. Setting it to 'type cpu-crypto' allows
to run test scenario with cpu crypto acceleration.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
---
examples/ipsec-secgw/test/common_defs.sh | 21 +++++++++++++++++++
examples/ipsec-secgw/test/linux_test4.sh | 11 +---------
examples/ipsec-secgw/test/linux_test6.sh | 11 +---------
.../test/trs_3descbc_sha1_common_defs.sh | 8 +++----
.../test/trs_aescbc_sha1_common_defs.sh | 8 +++----
.../test/trs_aesctr_sha1_common_defs.sh | 8 +++----
.../test/tun_3descbc_sha1_common_defs.sh | 8 +++----
.../test/tun_aescbc_sha1_common_defs.sh | 8 +++----
.../test/tun_aesctr_sha1_common_defs.sh | 8 +++----
9 files changed, 47 insertions(+), 44 deletions(-)
diff --git a/examples/ipsec-secgw/test/common_defs.sh b/examples/ipsec-secgw/test/common_defs.sh
index 4aac4981a..6b6ae06f3 100644
--- a/examples/ipsec-secgw/test/common_defs.sh
+++ b/examples/ipsec-secgw/test/common_defs.sh
@@ -42,6 +42,27 @@ DPDK_BUILD=${RTE_TARGET:-x86_64-native-linux-gcc}
DEF_MTU_LEN=1400
DEF_PING_LEN=1200
+#upsate operation mode based on env vars values
+select_mode()
+{
+ # select sync/async mode
+ if [[ -n "${CRYPTO_PRIM_TYPE}" && -n "${SGW_CMD_XPRM}" ]]; then
+ echo "${CRYPTO_PRIM_TYPE} is enabled"
+ SGW_CFG_XPRM="${SGW_CFG_XPRM} ${CRYPTO_PRIM_TYPE}"
+ fi
+
+ #make linux to generate fragmented packets
+ if [[ -n "${MULTI_SEG_TEST}" && -n "${SGW_CMD_XPRM}" ]]; then
+ echo "multi-segment test is enabled"
+ SGW_CMD_XPRM="${SGW_CMD_XPRM} ${MULTI_SEG_TEST}"
+ PING_LEN=5000
+ MTU_LEN=1500
+ else
+ PING_LEN=${DEF_PING_LEN}
+ MTU_LEN=${DEF_MTU_LEN}
+ fi
+}
+
#setup mtu on local iface
set_local_mtu()
{
diff --git a/examples/ipsec-secgw/test/linux_test4.sh b/examples/ipsec-secgw/test/linux_test4.sh
index 760451000..fb8ae1023 100644
--- a/examples/ipsec-secgw/test/linux_test4.sh
+++ b/examples/ipsec-secgw/test/linux_test4.sh
@@ -45,16 +45,7 @@ MODE=$1
. ${DIR}/common_defs.sh
. ${DIR}/${MODE}_defs.sh
-#make linux to generate fragmented packets
-if [[ -n "${MULTI_SEG_TEST}" && -n "${SGW_CMD_XPRM}" ]]; then
- echo "multi-segment test is enabled"
- SGW_CMD_XPRM="${SGW_CMD_XPRM} ${MULTI_SEG_TEST}"
- PING_LEN=5000
- MTU_LEN=1500
-else
- PING_LEN=${DEF_PING_LEN}
- MTU_LEN=${DEF_MTU_LEN}
-fi
+select_mode
config_secgw
diff --git a/examples/ipsec-secgw/test/linux_test6.sh b/examples/ipsec-secgw/test/linux_test6.sh
index 479f29be3..dbcca7936 100644
--- a/examples/ipsec-secgw/test/linux_test6.sh
+++ b/examples/ipsec-secgw/test/linux_test6.sh
@@ -46,16 +46,7 @@ MODE=$1
. ${DIR}/common_defs.sh
. ${DIR}/${MODE}_defs.sh
-#make linux to generate fragmented packets
-if [[ -n "${MULTI_SEG_TEST}" && -n "${SGW_CMD_XPRM}" ]]; then
- echo "multi-segment test is enabled"
- SGW_CMD_XPRM="${SGW_CMD_XPRM} ${MULTI_SEG_TEST}"
- PING_LEN=5000
- MTU_LEN=1500
-else
- PING_LEN=${DEF_PING_LEN}
- MTU_LEN=${DEF_MTU_LEN}
-fi
+select_mode
config_secgw
diff --git a/examples/ipsec-secgw/test/trs_3descbc_sha1_common_defs.sh b/examples/ipsec-secgw/test/trs_3descbc_sha1_common_defs.sh
index 3c5c18afd..62118bb3f 100644
--- a/examples/ipsec-secgw/test/trs_3descbc_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/trs_3descbc_sha1_common_defs.sh
@@ -33,14 +33,14 @@ cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
sa in 9 cipher_algo 3des-cbc \
cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo 3des-cbc \
@@ -48,7 +48,7 @@ cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 9 cipher_algo 3des-cbc \
@@ -56,7 +56,7 @@ cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
diff --git a/examples/ipsec-secgw/test/trs_aescbc_sha1_common_defs.sh b/examples/ipsec-secgw/test/trs_aescbc_sha1_common_defs.sh
index 9dbdd1765..7ddeb2b5a 100644
--- a/examples/ipsec-secgw/test/trs_aescbc_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/trs_aescbc_sha1_common_defs.sh
@@ -32,27 +32,27 @@ sa in 7 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
sa in 9 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 9 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
diff --git a/examples/ipsec-secgw/test/trs_aesctr_sha1_common_defs.sh b/examples/ipsec-secgw/test/trs_aesctr_sha1_common_defs.sh
index 6aba680f9..f0178355a 100644
--- a/examples/ipsec-secgw/test/trs_aesctr_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/trs_aesctr_sha1_common_defs.sh
@@ -32,27 +32,27 @@ sa in 7 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
sa in 9 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#SA out rules
sa out 9 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode transport
+mode transport ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
diff --git a/examples/ipsec-secgw/test/tun_3descbc_sha1_common_defs.sh b/examples/ipsec-secgw/test/tun_3descbc_sha1_common_defs.sh
index 7c3226f84..d8869fad0 100644
--- a/examples/ipsec-secgw/test/tun_3descbc_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/tun_3descbc_sha1_common_defs.sh
@@ -33,14 +33,14 @@ cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4}
+mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4} ${SGW_CFG_XPRM}
sa in 9 cipher_algo 3des-cbc \
cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6}
+mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6} ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo 3des-cbc \
@@ -48,14 +48,14 @@ cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4}
+mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4} ${SGW_CFG_XPRM}
sa out 9 cipher_algo 3des-cbc \
cipher_key \
de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6}
+mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6} ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
diff --git a/examples/ipsec-secgw/test/tun_aescbc_sha1_common_defs.sh b/examples/ipsec-secgw/test/tun_aescbc_sha1_common_defs.sh
index bdf5938a0..2616926b2 100644
--- a/examples/ipsec-secgw/test/tun_aescbc_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/tun_aescbc_sha1_common_defs.sh
@@ -32,26 +32,26 @@ sa in 7 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4}
+mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4} ${SGW_CFG_XPRM}
sa in 9 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6}
+mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6} ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4}
+mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4} ${SGW_CFG_XPRM}
sa out 9 cipher_algo aes-128-cbc \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6}
+mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6} ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
diff --git a/examples/ipsec-secgw/test/tun_aesctr_sha1_common_defs.sh b/examples/ipsec-secgw/test/tun_aesctr_sha1_common_defs.sh
index 06f2ef0c6..06b561fd7 100644
--- a/examples/ipsec-secgw/test/tun_aesctr_sha1_common_defs.sh
+++ b/examples/ipsec-secgw/test/tun_aesctr_sha1_common_defs.sh
@@ -32,26 +32,26 @@ sa in 7 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4}
+mode ipv4-tunnel src ${REMOTE_IPV4} dst ${LOCAL_IPV4} ${SGW_CFG_XPRM}
sa in 9 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6}
+mode ipv6-tunnel src ${REMOTE_IPV6} dst ${LOCAL_IPV6} ${SGW_CFG_XPRM}
#SA out rules
sa out 7 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4}
+mode ipv4-tunnel src ${LOCAL_IPV4} dst ${REMOTE_IPV4} ${SGW_CFG_XPRM}
sa out 9 cipher_algo aes-128-ctr \
cipher_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
auth_algo sha1-hmac \
auth_key de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef:de:ad:be:ef \
-mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6}
+mode ipv6-tunnel src ${LOCAL_IPV6} dst ${REMOTE_IPV6} ${SGW_CFG_XPRM}
#Routing rules
rt ipv4 dst ${REMOTE_IPV4}/32 port 0
--
2.17.1
next prev parent reply other threads:[~2020-02-04 13:14 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-15 18:28 [dpdk-dev] [PATCH v3 0/6] Introduce CPU crypto mode Marcin Smoczynski
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 1/6] cryptodev: introduce cpu crypto support API Marcin Smoczynski
2020-01-15 23:20 ` Ananyev, Konstantin
2020-01-16 10:11 ` Zhang, Roy Fan
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 2/6] crypto/aesni_gcm: cpu crypto support Marcin Smoczynski
2020-01-15 23:16 ` Ananyev, Konstantin
2020-01-16 10:00 ` Zhang, Roy Fan
2020-01-21 13:53 ` De Lara Guarch, Pablo
2020-01-21 14:29 ` Ananyev, Konstantin
2020-01-21 14:51 ` De Lara Guarch, Pablo
2020-01-21 15:23 ` Ananyev, Konstantin
2020-01-21 22:33 ` De Lara Guarch, Pablo
2020-01-22 12:43 ` Ananyev, Konstantin
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 3/6] security: add cpu crypto action type Marcin Smoczynski
2020-01-15 22:49 ` Ananyev, Konstantin
2020-01-16 10:01 ` Zhang, Roy Fan
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 4/6] ipsec: introduce support for cpu crypto mode Marcin Smoczynski
2020-01-16 10:53 ` Zhang, Roy Fan
2020-01-16 10:53 ` Zhang, Roy Fan
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 5/6] examples/ipsec-secgw: cpu crypto support Marcin Smoczynski
2020-01-16 10:54 ` Zhang, Roy Fan
2020-01-15 18:28 ` [dpdk-dev] [PATCH v3 6/6] examples/ipsec-secgw: cpu crypto testing Marcin Smoczynski
2020-01-16 10:54 ` Zhang, Roy Fan
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 0/8] Introduce CPU crypto mode Marcin Smoczynski
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 1/8] cryptodev: introduce cpu crypto support API Marcin Smoczynski
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 2/8] crypto/aesni_gcm: cpu crypto support Marcin Smoczynski
2020-01-28 10:49 ` De Lara Guarch, Pablo
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 3/8] test/crypto: add CPU crypto tests Marcin Smoczynski
2020-01-28 9:31 ` De Lara Guarch, Pablo
2020-01-28 10:51 ` De Lara Guarch, Pablo
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 4/8] security: add cpu crypto action type Marcin Smoczynski
2020-01-28 11:00 ` Ananyev, Konstantin
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 5/8] ipsec: introduce support for cpu crypto mode Marcin Smoczynski
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 6/8] examples/ipsec-secgw: cpu crypto support Marcin Smoczynski
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 7/8] examples/ipsec-secgw: cpu crypto testing Marcin Smoczynski
2020-01-28 3:16 ` [dpdk-dev] [PATCH v4 8/8] doc: add cpu crypto related documentation Marcin Smoczynski
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 0/8] Introduce CPU crypto mode Marcin Smoczynski
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 1/8] cryptodev: introduce cpu crypto support API Marcin Smoczynski
2020-01-31 14:30 ` Akhil Goyal
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 2/8] crypto/aesni_gcm: cpu crypto support Marcin Smoczynski
2020-01-28 16:39 ` Ananyev, Konstantin
2020-01-31 14:33 ` Akhil Goyal
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 3/8] test/crypto: add CPU crypto tests Marcin Smoczynski
2020-01-31 14:37 ` Akhil Goyal
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 4/8] security: add cpu crypto action type Marcin Smoczynski
2020-01-31 14:26 ` Akhil Goyal
2020-02-04 10:36 ` Akhil Goyal
2020-02-04 10:43 ` Ananyev, Konstantin
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 5/8] ipsec: introduce support for cpu crypto mode Marcin Smoczynski
2020-01-28 16:37 ` Ananyev, Konstantin
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 6/8] examples/ipsec-secgw: cpu crypto support Marcin Smoczynski
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 7/8] examples/ipsec-secgw: cpu crypto testing Marcin Smoczynski
2020-01-28 14:22 ` [dpdk-dev] [PATCH v5 8/8] doc: add cpu crypto related documentation Marcin Smoczynski
2020-01-31 14:43 ` Akhil Goyal
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 0/8] Introduce CPU crypto mode Marcin Smoczynski
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 1/8] cryptodev: introduce cpu crypto support API Marcin Smoczynski
2020-02-05 14:57 ` Akhil Goyal
2020-02-06 0:48 ` Thomas Monjalon
2020-02-06 12:36 ` [dpdk-dev] [PATCH] cryptodev: fix missing doxygen comment Marcin Smoczynski
2020-02-06 12:43 ` Ananyev, Konstantin
2020-02-12 13:15 ` Akhil Goyal
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 2/8] crypto/aesni_gcm: cpu crypto support Marcin Smoczynski
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 3/8] security: add cpu crypto action type Marcin Smoczynski
2020-02-05 14:58 ` Akhil Goyal
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 4/8] test/crypto: add cpu crypto mode to tests Marcin Smoczynski
2020-02-05 14:59 ` Akhil Goyal
2020-02-07 14:28 ` [dpdk-dev] [PATCH] test/crypto: add cpu crypto mode tests Marcin Smoczynski
2020-02-07 17:04 ` Ananyev, Konstantin
2020-02-13 9:14 ` Akhil Goyal
2020-02-13 9:29 ` Akhil Goyal
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 5/8] ipsec: introduce support for cpu crypto mode Marcin Smoczynski
2020-02-05 14:59 ` Akhil Goyal
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 6/8] examples/ipsec-secgw: cpu crypto support Marcin Smoczynski
2020-02-05 15:00 ` Akhil Goyal
2020-02-04 13:12 ` Marcin Smoczynski [this message]
2020-02-04 13:12 ` [dpdk-dev] [PATCH v6 8/8] doc: add release notes for cpu crypto Marcin Smoczynski
2020-02-05 15:03 ` [dpdk-dev] [PATCH v6 0/8] Introduce CPU crypto mode Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200204131258.17632-8-marcinx.smoczynski@intel.com \
--to=marcinx.smoczynski@intel.com \
--cc=akhil.goyal@nxp.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=konstantin.ananyev@intel.com \
--cc=pablo.de.lara.guarch@intel.com \
--cc=radu.nicolau@intel.com \
--cc=roy.fan.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.