From: Martin Kepplinger <martin.kepplinger@puri.sm> To: robh@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com Cc: linux-imx@nxp.com, Anson.Huang@nxp.com, devicetree@vger.kernel.org, kernel@puri.sm, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, "Angus Ainslie (Purism)" <angus@akkea.ca> Subject: [PATCH v1 02/12] arm64: dts: librem5-devkit: add the simcom 7100 modem and audio Date: Wed, 5 Feb 2020 15:29:53 +0100 [thread overview] Message-ID: <20200205143003.28408-3-martin.kepplinger@puri.sm> (raw) In-Reply-To: <20200205143003.28408-1-martin.kepplinger@puri.sm> From: "Angus Ainslie (Purism)" <angus@akkea.ca> Add the simcomm modem and the sai6 interface that connects it, as well as the sgtl5000 audio codec. Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> --- .../dts/freescale/imx8mq-librem5-devkit.dts | 55 +++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 9702db69d3ed..8162576e8f3d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -148,6 +148,51 @@ regulator-always-on; }; + sim7100_codec: sound-wwan-codec { + compatible = "option,gtm601"; + #sound-dai-cells = <0>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + frame-master; + bitclock-master; + }; + }; + + sound-wwan { + compatible = "simple-audio-card"; + simple-audio-card,name = "SIMCom SIM7100"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,cpu { + sound-dai = <&sai6>; + }; + telephony_link_master: simple-audio-card,codec { + sound-dai = <&sim7100_codec>; + frame-master; + bitclock-master; + }; + }; + vibrator { compatible = "gpio-vibrator"; pinctrl-names = "default"; @@ -749,6 +794,16 @@ status = "okay"; }; +&sai6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai6>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI6>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-synchronous-rx; + status = "okay"; +}; + &uart1 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Martin Kepplinger <martin.kepplinger@puri.sm> To: robh@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com Cc: devicetree@vger.kernel.org, kernel@puri.sm, Anson.Huang@nxp.com, "Angus Ainslie \(Purism\)" <angus@akkea.ca>, linux-kernel@vger.kernel.org, linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v1 02/12] arm64: dts: librem5-devkit: add the simcom 7100 modem and audio Date: Wed, 5 Feb 2020 15:29:53 +0100 [thread overview] Message-ID: <20200205143003.28408-3-martin.kepplinger@puri.sm> (raw) In-Reply-To: <20200205143003.28408-1-martin.kepplinger@puri.sm> From: "Angus Ainslie (Purism)" <angus@akkea.ca> Add the simcomm modem and the sai6 interface that connects it, as well as the sgtl5000 audio codec. Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca> --- .../dts/freescale/imx8mq-librem5-devkit.dts | 55 +++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts index 9702db69d3ed..8162576e8f3d 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts @@ -148,6 +148,51 @@ regulator-always-on; }; + sim7100_codec: sound-wwan-codec { + compatible = "option,gtm601"; + #sound-dai-cells = <0>; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker Ext", + "Line", "Line In Jack"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Microphone Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT", + "Speaker Ext", "LINE_OUT"; + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; + frame-master; + bitclock-master; + }; + }; + + sound-wwan { + compatible = "simple-audio-card"; + simple-audio-card,name = "SIMCom SIM7100"; + simple-audio-card,format = "dsp_a"; + simple-audio-card,cpu { + sound-dai = <&sai6>; + }; + telephony_link_master: simple-audio-card,codec { + sound-dai = <&sim7100_codec>; + frame-master; + bitclock-master; + }; + }; + vibrator { compatible = "gpio-vibrator"; pinctrl-names = "default"; @@ -749,6 +794,16 @@ status = "okay"; }; +&sai6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai6>; + assigned-clocks = <&clk IMX8MQ_CLK_SAI6>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + fsl,sai-synchronous-rx; + status = "okay"; +}; + &uart1 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-02-05 14:31 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-05 14:29 [PATCH v1 00/12] arm64: dts: librem5-devkit: description updates Martin Kepplinger 2020-02-05 14:29 ` Martin Kepplinger 2020-02-05 14:29 ` [PATCH v1 01/12] arm64: dts: librem5-devkit: add sai2 and sai6 pinctrl definitions Martin Kepplinger 2020-02-05 14:29 ` Martin Kepplinger 2020-02-17 3:54 ` Shawn Guo 2020-02-17 3:54 ` Shawn Guo 2020-02-05 14:29 ` Martin Kepplinger [this message] 2020-02-05 14:29 ` [PATCH v1 02/12] arm64: dts: librem5-devkit: add the simcom 7100 modem and audio Martin Kepplinger 2020-02-17 3:59 ` Shawn Guo 2020-02-17 3:59 ` Shawn Guo 2020-02-05 14:29 ` [PATCH v1 03/12] arm64: dts: librem5-devkit: allow modem to wake the system from suspend Martin Kepplinger 2020-02-05 14:29 ` Martin Kepplinger 2020-02-17 4:02 ` Shawn Guo 2020-02-17 4:02 ` Shawn Guo 2020-02-05 14:29 ` [PATCH v1 04/12] arm64: dts: librem5-devkit: enable sai2 audio interface Martin Kepplinger 2020-02-05 14:29 ` Martin Kepplinger 2020-02-05 14:29 ` [PATCH v1 05/12] arm64: dts: librem5-devkit: add the sgtl5000 i2c audio codec Martin Kepplinger 2020-02-05 14:29 ` Martin Kepplinger 2020-02-17 4:05 ` Shawn Guo 2020-02-17 4:05 ` Shawn Guo 2020-02-05 14:29 ` [PATCH v1 06/12] arm64: dts: librem5-devkit: add a vbus supply to usb0 Martin Kepplinger 2020-02-05 14:29 ` Martin Kepplinger 2020-02-05 14:29 ` [PATCH v1 07/12] arm64: dts: librem5-devkit: add the regulators for DVFS Martin Kepplinger 2020-02-05 14:29 ` Martin Kepplinger 2020-02-17 4:08 ` Shawn Guo 2020-02-17 4:08 ` Shawn Guo 2020-02-05 14:29 ` [PATCH v1 08/12] arm64: dts: librem5-devkit: add a battery for the bq25896 to monitor Martin Kepplinger 2020-02-05 14:29 ` Martin Kepplinger 2020-02-05 14:30 ` [PATCH v1 09/12] arm64: dts: librem5-devkit: allow the redpine card to be removed Martin Kepplinger 2020-02-05 14:30 ` Martin Kepplinger 2020-02-05 14:30 ` [PATCH v1 10/12] arm64: dts: librem5-devkit: configure VSELECT Martin Kepplinger 2020-02-05 14:30 ` Martin Kepplinger 2020-02-17 4:09 ` Shawn Guo 2020-02-17 4:09 ` Shawn Guo 2020-02-05 14:30 ` [PATCH v1 11/12] arm64: dts: librem5-devkit: increase the VBUS current in the kernel Martin Kepplinger 2020-02-05 14:30 ` Martin Kepplinger 2020-02-05 14:30 ` [PATCH v1 12/12] arm64: dts: librem5-devkit: add lsm9ds1 mount matrix Martin Kepplinger 2020-02-05 14:30 ` Martin Kepplinger 2020-02-13 14:08 ` [PATCH v1 00/12] arm64: dts: librem5-devkit: description updates Martin Kepplinger 2020-02-13 14:08 ` Martin Kepplinger 2020-02-14 18:44 ` Guido Günther 2020-02-14 18:44 ` Guido Günther
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200205143003.28408-3-martin.kepplinger@puri.sm \ --to=martin.kepplinger@puri.sm \ --cc=Anson.Huang@nxp.com \ --cc=angus@akkea.ca \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=kernel@puri.sm \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.