From: Jason Yan <yanaijie@huawei.com> To: <mpe@ellerman.id.au>, <linuxppc-dev@lists.ozlabs.org>, <diana.craciun@nxp.com>, <christophe.leroy@c-s.fr>, <benh@kernel.crashing.org>, <paulus@samba.org>, <npiggin@gmail.com>, <keescook@chromium.org>, <kernel-hardening@lists.openwall.com>, <oss@buserror.net> Cc: <linux-kernel@vger.kernel.org>, <zhaohongjiang@huawei.com>, Jason Yan <yanaijie@huawei.com> Subject: [PATCH v3 0/6] implement KASLR for powerpc/fsl_booke/64 Date: Thu, 6 Feb 2020 10:58:19 +0800 [thread overview] Message-ID: <20200206025825.22934-1-yanaijie@huawei.com> (raw) This is a try to implement KASLR for Freescale BookE64 which is based on my earlier implementation for Freescale BookE32: https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=131718 The implementation for Freescale BookE64 is similar as BookE32. One difference is that Freescale BookE64 set up a TLB mapping of 1G during booting. Another difference is that ppc64 needs the kernel to be 64K-aligned. So we can randomize the kernel in this 1G mapping and make it 64K-aligned. This can save some code to creat another TLB map at early boot. The disadvantage is that we only have about 1G/64K = 16384 slots to put the kernel in. KERNELBASE 64K |--> kernel <--| | | | +--+--+--+ +--+--+--+--+--+--+--+--+--+ +--+--+ | | | |....| | | | | | | | | |....| | | +--+--+--+ +--+--+--+--+--+--+--+--+--+ +--+--+ | | 1G |-----> offset <-----| kernstart_virt_addr I'm not sure if the slot numbers is enough or the design has any defects. If you have some better ideas, I would be happy to hear that. Thank you all. v2->v3: Fix build error when KASLR is disabled. v1->v2: Add __kaslr_offset for the secondary cpu boot up. Jason Yan (6): powerpc/fsl_booke/kaslr: refactor kaslr_legal_offset() and kaslr_early_init() powerpc/fsl_booke/64: introduce reloc_kernel_entry() helper powerpc/fsl_booke/64: implement KASLR for fsl_booke64 powerpc/fsl_booke/64: do not clear the BSS for the second pass powerpc/fsl_booke/64: clear the original kernel if randomized powerpc/fsl_booke/kaslr: rename kaslr-booke32.rst to kaslr-booke.rst and add 64bit part .../{kaslr-booke32.rst => kaslr-booke.rst} | 35 +++++++-- arch/powerpc/Kconfig | 2 +- arch/powerpc/kernel/exceptions-64e.S | 23 ++++++ arch/powerpc/kernel/head_64.S | 14 ++++ arch/powerpc/kernel/setup_64.c | 4 +- arch/powerpc/mm/mmu_decl.h | 19 ++--- arch/powerpc/mm/nohash/kaslr_booke.c | 71 +++++++++++++------ 7 files changed, 132 insertions(+), 36 deletions(-) rename Documentation/powerpc/{kaslr-booke32.rst => kaslr-booke.rst} (59%) -- 2.17.2
WARNING: multiple messages have this Message-ID (diff)
From: Jason Yan <yanaijie@huawei.com> To: <mpe@ellerman.id.au>, <linuxppc-dev@lists.ozlabs.org>, <diana.craciun@nxp.com>, <christophe.leroy@c-s.fr>, <benh@kernel.crashing.org>, <paulus@samba.org>, <npiggin@gmail.com>, <keescook@chromium.org>, <kernel-hardening@lists.openwall.com>, <oss@buserror.net> Cc: Jason Yan <yanaijie@huawei.com>, linux-kernel@vger.kernel.org, zhaohongjiang@huawei.com Subject: [PATCH v3 0/6] implement KASLR for powerpc/fsl_booke/64 Date: Thu, 6 Feb 2020 10:58:19 +0800 [thread overview] Message-ID: <20200206025825.22934-1-yanaijie@huawei.com> (raw) This is a try to implement KASLR for Freescale BookE64 which is based on my earlier implementation for Freescale BookE32: https://patchwork.ozlabs.org/project/linuxppc-dev/list/?series=131718 The implementation for Freescale BookE64 is similar as BookE32. One difference is that Freescale BookE64 set up a TLB mapping of 1G during booting. Another difference is that ppc64 needs the kernel to be 64K-aligned. So we can randomize the kernel in this 1G mapping and make it 64K-aligned. This can save some code to creat another TLB map at early boot. The disadvantage is that we only have about 1G/64K = 16384 slots to put the kernel in. KERNELBASE 64K |--> kernel <--| | | | +--+--+--+ +--+--+--+--+--+--+--+--+--+ +--+--+ | | | |....| | | | | | | | | |....| | | +--+--+--+ +--+--+--+--+--+--+--+--+--+ +--+--+ | | 1G |-----> offset <-----| kernstart_virt_addr I'm not sure if the slot numbers is enough or the design has any defects. If you have some better ideas, I would be happy to hear that. Thank you all. v2->v3: Fix build error when KASLR is disabled. v1->v2: Add __kaslr_offset for the secondary cpu boot up. Jason Yan (6): powerpc/fsl_booke/kaslr: refactor kaslr_legal_offset() and kaslr_early_init() powerpc/fsl_booke/64: introduce reloc_kernel_entry() helper powerpc/fsl_booke/64: implement KASLR for fsl_booke64 powerpc/fsl_booke/64: do not clear the BSS for the second pass powerpc/fsl_booke/64: clear the original kernel if randomized powerpc/fsl_booke/kaslr: rename kaslr-booke32.rst to kaslr-booke.rst and add 64bit part .../{kaslr-booke32.rst => kaslr-booke.rst} | 35 +++++++-- arch/powerpc/Kconfig | 2 +- arch/powerpc/kernel/exceptions-64e.S | 23 ++++++ arch/powerpc/kernel/head_64.S | 14 ++++ arch/powerpc/kernel/setup_64.c | 4 +- arch/powerpc/mm/mmu_decl.h | 19 ++--- arch/powerpc/mm/nohash/kaslr_booke.c | 71 +++++++++++++------ 7 files changed, 132 insertions(+), 36 deletions(-) rename Documentation/powerpc/{kaslr-booke32.rst => kaslr-booke.rst} (59%) -- 2.17.2
next reply other threads:[~2020-02-06 2:59 UTC|newest] Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-02-06 2:58 Jason Yan [this message] 2020-02-06 2:58 ` [PATCH v3 0/6] implement KASLR for powerpc/fsl_booke/64 Jason Yan 2020-02-06 2:58 ` [PATCH v3 1/6] powerpc/fsl_booke/kaslr: refactor kaslr_legal_offset() and kaslr_early_init() Jason Yan 2020-02-06 2:58 ` Jason Yan 2020-02-20 13:40 ` Christophe Leroy 2020-02-26 2:11 ` Jason Yan 2020-02-26 2:11 ` Jason Yan 2020-02-06 2:58 ` [PATCH v3 2/6] powerpc/fsl_booke/64: introduce reloc_kernel_entry() helper Jason Yan 2020-02-06 2:58 ` Jason Yan 2020-02-20 13:41 ` Christophe Leroy 2020-02-06 2:58 ` [PATCH v3 3/6] powerpc/fsl_booke/64: implement KASLR for fsl_booke64 Jason Yan 2020-02-06 2:58 ` Jason Yan 2020-02-20 13:48 ` Christophe Leroy 2020-02-26 2:40 ` Jason Yan 2020-02-26 2:40 ` Jason Yan 2020-02-26 3:33 ` Jason Yan 2020-02-26 3:33 ` Jason Yan 2020-02-26 5:04 ` [RFC PATCH] Use IS_ENABLED() instead of #ifdefs Christophe Leroy 2020-02-26 5:04 ` Christophe Leroy 2020-02-26 6:26 ` Jason Yan 2020-02-26 6:26 ` Jason Yan 2020-02-26 5:10 ` [PATCH v3 3/6] powerpc/fsl_booke/64: implement KASLR for fsl_booke64 Christophe Leroy 2020-02-26 5:08 ` Christophe Leroy 2020-03-04 21:44 ` Scott Wood 2020-03-04 21:44 ` Scott Wood 2020-03-05 2:32 ` Jason Yan 2020-03-05 2:32 ` Jason Yan 2020-02-06 2:58 ` [PATCH v3 4/6] powerpc/fsl_booke/64: do not clear the BSS for the second pass Jason Yan 2020-02-06 2:58 ` Jason Yan 2020-03-04 21:49 ` Scott Wood 2020-03-04 21:49 ` Scott Wood 2020-03-05 3:14 ` Jason Yan 2020-03-05 3:14 ` Jason Yan 2020-02-06 2:58 ` [PATCH v3 5/6] powerpc/fsl_booke/64: clear the original kernel if randomized Jason Yan 2020-02-06 2:58 ` Jason Yan 2020-02-20 13:49 ` Christophe Leroy 2020-02-26 2:44 ` Jason Yan 2020-02-26 2:44 ` Jason Yan 2020-03-04 21:53 ` Scott Wood 2020-03-04 21:53 ` Scott Wood 2020-03-05 3:20 ` Jason Yan 2020-03-05 3:20 ` Jason Yan 2020-02-06 2:58 ` [PATCH v3 6/6] powerpc/fsl_booke/kaslr: rename kaslr-booke32.rst to kaslr-booke.rst and add 64bit part Jason Yan 2020-02-06 2:58 ` Jason Yan 2020-02-20 13:50 ` Christophe Leroy 2020-02-26 2:46 ` Jason Yan 2020-02-26 2:46 ` Jason Yan 2020-02-13 3:00 ` [PATCH v3 0/6] implement KASLR for powerpc/fsl_booke/64 Jason Yan 2020-02-13 3:00 ` Jason Yan 2020-02-20 3:33 ` Jason Yan 2020-02-20 3:33 ` Jason Yan 2020-02-26 7:16 ` Daniel Axtens 2020-02-26 7:16 ` Daniel Axtens 2020-02-26 8:18 ` Jason Yan 2020-02-26 8:18 ` Jason Yan 2020-02-26 11:41 ` Daniel Axtens 2020-02-27 1:55 ` Jason Yan 2020-02-27 1:55 ` Jason Yan 2020-02-28 5:53 ` Scott Wood 2020-02-28 5:53 ` Scott Wood 2020-02-28 6:47 ` Jason Yan 2020-02-28 6:47 ` Jason Yan 2020-02-29 4:28 ` Scott Wood 2020-02-29 4:28 ` Scott Wood 2020-02-29 7:27 ` Jason Yan 2020-02-29 7:27 ` Jason Yan 2020-02-29 22:54 ` Scott Wood 2020-02-29 22:54 ` Scott Wood 2020-03-02 2:17 ` Jason Yan 2020-03-02 2:17 ` Jason Yan 2020-03-02 3:24 ` Scott Wood 2020-03-02 3:24 ` Scott Wood 2020-03-02 7:12 ` Jason Yan 2020-03-02 7:12 ` Jason Yan 2020-03-02 8:47 ` Scott Wood 2020-03-02 8:47 ` Scott Wood 2020-03-02 9:37 ` Jason Yan 2020-03-02 9:37 ` Jason Yan 2020-03-04 21:21 ` Scott Wood 2020-03-04 21:21 ` Scott Wood 2020-03-05 3:22 ` Jason Yan 2020-03-05 3:22 ` Jason Yan 2020-03-04 12:47 [PATCH] vfsprintf: only hash addresses in security environment Jason Yan 2020-03-04 18:34 ` Kees Cook 2020-03-04 21:11 ` [PATCH v3 0/6] implement KASLR for powerpc/fsl_booke/64 Scott Wood 2020-03-04 22:36 ` Kees Cook 2020-03-05 18:51 ` Linus Torvalds 2020-03-06 18:33 ` Scott Wood
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200206025825.22934-1-yanaijie@huawei.com \ --to=yanaijie@huawei.com \ --cc=benh@kernel.crashing.org \ --cc=christophe.leroy@c-s.fr \ --cc=diana.craciun@nxp.com \ --cc=keescook@chromium.org \ --cc=kernel-hardening@lists.openwall.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=mpe@ellerman.id.au \ --cc=npiggin@gmail.com \ --cc=oss@buserror.net \ --cc=paulus@samba.org \ --cc=zhaohongjiang@huawei.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.