All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
	gregkh@linuxfoundation.org, jackp@codeaurora.org,
	balbi@kernel.org, bjorn.andersson@linaro.org, robh@kernel.org
Cc: linux-kernel@vger.kernel.org, Yu Chen <chenyu56@huawei.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	ShuFan Lee <shufan_lee@richtek.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Hans de Goede <hdegoede@redhat.com>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Jun Li <lijun.kernel@gmail.com>,
	Valentin Schneider <valentin.schneider@arm.com>,
	devicetree@vger.kernel.org, John Stultz <john.stultz@linaro.org>,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Subject: [PATCH v5 06/18] usb: dwc3: Registering a role switch in the DRD code.
Date: Fri,  7 Feb 2020 20:16:42 +0000	[thread overview]
Message-ID: <20200207201654.641525-7-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20200207201654.641525-1-bryan.odonoghue@linaro.org>

From: Yu Chen <chenyu56@huawei.com>

The Type-C drivers use USB role switch API to inform the
system about the negotiated data role, so registering a role
switch in the DRD code in order to support platforms with
USB Type-C connectors.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yu Chen <chenyu56@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/usb/dwc3/core.h |  3 ++
 drivers/usb/dwc3/drd.c  | 75 ++++++++++++++++++++++++++++++++++++++++-
 2 files changed, 77 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 77c4a9abe365..a99e57636172 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -25,6 +25,7 @@
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/role.h>
 #include <linux/ulpi/interface.h>
 
 #include <linux/phy/phy.h>
@@ -953,6 +954,7 @@ struct dwc3_scratchpad_array {
  * @hsphy_mode: UTMI phy mode, one of following:
  *		- USBPHY_INTERFACE_MODE_UTMI
  *		- USBPHY_INTERFACE_MODE_UTMIW
+ * @role_sw: usb_role_switch handle
  * @usb2_phy: pointer to USB2 PHY
  * @usb3_phy: pointer to USB3 PHY
  * @usb2_generic_phy: pointer to USB2 PHY
@@ -1086,6 +1088,7 @@ struct dwc3 {
 	struct extcon_dev	*edev;
 	struct notifier_block	edev_nb;
 	enum usb_phy_interface	hsphy_mode;
+	struct usb_role_switch	*role_sw;
 
 	u32			fladj;
 	u32			irq_gadget;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index c946d64142ad..c355166793d0 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -476,6 +476,71 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	return edev;
 }
 
+#if IS_ENABLED(CONFIG_USB_ROLE_SWITCH)
+static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	u32 mode;
+
+	switch (role) {
+	case USB_ROLE_HOST:
+		mode = DWC3_GCTL_PRTCAP_HOST;
+		break;
+	case USB_ROLE_DEVICE:
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	default:
+		mode = DWC3_GCTL_PRTCAP_DEVICE;
+		break;
+	}
+
+	dwc3_set_mode(dwc, mode);
+	return 0;
+}
+
+static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
+{
+	struct dwc3 *dwc = dev_get_drvdata(dev);
+	unsigned long flags;
+	enum usb_role role;
+
+	spin_lock_irqsave(&dwc->lock, flags);
+	switch (dwc->current_dr_role) {
+	case DWC3_GCTL_PRTCAP_HOST:
+		role = USB_ROLE_HOST;
+		break;
+	case DWC3_GCTL_PRTCAP_DEVICE:
+		role = USB_ROLE_DEVICE;
+		break;
+	case DWC3_GCTL_PRTCAP_OTG:
+		role = dwc->current_otg_role;
+		break;
+	default:
+		role = USB_ROLE_DEVICE;
+		break;
+	}
+	spin_unlock_irqrestore(&dwc->lock, flags);
+	return role;
+}
+
+static int dwc3_setup_role_switch(struct dwc3 *dwc)
+{
+	struct usb_role_switch_desc dwc3_role_switch = {NULL};
+
+	dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
+	dwc3_role_switch.set = dwc3_usb_role_switch_set;
+	dwc3_role_switch.get = dwc3_usb_role_switch_get;
+	dwc->role_sw = usb_role_switch_register(dwc->dev, &dwc3_role_switch);
+	if (IS_ERR(dwc->role_sw))
+		return PTR_ERR(dwc->role_sw);
+
+	dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+	return 0;
+}
+#else
+#define dwc3_setup_role_switch(x) 0
+#endif
+
 int dwc3_drd_init(struct dwc3 *dwc)
 {
 	int ret, irq;
@@ -484,7 +549,12 @@ int dwc3_drd_init(struct dwc3 *dwc)
 	if (IS_ERR(dwc->edev))
 		return PTR_ERR(dwc->edev);
 
-	if (dwc->edev) {
+	if (IS_ENABLED(CONFIG_USB_ROLE_SWITCH) &&
+	    device_property_read_bool(dwc->dev, "usb-role-switch")) {
+		ret = dwc3_setup_role_switch(dwc);
+		if (ret < 0)
+			return ret;
+	} else if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
 					       &dwc->edev_nb);
@@ -531,6 +601,9 @@ void dwc3_drd_exit(struct dwc3 *dwc)
 {
 	unsigned long flags;
 
+	if (dwc->role_sw)
+		usb_role_switch_unregister(dwc->role_sw);
+
 	if (dwc->edev)
 		extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
 					   &dwc->edev_nb);
-- 
2.25.0


  parent reply	other threads:[~2020-02-07 20:18 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-07 20:16 [PATCH v5 00/18] Enable Qualcomm QCS 404 HS/SS USB Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 01/18] dt-bindings: phy: remove qcom-dwc3-usb-phy Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 02/18] dt-bindings: phy: Add Qualcomm Synopsys Hi-Speed USB PHY binding Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 03/18] phy: qualcomm: Add Synopsys 28nm Hi-Speed USB PHY driver Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 04/18] dt-bindings: Add Qualcomm USB SuperSpeed PHY bindings Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 05/18] phy: qualcomm: usb: Add SuperSpeed PHY driver Bryan O'Donoghue
2020-02-07 20:16 ` Bryan O'Donoghue [this message]
2020-02-07 20:16 ` [PATCH v5 07/18] dt-bindings: usb: dwc3: Add a gpio-usb-connector example Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 08/18] dt-bindings: usb: dwc3: Add a usb-role-switch to the example Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 09/18] usb: dwc3: qcom: Add support for usb-conn-gpio connectors Bryan O'Donoghue
2020-02-07 20:43   ` Jack Pham
2020-02-07 21:24     ` Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 10/18] usb: dwc3: " Bryan O'Donoghue
2020-02-07 23:49   ` Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 11/18] usb: dwc3: Add support for a role-switch notifier Bryan O'Donoghue
2020-02-08  0:15   ` Jack Pham
2020-02-08  0:28     ` Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 12/18] usb: dwc3: qcom: Enable gpio-usb-conn based role-switching Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 13/18] arm64: dts: qcom: qcs404: Add USB devices and PHYs Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 14/18] arm64: dts: qcom: qcs404-evb: Define VBUS pins Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 15/18] arm64: dts: qcom: qcs404-evb: Define USB ID pin Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 16/18] arm64: dts: qcom: qcs404-evb: Describe external VBUS regulator Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 17/18] arm64: dts: qcom: qcs404-evb: Raise vreg_l12_3p3 minimum voltage Bryan O'Donoghue
2020-02-07 20:16 ` [PATCH v5 18/18] arm64: dts: qcom: qcs404-evb: Enable USB controllers Bryan O'Donoghue

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200207201654.641525-7-bryan.odonoghue@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=balbi@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=chenyu56@huawei.com \
    --cc=chunfeng.yun@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=jackp@codeaurora.org \
    --cc=john.stultz@linaro.org \
    --cc=lijun.kernel@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=shufan_lee@richtek.com \
    --cc=suzuki.poulose@arm.com \
    --cc=valentin.schneider@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.