[PATCH 0/5] x86/vmware: Steal time accounting support

[PATCH 0/5] x86/vmware: Steal time accounting support

[Alexey Makhalov via Virtualization]

Hello,

This patchset introduces steal time accounting support for
the VMware guest. The idea and implementation of guest
steal time support is similar to KVM ones and it is based
on steal clock. The steal clock is a per CPU structure in
a shared memory between hypervisor and guest, initialized
by each CPU through hypercall. Steal clock is got updated
by the hypervisor and read by the guest. 

The patchset consists of 5 items:

1. x86/vmware: Make vmware_select_hypercall() __init
Minor clean up.

2. x86/vmware: Remove vmware_sched_clock_setup()
Preparation for the main patch.

3. x86/vmware: Steal time clock for VMware guest
Core steal time support functionality.

4. x86/vmware: Enable steal time accounting
Support for steal time accounting used by update_rq_clock().

5. x86/vmware: Use bool type for vmw_sched_clock
Minor clean up.

Alexey Makhalov (5):
  x86/vmware: Make vmware_select_hypercall() __init
  x86/vmware: Remove vmware_sched_clock_setup()
  x86/vmware: Steal time clock for VMware guest
  x86/vmware: Enable steal time accounting
  x86/vmware: Use bool type for vmw_sched_clock

 Documentation/admin-guide/kernel-parameters.txt |   2 +-
 arch/x86/kernel/cpu/vmware.c                    | 227 +++++++++++++++++++++++-
 2 files changed, 220 insertions(+), 9 deletions(-)

-- 
2.14.2

[PATCH 1/5] x86/vmware: Make vmware_select_hypercall() __init

[Alexey Makhalov via Virtualization]

vmware_select_hypercall() is used only by the __init
functions, and should be annotated with __init as well.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
---
 arch/x86/kernel/cpu/vmware.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 46d732696c1c..d280560fd75e 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -213,7 +213,7 @@ static void __init vmware_platform_setup(void)
 	vmware_set_capabilities();
 }
 
-static u8 vmware_select_hypercall(void)
+static u8 __init vmware_select_hypercall(void)
 {
 	int eax, ebx, ecx, edx;
 
-- 
2.14.2

[PATCH 2/5] x86/vmware: Remove vmware_sched_clock_setup()

[Alexey Makhalov via Virtualization]

Move cyc2ns setup logic to separate function.
This separation will allow to use cyc2ns mult/shift pair
not only for the sched_clock but also for other clocks
such as steal_clock.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
---
 arch/x86/kernel/cpu/vmware.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index d280560fd75e..efb22fa76ba4 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -122,7 +122,7 @@ static unsigned long long notrace vmware_sched_clock(void)
 	return ns;
 }
 
-static void __init vmware_sched_clock_setup(void)
+static void __init vmware_cyc2ns_setup(void)
 {
 	struct cyc2ns_data *d = &vmware_cyc2ns;
 	unsigned long long tsc_now = rdtsc();
@@ -132,8 +132,7 @@ static void __init vmware_sched_clock_setup(void)
 	d->cyc2ns_offset = mul_u64_u32_shr(tsc_now, d->cyc2ns_mul,
 					   d->cyc2ns_shift);
 
-	pv_ops.time.sched_clock = vmware_sched_clock;
-	pr_info("using sched offset of %llu ns\n", d->cyc2ns_offset);
+	pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
 }
 
 static void __init vmware_paravirt_ops_setup(void)
@@ -141,8 +140,14 @@ static void __init vmware_paravirt_ops_setup(void)
 	pv_info.name = "VMware hypervisor";
 	pv_ops.cpu.io_delay = paravirt_nop;
 
-	if (vmware_tsc_khz && vmw_sched_clock)
-		vmware_sched_clock_setup();
+	if (vmware_tsc_khz == 0)
+		return;
+
+	vmware_cyc2ns_setup();
+
+	if (vmw_sched_clock)
+		pv_ops.time.sched_clock = vmware_sched_clock;
+
 }
 #else
 #define vmware_paravirt_ops_setup() do {} while (0)
-- 
2.14.2

[PATCH 3/5] x86/vmware: Steal time clock for VMware guest

[Alexey Makhalov via Virtualization]

Steal time is the amount of CPU time needed by a guest
virtual machine that is not provided by the host. Steal
time occurs when the host allocates this CPU time
elsewhere: for example, to another guest.

Steal time can be enabled by adding VM configuration option
stealclock.enable = "TRUE". It is supported by VMs that run
hardware version 13 or newer.

This change introduces the VMware steal time infrastructure.
The high level code (such as enabling, disabling and
hot-plug routines) was derived from KVM one.

[Tomer: use READ_ONCE macros and 32bit guests support]

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Co-developed-by: Tomer Zeltzer <tomerr90@gmail.com>
Signed-off-by: Tomer Zeltzer <tomerr90@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
---
 arch/x86/kernel/cpu/vmware.c | 197 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 197 insertions(+)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index efb22fa76ba4..59459992ad47 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -25,6 +25,8 @@
 #include <linux/init.h>
 #include <linux/export.h>
 #include <linux/clocksource.h>
+#include <linux/cpu.h>
+#include <linux/reboot.h>
 #include <asm/div64.h>
 #include <asm/x86_init.h>
 #include <asm/hypervisor.h>
@@ -47,6 +49,11 @@
 #define VMWARE_CMD_GETVCPU_INFO  68
 #define VMWARE_CMD_LEGACY_X2APIC  3
 #define VMWARE_CMD_VCPU_RESERVED 31
+#define VMWARE_CMD_STEALCLOCK    91
+
+#define STEALCLOCK_NOT_AVAILABLE (-1)
+#define STEALCLOCK_DISABLED        0
+#define STEALCLOCK_ENABLED         1
 
 #define VMWARE_PORT(cmd, eax, ebx, ecx, edx)				\
 	__asm__("inl (%%dx), %%eax" :					\
@@ -86,6 +93,18 @@
 	}							\
 	} while (0)
 
+struct vmware_steal_time {
+	union {
+		uint64_t clock;	/* stolen time counter in units of vtsc */
+		struct {
+			/* only for little-endian */
+			uint32_t clock_low;
+			uint32_t clock_high;
+		};
+	};
+	uint64_t reserved[7];
+};
+
 static unsigned long vmware_tsc_khz __ro_after_init;
 static u8 vmware_hypercall_mode     __ro_after_init;
 
@@ -104,6 +123,8 @@ static unsigned long vmware_get_tsc_khz(void)
 #ifdef CONFIG_PARAVIRT
 static struct cyc2ns_data vmware_cyc2ns __ro_after_init;
 static int vmw_sched_clock __initdata = 1;
+static DEFINE_PER_CPU_DECRYPTED(struct vmware_steal_time, steal_time) __aligned(64);
+static bool has_steal_clock;
 
 static __init int setup_vmw_sched_clock(char *s)
 {
@@ -135,6 +156,163 @@ static void __init vmware_cyc2ns_setup(void)
 	pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
 }
 
+static int vmware_cmd_stealclock(uint32_t arg1, uint32_t arg2)
+{
+	uint32_t result, info;
+
+	asm volatile (VMWARE_HYPERCALL :
+		"=a"(result),
+		"=c"(info) :
+		"a"(VMWARE_HYPERVISOR_MAGIC),
+		"b"(0),
+		"c"(VMWARE_CMD_STEALCLOCK),
+		"d"(0),
+		"S"(arg1),
+		"D"(arg2) :
+		"memory");
+	return result;
+}
+
+static bool stealclock_enable(phys_addr_t pa)
+{
+	return vmware_cmd_stealclock(upper_32_bits(pa),
+				     lower_32_bits(pa)) == STEALCLOCK_ENABLED;
+}
+
+static int __stealclock_disable(void)
+{
+	return vmware_cmd_stealclock(0, 1);
+}
+
+static void stealclock_disable(void)
+{
+	__stealclock_disable();
+}
+
+static bool vmware_is_stealclock_available(void)
+{
+	return __stealclock_disable() != STEALCLOCK_NOT_AVAILABLE;
+}
+
+/**
+ * vmware_steal_clock() - read the per-cpu steal clock
+ * @cpu:            the cpu number whose steal clock we want to read
+ *
+ * The function reads the steal clock if we are on a 64-bit system, otherwise
+ * reads it in parts, checking that the high part didn't change in the
+ * meantime.
+ *
+ * Return:
+ *      The steal clock reading in ns.
+ */
+static uint64_t vmware_steal_clock(int cpu)
+{
+	struct vmware_steal_time *steal = &per_cpu(steal_time, cpu);
+	uint64_t clock;
+
+	if (IS_ENABLED(CONFIG_64BIT))
+		clock = READ_ONCE(steal->clock);
+	else {
+		uint32_t initial_high, low, high;
+
+		do {
+			initial_high = READ_ONCE(steal->clock_high);
+			/* Do not reorder initial_high and high readings */
+			virt_rmb();
+			low = READ_ONCE(steal->clock_low);
+			/* Keep low reading in between */
+			virt_rmb();
+			high = READ_ONCE(steal->clock_high);
+		} while (initial_high != high);
+
+		clock = ((uint64_t)high << 32) | low;
+	}
+
+	return mul_u64_u32_shr(clock, vmware_cyc2ns.cyc2ns_mul,
+			     vmware_cyc2ns.cyc2ns_shift);
+}
+
+static void vmware_register_steal_time(void)
+{
+	int cpu = smp_processor_id();
+	struct vmware_steal_time *st = &per_cpu(steal_time, cpu);
+
+	if (!has_steal_clock)
+		return;
+
+	if (!stealclock_enable(slow_virt_to_phys(st))) {
+		has_steal_clock = false;
+		return;
+	}
+
+	pr_info("vmware-stealtime: cpu %d, pa %llx\n",
+		cpu, (unsigned long long) slow_virt_to_phys(st));
+}
+
+static void vmware_disable_steal_time(void)
+{
+	if (!has_steal_clock)
+		return;
+
+	stealclock_disable();
+}
+
+static void vmware_guest_cpu_init(void)
+{
+	if (has_steal_clock)
+		vmware_register_steal_time();
+}
+
+static void vmware_pv_guest_cpu_reboot(void *unused)
+{
+	vmware_disable_steal_time();
+}
+
+static int vmware_pv_reboot_notify(struct notifier_block *nb,
+				unsigned long code, void *unused)
+{
+	if (code == SYS_RESTART)
+		on_each_cpu(vmware_pv_guest_cpu_reboot, NULL, 1);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block vmware_pv_reboot_nb = {
+	.notifier_call = vmware_pv_reboot_notify,
+};
+
+#ifdef CONFIG_SMP
+static void __init vmware_smp_prepare_boot_cpu(void)
+{
+	vmware_guest_cpu_init();
+	native_smp_prepare_boot_cpu();
+}
+
+static int vmware_cpu_online(unsigned int cpu)
+{
+	local_irq_disable();
+	vmware_guest_cpu_init();
+	local_irq_enable();
+	return 0;
+}
+
+static int vmware_cpu_down_prepare(unsigned int cpu)
+{
+	local_irq_disable();
+	vmware_disable_steal_time();
+	local_irq_enable();
+	return 0;
+}
+#endif
+
+static __init int activate_jump_labels(void)
+{
+	if (has_steal_clock)
+		static_key_slow_inc(&paravirt_steal_enabled);
+
+	return 0;
+}
+arch_initcall(activate_jump_labels);
+
 static void __init vmware_paravirt_ops_setup(void)
 {
 	pv_info.name = "VMware hypervisor";
@@ -148,6 +326,25 @@ static void __init vmware_paravirt_ops_setup(void)
 	if (vmw_sched_clock)
 		pv_ops.time.sched_clock = vmware_sched_clock;
 
+	if (vmware_is_stealclock_available()) {
+		has_steal_clock = true;
+		pv_ops.time.steal_clock = vmware_steal_clock;
+
+		/* We use reboot notifier only to disable steal clock */
+		register_reboot_notifier(&vmware_pv_reboot_nb);
+
+#ifdef CONFIG_SMP
+		smp_ops.smp_prepare_boot_cpu =
+			vmware_smp_prepare_boot_cpu;
+		if (cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
+					      "x86/vmware:online",
+					      vmware_cpu_online,
+					      vmware_cpu_down_prepare) < 0)
+			pr_err("vmware_guest: Failed to install cpu hotplug callbacks\n");
+#else
+		vmware_guest_cpu_init();
+#endif
+	}
 }
 #else
 #define vmware_paravirt_ops_setup() do {} while (0)
-- 
2.14.2

[PATCH 4/5] x86/vmware: Enable steal time accounting

[Alexey Makhalov via Virtualization]

Set paravirt_steal_rq_enabled if steal clock present.
paravirt_steal_rq_enabled is used in sched/core.c to
adjust task progress by offsetting stolen time.
Use 'no-steal-acc' off switch (share same name with KVM)
to disable steal time accounting.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
---
 Documentation/admin-guide/kernel-parameters.txt |  2 +-
 arch/x86/kernel/cpu/vmware.c                    | 13 ++++++++++++-
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 87176a90e61a..07fbdccdd77c 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3152,7 +3152,7 @@
 			[X86,PV_OPS] Disable paravirtualized VMware scheduler
 			clock and use the default one.
 
-	no-steal-acc	[X86,KVM,ARM64] Disable paravirtualized steal time
+	no-steal-acc	[X86,PV_OPS,ARM64] Disable paravirtualized steal time
 			accounting. steal time is computed, but won't
 			influence scheduler behaviour
 
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 59459992ad47..0c65d661d88b 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -125,6 +125,7 @@ static struct cyc2ns_data vmware_cyc2ns __ro_after_init;
 static int vmw_sched_clock __initdata = 1;
 static DEFINE_PER_CPU_DECRYPTED(struct vmware_steal_time, steal_time) __aligned(64);
 static bool has_steal_clock;
+static bool steal_acc __initdata = true; /* steal time accounting */
 
 static __init int setup_vmw_sched_clock(char *s)
 {
@@ -133,6 +134,13 @@ static __init int setup_vmw_sched_clock(char *s)
 }
 early_param("no-vmw-sched-clock", setup_vmw_sched_clock);
 
+static __init int parse_no_stealacc(char *arg)
+{
+	steal_acc = false;
+	return 0;
+}
+early_param("no-steal-acc", parse_no_stealacc);
+
 static unsigned long long notrace vmware_sched_clock(void)
 {
 	unsigned long long ns;
@@ -306,8 +314,11 @@ static int vmware_cpu_down_prepare(unsigned int cpu)
 
 static __init int activate_jump_labels(void)
 {
-	if (has_steal_clock)
+	if (has_steal_clock) {
 		static_key_slow_inc(&paravirt_steal_enabled);
+		if (steal_acc)
+			static_key_slow_inc(&paravirt_steal_rq_enabled);
+	}
 
 	return 0;
 }
-- 
2.14.2

[PATCH 5/5] x86/vmware: Use bool type for vmw_sched_clock

[Alexey Makhalov via Virtualization]

To be aligned with other bool variables.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
---
 arch/x86/kernel/cpu/vmware.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 0c65d661d88b..54e57931051d 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -122,14 +122,14 @@ static unsigned long vmware_get_tsc_khz(void)
 
 #ifdef CONFIG_PARAVIRT
 static struct cyc2ns_data vmware_cyc2ns __ro_after_init;
-static int vmw_sched_clock __initdata = 1;
+static bool vmw_sched_clock __initdata = true;
 static DEFINE_PER_CPU_DECRYPTED(struct vmware_steal_time, steal_time) __aligned(64);
 static bool has_steal_clock;
 static bool steal_acc __initdata = true; /* steal time accounting */
 
 static __init int setup_vmw_sched_clock(char *s)
 {
-	vmw_sched_clock = 0;
+	vmw_sched_clock = false;
 	return 0;
 }
 early_param("no-vmw-sched-clock", setup_vmw_sched_clock);
-- 
2.14.2

Re: [PATCH 0/5] x86/vmware: Steal time accounting support

[Thomas Gleixner]

Alexey Makhalov <amakhalov@vmware.com> writes:
>
> Alexey Makhalov (5):
>   x86/vmware: Make vmware_select_hypercall() __init
>   x86/vmware: Remove vmware_sched_clock_setup()
>   x86/vmware: Steal time clock for VMware guest
>   x86/vmware: Enable steal time accounting
>   x86/vmware: Use bool type for vmw_sched_clock

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>

Re: [PATCH 0/5] x86/vmware: Steal time accounting support

[Borislav Petkov]

On Wed, Feb 12, 2020 at 08:03:07PM +0000, Alexey Makhalov wrote:
> Hello,
> 
> This patchset introduces steal time accounting support for
> the VMware guest. The idea and implementation of guest
> steal time support is similar to KVM ones and it is based
> on steal clock. The steal clock is a per CPU structure in
> a shared memory between hypervisor and guest, initialized
> by each CPU through hypercall. Steal clock is got updated
> by the hypervisor and read by the guest. 
> 
> The patchset consists of 5 items:
> 
> 1. x86/vmware: Make vmware_select_hypercall() __init
> Minor clean up.
> 
> 2. x86/vmware: Remove vmware_sched_clock_setup()
> Preparation for the main patch.
> 
> 3. x86/vmware: Steal time clock for VMware guest
> Core steal time support functionality.
> 
> 4. x86/vmware: Enable steal time accounting
> Support for steal time accounting used by update_rq_clock().
> 
> 5. x86/vmware: Use bool type for vmw_sched_clock
> Minor clean up.
> 
> Alexey Makhalov (5):
>   x86/vmware: Make vmware_select_hypercall() __init
>   x86/vmware: Remove vmware_sched_clock_setup()
>   x86/vmware: Steal time clock for VMware guest
>   x86/vmware: Enable steal time accounting
>   x86/vmware: Use bool type for vmw_sched_clock
> 
>  Documentation/admin-guide/kernel-parameters.txt |   2 +-
>  arch/x86/kernel/cpu/vmware.c                    | 227 +++++++++++++++++++++++-
>  2 files changed, 220 insertions(+), 9 deletions(-)

$ make ARCH=i386 allyesconfig
$ make ARCH=i386

  ...

  AR      drivers/net/built-in.a
  AR      drivers/built-in.a
  GEN     .version
  CHK     include/generated/compile.h
  LD      vmlinux.o
ld: arch/x86/kernel/kvm.o:(.discard+0x2): multiple definition of `__pcpu_unique_steal_time'; arch/x86/kernel/cpu/vmware.o:(.discard+0x0): first defined here
make: *** [Makefile:1078: vmlinux] Error 1

-- 
Regards/Gruss,
    Boris.

https://people.kernel.org/tglx/notes-about-netiquette

[PATCH v2 0/5] x86/vmware: Steal time accounting support

[Alexey Makhalov via Virtualization]

Hi,

This is a second version of the series. Changes are mentioned bellow.
Big thanks for the reviewers.

v2 changes:
  - renamed steal_time to vmw_steal_time (3rd patch) to avoid
    conflict with KVM one to fix compilation issue found by
    Borislav Petkov and kbuild test robot <lkp@intel.com>
  - added: "Reviewed-by: Thomas Gleixner <tglx@linutronix.de>"

Best regards,
Alexey

Alexey Makhalov (5):
  x86/vmware: Make vmware_select_hypercall() __init
  x86/vmware: Remove vmware_sched_clock_setup()
  x86/vmware: Steal time clock for VMware guest
  x86/vmware: Enable steal time accounting
  x86/vmware: Use bool type for vmw_sched_clock

 Documentation/admin-guide/kernel-parameters.txt |   2 +-
 arch/x86/kernel/cpu/vmware.c                    | 229 +++++++++++++++++++++++-
 2 files changed, 222 insertions(+), 9 deletions(-)

-- 
2.14.2

[PATCH v2 1/5] x86/vmware: Make vmware_select_hypercall() __init

[Alexey Makhalov via Virtualization]

vmware_select_hypercall() is used only by the __init
functions, and should be annotated with __init as well.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/cpu/vmware.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 46d732696c1c..d280560fd75e 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -213,7 +213,7 @@ static void __init vmware_platform_setup(void)
 	vmware_set_capabilities();
 }
 
-static u8 vmware_select_hypercall(void)
+static u8 __init vmware_select_hypercall(void)
 {
 	int eax, ebx, ecx, edx;
 
-- 
2.14.2

[PATCH v2 2/5] x86/vmware: Remove vmware_sched_clock_setup()

[Alexey Makhalov via Virtualization]

Move cyc2ns setup logic to separate function.
This separation will allow to use cyc2ns mult/shift pair
not only for the sched_clock but also for other clocks
such as steal_clock.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/cpu/vmware.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index d280560fd75e..efb22fa76ba4 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -122,7 +122,7 @@ static unsigned long long notrace vmware_sched_clock(void)
 	return ns;
 }
 
-static void __init vmware_sched_clock_setup(void)
+static void __init vmware_cyc2ns_setup(void)
 {
 	struct cyc2ns_data *d = &vmware_cyc2ns;
 	unsigned long long tsc_now = rdtsc();
@@ -132,8 +132,7 @@ static void __init vmware_sched_clock_setup(void)
 	d->cyc2ns_offset = mul_u64_u32_shr(tsc_now, d->cyc2ns_mul,
 					   d->cyc2ns_shift);
 
-	pv_ops.time.sched_clock = vmware_sched_clock;
-	pr_info("using sched offset of %llu ns\n", d->cyc2ns_offset);
+	pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
 }
 
 static void __init vmware_paravirt_ops_setup(void)
@@ -141,8 +140,14 @@ static void __init vmware_paravirt_ops_setup(void)
 	pv_info.name = "VMware hypervisor";
 	pv_ops.cpu.io_delay = paravirt_nop;
 
-	if (vmware_tsc_khz && vmw_sched_clock)
-		vmware_sched_clock_setup();
+	if (vmware_tsc_khz == 0)
+		return;
+
+	vmware_cyc2ns_setup();
+
+	if (vmw_sched_clock)
+		pv_ops.time.sched_clock = vmware_sched_clock;
+
 }
 #else
 #define vmware_paravirt_ops_setup() do {} while (0)
-- 
2.14.2

[PATCH v2 3/5] x86/vmware: Steal time clock for VMware guest

[Alexey Makhalov via Virtualization]

Steal time is the amount of CPU time needed by a guest
virtual machine that is not provided by the host. Steal
time occurs when the host allocates this CPU time
elsewhere: for example, to another guest.

Steal time can be enabled by adding VM configuration option
stealclock.enable = "TRUE". It is supported by VMs that run
hardware version 13 or newer.

This change introduces the VMware steal time infrastructure.
The high level code (such as enabling, disabling and
hot-plug routines) was derived from KVM one.

[Tomer: use READ_ONCE macros and 32bit guests support]

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Co-developed-by: Tomer Zeltzer <tomerr90@gmail.com>
Signed-off-by: Tomer Zeltzer <tomerr90@gmail.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/cpu/vmware.c | 197 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 197 insertions(+)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index efb22fa76ba4..cc604614f0ae 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -25,6 +25,8 @@
 #include <linux/init.h>
 #include <linux/export.h>
 #include <linux/clocksource.h>
+#include <linux/cpu.h>
+#include <linux/reboot.h>
 #include <asm/div64.h>
 #include <asm/x86_init.h>
 #include <asm/hypervisor.h>
@@ -47,6 +49,11 @@
 #define VMWARE_CMD_GETVCPU_INFO  68
 #define VMWARE_CMD_LEGACY_X2APIC  3
 #define VMWARE_CMD_VCPU_RESERVED 31
+#define VMWARE_CMD_STEALCLOCK    91
+
+#define STEALCLOCK_NOT_AVAILABLE (-1)
+#define STEALCLOCK_DISABLED        0
+#define STEALCLOCK_ENABLED         1
 
 #define VMWARE_PORT(cmd, eax, ebx, ecx, edx)				\
 	__asm__("inl (%%dx), %%eax" :					\
@@ -86,6 +93,18 @@
 	}							\
 	} while (0)
 
+struct vmware_steal_time {
+	union {
+		uint64_t clock;	/* stolen time counter in units of vtsc */
+		struct {
+			/* only for little-endian */
+			uint32_t clock_low;
+			uint32_t clock_high;
+		};
+	};
+	uint64_t reserved[7];
+};
+
 static unsigned long vmware_tsc_khz __ro_after_init;
 static u8 vmware_hypercall_mode     __ro_after_init;
 
@@ -104,6 +123,8 @@ static unsigned long vmware_get_tsc_khz(void)
 #ifdef CONFIG_PARAVIRT
 static struct cyc2ns_data vmware_cyc2ns __ro_after_init;
 static int vmw_sched_clock __initdata = 1;
+static DEFINE_PER_CPU_DECRYPTED(struct vmware_steal_time, vmw_steal_time) __aligned(64);
+static bool has_steal_clock;
 
 static __init int setup_vmw_sched_clock(char *s)
 {
@@ -135,6 +156,163 @@ static void __init vmware_cyc2ns_setup(void)
 	pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
 }
 
+static int vmware_cmd_stealclock(uint32_t arg1, uint32_t arg2)
+{
+	uint32_t result, info;
+
+	asm volatile (VMWARE_HYPERCALL :
+		"=a"(result),
+		"=c"(info) :
+		"a"(VMWARE_HYPERVISOR_MAGIC),
+		"b"(0),
+		"c"(VMWARE_CMD_STEALCLOCK),
+		"d"(0),
+		"S"(arg1),
+		"D"(arg2) :
+		"memory");
+	return result;
+}
+
+static bool stealclock_enable(phys_addr_t pa)
+{
+	return vmware_cmd_stealclock(upper_32_bits(pa),
+				     lower_32_bits(pa)) == STEALCLOCK_ENABLED;
+}
+
+static int __stealclock_disable(void)
+{
+	return vmware_cmd_stealclock(0, 1);
+}
+
+static void stealclock_disable(void)
+{
+	__stealclock_disable();
+}
+
+static bool vmware_is_stealclock_available(void)
+{
+	return __stealclock_disable() != STEALCLOCK_NOT_AVAILABLE;
+}
+
+/**
+ * vmware_steal_clock() - read the per-cpu steal clock
+ * @cpu:            the cpu number whose steal clock we want to read
+ *
+ * The function reads the steal clock if we are on a 64-bit system, otherwise
+ * reads it in parts, checking that the high part didn't change in the
+ * meantime.
+ *
+ * Return:
+ *      The steal clock reading in ns.
+ */
+static uint64_t vmware_steal_clock(int cpu)
+{
+	struct vmware_steal_time *steal = &per_cpu(vmw_steal_time, cpu);
+	uint64_t clock;
+
+	if (IS_ENABLED(CONFIG_64BIT))
+		clock = READ_ONCE(steal->clock);
+	else {
+		uint32_t initial_high, low, high;
+
+		do {
+			initial_high = READ_ONCE(steal->clock_high);
+			/* Do not reorder initial_high and high readings */
+			virt_rmb();
+			low = READ_ONCE(steal->clock_low);
+			/* Keep low reading in between */
+			virt_rmb();
+			high = READ_ONCE(steal->clock_high);
+		} while (initial_high != high);
+
+		clock = ((uint64_t)high << 32) | low;
+	}
+
+	return mul_u64_u32_shr(clock, vmware_cyc2ns.cyc2ns_mul,
+			     vmware_cyc2ns.cyc2ns_shift);
+}
+
+static void vmware_register_steal_time(void)
+{
+	int cpu = smp_processor_id();
+	struct vmware_steal_time *st = &per_cpu(vmw_steal_time, cpu);
+
+	if (!has_steal_clock)
+		return;
+
+	if (!stealclock_enable(slow_virt_to_phys(st))) {
+		has_steal_clock = false;
+		return;
+	}
+
+	pr_info("vmware-stealtime: cpu %d, pa %llx\n",
+		cpu, (unsigned long long) slow_virt_to_phys(st));
+}
+
+static void vmware_disable_steal_time(void)
+{
+	if (!has_steal_clock)
+		return;
+
+	stealclock_disable();
+}
+
+static void vmware_guest_cpu_init(void)
+{
+	if (has_steal_clock)
+		vmware_register_steal_time();
+}
+
+static void vmware_pv_guest_cpu_reboot(void *unused)
+{
+	vmware_disable_steal_time();
+}
+
+static int vmware_pv_reboot_notify(struct notifier_block *nb,
+				unsigned long code, void *unused)
+{
+	if (code == SYS_RESTART)
+		on_each_cpu(vmware_pv_guest_cpu_reboot, NULL, 1);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block vmware_pv_reboot_nb = {
+	.notifier_call = vmware_pv_reboot_notify,
+};
+
+#ifdef CONFIG_SMP
+static void __init vmware_smp_prepare_boot_cpu(void)
+{
+	vmware_guest_cpu_init();
+	native_smp_prepare_boot_cpu();
+}
+
+static int vmware_cpu_online(unsigned int cpu)
+{
+	local_irq_disable();
+	vmware_guest_cpu_init();
+	local_irq_enable();
+	return 0;
+}
+
+static int vmware_cpu_down_prepare(unsigned int cpu)
+{
+	local_irq_disable();
+	vmware_disable_steal_time();
+	local_irq_enable();
+	return 0;
+}
+#endif
+
+static __init int activate_jump_labels(void)
+{
+	if (has_steal_clock)
+		static_key_slow_inc(&paravirt_steal_enabled);
+
+	return 0;
+}
+arch_initcall(activate_jump_labels);
+
 static void __init vmware_paravirt_ops_setup(void)
 {
 	pv_info.name = "VMware hypervisor";
@@ -148,6 +326,25 @@ static void __init vmware_paravirt_ops_setup(void)
 	if (vmw_sched_clock)
 		pv_ops.time.sched_clock = vmware_sched_clock;
 
+	if (vmware_is_stealclock_available()) {
+		has_steal_clock = true;
+		pv_ops.time.steal_clock = vmware_steal_clock;
+
+		/* We use reboot notifier only to disable steal clock */
+		register_reboot_notifier(&vmware_pv_reboot_nb);
+
+#ifdef CONFIG_SMP
+		smp_ops.smp_prepare_boot_cpu =
+			vmware_smp_prepare_boot_cpu;
+		if (cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
+					      "x86/vmware:online",
+					      vmware_cpu_online,
+					      vmware_cpu_down_prepare) < 0)
+			pr_err("vmware_guest: Failed to install cpu hotplug callbacks\n");
+#else
+		vmware_guest_cpu_init();
+#endif
+	}
 }
 #else
 #define vmware_paravirt_ops_setup() do {} while (0)
-- 
2.14.2

[PATCH v2 4/5] x86/vmware: Enable steal time accounting

[Alexey Makhalov via Virtualization]

Set paravirt_steal_rq_enabled if steal clock present.
paravirt_steal_rq_enabled is used in sched/core.c to
adjust task progress by offsetting stolen time.
Use 'no-steal-acc' off switch (share same name with KVM)
to disable steal time accounting.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
 Documentation/admin-guide/kernel-parameters.txt |  2 +-
 arch/x86/kernel/cpu/vmware.c                    | 13 ++++++++++++-
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a1b7d3ad2a35..6b1a60fa4ad8 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3174,7 +3174,7 @@
 			[X86,PV_OPS] Disable paravirtualized VMware scheduler
 			clock and use the default one.
 
-	no-steal-acc	[X86,KVM,ARM64] Disable paravirtualized steal time
+	no-steal-acc	[X86,PV_OPS,ARM64] Disable paravirtualized steal time
 			accounting. steal time is computed, but won't
 			influence scheduler behaviour
 
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index cc604614f0ae..e885f73bebd4 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -125,6 +125,7 @@ static struct cyc2ns_data vmware_cyc2ns __ro_after_init;
 static int vmw_sched_clock __initdata = 1;
 static DEFINE_PER_CPU_DECRYPTED(struct vmware_steal_time, vmw_steal_time) __aligned(64);
 static bool has_steal_clock;
+static bool steal_acc __initdata = true; /* steal time accounting */
 
 static __init int setup_vmw_sched_clock(char *s)
 {
@@ -133,6 +134,13 @@ static __init int setup_vmw_sched_clock(char *s)
 }
 early_param("no-vmw-sched-clock", setup_vmw_sched_clock);
 
+static __init int parse_no_stealacc(char *arg)
+{
+	steal_acc = false;
+	return 0;
+}
+early_param("no-steal-acc", parse_no_stealacc);
+
 static unsigned long long notrace vmware_sched_clock(void)
 {
 	unsigned long long ns;
@@ -306,8 +314,11 @@ static int vmware_cpu_down_prepare(unsigned int cpu)
 
 static __init int activate_jump_labels(void)
 {
-	if (has_steal_clock)
+	if (has_steal_clock) {
 		static_key_slow_inc(&paravirt_steal_enabled);
+		if (steal_acc)
+			static_key_slow_inc(&paravirt_steal_rq_enabled);
+	}
 
 	return 0;
 }
-- 
2.14.2

[PATCH v2 5/5] x86/vmware: Use bool type for vmw_sched_clock

[Alexey Makhalov via Virtualization]

To be aligned with other bool variables.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/cpu/vmware.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index e885f73bebd4..9b6fafa69be9 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -122,14 +122,14 @@ static unsigned long vmware_get_tsc_khz(void)
 
 #ifdef CONFIG_PARAVIRT
 static struct cyc2ns_data vmware_cyc2ns __ro_after_init;
-static int vmw_sched_clock __initdata = 1;
+static bool vmw_sched_clock __initdata = true;
 static DEFINE_PER_CPU_DECRYPTED(struct vmware_steal_time, vmw_steal_time) __aligned(64);
 static bool has_steal_clock;
 static bool steal_acc __initdata = true; /* steal time accounting */
 
 static __init int setup_vmw_sched_clock(char *s)
 {
-	vmw_sched_clock = 0;
+	vmw_sched_clock = false;
 	return 0;
 }
 early_param("no-vmw-sched-clock", setup_vmw_sched_clock);
-- 
2.14.2

[tip: x86/vmware] x86/vmware: Use bool type for vmw_sched_clock

[tip-bot2 for Alexey Makhalov]

The following commit has been merged into the x86/vmware branch of tip:

Commit-ID:     8fefe9dacdb0a1347d3dac871bb1bba3cbc32945
Gitweb:        https://git.kernel.org/tip/8fefe9dacdb0a1347d3dac871bb1bba3cbc32945
Author:        Alexey Makhalov <amakhalov@vmware.com>
AuthorDate:    Mon, 23 Mar 2020 19:57:07 
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Tue, 24 Mar 2020 10:29:22 +01:00

x86/vmware: Use bool type for vmw_sched_clock

To be aligned with other bool variables.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323195707.31242-6-amakhalov@vmware.com
---
 arch/x86/kernel/cpu/vmware.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index e885f73..9b6fafa 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -122,14 +122,14 @@ static unsigned long vmware_get_tsc_khz(void)
 
 #ifdef CONFIG_PARAVIRT
 static struct cyc2ns_data vmware_cyc2ns __ro_after_init;
-static int vmw_sched_clock __initdata = 1;
+static bool vmw_sched_clock __initdata = true;
 static DEFINE_PER_CPU_DECRYPTED(struct vmware_steal_time, vmw_steal_time) __aligned(64);
 static bool has_steal_clock;
 static bool steal_acc __initdata = true; /* steal time accounting */
 
 static __init int setup_vmw_sched_clock(char *s)
 {
-	vmw_sched_clock = 0;
+	vmw_sched_clock = false;
 	return 0;
 }
 early_param("no-vmw-sched-clock", setup_vmw_sched_clock);

[tip: x86/vmware] x86/vmware: Enable steal time accounting

[tip-bot2 for Alexey Makhalov]

The following commit has been merged into the x86/vmware branch of tip:

Commit-ID:     e73a8f38f82dd1c41b70a06556bea7dc250cc384
Gitweb:        https://git.kernel.org/tip/e73a8f38f82dd1c41b70a06556bea7dc250cc384
Author:        Alexey Makhalov <amakhalov@vmware.com>
AuthorDate:    Mon, 23 Mar 2020 19:57:06 
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Tue, 24 Mar 2020 10:06:27 +01:00

x86/vmware: Enable steal time accounting

Set paravirt_steal_rq_enabled if steal clock present.
paravirt_steal_rq_enabled is used in sched/core.c to adjust task
progress by offsetting stolen time. Use 'no-steal-acc' off switch (share
same name with KVM) to disable steal time accounting.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323195707.31242-5-amakhalov@vmware.com
---
 Documentation/admin-guide/kernel-parameters.txt |  2 +-
 arch/x86/kernel/cpu/vmware.c                    | 13 ++++++++++++-
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index c07815d..863b37d 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3174,7 +3174,7 @@
 			[X86,PV_OPS] Disable paravirtualized VMware scheduler
 			clock and use the default one.
 
-	no-steal-acc	[X86,KVM,ARM64] Disable paravirtualized steal time
+	no-steal-acc	[X86,PV_OPS,ARM64] Disable paravirtualized steal time
 			accounting. steal time is computed, but won't
 			influence scheduler behaviour
 
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index cc60461..e885f73 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -125,6 +125,7 @@ static struct cyc2ns_data vmware_cyc2ns __ro_after_init;
 static int vmw_sched_clock __initdata = 1;
 static DEFINE_PER_CPU_DECRYPTED(struct vmware_steal_time, vmw_steal_time) __aligned(64);
 static bool has_steal_clock;
+static bool steal_acc __initdata = true; /* steal time accounting */
 
 static __init int setup_vmw_sched_clock(char *s)
 {
@@ -133,6 +134,13 @@ static __init int setup_vmw_sched_clock(char *s)
 }
 early_param("no-vmw-sched-clock", setup_vmw_sched_clock);
 
+static __init int parse_no_stealacc(char *arg)
+{
+	steal_acc = false;
+	return 0;
+}
+early_param("no-steal-acc", parse_no_stealacc);
+
 static unsigned long long notrace vmware_sched_clock(void)
 {
 	unsigned long long ns;
@@ -306,8 +314,11 @@ static int vmware_cpu_down_prepare(unsigned int cpu)
 
 static __init int activate_jump_labels(void)
 {
-	if (has_steal_clock)
+	if (has_steal_clock) {
 		static_key_slow_inc(&paravirt_steal_enabled);
+		if (steal_acc)
+			static_key_slow_inc(&paravirt_steal_rq_enabled);
+	}
 
 	return 0;
 }

[tip: x86/vmware] x86/vmware: Make vmware_select_hypercall() __init

[tip-bot2 for Alexey Makhalov]

The following commit has been merged into the x86/vmware branch of tip:

Commit-ID:     14388ae24544c4cc09056773c886839a2c8d256b
Gitweb:        https://git.kernel.org/tip/14388ae24544c4cc09056773c886839a2c8d256b
Author:        Alexey Makhalov <amakhalov@vmware.com>
AuthorDate:    Mon, 23 Mar 2020 19:57:03 
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Tue, 24 Mar 2020 09:26:04 +01:00

x86/vmware: Make vmware_select_hypercall() __init

vmware_select_hypercall() is used only by the __init
functions, and should be annotated with __init as well.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323195707.31242-2-amakhalov@vmware.com
---
 arch/x86/kernel/cpu/vmware.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 46d7326..d280560 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -213,7 +213,7 @@ static void __init vmware_platform_setup(void)
 	vmware_set_capabilities();
 }
 
-static u8 vmware_select_hypercall(void)
+static u8 __init vmware_select_hypercall(void)
 {
 	int eax, ebx, ecx, edx;
 

[tip: x86/vmware] x86/vmware: Remove vmware_sched_clock_setup()

[tip-bot2 for Alexey Makhalov]

The following commit has been merged into the x86/vmware branch of tip:

Commit-ID:     dd735f4707e603ac5b541b5f30de87c3c7bd60dd
Gitweb:        https://git.kernel.org/tip/dd735f4707e603ac5b541b5f30de87c3c7bd60dd
Author:        Alexey Makhalov <amakhalov@vmware.com>
AuthorDate:    Mon, 23 Mar 2020 19:57:04 
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Tue, 24 Mar 2020 09:31:06 +01:00

x86/vmware: Remove vmware_sched_clock_setup()

Move cyc2ns setup logic to separate function.
This separation will allow to use cyc2ns mult/shift pair
not only for the sched_clock but also for other clocks
such as steal_clock.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323195707.31242-3-amakhalov@vmware.com
---
 arch/x86/kernel/cpu/vmware.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index d280560..efb22fa 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -122,7 +122,7 @@ static unsigned long long notrace vmware_sched_clock(void)
 	return ns;
 }
 
-static void __init vmware_sched_clock_setup(void)
+static void __init vmware_cyc2ns_setup(void)
 {
 	struct cyc2ns_data *d = &vmware_cyc2ns;
 	unsigned long long tsc_now = rdtsc();
@@ -132,8 +132,7 @@ static void __init vmware_sched_clock_setup(void)
 	d->cyc2ns_offset = mul_u64_u32_shr(tsc_now, d->cyc2ns_mul,
 					   d->cyc2ns_shift);
 
-	pv_ops.time.sched_clock = vmware_sched_clock;
-	pr_info("using sched offset of %llu ns\n", d->cyc2ns_offset);
+	pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
 }
 
 static void __init vmware_paravirt_ops_setup(void)
@@ -141,8 +140,14 @@ static void __init vmware_paravirt_ops_setup(void)
 	pv_info.name = "VMware hypervisor";
 	pv_ops.cpu.io_delay = paravirt_nop;
 
-	if (vmware_tsc_khz && vmw_sched_clock)
-		vmware_sched_clock_setup();
+	if (vmware_tsc_khz == 0)
+		return;
+
+	vmware_cyc2ns_setup();
+
+	if (vmw_sched_clock)
+		pv_ops.time.sched_clock = vmware_sched_clock;
+
 }
 #else
 #define vmware_paravirt_ops_setup() do {} while (0)

[tip: x86/vmware] x86/vmware: Add steal time clock support for VMware guests

[tip-bot2 for Alexey Makhalov]

The following commit has been merged into the x86/vmware branch of tip:

Commit-ID:     ab02bb3f55f58e7608a88188000c3353398ebe3b
Gitweb:        https://git.kernel.org/tip/ab02bb3f55f58e7608a88188000c3353398ebe3b
Author:        Alexey Makhalov <amakhalov@vmware.com>
AuthorDate:    Mon, 23 Mar 2020 19:57:05 
Committer:     Borislav Petkov <bp@suse.de>
CommitterDate: Tue, 24 Mar 2020 10:04:51 +01:00

x86/vmware: Add steal time clock support for VMware guests

Steal time is the amount of CPU time needed by a guest virtual machine
that is not provided by the host. Steal time occurs when the host
allocates this CPU time elsewhere, for example, to another guest.

Steal time can be enabled by adding the VM configuration option
stealclock.enable = "TRUE". It is supported by VMs that run hardware
version 13 or newer.

Introduce the VMware steal time infrastructure. The high level code
(such as enabling, disabling and hot-plug routines) was derived from KVM.

 [ Tomer: use READ_ONCE macros and 32bit guests support. ]
 [ bp: Massage. ]

Co-developed-by: Tomer Zeltzer <tomerr90@gmail.com>
Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Tomer Zeltzer <tomerr90@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200323195707.31242-4-amakhalov@vmware.com
---
 arch/x86/kernel/cpu/vmware.c | 197 ++++++++++++++++++++++++++++++++++-
 1 file changed, 197 insertions(+)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index efb22fa..cc60461 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -25,6 +25,8 @@
 #include <linux/init.h>
 #include <linux/export.h>
 #include <linux/clocksource.h>
+#include <linux/cpu.h>
+#include <linux/reboot.h>
 #include <asm/div64.h>
 #include <asm/x86_init.h>
 #include <asm/hypervisor.h>
@@ -47,6 +49,11 @@
 #define VMWARE_CMD_GETVCPU_INFO  68
 #define VMWARE_CMD_LEGACY_X2APIC  3
 #define VMWARE_CMD_VCPU_RESERVED 31
+#define VMWARE_CMD_STEALCLOCK    91
+
+#define STEALCLOCK_NOT_AVAILABLE (-1)
+#define STEALCLOCK_DISABLED        0
+#define STEALCLOCK_ENABLED         1
 
 #define VMWARE_PORT(cmd, eax, ebx, ecx, edx)				\
 	__asm__("inl (%%dx), %%eax" :					\
@@ -86,6 +93,18 @@
 	}							\
 	} while (0)
 
+struct vmware_steal_time {
+	union {
+		uint64_t clock;	/* stolen time counter in units of vtsc */
+		struct {
+			/* only for little-endian */
+			uint32_t clock_low;
+			uint32_t clock_high;
+		};
+	};
+	uint64_t reserved[7];
+};
+
 static unsigned long vmware_tsc_khz __ro_after_init;
 static u8 vmware_hypercall_mode     __ro_after_init;
 
@@ -104,6 +123,8 @@ static unsigned long vmware_get_tsc_khz(void)
 #ifdef CONFIG_PARAVIRT
 static struct cyc2ns_data vmware_cyc2ns __ro_after_init;
 static int vmw_sched_clock __initdata = 1;
+static DEFINE_PER_CPU_DECRYPTED(struct vmware_steal_time, vmw_steal_time) __aligned(64);
+static bool has_steal_clock;
 
 static __init int setup_vmw_sched_clock(char *s)
 {
@@ -135,6 +156,163 @@ static void __init vmware_cyc2ns_setup(void)
 	pr_info("using clock offset of %llu ns\n", d->cyc2ns_offset);
 }
 
+static int vmware_cmd_stealclock(uint32_t arg1, uint32_t arg2)
+{
+	uint32_t result, info;
+
+	asm volatile (VMWARE_HYPERCALL :
+		"=a"(result),
+		"=c"(info) :
+		"a"(VMWARE_HYPERVISOR_MAGIC),
+		"b"(0),
+		"c"(VMWARE_CMD_STEALCLOCK),
+		"d"(0),
+		"S"(arg1),
+		"D"(arg2) :
+		"memory");
+	return result;
+}
+
+static bool stealclock_enable(phys_addr_t pa)
+{
+	return vmware_cmd_stealclock(upper_32_bits(pa),
+				     lower_32_bits(pa)) == STEALCLOCK_ENABLED;
+}
+
+static int __stealclock_disable(void)
+{
+	return vmware_cmd_stealclock(0, 1);
+}
+
+static void stealclock_disable(void)
+{
+	__stealclock_disable();
+}
+
+static bool vmware_is_stealclock_available(void)
+{
+	return __stealclock_disable() != STEALCLOCK_NOT_AVAILABLE;
+}
+
+/**
+ * vmware_steal_clock() - read the per-cpu steal clock
+ * @cpu:            the cpu number whose steal clock we want to read
+ *
+ * The function reads the steal clock if we are on a 64-bit system, otherwise
+ * reads it in parts, checking that the high part didn't change in the
+ * meantime.
+ *
+ * Return:
+ *      The steal clock reading in ns.
+ */
+static uint64_t vmware_steal_clock(int cpu)
+{
+	struct vmware_steal_time *steal = &per_cpu(vmw_steal_time, cpu);
+	uint64_t clock;
+
+	if (IS_ENABLED(CONFIG_64BIT))
+		clock = READ_ONCE(steal->clock);
+	else {
+		uint32_t initial_high, low, high;
+
+		do {
+			initial_high = READ_ONCE(steal->clock_high);
+			/* Do not reorder initial_high and high readings */
+			virt_rmb();
+			low = READ_ONCE(steal->clock_low);
+			/* Keep low reading in between */
+			virt_rmb();
+			high = READ_ONCE(steal->clock_high);
+		} while (initial_high != high);
+
+		clock = ((uint64_t)high << 32) | low;
+	}
+
+	return mul_u64_u32_shr(clock, vmware_cyc2ns.cyc2ns_mul,
+			     vmware_cyc2ns.cyc2ns_shift);
+}
+
+static void vmware_register_steal_time(void)
+{
+	int cpu = smp_processor_id();
+	struct vmware_steal_time *st = &per_cpu(vmw_steal_time, cpu);
+
+	if (!has_steal_clock)
+		return;
+
+	if (!stealclock_enable(slow_virt_to_phys(st))) {
+		has_steal_clock = false;
+		return;
+	}
+
+	pr_info("vmware-stealtime: cpu %d, pa %llx\n",
+		cpu, (unsigned long long) slow_virt_to_phys(st));
+}
+
+static void vmware_disable_steal_time(void)
+{
+	if (!has_steal_clock)
+		return;
+
+	stealclock_disable();
+}
+
+static void vmware_guest_cpu_init(void)
+{
+	if (has_steal_clock)
+		vmware_register_steal_time();
+}
+
+static void vmware_pv_guest_cpu_reboot(void *unused)
+{
+	vmware_disable_steal_time();
+}
+
+static int vmware_pv_reboot_notify(struct notifier_block *nb,
+				unsigned long code, void *unused)
+{
+	if (code == SYS_RESTART)
+		on_each_cpu(vmware_pv_guest_cpu_reboot, NULL, 1);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block vmware_pv_reboot_nb = {
+	.notifier_call = vmware_pv_reboot_notify,
+};
+
+#ifdef CONFIG_SMP
+static void __init vmware_smp_prepare_boot_cpu(void)
+{
+	vmware_guest_cpu_init();
+	native_smp_prepare_boot_cpu();
+}
+
+static int vmware_cpu_online(unsigned int cpu)
+{
+	local_irq_disable();
+	vmware_guest_cpu_init();
+	local_irq_enable();
+	return 0;
+}
+
+static int vmware_cpu_down_prepare(unsigned int cpu)
+{
+	local_irq_disable();
+	vmware_disable_steal_time();
+	local_irq_enable();
+	return 0;
+}
+#endif
+
+static __init int activate_jump_labels(void)
+{
+	if (has_steal_clock)
+		static_key_slow_inc(&paravirt_steal_enabled);
+
+	return 0;
+}
+arch_initcall(activate_jump_labels);
+
 static void __init vmware_paravirt_ops_setup(void)
 {
 	pv_info.name = "VMware hypervisor";
@@ -148,6 +326,25 @@ static void __init vmware_paravirt_ops_setup(void)
 	if (vmw_sched_clock)
 		pv_ops.time.sched_clock = vmware_sched_clock;
 
+	if (vmware_is_stealclock_available()) {
+		has_steal_clock = true;
+		pv_ops.time.steal_clock = vmware_steal_clock;
+
+		/* We use reboot notifier only to disable steal clock */
+		register_reboot_notifier(&vmware_pv_reboot_nb);
+
+#ifdef CONFIG_SMP
+		smp_ops.smp_prepare_boot_cpu =
+			vmware_smp_prepare_boot_cpu;
+		if (cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN,
+					      "x86/vmware:online",
+					      vmware_cpu_online,
+					      vmware_cpu_down_prepare) < 0)
+			pr_err("vmware_guest: Failed to install cpu hotplug callbacks\n");
+#else
+		vmware_guest_cpu_init();
+#endif
+	}
 }
 #else
 #define vmware_paravirt_ops_setup() do {} while (0)

[PATCH 1/5] x86/vmware: Make vmware_select_hypercall() __init

[Alexey Makhalov]

vmware_select_hypercall() is used only by the __init
functions, and should be annotated with __init as well.

Signed-off-by: Alexey Makhalov <amakhalov@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
---
 arch/x86/kernel/cpu/vmware.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 46d732696c1c..d280560fd75e 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -213,7 +213,7 @@ static void __init vmware_platform_setup(void)
 	vmware_set_capabilities();
 }
 
-static u8 vmware_select_hypercall(void)
+static u8 __init vmware_select_hypercall(void)
 {
 	int eax, ebx, ecx, edx;
 
-- 
2.14.2