All of lore.kernel.org
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: groug@kaod.org, philmd@redhat.com, qemu-devel@nongnu.org, clg@kaod.org
Cc: lvivier@redhat.com, aik@ozlabs.ru,
	Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>,
	paulus@samba.org, qemu-ppc@nongnu.org,
	David Gibson <david@gibson.dropbear.id.au>
Subject: [PATCH v3 12/12] target/ppc: Don't store VRMA SLBE persistently
Date: Wed, 19 Feb 2020 11:54:14 +1100	[thread overview]
Message-ID: <20200219005414.15635-13-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20200219005414.15635-1-david@gibson.dropbear.id.au>

Currently, we construct the SLBE used for VRMA translations when the LPCR
is written (which controls some bits in the SLBE), then use it later for
translations.

This is a bit complex and confusing - simplify it by simply constructing
the SLBE directly from the LPCR when we need it.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
 target/ppc/cpu.h        |  3 ---
 target/ppc/mmu-hash64.c | 27 ++++++---------------------
 2 files changed, 6 insertions(+), 24 deletions(-)

diff --git a/target/ppc/cpu.h b/target/ppc/cpu.h
index f9871b1233..5a55fb02bd 100644
--- a/target/ppc/cpu.h
+++ b/target/ppc/cpu.h
@@ -1044,9 +1044,6 @@ struct CPUPPCState {
     uint32_t flags;
     uint64_t insns_flags;
     uint64_t insns_flags2;
-#if defined(TARGET_PPC64)
-    ppc_slb_t vrma_slb;
-#endif
 
     int error_code;
     uint32_t pending_interrupts;
diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
index 06cfff9860..d93dcf3a08 100644
--- a/target/ppc/mmu-hash64.c
+++ b/target/ppc/mmu-hash64.c
@@ -827,6 +827,7 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
 {
     CPUState *cs = CPU(cpu);
     CPUPPCState *env = &cpu->env;
+    ppc_slb_t vrma_slbe;
     ppc_slb_t *slb;
     unsigned apshift;
     hwaddr ptex;
@@ -865,8 +866,8 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr eaddr,
             }
         } else if (ppc_hash64_use_vrma(env)) {
             /* Emulated VRMA mode */
-            slb = &env->vrma_slb;
-            if (!slb->sps) {
+            slb = &vrma_slbe;
+            if (build_vrma_slbe(cpu, slb) != 0) {
                 /* Invalid VRMA setup, machine check */
                 cs->exception_index = POWERPC_EXCP_MCHECK;
                 env->error_code = 0;
@@ -1014,6 +1015,7 @@ skip_slb_search:
 hwaddr ppc_hash64_get_phys_page_debug(PowerPCCPU *cpu, target_ulong addr)
 {
     CPUPPCState *env = &cpu->env;
+    ppc_slb_t vrma_slbe;
     ppc_slb_t *slb;
     hwaddr ptex, raddr;
     ppc_hash_pte64_t pte;
@@ -1035,8 +1037,8 @@ hwaddr ppc_hash64_get_phys_page_debug(PowerPCCPU *cpu, target_ulong addr)
             return raddr | env->spr[SPR_HRMOR];
         } else if (ppc_hash64_use_vrma(env)) {
             /* Emulated VRMA mode */
-            slb = &env->vrma_slb;
-            if (!slb->sps) {
+            slb = &vrma_slbe;
+            if (build_vrma_slbe(cpu, slb) != 0) {
                 return -1;
             }
         } else {
@@ -1074,29 +1076,12 @@ void ppc_hash64_tlb_flush_hpte(PowerPCCPU *cpu, target_ulong ptex,
     cpu->env.tlb_need_flush = TLB_NEED_GLOBAL_FLUSH | TLB_NEED_LOCAL_FLUSH;
 }
 
-static void ppc_hash64_update_vrma(PowerPCCPU *cpu)
-{
-    CPUPPCState *env = &cpu->env;
-    ppc_slb_t *slb = &env->vrma_slb;
-
-    /* Is VRMA enabled ? */
-    if (ppc_hash64_use_vrma(env)) {
-        if (build_vrma_slbe(cpu, slb) == 0)
-            return;
-    }
-
-    /* Otherwise, clear it to indicate error */
-    slb->esid = slb->vsid = 0;
-    slb->sps = NULL;
-}
-
 void ppc_store_lpcr(PowerPCCPU *cpu, target_ulong val)
 {
     PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(cpu);
     CPUPPCState *env = &cpu->env;
 
     env->spr[SPR_LPCR] = val & pcc->lpcr_mask;
-    ppc_hash64_update_vrma(cpu);
 }
 
 void helper_store_lpcr(CPUPPCState *env, target_ulong val)
-- 
2.24.1



  parent reply	other threads:[~2020-02-19  0:58 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-19  0:54 [PATCH v3 00/12] target/ppc: Correct some errors with real mode handling David Gibson
2020-02-19  0:54 ` [PATCH v3 01/12] ppc: Remove stub support for 32-bit hypervisor mode David Gibson
2020-02-19 14:15   ` Fabiano Rosas
2020-02-19  0:54 ` [PATCH v3 02/12] ppc: Remove stub of PPC970 HID4 implementation David Gibson
2020-02-19 11:18   ` BALATON Zoltan
2020-02-20  0:36     ` David Gibson
2020-02-19  0:54 ` [PATCH v3 03/12] target/ppc: Correct handling of real mode accesses with vhyp on hash MMU David Gibson
2020-02-19  0:54 ` [PATCH v3 04/12] target/ppc: Introduce ppc_hash64_use_vrma() helper David Gibson
2020-02-19 14:06   ` Fabiano Rosas
2020-02-20  2:41     ` Paul Mackerras
2020-02-20  3:10     ` David Gibson
2020-02-19  0:54 ` [PATCH v3 05/12] spapr, ppc: Remove VPM0/RMLS hacks for POWER9 David Gibson
2020-02-19  0:54 ` [PATCH v3 06/12] target/ppc: Remove RMOR register from POWER9 & POWER10 David Gibson
2020-02-19  0:54 ` [PATCH v3 07/12] target/ppc: Use class fields to simplify LPCR masking David Gibson
2020-02-19  0:54 ` [PATCH v3 08/12] target/ppc: Streamline calculation of RMA limit from LPCR[RMLS] David Gibson
2020-02-19  0:54 ` [PATCH v3 09/12] target/ppc: Correct RMLS table David Gibson
2020-02-19  0:54 ` [PATCH v3 10/12] target/ppc: Only calculate RMLS derived RMA limit on demand David Gibson
2020-02-19  0:54 ` [PATCH v3 11/12] target/ppc: Streamline construction of VRMA SLB entry David Gibson
2020-02-19 14:34   ` Fabiano Rosas
2020-02-20  3:13     ` David Gibson
2020-02-19  0:54 ` David Gibson [this message]
2020-02-19  1:21 ` [PATCH v3 00/12] target/ppc: Correct some errors with real mode handling no-reply
2020-02-19  2:11 ` David Gibson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200219005414.15635-13-david@gibson.dropbear.id.au \
    --to=david@gibson.dropbear.id.au \
    --cc=aik@ozlabs.ru \
    --cc=clg@kaod.org \
    --cc=groug@kaod.org \
    --cc=lvivier@redhat.com \
    --cc=mark.cave-ayland@ilande.co.uk \
    --cc=paulus@samba.org \
    --cc=philmd@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.