* [PATCH] regulator: add smb208 support
@ 2020-02-19 16:37 Ansuel Smith
2020-02-26 11:38 ` Lee Jones
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Ansuel Smith @ 2020-02-19 16:37 UTC (permalink / raw)
Cc: Ansuel Smith, Adrian Panella, Andy Gross, Bjorn Andersson,
Lee Jones, Rob Herring, Mark Rutland, Liam Girdwood, Mark Brown,
linux-arm-msm, devicetree, linux-kernel
Smb208 regulators are used on some ipq806x soc.
Add support for it to make it avaiable on some routers
that use it.
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++
2 files changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 3c91ad430eea..b823b8625243 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -61,6 +61,7 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8901-regulators"
"qcom,rpm-pm8921-regulators"
"qcom,rpm-pm8018-regulators"
+ "qcom,rpm-smb208-regulators"
- vdd_l0_l1_lvs-supply:
- vdd_l2_l11_l12-supply:
@@ -171,6 +172,9 @@ pm8018:
s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
l12, l14, lvs1
+smb208:
+ s1a, s1b, s2a, s2b
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt - with additional custom properties described below:
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index 7407cd5a1b74..7fc97f23fcf4 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -925,12 +925,21 @@ static const struct rpm_regulator_data rpm_pm8921_regulators[] = {
{ }
};
+static const struct rpm_regulator_data rpm_smb208_regulators[] = {
+ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
+ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
+ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" },
+ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" },
+ { }
+};
+
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8018-regulators",
.data = &rpm_pm8018_regulators },
{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
+ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
{ }
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
--
2.25.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH] regulator: add smb208 support
2020-02-19 16:37 [PATCH] regulator: add smb208 support Ansuel Smith
@ 2020-02-26 11:38 ` Lee Jones
2020-02-26 15:37 ` Rob Herring
2020-02-26 18:48 ` Applied "regulator: add smb208 support" to the regulator tree Mark Brown
2 siblings, 0 replies; 4+ messages in thread
From: Lee Jones @ 2020-02-26 11:38 UTC (permalink / raw)
To: Ansuel Smith
Cc: Adrian Panella, Andy Gross, Bjorn Andersson, Rob Herring,
Mark Rutland, Liam Girdwood, Mark Brown, linux-arm-msm,
devicetree, linux-kernel
On Wed, 19 Feb 2020, Ansuel Smith wrote:
> Smb208 regulators are used on some ipq806x soc.
> Add support for it to make it avaiable on some routers
> that use it.
>
> Signed-off-by: Adrian Panella <ianchi74@outlook.com>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
Acked-by: Lee Jones <lee.jones@linaro.org>
> drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++
> 2 files changed, 13 insertions(+)
--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] regulator: add smb208 support
2020-02-19 16:37 [PATCH] regulator: add smb208 support Ansuel Smith
2020-02-26 11:38 ` Lee Jones
@ 2020-02-26 15:37 ` Rob Herring
2020-02-26 18:48 ` Applied "regulator: add smb208 support" to the regulator tree Mark Brown
2 siblings, 0 replies; 4+ messages in thread
From: Rob Herring @ 2020-02-26 15:37 UTC (permalink / raw)
To: Ansuel Smith
Cc: Ansuel Smith, Adrian Panella, Andy Gross, Bjorn Andersson,
Lee Jones, linux-arm-msm, devicetree, linux-kernel
On Wed, 19 Feb 2020 17:37:11 +0100, Ansuel Smith wrote:
> Smb208 regulators are used on some ipq806x soc.
> Add support for it to make it avaiable on some routers
> that use it.
>
> Signed-off-by: Adrian Panella <ianchi74@outlook.com>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
> drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++
> 2 files changed, 13 insertions(+)
>
Acked-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Applied "regulator: add smb208 support" to the regulator tree
2020-02-19 16:37 [PATCH] regulator: add smb208 support Ansuel Smith
2020-02-26 11:38 ` Lee Jones
2020-02-26 15:37 ` Rob Herring
@ 2020-02-26 18:48 ` Mark Brown
2 siblings, 0 replies; 4+ messages in thread
From: Mark Brown @ 2020-02-26 18:48 UTC (permalink / raw)
To: Ansuel Smith
Cc: Adrian Panella, Andy Gross, Bjorn Andersson, devicetree,
Lee Jones, Liam Girdwood, linux-arm-msm, linux-kernel,
Mark Brown, Mark Rutland, Rob Herring
The patch
regulator: add smb208 support
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
From b5f25304aece9f2e7eaab275bbb5461c666bf38c Mon Sep 17 00:00:00 2001
From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Wed, 19 Feb 2020 17:37:11 +0100
Subject: [PATCH] regulator: add smb208 support
Smb208 regulators are used on some ipq806x soc.
Add support for it to make it avaiable on some routers
that use it.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200219163711.479-1-ansuelsmth@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++
2 files changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
index 3c91ad430eea..b823b8625243 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
@@ -61,6 +61,7 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8901-regulators"
"qcom,rpm-pm8921-regulators"
"qcom,rpm-pm8018-regulators"
+ "qcom,rpm-smb208-regulators"
- vdd_l0_l1_lvs-supply:
- vdd_l2_l11_l12-supply:
@@ -171,6 +172,9 @@ pm8018:
s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
l12, l14, lvs1
+smb208:
+ s1a, s1b, s2a, s2b
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt - with additional custom properties described below:
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index 7407cd5a1b74..7fc97f23fcf4 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -925,12 +925,21 @@ static const struct rpm_regulator_data rpm_pm8921_regulators[] = {
{ }
};
+static const struct rpm_regulator_data rpm_smb208_regulators[] = {
+ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
+ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
+ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" },
+ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" },
+ { }
+};
+
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8018-regulators",
.data = &rpm_pm8018_regulators },
{ .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
{ .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
{ .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
+ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
{ }
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-02-26 18:48 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-19 16:37 [PATCH] regulator: add smb208 support Ansuel Smith
2020-02-26 11:38 ` Lee Jones
2020-02-26 15:37 ` Rob Herring
2020-02-26 18:48 ` Applied "regulator: add smb208 support" to the regulator tree Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.