[Intel-gfx] [PATCH] drm/i915/display: Decrease log level

* [Intel-gfx] [PATCH] drm/i915/display: Decrease log level
@ 2020-03-02 21:38 Swati Sharma
  2020-03-02 22:54 ` [Intel-gfx] ✗ Fi.CI.DOCS: warning for " Patchwork
                   ` (3 more replies)
  0 siblings, 4 replies; 6+ messages in thread
From: Swati Sharma @ 2020-03-02 21:38 UTC (permalink / raw)
  To: intel-gfx

Converting error to debug print if sink fails to configure scrambling or
TMDS bit clock ratio. In this case, we are timing out while disabling
the scrambling and setting the SCDC ratio, as there is no response
to the I2C SCDC write from the sink device. Error isn't due to something
wrong done from driver side.

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_ddi.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 284219da7df8..457ca88cd277 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3564,8 +3564,9 @@ static void intel_enable_ddi_hdmi(struct intel_encoder *encoder,
 	if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
 					       crtc_state->hdmi_high_tmds_clock_ratio,
 					       crtc_state->hdmi_scrambling))
-		DRM_ERROR("[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n",
-			  connector->base.id, connector->name);
+		DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Failed to configure sink "
+			      "scrambling/TMDS bit clock ratio\n",
+			       connector->base.id, connector->name);
 
 	/* Display WA #1143: skl,kbl,cfl */
 	if (IS_GEN9_BC(dev_priv)) {
-- 
2.24.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

^ permalink raw reply related	[flat|nested] 6+ messages in thread