* [PATCH v3 0/3] leds: add support for apa102c leds @ 2020-03-06 13:40 Nicolas Belin 2020-03-06 13:40 ` [PATCH v3 1/3] dt-bindings: Document shiji vendor-prefix Nicolas Belin ` (2 more replies) 0 siblings, 3 replies; 10+ messages in thread From: Nicolas Belin @ 2020-03-06 13:40 UTC (permalink / raw) To: linux-kernel, linux-leds, jacek.anaszewski, pavel, dmurphy, devicetree Cc: baylibre-upstreaming, Nicolas Belin This patch series adds the driver and its related documentation for the APA102C RGB Leds. Patch 1 adds the APA102C led manufacturer to the vendor-prefixes list. Patch 2 Documents the APA102C led driver. Patch 3 contains the actual driver code and modifications in the Kconfig and the Makefile. Updates since v1: - Moved the apa102c line in the Makefile to the LED SPI Drivers part - The driver is now based on the Multicolor Framework. Updates since v2: - The driver is now back to using the normal Led Framework. Nicolas Belin (3): dt-bindings: Document shiji vendor-prefix dt-bindings: leds: Shiji Lighting APA102C LED drivers: leds: add support for apa102c leds .../devicetree/bindings/leds/leds-apa102c.yaml | 97 +++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/leds/Kconfig | 11 + drivers/leds/Makefile | 1 + drivers/leds/leds-apa102c.c | 306 +++++++++++++++++++++ 5 files changed, 417 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-apa102c.yaml create mode 100644 drivers/leds/leds-apa102c.c -- 2.7.4 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 1/3] dt-bindings: Document shiji vendor-prefix 2020-03-06 13:40 [PATCH v3 0/3] leds: add support for apa102c leds Nicolas Belin @ 2020-03-06 13:40 ` Nicolas Belin 2020-03-09 21:05 ` Rob Herring 2020-03-06 13:40 ` [PATCH v3 2/3] dt-bindings: leds: Shiji Lighting APA102C LED Nicolas Belin 2020-03-06 13:40 ` [PATCH v3 3/3] drivers: leds: add support for apa102c leds Nicolas Belin 2 siblings, 1 reply; 10+ messages in thread From: Nicolas Belin @ 2020-03-06 13:40 UTC (permalink / raw) To: linux-kernel, linux-leds, jacek.anaszewski, pavel, dmurphy, devicetree Cc: baylibre-upstreaming, Nicolas Belin Shenzhen Shiji Lighting Co.,Ltd is a LED manufacturer. Signed-off-by: Nicolas Belin <nbelin@baylibre.com> --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 9e67944bec9c..a463286c3960 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -863,6 +863,8 @@ patternProperties: description: SGX Sensortech "^sharp,.*": description: Sharp Corporation + "^shiji,.*": + description: Shenzhen Shiji Lighting Co.,Ltd "^shimafuji,.*": description: Shimafuji Electric, Inc. "^si-en,.*": -- 2.7.4 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v3 1/3] dt-bindings: Document shiji vendor-prefix 2020-03-06 13:40 ` [PATCH v3 1/3] dt-bindings: Document shiji vendor-prefix Nicolas Belin @ 2020-03-09 21:05 ` Rob Herring 0 siblings, 0 replies; 10+ messages in thread From: Rob Herring @ 2020-03-09 21:05 UTC (permalink / raw) To: Nicolas Belin Cc: linux-kernel, linux-leds, jacek.anaszewski, pavel, dmurphy, devicetree, baylibre-upstreaming, Nicolas Belin On Fri, 6 Mar 2020 14:40:08 +0100, Nicolas Belin wrote: > Shenzhen Shiji Lighting Co.,Ltd is a LED manufacturer. > > Signed-off-by: Nicolas Belin <nbelin@baylibre.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ > 1 file changed, 2 insertions(+) > Please add Acked-by/Reviewed-by tags when posting new versions. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for acks received on the version they apply. If a tag was not added on purpose, please state why and what changed. ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 2/3] dt-bindings: leds: Shiji Lighting APA102C LED 2020-03-06 13:40 [PATCH v3 0/3] leds: add support for apa102c leds Nicolas Belin 2020-03-06 13:40 ` [PATCH v3 1/3] dt-bindings: Document shiji vendor-prefix Nicolas Belin @ 2020-03-06 13:40 ` Nicolas Belin 2020-03-06 20:19 ` Jacek Anaszewski 2020-03-13 13:06 ` Rob Herring 2020-03-06 13:40 ` [PATCH v3 3/3] drivers: leds: add support for apa102c leds Nicolas Belin 2 siblings, 2 replies; 10+ messages in thread From: Nicolas Belin @ 2020-03-06 13:40 UTC (permalink / raw) To: linux-kernel, linux-leds, jacek.anaszewski, pavel, dmurphy, devicetree Cc: baylibre-upstreaming, Nicolas Belin Document Shiji Lighting APA102C LED driver device tree bindings. Signed-off-by: Nicolas Belin <nbelin@baylibre.com> --- .../devicetree/bindings/leds/leds-apa102c.yaml | 97 ++++++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/leds-apa102c.yaml diff --git a/Documentation/devicetree/bindings/leds/leds-apa102c.yaml b/Documentation/devicetree/bindings/leds/leds-apa102c.yaml new file mode 100644 index 000000000000..21457fc3762d --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-apa102c.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-apa102c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LED driver for Shiji Lighting - APA102C + +maintainers: + - Nicolas Belin <nbelin@baylibre.com> + +description: + Each RGB LED is represented as a rgb-led sub-node of the leds-apa102c + device. Each LED is a three color rgb LED with an additional 32 levels + brightness adjustment. They can be cascaded so that multiple LEDs can be set + with a single command. + +properties: + compatible: + const: shiji,apa102c + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 1000000 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^rgb-led@[0-9]+$": + type: object + description: | + Array of connected RGB LEDs. + + properties: + reg: + description: | + This property corresponds to the led index. It has to be between 0 + and the number of managed leds minus 1 + maxItems: 1 + + label: + description: | + This property corresponds to the name of the RGB led. + maxItems: 1 + + linux,default-trigger: true + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + required: + - reg + - label + - '#address-cells' + - '#size-cells' + +required: + - compatible + - reg + - spi-max-frequency + - '#address-cells' + - '#size-cells' + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + led-controller@0 { + compatible = "shiji,apa102c"; + reg = <0>; + spi-max-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + rgb-led@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + label = "rgb_led1"; + }; + rgb-led@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + label = "rgb_led2"; + }; + }; + }; -- 2.7.4 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v3 2/3] dt-bindings: leds: Shiji Lighting APA102C LED 2020-03-06 13:40 ` [PATCH v3 2/3] dt-bindings: leds: Shiji Lighting APA102C LED Nicolas Belin @ 2020-03-06 20:19 ` Jacek Anaszewski 2020-03-13 13:06 ` Rob Herring 1 sibling, 0 replies; 10+ messages in thread From: Jacek Anaszewski @ 2020-03-06 20:19 UTC (permalink / raw) To: Nicolas Belin, linux-kernel, linux-leds, pavel, dmurphy, devicetree Cc: baylibre-upstreaming Hi Nicolas, On 3/6/20 2:40 PM, Nicolas Belin wrote: > Document Shiji Lighting APA102C LED driver device tree bindings. > > Signed-off-by: Nicolas Belin <nbelin@baylibre.com> > --- > .../devicetree/bindings/leds/leds-apa102c.yaml | 97 ++++++++++++++++++++++ > 1 file changed, 97 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-apa102c.yaml > > diff --git a/Documentation/devicetree/bindings/leds/leds-apa102c.yaml b/Documentation/devicetree/bindings/leds/leds-apa102c.yaml > new file mode 100644 > index 000000000000..21457fc3762d > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/leds-apa102c.yaml > @@ -0,0 +1,97 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/leds/leds-apa102c.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: LED driver for Shiji Lighting - APA102C > + > +maintainers: > + - Nicolas Belin <nbelin@baylibre.com> > + > +description: > + Each RGB LED is represented as a rgb-led sub-node of the leds-apa102c > + device. Each LED is a three color rgb LED with an additional 32 levels > + brightness adjustment. They can be cascaded so that multiple LEDs can be set > + with a single command. > + > +properties: > + compatible: > + const: shiji,apa102c > + > + reg: > + maxItems: 1 > + > + spi-max-frequency: > + maximum: 1000000 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +patternProperties: > + "^rgb-led@[0-9]+$": > + type: object > + description: | > + Array of connected RGB LEDs. > + > + properties: > + reg: > + description: | > + This property corresponds to the led index. It has to be between 0 > + and the number of managed leds minus 1 > + maxItems: 1 > + > + label: As mentioned before - don't use label and use function and color properties instead. > + description: | > + This property corresponds to the name of the RGB led. > + maxItems: 1 > + > + linux,default-trigger: true > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + required: > + - reg > + - label > + - '#address-cells' > + - '#size-cells' > + > +required: > + - compatible > + - reg > + - spi-max-frequency > + - '#address-cells' > + - '#size-cells' > + > +examples: > + - | > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + led-controller@0 { > + compatible = "shiji,apa102c"; > + reg = <0>; > + spi-max-frequency = <1000000>; > + #address-cells = <1>; > + #size-cells = <0>; > + rgb-led@0 { s/rgb-led/led/ > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + label = "rgb_led1"; Instead of label please use function and color properties. E.g. color = LED_COLOR_ID_RED; function = LED_FUNCTION_STATUS; If the function of your interest is not available in include/dt-bindings/leds/common.h then you can propose one. Please refer to Documentation/devicetree/bindings/leds/common.txt. > + }; > + rgb-led@1 { s/rgb-led/led/ > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + label = "rgb_led2"; > + }; You have to apply DT scheme from LED common bindings and have separate child node for each color of RGB LED. > + }; > + }; > -- Best regards, Jacek Anaszewski ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 2/3] dt-bindings: leds: Shiji Lighting APA102C LED 2020-03-06 13:40 ` [PATCH v3 2/3] dt-bindings: leds: Shiji Lighting APA102C LED Nicolas Belin 2020-03-06 20:19 ` Jacek Anaszewski @ 2020-03-13 13:06 ` Rob Herring 1 sibling, 0 replies; 10+ messages in thread From: Rob Herring @ 2020-03-13 13:06 UTC (permalink / raw) To: Nicolas Belin Cc: linux-kernel, linux-leds, jacek.anaszewski, pavel, dmurphy, devicetree, baylibre-upstreaming On Fri, Mar 06, 2020 at 02:40:09PM +0100, Nicolas Belin wrote: > Document Shiji Lighting APA102C LED driver device tree bindings. > > Signed-off-by: Nicolas Belin <nbelin@baylibre.com> > --- > .../devicetree/bindings/leds/leds-apa102c.yaml | 97 ++++++++++++++++++++++ > 1 file changed, 97 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-apa102c.yaml > > diff --git a/Documentation/devicetree/bindings/leds/leds-apa102c.yaml b/Documentation/devicetree/bindings/leds/leds-apa102c.yaml > new file mode 100644 > index 000000000000..21457fc3762d > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/leds-apa102c.yaml > @@ -0,0 +1,97 @@ > +# SPDX-License-Identifier: GPL-2.0 Dual license new bindings: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/leds/leds-apa102c.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: LED driver for Shiji Lighting - APA102C > + > +maintainers: > + - Nicolas Belin <nbelin@baylibre.com> > + > +description: > + Each RGB LED is represented as a rgb-led sub-node of the leds-apa102c > + device. Each LED is a three color rgb LED with an additional 32 levels > + brightness adjustment. They can be cascaded so that multiple LEDs can be set > + with a single command. > + > +properties: > + compatible: > + const: shiji,apa102c > + > + reg: > + maxItems: 1 > + > + spi-max-frequency: > + maximum: 1000000 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +patternProperties: > + "^rgb-led@[0-9]+$": > + type: object > + description: | > + Array of connected RGB LEDs. This should reference leds/common.yaml: allOf: - $ref: common.yaml# > + > + properties: > + reg: > + description: | > + This property corresponds to the led index. It has to be between 0 > + and the number of managed leds minus 1 > + maxItems: 1 > + > + label: > + description: | > + This property corresponds to the name of the RGB led. > + maxItems: 1 > + > + linux,default-trigger: true > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + required: > + - reg > + - label > + - '#address-cells' > + - '#size-cells' > + > +required: > + - compatible > + - reg > + - spi-max-frequency > + - '#address-cells' > + - '#size-cells' Add: additionalProperties: false > + > +examples: > + - | > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + led-controller@0 { > + compatible = "shiji,apa102c"; > + reg = <0>; > + spi-max-frequency = <1000000>; > + #address-cells = <1>; > + #size-cells = <0>; > + rgb-led@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + label = "rgb_led1"; > + }; > + rgb-led@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + label = "rgb_led2"; > + }; > + }; > + }; > -- > 2.7.4 > ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v3 3/3] drivers: leds: add support for apa102c leds 2020-03-06 13:40 [PATCH v3 0/3] leds: add support for apa102c leds Nicolas Belin 2020-03-06 13:40 ` [PATCH v3 1/3] dt-bindings: Document shiji vendor-prefix Nicolas Belin 2020-03-06 13:40 ` [PATCH v3 2/3] dt-bindings: leds: Shiji Lighting APA102C LED Nicolas Belin @ 2020-03-06 13:40 ` Nicolas Belin 2020-03-06 20:20 ` Jacek Anaszewski 2020-03-24 9:42 ` Pavel Machek 2 siblings, 2 replies; 10+ messages in thread From: Nicolas Belin @ 2020-03-06 13:40 UTC (permalink / raw) To: linux-kernel, linux-leds, jacek.anaszewski, pavel, dmurphy, devicetree Cc: baylibre-upstreaming, Nicolas Belin Initilial commit in order to support the apa102c RGB leds. The RGB and global brightness management is done by creating 4 leds from the Led Framework per apa102c led. Signed-off-by: Nicolas Belin <nbelin@baylibre.com> --- drivers/leds/Kconfig | 11 ++ drivers/leds/Makefile | 1 + drivers/leds/leds-apa102c.c | 306 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 318 insertions(+) create mode 100644 drivers/leds/leds-apa102c.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index d82f1dea3711..28fa6c4f65cc 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -69,6 +69,17 @@ config LEDS_AN30259A To compile this driver as a module, choose M here: the module will be called leds-an30259a. +config LEDS_APA102C + tristate "LED Support for Shiji APA102C" + depends on SPI + depends on LEDS_CLASS + help + This option enables support for the APA102C RGB LEDs + from Shiji Lighting. + + To compile this driver as a module, choose M here: the module + will be called leds-apa102c. + config LEDS_APU tristate "Front panel LED support for PC Engines APU/APU2/APU3 boards" depends on LEDS_CLASS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index d7e1107753fb..28dfe82900c5 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o # LED SPI Drivers +obj-$(CONFIG_LEDS_APA102C) += leds-apa102c.o obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o obj-$(CONFIG_LEDS_EL15203000) += leds-el15203000.o diff --git a/drivers/leds/leds-apa102c.c b/drivers/leds/leds-apa102c.c new file mode 100644 index 000000000000..0043e7a6235b --- /dev/null +++ b/drivers/leds/leds-apa102c.c @@ -0,0 +1,306 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/spi/spi.h> +#include <uapi/linux/uleds.h> +#include "leds.h" + +/* + * Copyright (C) 2020 BayLibre, SAS + * Author: Nicolas Belin <nbelin@baylibre.com> + */ + +/* + * APA102C SPI protocol description: + * +------+----------------------------------------+------+ + * |START | DATA FIELD: | END | + * |FRAME | N LED FRAMES |FRAME | + * +------+------+------+------+------+-----+------+------+ + * | 0*32 | LED1 | LED2 | LED3 | LED4 | --- | LEDN | 1*32 | + * +------+------+------+------+------+-----+------+------+ + * + * +-----------------------------------+ + * |START FRAME 32bits | + * +--------+--------+--------+--------+ + * |00000000|00000000|00000000|00000000| + * +--------+--------+--------+--------+ + * + * +------------------------------------+ + * |LED FRAME 32bits | + * +---+-----+--------+--------+--------+ + * |111|LUMA | BLUE | GREEN | RED | + * +---+-----+--------+--------+--------+ + * |3b |5bits| 8bits | 8bits | 8bits | + * +---+-----+--------+--------+--------+ + * |MSB LSB|MSB LSB|MSB LSB|MSB LSB| + * +---+-----+--------+--------+--------+ + * + * +-----------------------------------+ + * |END FRAME 32bits | + * +--------+--------+--------+--------+ + * |11111111|11111111|11111111|11111111| + * +--------+--------+--------+--------+ + */ + +/* apa102c default settings */ +#define GLOBAL_MAX_BRIGHTNESS GENMASK(4, 0) +#define RGB_MAX_BRIGHTNESS GENMASK(7, 0) +#define START_BYTE 0 +#define END_BYTE GENMASK(7, 0) +#define LED_FRAME_HEADER GENMASK(7, 5) + +struct apa102c_led { + struct apa102c *priv; + char name[LED_MAX_NAME_SIZE]; + int color_id; + struct led_classdev cdev; +}; + +struct apa102c_rgbled { + /* the 4 components of the apa102c rgb led: + * global brightness, blue, green and red in that order + */ + struct apa102c_led component[4]; +}; + +struct apa102c { + size_t led_count; + struct device *dev; + struct mutex lock; + struct spi_device *spi; + u8 *spi_buf; + struct apa102c_rgbled rgb_leds[]; +}; + +static int apa102c_sync(struct apa102c *priv) +{ + int ret; + size_t i; + struct apa102c_rgbled *leds = priv->rgb_leds; + u8 *buf = priv->spi_buf; + + /* creating the data that will be sent to all the leds at once */ + for (i = 0; i < 4; i++) + *buf++ = START_BYTE; + + /* looping on each RGB led component, getting the global brightness + * then B, G and R values + */ + for (i = 0; i < priv->led_count; i++) { + *buf++ = LED_FRAME_HEADER | + leds[i].component[0].cdev.brightness; + *buf++ = leds[i].component[1].cdev.brightness; + *buf++ = leds[i].component[2].cdev.brightness; + *buf++ = leds[i].component[3].cdev.brightness; + } + + for (i = 0; i < 4; i++) + *buf++ = END_BYTE; + + ret = spi_write(priv->spi, priv->spi_buf, + (priv->led_count + 2) * sizeof(u32)); + + return ret; +} + +static int apa102c_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + int ret; + struct apa102c_led *led = container_of(cdev, + struct apa102c_led, + cdev); + + mutex_lock(&led->priv->lock); + /* updating the brightness then synching all the leds */ + cdev->brightness = brightness; + ret = apa102c_sync(led->priv); + mutex_unlock(&led->priv->lock); + + return ret; +} + +static int apa102c_probe_dt(struct apa102c *priv) +{ + int ret = 0; + u32 i; + struct apa102c_rgbled *rgb_led; + struct apa102c_led *led; + struct fwnode_handle *child; + const char *rgb_led_name; + const char *led_component_name; + + /* each node corresponds to an rgb led */ + device_for_each_child_node(priv->dev, child) { + + ret = fwnode_property_read_u32(child, "reg", &i); + if (ret) { + dev_err(priv->dev, "coudld not read reg %d\n", ret); + goto child_out; + } + + if (i >= priv->led_count) { + ret = -EINVAL; + dev_err(priv->dev, "reg value too big\n"); + goto child_out; + } + + rgb_led = &priv->rgb_leds[i]; + /* checking if this led config is already used by checking if + * the priv member of the global_brightness led as already + * been set + */ + if (rgb_led->component[0].priv) { + ret = -EINVAL; + dev_err(priv->dev, "using the same reg value twice\n"); + goto child_out; + } + + ret = fwnode_property_read_string(child, "label", + &rgb_led_name); + if (ret) { + ret = -EINVAL; + dev_err(priv->dev, "missing rgb led name\n"); + goto child_out; + } + + /* setting a color_id value for each of the 4 components of the + * apa102c RGB led. The first component is the global brightness + * of the led and thus has no color. The order of the colors + * after the global brightness is then blue, green and red + * in that order. It corresponds to the order in which the + * values are sent using spi + */ + rgb_led->component[0].color_id = -1; //no color + rgb_led->component[1].color_id = LED_COLOR_ID_BLUE; + rgb_led->component[2].color_id = LED_COLOR_ID_GREEN; + rgb_led->component[3].color_id = LED_COLOR_ID_RED; + + /* now looping on each component and registering a corresponding + * led + */ + for (i = 0; i < 4; i++) { + led = &rgb_led->component[i]; + if (led->color_id == -1) { + /* the global brightness has no defined name + * so setting it to "brightness". It also has + * a different MAX_BRIGHTNESS value. + * If a trigger is present, setting it on this + * component + */ + led->cdev.max_brightness = + GLOBAL_MAX_BRIGHTNESS; + led_component_name = "brightness"; + fwnode_property_read_string(child, + "linux,default-trigger", + &led->cdev.default_trigger); + } else { + /* using the color name defined by the framework + * for the B, G and R components + */ + led->cdev.max_brightness = RGB_MAX_BRIGHTNESS; + led_component_name = led_colors[led->color_id]; + } + + /* the rest is common to all the components */ + led->priv = priv; + led->cdev.brightness_set_blocking = + apa102c_brightness_set; + /* creating our own led name to differentiate the 4 + * components + */ + snprintf(led->name, sizeof(led->name), + "%s_%s", rgb_led_name, led_component_name); + led->cdev.name = led->name; + + ret = devm_led_classdev_register_ext(priv->dev, + &led->cdev, + NULL); + if (ret) { + dev_err(priv->dev, "led register err: %d\n", + ret); + goto child_out; + } + } + } + +child_out: + return ret; +} + +static int apa102c_probe(struct spi_device *spi) +{ + struct apa102c *priv; + size_t led_count; + int ret; + + led_count = device_get_child_node_count(&spi->dev); + if (!led_count) { + dev_err(&spi->dev, "No LEDs defined in device tree!"); + return -ENODEV; + } + + priv = devm_kzalloc(&spi->dev, + struct_size(priv, rgb_leds, led_count), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->spi_buf = devm_kzalloc(&spi->dev, + (led_count + 2) * sizeof(u32), + GFP_KERNEL); + if (!priv->spi_buf) + return -ENOMEM; + + mutex_init(&priv->lock); + priv->led_count = led_count; + priv->dev = &spi->dev; + priv->spi = spi; + + ret = apa102c_probe_dt(priv); + if (ret) + return ret; + + /* Set the LEDs with default values at start */ + apa102c_sync(priv); + if (ret) + return ret; + + spi_set_drvdata(spi, priv); + + return 0; +} + +static int apa102c_remove(struct spi_device *spi) +{ + struct apa102c *priv = spi_get_drvdata(spi); + + mutex_destroy(&priv->lock); + + return 0; +} + +static const struct of_device_id apa102c_dt_ids[] = { + { .compatible = "shiji,apa102c", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, apa102c_dt_ids); + +static struct spi_driver apa102c_driver = { + .probe = apa102c_probe, + .remove = apa102c_remove, + .driver = { + .name = KBUILD_MODNAME, + .of_match_table = apa102c_dt_ids, + }, +}; + +module_spi_driver(apa102c_driver); + +MODULE_AUTHOR("Nicolas Belin <nbelin@baylibre.com>"); +MODULE_DESCRIPTION("apa102c LED driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("spi:apa102c"); -- 2.7.4 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v3 3/3] drivers: leds: add support for apa102c leds 2020-03-06 13:40 ` [PATCH v3 3/3] drivers: leds: add support for apa102c leds Nicolas Belin @ 2020-03-06 20:20 ` Jacek Anaszewski 2020-03-09 9:59 ` Nicolas Belin 2020-03-24 9:42 ` Pavel Machek 1 sibling, 1 reply; 10+ messages in thread From: Jacek Anaszewski @ 2020-03-06 20:20 UTC (permalink / raw) To: Nicolas Belin, linux-kernel, linux-leds, pavel, dmurphy, devicetree Cc: baylibre-upstreaming Hi Nicolas, On 3/6/20 2:40 PM, Nicolas Belin wrote: > Initilial commit in order to support the apa102c RGB leds. The > RGB and global brightness management is done by creating 4 leds > from the Led Framework per apa102c led. > > Signed-off-by: Nicolas Belin <nbelin@baylibre.com> > --- > drivers/leds/Kconfig | 11 ++ > drivers/leds/Makefile | 1 + > drivers/leds/leds-apa102c.c | 306 ++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 318 insertions(+) > create mode 100644 drivers/leds/leds-apa102c.c > > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig > index d82f1dea3711..28fa6c4f65cc 100644 > --- a/drivers/leds/Kconfig > +++ b/drivers/leds/Kconfig > @@ -69,6 +69,17 @@ config LEDS_AN30259A > To compile this driver as a module, choose M here: the module > will be called leds-an30259a. > > +config LEDS_APA102C > + tristate "LED Support for Shiji APA102C" > + depends on SPI > + depends on LEDS_CLASS > + help > + This option enables support for the APA102C RGB LEDs > + from Shiji Lighting. > + > + To compile this driver as a module, choose M here: the module > + will be called leds-apa102c. > + > config LEDS_APU > tristate "Front panel LED support for PC Engines APU/APU2/APU3 boards" > depends on LEDS_CLASS > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile > index d7e1107753fb..28dfe82900c5 100644 > --- a/drivers/leds/Makefile > +++ b/drivers/leds/Makefile > @@ -88,6 +88,7 @@ obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o > obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o > > # LED SPI Drivers > +obj-$(CONFIG_LEDS_APA102C) += leds-apa102c.o > obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o > obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o > obj-$(CONFIG_LEDS_EL15203000) += leds-el15203000.o > diff --git a/drivers/leds/leds-apa102c.c b/drivers/leds/leds-apa102c.c > new file mode 100644 > index 000000000000..0043e7a6235b > --- /dev/null > +++ b/drivers/leds/leds-apa102c.c > @@ -0,0 +1,306 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <linux/leds.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/spi/spi.h> > +#include <uapi/linux/uleds.h> > +#include "leds.h" > + > +/* > + * Copyright (C) 2020 BayLibre, SAS > + * Author: Nicolas Belin <nbelin@baylibre.com> > + */ > + > +/* > + * APA102C SPI protocol description: > + * +------+----------------------------------------+------+ > + * |START | DATA FIELD: | END | > + * |FRAME | N LED FRAMES |FRAME | > + * +------+------+------+------+------+-----+------+------+ > + * | 0*32 | LED1 | LED2 | LED3 | LED4 | --- | LEDN | 1*32 | > + * +------+------+------+------+------+-----+------+------+ > + * > + * +-----------------------------------+ > + * |START FRAME 32bits | > + * +--------+--------+--------+--------+ > + * |00000000|00000000|00000000|00000000| > + * +--------+--------+--------+--------+ > + * > + * +------------------------------------+ > + * |LED FRAME 32bits | > + * +---+-----+--------+--------+--------+ > + * |111|LUMA | BLUE | GREEN | RED | > + * +---+-----+--------+--------+--------+ > + * |3b |5bits| 8bits | 8bits | 8bits | > + * +---+-----+--------+--------+--------+ > + * |MSB LSB|MSB LSB|MSB LSB|MSB LSB| > + * +---+-----+--------+--------+--------+ > + * > + * +-----------------------------------+ > + * |END FRAME 32bits | > + * +--------+--------+--------+--------+ > + * |11111111|11111111|11111111|11111111| > + * +--------+--------+--------+--------+ > + */ > + > +/* apa102c default settings */ > +#define GLOBAL_MAX_BRIGHTNESS GENMASK(4, 0) > +#define RGB_MAX_BRIGHTNESS GENMASK(7, 0) > +#define START_BYTE 0 > +#define END_BYTE GENMASK(7, 0) > +#define LED_FRAME_HEADER GENMASK(7, 5) > + > +struct apa102c_led { > + struct apa102c *priv; > + char name[LED_MAX_NAME_SIZE]; This is not needed, LED core takes care of parsing LED name. > + int color_id; > + struct led_classdev cdev; > +}; > + > +struct apa102c_rgbled { > + /* the 4 components of the apa102c rgb led: > + * global brightness, blue, green and red in that order > + */ > + struct apa102c_led component[4]; > +}; > + > +struct apa102c { > + size_t led_count; > + struct device *dev; > + struct mutex lock; > + struct spi_device *spi; > + u8 *spi_buf; > + struct apa102c_rgbled rgb_leds[]; > +}; > + > +static int apa102c_sync(struct apa102c *priv) > +{ > + int ret; > + size_t i; > + struct apa102c_rgbled *leds = priv->rgb_leds; > + u8 *buf = priv->spi_buf; > + > + /* creating the data that will be sent to all the leds at once */ > + for (i = 0; i < 4; i++) > + *buf++ = START_BYTE; > + > + /* looping on each RGB led component, getting the global brightness > + * then B, G and R values > + */ > + for (i = 0; i < priv->led_count; i++) { > + *buf++ = LED_FRAME_HEADER | > + leds[i].component[0].cdev.brightness; > + *buf++ = leds[i].component[1].cdev.brightness; > + *buf++ = leds[i].component[2].cdev.brightness; > + *buf++ = leds[i].component[3].cdev.brightness; > + } The problem is that in the monochrome LED approach (i.e. the only available one) you have to alter the state of only one LED - that on behalf of which the call is made. And anyway, you're doing here much too much, taking into account that this function is called from brightness_set op. Isn't it possible to update only one LED ? > + > + for (i = 0; i < 4; i++) > + *buf++ = END_BYTE; > + > + ret = spi_write(priv->spi, priv->spi_buf, > + (priv->led_count + 2) * sizeof(u32)); > + > + return ret; > +} > + > +static int apa102c_brightness_set(struct led_classdev *cdev, > + enum led_brightness brightness) > +{ > + int ret; > + struct apa102c_led *led = container_of(cdev, > + struct apa102c_led, > + cdev); > + > + mutex_lock(&led->priv->lock); > + /* updating the brightness then synching all the leds */ > + cdev->brightness = brightness; LED core handles that. Please drop this assignment. > + ret = apa102c_sync(led->priv); > + mutex_unlock(&led->priv->lock); > + > + return ret; > +} > + > +static int apa102c_probe_dt(struct apa102c *priv) > +{ > + int ret = 0; > + u32 i; > + struct apa102c_rgbled *rgb_led; > + struct apa102c_led *led; > + struct fwnode_handle *child; > + const char *rgb_led_name; > + const char *led_component_name; > + > + /* each node corresponds to an rgb led */ > + device_for_each_child_node(priv->dev, child) { > + > + ret = fwnode_property_read_u32(child, "reg", &i); > + if (ret) { > + dev_err(priv->dev, "coudld not read reg %d\n", ret); > + goto child_out; > + } > + > + if (i >= priv->led_count) { > + ret = -EINVAL; > + dev_err(priv->dev, "reg value too big\n"); > + goto child_out; > + } > + > + rgb_led = &priv->rgb_leds[i]; > + /* checking if this led config is already used by checking if > + * the priv member of the global_brightness led as already > + * been set > + */ > + if (rgb_led->component[0].priv) { > + ret = -EINVAL; > + dev_err(priv->dev, "using the same reg value twice\n"); > + goto child_out; > + } > + > + ret = fwnode_property_read_string(child, "label", > + &rgb_led_name); > + if (ret) { > + ret = -EINVAL; > + dev_err(priv->dev, "missing rgb led name\n"); > + goto child_out; > + } > + > + /* setting a color_id value for each of the 4 components of the > + * apa102c RGB led. The first component is the global brightness > + * of the led and thus has no color. The order of the colors > + * after the global brightness is then blue, green and red > + * in that order. It corresponds to the order in which the > + * values are sent using spi > + */ > + rgb_led->component[0].color_id = -1; //no color > + rgb_led->component[1].color_id = LED_COLOR_ID_BLUE; > + rgb_led->component[2].color_id = LED_COLOR_ID_GREEN; > + rgb_led->component[3].color_id = LED_COLOR_ID_RED; Each LED has to have separate DT node. We haven't had so far use case with global brightness but I think it would be OK to add LED_COLOR_ID_LUMA for that. But please hold on with making any changes until Pavel will express his opinion on that. > + > + /* now looping on each component and registering a corresponding > + * led > + */ > + for (i = 0; i < 4; i++) { > + led = &rgb_led->component[i]; > + if (led->color_id == -1) { > + /* the global brightness has no defined name > + * so setting it to "brightness". It also has > + * a different MAX_BRIGHTNESS value. > + * If a trigger is present, setting it on this > + * component > + */ > + led->cdev.max_brightness = > + GLOBAL_MAX_BRIGHTNESS; > + led_component_name = "brightness"; > + fwnode_property_read_string(child, > + "linux,default-trigger", > + &led->cdev.default_trigger); > + } else { > + /* using the color name defined by the framework > + * for the B, G and R components > + */ > + led->cdev.max_brightness = RGB_MAX_BRIGHTNESS; > + led_component_name = led_colors[led->color_id]; > + } > + > + /* the rest is common to all the components */ > + led->priv = priv; > + led->cdev.brightness_set_blocking = > + apa102c_brightness_set; > + /* creating our own led name to differentiate the 4 > + * components > + */ > + snprintf(led->name, sizeof(led->name), > + "%s_%s", rgb_led_name, led_component_name); > + led->cdev.name = led->name; > + LED core can do the above for you, if only you provide it with LED fwnode. > + ret = devm_led_classdev_register_ext(priv->dev, > + &led->cdev, > + NULL); There is no point in using *ext API and not passing led_init_data to it. Please pass struct led_init_data in the third argument, with initialized only its fwnode property. > + if (ret) { > + dev_err(priv->dev, "led register err: %d\n", > + ret); > + goto child_out; > + } > + } > + } > + > +child_out: > + return ret; > +} > + > +static int apa102c_probe(struct spi_device *spi) > +{ > + struct apa102c *priv; > + size_t led_count; > + int ret; > + > + led_count = device_get_child_node_count(&spi->dev); > + if (!led_count) { > + dev_err(&spi->dev, "No LEDs defined in device tree!"); > + return -ENODEV; > + } > + > + priv = devm_kzalloc(&spi->dev, > + struct_size(priv, rgb_leds, led_count), > + GFP_KERNEL); > + if (!priv) > + return -ENOMEM; > + > + priv->spi_buf = devm_kzalloc(&spi->dev, > + (led_count + 2) * sizeof(u32), > + GFP_KERNEL); > + if (!priv->spi_buf) > + return -ENOMEM; > + > + mutex_init(&priv->lock); > + priv->led_count = led_count; > + priv->dev = &spi->dev; > + priv->spi = spi; > + > + ret = apa102c_probe_dt(priv); > + if (ret) > + return ret; > + > + /* Set the LEDs with default values at start */ > + apa102c_sync(priv); > + if (ret) > + return ret; > + > + spi_set_drvdata(spi, priv); > + > + return 0; > +} > + > +static int apa102c_remove(struct spi_device *spi) > +{ > + struct apa102c *priv = spi_get_drvdata(spi); > + > + mutex_destroy(&priv->lock); > + > + return 0; > +} > + > +static const struct of_device_id apa102c_dt_ids[] = { > + { .compatible = "shiji,apa102c", }, > + {}, > +}; > + > +MODULE_DEVICE_TABLE(of, apa102c_dt_ids); > + > +static struct spi_driver apa102c_driver = { > + .probe = apa102c_probe, > + .remove = apa102c_remove, > + .driver = { > + .name = KBUILD_MODNAME, > + .of_match_table = apa102c_dt_ids, > + }, > +}; > + > +module_spi_driver(apa102c_driver); > + > +MODULE_AUTHOR("Nicolas Belin <nbelin@baylibre.com>"); > +MODULE_DESCRIPTION("apa102c LED driver"); > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("spi:apa102c"); > -- Best regards, Jacek Anaszewski ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 3/3] drivers: leds: add support for apa102c leds 2020-03-06 20:20 ` Jacek Anaszewski @ 2020-03-09 9:59 ` Nicolas Belin 0 siblings, 0 replies; 10+ messages in thread From: Nicolas Belin @ 2020-03-09 9:59 UTC (permalink / raw) To: Jacek Anaszewski Cc: linux-kernel, linux-leds, Pavel Machek, Dan Murphy, devicetree, baylibre-upstreaming Hi Jacek, Le ven. 6 mars 2020 à 21:20, Jacek Anaszewski <jacek.anaszewski@gmail.com> a écrit : > > Hi Nicolas, > > On 3/6/20 2:40 PM, Nicolas Belin wrote: > > Initilial commit in order to support the apa102c RGB leds. The > > RGB and global brightness management is done by creating 4 leds > > from the Led Framework per apa102c led. > > > > Signed-off-by: Nicolas Belin <nbelin@baylibre.com> > > --- > > drivers/leds/Kconfig | 11 ++ > > drivers/leds/Makefile | 1 + > > drivers/leds/leds-apa102c.c | 306 ++++++++++++++++++++++++++++++++++++++++++++ > > 3 files changed, 318 insertions(+) > > create mode 100644 drivers/leds/leds-apa102c.c > > > > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig > > index d82f1dea3711..28fa6c4f65cc 100644 > > --- a/drivers/leds/Kconfig > > +++ b/drivers/leds/Kconfig > > @@ -69,6 +69,17 @@ config LEDS_AN30259A > > To compile this driver as a module, choose M here: the module > > will be called leds-an30259a. > > > > +config LEDS_APA102C > > + tristate "LED Support for Shiji APA102C" > > + depends on SPI > > + depends on LEDS_CLASS > > + help > > + This option enables support for the APA102C RGB LEDs > > + from Shiji Lighting. > > + > > + To compile this driver as a module, choose M here: the module > > + will be called leds-apa102c. > > + > > config LEDS_APU > > tristate "Front panel LED support for PC Engines APU/APU2/APU3 boards" > > depends on LEDS_CLASS > > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile > > index d7e1107753fb..28dfe82900c5 100644 > > --- a/drivers/leds/Makefile > > +++ b/drivers/leds/Makefile > > @@ -88,6 +88,7 @@ obj-$(CONFIG_LEDS_LM36274) += leds-lm36274.o > > obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o > > > > # LED SPI Drivers > > +obj-$(CONFIG_LEDS_APA102C) += leds-apa102c.o > > obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o > > obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o > > obj-$(CONFIG_LEDS_EL15203000) += leds-el15203000.o > > diff --git a/drivers/leds/leds-apa102c.c b/drivers/leds/leds-apa102c.c > > new file mode 100644 > > index 000000000000..0043e7a6235b > > --- /dev/null > > +++ b/drivers/leds/leds-apa102c.c > > @@ -0,0 +1,306 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > + > > +#include <linux/leds.h> > > +#include <linux/module.h> > > +#include <linux/of_device.h> > > +#include <linux/spi/spi.h> > > +#include <uapi/linux/uleds.h> > > +#include "leds.h" > > + > > +/* > > + * Copyright (C) 2020 BayLibre, SAS > > + * Author: Nicolas Belin <nbelin@baylibre.com> > > + */ > > + > > +/* > > + * APA102C SPI protocol description: > > + * +------+----------------------------------------+------+ > > + * |START | DATA FIELD: | END | > > + * |FRAME | N LED FRAMES |FRAME | > > + * +------+------+------+------+------+-----+------+------+ > > + * | 0*32 | LED1 | LED2 | LED3 | LED4 | --- | LEDN | 1*32 | > > + * +------+------+------+------+------+-----+------+------+ > > + * > > + * +-----------------------------------+ > > + * |START FRAME 32bits | > > + * +--------+--------+--------+--------+ > > + * |00000000|00000000|00000000|00000000| > > + * +--------+--------+--------+--------+ > > + * > > + * +------------------------------------+ > > + * |LED FRAME 32bits | > > + * +---+-----+--------+--------+--------+ > > + * |111|LUMA | BLUE | GREEN | RED | > > + * +---+-----+--------+--------+--------+ > > + * |3b |5bits| 8bits | 8bits | 8bits | > > + * +---+-----+--------+--------+--------+ > > + * |MSB LSB|MSB LSB|MSB LSB|MSB LSB| > > + * +---+-----+--------+--------+--------+ > > + * > > + * +-----------------------------------+ > > + * |END FRAME 32bits | > > + * +--------+--------+--------+--------+ > > + * |11111111|11111111|11111111|11111111| > > + * +--------+--------+--------+--------+ > > + */ > > + > > +/* apa102c default settings */ > > +#define GLOBAL_MAX_BRIGHTNESS GENMASK(4, 0) > > +#define RGB_MAX_BRIGHTNESS GENMASK(7, 0) > > +#define START_BYTE 0 > > +#define END_BYTE GENMASK(7, 0) > > +#define LED_FRAME_HEADER GENMASK(7, 5) > > + > > +struct apa102c_led { > > + struct apa102c *priv; > > + char name[LED_MAX_NAME_SIZE]; > > This is not needed, LED core takes care of parsing LED name. > > > + int color_id; > > + struct led_classdev cdev; > > +}; > > + > > +struct apa102c_rgbled { > > + /* the 4 components of the apa102c rgb led: > > + * global brightness, blue, green and red in that order > > + */ > > + struct apa102c_led component[4]; > > +}; > > + > > +struct apa102c { > > + size_t led_count; > > + struct device *dev; > > + struct mutex lock; > > + struct spi_device *spi; > > + u8 *spi_buf; > > + struct apa102c_rgbled rgb_leds[]; > > +}; > > + > > +static int apa102c_sync(struct apa102c *priv) > > +{ > > + int ret; > > + size_t i; > > + struct apa102c_rgbled *leds = priv->rgb_leds; > > + u8 *buf = priv->spi_buf; > > + > > + /* creating the data that will be sent to all the leds at once */ > > + for (i = 0; i < 4; i++) > > + *buf++ = START_BYTE; > > + > > + /* looping on each RGB led component, getting the global brightness > > + * then B, G and R values > > + */ > > + for (i = 0; i < priv->led_count; i++) { > > + *buf++ = LED_FRAME_HEADER | > > + leds[i].component[0].cdev.brightness; > > + *buf++ = leds[i].component[1].cdev.brightness; > > + *buf++ = leds[i].component[2].cdev.brightness; > > + *buf++ = leds[i].component[3].cdev.brightness; > > + } > > The problem is that in the monochrome LED approach (i.e. the only > available one) you have to alter the state of only one LED - that > on behalf of which the call is made. > > And anyway, you're doing here much too much, taking into account > that this function is called from brightness_set op. > > Isn't it possible to update only one LED ? No, it is not possible. When one LED is updated and as all the leds are cascaded, the values for all the leds have to be sent using spi. However, what I can do is not updating the full buffer and simply the part that corresponds to the modified LED. > > > + > > + for (i = 0; i < 4; i++) > > + *buf++ = END_BYTE; > > + > > + ret = spi_write(priv->spi, priv->spi_buf, > > + (priv->led_count + 2) * sizeof(u32)); > > + > > + return ret; > > +} > > + > > +static int apa102c_brightness_set(struct led_classdev *cdev, > > + enum led_brightness brightness) > > +{ > > + int ret; > > + struct apa102c_led *led = container_of(cdev, > > + struct apa102c_led, > > + cdev); > > + > > + mutex_lock(&led->priv->lock); > > + /* updating the brightness then synching all the leds */ > > + cdev->brightness = brightness; > > LED core handles that. Please drop this assignment. OK > > > + ret = apa102c_sync(led->priv); > > + mutex_unlock(&led->priv->lock); > > + > > + return ret; > > +} > > + > > +static int apa102c_probe_dt(struct apa102c *priv) > > +{ > > + int ret = 0; > > + u32 i; > > + struct apa102c_rgbled *rgb_led; > > + struct apa102c_led *led; > > + struct fwnode_handle *child; > > + const char *rgb_led_name; > > + const char *led_component_name; > > + > > + /* each node corresponds to an rgb led */ > > + device_for_each_child_node(priv->dev, child) { > > + > > + ret = fwnode_property_read_u32(child, "reg", &i); > > + if (ret) { > > + dev_err(priv->dev, "coudld not read reg %d\n", ret); > > + goto child_out; > > + } > > + > > + if (i >= priv->led_count) { > > + ret = -EINVAL; > > + dev_err(priv->dev, "reg value too big\n"); > > + goto child_out; > > + } > > + > > + rgb_led = &priv->rgb_leds[i]; > > + /* checking if this led config is already used by checking if > > + * the priv member of the global_brightness led as already > > + * been set > > + */ > > + if (rgb_led->component[0].priv) { > > + ret = -EINVAL; > > + dev_err(priv->dev, "using the same reg value twice\n"); > > + goto child_out; > > + } > > + > > + ret = fwnode_property_read_string(child, "label", > > + &rgb_led_name); > > + if (ret) { > > + ret = -EINVAL; > > + dev_err(priv->dev, "missing rgb led name\n"); > > + goto child_out; > > + } > > + > > + /* setting a color_id value for each of the 4 components of the > > + * apa102c RGB led. The first component is the global brightness > > + * of the led and thus has no color. The order of the colors > > + * after the global brightness is then blue, green and red > > + * in that order. It corresponds to the order in which the > > + * values are sent using spi > > + */ > > + rgb_led->component[0].color_id = -1; //no color > > + rgb_led->component[1].color_id = LED_COLOR_ID_BLUE; > > + rgb_led->component[2].color_id = LED_COLOR_ID_GREEN; > > + rgb_led->component[3].color_id = LED_COLOR_ID_RED; > > Each LED has to have separate DT node. We haven't had so far use case > with global brightness but I think it would be OK to add > LED_COLOR_ID_LUMA for that. But please hold on with making any changes > until Pavel will express his opinion on that. It would be nice to have LED_COLOR_ID_LUMA. However, I don't feel like it is really a color. I'll wait for Pavel's opinion. > > > + > > + /* now looping on each component and registering a corresponding > > + * led > > + */ > > + for (i = 0; i < 4; i++) { > > + led = &rgb_led->component[i]; > > + if (led->color_id == -1) { > > + /* the global brightness has no defined name > > + * so setting it to "brightness". It also has > > + * a different MAX_BRIGHTNESS value. > > + * If a trigger is present, setting it on this > > + * component > > + */ > > + led->cdev.max_brightness = > > + GLOBAL_MAX_BRIGHTNESS; > > + led_component_name = "brightness"; > > + fwnode_property_read_string(child, > > + "linux,default-trigger", > > + &led->cdev.default_trigger); > > + } else { > > + /* using the color name defined by the framework > > + * for the B, G and R components > > + */ > > + led->cdev.max_brightness = RGB_MAX_BRIGHTNESS; > > + led_component_name = led_colors[led->color_id]; > > + } > > + > > + /* the rest is common to all the components */ > > + led->priv = priv; > > + led->cdev.brightness_set_blocking = > > + apa102c_brightness_set; > > + /* creating our own led name to differentiate the 4 > > + * components > > + */ > > + snprintf(led->name, sizeof(led->name), > > + "%s_%s", rgb_led_name, led_component_name); > > + led->cdev.name = led->name; > > + > > LED core can do the above for you, if only you provide it with LED > fwnode. I was doing that to have a led_name formatted as "label_color". I am going to check for LED functions that could work for me and come back to you if find other functions that are not present. > > > + ret = devm_led_classdev_register_ext(priv->dev, > > + &led->cdev, > > + NULL); > > There is no point in using *ext API and not passing led_init_data to it. > Please pass struct led_init_data in the third argument, with initialized > only its fwnode property. > > > + if (ret) { > > + dev_err(priv->dev, "led register err: %d\n", > > + ret); > > + goto child_out; > > + } > > + } > > + } > > + > > +child_out: > > + return ret; > > +} > > + > > +static int apa102c_probe(struct spi_device *spi) > > +{ > > + struct apa102c *priv; > > + size_t led_count; > > + int ret; > > + > > + led_count = device_get_child_node_count(&spi->dev); > > + if (!led_count) { > > + dev_err(&spi->dev, "No LEDs defined in device tree!"); > > + return -ENODEV; > > + } > > + > > + priv = devm_kzalloc(&spi->dev, > > + struct_size(priv, rgb_leds, led_count), > > + GFP_KERNEL); > > + if (!priv) > > + return -ENOMEM; > > + > > + priv->spi_buf = devm_kzalloc(&spi->dev, > > + (led_count + 2) * sizeof(u32), > > + GFP_KERNEL); > > + if (!priv->spi_buf) > > + return -ENOMEM; > > + > > + mutex_init(&priv->lock); > > + priv->led_count = led_count; > > + priv->dev = &spi->dev; > > + priv->spi = spi; > > + > > + ret = apa102c_probe_dt(priv); > > + if (ret) > > + return ret; > > + > > + /* Set the LEDs with default values at start */ > > + apa102c_sync(priv); > > + if (ret) > > + return ret; > > + > > + spi_set_drvdata(spi, priv); > > + > > + return 0; > > +} > > + > > +static int apa102c_remove(struct spi_device *spi) > > +{ > > + struct apa102c *priv = spi_get_drvdata(spi); > > + > > + mutex_destroy(&priv->lock); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id apa102c_dt_ids[] = { > > + { .compatible = "shiji,apa102c", }, > > + {}, > > +}; > > + > > +MODULE_DEVICE_TABLE(of, apa102c_dt_ids); > > + > > +static struct spi_driver apa102c_driver = { > > + .probe = apa102c_probe, > > + .remove = apa102c_remove, > > + .driver = { > > + .name = KBUILD_MODNAME, > > + .of_match_table = apa102c_dt_ids, > > + }, > > +}; > > + > > +module_spi_driver(apa102c_driver); > > + > > +MODULE_AUTHOR("Nicolas Belin <nbelin@baylibre.com>"); > > +MODULE_DESCRIPTION("apa102c LED driver"); > > +MODULE_LICENSE("GPL v2"); > > +MODULE_ALIAS("spi:apa102c"); > > > > -- > Best regards, > Jacek Anaszewski Thanks, Regards, Nicolas ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v3 3/3] drivers: leds: add support for apa102c leds 2020-03-06 13:40 ` [PATCH v3 3/3] drivers: leds: add support for apa102c leds Nicolas Belin 2020-03-06 20:20 ` Jacek Anaszewski @ 2020-03-24 9:42 ` Pavel Machek 1 sibling, 0 replies; 10+ messages in thread From: Pavel Machek @ 2020-03-24 9:42 UTC (permalink / raw) To: Nicolas Belin Cc: linux-kernel, linux-leds, jacek.anaszewski, dmurphy, devicetree, baylibre-upstreaming [-- Attachment #1: Type: text/plain, Size: 930 bytes --] On Fri 2020-03-06 14:40:10, Nicolas Belin wrote: > Initilial commit in order to support the apa102c RGB leds. The Initial > RGB and global brightness management is done by creating 4 leds > from the Led Framework per apa102c led. > > + > + /* setting a color_id value for each of the 4 components of the > + * apa102c RGB led. The first component is the global brightness > + * of the led and thus has no color. The order of the colors > + * after the global brightness is then blue, green and red > + * in that order. It corresponds to the order in which the > + * values are sent using spi > + */ > + rgb_led->component[0].color_id = -1; //no color Please follow codingstyle on comment style and avoid // comments. Best regards, Pavel -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html [-- Attachment #2: Digital signature --] [-- Type: application/pgp-signature, Size: 181 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-03-24 9:42 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-03-06 13:40 [PATCH v3 0/3] leds: add support for apa102c leds Nicolas Belin 2020-03-06 13:40 ` [PATCH v3 1/3] dt-bindings: Document shiji vendor-prefix Nicolas Belin 2020-03-09 21:05 ` Rob Herring 2020-03-06 13:40 ` [PATCH v3 2/3] dt-bindings: leds: Shiji Lighting APA102C LED Nicolas Belin 2020-03-06 20:19 ` Jacek Anaszewski 2020-03-13 13:06 ` Rob Herring 2020-03-06 13:40 ` [PATCH v3 3/3] drivers: leds: add support for apa102c leds Nicolas Belin 2020-03-06 20:20 ` Jacek Anaszewski 2020-03-09 9:59 ` Nicolas Belin 2020-03-24 9:42 ` Pavel Machek
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.