[PATCH] staging: mt7621-pci: enable clock bit for each port

[PATCH] staging: mt7621-pci: enable clock bit for each port

[Sergio Paracuellos]

The clock related code concerns me from the very beginning because
there are some set ups got from legacy driver that are not documented
anywhere. According to the programming guide 0x7c is 'CPE_ROSC_SEL1'
register and 0x80 is 'CPU_CPE_CN'. I do think this set up is not needed
at all and the proper thing to do is just enable the clock bit for each
pcie port. Hence remove useless code and do the right thing which is
setting up the clock bit for each port enabled.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
---
Changes are only compile-tested.

 drivers/staging/mt7621-pci/pci-mt7621.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index 1f860c5ef588..770dabd3a70d 100644
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -45,8 +45,6 @@
 
 /* rt_sysc_membase relative registers */
 #define RALINK_CLKCFG1			0x30
-#define RALINK_PCIE_CLK_GEN		0x7c
-#define RALINK_PCIE_CLK_GEN1		0x80
 
 /* Host-PCI bridge registers */
 #define RALINK_PCI_PCICFG_ADDR		0x0000
@@ -85,10 +83,6 @@
 #define PCIE_PORT_CLK_EN(x)		BIT(24 + (x))
 #define PCIE_PORT_LINKUP		BIT(0)
 
-#define PCIE_CLK_GEN_EN			BIT(31)
-#define PCIE_CLK_GEN_DIS		0
-#define PCIE_CLK_GEN1_DIS		GENMASK(30, 24)
-#define PCIE_CLK_GEN1_EN		(BIT(27) | BIT(25))
 #define MEMORY_BASE			0x0
 #define PERST_MODE_MASK			GENMASK(11, 10)
 #define PERST_MODE_GPIO			BIT(10)
@@ -233,6 +227,11 @@ static inline bool mt7621_pcie_port_is_linkup(struct mt7621_pcie_port *port)
 	return (pcie_port_read(port, RALINK_PCI_STATUS) & PCIE_PORT_LINKUP) != 0;
 }
 
+static inline void mt7621_pcie_port_clk_enable(struct mt7621_pcie_port *port)
+{
+	rt_sysc_m32(0, PCIE_PORT_CLK_EN(port->slot), RALINK_CLKCFG1);
+}
+
 static inline void mt7621_pcie_port_clk_disable(struct mt7621_pcie_port *port)
 {
 	rt_sysc_m32(PCIE_PORT_CLK_EN(port->slot), 0, RALINK_CLKCFG1);
@@ -501,11 +500,6 @@ static void mt7621_pcie_init_ports(struct mt7621_pcie *pcie)
 		}
 	}
 
-	rt_sysc_m32(0x30, 2 << 4, SYSC_REG_SYSTEM_CONFIG1);
-	rt_sysc_m32(PCIE_CLK_GEN_EN, PCIE_CLK_GEN_DIS, RALINK_PCIE_CLK_GEN);
-	rt_sysc_m32(PCIE_CLK_GEN1_DIS, PCIE_CLK_GEN1_EN, RALINK_PCIE_CLK_GEN1);
-	rt_sysc_m32(PCIE_CLK_GEN_DIS, PCIE_CLK_GEN_EN, RALINK_PCIE_CLK_GEN);
-	msleep(50);
 	reset_control_deassert(pcie->rst);
 }
 
@@ -542,6 +536,7 @@ static void mt7621_pcie_enable_ports(struct mt7621_pcie *pcie)
 
 	list_for_each_entry(port, &pcie->ports, list) {
 		if (port->enabled) {
+			mt7621_pcie_port_clk_enable(port);
 			mt7621_pcie_enable_port(port);
 			dev_info(dev, "PCIE%d enabled\n", num_slots_enabled);
 			num_slots_enabled++;
-- 
2.25.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel