All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v6] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
@ 2020-03-03  1:15 ` Vitor Massaru Iha
  0 siblings, 0 replies; 4+ messages in thread
From: Vitor Massaru Iha @ 2020-03-03  1:15 UTC (permalink / raw)
  To: devicetree, linux-arm-kernel
  Cc: robh+dt, mark.rutland, shawnguo, s.hauer, festevam,
	marco.franchi, linux-imx, lkcamp

It was based on Google Source Code for Coral Edge TPU Mendel release:
https://coral.googlesource.com/linux-imx/

It was tested on Coral Dev Board using this command:
  sudo stress --cpu 4 --timeout 3600

Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
v2:
 * Fix underscore in property name;
 * Add pinctrl entry for gpio-fan;
 * Removes undocumented property;

v3:
 * Fix subject pattern;
 * Fix order of pinctrl entries;
 * Fix MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 flags;
 * Typo pattern (from "gpiofanp" to "gpiofangrp");
 * Fix tabs on MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 line;

v4:
 * Fix cpu_thermal order;

v5:
 * Add missing Reviewed-by;

v6:
 * Removes unneeded blank line;

BR,
Vitor
---
 .../boot/dts/freescale/imx8mq-phanbell.dts    | 63 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     |  2 +-
 2 files changed, 64 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index 3f2a489a4ad8..0ff100f3f8f0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -35,6 +35,16 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 8600 1>;
+		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_fan>;
+		status = "okay";
+	};
 };
 
 &A53_0 {
@@ -53,6 +63,53 @@
 	cpu-supply = <&buck2>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_alert0: trip0 {
+			temperature = <75000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_alert1: trip1 {
+			temperature = <80000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_crit0: trip3 {
+			temperature = <90000>;
+			hysteresis = <2000>;
+			type = "critical";
+		};
+
+		fan_toggle0: trip4 {
+			temperature = <65000>;
+			hysteresis = <10000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+			<&A53_0 0 1>; /* Exclude highest OPP */
+		};
+
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device =
+			<&A53_0 0 2>; /* Exclude two highest OPPs */
+		};
+
+		map4 {
+			trip = <&fan_toggle0>;
+			cooling-device = <&fan 0 1>;
+		};
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -254,6 +311,12 @@
 };
 
 &iomuxc {
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x16
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 6a1e83922c71..a3bb17a6b9df 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -198,7 +198,7 @@
 	};
 
 	thermal-zones {
-		cpu-thermal {
+		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
 			thermal-sensors = <&tmu 0>;
-- 
2.21.1


^ permalink raw reply related	[flat|nested] 4+ messages in thread
* [PATCH v6] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
@ 2020-03-03  1:15 ` Vitor Massaru Iha
  0 siblings, 0 replies; 4+ messages in thread
From: Vitor Massaru Iha @ 2020-03-03  1:15 UTC (permalink / raw)
  To: devicetree, linux-arm-kernel
  Cc: mark.rutland, lkcamp, shawnguo, s.hauer, robh+dt, linux-imx,
	marco.franchi, festevam

It was based on Google Source Code for Coral Edge TPU Mendel release:
https://coral.googlesource.com/linux-imx/

It was tested on Coral Dev Board using this command:
  sudo stress --cpu 4 --timeout 3600

Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
v2:
 * Fix underscore in property name;
 * Add pinctrl entry for gpio-fan;
 * Removes undocumented property;

v3:
 * Fix subject pattern;
 * Fix order of pinctrl entries;
 * Fix MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 flags;
 * Typo pattern (from "gpiofanp" to "gpiofangrp");
 * Fix tabs on MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 line;

v4:
 * Fix cpu_thermal order;

v5:
 * Add missing Reviewed-by;

v6:
 * Removes unneeded blank line;

BR,
Vitor
---
 .../boot/dts/freescale/imx8mq-phanbell.dts    | 63 +++++++++++++++++++
 arch/arm64/boot/dts/freescale/imx8mq.dtsi     |  2 +-
 2 files changed, 64 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index 3f2a489a4ad8..0ff100f3f8f0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -35,6 +35,16 @@
 		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
+
+	fan: gpio-fan {
+		compatible = "gpio-fan";
+		gpio-fan,speed-map = <0 0 8600 1>;
+		gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		#cooling-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_fan>;
+		status = "okay";
+	};
 };
 
 &A53_0 {
@@ -53,6 +63,53 @@
 	cpu-supply = <&buck2>;
 };
 
+&cpu_thermal {
+	trips {
+		cpu_alert0: trip0 {
+			temperature = <75000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_alert1: trip1 {
+			temperature = <80000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		cpu_crit0: trip3 {
+			temperature = <90000>;
+			hysteresis = <2000>;
+			type = "critical";
+		};
+
+		fan_toggle0: trip4 {
+			temperature = <65000>;
+			hysteresis = <10000>;
+			type = "active";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device =
+			<&A53_0 0 1>; /* Exclude highest OPP */
+		};
+
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device =
+			<&A53_0 0 2>; /* Exclude two highest OPPs */
+		};
+
+		map4 {
+			trip = <&fan_toggle0>;
+			cooling-device = <&fan 0 1>;
+		};
+	};
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -254,6 +311,12 @@
 };
 
 &iomuxc {
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5			0x16
+		>;
+	};
+
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL			0x4000007f
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 6a1e83922c71..a3bb17a6b9df 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -198,7 +198,7 @@
 	};
 
 	thermal-zones {
-		cpu-thermal {
+		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
 			thermal-sensors = <&tmu 0>;
-- 
2.21.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 4+ messages in thread
* Re: [PATCH v6] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
  2020-03-03  1:15 ` Vitor Massaru Iha
@ 2020-03-11  8:25   ` Shawn Guo
  -1 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2020-03-11  8:25 UTC (permalink / raw)
  To: Vitor Massaru Iha
  Cc: devicetree, linux-arm-kernel, robh+dt, mark.rutland, s.hauer,
	festevam, marco.franchi, linux-imx, lkcamp

On Mon, Mar 02, 2020 at 10:15:16PM -0300, Vitor Massaru Iha wrote:
> It was based on Google Source Code for Coral Edge TPU Mendel release:
> https://coral.googlesource.com/linux-imx/
> 
> It was tested on Coral Dev Board using this command:
>   sudo stress --cpu 4 --timeout 3600
> 
> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>

Applied, thanks.

^ permalink raw reply	[flat|nested] 4+ messages in thread
* Re: [PATCH v6] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support
@ 2020-03-11  8:25   ` Shawn Guo
  0 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2020-03-11  8:25 UTC (permalink / raw)
  To: Vitor Massaru Iha
  Cc: mark.rutland, devicetree, lkcamp, s.hauer, robh+dt, linux-imx,
	marco.franchi, festevam, linux-arm-kernel

On Mon, Mar 02, 2020 at 10:15:16PM -0300, Vitor Massaru Iha wrote:
> It was based on Google Source Code for Coral Edge TPU Mendel release:
> https://coral.googlesource.com/linux-imx/
> 
> It was tested on Coral Dev Board using this command:
>   sudo stress --cpu 4 --timeout 3600
> 
> Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
> Reviewed-by: Fabio Estevam <festevam@gmail.com>

Applied, thanks.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-03-11  8:25 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-03  1:15 [PATCH v6] arm64: dts: imx8mq-phanbell: Add gpio-fan/thermal support Vitor Massaru Iha
2020-03-03  1:15 ` Vitor Massaru Iha
2020-03-11  8:25 ` Shawn Guo
2020-03-11  8:25   ` Shawn Guo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.