All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 1/2] ath11k: add thermal cooling device support
@ 2020-02-15  0:25 ` Pradeep Kumar Chitrapu
  0 siblings, 0 replies; 6+ messages in thread
From: Pradeep Kumar Chitrapu @ 2020-02-15  0:25 UTC (permalink / raw)
  To: ath11k; +Cc: linux-wireless, Pradeep Kumar Chitrapu

Thermal cooling device support is added to control the temperature by
throttling the data transmission for the given duration. Throttling is
done by suspending all data tx queues by given percentage of time. The
thermal device allows user to configure duty cycle.

Throttling can be disabled by setting the duty cycle to 0. The cooling
device can be found under /sys/class/thermal/cooling_deviceX/.
Corresponding soft link to this device can be found under phy folder.

/sys/class/ieee80211/phy*/device/cooling_device.

To set duty cycle as 40%,

echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
v2:
 - fix warnings and rebase

 drivers/net/wireless/ath/ath11k/Makefile  |   1 +
 drivers/net/wireless/ath/ath11k/core.c    |  12 ++-
 drivers/net/wireless/ath/ath11k/core.h    |   2 +
 drivers/net/wireless/ath/ath11k/thermal.c | 145 ++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/thermal.h |  40 +++++++++
 drivers/net/wireless/ath/ath11k/wmi.c     |  64 +++++++++++++
 drivers/net/wireless/ath/ath11k/wmi.h     |  40 +++++++++
 7 files changed, 303 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/ath/ath11k/thermal.c
 create mode 100644 drivers/net/wireless/ath/ath11k/thermal.h

diff --git a/drivers/net/wireless/ath/ath11k/Makefile b/drivers/net/wireless/ath/ath11k/Makefile
index 2761d07d938e..fe7736e53583 100644
--- a/drivers/net/wireless/ath/ath11k/Makefile
+++ b/drivers/net/wireless/ath/ath11k/Makefile
@@ -20,6 +20,7 @@ ath11k-y += core.o \
 ath11k-$(CONFIG_ATH11K_DEBUGFS) += debug_htt_stats.o debugfs_sta.o
 ath11k-$(CONFIG_NL80211_TESTMODE) += testmode.o
 ath11k-$(CONFIG_ATH11K_TRACING) += trace.o
+ath11k-$(CONFIG_THERMAL) += thermal.o
 
 # for tracing framework to find trace.h
 CFLAGS_trace.o := -I$(src)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 6a30601a12e8..abfd451dead2 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -392,11 +392,19 @@ static int ath11k_core_pdev_create(struct ath11k_base *ab)
 		goto err_mac_unregister;
 	}
 
+	ret = ath11k_thermal_register(ab);
+	if (ret) {
+		ath11k_err(ab, "could not register thermal device: %d\n",
+			   ret);
+		goto err_dp_pdev_free;
+	}
+
 	return 0;
 
+err_dp_pdev_free:
+	ath11k_dp_pdev_free(ab);
 err_mac_unregister:
 	ath11k_mac_unregister(ab);
-
 err_pdev_debug:
 	ath11k_debug_pdev_destroy(ab);
 
@@ -405,6 +413,7 @@ static int ath11k_core_pdev_create(struct ath11k_base *ab)
 
 static void ath11k_core_pdev_destroy(struct ath11k_base *ab)
 {
+	ath11k_thermal_unregister(ab);
 	ath11k_mac_unregister(ab);
 	ath11k_ahb_ext_irq_disable(ab);
 	ath11k_dp_pdev_free(ab);
@@ -569,6 +578,7 @@ static int ath11k_core_reconfigure_on_crash(struct ath11k_base *ab)
 	int ret;
 
 	mutex_lock(&ab->core_lock);
+	ath11k_thermal_unregister(ab);
 	ath11k_ahb_ext_irq_disable(ab);
 	ath11k_dp_pdev_free(ab);
 	ath11k_ahb_stop(ab);
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index 01cb64cfe0d0..5c767d87c174 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -20,6 +20,7 @@
 #include "hw.h"
 #include "hal_rx.h"
 #include "reg.h"
+#include "thermal.h"
 
 #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
 
@@ -526,6 +527,7 @@ struct ath11k {
 	struct ath11k_debug debug;
 #endif
 	bool dfs_block_radar_events;
+	struct ath11k_thermal thermal;
 };
 
 struct ath11k_band_cap {
diff --git a/drivers/net/wireless/ath/ath11k/thermal.c b/drivers/net/wireless/ath/ath11k/thermal.c
new file mode 100644
index 000000000000..6c2d96be34cb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath11k/thermal.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: BSD-3-Clause-Clear
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+#include "core.h"
+#include "debug.h"
+
+static int
+ath11k_thermal_get_max_throttle_state(struct thermal_cooling_device *cdev,
+				      unsigned long *state)
+{
+	*state = ATH11K_THERMAL_THROTTLE_MAX;
+
+	return 0;
+}
+
+static int
+ath11k_thermal_get_cur_throttle_state(struct thermal_cooling_device *cdev,
+				      unsigned long *state)
+{
+	struct ath11k *ar = cdev->devdata;
+
+	mutex_lock(&ar->conf_mutex);
+	*state = ar->thermal.throttle_state;
+	mutex_unlock(&ar->conf_mutex);
+
+	return 0;
+}
+
+static int
+ath11k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev,
+				      unsigned long throttle_state)
+{
+	struct ath11k *ar = cdev->devdata;
+	int ret;
+
+	if (throttle_state > ATH11K_THERMAL_THROTTLE_MAX) {
+		ath11k_warn(ar->ab, "throttle state %ld is exceeding the limit %d\n",
+			    throttle_state, ATH11K_THERMAL_THROTTLE_MAX);
+		return -EINVAL;
+	}
+	mutex_lock(&ar->conf_mutex);
+	ret = ath11k_thermal_set_throttling(ar, throttle_state);
+	if (ret == 0)
+		ar->thermal.throttle_state = throttle_state;
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static struct thermal_cooling_device_ops ath11k_thermal_ops = {
+	.get_max_state = ath11k_thermal_get_max_throttle_state,
+	.get_cur_state = ath11k_thermal_get_cur_throttle_state,
+	.set_cur_state = ath11k_thermal_set_cur_throttle_state,
+};
+
+int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state)
+{
+	struct ath11k_base *sc = ar->ab;
+	struct thermal_mitigation_params param;
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (ar->state != ATH11K_STATE_ON)
+		return 0;
+
+	memset(&param, 0, sizeof(param));
+	param.pdev_id = ar->pdev->pdev_id;
+	param.enable = throttle_state ? 1 : 0;
+	param.dc = ATH11K_THERMAL_DEFAULT_DUTY_CYCLE;
+	param.dc_per_event = 0xFFFFFFFF;
+
+	param.levelconf[0].tmplwm = ATH11K_THERMAL_TEMP_LOW_MARK;
+	param.levelconf[0].tmphwm = ATH11K_THERMAL_TEMP_HIGH_MARK;
+	param.levelconf[0].dcoffpercent = throttle_state;
+	param.levelconf[0].priority = 0; /* disable all data tx queues */
+
+	ret = ath11k_wmi_send_thermal_mitigation_param_cmd(ar, &param);
+	if (ret) {
+		ath11k_warn(sc, "failed to send thermal mitigation duty cycle %u ret %d\n",
+			    throttle_state, ret);
+	}
+
+	return ret;
+}
+
+int ath11k_thermal_register(struct ath11k_base *sc)
+{
+	struct thermal_cooling_device *cdev;
+	struct ath11k *ar;
+	struct ath11k_pdev *pdev;
+	int i, ret;
+
+	for (i = 0; i < sc->num_radios; i++) {
+		pdev = &sc->pdevs[i];
+		ar = pdev->ar;
+		if (!ar)
+			continue;
+
+		cdev = thermal_cooling_device_register("ath11k_thermal", ar,
+						       &ath11k_thermal_ops);
+
+		if (IS_ERR(cdev)) {
+			ath11k_err(sc, "failed to setup thermal device result: %ld\n",
+				   PTR_ERR(cdev));
+			return -EINVAL;
+		}
+
+		ret = sysfs_create_link(&ar->hw->wiphy->dev.kobj, &cdev->device.kobj,
+					"cooling_device");
+		if (ret) {
+			ath11k_err(sc, "failed to create cooling device symlink\n");
+			goto err_thermal_destroy;
+		}
+
+		ar->thermal.cdev = cdev;
+	}
+
+	return 0;
+
+err_thermal_destroy:
+	ath11k_thermal_unregister(sc);
+	return ret;
+}
+
+void ath11k_thermal_unregister(struct ath11k_base *sc)
+{
+	struct ath11k *ar;
+	struct ath11k_pdev *pdev;
+	int i;
+
+	for (i = 0; i < sc->num_radios; i++) {
+		pdev = &sc->pdevs[i];
+		ar = pdev->ar;
+		if (!ar)
+			continue;
+
+		sysfs_remove_link(&ar->hw->wiphy->dev.kobj, "cooling_device");
+		thermal_cooling_device_unregister(ar->thermal.cdev);
+	}
+}
diff --git a/drivers/net/wireless/ath/ath11k/thermal.h b/drivers/net/wireless/ath/ath11k/thermal.h
new file mode 100644
index 000000000000..95a34803b60e
--- /dev/null
+++ b/drivers/net/wireless/ath/ath11k/thermal.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: BSD-3-Clause-Clear */
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _ATH11K_THERMAL_
+#define _ATH11K_THERMAL_
+
+#define ATH11K_THERMAL_TEMP_LOW_MARK -100
+#define ATH11K_THERMAL_TEMP_HIGH_MARK 150
+#define ATH11K_THERMAL_THROTTLE_MAX     100
+#define ATH11K_THERMAL_DEFAULT_DUTY_CYCLE 100
+
+struct ath11k_thermal {
+	struct thermal_cooling_device *cdev;
+
+	/* protected by conf_mutex */
+	u32 throttle_state;
+};
+
+#if IS_REACHABLE(CONFIG_THERMAL)
+int ath11k_thermal_register(struct ath11k_base *sc);
+void ath11k_thermal_unregister(struct ath11k_base *sc);
+int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state);
+#else
+static inline int ath11k_thermal_register(struct ath11k_base *sc)
+{
+	return 0;
+}
+
+static inline void ath11k_thermal_unregister(struct ath11k *ar)
+{
+}
+
+static inline int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state)
+{
+}
+
+#endif
+#endif /* _ATH11K_THERMAL_ */
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 9cbe038da1f6..31b625a4192f 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -2442,6 +2442,70 @@ int ath11k_wmi_pdev_peer_pktlog_filter(struct ath11k *ar, u8 *addr, u8 enable)
 	return ret;
 }
 
+int
+ath11k_wmi_send_thermal_mitigation_param_cmd(struct ath11k *ar,
+					     struct thermal_mitigation_params *param)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct wmi_therm_throt_config_request_cmd *cmd;
+	struct wmi_therm_throt_level_config_info *lvl_conf;
+	struct wmi_tlv *tlv;
+	struct sk_buff *skb;
+	int i, ret, len;
+
+	len = sizeof(*cmd) + TLV_HDR_SIZE +
+	      THERMAL_LEVELS * sizeof(struct wmi_therm_throt_level_config_info);
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, len);
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_therm_throt_config_request_cmd *)skb->data;
+
+	cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_THERM_THROT_CONFIG_REQUEST) |
+			  FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+
+	cmd->pdev_id = ar->pdev->pdev_id;
+	cmd->enable = param->enable;
+	cmd->dc = param->dc;
+	cmd->dc_per_event = param->dc_per_event;
+	cmd->therm_throt_levels = THERMAL_LEVELS;
+
+	tlv = (struct wmi_tlv *)(skb->data + sizeof(*cmd));
+	tlv->header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ARRAY_STRUCT) |
+		      FIELD_PREP(WMI_TLV_LEN,
+				 (THERMAL_LEVELS *
+				  sizeof(struct wmi_therm_throt_level_config_info)));
+
+	lvl_conf = (struct wmi_therm_throt_level_config_info *)(skb->data +
+								sizeof(*cmd) +
+								TLV_HDR_SIZE);
+	for (i = 0; i < THERMAL_LEVELS; i++) {
+		lvl_conf->tlv_header =
+			FIELD_PREP(WMI_TLV_TAG, WMI_TAG_THERM_THROT_LEVEL_CONFIG_INFO) |
+			FIELD_PREP(WMI_TLV_LEN, sizeof(*lvl_conf) - TLV_HDR_SIZE);
+
+		lvl_conf->temp_lwm = param->levelconf[i].tmplwm;
+		lvl_conf->temp_hwm = param->levelconf[i].tmphwm;
+		lvl_conf->dc_off_percent = param->levelconf[i].dcoffpercent;
+		lvl_conf->prio = param->levelconf[i].priority;
+		lvl_conf++;
+	}
+
+	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_THERM_THROT_SET_CONF_CMDID);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to send THERM_THROT_SET_CONF cmd\n");
+		dev_kfree_skb(skb);
+	}
+
+	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
+		   "WMI vdev set thermal throt pdev_id %d enable %d dc %d dc_per_event %x levels %d\n",
+		   ar->pdev->pdev_id, param->enable, param->dc,
+		   param->dc_per_event, THERMAL_LEVELS);
+
+	return ret;
+}
+
 int ath11k_wmi_pdev_pktlog_enable(struct ath11k *ar, u32 pktlog_filter)
 {
 	struct ath11k_pdev_wmi *wmi = ar->wmi;
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 1fde15c762ad..c8aa4cbb9a49 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -442,6 +442,10 @@ enum wmi_tlv_cmd_id {
 	WMI_DBGLOG_TIME_STAMP_SYNC_CMDID,
 	WMI_SET_MULTIPLE_MCAST_FILTER_CMDID,
 	WMI_READ_DATA_FROM_FLASH_CMDID,
+	WMI_THERM_THROT_SET_CONF_CMDID,
+	WMI_RUNTIME_DPD_RECAL_CMDID,
+	WMI_GET_TPC_POWER_CMDID,
+	WMI_IDLE_TRIGGER_MONITOR_CMDID,
 	WMI_GPIO_CONFIG_CMDID = WMI_TLV_CMD(WMI_GRP_GPIO),
 	WMI_GPIO_OUTPUT_CMDID,
 	WMI_TXBF_CMDID,
@@ -3605,6 +3609,39 @@ struct wmi_init_country_cmd {
 	} cc_info;
 } __packed;
 
+#define THERMAL_LEVELS  1
+struct tt_level_config {
+	u32 tmplwm;
+	u32 tmphwm;
+	u32 dcoffpercent;
+	u32 priority;
+};
+
+struct thermal_mitigation_params {
+	u32 pdev_id;
+	u32 enable;
+	u32 dc;
+	u32 dc_per_event;
+	struct tt_level_config levelconf[THERMAL_LEVELS];
+};
+
+struct wmi_therm_throt_config_request_cmd {
+	u32 tlv_header;
+	u32 pdev_id;
+	u32 enable;
+	u32 dc;
+	u32 dc_per_event;
+	u32 therm_throt_levels;
+} __packed;
+
+struct wmi_therm_throt_level_config_info {
+	u32 tlv_header;
+	u32 temp_lwm;
+	u32 temp_hwm;
+	u32 dc_off_percent;
+	u32 prio;
+} __packed;
+
 struct wmi_pdev_pktlog_filter_info {
 	u32 tlv_header;
 	struct wmi_mac_addr peer_macaddr;
@@ -4740,6 +4777,9 @@ int ath11k_wmi_send_bcn_offload_control_cmd(struct ath11k *ar,
 int
 ath11k_wmi_send_init_country_cmd(struct ath11k *ar,
 				 struct wmi_init_country_params init_cc_param);
+int
+ath11k_wmi_send_thermal_mitigation_param_cmd(struct ath11k *ar,
+					     struct thermal_mitigation_params *param);
 int ath11k_wmi_pdev_pktlog_enable(struct ath11k *ar, u32 pktlog_filter);
 int ath11k_wmi_pdev_pktlog_disable(struct ath11k *ar);
 int ath11k_wmi_pdev_peer_pktlog_filter(struct ath11k *ar, u8 *addr, u8 enable);
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v2 1/2] ath11k: add thermal cooling device support
@ 2020-02-15  0:25 ` Pradeep Kumar Chitrapu
  0 siblings, 0 replies; 6+ messages in thread
From: Pradeep Kumar Chitrapu @ 2020-02-15  0:25 UTC (permalink / raw)
  To: ath11k; +Cc: Pradeep Kumar Chitrapu, linux-wireless

Thermal cooling device support is added to control the temperature by
throttling the data transmission for the given duration. Throttling is
done by suspending all data tx queues by given percentage of time. The
thermal device allows user to configure duty cycle.

Throttling can be disabled by setting the duty cycle to 0. The cooling
device can be found under /sys/class/thermal/cooling_deviceX/.
Corresponding soft link to this device can be found under phy folder.

/sys/class/ieee80211/phy*/device/cooling_device.

To set duty cycle as 40%,

echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
v2:
 - fix warnings and rebase

 drivers/net/wireless/ath/ath11k/Makefile  |   1 +
 drivers/net/wireless/ath/ath11k/core.c    |  12 ++-
 drivers/net/wireless/ath/ath11k/core.h    |   2 +
 drivers/net/wireless/ath/ath11k/thermal.c | 145 ++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/thermal.h |  40 +++++++++
 drivers/net/wireless/ath/ath11k/wmi.c     |  64 +++++++++++++
 drivers/net/wireless/ath/ath11k/wmi.h     |  40 +++++++++
 7 files changed, 303 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/ath/ath11k/thermal.c
 create mode 100644 drivers/net/wireless/ath/ath11k/thermal.h

diff --git a/drivers/net/wireless/ath/ath11k/Makefile b/drivers/net/wireless/ath/ath11k/Makefile
index 2761d07d938e..fe7736e53583 100644
--- a/drivers/net/wireless/ath/ath11k/Makefile
+++ b/drivers/net/wireless/ath/ath11k/Makefile
@@ -20,6 +20,7 @@ ath11k-y += core.o \
 ath11k-$(CONFIG_ATH11K_DEBUGFS) += debug_htt_stats.o debugfs_sta.o
 ath11k-$(CONFIG_NL80211_TESTMODE) += testmode.o
 ath11k-$(CONFIG_ATH11K_TRACING) += trace.o
+ath11k-$(CONFIG_THERMAL) += thermal.o
 
 # for tracing framework to find trace.h
 CFLAGS_trace.o := -I$(src)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 6a30601a12e8..abfd451dead2 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -392,11 +392,19 @@ static int ath11k_core_pdev_create(struct ath11k_base *ab)
 		goto err_mac_unregister;
 	}
 
+	ret = ath11k_thermal_register(ab);
+	if (ret) {
+		ath11k_err(ab, "could not register thermal device: %d\n",
+			   ret);
+		goto err_dp_pdev_free;
+	}
+
 	return 0;
 
+err_dp_pdev_free:
+	ath11k_dp_pdev_free(ab);
 err_mac_unregister:
 	ath11k_mac_unregister(ab);
-
 err_pdev_debug:
 	ath11k_debug_pdev_destroy(ab);
 
@@ -405,6 +413,7 @@ static int ath11k_core_pdev_create(struct ath11k_base *ab)
 
 static void ath11k_core_pdev_destroy(struct ath11k_base *ab)
 {
+	ath11k_thermal_unregister(ab);
 	ath11k_mac_unregister(ab);
 	ath11k_ahb_ext_irq_disable(ab);
 	ath11k_dp_pdev_free(ab);
@@ -569,6 +578,7 @@ static int ath11k_core_reconfigure_on_crash(struct ath11k_base *ab)
 	int ret;
 
 	mutex_lock(&ab->core_lock);
+	ath11k_thermal_unregister(ab);
 	ath11k_ahb_ext_irq_disable(ab);
 	ath11k_dp_pdev_free(ab);
 	ath11k_ahb_stop(ab);
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index 01cb64cfe0d0..5c767d87c174 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -20,6 +20,7 @@
 #include "hw.h"
 #include "hal_rx.h"
 #include "reg.h"
+#include "thermal.h"
 
 #define SM(_v, _f) (((_v) << _f##_LSB) & _f##_MASK)
 
@@ -526,6 +527,7 @@ struct ath11k {
 	struct ath11k_debug debug;
 #endif
 	bool dfs_block_radar_events;
+	struct ath11k_thermal thermal;
 };
 
 struct ath11k_band_cap {
diff --git a/drivers/net/wireless/ath/ath11k/thermal.c b/drivers/net/wireless/ath/ath11k/thermal.c
new file mode 100644
index 000000000000..6c2d96be34cb
--- /dev/null
+++ b/drivers/net/wireless/ath/ath11k/thermal.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: BSD-3-Clause-Clear
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+#include "core.h"
+#include "debug.h"
+
+static int
+ath11k_thermal_get_max_throttle_state(struct thermal_cooling_device *cdev,
+				      unsigned long *state)
+{
+	*state = ATH11K_THERMAL_THROTTLE_MAX;
+
+	return 0;
+}
+
+static int
+ath11k_thermal_get_cur_throttle_state(struct thermal_cooling_device *cdev,
+				      unsigned long *state)
+{
+	struct ath11k *ar = cdev->devdata;
+
+	mutex_lock(&ar->conf_mutex);
+	*state = ar->thermal.throttle_state;
+	mutex_unlock(&ar->conf_mutex);
+
+	return 0;
+}
+
+static int
+ath11k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev,
+				      unsigned long throttle_state)
+{
+	struct ath11k *ar = cdev->devdata;
+	int ret;
+
+	if (throttle_state > ATH11K_THERMAL_THROTTLE_MAX) {
+		ath11k_warn(ar->ab, "throttle state %ld is exceeding the limit %d\n",
+			    throttle_state, ATH11K_THERMAL_THROTTLE_MAX);
+		return -EINVAL;
+	}
+	mutex_lock(&ar->conf_mutex);
+	ret = ath11k_thermal_set_throttling(ar, throttle_state);
+	if (ret == 0)
+		ar->thermal.throttle_state = throttle_state;
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+static struct thermal_cooling_device_ops ath11k_thermal_ops = {
+	.get_max_state = ath11k_thermal_get_max_throttle_state,
+	.get_cur_state = ath11k_thermal_get_cur_throttle_state,
+	.set_cur_state = ath11k_thermal_set_cur_throttle_state,
+};
+
+int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state)
+{
+	struct ath11k_base *sc = ar->ab;
+	struct thermal_mitigation_params param;
+	int ret = 0;
+
+	lockdep_assert_held(&ar->conf_mutex);
+
+	if (ar->state != ATH11K_STATE_ON)
+		return 0;
+
+	memset(&param, 0, sizeof(param));
+	param.pdev_id = ar->pdev->pdev_id;
+	param.enable = throttle_state ? 1 : 0;
+	param.dc = ATH11K_THERMAL_DEFAULT_DUTY_CYCLE;
+	param.dc_per_event = 0xFFFFFFFF;
+
+	param.levelconf[0].tmplwm = ATH11K_THERMAL_TEMP_LOW_MARK;
+	param.levelconf[0].tmphwm = ATH11K_THERMAL_TEMP_HIGH_MARK;
+	param.levelconf[0].dcoffpercent = throttle_state;
+	param.levelconf[0].priority = 0; /* disable all data tx queues */
+
+	ret = ath11k_wmi_send_thermal_mitigation_param_cmd(ar, &param);
+	if (ret) {
+		ath11k_warn(sc, "failed to send thermal mitigation duty cycle %u ret %d\n",
+			    throttle_state, ret);
+	}
+
+	return ret;
+}
+
+int ath11k_thermal_register(struct ath11k_base *sc)
+{
+	struct thermal_cooling_device *cdev;
+	struct ath11k *ar;
+	struct ath11k_pdev *pdev;
+	int i, ret;
+
+	for (i = 0; i < sc->num_radios; i++) {
+		pdev = &sc->pdevs[i];
+		ar = pdev->ar;
+		if (!ar)
+			continue;
+
+		cdev = thermal_cooling_device_register("ath11k_thermal", ar,
+						       &ath11k_thermal_ops);
+
+		if (IS_ERR(cdev)) {
+			ath11k_err(sc, "failed to setup thermal device result: %ld\n",
+				   PTR_ERR(cdev));
+			return -EINVAL;
+		}
+
+		ret = sysfs_create_link(&ar->hw->wiphy->dev.kobj, &cdev->device.kobj,
+					"cooling_device");
+		if (ret) {
+			ath11k_err(sc, "failed to create cooling device symlink\n");
+			goto err_thermal_destroy;
+		}
+
+		ar->thermal.cdev = cdev;
+	}
+
+	return 0;
+
+err_thermal_destroy:
+	ath11k_thermal_unregister(sc);
+	return ret;
+}
+
+void ath11k_thermal_unregister(struct ath11k_base *sc)
+{
+	struct ath11k *ar;
+	struct ath11k_pdev *pdev;
+	int i;
+
+	for (i = 0; i < sc->num_radios; i++) {
+		pdev = &sc->pdevs[i];
+		ar = pdev->ar;
+		if (!ar)
+			continue;
+
+		sysfs_remove_link(&ar->hw->wiphy->dev.kobj, "cooling_device");
+		thermal_cooling_device_unregister(ar->thermal.cdev);
+	}
+}
diff --git a/drivers/net/wireless/ath/ath11k/thermal.h b/drivers/net/wireless/ath/ath11k/thermal.h
new file mode 100644
index 000000000000..95a34803b60e
--- /dev/null
+++ b/drivers/net/wireless/ath/ath11k/thermal.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: BSD-3-Clause-Clear */
+/*
+ * Copyright (c) 2020 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _ATH11K_THERMAL_
+#define _ATH11K_THERMAL_
+
+#define ATH11K_THERMAL_TEMP_LOW_MARK -100
+#define ATH11K_THERMAL_TEMP_HIGH_MARK 150
+#define ATH11K_THERMAL_THROTTLE_MAX     100
+#define ATH11K_THERMAL_DEFAULT_DUTY_CYCLE 100
+
+struct ath11k_thermal {
+	struct thermal_cooling_device *cdev;
+
+	/* protected by conf_mutex */
+	u32 throttle_state;
+};
+
+#if IS_REACHABLE(CONFIG_THERMAL)
+int ath11k_thermal_register(struct ath11k_base *sc);
+void ath11k_thermal_unregister(struct ath11k_base *sc);
+int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state);
+#else
+static inline int ath11k_thermal_register(struct ath11k_base *sc)
+{
+	return 0;
+}
+
+static inline void ath11k_thermal_unregister(struct ath11k *ar)
+{
+}
+
+static inline int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state)
+{
+}
+
+#endif
+#endif /* _ATH11K_THERMAL_ */
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 9cbe038da1f6..31b625a4192f 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -2442,6 +2442,70 @@ int ath11k_wmi_pdev_peer_pktlog_filter(struct ath11k *ar, u8 *addr, u8 enable)
 	return ret;
 }
 
+int
+ath11k_wmi_send_thermal_mitigation_param_cmd(struct ath11k *ar,
+					     struct thermal_mitigation_params *param)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct wmi_therm_throt_config_request_cmd *cmd;
+	struct wmi_therm_throt_level_config_info *lvl_conf;
+	struct wmi_tlv *tlv;
+	struct sk_buff *skb;
+	int i, ret, len;
+
+	len = sizeof(*cmd) + TLV_HDR_SIZE +
+	      THERMAL_LEVELS * sizeof(struct wmi_therm_throt_level_config_info);
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, len);
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_therm_throt_config_request_cmd *)skb->data;
+
+	cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_THERM_THROT_CONFIG_REQUEST) |
+			  FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+
+	cmd->pdev_id = ar->pdev->pdev_id;
+	cmd->enable = param->enable;
+	cmd->dc = param->dc;
+	cmd->dc_per_event = param->dc_per_event;
+	cmd->therm_throt_levels = THERMAL_LEVELS;
+
+	tlv = (struct wmi_tlv *)(skb->data + sizeof(*cmd));
+	tlv->header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ARRAY_STRUCT) |
+		      FIELD_PREP(WMI_TLV_LEN,
+				 (THERMAL_LEVELS *
+				  sizeof(struct wmi_therm_throt_level_config_info)));
+
+	lvl_conf = (struct wmi_therm_throt_level_config_info *)(skb->data +
+								sizeof(*cmd) +
+								TLV_HDR_SIZE);
+	for (i = 0; i < THERMAL_LEVELS; i++) {
+		lvl_conf->tlv_header =
+			FIELD_PREP(WMI_TLV_TAG, WMI_TAG_THERM_THROT_LEVEL_CONFIG_INFO) |
+			FIELD_PREP(WMI_TLV_LEN, sizeof(*lvl_conf) - TLV_HDR_SIZE);
+
+		lvl_conf->temp_lwm = param->levelconf[i].tmplwm;
+		lvl_conf->temp_hwm = param->levelconf[i].tmphwm;
+		lvl_conf->dc_off_percent = param->levelconf[i].dcoffpercent;
+		lvl_conf->prio = param->levelconf[i].priority;
+		lvl_conf++;
+	}
+
+	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_THERM_THROT_SET_CONF_CMDID);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to send THERM_THROT_SET_CONF cmd\n");
+		dev_kfree_skb(skb);
+	}
+
+	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
+		   "WMI vdev set thermal throt pdev_id %d enable %d dc %d dc_per_event %x levels %d\n",
+		   ar->pdev->pdev_id, param->enable, param->dc,
+		   param->dc_per_event, THERMAL_LEVELS);
+
+	return ret;
+}
+
 int ath11k_wmi_pdev_pktlog_enable(struct ath11k *ar, u32 pktlog_filter)
 {
 	struct ath11k_pdev_wmi *wmi = ar->wmi;
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 1fde15c762ad..c8aa4cbb9a49 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -442,6 +442,10 @@ enum wmi_tlv_cmd_id {
 	WMI_DBGLOG_TIME_STAMP_SYNC_CMDID,
 	WMI_SET_MULTIPLE_MCAST_FILTER_CMDID,
 	WMI_READ_DATA_FROM_FLASH_CMDID,
+	WMI_THERM_THROT_SET_CONF_CMDID,
+	WMI_RUNTIME_DPD_RECAL_CMDID,
+	WMI_GET_TPC_POWER_CMDID,
+	WMI_IDLE_TRIGGER_MONITOR_CMDID,
 	WMI_GPIO_CONFIG_CMDID = WMI_TLV_CMD(WMI_GRP_GPIO),
 	WMI_GPIO_OUTPUT_CMDID,
 	WMI_TXBF_CMDID,
@@ -3605,6 +3609,39 @@ struct wmi_init_country_cmd {
 	} cc_info;
 } __packed;
 
+#define THERMAL_LEVELS  1
+struct tt_level_config {
+	u32 tmplwm;
+	u32 tmphwm;
+	u32 dcoffpercent;
+	u32 priority;
+};
+
+struct thermal_mitigation_params {
+	u32 pdev_id;
+	u32 enable;
+	u32 dc;
+	u32 dc_per_event;
+	struct tt_level_config levelconf[THERMAL_LEVELS];
+};
+
+struct wmi_therm_throt_config_request_cmd {
+	u32 tlv_header;
+	u32 pdev_id;
+	u32 enable;
+	u32 dc;
+	u32 dc_per_event;
+	u32 therm_throt_levels;
+} __packed;
+
+struct wmi_therm_throt_level_config_info {
+	u32 tlv_header;
+	u32 temp_lwm;
+	u32 temp_hwm;
+	u32 dc_off_percent;
+	u32 prio;
+} __packed;
+
 struct wmi_pdev_pktlog_filter_info {
 	u32 tlv_header;
 	struct wmi_mac_addr peer_macaddr;
@@ -4740,6 +4777,9 @@ int ath11k_wmi_send_bcn_offload_control_cmd(struct ath11k *ar,
 int
 ath11k_wmi_send_init_country_cmd(struct ath11k *ar,
 				 struct wmi_init_country_params init_cc_param);
+int
+ath11k_wmi_send_thermal_mitigation_param_cmd(struct ath11k *ar,
+					     struct thermal_mitigation_params *param);
 int ath11k_wmi_pdev_pktlog_enable(struct ath11k *ar, u32 pktlog_filter);
 int ath11k_wmi_pdev_pktlog_disable(struct ath11k *ar);
 int ath11k_wmi_pdev_peer_pktlog_filter(struct ath11k *ar, u8 *addr, u8 enable);
-- 
1.9.1

_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v2 2/2] ath11k: add thermal sensor device support
  2020-02-15  0:25 ` Pradeep Kumar Chitrapu
@ 2020-02-15  0:25   ` Pradeep Kumar Chitrapu
  -1 siblings, 0 replies; 6+ messages in thread
From: Pradeep Kumar Chitrapu @ 2020-02-15  0:25 UTC (permalink / raw)
  To: ath11k; +Cc: linux-wireless, Pradeep Kumar Chitrapu

Temperature sensor generates electrical analog voltage from temperature
of each chain. The analog voltage is converted to digital value through
ADC. For reading temperature values fom user space, hw monitoring device
is used.

Whenever the user requests for current temperature, the driver sends WMI
command and wait for response. For reading temperature,

cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
v2:
 - fix warnings and rebase

 drivers/net/wireless/ath/ath11k/core.c    |  1 +
 drivers/net/wireless/ath/ath11k/mac.c     |  2 +
 drivers/net/wireless/ath/ath11k/thermal.c | 79 ++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/thermal.h | 13 +++++
 drivers/net/wireless/ath/ath11k/wmi.c     | 80 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/wmi.h     | 13 +++++
 6 files changed, 188 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index abfd451dead2..bf5657d2ae18 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -655,6 +655,7 @@ static void ath11k_core_restart(struct work_struct *work)
 		complete(&ar->install_key_done);
 		complete(&ar->vdev_setup_done);
 		complete(&ar->bss_survey_done);
+		complete(&ar->thermal.wmi_sync);
 
 		wake_up(&ar->dp.tx_empty_waitq);
 		idr_for_each(&ar->txmgmt_idr,
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index f5e171c26bd5..e28f5a348be6 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5905,6 +5905,8 @@ int ath11k_mac_allocate(struct ath11k_base *ab)
 		init_completion(&ar->bss_survey_done);
 		init_completion(&ar->scan.started);
 		init_completion(&ar->scan.completed);
+		init_completion(&ar->thermal.wmi_sync);
+
 		INIT_DELAYED_WORK(&ar->scan.timeout, ath11k_scan_timeout_work);
 		INIT_WORK(&ar->regd_update_work, ath11k_regd_update_work);
 
diff --git a/drivers/net/wireless/ath/ath11k/thermal.c b/drivers/net/wireless/ath/ath11k/thermal.c
index 6c2d96be34cb..259dddbda2c7 100644
--- a/drivers/net/wireless/ath/ath11k/thermal.c
+++ b/drivers/net/wireless/ath/ath11k/thermal.c
@@ -6,6 +6,8 @@
 #include <linux/device.h>
 #include <linux/sysfs.h>
 #include <linux/thermal.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
 #include "core.h"
 #include "debug.h"
 
@@ -57,6 +59,70 @@
 	.set_cur_state = ath11k_thermal_set_cur_throttle_state,
 };
 
+static ssize_t ath11k_thermal_show_temp(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct ath11k *ar = dev_get_drvdata(dev);
+	int ret, temperature;
+	unsigned long time_left;
+
+	mutex_lock(&ar->conf_mutex);
+
+	/* Can't get temperature when the card is off */
+	if (ar->state != ATH11K_STATE_ON) {
+		ret = -ENETDOWN;
+		goto out;
+	}
+
+	reinit_completion(&ar->thermal.wmi_sync);
+	ret = ath11k_wmi_send_pdev_temperature_cmd(ar);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to read temperature %d\n", ret);
+		goto out;
+	}
+
+	if (test_bit(ATH11K_FLAG_CRASH_FLUSH, &ar->ab->dev_flags)) {
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	time_left = wait_for_completion_timeout(&ar->thermal.wmi_sync,
+						ATH11K_THERMAL_SYNC_TIMEOUT_HZ);
+	if (!time_left) {
+		ath11k_warn(ar->ab, "failed to synchronize thermal read\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	spin_lock_bh(&ar->data_lock);
+	temperature = ar->thermal.temperature;
+	spin_unlock_bh(&ar->data_lock);
+
+	/* display in millidegree celcius */
+	ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000);
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+void ath11k_thermal_event_temperature(struct ath11k *ar, int temperature)
+{
+	spin_lock_bh(&ar->data_lock);
+	ar->thermal.temperature = temperature;
+	spin_unlock_bh(&ar->data_lock);
+	complete(&ar->thermal.wmi_sync);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath11k_thermal_show_temp,
+			  NULL, 0);
+
+static struct attribute *ath11k_hwmon_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ath11k_hwmon);
+
 int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state)
 {
 	struct ath11k_base *sc = ar->ab;
@@ -91,6 +157,7 @@ int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state)
 int ath11k_thermal_register(struct ath11k_base *sc)
 {
 	struct thermal_cooling_device *cdev;
+	struct device *hwmon_dev;
 	struct ath11k *ar;
 	struct ath11k_pdev *pdev;
 	int i, ret;
@@ -118,6 +185,18 @@ int ath11k_thermal_register(struct ath11k_base *sc)
 		}
 
 		ar->thermal.cdev = cdev;
+		if (!IS_REACHABLE(CONFIG_HWMON))
+			return 0;
+
+		hwmon_dev = devm_hwmon_device_register_with_groups(&ar->hw->wiphy->dev,
+								   "ath11k_hwmon", ar,
+								   ath11k_hwmon_groups);
+		if (IS_ERR(hwmon_dev)) {
+			ath11k_err(ar->ab, "failed to register hwmon device: %ld\n",
+				   PTR_ERR(hwmon_dev));
+			ret = -EINVAL;
+			goto err_thermal_destroy;
+		}
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath11k/thermal.h b/drivers/net/wireless/ath/ath11k/thermal.h
index 95a34803b60e..459b8d49c184 100644
--- a/drivers/net/wireless/ath/ath11k/thermal.h
+++ b/drivers/net/wireless/ath/ath11k/thermal.h
@@ -10,18 +10,26 @@
 #define ATH11K_THERMAL_TEMP_HIGH_MARK 150
 #define ATH11K_THERMAL_THROTTLE_MAX     100
 #define ATH11K_THERMAL_DEFAULT_DUTY_CYCLE 100
+#define ATH11K_HWMON_NAME_LEN           15
+#define ATH11K_THERMAL_SYNC_TIMEOUT_HZ (5 * HZ)
 
 struct ath11k_thermal {
 	struct thermal_cooling_device *cdev;
+	struct completion wmi_sync;
 
 	/* protected by conf_mutex */
 	u32 throttle_state;
+	/* temperature value in Celcius degree
+	 * protected by data_lock
+	 */
+	int temperature;
 };
 
 #if IS_REACHABLE(CONFIG_THERMAL)
 int ath11k_thermal_register(struct ath11k_base *sc);
 void ath11k_thermal_unregister(struct ath11k_base *sc);
 int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state);
+void ath11k_thermal_event_temperature(struct ath11k *ar, int temperature);
 #else
 static inline int ath11k_thermal_register(struct ath11k_base *sc)
 {
@@ -36,5 +44,10 @@ static inline int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_
 {
 }
 
+static inline void ath11k_thermal_event_temperature(struct ath11k *ar,
+						    int temperature)
+{
+}
+
 #endif
 #endif /* _ATH11K_THERMAL_ */
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 31b625a4192f..5b35d06a0d81 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1471,6 +1471,34 @@ int ath11k_wmi_send_stats_request_cmd(struct ath11k *ar,
 	return ret;
 }
 
+int ath11k_wmi_send_pdev_temperature_cmd(struct ath11k *ar)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct wmi_get_pdev_temperature_cmd *cmd;
+	struct sk_buff *skb;
+	int ret;
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_get_pdev_temperature_cmd *)skb->data;
+	cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_PDEV_GET_TEMPERATURE_CMD) |
+			  FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+	cmd->pdev_id = ar->pdev->pdev_id;
+
+	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_PDEV_GET_TEMPERATURE_CMDID);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to send WMI_PDEV_GET_TEMPERATURE cmd\n");
+		dev_kfree_skb(skb);
+	}
+
+	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
+		   "WMI pdev get temperature for pdev_id %d\n", ar->pdev->pdev_id);
+
+	return ret;
+}
+
 int ath11k_wmi_send_bcn_offload_control_cmd(struct ath11k *ar,
 					    u32 vdev_id, u32 bcn_ctrl_op)
 {
@@ -4232,6 +4260,31 @@ int ath11k_wmi_pull_fw_stats(struct ath11k_base *ab, struct sk_buff *skb,
 	return 0;
 }
 
+static int
+ath11k_pull_pdev_temp_ev(struct ath11k_base *ab, u8 *evt_buf,
+			 u32 len, const struct wmi_pdev_temperature_event *ev)
+{
+	const void **tb;
+	int ret;
+
+	tb = ath11k_wmi_tlv_parse_alloc(ab, evt_buf, len, GFP_ATOMIC);
+	if (IS_ERR(tb)) {
+		ret = PTR_ERR(tb);
+		ath11k_warn(ab, "failed to parse tlv: %d\n", ret);
+		return ret;
+	}
+
+	ev = tb[WMI_TAG_PDEV_TEMPERATURE_EVENT];
+	if (!ev) {
+		ath11k_warn(ab, "failed to fetch pdev temp ev");
+		kfree(tb);
+		return -EPROTO;
+	}
+
+	kfree(tb);
+	return 0;
+}
+
 size_t ath11k_wmi_fw_stats_num_vdevs(struct list_head *head)
 {
 	struct ath11k_fw_stats_vdev *i;
@@ -5578,6 +5631,30 @@ static void ath11k_pdev_ctl_failsafe_check_event(struct ath11k_base *ab,
 	kfree(tb);
 }
 
+static void
+ath11k_wmi_pdev_temperature_event(struct ath11k_base *ab,
+				  struct sk_buff *skb)
+{
+	struct ath11k *ar;
+	struct wmi_pdev_temperature_event ev = {0};
+
+	if (ath11k_pull_pdev_temp_ev(ab, skb->data, skb->len, &ev) != 0) {
+		ath11k_warn(ab, "failed to extract pdev temperature event");
+		return;
+	}
+
+	ath11k_dbg(ab, ATH11K_DBG_WMI,
+		   "pdev temperature ev temp %d pdev_id %d\n", ev.temp, ev.pdev_id);
+
+	ar = ath11k_mac_get_ar_by_pdev_id(ab, ev.pdev_id);
+	if (!ar) {
+		ath11k_warn(ab, "invalid pdev id in pdev temperature ev %d", ev.pdev_id);
+		return;
+	}
+
+	ath11k_thermal_event_temperature(ar, ev.temp);
+}
+
 static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
 {
 	struct wmi_cmd_hdr *cmd_hdr;
@@ -5655,6 +5732,9 @@ static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
 	case WMI_PDEV_CSA_SWITCH_COUNT_STATUS_EVENTID:
 		ath11k_wmi_pdev_csa_switch_count_status_event(ab, skb);
 		break;
+	case WMI_PDEV_TEMPERATURE_EVENTID:
+		ath11k_wmi_pdev_temperature_event(ab, skb);
+		break;
 	/* add Unsupported events here */
 	case WMI_TBTTOFFSET_EXT_UPDATE_EVENTID:
 	case WMI_VDEV_DELETE_RESP_EVENTID:
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index c8aa4cbb9a49..742fcd6e37a3 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -3304,6 +3304,12 @@ struct wmi_request_stats_cmd {
 	u32 pdev_id;
 } __packed;
 
+struct wmi_get_pdev_temperature_cmd {
+	u32 tlv_header;
+	u32 param;
+	u32 pdev_id;
+} __packed;
+
 #define WMI_BEACON_TX_BUFFER_SIZE	512
 
 struct wmi_bcn_tmpl_cmd {
@@ -4132,6 +4138,12 @@ struct wmi_pdev_radar_ev {
 	s32 sidx;
 } __packed;
 
+struct wmi_pdev_temperature_event {
+	/* temperature value in Celcius degree */
+	s32 temp;
+	u32 pdev_id;
+} __packed;
+
 #define WMI_RX_STATUS_OK			0x00
 #define WMI_RX_STATUS_ERR_CRC			0x01
 #define WMI_RX_STATUS_ERR_DECRYPT		0x08
@@ -4763,6 +4775,7 @@ int ath11k_wmi_pdev_bss_chan_info_request(struct ath11k *ar,
 					  enum wmi_bss_chan_info_req_type type);
 int ath11k_wmi_send_stats_request_cmd(struct ath11k *ar,
 				      struct stats_request_params *param);
+int ath11k_wmi_send_pdev_temperature_cmd(struct ath11k *ar);
 int ath11k_wmi_send_peer_flush_tids_cmd(struct ath11k *ar,
 					u8 peer_addr[ETH_ALEN],
 					struct peer_flush_params *param);
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH v2 2/2] ath11k: add thermal sensor device support
@ 2020-02-15  0:25   ` Pradeep Kumar Chitrapu
  0 siblings, 0 replies; 6+ messages in thread
From: Pradeep Kumar Chitrapu @ 2020-02-15  0:25 UTC (permalink / raw)
  To: ath11k; +Cc: Pradeep Kumar Chitrapu, linux-wireless

Temperature sensor generates electrical analog voltage from temperature
of each chain. The analog voltage is converted to digital value through
ADC. For reading temperature values fom user space, hw monitoring device
is used.

Whenever the user requests for current temperature, the driver sends WMI
command and wait for response. For reading temperature,

cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
v2:
 - fix warnings and rebase

 drivers/net/wireless/ath/ath11k/core.c    |  1 +
 drivers/net/wireless/ath/ath11k/mac.c     |  2 +
 drivers/net/wireless/ath/ath11k/thermal.c | 79 ++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/thermal.h | 13 +++++
 drivers/net/wireless/ath/ath11k/wmi.c     | 80 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath11k/wmi.h     | 13 +++++
 6 files changed, 188 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index abfd451dead2..bf5657d2ae18 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -655,6 +655,7 @@ static void ath11k_core_restart(struct work_struct *work)
 		complete(&ar->install_key_done);
 		complete(&ar->vdev_setup_done);
 		complete(&ar->bss_survey_done);
+		complete(&ar->thermal.wmi_sync);
 
 		wake_up(&ar->dp.tx_empty_waitq);
 		idr_for_each(&ar->txmgmt_idr,
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index f5e171c26bd5..e28f5a348be6 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5905,6 +5905,8 @@ int ath11k_mac_allocate(struct ath11k_base *ab)
 		init_completion(&ar->bss_survey_done);
 		init_completion(&ar->scan.started);
 		init_completion(&ar->scan.completed);
+		init_completion(&ar->thermal.wmi_sync);
+
 		INIT_DELAYED_WORK(&ar->scan.timeout, ath11k_scan_timeout_work);
 		INIT_WORK(&ar->regd_update_work, ath11k_regd_update_work);
 
diff --git a/drivers/net/wireless/ath/ath11k/thermal.c b/drivers/net/wireless/ath/ath11k/thermal.c
index 6c2d96be34cb..259dddbda2c7 100644
--- a/drivers/net/wireless/ath/ath11k/thermal.c
+++ b/drivers/net/wireless/ath/ath11k/thermal.c
@@ -6,6 +6,8 @@
 #include <linux/device.h>
 #include <linux/sysfs.h>
 #include <linux/thermal.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
 #include "core.h"
 #include "debug.h"
 
@@ -57,6 +59,70 @@
 	.set_cur_state = ath11k_thermal_set_cur_throttle_state,
 };
 
+static ssize_t ath11k_thermal_show_temp(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct ath11k *ar = dev_get_drvdata(dev);
+	int ret, temperature;
+	unsigned long time_left;
+
+	mutex_lock(&ar->conf_mutex);
+
+	/* Can't get temperature when the card is off */
+	if (ar->state != ATH11K_STATE_ON) {
+		ret = -ENETDOWN;
+		goto out;
+	}
+
+	reinit_completion(&ar->thermal.wmi_sync);
+	ret = ath11k_wmi_send_pdev_temperature_cmd(ar);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to read temperature %d\n", ret);
+		goto out;
+	}
+
+	if (test_bit(ATH11K_FLAG_CRASH_FLUSH, &ar->ab->dev_flags)) {
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	time_left = wait_for_completion_timeout(&ar->thermal.wmi_sync,
+						ATH11K_THERMAL_SYNC_TIMEOUT_HZ);
+	if (!time_left) {
+		ath11k_warn(ar->ab, "failed to synchronize thermal read\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	spin_lock_bh(&ar->data_lock);
+	temperature = ar->thermal.temperature;
+	spin_unlock_bh(&ar->data_lock);
+
+	/* display in millidegree celcius */
+	ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000);
+out:
+	mutex_unlock(&ar->conf_mutex);
+	return ret;
+}
+
+void ath11k_thermal_event_temperature(struct ath11k *ar, int temperature)
+{
+	spin_lock_bh(&ar->data_lock);
+	ar->thermal.temperature = temperature;
+	spin_unlock_bh(&ar->data_lock);
+	complete(&ar->thermal.wmi_sync);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath11k_thermal_show_temp,
+			  NULL, 0);
+
+static struct attribute *ath11k_hwmon_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ath11k_hwmon);
+
 int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state)
 {
 	struct ath11k_base *sc = ar->ab;
@@ -91,6 +157,7 @@ int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state)
 int ath11k_thermal_register(struct ath11k_base *sc)
 {
 	struct thermal_cooling_device *cdev;
+	struct device *hwmon_dev;
 	struct ath11k *ar;
 	struct ath11k_pdev *pdev;
 	int i, ret;
@@ -118,6 +185,18 @@ int ath11k_thermal_register(struct ath11k_base *sc)
 		}
 
 		ar->thermal.cdev = cdev;
+		if (!IS_REACHABLE(CONFIG_HWMON))
+			return 0;
+
+		hwmon_dev = devm_hwmon_device_register_with_groups(&ar->hw->wiphy->dev,
+								   "ath11k_hwmon", ar,
+								   ath11k_hwmon_groups);
+		if (IS_ERR(hwmon_dev)) {
+			ath11k_err(ar->ab, "failed to register hwmon device: %ld\n",
+				   PTR_ERR(hwmon_dev));
+			ret = -EINVAL;
+			goto err_thermal_destroy;
+		}
 	}
 
 	return 0;
diff --git a/drivers/net/wireless/ath/ath11k/thermal.h b/drivers/net/wireless/ath/ath11k/thermal.h
index 95a34803b60e..459b8d49c184 100644
--- a/drivers/net/wireless/ath/ath11k/thermal.h
+++ b/drivers/net/wireless/ath/ath11k/thermal.h
@@ -10,18 +10,26 @@
 #define ATH11K_THERMAL_TEMP_HIGH_MARK 150
 #define ATH11K_THERMAL_THROTTLE_MAX     100
 #define ATH11K_THERMAL_DEFAULT_DUTY_CYCLE 100
+#define ATH11K_HWMON_NAME_LEN           15
+#define ATH11K_THERMAL_SYNC_TIMEOUT_HZ (5 * HZ)
 
 struct ath11k_thermal {
 	struct thermal_cooling_device *cdev;
+	struct completion wmi_sync;
 
 	/* protected by conf_mutex */
 	u32 throttle_state;
+	/* temperature value in Celcius degree
+	 * protected by data_lock
+	 */
+	int temperature;
 };
 
 #if IS_REACHABLE(CONFIG_THERMAL)
 int ath11k_thermal_register(struct ath11k_base *sc);
 void ath11k_thermal_unregister(struct ath11k_base *sc);
 int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_state);
+void ath11k_thermal_event_temperature(struct ath11k *ar, int temperature);
 #else
 static inline int ath11k_thermal_register(struct ath11k_base *sc)
 {
@@ -36,5 +44,10 @@ static inline int ath11k_thermal_set_throttling(struct ath11k *ar, u32 throttle_
 {
 }
 
+static inline void ath11k_thermal_event_temperature(struct ath11k *ar,
+						    int temperature)
+{
+}
+
 #endif
 #endif /* _ATH11K_THERMAL_ */
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 31b625a4192f..5b35d06a0d81 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1471,6 +1471,34 @@ int ath11k_wmi_send_stats_request_cmd(struct ath11k *ar,
 	return ret;
 }
 
+int ath11k_wmi_send_pdev_temperature_cmd(struct ath11k *ar)
+{
+	struct ath11k_pdev_wmi *wmi = ar->wmi;
+	struct wmi_get_pdev_temperature_cmd *cmd;
+	struct sk_buff *skb;
+	int ret;
+
+	skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_get_pdev_temperature_cmd *)skb->data;
+	cmd->tlv_header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_PDEV_GET_TEMPERATURE_CMD) |
+			  FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
+	cmd->pdev_id = ar->pdev->pdev_id;
+
+	ret = ath11k_wmi_cmd_send(wmi, skb, WMI_PDEV_GET_TEMPERATURE_CMDID);
+	if (ret) {
+		ath11k_warn(ar->ab, "failed to send WMI_PDEV_GET_TEMPERATURE cmd\n");
+		dev_kfree_skb(skb);
+	}
+
+	ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
+		   "WMI pdev get temperature for pdev_id %d\n", ar->pdev->pdev_id);
+
+	return ret;
+}
+
 int ath11k_wmi_send_bcn_offload_control_cmd(struct ath11k *ar,
 					    u32 vdev_id, u32 bcn_ctrl_op)
 {
@@ -4232,6 +4260,31 @@ int ath11k_wmi_pull_fw_stats(struct ath11k_base *ab, struct sk_buff *skb,
 	return 0;
 }
 
+static int
+ath11k_pull_pdev_temp_ev(struct ath11k_base *ab, u8 *evt_buf,
+			 u32 len, const struct wmi_pdev_temperature_event *ev)
+{
+	const void **tb;
+	int ret;
+
+	tb = ath11k_wmi_tlv_parse_alloc(ab, evt_buf, len, GFP_ATOMIC);
+	if (IS_ERR(tb)) {
+		ret = PTR_ERR(tb);
+		ath11k_warn(ab, "failed to parse tlv: %d\n", ret);
+		return ret;
+	}
+
+	ev = tb[WMI_TAG_PDEV_TEMPERATURE_EVENT];
+	if (!ev) {
+		ath11k_warn(ab, "failed to fetch pdev temp ev");
+		kfree(tb);
+		return -EPROTO;
+	}
+
+	kfree(tb);
+	return 0;
+}
+
 size_t ath11k_wmi_fw_stats_num_vdevs(struct list_head *head)
 {
 	struct ath11k_fw_stats_vdev *i;
@@ -5578,6 +5631,30 @@ static void ath11k_pdev_ctl_failsafe_check_event(struct ath11k_base *ab,
 	kfree(tb);
 }
 
+static void
+ath11k_wmi_pdev_temperature_event(struct ath11k_base *ab,
+				  struct sk_buff *skb)
+{
+	struct ath11k *ar;
+	struct wmi_pdev_temperature_event ev = {0};
+
+	if (ath11k_pull_pdev_temp_ev(ab, skb->data, skb->len, &ev) != 0) {
+		ath11k_warn(ab, "failed to extract pdev temperature event");
+		return;
+	}
+
+	ath11k_dbg(ab, ATH11K_DBG_WMI,
+		   "pdev temperature ev temp %d pdev_id %d\n", ev.temp, ev.pdev_id);
+
+	ar = ath11k_mac_get_ar_by_pdev_id(ab, ev.pdev_id);
+	if (!ar) {
+		ath11k_warn(ab, "invalid pdev id in pdev temperature ev %d", ev.pdev_id);
+		return;
+	}
+
+	ath11k_thermal_event_temperature(ar, ev.temp);
+}
+
 static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
 {
 	struct wmi_cmd_hdr *cmd_hdr;
@@ -5655,6 +5732,9 @@ static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
 	case WMI_PDEV_CSA_SWITCH_COUNT_STATUS_EVENTID:
 		ath11k_wmi_pdev_csa_switch_count_status_event(ab, skb);
 		break;
+	case WMI_PDEV_TEMPERATURE_EVENTID:
+		ath11k_wmi_pdev_temperature_event(ab, skb);
+		break;
 	/* add Unsupported events here */
 	case WMI_TBTTOFFSET_EXT_UPDATE_EVENTID:
 	case WMI_VDEV_DELETE_RESP_EVENTID:
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index c8aa4cbb9a49..742fcd6e37a3 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -3304,6 +3304,12 @@ struct wmi_request_stats_cmd {
 	u32 pdev_id;
 } __packed;
 
+struct wmi_get_pdev_temperature_cmd {
+	u32 tlv_header;
+	u32 param;
+	u32 pdev_id;
+} __packed;
+
 #define WMI_BEACON_TX_BUFFER_SIZE	512
 
 struct wmi_bcn_tmpl_cmd {
@@ -4132,6 +4138,12 @@ struct wmi_pdev_radar_ev {
 	s32 sidx;
 } __packed;
 
+struct wmi_pdev_temperature_event {
+	/* temperature value in Celcius degree */
+	s32 temp;
+	u32 pdev_id;
+} __packed;
+
 #define WMI_RX_STATUS_OK			0x00
 #define WMI_RX_STATUS_ERR_CRC			0x01
 #define WMI_RX_STATUS_ERR_DECRYPT		0x08
@@ -4763,6 +4775,7 @@ int ath11k_wmi_pdev_bss_chan_info_request(struct ath11k *ar,
 					  enum wmi_bss_chan_info_req_type type);
 int ath11k_wmi_send_stats_request_cmd(struct ath11k *ar,
 				      struct stats_request_params *param);
+int ath11k_wmi_send_pdev_temperature_cmd(struct ath11k *ar);
 int ath11k_wmi_send_peer_flush_tids_cmd(struct ath11k *ar,
 					u8 peer_addr[ETH_ALEN],
 					struct peer_flush_params *param);
-- 
1.9.1

_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] ath11k: add thermal cooling device support
  2020-02-15  0:25 ` Pradeep Kumar Chitrapu
  (?)
  (?)
@ 2020-03-11 16:47 ` Kalle Valo
  -1 siblings, 0 replies; 6+ messages in thread
From: Kalle Valo @ 2020-03-11 16:47 UTC (permalink / raw)
  To: Pradeep Kumar Chitrapu; +Cc: ath11k, linux-wireless, Pradeep Kumar Chitrapu

Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> wrote:

> Thermal cooling device support is added to control the temperature by
> throttling the data transmission for the given duration. Throttling is
> done by suspending all data tx queues by given percentage of time. The
> thermal device allows user to configure duty cycle.
> 
> Throttling can be disabled by setting the duty cycle to 0. The cooling
> device can be found under /sys/class/thermal/cooling_deviceX/.
> Corresponding soft link to this device can be found under phy folder.
> 
> /sys/class/ieee80211/phy*/device/cooling_device.
> 
> To set duty cycle as 40%,
> 
> echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state
> 
> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

2 patches applied to ath-next branch of ath.git, thanks.

2a63bbca06b2 ath11k: add thermal cooling device support
a41d10348b01 ath11k: add thermal sensor device support

-- 
https://patchwork.kernel.org/patch/11383647/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH v2 1/2] ath11k: add thermal cooling device support
  2020-02-15  0:25 ` Pradeep Kumar Chitrapu
                   ` (2 preceding siblings ...)
  (?)
@ 2020-03-11 16:47 ` Kalle Valo
  -1 siblings, 0 replies; 6+ messages in thread
From: Kalle Valo @ 2020-03-11 16:47 UTC (permalink / raw)
  To: Pradeep Kumar Chitrapu; +Cc: linux-wireless, ath11k

Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> wrote:

> Thermal cooling device support is added to control the temperature by
> throttling the data transmission for the given duration. Throttling is
> done by suspending all data tx queues by given percentage of time. The
> thermal device allows user to configure duty cycle.
> 
> Throttling can be disabled by setting the duty cycle to 0. The cooling
> device can be found under /sys/class/thermal/cooling_deviceX/.
> Corresponding soft link to this device can be found under phy folder.
> 
> /sys/class/ieee80211/phy*/device/cooling_device.
> 
> To set duty cycle as 40%,
> 
> echo 40 >/sys/class/ieee80211/phy*/device/cooling_device/cur_state
> 
> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

2 patches applied to ath-next branch of ath.git, thanks.

2a63bbca06b2 ath11k: add thermal cooling device support
a41d10348b01 ath11k: add thermal sensor device support

-- 
https://patchwork.kernel.org/patch/11383647/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-03-11 16:48 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-15  0:25 [PATCH v2 1/2] ath11k: add thermal cooling device support Pradeep Kumar Chitrapu
2020-02-15  0:25 ` Pradeep Kumar Chitrapu
2020-02-15  0:25 ` [PATCH v2 2/2] ath11k: add thermal sensor " Pradeep Kumar Chitrapu
2020-02-15  0:25   ` Pradeep Kumar Chitrapu
2020-03-11 16:47 ` [PATCH v2 1/2] ath11k: add thermal cooling " Kalle Valo
2020-03-11 16:47 ` Kalle Valo

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.