All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v7 0/6] Add new series Micron SPI NAND devices
@ 2020-03-11 17:57 ` shiva.linuxworks
  0 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

This patchset is for the new series of Micron SPI NAND devices, and the
following links are their datasheets.

M78A:
[1] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
[2] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf

M79A:
[3] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
[4] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf

M70A:
[5] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
[6] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
[7] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
[8] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf

Changes since v6:
-----------------

1. Rebased series to nand/next.
2. Added Reviewed-by from Boris.

Changes since v5:
-----------------

1. Rebased series to v5.6-rc1.

Changes since v4:
-----------------

1. Patch 2 is separated into two as per the comment by Boris.
2. Renamed MICRON_CFG_CONTI_READ into MICRON_CFG_CR.
3. Reworked die selection function as per the comment by Boris.

Changes since v3:
-----------------

1. Patch 3 and 4 reworked as follows
   - Patch 3 introducing the Continuous read feature
   - Patch 4 adding devices with the feature

Changes since v2:
-----------------

1. Patch commit messages have been modified.
2. Handled devices with Continuous Read feature with vendor specific flag.
3. Reworked die selection function as per the comment.

Changes since v1:
-----------------

1. The patch split into multiple patches.
2. Added comments for selecting the die.

Shivamurthy Shastri (6):
  mtd: spinand: micron: Generalize the OOB layout structure and function
    names
  mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
  mtd: spinand: micron: Add new Micron SPI NAND devices
  mtd: spinand: micron: identify SPI NAND device with Continuous Read
    mode
  mtd: spinand: micron: Add M70A series Micron SPI NAND devices
  mtd: spinand: micron: Add new Micron SPI NAND devices with multiple
    dies

 drivers/mtd/nand/spi/micron.c | 158 +++++++++++++++++++++++++++++++---
 include/linux/mtd/spinand.h   |   1 +
 2 files changed, 145 insertions(+), 14 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 42+ messages in thread
* [PATCH v7 0/6] Add new series Micron SPI NAND devices
@ 2020-03-11 17:57 ` shiva.linuxworks
  0 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

This patchset is for the new series of Micron SPI NAND devices, and the
following links are their datasheets.

M78A:
[1] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
[2] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf

M79A:
[3] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
[4] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf

M70A:
[5] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
[6] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
[7] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
[8] https://www.micron.com/~/media/documents/products/data-sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf

Changes since v6:
-----------------

1. Rebased series to nand/next.
2. Added Reviewed-by from Boris.

Changes since v5:
-----------------

1. Rebased series to v5.6-rc1.

Changes since v4:
-----------------

1. Patch 2 is separated into two as per the comment by Boris.
2. Renamed MICRON_CFG_CONTI_READ into MICRON_CFG_CR.
3. Reworked die selection function as per the comment by Boris.

Changes since v3:
-----------------

1. Patch 3 and 4 reworked as follows
   - Patch 3 introducing the Continuous read feature
   - Patch 4 adding devices with the feature

Changes since v2:
-----------------

1. Patch commit messages have been modified.
2. Handled devices with Continuous Read feature with vendor specific flag.
3. Reworked die selection function as per the comment.

Changes since v1:
-----------------

1. The patch split into multiple patches.
2. Added comments for selecting the die.

Shivamurthy Shastri (6):
  mtd: spinand: micron: Generalize the OOB layout structure and function
    names
  mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
  mtd: spinand: micron: Add new Micron SPI NAND devices
  mtd: spinand: micron: identify SPI NAND device with Continuous Read
    mode
  mtd: spinand: micron: Add M70A series Micron SPI NAND devices
  mtd: spinand: micron: Add new Micron SPI NAND devices with multiple
    dies

 drivers/mtd/nand/spi/micron.c | 158 +++++++++++++++++++++++++++++++---
 include/linux/mtd/spinand.h   |   1 +
 2 files changed, 145 insertions(+), 14 deletions(-)

-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* [PATCH v7 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names
  2020-03-11 17:57 ` shiva.linuxworks
@ 2020-03-11 17:57   ` shiva.linuxworks
  -1 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

In order to add new Micron SPI NAND devices, we generalized the OOB
layout structure and function names.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index f56f81325e10..cc1ee68421c8 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -34,38 +34,38 @@ static SPINAND_OP_VARIANTS(update_cache_variants,
 		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
 		SPINAND_PROG_LOAD(false, 0, NULL, 0));
 
-static int mt29f2g01abagd_ooblayout_ecc(struct mtd_info *mtd, int section,
-					struct mtd_oob_region *region)
+static int micron_8_ooblayout_ecc(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *region)
 {
 	if (section)
 		return -ERANGE;
 
-	region->offset = 64;
-	region->length = 64;
+	region->offset = mtd->oobsize / 2;
+	region->length = mtd->oobsize / 2;
 
 	return 0;
 }
 
-static int mt29f2g01abagd_ooblayout_free(struct mtd_info *mtd, int section,
-					 struct mtd_oob_region *region)
+static int micron_8_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
 {
 	if (section)
 		return -ERANGE;
 
 	/* Reserve 2 bytes for the BBM. */
 	region->offset = 2;
-	region->length = 62;
+	region->length = (mtd->oobsize / 2) - 2;
 
 	return 0;
 }
 
-static const struct mtd_ooblayout_ops mt29f2g01abagd_ooblayout = {
-	.ecc = mt29f2g01abagd_ooblayout_ecc,
-	.free = mt29f2g01abagd_ooblayout_free,
+static const struct mtd_ooblayout_ops micron_8_ooblayout = {
+	.ecc = micron_8_ooblayout_ecc,
+	.free = micron_8_ooblayout_free,
 };
 
-static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
-					 u8 status)
+static int micron_8_ecc_get_status(struct spinand_device *spinand,
+				   u8 status)
 {
 	switch (status & MICRON_STATUS_ECC_MASK) {
 	case STATUS_ECC_NO_BITFLIPS:
@@ -99,8 +99,8 @@ static const struct spinand_info micron_spinand_table[] = {
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&mt29f2g01abagd_ooblayout,
-				     mt29f2g01abagd_ecc_get_status)),
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread
* [PATCH v7 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names
@ 2020-03-11 17:57   ` shiva.linuxworks
  0 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

In order to add new Micron SPI NAND devices, we generalized the OOB
layout structure and function names.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index f56f81325e10..cc1ee68421c8 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -34,38 +34,38 @@ static SPINAND_OP_VARIANTS(update_cache_variants,
 		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
 		SPINAND_PROG_LOAD(false, 0, NULL, 0));
 
-static int mt29f2g01abagd_ooblayout_ecc(struct mtd_info *mtd, int section,
-					struct mtd_oob_region *region)
+static int micron_8_ooblayout_ecc(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *region)
 {
 	if (section)
 		return -ERANGE;
 
-	region->offset = 64;
-	region->length = 64;
+	region->offset = mtd->oobsize / 2;
+	region->length = mtd->oobsize / 2;
 
 	return 0;
 }
 
-static int mt29f2g01abagd_ooblayout_free(struct mtd_info *mtd, int section,
-					 struct mtd_oob_region *region)
+static int micron_8_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
 {
 	if (section)
 		return -ERANGE;
 
 	/* Reserve 2 bytes for the BBM. */
 	region->offset = 2;
-	region->length = 62;
+	region->length = (mtd->oobsize / 2) - 2;
 
 	return 0;
 }
 
-static const struct mtd_ooblayout_ops mt29f2g01abagd_ooblayout = {
-	.ecc = mt29f2g01abagd_ooblayout_ecc,
-	.free = mt29f2g01abagd_ooblayout_free,
+static const struct mtd_ooblayout_ops micron_8_ooblayout = {
+	.ecc = micron_8_ooblayout_ecc,
+	.free = micron_8_ooblayout_free,
 };
 
-static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
-					 u8 status)
+static int micron_8_ecc_get_status(struct spinand_device *spinand,
+				   u8 status)
 {
 	switch (status & MICRON_STATUS_ECC_MASK) {
 	case STATUS_ECC_NO_BITFLIPS:
@@ -99,8 +99,8 @@ static const struct spinand_info micron_spinand_table[] = {
 					      &write_cache_variants,
 					      &update_cache_variants),
 		     0,
-		     SPINAND_ECCINFO(&mt29f2g01abagd_ooblayout,
-				     mt29f2g01abagd_ecc_get_status)),
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply related	[flat|nested] 42+ messages in thread
* [PATCH v7 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
  2020-03-11 17:57 ` shiva.linuxworks
@ 2020-03-11 17:57   ` shiva.linuxworks
  -1 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add the SPI NAND device MT29F2G01ABAGD series number, size and voltage
details as a comment.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index cc1ee68421c8..4727933c894b 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -91,6 +91,7 @@ static int micron_8_ecc_get_status(struct spinand_device *spinand,
 }
 
 static const struct spinand_info micron_spinand_table[] = {
+	/* M79A 2Gb 3.3V */
 	SPINAND_INFO("MT29F2G01ABAGD",
 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x24),
 		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread
* [PATCH v7 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
@ 2020-03-11 17:57   ` shiva.linuxworks
  0 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add the SPI NAND device MT29F2G01ABAGD series number, size and voltage
details as a comment.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index cc1ee68421c8..4727933c894b 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -91,6 +91,7 @@ static int micron_8_ecc_get_status(struct spinand_device *spinand,
 }
 
 static const struct spinand_info micron_spinand_table[] = {
+	/* M79A 2Gb 3.3V */
 	SPINAND_INFO("MT29F2G01ABAGD",
 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x24),
 		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply related	[flat|nested] 42+ messages in thread
* [PATCH v7 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices
  2020-03-11 17:57 ` shiva.linuxworks
@ 2020-03-11 17:57   ` shiva.linuxworks
  -1 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for M79A and M78A series Micron SPI NAND devices.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 4727933c894b..26925714a9fb 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -102,6 +102,39 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M79A 2Gb 1.8V */
+	SPINAND_INFO("MT29F2G01ABBGD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x25),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 3.3V */
+	SPINAND_INFO("MT29F1G01ABAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x14),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 1.8V */
+	SPINAND_INFO("MT29F1G01ABAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x15),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread
* [PATCH v7 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices
@ 2020-03-11 17:57   ` shiva.linuxworks
  0 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for M79A and M78A series Micron SPI NAND devices.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 4727933c894b..26925714a9fb 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -102,6 +102,39 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M79A 2Gb 1.8V */
+	SPINAND_INFO("MT29F2G01ABBGD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x25),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 40, 2, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 3.3V */
+	SPINAND_INFO("MT29F1G01ABAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x14),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M78A 1Gb 1.8V */
+	SPINAND_INFO("MT29F1G01ABAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x15),
+		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply related	[flat|nested] 42+ messages in thread
* [PATCH v7 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode
  2020-03-11 17:57 ` shiva.linuxworks
@ 2020-03-11 17:57   ` shiva.linuxworks
  -1 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add SPINAND_HAS_CR_FEAT_BIT flag to identify the SPI NAND device with
the Continuous Read mode.

Some of the Micron SPI NAND devices have the "Continuous Read" feature
enabled by default, which does not fit the subsystem needs.

In this mode, the READ CACHE command doesn't require the starting column
address. The device always output the data starting from the first
column of the cache register, and once the end of the cache register
reached, the data output continues through the next page. With the
continuous read mode, it is possible to read out the entire block using
a single READ command, and once the end of the block reached, the output
pins become High-Z state. However, during this mode the read command
doesn't output the OOB area.

Hence, we disable the feature at probe time.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 16 ++++++++++++++++
 include/linux/mtd/spinand.h   |  1 +
 2 files changed, 17 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 26925714a9fb..956f7710aca2 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -18,6 +18,8 @@
 #define MICRON_STATUS_ECC_4TO6_BITFLIPS	(3 << 4)
 #define MICRON_STATUS_ECC_7TO8_BITFLIPS	(5 << 4)
 
+#define MICRON_CFG_CR			BIT(0)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -137,7 +139,21 @@ static const struct spinand_info micron_spinand_table[] = {
 				     micron_8_ecc_get_status)),
 };
 
+static int micron_spinand_init(struct spinand_device *spinand)
+{
+	/*
+	 * M70A device series enable Continuous Read feature at Power-up,
+	 * which is not supported. Disable this bit to avoid any possible
+	 * failure.
+	 */
+	if (spinand->flags & SPINAND_HAS_CR_FEAT_BIT)
+		return spinand_upd_cfg(spinand, MICRON_CFG_CR, 0);
+
+	return 0;
+}
+
 static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
+	.init = micron_spinand_init,
 };
 
 const struct spinand_manufacturer micron_spinand_manufacturer = {
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index f4c4ae87181b..1077c45721ff 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -284,6 +284,7 @@ struct spinand_ecc_info {
 };
 
 #define SPINAND_HAS_QE_BIT		BIT(0)
+#define SPINAND_HAS_CR_FEAT_BIT		BIT(1)
 
 /**
  * struct spinand_info - Structure used to describe SPI NAND chips
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread
* [PATCH v7 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode
@ 2020-03-11 17:57   ` shiva.linuxworks
  0 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add SPINAND_HAS_CR_FEAT_BIT flag to identify the SPI NAND device with
the Continuous Read mode.

Some of the Micron SPI NAND devices have the "Continuous Read" feature
enabled by default, which does not fit the subsystem needs.

In this mode, the READ CACHE command doesn't require the starting column
address. The device always output the data starting from the first
column of the cache register, and once the end of the cache register
reached, the data output continues through the next page. With the
continuous read mode, it is possible to read out the entire block using
a single READ command, and once the end of the block reached, the output
pins become High-Z state. However, during this mode the read command
doesn't output the OOB area.

Hence, we disable the feature at probe time.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 16 ++++++++++++++++
 include/linux/mtd/spinand.h   |  1 +
 2 files changed, 17 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 26925714a9fb..956f7710aca2 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -18,6 +18,8 @@
 #define MICRON_STATUS_ECC_4TO6_BITFLIPS	(3 << 4)
 #define MICRON_STATUS_ECC_7TO8_BITFLIPS	(5 << 4)
 
+#define MICRON_CFG_CR			BIT(0)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -137,7 +139,21 @@ static const struct spinand_info micron_spinand_table[] = {
 				     micron_8_ecc_get_status)),
 };
 
+static int micron_spinand_init(struct spinand_device *spinand)
+{
+	/*
+	 * M70A device series enable Continuous Read feature at Power-up,
+	 * which is not supported. Disable this bit to avoid any possible
+	 * failure.
+	 */
+	if (spinand->flags & SPINAND_HAS_CR_FEAT_BIT)
+		return spinand_upd_cfg(spinand, MICRON_CFG_CR, 0);
+
+	return 0;
+}
+
 static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
+	.init = micron_spinand_init,
 };
 
 const struct spinand_manufacturer micron_spinand_manufacturer = {
diff --git a/include/linux/mtd/spinand.h b/include/linux/mtd/spinand.h
index f4c4ae87181b..1077c45721ff 100644
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -284,6 +284,7 @@ struct spinand_ecc_info {
 };
 
 #define SPINAND_HAS_QE_BIT		BIT(0)
+#define SPINAND_HAS_CR_FEAT_BIT		BIT(1)
 
 /**
  * struct spinand_info - Structure used to describe SPI NAND chips
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply related	[flat|nested] 42+ messages in thread
* [PATCH v7 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices
  2020-03-11 17:57 ` shiva.linuxworks
@ 2020-03-11 17:57   ` shiva.linuxworks
  -1 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for M70A series Micron SPI NAND devices.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 956f7710aca2..d6fd63008782 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -137,6 +137,28 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M70A 4Gb 3.3V */
+	SPINAND_INFO("MT29F4G01ABAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x34),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M70A 4Gb 1.8V */
+	SPINAND_INFO("MT29F4G01ABBFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x35),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static int micron_spinand_init(struct spinand_device *spinand)
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread
* [PATCH v7 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices
@ 2020-03-11 17:57   ` shiva.linuxworks
  0 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for M70A series Micron SPI NAND devices.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index 956f7710aca2..d6fd63008782 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -137,6 +137,28 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M70A 4Gb 3.3V */
+	SPINAND_INFO("MT29F4G01ABAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x34),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
+	/* M70A 4Gb 1.8V */
+	SPINAND_INFO("MT29F4G01ABBFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x35),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status)),
 };
 
 static int micron_spinand_init(struct spinand_device *spinand)
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply related	[flat|nested] 42+ messages in thread
* [PATCH v7 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies
  2020-03-11 17:57 ` shiva.linuxworks
@ 2020-03-11 17:57   ` shiva.linuxworks
  -1 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for new Micron SPI NAND devices, which have multiple
dies.

Also, enable support to select the dies.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 58 +++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index d6fd63008782..5d370cfcdaaa 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -20,6 +20,14 @@
 
 #define MICRON_CFG_CR			BIT(0)
 
+/*
+ * As per datasheet, die selection is done by the 6th bit of Die
+ * Select Register (Address 0xD0).
+ */
+#define MICRON_DIE_SELECT_REG	0xD0
+
+#define MICRON_SELECT_DIE(x)	((x) << 6)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -66,6 +74,20 @@ static const struct mtd_ooblayout_ops micron_8_ooblayout = {
 	.free = micron_8_ooblayout_free,
 };
 
+static int micron_select_target(struct spinand_device *spinand,
+				unsigned int target)
+{
+	struct spi_mem_op op = SPINAND_SET_FEATURE_OP(MICRON_DIE_SELECT_REG,
+						      spinand->scratchbuf);
+
+	if (target > 1)
+		return -EINVAL;
+
+	*spinand->scratchbuf = MICRON_SELECT_DIE(target);
+
+	return spi_mem_exec_op(spinand->spimem, &op);
+}
+
 static int micron_8_ecc_get_status(struct spinand_device *spinand,
 				   u8 status)
 {
@@ -137,6 +159,18 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M79A 4Gb 3.3V */
+	SPINAND_INFO("MT29F4G01ADAGD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x36),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 80, 2, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
 	/* M70A 4Gb 3.3V */
 	SPINAND_INFO("MT29F4G01ABAFD",
 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x34),
@@ -159,6 +193,30 @@ static const struct spinand_info micron_spinand_table[] = {
 		     SPINAND_HAS_CR_FEAT_BIT,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M70A 8Gb 3.3V */
+	SPINAND_INFO("MT29F8G01ADAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x46),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
+	/* M70A 8Gb 1.8V */
+	SPINAND_INFO("MT29F8G01ADBFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x47),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
 };
 
 static int micron_spinand_init(struct spinand_device *spinand)
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 42+ messages in thread
* [PATCH v7 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies
@ 2020-03-11 17:57   ` shiva.linuxworks
  0 siblings, 0 replies; 42+ messages in thread
From: shiva.linuxworks @ 2020-03-11 17:57 UTC (permalink / raw)
  To: Miquel Raynal, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	linux-kernel
  Cc: Shivamurthy Shastri

From: Shivamurthy Shastri <sshivamurthy@micron.com>

Add device table for new Micron SPI NAND devices, which have multiple
dies.

Also, enable support to select the dies.

Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/mtd/nand/spi/micron.c | 58 +++++++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/drivers/mtd/nand/spi/micron.c b/drivers/mtd/nand/spi/micron.c
index d6fd63008782..5d370cfcdaaa 100644
--- a/drivers/mtd/nand/spi/micron.c
+++ b/drivers/mtd/nand/spi/micron.c
@@ -20,6 +20,14 @@
 
 #define MICRON_CFG_CR			BIT(0)
 
+/*
+ * As per datasheet, die selection is done by the 6th bit of Die
+ * Select Register (Address 0xD0).
+ */
+#define MICRON_DIE_SELECT_REG	0xD0
+
+#define MICRON_SELECT_DIE(x)	((x) << 6)
+
 static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
@@ -66,6 +74,20 @@ static const struct mtd_ooblayout_ops micron_8_ooblayout = {
 	.free = micron_8_ooblayout_free,
 };
 
+static int micron_select_target(struct spinand_device *spinand,
+				unsigned int target)
+{
+	struct spi_mem_op op = SPINAND_SET_FEATURE_OP(MICRON_DIE_SELECT_REG,
+						      spinand->scratchbuf);
+
+	if (target > 1)
+		return -EINVAL;
+
+	*spinand->scratchbuf = MICRON_SELECT_DIE(target);
+
+	return spi_mem_exec_op(spinand->spimem, &op);
+}
+
 static int micron_8_ecc_get_status(struct spinand_device *spinand,
 				   u8 status)
 {
@@ -137,6 +159,18 @@ static const struct spinand_info micron_spinand_table[] = {
 		     0,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M79A 4Gb 3.3V */
+	SPINAND_INFO("MT29F4G01ADAGD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x36),
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 80, 2, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
 	/* M70A 4Gb 3.3V */
 	SPINAND_INFO("MT29F4G01ABAFD",
 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x34),
@@ -159,6 +193,30 @@ static const struct spinand_info micron_spinand_table[] = {
 		     SPINAND_HAS_CR_FEAT_BIT,
 		     SPINAND_ECCINFO(&micron_8_ooblayout,
 				     micron_8_ecc_get_status)),
+	/* M70A 8Gb 3.3V */
+	SPINAND_INFO("MT29F8G01ADAFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x46),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
+	/* M70A 8Gb 1.8V */
+	SPINAND_INFO("MT29F8G01ADBFD",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x47),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 2),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_CR_FEAT_BIT,
+		     SPINAND_ECCINFO(&micron_8_ooblayout,
+				     micron_8_ecc_get_status),
+		     SPINAND_SELECT_TARGET(micron_select_target)),
 };
 
 static int micron_spinand_init(struct spinand_device *spinand)
-- 
2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply related	[flat|nested] 42+ messages in thread
* RE: [EXT] [PATCH v7 0/6] Add new series Micron SPI NAND devices
  2020-03-11 17:57 ` shiva.linuxworks
@ 2020-03-12 19:16   ` Shivamurthy Shastri (sshivamurthy)
  -1 siblings, 0 replies; 42+ messages in thread
From: Shivamurthy Shastri (sshivamurthy) @ 2020-03-12 19:16 UTC (permalink / raw)
  To: Miquel Raynal
  Cc: Richard Weinberger, Vignesh Raghavendra, Boris Brezillon,
	Frieder Schrempf, Chuanhong Guo, linux-mtd, linux-kernel,
	shiva.linuxworks

Hi Miquel,

I have rebased these patches to nand/next as you suggested.
Please let me know, if there is still a problem.

Thanks,
Shiva

> 
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> This patchset is for the new series of Micron SPI NAND devices, and the
> following links are their datasheets.
> 
> M78A:
> [1] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
> [2] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf
> 
> M79A:
> [3] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
> [4] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf
> 
> M70A:
> [5] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
> [6] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
> [7] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
> [8] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf
> 
> Changes since v6:
> -----------------
> 
> 1. Rebased series to nand/next.
> 2. Added Reviewed-by from Boris.
> 
> Changes since v5:
> -----------------
> 
> 1. Rebased series to v5.6-rc1.
> 
> Changes since v4:
> -----------------
> 
> 1. Patch 2 is separated into two as per the comment by Boris.
> 2. Renamed MICRON_CFG_CONTI_READ into MICRON_CFG_CR.
> 3. Reworked die selection function as per the comment by Boris.
> 
> Changes since v3:
> -----------------
> 
> 1. Patch 3 and 4 reworked as follows
>    - Patch 3 introducing the Continuous read feature
>    - Patch 4 adding devices with the feature
> 
> Changes since v2:
> -----------------
> 
> 1. Patch commit messages have been modified.
> 2. Handled devices with Continuous Read feature with vendor specific flag.
> 3. Reworked die selection function as per the comment.
> 
> Changes since v1:
> -----------------
> 
> 1. The patch split into multiple patches.
> 2. Added comments for selecting the die.
> 
> Shivamurthy Shastri (6):
>   mtd: spinand: micron: Generalize the OOB layout structure and function
>     names
>   mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
>   mtd: spinand: micron: Add new Micron SPI NAND devices
>   mtd: spinand: micron: identify SPI NAND device with Continuous Read
>     mode
>   mtd: spinand: micron: Add M70A series Micron SPI NAND devices
>   mtd: spinand: micron: Add new Micron SPI NAND devices with multiple
>     dies
> 
>  drivers/mtd/nand/spi/micron.c | 158
> +++++++++++++++++++++++++++++++---
>  include/linux/mtd/spinand.h   |   1 +
>  2 files changed, 145 insertions(+), 14 deletions(-)
> 
> --
> 2.17.1


^ permalink raw reply	[flat|nested] 42+ messages in thread
* RE: [EXT] [PATCH v7 0/6] Add new series Micron SPI NAND devices
@ 2020-03-12 19:16   ` Shivamurthy Shastri (sshivamurthy)
  0 siblings, 0 replies; 42+ messages in thread
From: Shivamurthy Shastri (sshivamurthy) @ 2020-03-12 19:16 UTC (permalink / raw)
  To: Miquel Raynal
  Cc: Vignesh Raghavendra, shiva.linuxworks, Richard Weinberger,
	linux-kernel, Frieder Schrempf, Boris Brezillon, linux-mtd,
	Chuanhong Guo

Hi Miquel,

I have rebased these patches to nand/next as you suggested.
Please let me know, if there is still a problem.

Thanks,
Shiva

> 
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> This patchset is for the new series of Micron SPI NAND devices, and the
> following links are their datasheets.
> 
> M78A:
> [1] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m78a_1gb_3v_nand_spi.pdf
> [2] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m78a_1gb_1_8v_nand_spi.pdf
> 
> M79A:
> [3] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m79a_2gb_1_8v_nand_spi.pdf
> [4] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m79a_ddp_4gb_3v_nand_spi.pdf
> 
> M70A:
> [5] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_4gb_3v_nand_spi.pdf
> [6] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_4gb_1_8v_nand_spi.pdf
> [7] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_ddp_8gb_3v_nand_spi.pdf
> [8] https://www.micron.com/~/media/documents/products/data-
> sheet/nand-flash/70-series/m70a_ddp_8gb_1_8v_nand_spi.pdf
> 
> Changes since v6:
> -----------------
> 
> 1. Rebased series to nand/next.
> 2. Added Reviewed-by from Boris.
> 
> Changes since v5:
> -----------------
> 
> 1. Rebased series to v5.6-rc1.
> 
> Changes since v4:
> -----------------
> 
> 1. Patch 2 is separated into two as per the comment by Boris.
> 2. Renamed MICRON_CFG_CONTI_READ into MICRON_CFG_CR.
> 3. Reworked die selection function as per the comment by Boris.
> 
> Changes since v3:
> -----------------
> 
> 1. Patch 3 and 4 reworked as follows
>    - Patch 3 introducing the Continuous read feature
>    - Patch 4 adding devices with the feature
> 
> Changes since v2:
> -----------------
> 
> 1. Patch commit messages have been modified.
> 2. Handled devices with Continuous Read feature with vendor specific flag.
> 3. Reworked die selection function as per the comment.
> 
> Changes since v1:
> -----------------
> 
> 1. The patch split into multiple patches.
> 2. Added comments for selecting the die.
> 
> Shivamurthy Shastri (6):
>   mtd: spinand: micron: Generalize the OOB layout structure and function
>     names
>   mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
>   mtd: spinand: micron: Add new Micron SPI NAND devices
>   mtd: spinand: micron: identify SPI NAND device with Continuous Read
>     mode
>   mtd: spinand: micron: Add M70A series Micron SPI NAND devices
>   mtd: spinand: micron: Add new Micron SPI NAND devices with multiple
>     dies
> 
>  drivers/mtd/nand/spi/micron.c | 158
> +++++++++++++++++++++++++++++++---
>  include/linux/mtd/spinand.h   |   1 +
>  2 files changed, 145 insertions(+), 14 deletions(-)
> 
> --
> 2.17.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [EXT] [PATCH v7 0/6] Add new series Micron SPI NAND devices
  2020-03-12 19:16   ` Shivamurthy Shastri (sshivamurthy)
@ 2020-03-12 19:39     ` Miquel Raynal
  -1 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 19:39 UTC (permalink / raw)
  To: Shivamurthy Shastri (sshivamurthy)
  Cc: Richard Weinberger, Vignesh Raghavendra, Boris Brezillon,
	Frieder Schrempf, Chuanhong Guo, linux-mtd, linux-kernel,
	shiva.linuxworks

Hi Shivamurthy,

"Shivamurthy Shastri (sshivamurthy)" <sshivamurthy@micron.com> wrote on
Thu, 12 Mar 2020 19:16:52 +0000:

> Hi Miquel,
> 
> I have rebased these patches to nand/next as you suggested.
> Please let me know, if there is still a problem.

Everything applies smoothly, it's good, thanks!
Miquèl

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [EXT] [PATCH v7 0/6] Add new series Micron SPI NAND devices
@ 2020-03-12 19:39     ` Miquel Raynal
  0 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 19:39 UTC (permalink / raw)
  To: Shivamurthy Shastri (sshivamurthy)
  Cc: Vignesh Raghavendra, shiva.linuxworks, Richard Weinberger,
	linux-kernel, Frieder Schrempf, Boris Brezillon, linux-mtd,
	Chuanhong Guo

Hi Shivamurthy,

"Shivamurthy Shastri (sshivamurthy)" <sshivamurthy@micron.com> wrote on
Thu, 12 Mar 2020 19:16:52 +0000:

> Hi Miquel,
> 
> I have rebased these patches to nand/next as you suggested.
> Please let me know, if there is still a problem.

Everything applies smoothly, it's good, thanks!
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies
  2020-03-11 17:57   ` shiva.linuxworks
@ 2020-03-12 21:33     ` Miquel Raynal
  -1 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:35 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add device table for new Micron SPI NAND devices, which have multiple
> dies.
> 
> Also, enable support to select the dies.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies
@ 2020-03-12 21:33     ` Miquel Raynal
  0 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:35 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add device table for new Micron SPI NAND devices, which have multiple
> dies.
> 
> Also, enable support to select the dies.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices
  2020-03-11 17:57   ` shiva.linuxworks
@ 2020-03-12 21:33     ` Miquel Raynal
  -1 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:34 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add device table for M70A series Micron SPI NAND devices.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices
@ 2020-03-12 21:33     ` Miquel Raynal
  0 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:34 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add device table for M70A series Micron SPI NAND devices.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode
  2020-03-11 17:57   ` shiva.linuxworks
@ 2020-03-12 21:33     ` Miquel Raynal
  -1 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:33 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add SPINAND_HAS_CR_FEAT_BIT flag to identify the SPI NAND device with
> the Continuous Read mode.
> 
> Some of the Micron SPI NAND devices have the "Continuous Read" feature
> enabled by default, which does not fit the subsystem needs.
> 
> In this mode, the READ CACHE command doesn't require the starting column
> address. The device always output the data starting from the first
> column of the cache register, and once the end of the cache register
> reached, the data output continues through the next page. With the
> continuous read mode, it is possible to read out the entire block using
> a single READ command, and once the end of the block reached, the output
> pins become High-Z state. However, during this mode the read command
> doesn't output the OOB area.
> 
> Hence, we disable the feature at probe time.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode
@ 2020-03-12 21:33     ` Miquel Raynal
  0 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:33 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add SPINAND_HAS_CR_FEAT_BIT flag to identify the SPI NAND device with
> the Continuous Read mode.
> 
> Some of the Micron SPI NAND devices have the "Continuous Read" feature
> enabled by default, which does not fit the subsystem needs.
> 
> In this mode, the READ CACHE command doesn't require the starting column
> address. The device always output the data starting from the first
> column of the cache register, and once the end of the cache register
> reached, the data output continues through the next page. With the
> continuous read mode, it is possible to read out the entire block using
> a single READ command, and once the end of the block reached, the output
> pins become High-Z state. However, during this mode the read command
> doesn't output the OOB area.
> 
> Hence, we disable the feature at probe time.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices
  2020-03-11 17:57   ` shiva.linuxworks
@ 2020-03-12 21:33     ` Miquel Raynal
  -1 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:32 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add device table for M79A and M78A series Micron SPI NAND devices.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices
@ 2020-03-12 21:33     ` Miquel Raynal
  0 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:32 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add device table for M79A and M78A series Micron SPI NAND devices.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
  2020-03-11 17:57   ` shiva.linuxworks
@ 2020-03-12 21:33     ` Miquel Raynal
  -1 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:31 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add the SPI NAND device MT29F2G01ABAGD series number, size and voltage
> details as a comment.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD
@ 2020-03-12 21:33     ` Miquel Raynal
  0 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:31 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> Add the SPI NAND device MT29F2G01ABAGD series number, size and voltage
> details as a comment.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names
  2020-03-11 17:57   ` shiva.linuxworks
@ 2020-03-12 21:33     ` Miquel Raynal
  -1 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:30 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> In order to add new Micron SPI NAND devices, we generalized the OOB
> layout structure and function names.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names
@ 2020-03-12 21:33     ` Miquel Raynal
  0 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-03-12 21:33 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Richard Weinberger,
	Vignesh Raghavendra, Boris Brezillon, Chuanhong Guo,
	Frieder Schrempf, linux-mtd, linux-kernel
  Cc: Shivamurthy Shastri

On Wed, 2020-03-11 at 17:57:30 UTC, shiva.linuxworks@gmail.com wrote:
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
> 
> In order to add new Micron SPI NAND devices, we generalized the OOB
> layout structure and function names.
> 
> Signed-off-by: Shivamurthy Shastri <sshivamurthy@micron.com>
> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>

Applied to https://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux.git nand/next, thanks.

Miquel

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
  2020-03-11 17:57 ` shiva.linuxworks
@ 2020-05-15  5:27   ` Naresh Kamboju
  -1 siblings, 0 replies; 42+ messages in thread
From: Naresh Kamboju @ 2020-05-15  5:27 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Shivamurthy Shastri
  Cc: Richard Weinberger, Vignesh Raghavendra, Boris Brezillon,
	Chuanhong Guo, Frieder Schrempf, linux-mtd, open list,
	Poonam Aggrwal, Suram Suram, lkft-triage

On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:
>
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
>
> This patchset is for the new series of Micron SPI NAND devices, and the
> following links are their datasheets.

While boot NXP ls2088 device with mainline kernel the following
nand warning noticed. How critical this warning ?

[    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
[    1.364085] nand: Micron MT29F16G08ABACAWP
[    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
4096, OOB size: 224
[    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
system is too weak compared to the one required by the NAND chip

[    1.388767] Bad block table found at page 524160, version 0x01
[    1.396833] Bad block table found at page 524032, version 0x01
[    1.403781] nand_read_bbt: bad block at 0x000002d00000
[    1.408921] nand_read_bbt: bad block at 0x000002d80000
[    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
0x530000000, bank 2


Full test log,
https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-rc5-55-g1ae7efb38854/testrun/18254/log

- Naresh

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
@ 2020-05-15  5:27   ` Naresh Kamboju
  0 siblings, 0 replies; 42+ messages in thread
From: Naresh Kamboju @ 2020-05-15  5:27 UTC (permalink / raw)
  To: shiva.linuxworks, Miquel Raynal, Shivamurthy Shastri
  Cc: Poonam Aggrwal, Vignesh Raghavendra, Richard Weinberger,
	open list, Frieder Schrempf, Boris Brezillon, linux-mtd,
	lkft-triage, Suram Suram, Chuanhong Guo

On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:
>
> From: Shivamurthy Shastri <sshivamurthy@micron.com>
>
> This patchset is for the new series of Micron SPI NAND devices, and the
> following links are their datasheets.

While boot NXP ls2088 device with mainline kernel the following
nand warning noticed. How critical this warning ?

[    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
[    1.364085] nand: Micron MT29F16G08ABACAWP
[    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
4096, OOB size: 224
[    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
system is too weak compared to the one required by the NAND chip

[    1.388767] Bad block table found at page 524160, version 0x01
[    1.396833] Bad block table found at page 524032, version 0x01
[    1.403781] nand_read_bbt: bad block at 0x000002d00000
[    1.408921] nand_read_bbt: bad block at 0x000002d80000
[    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
0x530000000, bank 2


Full test log,
https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-rc5-55-g1ae7efb38854/testrun/18254/log

- Naresh

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* RE: [PATCH v7 0/6] Add new series Micron SPI NAND devices
  2020-05-15  5:27   ` Naresh Kamboju
@ 2020-05-15  5:29     ` Poonam Aggrwal
  -1 siblings, 0 replies; 42+ messages in thread
From: Poonam Aggrwal @ 2020-05-15  5:29 UTC (permalink / raw)
  To: Naresh Kamboju, shiva.linuxworks, Miquel Raynal,
	Shivamurthy Shastri, Ashish Kumar
  Cc: Richard Weinberger, Vignesh Raghavendra, Boris Brezillon,
	Chuanhong Guo, Frieder Schrempf, linux-mtd, open list,
	Suram Suram, lkft-triage

Adding Ashish.

Regards
Poonam

> -----Original Message-----
> From: Naresh Kamboju <naresh.kamboju@linaro.org>
> Sent: Friday, May 15, 2020 10:57 AM
> To: shiva.linuxworks@gmail.com; Miquel Raynal <miquel.raynal@bootlin.com>;
> Shivamurthy Shastri <sshivamurthy@micron.com>
> Cc: Richard Weinberger <richard@nod.at>; Vignesh Raghavendra
> <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>;
> Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf
> <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open list <linux-
> kernel@vger.kernel.org>; Poonam Aggrwal <poonam.aggrwal@nxp.com>;
> Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
> Subject: Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> 
> On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:
> >
> > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> >
> > This patchset is for the new series of Micron SPI NAND devices, and
> > the following links are their datasheets.
> 
> While boot NXP ls2088 device with mainline kernel the following nand warning
> noticed. How critical this warning ?
> 
> [    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> [    1.364085] nand: Micron MT29F16G08ABACAWP
> [    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> 4096, OOB size: 224
> [    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
> system is too weak compared to the one required by the NAND chip
> 
> [    1.388767] Bad block table found at page 524160, version 0x01
> [    1.396833] Bad block table found at page 524032, version 0x01
> [    1.403781] nand_read_bbt: bad block at 0x000002d00000
> [    1.408921] nand_read_bbt: bad block at 0x000002d80000
> [    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
> 0x530000000, bank 2
> 
> 
> Full test log,
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fqa-
> reports.linaro.org%2Flkft%2Flinux-mainline-oe%2Fbuild%2Fv5.7-rc5-55-
> g1ae7efb38854%2Ftestrun%2F18254%2Flog&amp;data=02%7C01%7Cpoonam.
> aggrwal%40nxp.com%7C146f634c869f4c70baa108d7f8909ffb%7C686ea1d3bc2
> b4c6fa92cd99c5c301635%7C0%7C0%7C637251172354638298&amp;sdata=%2B
> Jhs%2Fb92%2BA56WzYdHe%2BBhXWfjk8feCGAFv%2BRzFKC9PM%3D&amp;rese
> rved=0
> 
> - Naresh

^ permalink raw reply	[flat|nested] 42+ messages in thread
* RE: [PATCH v7 0/6] Add new series Micron SPI NAND devices
@ 2020-05-15  5:29     ` Poonam Aggrwal
  0 siblings, 0 replies; 42+ messages in thread
From: Poonam Aggrwal @ 2020-05-15  5:29 UTC (permalink / raw)
  To: Naresh Kamboju, shiva.linuxworks, Miquel Raynal,
	Shivamurthy Shastri, Ashish Kumar
  Cc: Vignesh Raghavendra, Richard Weinberger, open list,
	Frieder Schrempf, Boris Brezillon, linux-mtd, lkft-triage,
	Suram Suram, Chuanhong Guo

Adding Ashish.

Regards
Poonam

> -----Original Message-----
> From: Naresh Kamboju <naresh.kamboju@linaro.org>
> Sent: Friday, May 15, 2020 10:57 AM
> To: shiva.linuxworks@gmail.com; Miquel Raynal <miquel.raynal@bootlin.com>;
> Shivamurthy Shastri <sshivamurthy@micron.com>
> Cc: Richard Weinberger <richard@nod.at>; Vignesh Raghavendra
> <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>;
> Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf
> <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open list <linux-
> kernel@vger.kernel.org>; Poonam Aggrwal <poonam.aggrwal@nxp.com>;
> Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
> Subject: Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> 
> On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:
> >
> > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> >
> > This patchset is for the new series of Micron SPI NAND devices, and
> > the following links are their datasheets.
> 
> While boot NXP ls2088 device with mainline kernel the following nand warning
> noticed. How critical this warning ?
> 
> [    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> [    1.364085] nand: Micron MT29F16G08ABACAWP
> [    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> 4096, OOB size: 224
> [    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
> system is too weak compared to the one required by the NAND chip
> 
> [    1.388767] Bad block table found at page 524160, version 0x01
> [    1.396833] Bad block table found at page 524032, version 0x01
> [    1.403781] nand_read_bbt: bad block at 0x000002d00000
> [    1.408921] nand_read_bbt: bad block at 0x000002d80000
> [    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
> 0x530000000, bank 2
> 
> 
> Full test log,
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fqa-
> reports.linaro.org%2Flkft%2Flinux-mainline-oe%2Fbuild%2Fv5.7-rc5-55-
> g1ae7efb38854%2Ftestrun%2F18254%2Flog&amp;data=02%7C01%7Cpoonam.
> aggrwal%40nxp.com%7C146f634c869f4c70baa108d7f8909ffb%7C686ea1d3bc2
> b4c6fa92cd99c5c301635%7C0%7C0%7C637251172354638298&amp;sdata=%2B
> Jhs%2Fb92%2BA56WzYdHe%2BBhXWfjk8feCGAFv%2BRzFKC9PM%3D&amp;rese
> rved=0
> 
> - Naresh
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
  2020-05-15  5:29     ` Poonam Aggrwal
@ 2020-05-15  7:33       ` Miquel Raynal
  -1 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-05-15  7:33 UTC (permalink / raw)
  To: Poonam Aggrwal
  Cc: Naresh Kamboju, shiva.linuxworks, Shivamurthy Shastri,
	Ashish Kumar, Richard Weinberger, Vignesh Raghavendra,
	Boris Brezillon, Chuanhong Guo, Frieder Schrempf, linux-mtd,
	open list, Suram Suram, lkft-triage

Hi Poonam,

Poonam Aggrwal <poonam.aggrwal@nxp.com> wrote on Fri, 15 May 2020
05:29:07 +0000:

> Adding Ashish.
> 
> Regards
> Poonam
> 
> > -----Original Message-----
> > From: Naresh Kamboju <naresh.kamboju@linaro.org>
> > Sent: Friday, May 15, 2020 10:57 AM
> > To: shiva.linuxworks@gmail.com; Miquel Raynal <miquel.raynal@bootlin.com>;
> > Shivamurthy Shastri <sshivamurthy@micron.com>
> > Cc: Richard Weinberger <richard@nod.at>; Vignesh Raghavendra
> > <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>;
> > Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf
> > <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open list <linux-  
> > kernel@vger.kernel.org>; Poonam Aggrwal <poonam.aggrwal@nxp.com>;  
> > Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
> > Subject: Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> > 
> > On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:  
> > >
> > > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> > >
> > > This patchset is for the new series of Micron SPI NAND devices, and
> > > the following links are their datasheets.  
> > 
> > While boot NXP ls2088 device with mainline kernel the following nand warning
> > noticed. How critical this warning ?

Are you sure this is the right thread? Shivamurthy added SPI-NAND
support, you are talking about a raw NAND device.
> > 
> > [    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> > [    1.364085] nand: Micron MT29F16G08ABACAWP
> > [    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> > 4096, OOB size: 224
> > [    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
> > system is too weak compared to the one required by the NAND chip

If you are talking about this one, it is pretty self explanatory: the
NAND chip requires a minimum correction which is not achieved here.
Either because the ECC engine cannot reach the requested amount (you
cannot do anything) or because you requested a too low correction with
DT properties.

> > 
> > [    1.388767] Bad block table found at page 524160, version 0x01
> > [    1.396833] Bad block table found at page 524032, version 0x01
> > [    1.403781] nand_read_bbt: bad block at 0x000002d00000
> > [    1.408921] nand_read_bbt: bad block at 0x000002d80000
> > [    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
> > 0x530000000, bank 2
> > 
> > 
> > Full test log,
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fqa-
> > reports.linaro.org%2Flkft%2Flinux-mainline-oe%2Fbuild%2Fv5.7-rc5-55-
> > g1ae7efb38854%2Ftestrun%2F18254%2Flog&amp;data=02%7C01%7Cpoonam.
> > aggrwal%40nxp.com%7C146f634c869f4c70baa108d7f8909ffb%7C686ea1d3bc2
> > b4c6fa92cd99c5c301635%7C0%7C0%7C637251172354638298&amp;sdata=%2B
> > Jhs%2Fb92%2BA56WzYdHe%2BBhXWfjk8feCGAFv%2BRzFKC9PM%3D&amp;rese
> > rved=0
> > 
> > - Naresh  

Thanks,
Miquèl

^ permalink raw reply	[flat|nested] 42+ messages in thread
* Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
@ 2020-05-15  7:33       ` Miquel Raynal
  0 siblings, 0 replies; 42+ messages in thread
From: Miquel Raynal @ 2020-05-15  7:33 UTC (permalink / raw)
  To: Poonam Aggrwal
  Cc: Vignesh Raghavendra, shiva.linuxworks, Richard Weinberger,
	Naresh Kamboju, Ashish Kumar, Frieder Schrempf, open list,
	Boris Brezillon, linux-mtd, lkft-triage, Suram Suram,
	Chuanhong Guo, Shivamurthy Shastri

Hi Poonam,

Poonam Aggrwal <poonam.aggrwal@nxp.com> wrote on Fri, 15 May 2020
05:29:07 +0000:

> Adding Ashish.
> 
> Regards
> Poonam
> 
> > -----Original Message-----
> > From: Naresh Kamboju <naresh.kamboju@linaro.org>
> > Sent: Friday, May 15, 2020 10:57 AM
> > To: shiva.linuxworks@gmail.com; Miquel Raynal <miquel.raynal@bootlin.com>;
> > Shivamurthy Shastri <sshivamurthy@micron.com>
> > Cc: Richard Weinberger <richard@nod.at>; Vignesh Raghavendra
> > <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>;
> > Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf
> > <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open list <linux-  
> > kernel@vger.kernel.org>; Poonam Aggrwal <poonam.aggrwal@nxp.com>;  
> > Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
> > Subject: Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> > 
> > On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:  
> > >
> > > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> > >
> > > This patchset is for the new series of Micron SPI NAND devices, and
> > > the following links are their datasheets.  
> > 
> > While boot NXP ls2088 device with mainline kernel the following nand warning
> > noticed. How critical this warning ?

Are you sure this is the right thread? Shivamurthy added SPI-NAND
support, you are talking about a raw NAND device.
> > 
> > [    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> > [    1.364085] nand: Micron MT29F16G08ABACAWP
> > [    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> > 4096, OOB size: 224
> > [    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
> > system is too weak compared to the one required by the NAND chip

If you are talking about this one, it is pretty self explanatory: the
NAND chip requires a minimum correction which is not achieved here.
Either because the ECC engine cannot reach the requested amount (you
cannot do anything) or because you requested a too low correction with
DT properties.

> > 
> > [    1.388767] Bad block table found at page 524160, version 0x01
> > [    1.396833] Bad block table found at page 524032, version 0x01
> > [    1.403781] nand_read_bbt: bad block at 0x000002d00000
> > [    1.408921] nand_read_bbt: bad block at 0x000002d80000
> > [    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
> > 0x530000000, bank 2
> > 
> > 
> > Full test log,
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fqa-
> > reports.linaro.org%2Flkft%2Flinux-mainline-oe%2Fbuild%2Fv5.7-rc5-55-
> > g1ae7efb38854%2Ftestrun%2F18254%2Flog&amp;data=02%7C01%7Cpoonam.
> > aggrwal%40nxp.com%7C146f634c869f4c70baa108d7f8909ffb%7C686ea1d3bc2
> > b4c6fa92cd99c5c301635%7C0%7C0%7C637251172354638298&amp;sdata=%2B
> > Jhs%2Fb92%2BA56WzYdHe%2BBhXWfjk8feCGAFv%2BRzFKC9PM%3D&amp;rese
> > rved=0
> > 
> > - Naresh  

Thanks,
Miquèl

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
  2020-05-15  7:33       ` Miquel Raynal
@ 2020-05-15  9:59         ` Shivamurthy Shastri (sshivamurthy)
  -1 siblings, 0 replies; 42+ messages in thread
From: Shivamurthy Shastri (sshivamurthy) @ 2020-05-15  9:59 UTC (permalink / raw)
  To: Poonam Aggrwal, Naresh Kamboju
  Cc: Miquel Raynal, shiva.linuxworks, Ashish Kumar,
	Richard Weinberger, Vignesh Raghavendra, Boris Brezillon,
	Chuanhong Guo, Frieder Schrempf, linux-mtd, open list,
	Suram Suram, lkft-triage

Hi Naresh and Poonam,

> Subject: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> 
> Hi Poonam,
> 
> Poonam Aggrwal <poonam.aggrwal@nxp.com> wrote on Fri, 15 May 2020
> 05:29:07 +0000:
> 
> > Adding Ashish.
> >
> > Regards
> > Poonam
> >
> > > -----Original Message-----
> > > From: Naresh Kamboju <naresh.kamboju@linaro.org>
> > > Sent: Friday, May 15, 2020 10:57 AM
> > > To: shiva.linuxworks@gmail.com; Miquel Raynal
> <miquel.raynal@bootlin.com>;
> > > Shivamurthy Shastri <sshivamurthy@micron.com>
> > > Cc: Richard Weinberger <richard@nod.at>; Vignesh Raghavendra
> > > <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>;
> > > Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf
> > > <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open
> list <linux-
> > > kernel@vger.kernel.org>; Poonam Aggrwal
> <poonam.aggrwal@nxp.com>;
> > > Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
> > > Subject: Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> > >
> > > On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:
> > > >
> > > > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> > > >
> > > > This patchset is for the new series of Micron SPI NAND devices, and
> > > > the following links are their datasheets.
> > >
> > > While boot NXP ls2088 device with mainline kernel the following nand
> warning
> > > noticed. How critical this warning ?
> 
> Are you sure this is the right thread? Shivamurthy added SPI-NAND
> support, you are talking about a raw NAND device.
> > >
> > > [    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> > > [    1.364085] nand: Micron MT29F16G08ABACAWP
> > > [    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> > > 4096, OOB size: 224
> > > [    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
> > > system is too weak compared to the one required by the NAND chip
> 
> If you are talking about this one, it is pretty self explanatory: the
> NAND chip requires a minimum correction which is not achieved here.
> Either because the ECC engine cannot reach the requested amount (you
> cannot do anything) or because you requested a too low correction with
> DT properties.
> 

Minimum required ECC for this device is 8-bit. Below is the datasheet for your reference.

https://www.micron.com/-/media/client/global/documents/products/data-sheet/nand-flash/70-series/m72a_production_datasheet_revg.pdf?rev=bb0a4ba04a1f40f98e29dc624d178dd8


> > >
> > > [    1.388767] Bad block table found at page 524160, version 0x01
> > > [    1.396833] Bad block table found at page 524032, version 0x01
> > > [    1.403781] nand_read_bbt: bad block at 0x000002d00000
> > > [    1.408921] nand_read_bbt: bad block at 0x000002d80000
> > > [    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
> > > 0x530000000, bank 2
> > >
> > >
> > > Full test log,
> > >
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fqa-
> > > reports.linaro.org%2Flkft%2Flinux-mainline-oe%2Fbuild%2Fv5.7-rc5-55-
> > >
> g1ae7efb38854%2Ftestrun%2F18254%2Flog&amp;data=02%7C01%7Cpoona
> m.
> > >
> aggrwal%40nxp.com%7C146f634c869f4c70baa108d7f8909ffb%7C686ea1d3bc
> 2
> > >
> b4c6fa92cd99c5c301635%7C0%7C0%7C637251172354638298&amp;sdata=%2B
> > >
> Jhs%2Fb92%2BA56WzYdHe%2BBhXWfjk8feCGAFv%2BRzFKC9PM%3D&amp;r
> ese
> > > rved=0
> > >
> > > - Naresh
> 
> Thanks,
> Miquèl

Thanks,
Shiva

^ permalink raw reply	[flat|nested] 42+ messages in thread
* RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
@ 2020-05-15  9:59         ` Shivamurthy Shastri (sshivamurthy)
  0 siblings, 0 replies; 42+ messages in thread
From: Shivamurthy Shastri (sshivamurthy) @ 2020-05-15  9:59 UTC (permalink / raw)
  To: Poonam Aggrwal, Naresh Kamboju
  Cc: Vignesh Raghavendra, shiva.linuxworks, Richard Weinberger,
	Ashish Kumar, Frieder Schrempf, open list, Boris Brezillon,
	linux-mtd, lkft-triage, Miquel Raynal, Suram Suram,
	Chuanhong Guo

Hi Naresh and Poonam,

> Subject: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> 
> Hi Poonam,
> 
> Poonam Aggrwal <poonam.aggrwal@nxp.com> wrote on Fri, 15 May 2020
> 05:29:07 +0000:
> 
> > Adding Ashish.
> >
> > Regards
> > Poonam
> >
> > > -----Original Message-----
> > > From: Naresh Kamboju <naresh.kamboju@linaro.org>
> > > Sent: Friday, May 15, 2020 10:57 AM
> > > To: shiva.linuxworks@gmail.com; Miquel Raynal
> <miquel.raynal@bootlin.com>;
> > > Shivamurthy Shastri <sshivamurthy@micron.com>
> > > Cc: Richard Weinberger <richard@nod.at>; Vignesh Raghavendra
> > > <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>;
> > > Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf
> > > <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open
> list <linux-
> > > kernel@vger.kernel.org>; Poonam Aggrwal
> <poonam.aggrwal@nxp.com>;
> > > Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
> > > Subject: Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> > >
> > > On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:
> > > >
> > > > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> > > >
> > > > This patchset is for the new series of Micron SPI NAND devices, and
> > > > the following links are their datasheets.
> > >
> > > While boot NXP ls2088 device with mainline kernel the following nand
> warning
> > > noticed. How critical this warning ?
> 
> Are you sure this is the right thread? Shivamurthy added SPI-NAND
> support, you are talking about a raw NAND device.
> > >
> > > [    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> > > [    1.364085] nand: Micron MT29F16G08ABACAWP
> > > [    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> > > 4096, OOB size: 224
> > > [    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
> > > system is too weak compared to the one required by the NAND chip
> 
> If you are talking about this one, it is pretty self explanatory: the
> NAND chip requires a minimum correction which is not achieved here.
> Either because the ECC engine cannot reach the requested amount (you
> cannot do anything) or because you requested a too low correction with
> DT properties.
> 

Minimum required ECC for this device is 8-bit. Below is the datasheet for your reference.

https://www.micron.com/-/media/client/global/documents/products/data-sheet/nand-flash/70-series/m72a_production_datasheet_revg.pdf?rev=bb0a4ba04a1f40f98e29dc624d178dd8


> > >
> > > [    1.388767] Bad block table found at page 524160, version 0x01
> > > [    1.396833] Bad block table found at page 524032, version 0x01
> > > [    1.403781] nand_read_bbt: bad block at 0x000002d00000
> > > [    1.408921] nand_read_bbt: bad block at 0x000002d80000
> > > [    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
> > > 0x530000000, bank 2
> > >
> > >
> > > Full test log,
> > >
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fqa-
> > > reports.linaro.org%2Flkft%2Flinux-mainline-oe%2Fbuild%2Fv5.7-rc5-55-
> > >
> g1ae7efb38854%2Ftestrun%2F18254%2Flog&amp;data=02%7C01%7Cpoona
> m.
> > >
> aggrwal%40nxp.com%7C146f634c869f4c70baa108d7f8909ffb%7C686ea1d3bc
> 2
> > >
> b4c6fa92cd99c5c301635%7C0%7C0%7C637251172354638298&amp;sdata=%2B
> > >
> Jhs%2Fb92%2BA56WzYdHe%2BBhXWfjk8feCGAFv%2BRzFKC9PM%3D&amp;r
> ese
> > > rved=0
> > >
> > > - Naresh
> 
> Thanks,
> Miquèl

Thanks,
Shiva
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
  2020-05-15  9:59         ` Shivamurthy Shastri (sshivamurthy)
@ 2020-05-15 10:02           ` Suram Suram
  -1 siblings, 0 replies; 42+ messages in thread
From: Suram Suram @ 2020-05-15 10:02 UTC (permalink / raw)
  To: Shivamurthy Shastri (sshivamurthy),
	Poonam Aggrwal, Naresh Kamboju, X.f. Ren
  Cc: Miquel Raynal, shiva.linuxworks, Ashish Kumar,
	Richard Weinberger, Vignesh Raghavendra, Boris Brezillon,
	Chuanhong Guo, Frieder Schrempf, linux-mtd, open list,
	lkft-triage

+Ron who owns the test on this platform in NXP.

-----Original Message-----
From: Shivamurthy Shastri (sshivamurthy) <sshivamurthy@micron.com> 
Sent: Friday, May 15, 2020 3:29 PM
To: Poonam Aggrwal <poonam.aggrwal@nxp.com>; Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>; shiva.linuxworks@gmail.com; Ashish Kumar <ashish.kumar@nxp.com>; Richard Weinberger <richard@nod.at>; Vignesh Raghavendra <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>; Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open list <linux-kernel@vger.kernel.org>; Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
Subject: RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices

Caution: EXT Email

Hi Naresh and Poonam,

> Subject: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND 
> devices
>
> Hi Poonam,
>
> Poonam Aggrwal <poonam.aggrwal@nxp.com> wrote on Fri, 15 May 2020
> 05:29:07 +0000:
>
> > Adding Ashish.
> >
> > Regards
> > Poonam
> >
> > > -----Original Message-----
> > > From: Naresh Kamboju <naresh.kamboju@linaro.org>
> > > Sent: Friday, May 15, 2020 10:57 AM
> > > To: shiva.linuxworks@gmail.com; Miquel Raynal
> <miquel.raynal@bootlin.com>;
> > > Shivamurthy Shastri <sshivamurthy@micron.com>
> > > Cc: Richard Weinberger <richard@nod.at>; Vignesh Raghavendra 
> > > <vigneshr@ti.com>; Boris Brezillon 
> > > <boris.brezillon@collabora.com>; Chuanhong Guo 
> > > <gch981213@gmail.com>; Frieder Schrempf 
> > > <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open
> list <linux-
> > > kernel@vger.kernel.org>; Poonam Aggrwal
> <poonam.aggrwal@nxp.com>;
> > > Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
> > > Subject: Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> > >
> > > On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:
> > > >
> > > > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> > > >
> > > > This patchset is for the new series of Micron SPI NAND devices, 
> > > > and the following links are their datasheets.
> > >
> > > While boot NXP ls2088 device with mainline kernel the following 
> > > nand
> warning
> > > noticed. How critical this warning ?
>
> Are you sure this is the right thread? Shivamurthy added SPI-NAND 
> support, you are talking about a raw NAND device.
> > >
> > > [    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> > > [    1.364085] nand: Micron MT29F16G08ABACAWP
> > > [    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> > > 4096, OOB size: 224
> > > [    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
> > > system is too weak compared to the one required by the NAND chip
>
> If you are talking about this one, it is pretty self explanatory: the 
> NAND chip requires a minimum correction which is not achieved here.
> Either because the ECC engine cannot reach the requested amount (you 
> cannot do anything) or because you requested a too low correction with 
> DT properties.
>

Minimum required ECC for this device is 8-bit. Below is the datasheet for your reference.

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.micron.com%2F-%2Fmedia%2Fclient%2Fglobal%2Fdocuments%2Fproducts%2Fdata-sheet%2Fnand-flash%2F70-series%2Fm72a_production_datasheet_revg.pdf%3Frev%3Dbb0a4ba04a1f40f98e29dc624d178dd8&amp;data=02%7C01%7Csuram%40nxp.com%7Cf699d2102f954d4d3bd208d7f8b69d35%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637251335518803010&amp;sdata=1HP9Nx2mpttYGyURYB8t1hRsLOX6cBi05wnq8tiok64%3D&amp;reserved=0


> > >
> > > [    1.388767] Bad block table found at page 524160, version 0x01
> > > [    1.396833] Bad block table found at page 524032, version 0x01
> > > [    1.403781] nand_read_bbt: bad block at 0x000002d00000
> > > [    1.408921] nand_read_bbt: bad block at 0x000002d80000
> > > [    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
> > > 0x530000000, bank 2
> > >
> > >
> > > Full test log,
> > >
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fqa-
> > > reports.linaro.org%2Flkft%2Flinux-mainline-oe%2Fbuild%2Fv5.7-rc5-5
> > > 5-
> > >
> g1ae7efb38854%2Ftestrun%2F18254%2Flog&amp;data=02%7C01%7Cpoona
> m.
> > >
> aggrwal%40nxp.com%7C146f634c869f4c70baa108d7f8909ffb%7C686ea1d3bc
> 2
> > >
> b4c6fa92cd99c5c301635%7C0%7C0%7C637251172354638298&amp;sdata=%2B
> > >
> Jhs%2Fb92%2BA56WzYdHe%2BBhXWfjk8feCGAFv%2BRzFKC9PM%3D&amp;r
> ese
> > > rved=0
> > >
> > > - Naresh
>
> Thanks,
> Miquèl

Thanks,
Shiva

^ permalink raw reply	[flat|nested] 42+ messages in thread
* RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
@ 2020-05-15 10:02           ` Suram Suram
  0 siblings, 0 replies; 42+ messages in thread
From: Suram Suram @ 2020-05-15 10:02 UTC (permalink / raw)
  To: Shivamurthy Shastri (sshivamurthy),
	Poonam Aggrwal, Naresh Kamboju, X.f. Ren
  Cc: Vignesh Raghavendra, shiva.linuxworks, Richard Weinberger,
	Ashish Kumar, Frieder Schrempf, open list, Boris Brezillon,
	linux-mtd, lkft-triage, Miquel Raynal, Chuanhong Guo

+Ron who owns the test on this platform in NXP.

-----Original Message-----
From: Shivamurthy Shastri (sshivamurthy) <sshivamurthy@micron.com> 
Sent: Friday, May 15, 2020 3:29 PM
To: Poonam Aggrwal <poonam.aggrwal@nxp.com>; Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>; shiva.linuxworks@gmail.com; Ashish Kumar <ashish.kumar@nxp.com>; Richard Weinberger <richard@nod.at>; Vignesh Raghavendra <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>; Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open list <linux-kernel@vger.kernel.org>; Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
Subject: RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices

Caution: EXT Email

Hi Naresh and Poonam,

> Subject: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND 
> devices
>
> Hi Poonam,
>
> Poonam Aggrwal <poonam.aggrwal@nxp.com> wrote on Fri, 15 May 2020
> 05:29:07 +0000:
>
> > Adding Ashish.
> >
> > Regards
> > Poonam
> >
> > > -----Original Message-----
> > > From: Naresh Kamboju <naresh.kamboju@linaro.org>
> > > Sent: Friday, May 15, 2020 10:57 AM
> > > To: shiva.linuxworks@gmail.com; Miquel Raynal
> <miquel.raynal@bootlin.com>;
> > > Shivamurthy Shastri <sshivamurthy@micron.com>
> > > Cc: Richard Weinberger <richard@nod.at>; Vignesh Raghavendra 
> > > <vigneshr@ti.com>; Boris Brezillon 
> > > <boris.brezillon@collabora.com>; Chuanhong Guo 
> > > <gch981213@gmail.com>; Frieder Schrempf 
> > > <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open
> list <linux-
> > > kernel@vger.kernel.org>; Poonam Aggrwal
> <poonam.aggrwal@nxp.com>;
> > > Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
> > > Subject: Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> > >
> > > On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:
> > > >
> > > > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> > > >
> > > > This patchset is for the new series of Micron SPI NAND devices, 
> > > > and the following links are their datasheets.
> > >
> > > While boot NXP ls2088 device with mainline kernel the following 
> > > nand
> warning
> > > noticed. How critical this warning ?
>
> Are you sure this is the right thread? Shivamurthy added SPI-NAND 
> support, you are talking about a raw NAND device.
> > >
> > > [    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> > > [    1.364085] nand: Micron MT29F16G08ABACAWP
> > > [    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> > > 4096, OOB size: 224
> > > [    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
> > > system is too weak compared to the one required by the NAND chip
>
> If you are talking about this one, it is pretty self explanatory: the 
> NAND chip requires a minimum correction which is not achieved here.
> Either because the ECC engine cannot reach the requested amount (you 
> cannot do anything) or because you requested a too low correction with 
> DT properties.
>

Minimum required ECC for this device is 8-bit. Below is the datasheet for your reference.

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.micron.com%2F-%2Fmedia%2Fclient%2Fglobal%2Fdocuments%2Fproducts%2Fdata-sheet%2Fnand-flash%2F70-series%2Fm72a_production_datasheet_revg.pdf%3Frev%3Dbb0a4ba04a1f40f98e29dc624d178dd8&amp;data=02%7C01%7Csuram%40nxp.com%7Cf699d2102f954d4d3bd208d7f8b69d35%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637251335518803010&amp;sdata=1HP9Nx2mpttYGyURYB8t1hRsLOX6cBi05wnq8tiok64%3D&amp;reserved=0


> > >
> > > [    1.388767] Bad block table found at page 524160, version 0x01
> > > [    1.396833] Bad block table found at page 524032, version 0x01
> > > [    1.403781] nand_read_bbt: bad block at 0x000002d00000
> > > [    1.408921] nand_read_bbt: bad block at 0x000002d80000
> > > [    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
> > > 0x530000000, bank 2
> > >
> > >
> > > Full test log,
> > >
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fqa-
> > > reports.linaro.org%2Flkft%2Flinux-mainline-oe%2Fbuild%2Fv5.7-rc5-5
> > > 5-
> > >
> g1ae7efb38854%2Ftestrun%2F18254%2Flog&amp;data=02%7C01%7Cpoona
> m.
> > >
> aggrwal%40nxp.com%7C146f634c869f4c70baa108d7f8909ffb%7C686ea1d3bc
> 2
> > >
> b4c6fa92cd99c5c301635%7C0%7C0%7C637251172354638298&amp;sdata=%2B
> > >
> Jhs%2Fb92%2BA56WzYdHe%2BBhXWfjk8feCGAFv%2BRzFKC9PM%3D&amp;r
> ese
> > > rved=0
> > >
> > > - Naresh
>
> Thanks,
> Miquèl

Thanks,
Shiva
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
* RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
  2020-05-15 10:02           ` Suram Suram
@ 2020-05-15 10:13             ` X.f. Ren
  -1 siblings, 0 replies; 42+ messages in thread
From: X.f. Ren @ 2020-05-15 10:13 UTC (permalink / raw)
  To: Suram Suram, Shivamurthy Shastri (sshivamurthy),
	Poonam Aggrwal, Naresh Kamboju
  Cc: Miquel Raynal, shiva.linuxworks, Ashish Kumar,
	Richard Weinberger, Vignesh Raghavendra, Boris Brezillon,
	Chuanhong Guo, Frieder Schrempf, linux-mtd, open list,
	lkft-triage

Hello Suram, et al
Here are some information about those warming. Those warning should not impact testing.  
"
It is in the nature of NAND Flash that a small proportion of the blocks in the device are defective and therefore unusable from the day of manufacture (typically up to 1% is deemed acceptable by the manufacturer). Manufacturers perform thorough testing to identify any potentially bad blocks. When they have been identified, bad blocks are marked with a special marker in the OOB area of the block. This is the Manufacturer's Bad Block Marker (MBBM).

RAM resident BBT
RAM-resident BBTs are volatile and must be recreated every time the system is booted. The process involves scanning each block in the NAND device to check for bad block markers.

The main advantage of this approach is simplicity. This is particularly true for manufacturability, where is is possible for a generic NAND programmer to program pre-prepared images without the need to understand the underlying ECC scheme or any BBT formats.

There are, however, a number of disadvantages. In some cases these disadvantages preclude the use of RAM-resident BBTs.
NAND resident BBT
The use of NAND-Resident BBTs overcomes many of the issues associated with RAM-resident BBTs. For most cases this is the recommended method for recording and tracking bad blocks.

As a NAND-resident BBT is non-volatile, it is preserved across system boots. There should never be any reason to recreate the BBT by scanning the NAND device for bad block markers.

Typically, the BBT requires two bits of storage for each block. The table is stored in the last good block with a backup in the penultimate good block. By default, the last four physical blocks are reserved for BBTs. If there are fewer than two good blocks available in the last four, then the NAND device should be discarded.

In a ideal situation, the BBT should be built and written to Flash before any other data. This is mandatory in cases where it is not possible to use the ECC tags to distinguish between valid programmed ECC data and an MBBM. However, this has implications for manufacturability, as the NAND programmer needs to be taught how to write the BBT, including the relevant ECC scheme.

In some cases, it may be appropriate for the NAND Programmer to skip writing BBTs, and to defer BBT creation to the software drivers when the system is first booted. This avoids the complexities of customising the NAND Programmer, whilst retaining the benefits of using NAND-resident BBTs. This approach is only viable if there is no clash between the ECC layout and the MBBM location, or where ECC tags can be used to avoid ECC data being misinterpreted as a MBBM.
"


Best Regards
Ron

-----Original Message-----
From: Suram Suram <suram@nxp.com> 
Sent: 2020年5月15日 18:02
To: Shivamurthy Shastri (sshivamurthy) <sshivamurthy@micron.com>; Poonam Aggrwal <poonam.aggrwal@nxp.com>; Naresh Kamboju <naresh.kamboju@linaro.org>; X.f. Ren <xiaofeng.ren@nxp.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>; shiva.linuxworks@gmail.com; Ashish Kumar <ashish.kumar@nxp.com>; Richard Weinberger <richard@nod.at>; Vignesh Raghavendra <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>; Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open list <linux-kernel@vger.kernel.org>; lkft-triage@lists.linaro.org
Subject: RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices

+Ron who owns the test on this platform in NXP.

-----Original Message-----
From: Shivamurthy Shastri (sshivamurthy) <sshivamurthy@micron.com>
Sent: Friday, May 15, 2020 3:29 PM
To: Poonam Aggrwal <poonam.aggrwal@nxp.com>; Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>; shiva.linuxworks@gmail.com; Ashish Kumar <ashish.kumar@nxp.com>; Richard Weinberger <richard@nod.at>; Vignesh Raghavendra <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>; Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open list <linux-kernel@vger.kernel.org>; Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
Subject: RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices

Caution: EXT Email

Hi Naresh and Poonam,

> Subject: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND 
> devices
>
> Hi Poonam,
>
> Poonam Aggrwal <poonam.aggrwal@nxp.com> wrote on Fri, 15 May 2020
> 05:29:07 +0000:
>
> > Adding Ashish.
> >
> > Regards
> > Poonam
> >
> > > -----Original Message-----
> > > From: Naresh Kamboju <naresh.kamboju@linaro.org>
> > > Sent: Friday, May 15, 2020 10:57 AM
> > > To: shiva.linuxworks@gmail.com; Miquel Raynal
> <miquel.raynal@bootlin.com>;
> > > Shivamurthy Shastri <sshivamurthy@micron.com>
> > > Cc: Richard Weinberger <richard@nod.at>; Vignesh Raghavendra 
> > > <vigneshr@ti.com>; Boris Brezillon 
> > > <boris.brezillon@collabora.com>; Chuanhong Guo 
> > > <gch981213@gmail.com>; Frieder Schrempf 
> > > <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open
> list <linux-
> > > kernel@vger.kernel.org>; Poonam Aggrwal
> <poonam.aggrwal@nxp.com>;
> > > Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
> > > Subject: Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> > >
> > > On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:
> > > >
> > > > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> > > >
> > > > This patchset is for the new series of Micron SPI NAND devices, 
> > > > and the following links are their datasheets.
> > >
> > > While boot NXP ls2088 device with mainline kernel the following 
> > > nand
> warning
> > > noticed. How critical this warning ?
>
> Are you sure this is the right thread? Shivamurthy added SPI-NAND 
> support, you are talking about a raw NAND device.
> > >
> > > [    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> > > [    1.364085] nand: Micron MT29F16G08ABACAWP
> > > [    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> > > 4096, OOB size: 224
> > > [    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
> > > system is too weak compared to the one required by the NAND chip
>
> If you are talking about this one, it is pretty self explanatory: the 
> NAND chip requires a minimum correction which is not achieved here.
> Either because the ECC engine cannot reach the requested amount (you 
> cannot do anything) or because you requested a too low correction with 
> DT properties.
>

Minimum required ECC for this device is 8-bit. Below is the datasheet for your reference.

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.micron.com%2F-%2Fmedia%2Fclient%2Fglobal%2Fdocuments%2Fproducts%2Fdata-sheet%2Fnand-flash%2F70-series%2Fm72a_production_datasheet_revg.pdf%3Frev%3Dbb0a4ba04a1f40f98e29dc624d178dd8&amp;data=02%7C01%7Csuram%40nxp.com%7Cf699d2102f954d4d3bd208d7f8b69d35%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637251335518803010&amp;sdata=1HP9Nx2mpttYGyURYB8t1hRsLOX6cBi05wnq8tiok64%3D&amp;reserved=0


> > >
> > > [    1.388767] Bad block table found at page 524160, version 0x01
> > > [    1.396833] Bad block table found at page 524032, version 0x01
> > > [    1.403781] nand_read_bbt: bad block at 0x000002d00000
> > > [    1.408921] nand_read_bbt: bad block at 0x000002d80000
> > > [    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
> > > 0x530000000, bank 2
> > >
> > >
> > > Full test log,
> > >
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fqa-
> > > reports.linaro.org%2Flkft%2Flinux-mainline-oe%2Fbuild%2Fv5.7-rc5-5
> > > 5-
> > >
> g1ae7efb38854%2Ftestrun%2F18254%2Flog&amp;data=02%7C01%7Cpoona
> m.
> > >
> aggrwal%40nxp.com%7C146f634c869f4c70baa108d7f8909ffb%7C686ea1d3bc
> 2
> > >
> b4c6fa92cd99c5c301635%7C0%7C0%7C637251172354638298&amp;sdata=%2B
> > >
> Jhs%2Fb92%2BA56WzYdHe%2BBhXWfjk8feCGAFv%2BRzFKC9PM%3D&amp;r
> ese
> > > rved=0
> > >
> > > - Naresh
>
> Thanks,
> Miquèl

Thanks,
Shiva

^ permalink raw reply	[flat|nested] 42+ messages in thread
* RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
@ 2020-05-15 10:13             ` X.f. Ren
  0 siblings, 0 replies; 42+ messages in thread
From: X.f. Ren @ 2020-05-15 10:13 UTC (permalink / raw)
  To: Suram Suram, Shivamurthy Shastri (sshivamurthy),
	Poonam Aggrwal, Naresh Kamboju
  Cc: Vignesh Raghavendra, shiva.linuxworks, Richard Weinberger,
	Ashish Kumar, Frieder Schrempf, open list, Boris Brezillon,
	linux-mtd, lkft-triage, Miquel Raynal, Chuanhong Guo

Hello Suram, et al
Here are some information about those warming. Those warning should not impact testing.  
"
It is in the nature of NAND Flash that a small proportion of the blocks in the device are defective and therefore unusable from the day of manufacture (typically up to 1% is deemed acceptable by the manufacturer). Manufacturers perform thorough testing to identify any potentially bad blocks. When they have been identified, bad blocks are marked with a special marker in the OOB area of the block. This is the Manufacturer's Bad Block Marker (MBBM).

RAM resident BBT
RAM-resident BBTs are volatile and must be recreated every time the system is booted. The process involves scanning each block in the NAND device to check for bad block markers.

The main advantage of this approach is simplicity. This is particularly true for manufacturability, where is is possible for a generic NAND programmer to program pre-prepared images without the need to understand the underlying ECC scheme or any BBT formats.

There are, however, a number of disadvantages. In some cases these disadvantages preclude the use of RAM-resident BBTs.
NAND resident BBT
The use of NAND-Resident BBTs overcomes many of the issues associated with RAM-resident BBTs. For most cases this is the recommended method for recording and tracking bad blocks.

As a NAND-resident BBT is non-volatile, it is preserved across system boots. There should never be any reason to recreate the BBT by scanning the NAND device for bad block markers.

Typically, the BBT requires two bits of storage for each block. The table is stored in the last good block with a backup in the penultimate good block. By default, the last four physical blocks are reserved for BBTs. If there are fewer than two good blocks available in the last four, then the NAND device should be discarded.

In a ideal situation, the BBT should be built and written to Flash before any other data. This is mandatory in cases where it is not possible to use the ECC tags to distinguish between valid programmed ECC data and an MBBM. However, this has implications for manufacturability, as the NAND programmer needs to be taught how to write the BBT, including the relevant ECC scheme.

In some cases, it may be appropriate for the NAND Programmer to skip writing BBTs, and to defer BBT creation to the software drivers when the system is first booted. This avoids the complexities of customising the NAND Programmer, whilst retaining the benefits of using NAND-resident BBTs. This approach is only viable if there is no clash between the ECC layout and the MBBM location, or where ECC tags can be used to avoid ECC data being misinterpreted as a MBBM.
"


Best Regards
Ron

-----Original Message-----
From: Suram Suram <suram@nxp.com> 
Sent: 2020年5月15日 18:02
To: Shivamurthy Shastri (sshivamurthy) <sshivamurthy@micron.com>; Poonam Aggrwal <poonam.aggrwal@nxp.com>; Naresh Kamboju <naresh.kamboju@linaro.org>; X.f. Ren <xiaofeng.ren@nxp.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>; shiva.linuxworks@gmail.com; Ashish Kumar <ashish.kumar@nxp.com>; Richard Weinberger <richard@nod.at>; Vignesh Raghavendra <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>; Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open list <linux-kernel@vger.kernel.org>; lkft-triage@lists.linaro.org
Subject: RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices

+Ron who owns the test on this platform in NXP.

-----Original Message-----
From: Shivamurthy Shastri (sshivamurthy) <sshivamurthy@micron.com>
Sent: Friday, May 15, 2020 3:29 PM
To: Poonam Aggrwal <poonam.aggrwal@nxp.com>; Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>; shiva.linuxworks@gmail.com; Ashish Kumar <ashish.kumar@nxp.com>; Richard Weinberger <richard@nod.at>; Vignesh Raghavendra <vigneshr@ti.com>; Boris Brezillon <boris.brezillon@collabora.com>; Chuanhong Guo <gch981213@gmail.com>; Frieder Schrempf <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open list <linux-kernel@vger.kernel.org>; Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
Subject: RE: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices

Caution: EXT Email

Hi Naresh and Poonam,

> Subject: [EXT] Re: [PATCH v7 0/6] Add new series Micron SPI NAND 
> devices
>
> Hi Poonam,
>
> Poonam Aggrwal <poonam.aggrwal@nxp.com> wrote on Fri, 15 May 2020
> 05:29:07 +0000:
>
> > Adding Ashish.
> >
> > Regards
> > Poonam
> >
> > > -----Original Message-----
> > > From: Naresh Kamboju <naresh.kamboju@linaro.org>
> > > Sent: Friday, May 15, 2020 10:57 AM
> > > To: shiva.linuxworks@gmail.com; Miquel Raynal
> <miquel.raynal@bootlin.com>;
> > > Shivamurthy Shastri <sshivamurthy@micron.com>
> > > Cc: Richard Weinberger <richard@nod.at>; Vignesh Raghavendra 
> > > <vigneshr@ti.com>; Boris Brezillon 
> > > <boris.brezillon@collabora.com>; Chuanhong Guo 
> > > <gch981213@gmail.com>; Frieder Schrempf 
> > > <frieder.schrempf@kontron.de>; linux-mtd@lists.infradead.org; open
> list <linux-
> > > kernel@vger.kernel.org>; Poonam Aggrwal
> <poonam.aggrwal@nxp.com>;
> > > Suram Suram <suram@nxp.com>; lkft-triage@lists.linaro.org
> > > Subject: Re: [PATCH v7 0/6] Add new series Micron SPI NAND devices
> > >
> > > On Wed, 11 Mar 2020 at 23:28, <shiva.linuxworks@gmail.com> wrote:
> > > >
> > > > From: Shivamurthy Shastri <sshivamurthy@micron.com>
> > > >
> > > > This patchset is for the new series of Micron SPI NAND devices, 
> > > > and the following links are their datasheets.
> > >
> > > While boot NXP ls2088 device with mainline kernel the following 
> > > nand
> warning
> > > noticed. How critical this warning ?
>
> Are you sure this is the right thread? Shivamurthy added SPI-NAND 
> support, you are talking about a raw NAND device.
> > >
> > > [    1.357722] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0x48
> > > [    1.364085] nand: Micron MT29F16G08ABACAWP
> > > [    1.368181] nand: 2048 MiB, SLC, erase size: 512 KiB, page size:
> > > 4096, OOB size: 224
> > > [    1.375932] nand: WARNING: 530000000.flash: the ECC used on your
> > > system is too weak compared to the one required by the NAND chip
>
> If you are talking about this one, it is pretty self explanatory: the 
> NAND chip requires a minimum correction which is not achieved here.
> Either because the ECC engine cannot reach the requested amount (you 
> cannot do anything) or because you requested a too low correction with 
> DT properties.
>

Minimum required ECC for this device is 8-bit. Below is the datasheet for your reference.

https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.micron.com%2F-%2Fmedia%2Fclient%2Fglobal%2Fdocuments%2Fproducts%2Fdata-sheet%2Fnand-flash%2F70-series%2Fm72a_production_datasheet_revg.pdf%3Frev%3Dbb0a4ba04a1f40f98e29dc624d178dd8&amp;data=02%7C01%7Csuram%40nxp.com%7Cf699d2102f954d4d3bd208d7f8b69d35%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C1%7C637251335518803010&amp;sdata=1HP9Nx2mpttYGyURYB8t1hRsLOX6cBi05wnq8tiok64%3D&amp;reserved=0


> > >
> > > [    1.388767] Bad block table found at page 524160, version 0x01
> > > [    1.396833] Bad block table found at page 524032, version 0x01
> > > [    1.403781] nand_read_bbt: bad block at 0x000002d00000
> > > [    1.408921] nand_read_bbt: bad block at 0x000002d80000
> > > [    1.414750] fsl,ifc-nand 530000000.nand: IFC NAND device at
> > > 0x530000000, bank 2
> > >
> > >
> > > Full test log,
> > >
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fqa-
> > > reports.linaro.org%2Flkft%2Flinux-mainline-oe%2Fbuild%2Fv5.7-rc5-5
> > > 5-
> > >
> g1ae7efb38854%2Ftestrun%2F18254%2Flog&amp;data=02%7C01%7Cpoona
> m.
> > >
> aggrwal%40nxp.com%7C146f634c869f4c70baa108d7f8909ffb%7C686ea1d3bc
> 2
> > >
> b4c6fa92cd99c5c301635%7C0%7C0%7C637251172354638298&amp;sdata=%2B
> > >
> Jhs%2Fb92%2BA56WzYdHe%2BBhXWfjk8feCGAFv%2BRzFKC9PM%3D&amp;r
> ese
> > > rved=0
> > >
> > > - Naresh
>
> Thanks,
> Miquèl

Thanks,
Shiva
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

^ permalink raw reply	[flat|nested] 42+ messages in thread
end of thread, other threads:[~2020-05-15 10:13 UTC | newest]

Thread overview: 42+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-11 17:57 [PATCH v7 0/6] Add new series Micron SPI NAND devices shiva.linuxworks
2020-03-11 17:57 ` shiva.linuxworks
2020-03-11 17:57 ` [PATCH v7 1/6] mtd: spinand: micron: Generalize the OOB layout structure and function names shiva.linuxworks
2020-03-11 17:57   ` shiva.linuxworks
2020-03-12 21:33   ` Miquel Raynal
2020-03-12 21:33     ` Miquel Raynal
2020-03-11 17:57 ` [PATCH v7 2/6] mtd: spinand: micron: Describe the SPI NAND device MT29F2G01ABAGD shiva.linuxworks
2020-03-11 17:57   ` shiva.linuxworks
2020-03-12 21:33   ` Miquel Raynal
2020-03-12 21:33     ` Miquel Raynal
2020-03-11 17:57 ` [PATCH v7 3/6] mtd: spinand: micron: Add new Micron SPI NAND devices shiva.linuxworks
2020-03-11 17:57   ` shiva.linuxworks
2020-03-12 21:33   ` Miquel Raynal
2020-03-12 21:33     ` Miquel Raynal
2020-03-11 17:57 ` [PATCH v7 4/6] mtd: spinand: micron: identify SPI NAND device with Continuous Read mode shiva.linuxworks
2020-03-11 17:57   ` shiva.linuxworks
2020-03-12 21:33   ` Miquel Raynal
2020-03-12 21:33     ` Miquel Raynal
2020-03-11 17:57 ` [PATCH v7 5/6] mtd: spinand: micron: Add M70A series Micron SPI NAND devices shiva.linuxworks
2020-03-11 17:57   ` shiva.linuxworks
2020-03-12 21:33   ` Miquel Raynal
2020-03-12 21:33     ` Miquel Raynal
2020-03-11 17:57 ` [PATCH v7 6/6] mtd: spinand: micron: Add new Micron SPI NAND devices with multiple dies shiva.linuxworks
2020-03-11 17:57   ` shiva.linuxworks
2020-03-12 21:33   ` Miquel Raynal
2020-03-12 21:33     ` Miquel Raynal
2020-03-12 19:16 ` [EXT] [PATCH v7 0/6] Add new series Micron SPI NAND devices Shivamurthy Shastri (sshivamurthy)
2020-03-12 19:16   ` Shivamurthy Shastri (sshivamurthy)
2020-03-12 19:39   ` Miquel Raynal
2020-03-12 19:39     ` Miquel Raynal
2020-05-15  5:27 ` Naresh Kamboju
2020-05-15  5:27   ` Naresh Kamboju
2020-05-15  5:29   ` Poonam Aggrwal
2020-05-15  5:29     ` Poonam Aggrwal
2020-05-15  7:33     ` Miquel Raynal
2020-05-15  7:33       ` Miquel Raynal
2020-05-15  9:59       ` [EXT] " Shivamurthy Shastri (sshivamurthy)
2020-05-15  9:59         ` Shivamurthy Shastri (sshivamurthy)
2020-05-15 10:02         ` Suram Suram
2020-05-15 10:02           ` Suram Suram
2020-05-15 10:13           ` X.f. Ren
2020-05-15 10:13             ` X.f. Ren

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.