[PATCH v4 0/8] scsi: ufs: some cleanups and make the delay for host enabling customizable

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH v4 0/8] scsi: ufs: some cleanups and make the delay for host enabling customizable
@ 2020-03-13  9:00 ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: beanhuo, asutoshd, cang, matthias.bgg, bvanassche,
	linux-mediatek, linux-arm-kernel, linux-kernel, kuohong.wang,
	peter.wang, chun-hung.wu, andy.teng, Stanley Chu

Hi,

This patchset applies some driver cleanups and performance improvement
in ufs host drivers by making the delay for host enabling customizable
according to vendors' requirements.

v3 -> v4
	- Collect review tags in v2
	- In patch #8, fix incorrect condition of customized delay for host enabling

v2 -> v3
	- Remove /arch/arm64/configs/defconfig chnage because it is for local test only

v1 -> v2
	- Add patch #1 "scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc"
	- Remove struct ufs_init_prefetch in patch #2 "scsi: ufs: remove init_prefetch_data in struct ufs_hba"
	- Introduce common delay function in patch #4
	- Replace all delay places by common delay function in ufs-mediatek in patch #5
	- Use common delay function instead for host enabling delay in patch #6
	- Add patch #7 "scsi: ufs: make HCE polling more compact to improve initializatoin latency"
	- In patch #8, customize the delay in ufs_mtk_hce_enable_notify callback instead of ufs_mtk_init (Avri)

 drivers/scsi/ufs/ufs-mediatek.c | 64 ++++++++++++++++-----------
 drivers/scsi/ufs/ufs-mediatek.h |  1 +
 drivers/scsi/ufs/ufshcd.c       | 47 +++++++++++---------
 drivers/scsi/ufs/ufshcd.h       | 78 ++++++++++++++++-----------------
 4 files changed, 106 insertions(+), 84 deletions(-)

-- 
2.18.0

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [PATCH v4 0/8] scsi: ufs: some cleanups and make the delay for host enabling customizable
@ 2020-03-13  9:00 ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Hi,

This patchset applies some driver cleanups and performance improvement
in ufs host drivers by making the delay for host enabling customizable
according to vendors' requirements.

v3 -> v4
	- Collect review tags in v2
	- In patch #8, fix incorrect condition of customized delay for host enabling

v2 -> v3
	- Remove /arch/arm64/configs/defconfig chnage because it is for local test only

v1 -> v2
	- Add patch #1 "scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc"
	- Remove struct ufs_init_prefetch in patch #2 "scsi: ufs: remove init_prefetch_data in struct ufs_hba"
	- Introduce common delay function in patch #4
	- Replace all delay places by common delay function in ufs-mediatek in patch #5
	- Use common delay function instead for host enabling delay in patch #6
	- Add patch #7 "scsi: ufs: make HCE polling more compact to improve initializatoin latency"
	- In patch #8, customize the delay in ufs_mtk_hce_enable_notify callback instead of ufs_mtk_init (Avri)

 drivers/scsi/ufs/ufs-mediatek.c | 64 ++++++++++++++++-----------
 drivers/scsi/ufs/ufs-mediatek.h |  1 +
 drivers/scsi/ufs/ufshcd.c       | 47 +++++++++++---------
 drivers/scsi/ufs/ufshcd.h       | 78 ++++++++++++++++-----------------
 4 files changed, 106 insertions(+), 84 deletions(-)

-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [PATCH v4 0/8] scsi: ufs: some cleanups and make the delay for host enabling customizable
@ 2020-03-13  9:00 ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Hi,

This patchset applies some driver cleanups and performance improvement
in ufs host drivers by making the delay for host enabling customizable
according to vendors' requirements.

v3 -> v4
	- Collect review tags in v2
	- In patch #8, fix incorrect condition of customized delay for host enabling

v2 -> v3
	- Remove /arch/arm64/configs/defconfig chnage because it is for local test only

v1 -> v2
	- Add patch #1 "scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc"
	- Remove struct ufs_init_prefetch in patch #2 "scsi: ufs: remove init_prefetch_data in struct ufs_hba"
	- Introduce common delay function in patch #4
	- Replace all delay places by common delay function in ufs-mediatek in patch #5
	- Use common delay function instead for host enabling delay in patch #6
	- Add patch #7 "scsi: ufs: make HCE polling more compact to improve initializatoin latency"
	- In patch #8, customize the delay in ufs_mtk_hce_enable_notify callback instead of ufs_mtk_init (Avri)

 drivers/scsi/ufs/ufs-mediatek.c | 64 ++++++++++++++++-----------
 drivers/scsi/ufs/ufs-mediatek.h |  1 +
 drivers/scsi/ufs/ufshcd.c       | 47 +++++++++++---------
 drivers/scsi/ufs/ufshcd.h       | 78 ++++++++++++++++-----------------
 4 files changed, 106 insertions(+), 84 deletions(-)

-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 30+ messages in thread

* [PATCH v4 1/8] scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
  2020-03-13  9:00 ` Stanley Chu
  (?)
@ 2020-03-13  9:00   ` Stanley Chu
  -1 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: beanhuo, asutoshd, cang, matthias.bgg, bvanassche,
	linux-mediatek, linux-arm-kernel, linux-kernel, kuohong.wang,
	peter.wang, chun-hung.wu, andy.teng, Stanley Chu

In ufshcd_disable_tx_lcc(), if ufshcd_dme_get() or ufshcd_dme_peer_get()
get fail, uninitialized variable "tx_lanes" may be used as unexpected lane
ID for DME configuration.

Fix this issue by initializing "tx_lanes".

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 5698f1164a5e..314e808b0d4e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4315,7 +4315,7 @@ EXPORT_SYMBOL_GPL(ufshcd_hba_enable);
 
 static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer)
 {
-	int tx_lanes, i, err = 0;
+	int tx_lanes = 0, i, err = 0;
 
 	if (!peer)
 		ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 1/8] scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
@ 2020-03-13  9:00   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

In ufshcd_disable_tx_lcc(), if ufshcd_dme_get() or ufshcd_dme_peer_get()
get fail, uninitialized variable "tx_lanes" may be used as unexpected lane
ID for DME configuration.

Fix this issue by initializing "tx_lanes".

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 5698f1164a5e..314e808b0d4e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4315,7 +4315,7 @@ EXPORT_SYMBOL_GPL(ufshcd_hba_enable);
 
 static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer)
 {
-	int tx_lanes, i, err = 0;
+	int tx_lanes = 0, i, err = 0;
 
 	if (!peer)
 		ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 1/8] scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc()
@ 2020-03-13  9:00   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

In ufshcd_disable_tx_lcc(), if ufshcd_dme_get() or ufshcd_dme_peer_get()
get fail, uninitialized variable "tx_lanes" may be used as unexpected lane
ID for DME configuration.

Fix this issue by initializing "tx_lanes".

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 5698f1164a5e..314e808b0d4e 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4315,7 +4315,7 @@ EXPORT_SYMBOL_GPL(ufshcd_hba_enable);
 
 static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer)
 {
-	int tx_lanes, i, err = 0;
+	int tx_lanes = 0, i, err = 0;
 
 	if (!peer)
 		ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 2/8] scsi: ufs: remove init_prefetch_data in struct ufs_hba
  2020-03-13  9:00 ` Stanley Chu
  (?)
@ 2020-03-13  9:00   ` Stanley Chu
  -1 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: beanhuo, asutoshd, cang, matthias.bgg, bvanassche,
	linux-mediatek, linux-arm-kernel, linux-kernel, kuohong.wang,
	peter.wang, chun-hung.wu, andy.teng, Stanley Chu

Struct init_prefetch_data currently is used privately in
ufshcd_init_icc_levels(), thus it can be removed from struct ufs_hba.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 15 ++++++---------
 drivers/scsi/ufs/ufshcd.h | 11 -----------
 2 files changed, 6 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 314e808b0d4e..b4988b9ee36c 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6501,6 +6501,7 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba)
 {
 	int ret;
 	int buff_len = hba->desc_size.pwr_desc;
+	u32 icc_level;
 	u8 *desc_buf;
 
 	desc_buf = kmalloc(buff_len, GFP_KERNEL);
@@ -6516,21 +6517,17 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba)
 		goto out;
 	}
 
-	hba->init_prefetch_data.icc_level =
-			ufshcd_find_max_sup_active_icc_level(hba,
-			desc_buf, buff_len);
-	dev_dbg(hba->dev, "%s: setting icc_level 0x%x",
-			__func__, hba->init_prefetch_data.icc_level);
+	icc_level =
+		ufshcd_find_max_sup_active_icc_level(hba, desc_buf, buff_len);
+	dev_dbg(hba->dev, "%s: setting icc_level 0x%x",	__func__, icc_level);
 
 	ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
-		QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0,
-		&hba->init_prefetch_data.icc_level);
+		QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0, &icc_level);
 
 	if (ret)
 		dev_err(hba->dev,
 			"%s: Failed configuring bActiveICCLevel = %d ret = %d",
-			__func__, hba->init_prefetch_data.icc_level , ret);
-
+			__func__, icc_level, ret);
 out:
 	kfree(desc_buf);
 }
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 5c10777154fc..5cf79d2319a6 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -402,15 +402,6 @@ struct ufs_clk_scaling {
 	bool is_suspended;
 };
 
-/**
- * struct ufs_init_prefetch - contains data that is pre-fetched once during
- * initialization
- * @icc_level: icc level which was read during initialization
- */
-struct ufs_init_prefetch {
-	u32 icc_level;
-};
-
 #define UFS_ERR_REG_HIST_LENGTH 8
 /**
  * struct ufs_err_reg_hist - keeps history of errors
@@ -541,7 +532,6 @@ enum ufshcd_quirks {
  * @intr_mask: Interrupt Mask Bits
  * @ee_ctrl_mask: Exception event control mask
  * @is_powered: flag to check if HBA is powered
- * @init_prefetch_data: data pre-fetched during initialization
  * @eh_work: Worker to handle UFS errors that require s/w attention
  * @eeh_work: Worker to handle exception events
  * @errors: HBA errors
@@ -627,7 +617,6 @@ struct ufs_hba {
 	u32 intr_mask;
 	u16 ee_ctrl_mask;
 	bool is_powered;
-	struct ufs_init_prefetch init_prefetch_data;
 
 	/* Work Queues */
 	struct work_struct eh_work;
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 2/8] scsi: ufs: remove init_prefetch_data in struct ufs_hba
@ 2020-03-13  9:00   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Struct init_prefetch_data currently is used privately in
ufshcd_init_icc_levels(), thus it can be removed from struct ufs_hba.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 15 ++++++---------
 drivers/scsi/ufs/ufshcd.h | 11 -----------
 2 files changed, 6 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 314e808b0d4e..b4988b9ee36c 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6501,6 +6501,7 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba)
 {
 	int ret;
 	int buff_len = hba->desc_size.pwr_desc;
+	u32 icc_level;
 	u8 *desc_buf;
 
 	desc_buf = kmalloc(buff_len, GFP_KERNEL);
@@ -6516,21 +6517,17 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba)
 		goto out;
 	}
 
-	hba->init_prefetch_data.icc_level =
-			ufshcd_find_max_sup_active_icc_level(hba,
-			desc_buf, buff_len);
-	dev_dbg(hba->dev, "%s: setting icc_level 0x%x",
-			__func__, hba->init_prefetch_data.icc_level);
+	icc_level =
+		ufshcd_find_max_sup_active_icc_level(hba, desc_buf, buff_len);
+	dev_dbg(hba->dev, "%s: setting icc_level 0x%x",	__func__, icc_level);
 
 	ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
-		QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0,
-		&hba->init_prefetch_data.icc_level);
+		QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0, &icc_level);
 
 	if (ret)
 		dev_err(hba->dev,
 			"%s: Failed configuring bActiveICCLevel = %d ret = %d",
-			__func__, hba->init_prefetch_data.icc_level , ret);
-
+			__func__, icc_level, ret);
 out:
 	kfree(desc_buf);
 }
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 5c10777154fc..5cf79d2319a6 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -402,15 +402,6 @@ struct ufs_clk_scaling {
 	bool is_suspended;
 };
 
-/**
- * struct ufs_init_prefetch - contains data that is pre-fetched once during
- * initialization
- * @icc_level: icc level which was read during initialization
- */
-struct ufs_init_prefetch {
-	u32 icc_level;
-};
-
 #define UFS_ERR_REG_HIST_LENGTH 8
 /**
  * struct ufs_err_reg_hist - keeps history of errors
@@ -541,7 +532,6 @@ enum ufshcd_quirks {
  * @intr_mask: Interrupt Mask Bits
  * @ee_ctrl_mask: Exception event control mask
  * @is_powered: flag to check if HBA is powered
- * @init_prefetch_data: data pre-fetched during initialization
  * @eh_work: Worker to handle UFS errors that require s/w attention
  * @eeh_work: Worker to handle exception events
  * @errors: HBA errors
@@ -627,7 +617,6 @@ struct ufs_hba {
 	u32 intr_mask;
 	u16 ee_ctrl_mask;
 	bool is_powered;
-	struct ufs_init_prefetch init_prefetch_data;
 
 	/* Work Queues */
 	struct work_struct eh_work;
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 2/8] scsi: ufs: remove init_prefetch_data in struct ufs_hba
@ 2020-03-13  9:00   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Struct init_prefetch_data currently is used privately in
ufshcd_init_icc_levels(), thus it can be removed from struct ufs_hba.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 15 ++++++---------
 drivers/scsi/ufs/ufshcd.h | 11 -----------
 2 files changed, 6 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 314e808b0d4e..b4988b9ee36c 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6501,6 +6501,7 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba)
 {
 	int ret;
 	int buff_len = hba->desc_size.pwr_desc;
+	u32 icc_level;
 	u8 *desc_buf;
 
 	desc_buf = kmalloc(buff_len, GFP_KERNEL);
@@ -6516,21 +6517,17 @@ static void ufshcd_init_icc_levels(struct ufs_hba *hba)
 		goto out;
 	}
 
-	hba->init_prefetch_data.icc_level =
-			ufshcd_find_max_sup_active_icc_level(hba,
-			desc_buf, buff_len);
-	dev_dbg(hba->dev, "%s: setting icc_level 0x%x",
-			__func__, hba->init_prefetch_data.icc_level);
+	icc_level =
+		ufshcd_find_max_sup_active_icc_level(hba, desc_buf, buff_len);
+	dev_dbg(hba->dev, "%s: setting icc_level 0x%x",	__func__, icc_level);
 
 	ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_WRITE_ATTR,
-		QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0,
-		&hba->init_prefetch_data.icc_level);
+		QUERY_ATTR_IDN_ACTIVE_ICC_LVL, 0, 0, &icc_level);
 
 	if (ret)
 		dev_err(hba->dev,
 			"%s: Failed configuring bActiveICCLevel = %d ret = %d",
-			__func__, hba->init_prefetch_data.icc_level , ret);
-
+			__func__, icc_level, ret);
 out:
 	kfree(desc_buf);
 }
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 5c10777154fc..5cf79d2319a6 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -402,15 +402,6 @@ struct ufs_clk_scaling {
 	bool is_suspended;
 };
 
-/**
- * struct ufs_init_prefetch - contains data that is pre-fetched once during
- * initialization
- * @icc_level: icc level which was read during initialization
- */
-struct ufs_init_prefetch {
-	u32 icc_level;
-};
-
 #define UFS_ERR_REG_HIST_LENGTH 8
 /**
  * struct ufs_err_reg_hist - keeps history of errors
@@ -541,7 +532,6 @@ enum ufshcd_quirks {
  * @intr_mask: Interrupt Mask Bits
  * @ee_ctrl_mask: Exception event control mask
  * @is_powered: flag to check if HBA is powered
- * @init_prefetch_data: data pre-fetched during initialization
  * @eh_work: Worker to handle UFS errors that require s/w attention
  * @eeh_work: Worker to handle exception events
  * @errors: HBA errors
@@ -627,7 +617,6 @@ struct ufs_hba {
 	u32 intr_mask;
 	u16 ee_ctrl_mask;
 	bool is_powered;
-	struct ufs_init_prefetch init_prefetch_data;
 
 	/* Work Queues */
 	struct work_struct eh_work;
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 3/8] scsi: ufs: use an enum for host capabilities
  2020-03-13  9:00 ` Stanley Chu
  (?)
@ 2020-03-13  9:00   ` Stanley Chu
  -1 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: beanhuo, asutoshd, cang, matthias.bgg, bvanassche,
	linux-mediatek, linux-arm-kernel, linux-kernel, kuohong.wang,
	peter.wang, chun-hung.wu, andy.teng, Stanley Chu

Use an enum to specify the host capabilities instead of #defines inside the
structure definition.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.h | 65 ++++++++++++++++++++++-----------------
 1 file changed, 37 insertions(+), 28 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 5cf79d2319a6..fec004cd8054 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -501,6 +501,43 @@ enum ufshcd_quirks {
 	UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		= 1 << 5,
 };
 
+enum ufshcd_caps {
+	/* Allow dynamic clk gating */
+	UFSHCD_CAP_CLK_GATING				= 1 << 0,
+
+	/* Allow hiberb8 with clk gating */
+	UFSHCD_CAP_HIBERN8_WITH_CLK_GATING		= 1 << 1,
+
+	/* Allow dynamic clk scaling */
+	UFSHCD_CAP_CLK_SCALING				= 1 << 2,
+
+	/* Allow auto bkops to enabled during runtime suspend */
+	UFSHCD_CAP_AUTO_BKOPS_SUSPEND			= 1 << 3,
+
+	/*
+	 * This capability allows host controller driver to use the UFS HCI's
+	 * interrupt aggregation capability.
+	 * CAUTION: Enabling this might reduce overall UFS throughput.
+	 */
+	UFSHCD_CAP_INTR_AGGR				= 1 << 4,
+
+	/*
+	 * This capability allows the device auto-bkops to be always enabled
+	 * except during suspend (both runtime and suspend).
+	 * Enabling this capability means that device will always be allowed
+	 * to do background operation when it's active but it might degrade
+	 * the performance of ongoing read/write operations.
+	 */
+	UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
+
+	/*
+	 * This capability allows host controller driver to automatically
+	 * enable runtime power management by itself instead of waiting
+	 * for userspace to control the power management.
+	 */
+	UFSHCD_CAP_RPM_AUTOSUSPEND			= 1 << 6,
+};
+
 /**
  * struct ufs_hba - per adapter private structure
  * @mmio_base: UFSHCI base register address
@@ -653,34 +690,6 @@ struct ufs_hba {
 	struct ufs_clk_gating clk_gating;
 	/* Control to enable/disable host capabilities */
 	u32 caps;
-	/* Allow dynamic clk gating */
-#define UFSHCD_CAP_CLK_GATING	(1 << 0)
-	/* Allow hiberb8 with clk gating */
-#define UFSHCD_CAP_HIBERN8_WITH_CLK_GATING (1 << 1)
-	/* Allow dynamic clk scaling */
-#define UFSHCD_CAP_CLK_SCALING	(1 << 2)
-	/* Allow auto bkops to enabled during runtime suspend */
-#define UFSHCD_CAP_AUTO_BKOPS_SUSPEND (1 << 3)
-	/*
-	 * This capability allows host controller driver to use the UFS HCI's
-	 * interrupt aggregation capability.
-	 * CAUTION: Enabling this might reduce overall UFS throughput.
-	 */
-#define UFSHCD_CAP_INTR_AGGR (1 << 4)
-	/*
-	 * This capability allows the device auto-bkops to be always enabled
-	 * except during suspend (both runtime and suspend).
-	 * Enabling this capability means that device will always be allowed
-	 * to do background operation when it's active but it might degrade
-	 * the performance of ongoing read/write operations.
-	 */
-#define UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND (1 << 5)
-	/*
-	 * This capability allows host controller driver to automatically
-	 * enable runtime power management by itself instead of waiting
-	 * for userspace to control the power management.
-	 */
-#define UFSHCD_CAP_RPM_AUTOSUSPEND (1 << 6)
 
 	struct devfreq *devfreq;
 	struct ufs_clk_scaling clk_scaling;
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 3/8] scsi: ufs: use an enum for host capabilities
@ 2020-03-13  9:00   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Use an enum to specify the host capabilities instead of #defines inside the
structure definition.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.h | 65 ++++++++++++++++++++++-----------------
 1 file changed, 37 insertions(+), 28 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 5cf79d2319a6..fec004cd8054 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -501,6 +501,43 @@ enum ufshcd_quirks {
 	UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		= 1 << 5,
 };
 
+enum ufshcd_caps {
+	/* Allow dynamic clk gating */
+	UFSHCD_CAP_CLK_GATING				= 1 << 0,
+
+	/* Allow hiberb8 with clk gating */
+	UFSHCD_CAP_HIBERN8_WITH_CLK_GATING		= 1 << 1,
+
+	/* Allow dynamic clk scaling */
+	UFSHCD_CAP_CLK_SCALING				= 1 << 2,
+
+	/* Allow auto bkops to enabled during runtime suspend */
+	UFSHCD_CAP_AUTO_BKOPS_SUSPEND			= 1 << 3,
+
+	/*
+	 * This capability allows host controller driver to use the UFS HCI's
+	 * interrupt aggregation capability.
+	 * CAUTION: Enabling this might reduce overall UFS throughput.
+	 */
+	UFSHCD_CAP_INTR_AGGR				= 1 << 4,
+
+	/*
+	 * This capability allows the device auto-bkops to be always enabled
+	 * except during suspend (both runtime and suspend).
+	 * Enabling this capability means that device will always be allowed
+	 * to do background operation when it's active but it might degrade
+	 * the performance of ongoing read/write operations.
+	 */
+	UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
+
+	/*
+	 * This capability allows host controller driver to automatically
+	 * enable runtime power management by itself instead of waiting
+	 * for userspace to control the power management.
+	 */
+	UFSHCD_CAP_RPM_AUTOSUSPEND			= 1 << 6,
+};
+
 /**
  * struct ufs_hba - per adapter private structure
  * @mmio_base: UFSHCI base register address
@@ -653,34 +690,6 @@ struct ufs_hba {
 	struct ufs_clk_gating clk_gating;
 	/* Control to enable/disable host capabilities */
 	u32 caps;
-	/* Allow dynamic clk gating */
-#define UFSHCD_CAP_CLK_GATING	(1 << 0)
-	/* Allow hiberb8 with clk gating */
-#define UFSHCD_CAP_HIBERN8_WITH_CLK_GATING (1 << 1)
-	/* Allow dynamic clk scaling */
-#define UFSHCD_CAP_CLK_SCALING	(1 << 2)
-	/* Allow auto bkops to enabled during runtime suspend */
-#define UFSHCD_CAP_AUTO_BKOPS_SUSPEND (1 << 3)
-	/*
-	 * This capability allows host controller driver to use the UFS HCI's
-	 * interrupt aggregation capability.
-	 * CAUTION: Enabling this might reduce overall UFS throughput.
-	 */
-#define UFSHCD_CAP_INTR_AGGR (1 << 4)
-	/*
-	 * This capability allows the device auto-bkops to be always enabled
-	 * except during suspend (both runtime and suspend).
-	 * Enabling this capability means that device will always be allowed
-	 * to do background operation when it's active but it might degrade
-	 * the performance of ongoing read/write operations.
-	 */
-#define UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND (1 << 5)
-	/*
-	 * This capability allows host controller driver to automatically
-	 * enable runtime power management by itself instead of waiting
-	 * for userspace to control the power management.
-	 */
-#define UFSHCD_CAP_RPM_AUTOSUSPEND (1 << 6)
 
 	struct devfreq *devfreq;
 	struct ufs_clk_scaling clk_scaling;
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 3/8] scsi: ufs: use an enum for host capabilities
@ 2020-03-13  9:00   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Use an enum to specify the host capabilities instead of #defines inside the
structure definition.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.h | 65 ++++++++++++++++++++++-----------------
 1 file changed, 37 insertions(+), 28 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 5cf79d2319a6..fec004cd8054 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -501,6 +501,43 @@ enum ufshcd_quirks {
 	UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION		= 1 << 5,
 };
 
+enum ufshcd_caps {
+	/* Allow dynamic clk gating */
+	UFSHCD_CAP_CLK_GATING				= 1 << 0,
+
+	/* Allow hiberb8 with clk gating */
+	UFSHCD_CAP_HIBERN8_WITH_CLK_GATING		= 1 << 1,
+
+	/* Allow dynamic clk scaling */
+	UFSHCD_CAP_CLK_SCALING				= 1 << 2,
+
+	/* Allow auto bkops to enabled during runtime suspend */
+	UFSHCD_CAP_AUTO_BKOPS_SUSPEND			= 1 << 3,
+
+	/*
+	 * This capability allows host controller driver to use the UFS HCI's
+	 * interrupt aggregation capability.
+	 * CAUTION: Enabling this might reduce overall UFS throughput.
+	 */
+	UFSHCD_CAP_INTR_AGGR				= 1 << 4,
+
+	/*
+	 * This capability allows the device auto-bkops to be always enabled
+	 * except during suspend (both runtime and suspend).
+	 * Enabling this capability means that device will always be allowed
+	 * to do background operation when it's active but it might degrade
+	 * the performance of ongoing read/write operations.
+	 */
+	UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
+
+	/*
+	 * This capability allows host controller driver to automatically
+	 * enable runtime power management by itself instead of waiting
+	 * for userspace to control the power management.
+	 */
+	UFSHCD_CAP_RPM_AUTOSUSPEND			= 1 << 6,
+};
+
 /**
  * struct ufs_hba - per adapter private structure
  * @mmio_base: UFSHCI base register address
@@ -653,34 +690,6 @@ struct ufs_hba {
 	struct ufs_clk_gating clk_gating;
 	/* Control to enable/disable host capabilities */
 	u32 caps;
-	/* Allow dynamic clk gating */
-#define UFSHCD_CAP_CLK_GATING	(1 << 0)
-	/* Allow hiberb8 with clk gating */
-#define UFSHCD_CAP_HIBERN8_WITH_CLK_GATING (1 << 1)
-	/* Allow dynamic clk scaling */
-#define UFSHCD_CAP_CLK_SCALING	(1 << 2)
-	/* Allow auto bkops to enabled during runtime suspend */
-#define UFSHCD_CAP_AUTO_BKOPS_SUSPEND (1 << 3)
-	/*
-	 * This capability allows host controller driver to use the UFS HCI's
-	 * interrupt aggregation capability.
-	 * CAUTION: Enabling this might reduce overall UFS throughput.
-	 */
-#define UFSHCD_CAP_INTR_AGGR (1 << 4)
-	/*
-	 * This capability allows the device auto-bkops to be always enabled
-	 * except during suspend (both runtime and suspend).
-	 * Enabling this capability means that device will always be allowed
-	 * to do background operation when it's active but it might degrade
-	 * the performance of ongoing read/write operations.
-	 */
-#define UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND (1 << 5)
-	/*
-	 * This capability allows host controller driver to automatically
-	 * enable runtime power management by itself instead of waiting
-	 * for userspace to control the power management.
-	 */
-#define UFSHCD_CAP_RPM_AUTOSUSPEND (1 << 6)
 
 	struct devfreq *devfreq;
 	struct ufs_clk_scaling clk_scaling;
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 4/8] scsi: ufs: introduce common delay function
  2020-03-13  9:00 ` Stanley Chu
  (?)
@ 2020-03-13  9:00   ` Stanley Chu
  -1 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: beanhuo, asutoshd, cang, matthias.bgg, bvanassche,
	linux-mediatek, linux-arm-kernel, linux-kernel, kuohong.wang,
	peter.wang, chun-hung.wu, andy.teng, Stanley Chu

Introduce common delay function to collect all delay requirements
to simplify driver and take choices of udelay and usleep_range into
consideration.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufshcd.c | 27 ++++++++++++++++++---------
 drivers/scsi/ufs/ufshcd.h |  1 +
 2 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b4988b9ee36c..ce65d321a73f 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -597,6 +597,18 @@ static void ufshcd_print_pwr_info(struct ufs_hba *hba)
 		 hba->pwr_info.hs_rate);
 }
 
+void ufshcd_wait_us(unsigned long us, unsigned long tolerance, bool can_sleep)
+{
+	if (!us)
+		return;
+
+	if (us < 10 || !can_sleep)
+		udelay(us);
+	else
+		usleep_range(us, us + tolerance);
+}
+EXPORT_SYMBOL_GPL(ufshcd_wait_us);
+
 /*
  * ufshcd_wait_for_register - wait for register value to change
  * @hba - per-adapter interface
@@ -620,10 +632,7 @@ int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
 	val = val & mask;
 
 	while ((ufshcd_readl(hba, reg) & mask) != val) {
-		if (can_sleep)
-			usleep_range(interval_us, interval_us + 50);
-		else
-			udelay(interval_us);
+		ufshcd_wait_us(interval_us, 50, can_sleep);
 		if (time_after(jiffies, timeout)) {
 			if ((ufshcd_readl(hba, reg) & mask) != val)
 				err = -ETIMEDOUT;
@@ -3565,7 +3574,7 @@ static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba)
 	}
 
 	/* allow sleep for extra 50us if needed */
-	usleep_range(min_sleep_time_us, min_sleep_time_us + 50);
+	ufshcd_wait_us(min_sleep_time_us, 50, true);
 }
 
 /**
@@ -4289,7 +4298,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 	 * instruction might be read back.
 	 * This delay can be changed based on the controller.
 	 */
-	usleep_range(1000, 1100);
+	ufshcd_wait_us(1000, 100, true);
 
 	/* wait for the host controller to complete initialization */
 	retry = 10;
@@ -4301,7 +4310,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 				"Controller enable failed\n");
 			return -EIO;
 		}
-		usleep_range(5000, 5100);
+		ufshcd_wait_us(5000, 100, true);
 	}
 
 	/* enable UIC related interrupts */
@@ -6224,7 +6233,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 			reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 			if (reg & (1 << tag)) {
 				/* sleep for max. 200us to stabilize */
-				usleep_range(100, 200);
+				ufshcd_wait_us(100, 100, true);
 				continue;
 			}
 			/* command completed already */
@@ -7783,7 +7792,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
 	 */
 	if (!ufshcd_is_link_active(hba) &&
 	    hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM)
-		usleep_range(2000, 2100);
+		ufshcd_wait_us(2000, 100, true);
 
 	/*
 	 * If UFS device is either in UFS_Sleep turn off VCC rail to save some
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index fec004cd8054..4683e7bf6640 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -781,6 +781,7 @@ int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
 int ufshcd_make_hba_operational(struct ufs_hba *hba);
 void ufshcd_remove(struct ufs_hba *);
 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
+void ufshcd_wait_us(unsigned long us, unsigned long tolerance, bool can_sleep);
 int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
 				u32 val, unsigned long interval_us,
 				unsigned long timeout_ms, bool can_sleep);
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 4/8] scsi: ufs: introduce common delay function
@ 2020-03-13  9:00   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Introduce common delay function to collect all delay requirements
to simplify driver and take choices of udelay and usleep_range into
consideration.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufshcd.c | 27 ++++++++++++++++++---------
 drivers/scsi/ufs/ufshcd.h |  1 +
 2 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b4988b9ee36c..ce65d321a73f 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -597,6 +597,18 @@ static void ufshcd_print_pwr_info(struct ufs_hba *hba)
 		 hba->pwr_info.hs_rate);
 }
 
+void ufshcd_wait_us(unsigned long us, unsigned long tolerance, bool can_sleep)
+{
+	if (!us)
+		return;
+
+	if (us < 10 || !can_sleep)
+		udelay(us);
+	else
+		usleep_range(us, us + tolerance);
+}
+EXPORT_SYMBOL_GPL(ufshcd_wait_us);
+
 /*
  * ufshcd_wait_for_register - wait for register value to change
  * @hba - per-adapter interface
@@ -620,10 +632,7 @@ int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
 	val = val & mask;
 
 	while ((ufshcd_readl(hba, reg) & mask) != val) {
-		if (can_sleep)
-			usleep_range(interval_us, interval_us + 50);
-		else
-			udelay(interval_us);
+		ufshcd_wait_us(interval_us, 50, can_sleep);
 		if (time_after(jiffies, timeout)) {
 			if ((ufshcd_readl(hba, reg) & mask) != val)
 				err = -ETIMEDOUT;
@@ -3565,7 +3574,7 @@ static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba)
 	}
 
 	/* allow sleep for extra 50us if needed */
-	usleep_range(min_sleep_time_us, min_sleep_time_us + 50);
+	ufshcd_wait_us(min_sleep_time_us, 50, true);
 }
 
 /**
@@ -4289,7 +4298,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 	 * instruction might be read back.
 	 * This delay can be changed based on the controller.
 	 */
-	usleep_range(1000, 1100);
+	ufshcd_wait_us(1000, 100, true);
 
 	/* wait for the host controller to complete initialization */
 	retry = 10;
@@ -4301,7 +4310,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 				"Controller enable failed\n");
 			return -EIO;
 		}
-		usleep_range(5000, 5100);
+		ufshcd_wait_us(5000, 100, true);
 	}
 
 	/* enable UIC related interrupts */
@@ -6224,7 +6233,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 			reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 			if (reg & (1 << tag)) {
 				/* sleep for max. 200us to stabilize */
-				usleep_range(100, 200);
+				ufshcd_wait_us(100, 100, true);
 				continue;
 			}
 			/* command completed already */
@@ -7783,7 +7792,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
 	 */
 	if (!ufshcd_is_link_active(hba) &&
 	    hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM)
-		usleep_range(2000, 2100);
+		ufshcd_wait_us(2000, 100, true);
 
 	/*
 	 * If UFS device is either in UFS_Sleep turn off VCC rail to save some
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index fec004cd8054..4683e7bf6640 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -781,6 +781,7 @@ int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
 int ufshcd_make_hba_operational(struct ufs_hba *hba);
 void ufshcd_remove(struct ufs_hba *);
 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
+void ufshcd_wait_us(unsigned long us, unsigned long tolerance, bool can_sleep);
 int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
 				u32 val, unsigned long interval_us,
 				unsigned long timeout_ms, bool can_sleep);
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 4/8] scsi: ufs: introduce common delay function
@ 2020-03-13  9:00   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:00 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Introduce common delay function to collect all delay requirements
to simplify driver and take choices of udelay and usleep_range into
consideration.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufshcd.c | 27 ++++++++++++++++++---------
 drivers/scsi/ufs/ufshcd.h |  1 +
 2 files changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b4988b9ee36c..ce65d321a73f 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -597,6 +597,18 @@ static void ufshcd_print_pwr_info(struct ufs_hba *hba)
 		 hba->pwr_info.hs_rate);
 }
 
+void ufshcd_wait_us(unsigned long us, unsigned long tolerance, bool can_sleep)
+{
+	if (!us)
+		return;
+
+	if (us < 10 || !can_sleep)
+		udelay(us);
+	else
+		usleep_range(us, us + tolerance);
+}
+EXPORT_SYMBOL_GPL(ufshcd_wait_us);
+
 /*
  * ufshcd_wait_for_register - wait for register value to change
  * @hba - per-adapter interface
@@ -620,10 +632,7 @@ int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
 	val = val & mask;
 
 	while ((ufshcd_readl(hba, reg) & mask) != val) {
-		if (can_sleep)
-			usleep_range(interval_us, interval_us + 50);
-		else
-			udelay(interval_us);
+		ufshcd_wait_us(interval_us, 50, can_sleep);
 		if (time_after(jiffies, timeout)) {
 			if ((ufshcd_readl(hba, reg) & mask) != val)
 				err = -ETIMEDOUT;
@@ -3565,7 +3574,7 @@ static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba)
 	}
 
 	/* allow sleep for extra 50us if needed */
-	usleep_range(min_sleep_time_us, min_sleep_time_us + 50);
+	ufshcd_wait_us(min_sleep_time_us, 50, true);
 }
 
 /**
@@ -4289,7 +4298,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 	 * instruction might be read back.
 	 * This delay can be changed based on the controller.
 	 */
-	usleep_range(1000, 1100);
+	ufshcd_wait_us(1000, 100, true);
 
 	/* wait for the host controller to complete initialization */
 	retry = 10;
@@ -4301,7 +4310,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 				"Controller enable failed\n");
 			return -EIO;
 		}
-		usleep_range(5000, 5100);
+		ufshcd_wait_us(5000, 100, true);
 	}
 
 	/* enable UIC related interrupts */
@@ -6224,7 +6233,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
 			reg = ufshcd_readl(hba, REG_UTP_TRANSFER_REQ_DOOR_BELL);
 			if (reg & (1 << tag)) {
 				/* sleep for max. 200us to stabilize */
-				usleep_range(100, 200);
+				ufshcd_wait_us(100, 100, true);
 				continue;
 			}
 			/* command completed already */
@@ -7783,7 +7792,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
 	 */
 	if (!ufshcd_is_link_active(hba) &&
 	    hba->dev_quirks & UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM)
-		usleep_range(2000, 2100);
+		ufshcd_wait_us(2000, 100, true);
 
 	/*
 	 * If UFS device is either in UFS_Sleep turn off VCC rail to save some
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index fec004cd8054..4683e7bf6640 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -781,6 +781,7 @@ int ufshcd_init(struct ufs_hba * , void __iomem * , unsigned int);
 int ufshcd_make_hba_operational(struct ufs_hba *hba);
 void ufshcd_remove(struct ufs_hba *);
 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
+void ufshcd_wait_us(unsigned long us, unsigned long tolerance, bool can_sleep);
 int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
 				u32 val, unsigned long interval_us,
 				unsigned long timeout_ms, bool can_sleep);
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 5/8] scsi: ufs-mediatek: replace all delay places by common delay function
  2020-03-13  9:00 ` Stanley Chu
  (?)
@ 2020-03-13  9:01   ` Stanley Chu
  -1 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: beanhuo, asutoshd, cang, matthias.bgg, bvanassche,
	linux-mediatek, linux-arm-kernel, linux-kernel, kuohong.wang,
	peter.wang, chun-hung.wu, andy.teng, Stanley Chu

A common delay function is introduced in UFS core driver, thus
ufs-mediatek can use it to replace all delay codes.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 3b0e575d7460..0ff6781654fd 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -100,17 +100,6 @@ static int ufs_mtk_bind_mphy(struct ufs_hba *hba)
 	return err;
 }
 
-static void ufs_mtk_udelay(unsigned long us)
-{
-	if (!us)
-		return;
-
-	if (us < 10)
-		udelay(us);
-	else
-		usleep_range(us, us + 10);
-}
-
 static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
@@ -123,7 +112,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 
 	if (on) {
 		ufs_mtk_ref_clk_notify(on, res);
-		ufs_mtk_udelay(host->ref_clk_ungating_wait_us);
+		ufshcd_wait_us(host->ref_clk_ungating_wait_us, 10, true);
 		ufshcd_writel(hba, REFCLK_REQUEST, REG_UFS_REFCLK_CTRL);
 	} else {
 		ufshcd_writel(hba, REFCLK_RELEASE, REG_UFS_REFCLK_CTRL);
@@ -138,7 +127,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 		if (((value & REFCLK_ACK) >> 1) == (value & REFCLK_REQUEST))
 			goto out;
 
-		usleep_range(100, 200);
+		ufshcd_wait_us(100, 100, true);
 	} while (time_before(jiffies, timeout));
 
 	dev_err(hba->dev, "missing ack of refclk req, reg: 0x%x\n", value);
@@ -150,7 +139,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 out:
 	host->ref_clk_enabled = on;
 	if (!on) {
-		ufs_mtk_udelay(host->ref_clk_gating_wait_us);
+		ufshcd_wait_us(host->ref_clk_gating_wait_us, 10, true);
 		ufs_mtk_ref_clk_notify(on, res);
 	}
 
@@ -430,12 +419,12 @@ static void ufs_mtk_device_reset(struct ufs_hba *hba)
 	 *
 	 * To be on safe side, keep the reset low for at least 10us.
 	 */
-	usleep_range(10, 15);
+	ufshcd_wait_us(10, 5, true);
 
 	ufs_mtk_device_reset_ctrl(1, res);
 
 	/* Some devices may need time to respond to rst_n */
-	usleep_range(10000, 15000);
+	ufshcd_wait_us(10000, 5000, true);
 
 	dev_info(hba->dev, "device reset done\n");
 }
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 5/8] scsi: ufs-mediatek: replace all delay places by common delay function
@ 2020-03-13  9:01   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

A common delay function is introduced in UFS core driver, thus
ufs-mediatek can use it to replace all delay codes.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 3b0e575d7460..0ff6781654fd 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -100,17 +100,6 @@ static int ufs_mtk_bind_mphy(struct ufs_hba *hba)
 	return err;
 }
 
-static void ufs_mtk_udelay(unsigned long us)
-{
-	if (!us)
-		return;
-
-	if (us < 10)
-		udelay(us);
-	else
-		usleep_range(us, us + 10);
-}
-
 static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
@@ -123,7 +112,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 
 	if (on) {
 		ufs_mtk_ref_clk_notify(on, res);
-		ufs_mtk_udelay(host->ref_clk_ungating_wait_us);
+		ufshcd_wait_us(host->ref_clk_ungating_wait_us, 10, true);
 		ufshcd_writel(hba, REFCLK_REQUEST, REG_UFS_REFCLK_CTRL);
 	} else {
 		ufshcd_writel(hba, REFCLK_RELEASE, REG_UFS_REFCLK_CTRL);
@@ -138,7 +127,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 		if (((value & REFCLK_ACK) >> 1) == (value & REFCLK_REQUEST))
 			goto out;
 
-		usleep_range(100, 200);
+		ufshcd_wait_us(100, 100, true);
 	} while (time_before(jiffies, timeout));
 
 	dev_err(hba->dev, "missing ack of refclk req, reg: 0x%x\n", value);
@@ -150,7 +139,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 out:
 	host->ref_clk_enabled = on;
 	if (!on) {
-		ufs_mtk_udelay(host->ref_clk_gating_wait_us);
+		ufshcd_wait_us(host->ref_clk_gating_wait_us, 10, true);
 		ufs_mtk_ref_clk_notify(on, res);
 	}
 
@@ -430,12 +419,12 @@ static void ufs_mtk_device_reset(struct ufs_hba *hba)
 	 *
 	 * To be on safe side, keep the reset low for at least 10us.
 	 */
-	usleep_range(10, 15);
+	ufshcd_wait_us(10, 5, true);
 
 	ufs_mtk_device_reset_ctrl(1, res);
 
 	/* Some devices may need time to respond to rst_n */
-	usleep_range(10000, 15000);
+	ufshcd_wait_us(10000, 5000, true);
 
 	dev_info(hba->dev, "device reset done\n");
 }
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 5/8] scsi: ufs-mediatek: replace all delay places by common delay function
@ 2020-03-13  9:01   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

A common delay function is introduced in UFS core driver, thus
ufs-mediatek can use it to replace all delay codes.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 3b0e575d7460..0ff6781654fd 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -100,17 +100,6 @@ static int ufs_mtk_bind_mphy(struct ufs_hba *hba)
 	return err;
 }
 
-static void ufs_mtk_udelay(unsigned long us)
-{
-	if (!us)
-		return;
-
-	if (us < 10)
-		udelay(us);
-	else
-		usleep_range(us, us + 10);
-}
-
 static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
@@ -123,7 +112,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 
 	if (on) {
 		ufs_mtk_ref_clk_notify(on, res);
-		ufs_mtk_udelay(host->ref_clk_ungating_wait_us);
+		ufshcd_wait_us(host->ref_clk_ungating_wait_us, 10, true);
 		ufshcd_writel(hba, REFCLK_REQUEST, REG_UFS_REFCLK_CTRL);
 	} else {
 		ufshcd_writel(hba, REFCLK_RELEASE, REG_UFS_REFCLK_CTRL);
@@ -138,7 +127,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 		if (((value & REFCLK_ACK) >> 1) == (value & REFCLK_REQUEST))
 			goto out;
 
-		usleep_range(100, 200);
+		ufshcd_wait_us(100, 100, true);
 	} while (time_before(jiffies, timeout));
 
 	dev_err(hba->dev, "missing ack of refclk req, reg: 0x%x\n", value);
@@ -150,7 +139,7 @@ static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 out:
 	host->ref_clk_enabled = on;
 	if (!on) {
-		ufs_mtk_udelay(host->ref_clk_gating_wait_us);
+		ufshcd_wait_us(host->ref_clk_gating_wait_us, 10, true);
 		ufs_mtk_ref_clk_notify(on, res);
 	}
 
@@ -430,12 +419,12 @@ static void ufs_mtk_device_reset(struct ufs_hba *hba)
 	 *
 	 * To be on safe side, keep the reset low for at least 10us.
 	 */
-	usleep_range(10, 15);
+	ufshcd_wait_us(10, 5, true);
 
 	ufs_mtk_device_reset_ctrl(1, res);
 
 	/* Some devices may need time to respond to rst_n */
-	usleep_range(10000, 15000);
+	ufshcd_wait_us(10000, 5000, true);
 
 	dev_info(hba->dev, "device reset done\n");
 }
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 6/8] scsi: ufs: allow customized delay for host enabling
  2020-03-13  9:00 ` Stanley Chu
  (?)
@ 2020-03-13  9:01   ` Stanley Chu
  -1 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: beanhuo, asutoshd, cang, matthias.bgg, bvanassche,
	linux-mediatek, linux-arm-kernel, linux-kernel, kuohong.wang,
	peter.wang, chun-hung.wu, andy.teng, Stanley Chu

Currently a 1 ms delay is applied before polling CONTROLLER_ENABLE
bit. This delay may not be required or can be changed in different
controllers. Make the delay as a changeable value in struct ufs_hba to
allow it customized by vendors.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 drivers/scsi/ufs/ufshcd.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ce65d321a73f..dcbf45d547d8 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4298,7 +4298,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 	 * instruction might be read back.
 	 * This delay can be changed based on the controller.
 	 */
-	ufshcd_wait_us(1000, 100, true);
+	ufshcd_wait_us(hba->hba_enable_delay_us, 100, true);
 
 	/* wait for the host controller to complete initialization */
 	retry = 10;
@@ -8418,6 +8418,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 
 	hba->mmio_base = mmio_base;
 	hba->irq = irq;
+	hba->hba_enable_delay_us = 1000;
 
 	err = ufshcd_hba_init(hba);
 	if (err)
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 4683e7bf6640..269ddb92bb55 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -653,6 +653,7 @@ struct ufs_hba {
 	u32 eh_flags;
 	u32 intr_mask;
 	u16 ee_ctrl_mask;
+	u16 hba_enable_delay_us;
 	bool is_powered;
 
 	/* Work Queues */
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 6/8] scsi: ufs: allow customized delay for host enabling
@ 2020-03-13  9:01   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Currently a 1 ms delay is applied before polling CONTROLLER_ENABLE
bit. This delay may not be required or can be changed in different
controllers. Make the delay as a changeable value in struct ufs_hba to
allow it customized by vendors.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 drivers/scsi/ufs/ufshcd.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ce65d321a73f..dcbf45d547d8 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4298,7 +4298,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 	 * instruction might be read back.
 	 * This delay can be changed based on the controller.
 	 */
-	ufshcd_wait_us(1000, 100, true);
+	ufshcd_wait_us(hba->hba_enable_delay_us, 100, true);
 
 	/* wait for the host controller to complete initialization */
 	retry = 10;
@@ -8418,6 +8418,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 
 	hba->mmio_base = mmio_base;
 	hba->irq = irq;
+	hba->hba_enable_delay_us = 1000;
 
 	err = ufshcd_hba_init(hba);
 	if (err)
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 4683e7bf6640..269ddb92bb55 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -653,6 +653,7 @@ struct ufs_hba {
 	u32 eh_flags;
 	u32 intr_mask;
 	u16 ee_ctrl_mask;
+	u16 hba_enable_delay_us;
 	bool is_powered;
 
 	/* Work Queues */
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 6/8] scsi: ufs: allow customized delay for host enabling
@ 2020-03-13  9:01   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Currently a 1 ms delay is applied before polling CONTROLLER_ENABLE
bit. This delay may not be required or can be changed in different
controllers. Make the delay as a changeable value in struct ufs_hba to
allow it customized by vendors.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 3 ++-
 drivers/scsi/ufs/ufshcd.h | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ce65d321a73f..dcbf45d547d8 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4298,7 +4298,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 	 * instruction might be read back.
 	 * This delay can be changed based on the controller.
 	 */
-	ufshcd_wait_us(1000, 100, true);
+	ufshcd_wait_us(hba->hba_enable_delay_us, 100, true);
 
 	/* wait for the host controller to complete initialization */
 	retry = 10;
@@ -8418,6 +8418,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 
 	hba->mmio_base = mmio_base;
 	hba->irq = irq;
+	hba->hba_enable_delay_us = 1000;
 
 	err = ufshcd_hba_init(hba);
 	if (err)
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 4683e7bf6640..269ddb92bb55 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -653,6 +653,7 @@ struct ufs_hba {
 	u32 eh_flags;
 	u32 intr_mask;
 	u16 ee_ctrl_mask;
+	u16 hba_enable_delay_us;
 	bool is_powered;
 
 	/* Work Queues */
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 7/8] scsi: ufs: make HCE polling more compact to improve initializatoin latency
  2020-03-13  9:00 ` Stanley Chu
  (?)
@ 2020-03-13  9:01   ` Stanley Chu
  -1 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: beanhuo, asutoshd, cang, matthias.bgg, bvanassche,
	linux-mediatek, linux-arm-kernel, linux-kernel, kuohong.wang,
	peter.wang, chun-hung.wu, andy.teng, Stanley Chu

Reduce the waiting period between each HCE (Host Controller Enable)
polling from 5 ms to 1 ms. In the same time, increase the maximum polling
times to make "total polling time" unchanged approximately.

This change could make HCE initializatoin faster to improve latency of
ufshcd initialization, error recovery, and resume behaviors.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufshcd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index dcbf45d547d8..cd33d07c56cf 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4301,7 +4301,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 	ufshcd_wait_us(hba->hba_enable_delay_us, 100, true);
 
 	/* wait for the host controller to complete initialization */
-	retry = 10;
+	retry = 50;
 	while (ufshcd_is_hba_active(hba)) {
 		if (retry) {
 			retry--;
@@ -4310,7 +4310,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 				"Controller enable failed\n");
 			return -EIO;
 		}
-		ufshcd_wait_us(5000, 100, true);
+		ufshcd_wait_us(1000, 100, true);
 	}
 
 	/* enable UIC related interrupts */
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 7/8] scsi: ufs: make HCE polling more compact to improve initializatoin latency
@ 2020-03-13  9:01   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Reduce the waiting period between each HCE (Host Controller Enable)
polling from 5 ms to 1 ms. In the same time, increase the maximum polling
times to make "total polling time" unchanged approximately.

This change could make HCE initializatoin faster to improve latency of
ufshcd initialization, error recovery, and resume behaviors.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufshcd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index dcbf45d547d8..cd33d07c56cf 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4301,7 +4301,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 	ufshcd_wait_us(hba->hba_enable_delay_us, 100, true);
 
 	/* wait for the host controller to complete initialization */
-	retry = 10;
+	retry = 50;
 	while (ufshcd_is_hba_active(hba)) {
 		if (retry) {
 			retry--;
@@ -4310,7 +4310,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 				"Controller enable failed\n");
 			return -EIO;
 		}
-		ufshcd_wait_us(5000, 100, true);
+		ufshcd_wait_us(1000, 100, true);
 	}
 
 	/* enable UIC related interrupts */
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 7/8] scsi: ufs: make HCE polling more compact to improve initializatoin latency
@ 2020-03-13  9:01   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

Reduce the waiting period between each HCE (Host Controller Enable)
polling from 5 ms to 1 ms. In the same time, increase the maximum polling
times to make "total polling time" unchanged approximately.

This change could make HCE initializatoin faster to improve latency of
ufshcd initialization, error recovery, and resume behaviors.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufshcd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index dcbf45d547d8..cd33d07c56cf 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -4301,7 +4301,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 	ufshcd_wait_us(hba->hba_enable_delay_us, 100, true);
 
 	/* wait for the host controller to complete initialization */
-	retry = 10;
+	retry = 50;
 	while (ufshcd_is_hba_active(hba)) {
 		if (retry) {
 			retry--;
@@ -4310,7 +4310,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
 				"Controller enable failed\n");
 			return -EIO;
 		}
-		ufshcd_wait_us(5000, 100, true);
+		ufshcd_wait_us(1000, 100, true);
 	}
 
 	/* enable UIC related interrupts */
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 8/8] scsi: ufs-mediatek: customize the delay for host enabling
  2020-03-13  9:00 ` Stanley Chu
  (?)
@ 2020-03-13  9:01   ` Stanley Chu
  -1 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: beanhuo, asutoshd, cang, matthias.bgg, bvanassche,
	linux-mediatek, linux-arm-kernel, linux-kernel, kuohong.wang,
	peter.wang, chun-hung.wu, andy.teng, Stanley Chu

MediaTek platform and UFS controller can dynamically customize
the delay for host enabling according to different scenarios.

For example, if UniPro enters lower-power mode, such delay can
be minimized, otherwise longer delay shall be expected.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 43 ++++++++++++++++++++++++++-------
 drivers/scsi/ufs/ufs-mediatek.h |  1 +
 2 files changed, 35 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 0ff6781654fd..c0fd7d2e4d0d 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -30,11 +30,6 @@
 #define ufs_mtk_device_reset_ctrl(high, res) \
 	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, high, res)
 
-#define ufs_mtk_unipro_powerdown(hba, powerdown) \
-	ufshcd_dme_set(hba, \
-		       UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0), \
-		       powerdown)
-
 static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 {
 	u32 tmp;
@@ -71,6 +66,21 @@ static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 	}
 }
 
+static int ufs_mtk_hce_enable_notify(struct ufs_hba *hba,
+				     enum ufs_notify_change_status status)
+{
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	if (status == PRE_CHANGE) {
+		if (host->unipro_lpm)
+			hba->hba_enable_delay_us = 0;
+		else
+			hba->hba_enable_delay_us = 600;
+	}
+
+	return 0;
+}
+
 static int ufs_mtk_bind_mphy(struct ufs_hba *hba)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
@@ -324,12 +334,26 @@ static int ufs_mtk_pwr_change_notify(struct ufs_hba *hba,
 	return ret;
 }
 
+static int ufs_mtk_unipro_set_pm(struct ufs_hba *hba, u32 lpm)
+{
+	int ret;
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	ret = ufshcd_dme_set(hba,
+			     UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
+			     lpm);
+	if (!ret)
+		host->unipro_lpm = lpm;
+
+	return ret;
+}
+
 static int ufs_mtk_pre_link(struct ufs_hba *hba)
 {
 	int ret;
 	u32 tmp;
 
-	ufs_mtk_unipro_powerdown(hba, 0);
+	ufs_mtk_unipro_set_pm(hba, 0);
 
 	/*
 	 * Setting PA_Local_TX_LCC_Enable to 0 before link startup
@@ -437,7 +461,7 @@ static int ufs_mtk_link_set_hpm(struct ufs_hba *hba)
 	if (err)
 		return err;
 
-	err = ufs_mtk_unipro_powerdown(hba, 0);
+	err = ufs_mtk_unipro_set_pm(hba, 0);
 	if (err)
 		return err;
 
@@ -458,10 +482,10 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 {
 	int err;
 
-	err = ufs_mtk_unipro_powerdown(hba, 1);
+	err = ufs_mtk_unipro_set_pm(hba, 1);
 	if (err) {
 		/* Resume UniPro state for following error recovery */
-		ufs_mtk_unipro_powerdown(hba, 0);
+		ufs_mtk_unipro_set_pm(hba, 0);
 		return err;
 	}
 
@@ -552,6 +576,7 @@ static struct ufs_hba_variant_ops ufs_hba_mtk_vops = {
 	.name                = "mediatek.ufshci",
 	.init                = ufs_mtk_init,
 	.setup_clocks        = ufs_mtk_setup_clocks,
+	.hce_enable_notify   = ufs_mtk_hce_enable_notify,
 	.link_startup_notify = ufs_mtk_link_startup_notify,
 	.pwr_change_notify   = ufs_mtk_pwr_change_notify,
 	.apply_dev_quirks    = ufs_mtk_apply_dev_quirks,
diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h
index 4c787b99fe41..5bbd3e9cbae2 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/scsi/ufs/ufs-mediatek.h
@@ -91,6 +91,7 @@ enum {
 struct ufs_mtk_host {
 	struct ufs_hba *hba;
 	struct phy *mphy;
+	bool unipro_lpm;
 	bool ref_clk_enabled;
 	u16 ref_clk_ungating_wait_us;
 	u16 ref_clk_gating_wait_us;
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 8/8] scsi: ufs-mediatek: customize the delay for host enabling
@ 2020-03-13  9:01   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

MediaTek platform and UFS controller can dynamically customize
the delay for host enabling according to different scenarios.

For example, if UniPro enters lower-power mode, such delay can
be minimized, otherwise longer delay shall be expected.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 43 ++++++++++++++++++++++++++-------
 drivers/scsi/ufs/ufs-mediatek.h |  1 +
 2 files changed, 35 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 0ff6781654fd..c0fd7d2e4d0d 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -30,11 +30,6 @@
 #define ufs_mtk_device_reset_ctrl(high, res) \
 	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, high, res)
 
-#define ufs_mtk_unipro_powerdown(hba, powerdown) \
-	ufshcd_dme_set(hba, \
-		       UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0), \
-		       powerdown)
-
 static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 {
 	u32 tmp;
@@ -71,6 +66,21 @@ static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 	}
 }
 
+static int ufs_mtk_hce_enable_notify(struct ufs_hba *hba,
+				     enum ufs_notify_change_status status)
+{
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	if (status == PRE_CHANGE) {
+		if (host->unipro_lpm)
+			hba->hba_enable_delay_us = 0;
+		else
+			hba->hba_enable_delay_us = 600;
+	}
+
+	return 0;
+}
+
 static int ufs_mtk_bind_mphy(struct ufs_hba *hba)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
@@ -324,12 +334,26 @@ static int ufs_mtk_pwr_change_notify(struct ufs_hba *hba,
 	return ret;
 }
 
+static int ufs_mtk_unipro_set_pm(struct ufs_hba *hba, u32 lpm)
+{
+	int ret;
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	ret = ufshcd_dme_set(hba,
+			     UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
+			     lpm);
+	if (!ret)
+		host->unipro_lpm = lpm;
+
+	return ret;
+}
+
 static int ufs_mtk_pre_link(struct ufs_hba *hba)
 {
 	int ret;
 	u32 tmp;
 
-	ufs_mtk_unipro_powerdown(hba, 0);
+	ufs_mtk_unipro_set_pm(hba, 0);
 
 	/*
 	 * Setting PA_Local_TX_LCC_Enable to 0 before link startup
@@ -437,7 +461,7 @@ static int ufs_mtk_link_set_hpm(struct ufs_hba *hba)
 	if (err)
 		return err;
 
-	err = ufs_mtk_unipro_powerdown(hba, 0);
+	err = ufs_mtk_unipro_set_pm(hba, 0);
 	if (err)
 		return err;
 
@@ -458,10 +482,10 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 {
 	int err;
 
-	err = ufs_mtk_unipro_powerdown(hba, 1);
+	err = ufs_mtk_unipro_set_pm(hba, 1);
 	if (err) {
 		/* Resume UniPro state for following error recovery */
-		ufs_mtk_unipro_powerdown(hba, 0);
+		ufs_mtk_unipro_set_pm(hba, 0);
 		return err;
 	}
 
@@ -552,6 +576,7 @@ static struct ufs_hba_variant_ops ufs_hba_mtk_vops = {
 	.name                = "mediatek.ufshci",
 	.init                = ufs_mtk_init,
 	.setup_clocks        = ufs_mtk_setup_clocks,
+	.hce_enable_notify   = ufs_mtk_hce_enable_notify,
 	.link_startup_notify = ufs_mtk_link_startup_notify,
 	.pwr_change_notify   = ufs_mtk_pwr_change_notify,
 	.apply_dev_quirks    = ufs_mtk_apply_dev_quirks,
diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h
index 4c787b99fe41..5bbd3e9cbae2 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/scsi/ufs/ufs-mediatek.h
@@ -91,6 +91,7 @@ enum {
 struct ufs_mtk_host {
 	struct ufs_hba *hba;
 	struct phy *mphy;
+	bool unipro_lpm;
 	bool ref_clk_enabled;
 	u16 ref_clk_ungating_wait_us;
 	u16 ref_clk_gating_wait_us;
-- 
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* [PATCH v4 8/8] scsi: ufs-mediatek: customize the delay for host enabling
@ 2020-03-13  9:01   ` Stanley Chu
  0 siblings, 0 replies; 30+ messages in thread
From: Stanley Chu @ 2020-03-13  9:01 UTC (permalink / raw)
  To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
  Cc: Stanley Chu, bvanassche, andy.teng, chun-hung.wu, kuohong.wang,
	linux-kernel, cang, linux-mediatek, peter.wang, matthias.bgg,
	beanhuo, linux-arm-kernel, asutoshd

MediaTek platform and UFS controller can dynamically customize
the delay for host enabling according to different scenarios.

For example, if UniPro enters lower-power mode, such delay can
be minimized, otherwise longer delay shall be expected.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 43 ++++++++++++++++++++++++++-------
 drivers/scsi/ufs/ufs-mediatek.h |  1 +
 2 files changed, 35 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 0ff6781654fd..c0fd7d2e4d0d 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -30,11 +30,6 @@
 #define ufs_mtk_device_reset_ctrl(high, res) \
 	ufs_mtk_smc(UFS_MTK_SIP_DEVICE_RESET, high, res)
 
-#define ufs_mtk_unipro_powerdown(hba, powerdown) \
-	ufshcd_dme_set(hba, \
-		       UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0), \
-		       powerdown)
-
 static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 {
 	u32 tmp;
@@ -71,6 +66,21 @@ static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 	}
 }
 
+static int ufs_mtk_hce_enable_notify(struct ufs_hba *hba,
+				     enum ufs_notify_change_status status)
+{
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	if (status == PRE_CHANGE) {
+		if (host->unipro_lpm)
+			hba->hba_enable_delay_us = 0;
+		else
+			hba->hba_enable_delay_us = 600;
+	}
+
+	return 0;
+}
+
 static int ufs_mtk_bind_mphy(struct ufs_hba *hba)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
@@ -324,12 +334,26 @@ static int ufs_mtk_pwr_change_notify(struct ufs_hba *hba,
 	return ret;
 }
 
+static int ufs_mtk_unipro_set_pm(struct ufs_hba *hba, u32 lpm)
+{
+	int ret;
+	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
+
+	ret = ufshcd_dme_set(hba,
+			     UIC_ARG_MIB_SEL(VS_UNIPROPOWERDOWNCONTROL, 0),
+			     lpm);
+	if (!ret)
+		host->unipro_lpm = lpm;
+
+	return ret;
+}
+
 static int ufs_mtk_pre_link(struct ufs_hba *hba)
 {
 	int ret;
 	u32 tmp;
 
-	ufs_mtk_unipro_powerdown(hba, 0);
+	ufs_mtk_unipro_set_pm(hba, 0);
 
 	/*
 	 * Setting PA_Local_TX_LCC_Enable to 0 before link startup
@@ -437,7 +461,7 @@ static int ufs_mtk_link_set_hpm(struct ufs_hba *hba)
 	if (err)
 		return err;
 
-	err = ufs_mtk_unipro_powerdown(hba, 0);
+	err = ufs_mtk_unipro_set_pm(hba, 0);
 	if (err)
 		return err;
 
@@ -458,10 +482,10 @@ static int ufs_mtk_link_set_lpm(struct ufs_hba *hba)
 {
 	int err;
 
-	err = ufs_mtk_unipro_powerdown(hba, 1);
+	err = ufs_mtk_unipro_set_pm(hba, 1);
 	if (err) {
 		/* Resume UniPro state for following error recovery */
-		ufs_mtk_unipro_powerdown(hba, 0);
+		ufs_mtk_unipro_set_pm(hba, 0);
 		return err;
 	}
 
@@ -552,6 +576,7 @@ static struct ufs_hba_variant_ops ufs_hba_mtk_vops = {
 	.name                = "mediatek.ufshci",
 	.init                = ufs_mtk_init,
 	.setup_clocks        = ufs_mtk_setup_clocks,
+	.hce_enable_notify   = ufs_mtk_hce_enable_notify,
 	.link_startup_notify = ufs_mtk_link_startup_notify,
 	.pwr_change_notify   = ufs_mtk_pwr_change_notify,
 	.apply_dev_quirks    = ufs_mtk_apply_dev_quirks,
diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h
index 4c787b99fe41..5bbd3e9cbae2 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/scsi/ufs/ufs-mediatek.h
@@ -91,6 +91,7 @@ enum {
 struct ufs_mtk_host {
 	struct ufs_hba *hba;
 	struct phy *mphy;
+	bool unipro_lpm;
 	bool ref_clk_enabled;
 	u16 ref_clk_ungating_wait_us;
 	u16 ref_clk_gating_wait_us;
-- 
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply related	[flat|nested] 30+ messages in thread

* RE: [PATCH v4 0/8] scsi: ufs: some cleanups and make the delay for host enabling customizable
  2020-03-13  9:00 ` Stanley Chu
  (?)
@ 2020-03-14  9:47   ` Avri Altman
  -1 siblings, 0 replies; 30+ messages in thread
From: Avri Altman @ 2020-03-14  9:47 UTC (permalink / raw)
  To: Stanley Chu, linux-scsi, martin.petersen, alim.akhtar, jejb
  Cc: beanhuo, asutoshd, cang, matthias.bgg, bvanassche,
	linux-mediatek, linux-arm-kernel, linux-kernel, kuohong.wang,
	peter.wang, chun-hung.wu, andy.teng

Looks good to me.
Thanks,
Avri

 
> 
> Hi,
> 
> This patchset applies some driver cleanups and performance improvement
> in ufs host drivers by making the delay for host enabling customizable
> according to vendors' requirements.
> 
> v3 -> v4
>         - Collect review tags in v2
>         - In patch #8, fix incorrect condition of customized delay for host
> enabling
> 
> v2 -> v3
>         - Remove /arch/arm64/configs/defconfig chnage because it is for local
> test only
> 
> v1 -> v2
>         - Add patch #1 "scsi: ufs: fix uninitialized tx_lanes in
> ufshcd_disable_tx_lcc"
>         - Remove struct ufs_init_prefetch in patch #2 "scsi: ufs: remove
> init_prefetch_data in struct ufs_hba"
>         - Introduce common delay function in patch #4
>         - Replace all delay places by common delay function in ufs-mediatek in
> patch #5
>         - Use common delay function instead for host enabling delay in patch #6
>         - Add patch #7 "scsi: ufs: make HCE polling more compact to improve
> initializatoin latency"
>         - In patch #8, customize the delay in ufs_mtk_hce_enable_notify
> callback instead of ufs_mtk_init (Avri)
> 
>  drivers/scsi/ufs/ufs-mediatek.c | 64 ++++++++++++++++-----------
>  drivers/scsi/ufs/ufs-mediatek.h |  1 +
>  drivers/scsi/ufs/ufshcd.c       | 47 +++++++++++---------
>  drivers/scsi/ufs/ufshcd.h       | 78 ++++++++++++++++-----------------
>  4 files changed, 106 insertions(+), 84 deletions(-)
> 
> --
> 2.18.0

^ permalink raw reply	[flat|nested] 30+ messages in thread

* RE: [PATCH v4 0/8] scsi: ufs: some cleanups and make the delay for host enabling customizable
@ 2020-03-14  9:47   ` Avri Altman
  0 siblings, 0 replies; 30+ messages in thread
From: Avri Altman @ 2020-03-14  9:47 UTC (permalink / raw)
  To: Stanley Chu, linux-scsi, martin.petersen, alim.akhtar, jejb
  Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
	cang, linux-mediatek, peter.wang, matthias.bgg, beanhuo,
	linux-arm-kernel, asutoshd

Looks good to me.
Thanks,
Avri

 
> 
> Hi,
> 
> This patchset applies some driver cleanups and performance improvement
> in ufs host drivers by making the delay for host enabling customizable
> according to vendors' requirements.
> 
> v3 -> v4
>         - Collect review tags in v2
>         - In patch #8, fix incorrect condition of customized delay for host
> enabling
> 
> v2 -> v3
>         - Remove /arch/arm64/configs/defconfig chnage because it is for local
> test only
> 
> v1 -> v2
>         - Add patch #1 "scsi: ufs: fix uninitialized tx_lanes in
> ufshcd_disable_tx_lcc"
>         - Remove struct ufs_init_prefetch in patch #2 "scsi: ufs: remove
> init_prefetch_data in struct ufs_hba"
>         - Introduce common delay function in patch #4
>         - Replace all delay places by common delay function in ufs-mediatek in
> patch #5
>         - Use common delay function instead for host enabling delay in patch #6
>         - Add patch #7 "scsi: ufs: make HCE polling more compact to improve
> initializatoin latency"
>         - In patch #8, customize the delay in ufs_mtk_hce_enable_notify
> callback instead of ufs_mtk_init (Avri)
> 
>  drivers/scsi/ufs/ufs-mediatek.c | 64 ++++++++++++++++-----------
>  drivers/scsi/ufs/ufs-mediatek.h |  1 +
>  drivers/scsi/ufs/ufshcd.c       | 47 +++++++++++---------
>  drivers/scsi/ufs/ufshcd.h       | 78 ++++++++++++++++-----------------
>  4 files changed, 106 insertions(+), 84 deletions(-)
> 
> --
> 2.18.0

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 30+ messages in thread

* RE: [PATCH v4 0/8] scsi: ufs: some cleanups and make the delay for host enabling customizable
@ 2020-03-14  9:47   ` Avri Altman
  0 siblings, 0 replies; 30+ messages in thread
From: Avri Altman @ 2020-03-14  9:47 UTC (permalink / raw)
  To: Stanley Chu, linux-scsi, martin.petersen, alim.akhtar, jejb
  Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
	cang, linux-mediatek, peter.wang, matthias.bgg, beanhuo,
	linux-arm-kernel, asutoshd

Looks good to me.
Thanks,
Avri

 
> 
> Hi,
> 
> This patchset applies some driver cleanups and performance improvement
> in ufs host drivers by making the delay for host enabling customizable
> according to vendors' requirements.
> 
> v3 -> v4
>         - Collect review tags in v2
>         - In patch #8, fix incorrect condition of customized delay for host
> enabling
> 
> v2 -> v3
>         - Remove /arch/arm64/configs/defconfig chnage because it is for local
> test only
> 
> v1 -> v2
>         - Add patch #1 "scsi: ufs: fix uninitialized tx_lanes in
> ufshcd_disable_tx_lcc"
>         - Remove struct ufs_init_prefetch in patch #2 "scsi: ufs: remove
> init_prefetch_data in struct ufs_hba"
>         - Introduce common delay function in patch #4
>         - Replace all delay places by common delay function in ufs-mediatek in
> patch #5
>         - Use common delay function instead for host enabling delay in patch #6
>         - Add patch #7 "scsi: ufs: make HCE polling more compact to improve
> initializatoin latency"
>         - In patch #8, customize the delay in ufs_mtk_hce_enable_notify
> callback instead of ufs_mtk_init (Avri)
> 
>  drivers/scsi/ufs/ufs-mediatek.c | 64 ++++++++++++++++-----------
>  drivers/scsi/ufs/ufs-mediatek.h |  1 +
>  drivers/scsi/ufs/ufshcd.c       | 47 +++++++++++---------
>  drivers/scsi/ufs/ufshcd.h       | 78 ++++++++++++++++-----------------
>  4 files changed, 106 insertions(+), 84 deletions(-)
> 
> --
> 2.18.0

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 30+ messages in thread

end of thread, other threads:[~2020-03-15  2:10 UTC | newest]

Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-13  9:00 [PATCH v4 0/8] scsi: ufs: some cleanups and make the delay for host enabling customizable Stanley Chu
2020-03-13  9:00 ` Stanley Chu
2020-03-13  9:00 ` Stanley Chu
2020-03-13  9:00 ` [PATCH v4 1/8] scsi: ufs: fix uninitialized tx_lanes in ufshcd_disable_tx_lcc() Stanley Chu
2020-03-13  9:00   ` Stanley Chu
2020-03-13  9:00   ` Stanley Chu
2020-03-13  9:00 ` [PATCH v4 2/8] scsi: ufs: remove init_prefetch_data in struct ufs_hba Stanley Chu
2020-03-13  9:00   ` Stanley Chu
2020-03-13  9:00   ` Stanley Chu
2020-03-13  9:00 ` [PATCH v4 3/8] scsi: ufs: use an enum for host capabilities Stanley Chu
2020-03-13  9:00   ` Stanley Chu
2020-03-13  9:00   ` Stanley Chu
2020-03-13  9:00 ` [PATCH v4 4/8] scsi: ufs: introduce common delay function Stanley Chu
2020-03-13  9:00   ` Stanley Chu
2020-03-13  9:00   ` Stanley Chu
2020-03-13  9:01 ` [PATCH v4 5/8] scsi: ufs-mediatek: replace all delay places by " Stanley Chu
2020-03-13  9:01   ` Stanley Chu
2020-03-13  9:01   ` Stanley Chu
2020-03-13  9:01 ` [PATCH v4 6/8] scsi: ufs: allow customized delay for host enabling Stanley Chu
2020-03-13  9:01   ` Stanley Chu
2020-03-13  9:01   ` Stanley Chu
2020-03-13  9:01 ` [PATCH v4 7/8] scsi: ufs: make HCE polling more compact to improve initializatoin latency Stanley Chu
2020-03-13  9:01   ` Stanley Chu
2020-03-13  9:01   ` Stanley Chu
2020-03-13  9:01 ` [PATCH v4 8/8] scsi: ufs-mediatek: customize the delay for host enabling Stanley Chu
2020-03-13  9:01   ` Stanley Chu
2020-03-13  9:01   ` Stanley Chu
2020-03-14  9:47 ` [PATCH v4 0/8] scsi: ufs: some cleanups and make the delay for host enabling customizable Avri Altman
2020-03-14  9:47   ` Avri Altman
2020-03-14  9:47   ` Avri Altman

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.