[PATCH v2 18/25] mtd: spi-nor: Move SST bits out of core.c

[<Tudor.Ambarus@microchip.com>]

From: Boris Brezillon <bbrezillon@kernel.org>

Create a SPI NOR manufacturer driver for SST chips, and move the
SST definitions outside of core.c.

Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/Makefile |   1 +
 drivers/mtd/spi-nor/core.c   | 123 +---------------------------
 drivers/mtd/spi-nor/core.h   |   1 +
 drivers/mtd/spi-nor/sst.c    | 151 +++++++++++++++++++++++++++++++++++
 4 files changed, 156 insertions(+), 120 deletions(-)
 create mode 100644 drivers/mtd/spi-nor/sst.c

diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index cb06ee50bf68..ef7afc654a15 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -12,4 +12,5 @@ spi-nor-objs			+= issi.o
 spi-nor-objs			+= macronix.o
 spi-nor-objs			+= micron-st.o
 spi-nor-objs			+= spansion.o
+spi-nor-objs			+= sst.o
 obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 1500951254d9..c81eac6e9731 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1995,25 +1995,6 @@ int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
  * old entries may be missing 4K flag.
  */
 static const struct flash_info spi_nor_ids[] = {
-	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
-	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
-	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
-	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32, SECT_4K | SST_WRITE) },
-	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64, SECT_4K | SST_WRITE) },
-	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
-	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1, SECT_4K | SST_WRITE) },
-	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2, SECT_4K | SST_WRITE) },
-	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4, SECT_4K | SST_WRITE) },
-	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4, SECT_4K) },
-	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8, SECT_4K) },
-	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8, SECT_4K | SST_WRITE) },
-	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16, SECT_4K | SST_WRITE) },
-	{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32, SECT_4K |
-			      SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-	{ "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32, SECT_4K |
-			      SPI_NOR_DUAL_READ) },
-	{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-
 	/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
 	{ "w25x05", INFO(0xef3010, 0, 64 * 1024,  1,  SECT_4K) },
 	{ "w25x10", INFO(0xef3011, 0, 64 * 1024,  2,  SECT_4K) },
@@ -2114,6 +2095,7 @@ static const struct spi_nor_manufacturer *manufacturers[] = {
 	&spi_nor_micron,
 	&spi_nor_st,
 	&spi_nor_spansion,
+	&spi_nor_sst,
 };
 
 static const struct flash_info *
@@ -2214,92 +2196,6 @@ static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len,
 	return ret;
 }
 
-static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
-		size_t *retlen, const u_char *buf)
-{
-	struct spi_nor *nor = mtd_to_spi_nor(mtd);
-	size_t actual = 0;
-	int ret;
-
-	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
-
-	ret = spi_nor_lock_and_prep(nor);
-	if (ret)
-		return ret;
-
-	ret = spi_nor_write_enable(nor);
-	if (ret)
-		goto out;
-
-	nor->sst_write_second = false;
-
-	/* Start write from odd address. */
-	if (to % 2) {
-		nor->program_opcode = SPINOR_OP_BP;
-
-		/* write one byte. */
-		ret = spi_nor_write_data(nor, to, 1, buf);
-		if (ret < 0)
-			goto out;
-		WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
-		ret = spi_nor_wait_till_ready(nor);
-		if (ret)
-			goto out;
-
-		to++;
-		actual++;
-	}
-
-	/* Write out most of the data here. */
-	for (; actual < len - 1; actual += 2) {
-		nor->program_opcode = SPINOR_OP_AAI_WP;
-
-		/* write two bytes. */
-		ret = spi_nor_write_data(nor, to, 2, buf + actual);
-		if (ret < 0)
-			goto out;
-		WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ret);
-		ret = spi_nor_wait_till_ready(nor);
-		if (ret)
-			goto out;
-		to += 2;
-		nor->sst_write_second = true;
-	}
-	nor->sst_write_second = false;
-
-	ret = spi_nor_write_disable(nor);
-	if (ret)
-		goto out;
-
-	ret = spi_nor_wait_till_ready(nor);
-	if (ret)
-		goto out;
-
-	/* Write out trailing byte if it exists. */
-	if (actual != len) {
-		ret = spi_nor_write_enable(nor);
-		if (ret)
-			goto out;
-
-		nor->program_opcode = SPINOR_OP_BP;
-		ret = spi_nor_write_data(nor, to, 1, buf + actual);
-		if (ret < 0)
-			goto out;
-		WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
-		ret = spi_nor_wait_till_ready(nor);
-		if (ret)
-			goto out;
-
-		actual += 1;
-
-		ret = spi_nor_write_disable(nor);
-	}
-out:
-	*retlen += actual;
-	spi_nor_unlock_and_unprep(nor);
-	return ret;
-}
-
 /*
  * Write an address range to the nor chip.  Data must be written in
  * FLASH_PAGESIZE chunks.  The address range may be any size provided
@@ -2893,11 +2789,6 @@ static int spi_nor_setup(struct spi_nor *nor,
 	return nor->params.setup(nor, hwcaps);
 }
 
-static void sst_set_default_init(struct spi_nor *nor)
-{
-	nor->flags |= SNOR_F_HAS_LOCK;
-}
-
 static void winbond_set_default_init(struct spi_nor *nor)
 {
 	nor->params.set_4byte_addr_mode = winbond_set_4byte_addr_mode;
@@ -2912,10 +2803,6 @@ static void spi_nor_manufacturer_init_params(struct spi_nor *nor)
 {
 	/* Init flash parameters based on MFR */
 	switch (JEDEC_MFR(nor->info)) {
-	case SNOR_MFR_SST:
-		sst_set_default_init(nor);
-		break;
-
 	case SNOR_MFR_WINBOND:
 		winbond_set_default_init(nor);
 		break;
@@ -3387,6 +3274,8 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 	if (info->flags & SPI_NOR_HAS_LOCK)
 		nor->flags |= SNOR_F_HAS_LOCK;
 
+	mtd->_write = spi_nor_write;
+
 	/* Init flash parameters based on flash_info struct and SFDP */
 	spi_nor_init_params(nor);
 
@@ -3407,12 +3296,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 		mtd->_is_locked = spi_nor_is_locked;
 	}
 
-	/* sst nor chips use AAI word program */
-	if (info->flags & SST_WRITE)
-		mtd->_write = sst_write;
-	else
-		mtd->_write = spi_nor_write;
-
 	if (info->flags & USE_FSR)
 		nor->flags |= SNOR_F_USE_FSR;
 	if (info->flags & SPI_NOR_HAS_TB) {
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index 470025131d47..e49a2200a90d 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -179,6 +179,7 @@ extern const struct spi_nor_manufacturer spi_nor_macronix;
 extern const struct spi_nor_manufacturer spi_nor_micron;
 extern const struct spi_nor_manufacturer spi_nor_st;
 extern const struct spi_nor_manufacturer spi_nor_spansion;
+extern const struct spi_nor_manufacturer spi_nor_sst;
 
 int spi_nor_write_enable(struct spi_nor *nor);
 int spi_nor_write_disable(struct spi_nor *nor);
diff --git a/drivers/mtd/spi-nor/sst.c b/drivers/mtd/spi-nor/sst.c
new file mode 100644
index 000000000000..e0af6d25d573
--- /dev/null
+++ b/drivers/mtd/spi-nor/sst.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+static const struct flash_info sst_parts[] = {
+	/* SST -- large erase sizes are "overlays", "sectors" are 4K */
+	{ "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024,  8,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25vf080b", INFO(0xbf258e, 0, 64 * 1024, 16,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25vf016b", INFO(0xbf2541, 0, 64 * 1024, 32,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25vf032b", INFO(0xbf254a, 0, 64 * 1024, 64,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25vf064c", INFO(0xbf254b, 0, 64 * 1024, 128, SECT_4K) },
+	{ "sst25wf512",  INFO(0xbf2501, 0, 64 * 1024,  1,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25wf010",  INFO(0xbf2502, 0, 64 * 1024,  2,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25wf020",  INFO(0xbf2503, 0, 64 * 1024,  4,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25wf020a", INFO(0x621612, 0, 64 * 1024,  4, SECT_4K) },
+	{ "sst25wf040b", INFO(0x621613, 0, 64 * 1024,  8, SECT_4K) },
+	{ "sst25wf040",  INFO(0xbf2504, 0, 64 * 1024,  8,
+			      SECT_4K | SST_WRITE) },
+	{ "sst25wf080",  INFO(0xbf2505, 0, 64 * 1024, 16,
+			      SECT_4K | SST_WRITE) },
+	{ "sst26wf016b", INFO(0xbf2651, 0, 64 * 1024, 32,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+	{ "sst26vf016b", INFO(0xbf2641, 0, 64 * 1024, 32,
+			      SECT_4K | SPI_NOR_DUAL_READ) },
+	{ "sst26vf064b", INFO(0xbf2643, 0, 64 * 1024, 128,
+			      SECT_4K | SPI_NOR_DUAL_READ |
+			      SPI_NOR_QUAD_READ) },
+};
+
+static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
+		     size_t *retlen, const u_char *buf)
+{
+	struct spi_nor *nor = mtd_to_spi_nor(mtd);
+	size_t actual = 0;
+	int ret;
+
+	dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len);
+
+	ret = spi_nor_lock_and_prep(nor);
+	if (ret)
+		return ret;
+
+	ret = spi_nor_write_enable(nor);
+	if (ret)
+		goto out;
+
+	nor->sst_write_second = false;
+
+	/* Start write from odd address. */
+	if (to % 2) {
+		nor->program_opcode = SPINOR_OP_BP;
+
+		/* write one byte. */
+		ret = spi_nor_write_data(nor, to, 1, buf);
+		if (ret < 0)
+			goto out;
+		WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto out;
+
+		to++;
+		actual++;
+	}
+
+	/* Write out most of the data here. */
+	for (; actual < len - 1; actual += 2) {
+		nor->program_opcode = SPINOR_OP_AAI_WP;
+
+		/* write two bytes. */
+		ret = spi_nor_write_data(nor, to, 2, buf + actual);
+		if (ret < 0)
+			goto out;
+		WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ret);
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto out;
+		to += 2;
+		nor->sst_write_second = true;
+	}
+	nor->sst_write_second = false;
+
+	ret = spi_nor_write_disable(nor);
+	if (ret)
+		goto out;
+
+	ret = spi_nor_wait_till_ready(nor);
+	if (ret)
+		goto out;
+
+	/* Write out trailing byte if it exists. */
+	if (actual != len) {
+		ret = spi_nor_write_enable(nor);
+		if (ret)
+			goto out;
+
+		nor->program_opcode = SPINOR_OP_BP;
+		ret = spi_nor_write_data(nor, to, 1, buf + actual);
+		if (ret < 0)
+			goto out;
+		WARN(ret != 1, "While writing 1 byte written %i bytes\n", ret);
+		ret = spi_nor_wait_till_ready(nor);
+		if (ret)
+			goto out;
+
+		actual += 1;
+
+		ret = spi_nor_write_disable(nor);
+	}
+out:
+	*retlen += actual;
+	spi_nor_unlock_and_unprep(nor);
+	return ret;
+}
+
+static void sst_default_init(struct spi_nor *nor)
+{
+	nor->flags |= SNOR_F_HAS_LOCK;
+}
+
+static void sst_post_sfdp_fixups(struct spi_nor *nor)
+{
+	if (nor->info->flags & SST_WRITE)
+		nor->mtd._write = sst_write;
+}
+
+static const struct spi_nor_fixups sst_fixups = {
+	.default_init = sst_default_init,
+	.post_sfdp = sst_post_sfdp_fixups,
+};
+
+const struct spi_nor_manufacturer spi_nor_sst = {
+	.name = "sst",
+	.parts = sst_parts,
+	.nparts = ARRAY_SIZE(sst_parts),
+	.fixups = &sst_fixups,
+};
-- 
2.23.0

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/