All of lore.kernel.org
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: [PATCH v3 0/5] mainline Protonic boards
Date: Tue, 24 Mar 2020 12:04:27 +0100	[thread overview]
Message-ID: <20200324110432.25062-1-o.rempel@pengutronix.de> (raw)

changes v3:
- move compatible to the start of node
- move status to the end
- use generic names in compatible
- refactor dts/dtsi
- use alphabet order for pinctrl and phandels
- remove unused or currently not supported nodes

changes v2:
- squash PRTI6Q patches

Oleksij Rempel (5):
  dt-bindings: vendor-prefixes: Add an entry for Protonic Holland
  ARM: dts: add Protonic PRTI6Q board
  ARM: dts: add Protonic WD2 board
  ARM: dts: add Protonic VT7 board
  ARM: dts: add Protonic RVT board

 .../devicetree/bindings/arm/fsl.yaml          |   4 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   4 +
 arch/arm/boot/dts/imx6dl-prtrvt.dts           | 203 +++++++
 arch/arm/boot/dts/imx6dl-prtvt7.dts           | 474 +++++++++++++++
 arch/arm/boot/dts/imx6q-prti6q.dts            | 551 ++++++++++++++++++
 arch/arm/boot/dts/imx6q-prtwd2.dts            | 188 ++++++
 arch/arm/boot/dts/imx6qdl-prti6q.dtsi         | 185 ++++++
 8 files changed, 1611 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-prtrvt.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-prtvt7.dts
 create mode 100644 arch/arm/boot/dts/imx6q-prti6q.dts
 create mode 100644 arch/arm/boot/dts/imx6q-prtwd2.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-prti6q.dtsi

-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Mark Rutland <mark.rutland@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Oleksij Rempel <o.rempel@pengutronix.de>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 0/5] mainline Protonic boards
Date: Tue, 24 Mar 2020 12:04:27 +0100	[thread overview]
Message-ID: <20200324110432.25062-1-o.rempel@pengutronix.de> (raw)

changes v3:
- move compatible to the start of node
- move status to the end
- use generic names in compatible
- refactor dts/dtsi
- use alphabet order for pinctrl and phandels
- remove unused or currently not supported nodes

changes v2:
- squash PRTI6Q patches

Oleksij Rempel (5):
  dt-bindings: vendor-prefixes: Add an entry for Protonic Holland
  ARM: dts: add Protonic PRTI6Q board
  ARM: dts: add Protonic WD2 board
  ARM: dts: add Protonic VT7 board
  ARM: dts: add Protonic RVT board

 .../devicetree/bindings/arm/fsl.yaml          |   4 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   4 +
 arch/arm/boot/dts/imx6dl-prtrvt.dts           | 203 +++++++
 arch/arm/boot/dts/imx6dl-prtvt7.dts           | 474 +++++++++++++++
 arch/arm/boot/dts/imx6q-prti6q.dts            | 551 ++++++++++++++++++
 arch/arm/boot/dts/imx6q-prtwd2.dts            | 188 ++++++
 arch/arm/boot/dts/imx6qdl-prti6q.dtsi         | 185 ++++++
 8 files changed, 1611 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-prtrvt.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-prtvt7.dts
 create mode 100644 arch/arm/boot/dts/imx6q-prti6q.dts
 create mode 100644 arch/arm/boot/dts/imx6q-prtwd2.dts
 create mode 100644 arch/arm/boot/dts/imx6qdl-prti6q.dtsi

-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-03-24 11:05 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-24 11:04 Oleksij Rempel [this message]
2020-03-24 11:04 ` [PATCH v3 0/5] mainline Protonic boards Oleksij Rempel
2020-03-24 11:04 ` [PATCH v3 1/5] dt-bindings: vendor-prefixes: Add an entry for Protonic Holland Oleksij Rempel
2020-03-24 11:04   ` Oleksij Rempel
2020-03-24 11:04 ` [PATCH v3 2/5] ARM: dts: add Protonic PRTI6Q board Oleksij Rempel
2020-03-24 11:04   ` Oleksij Rempel
2020-04-21  4:07   ` Shawn Guo
2020-04-21  4:07     ` Shawn Guo
2020-04-21  7:37     ` Oleksij Rempel
2020-04-21  7:37       ` Oleksij Rempel
2020-04-21  7:39       ` Oleksij Rempel
2020-04-21  7:39         ` Oleksij Rempel
2020-04-21  4:09   ` Shawn Guo
2020-04-21  4:09     ` Shawn Guo
2020-03-24 11:04 ` [PATCH v3 3/5] ARM: dts: add Protonic WD2 board Oleksij Rempel
2020-03-24 11:04   ` Oleksij Rempel
2020-03-24 11:04 ` [PATCH v3 4/5] ARM: dts: add Protonic VT7 board Oleksij Rempel
2020-03-24 11:04   ` Oleksij Rempel
2020-03-24 11:04 ` [PATCH v3 5/5] ARM: dts: add Protonic RVT board Oleksij Rempel
2020-03-24 11:04   ` Oleksij Rempel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200324110432.25062-1-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.