All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v5 1/5] cmd: mvebu: bubt: add A38x support
@ 2020-03-24 14:23 Joel Johnson
  2020-03-24 14:23 ` [PATCH v5 2/5] cmd: mvebu: bubt: correct U-Boot spelling Joel Johnson
                   ` (3 more replies)
  0 siblings, 4 replies; 6+ messages in thread
From: Joel Johnson @ 2020-03-24 14:23 UTC (permalink / raw)
  To: u-boot

Add support for Armada 38x devices in bubt flashing utility.
This is based on (and streamlined from) the support in the SolidRun
master-a38x vendor fork.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Stefan Roese <sr@denx.de>

---

v2 changes
  - none
v3 changes
  - none
v4 changes
  - none
v5 changes
  - none

---
 cmd/mvebu/bubt.c | 69 +++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 68 insertions(+), 1 deletion(-)

diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c
index 2041a7a29a..d399fb6da4 100644
--- a/cmd/mvebu/bubt.c
+++ b/cmd/mvebu/bubt.c
@@ -85,7 +85,29 @@ struct mvebu_image_info {
 	u32	encrypt_start_offset;
 	u32	encrypt_size;
 };
-#endif /* CONFIG_ARMADA_XXX */
+#elif defined(CONFIG_ARMADA_38X)	/* A38X */
+
+/* Structure of the main header, version 1 (Armada 370/38x/XP) */
+struct a38x_main_hdr_v1 {
+	u8  blockid;               /* 0x0       */
+	u8  flags;                 /* 0x1       */
+	u16 reserved2;             /* 0x2-0x3   */
+	u32 blocksize;             /* 0x4-0x7   */
+	u8  version;               /* 0x8       */
+	u8  headersz_msb;          /* 0x9       */
+	u16 headersz_lsb;          /* 0xA-0xB   */
+	u32 srcaddr;               /* 0xC-0xF   */
+	u32 destaddr;              /* 0x10-0x13 */
+	u32 execaddr;              /* 0x14-0x17 */
+	u8  options;               /* 0x18      */
+	u8  nandblocksize;         /* 0x19      */
+	u8  nandbadblklocation;    /* 0x1A      */
+	u8  reserved4;             /* 0x1B      */
+	u16 reserved5;             /* 0x1C-0x1D */
+	u8  ext;                   /* 0x1E      */
+	u8  checksum;              /* 0x1F      */
+};
+#endif
 
 struct bubt_dev {
 	char name[8];
@@ -621,7 +643,52 @@ static int check_image_header(void)
 
 	return 0;
 }
+#elif defined(CONFIG_ARMADA_38X)
+static size_t a38x_header_size(const struct a38x_main_hdr_v1 *h)
+{
+	if (h->version == 1)
+		return (h->headersz_msb << 16) | le16_to_cpu(h->headersz_lsb);
+
+	printf("Error: Invalid A38x image (header version 0x%x unknown)!\n",
+	       h->version);
+	return 0;
+}
+
+static uint8_t image_checksum8(const void *start, size_t len)
+{
+	u8 csum = 0;
+	const u8 *p = start;
+
+	while (len) {
+		csum += *p;
+		++p;
+		--len;
+	}
+
+	return csum;
+}
 
+static int check_image_header(void)
+{
+	u8 checksum;
+	const struct a38x_main_hdr_v1 *hdr =
+		(struct a38x_main_hdr_v1 *)get_load_addr();
+	const size_t image_size = a38x_header_size(hdr);
+
+	if (!image_size)
+		return -ENOEXEC;
+
+	checksum = image_checksum8(hdr, image_size);
+	checksum -= hdr->checksum;
+	if (checksum != hdr->checksum) {
+		printf("Error: Bad A38x image checksum. 0x%x != 0x%x\n",
+		       checksum, hdr->checksum);
+		return -ENOEXEC;
+	}
+
+	printf("Image checksum...OK!\n");
+	return 0;
+}
 #else /* Not ARMADA? */
 static int check_image_header(void)
 {
-- 
2.25.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v5 2/5] cmd: mvebu: bubt: correct U-Boot spelling
  2020-03-24 14:23 [PATCH v5 1/5] cmd: mvebu: bubt: add A38x support Joel Johnson
@ 2020-03-24 14:23 ` Joel Johnson
  2020-03-24 14:23 ` [PATCH v5 3/5] cmd: mvebu: bubt: verify A38x target device type Joel Johnson
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 6+ messages in thread
From: Joel Johnson @ 2020-03-24 14:23 UTC (permalink / raw)
  To: u-boot

Replace "U-BOOT" text with correct spelling

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Stefan Roese <sr@denx.de>

---

v2 changes:
  - none
v3 changes:
  - none
v4 changes:
  - none
v5 changes:
  - none

---
 cmd/mvebu/bubt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c
index d399fb6da4..b80b81c82a 100644
--- a/cmd/mvebu/bubt.c
+++ b/cmd/mvebu/bubt.c
@@ -346,7 +346,7 @@ static int nand_burn_image(size_t image_size)
 	/* Align U-Boot size to currently used blocksize */
 	image_size = ((image_size + (block_size - 1)) & (~(block_size - 1)));
 
-	/* Erase the U-BOOT image space */
+	/* Erase the U-Boot image space */
 	printf("Erasing 0x%x - 0x%x:...", 0, (int)image_size);
 	ret = nand_erase(mtd, 0, image_size);
 	if (ret) {
@@ -734,7 +734,7 @@ static int bubt_read_file(struct bubt_dev *src)
 static int bubt_is_dev_active(struct bubt_dev *dev)
 {
 	if (!dev->active) {
-		printf("Device \"%s\" not supported by U-BOOT image\n",
+		printf("Device \"%s\" not supported by U-Boot image\n",
 		       dev->name);
 		return 0;
 	}
@@ -822,7 +822,7 @@ int do_bubt_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	if (!bubt_is_dev_active(src))
 		return -ENODEV;
 
-	printf("Burning U-BOOT image \"%s\" from \"%s\" to \"%s\"\n",
+	printf("Burning U-Boot image \"%s\" from \"%s\" to \"%s\"\n",
 	       net_boot_file_name, src->name, dst->name);
 
 	image_size = bubt_read_file(src);
-- 
2.25.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v5 3/5] cmd: mvebu: bubt: verify A38x target device type
  2020-03-24 14:23 [PATCH v5 1/5] cmd: mvebu: bubt: add A38x support Joel Johnson
  2020-03-24 14:23 ` [PATCH v5 2/5] cmd: mvebu: bubt: correct U-Boot spelling Joel Johnson
@ 2020-03-24 14:23 ` Joel Johnson
  2020-04-14  8:40   ` Stefan Roese
  2020-03-24 14:23 ` [PATCH v5 4/5] arm: mvebu: clearfog: enable bubt command Joel Johnson
  2020-03-24 14:23 ` [PATCH v5 5/5] cmd: mvebu: bubt: show image boot device Joel Johnson
  3 siblings, 1 reply; 6+ messages in thread
From: Joel Johnson @ 2020-03-24 14:23 UTC (permalink / raw)
  To: u-boot

Ensure that the device to which an image is being written includes
header information indicating boot support for the destination
device.

This is derived from the support in the SolidRun master-a38x vendor
fork.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Stefan Roese <sr@denx.de>

---

v2 changes:
  - none
v3 changes:
  - use ARRAY_SIZE instead of #define size
v4 changes:
  - none
v5 changes:
  - use if(IS_ENABLED()) for inline check instead of ifdef

---
 cmd/mvebu/bubt.c | 47 +++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 45 insertions(+), 2 deletions(-)

diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c
index b80b81c82a..b03924ca06 100644
--- a/cmd/mvebu/bubt.c
+++ b/cmd/mvebu/bubt.c
@@ -107,6 +107,24 @@ struct a38x_main_hdr_v1 {
 	u8  ext;                   /* 0x1E      */
 	u8  checksum;              /* 0x1F      */
 };
+
+struct a38x_boot_mode {
+	unsigned int id;
+	const char *name;
+};
+
+/* The blockid header field values used to indicate boot device of image */
+struct a38x_boot_mode a38x_boot_modes[] = {
+	{ 0x4D, "i2c"  },
+	{ 0x5A, "spi"  },
+	{ 0x69, "uart" },
+	{ 0x78, "sata" },
+	{ 0x8B, "nand" },
+	{ 0x9C, "pex"  },
+	{ 0xAE, "mmc"  },
+	{},
+};
+
 #endif
 
 struct bubt_dev {
@@ -644,6 +662,23 @@ static int check_image_header(void)
 	return 0;
 }
 #elif defined(CONFIG_ARMADA_38X)
+static int a38x_check_boot_mode(const struct bubt_dev *dst)
+{
+	int mode;
+	const struct a38x_main_hdr_v1 *hdr =
+		(struct a38x_main_hdr_v1 *)get_load_addr();
+
+	for (mode = 0; mode < ARRAY_SIZE(a38x_boot_modes); mode++) {
+		if (strcmp(a38x_boot_modes[mode].name, dst->name) == 0)
+			break;
+	}
+
+	if (a38x_boot_modes[mode].id == hdr->blockid)
+		return 0;
+
+	return -ENOEXEC;
+}
+
 static size_t a38x_header_size(const struct a38x_main_hdr_v1 *h)
 {
 	if (h->version == 1)
@@ -697,7 +732,7 @@ static int check_image_header(void)
 }
 #endif
 
-static int bubt_verify(size_t image_size)
+static int bubt_verify(const struct bubt_dev *dst)
 {
 	int err;
 
@@ -708,6 +743,14 @@ static int bubt_verify(size_t image_size)
 		return err;
 	}
 
+	if (IS_ENABLED(CONFIG_ARMADA_38X)) {
+		err = a38x_check_boot_mode(dst);
+		if (err) {
+			puts("Error: image not built for destination device!\n");
+			return err;
+		}
+	}
+
 	return 0;
 }
 
@@ -829,7 +872,7 @@ int do_bubt_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	if (!image_size)
 		return -EIO;
 
-	err = bubt_verify(image_size);
+	err = bubt_verify(dst);
 	if (err)
 		return err;
 
-- 
2.25.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v5 4/5] arm: mvebu: clearfog: enable bubt command
  2020-03-24 14:23 [PATCH v5 1/5] cmd: mvebu: bubt: add A38x support Joel Johnson
  2020-03-24 14:23 ` [PATCH v5 2/5] cmd: mvebu: bubt: correct U-Boot spelling Joel Johnson
  2020-03-24 14:23 ` [PATCH v5 3/5] cmd: mvebu: bubt: verify A38x target device type Joel Johnson
@ 2020-03-24 14:23 ` Joel Johnson
  2020-03-24 14:23 ` [PATCH v5 5/5] cmd: mvebu: bubt: show image boot device Joel Johnson
  3 siblings, 0 replies; 6+ messages in thread
From: Joel Johnson @ 2020-03-24 14:23 UTC (permalink / raw)
  To: u-boot

With support added for Armada 38x, include the bubt command in
ClearFog defconfig.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Stefan Roese <sr@denx.de>

---

v2 changes:
  - none
v3 changes:
  - none
v4 changes:
  - none
v5 changes:
  - none

---
 configs/clearfog_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/configs/clearfog_defconfig b/configs/clearfog_defconfig
index c938448c30..0d7e19e731 100644
--- a/configs/clearfog_defconfig
+++ b/configs/clearfog_defconfig
@@ -35,6 +35,7 @@ CONFIG_SPL_CMD_TLV_EEPROM=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_MVEBU_BUBT=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
-- 
2.25.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v5 5/5] cmd: mvebu: bubt: show image boot device
  2020-03-24 14:23 [PATCH v5 1/5] cmd: mvebu: bubt: add A38x support Joel Johnson
                   ` (2 preceding siblings ...)
  2020-03-24 14:23 ` [PATCH v5 4/5] arm: mvebu: clearfog: enable bubt command Joel Johnson
@ 2020-03-24 14:23 ` Joel Johnson
  3 siblings, 0 replies; 6+ messages in thread
From: Joel Johnson @ 2020-03-24 14:23 UTC (permalink / raw)
  To: u-boot

When a mismatch is found trying to write an image for one boot method
to a different boot device, print an error message including the image
header marked target boot device type.

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
Reviewed-by: Stefan Roese <sr@denx.de>

---

v2 changes:
  - newly added in v2 series
v3 changes:
  - none
v4 changes:
  - adjust to ARRAY_SIZE usage
v5 changes:
  - remove double space (one each line) in error message

---
 cmd/mvebu/bubt.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c
index b03924ca06..728633e60a 100644
--- a/cmd/mvebu/bubt.c
+++ b/cmd/mvebu/bubt.c
@@ -676,6 +676,17 @@ static int a38x_check_boot_mode(const struct bubt_dev *dst)
 	if (a38x_boot_modes[mode].id == hdr->blockid)
 		return 0;
 
+	for (int i = 0; i < ARRAY_SIZE(a38x_boot_modes); i++) {
+		if (a38x_boot_modes[i].id == hdr->blockid) {
+			printf("Error: image meant to be booted from"
+			       " \"%s\", not \"%s\"!\n",
+			       a38x_boot_modes[i].name, dst->name);
+			return -ENOEXEC;
+		}
+	}
+
+	printf("Error: unknown boot device in image header: 0x%x\n",
+	       hdr->blockid);
 	return -ENOEXEC;
 }
 
@@ -746,7 +757,6 @@ static int bubt_verify(const struct bubt_dev *dst)
 	if (IS_ENABLED(CONFIG_ARMADA_38X)) {
 		err = a38x_check_boot_mode(dst);
 		if (err) {
-			puts("Error: image not built for destination device!\n");
 			return err;
 		}
 	}
-- 
2.25.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH v5 3/5] cmd: mvebu: bubt: verify A38x target device type
  2020-03-24 14:23 ` [PATCH v5 3/5] cmd: mvebu: bubt: verify A38x target device type Joel Johnson
@ 2020-04-14  8:40   ` Stefan Roese
  0 siblings, 0 replies; 6+ messages in thread
From: Stefan Roese @ 2020-04-14  8:40 UTC (permalink / raw)
  To: u-boot

Hi Joel,

On 24.03.20 15:23, Joel Johnson wrote:
> Ensure that the device to which an image is being written includes
> header information indicating boot support for the destination
> device.
> 
> This is derived from the support in the SolidRun master-a38x vendor
> fork.
> 
> Signed-off-by: Joel Johnson <mrjoel@lixil.net>
> Reviewed-by: Stefan Roese <sr@denx.de>
> 
> ---
> 
> v2 changes:
>    - none
> v3 changes:
>    - use ARRAY_SIZE instead of #define size
> v4 changes:
>    - none
> v5 changes:
>    - use if(IS_ENABLED()) for inline check instead of ifdef
> 
> ---
>   cmd/mvebu/bubt.c | 47 +++++++++++++++++++++++++++++++++++++++++++++--
>   1 file changed, 45 insertions(+), 2 deletions(-)
> 
> diff --git a/cmd/mvebu/bubt.c b/cmd/mvebu/bubt.c
> index b80b81c82a..b03924ca06 100644
> --- a/cmd/mvebu/bubt.c
> +++ b/cmd/mvebu/bubt.c
> @@ -107,6 +107,24 @@ struct a38x_main_hdr_v1 {
>   	u8  ext;                   /* 0x1E      */
>   	u8  checksum;              /* 0x1F      */
>   };
> +
> +struct a38x_boot_mode {
> +	unsigned int id;
> +	const char *name;
> +};
> +
> +/* The blockid header field values used to indicate boot device of image */
> +struct a38x_boot_mode a38x_boot_modes[] = {
> +	{ 0x4D, "i2c"  },
> +	{ 0x5A, "spi"  },
> +	{ 0x69, "uart" },
> +	{ 0x78, "sata" },
> +	{ 0x8B, "nand" },
> +	{ 0x9C, "pex"  },
> +	{ 0xAE, "mmc"  },
> +	{},
> +};
> +
>   #endif
>   
>   struct bubt_dev {
> @@ -644,6 +662,23 @@ static int check_image_header(void)
>   	return 0;
>   }
>   #elif defined(CONFIG_ARMADA_38X)
> +static int a38x_check_boot_mode(const struct bubt_dev *dst)
> +{
> +	int mode;
> +	const struct a38x_main_hdr_v1 *hdr =
> +		(struct a38x_main_hdr_v1 *)get_load_addr();
> +
> +	for (mode = 0; mode < ARRAY_SIZE(a38x_boot_modes); mode++) {
> +		if (strcmp(a38x_boot_modes[mode].name, dst->name) == 0)
> +			break;
> +	}
> +
> +	if (a38x_boot_modes[mode].id == hdr->blockid)
> +		return 0;
> +
> +	return -ENOEXEC;
> +}
> +
>   static size_t a38x_header_size(const struct a38x_main_hdr_v1 *h)
>   {
>   	if (h->version == 1)
> @@ -697,7 +732,7 @@ static int check_image_header(void)
>   }
>   #endif
>   
> -static int bubt_verify(size_t image_size)
> +static int bubt_verify(const struct bubt_dev *dst)
>   {
>   	int err;
>   
> @@ -708,6 +743,14 @@ static int bubt_verify(size_t image_size)
>   		return err;
>   	}
>   
> +	if (IS_ENABLED(CONFIG_ARMADA_38X)) {
> +		err = a38x_check_boot_mode(dst);

Unfortunately this does not work. I'm getting this warning when
compiling for A37xx boards:

cmd/mvebu/bubt.c: In function ?bubt_verify?:
cmd/mvebu/bubt.c:758:9: warning: implicit declaration of function 
?a38x_check_boot_mode? [-Wimplicit-function-declaration]
    err = a38x_check_boot_mode(dst);
          ^~~~~~~~~~~~~~~~~~~~

So we can't use #ifdef in the function desclaration and IS_ENABLED()
in the "if" line above.

It seems that we need to switch back to the #ifdef in the function
description again. Or unconditianally compile a38x_check_boot_mode().
This might be even better. Please give it a try.

Thanks,
Stefan

> +		if (err) {
> +			puts("Error: image not built for destination device!\n");
> +			return err;
> +		}
> +	}
> +
>   	return 0;
>   }
>   
> @@ -829,7 +872,7 @@ int do_bubt_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
>   	if (!image_size)
>   		return -EIO;
>   
> -	err = bubt_verify(image_size);
> +	err = bubt_verify(dst);
>   	if (err)
>   		return err;
>   
> 


Viele Gr??e,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2020-04-14  8:40 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-24 14:23 [PATCH v5 1/5] cmd: mvebu: bubt: add A38x support Joel Johnson
2020-03-24 14:23 ` [PATCH v5 2/5] cmd: mvebu: bubt: correct U-Boot spelling Joel Johnson
2020-03-24 14:23 ` [PATCH v5 3/5] cmd: mvebu: bubt: verify A38x target device type Joel Johnson
2020-04-14  8:40   ` Stefan Roese
2020-03-24 14:23 ` [PATCH v5 4/5] arm: mvebu: clearfog: enable bubt command Joel Johnson
2020-03-24 14:23 ` [PATCH v5 5/5] cmd: mvebu: bubt: show image boot device Joel Johnson

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.