* [PATCH 0/3] regulator: max77826: Add MAX77826 support @ 2020-04-13 16:44 Iskren Chernev 2020-04-13 16:44 ` [PATCH 1/3] regulator: max77826: Add max77826 regulator driver Iskren Chernev ` (3 more replies) 0 siblings, 4 replies; 11+ messages in thread From: Iskren Chernev @ 2020-04-13 16:44 UTC (permalink / raw) To: linux-arm-msm Cc: Andy Gross, Bjorn Andersson, devicetree, Liam Girdwood, linux-kernel, Mark Brown, Rob Herring, ~postmarketos/upstreaming, Iskren Chernev The MAX77826 is a PMIC found on the Samsung Galaxy S5 (klte) and possibly other devices. It is produced by Maxim Integrated and contains 15 LDOs a buck and a buck boost regulator. Iskren Chernev (3): regulator: max77826: Add max77826 regulator driver dt-bindings: regulator: Add document bindings for max77826 ARM: dts: qcom: msm8974-klte: Add max77826 pmic node .../bindings/regulator/maxim,max77826.yaml | 70 ++++ .../boot/dts/qcom-msm8974-samsung-klte.dts | 110 +++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 11 + drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/max77826-regulator.c | 301 ++++++++++++++++++ 6 files changed, 503 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77826.yaml create mode 100644 drivers/regulator/max77826-regulator.c base-commit: 3b2804993d1e9f2b01f4264993009d3e48722e0d -- 2.26.0 ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 1/3] regulator: max77826: Add max77826 regulator driver 2020-04-13 16:44 [PATCH 0/3] regulator: max77826: Add MAX77826 support Iskren Chernev @ 2020-04-13 16:44 ` Iskren Chernev 2020-04-14 10:56 ` Mark Brown 2020-04-13 16:44 ` [PATCH 2/3] dt-bindings: regulator: Add document bindings for max77826 Iskren Chernev ` (2 subsequent siblings) 3 siblings, 1 reply; 11+ messages in thread From: Iskren Chernev @ 2020-04-13 16:44 UTC (permalink / raw) To: linux-arm-msm Cc: Andy Gross, Bjorn Andersson, devicetree, Liam Girdwood, linux-kernel, Mark Brown, Rob Herring, ~postmarketos/upstreaming, Iskren Chernev Adding regulator driver for the Maxim max77826 device. The max77826 PMIC contains a high-efficiency BUCK regulator, a BUCK BOOST regulator and 15 LDOs. It is designed for smartphone and tablet applications and is accessed over I2C. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> --- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/max77826-regulator.c | 301 +++++++++++++++++++++++++ 3 files changed, 312 insertions(+) create mode 100644 drivers/regulator/max77826-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index f4b72cb098ef..e8f7a0965ae9 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -585,6 +585,16 @@ config REGULATOR_MAX77802 Exynos5420/Exynos5800 SoCs to control various voltages. It includes support for control of voltage and ramp speed. +config REGULATOR_MAX77826 + tristate "Maxim 77826 regulator" + depends on I2C + select REGMAP_I2C + help + This driver controls a Maxim 77826 regulator via I2C bus. + The regulator include 15 LDOs, BUCK and BUCK BOOST regulator. + It includes support for control of output voltage. This + regulator is found on the Samsung Galaxy S5 (klte) smartphone. + config REGULATOR_MC13XXX_CORE tristate diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 6610ee001d9a..e8f163371071 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -74,6 +74,7 @@ obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o obj-$(CONFIG_REGULATOR_MAX77686) += max77686-regulator.o obj-$(CONFIG_REGULATOR_MAX77693) += max77693-regulator.o obj-$(CONFIG_REGULATOR_MAX77802) += max77802-regulator.o +obj-$(CONFIG_REGULATOR_MAX77826) += max77826-regulator.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o diff --git a/drivers/regulator/max77826-regulator.c b/drivers/regulator/max77826-regulator.c new file mode 100644 index 000000000000..070fbc2e1e43 --- /dev/null +++ b/drivers/regulator/max77826-regulator.c @@ -0,0 +1,301 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// +// max77826-regulator.c - regulator driver for Maxim MAX77826 +// +// Author: Iskren Chernev <iskren.chernev@gmail.com> + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> +#include <linux/i2c.h> +#include <linux/regmap.h> + +enum max77826_registers { + MAX77826_REG_INT_SRC = 0x00, + MAX77826_REG_SYS_INT, + MAX77826_REG_INT1, + MAX77826_REG_INT2, + MAX77826_REG_BB_INT, + MAX77826_REG_INT_SRC_M, + MAX77826_REG_TOPSYS_INT_M, + MAX77826_REG_INT1_M, + MAX77826_REG_INT2_M, + MAX77826_REG_BB_INT_M, + MAX77826_REG_TOPSYS_STAT, + MAX77826_REG_STAT1, + MAX77826_REG_STAT2, + MAX77826_REG_BB_STAT, + /* 0x0E - 0x0F: Reserved */ + MAX77826_REG_LDO_OPMD1 = 0x10, + MAX77826_REG_LDO_OPMD2, + MAX77826_REG_LDO_OPMD3, + MAX77826_REG_LDO_OPMD4, + MAX77826_REG_B_BB_OPMD, + /* 0x15 - 0x1F: Reserved */ + MAX77826_REG_LDO1_CFG = 0x20, + MAX77826_REG_LDO2_CFG, + MAX77826_REG_LDO3_CFG, + MAX77826_REG_LDO4_CFG, + MAX77826_REG_LDO5_CFG, + MAX77826_REG_LDO6_CFG, + MAX77826_REG_LDO7_CFG, + MAX77826_REG_LDO8_CFG, + MAX77826_REG_LDO9_CFG, + MAX77826_REG_LDO10_CFG, + MAX77826_REG_LDO11_CFG, + MAX77826_REG_LDO12_CFG, + MAX77826_REG_LDO13_CFG, + MAX77826_REG_LDO14_CFG, + MAX77826_REG_LDO15_CFG, + /* 0x2F: Reserved */ + MAX77826_REG_BUCK_CFG = 0x30, + MAX77826_REG_BUCK_VOUT, + MAX77826_REG_BB_CFG, + MAX77826_REG_BB_VOUT, + /* 0x34 - 0x3F: Reserved */ + MAX77826_REG_BUCK_SS_FREQ = 0x40, + MAX77826_REG_UVLO_FALL, + /* 0x42 - 0xCE: Reserved */ + MAX77826_REG_DEVICE_ID = 0xCF, +}; + +enum max77826_regulators { + MAX77826_LDO1 = 0, + MAX77826_LDO2, + MAX77826_LDO3, + MAX77826_LDO4, + MAX77826_LDO5, + MAX77826_LDO6, + MAX77826_LDO7, + MAX77826_LDO8, + MAX77826_LDO9, + MAX77826_LDO10, + MAX77826_LDO11, + MAX77826_LDO12, + MAX77826_LDO13, + MAX77826_LDO14, + MAX77826_LDO15, + MAX77826_BUCK, + MAX77826_BUCKBOOST, + MAX77826_MAX_REGULATORS, +}; + +#define MAX77826_MASK_LDO 0x7f +#define MAX77826_MASK_BUCK 0xff +#define MAX77826_MASK_BUCKBOOST 0x7f +#define MAX77826_BUCK_RAMP_DELAY 12500 + +/* values in mV */ +/* for LDO1-3 */ +#define MAX77826_NMOS_LDO_VOLT_MIN 600000 +#define MAX77826_NMOS_LDO_VOLT_MAX 2187500 +#define MAX77826_NMOS_LDO_VOLT_STEP 12500 + +/* for LDO4-15 */ +#define MAX77826_PMOS_LDO_VOLT_MIN 800000 +#define MAX77826_PMOS_LDO_VOLT_MAX 3975000 +#define MAX77826_PMOS_LDO_VOLT_STEP 25000 + +/* for BUCK */ +#define MAX77826_BUCK_VOLT_MIN 500000 +#define MAX77826_BUCK_VOLT_MAX 1800000 +#define MAX77826_BUCK_VOLT_STEP 6250 + +/* for BUCKBOOST */ +#define MAX77826_BUCKBOOST_VOLT_MIN 2600000 +#define MAX77826_BUCKBOOST_VOLT_MAX 4187500 +#define MAX77826_BUCKBOOST_VOLT_STEP 12500 +#define MAX77826_VOLT_RANGE(_type) \ + ((MAX77826_ ## _type ## _VOLT_MAX - \ + MAX77826_ ## _type ## _VOLT_MIN) / \ + MAX77826_ ## _type ## _VOLT_STEP + 1) + +#define MAX77826_LDO(_id, _type) \ + [MAX77826_LDO ## _id] = { \ + .id = MAX77826_LDO ## _id, \ + .name = "LDO"#_id, \ + .of_match = of_match_ptr("LDO"#_id), \ + .regulators_node = "regulators", \ + .ops = &max77826_most_ops, \ + .min_uV = MAX77826_ ## _type ## _LDO_VOLT_MIN, \ + .uV_step = MAX77826_ ## _type ## _LDO_VOLT_STEP, \ + .n_voltages = MAX77826_VOLT_RANGE(_type ## _LDO), \ + .enable_reg = MAX77826_REG_LDO_OPMD1 + (_id - 1) / 4, \ + .enable_mask = BIT(((_id - 1) % 4) * 2 + 1), \ + .vsel_reg = MAX77826_REG_LDO1_CFG + (_id - 1), \ + .vsel_mask = MAX77826_MASK_LDO, \ + .owner = THIS_MODULE, \ + } + +#define MAX77826_BUCK(_idx, _id, _ops) \ + [MAX77826_ ## _id] = { \ + .id = MAX77826_ ## _id, \ + .name = #_id, \ + .of_match = of_match_ptr(#_id), \ + .regulators_node = "regulators", \ + .ops = &_ops, \ + .min_uV = MAX77826_ ## _id ## _VOLT_MIN, \ + .uV_step = MAX77826_ ## _id ## _VOLT_STEP, \ + .n_voltages = MAX77826_VOLT_RANGE(_id), \ + .enable_reg = MAX77826_REG_B_BB_OPMD, \ + .enable_mask = BIT(_idx * 2 + 1), \ + .vsel_reg = MAX77826_REG_BUCK_VOUT + _idx * 2, \ + .vsel_mask = MAX77826_MASK_ ## _id, \ + .owner = THIS_MODULE, \ + } + + + +struct max77826_regulator_info { + struct regmap *regmap; + struct regulator_desc *rdesc; +}; + +static const struct regmap_config max77826_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX77826_REG_DEVICE_ID, +}; + +static int max77826_set_voltage_time_sel(struct regulator_dev *, + unsigned int old_selector, + unsigned int new_selector); + +static const struct regulator_ops max77826_most_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, +}; + +static const struct regulator_ops max77826_buck_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = max77826_set_voltage_time_sel, +}; + +static struct regulator_desc max77826_regulators_desc[] = { + MAX77826_LDO(1, NMOS), + MAX77826_LDO(2, NMOS), + MAX77826_LDO(3, NMOS), + MAX77826_LDO(4, PMOS), + MAX77826_LDO(5, PMOS), + MAX77826_LDO(6, PMOS), + MAX77826_LDO(7, PMOS), + MAX77826_LDO(8, PMOS), + MAX77826_LDO(9, PMOS), + MAX77826_LDO(10, PMOS), + MAX77826_LDO(11, PMOS), + MAX77826_LDO(12, PMOS), + MAX77826_LDO(13, PMOS), + MAX77826_LDO(14, PMOS), + MAX77826_LDO(15, PMOS), + MAX77826_BUCK(0, BUCK, max77826_buck_ops), + MAX77826_BUCK(1, BUCKBOOST, max77826_most_ops), +}; + +static int max77826_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, + unsigned int new_selector) +{ + if (new_selector > old_selector) { + return DIV_ROUND_UP(MAX77826_BUCK_VOLT_STEP * + (new_selector - old_selector), + MAX77826_BUCK_RAMP_DELAY); + } + + return 0; +} + +static int max77826_read_device_id(struct regmap *regmap, struct device *dev) +{ + unsigned int device_id; + int res; + + res = regmap_read(regmap, MAX77826_REG_DEVICE_ID, &device_id); + if (!res) + dev_dbg(dev, "DEVICE_ID: 0x%x\n", device_id); + + return res; +} + +static int max77826_i2c_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct max77826_regulator_info *info; + struct regulator_config config = {}; + struct regulator_dev *rdev; + struct regmap *regmap; + int i; + + info = devm_kzalloc(dev, sizeof(struct max77826_regulator_info), + GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->rdesc = max77826_regulators_desc; + regmap = devm_regmap_init_i2c(client, &max77826_regmap_config); + if (IS_ERR(regmap)) { + dev_err(dev, "Failed to allocate regmap!\n"); + return PTR_ERR(regmap); + } + + info->regmap = regmap; + i2c_set_clientdata(client, info); + + config.dev = dev; + config.regmap = regmap; + config.driver_data = info; + + for (i = 0; i < MAX77826_MAX_REGULATORS; i++) { + rdev = devm_regulator_register(dev, + &max77826_regulators_desc[i], + &config); + if (IS_ERR(rdev)) { + dev_err(dev, "Failed to register regulator!\n"); + return PTR_ERR(rdev); + } + } + + return max77826_read_device_id(regmap, dev); +} + +static const struct of_device_id max77826_of_match[] = { + { .compatible = "maxim,max77826-regulator" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, max77826_of_match); + +static const struct i2c_device_id max77826_id[] = { + { "max77826-regulator" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(i2c, max77826_id); + +static struct i2c_driver max77826_regulator_driver = { + .driver = { + .name = "max77826", + .of_match_table = of_match_ptr(max77826_of_match), + }, + .probe_new = max77826_i2c_probe, + .id_table = max77826_id, +}; +module_i2c_driver(max77826_regulator_driver); + +MODULE_AUTHOR("Iskren Chernev <iskren.chernev@gmail.com>"); +MODULE_DESCRIPTION("MAX77826 PMIC regulator driver"); +MODULE_LICENSE("GPL"); -- 2.26.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 1/3] regulator: max77826: Add max77826 regulator driver 2020-04-13 16:44 ` [PATCH 1/3] regulator: max77826: Add max77826 regulator driver Iskren Chernev @ 2020-04-14 10:56 ` Mark Brown 0 siblings, 0 replies; 11+ messages in thread From: Mark Brown @ 2020-04-14 10:56 UTC (permalink / raw) To: Iskren Chernev Cc: linux-arm-msm, Andy Gross, Bjorn Andersson, devicetree, Liam Girdwood, linux-kernel, Rob Herring, ~postmarketos/upstreaming [-- Attachment #1: Type: text/plain, Size: 294 bytes --] On Mon, Apr 13, 2020 at 07:44:38PM +0300, Iskren Chernev wrote: > +static const struct of_device_id max77826_of_match[] = { > + { .compatible = "maxim,max77826-regulator" }, This should just be maxim,max77826 - there's no need to disambiguate or describe the device in the compatible string. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 2/3] dt-bindings: regulator: Add document bindings for max77826 2020-04-13 16:44 [PATCH 0/3] regulator: max77826: Add MAX77826 support Iskren Chernev 2020-04-13 16:44 ` [PATCH 1/3] regulator: max77826: Add max77826 regulator driver Iskren Chernev @ 2020-04-13 16:44 ` Iskren Chernev 2020-04-20 20:55 ` Rob Herring 2020-04-13 16:44 ` [PATCH 3/3] ARM: dts: qcom: msm8974-klte: Add max77826 pmic node Iskren Chernev 2020-04-14 10:57 ` [PATCH 0/3] regulator: max77826: Add MAX77826 support Mark Brown 3 siblings, 1 reply; 11+ messages in thread From: Iskren Chernev @ 2020-04-13 16:44 UTC (permalink / raw) To: linux-arm-msm Cc: Andy Gross, Bjorn Andersson, devicetree, Liam Girdwood, linux-kernel, Mark Brown, Rob Herring, ~postmarketos/upstreaming, Iskren Chernev Add device tree binding information for max77826 regulator driver. Example bindings for max77826 are added. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> --- .../bindings/regulator/maxim,max77826.yaml | 70 +++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77826.yaml diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml new file mode 100644 index 000000000000..3cd449a746b0 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX77826 PMIC + +maintainers: + - Iskren Chernev <iskren.chernev@gmail.com> + +properties: + $nodename: + pattern: "pmic@[0-9a-f]{1,2}" + compatible: + enum: + - maxim,max77826-regulator + + reg: + maxItems: 1 + + regulators: + type: object + allOf: + - $ref: regulator.yaml# + description: | + list of regulators provided by this controller, must be named + after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST + + patternProperties: + "^LDO([1-9]|1[0-5])$": + type: object + allOf: + - $ref: regulator.yaml# + + "^BUCK|BUCKBOOST$": + type: object + allOf: + - $ref: regulator.yaml# + + additionalProperties: false + additionalProperties: false + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "maxim,max77826-regulator"; + reg = <0x69>; + + regulators { + LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <3587500>; + }; + }; + }; + }; +... -- 2.26.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] dt-bindings: regulator: Add document bindings for max77826 2020-04-13 16:44 ` [PATCH 2/3] dt-bindings: regulator: Add document bindings for max77826 Iskren Chernev @ 2020-04-20 20:55 ` Rob Herring 2020-04-23 12:59 ` Iskren Chernev 0 siblings, 1 reply; 11+ messages in thread From: Rob Herring @ 2020-04-20 20:55 UTC (permalink / raw) To: Iskren Chernev Cc: linux-arm-msm, Andy Gross, Bjorn Andersson, devicetree, Liam Girdwood, linux-kernel, Mark Brown, ~postmarketos/upstreaming On Mon, Apr 13, 2020 at 07:44:39PM +0300, Iskren Chernev wrote: > Add device tree binding information for max77826 regulator driver. > Example bindings for max77826 are added. > > Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> > --- > .../bindings/regulator/maxim,max77826.yaml | 70 +++++++++++++++++++ > 1 file changed, 70 insertions(+) > create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77826.yaml > > diff --git a/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml > new file mode 100644 > index 000000000000..3cd449a746b0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/maxim,max77826.yaml > @@ -0,0 +1,70 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/regulator/maxim,max77826.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Maxim Integrated MAX77826 PMIC > + > +maintainers: > + - Iskren Chernev <iskren.chernev@gmail.com> > + > +properties: > + $nodename: > + pattern: "pmic@[0-9a-f]{1,2}" > + compatible: > + enum: > + - maxim,max77826-regulator > + > + reg: > + maxItems: 1 > + > + regulators: > + type: object > + allOf: > + - $ref: regulator.yaml# > + description: | > + list of regulators provided by this controller, must be named > + after their hardware counterparts LDO[1-15], BUCK and BUCKBOOST > + > + patternProperties: > + "^LDO([1-9]|1[0-5])$": > + type: object > + allOf: > + - $ref: regulator.yaml# > + > + "^BUCK|BUCKBOOST$": > + type: object > + allOf: > + - $ref: regulator.yaml# > + > + additionalProperties: false You are defining a property called 'additionalProperties'. This one should be dropped because additionalProperties doesn't work with a $ref. > + additionalProperties: false > + > +required: > + - compatible > + - reg > + - regulators > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pmic@69 { > + compatible = "maxim,max77826-regulator"; > + reg = <0x69>; > + > + regulators { > + LDO2 { > + regulator-name = "ldo2"; > + regulator-min-microvolt = <650000>; > + regulator-max-microvolt = <3587500>; > + }; > + }; > + }; > + }; > +... > -- > 2.26.0 > ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] dt-bindings: regulator: Add document bindings for max77826 2020-04-20 20:55 ` Rob Herring @ 2020-04-23 12:59 ` Iskren Chernev 2020-04-24 14:28 ` Rob Herring 0 siblings, 1 reply; 11+ messages in thread From: Iskren Chernev @ 2020-04-23 12:59 UTC (permalink / raw) To: Rob Herring Cc: linux-arm-msm, Andy Gross, Bjorn Andersson, devicetree, Liam Girdwood, linux-kernel, Mark Brown, ~postmarketos/upstreaming On 4/20/20 11:55 PM, Rob Herring wrote: > On Mon, Apr 13, 2020 at 07:44:39PM +0300, Iskren Chernev wrote: >> + patternProperties: >> + "^LDO([1-9]|1[0-5])$": >> + type: object >> + allOf: >> + - $ref: regulator.yaml# >> + >> + "^BUCK|BUCKBOOST$": >> + type: object >> + allOf: >> + - $ref: regulator.yaml# >> + >> + additionalProperties: false > > You are defining a property called 'additionalProperties'. This one > should be dropped because additionalProperties doesn't work with a $ref. > I got the idea from mps,mpq7920.yaml. It has additionalProperties in the exact same places that I do. Also bd718(28|37|47).yaml seem to use additionalProperties inside patternProperties. Shall I modify it as well? I couldn't find the core schema for this yaml: http://devicetree.org/meta-schemas/core.yaml (gives 404). Is there a way to verify the validity of the yaml? Also, this patch is already merged in linux-next. I guess I shall submit a new patch with the fixes standalone? ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 2/3] dt-bindings: regulator: Add document bindings for max77826 2020-04-23 12:59 ` Iskren Chernev @ 2020-04-24 14:28 ` Rob Herring 0 siblings, 0 replies; 11+ messages in thread From: Rob Herring @ 2020-04-24 14:28 UTC (permalink / raw) To: Iskren Chernev Cc: linux-arm-msm, Andy Gross, Bjorn Andersson, devicetree, Liam Girdwood, linux-kernel, Mark Brown, ~postmarketos/upstreaming On Thu, Apr 23, 2020 at 7:59 AM Iskren Chernev <iskren.chernev@gmail.com> wrote: > > > On 4/20/20 11:55 PM, Rob Herring wrote: > > On Mon, Apr 13, 2020 at 07:44:39PM +0300, Iskren Chernev wrote: > >> + patternProperties: > >> + "^LDO([1-9]|1[0-5])$": > >> + type: object > >> + allOf: > >> + - $ref: regulator.yaml# > >> + > >> + "^BUCK|BUCKBOOST$": > >> + type: object > >> + allOf: > >> + - $ref: regulator.yaml# > >> + > >> + additionalProperties: false > > > > You are defining a property called 'additionalProperties'. This one > > should be dropped because additionalProperties doesn't work with a $ref. > > > > I got the idea from mps,mpq7920.yaml. It has additionalProperties in the > exact same places that I do. Also bd718(28|37|47).yaml seem to use > additionalProperties inside patternProperties. Shall I modify it as well? Indeed. mps,mp5416.yaml too. I'll fix all of these and few non-regulator ones so I can get them into rc3. > I couldn't find the core schema for this yaml: > http://devicetree.org/meta-schemas/core.yaml (gives 404). Is there a way > to verify the validity of the yaml? Running 'make dt_binding_check'. The url is just convention and while files could be there they aren't. They are all contained in the dtschema module[1]. However, in this case the meta-schema fails to check for this. It is technically valid as it is saying you can't have a DT property called 'additionalProperties'. I've written a check now which should disallow listing any DT property names which are json-schema vocabulary. Once the failures get fixed I'll add it to the meta-schema. > Also, this patch is already merged in linux-next. I guess I shall submit > a new patch with the fixes standalone? Yes, should be on top of this one. Thanks, Rob [1] https://github.com/devicetree-org/dt-schema ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH 3/3] ARM: dts: qcom: msm8974-klte: Add max77826 pmic node 2020-04-13 16:44 [PATCH 0/3] regulator: max77826: Add MAX77826 support Iskren Chernev 2020-04-13 16:44 ` [PATCH 1/3] regulator: max77826: Add max77826 regulator driver Iskren Chernev 2020-04-13 16:44 ` [PATCH 2/3] dt-bindings: regulator: Add document bindings for max77826 Iskren Chernev @ 2020-04-13 16:44 ` Iskren Chernev 2020-04-14 10:57 ` [PATCH 0/3] regulator: max77826: Add MAX77826 support Mark Brown 3 siblings, 0 replies; 11+ messages in thread From: Iskren Chernev @ 2020-04-13 16:44 UTC (permalink / raw) To: linux-arm-msm Cc: Andy Gross, Bjorn Andersson, devicetree, Liam Girdwood, linux-kernel, Mark Brown, Rob Herring, ~postmarketos/upstreaming, Iskren Chernev This introduces the MAX77826 PMIC that powers some pheripherals on the klte, like the touchpad, touchkeys and camera. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> --- .../boot/dts/qcom-msm8974-samsung-klte.dts | 110 ++++++++++++++++++ arch/arm/boot/dts/qcom-msm8974.dtsi | 11 ++ 2 files changed, 121 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts index eaa1001d0a46..f6d3a9dcf0de 100644 --- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts @@ -21,4 +21,114 @@ serial@f991e000 { status = "ok"; }; + pinctrl@fd510000 { + i2c6_pins: i2c6 { + mux { + pins = "gpio29", "gpio30"; + function = "blsp_i2c6"; + + drive-strength = <2>; + bias-disable; + }; + }; + }; + + i2c@f9928000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + + pmic@60 { + reg = <0x60>; + compatible = "maxim,max77826-regulator"; + + regulators { + max77826_ldo1: LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo2: LDO2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + max77826_ldo3: LDO3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + max77826_ldo4: LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo5: LDO5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo6: LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo7: LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo8: LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo9: LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_ldo10: LDO10 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo11: LDO11 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2950000>; + }; + + max77826_ldo12: LDO12 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo13: LDO13 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo14: LDO14 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max77826_ldo15: LDO15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + max77826_buck: BUCK { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + max77826_buckboost: BUCKBOOST { + regulator-min-microvolt = <3400000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 2ea2308d91b3..51f5f904f9eb 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -974,6 +974,17 @@ blsp_i2c3: i2c@f9925000 { #size-cells = <0>; }; + blsp_i2c6: i2c@f9928000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9928000 0x1000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp_i2c8: i2c@f9964000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; -- 2.26.0 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH 0/3] regulator: max77826: Add MAX77826 support 2020-04-13 16:44 [PATCH 0/3] regulator: max77826: Add MAX77826 support Iskren Chernev ` (2 preceding siblings ...) 2020-04-13 16:44 ` [PATCH 3/3] ARM: dts: qcom: msm8974-klte: Add max77826 pmic node Iskren Chernev @ 2020-04-14 10:57 ` Mark Brown 2020-04-14 13:14 ` Iskren Chernev 3 siblings, 1 reply; 11+ messages in thread From: Mark Brown @ 2020-04-14 10:57 UTC (permalink / raw) To: Iskren Chernev Cc: linux-arm-msm, Andy Gross, Bjorn Andersson, devicetree, Liam Girdwood, linux-kernel, Rob Herring, ~postmarketos/upstreaming [-- Attachment #1: Type: text/plain, Size: 508 bytes --] On Mon, Apr 13, 2020 at 07:44:37PM +0300, Iskren Chernev wrote: > The MAX77826 is a PMIC found on the Samsung Galaxy S5 (klte) and possibly other > devices. It is produced by Maxim Integrated and contains 15 LDOs a buck and > a buck boost regulator. > > Iskren Chernev (3): > regulator: max77826: Add max77826 regulator driver > dt-bindings: regulator: Add document bindings for max77826 Aside from the compatible string and the subject prefix on the DT binding patch this looks good to me. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 0/3] regulator: max77826: Add MAX77826 support 2020-04-14 10:57 ` [PATCH 0/3] regulator: max77826: Add MAX77826 support Mark Brown @ 2020-04-14 13:14 ` Iskren Chernev 2020-04-14 14:53 ` Mark Brown 0 siblings, 1 reply; 11+ messages in thread From: Iskren Chernev @ 2020-04-14 13:14 UTC (permalink / raw) To: Mark Brown Cc: linux-arm-msm, Andy Gross, Bjorn Andersson, devicetree, Liam Girdwood, linux-kernel, Rob Herring, ~postmarketos/upstreaming On 4/14/20 1:57 PM, Mark Brown wrote: > On Mon, Apr 13, 2020 at 07:44:37PM +0300, Iskren Chernev wrote: >> The MAX77826 is a PMIC found on the Samsung Galaxy S5 (klte) and possibly other >> devices. It is produced by Maxim Integrated and contains 15 LDOs a buck and >> a buck boost regulator. >> >> Iskren Chernev (3): >> regulator: max77826: Add max77826 regulator driver >> dt-bindings: regulator: Add document bindings for max77826 > > Aside from the compatible string and the subject prefix on the DT > binding patch this looks good to me. About the subject -- I guess you mean the suffix is wrong, it should be: dt-bindings: regulator: Document bindings for max77826 I'll also change the compatible string. ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 0/3] regulator: max77826: Add MAX77826 support 2020-04-14 13:14 ` Iskren Chernev @ 2020-04-14 14:53 ` Mark Brown 0 siblings, 0 replies; 11+ messages in thread From: Mark Brown @ 2020-04-14 14:53 UTC (permalink / raw) To: Iskren Chernev Cc: linux-arm-msm, Andy Gross, Bjorn Andersson, devicetree, Liam Girdwood, linux-kernel, Rob Herring, ~postmarketos/upstreaming [-- Attachment #1: Type: text/plain, Size: 357 bytes --] On Tue, Apr 14, 2020 at 04:14:01PM +0300, Iskren Chernev wrote: > > Aside from the compatible string and the subject prefix on the DT > > binding patch this looks good to me. > About the subject -- I guess you mean the suffix is wrong, it should be: > dt-bindings: regulator: Document bindings for max77826 No, it should just be regulator:. [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2020-04-24 14:28 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-04-13 16:44 [PATCH 0/3] regulator: max77826: Add MAX77826 support Iskren Chernev 2020-04-13 16:44 ` [PATCH 1/3] regulator: max77826: Add max77826 regulator driver Iskren Chernev 2020-04-14 10:56 ` Mark Brown 2020-04-13 16:44 ` [PATCH 2/3] dt-bindings: regulator: Add document bindings for max77826 Iskren Chernev 2020-04-20 20:55 ` Rob Herring 2020-04-23 12:59 ` Iskren Chernev 2020-04-24 14:28 ` Rob Herring 2020-04-13 16:44 ` [PATCH 3/3] ARM: dts: qcom: msm8974-klte: Add max77826 pmic node Iskren Chernev 2020-04-14 10:57 ` [PATCH 0/3] regulator: max77826: Add MAX77826 support Mark Brown 2020-04-14 13:14 ` Iskren Chernev 2020-04-14 14:53 ` Mark Brown
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.