All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
To: linux-pm@vger.kernel.org
Cc: Zhang Rui <rui.zhang@intel.com>,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>,
	Len Brown <lenb@kernel.org>, Jiri Pirko <jiri@mellanox.com>,
	Ido Schimmel <idosch@mellanox.com>,
	"David S . Miller" <davem@davemloft.net>,
	Peter Kaestle <peter@piie.net>,
	Darren Hart <dvhart@infradead.org>,
	Andy Shevchenko <andy@infradead.org>,
	Support Opensource <support.opensource@diasemi.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amit.kucheria@verdurent.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Heiko Stuebner <heiko@sntech.de>,
	Orson Zhai <orsonzhai@gmail.com>,
	Baolin Wang <baolin.wang7@gmail.com>,
	Chunyan Zhang <zhang.lyra@gmail.com>,
	linux-acpi@vger.kernel.org, netdev@vger.kernel.org,
	platform-driver-x86@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, kernel@collabora.com,
	Andrzej Pietrasiewicz <andrzej.p@collabora.com>,
	Barlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: [PATCH 0/2] Stop monitoring disabled devices
Date: Mon, 20 Apr 2020 20:17:39 +0200	[thread overview]
Message-ID: <20200420181741.13167-1-andrzej.p@collabora.com> (raw)
In-Reply-To: <d7efa7dd-6a07-beff-e3d1-8797dd203105@samsung.com>

After 3 revisions of an RFC I'm sending this as a PATCH series.

The first patch makes all the drivers store their mode in struct
thermal_zone_device. Such a move has consequences: driver-specific
variables for storing mode are not necessary. Consequently get_mode()
methods become obsolete. Then sysfs "mode" attribute stops depending
on get_mode() being provided, because it is always provided from now on.

The first patch also introduces the initial mode to be optionally passed
to thermal_zone_device_register().

Given all the groundwork done in patch 1/2 patch 2/2 becomes very simple.

Compared to RFC v3 this series addresses comments from Bartlomiej,
thank you Bartlomiej for your review!

RFCv3..this PATCH:

- export thermal_zone_device_{enable|disable}() for drivers
- don't check provided enum values in acpi's thermal_zet_mode()
and in int3400_thermal_set_mode()
- use thermal_zone_device_enable() in of_thermal instead of open coding it
- use thermal_zone_device_{enable|disable}() in hisi_thermal, rockchip_thermal
and sprd_thermal
- assume THERMAL_DEVICE_ENABLED is thermal_zone_params not provided at
tzd's register time
- eliminated tzp-s which contain only .initial_mode = THERMAL_DEVICE_ENABLED,
- don't set tz->need_update and don't call thermal_zone_device_update()
at the end of thermal_zone_device_register()
- used .initial_mode in int340x_thermal_zone, x86_pkg_temp_thermal and
int3400_thermal

Andrzej Pietrasiewicz (2):
  thermal: core: Let thermal zone device's mode be stored in its struct
  thermal: core: Stop polling DISABLED thermal devices

 drivers/acpi/thermal.c                        | 35 ++--------
 .../ethernet/mellanox/mlxsw/core_thermal.c    | 42 ------------
 drivers/platform/x86/acerhdf.c                | 17 +----
 drivers/thermal/da9062-thermal.c              | 11 ----
 drivers/thermal/hisi_thermal.c                |  6 +-
 drivers/thermal/imx_thermal.c                 | 24 ++-----
 .../intel/int340x_thermal/int3400_thermal.c   | 31 ++-------
 .../int340x_thermal/int340x_thermal_zone.c    |  1 +
 .../thermal/intel/intel_quark_dts_thermal.c   | 22 ++-----
 drivers/thermal/intel/x86_pkg_temp_thermal.c  |  1 +
 drivers/thermal/of-thermal.c                  | 24 +------
 drivers/thermal/rockchip_thermal.c            |  6 +-
 drivers/thermal/sprd_thermal.c                |  6 +-
 drivers/thermal/thermal_core.c                | 65 ++++++++++++++++---
 drivers/thermal/thermal_core.h                |  3 +
 drivers/thermal/thermal_sysfs.c               | 29 +--------
 include/linux/thermal.h                       | 22 ++++++-
 17 files changed, 121 insertions(+), 224 deletions(-)


base-commit: 79799562bf087b30d9dd0fddf5bed2d3b038be08
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
To: linux-pm@vger.kernel.org
Cc: Zhang Rui <rui.zhang@intel.com>,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>,
	Len Brown <lenb@kernel.org>, Jiri Pirko <jiri@mellanox.com>,
	Ido Schimmel <idosch@mellanox.com>,
	"David S . Miller" <davem@davemloft.net>,
	Peter Kaestle <peter@piie.net>,
	Darren Hart <dvhart@infradead.org>,
	Andy Shevchenko <andy@infradead.org>,
	Support Opensource <support.opensource@diasemi.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amit.kucheria@verdurent.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Heiko Stuebner <heiko@sntech.de>,
	Orson Zhai <orsonzhai@gmail.com>, Baolin Wang <baolin.wang7@gma>
Subject: [PATCH 0/2] Stop monitoring disabled devices
Date: Mon, 20 Apr 2020 20:17:39 +0200	[thread overview]
Message-ID: <20200420181741.13167-1-andrzej.p@collabora.com> (raw)
In-Reply-To: <d7efa7dd-6a07-beff-e3d1-8797dd203105@samsung.com>

After 3 revisions of an RFC I'm sending this as a PATCH series.

The first patch makes all the drivers store their mode in struct
thermal_zone_device. Such a move has consequences: driver-specific
variables for storing mode are not necessary. Consequently get_mode()
methods become obsolete. Then sysfs "mode" attribute stops depending
on get_mode() being provided, because it is always provided from now on.

The first patch also introduces the initial mode to be optionally passed
to thermal_zone_device_register().

Given all the groundwork done in patch 1/2 patch 2/2 becomes very simple.

Compared to RFC v3 this series addresses comments from Bartlomiej,
thank you Bartlomiej for your review!

RFCv3..this PATCH:

- export thermal_zone_device_{enable|disable}() for drivers
- don't check provided enum values in acpi's thermal_zet_mode()
and in int3400_thermal_set_mode()
- use thermal_zone_device_enable() in of_thermal instead of open coding it
- use thermal_zone_device_{enable|disable}() in hisi_thermal, rockchip_thermal
and sprd_thermal
- assume THERMAL_DEVICE_ENABLED is thermal_zone_params not provided at
tzd's register time
- eliminated tzp-s which contain only .initial_mode = THERMAL_DEVICE_ENABLED,
- don't set tz->need_update and don't call thermal_zone_device_update()
at the end of thermal_zone_device_register()
- used .initial_mode in int340x_thermal_zone, x86_pkg_temp_thermal and
int3400_thermal

Andrzej Pietrasiewicz (2):
  thermal: core: Let thermal zone device's mode be stored in its struct
  thermal: core: Stop polling DISABLED thermal devices

 drivers/acpi/thermal.c                        | 35 ++--------
 .../ethernet/mellanox/mlxsw/core_thermal.c    | 42 ------------
 drivers/platform/x86/acerhdf.c                | 17 +----
 drivers/thermal/da9062-thermal.c              | 11 ----
 drivers/thermal/hisi_thermal.c                |  6 +-
 drivers/thermal/imx_thermal.c                 | 24 ++-----
 .../intel/int340x_thermal/int3400_thermal.c   | 31 ++-------
 .../int340x_thermal/int340x_thermal_zone.c    |  1 +
 .../thermal/intel/intel_quark_dts_thermal.c   | 22 ++-----
 drivers/thermal/intel/x86_pkg_temp_thermal.c  |  1 +
 drivers/thermal/of-thermal.c                  | 24 +------
 drivers/thermal/rockchip_thermal.c            |  6 +-
 drivers/thermal/sprd_thermal.c                |  6 +-
 drivers/thermal/thermal_core.c                | 65 ++++++++++++++++---
 drivers/thermal/thermal_core.h                |  3 +
 drivers/thermal/thermal_sysfs.c               | 29 +--------
 include/linux/thermal.h                       | 22 ++++++-
 17 files changed, 121 insertions(+), 224 deletions(-)


base-commit: 79799562bf087b30d9dd0fddf5bed2d3b038be08
-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
To: linux-pm@vger.kernel.org
Cc: Heiko Stuebner <heiko@sntech.de>,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>,
	platform-driver-x86@vger.kernel.org, kernel@collabora.com,
	Fabio Estevam <festevam@gmail.com>,
	Amit Kucheria <amit.kucheria@verdurent.com>,
	Chunyan Zhang <zhang.lyra@gmail.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	linux-acpi@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>,
	Orson Zhai <orsonzhai@gmail.com>, Zhang Rui <rui.zhang@intel.com>,
	Len Brown <lenb@kernel.org>,
	Barlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Ido Schimmel <idosch@mellanox.com>,
	Jiri Pirko <jiri@mellanox.com>,
	Darren Hart <dvhart@infradead.org>,
	linux-arm-kernel@lists.infradead.org,
	Support Opensource <support.opensource@diasemi.com>,
	netdev@vger.kernel.org, Peter Kaestle <peter@piie.net>,
	Andrzej Pietrasiewicz <andrzej.p@collabora.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Baolin Wang <baolin.wang7@gmail.com>,
	Shawn Guo <shawnguo@kernel.org>,
	"David S . Miller" <davem@davemloft.net>,
	Andy Shevchenko <andy@infradead.org>
Subject: [PATCH 0/2] Stop monitoring disabled devices
Date: Mon, 20 Apr 2020 20:17:39 +0200	[thread overview]
Message-ID: <20200420181741.13167-1-andrzej.p@collabora.com> (raw)
In-Reply-To: <d7efa7dd-6a07-beff-e3d1-8797dd203105@samsung.com>

After 3 revisions of an RFC I'm sending this as a PATCH series.

The first patch makes all the drivers store their mode in struct
thermal_zone_device. Such a move has consequences: driver-specific
variables for storing mode are not necessary. Consequently get_mode()
methods become obsolete. Then sysfs "mode" attribute stops depending
on get_mode() being provided, because it is always provided from now on.

The first patch also introduces the initial mode to be optionally passed
to thermal_zone_device_register().

Given all the groundwork done in patch 1/2 patch 2/2 becomes very simple.

Compared to RFC v3 this series addresses comments from Bartlomiej,
thank you Bartlomiej for your review!

RFCv3..this PATCH:

- export thermal_zone_device_{enable|disable}() for drivers
- don't check provided enum values in acpi's thermal_zet_mode()
and in int3400_thermal_set_mode()
- use thermal_zone_device_enable() in of_thermal instead of open coding it
- use thermal_zone_device_{enable|disable}() in hisi_thermal, rockchip_thermal
and sprd_thermal
- assume THERMAL_DEVICE_ENABLED is thermal_zone_params not provided at
tzd's register time
- eliminated tzp-s which contain only .initial_mode = THERMAL_DEVICE_ENABLED,
- don't set tz->need_update and don't call thermal_zone_device_update()
at the end of thermal_zone_device_register()
- used .initial_mode in int340x_thermal_zone, x86_pkg_temp_thermal and
int3400_thermal

Andrzej Pietrasiewicz (2):
  thermal: core: Let thermal zone device's mode be stored in its struct
  thermal: core: Stop polling DISABLED thermal devices

 drivers/acpi/thermal.c                        | 35 ++--------
 .../ethernet/mellanox/mlxsw/core_thermal.c    | 42 ------------
 drivers/platform/x86/acerhdf.c                | 17 +----
 drivers/thermal/da9062-thermal.c              | 11 ----
 drivers/thermal/hisi_thermal.c                |  6 +-
 drivers/thermal/imx_thermal.c                 | 24 ++-----
 .../intel/int340x_thermal/int3400_thermal.c   | 31 ++-------
 .../int340x_thermal/int340x_thermal_zone.c    |  1 +
 .../thermal/intel/intel_quark_dts_thermal.c   | 22 ++-----
 drivers/thermal/intel/x86_pkg_temp_thermal.c  |  1 +
 drivers/thermal/of-thermal.c                  | 24 +------
 drivers/thermal/rockchip_thermal.c            |  6 +-
 drivers/thermal/sprd_thermal.c                |  6 +-
 drivers/thermal/thermal_core.c                | 65 ++++++++++++++++---
 drivers/thermal/thermal_core.h                |  3 +
 drivers/thermal/thermal_sysfs.c               | 29 +--------
 include/linux/thermal.h                       | 22 ++++++-
 17 files changed, 121 insertions(+), 224 deletions(-)


base-commit: 79799562bf087b30d9dd0fddf5bed2d3b038be08
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-04-20 18:17 UTC|newest]

Thread overview: 412+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-07 17:49 [RFC 0/8] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-07 17:49 ` Andrzej Pietrasiewicz
2020-04-07 17:49 ` Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 1/8] thermal: int3400_thermal: Statically initialize .get_mode()/.set_mode() ops Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
     [not found]   ` <CGME20200415091204eucas1p1983548c2db52d8d0c2a5367034ec80dd@eucas1p1.samsung.com>
2020-04-15  9:12     ` Bartlomiej Zolnierkiewicz
2020-04-15  9:12       ` Bartlomiej Zolnierkiewicz
2020-04-15  9:12       ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 2/8] thermal: Properly handle mode values in .set_mode() Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
     [not found]   ` <CGME20200415100543eucas1p24e24293da39844ca8791db86af5365a7@eucas1p2.samsung.com>
2020-04-15 10:05     ` Bartlomiej Zolnierkiewicz
2020-04-15 10:05       ` Bartlomiej Zolnierkiewicz
2020-04-15 10:05       ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 3/8] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
     [not found]   ` <CGME20200415100944eucas1p1dcfeb784e790ca2fc3417fd2797e3f5d@eucas1p1.samsung.com>
2020-04-15 10:09     ` Bartlomiej Zolnierkiewicz
2020-04-15 10:09       ` Bartlomiej Zolnierkiewicz
2020-04-15 10:09       ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 4/8] thermal: core: Introduce THERMAL_DEVICE_INITIAL Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 5/8] thermal: core: Monitor thermal zone after mode change Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 6/8] thermal: Set initial state to THERMAL_DEVICE_INITIAL Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-07 17:49 ` [RFC 7/8] thermal: of: Monitor thermal zone after enabling it Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
     [not found]   ` <CGME20200415101829eucas1p18e21324d3c39926fffc6c8b5dc52f206@eucas1p1.samsung.com>
2020-04-15 10:18     ` Bartlomiej Zolnierkiewicz
2020-04-15 10:18       ` Bartlomiej Zolnierkiewicz
2020-04-15 10:18       ` Bartlomiej Zolnierkiewicz
2020-04-07 17:49 ` [RFC 8/8] thermal: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-07 17:49   ` Andrzej Pietrasiewicz
2020-04-09 10:29 ` [RFC 0/8] Stop monitoring disabled devices Daniel Lezcano
2020-04-09 10:29   ` Daniel Lezcano
2020-04-09 10:29   ` Daniel Lezcano
2020-04-09 11:10   ` Andrzej Pietrasiewicz
2020-04-09 11:10     ` Andrzej Pietrasiewicz
2020-04-09 11:10     ` Andrzej Pietrasiewicz
     [not found]     ` <CGME20200415104010eucas1p101278e53e34a2e56dfc7c82b533a9122@eucas1p1.samsung.com>
2020-04-15 10:40       ` Bartlomiej Zolnierkiewicz
2020-04-15 10:40         ` Bartlomiej Zolnierkiewicz
2020-04-15 10:40         ` Bartlomiej Zolnierkiewicz
2020-04-17 16:23         ` Andrzej Pietrasiewicz
2020-04-17 16:23           ` Andrzej Pietrasiewicz
2020-04-17 16:23           ` Andrzej Pietrasiewicz
2020-04-19 11:42           ` Bartlomiej Zolnierkiewicz
2020-04-19 11:42             ` Bartlomiej Zolnierkiewicz
2020-04-19 11:42             ` Bartlomiej Zolnierkiewicz
2020-04-17 21:11         ` Peter Kästle
2020-04-17 21:11           ` Peter Kästle
2020-04-17 21:11           ` Peter Kästle
2020-04-14 18:00   ` [RFC v2 0/9] " Andrzej Pietrasiewicz
2020-04-14 18:00     ` Andrzej Pietrasiewicz
2020-04-14 18:00     ` Andrzej Pietrasiewicz
2020-04-14 18:00     ` [RFC v2 1/9] thermal: int3400_thermal: Statically initialize .get_mode()/.set_mode() ops Andrzej Pietrasiewicz
2020-04-14 18:00       ` Andrzej Pietrasiewicz
2020-04-14 18:00       ` Andrzej Pietrasiewicz
2020-04-15  9:23       ` Daniel Lezcano
2020-04-15  9:23         ` Daniel Lezcano
2020-04-15  9:23         ` Daniel Lezcano
2020-04-14 18:00     ` [RFC v2 2/9] thermal: Eliminate an always-false condition Andrzej Pietrasiewicz
2020-04-14 18:00       ` Andrzej Pietrasiewicz
2020-04-14 18:00       ` Andrzej Pietrasiewicz
2020-04-14 18:00     ` [RFC v2 3/9] thermal: Properly handle mode values in .set_mode() Andrzej Pietrasiewicz
2020-04-14 18:00       ` Andrzej Pietrasiewicz
2020-04-14 18:00       ` Andrzej Pietrasiewicz
2020-04-14 22:14       ` Daniel Lezcano
2020-04-14 22:14         ` Daniel Lezcano
2020-04-14 22:14         ` Daniel Lezcano
2020-04-14 18:01     ` [RFC v2 4/9] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-14 22:30       ` Daniel Lezcano
2020-04-14 22:30         ` Daniel Lezcano
2020-04-14 22:30         ` Daniel Lezcano
2020-04-14 18:01     ` [RFC v2 5/9] thermal: Store mode in thermal_zone_device Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-15 10:55       ` Daniel Lezcano
2020-04-15 10:55         ` Daniel Lezcano
2020-04-15 10:55         ` Daniel Lezcano
2020-04-17 16:20         ` [RFC v3 0/2] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-17 16:20           ` Andrzej Pietrasiewicz
2020-04-17 16:20           ` Andrzej Pietrasiewicz
2020-04-17 16:20           ` [RFC v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-17 16:20             ` Andrzej Pietrasiewicz
2020-04-17 16:20             ` Andrzej Pietrasiewicz
2020-04-17 20:44             ` Andy Shevchenko
2020-04-17 20:44               ` Andy Shevchenko
2020-04-17 20:44               ` Andy Shevchenko
2020-04-19 11:38             ` Bartlomiej Zolnierkiewicz
2020-04-19 11:38               ` Bartlomiej Zolnierkiewicz
2020-04-19 11:38               ` Bartlomiej Zolnierkiewicz
2020-04-19 13:10               ` Bartlomiej Zolnierkiewicz
2020-04-19 13:10                 ` Bartlomiej Zolnierkiewicz
2020-04-19 13:10                 ` Bartlomiej Zolnierkiewicz
2020-04-20 18:17                 ` Andrzej Pietrasiewicz [this message]
2020-04-20 18:17                   ` [PATCH 0/2] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-20 18:17                   ` Andrzej Pietrasiewicz
2020-04-20 18:17                   ` [PATCH 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-20 18:17                     ` Andrzej Pietrasiewicz
2020-04-20 18:17                     ` Andrzej Pietrasiewicz
2020-04-22  7:49                     ` kbuild test robot
2020-04-22  7:49                       ` kbuild test robot
2020-04-22 17:14                       ` Andrzej Pietrasiewicz
2020-04-22 17:14                         ` Andrzej Pietrasiewicz
2020-04-22 17:03                     ` kbuild test robot
2020-04-22 17:03                       ` kbuild test robot
2020-04-22 17:15                       ` Andrzej Pietrasiewicz
2020-04-22 17:15                         ` Andrzej Pietrasiewicz
2020-04-20 18:17                   ` [PATCH 2/2] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-20 18:17                     ` Andrzej Pietrasiewicz
2020-04-20 18:17                     ` Andrzej Pietrasiewicz
2020-04-22 16:12                   ` [PATCH RESEND 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-22 16:12                     ` Andrzej Pietrasiewicz
2020-04-22 16:12                     ` Andrzej Pietrasiewicz
2020-04-23 14:39                     ` Bartlomiej Zolnierkiewicz
2020-04-23 14:39                       ` Bartlomiej Zolnierkiewicz
2020-04-23 14:39                       ` Bartlomiej Zolnierkiewicz
2020-04-23 16:57                       ` [PATCH v3 0/2] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-04-23 16:57                         ` Andrzej Pietrasiewicz
2020-04-23 16:57                         ` Andrzej Pietrasiewicz
2020-04-23 16:57                         ` [PATCH v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-23 16:57                           ` Andrzej Pietrasiewicz
2020-04-23 16:57                           ` Andrzej Pietrasiewicz
2020-05-04  7:00                           ` Bartlomiej Zolnierkiewicz
2020-05-04  7:00                             ` Bartlomiej Zolnierkiewicz
2020-05-04  7:00                             ` Bartlomiej Zolnierkiewicz
2020-04-23 16:57                         ` [PATCH v3 2/2] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-23 16:57                           ` Andrzej Pietrasiewicz
2020-04-23 16:57                           ` Andrzej Pietrasiewicz
2020-04-24  9:03                           ` Zhang, Rui
2020-04-24  9:03                             ` Zhang, Rui
2020-04-24  9:03                             ` Zhang, Rui
2020-04-27 14:20                             ` Zhang, Rui
2020-04-27 14:20                               ` Zhang, Rui
2020-04-27 14:20                               ` Zhang, Rui
2020-04-27 18:34                               ` Andrzej Pietrasiewicz
2020-04-27 18:34                                 ` Andrzej Pietrasiewicz
2020-04-27 18:34                                 ` Andrzej Pietrasiewicz
2020-04-28 13:55                                 ` Zhang, Rui
2020-04-28 13:55                                   ` Zhang, Rui
2020-04-28 13:55                                   ` Zhang, Rui
2020-04-20 11:03               ` [RFC v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Andrzej Pietrasiewicz
2020-04-20 11:03                 ` Andrzej Pietrasiewicz
2020-04-20 11:03                 ` Andrzej Pietrasiewicz
2020-04-20 18:19                 ` Andrzej Pietrasiewicz
2020-04-20 18:19                   ` Andrzej Pietrasiewicz
2020-04-20 18:19                   ` Andrzej Pietrasiewicz
2020-05-23 21:24             ` Daniel Lezcano
2020-05-23 21:24               ` Daniel Lezcano
2020-05-23 21:24               ` Daniel Lezcano
2020-05-25 19:35               ` Andrzej Pietrasiewicz
2020-05-25 19:35                 ` Andrzej Pietrasiewicz
2020-05-25 19:35                 ` Andrzej Pietrasiewicz
2020-05-25 22:08                 ` Daniel Lezcano
2020-05-25 22:08                   ` Daniel Lezcano
2020-05-25 22:08                   ` Daniel Lezcano
2020-05-26 16:56                   ` Andrzej Pietrasiewicz
2020-05-26 16:56                     ` Andrzej Pietrasiewicz
2020-05-26 16:56                     ` Andrzej Pietrasiewicz
2020-05-27 13:30               ` Bartlomiej Zolnierkiewicz
2020-05-27 13:30                 ` Bartlomiej Zolnierkiewicz
2020-05-27 13:30                 ` Bartlomiej Zolnierkiewicz
2020-04-17 16:20           ` [RFC v3 2/2] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-17 16:20             ` Andrzej Pietrasiewicz
2020-04-17 16:20             ` Andrzej Pietrasiewicz
2020-04-19 13:50           ` [RFC v3 1/2] thermal: core: Let thermal zone device's mode be stored in its struct Peter Kästle
2020-04-19 13:50             ` Peter Kästle
2020-04-19 13:50             ` Peter Kästle
2020-04-14 18:01     ` [RFC v2 6/9] thermal: Remove get_mode() method Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-14 18:01     ` [RFC v2 7/9] thermal: core: Monitor thermal zone after mode change Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-14 18:01     ` [RFC v2 8/9] thermal: of: Monitor thermal zone after enabling it Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-14 18:01     ` [RFC v2 9/9] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-14 18:01       ` Andrzej Pietrasiewicz
2020-04-14 21:52     ` [RFC v2 0/9] Stop monitoring disabled devices Ezequiel Garcia
2020-04-14 21:52       ` Ezequiel Garcia
2020-04-14 21:52       ` Ezequiel Garcia
     [not found] <Message-ID: <4493c0e4-51aa-3907-810c-74949ff27ca4@samsung.com>
2020-05-28 19:20 ` [PATCH v4 00/11] " Andrzej Pietrasiewicz
2020-05-28 19:20   ` Andrzej Pietrasiewicz
2020-05-28 19:20   ` Andrzej Pietrasiewicz
2020-05-28 19:20   ` [PATCH v4 01/11] acpi: thermal: Fix error handling in the register function Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-29 14:50     ` Guenter Roeck
2020-05-29 14:50       ` Guenter Roeck
2020-05-29 14:50       ` Guenter Roeck
2020-06-24  8:16     ` Bartlomiej Zolnierkiewicz
2020-06-24  8:16       ` Bartlomiej Zolnierkiewicz
2020-06-24  8:16       ` Bartlomiej Zolnierkiewicz
2020-06-24 12:54     ` Rafael J. Wysocki
2020-06-26 17:31       ` Andrzej Pietrasiewicz
2020-06-26 17:36         ` Rafael J. Wysocki
2020-05-28 19:20   ` [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-29 14:48     ` Guenter Roeck
2020-05-29 14:48       ` Guenter Roeck
2020-05-29 14:48       ` Guenter Roeck
2020-05-29 15:13       ` Andrzej Pietrasiewicz
2020-05-29 15:13         ` Andrzej Pietrasiewicz
2020-05-29 15:13         ` Andrzej Pietrasiewicz
2020-05-29 15:34         ` Guenter Roeck
2020-05-29 15:34           ` Guenter Roeck
2020-05-29 15:34           ` Guenter Roeck
2020-06-24  9:38     ` Bartlomiej Zolnierkiewicz
2020-06-24  9:38       ` Bartlomiej Zolnierkiewicz
2020-06-24  9:38       ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 03/11] thermal: Add current mode to thermal zone device Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-29 14:51     ` Guenter Roeck
2020-05-29 14:51       ` Guenter Roeck
2020-05-29 14:51       ` Guenter Roeck
2020-06-24  9:39     ` Bartlomiej Zolnierkiewicz
2020-06-24  9:39       ` Bartlomiej Zolnierkiewicz
2020-06-24  9:39       ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-06-24  9:40     ` Bartlomiej Zolnierkiewicz
2020-06-24  9:40       ` Bartlomiej Zolnierkiewicz
2020-06-24  9:40       ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 05/11] thermal: remove get_mode() operation of drivers Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-06-24  9:47     ` Bartlomiej Zolnierkiewicz
2020-06-24  9:47       ` Bartlomiej Zolnierkiewicz
2020-06-24  9:47       ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 06/11] thermal: Add mode helpers Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-06-24  9:49     ` Bartlomiej Zolnierkiewicz
2020-06-24  9:49       ` Bartlomiej Zolnierkiewicz
2020-06-24  9:49       ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 07/11] thermal: Use mode helpers in drivers Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-06-24  9:51     ` Bartlomiej Zolnierkiewicz
2020-06-24  9:51       ` Bartlomiej Zolnierkiewicz
2020-06-24  9:51       ` Bartlomiej Zolnierkiewicz
2020-06-26 16:08       ` Andrzej Pietrasiewicz
2020-06-26 16:08         ` Andrzej Pietrasiewicz
2020-06-26 16:08         ` Andrzej Pietrasiewicz
2020-05-28 19:20   ` [PATCH v4 08/11] thermal: Explicitly enable non-changing thermal zone devices Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-06-24 10:00     ` Bartlomiej Zolnierkiewicz
2020-06-24 10:00       ` Bartlomiej Zolnierkiewicz
2020-06-24 10:00       ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 09/11] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-06-24 10:02     ` Bartlomiej Zolnierkiewicz
2020-06-24 10:02       ` Bartlomiej Zolnierkiewicz
2020-06-24 10:02       ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-06-24 10:03     ` Bartlomiej Zolnierkiewicz
2020-06-24 10:03       ` Bartlomiej Zolnierkiewicz
2020-06-24 10:03       ` Bartlomiej Zolnierkiewicz
2020-05-28 19:20   ` [PATCH v4 11/11] thermal: Rename set_mode() to change_mode() Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-05-28 19:20     ` Andrzej Pietrasiewicz
2020-06-24 10:03     ` Bartlomiej Zolnierkiewicz
2020-06-24 10:03       ` Bartlomiej Zolnierkiewicz
2020-06-24 10:03       ` Bartlomiej Zolnierkiewicz
2020-06-01 11:36   ` [PATCH v4 02/11] thermal: Store thermal mode in a dedicated enum Peter Kästle
2020-06-01 11:36     ` Peter Kästle
2020-06-01 11:36     ` Peter Kästle
2020-06-01 11:36   ` [PATCH v4 04/11] thermal: Store device mode in struct thermal_zone_device Peter Kästle
2020-06-01 11:36     ` Peter Kästle
2020-06-01 11:36     ` Peter Kästle
2020-06-01 11:37   ` [PATCH v4 05/11] thermal: remove get_mode() operation of drivers Peter Kästle
2020-06-01 11:37     ` Peter Kästle
2020-06-01 11:37     ` Peter Kästle
2020-06-01 11:37   ` [PATCH v4 07/11] thermal: Use mode helpers in drivers Peter Kästle
2020-06-01 11:37     ` Peter Kästle
2020-06-01 11:37     ` Peter Kästle
2020-06-01 11:38   ` [PATCH v4 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Peter Kästle
2020-06-01 11:38     ` Peter Kästle
2020-06-01 11:38     ` Peter Kästle
2020-06-01 11:38   ` [PATCH v4 11/11] thermal: Rename set_mode() to change_mode() Peter Kästle
2020-06-01 11:38     ` Peter Kästle
2020-06-01 11:38     ` Peter Kästle
2020-06-23 14:37   ` [PATCH v4 00/11] Stop monitoring disabled devices Daniel Lezcano
2020-06-23 14:37     ` Daniel Lezcano
2020-06-23 14:37     ` Daniel Lezcano
2020-06-26 17:37     ` [PATCH v5 " Andrzej Pietrasiewicz
2020-06-26 17:37       ` Andrzej Pietrasiewicz
2020-06-26 17:37       ` Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 01/11] acpi: thermal: Fix error handling in the register function Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-29  7:19         ` Amit Kucheria
2020-06-29  7:19           ` Amit Kucheria
2020-06-29  7:19           ` Amit Kucheria
2020-06-26 17:37       ` [PATCH v5 02/11] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-29  7:19         ` Amit Kucheria
2020-06-29  7:19           ` Amit Kucheria
2020-06-29  7:19           ` Amit Kucheria
2020-06-26 17:37       ` [PATCH v5 03/11] thermal: Add current mode to thermal zone device Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-29  7:19         ` Amit Kucheria
2020-06-29  7:19           ` Amit Kucheria
2020-06-29  7:19           ` Amit Kucheria
2020-06-26 17:37       ` [PATCH v5 04/11] thermal: Store device mode in struct thermal_zone_device Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-29  7:19         ` Amit Kucheria
2020-06-29  7:19           ` Amit Kucheria
2020-06-29  7:19           ` Amit Kucheria
2020-06-26 17:37       ` [PATCH v5 05/11] thermal: remove get_mode() operation of drivers Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-29  7:20         ` Amit Kucheria
2020-06-29  7:20           ` Amit Kucheria
2020-06-29  7:20           ` Amit Kucheria
2020-06-26 17:37       ` [PATCH v5 06/11] thermal: Add mode helpers Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 20:50         ` kernel test robot
2020-06-26 20:50           ` kernel test robot
2020-06-26 20:50           ` kernel test robot
2020-06-26 20:50         ` [RFC PATCH] thermal: thermal_zone_device_set_mode() can be static kernel test robot
2020-06-26 20:50           ` kernel test robot
2020-06-26 20:50           ` kernel test robot
2020-06-26 20:55         ` [PATCH v5 06/11] thermal: Add mode helpers kernel test robot
2020-06-26 20:55           ` kernel test robot
2020-06-26 20:55           ` kernel test robot
2020-06-26 23:34         ` kernel test robot
2020-06-26 23:34           ` kernel test robot
2020-06-29  7:04         ` Amit Kucheria
2020-06-29  7:04           ` Amit Kucheria
2020-06-29  7:04           ` Amit Kucheria
2020-06-29 11:16           ` [PATCH v6 00/11] Stop monitoring disabled devices Andrzej Pietrasiewicz
2020-06-29 11:16             ` Andrzej Pietrasiewicz
2020-06-29 11:16             ` Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 01/11] acpi: thermal: Fix error handling in the register function Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 02/11] thermal: Store thermal mode in a dedicated enum Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 03/11] thermal: Add current mode to thermal zone device Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 04/11] thermal: Store device mode in struct thermal_zone_device Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 05/11] thermal: remove get_mode() operation of drivers Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 06/11] thermal: Add mode helpers Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 12:08               ` Daniel Lezcano
2020-06-29 12:08                 ` Daniel Lezcano
2020-06-29 12:08                 ` Daniel Lezcano
2020-06-29 11:16             ` [PATCH v6 07/11] thermal: Use mode helpers in drivers Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 08/11] thermal: Explicitly enable non-changing thermal zone devices Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 09/11] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16             ` [PATCH v6 11/11] thermal: Rename set_mode() to change_mode() Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-29 11:16               ` Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 07/11] thermal: Use mode helpers in drivers Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 08/11] thermal: Explicitly enable non-changing thermal zone devices Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 09/11] thermal: core: Stop polling DISABLED thermal devices Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 10/11] thermal: Simplify or eliminate unnecessary set_mode() methods Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37       ` [PATCH v5 11/11] thermal: Rename set_mode() to change_mode() Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-26 17:37         ` Andrzej Pietrasiewicz
2020-06-01 10:02 ` [PATCH v4 00/11] Stop monitoring disabled devices Peter Kästle
2020-06-01 10:02   ` Peter Kästle
2020-06-01 10:02   ` Peter Kästle
2020-06-01 10:20   ` Andrzej Pietrasiewicz
2020-06-01 10:20     ` Andrzej Pietrasiewicz
2020-06-01 10:20     ` Andrzej Pietrasiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200420181741.13167-1-andrzej.p@collabora.com \
    --to=andrzej.p@collabora.com \
    --cc=amit.kucheria@verdurent.com \
    --cc=andy@infradead.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=baolin.wang7@gmail.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=davem@davemloft.net \
    --cc=dvhart@infradead.org \
    --cc=festevam@gmail.com \
    --cc=heiko@sntech.de \
    --cc=idosch@mellanox.com \
    --cc=jiri@mellanox.com \
    --cc=kernel@collabora.com \
    --cc=kernel@pengutronix.de \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-pm@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=orsonzhai@gmail.com \
    --cc=peter@piie.net \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=rui.zhang@intel.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=support.opensource@diasemi.com \
    --cc=zhang.lyra@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.