From: Oleksij Rempel <o.rempel@pengutronix.de> To: Mark Rutland <mark.rutland@arm.com>, Rob Herring <robh+dt@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawnguo@kernel.org> Cc: Oleksij Rempel <o.rempel@pengutronix.de>, devicetree@vger.kernel.org, Fabio Estevam <festevam@gmail.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de> Subject: [PATCH v6 0/5] mainline Protonic boards Date: Tue, 21 Apr 2020 14:40:52 +0200 [thread overview] Message-ID: <20200421124057.19238-1-o.rempel@pengutronix.de> (raw) changes v6: - move fsl.yaml changes to separate patch - remove partitions, they are provided by the bootloader - update flash compatible - rename can3 to can - fix fsl,mode - fix interrupt in the wlan node on PRTI6Q changes v5: - PRTI6Q: remove status from the pwm-backlight node - drop the vendor-prefixes patch, it is already taken by Rob - add Reviewed-by: Rob Herring <robh@kernel.org> changes v4: - VT7: fix typo changes v3: - move compatible to the start of node - move status to the end - use generic names in compatible - refactor dts/dtsi - use alphabet order for pinctrl and phandels - remove unused or currently not supported nodes changes v2: - squash PRTI6Q patches Oleksij Rempel (5): ARM: dts: add Protonic PRTI6Q board ARM: dts: add Protonic WD2 board ARM: dts: add Protonic VT7 board ARM: dts: add Protonic RVT board dt-bindings: arm: fsl: add different Protonic boards .../devicetree/bindings/arm/fsl.yaml | 4 + arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/imx6dl-prtrvt.dts | 182 ++++++ arch/arm/boot/dts/imx6dl-prtvt7.dts | 472 ++++++++++++++++ arch/arm/boot/dts/imx6q-prti6q.dts | 529 ++++++++++++++++++ arch/arm/boot/dts/imx6q-prtwd2.dts | 188 +++++++ arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 174 ++++++ 7 files changed, 1553 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-prtrvt.dts create mode 100644 arch/arm/boot/dts/imx6dl-prtvt7.dts create mode 100644 arch/arm/boot/dts/imx6q-prti6q.dts create mode 100644 arch/arm/boot/dts/imx6q-prtwd2.dts create mode 100644 arch/arm/boot/dts/imx6qdl-prti6q.dtsi -- 2.26.1
WARNING: multiple messages have this Message-ID (diff)
From: Oleksij Rempel <o.rempel@pengutronix.de> To: Mark Rutland <mark.rutland@arm.com>, Rob Herring <robh+dt@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Shawn Guo <shawnguo@kernel.org> Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Oleksij Rempel <o.rempel@pengutronix.de>, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 0/5] mainline Protonic boards Date: Tue, 21 Apr 2020 14:40:52 +0200 [thread overview] Message-ID: <20200421124057.19238-1-o.rempel@pengutronix.de> (raw) changes v6: - move fsl.yaml changes to separate patch - remove partitions, they are provided by the bootloader - update flash compatible - rename can3 to can - fix fsl,mode - fix interrupt in the wlan node on PRTI6Q changes v5: - PRTI6Q: remove status from the pwm-backlight node - drop the vendor-prefixes patch, it is already taken by Rob - add Reviewed-by: Rob Herring <robh@kernel.org> changes v4: - VT7: fix typo changes v3: - move compatible to the start of node - move status to the end - use generic names in compatible - refactor dts/dtsi - use alphabet order for pinctrl and phandels - remove unused or currently not supported nodes changes v2: - squash PRTI6Q patches Oleksij Rempel (5): ARM: dts: add Protonic PRTI6Q board ARM: dts: add Protonic WD2 board ARM: dts: add Protonic VT7 board ARM: dts: add Protonic RVT board dt-bindings: arm: fsl: add different Protonic boards .../devicetree/bindings/arm/fsl.yaml | 4 + arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/imx6dl-prtrvt.dts | 182 ++++++ arch/arm/boot/dts/imx6dl-prtvt7.dts | 472 ++++++++++++++++ arch/arm/boot/dts/imx6q-prti6q.dts | 529 ++++++++++++++++++ arch/arm/boot/dts/imx6q-prtwd2.dts | 188 +++++++ arch/arm/boot/dts/imx6qdl-prti6q.dtsi | 174 ++++++ 7 files changed, 1553 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-prtrvt.dts create mode 100644 arch/arm/boot/dts/imx6dl-prtvt7.dts create mode 100644 arch/arm/boot/dts/imx6q-prti6q.dts create mode 100644 arch/arm/boot/dts/imx6q-prtwd2.dts create mode 100644 arch/arm/boot/dts/imx6qdl-prti6q.dtsi -- 2.26.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-04-21 12:41 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-04-21 12:40 Oleksij Rempel [this message] 2020-04-21 12:40 ` [PATCH v6 0/5] mainline Protonic boards Oleksij Rempel 2020-04-21 12:40 ` [PATCH v6 1/5] ARM: dts: add Protonic PRTI6Q board Oleksij Rempel 2020-04-21 12:40 ` Oleksij Rempel 2020-04-22 7:19 ` Marco Felsch 2020-04-22 7:19 ` Marco Felsch 2020-04-21 12:40 ` [PATCH v6 2/5] ARM: dts: add Protonic WD2 board Oleksij Rempel 2020-04-21 12:40 ` Oleksij Rempel 2020-04-21 12:40 ` [PATCH v6 3/5] ARM: dts: add Protonic VT7 board Oleksij Rempel 2020-04-21 12:40 ` Oleksij Rempel 2020-04-22 7:04 ` Marco Felsch 2020-04-22 7:04 ` Marco Felsch 2020-04-22 7:11 ` Marco Felsch 2020-04-22 7:11 ` Marco Felsch 2020-04-22 9:38 ` David Jander 2020-04-22 9:38 ` David Jander 2020-04-22 11:20 ` Marco Felsch 2020-04-22 11:20 ` Marco Felsch 2020-04-21 12:40 ` [PATCH v6 4/5] ARM: dts: add Protonic RVT board Oleksij Rempel 2020-04-21 12:40 ` Oleksij Rempel 2020-04-21 12:40 ` [PATCH v6 5/5] dt-bindings: arm: fsl: add different Protonic boards Oleksij Rempel 2020-04-21 12:40 ` Oleksij Rempel 2020-05-05 19:00 ` Rob Herring 2020-05-05 19:00 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200421124057.19238-1-o.rempel@pengutronix.de \ --to=o.rempel@pengutronix.de \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.