* [PATCH v2 0/3] Bluetooth: hci_qca: add support for QCA9377
@ 2020-04-23 1:34 ` Christian Hewitt
0 siblings, 0 replies; 10+ messages in thread
From: Christian Hewitt @ 2020-04-23 1:34 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, Rob Herring, netdev, devicetree,
linux-amlogic, linux-bluetooth, linux-kernel
Cc: Abhishek Pandit-Subedi, Christian Hewitt
From: Christian Hewittt <christianshewitt@gmail.com>
This series adds a new compatible for the QCA9377 BT device that is found
in many Android TV box devices, makes minor changes to allow max-speed
values for the device to be read from device-tree, and updates bindings
to reflect those changes.
v2 changes: rebase against bluetooth-next
Christian Hewitt (3):
dt-bindings: net: bluetooth: Add device tree bindings for QCA9377
Bluetooth: hci_qca: add compatible for QCA9377
Bluetooth: hci_qca: allow max-speed to be set for QCA9377 devices
.../bindings/net/qualcomm-bluetooth.txt | 5 +++++
drivers/bluetooth/hci_qca.c | 17 ++++++++++-------
2 files changed, 15 insertions(+), 7 deletions(-)
--
2.17.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 0/3] Bluetooth: hci_qca: add support for QCA9377
@ 2020-04-23 1:34 ` Christian Hewitt
0 siblings, 0 replies; 10+ messages in thread
From: Christian Hewitt @ 2020-04-23 1:34 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, Rob Herring, netdev, devicetree,
linux-amlogic, linux-bluetooth, linux-kernel
Cc: Abhishek Pandit-Subedi, Christian Hewitt
From: Christian Hewittt <christianshewitt@gmail.com>
This series adds a new compatible for the QCA9377 BT device that is found
in many Android TV box devices, makes minor changes to allow max-speed
values for the device to be read from device-tree, and updates bindings
to reflect those changes.
v2 changes: rebase against bluetooth-next
Christian Hewitt (3):
dt-bindings: net: bluetooth: Add device tree bindings for QCA9377
Bluetooth: hci_qca: add compatible for QCA9377
Bluetooth: hci_qca: allow max-speed to be set for QCA9377 devices
.../bindings/net/qualcomm-bluetooth.txt | 5 +++++
drivers/bluetooth/hci_qca.c | 17 ++++++++++-------
2 files changed, 15 insertions(+), 7 deletions(-)
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v2 1/3] dt-bindings: net: bluetooth: Add device tree bindings for QCA9377
2020-04-23 1:34 ` Christian Hewitt
@ 2020-04-23 1:34 ` Christian Hewitt
-1 siblings, 0 replies; 10+ messages in thread
From: Christian Hewitt @ 2020-04-23 1:34 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, Rob Herring, netdev, devicetree,
linux-amlogic, linux-bluetooth, linux-kernel
Cc: Abhishek Pandit-Subedi, Christian Hewitt
QCA9377 is a QCA ROME device frequently found in Android TV boxes.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
index aad2632c6443..709ca6d51650 100644
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
@@ -10,6 +10,7 @@ device the slave device is attached to.
Required properties:
- compatible: should contain one of the following:
* "qcom,qca6174-bt"
+ * "qcom,qca9377-bt"
* "qcom,wcn3990-bt"
* "qcom,wcn3991-bt"
* "qcom,wcn3998-bt"
@@ -21,6 +22,10 @@ Optional properties for compatible string qcom,qca6174-bt:
- clocks: clock provided to the controller (SUSCLK_32KHZ)
- firmware-name: specify the name of nvm firmware to load
+Optional properties for compatible string qcom,qca9377-bt:
+
+ - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
+
Required properties for compatible string qcom,wcn399x-bt:
- vddio-supply: VDD_IO supply regulator handle.
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 1/3] dt-bindings: net: bluetooth: Add device tree bindings for QCA9377
@ 2020-04-23 1:34 ` Christian Hewitt
0 siblings, 0 replies; 10+ messages in thread
From: Christian Hewitt @ 2020-04-23 1:34 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, Rob Herring, netdev, devicetree,
linux-amlogic, linux-bluetooth, linux-kernel
Cc: Abhishek Pandit-Subedi, Christian Hewitt
QCA9377 is a QCA ROME device frequently found in Android TV boxes.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
index aad2632c6443..709ca6d51650 100644
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
@@ -10,6 +10,7 @@ device the slave device is attached to.
Required properties:
- compatible: should contain one of the following:
* "qcom,qca6174-bt"
+ * "qcom,qca9377-bt"
* "qcom,wcn3990-bt"
* "qcom,wcn3991-bt"
* "qcom,wcn3998-bt"
@@ -21,6 +22,10 @@ Optional properties for compatible string qcom,qca6174-bt:
- clocks: clock provided to the controller (SUSCLK_32KHZ)
- firmware-name: specify the name of nvm firmware to load
+Optional properties for compatible string qcom,qca9377-bt:
+
+ - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
+
Required properties for compatible string qcom,wcn399x-bt:
- vddio-supply: VDD_IO supply regulator handle.
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 2/3] Bluetooth: hci_qca: add compatible for QCA9377
2020-04-23 1:34 ` Christian Hewitt
@ 2020-04-23 1:34 ` Christian Hewitt
-1 siblings, 0 replies; 10+ messages in thread
From: Christian Hewitt @ 2020-04-23 1:34 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, Rob Herring, netdev, devicetree,
linux-amlogic, linux-bluetooth, linux-kernel
Cc: Abhishek Pandit-Subedi, Christian Hewitt
Add a compatible so QCA9377 devices can be defined in device-tree.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
drivers/bluetooth/hci_qca.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index d0ac554584a4..072983dc07e3 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2058,6 +2058,7 @@ static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
static const struct of_device_id qca_bluetooth_of_match[] = {
{ .compatible = "qcom,qca6174-bt" },
{ .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
+ { .compatible = "qcom,qca9377-bt" },
{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
{ .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 2/3] Bluetooth: hci_qca: add compatible for QCA9377
@ 2020-04-23 1:34 ` Christian Hewitt
0 siblings, 0 replies; 10+ messages in thread
From: Christian Hewitt @ 2020-04-23 1:34 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, Rob Herring, netdev, devicetree,
linux-amlogic, linux-bluetooth, linux-kernel
Cc: Abhishek Pandit-Subedi, Christian Hewitt
Add a compatible so QCA9377 devices can be defined in device-tree.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
drivers/bluetooth/hci_qca.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index d0ac554584a4..072983dc07e3 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2058,6 +2058,7 @@ static SIMPLE_DEV_PM_OPS(qca_pm_ops, qca_suspend, qca_resume);
static const struct of_device_id qca_bluetooth_of_match[] = {
{ .compatible = "qcom,qca6174-bt" },
{ .compatible = "qcom,qca6390-bt", .data = &qca_soc_data_qca6390},
+ { .compatible = "qcom,qca9377-bt" },
{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
{ .compatible = "qcom,wcn3991-bt", .data = &qca_soc_data_wcn3991},
{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 3/3] Bluetooth: hci_qca: allow max-speed to be set for QCA9377 devices
2020-04-23 1:34 ` Christian Hewitt
@ 2020-04-23 1:34 ` Christian Hewitt
-1 siblings, 0 replies; 10+ messages in thread
From: Christian Hewitt @ 2020-04-23 1:34 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, Rob Herring, netdev, devicetree,
linux-amlogic, linux-bluetooth, linux-kernel
Cc: Abhishek Pandit-Subedi, Christian Hewitt
Move the read of max-speed from device-tree out of the qca_is_wcn399x
if block so oper_speed can be set for QCA9377 devices as well.
Suggested-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
drivers/bluetooth/hci_qca.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 072983dc07e3..b3fd07a6f812 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -597,10 +597,12 @@ static int qca_open(struct hci_uart *hu)
if (hu->serdev) {
qcadev = serdev_device_get_drvdata(hu->serdev);
- if (qca_is_wcn399x(qcadev->btsoc_type)) {
+
+ if (qca_is_wcn399x(qcadev->btsoc_type))
hu->init_speed = qcadev->init_speed;
+
+ if (qcadev->oper_speed)
hu->oper_speed = qcadev->oper_speed;
- }
}
timer_setup(&qca->wake_retrans_timer, hci_ibs_wake_retrans_timeout, 0);
@@ -1871,6 +1873,11 @@ static int qca_serdev_probe(struct serdev_device *serdev)
serdev_device_set_drvdata(serdev, qcadev);
device_property_read_string(&serdev->dev, "firmware-name",
&qcadev->firmware_name);
+ device_property_read_u32(&serdev->dev, "max-speed",
+ &qcadev->oper_speed);
+ if (!qcadev->oper_speed)
+ BT_DBG("UART will pick default operating speed");
+
if (data && qca_is_wcn399x(data->soc_type)) {
qcadev->btsoc_type = data->soc_type;
qcadev->bt_power = devm_kzalloc(&serdev->dev,
@@ -1895,11 +1902,6 @@ static int qca_serdev_probe(struct serdev_device *serdev)
return PTR_ERR(qcadev->susclk);
}
- device_property_read_u32(&serdev->dev, "max-speed",
- &qcadev->oper_speed);
- if (!qcadev->oper_speed)
- BT_DBG("UART will pick default operating speed");
-
err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
if (err) {
BT_ERR("wcn3990 serdev registration failed");
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v2 3/3] Bluetooth: hci_qca: allow max-speed to be set for QCA9377 devices
@ 2020-04-23 1:34 ` Christian Hewitt
0 siblings, 0 replies; 10+ messages in thread
From: Christian Hewitt @ 2020-04-23 1:34 UTC (permalink / raw)
To: Marcel Holtmann, Johan Hedberg, Rob Herring, netdev, devicetree,
linux-amlogic, linux-bluetooth, linux-kernel
Cc: Abhishek Pandit-Subedi, Christian Hewitt
Move the read of max-speed from device-tree out of the qca_is_wcn399x
if block so oper_speed can be set for QCA9377 devices as well.
Suggested-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
drivers/bluetooth/hci_qca.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 072983dc07e3..b3fd07a6f812 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -597,10 +597,12 @@ static int qca_open(struct hci_uart *hu)
if (hu->serdev) {
qcadev = serdev_device_get_drvdata(hu->serdev);
- if (qca_is_wcn399x(qcadev->btsoc_type)) {
+
+ if (qca_is_wcn399x(qcadev->btsoc_type))
hu->init_speed = qcadev->init_speed;
+
+ if (qcadev->oper_speed)
hu->oper_speed = qcadev->oper_speed;
- }
}
timer_setup(&qca->wake_retrans_timer, hci_ibs_wake_retrans_timeout, 0);
@@ -1871,6 +1873,11 @@ static int qca_serdev_probe(struct serdev_device *serdev)
serdev_device_set_drvdata(serdev, qcadev);
device_property_read_string(&serdev->dev, "firmware-name",
&qcadev->firmware_name);
+ device_property_read_u32(&serdev->dev, "max-speed",
+ &qcadev->oper_speed);
+ if (!qcadev->oper_speed)
+ BT_DBG("UART will pick default operating speed");
+
if (data && qca_is_wcn399x(data->soc_type)) {
qcadev->btsoc_type = data->soc_type;
qcadev->bt_power = devm_kzalloc(&serdev->dev,
@@ -1895,11 +1902,6 @@ static int qca_serdev_probe(struct serdev_device *serdev)
return PTR_ERR(qcadev->susclk);
}
- device_property_read_u32(&serdev->dev, "max-speed",
- &qcadev->oper_speed);
- if (!qcadev->oper_speed)
- BT_DBG("UART will pick default operating speed");
-
err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
if (err) {
BT_ERR("wcn3990 serdev registration failed");
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/3] Bluetooth: hci_qca: add support for QCA9377
2020-04-23 1:34 ` Christian Hewitt
@ 2020-04-28 9:34 ` Marcel Holtmann
-1 siblings, 0 replies; 10+ messages in thread
From: Marcel Holtmann @ 2020-04-28 9:34 UTC (permalink / raw)
To: Christian Hewitt
Cc: Johan Hedberg, Rob Herring, netdev, devicetree, linux-amlogic,
linux-bluetooth, linux-kernel, Abhishek Pandit-Subedi
Hi Christian,
> This series adds a new compatible for the QCA9377 BT device that is found
> in many Android TV box devices, makes minor changes to allow max-speed
> values for the device to be read from device-tree, and updates bindings
> to reflect those changes.
>
> v2 changes: rebase against bluetooth-next
>
> Christian Hewitt (3):
> dt-bindings: net: bluetooth: Add device tree bindings for QCA9377
> Bluetooth: hci_qca: add compatible for QCA9377
> Bluetooth: hci_qca: allow max-speed to be set for QCA9377 devices
>
> .../bindings/net/qualcomm-bluetooth.txt | 5 +++++
> drivers/bluetooth/hci_qca.c | 17 ++++++++++-------
> 2 files changed, 15 insertions(+), 7 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2 0/3] Bluetooth: hci_qca: add support for QCA9377
@ 2020-04-28 9:34 ` Marcel Holtmann
0 siblings, 0 replies; 10+ messages in thread
From: Marcel Holtmann @ 2020-04-28 9:34 UTC (permalink / raw)
To: Christian Hewitt
Cc: devicetree, Johan Hedberg, netdev, linux-kernel, linux-bluetooth,
Rob Herring, Abhishek Pandit-Subedi, linux-amlogic
Hi Christian,
> This series adds a new compatible for the QCA9377 BT device that is found
> in many Android TV box devices, makes minor changes to allow max-speed
> values for the device to be read from device-tree, and updates bindings
> to reflect those changes.
>
> v2 changes: rebase against bluetooth-next
>
> Christian Hewitt (3):
> dt-bindings: net: bluetooth: Add device tree bindings for QCA9377
> Bluetooth: hci_qca: add compatible for QCA9377
> Bluetooth: hci_qca: allow max-speed to be set for QCA9377 devices
>
> .../bindings/net/qualcomm-bluetooth.txt | 5 +++++
> drivers/bluetooth/hci_qca.c | 17 ++++++++++-------
> 2 files changed, 15 insertions(+), 7 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-04-28 9:34 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-23 1:34 [PATCH v2 0/3] Bluetooth: hci_qca: add support for QCA9377 Christian Hewitt
2020-04-23 1:34 ` Christian Hewitt
2020-04-23 1:34 ` [PATCH v2 1/3] dt-bindings: net: bluetooth: Add device tree bindings " Christian Hewitt
2020-04-23 1:34 ` Christian Hewitt
2020-04-23 1:34 ` [PATCH v2 2/3] Bluetooth: hci_qca: add compatible " Christian Hewitt
2020-04-23 1:34 ` Christian Hewitt
2020-04-23 1:34 ` [PATCH v2 3/3] Bluetooth: hci_qca: allow max-speed to be set for QCA9377 devices Christian Hewitt
2020-04-23 1:34 ` Christian Hewitt
2020-04-28 9:34 ` [PATCH v2 0/3] Bluetooth: hci_qca: add support for QCA9377 Marcel Holtmann
2020-04-28 9:34 ` Marcel Holtmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.