* [PULL] First set of IIO new device support, cleanups etc for the 5.8 cycle
@ 2020-04-22 20:31 Jonathan Cameron
2020-04-23 9:10 ` Greg KH
0 siblings, 1 reply; 2+ messages in thread
From: Jonathan Cameron @ 2020-04-22 20:31 UTC (permalink / raw)
To: gregkh, linux-iio
The following changes since commit 825c6f470c62da05195fab57bb6561ccc1bdafcd:
staging: mt7621-pci: be sure gpio descriptor is null on fails (2020-03-20 15:10:51 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.8a
for you to fetch changes up to 2de8c02349f02d014e51b43f306d28fc7a23ea6e:
iio: magnetometer: ak8974: Silence deferred-probe error (2020-04-19 16:56:43 +0100)
----------------------------------------------------------------
First set of new IIO device support, features and cleanup for the 5.8 cycle
Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)
New device support
* ad7476
- Add ad7091 support (ID only)
* ad9467
- New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
- New driver to support ADIs generic AXI ADC IP core, used to provide
high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
paired with a device using a slow configuration interface (spi etc)
Includes DT bindings and some fixes for fpga headers.
* bmg160
- Add support for BMI088 (ID only)
* max1241
- New driver for this ADC.
* st_sensors
- Add support for LIS2HH12 accelerometer
* sx9310
- New driver supporting sx9310 and sx9311 proximity sensors.
Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000
Features
* st_lsm6dsx
- Add LIS3MDL as a possible sensor hub device.
* vcnl4000
- Add new concept of near level (from DT) to provide to userspace which
often needs to have some calibrated concept of 'near'.
Cleanups, minor fixes etc.
* core
- Use snprintf for functions where strings are built and there is
potential for overflow.
- Correct docs to indicate mlock should not be used directly by drivers.
- Fix up accidental dropping of a patch to use bitmap_zalloc.
- Stop allowing enabling of buffers with no channels enabled.
- Drop unused 'stufftoread' from iio_buffer.
- Drop scan_el_attrs form iio_buffer as unused.
- Reorder sanity checks in __iio_device_register to fail earlier.
- Drop all the devm_ runregister / free functions from IIO as they
were never used and encourage poor design.
* dma-buffer
- Tidy up includes.
* dma-engine-buffer
- Provide dev-managed allocator.
- Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
- Replace some unnecessary casts of error ptrs and whilst there.
use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
- Drop casts in calls to regmap_bulk_read as they make no sense.
- Use devm_platform_ioremap_resource to reduce boilerplate.
- Fix typos in Analog Devices.
* counters/104-quad
- Add Syed Nayyar Waris as an additional maintainer.
* ad7476
- Generate CONVST signal internally rather than requiring external
trigger. Add sysfs read back as can now do so.
- use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
- Switch to read_avail from explicit attribute. Mostly done to avoid
confusing people with a - sign (without surounding spaces) that
was correct but checkpatch didn't like.
* adis library
- Add missing newlines at end of error messages.
* adis16400
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
- Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
- Move some channel definitions into individual drivers to avoid
having to deal with complex options.
* ak8974
- Silence an error on deffered probe.
* bmp280
- Harden against IRQ before registration.
- Convert to read_avail instead of opencoding the equivalent.
- Explicitly mark GPIO as optional.
- Cleanup casts.
- Remove line breaks from strings.
* htts221
- Replace direct access to platform_data with dev_get_platdata().
- Use device properties rather than device tree ones to allow ACPI
probing.
- Casting cleanups.
* intel_mrfld_adc
- Don't use unaligned accessor for aligned data.
* isl29125
- Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
- Remove comp to bool.
* max1363
- Stop using mlock from the iio_dev directly in favour of a local lock
with clearly defined scope.
* max30100
- Use generic device properties to allow ACPI probe.
* mpu6050
- Convert to i2c_new_client_device.
- Add debugfs register access.
* st_lsm6dsx
- Provide means of configuring full scale on slave device if supported.
- Drop include of st_sensors header to get one value. Its not otherwise
used by this driver.
* st-sensors
- Replace direct access to platform_data with dev_get_platdata().
- Casting cleanups.
- Avoid splitting strings.
* st_uvis25
- Casting cleanups.
* tsl2563
- Typo fix.
* tsl2772
- scnprintf in a non obvious string building usecase. Note also 'fixes'
a wrong calculation of remaining space that couldn't actually cause
any trouble as there was lots of room.
* xilinx-xadc
- Fix Lars-Peter spelling his own name wrong :) + additional typos.
----------------------------------------------------------------
Aishwarya Ramakrishnan (3):
iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource
iio: adc: at91-adc: Use devm_platform_ioremap_resource
iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource
Alexandru Ardelean (24):
iio: adc: ad7780: define/use own IIO channel macros
iio: adc: ad7791: define/use own IIO channel macros
iio: adc: ad7793: define/use own IIO channel macros
iio: ad_sigma_delta: remove unused IIO channel macros
iio: buffer: re-introduce bitmap_zalloc() for trialmask
iio: adc: ad7793: use read_avail iio hook for scale available
iio: buffer: drop left-over 'stufftoread' field
include: fpga: adi-axi-common.h: fixup whitespace tab -> space
include: fpga: adi-axi-common.h: add version helper macros
iio: buffer-dmaengine: use %zu specifier for sprintf(align)
iio: buffer-dmaengine: add dev-managed calls for buffer alloc
dt-bindings: iio: adc: add bindings doc for AXI ADC driver
dt-bindings: iio: adc: add bindings doc for AD9467 ADC
iio: buffer: remove 'scan_el_attrs' attribute group from buffer struct
iio: move 'indio_dev->info' null check first in __iio_device_register()
iio: core: drop devm_iio_device_unregister() API call
iio: core: drop devm_iio_triggered_buffer_cleanup() API call
iio: core: drop devm_iio_device_free() API call
iio: core: drop devm_iio_trigger_unregister() API call
iio: core: drop devm_iio_trigger_free() API call
iio: inkern: drop devm_iio_channel_release{_all} API calls
iio: buffer: drop devm_iio_hw_consumer_free() API call
iio: buffer: drop devm_iio_kfifo_free() API call
iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
Alexandru Lazar (2):
dt-bindings: iio: adc: Add MAX1241 bindings
iio: adc: Add MAX1241 driver
Andy Shevchenko (14):
iio: light: st_uvis25: Drop unneeded casting when print error code
iio: st_sensors: Use dev_get_platdata() to get platform_data
iio: st_sensors: Drop unneeded explicit castings
iio: st_sensors: Drop unneeded casting when print error code
iio: st_sensors: Join string literals back
iio: humidity: hts221: Use dev_get_platdata() to get platform_data
iio: humidity: hts221: Make use of device properties
iio: humidity: hts221: Drop unneeded casting when print error code
iio: adc: intel_mrfld_adc: Use be16_to_cpu() instead of get_unaligned_be16()
iio: pressure: bmp280: Tolerate IRQ before registering
iio: pressure: bmp280: Convert to use ->read_avail()
iio: pressure: bmp280: Explicitly mark GPIO optional
iio: pressure: bmp280: Drop unneeded explicit castings
iio: pressure: bmp280: Join string literals back
Beniamin Bia (1):
iio: adc: ad7476: implement devm_add_action_or_reset
Christophe JAILLET (1):
iio: imu: adis: Add a missing '\n' in a log message
Daniel Campello (1):
iio: Add SEMTECH SX9310/9311 sensor driver
Dmitry Osipenko (1):
iio: magnetometer: ak8974: Silence deferred-probe error
Dragos Bogdan (3):
iio: adc: ad7476: Generate CONVST signal internally
iio: adc: ad7476: Add IIO_CHAN_INFO_RAW for AD7091R
iio: adc: ad7476: Add AD7091 support
Fabrice Gasnier (1):
dt-bindings: iio: dac: stm32-dac: convert bindings to json-schema
Gaëtan André (2):
dt-bindings: st_sensors: add st,lis2hh12 compatible entry
iio: accel: st_sensors: add support for LIS2HH12
Geert Uytterhoeven (1):
iio: Fix misspellings of "Analog Devices"
Guido Günther (5):
dt-bindings: iio: vcnl4000: convert bindings to YAML format
dt-bindings: iio: Introduce common properties for iio sensors
dt-bindings: iio: light: vcnl4000: Add proximity-near-level
iio: vcnl4000: Export near level property for proximity sensor
Documentation: ABI: document IIO in_proximity_nearlevel file
Jimmy Assarsson (2):
iio: imu: st_lsm6dsx: Increase ODR_LIST_SIZE
iio: imu: st_lsm6dsx: Add sensor hub device LIS3MDL
Johan Jonker (3):
dt-bindings: iio: adc: convert rockchip saradc bindings to yaml
dt-bindings: iio: adc: rockchip-saradc: add description for rk3308
dt-bindings: iio: adc: rockchip-saradc: add description for px30
Jonathan Cameron (6):
iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls
iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls
iio:chemical:bme680: Tidy up parameters to regmap_bulk_read
iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.
iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read
Lars-Peter Clausen (4):
iio: xilinx-xadc: Fix typo in author's name
iio: buffer: Don't allow buffers without any channels enabled to be activated
iio: dma-buffer: Cleanup buffer.h/buffer_impl.h includes
iio: xilinx-xadc: Fix typo
Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: configure full scale on slave device if supported
iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver
Michael Hennerich (2):
iio: adc: adi-axi-adc: add support for AXI ADC IP core
iio: adc: ad9467: add support AD9467 ADC
Mike Looijmans (1):
iio/gyro/bmg160: Add support for BMI088 chip
Nishant Malpani (11):
iio: light: tsl2563: Rename macro to fix typo
iio: accel: kxsd9: Use vsprintf extension %pe for symbolic error name
iio: gyro: bmg160_i2c: Use vsprintf extension %pe for symbolic error name
iio: gyro: bmg160_spi: Use vsprintf extension %pe for symbolic error name
iio: gyro: mpu3050: Use vsprintf extension %pe for symbolic error name
iio: imu: bmi160_i2c: Use vsprintf extension %pe for symbolic error name
iio: imu: bmi160_spi: Use vsprintf extension %pe for symbolic error name
iio: imu: inv_mpu6050_i2c: Use vsprintf extension %pe for symbolic error name
iio: imu: inv_mpu6050_spi: Use vsprintf extension %pe for symbolic error name
iio: magn: bmc150: Use vsprintf extension %pe for symbolic error name
dt-bindings: iio: tsl2563: convert bindings to YAML
Rohit Sarkar (7):
iio: core: Make mlock internal to the iio core
iio: health: max30100: use generic property handler
iio: adc: max1363: replace uses of mlock
iio: imu: inv_mpu6050: add debugfs register r/w interface
iio: temperature: ltc2983: remove redundant comparison to bool
iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE
iio: imu: adis16460: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE
Syed Nayyar Waris (1):
MAINTAINERS: Add Syed Nayyar Waris to ACCES 104-QUAD-8 driver
Takashi Iwai (2):
iio: core: Use scnprintf() for avoiding potential buffer overflow
iio: tsl2772: Use scnprintf() for avoiding potential buffer overflow
Wolfram Sang (1):
iio: imu: inv_mpu6050: convert to use i2c_new_client_device()
Documentation/ABI/testing/sysfs-bus-iio-proximity | 10 +
Documentation/ABI/testing/sysfs-bus-iio-sx9310 | 10 +
.../devicetree/bindings/iio/adc/adi,ad9467.yaml | 65 ++
.../devicetree/bindings/iio/adc/adi,axi-adc.yaml | 62 ++
.../devicetree/bindings/iio/adc/maxim,max1241.yaml | 63 ++
.../bindings/iio/adc/rockchip-saradc.txt | 37 -
.../bindings/iio/adc/rockchip-saradc.yaml | 80 ++
Documentation/devicetree/bindings/iio/common.yaml | 35 +
.../devicetree/bindings/iio/dac/st,stm32-dac.txt | 63 --
.../devicetree/bindings/iio/dac/st,stm32-dac.yaml | 110 ++
.../devicetree/bindings/iio/gyroscope/bmg160.txt | 2 +-
.../bindings/iio/light/amstaos,tsl2563.yaml | 49 +
.../devicetree/bindings/iio/light/tsl2563.txt | 19 -
.../devicetree/bindings/iio/light/vcnl4000.txt | 24 -
.../bindings/iio/light/vishay,vcnl4000.yaml | 50 +
.../devicetree/bindings/iio/st-sensors.txt | 1 +
Documentation/driver-api/driver-model/devres.rst | 8 -
Documentation/driver-api/iio/triggers.rst | 2 -
MAINTAINERS | 1 +
drivers/iio/accel/Kconfig | 2 +-
drivers/iio/accel/kxsd9-i2c.c | 4 +-
drivers/iio/accel/mxc4005.c | 4 +-
drivers/iio/accel/st_accel.h | 2 +
drivers/iio/accel/st_accel_buffer.c | 3 +-
drivers/iio/accel/st_accel_core.c | 83 +-
drivers/iio/accel/st_accel_i2c.c | 5 +
drivers/iio/adc/Kconfig | 45 +
drivers/iio/adc/Makefile | 3 +
drivers/iio/adc/ad7476.c | 59 +-
drivers/iio/adc/ad7780.c | 27 +-
drivers/iio/adc/ad7791.c | 64 +-
drivers/iio/adc/ad7793.c | 144 ++-
drivers/iio/adc/ad9467.c | 422 ++++++++
drivers/iio/adc/adi-axi-adc.c | 482 +++++++++
drivers/iio/adc/at91_adc.c | 5 +-
drivers/iio/adc/fsl-imx25-gcq.c | 4 +-
drivers/iio/adc/intel_mrfld_adc.c | 6 +-
drivers/iio/adc/max1241.c | 227 +++++
drivers/iio/adc/max1363.c | 32 +-
drivers/iio/adc/sun4i-gpadc-iio.c | 4 +-
drivers/iio/adc/xilinx-xadc-core.c | 4 +-
drivers/iio/adc/xilinx-xadc-events.c | 2 +-
drivers/iio/adc/xilinx-xadc.h | 2 +-
drivers/iio/buffer/industrialio-buffer-dma.c | 1 -
drivers/iio/buffer/industrialio-buffer-dmaengine.c | 41 +-
drivers/iio/buffer/industrialio-hw-consumer.c | 31 -
drivers/iio/buffer/industrialio-triggered-buffer.c | 11 -
drivers/iio/buffer/kfifo_buf.c | 22 -
drivers/iio/chemical/atlas-sensor.c | 7 +-
drivers/iio/chemical/bme680_core.c | 36 +-
drivers/iio/common/st_sensors/st_sensors_core.c | 6 +-
drivers/iio/common/st_sensors/st_sensors_i2c.c | 4 +-
drivers/iio/common/st_sensors/st_sensors_spi.c | 6 +-
drivers/iio/common/st_sensors/st_sensors_trigger.c | 13 +-
drivers/iio/gyro/Kconfig | 2 +-
drivers/iio/gyro/bmg160_i2c.c | 6 +-
drivers/iio/gyro/bmg160_spi.c | 5 +-
drivers/iio/gyro/mpu3050-i2c.c | 4 +-
drivers/iio/gyro/st_gyro_buffer.c | 3 +-
drivers/iio/gyro/st_gyro_core.c | 9 +-
drivers/iio/health/max30100.c | 7 +-
drivers/iio/humidity/hts221_buffer.c | 6 +-
drivers/iio/humidity/hts221_i2c.c | 6 +-
drivers/iio/humidity/hts221_spi.c | 6 +-
drivers/iio/imu/adis.c | 2 +-
drivers/iio/imu/adis16400.c | 19 +-
drivers/iio/imu/adis16460.c | 27 +-
drivers/iio/imu/bmi160/bmi160_i2c.c | 4 +-
drivers/iio/imu/bmi160/bmi160_spi.c | 4 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_acpi.c | 8 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 23 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 4 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c | 4 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 96 ++
drivers/iio/industrialio-buffer.c | 18 +-
drivers/iio/industrialio-core.c | 88 +-
drivers/iio/industrialio-trigger.c | 53 -
drivers/iio/inkern.c | 27 -
drivers/iio/light/isl29125.c | 28 +-
drivers/iio/light/ltr501.c | 2 +-
drivers/iio/light/st_uvis25_i2c.c | 4 +-
drivers/iio/light/st_uvis25_spi.c | 4 +-
drivers/iio/light/tsl2563.c | 2 +-
drivers/iio/light/tsl2772.c | 6 +-
drivers/iio/light/vcnl4000.c | 25 +
drivers/iio/magnetometer/ak8974.c | 7 +-
drivers/iio/magnetometer/bmc150_magn_spi.c | 4 +-
drivers/iio/magnetometer/mmc35240.c | 4 +-
drivers/iio/magnetometer/st_magn_core.c | 3 +-
drivers/iio/pressure/bmp280-core.c | 98 +-
drivers/iio/pressure/st_pressure_core.c | 7 +-
drivers/iio/proximity/Kconfig | 13 +
drivers/iio/proximity/Makefile | 1 +
drivers/iio/proximity/sx9310.c | 1069 ++++++++++++++++++++
drivers/iio/temperature/ltc2983.c | 4 +-
drivers/iio/trigger/iio-trig-hrtimer.c | 2 +-
drivers/staging/iio/Documentation/overview.txt | 2 +-
include/linux/fpga/adi-axi-common.h | 6 +-
include/linux/iio/adc/ad_sigma_delta.h | 58 --
include/linux/iio/adc/adi-axi-adc.h | 64 ++
include/linux/iio/buffer-dma.h | 2 +-
include/linux/iio/buffer-dmaengine.h | 3 +
include/linux/iio/buffer_impl.h | 9 -
include/linux/iio/consumer.h | 18 -
include/linux/iio/hw-consumer.h | 1 -
include/linux/iio/iio.h | 10 +-
include/linux/iio/kfifo_buf.h | 1 -
include/linux/iio/trigger.h | 3 -
include/linux/iio/triggered_buffer.h | 2 -
110 files changed, 3625 insertions(+), 774 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-proximity
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sx9310
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/adi,axi-adc.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max1241.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/adc/rockchip-saradc.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/rockchip-saradc.yaml
create mode 100644 Documentation/devicetree/bindings/iio/common.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/dac/st,stm32-dac.txt
create mode 100644 Documentation/devicetree/bindings/iio/dac/st,stm32-dac.yaml
create mode 100644 Documentation/devicetree/bindings/iio/light/amstaos,tsl2563.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/light/tsl2563.txt
delete mode 100644 Documentation/devicetree/bindings/iio/light/vcnl4000.txt
create mode 100644 Documentation/devicetree/bindings/iio/light/vishay,vcnl4000.yaml
create mode 100644 drivers/iio/adc/ad9467.c
create mode 100644 drivers/iio/adc/adi-axi-adc.c
create mode 100644 drivers/iio/adc/max1241.c
create mode 100644 drivers/iio/proximity/sx9310.c
create mode 100644 include/linux/iio/adc/adi-axi-adc.h
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PULL] First set of IIO new device support, cleanups etc for the 5.8 cycle
2020-04-22 20:31 [PULL] First set of IIO new device support, cleanups etc for the 5.8 cycle Jonathan Cameron
@ 2020-04-23 9:10 ` Greg KH
0 siblings, 0 replies; 2+ messages in thread
From: Greg KH @ 2020-04-23 9:10 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Wed, Apr 22, 2020 at 09:31:45PM +0100, Jonathan Cameron wrote:
> The following changes since commit 825c6f470c62da05195fab57bb6561ccc1bdafcd:
>
> staging: mt7621-pci: be sure gpio descriptor is null on fails (2020-03-20 15:10:51 +0100)
>
> are available in the Git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.8a
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-04-23 9:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-22 20:31 [PULL] First set of IIO new device support, cleanups etc for the 5.8 cycle Jonathan Cameron
2020-04-23 9:10 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.