[PATCH AUTOSEL 4.4 1/8] ALSA: hda: Don't release card at firmware loading error

[PATCH AUTOSEL 4.4 1/8] ALSA: hda: Don't release card at firmware loading error

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 25faa4bd37c10f19e4b848b9032a17a3d44c6f09 ]

At the error path of the firmware loading error, the driver tries to
release the card object and set NULL to drvdata.  This may be referred
badly at the possible PM action, as the driver itself is still bound
and the PM callbacks read the card object.

Instead, we continue the probing as if it were no option set.  This is
often a better choice than the forced abort, too.

Fixes: 5cb543dba986 ("ALSA: hda - Deferred probing with request_firmware_nowait()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 19 +++++--------------
 1 file changed, 5 insertions(+), 14 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 3e3277100f08a..0fa0c33660087 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1839,24 +1839,15 @@ static void azx_firmware_cb(const struct firmware *fw, void *context)
 {
 	struct snd_card *card = context;
 	struct azx *chip = card->private_data;
-	struct pci_dev *pci = chip->pci;
-
-	if (!fw) {
-		dev_err(card->dev, "Cannot load firmware, aborting\n");
-		goto error;
-	}
 
-	chip->fw = fw;
+	if (fw)
+		chip->fw = fw;
+	else
+		dev_err(card->dev, "Cannot load firmware, continue without patching\n");
 	if (!chip->disabled) {
 		/* continue probing */
-		if (azx_probe_continue(chip))
-			goto error;
+		azx_probe_continue(chip);
 	}
-	return; /* OK */
-
- error:
-	snd_card_free(card);
-	pci_set_drvdata(pci, NULL);
 }
 #endif
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 2/8] ALSA: hda: Keep the controller initialization even if no codecs found

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 9479e75fca370a5220784f7596bf598c4dad0b9b ]

Currently, when the HD-audio controller driver doesn't detect any
codecs, it tries to abort the probe.  But this abort happens at the
delayed probe, i.e. the primary probe call already returned success,
hence the driver is never unbound until user does so explicitly.
As a result, it may leave the HD-audio device in the running state
without the runtime PM.  More badly, if the device is a HD-audio bus
that is tied with a GPU, GPU cannot reach to the full power down and
consumes unnecessarily much power.

This patch changes the logic after no-codec situation; it continues
probing without the further codec initialization but keep the
controller driver running normally.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Tested-by: Roy Spliet <nouveau@spliet.org>
Link: https://lore.kernel.org/r/20200413082034.25166-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0fa0c33660087..8bcf67fe84eb5 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1817,7 +1817,7 @@ static int azx_first_init(struct azx *chip)
 	/* codec detection */
 	if (!azx_bus(chip)->codec_mask) {
 		dev_err(card->dev, "no codecs found!\n");
-		return -ENODEV;
+		/* keep running the rest for the runtime PM */
 	}
 
 	if (azx_acquire_irq(chip, 0) < 0)
@@ -2140,9 +2140,11 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 
 	/* create codec instances */
-	err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
-	if (err < 0)
-		goto out_free;
+	if (bus->codec_mask) {
+		err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
+		if (err < 0)
+			goto out_free;
+	}
 
 #ifdef CONFIG_SND_HDA_PATCH_LOADER
 	if (chip->fw) {
@@ -2156,7 +2158,7 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 	}
 #endif
-	if ((probe_only[dev] & 1) == 0) {
+	if (bus->codec_mask && !(probe_only[dev] & 1)) {
 		err = azx_codec_configure(chip);
 		if (err < 0)
 			goto out_free;
-- 
2.20.1

[PATCH AUTOSEL 4.4 2/8] ALSA: hda: Keep the controller initialization even if no codecs found

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 9479e75fca370a5220784f7596bf598c4dad0b9b ]

Currently, when the HD-audio controller driver doesn't detect any
codecs, it tries to abort the probe.  But this abort happens at the
delayed probe, i.e. the primary probe call already returned success,
hence the driver is never unbound until user does so explicitly.
As a result, it may leave the HD-audio device in the running state
without the runtime PM.  More badly, if the device is a HD-audio bus
that is tied with a GPU, GPU cannot reach to the full power down and
consumes unnecessarily much power.

This patch changes the logic after no-codec situation; it continues
probing without the further codec initialization but keep the
controller driver running normally.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Tested-by: Roy Spliet <nouveau@spliet.org>
Link: https://lore.kernel.org/r/20200413082034.25166-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 0fa0c33660087..8bcf67fe84eb5 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1817,7 +1817,7 @@ static int azx_first_init(struct azx *chip)
 	/* codec detection */
 	if (!azx_bus(chip)->codec_mask) {
 		dev_err(card->dev, "no codecs found!\n");
-		return -ENODEV;
+		/* keep running the rest for the runtime PM */
 	}
 
 	if (azx_acquire_irq(chip, 0) < 0)
@@ -2140,9 +2140,11 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 
 	/* create codec instances */
-	err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
-	if (err < 0)
-		goto out_free;
+	if (bus->codec_mask) {
+		err = azx_probe_codecs(chip, azx_max_codecs[chip->driver_type]);
+		if (err < 0)
+			goto out_free;
+	}
 
 #ifdef CONFIG_SND_HDA_PATCH_LOADER
 	if (chip->fw) {
@@ -2156,7 +2158,7 @@ static int azx_probe_continue(struct azx *chip)
 #endif
 	}
 #endif
-	if ((probe_only[dev] & 1) == 0) {
+	if (bus->codec_mask && !(probe_only[dev] & 1)) {
 		err = azx_codec_configure(chip);
 		if (err < 0)
 			goto out_free;
-- 
2.20.1

[PATCH AUTOSEL 4.4 3/8] scsi: target: fix PR IN / READ FULL STATUS for FC

From: Bodo Stroesser <bstroesser@ts.fujitsu.com>

[ Upstream commit 8fed04eb79a74cbf471dfaa755900a51b37273ab ]

Creation of the response to READ FULL STATUS fails for FC based
reservations. Reason is the too high loop limit (< 24) in
fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars
long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is
executed a last time for the ending '\0' of the string and thus hex2bin()
reports an error.

Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.com
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_fabric_lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index 6e75095af6818..2ecb2f7042a13 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -75,7 +75,7 @@ static int fc_get_pr_transport_id(
 	 * encoded TransportID.
 	 */
 	ptr = &se_nacl->initiatorname[0];
-	for (i = 0; i < 24; ) {
+	for (i = 0; i < 23; ) {
 		if (!strncmp(&ptr[i], ":", 1)) {
 			i++;
 			continue;
-- 
2.20.1

[PATCH AUTOSEL 4.4 3/8] scsi: target: fix PR IN / READ FULL STATUS for FC

[Sasha Levin]

From: Bodo Stroesser <bstroesser@ts.fujitsu.com>

[ Upstream commit 8fed04eb79a74cbf471dfaa755900a51b37273ab ]

Creation of the response to READ FULL STATUS fails for FC based
reservations. Reason is the too high loop limit (< 24) in
fc_get_pr_transport_id(). The string representation of FC WWPN is 23 chars
long only ("11:22:33:44:55:66:77:88"). So when i is 23, the loop body is
executed a last time for the ending '\0' of the string and thus hex2bin()
reports an error.

Link: https://lore.kernel.org/r/20200408132610.14623-3-bstroesser@ts.fujitsu.com
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_fabric_lib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index 6e75095af6818..2ecb2f7042a13 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -75,7 +75,7 @@ static int fc_get_pr_transport_id(
 	 * encoded TransportID.
 	 */
 	ptr = &se_nacl->initiatorname[0];
-	for (i = 0; i < 24; ) {
+	for (i = 0; i < 23; ) {
 		if (!strncmp(&ptr[i], ":", 1)) {
 			i++;
 			continue;
-- 
2.20.1

[PATCH AUTOSEL 4.4 4/8] scsi: sg: add sg_remove_request in sg_common_write

[Sasha Levin]

From: Li Bin <huawei.libin@huawei.com>

[ Upstream commit 849f8583e955dbe3a1806e03ecacd5e71cce0a08 ]

If the dxfer_len is greater than 256M then the request is invalid and we
need to call sg_remove_request in sg_common_write.

Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com
Fixes: f930c7043663 ("scsi: sg: only check for dxfer_len greater than 256M")
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sg.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index e1639e80db536..63e21ca538f19 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -820,8 +820,10 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 			"sg_common_write:  scsi opcode=0x%02x, cmd_size=%d\n",
 			(int) cmnd[0], (int) hp->cmd_len));
 
-	if (hp->dxfer_len >= SZ_256M)
+	if (hp->dxfer_len >= SZ_256M) {
+		sg_remove_request(sfp, srp);
 		return -EINVAL;
+	}
 
 	k = sg_start_req(srp, cmnd);
 	if (k) {
-- 
2.20.1

[PATCH AUTOSEL 4.4 5/8] xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status

[Sasha Levin]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 6b51fd3f65a22e3d1471b18a1d56247e246edd46 ]

xenbus_map_ring_valloc() maps a ring page and returns the status of the
used grant (0 meaning success).

There are Xen hypervisors which might return the value 1 for the status
of a failed grant mapping due to a bug. Some callers of
xenbus_map_ring_valloc() test for errors by testing the returned status
to be less than zero, resulting in no error detected and crashing later
due to a not available ring page.

Set the return value of xenbus_map_ring_valloc() to GNTST_general_error
in case the grant status reported by Xen is greater than zero.

This is part of XSA-316.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Link: https://lore.kernel.org/r/20200326080358.1018-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/xenbus/xenbus_client.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c
index 056da6ee1a357..df27cefb2fa35 100644
--- a/drivers/xen/xenbus/xenbus_client.c
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -469,7 +469,14 @@ EXPORT_SYMBOL_GPL(xenbus_free_evtchn);
 int xenbus_map_ring_valloc(struct xenbus_device *dev, grant_ref_t *gnt_refs,
 			   unsigned int nr_grefs, void **vaddr)
 {
-	return ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+	int err;
+
+	err = ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+	/* Some hypervisors are buggy and can return 1. */
+	if (err > 0)
+		err = GNTST_general_error;
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(xenbus_map_ring_valloc);
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 5/8] xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status

[Sasha Levin]

From: Juergen Gross <jgross@suse.com>

[ Upstream commit 6b51fd3f65a22e3d1471b18a1d56247e246edd46 ]

xenbus_map_ring_valloc() maps a ring page and returns the status of the
used grant (0 meaning success).

There are Xen hypervisors which might return the value 1 for the status
of a failed grant mapping due to a bug. Some callers of
xenbus_map_ring_valloc() test for errors by testing the returned status
to be less than zero, resulting in no error detected and crashing later
due to a not available ring page.

Set the return value of xenbus_map_ring_valloc() to GNTST_general_error
in case the grant status reported by Xen is greater than zero.

This is part of XSA-316.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Link: https://lore.kernel.org/r/20200326080358.1018-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/xen/xenbus/xenbus_client.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/xen/xenbus/xenbus_client.c b/drivers/xen/xenbus/xenbus_client.c
index 056da6ee1a357..df27cefb2fa35 100644
--- a/drivers/xen/xenbus/xenbus_client.c
+++ b/drivers/xen/xenbus/xenbus_client.c
@@ -469,7 +469,14 @@ EXPORT_SYMBOL_GPL(xenbus_free_evtchn);
 int xenbus_map_ring_valloc(struct xenbus_device *dev, grant_ref_t *gnt_refs,
 			   unsigned int nr_grefs, void **vaddr)
 {
-	return ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+	int err;
+
+	err = ring_ops->map(dev, gnt_refs, nr_grefs, vaddr);
+	/* Some hypervisors are buggy and can return 1. */
+	if (err > 0)
+		err = GNTST_general_error;
+
+	return err;
 }
 EXPORT_SYMBOL_GPL(xenbus_map_ring_valloc);
 
-- 
2.20.1

[PATCH AUTOSEL 4.4 6/8] net/cxgb4: Check the return from t4_query_params properly

[Sasha Levin]

From: Jason Gunthorpe <jgg@mellanox.com>

[ Upstream commit c799fca8baf18d1bbbbad6c3b736eefbde8bdb90 ]

Positive return values are also failures that don't set val,
although this probably can't happen. Fixes gcc 10 warning:

drivers/net/ethernet/chelsio/cxgb4/t4_hw.c: In function ‘t4_phy_fw_ver’:
drivers/net/ethernet/chelsio/cxgb4/t4_hw.c:3747:14: warning: ‘val’ may be used uninitialized in this function [-Wmaybe-uninitialized]
 3747 |  *phy_fw_ver = val;

Fixes: 01b6961410b7 ("cxgb4: Add PHY firmware support for T420-BT cards")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 832ad1bd1f29b..fd6492fd3dc07 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3341,7 +3341,7 @@ int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver)
 		 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_VERSION));
 	ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
 			      &param, &val);
-	if (ret < 0)
+	if (ret)
 		return ret;
 	*phy_fw_ver = val;
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.4 7/8] ext4: convert BUG_ON's to WARN_ON's in mballoc.c

[Sasha Levin]

From: Theodore Ts'o <tytso@mit.edu>

[ Upstream commit 907ea529fc4c3296701d2bfc8b831dd2a8121a34 ]

If the in-core buddy bitmap gets corrupted (or out of sync with the
block bitmap), issue a WARN_ON and try to recover.  In most cases this
involves skipping trying to allocate out of a particular block group.
We can end up declaring the file system corrupted, which is fair,
since the file system probably should be checked before we proceed any
further.

Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu
Google-Bug-Id: 34811296
Google-Bug-Id: 34639169
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index fda49f4c5a8eb..04fab14e630c1 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -1944,7 +1944,8 @@ void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
 	int free;
 
 	free = e4b->bd_info->bb_free;
-	BUG_ON(free <= 0);
+	if (WARN_ON(free <= 0))
+		return;
 
 	i = e4b->bd_info->bb_first_free;
 
@@ -1965,7 +1966,8 @@ void ext4_mb_complex_scan_group(struct ext4_allocation_context *ac,
 		}
 
 		mb_find_extent(e4b, i, ac->ac_g_ex.fe_len, &ex);
-		BUG_ON(ex.fe_len <= 0);
+		if (WARN_ON(ex.fe_len <= 0))
+			break;
 		if (free < ex.fe_len) {
 			ext4_grp_locked_error(sb, e4b->bd_group, 0, 0,
 					"%d free clusters as per "
-- 
2.20.1

[PATCH AUTOSEL 4.4 8/8] of: unittest: kmemleak on changeset destroy

[Sasha Levin]

From: Frank Rowand <frank.rowand@sony.com>

[ Upstream commit b3fb36ed694b05738d45218ea72cf7feb10ce2b1 ]

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 1 of 5.

of_unittest_changeset() reaches deeply into the dynamic devicetree
functions.  Several nodes were left with an elevated reference
count and thus were not properly cleaned up.  Fix the reference
counts so that the memory will be freed.

Fixes: 201c910bd689 ("of: Transactional DT support.")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/unittest.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index af9e4785b7a6e..1ee2474fa8fbb 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -544,6 +544,10 @@ static void __init of_unittest_changeset(void)
 	mutex_unlock(&of_mutex);
 
 	of_changeset_destroy(&chgset);
+
+	of_node_put(n1);
+	of_node_put(n2);
+	of_node_put(n21);
 #endif
 }
 
-- 
2.20.1