All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wen Gong <wgong@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, wgong@codeaurora.org
Subject: [PATCH v2 0/4] ath10k: sdio: add support for rx/tx bitrate reporting
Date: Mon, 27 Apr 2020 16:04:12 +0800	[thread overview]
Message-ID: <20200427080416.8265-1-wgong@codeaurora.org> (raw)

v2: rebased to ath-next of 04/27

iw wlan0 link/iw wlan0 station dump show the wrong bitrate for rx/tx.
wrong example:
rx bitrate: 6.0 MBit/s
tx bitrate: 2.8 MBit/s

These patches correct them.
rx bitrate: 234.0 MBit/s VHT-MCS 3 80MHz VHT-NSS 2
rx bitrate: 40.5 MBit/s MCS 2 40MHz
rx bitrate: 72.2 MBit/s MCS 7 short GI
rx bitrate: 54.0 MBit/s
rx bitrate: 48.0 MBit/s

tx bitrate: 54.0 MBit/s

Wen Gong (4):
  ath10k: enable firmware peer stats info for wmi tlv
  ath10k: add rx bitrate report for SDIO
  ath10k: add bitrate parse for peer stats info
  ath10k: correct tx bitrate of iw for SDIO

 drivers/net/wireless/ath/ath10k/core.c    |   2 +
 drivers/net/wireless/ath/ath10k/core.h    |  25 +++
 drivers/net/wireless/ath/ath10k/hw.h      |   3 +
 drivers/net/wireless/ath/ath10k/mac.c     | 216 ++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-ops.h |  30 +++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 121 ++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 110 +++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h     |   9 +
 8 files changed, 516 insertions(+)

-- 
2.23.0

WARNING: multiple messages have this Message-ID
From: Wen Gong <wgong@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, wgong@codeaurora.org
Subject: [PATCH v2 0/4] ath10k: sdio: add support for rx/tx bitrate reporting
Date: Mon, 27 Apr 2020 16:04:12 +0800	[thread overview]
Message-ID: <20200427080416.8265-1-wgong@codeaurora.org> (raw)

v2: rebased to ath-next of 04/27

iw wlan0 link/iw wlan0 station dump show the wrong bitrate for rx/tx.
wrong example:
rx bitrate: 6.0 MBit/s
tx bitrate: 2.8 MBit/s

These patches correct them.
rx bitrate: 234.0 MBit/s VHT-MCS 3 80MHz VHT-NSS 2
rx bitrate: 40.5 MBit/s MCS 2 40MHz
rx bitrate: 72.2 MBit/s MCS 7 short GI
rx bitrate: 54.0 MBit/s
rx bitrate: 48.0 MBit/s

tx bitrate: 54.0 MBit/s

Wen Gong (4):
  ath10k: enable firmware peer stats info for wmi tlv
  ath10k: add rx bitrate report for SDIO
  ath10k: add bitrate parse for peer stats info
  ath10k: correct tx bitrate of iw for SDIO

 drivers/net/wireless/ath/ath10k/core.c    |   2 +
 drivers/net/wireless/ath/ath10k/core.h    |  25 +++
 drivers/net/wireless/ath/ath10k/hw.h      |   3 +
 drivers/net/wireless/ath/ath10k/mac.c     | 216 ++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-ops.h |  30 +++
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 121 ++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 110 +++++++++++
 drivers/net/wireless/ath/ath10k/wmi.h     |   9 +
 8 files changed, 516 insertions(+)

-- 
2.23.0

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2020-04-27  8:04 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-27  8:04 Wen Gong [this message]
2020-04-27  8:04 ` [PATCH v2 0/4] ath10k: sdio: add support for rx/tx bitrate reporting Wen Gong
2020-04-27  8:04 ` [PATCH v2 1/4] ath10k: enable firmware peer stats info for wmi tlv Wen Gong
2020-04-27  8:04   ` Wen Gong
2020-04-28  9:13   ` Kalle Valo
2020-04-28  9:33     ` Kalle Valo
2020-04-28  9:33       ` Kalle Valo
2020-04-28  9:49       ` Wen Gong
2020-04-28  9:49         ` Wen Gong
2020-04-28  9:13   ` Kalle Valo
2020-04-27  8:04 ` [PATCH v2 2/4] ath10k: add rx bitrate report for SDIO Wen Gong
2020-04-27  8:04   ` Wen Gong
2020-04-27  8:04 ` [PATCH v2 3/4] ath10k: add bitrate parse for peer stats info Wen Gong
2020-04-27  8:04   ` Wen Gong
2020-04-27  8:04 ` [PATCH v2 4/4] ath10k: correct tx bitrate of iw for SDIO Wen Gong
2020-04-27  8:04   ` Wen Gong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200427080416.8265-1-wgong@codeaurora.org \
    --to=wgong@codeaurora.org \
    --cc=ath10k@lists.infradead.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.