From: "Ricardo Cañuelo" <ricardo.canuelo@collabora.com> To: devicetree@vger.kernel.org Cc: kernel@collabora.com, dri-devel@lists.freedesktop.org, robh+dt@kernel.org, enric.balletbo@collabora.com Subject: [PATCH v3] dt-bindings: display: anx7814.txt: convert to yaml Date: Mon, 27 Apr 2020 12:09:08 +0200 [thread overview] Message-ID: <20200427100908.11809-1-ricardo.canuelo@collabora.com> (raw) This converts the Analogix ANX7814 bridge DT binding to yaml. Port definitions and descriptions were expanded, apart from that it's a direct translation from the original binding. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> --- Changes in v3 (suggested by Sam Ravnborg): - Rename example node i2c0 to i2c. Changes in v2 (suggested by Enric Balletbo): - File name change: use full compatible string. - Binding description removed. - #address-cells and #size-cells properties removed from ports node. - Example node renamed: anx7814 -> bridge. Tested with: make dt_binding_check ARCH=arm64 DT_SCHEMA_FILES=<.../analogix,anx7814.yaml> make dtbs_check ARCH=arm64 DT_SCHEMA_FILES=<.../analogix,anx7814.yaml> .../display/bridge/analogix,anx7814.yaml | 124 ++++++++++++++++++ .../bindings/display/bridge/anx7814.txt | 42 ------ 2 files changed, 124 insertions(+), 42 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml delete mode 100644 Documentation/devicetree/bindings/display/bridge/anx7814.txt diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml new file mode 100644 index 000000000000..13f0b52edefd --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7814 SlimPort (Full-HD Transmitter) + +maintainers: + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +properties: + compatible: + enum: + - analogix,anx7808 + - analogix,anx7812 + - analogix,anx7814 + - analogix,anx7818 + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + description: Should contain the INTP interrupt. + + hpd-gpios: + maxItems: 1 + description: Which GPIO to use for hpd. + + pd-gpios: + maxItems: 1 + description: Which GPIO to use for power down. + + reset-gpios: + maxItems: 1 + description: Which GPIO to use for reset. + + dvdd10-supply: + maxItems: 1 + description: Regulator for 1.0V digital core power. + + ports: + type: object + description: + A node containing input and output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + + properties: + port@0: + type: object + description: Video port for HDMI input. + + properties: + reg: + const: 0 + + port@1: + type: object + description: + Video port for SlimPort, DisplayPort, eDP or MyDP output. + + properties: + reg: + const: 1 + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - hpd-gpios + - pd-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + anx7814: bridge@38 { + compatible = "analogix,anx7814"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ + hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; + pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx7814_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + + port@1 { + reg = <1>; + anx7814_out: endpoint { + remote-endpoint = <&edp_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt deleted file mode 100644 index 17258747fff6..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt +++ /dev/null @@ -1,42 +0,0 @@ -Analogix ANX7814 SlimPort (Full-HD Transmitter) ------------------------------------------------ - -The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter -designed for portable devices. - -Required properties: - - - compatible : Must be one of: - "analogix,anx7808" - "analogix,anx7812" - "analogix,anx7814" - "analogix,anx7818" - - reg : I2C address of the device - - interrupts : Should contain the INTP interrupt - - hpd-gpios : Which GPIO to use for hpd - - pd-gpios : Which GPIO to use for power down - - reset-gpios : Which GPIO to use for reset - -Optional properties: - - - dvdd10-supply : Regulator for 1.0V digital core power. - - Video port for HDMI input, using the DT bindings defined in [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - anx7814: anx7814@38 { - compatible = "analogix,anx7814"; - reg = <0x38>; - interrupt-parent = <&gpio0>; - interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ - hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; - pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; - reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; - port { - anx7814_in: endpoint { - remote-endpoint = <&hdmi0_out>; - }; - }; - }; -- 2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: "Ricardo Cañuelo" <ricardo.canuelo@collabora.com> To: devicetree@vger.kernel.org Cc: enric.balletbo@collabora.com, robh+dt@kernel.org, kernel@collabora.com, dri-devel@lists.freedesktop.org Subject: [PATCH v3] dt-bindings: display: anx7814.txt: convert to yaml Date: Mon, 27 Apr 2020 12:09:08 +0200 [thread overview] Message-ID: <20200427100908.11809-1-ricardo.canuelo@collabora.com> (raw) This converts the Analogix ANX7814 bridge DT binding to yaml. Port definitions and descriptions were expanded, apart from that it's a direct translation from the original binding. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> --- Changes in v3 (suggested by Sam Ravnborg): - Rename example node i2c0 to i2c. Changes in v2 (suggested by Enric Balletbo): - File name change: use full compatible string. - Binding description removed. - #address-cells and #size-cells properties removed from ports node. - Example node renamed: anx7814 -> bridge. Tested with: make dt_binding_check ARCH=arm64 DT_SCHEMA_FILES=<.../analogix,anx7814.yaml> make dtbs_check ARCH=arm64 DT_SCHEMA_FILES=<.../analogix,anx7814.yaml> .../display/bridge/analogix,anx7814.yaml | 124 ++++++++++++++++++ .../bindings/display/bridge/anx7814.txt | 42 ------ 2 files changed, 124 insertions(+), 42 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml delete mode 100644 Documentation/devicetree/bindings/display/bridge/anx7814.txt diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml new file mode 100644 index 000000000000..13f0b52edefd --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/analogix,anx7814.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analogix ANX7814 SlimPort (Full-HD Transmitter) + +maintainers: + - Enric Balletbo i Serra <enric.balletbo@collabora.com> + +properties: + compatible: + enum: + - analogix,anx7808 + - analogix,anx7812 + - analogix,anx7814 + - analogix,anx7818 + + reg: + maxItems: 1 + description: I2C address of the device. + + interrupts: + maxItems: 1 + description: Should contain the INTP interrupt. + + hpd-gpios: + maxItems: 1 + description: Which GPIO to use for hpd. + + pd-gpios: + maxItems: 1 + description: Which GPIO to use for power down. + + reset-gpios: + maxItems: 1 + description: Which GPIO to use for reset. + + dvdd10-supply: + maxItems: 1 + description: Regulator for 1.0V digital core power. + + ports: + type: object + description: + A node containing input and output port nodes with endpoint + definitions as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + Documentation/devicetree/bindings/graph.txt + + properties: + port@0: + type: object + description: Video port for HDMI input. + + properties: + reg: + const: 0 + + port@1: + type: object + description: + Video port for SlimPort, DisplayPort, eDP or MyDP output. + + properties: + reg: + const: 1 + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - interrupts + - hpd-gpios + - pd-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + anx7814: bridge@38 { + compatible = "analogix,anx7814"; + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ + hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; + pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx7814_in: endpoint { + remote-endpoint = <&hdmi0_out>; + }; + }; + + port@1 { + reg = <1>; + anx7814_out: endpoint { + remote-endpoint = <&edp_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt deleted file mode 100644 index 17258747fff6..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt +++ /dev/null @@ -1,42 +0,0 @@ -Analogix ANX7814 SlimPort (Full-HD Transmitter) ------------------------------------------------ - -The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter -designed for portable devices. - -Required properties: - - - compatible : Must be one of: - "analogix,anx7808" - "analogix,anx7812" - "analogix,anx7814" - "analogix,anx7818" - - reg : I2C address of the device - - interrupts : Should contain the INTP interrupt - - hpd-gpios : Which GPIO to use for hpd - - pd-gpios : Which GPIO to use for power down - - reset-gpios : Which GPIO to use for reset - -Optional properties: - - - dvdd10-supply : Regulator for 1.0V digital core power. - - Video port for HDMI input, using the DT bindings defined in [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - - anx7814: anx7814@38 { - compatible = "analogix,anx7814"; - reg = <0x38>; - interrupt-parent = <&gpio0>; - interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */ - hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>; - pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; - reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>; - port { - anx7814_in: endpoint { - remote-endpoint = <&hdmi0_out>; - }; - }; - }; -- 2.18.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2020-04-27 10:09 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-04-27 10:09 Ricardo Cañuelo [this message] 2020-04-27 10:09 ` [PATCH v3] dt-bindings: display: anx7814.txt: convert to yaml Ricardo Cañuelo 2020-04-27 13:52 ` Enric Balletbo i Serra 2020-04-27 13:52 ` Enric Balletbo i Serra 2020-05-11 23:15 ` Rob Herring 2020-05-11 23:15 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200427100908.11809-1-ricardo.canuelo@collabora.com \ --to=ricardo.canuelo@collabora.com \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=enric.balletbo@collabora.com \ --cc=kernel@collabora.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.