All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/3][v2] board: freescale: Remove LS2080A_EMU support
@ 2020-04-28 13:14 Priyanka Jain
  2020-04-28 13:14 ` [PATCH 2/3][v2] board: ls2080a : Add TARGET_LS2080ARDB in Kconfig Priyanka Jain
  2020-04-28 13:14 ` [PATCH 3/3][v2] board: freescale: Remove LS2080A_SIMU support Priyanka Jain
  0 siblings, 2 replies; 3+ messages in thread
From: Priyanka Jain @ 2020-04-28 13:14 UTC (permalink / raw)
  To: u-boot

Remove LS2080A_EMU as it was pre-silicon
board and is no longer Maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
---
Changes for v2:
 Add 2/3 patch in series

 arch/arm/Kconfig                    | 12 -----
 arch/arm/cpu/armv8/Kconfig          |  2 +-
 board/freescale/ls2080a/Kconfig     | 18 -------
 board/freescale/ls2080a/MAINTAINERS |  2 -
 configs/ls2080a_emu_defconfig       | 37 -------------
 drivers/i2c/Kconfig                 |  4 +-
 include/configs/ls2080a_emu.h       | 80 -----------------------------
 7 files changed, 3 insertions(+), 152 deletions(-)
 delete mode 100644 configs/ls2080a_emu_defconfig
 delete mode 100644 include/configs/ls2080a_emu.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1bcf345028..e4b29e92c8 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1134,18 +1134,6 @@ config TARGET_VEXPRESS64_JUNO
 	select ARM64
 	select PL01X_SERIAL
 
-config TARGET_LS2080A_EMU
-	bool "Support ls2080a_emu"
-	select ARCH_LS2080A
-	select ARM64
-	select ARMV8_MULTIENTRY
-	select FSL_DDR_SYNC_REFRESH
-	help
-	  Support for Freescale LS2080A_EMU platform.
-	  The LS2080A Development System (EMULATOR) is a pre-silicon
-	  development platform that supports the QorIQ LS2080A
-	  Layerscape Architecture processor.
-
 config TARGET_LS2080A_SIMU
 	bool "Support ls2080a_simu"
 	select ARCH_LS2080A
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 16c83e8614..006453921e 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -99,7 +99,7 @@ config PSCI_RESET
 	select ARM_SMCCC if OF_CONTROL
 	depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
 		   !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
-		   !TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
+		   !TARGET_LS2080ARDB && \
 		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
 		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
 		   !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
diff --git a/board/freescale/ls2080a/Kconfig b/board/freescale/ls2080a/Kconfig
index b5033511b5..6015b8f930 100644
--- a/board/freescale/ls2080a/Kconfig
+++ b/board/freescale/ls2080a/Kconfig
@@ -1,21 +1,3 @@
-if TARGET_LS2080A_EMU
-
-config SYS_BOARD
-	default "ls2080a"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_SOC
-	default "fsl-layerscape"
-
-config SYS_CONFIG_NAME
-	default "ls2080a_emu"
-
-source "board/freescale/common/Kconfig"
-
-endif
-
 if TARGET_LS2080A_SIMU
 
 config SYS_BOARD
diff --git a/board/freescale/ls2080a/MAINTAINERS b/board/freescale/ls2080a/MAINTAINERS
index e0e4e3f83e..3afaab9c77 100644
--- a/board/freescale/ls2080a/MAINTAINERS
+++ b/board/freescale/ls2080a/MAINTAINERS
@@ -3,7 +3,5 @@ M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 M:	Priyanka Jain <priyanka.jain@nxp.com>
 S:	Maintained
 F:	board/freescale/ls2080a/
-F:	include/configs/ls2080a_emu.h
-F:	configs/ls2080a_emu_defconfig
 F:	include/configs/ls2080a_simu.h
 F:	configs/ls2080a_simu_defconfig
diff --git a/configs/ls2080a_emu_defconfig b/configs/ls2080a_emu_defconfig
deleted file mode 100644
index 7927e3838f..0000000000
--- a/configs/ls2080a_emu_defconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080A_EMU=y
-CONFIG_SYS_TEXT_BASE=0x30100000
-CONFIG_ENV_SIZE=0x1000
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_IDENT_STRING=" LS2080A-EMU"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="EMU"
-CONFIG_BOOTDELAY=10
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
-# CONFIG_USE_BOOTCOMMAND is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_MISC is not set
-CONFIG_MP=y
-# CONFIG_DOS_PARTITION is not set
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_FSL_CAAM=y
-# CONFIG_MMC is not set
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index e42b6516bf..02a74eb136 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -214,7 +214,7 @@ endif
 if SYS_I2C_MXC_I2C1
 config SYS_MXC_I2C1_SPEED
 	int "I2C Channel 1 speed"
-	default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+	default 40000000 if TARGET_LS2080A_SIMU
 	default 100000
 	help
 	 MXC I2C Channel 1 speed
@@ -229,7 +229,7 @@ endif
 if SYS_I2C_MXC_I2C2
 config SYS_MXC_I2C2_SPEED
 	int "I2C Channel 2 speed"
-	default 40000000 if TARGET_LS2080A_SIMU || TARGET_LS2080A_EMU
+	default 40000000 if TARGET_LS2080A_SIMU
 	default 100000
 	help
 	 MXC I2C Channel 2 speed
diff --git a/include/configs/ls2080a_emu.h b/include/configs/ls2080a_emu.h
deleted file mode 100644
index 3e0ad48dda..0000000000
--- a/include/configs/ls2080a_emu.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2014 Freescale Semiconductor
- */
-
-#ifndef __LS2_EMU_H
-#define __LS2_EMU_H
-
-#include "ls2080a_common.h"
-
-#define CONFIG_SYS_CLK_FREQ	100000000
-#define CONFIG_DDR_CLK_FREQ	133333333
-
-#define CONFIG_DDR_SPD
-#define CONFIG_SYS_FSL_DDR_EMU		/* Support emulator */
-#define SPD_EEPROM_ADDRESS1	0x51
-#define SPD_EEPROM_ADDRESS2	0x52
-#define SPD_EEPROM_ADDRESS3	0x53
-#define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1
-#define CONFIG_SYS_SPD_BUS_NUM	1	/* SPD on I2C bus 1 */
-#define CONFIG_DIMM_SLOTS_PER_CTLR		1
-#define CONFIG_CHIP_SELECTS_PER_CTRL		4
-#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
-#endif
-
-#define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
-#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
-/*
- * NOR Flash Timing Params
- */
-#define CONFIG_SYS_NOR0_CSPR					\
-	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)		| \
-	CSPR_PORT_SIZE_16					| \
-	CSPR_MSEL_NOR						| \
-	CSPR_V)
-#define CONFIG_SYS_NOR0_CSPR_EARLY				\
-	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)	| \
-	CSPR_PORT_SIZE_16					| \
-	CSPR_MSEL_NOR						| \
-	CSPR_V)
-#define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(12)
-#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x1) | \
-				FTIM0_NOR_TEADC(0x1) | \
-				FTIM0_NOR_TEAHC(0x1))
-#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x1) | \
-				FTIM1_NOR_TRAD_NOR(0x1))
-#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x0) | \
-				FTIM2_NOR_TCH(0x0) | \
-				FTIM2_NOR_TWP(0x1))
-#define CONFIG_SYS_NOR_FTIM3	0x04000000
-#define CONFIG_SYS_IFC_CCR	0x01000000
-
-#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
-#define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
-
-/* Debug Server firmware */
-#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
-#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580C00000ULL
-
-/*
- * This trick allows users to load MC images into DDR directly without
- * copying from NOR flash. It dramatically improves speed.
- */
-#define CONFIG_SYS_LS_MC_FW_IN_DDR
-#define CONFIG_SYS_LS_MC_DPL_IN_DDR
-#define CONFIG_SYS_LS_MC_DPC_IN_DDR
-
-#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 200000
-
-/* Store environment at top of flash */
-
-#endif /* __LS2_EMU_H */
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 3+ messages in thread
* [PATCH 2/3][v2] board: ls2080a : Add TARGET_LS2080ARDB in Kconfig
  2020-04-28 13:14 [PATCH 1/3][v2] board: freescale: Remove LS2080A_EMU support Priyanka Jain
@ 2020-04-28 13:14 ` Priyanka Jain
  2020-04-28 13:14 ` [PATCH 3/3][v2] board: freescale: Remove LS2080A_SIMU support Priyanka Jain
  1 sibling, 0 replies; 3+ messages in thread
From: Priyanka Jain @ 2020-04-28 13:14 UTC (permalink / raw)
  To: u-boot

Add config TARGET_LS2080ARDB in Kconfig

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
---
Changes for v2:
 Add 2/3 patch in series

 board/freescale/ls2080a/Kconfig | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/board/freescale/ls2080a/Kconfig b/board/freescale/ls2080a/Kconfig
index 6015b8f930..f85c547b61 100644
--- a/board/freescale/ls2080a/Kconfig
+++ b/board/freescale/ls2080a/Kconfig
@@ -1,3 +1,21 @@
+if TARGET_LS2080ARDB
+
+config SYS_BOARD
+	default "ls2080a"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls2080ardb"
+
+source "board/freescale/common/Kconfig"
+
+endif
+
 if TARGET_LS2080A_SIMU
 
 config SYS_BOARD
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 3+ messages in thread
* [PATCH 3/3][v2] board: freescale: Remove LS2080A_SIMU support
  2020-04-28 13:14 [PATCH 1/3][v2] board: freescale: Remove LS2080A_EMU support Priyanka Jain
  2020-04-28 13:14 ` [PATCH 2/3][v2] board: ls2080a : Add TARGET_LS2080ARDB in Kconfig Priyanka Jain
@ 2020-04-28 13:14 ` Priyanka Jain
  1 sibling, 0 replies; 3+ messages in thread
From: Priyanka Jain @ 2020-04-28 13:14 UTC (permalink / raw)
  To: u-boot

Remove LS2080A_SIMU as it was pre-silicon
board and is no longer Maintained.

Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
---
Changes for v2:
 Add 2/3 patch in series

 arch/arm/Kconfig                    |  12 ---
 arch/arm/cpu/armv8/Kconfig          |   2 +-
 board/freescale/ls2080a/Kconfig     |  17 ----
 board/freescale/ls2080a/MAINTAINERS |   2 -
 configs/ls2080a_simu_defconfig      |  45 ---------
 drivers/i2c/Kconfig                 |   2 -
 include/configs/ls2080a_simu.h      | 147 ----------------------------
 7 files changed, 1 insertion(+), 226 deletions(-)
 delete mode 100644 configs/ls2080a_simu_defconfig
 delete mode 100644 include/configs/ls2080a_simu.h

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e4b29e92c8..108c22b597 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1134,18 +1134,6 @@ config TARGET_VEXPRESS64_JUNO
 	select ARM64
 	select PL01X_SERIAL
 
-config TARGET_LS2080A_SIMU
-	bool "Support ls2080a_simu"
-	select ARCH_LS2080A
-	select ARM64
-	select ARMV8_MULTIENTRY
-	select BOARD_LATE_INIT
-	help
-	  Support for Freescale LS2080A_SIMU platform.
-	  The LS2080A Development System (QDS) is a pre silicon
-	  development platform that supports the QorIQ LS2080A
-	  Layerscape Architecture processor.
-
 config TARGET_LS1088AQDS
 	bool "Support ls1088aqds"
 	select ARCH_LS1088A
diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig
index 006453921e..bbed71be43 100644
--- a/arch/arm/cpu/armv8/Kconfig
+++ b/arch/arm/cpu/armv8/Kconfig
@@ -98,7 +98,7 @@ config PSCI_RESET
 	default y
 	select ARM_SMCCC if OF_CONTROL
 	depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
-		   !TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
+		   !TARGET_LS2080AQDS && \
 		   !TARGET_LS2080ARDB && \
 		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
 		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
diff --git a/board/freescale/ls2080a/Kconfig b/board/freescale/ls2080a/Kconfig
index f85c547b61..b756548179 100644
--- a/board/freescale/ls2080a/Kconfig
+++ b/board/freescale/ls2080a/Kconfig
@@ -16,20 +16,3 @@ source "board/freescale/common/Kconfig"
 
 endif
 
-if TARGET_LS2080A_SIMU
-
-config SYS_BOARD
-	default "ls2080a"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_SOC
-	default "fsl-layerscape"
-
-config SYS_CONFIG_NAME
-	default "ls2080a_simu"
-
-source "board/freescale/common/Kconfig"
-
-endif
diff --git a/board/freescale/ls2080a/MAINTAINERS b/board/freescale/ls2080a/MAINTAINERS
index 3afaab9c77..b228f4dd59 100644
--- a/board/freescale/ls2080a/MAINTAINERS
+++ b/board/freescale/ls2080a/MAINTAINERS
@@ -3,5 +3,3 @@ M:	Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
 M:	Priyanka Jain <priyanka.jain@nxp.com>
 S:	Maintained
 F:	board/freescale/ls2080a/
-F:	include/configs/ls2080a_simu.h
-F:	configs/ls2080a_simu_defconfig
diff --git a/configs/ls2080a_simu_defconfig b/configs/ls2080a_simu_defconfig
deleted file mode 100644
index ccf71179e0..0000000000
--- a/configs/ls2080a_simu_defconfig
+++ /dev/null
@@ -1,45 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_LS2080A_SIMU=y
-CONFIG_SYS_TEXT_BASE=0x30100000
-CONFIG_ENV_SIZE=0x1000
-CONFIG_NR_DRAM_BANKS=3
-CONFIG_IDENT_STRING=" LS2080A-SIMU"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SIMU"
-CONFIG_BOOTDELAY=10
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
-# CONFIG_USE_BOOTCOMMAND is not set
-# CONFIG_DISPLAY_BOARDINFO is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-# CONFIG_CMD_MISC is not set
-CONFIG_MP=y
-# CONFIG_ISO_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_OF_LIBFDT=y
-CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 02a74eb136..b981d47e67 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -214,7 +214,6 @@ endif
 if SYS_I2C_MXC_I2C1
 config SYS_MXC_I2C1_SPEED
 	int "I2C Channel 1 speed"
-	default 40000000 if TARGET_LS2080A_SIMU
 	default 100000
 	help
 	 MXC I2C Channel 1 speed
@@ -229,7 +228,6 @@ endif
 if SYS_I2C_MXC_I2C2
 config SYS_MXC_I2C2_SPEED
 	int "I2C Channel 2 speed"
-	default 40000000 if TARGET_LS2080A_SIMU
 	default 100000
 	help
 	 MXC I2C Channel 2 speed
diff --git a/include/configs/ls2080a_simu.h b/include/configs/ls2080a_simu.h
deleted file mode 100644
index ab46df7600..0000000000
--- a/include/configs/ls2080a_simu.h
+++ /dev/null
@@ -1,147 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2014 Freescale Semiconductor
- */
-
-#ifndef __LS2_SIMU_H
-#define __LS2_SIMU_H
-
-#include "ls2080a_common.h"
-
-#define CONFIG_SYS_CLK_FREQ	100000000
-#define CONFIG_DDR_CLK_FREQ	133333333
-
-#define CONFIG_DIMM_SLOTS_PER_CTLR		1
-#define CONFIG_CHIP_SELECTS_PER_CTRL		4
-#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
-#define CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR	1
-#endif
-
-/* SMSC 91C111 ethernet configuration */
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE	(0x2210000)
-
-#define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
-#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
-
-#ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_SYS_FLASH_QUIET_TEST
-#endif
-
-/*
- * NOR Flash Timing Params
- */
-#define CONFIG_SYS_NOR0_CSPR					\
-	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)		| \
-	CSPR_PORT_SIZE_16					| \
-	CSPR_MSEL_NOR						| \
-	CSPR_V)
-#define CONFIG_SYS_NOR0_CSPR_EARLY				\
-	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)	| \
-	CSPR_PORT_SIZE_16					| \
-	CSPR_MSEL_NOR						| \
-	CSPR_V)
-#define CONFIG_SYS_NOR_CSOR	CSOR_NOR_ADM_SHIFT(12)
-#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x1) | \
-				FTIM0_NOR_TEADC(0x1) | \
-				FTIM0_NOR_TEAHC(0x1))
-#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x1) | \
-				FTIM1_NOR_TRAD_NOR(0x1))
-#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x0) | \
-				FTIM2_NOR_TCH(0x0) | \
-				FTIM2_NOR_TWP(0x1))
-#define CONFIG_SYS_NOR_FTIM3	0x04000000
-#define CONFIG_SYS_IFC_CCR	0x01000000
-
-#ifdef CONFIG_MTD_NOR_FLASH
-#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
-#endif
-
-#define CONFIG_NAND_FSL_IFC
-#define CONFIG_SYS_NAND_MAX_ECCPOS	256
-#define CONFIG_SYS_NAND_MAX_OOBFREE	2
-
-#define CONFIG_SYS_NAND_CSPR_EXT	(0x0)
-#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
-				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
-				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
-				| CSPR_V)
-#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64 * 1024)
-
-#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
-				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
-				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
-				| CSOR_NAND_RAL_3	/* RAL = 2Byes */ \
-				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
-				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
-				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
-
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-/* ONFI NAND Flash mode0 Timing Params */
-#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
-					FTIM0_NAND_TWP(0x18)   | \
-					FTIM0_NAND_TWCHT(0x07) | \
-					FTIM0_NAND_TWH(0x0a))
-#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
-					FTIM1_NAND_TWBE(0x39)  | \
-					FTIM1_NAND_TRR(0x0e)   | \
-					FTIM1_NAND_TRP(0x18))
-#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
-					FTIM2_NAND_TREH(0x0a) | \
-					FTIM2_NAND_TWHRE(0x1e))
-#define CONFIG_SYS_NAND_FTIM3		0x0
-
-#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_MTD_NAND_VERIFY_WRITE
-
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
-
-#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
-#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
-#define CONFIG_SYS_CSPR0_FINAL		CONFIG_SYS_NOR0_CSPR
-#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
-#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
-#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
-#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
-#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
-#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
-#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NAND_CSPR_EXT
-#define CONFIG_SYS_CSPR1		CONFIG_SYS_NAND_CSPR
-#define CONFIG_SYS_AMASK1		CONFIG_SYS_NAND_AMASK
-#define CONFIG_SYS_CSOR1		CONFIG_SYS_NAND_CSOR
-#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NAND_FTIM0
-#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NAND_FTIM1
-#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NAND_FTIM2
-#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NAND_FTIM3
-
-/*  MMC  */
-#ifdef CONFIG_MMC
-#define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
-#endif
-
-/* Debug Server firmware */
-#define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR
-#define CONFIG_SYS_DEBUG_SERVER_FW_ADDR	0x580C00000ULL
-
-/* MC firmware */
-#define CONFIG_SYS_LS_MC_DPL_IN_NOR
-#define CONFIG_SYS_LS_MC_DPL_ADDR	0x5806C0000ULL
-
-#define CONFIG_SYS_LS_MC_DPC_IN_NOR
-#define CONFIG_SYS_LS_MC_DPC_ADDR	0x5806F8000ULL
-
-#define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 200000
-
-/* Store environment at top of flash */
-
-#endif /* __LS2_SIMU_H */
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2020-04-28 13:14 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-28 13:14 [PATCH 1/3][v2] board: freescale: Remove LS2080A_EMU support Priyanka Jain
2020-04-28 13:14 ` [PATCH 2/3][v2] board: ls2080a : Add TARGET_LS2080ARDB in Kconfig Priyanka Jain
2020-04-28 13:14 ` [PATCH 3/3][v2] board: freescale: Remove LS2080A_SIMU support Priyanka Jain

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.