[PATCH AUTOSEL 5.6 01/79] ARM: dts: OMAP3: disable RNG on N950/N9

[PATCH AUTOSEL 5.6 01/79] ARM: dts: OMAP3: disable RNG on N950/N9

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@iki.fi>

[ Upstream commit 07bdc492cff6f555538df95e9812fe72e16d154a ]

Like on N900, we cannot access RNG directly on N950/N9. Mark it disabled in
the DTS to allow kernel to boot.

Fixes: 308607e5545f ("ARM: dts: Configure omap3 rng")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-n950-n9.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index a075b63f3087d..11d41e86f814d 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -341,6 +341,11 @@
 	status = "disabled";
 };
 
+/* RNG not directly accessible on N950/N9. */
+&rng_target {
+	status = "disabled";
+};
+
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
-- 
2.20.1

[PATCH AUTOSEL 5.6 01/79] ARM: dts: OMAP3: disable RNG on N950/N9

[Sasha Levin]

From: Aaro Koskinen <aaro.koskinen@iki.fi>

[ Upstream commit 07bdc492cff6f555538df95e9812fe72e16d154a ]

Like on N900, we cannot access RNG directly on N950/N9. Mark it disabled in
the DTS to allow kernel to boot.

Fixes: 308607e5545f ("ARM: dts: Configure omap3 rng")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-n950-n9.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index a075b63f3087d..11d41e86f814d 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -341,6 +341,11 @@
 	status = "disabled";
 };
 
+/* RNG not directly accessible on N950/N9. */
+&rng_target {
+	status = "disabled";
+};
+
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 02/79] drm/bridge: analogix_dp: Split bind() into probe() and real bind()

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 83a196773b8bc6702f49df1eddc848180e350340 ]

Analogix_dp driver acquires all its resources in the ->bind() callback,
what is a bit against the component driver based approach, where the
driver initialization is split into a probe(), where all resources are
gathered, and a bind(), where all objects are created and a compound
driver is initialized.

Extract all the resource related operations to analogix_dp_probe() and
analogix_dp_remove(), then call them before/after registration of the
device components from the main Exynos DP and Rockchip DP drivers. Also
move the plat_data initialization to the probe() to make it available for
the analogix_dp_probe() function.

This fixes the multiple calls to the bind() of the DRM compound driver
when the DP PHY driver is not yet loaded/probed:

[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm])
exynos-dp 145b0000.dp-controller: no DP phy configured
exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517
exynos-drm exynos-drm: master bind failed: -517
...
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Console: switching to colour frame buffer device 170x48
exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
...

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310103427.26048-1-m.szyprowski@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 33 +++++++++++------
 drivers/gpu/drm/exynos/exynos_dp.c            | 29 ++++++++-------
 .../gpu/drm/rockchip/analogix_dp-rockchip.c   | 36 ++++++++++---------
 include/drm/bridge/analogix_dp.h              |  5 +--
 4 files changed, 61 insertions(+), 42 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 6effe532f8200..461eff94d2767 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1636,8 +1636,7 @@ static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux,
 }
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data)
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct analogix_dp_device *dp;
@@ -1740,22 +1739,30 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 					irq_flags, "analogix-dp", dp);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to request irq\n");
-		goto err_disable_pm_runtime;
+		return ERR_PTR(ret);
 	}
 	disable_irq(dp->irq);
 
+	return dp;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_probe);
+
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
+{
+	int ret;
+
 	dp->drm_dev = drm_dev;
 	dp->encoder = dp->plat_data->encoder;
 
 	dp->aux.name = "DP-AUX";
 	dp->aux.transfer = analogix_dpaux_transfer;
-	dp->aux.dev = &pdev->dev;
+	dp->aux.dev = dp->dev;
 
 	ret = drm_dp_aux_register(&dp->aux);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
-	pm_runtime_enable(dev);
+	pm_runtime_enable(dp->dev);
 
 	ret = analogix_dp_create_bridge(drm_dev, dp);
 	if (ret) {
@@ -1763,13 +1770,12 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 		goto err_disable_pm_runtime;
 	}
 
-	return dp;
+	return 0;
 
 err_disable_pm_runtime:
+	pm_runtime_disable(dp->dev);
 
-	pm_runtime_disable(dev);
-
-	return ERR_PTR(ret);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(analogix_dp_bind);
 
@@ -1786,10 +1792,15 @@ void analogix_dp_unbind(struct analogix_dp_device *dp)
 
 	drm_dp_aux_unregister(&dp->aux);
 	pm_runtime_disable(dp->dev);
-	clk_disable_unprepare(dp->clock);
 }
 EXPORT_SYMBOL_GPL(analogix_dp_unbind);
 
+void analogix_dp_remove(struct analogix_dp_device *dp)
+{
+	clk_disable_unprepare(dp->clock);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_remove);
+
 #ifdef CONFIG_PM
 int analogix_dp_suspend(struct analogix_dp_device *dp)
 {
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 4785885c0f4f9..065a1cb2a5444 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -158,15 +158,8 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp->dev = dev;
 	dp->drm_dev = drm_dev;
 
-	dp->plat_data.dev_type = EXYNOS_DP;
-	dp->plat_data.power_on_start = exynos_dp_poweron;
-	dp->plat_data.power_off = exynos_dp_poweroff;
-	dp->plat_data.attach = exynos_dp_bridge_attach;
-	dp->plat_data.get_modes = exynos_dp_get_modes;
-
 	if (!dp->plat_data.panel && !dp->ptn_bridge) {
 		ret = exynos_dp_dt_parse_panel(dp);
 		if (ret)
@@ -184,13 +177,11 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 
 	dp->plat_data.encoder = encoder;
 
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
+	ret = analogix_dp_bind(dp->adp, dp->drm_dev);
+	if (ret)
 		dp->encoder.funcs->destroy(&dp->encoder);
-		return PTR_ERR(dp->adp);
-	}
 
-	return 0;
+	return ret;
 }
 
 static void exynos_dp_unbind(struct device *dev, struct device *master,
@@ -221,6 +212,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	if (!dp)
 		return -ENOMEM;
 
+	dp->dev = dev;
 	/*
 	 * We just use the drvdata until driver run into component
 	 * add function, and then we would set drvdata to null, so
@@ -246,16 +238,29 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	/* The remote port can be either a panel or a bridge */
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = EXYNOS_DP;
+	dp->plat_data.power_on_start = exynos_dp_poweron;
+	dp->plat_data.power_off = exynos_dp_poweroff;
+	dp->plat_data.attach = exynos_dp_bridge_attach;
+	dp->plat_data.get_modes = exynos_dp_get_modes;
 	dp->plat_data.skip_connector = !!bridge;
+
 	dp->ptn_bridge = bridge;
 
 out:
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(&pdev->dev, &exynos_dp_ops);
 }
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
+	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &exynos_dp_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index f38f5e113c6b3..ce98c08aa8b44 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -325,15 +325,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 			    void *data)
 {
 	struct rockchip_dp_device *dp = dev_get_drvdata(dev);
-	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp_data = of_device_get_match_data(dev);
-	if (!dp_data)
-		return -ENODEV;
-
-	dp->data = dp_data;
 	dp->drm_dev = drm_dev;
 
 	ret = rockchip_dp_drm_create_encoder(dp);
@@ -344,16 +338,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 
 	dp->plat_data.encoder = &dp->encoder;
 
-	dp->plat_data.dev_type = dp->data->chip_type;
-	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
-	dp->plat_data.power_off = rockchip_dp_powerdown;
-	dp->plat_data.get_modes = rockchip_dp_get_modes;
-
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
-		ret = PTR_ERR(dp->adp);
+	ret = analogix_dp_bind(dp->adp, drm_dev);
+	if (ret)
 		goto err_cleanup_encoder;
-	}
 
 	return 0;
 err_cleanup_encoder:
@@ -368,8 +355,6 @@ static void rockchip_dp_unbind(struct device *dev, struct device *master,
 
 	analogix_dp_unbind(dp->adp);
 	dp->encoder.funcs->destroy(&dp->encoder);
-
-	dp->adp = ERR_PTR(-ENODEV);
 }
 
 static const struct component_ops rockchip_dp_component_ops = {
@@ -380,10 +365,15 @@ static const struct component_ops rockchip_dp_component_ops = {
 static int rockchip_dp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_panel *panel = NULL;
 	struct rockchip_dp_device *dp;
 	int ret;
 
+	dp_data = of_device_get_match_data(dev);
+	if (!dp_data)
+		return -ENODEV;
+
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
 	if (ret < 0)
 		return ret;
@@ -394,7 +384,12 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	dp->dev = dev;
 	dp->adp = ERR_PTR(-ENODEV);
+	dp->data = dp_data;
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = dp->data->chip_type;
+	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
+	dp->plat_data.power_off = rockchip_dp_powerdown;
+	dp->plat_data.get_modes = rockchip_dp_get_modes;
 
 	ret = rockchip_dp_of_probe(dp);
 	if (ret < 0)
@@ -402,12 +397,19 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dp);
 
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(dev, &rockchip_dp_component_ops);
 }
 
 static int rockchip_dp_remove(struct platform_device *pdev)
 {
+	struct rockchip_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &rockchip_dp_component_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 7aa2f93da49ca..b0dcc07334a1e 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -42,9 +42,10 @@ int analogix_dp_resume(struct analogix_dp_device *dp);
 int analogix_dp_suspend(struct analogix_dp_device *dp);
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data);
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data);
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev);
 void analogix_dp_unbind(struct analogix_dp_device *dp);
+void analogix_dp_remove(struct analogix_dp_device *dp);
 
 int analogix_dp_start_crc(struct drm_connector *connector);
 int analogix_dp_stop_crc(struct drm_connector *connector);
-- 
2.20.1

[PATCH AUTOSEL 5.6 02/79] drm/bridge: analogix_dp: Split bind() into probe() and real bind()

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 83a196773b8bc6702f49df1eddc848180e350340 ]

Analogix_dp driver acquires all its resources in the ->bind() callback,
what is a bit against the component driver based approach, where the
driver initialization is split into a probe(), where all resources are
gathered, and a bind(), where all objects are created and a compound
driver is initialized.

Extract all the resource related operations to analogix_dp_probe() and
analogix_dp_remove(), then call them before/after registration of the
device components from the main Exynos DP and Rockchip DP drivers. Also
move the plat_data initialization to the probe() to make it available for
the analogix_dp_probe() function.

This fixes the multiple calls to the bind() of the DRM compound driver
when the DP PHY driver is not yet loaded/probed:

[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm])
exynos-dp 145b0000.dp-controller: no DP phy configured
exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517
exynos-drm exynos-drm: master bind failed: -517
...
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Console: switching to colour frame buffer device 170x48
exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
...

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310103427.26048-1-m.szyprowski@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 33 +++++++++++------
 drivers/gpu/drm/exynos/exynos_dp.c            | 29 ++++++++-------
 .../gpu/drm/rockchip/analogix_dp-rockchip.c   | 36 ++++++++++---------
 include/drm/bridge/analogix_dp.h              |  5 +--
 4 files changed, 61 insertions(+), 42 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 6effe532f8200..461eff94d2767 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1636,8 +1636,7 @@ static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux,
 }
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data)
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct analogix_dp_device *dp;
@@ -1740,22 +1739,30 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 					irq_flags, "analogix-dp", dp);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to request irq\n");
-		goto err_disable_pm_runtime;
+		return ERR_PTR(ret);
 	}
 	disable_irq(dp->irq);
 
+	return dp;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_probe);
+
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
+{
+	int ret;
+
 	dp->drm_dev = drm_dev;
 	dp->encoder = dp->plat_data->encoder;
 
 	dp->aux.name = "DP-AUX";
 	dp->aux.transfer = analogix_dpaux_transfer;
-	dp->aux.dev = &pdev->dev;
+	dp->aux.dev = dp->dev;
 
 	ret = drm_dp_aux_register(&dp->aux);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
-	pm_runtime_enable(dev);
+	pm_runtime_enable(dp->dev);
 
 	ret = analogix_dp_create_bridge(drm_dev, dp);
 	if (ret) {
@@ -1763,13 +1770,12 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 		goto err_disable_pm_runtime;
 	}
 
-	return dp;
+	return 0;
 
 err_disable_pm_runtime:
+	pm_runtime_disable(dp->dev);
 
-	pm_runtime_disable(dev);
-
-	return ERR_PTR(ret);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(analogix_dp_bind);
 
@@ -1786,10 +1792,15 @@ void analogix_dp_unbind(struct analogix_dp_device *dp)
 
 	drm_dp_aux_unregister(&dp->aux);
 	pm_runtime_disable(dp->dev);
-	clk_disable_unprepare(dp->clock);
 }
 EXPORT_SYMBOL_GPL(analogix_dp_unbind);
 
+void analogix_dp_remove(struct analogix_dp_device *dp)
+{
+	clk_disable_unprepare(dp->clock);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_remove);
+
 #ifdef CONFIG_PM
 int analogix_dp_suspend(struct analogix_dp_device *dp)
 {
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 4785885c0f4f9..065a1cb2a5444 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -158,15 +158,8 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp->dev = dev;
 	dp->drm_dev = drm_dev;
 
-	dp->plat_data.dev_type = EXYNOS_DP;
-	dp->plat_data.power_on_start = exynos_dp_poweron;
-	dp->plat_data.power_off = exynos_dp_poweroff;
-	dp->plat_data.attach = exynos_dp_bridge_attach;
-	dp->plat_data.get_modes = exynos_dp_get_modes;
-
 	if (!dp->plat_data.panel && !dp->ptn_bridge) {
 		ret = exynos_dp_dt_parse_panel(dp);
 		if (ret)
@@ -184,13 +177,11 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 
 	dp->plat_data.encoder = encoder;
 
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
+	ret = analogix_dp_bind(dp->adp, dp->drm_dev);
+	if (ret)
 		dp->encoder.funcs->destroy(&dp->encoder);
-		return PTR_ERR(dp->adp);
-	}
 
-	return 0;
+	return ret;
 }
 
 static void exynos_dp_unbind(struct device *dev, struct device *master,
@@ -221,6 +212,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	if (!dp)
 		return -ENOMEM;
 
+	dp->dev = dev;
 	/*
 	 * We just use the drvdata until driver run into component
 	 * add function, and then we would set drvdata to null, so
@@ -246,16 +238,29 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	/* The remote port can be either a panel or a bridge */
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = EXYNOS_DP;
+	dp->plat_data.power_on_start = exynos_dp_poweron;
+	dp->plat_data.power_off = exynos_dp_poweroff;
+	dp->plat_data.attach = exynos_dp_bridge_attach;
+	dp->plat_data.get_modes = exynos_dp_get_modes;
 	dp->plat_data.skip_connector = !!bridge;
+
 	dp->ptn_bridge = bridge;
 
 out:
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(&pdev->dev, &exynos_dp_ops);
 }
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
+	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &exynos_dp_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index f38f5e113c6b3..ce98c08aa8b44 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -325,15 +325,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 			    void *data)
 {
 	struct rockchip_dp_device *dp = dev_get_drvdata(dev);
-	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp_data = of_device_get_match_data(dev);
-	if (!dp_data)
-		return -ENODEV;
-
-	dp->data = dp_data;
 	dp->drm_dev = drm_dev;
 
 	ret = rockchip_dp_drm_create_encoder(dp);
@@ -344,16 +338,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 
 	dp->plat_data.encoder = &dp->encoder;
 
-	dp->plat_data.dev_type = dp->data->chip_type;
-	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
-	dp->plat_data.power_off = rockchip_dp_powerdown;
-	dp->plat_data.get_modes = rockchip_dp_get_modes;
-
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
-		ret = PTR_ERR(dp->adp);
+	ret = analogix_dp_bind(dp->adp, drm_dev);
+	if (ret)
 		goto err_cleanup_encoder;
-	}
 
 	return 0;
 err_cleanup_encoder:
@@ -368,8 +355,6 @@ static void rockchip_dp_unbind(struct device *dev, struct device *master,
 
 	analogix_dp_unbind(dp->adp);
 	dp->encoder.funcs->destroy(&dp->encoder);
-
-	dp->adp = ERR_PTR(-ENODEV);
 }
 
 static const struct component_ops rockchip_dp_component_ops = {
@@ -380,10 +365,15 @@ static const struct component_ops rockchip_dp_component_ops = {
 static int rockchip_dp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_panel *panel = NULL;
 	struct rockchip_dp_device *dp;
 	int ret;
 
+	dp_data = of_device_get_match_data(dev);
+	if (!dp_data)
+		return -ENODEV;
+
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
 	if (ret < 0)
 		return ret;
@@ -394,7 +384,12 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	dp->dev = dev;
 	dp->adp = ERR_PTR(-ENODEV);
+	dp->data = dp_data;
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = dp->data->chip_type;
+	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
+	dp->plat_data.power_off = rockchip_dp_powerdown;
+	dp->plat_data.get_modes = rockchip_dp_get_modes;
 
 	ret = rockchip_dp_of_probe(dp);
 	if (ret < 0)
@@ -402,12 +397,19 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dp);
 
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(dev, &rockchip_dp_component_ops);
 }
 
 static int rockchip_dp_remove(struct platform_device *pdev)
 {
+	struct rockchip_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &rockchip_dp_component_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 7aa2f93da49ca..b0dcc07334a1e 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -42,9 +42,10 @@ int analogix_dp_resume(struct analogix_dp_device *dp);
 int analogix_dp_suspend(struct analogix_dp_device *dp);
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data);
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data);
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev);
 void analogix_dp_unbind(struct analogix_dp_device *dp);
+void analogix_dp_remove(struct analogix_dp_device *dp);
 
 int analogix_dp_start_crc(struct drm_connector *connector);
 int analogix_dp_stop_crc(struct drm_connector *connector);
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 02/79] drm/bridge: analogix_dp: Split bind() into probe() and real bind()

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 83a196773b8bc6702f49df1eddc848180e350340 ]

Analogix_dp driver acquires all its resources in the ->bind() callback,
what is a bit against the component driver based approach, where the
driver initialization is split into a probe(), where all resources are
gathered, and a bind(), where all objects are created and a compound
driver is initialized.

Extract all the resource related operations to analogix_dp_probe() and
analogix_dp_remove(), then call them before/after registration of the
device components from the main Exynos DP and Rockchip DP drivers. Also
move the plat_data initialization to the probe() to make it available for
the analogix_dp_probe() function.

This fixes the multiple calls to the bind() of the DRM compound driver
when the DP PHY driver is not yet loaded/probed:

[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops [exynosdrm])
exynos-dp 145b0000.dp-controller: no DP phy configured
exynos-drm exynos-drm: failed to bind 145b0000.dp-controller (ops exynos_dp_ops [exynosdrm]): -517
exynos-drm exynos-drm: master bind failed: -517
...
[drm] Exynos DRM: using 14400000.fimd device for DMA mapping operations
exynos-drm exynos-drm: bound 14400000.fimd (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14450000.mixer (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 145b0000.dp-controller (ops hdmi_enable [exynosdrm])
exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_enable [exynosdrm])
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
Console: switching to colour frame buffer device 170x48
exynos-drm exynos-drm: fb0: exynosdrmfb frame buffer device
[drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 1
...

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200310103427.26048-1-m.szyprowski@samsung.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/bridge/analogix/analogix_dp_core.c    | 33 +++++++++++------
 drivers/gpu/drm/exynos/exynos_dp.c            | 29 ++++++++-------
 .../gpu/drm/rockchip/analogix_dp-rockchip.c   | 36 ++++++++++---------
 include/drm/bridge/analogix_dp.h              |  5 +--
 4 files changed, 61 insertions(+), 42 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 6effe532f8200..461eff94d2767 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1636,8 +1636,7 @@ static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux,
 }
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data)
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data)
 {
 	struct platform_device *pdev = to_platform_device(dev);
 	struct analogix_dp_device *dp;
@@ -1740,22 +1739,30 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 					irq_flags, "analogix-dp", dp);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to request irq\n");
-		goto err_disable_pm_runtime;
+		return ERR_PTR(ret);
 	}
 	disable_irq(dp->irq);
 
+	return dp;
+}
+EXPORT_SYMBOL_GPL(analogix_dp_probe);
+
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
+{
+	int ret;
+
 	dp->drm_dev = drm_dev;
 	dp->encoder = dp->plat_data->encoder;
 
 	dp->aux.name = "DP-AUX";
 	dp->aux.transfer = analogix_dpaux_transfer;
-	dp->aux.dev = &pdev->dev;
+	dp->aux.dev = dp->dev;
 
 	ret = drm_dp_aux_register(&dp->aux);
 	if (ret)
-		return ERR_PTR(ret);
+		return ret;
 
-	pm_runtime_enable(dev);
+	pm_runtime_enable(dp->dev);
 
 	ret = analogix_dp_create_bridge(drm_dev, dp);
 	if (ret) {
@@ -1763,13 +1770,12 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 		goto err_disable_pm_runtime;
 	}
 
-	return dp;
+	return 0;
 
 err_disable_pm_runtime:
+	pm_runtime_disable(dp->dev);
 
-	pm_runtime_disable(dev);
-
-	return ERR_PTR(ret);
+	return ret;
 }
 EXPORT_SYMBOL_GPL(analogix_dp_bind);
 
@@ -1786,10 +1792,15 @@ void analogix_dp_unbind(struct analogix_dp_device *dp)
 
 	drm_dp_aux_unregister(&dp->aux);
 	pm_runtime_disable(dp->dev);
-	clk_disable_unprepare(dp->clock);
 }
 EXPORT_SYMBOL_GPL(analogix_dp_unbind);
 
+void analogix_dp_remove(struct analogix_dp_device *dp)
+{
+	clk_disable_unprepare(dp->clock);
+}
+EXPORT_SYMBOL_GPL(analogix_dp_remove);
+
 #ifdef CONFIG_PM
 int analogix_dp_suspend(struct analogix_dp_device *dp)
 {
diff --git a/drivers/gpu/drm/exynos/exynos_dp.c b/drivers/gpu/drm/exynos/exynos_dp.c
index 4785885c0f4f9..065a1cb2a5444 100644
--- a/drivers/gpu/drm/exynos/exynos_dp.c
+++ b/drivers/gpu/drm/exynos/exynos_dp.c
@@ -158,15 +158,8 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp->dev = dev;
 	dp->drm_dev = drm_dev;
 
-	dp->plat_data.dev_type = EXYNOS_DP;
-	dp->plat_data.power_on_start = exynos_dp_poweron;
-	dp->plat_data.power_off = exynos_dp_poweroff;
-	dp->plat_data.attach = exynos_dp_bridge_attach;
-	dp->plat_data.get_modes = exynos_dp_get_modes;
-
 	if (!dp->plat_data.panel && !dp->ptn_bridge) {
 		ret = exynos_dp_dt_parse_panel(dp);
 		if (ret)
@@ -184,13 +177,11 @@ static int exynos_dp_bind(struct device *dev, struct device *master, void *data)
 
 	dp->plat_data.encoder = encoder;
 
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
+	ret = analogix_dp_bind(dp->adp, dp->drm_dev);
+	if (ret)
 		dp->encoder.funcs->destroy(&dp->encoder);
-		return PTR_ERR(dp->adp);
-	}
 
-	return 0;
+	return ret;
 }
 
 static void exynos_dp_unbind(struct device *dev, struct device *master,
@@ -221,6 +212,7 @@ static int exynos_dp_probe(struct platform_device *pdev)
 	if (!dp)
 		return -ENOMEM;
 
+	dp->dev = dev;
 	/*
 	 * We just use the drvdata until driver run into component
 	 * add function, and then we would set drvdata to null, so
@@ -246,16 +238,29 @@ static int exynos_dp_probe(struct platform_device *pdev)
 
 	/* The remote port can be either a panel or a bridge */
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = EXYNOS_DP;
+	dp->plat_data.power_on_start = exynos_dp_poweron;
+	dp->plat_data.power_off = exynos_dp_poweroff;
+	dp->plat_data.attach = exynos_dp_bridge_attach;
+	dp->plat_data.get_modes = exynos_dp_get_modes;
 	dp->plat_data.skip_connector = !!bridge;
+
 	dp->ptn_bridge = bridge;
 
 out:
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(&pdev->dev, &exynos_dp_ops);
 }
 
 static int exynos_dp_remove(struct platform_device *pdev)
 {
+	struct exynos_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &exynos_dp_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }
diff --git a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
index f38f5e113c6b3..ce98c08aa8b44 100644
--- a/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/analogix_dp-rockchip.c
@@ -325,15 +325,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 			    void *data)
 {
 	struct rockchip_dp_device *dp = dev_get_drvdata(dev);
-	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_device *drm_dev = data;
 	int ret;
 
-	dp_data = of_device_get_match_data(dev);
-	if (!dp_data)
-		return -ENODEV;
-
-	dp->data = dp_data;
 	dp->drm_dev = drm_dev;
 
 	ret = rockchip_dp_drm_create_encoder(dp);
@@ -344,16 +338,9 @@ static int rockchip_dp_bind(struct device *dev, struct device *master,
 
 	dp->plat_data.encoder = &dp->encoder;
 
-	dp->plat_data.dev_type = dp->data->chip_type;
-	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
-	dp->plat_data.power_off = rockchip_dp_powerdown;
-	dp->plat_data.get_modes = rockchip_dp_get_modes;
-
-	dp->adp = analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
-	if (IS_ERR(dp->adp)) {
-		ret = PTR_ERR(dp->adp);
+	ret = analogix_dp_bind(dp->adp, drm_dev);
+	if (ret)
 		goto err_cleanup_encoder;
-	}
 
 	return 0;
 err_cleanup_encoder:
@@ -368,8 +355,6 @@ static void rockchip_dp_unbind(struct device *dev, struct device *master,
 
 	analogix_dp_unbind(dp->adp);
 	dp->encoder.funcs->destroy(&dp->encoder);
-
-	dp->adp = ERR_PTR(-ENODEV);
 }
 
 static const struct component_ops rockchip_dp_component_ops = {
@@ -380,10 +365,15 @@ static const struct component_ops rockchip_dp_component_ops = {
 static int rockchip_dp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	const struct rockchip_dp_chip_data *dp_data;
 	struct drm_panel *panel = NULL;
 	struct rockchip_dp_device *dp;
 	int ret;
 
+	dp_data = of_device_get_match_data(dev);
+	if (!dp_data)
+		return -ENODEV;
+
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
 	if (ret < 0)
 		return ret;
@@ -394,7 +384,12 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	dp->dev = dev;
 	dp->adp = ERR_PTR(-ENODEV);
+	dp->data = dp_data;
 	dp->plat_data.panel = panel;
+	dp->plat_data.dev_type = dp->data->chip_type;
+	dp->plat_data.power_on_start = rockchip_dp_poweron_start;
+	dp->plat_data.power_off = rockchip_dp_powerdown;
+	dp->plat_data.get_modes = rockchip_dp_get_modes;
 
 	ret = rockchip_dp_of_probe(dp);
 	if (ret < 0)
@@ -402,12 +397,19 @@ static int rockchip_dp_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dp);
 
+	dp->adp = analogix_dp_probe(dev, &dp->plat_data);
+	if (IS_ERR(dp->adp))
+		return PTR_ERR(dp->adp);
+
 	return component_add(dev, &rockchip_dp_component_ops);
 }
 
 static int rockchip_dp_remove(struct platform_device *pdev)
 {
+	struct rockchip_dp_device *dp = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &rockchip_dp_component_ops);
+	analogix_dp_remove(dp->adp);
 
 	return 0;
 }
diff --git a/include/drm/bridge/analogix_dp.h b/include/drm/bridge/analogix_dp.h
index 7aa2f93da49ca..b0dcc07334a1e 100644
--- a/include/drm/bridge/analogix_dp.h
+++ b/include/drm/bridge/analogix_dp.h
@@ -42,9 +42,10 @@ int analogix_dp_resume(struct analogix_dp_device *dp);
 int analogix_dp_suspend(struct analogix_dp_device *dp);
 
 struct analogix_dp_device *
-analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
-		 struct analogix_dp_plat_data *plat_data);
+analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data);
+int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev);
 void analogix_dp_unbind(struct analogix_dp_device *dp);
+void analogix_dp_remove(struct analogix_dp_device *dp);
 
 int analogix_dp_start_crc(struct drm_connector *connector);
 int analogix_dp_stop_crc(struct drm_connector *connector);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 03/79] ARM: dts: bcm283x: Add cells encoding format to firmware bus

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit be08d278eb09210fefbad4c9b27d7843f1c096b2 ]

With the introduction of 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's
firmware bus DMA limitations") the firmware bus has to comply with
/soc's DMA limitations. Ultimately linking both buses to a same
dma-ranges property. The patch (and author) missed the fact that a bus'
#address-cells and #size-cells properties are not inherited, but set to
a fixed value which, in this case, doesn't match /soc's. This, although
not breaking Linux's DMA mapping functionality, generates ugly dtc
warnings.

Fix the issue by adding the correct address and size cells properties
under the firmware bus.

Fixes: 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200326134413.12298-1-nsaenzjulienne@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm2835-rpi.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index fd2c766e0f710..f7ae5a4530b88 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -14,6 +14,9 @@
 	soc {
 		firmware: firmware {
 			compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
 			mboxes = <&mailbox>;
 			dma-ranges;
 		};
-- 
2.20.1

[PATCH AUTOSEL 5.6 03/79] ARM: dts: bcm283x: Add cells encoding format to firmware bus

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit be08d278eb09210fefbad4c9b27d7843f1c096b2 ]

With the introduction of 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's
firmware bus DMA limitations") the firmware bus has to comply with
/soc's DMA limitations. Ultimately linking both buses to a same
dma-ranges property. The patch (and author) missed the fact that a bus'
#address-cells and #size-cells properties are not inherited, but set to
a fixed value which, in this case, doesn't match /soc's. This, although
not breaking Linux's DMA mapping functionality, generates ugly dtc
warnings.

Fix the issue by adding the correct address and size cells properties
under the firmware bus.

Fixes: 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's firmware bus DMA limitations")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200326134413.12298-1-nsaenzjulienne@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm2835-rpi.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index fd2c766e0f710..f7ae5a4530b88 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -14,6 +14,9 @@
 	soc {
 		firmware: firmware {
 			compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
 			mboxes = <&mailbox>;
 			dma-ranges;
 		};
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 04/79] iio:ad7797: Use correct attribute_group

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 28535877ac5b2b84f0d394fd67a5ec71c0c48b10 ]

It should use ad7797_attribute_group in ad7797_info,
according to commit ("iio:ad7793: Add support for the ad7796 and ad7797").

Scale is fixed for the ad7796 and not programmable, hence
should not have the scale_available attribute.

Fixes: fd1a8b912841 ("iio:ad7793: Add support for the ad7796 and ad7797")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/ad7793.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index b747db97f78ad..e5691e3303236 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -542,7 +542,7 @@ static const struct iio_info ad7797_info = {
 	.read_raw = &ad7793_read_raw,
 	.write_raw = &ad7793_write_raw,
 	.write_raw_get_fmt = &ad7793_write_raw_get_fmt,
-	.attrs = &ad7793_attribute_group,
+	.attrs = &ad7797_attribute_group,
 	.validate_trigger = ad_sd_validate_trigger,
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 05/79] iio: imu: st_lsm6dsx: fix read misalignment on untagged FIFO

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 7762902c89c4c78d32ec562f1ada44d02039104b ]

st_lsm6dsx suffers of a read misalignment on untagged FIFO when
all 3 supported sensors (accel, gyro and ext device) are running
at different ODRs (the use-case is reported in the LSM6DSM Application
Note at pag 100).
Fix the issue taking into account decimation factor reading the FIFO
pattern.

Fixes: e485e2a2cfd6 ("iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h       |  2 ++
 .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    | 23 +++++++++++++------
 2 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 9c3486a8134fd..b8ed6c900c457 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -337,6 +337,7 @@ enum st_lsm6dsx_fifo_mode {
  * @gain: Configured sensor sensitivity.
  * @odr: Output data rate of the sensor [Hz].
  * @watermark: Sensor watermark level.
+ * @decimator: Sensor decimation factor.
  * @sip: Number of samples in a given pattern.
  * @ts_ref: Sensor timestamp reference for hw one.
  * @ext_info: Sensor settings if it is connected to i2c controller
@@ -350,6 +351,7 @@ struct st_lsm6dsx_sensor {
 	u32 odr;
 
 	u16 watermark;
+	u8 decimator;
 	u8 sip;
 	s64 ts_ref;
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index bb899345f2bba..afd00daeefb2d 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -93,6 +93,7 @@ st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr)
 			break;
 	}
 
+	sensor->decimator = decimator;
 	return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
 }
 
@@ -337,7 +338,7 @@ static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr,
 int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
 {
 	struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor, *ext_sensor = NULL;
-	int err, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
+	int err, sip, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
 	u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
 	u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
 	u8 gyro_buff[ST_LSM6DSX_IIO_BUFF_SIZE];
@@ -399,19 +400,20 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
 		acc_sip = acc_sensor->sip;
 		ts_sip = hw->ts_sip;
 		offset = 0;
+		sip = 0;
 
 		while (acc_sip > 0 || gyro_sip > 0 || ext_sip > 0) {
-			if (gyro_sip > 0) {
+			if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
 				memcpy(gyro_buff, &hw->buff[offset],
 				       ST_LSM6DSX_SAMPLE_SIZE);
 				offset += ST_LSM6DSX_SAMPLE_SIZE;
 			}
-			if (acc_sip > 0) {
+			if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
 				memcpy(acc_buff, &hw->buff[offset],
 				       ST_LSM6DSX_SAMPLE_SIZE);
 				offset += ST_LSM6DSX_SAMPLE_SIZE;
 			}
-			if (ext_sip > 0) {
+			if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
 				memcpy(ext_buff, &hw->buff[offset],
 				       ST_LSM6DSX_SAMPLE_SIZE);
 				offset += ST_LSM6DSX_SAMPLE_SIZE;
@@ -441,18 +443,25 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
 				offset += ST_LSM6DSX_SAMPLE_SIZE;
 			}
 
-			if (gyro_sip-- > 0)
+			if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
 				iio_push_to_buffers_with_timestamp(
 					hw->iio_devs[ST_LSM6DSX_ID_GYRO],
 					gyro_buff, gyro_sensor->ts_ref + ts);
-			if (acc_sip-- > 0)
+				gyro_sip--;
+			}
+			if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
 				iio_push_to_buffers_with_timestamp(
 					hw->iio_devs[ST_LSM6DSX_ID_ACC],
 					acc_buff, acc_sensor->ts_ref + ts);
-			if (ext_sip-- > 0)
+				acc_sip--;
+			}
+			if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
 				iio_push_to_buffers_with_timestamp(
 					hw->iio_devs[ST_LSM6DSX_ID_EXT0],
 					ext_buff, ext_sensor->ts_ref + ts);
+				ext_sip--;
+			}
+			sip++;
 		}
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 06/79] iio: imu: st_lsm6dsx: specify slave odr in slv_odr

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 76551a3c3df151750a842b003c6899e9c62e0fd2 ]

Introduce slv_odr in ext_info data structure in order to distinguish
between sensor hub trigger (accel sensor) odr and i2c slave odr and
properly compute samples in FIFO pattern

Fixes: e485e2a2cfd6 ("iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  1 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 29 +++++++++++++++-----
 2 files changed, 23 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index b8ed6c900c457..84b27b6241495 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -357,6 +357,7 @@ struct st_lsm6dsx_sensor {
 
 	struct {
 		const struct st_lsm6dsx_ext_dev_settings *settings;
+		u32 slv_odr;
 		u8 addr;
 	} ext_info;
 };
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
index 95ddd19d1aa7c..64ef07a307263 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c
@@ -421,7 +421,8 @@ int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable)
 
 	settings = sensor->ext_info.settings;
 	if (enable) {
-		err = st_lsm6dsx_shub_set_odr(sensor, sensor->odr);
+		err = st_lsm6dsx_shub_set_odr(sensor,
+					      sensor->ext_info.slv_odr);
 		if (err < 0)
 			return err;
 	} else {
@@ -459,7 +460,7 @@ st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor,
 	if (err < 0)
 		return err;
 
-	delay = 1000000000 / sensor->odr;
+	delay = 1000000000 / sensor->ext_info.slv_odr;
 	usleep_range(delay, 2 * delay);
 
 	len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3);
@@ -500,8 +501,8 @@ st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev,
 		iio_device_release_direct_mode(iio_dev);
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		*val = sensor->odr / 1000;
-		*val2 = (sensor->odr % 1000) * 1000;
+		*val = sensor->ext_info.slv_odr / 1000;
+		*val2 = (sensor->ext_info.slv_odr % 1000) * 1000;
 		ret = IIO_VAL_INT_PLUS_MICRO;
 		break;
 	case IIO_CHAN_INFO_SCALE:
@@ -535,8 +536,20 @@ st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
 
 		val = val * 1000 + val2 / 1000;
 		err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data);
-		if (!err)
-			sensor->odr = val;
+		if (!err) {
+			struct st_lsm6dsx_hw *hw = sensor->hw;
+			struct st_lsm6dsx_sensor *ref_sensor;
+			u8 odr_val;
+			int odr;
+
+			ref_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
+			odr = st_lsm6dsx_check_odr(ref_sensor, val, &odr_val);
+			if (odr < 0)
+				return odr;
+
+			sensor->ext_info.slv_odr = val;
+			sensor->odr = odr;
+		}
 		break;
 	}
 	default:
@@ -613,6 +626,7 @@ st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 			     const struct st_lsm6dsx_ext_dev_settings *info,
 			     u8 i2c_addr, const char *name)
 {
+	enum st_lsm6dsx_sensor_id ref_id = ST_LSM6DSX_ID_ACC;
 	struct iio_chan_spec *ext_channels;
 	struct st_lsm6dsx_sensor *sensor;
 	struct iio_dev *iio_dev;
@@ -628,7 +642,8 @@ st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	sensor = iio_priv(iio_dev);
 	sensor->id = id;
 	sensor->hw = hw;
-	sensor->odr = info->odr_table.odr_avl[0].milli_hz;
+	sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz;
+	sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz;
 	sensor->gain = info->fs_table.fs_avl[0].gain;
 	sensor->ext_info.settings = info;
 	sensor->ext_info.addr = i2c_addr;
-- 
2.20.1

[PATCH AUTOSEL 5.6 07/79] ASoC: topology: Add missing memory checks

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit abc3caac24501008465fdb55c5e89e16d58d5a3d ]

kstrdup is an allocation function and it can fail, so its return value
should be checked and handled appropriately.

In order to check all cases, we need to modify set_stream_info to return
a value, so check that everything went correctly when doing kstrdup().
Later add proper checks and error handlers.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 62 +++++++++++++++++++++++++++++++---------
 1 file changed, 49 insertions(+), 13 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index a152409e8746e..7a7c427de95d6 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1766,10 +1766,13 @@ static int soc_tplg_dapm_complete(struct soc_tplg *tplg)
 	return 0;
 }
 
-static void set_stream_info(struct snd_soc_pcm_stream *stream,
+static int set_stream_info(struct snd_soc_pcm_stream *stream,
 	struct snd_soc_tplg_stream_caps *caps)
 {
 	stream->stream_name = kstrdup(caps->name, GFP_KERNEL);
+	if (!stream->stream_name)
+		return -ENOMEM;
+
 	stream->channels_min = le32_to_cpu(caps->channels_min);
 	stream->channels_max = le32_to_cpu(caps->channels_max);
 	stream->rates = le32_to_cpu(caps->rates);
@@ -1777,6 +1780,8 @@ static void set_stream_info(struct snd_soc_pcm_stream *stream,
 	stream->rate_max = le32_to_cpu(caps->rate_max);
 	stream->formats = le64_to_cpu(caps->formats);
 	stream->sig_bits = le32_to_cpu(caps->sig_bits);
+
+	return 0;
 }
 
 static void set_dai_flags(struct snd_soc_dai_driver *dai_drv,
@@ -1812,20 +1817,29 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg,
 	if (dai_drv == NULL)
 		return -ENOMEM;
 
-	if (strlen(pcm->dai_name))
+	if (strlen(pcm->dai_name)) {
 		dai_drv->name = kstrdup(pcm->dai_name, GFP_KERNEL);
+		if (!dai_drv->name) {
+			ret = -ENOMEM;
+			goto err;
+		}
+	}
 	dai_drv->id = le32_to_cpu(pcm->dai_id);
 
 	if (pcm->playback) {
 		stream = &dai_drv->playback;
 		caps = &pcm->caps[SND_SOC_TPLG_STREAM_PLAYBACK];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (pcm->capture) {
 		stream = &dai_drv->capture;
 		caps = &pcm->caps[SND_SOC_TPLG_STREAM_CAPTURE];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (pcm->compress)
@@ -1835,11 +1849,7 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg,
 	ret = soc_tplg_dai_load(tplg, dai_drv, pcm, NULL);
 	if (ret < 0) {
 		dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n");
-		kfree(dai_drv->playback.stream_name);
-		kfree(dai_drv->capture.stream_name);
-		kfree(dai_drv->name);
-		kfree(dai_drv);
-		return ret;
+		goto err;
 	}
 
 	dai_drv->dobj.index = tplg->index;
@@ -1860,6 +1870,14 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg,
 		return ret;
 	}
 
+	return 0;
+
+err:
+	kfree(dai_drv->playback.stream_name);
+	kfree(dai_drv->capture.stream_name);
+	kfree(dai_drv->name);
+	kfree(dai_drv);
+
 	return ret;
 }
 
@@ -1916,11 +1934,20 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg,
 	if (strlen(pcm->pcm_name)) {
 		link->name = kstrdup(pcm->pcm_name, GFP_KERNEL);
 		link->stream_name = kstrdup(pcm->pcm_name, GFP_KERNEL);
+		if (!link->name || !link->stream_name) {
+			ret = -ENOMEM;
+			goto err;
+		}
 	}
 	link->id = le32_to_cpu(pcm->pcm_id);
 
-	if (strlen(pcm->dai_name))
+	if (strlen(pcm->dai_name)) {
 		link->cpus->dai_name = kstrdup(pcm->dai_name, GFP_KERNEL);
+		if (!link->cpus->dai_name) {
+			ret = -ENOMEM;
+			goto err;
+		}
+	}
 
 	link->codecs->name = "snd-soc-dummy";
 	link->codecs->dai_name = "snd-soc-dummy-dai";
@@ -2436,13 +2463,17 @@ static int soc_tplg_dai_config(struct soc_tplg *tplg,
 	if (d->playback) {
 		stream = &dai_drv->playback;
 		caps = &d->caps[SND_SOC_TPLG_STREAM_PLAYBACK];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (d->capture) {
 		stream = &dai_drv->capture;
 		caps = &d->caps[SND_SOC_TPLG_STREAM_CAPTURE];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (d->flag_mask)
@@ -2454,10 +2485,15 @@ static int soc_tplg_dai_config(struct soc_tplg *tplg,
 	ret = soc_tplg_dai_load(tplg, dai_drv, NULL, dai);
 	if (ret < 0) {
 		dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n");
-		return ret;
+		goto err;
 	}
 
 	return 0;
+
+err:
+	kfree(dai_drv->playback.stream_name);
+	kfree(dai_drv->capture.stream_name);
+	return ret;
 }
 
 /* load physical DAI elements */
-- 
2.20.1

[PATCH AUTOSEL 5.6 07/79] ASoC: topology: Add missing memory checks

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit abc3caac24501008465fdb55c5e89e16d58d5a3d ]

kstrdup is an allocation function and it can fail, so its return value
should be checked and handled appropriately.

In order to check all cases, we need to modify set_stream_info to return
a value, so check that everything went correctly when doing kstrdup().
Later add proper checks and error handlers.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 62 +++++++++++++++++++++++++++++++---------
 1 file changed, 49 insertions(+), 13 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index a152409e8746e..7a7c427de95d6 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1766,10 +1766,13 @@ static int soc_tplg_dapm_complete(struct soc_tplg *tplg)
 	return 0;
 }
 
-static void set_stream_info(struct snd_soc_pcm_stream *stream,
+static int set_stream_info(struct snd_soc_pcm_stream *stream,
 	struct snd_soc_tplg_stream_caps *caps)
 {
 	stream->stream_name = kstrdup(caps->name, GFP_KERNEL);
+	if (!stream->stream_name)
+		return -ENOMEM;
+
 	stream->channels_min = le32_to_cpu(caps->channels_min);
 	stream->channels_max = le32_to_cpu(caps->channels_max);
 	stream->rates = le32_to_cpu(caps->rates);
@@ -1777,6 +1780,8 @@ static void set_stream_info(struct snd_soc_pcm_stream *stream,
 	stream->rate_max = le32_to_cpu(caps->rate_max);
 	stream->formats = le64_to_cpu(caps->formats);
 	stream->sig_bits = le32_to_cpu(caps->sig_bits);
+
+	return 0;
 }
 
 static void set_dai_flags(struct snd_soc_dai_driver *dai_drv,
@@ -1812,20 +1817,29 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg,
 	if (dai_drv == NULL)
 		return -ENOMEM;
 
-	if (strlen(pcm->dai_name))
+	if (strlen(pcm->dai_name)) {
 		dai_drv->name = kstrdup(pcm->dai_name, GFP_KERNEL);
+		if (!dai_drv->name) {
+			ret = -ENOMEM;
+			goto err;
+		}
+	}
 	dai_drv->id = le32_to_cpu(pcm->dai_id);
 
 	if (pcm->playback) {
 		stream = &dai_drv->playback;
 		caps = &pcm->caps[SND_SOC_TPLG_STREAM_PLAYBACK];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (pcm->capture) {
 		stream = &dai_drv->capture;
 		caps = &pcm->caps[SND_SOC_TPLG_STREAM_CAPTURE];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (pcm->compress)
@@ -1835,11 +1849,7 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg,
 	ret = soc_tplg_dai_load(tplg, dai_drv, pcm, NULL);
 	if (ret < 0) {
 		dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n");
-		kfree(dai_drv->playback.stream_name);
-		kfree(dai_drv->capture.stream_name);
-		kfree(dai_drv->name);
-		kfree(dai_drv);
-		return ret;
+		goto err;
 	}
 
 	dai_drv->dobj.index = tplg->index;
@@ -1860,6 +1870,14 @@ static int soc_tplg_dai_create(struct soc_tplg *tplg,
 		return ret;
 	}
 
+	return 0;
+
+err:
+	kfree(dai_drv->playback.stream_name);
+	kfree(dai_drv->capture.stream_name);
+	kfree(dai_drv->name);
+	kfree(dai_drv);
+
 	return ret;
 }
 
@@ -1916,11 +1934,20 @@ static int soc_tplg_fe_link_create(struct soc_tplg *tplg,
 	if (strlen(pcm->pcm_name)) {
 		link->name = kstrdup(pcm->pcm_name, GFP_KERNEL);
 		link->stream_name = kstrdup(pcm->pcm_name, GFP_KERNEL);
+		if (!link->name || !link->stream_name) {
+			ret = -ENOMEM;
+			goto err;
+		}
 	}
 	link->id = le32_to_cpu(pcm->pcm_id);
 
-	if (strlen(pcm->dai_name))
+	if (strlen(pcm->dai_name)) {
 		link->cpus->dai_name = kstrdup(pcm->dai_name, GFP_KERNEL);
+		if (!link->cpus->dai_name) {
+			ret = -ENOMEM;
+			goto err;
+		}
+	}
 
 	link->codecs->name = "snd-soc-dummy";
 	link->codecs->dai_name = "snd-soc-dummy-dai";
@@ -2436,13 +2463,17 @@ static int soc_tplg_dai_config(struct soc_tplg *tplg,
 	if (d->playback) {
 		stream = &dai_drv->playback;
 		caps = &d->caps[SND_SOC_TPLG_STREAM_PLAYBACK];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (d->capture) {
 		stream = &dai_drv->capture;
 		caps = &d->caps[SND_SOC_TPLG_STREAM_CAPTURE];
-		set_stream_info(stream, caps);
+		ret = set_stream_info(stream, caps);
+		if (ret < 0)
+			goto err;
 	}
 
 	if (d->flag_mask)
@@ -2454,10 +2485,15 @@ static int soc_tplg_dai_config(struct soc_tplg *tplg,
 	ret = soc_tplg_dai_load(tplg, dai_drv, NULL, dai);
 	if (ret < 0) {
 		dev_err(tplg->comp->dev, "ASoC: DAI loading failed\n");
-		return ret;
+		goto err;
 	}
 
 	return 0;
+
+err:
+	kfree(dai_drv->playback.stream_name);
+	kfree(dai_drv->capture.stream_name);
+	return ret;
 }
 
 /* load physical DAI elements */
-- 
2.20.1

[PATCH AUTOSEL 5.6 08/79] ASoC: topology: Check return value of soc_tplg_create_tlv

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 482db55ae87f3749db05810a38b1d618dfd4407c ]

Function soc_tplg_create_tlv can fail, so we should check if it succeded
or not and proceed appropriately.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 7a7c427de95d6..5d974a36cdc92 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -894,7 +894,13 @@ static int soc_tplg_dmixer_create(struct soc_tplg *tplg, unsigned int count,
 		}
 
 		/* create any TLV data */
-		soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+		err = soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+		if (err < 0) {
+			dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+				mc->hdr.name);
+			kfree(sm);
+			continue;
+		}
 
 		/* pass control to driver for optional further init */
 		err = soc_tplg_init_kcontrol(tplg, &kc,
@@ -1355,7 +1361,13 @@ static struct snd_kcontrol_new *soc_tplg_dapm_widget_dmixer_create(
 		}
 
 		/* create any TLV data */
-		soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+		err = soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+		if (err < 0) {
+			dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+				mc->hdr.name);
+			kfree(sm);
+			continue;
+		}
 
 		/* pass control to driver for optional further init */
 		err = soc_tplg_init_kcontrol(tplg, &kc[i],
-- 
2.20.1

[PATCH AUTOSEL 5.6 08/79] ASoC: topology: Check return value of soc_tplg_create_tlv

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 482db55ae87f3749db05810a38b1d618dfd4407c ]

Function soc_tplg_create_tlv can fail, so we should check if it succeded
or not and proceed appropriately.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 7a7c427de95d6..5d974a36cdc92 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -894,7 +894,13 @@ static int soc_tplg_dmixer_create(struct soc_tplg *tplg, unsigned int count,
 		}
 
 		/* create any TLV data */
-		soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+		err = soc_tplg_create_tlv(tplg, &kc, &mc->hdr);
+		if (err < 0) {
+			dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+				mc->hdr.name);
+			kfree(sm);
+			continue;
+		}
 
 		/* pass control to driver for optional further init */
 		err = soc_tplg_init_kcontrol(tplg, &kc,
@@ -1355,7 +1361,13 @@ static struct snd_kcontrol_new *soc_tplg_dapm_widget_dmixer_create(
 		}
 
 		/* create any TLV data */
-		soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+		err = soc_tplg_create_tlv(tplg, &kc[i], &mc->hdr);
+		if (err < 0) {
+			dev_err(tplg->dev, "ASoC: failed to create TLV %s\n",
+				mc->hdr.name);
+			kfree(sm);
+			continue;
+		}
 
 		/* pass control to driver for optional further init */
 		err = soc_tplg_init_kcontrol(tplg, &kc[i],
-- 
2.20.1

[PATCH AUTOSEL 5.6 09/79] ASoC: topology: Check return value of soc_tplg_*_create

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 2ae548f30d7f6973388fc3769bb3c2f6fd13652b ]

Functions soc_tplg_denum_create, soc_tplg_dmixer_create,
soc_tplg_dbytes_create can fail, so their return values should be
checked and error should be propagated.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 5d974a36cdc92..c86c3ea533f68 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1124,6 +1124,7 @@ static int soc_tplg_kcontrol_elems_load(struct soc_tplg *tplg,
 	struct snd_soc_tplg_hdr *hdr)
 {
 	struct snd_soc_tplg_ctl_hdr *control_hdr;
+	int ret;
 	int i;
 
 	if (tplg->pass != SOC_TPLG_PASS_MIXER) {
@@ -1152,25 +1153,30 @@ static int soc_tplg_kcontrol_elems_load(struct soc_tplg *tplg,
 		case SND_SOC_TPLG_CTL_RANGE:
 		case SND_SOC_TPLG_DAPM_CTL_VOLSW:
 		case SND_SOC_TPLG_DAPM_CTL_PIN:
-			soc_tplg_dmixer_create(tplg, 1,
-					       le32_to_cpu(hdr->payload_size));
+			ret = soc_tplg_dmixer_create(tplg, 1,
+					le32_to_cpu(hdr->payload_size));
 			break;
 		case SND_SOC_TPLG_CTL_ENUM:
 		case SND_SOC_TPLG_CTL_ENUM_VALUE:
 		case SND_SOC_TPLG_DAPM_CTL_ENUM_DOUBLE:
 		case SND_SOC_TPLG_DAPM_CTL_ENUM_VIRT:
 		case SND_SOC_TPLG_DAPM_CTL_ENUM_VALUE:
-			soc_tplg_denum_create(tplg, 1,
-					      le32_to_cpu(hdr->payload_size));
+			ret = soc_tplg_denum_create(tplg, 1,
+					le32_to_cpu(hdr->payload_size));
 			break;
 		case SND_SOC_TPLG_CTL_BYTES:
-			soc_tplg_dbytes_create(tplg, 1,
-					       le32_to_cpu(hdr->payload_size));
+			ret = soc_tplg_dbytes_create(tplg, 1,
+					le32_to_cpu(hdr->payload_size));
 			break;
 		default:
 			soc_bind_err(tplg, control_hdr, i);
 			return -EINVAL;
 		}
+		if (ret < 0) {
+			dev_err(tplg->dev, "ASoC: invalid control\n");
+			return ret;
+		}
+
 	}
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.6 09/79] ASoC: topology: Check return value of soc_tplg_*_create

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 2ae548f30d7f6973388fc3769bb3c2f6fd13652b ]

Functions soc_tplg_denum_create, soc_tplg_dmixer_create,
soc_tplg_dbytes_create can fail, so their return values should be
checked and error should be propagated.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index 5d974a36cdc92..c86c3ea533f68 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1124,6 +1124,7 @@ static int soc_tplg_kcontrol_elems_load(struct soc_tplg *tplg,
 	struct snd_soc_tplg_hdr *hdr)
 {
 	struct snd_soc_tplg_ctl_hdr *control_hdr;
+	int ret;
 	int i;
 
 	if (tplg->pass != SOC_TPLG_PASS_MIXER) {
@@ -1152,25 +1153,30 @@ static int soc_tplg_kcontrol_elems_load(struct soc_tplg *tplg,
 		case SND_SOC_TPLG_CTL_RANGE:
 		case SND_SOC_TPLG_DAPM_CTL_VOLSW:
 		case SND_SOC_TPLG_DAPM_CTL_PIN:
-			soc_tplg_dmixer_create(tplg, 1,
-					       le32_to_cpu(hdr->payload_size));
+			ret = soc_tplg_dmixer_create(tplg, 1,
+					le32_to_cpu(hdr->payload_size));
 			break;
 		case SND_SOC_TPLG_CTL_ENUM:
 		case SND_SOC_TPLG_CTL_ENUM_VALUE:
 		case SND_SOC_TPLG_DAPM_CTL_ENUM_DOUBLE:
 		case SND_SOC_TPLG_DAPM_CTL_ENUM_VIRT:
 		case SND_SOC_TPLG_DAPM_CTL_ENUM_VALUE:
-			soc_tplg_denum_create(tplg, 1,
-					      le32_to_cpu(hdr->payload_size));
+			ret = soc_tplg_denum_create(tplg, 1,
+					le32_to_cpu(hdr->payload_size));
 			break;
 		case SND_SOC_TPLG_CTL_BYTES:
-			soc_tplg_dbytes_create(tplg, 1,
-					       le32_to_cpu(hdr->payload_size));
+			ret = soc_tplg_dbytes_create(tplg, 1,
+					le32_to_cpu(hdr->payload_size));
 			break;
 		default:
 			soc_bind_err(tplg, control_hdr, i);
 			return -EINVAL;
 		}
+		if (ret < 0) {
+			dev_err(tplg->dev, "ASoC: invalid control\n");
+			return ret;
+		}
+
 	}
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.6 10/79] ASoC: topology: Check soc_tplg_add_route return value

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 6856e887eae3efc0fe56899cb3f969fe063171c5 ]

Function soc_tplg_add_route can propagate error code from callback, we
should check its return value and handle fail in correct way.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index c86c3ea533f68..aa7714f2b78fd 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1284,7 +1284,9 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg,
 		routes[i]->dobj.index = tplg->index;
 		list_add(&routes[i]->dobj.list, &tplg->comp->dobj_list);
 
-		soc_tplg_add_route(tplg, routes[i]);
+		ret = soc_tplg_add_route(tplg, routes[i]);
+		if (ret < 0)
+			break;
 
 		/* add route, but keep going if some fail */
 		snd_soc_dapm_add_routes(dapm, routes[i], 1);
-- 
2.20.1

[PATCH AUTOSEL 5.6 10/79] ASoC: topology: Check soc_tplg_add_route return value

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 6856e887eae3efc0fe56899cb3f969fe063171c5 ]

Function soc_tplg_add_route can propagate error code from callback, we
should check its return value and handle fail in correct way.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index c86c3ea533f68..aa7714f2b78fd 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -1284,7 +1284,9 @@ static int soc_tplg_dapm_graph_elems_load(struct soc_tplg *tplg,
 		routes[i]->dobj.index = tplg->index;
 		list_add(&routes[i]->dobj.list, &tplg->comp->dobj_list);
 
-		soc_tplg_add_route(tplg, routes[i]);
+		ret = soc_tplg_add_route(tplg, routes[i]);
+		if (ret < 0)
+			break;
 
 		/* add route, but keep going if some fail */
 		snd_soc_dapm_add_routes(dapm, routes[i], 1);
-- 
2.20.1

[PATCH AUTOSEL 5.6 11/79] ASoC: topology: Check return value of pcm_new_ver

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit b3677fc3d68dd942c92de52f0bd9dd8b472a40e6 ]

Function pcm_new_ver can fail, so we should check it's return value and
handle possible error.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index aa7714f2b78fd..ca0ac5372b293 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2135,7 +2135,9 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 			_pcm = pcm;
 		} else {
 			abi_match = false;
-			pcm_new_ver(tplg, pcm, &_pcm);
+			ret = pcm_new_ver(tplg, pcm, &_pcm);
+			if (ret < 0)
+				return ret;
 		}
 
 		/* create the FE DAIs and DAI links */
-- 
2.20.1

[PATCH AUTOSEL 5.6 11/79] ASoC: topology: Check return value of pcm_new_ver

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit b3677fc3d68dd942c92de52f0bd9dd8b472a40e6 ]

Function pcm_new_ver can fail, so we should check it's return value and
handle possible error.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index aa7714f2b78fd..ca0ac5372b293 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2135,7 +2135,9 @@ static int soc_tplg_pcm_elems_load(struct soc_tplg *tplg,
 			_pcm = pcm;
 		} else {
 			abi_match = false;
-			pcm_new_ver(tplg, pcm, &_pcm);
+			ret = pcm_new_ver(tplg, pcm, &_pcm);
+			if (ret < 0)
+				return ret;
 		}
 
 		/* create the FE DAIs and DAI links */
-- 
2.20.1

[PATCH AUTOSEL 5.6 12/79] ASoC: topology: Check return value of soc_tplg_dai_config

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit dd8e871d4e560eeb8d22af82dde91457ad835a63 ]

Function soc_tplg_dai_config can fail, check for and handle possible
failure.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index ca0ac5372b293..e6a17ab433eea 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2524,7 +2524,7 @@ static int soc_tplg_dai_elems_load(struct soc_tplg *tplg,
 {
 	struct snd_soc_tplg_dai *dai;
 	int count;
-	int i;
+	int i, ret;
 
 	count = le32_to_cpu(hdr->count);
 
@@ -2539,7 +2539,12 @@ static int soc_tplg_dai_elems_load(struct soc_tplg *tplg,
 			return -EINVAL;
 		}
 
-		soc_tplg_dai_config(tplg, dai);
+		ret = soc_tplg_dai_config(tplg, dai);
+		if (ret < 0) {
+			dev_err(tplg->dev, "ASoC: failed to configure DAI\n");
+			return ret;
+		}
+
 		tplg->pos += (sizeof(*dai) + le32_to_cpu(dai->priv.size));
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 12/79] ASoC: topology: Check return value of soc_tplg_dai_config

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit dd8e871d4e560eeb8d22af82dde91457ad835a63 ]

Function soc_tplg_dai_config can fail, check for and handle possible
failure.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-7-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index ca0ac5372b293..e6a17ab433eea 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2524,7 +2524,7 @@ static int soc_tplg_dai_elems_load(struct soc_tplg *tplg,
 {
 	struct snd_soc_tplg_dai *dai;
 	int count;
-	int i;
+	int i, ret;
 
 	count = le32_to_cpu(hdr->count);
 
@@ -2539,7 +2539,12 @@ static int soc_tplg_dai_elems_load(struct soc_tplg *tplg,
 			return -EINVAL;
 		}
 
-		soc_tplg_dai_config(tplg, dai);
+		ret = soc_tplg_dai_config(tplg, dai);
+		if (ret < 0) {
+			dev_err(tplg->dev, "ASoC: failed to configure DAI\n");
+			return ret;
+		}
+
 		tplg->pos += (sizeof(*dai) + le32_to_cpu(dai->priv.size));
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 13/79] nfsd: memory corruption in nfsd4_lock()

[Sasha Levin]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit e1e8399eee72e9d5246d4d1bcacd793debe34dd3 ]

New struct nfsd4_blocked_lock allocated in find_or_allocate_block()
does not initialized nbl_list and nbl_lru.
If conflock allocation fails rollback can call list_del_init()
access uninitialized fields and corrupt memory.

v2: just initialize nbl_list and nbl_lru right after nbl allocation.

Fixes: 76d348fadff5 ("nfsd: have nfsd4_lock use blocking locks for v4.1+ lock")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfsd/nfs4state.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 65cfe9ab47be0..de9fbe7ed06ce 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -267,6 +267,8 @@ find_or_allocate_block(struct nfs4_lockowner *lo, struct knfsd_fh *fh,
 	if (!nbl) {
 		nbl= kmalloc(sizeof(*nbl), GFP_KERNEL);
 		if (nbl) {
+			INIT_LIST_HEAD(&nbl->nbl_list);
+			INIT_LIST_HEAD(&nbl->nbl_lru);
 			fh_copy_shallow(&nbl->nbl_fh, fh);
 			locks_init_lock(&nbl->nbl_lock);
 			nfsd4_init_cb(&nbl->nbl_cb, lo->lo_owner.so_client,
-- 
2.20.1

[PATCH AUTOSEL 5.6 14/79] SUNRPC/cache: Fix unsafe traverse caused double-free in cache_purge

[Sasha Levin]

From: Yihao Wu <wuyihao@linux.alibaba.com>

[ Upstream commit 43e33924c38e8faeb0c12035481cb150e602e39d ]

Deleting list entry within hlist_for_each_entry_safe is not safe unless
next pointer (tmp) is protected too. It's not, because once hash_lock
is released, cache_clean may delete the entry that tmp points to. Then
cache_purge can walk to a deleted entry and tries to double free it.

Fix this bug by holding only the deleted entry's reference.

Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yihao Wu <wuyihao@linux.alibaba.com>
Reviewed-by: NeilBrown <neilb@suse.de>
[ cel: removed unused variable ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/cache.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index bd843a81afa0b..d36cea4e270de 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -521,7 +521,6 @@ void cache_purge(struct cache_detail *detail)
 {
 	struct cache_head *ch = NULL;
 	struct hlist_head *head = NULL;
-	struct hlist_node *tmp = NULL;
 	int i = 0;
 
 	spin_lock(&detail->hash_lock);
@@ -533,7 +532,9 @@ void cache_purge(struct cache_detail *detail)
 	dprintk("RPC: %d entries in %s cache\n", detail->entries, detail->name);
 	for (i = 0; i < detail->hash_size; i++) {
 		head = &detail->hash_table[i];
-		hlist_for_each_entry_safe(ch, tmp, head, cache_list) {
+		while (!hlist_empty(head)) {
+			ch = hlist_entry(head->first, struct cache_head,
+					 cache_list);
 			sunrpc_begin_cache_remove_entry(ch, detail);
 			spin_unlock(&detail->hash_lock);
 			sunrpc_end_cache_remove_entry(ch, detail);
-- 
2.20.1

[PATCH AUTOSEL 5.6 15/79] selftests: vm: Do not override definition of ARCH

[Sasha Levin]

From: Sandipan Das <sandipan@linux.ibm.com>

[ Upstream commit 24c3f063c57b2a8ae21b259bcfa7690e2eb56dd9 ]

Independent builds of the vm selftests is currently broken because
commit 7549b3364201 ("selftests: vm: Build/Run 64bit tests only on
64bit arch") overrides the value of ARCH with the machine name from
uname. This does not always match the architecture names used for
tasks like header installation.

E.g. for building tests on powerpc64, we need ARCH=powerpc
and not ARCH=ppc64 or ARCH=ppc64le. Otherwise, the build
fails as shown below.

  $ uname -m
  ppc64le

  $ make -C tools/testing/selftests/vm
  make: Entering directory '/home/sandipan/linux/tools/testing/selftests/vm'
  make --no-builtin-rules ARCH=ppc64le -C ../../../.. headers_install
  make[1]: Entering directory '/home/sandipan/linux'
  Makefile:653: arch/ppc64le/Makefile: No such file or directory
  make[1]: *** No rule to make target 'arch/ppc64le/Makefile'.  Stop.
  make[1]: Leaving directory '/home/sandipan/linux'
  ../lib.mk:50: recipe for target 'khdr' failed
  make: *** [khdr] Error 2
  make: Leaving directory '/home/sandipan/linux/tools/testing/selftests/vm'

Fixes: 7549b3364201 ("selftests: vm: Build/Run 64bit tests only on 64bit arch")
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/vm/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile
index 7f9a8a8c31da9..3f2e2f0ccbc9a 100644
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for vm selftests
 uname_M := $(shell uname -m 2>/dev/null || echo not)
-ARCH ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/')
+MACHINE ?= $(shell echo $(uname_M) | sed -e 's/aarch64.*/arm64/')
 
 CFLAGS = -Wall -I ../../../../usr/include $(EXTRA_CFLAGS)
 LDLIBS = -lrt
@@ -19,7 +19,7 @@ TEST_GEN_FILES += thuge-gen
 TEST_GEN_FILES += transhuge-stress
 TEST_GEN_FILES += userfaultfd
 
-ifneq (,$(filter $(ARCH),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64))
+ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64))
 TEST_GEN_FILES += va_128TBswitch
 TEST_GEN_FILES += virtual_address_range
 endif
-- 
2.20.1

[PATCH AUTOSEL 5.6 16/79] selftests: vm: Fix 64-bit test builds for powerpc64le

[Sasha Levin]

From: Sandipan Das <sandipan@linux.ibm.com>

[ Upstream commit 963e3e9c9a127013eb4d3c82eb997068b1adbb89 ]

Some tests are built only for 64-bit systems. This makes
sure that these tests are built for both big and little
endian variants of powerpc64.

Fixes: 7549b3364201 ("selftests: vm: Build/Run 64bit tests only on 64bit arch")
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/vm/Makefile    | 2 +-
 tools/testing/selftests/vm/run_vmtests | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile
index 3f2e2f0ccbc9a..8074340c6b3ab 100644
--- a/tools/testing/selftests/vm/Makefile
+++ b/tools/testing/selftests/vm/Makefile
@@ -19,7 +19,7 @@ TEST_GEN_FILES += thuge-gen
 TEST_GEN_FILES += transhuge-stress
 TEST_GEN_FILES += userfaultfd
 
-ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64))
+ifneq (,$(filter $(MACHINE),arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64))
 TEST_GEN_FILES += va_128TBswitch
 TEST_GEN_FILES += virtual_address_range
 endif
diff --git a/tools/testing/selftests/vm/run_vmtests b/tools/testing/selftests/vm/run_vmtests
index f337148431980..6e137c9baa1e0 100755
--- a/tools/testing/selftests/vm/run_vmtests
+++ b/tools/testing/selftests/vm/run_vmtests
@@ -59,7 +59,7 @@ else
 fi
 
 #filter 64bit architectures
-ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 riscv64 s390x sh64 sparc64 x86_64"
+ARCH64STR="arm64 ia64 mips64 parisc64 ppc64 ppc64le riscv64 s390x sh64 sparc64 x86_64"
 if [ -z $ARCH ]; then
   ARCH=`uname -m 2>/dev/null | sed -e 's/aarch64.*/arm64/'`
 fi
-- 
2.20.1

[PATCH AUTOSEL 5.6 17/79] ASoC: samsung: s3c24xx-i2s: Fix build after removal of DAI suspend/resume

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit ec21bdc6dd16d74b3674ef1fd12ae8e4e7418603 ]

Commit 450312b640f9 ("ASoC: soc-core: remove DAI suspend/resume")
removed the DAI side suspend/resume hooks and switched entirely to
component suspend/resume.  However the Samsung SoC s3c-i2s-v2 driver was
not updated.

Move the suspend/resume hooks from s3c-i2s-v2.c to s3c2412-i2s.c while
changing dai to component which allows to keep the struct
snd_soc_component_driver const.

This fixes build errors:

    sound/soc/samsung/s3c-i2s-v2.c: In function ‘s3c_i2sv2_register_component’:
    sound/soc/samsung/s3c-i2s-v2.c:730:9: error: ‘struct snd_soc_dai_driver’ has no member named ‘suspend’
      dai_drv->suspend = s3c2412_i2s_suspend;

Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 450312b640f9 ("ASoC: soc-core: remove DAI suspend/resume")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Link: https://lore.kernel.org/r/20200413124548.28197-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/samsung/s3c-i2s-v2.c  | 57 ---------------------------------
 sound/soc/samsung/s3c2412-i2s.c | 56 ++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+), 57 deletions(-)

diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
index 593be1b668d64..b3e12d6a78a19 100644
--- a/sound/soc/samsung/s3c-i2s-v2.c
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -656,60 +656,6 @@ void s3c_i2sv2_cleanup(struct snd_soc_dai *dai,
 }
 EXPORT_SYMBOL_GPL(s3c_i2sv2_cleanup);
 
-#ifdef CONFIG_PM
-static int s3c2412_i2s_suspend(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = to_info(dai);
-	u32 iismod;
-
-	if (dai->active) {
-		i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
-		i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
-		i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
-
-		/* some basic suspend checks */
-
-		iismod = readl(i2s->regs + S3C2412_IISMOD);
-
-		if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
-			pr_warn("%s: RXDMA active?\n", __func__);
-
-		if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
-			pr_warn("%s: TXDMA active?\n", __func__);
-
-		if (iismod & S3C2412_IISCON_IIS_ACTIVE)
-			pr_warn("%s: IIS active\n", __func__);
-	}
-
-	return 0;
-}
-
-static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = to_info(dai);
-
-	pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n",
-		dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
-
-	if (dai->active) {
-		writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
-		writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
-		writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
-
-		writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
-		       i2s->regs + S3C2412_IISFIC);
-
-		ndelay(250);
-		writel(0x0, i2s->regs + S3C2412_IISFIC);
-	}
-
-	return 0;
-}
-#else
-#define s3c2412_i2s_suspend NULL
-#define s3c2412_i2s_resume  NULL
-#endif
-
 int s3c_i2sv2_register_component(struct device *dev, int id,
 			   const struct snd_soc_component_driver *cmp_drv,
 			   struct snd_soc_dai_driver *dai_drv)
@@ -727,9 +673,6 @@ int s3c_i2sv2_register_component(struct device *dev, int id,
 	if (!ops->delay)
 		ops->delay = s3c2412_i2s_delay;
 
-	dai_drv->suspend = s3c2412_i2s_suspend;
-	dai_drv->resume = s3c2412_i2s_resume;
-
 	return devm_snd_soc_register_component(dev, cmp_drv, dai_drv, 1);
 }
 EXPORT_SYMBOL_GPL(s3c_i2sv2_register_component);
diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c
index 787a3f6e9f242..b35d828c1cfe9 100644
--- a/sound/soc/samsung/s3c2412-i2s.c
+++ b/sound/soc/samsung/s3c2412-i2s.c
@@ -117,6 +117,60 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int s3c2412_i2s_suspend(struct snd_soc_component *component)
+{
+	struct s3c_i2sv2_info *i2s = snd_soc_component_get_drvdata(component);
+	u32 iismod;
+
+	if (component->active) {
+		i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
+		i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
+		i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
+
+		/* some basic suspend checks */
+
+		iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+		if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
+			pr_warn("%s: RXDMA active?\n", __func__);
+
+		if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
+			pr_warn("%s: TXDMA active?\n", __func__);
+
+		if (iismod & S3C2412_IISCON_IIS_ACTIVE)
+			pr_warn("%s: IIS active\n", __func__);
+	}
+
+	return 0;
+}
+
+static int s3c2412_i2s_resume(struct snd_soc_component *component)
+{
+	struct s3c_i2sv2_info *i2s = snd_soc_component_get_drvdata(component);
+
+	pr_info("component_active %d, IISMOD %08x, IISCON %08x\n",
+		component->active, i2s->suspend_iismod, i2s->suspend_iiscon);
+
+	if (component->active) {
+		writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
+		writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
+		writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
+
+		writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
+		       i2s->regs + S3C2412_IISFIC);
+
+		ndelay(250);
+		writel(0x0, i2s->regs + S3C2412_IISFIC);
+	}
+
+	return 0;
+}
+#else
+#define s3c2412_i2s_suspend NULL
+#define s3c2412_i2s_resume  NULL
+#endif
+
 #define S3C2412_I2S_RATES \
 	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
 	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
@@ -146,6 +200,8 @@ static struct snd_soc_dai_driver s3c2412_i2s_dai = {
 
 static const struct snd_soc_component_driver s3c2412_i2s_component = {
 	.name		= "s3c2412-i2s",
+	.suspend	= s3c2412_i2s_suspend,
+	.resume		= s3c2412_i2s_resume,
 };
 
 static int s3c2412_iis_dev_probe(struct platform_device *pdev)
-- 
2.20.1

[PATCH AUTOSEL 5.6 17/79] ASoC: samsung: s3c24xx-i2s: Fix build after removal of DAI suspend/resume

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit ec21bdc6dd16d74b3674ef1fd12ae8e4e7418603 ]

Commit 450312b640f9 ("ASoC: soc-core: remove DAI suspend/resume")
removed the DAI side suspend/resume hooks and switched entirely to
component suspend/resume.  However the Samsung SoC s3c-i2s-v2 driver was
not updated.

Move the suspend/resume hooks from s3c-i2s-v2.c to s3c2412-i2s.c while
changing dai to component which allows to keep the struct
snd_soc_component_driver const.

This fixes build errors:

    sound/soc/samsung/s3c-i2s-v2.c: In function ‘s3c_i2sv2_register_component’:
    sound/soc/samsung/s3c-i2s-v2.c:730:9: error: ‘struct snd_soc_dai_driver’ has no member named ‘suspend’
      dai_drv->suspend = s3c2412_i2s_suspend;

Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 450312b640f9 ("ASoC: soc-core: remove DAI suspend/resume")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Link: https://lore.kernel.org/r/20200413124548.28197-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/samsung/s3c-i2s-v2.c  | 57 ---------------------------------
 sound/soc/samsung/s3c2412-i2s.c | 56 ++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+), 57 deletions(-)

diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
index 593be1b668d64..b3e12d6a78a19 100644
--- a/sound/soc/samsung/s3c-i2s-v2.c
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -656,60 +656,6 @@ void s3c_i2sv2_cleanup(struct snd_soc_dai *dai,
 }
 EXPORT_SYMBOL_GPL(s3c_i2sv2_cleanup);
 
-#ifdef CONFIG_PM
-static int s3c2412_i2s_suspend(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = to_info(dai);
-	u32 iismod;
-
-	if (dai->active) {
-		i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
-		i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
-		i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
-
-		/* some basic suspend checks */
-
-		iismod = readl(i2s->regs + S3C2412_IISMOD);
-
-		if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
-			pr_warn("%s: RXDMA active?\n", __func__);
-
-		if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
-			pr_warn("%s: TXDMA active?\n", __func__);
-
-		if (iismod & S3C2412_IISCON_IIS_ACTIVE)
-			pr_warn("%s: IIS active\n", __func__);
-	}
-
-	return 0;
-}
-
-static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = to_info(dai);
-
-	pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n",
-		dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
-
-	if (dai->active) {
-		writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
-		writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
-		writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
-
-		writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
-		       i2s->regs + S3C2412_IISFIC);
-
-		ndelay(250);
-		writel(0x0, i2s->regs + S3C2412_IISFIC);
-	}
-
-	return 0;
-}
-#else
-#define s3c2412_i2s_suspend NULL
-#define s3c2412_i2s_resume  NULL
-#endif
-
 int s3c_i2sv2_register_component(struct device *dev, int id,
 			   const struct snd_soc_component_driver *cmp_drv,
 			   struct snd_soc_dai_driver *dai_drv)
@@ -727,9 +673,6 @@ int s3c_i2sv2_register_component(struct device *dev, int id,
 	if (!ops->delay)
 		ops->delay = s3c2412_i2s_delay;
 
-	dai_drv->suspend = s3c2412_i2s_suspend;
-	dai_drv->resume = s3c2412_i2s_resume;
-
 	return devm_snd_soc_register_component(dev, cmp_drv, dai_drv, 1);
 }
 EXPORT_SYMBOL_GPL(s3c_i2sv2_register_component);
diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c
index 787a3f6e9f242..b35d828c1cfe9 100644
--- a/sound/soc/samsung/s3c2412-i2s.c
+++ b/sound/soc/samsung/s3c2412-i2s.c
@@ -117,6 +117,60 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int s3c2412_i2s_suspend(struct snd_soc_component *component)
+{
+	struct s3c_i2sv2_info *i2s = snd_soc_component_get_drvdata(component);
+	u32 iismod;
+
+	if (component->active) {
+		i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
+		i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
+		i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
+
+		/* some basic suspend checks */
+
+		iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+		if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
+			pr_warn("%s: RXDMA active?\n", __func__);
+
+		if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
+			pr_warn("%s: TXDMA active?\n", __func__);
+
+		if (iismod & S3C2412_IISCON_IIS_ACTIVE)
+			pr_warn("%s: IIS active\n", __func__);
+	}
+
+	return 0;
+}
+
+static int s3c2412_i2s_resume(struct snd_soc_component *component)
+{
+	struct s3c_i2sv2_info *i2s = snd_soc_component_get_drvdata(component);
+
+	pr_info("component_active %d, IISMOD %08x, IISCON %08x\n",
+		component->active, i2s->suspend_iismod, i2s->suspend_iiscon);
+
+	if (component->active) {
+		writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
+		writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
+		writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
+
+		writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
+		       i2s->regs + S3C2412_IISFIC);
+
+		ndelay(250);
+		writel(0x0, i2s->regs + S3C2412_IISFIC);
+	}
+
+	return 0;
+}
+#else
+#define s3c2412_i2s_suspend NULL
+#define s3c2412_i2s_resume  NULL
+#endif
+
 #define S3C2412_I2S_RATES \
 	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
 	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
@@ -146,6 +200,8 @@ static struct snd_soc_dai_driver s3c2412_i2s_dai = {
 
 static const struct snd_soc_component_driver s3c2412_i2s_component = {
 	.name		= "s3c2412-i2s",
+	.suspend	= s3c2412_i2s_suspend,
+	.resume		= s3c2412_i2s_resume,
 };
 
 static int s3c2412_iis_dev_probe(struct platform_device *pdev)
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 17/79] ASoC: samsung: s3c24xx-i2s: Fix build after removal of DAI suspend/resume

[Sasha Levin]

From: Krzysztof Kozlowski <krzk@kernel.org>

[ Upstream commit ec21bdc6dd16d74b3674ef1fd12ae8e4e7418603 ]

Commit 450312b640f9 ("ASoC: soc-core: remove DAI suspend/resume")
removed the DAI side suspend/resume hooks and switched entirely to
component suspend/resume.  However the Samsung SoC s3c-i2s-v2 driver was
not updated.

Move the suspend/resume hooks from s3c-i2s-v2.c to s3c2412-i2s.c while
changing dai to component which allows to keep the struct
snd_soc_component_driver const.

This fixes build errors:

    sound/soc/samsung/s3c-i2s-v2.c: In function ‘s3c_i2sv2_register_component’:
    sound/soc/samsung/s3c-i2s-v2.c:730:9: error: ‘struct snd_soc_dai_driver’ has no member named ‘suspend’
      dai_drv->suspend = s3c2412_i2s_suspend;

Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 450312b640f9 ("ASoC: soc-core: remove DAI suspend/resume")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Link: https://lore.kernel.org/r/20200413124548.28197-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/samsung/s3c-i2s-v2.c  | 57 ---------------------------------
 sound/soc/samsung/s3c2412-i2s.c | 56 ++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+), 57 deletions(-)

diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
index 593be1b668d64..b3e12d6a78a19 100644
--- a/sound/soc/samsung/s3c-i2s-v2.c
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -656,60 +656,6 @@ void s3c_i2sv2_cleanup(struct snd_soc_dai *dai,
 }
 EXPORT_SYMBOL_GPL(s3c_i2sv2_cleanup);
 
-#ifdef CONFIG_PM
-static int s3c2412_i2s_suspend(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = to_info(dai);
-	u32 iismod;
-
-	if (dai->active) {
-		i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
-		i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
-		i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
-
-		/* some basic suspend checks */
-
-		iismod = readl(i2s->regs + S3C2412_IISMOD);
-
-		if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
-			pr_warn("%s: RXDMA active?\n", __func__);
-
-		if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
-			pr_warn("%s: TXDMA active?\n", __func__);
-
-		if (iismod & S3C2412_IISCON_IIS_ACTIVE)
-			pr_warn("%s: IIS active\n", __func__);
-	}
-
-	return 0;
-}
-
-static int s3c2412_i2s_resume(struct snd_soc_dai *dai)
-{
-	struct s3c_i2sv2_info *i2s = to_info(dai);
-
-	pr_info("dai_active %d, IISMOD %08x, IISCON %08x\n",
-		dai->active, i2s->suspend_iismod, i2s->suspend_iiscon);
-
-	if (dai->active) {
-		writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
-		writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
-		writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
-
-		writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
-		       i2s->regs + S3C2412_IISFIC);
-
-		ndelay(250);
-		writel(0x0, i2s->regs + S3C2412_IISFIC);
-	}
-
-	return 0;
-}
-#else
-#define s3c2412_i2s_suspend NULL
-#define s3c2412_i2s_resume  NULL
-#endif
-
 int s3c_i2sv2_register_component(struct device *dev, int id,
 			   const struct snd_soc_component_driver *cmp_drv,
 			   struct snd_soc_dai_driver *dai_drv)
@@ -727,9 +673,6 @@ int s3c_i2sv2_register_component(struct device *dev, int id,
 	if (!ops->delay)
 		ops->delay = s3c2412_i2s_delay;
 
-	dai_drv->suspend = s3c2412_i2s_suspend;
-	dai_drv->resume = s3c2412_i2s_resume;
-
 	return devm_snd_soc_register_component(dev, cmp_drv, dai_drv, 1);
 }
 EXPORT_SYMBOL_GPL(s3c_i2sv2_register_component);
diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c
index 787a3f6e9f242..b35d828c1cfe9 100644
--- a/sound/soc/samsung/s3c2412-i2s.c
+++ b/sound/soc/samsung/s3c2412-i2s.c
@@ -117,6 +117,60 @@ static int s3c2412_i2s_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int s3c2412_i2s_suspend(struct snd_soc_component *component)
+{
+	struct s3c_i2sv2_info *i2s = snd_soc_component_get_drvdata(component);
+	u32 iismod;
+
+	if (component->active) {
+		i2s->suspend_iismod = readl(i2s->regs + S3C2412_IISMOD);
+		i2s->suspend_iiscon = readl(i2s->regs + S3C2412_IISCON);
+		i2s->suspend_iispsr = readl(i2s->regs + S3C2412_IISPSR);
+
+		/* some basic suspend checks */
+
+		iismod = readl(i2s->regs + S3C2412_IISMOD);
+
+		if (iismod & S3C2412_IISCON_RXDMA_ACTIVE)
+			pr_warn("%s: RXDMA active?\n", __func__);
+
+		if (iismod & S3C2412_IISCON_TXDMA_ACTIVE)
+			pr_warn("%s: TXDMA active?\n", __func__);
+
+		if (iismod & S3C2412_IISCON_IIS_ACTIVE)
+			pr_warn("%s: IIS active\n", __func__);
+	}
+
+	return 0;
+}
+
+static int s3c2412_i2s_resume(struct snd_soc_component *component)
+{
+	struct s3c_i2sv2_info *i2s = snd_soc_component_get_drvdata(component);
+
+	pr_info("component_active %d, IISMOD %08x, IISCON %08x\n",
+		component->active, i2s->suspend_iismod, i2s->suspend_iiscon);
+
+	if (component->active) {
+		writel(i2s->suspend_iiscon, i2s->regs + S3C2412_IISCON);
+		writel(i2s->suspend_iismod, i2s->regs + S3C2412_IISMOD);
+		writel(i2s->suspend_iispsr, i2s->regs + S3C2412_IISPSR);
+
+		writel(S3C2412_IISFIC_RXFLUSH | S3C2412_IISFIC_TXFLUSH,
+		       i2s->regs + S3C2412_IISFIC);
+
+		ndelay(250);
+		writel(0x0, i2s->regs + S3C2412_IISFIC);
+	}
+
+	return 0;
+}
+#else
+#define s3c2412_i2s_suspend NULL
+#define s3c2412_i2s_resume  NULL
+#endif
+
 #define S3C2412_I2S_RATES \
 	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
 	SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
@@ -146,6 +200,8 @@ static struct snd_soc_dai_driver s3c2412_i2s_dai = {
 
 static const struct snd_soc_component_driver s3c2412_i2s_component = {
 	.name		= "s3c2412-i2s",
+	.suspend	= s3c2412_i2s_suspend,
+	.resume		= s3c2412_i2s_resume,
 };
 
 static int s3c2412_iis_dev_probe(struct platform_device *pdev)
-- 
2.20.1

[PATCH AUTOSEL 5.6 18/79] Revert "Kernel selftests: tpm2: check for tpm support"

[Sasha Levin]

From: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

[ Upstream commit aaa2d92efe1f972567f1691b423ab8dc606ab3a9 ]

This reverts commit b32694cd0724d4ceca2c62cc7c3d3a8d1ffa11fc.

The original comment was neither reviewed nor tested. Thus, this the
*only* possible action to take.

Cc: Nikita Sobolev <Nikita.Sobolev@synopsys.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/tpm2/test_smoke.sh | 13 ++-----------
 tools/testing/selftests/tpm2/test_space.sh |  9 +--------
 2 files changed, 3 insertions(+), 19 deletions(-)

diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh
index b630c7b5950a9..8155c2ea7ccbb 100755
--- a/tools/testing/selftests/tpm2/test_smoke.sh
+++ b/tools/testing/selftests/tpm2/test_smoke.sh
@@ -1,17 +1,8 @@
 #!/bin/bash
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
-self.flags = flags
 
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
-
-if [ -f /dev/tpm0 ] ; then
-	python -m unittest -v tpm2_tests.SmokeTest
-	python -m unittest -v tpm2_tests.AsyncTest
-else
-	exit $ksft_skip
-fi
+python -m unittest -v tpm2_tests.SmokeTest
+python -m unittest -v tpm2_tests.AsyncTest
 
 CLEAR_CMD=$(which tpm2_clear)
 if [ -n $CLEAR_CMD ]; then
diff --git a/tools/testing/selftests/tpm2/test_space.sh b/tools/testing/selftests/tpm2/test_space.sh
index 180b469c53b47..a6f5e346635e5 100755
--- a/tools/testing/selftests/tpm2/test_space.sh
+++ b/tools/testing/selftests/tpm2/test_space.sh
@@ -1,11 +1,4 @@
 #!/bin/bash
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 
-# Kselftest framework requirement - SKIP code is 4.
-ksft_skip=4
-
-if [ -f /dev/tpmrm0 ] ; then
-	python -m unittest -v tpm2_tests.SpaceTest
-else
-	exit $ksft_skip
-fi
+python -m unittest -v tpm2_tests.SpaceTest
-- 
2.20.1

[PATCH AUTOSEL 5.6 19/79] selftests/ipc: Fix test failure seen after initial test run

[Sasha Levin]

From: Tyler Hicks <tyhicks@linux.microsoft.com>

[ Upstream commit b87080eab4c1377706c113fc9c0157f19ea8fed1 ]

After successfully running the IPC msgque test once, subsequent runs
result in a test failure:

  $ sudo ./run_kselftest.sh
  TAP version 13
  1..1
  # selftests: ipc: msgque
  # Failed to get stats for IPC queue with id 0
  # Failed to dump queue: -22
  # Bail out!
  # # Pass 0 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
  not ok 1 selftests: ipc: msgque # exit=1

The dump_queue() function loops through the possible message queue index
values using calls to msgctl(kern_id, MSG_STAT, ...) where kern_id
represents the index value. The first time the test is ran, the initial
index value of 0 is valid and the test is able to complete. The index
value of 0 is not valid in subsequent test runs and the loop attempts to
try index values of 1, 2, 3, and so on until a valid index value is
found that corresponds to the message queue created earlier in the test.

The msgctl() syscall returns -1 and sets errno to EINVAL when invalid
index values are used. The test failure is caused by incorrectly
comparing errno to -EINVAL when cycling through possible index values.

Fix invalid test failures on subsequent runs of the msgque test by
correctly comparing errno values to a non-negated EINVAL.

Fixes: 3a665531a3b7 ("selftests: IPC message queue copy feature test")
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/testing/selftests/ipc/msgque.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/ipc/msgque.c b/tools/testing/selftests/ipc/msgque.c
index 4c156aeab6b80..5ec4d9e18806c 100644
--- a/tools/testing/selftests/ipc/msgque.c
+++ b/tools/testing/selftests/ipc/msgque.c
@@ -137,7 +137,7 @@ int dump_queue(struct msgque_data *msgque)
 	for (kern_id = 0; kern_id < 256; kern_id++) {
 		ret = msgctl(kern_id, MSG_STAT, &ds);
 		if (ret < 0) {
-			if (errno == -EINVAL)
+			if (errno == EINVAL)
 				continue;
 			printf("Failed to get stats for IPC queue with id %d\n",
 					kern_id);
-- 
2.20.1

[PATCH AUTOSEL 5.6 20/79] drm/bridge: anx6345: set correct BPC for display_info of connector

[Sasha Levin]

From: Vasily Khoruzhick <anarsoul@gmail.com>

[ Upstream commit 1e8a6ce9186dbf342eebc07cf14cae5e82164e03 ]

Some drivers (e.g. sun4i-drm) need this info to decide whether they
need to enable dithering. Currently driver reports what panel supports
and if panel supports 8 we don't get dithering enabled.

Hardcode BPC to 6 for now since that's the only BPC
that driver supports.

Fixes: 6aa192698089 ("drm/bridge: Add Analogix anx6345 support")
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200329222253.2941405-1-anarsoul@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
index 526507102c1ea..8d32fea84c75e 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
@@ -485,6 +485,9 @@ static int anx6345_get_modes(struct drm_connector *connector)
 
 	num_modes += drm_add_edid_modes(connector, anx6345->edid);
 
+	/* Driver currently supports only 6bpc */
+	connector->display_info.bpc = 6;
+
 unlock:
 	if (power_off)
 		anx6345_poweroff(anx6345);
-- 
2.20.1

[PATCH AUTOSEL 5.6 20/79] drm/bridge: anx6345: set correct BPC for display_info of connector

[Sasha Levin]

From: Vasily Khoruzhick <anarsoul@gmail.com>

[ Upstream commit 1e8a6ce9186dbf342eebc07cf14cae5e82164e03 ]

Some drivers (e.g. sun4i-drm) need this info to decide whether they
need to enable dithering. Currently driver reports what panel supports
and if panel supports 8 we don't get dithering enabled.

Hardcode BPC to 6 for now since that's the only BPC
that driver supports.

Fixes: 6aa192698089 ("drm/bridge: Add Analogix anx6345 support")
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200329222253.2941405-1-anarsoul@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
index 526507102c1ea..8d32fea84c75e 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
@@ -485,6 +485,9 @@ static int anx6345_get_modes(struct drm_connector *connector)
 
 	num_modes += drm_add_edid_modes(connector, anx6345->edid);
 
+	/* Driver currently supports only 6bpc */
+	connector->display_info.bpc = 6;
+
 unlock:
 	if (power_off)
 		anx6345_poweroff(anx6345);
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 21/79] scsi: sg: add sg_remove_request in sg_write

[Sasha Levin]

From: Wu Bo <wubo40@huawei.com>

[ Upstream commit 83c6f2390040f188cc25b270b4befeb5628c1aee ]

If the __copy_from_user function failed we need to call sg_remove_request
in sg_write.

Link: https://lore.kernel.org/r/610618d9-e983-fd56-ed0f-639428343af7@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sg.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 9c0ee192f0f9c..20472aaaf630a 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -685,8 +685,10 @@ sg_write(struct file *filp, const char __user *buf, size_t count, loff_t * ppos)
 	hp->flags = input_size;	/* structure abuse ... */
 	hp->pack_id = old_hdr.pack_id;
 	hp->usr_ptr = NULL;
-	if (copy_from_user(cmnd, buf, cmd_size))
+	if (copy_from_user(cmnd, buf, cmd_size)) {
+		sg_remove_request(sfp, srp);
 		return -EFAULT;
+	}
 	/*
 	 * SG_DXFER_TO_FROM_DEV is functionally equivalent to SG_DXFER_FROM_DEV,
 	 * but is is possible that the app intended SG_DXFER_TO_DEV, because there
-- 
2.20.1

[PATCH AUTOSEL 5.6 22/79] drivers: soc: xilinx: fix firmware driver Kconfig dependency

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit d0384eedcde21276ac51f57c641f875605024b32 ]

The firmware driver is optional, but the power driver depends on it,
which needs to be reflected in Kconfig to avoid link errors:

aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr':
zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn'

The firmware driver can probably be allowed for compile-testing as
well, so it's best to drop the dependency on the ZYNQ platform
here and allow building as long as the firmware code is built-in.

Fixes: ab272643d723 ("drivers: soc: xilinx: Add ZynqMP PM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200408155224.2070880-1-arnd@arndb.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/xilinx/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 223f1f9d0922f..646512d7276f4 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -19,7 +19,7 @@ config XILINX_VCU
 
 config ZYNQMP_POWER
 	bool "Enable Xilinx Zynq MPSoC Power Management driver"
-	depends on PM && ARCH_ZYNQMP
+	depends on PM && ZYNQMP_FIRMWARE
 	default y
 	select MAILBOX
 	select ZYNQMP_IPI_MBOX
@@ -35,7 +35,7 @@ config ZYNQMP_POWER
 config ZYNQMP_PM_DOMAINS
 	bool "Enable Zynq MPSoC generic PM domains"
 	default y
-	depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
+	depends on PM && ZYNQMP_FIRMWARE
 	select PM_GENERIC_DOMAINS
 	help
 	  Say yes to enable device power management through PM domains
-- 
2.20.1

[PATCH AUTOSEL 5.6 22/79] drivers: soc: xilinx: fix firmware driver Kconfig dependency

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit d0384eedcde21276ac51f57c641f875605024b32 ]

The firmware driver is optional, but the power driver depends on it,
which needs to be reflected in Kconfig to avoid link errors:

aarch64-linux-ld: drivers/soc/xilinx/zynqmp_power.o: in function `zynqmp_pm_isr':
zynqmp_power.c:(.text+0x284): undefined reference to `zynqmp_pm_invoke_fn'

The firmware driver can probably be allowed for compile-testing as
well, so it's best to drop the dependency on the ZYNQ platform
here and allow building as long as the firmware code is built-in.

Fixes: ab272643d723 ("drivers: soc: xilinx: Add ZynqMP PM driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200408155224.2070880-1-arnd@arndb.de
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/xilinx/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/xilinx/Kconfig b/drivers/soc/xilinx/Kconfig
index 223f1f9d0922f..646512d7276f4 100644
--- a/drivers/soc/xilinx/Kconfig
+++ b/drivers/soc/xilinx/Kconfig
@@ -19,7 +19,7 @@ config XILINX_VCU
 
 config ZYNQMP_POWER
 	bool "Enable Xilinx Zynq MPSoC Power Management driver"
-	depends on PM && ARCH_ZYNQMP
+	depends on PM && ZYNQMP_FIRMWARE
 	default y
 	select MAILBOX
 	select ZYNQMP_IPI_MBOX
@@ -35,7 +35,7 @@ config ZYNQMP_POWER
 config ZYNQMP_PM_DOMAINS
 	bool "Enable Zynq MPSoC generic PM domains"
 	default y
-	depends on PM && ARCH_ZYNQMP && ZYNQMP_FIRMWARE
+	depends on PM && ZYNQMP_FIRMWARE
 	select PM_GENERIC_DOMAINS
 	help
 	  Say yes to enable device power management through PM domains
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 23/79] drm/scheduler: fix drm_sched_get_cleanup_job

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 8623b5255ae7ccaf276aac3920787bf575fa6b37 ]

We are racing to initialize sched->thread here, just always check the
current thread.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Link: https://patchwork.freedesktop.org/patch/361303/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/scheduler/sched_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/scheduler/sched_main.c b/drivers/gpu/drm/scheduler/sched_main.c
index 60c4c6a1aac68..75737ec596141 100644
--- a/drivers/gpu/drm/scheduler/sched_main.c
+++ b/drivers/gpu/drm/scheduler/sched_main.c
@@ -687,7 +687,7 @@ drm_sched_get_cleanup_job(struct drm_gpu_scheduler *sched)
 	 */
 	if ((sched->timeout != MAX_SCHEDULE_TIMEOUT &&
 	    !cancel_delayed_work(&sched->work_tdr)) ||
-	    __kthread_should_park(sched->thread))
+	    kthread_should_park())
 		return NULL;
 
 	spin_lock_irqsave(&sched->job_list_lock, flags);
-- 
2.20.1

[PATCH AUTOSEL 5.6 23/79] drm/scheduler: fix drm_sched_get_cleanup_job

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 8623b5255ae7ccaf276aac3920787bf575fa6b37 ]

We are racing to initialize sched->thread here, just always check the
current thread.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Link: https://patchwork.freedesktop.org/patch/361303/
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/scheduler/sched_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/scheduler/sched_main.c b/drivers/gpu/drm/scheduler/sched_main.c
index 60c4c6a1aac68..75737ec596141 100644
--- a/drivers/gpu/drm/scheduler/sched_main.c
+++ b/drivers/gpu/drm/scheduler/sched_main.c
@@ -687,7 +687,7 @@ drm_sched_get_cleanup_job(struct drm_gpu_scheduler *sched)
 	 */
 	if ((sched->timeout != MAX_SCHEDULE_TIMEOUT &&
 	    !cancel_delayed_work(&sched->work_tdr)) ||
-	    __kthread_should_park(sched->thread))
+	    kthread_should_park())
 		return NULL;
 
 	spin_lock_irqsave(&sched->job_list_lock, flags);
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 24/79] ASoC: sgtl5000: Fix VAG power-on handling

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit aa7812737f2877e192d57626cbe8825cc7cf6de9 ]

As mentioned slightly out of patch context in the code, there
is no reset routine for the chip. On boards where the chip is
supplied by a fixed regulator, it might not even be resetted
during (e.g. watchdog) reboot and can be in any state.

If the device is probed with VAG enabled, the driver's probe
routine will generate a loud pop sound when ANA_POWER is
being programmed. Avoid this by properly disabling just the
VAG bit and waiting the required power down time.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Fabio Estevam <festivem@gmail.com>
Link: https://lore.kernel.org/r/20200414181140.145825-1-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/sgtl5000.c | 34 ++++++++++++++++++++++++++++++++++
 sound/soc/codecs/sgtl5000.h |  1 +
 2 files changed, 35 insertions(+)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index d5130193b4a2f..e8a8bf7b4ffed 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1653,6 +1653,40 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
 		dev_err(&client->dev,
 			"Error %d initializing CHIP_CLK_CTRL\n", ret);
 
+	/* Mute everything to avoid pop from the following power-up */
+	ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_CTRL,
+			   SGTL5000_CHIP_ANA_CTRL_DEFAULT);
+	if (ret) {
+		dev_err(&client->dev,
+			"Error %d muting outputs via CHIP_ANA_CTRL\n", ret);
+		goto disable_clk;
+	}
+
+	/*
+	 * If VAG is powered-on (e.g. from previous boot), it would be disabled
+	 * by the write to ANA_POWER in later steps of the probe code. This
+	 * may create a loud pop even with all outputs muted. The proper way
+	 * to circumvent this is disabling the bit first and waiting the proper
+	 * cool-down time.
+	 */
+	ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, &value);
+	if (ret) {
+		dev_err(&client->dev, "Failed to read ANA_POWER: %d\n", ret);
+		goto disable_clk;
+	}
+	if (value & SGTL5000_VAG_POWERUP) {
+		ret = regmap_update_bits(sgtl5000->regmap,
+					 SGTL5000_CHIP_ANA_POWER,
+					 SGTL5000_VAG_POWERUP,
+					 0);
+		if (ret) {
+			dev_err(&client->dev, "Error %d disabling VAG\n", ret);
+			goto disable_clk;
+		}
+
+		msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+	}
+
 	/* Follow section 2.2.1.1 of AN3663 */
 	ana_pwr = SGTL5000_ANA_POWER_DEFAULT;
 	if (sgtl5000->num_supplies <= VDDD) {
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
index a4bf4bca95bf7..56ec5863f2507 100644
--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -233,6 +233,7 @@
 /*
  * SGTL5000_CHIP_ANA_CTRL
  */
+#define SGTL5000_CHIP_ANA_CTRL_DEFAULT		0x0133
 #define SGTL5000_LINE_OUT_MUTE			0x0100
 #define SGTL5000_HP_SEL_MASK			0x0040
 #define SGTL5000_HP_SEL_SHIFT			6
-- 
2.20.1

[PATCH AUTOSEL 5.6 24/79] ASoC: sgtl5000: Fix VAG power-on handling

[Sasha Levin]

From: Sebastian Reichel <sebastian.reichel@collabora.com>

[ Upstream commit aa7812737f2877e192d57626cbe8825cc7cf6de9 ]

As mentioned slightly out of patch context in the code, there
is no reset routine for the chip. On boards where the chip is
supplied by a fixed regulator, it might not even be resetted
during (e.g. watchdog) reboot and can be in any state.

If the device is probed with VAG enabled, the driver's probe
routine will generate a loud pop sound when ANA_POWER is
being programmed. Avoid this by properly disabling just the
VAG bit and waiting the required power down time.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Fabio Estevam <festivem@gmail.com>
Link: https://lore.kernel.org/r/20200414181140.145825-1-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/sgtl5000.c | 34 ++++++++++++++++++++++++++++++++++
 sound/soc/codecs/sgtl5000.h |  1 +
 2 files changed, 35 insertions(+)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index d5130193b4a2f..e8a8bf7b4ffed 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1653,6 +1653,40 @@ static int sgtl5000_i2c_probe(struct i2c_client *client,
 		dev_err(&client->dev,
 			"Error %d initializing CHIP_CLK_CTRL\n", ret);
 
+	/* Mute everything to avoid pop from the following power-up */
+	ret = regmap_write(sgtl5000->regmap, SGTL5000_CHIP_ANA_CTRL,
+			   SGTL5000_CHIP_ANA_CTRL_DEFAULT);
+	if (ret) {
+		dev_err(&client->dev,
+			"Error %d muting outputs via CHIP_ANA_CTRL\n", ret);
+		goto disable_clk;
+	}
+
+	/*
+	 * If VAG is powered-on (e.g. from previous boot), it would be disabled
+	 * by the write to ANA_POWER in later steps of the probe code. This
+	 * may create a loud pop even with all outputs muted. The proper way
+	 * to circumvent this is disabling the bit first and waiting the proper
+	 * cool-down time.
+	 */
+	ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ANA_POWER, &value);
+	if (ret) {
+		dev_err(&client->dev, "Failed to read ANA_POWER: %d\n", ret);
+		goto disable_clk;
+	}
+	if (value & SGTL5000_VAG_POWERUP) {
+		ret = regmap_update_bits(sgtl5000->regmap,
+					 SGTL5000_CHIP_ANA_POWER,
+					 SGTL5000_VAG_POWERUP,
+					 0);
+		if (ret) {
+			dev_err(&client->dev, "Error %d disabling VAG\n", ret);
+			goto disable_clk;
+		}
+
+		msleep(SGTL5000_VAG_POWERDOWN_DELAY);
+	}
+
 	/* Follow section 2.2.1.1 of AN3663 */
 	ana_pwr = SGTL5000_ANA_POWER_DEFAULT;
 	if (sgtl5000->num_supplies <= VDDD) {
diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h
index a4bf4bca95bf7..56ec5863f2507 100644
--- a/sound/soc/codecs/sgtl5000.h
+++ b/sound/soc/codecs/sgtl5000.h
@@ -233,6 +233,7 @@
 /*
  * SGTL5000_CHIP_ANA_CTRL
  */
+#define SGTL5000_CHIP_ANA_CTRL_DEFAULT		0x0133
 #define SGTL5000_LINE_OUT_MUTE			0x0100
 #define SGTL5000_HP_SEL_MASK			0x0040
 #define SGTL5000_HP_SEL_SHIFT			6
-- 
2.20.1

[PATCH AUTOSEL 5.6 25/79] ASoC: q6dsp6: q6afe-dai: add missing channels to MI2S DAIs

[Sasha Levin]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 0c824ec094b5cda766c80d88c2036e28c24a4cb1 ]

For some reason, the MI2S DAIs do not have channels_min/max defined.
This means that snd_soc_dai_stream_valid() returns false,
i.e. the DAIs have neither valid playback nor capture stream.

It's quite surprising that this ever worked correctly,
but in 5.7-rc1 this is now failing badly: :)

Commit 0e9cf4c452ad ("ASoC: pcm: check if cpu-dai supports a given stream")
introduced a check for snd_soc_dai_stream_valid() before calling
hw_params(), which means that the q6i2s_hw_params() function
was never called, eventually resulting in:

    qcom-q6afe aprsvc:q6afe:4:4: no line is assigned

... even though "qcom,sd-lines" is set in the device tree.

Commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
now even avoids creating PCM devices if the stream is not supported,
which means that it is failing even earlier with e.g.:

    Primary MI2S: ASoC: no backend playback stream

Avoid all that trouble by adding channels_min/max for the MI2S DAIs.

Fixes: 24c4cbcfac09 ("ASoC: qdsp6: q6afe: Add q6afe dai driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200415150050.616392-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/qcom/qdsp6/q6afe-dai.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c
index c1a7624eaf175..2a5302f1db98a 100644
--- a/sound/soc/qcom/qdsp6/q6afe-dai.c
+++ b/sound/soc/qcom/qdsp6/q6afe-dai.c
@@ -902,6 +902,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE |
 				   SNDRV_PCM_FMTBIT_S24_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -917,6 +919,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE |
 				   SNDRV_PCM_FMTBIT_S24_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -931,6 +935,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 			.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -946,6 +952,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE |
 				   SNDRV_PCM_FMTBIT_S24_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -960,6 +968,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 			.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -975,6 +985,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE |
 				   SNDRV_PCM_FMTBIT_S24_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -989,6 +1001,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 			.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -1004,6 +1018,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE |
 				   SNDRV_PCM_FMTBIT_S24_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
-- 
2.20.1

[PATCH AUTOSEL 5.6 25/79] ASoC: q6dsp6: q6afe-dai: add missing channels to MI2S DAIs

[Sasha Levin]

From: Stephan Gerhold <stephan@gerhold.net>

[ Upstream commit 0c824ec094b5cda766c80d88c2036e28c24a4cb1 ]

For some reason, the MI2S DAIs do not have channels_min/max defined.
This means that snd_soc_dai_stream_valid() returns false,
i.e. the DAIs have neither valid playback nor capture stream.

It's quite surprising that this ever worked correctly,
but in 5.7-rc1 this is now failing badly: :)

Commit 0e9cf4c452ad ("ASoC: pcm: check if cpu-dai supports a given stream")
introduced a check for snd_soc_dai_stream_valid() before calling
hw_params(), which means that the q6i2s_hw_params() function
was never called, eventually resulting in:

    qcom-q6afe aprsvc:q6afe:4:4: no line is assigned

... even though "qcom,sd-lines" is set in the device tree.

Commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
now even avoids creating PCM devices if the stream is not supported,
which means that it is failing even earlier with e.g.:

    Primary MI2S: ASoC: no backend playback stream

Avoid all that trouble by adding channels_min/max for the MI2S DAIs.

Fixes: 24c4cbcfac09 ("ASoC: qdsp6: q6afe: Add q6afe dai driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200415150050.616392-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/qcom/qdsp6/q6afe-dai.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c
index c1a7624eaf175..2a5302f1db98a 100644
--- a/sound/soc/qcom/qdsp6/q6afe-dai.c
+++ b/sound/soc/qcom/qdsp6/q6afe-dai.c
@@ -902,6 +902,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE |
 				   SNDRV_PCM_FMTBIT_S24_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -917,6 +919,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE |
 				   SNDRV_PCM_FMTBIT_S24_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -931,6 +935,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 			.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -946,6 +952,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE |
 				   SNDRV_PCM_FMTBIT_S24_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -960,6 +968,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 			.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -975,6 +985,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE |
 				   SNDRV_PCM_FMTBIT_S24_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -989,6 +1001,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 			.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_8000 |
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
@@ -1004,6 +1018,8 @@ static struct snd_soc_dai_driver q6afe_dais[] = {
 				 SNDRV_PCM_RATE_16000,
 			.formats = SNDRV_PCM_FMTBIT_S16_LE |
 				   SNDRV_PCM_FMTBIT_S24_LE,
+			.channels_min = 1,
+			.channels_max = 8,
 			.rate_min =     8000,
 			.rate_max =     48000,
 		},
-- 
2.20.1

[PATCH AUTOSEL 5.6 26/79] ASoC: topology: Fix endianness issue

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 26d87881590fd55ccdd8f829498d7b3033f81990 ]

As done in already existing cases, we should use le32_to_cpu macro while
accessing hdr->magic. Found with sparse.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415162435.31859-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index e6a17ab433eea..009d65a6fb43a 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2652,7 +2652,7 @@ static int soc_valid_header(struct soc_tplg *tplg,
 	}
 
 	/* big endian firmware objects not supported atm */
-	if (hdr->magic == SOC_TPLG_MAGIC_BIG_ENDIAN) {
+	if (le32_to_cpu(hdr->magic) == SOC_TPLG_MAGIC_BIG_ENDIAN) {
 		dev_err(tplg->dev,
 			"ASoC: pass %d big endian not supported header got %x at offset 0x%lx size 0x%zx.\n",
 			tplg->pass, hdr->magic,
-- 
2.20.1

[PATCH AUTOSEL 5.6 26/79] ASoC: topology: Fix endianness issue

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 26d87881590fd55ccdd8f829498d7b3033f81990 ]

As done in already existing cases, we should use le32_to_cpu macro while
accessing hdr->magic. Found with sparse.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415162435.31859-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-topology.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/soc-topology.c b/sound/soc/soc-topology.c
index e6a17ab433eea..009d65a6fb43a 100644
--- a/sound/soc/soc-topology.c
+++ b/sound/soc/soc-topology.c
@@ -2652,7 +2652,7 @@ static int soc_valid_header(struct soc_tplg *tplg,
 	}
 
 	/* big endian firmware objects not supported atm */
-	if (hdr->magic == SOC_TPLG_MAGIC_BIG_ENDIAN) {
+	if (le32_to_cpu(hdr->magic) == SOC_TPLG_MAGIC_BIG_ENDIAN) {
 		dev_err(tplg->dev,
 			"ASoC: pass %d big endian not supported header got %x at offset 0x%lx size 0x%zx.\n",
 			tplg->pass, hdr->magic,
-- 
2.20.1

[PATCH AUTOSEL 5.6 27/79] usb: dwc3: gadget: Properly set maxpacket limit

[Sasha Levin]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit d94ea5319813658ad5861d161ae16a194c2abf88 ]

Currently the calculation of max packet size limit for IN endpoints is
too restrictive. This prevents a matching of a capable hardware endpoint
during configuration. Below is the minimum recommended HW configuration
to support a particular endpoint setup from the databook:

For OUT endpoints, the databook recommended the minimum RxFIFO size to
be at least 3x MaxPacketSize + 3x setup packets size (8 bytes each) +
clock crossing margin (16 bytes).

For IN endpoints, the databook recommended the minimum TxFIFO size to be
at least 3x MaxPacketSize for endpoints that support burst. If the
endpoint doesn't support burst or when the device is operating in USB
2.0 mode, a minimum TxFIFO size of 2x MaxPacketSize is recommended.

Base on these recommendations, we can calculate the MaxPacketSize limit
of each endpoint. This patch revises the IN endpoint MaxPacketSize limit
and also sets the MaxPacketSize limit for OUT endpoints.

Reference: Databook 3.30a section 3.2.2 and 3.2.3

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/core.h   |  4 +++
 drivers/usb/dwc3/gadget.c | 52 ++++++++++++++++++++++++++++++---------
 2 files changed, 45 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 3ecc69c5b150f..ce4acbf7fef90 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -310,6 +310,10 @@
 #define DWC3_GTXFIFOSIZ_TXFDEF(n)	((n) & 0xffff)
 #define DWC3_GTXFIFOSIZ_TXFSTADDR(n)	((n) & 0xffff0000)
 
+/* Global RX Fifo Size Register */
+#define DWC31_GRXFIFOSIZ_RXFDEP(n)	((n) & 0x7fff)	/* DWC_usb31 only */
+#define DWC3_GRXFIFOSIZ_RXFDEP(n)	((n) & 0xffff)
+
 /* Global Event Size Registers */
 #define DWC3_GEVNTSIZ_INTMASK		BIT(31)
 #define DWC3_GEVNTSIZ_SIZE(n)		((n) & 0xffff)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 9460d42f86757..1e68c90a83781 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2227,7 +2227,6 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 {
 	struct dwc3 *dwc = dep->dwc;
 	int mdwidth;
-	int kbytes;
 	int size;
 
 	mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
@@ -2243,17 +2242,17 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 	/* FIFO Depth is in MDWDITH bytes. Multiply */
 	size *= mdwidth;
 
-	kbytes = size / 1024;
-	if (kbytes == 0)
-		kbytes = 1;
-
 	/*
-	 * FIFO sizes account an extra MDWIDTH * (kbytes + 1) bytes for
-	 * internal overhead. We don't really know how these are used,
-	 * but documentation say it exists.
+	 * To meet performance requirement, a minimum TxFIFO size of 3x
+	 * MaxPacketSize is recommended for endpoints that support burst and a
+	 * minimum TxFIFO size of 2x MaxPacketSize for endpoints that don't
+	 * support burst. Use those numbers and we can calculate the max packet
+	 * limit as below.
 	 */
-	size -= mdwidth * (kbytes + 1);
-	size /= kbytes;
+	if (dwc->maximum_speed >= USB_SPEED_SUPER)
+		size /= 3;
+	else
+		size /= 2;
 
 	usb_ep_set_maxpacket_limit(&dep->endpoint, size);
 
@@ -2271,8 +2270,39 @@ static int dwc3_gadget_init_in_endpoint(struct dwc3_ep *dep)
 static int dwc3_gadget_init_out_endpoint(struct dwc3_ep *dep)
 {
 	struct dwc3 *dwc = dep->dwc;
+	int mdwidth;
+	int size;
+
+	mdwidth = DWC3_MDWIDTH(dwc->hwparams.hwparams0);
+
+	/* MDWIDTH is represented in bits, convert to bytes */
+	mdwidth /= 8;
 
-	usb_ep_set_maxpacket_limit(&dep->endpoint, 1024);
+	/* All OUT endpoints share a single RxFIFO space */
+	size = dwc3_readl(dwc->regs, DWC3_GRXFIFOSIZ(0));
+	if (dwc3_is_usb31(dwc))
+		size = DWC31_GRXFIFOSIZ_RXFDEP(size);
+	else
+		size = DWC3_GRXFIFOSIZ_RXFDEP(size);
+
+	/* FIFO depth is in MDWDITH bytes */
+	size *= mdwidth;
+
+	/*
+	 * To meet performance requirement, a minimum recommended RxFIFO size
+	 * is defined as follow:
+	 * RxFIFO size >= (3 x MaxPacketSize) +
+	 * (3 x 8 bytes setup packets size) + (16 bytes clock crossing margin)
+	 *
+	 * Then calculate the max packet limit as below.
+	 */
+	size -= (3 * 8) + 16;
+	if (size < 0)
+		size = 0;
+	else
+		size /= 3;
+
+	usb_ep_set_maxpacket_limit(&dep->endpoint, size);
 	dep->endpoint.max_streams = 15;
 	dep->endpoint.ops = &dwc3_gadget_ep_ops;
 	list_add_tail(&dep->endpoint.ep_list,
-- 
2.20.1

[PATCH AUTOSEL 5.6 28/79] usb: dwc3: gadget: Do link recovery for SS and SSP

[Sasha Levin]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit d0550cd20e52558ecf6847a0f96ebd5d944c17e4 ]

The controller always supports link recovery for device in SS and SSP.
Remove the speed limit check. Also, when the device is in RESUME or
RESET state, it means the controller received the resume/reset request.
The driver must send the link recovery to acknowledge the request. They
are valid states for the driver to send link recovery.

Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver")
Fixes: ee5cd41c9117 ("usb: dwc3: Update speed checks for SuperSpeedPlus")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/gadget.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 1e68c90a83781..bc1cf6d0412a3 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1728,7 +1728,6 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 	u32			reg;
 
 	u8			link_state;
-	u8			speed;
 
 	/*
 	 * According to the Databook Remote wakeup request should
@@ -1738,16 +1737,13 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 	 */
 	reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 
-	speed = reg & DWC3_DSTS_CONNECTSPD;
-	if ((speed == DWC3_DSTS_SUPERSPEED) ||
-	    (speed == DWC3_DSTS_SUPERSPEED_PLUS))
-		return 0;
-
 	link_state = DWC3_DSTS_USBLNKST(reg);
 
 	switch (link_state) {
+	case DWC3_LINK_STATE_RESET:
 	case DWC3_LINK_STATE_RX_DET:	/* in HS, means Early Suspend */
 	case DWC3_LINK_STATE_U3:	/* in HS, means SUSPEND */
+	case DWC3_LINK_STATE_RESUME:
 		break;
 	default:
 		return -EINVAL;
-- 
2.20.1

[PATCH AUTOSEL 5.6 29/79] ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode

[Sasha Levin]

From: Matthias Blankertz <matthias.blankertz@cetitec.com>

[ Upstream commit a09fb3f28a60ba3e928a1fa94b0456780800299d ]

The parent SSI of a multi-SSI setup must be fully setup, started and
stopped since it is also part of the playback/capture setup. So only
skip the SSI (as per commit 203cdf51f288 ("ASoC: rsnd: SSI parent cares
SWSP bit") and commit 597b046f0d99 ("ASoC: rsnd: control SSICR::EN
correctly")) if the SSI is parent outside of a multi-SSI setup.

Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index fc5d089868dfc..d51fb3a394486 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -407,7 +407,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod,
 	 * We shouldn't exchange SWSP after running.
 	 * This means, parent needs to care it.
 	 */
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		goto init_end;
 
 	if (rsnd_io_is_play(io))
@@ -559,7 +559,7 @@ static int rsnd_ssi_start(struct rsnd_mod *mod,
 	 * EN is for data output.
 	 * SSI parent EN is not needed.
 	 */
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		return 0;
 
 	ssi->cr_en = EN;
@@ -582,7 +582,7 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
 	if (!rsnd_ssi_is_run_mods(mod, io))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		return 0;
 
 	cr  =	ssi->cr_own	|
@@ -620,7 +620,7 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod,
 	if (rsnd_is_gen1(priv))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		return 0;
 
 	if (!rsnd_ssi_is_run_mods(mod, io))
-- 
2.20.1

[PATCH AUTOSEL 5.6 29/79] ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode

[Sasha Levin]

From: Matthias Blankertz <matthias.blankertz@cetitec.com>

[ Upstream commit a09fb3f28a60ba3e928a1fa94b0456780800299d ]

The parent SSI of a multi-SSI setup must be fully setup, started and
stopped since it is also part of the playback/capture setup. So only
skip the SSI (as per commit 203cdf51f288 ("ASoC: rsnd: SSI parent cares
SWSP bit") and commit 597b046f0d99 ("ASoC: rsnd: control SSICR::EN
correctly")) if the SSI is parent outside of a multi-SSI setup.

Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index fc5d089868dfc..d51fb3a394486 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -407,7 +407,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod,
 	 * We shouldn't exchange SWSP after running.
 	 * This means, parent needs to care it.
 	 */
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		goto init_end;
 
 	if (rsnd_io_is_play(io))
@@ -559,7 +559,7 @@ static int rsnd_ssi_start(struct rsnd_mod *mod,
 	 * EN is for data output.
 	 * SSI parent EN is not needed.
 	 */
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		return 0;
 
 	ssi->cr_en = EN;
@@ -582,7 +582,7 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
 	if (!rsnd_ssi_is_run_mods(mod, io))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		return 0;
 
 	cr  =	ssi->cr_own	|
@@ -620,7 +620,7 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod,
 	if (rsnd_is_gen1(priv))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io))
+	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
 		return 0;
 
 	if (!rsnd_ssi_is_run_mods(mod, io))
-- 
2.20.1

[PATCH AUTOSEL 5.6 30/79] ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode

[Sasha Levin]

From: Matthias Blankertz <matthias.blankertz@cetitec.com>

[ Upstream commit b94e164759b82d0c1c80d4b1c8f12c9bee83f11d ]

The HDMI?_SEL register maps up to four stereo SSI data lanes onto the
sdata[0..3] inputs of the HDMI output block. The upper half of the
register contains four blocks of 4 bits, with the most significant
controlling the sdata3 line and the least significant the sdata0 line.

The shift calculation has an off-by-one error, causing the parent SSI to
be mapped to sdata3, the first multi-SSI child to sdata0 and so forth.
As the parent SSI transmits the stereo L/R channels, and the HDMI core
expects it on the sdata0 line, this causes no audio to be output when
playing stereo audio on a multichannel capable HDMI out, and
multichannel audio has permutated channels.

Fix the shift calculation to map the parent SSI to sdata0, the first
child to sdata1 etc.

Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssiu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssiu.c b/sound/soc/sh/rcar/ssiu.c
index f35d882118874..9c7c3e7539c93 100644
--- a/sound/soc/sh/rcar/ssiu.c
+++ b/sound/soc/sh/rcar/ssiu.c
@@ -221,7 +221,7 @@ static int rsnd_ssiu_init_gen2(struct rsnd_mod *mod,
 			i;
 
 		for_each_rsnd_mod_array(i, pos, io, rsnd_ssi_array) {
-			shift	= (i * 4) + 16;
+			shift	= (i * 4) + 20;
 			val	= (val & ~(0xF << shift)) |
 				rsnd_mod_id(pos) << shift;
 		}
-- 
2.20.1

[PATCH AUTOSEL 5.6 30/79] ASoC: rsnd: Fix HDMI channel mapping for multi-SSI mode

[Sasha Levin]

From: Matthias Blankertz <matthias.blankertz@cetitec.com>

[ Upstream commit b94e164759b82d0c1c80d4b1c8f12c9bee83f11d ]

The HDMI?_SEL register maps up to four stereo SSI data lanes onto the
sdata[0..3] inputs of the HDMI output block. The upper half of the
register contains four blocks of 4 bits, with the most significant
controlling the sdata3 line and the least significant the sdata0 line.

The shift calculation has an off-by-one error, causing the parent SSI to
be mapped to sdata3, the first multi-SSI child to sdata0 and so forth.
As the parent SSI transmits the stereo L/R channels, and the HDMI core
expects it on the sdata0 line, this causes no audio to be output when
playing stereo audio on a multichannel capable HDMI out, and
multichannel audio has permutated channels.

Fix the shift calculation to map the parent SSI to sdata0, the first
child to sdata1 etc.

Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssiu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssiu.c b/sound/soc/sh/rcar/ssiu.c
index f35d882118874..9c7c3e7539c93 100644
--- a/sound/soc/sh/rcar/ssiu.c
+++ b/sound/soc/sh/rcar/ssiu.c
@@ -221,7 +221,7 @@ static int rsnd_ssiu_init_gen2(struct rsnd_mod *mod,
 			i;
 
 		for_each_rsnd_mod_array(i, pos, io, rsnd_ssi_array) {
-			shift	= (i * 4) + 16;
+			shift	= (i * 4) + 20;
 			val	= (val & ~(0xF << shift)) |
 				rsnd_mod_id(pos) << shift;
 		}
-- 
2.20.1

[PATCH AUTOSEL 5.6 31/79] ASoC: codecs: hdac_hdmi: Fix incorrect use of list_for_each_entry

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 326b509238171d37402dbe308e154cc234ed1960 ]

If we don't find any pcm, pcm will point at address at an offset from
the the list head and not a meaningful structure. Fix this by returning
correct pcm if found and NULL if not. Found with coccinelle.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415162849.308-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/hdac_hdmi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index e6558475e006d..f0f689ddbefe8 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -142,14 +142,14 @@ static struct hdac_hdmi_pcm *
 hdac_hdmi_get_pcm_from_cvt(struct hdac_hdmi_priv *hdmi,
 			   struct hdac_hdmi_cvt *cvt)
 {
-	struct hdac_hdmi_pcm *pcm = NULL;
+	struct hdac_hdmi_pcm *pcm;
 
 	list_for_each_entry(pcm, &hdmi->pcm_list, head) {
 		if (pcm->cvt == cvt)
-			break;
+			return pcm;
 	}
 
-	return pcm;
+	return NULL;
 }
 
 static void hdac_hdmi_jack_report(struct hdac_hdmi_pcm *pcm,
-- 
2.20.1

[PATCH AUTOSEL 5.6 31/79] ASoC: codecs: hdac_hdmi: Fix incorrect use of list_for_each_entry

[Sasha Levin]

From: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>

[ Upstream commit 326b509238171d37402dbe308e154cc234ed1960 ]

If we don't find any pcm, pcm will point at address at an offset from
the the list head and not a meaningful structure. Fix this by returning
correct pcm if found and NULL if not. Found with coccinelle.

Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415162849.308-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/hdac_hdmi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index e6558475e006d..f0f689ddbefe8 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -142,14 +142,14 @@ static struct hdac_hdmi_pcm *
 hdac_hdmi_get_pcm_from_cvt(struct hdac_hdmi_priv *hdmi,
 			   struct hdac_hdmi_cvt *cvt)
 {
-	struct hdac_hdmi_pcm *pcm = NULL;
+	struct hdac_hdmi_pcm *pcm;
 
 	list_for_each_entry(pcm, &hdmi->pcm_list, head) {
 		if (pcm->cvt == cvt)
-			break;
+			return pcm;
 	}
 
-	return pcm;
+	return NULL;
 }
 
 static void hdac_hdmi_jack_report(struct hdac_hdmi_pcm *pcm,
-- 
2.20.1

[PATCH AUTOSEL 5.6 32/79] ARM: dts: bcm283x: Disable dsi0 node

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit 90444b958461a5f8fc299ece0fe17eab15cba1e1 ]

Since its inception the module was meant to be disabled by default, but
the original commit failed to add the relevant property.

Fixes: 4aba4cf82054 ("ARM: dts: bcm2835: Add the DSI module nodes and clocks")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm283x.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index e1abe8c730cef..b83a864e2e8ba 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -372,6 +372,7 @@
 					     "dsi0_ddr2",
 					     "dsi0_ddr";
 
+			status = "disabled";
 		};
 
 		aux: aux@7e215000 {
-- 
2.20.1

[PATCH AUTOSEL 5.6 32/79] ARM: dts: bcm283x: Disable dsi0 node

[Sasha Levin]

From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit 90444b958461a5f8fc299ece0fe17eab15cba1e1 ]

Since its inception the module was meant to be disabled by default, but
the original commit failed to add the relevant property.

Fixes: 4aba4cf82054 ("ARM: dts: bcm2835: Add the DSI module nodes and clocks")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm283x.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index e1abe8c730cef..b83a864e2e8ba 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -372,6 +372,7 @@
 					     "dsi0_ddr2",
 					     "dsi0_ddr";
 
+			status = "disabled";
 		};
 
 		aux: aux@7e215000 {
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 33/79] remoteproc: qcom_q6v5_mss: fix a bug in q6v5_probe()

[Sasha Levin]

From: Alex Elder <elder@linaro.org>

[ Upstream commit 13c060b50a341dd60303e5264d12108b5747f200 ]

If looking up the DT "firmware-name" property fails in q6v6_probe(),
the function returns without freeing the remoteproc structure
that has been allocated.  Fix this by jumping to the free_rproc
label, which takes care of this.

Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20200403175005.17130-3-elder@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 0b1d737b0e97d..8844fc56c5f6d 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -1607,7 +1607,7 @@ static int q6v5_probe(struct platform_device *pdev)
 	ret = of_property_read_string_index(pdev->dev.of_node, "firmware-name",
 					    1, &qproc->hexagon_mdt_image);
 	if (ret < 0 && ret != -EINVAL)
-		return ret;
+		goto free_rproc;
 
 	platform_set_drvdata(pdev, qproc);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 34/79] usb: gadget: udc: atmel: Fix vbus disconnect handling

[Sasha Levin]

From: Cristian Birsan <cristian.birsan@microchip.com>

[ Upstream commit 12b94da411f9c6d950beb067d913024fd5617a61 ]

A DMA transfer can be in progress while vbus is lost due to a cable
disconnect. For endpoints that use DMA, this condition can lead to
peripheral hang. The patch ensures that endpoints are disabled before
the clocks are stopped to prevent this issue.

Fixes: a64ef71ddc13 ("usb: gadget: atmel_usba_udc: condition clocks to vbus state")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 6e0432141c409..22200341c8ec3 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1951,10 +1951,10 @@ static irqreturn_t usba_vbus_irq_thread(int irq, void *devid)
 			usba_start(udc);
 		} else {
 			udc->suspended = false;
-			usba_stop(udc);
-
 			if (udc->driver->disconnect)
 				udc->driver->disconnect(&udc->gadget);
+
+			usba_stop(udc);
 		}
 		udc->vbus_prev = vbus;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.6 34/79] usb: gadget: udc: atmel: Fix vbus disconnect handling

[Sasha Levin]

From: Cristian Birsan <cristian.birsan@microchip.com>

[ Upstream commit 12b94da411f9c6d950beb067d913024fd5617a61 ]

A DMA transfer can be in progress while vbus is lost due to a cable
disconnect. For endpoints that use DMA, this condition can lead to
peripheral hang. The patch ensures that endpoints are disabled before
the clocks are stopped to prevent this issue.

Fixes: a64ef71ddc13 ("usb: gadget: atmel_usba_udc: condition clocks to vbus state")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/atmel_usba_udc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c
index 6e0432141c409..22200341c8ec3 100644
--- a/drivers/usb/gadget/udc/atmel_usba_udc.c
+++ b/drivers/usb/gadget/udc/atmel_usba_udc.c
@@ -1951,10 +1951,10 @@ static irqreturn_t usba_vbus_irq_thread(int irq, void *devid)
 			usba_start(udc);
 		} else {
 			udc->suspended = false;
-			usba_stop(udc);
-
 			if (udc->driver->disconnect)
 				udc->driver->disconnect(&udc->gadget);
+
+			usba_stop(udc);
 		}
 		udc->vbus_prev = vbus;
 	}
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 35/79] svcrdma: Fix trace point use-after-free race

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit e28b4fc652c1830796a4d3e09565f30c20f9a2cf ]

I hit this while testing nfsd-5.7 with kernel memory debugging
enabled on my server:

Mar 30 13:21:45 klimt kernel: BUG: unable to handle page fault for address: ffff8887e6c279a8
Mar 30 13:21:45 klimt kernel: #PF: supervisor read access in kernel mode
Mar 30 13:21:45 klimt kernel: #PF: error_code(0x0000) - not-present page
Mar 30 13:21:45 klimt kernel: PGD 3601067 P4D 3601067 PUD 87c519067 PMD 87c3e2067 PTE 800ffff8193d8060
Mar 30 13:21:45 klimt kernel: Oops: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
Mar 30 13:21:45 klimt kernel: CPU: 2 PID: 1933 Comm: nfsd Not tainted 5.6.0-rc6-00040-g881e87a3c6f9 #1591
Mar 30 13:21:45 klimt kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015
Mar 30 13:21:45 klimt kernel: RIP: 0010:svc_rdma_post_chunk_ctxt+0xab/0x284 [rpcrdma]
Mar 30 13:21:45 klimt kernel: Code: c1 83 34 02 00 00 29 d0 85 c0 7e 72 48 8b bb a0 02 00 00 48 8d 54 24 08 4c 89 e6 48 8b 07 48 8b 40 20 e8 5a 5c 2b e1 41 89 c6 <8b> 45 20 89 44 24 04 8b 05 02 e9 01 00 85 c0 7e 33 e9 5e 01 00 00
Mar 30 13:21:45 klimt kernel: RSP: 0018:ffffc90000dfbdd8 EFLAGS: 00010286
Mar 30 13:21:45 klimt kernel: RAX: 0000000000000000 RBX: ffff8887db8db400 RCX: 0000000000000030
Mar 30 13:21:45 klimt kernel: RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000246
Mar 30 13:21:45 klimt kernel: RBP: ffff8887e6c27988 R08: 0000000000000000 R09: 0000000000000004
Mar 30 13:21:45 klimt kernel: R10: ffffc90000dfbdd8 R11: 00c068ef00000000 R12: ffff8887eb4e4a80
Mar 30 13:21:45 klimt kernel: R13: ffff8887db8db634 R14: 0000000000000000 R15: ffff8887fc931000
Mar 30 13:21:45 klimt kernel: FS:  0000000000000000(0000) GS:ffff88885bd00000(0000) knlGS:0000000000000000
Mar 30 13:21:45 klimt kernel: CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8 CR3: 000000081b72e002 CR4: 00000000001606e0
Mar 30 13:21:45 klimt kernel: Call Trace:
Mar 30 13:21:45 klimt kernel: ? svc_rdma_vec_to_sg+0x7f/0x7f [rpcrdma]
Mar 30 13:21:45 klimt kernel: svc_rdma_send_write_chunk+0x59/0xce [rpcrdma]
Mar 30 13:21:45 klimt kernel: svc_rdma_sendto+0xf9/0x3ae [rpcrdma]
Mar 30 13:21:45 klimt kernel: ? nfsd_destroy+0x51/0x51 [nfsd]
Mar 30 13:21:45 klimt kernel: svc_send+0x105/0x1e3 [sunrpc]
Mar 30 13:21:45 klimt kernel: nfsd+0xf2/0x149 [nfsd]
Mar 30 13:21:45 klimt kernel: kthread+0xf6/0xfb
Mar 30 13:21:45 klimt kernel: ? kthread_queue_delayed_work+0x74/0x74
Mar 30 13:21:45 klimt kernel: ret_from_fork+0x3a/0x50
Mar 30 13:21:45 klimt kernel: Modules linked in: ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue ib_umad ib_ipoib mlx4_ib sb_edac x86_pkg_temp_thermal iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel glue_helper crypto_simd cryptd pcspkr rpcrdma i2c_i801 rdma_ucm lpc_ich mfd_core ib_iser rdma_cm iw_cm ib_cm mei_me raid0 libiscsi mei sg scsi_transport_iscsi ioatdma wmi ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter nfsd nfs_acl lockd auth_rpcgss grace sunrpc ip_tables xfs libcrc32c mlx4_en sd_mod sr_mod cdrom mlx4_core crc32c_intel igb nvme i2c_algo_bit ahci i2c_core libahci nvme_core dca libata t10_pi qedr dm_mirror dm_region_hash dm_log dm_mod dax qede qed crc8 ib_uverbs ib_core
Mar 30 13:21:45 klimt kernel: CR2: ffff8887e6c279a8
Mar 30 13:21:45 klimt kernel: ---[ end trace 87971d2ad3429424 ]---

It's absolutely not safe to use resources pointed to by the @send_wr
argument of ib_post_send() _after_ that function returns. Those
resources are typically freed by the Send completion handler, which
can run before ib_post_send() returns.

Thus the trace points currently around ib_post_send() in the
server's RPC/RDMA transport are a hazard, even when they are
disabled. Rearrange them so that they touch the Work Request only
_before_ ib_post_send() is invoked.

Fixes: bd2abef33394 ("svcrdma: Trace key RDMA API events")
Fixes: 4201c7464753 ("svcrdma: Introduce svc_rdma_send_ctxt")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/trace/events/rpcrdma.h        | 50 +++++++++++++++++++--------
 net/sunrpc/xprtrdma/svc_rdma_rw.c     |  3 +-
 net/sunrpc/xprtrdma/svc_rdma_sendto.c | 16 +++++----
 3 files changed, 46 insertions(+), 23 deletions(-)

diff --git a/include/trace/events/rpcrdma.h b/include/trace/events/rpcrdma.h
index c0e4c93324f57..fa14adf242353 100644
--- a/include/trace/events/rpcrdma.h
+++ b/include/trace/events/rpcrdma.h
@@ -1699,17 +1699,15 @@ DECLARE_EVENT_CLASS(svcrdma_sendcomp_event,
 
 TRACE_EVENT(svcrdma_post_send,
 	TP_PROTO(
-		const struct ib_send_wr *wr,
-		int status
+		const struct ib_send_wr *wr
 	),
 
-	TP_ARGS(wr, status),
+	TP_ARGS(wr),
 
 	TP_STRUCT__entry(
 		__field(const void *, cqe)
 		__field(unsigned int, num_sge)
 		__field(u32, inv_rkey)
-		__field(int, status)
 	),
 
 	TP_fast_assign(
@@ -1717,12 +1715,11 @@ TRACE_EVENT(svcrdma_post_send,
 		__entry->num_sge = wr->num_sge;
 		__entry->inv_rkey = (wr->opcode == IB_WR_SEND_WITH_INV) ?
 					wr->ex.invalidate_rkey : 0;
-		__entry->status = status;
 	),
 
-	TP_printk("cqe=%p num_sge=%u inv_rkey=0x%08x status=%d",
+	TP_printk("cqe=%p num_sge=%u inv_rkey=0x%08x",
 		__entry->cqe, __entry->num_sge,
-		__entry->inv_rkey, __entry->status
+		__entry->inv_rkey
 	)
 );
 
@@ -1787,26 +1784,23 @@ TRACE_EVENT(svcrdma_wc_receive,
 TRACE_EVENT(svcrdma_post_rw,
 	TP_PROTO(
 		const void *cqe,
-		int sqecount,
-		int status
+		int sqecount
 	),
 
-	TP_ARGS(cqe, sqecount, status),
+	TP_ARGS(cqe, sqecount),
 
 	TP_STRUCT__entry(
 		__field(const void *, cqe)
 		__field(int, sqecount)
-		__field(int, status)
 	),
 
 	TP_fast_assign(
 		__entry->cqe = cqe;
 		__entry->sqecount = sqecount;
-		__entry->status = status;
 	),
 
-	TP_printk("cqe=%p sqecount=%d status=%d",
-		__entry->cqe, __entry->sqecount, __entry->status
+	TP_printk("cqe=%p sqecount=%d",
+		__entry->cqe, __entry->sqecount
 	)
 );
 
@@ -1902,6 +1896,34 @@ DECLARE_EVENT_CLASS(svcrdma_sendqueue_event,
 DEFINE_SQ_EVENT(full);
 DEFINE_SQ_EVENT(retry);
 
+TRACE_EVENT(svcrdma_sq_post_err,
+	TP_PROTO(
+		const struct svcxprt_rdma *rdma,
+		int status
+	),
+
+	TP_ARGS(rdma, status),
+
+	TP_STRUCT__entry(
+		__field(int, avail)
+		__field(int, depth)
+		__field(int, status)
+		__string(addr, rdma->sc_xprt.xpt_remotebuf)
+	),
+
+	TP_fast_assign(
+		__entry->avail = atomic_read(&rdma->sc_sq_avail);
+		__entry->depth = rdma->sc_sq_depth;
+		__entry->status = status;
+		__assign_str(addr, rdma->sc_xprt.xpt_remotebuf);
+	),
+
+	TP_printk("addr=%s sc_sq_avail=%d/%d status=%d",
+		__get_str(addr), __entry->avail, __entry->depth,
+		__entry->status
+	)
+);
+
 #endif /* _TRACE_RPCRDMA_H */
 
 #include <trace/define_trace.h>
diff --git a/net/sunrpc/xprtrdma/svc_rdma_rw.c b/net/sunrpc/xprtrdma/svc_rdma_rw.c
index 48fe3b16b0d9c..a59912e2666d3 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_rw.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_rw.c
@@ -323,8 +323,6 @@ static int svc_rdma_post_chunk_ctxt(struct svc_rdma_chunk_ctxt *cc)
 		if (atomic_sub_return(cc->cc_sqecount,
 				      &rdma->sc_sq_avail) > 0) {
 			ret = ib_post_send(rdma->sc_qp, first_wr, &bad_wr);
-			trace_svcrdma_post_rw(&cc->cc_cqe,
-					      cc->cc_sqecount, ret);
 			if (ret)
 				break;
 			return 0;
@@ -337,6 +335,7 @@ static int svc_rdma_post_chunk_ctxt(struct svc_rdma_chunk_ctxt *cc)
 		trace_svcrdma_sq_retry(rdma);
 	} while (1);
 
+	trace_svcrdma_sq_post_err(rdma, ret);
 	set_bit(XPT_CLOSE, &xprt->xpt_flags);
 
 	/* If even one was posted, there will be a completion. */
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index f3f108090aa45..612770aaf729b 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -310,15 +310,17 @@ int svc_rdma_send(struct svcxprt_rdma *rdma, struct ib_send_wr *wr)
 		}
 
 		svc_xprt_get(&rdma->sc_xprt);
+		trace_svcrdma_post_send(wr);
 		ret = ib_post_send(rdma->sc_qp, wr, NULL);
-		trace_svcrdma_post_send(wr, ret);
-		if (ret) {
-			set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
-			svc_xprt_put(&rdma->sc_xprt);
-			wake_up(&rdma->sc_send_wait);
-		}
-		break;
+		if (ret)
+			break;
+		return 0;
 	}
+
+	trace_svcrdma_sq_post_err(rdma, ret);
+	set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+	svc_xprt_put(&rdma->sc_xprt);
+	wake_up(&rdma->sc_send_wait);
 	return ret;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 36/79] ASoC: stm32: sai: fix sai probe

[Sasha Levin]

From: Olivier Moysan <olivier.moysan@st.com>

[ Upstream commit e2bcb65782f91390952e849e21b82ed7cb05697f ]

pcm config must be set before snd_dmaengine_pcm_register() call.

Fixes: 0d6defc7e0e4 ("ASoC: stm32: sai: manage rebind issue")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200417142122.10212-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/stm/stm32_sai_sub.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index d3259de43712b..7e965848796c3 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -1543,6 +1543,9 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
+		conf = &stm32_sai_pcm_config_spdif;
+
 	ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not register pcm dma\n");
@@ -1551,15 +1554,10 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
 
 	ret = snd_soc_register_component(&pdev->dev, &stm32_component,
 					 &sai->cpu_dai_drv, 1);
-	if (ret) {
+	if (ret)
 		snd_dmaengine_pcm_unregister(&pdev->dev);
-		return ret;
-	}
-
-	if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
-		conf = &stm32_sai_pcm_config_spdif;
 
-	return 0;
+	return ret;
 }
 
 static int stm32_sai_sub_remove(struct platform_device *pdev)
-- 
2.20.1

[PATCH AUTOSEL 5.6 36/79] ASoC: stm32: sai: fix sai probe

[Sasha Levin]

From: Olivier Moysan <olivier.moysan@st.com>

[ Upstream commit e2bcb65782f91390952e849e21b82ed7cb05697f ]

pcm config must be set before snd_dmaengine_pcm_register() call.

Fixes: 0d6defc7e0e4 ("ASoC: stm32: sai: manage rebind issue")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200417142122.10212-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/stm/stm32_sai_sub.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index d3259de43712b..7e965848796c3 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -1543,6 +1543,9 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
+		conf = &stm32_sai_pcm_config_spdif;
+
 	ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not register pcm dma\n");
@@ -1551,15 +1554,10 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
 
 	ret = snd_soc_register_component(&pdev->dev, &stm32_component,
 					 &sai->cpu_dai_drv, 1);
-	if (ret) {
+	if (ret)
 		snd_dmaengine_pcm_unregister(&pdev->dev);
-		return ret;
-	}
-
-	if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
-		conf = &stm32_sai_pcm_config_spdif;
 
-	return 0;
+	return ret;
 }
 
 static int stm32_sai_sub_remove(struct platform_device *pdev)
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 36/79] ASoC: stm32: sai: fix sai probe

[Sasha Levin]

From: Olivier Moysan <olivier.moysan@st.com>

[ Upstream commit e2bcb65782f91390952e849e21b82ed7cb05697f ]

pcm config must be set before snd_dmaengine_pcm_register() call.

Fixes: 0d6defc7e0e4 ("ASoC: stm32: sai: manage rebind issue")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200417142122.10212-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/stm/stm32_sai_sub.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/sound/soc/stm/stm32_sai_sub.c b/sound/soc/stm/stm32_sai_sub.c
index d3259de43712b..7e965848796c3 100644
--- a/sound/soc/stm/stm32_sai_sub.c
+++ b/sound/soc/stm/stm32_sai_sub.c
@@ -1543,6 +1543,9 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
+		conf = &stm32_sai_pcm_config_spdif;
+
 	ret = snd_dmaengine_pcm_register(&pdev->dev, conf, 0);
 	if (ret) {
 		dev_err(&pdev->dev, "Could not register pcm dma\n");
@@ -1551,15 +1554,10 @@ static int stm32_sai_sub_probe(struct platform_device *pdev)
 
 	ret = snd_soc_register_component(&pdev->dev, &stm32_component,
 					 &sai->cpu_dai_drv, 1);
-	if (ret) {
+	if (ret)
 		snd_dmaengine_pcm_unregister(&pdev->dev);
-		return ret;
-	}
-
-	if (STM_SAI_PROTOCOL_IS_SPDIF(sai))
-		conf = &stm32_sai_pcm_config_spdif;
 
-	return 0;
+	return ret;
 }
 
 static int stm32_sai_sub_remove(struct platform_device *pdev)
-- 
2.20.1

[PATCH AUTOSEL 5.6 37/79] ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 8c05246c0b58cbe80580ea4be05f6d51228af8a9 ]

Major regressions were detected by SOF CI on CherryTrail and Broadwell:

[   25.705750]  SSP2-Codec: ASoC: no backend playback stream
[   27.923378]  SSP2-Codec: ASoC: no users playback at close - state

This is root-caused to the introduction of the DAI capability checks
with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a
requirement for all DAIs to report at least a non-zero min_channels
field.

For some reason the SSP structures used for SKL+ did provide this
information but legacy platforms didn't.

Fixes: 9b5db059366ae2 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200417172014.11760-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/intel/bdw.c | 16 +++++++++++++
 sound/soc/sof/intel/byt.c | 48 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+)

diff --git a/sound/soc/sof/intel/bdw.c b/sound/soc/sof/intel/bdw.c
index 6c23c57693309..a32a3ef78ec5d 100644
--- a/sound/soc/sof/intel/bdw.c
+++ b/sound/soc/sof/intel/bdw.c
@@ -567,9 +567,25 @@ static void bdw_set_mach_params(const struct snd_soc_acpi_mach *mach,
 static struct snd_soc_dai_driver bdw_dai[] = {
 {
 	.name = "ssp0-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "ssp1-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 };
 
diff --git a/sound/soc/sof/intel/byt.c b/sound/soc/sof/intel/byt.c
index f84391294f12c..29fd1d86156ce 100644
--- a/sound/soc/sof/intel/byt.c
+++ b/sound/soc/sof/intel/byt.c
@@ -459,21 +459,69 @@ static void byt_set_mach_params(const struct snd_soc_acpi_mach *mach,
 static struct snd_soc_dai_driver byt_dai[] = {
 {
 	.name = "ssp0-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "ssp1-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "ssp2-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	}
 },
 {
 	.name = "ssp3-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "ssp4-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "ssp5-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 37/79] ASoC: SOF: Intel: add min/max channels for SSP on Baytrail/Broadwell

[Sasha Levin]

From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

[ Upstream commit 8c05246c0b58cbe80580ea4be05f6d51228af8a9 ]

Major regressions were detected by SOF CI on CherryTrail and Broadwell:

[   25.705750]  SSP2-Codec: ASoC: no backend playback stream
[   27.923378]  SSP2-Codec: ASoC: no users playback at close - state

This is root-caused to the introduction of the DAI capability checks
with snd_soc_dai_stream_valid(). Its use in soc-pcm.c makes it a
requirement for all DAIs to report at least a non-zero min_channels
field.

For some reason the SSP structures used for SKL+ did provide this
information but legacy platforms didn't.

Fixes: 9b5db059366ae2 ("ASoC: soc-pcm: dpcm: Only allow playback/capture if supported")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200417172014.11760-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sof/intel/bdw.c | 16 +++++++++++++
 sound/soc/sof/intel/byt.c | 48 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 64 insertions(+)

diff --git a/sound/soc/sof/intel/bdw.c b/sound/soc/sof/intel/bdw.c
index 6c23c57693309..a32a3ef78ec5d 100644
--- a/sound/soc/sof/intel/bdw.c
+++ b/sound/soc/sof/intel/bdw.c
@@ -567,9 +567,25 @@ static void bdw_set_mach_params(const struct snd_soc_acpi_mach *mach,
 static struct snd_soc_dai_driver bdw_dai[] = {
 {
 	.name = "ssp0-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "ssp1-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 };
 
diff --git a/sound/soc/sof/intel/byt.c b/sound/soc/sof/intel/byt.c
index f84391294f12c..29fd1d86156ce 100644
--- a/sound/soc/sof/intel/byt.c
+++ b/sound/soc/sof/intel/byt.c
@@ -459,21 +459,69 @@ static void byt_set_mach_params(const struct snd_soc_acpi_mach *mach,
 static struct snd_soc_dai_driver byt_dai[] = {
 {
 	.name = "ssp0-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "ssp1-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "ssp2-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	}
 },
 {
 	.name = "ssp3-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "ssp4-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 {
 	.name = "ssp5-port",
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 8,
+	},
 },
 };
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 38/79] drm/amd/powerplay: fix resume failed as smu table initialize early exit

[Sasha Levin]

From: Prike Liang <Prike.Liang@amd.com>

[ Upstream commit 45a5e639548c459a5accebad340078e4e6e0e512 ]

When the amdgpu in the suspend/resume loop need notify the dpm disabled,
otherwise the smu table will be uninitialize and result in resume failed.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/renoir_ppt.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
index f7a1ce37227cd..4a52c310058d1 100644
--- a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
@@ -889,12 +889,17 @@ static int renoir_read_sensor(struct smu_context *smu,
 
 static bool renoir_is_dpm_running(struct smu_context *smu)
 {
+	struct amdgpu_device *adev = smu->adev;
+
 	/*
 	 * Util now, the pmfw hasn't exported the interface of SMU
 	 * feature mask to APU SKU so just force on all the feature
 	 * at early initial stage.
 	 */
-	return true;
+	if (adev->in_suspend)
+		return false;
+	else
+		return true;
 
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 38/79] drm/amd/powerplay: fix resume failed as smu table initialize early exit

[Sasha Levin]

From: Prike Liang <Prike.Liang@amd.com>

[ Upstream commit 45a5e639548c459a5accebad340078e4e6e0e512 ]

When the amdgpu in the suspend/resume loop need notify the dpm disabled,
otherwise the smu table will be uninitialize and result in resume failed.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Tested-by: Mengbing Wang <Mengbing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/renoir_ppt.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
index f7a1ce37227cd..4a52c310058d1 100644
--- a/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
+++ b/drivers/gpu/drm/amd/powerplay/renoir_ppt.c
@@ -889,12 +889,17 @@ static int renoir_read_sensor(struct smu_context *smu,
 
 static bool renoir_is_dpm_running(struct smu_context *smu)
 {
+	struct amdgpu_device *adev = smu->adev;
+
 	/*
 	 * Util now, the pmfw hasn't exported the interface of SMU
 	 * feature mask to APU SKU so just force on all the feature
 	 * at early initial stage.
 	 */
-	return true;
+	if (adev->in_suspend)
+		return false;
+	else
+		return true;
 
 }
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 39/79] drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii)

[Sasha Levin]

From: Sandeep Raghuraman <sandy.8925@gmail.com>

[ Upstream commit bbc25dadc7ed19f9d6b2e30980f0eb4c741bb8bf ]

Initialize thermal controller fields in the PowerPlay table for Hawaii
GPUs, so that fan speeds are reported.

Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/powerplay/hwmgr/processpptables.c | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c b/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
index 77c14671866c0..719597c5d27d9 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
@@ -984,6 +984,32 @@ static int init_thermal_controller(
 			struct pp_hwmgr *hwmgr,
 			const ATOM_PPLIB_POWERPLAYTABLE *powerplay_table)
 {
+	hwmgr->thermal_controller.ucType =
+			powerplay_table->sThermalController.ucType;
+	hwmgr->thermal_controller.ucI2cLine =
+			powerplay_table->sThermalController.ucI2cLine;
+	hwmgr->thermal_controller.ucI2cAddress =
+			powerplay_table->sThermalController.ucI2cAddress;
+
+	hwmgr->thermal_controller.fanInfo.bNoFan =
+		(0 != (powerplay_table->sThermalController.ucFanParameters &
+			ATOM_PP_FANPARAMETERS_NOFAN));
+
+	hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution =
+		powerplay_table->sThermalController.ucFanParameters &
+		ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK;
+
+	hwmgr->thermal_controller.fanInfo.ulMinRPM
+		= powerplay_table->sThermalController.ucFanMinRPM * 100UL;
+	hwmgr->thermal_controller.fanInfo.ulMaxRPM
+		= powerplay_table->sThermalController.ucFanMaxRPM * 100UL;
+
+	set_hw_cap(hwmgr,
+		   ATOM_PP_THERMALCONTROLLER_NONE != hwmgr->thermal_controller.ucType,
+		   PHM_PlatformCaps_ThermalController);
+
+	hwmgr->thermal_controller.use_hw_fan_control = 1;
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 39/79] drm/amdgpu: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii)

[Sasha Levin]

From: Sandeep Raghuraman <sandy.8925@gmail.com>

[ Upstream commit bbc25dadc7ed19f9d6b2e30980f0eb4c741bb8bf ]

Initialize thermal controller fields in the PowerPlay table for Hawaii
GPUs, so that fan speeds are reported.

Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../drm/amd/powerplay/hwmgr/processpptables.c | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c b/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
index 77c14671866c0..719597c5d27d9 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
@@ -984,6 +984,32 @@ static int init_thermal_controller(
 			struct pp_hwmgr *hwmgr,
 			const ATOM_PPLIB_POWERPLAYTABLE *powerplay_table)
 {
+	hwmgr->thermal_controller.ucType =
+			powerplay_table->sThermalController.ucType;
+	hwmgr->thermal_controller.ucI2cLine =
+			powerplay_table->sThermalController.ucI2cLine;
+	hwmgr->thermal_controller.ucI2cAddress =
+			powerplay_table->sThermalController.ucI2cAddress;
+
+	hwmgr->thermal_controller.fanInfo.bNoFan =
+		(0 != (powerplay_table->sThermalController.ucFanParameters &
+			ATOM_PP_FANPARAMETERS_NOFAN));
+
+	hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution =
+		powerplay_table->sThermalController.ucFanParameters &
+		ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK;
+
+	hwmgr->thermal_controller.fanInfo.ulMinRPM
+		= powerplay_table->sThermalController.ucFanMinRPM * 100UL;
+	hwmgr->thermal_controller.fanInfo.ulMaxRPM
+		= powerplay_table->sThermalController.ucFanMaxRPM * 100UL;
+
+	set_hw_cap(hwmgr,
+		   ATOM_PP_THERMALCONTROLLER_NONE != hwmgr->thermal_controller.ucType,
+		   PHM_PlatformCaps_ThermalController);
+
+	hwmgr->thermal_controller.use_hw_fan_control = 1;
+
 	return 0;
 }
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 40/79] wimax/i2400m: Fix potential urb refcnt leak

[Sasha Levin]

From: Xiyu Yang <xiyuyang19@fudan.edu.cn>

[ Upstream commit 7717cbec172c3554d470023b4020d5781961187e ]

i2400mu_bus_bm_wait_for_ack() invokes usb_get_urb(), which increases the
refcount of the "notif_urb".

When i2400mu_bus_bm_wait_for_ack() returns, local variable "notif_urb"
becomes invalid, so the refcount should be decreased to keep refcount
balanced.

The issue happens in all paths of i2400mu_bus_bm_wait_for_ack(), which
forget to decrease the refcnt increased by usb_get_urb(), causing a
refcnt leak.

Fix this issue by calling usb_put_urb() before the
i2400mu_bus_bm_wait_for_ack() returns.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wimax/i2400m/usb-fw.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c
index 529ebca1e9e13..1f7709d24f352 100644
--- a/drivers/net/wimax/i2400m/usb-fw.c
+++ b/drivers/net/wimax/i2400m/usb-fw.c
@@ -354,6 +354,7 @@ out:
 		usb_autopm_put_interface(i2400mu->usb_iface);
 	d_fnend(8, dev, "(i2400m %p ack %p size %zu) = %ld\n",
 		i2400m, ack, ack_size, (long) result);
+	usb_put_urb(&notif_urb);
 	return result;
 
 error_exceeded:
-- 
2.20.1

[PATCH AUTOSEL 5.6 41/79] net: stmmac: fix enabling socfpga's ptp_ref_clock

[Sasha Levin]

From: Julien Beraud <julien.beraud@orolia.com>

[ Upstream commit 15ce30609d1e88d42fb1cd948f453e6d5f188249 ]

There are 2 registers to write to enable a ptp ref clock coming from the
fpga.
One that enables the usage of the clock from the fpga for emac0 and emac1
as a ptp ref clock, and the other to allow signals from the fpga to reach
emac0 and emac1.
Currently, if the dwmac-socfpga has phymode set to PHY_INTERFACE_MODE_MII,
PHY_INTERFACE_MODE_GMII, or PHY_INTERFACE_MODE_SGMII, both registers will
be written and the ptp ref clock will be set as coming from the fpga.
Separate the 2 register writes to only enable signals from the fpga to
reach emac0 or emac1 when ptp ref clock is not coming from the fpga.

Signed-off-by: Julien Beraud <julien.beraud@orolia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index e0212d2fc2a12..b7087245af26a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -289,16 +289,19 @@ static int socfpga_gen5_set_phy_mode(struct socfpga_dwmac *dwmac)
 	    phymode == PHY_INTERFACE_MODE_MII ||
 	    phymode == PHY_INTERFACE_MODE_GMII ||
 	    phymode == PHY_INTERFACE_MODE_SGMII) {
-		ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
 		regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
 			    &module);
 		module |= (SYSMGR_FPGAGRP_MODULE_EMAC << (reg_shift / 2));
 		regmap_write(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG,
 			     module);
-	} else {
-		ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2));
 	}
 
+	if (dwmac->f2h_ptp_ref_clk)
+		ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2);
+	else
+		ctrl &= ~(SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK <<
+			  (reg_shift / 2));
+
 	regmap_write(sys_mgr_base_addr, reg_offset, ctrl);
 
 	/* Deassert reset for the phy configuration to be sampled by
-- 
2.20.1

[PATCH AUTOSEL 5.6 42/79] net: stmmac: Fix sub-second increment

[Sasha Levin]

From: Julien Beraud <julien.beraud@orolia.com>

[ Upstream commit 91a2559c1dc5b0f7e1256d42b1508935e8eabfbf ]

In fine adjustement mode, which is the current default, the sub-second
    increment register is the number of nanoseconds that will be added to
    the clock when the accumulator overflows. At each clock cycle, the
    value of the addend register is added to the accumulator.
    Currently, we use 20ns = 1e09ns / 50MHz as this value whatever the
    frequency of the ptp clock actually is.
    The adjustment is then done on the addend register, only incrementing
    every X clock cycles X being the ratio between 50MHz and ptp_clock_rate
    (addend = 2^32 * 50MHz/ptp_clock_rate).
    This causes the following issues :
    - In case the frequency of the ptp clock is inferior or equal to 50MHz,
      the addend value calculation will overflow and the default
      addend value will be set to 0, causing the clock to not work at
      all. (For instance, for ptp_clock_rate = 50MHz, addend = 2^32).
    - The resolution of the timestamping clock is limited to 20ns while it
      is not needed, thus limiting the accuracy of the timestamping to
      20ns.

    Fix this by setting sub-second increment to 2e09ns / ptp_clock_rate.
    It will allow to reach the minimum possible frequency for
    ptp_clk_ref, which is 5MHz for GMII 1000Mps Full-Duplex by setting the
    sub-second-increment to a higher value. For instance, for 25MHz, it
    gives ssinc = 80ns and default_addend = 2^31.
    It will also allow to use a lower value for sub-second-increment, thus
    improving the timestamping accuracy with frequencies higher than
    100MHz, for instance, for 200MHz, ssinc = 10ns and default_addend =
    2^31.

v1->v2:
 - Remove modifications to the calculation of default addend, which broke
 compatibility with clock frequencies for which 2000000000 / ptp_clk_freq
 is not an integer.
 - Modify description according to discussions.

Signed-off-by: Julien Beraud <julien.beraud@orolia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c    | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
index 0201596225592..e5d9007c8090b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c
@@ -26,12 +26,16 @@ static void config_sub_second_increment(void __iomem *ioaddr,
 	unsigned long data;
 	u32 reg_value;
 
-	/* For GMAC3.x, 4.x versions, convert the ptp_clock to nano second
-	 *	formula = (1/ptp_clock) * 1000000000
-	 * where ptp_clock is 50MHz if fine method is used to update system
+	/* For GMAC3.x, 4.x versions, in "fine adjustement mode" set sub-second
+	 * increment to twice the number of nanoseconds of a clock cycle.
+	 * The calculation of the default_addend value by the caller will set it
+	 * to mid-range = 2^31 when the remainder of this division is zero,
+	 * which will make the accumulator overflow once every 2 ptp_clock
+	 * cycles, adding twice the number of nanoseconds of a clock cycle :
+	 * 2000000000ULL / ptp_clock.
 	 */
 	if (value & PTP_TCR_TSCFUPDT)
-		data = (1000000000ULL / 50000000);
+		data = (2000000000ULL / ptp_clock);
 	else
 		data = (1000000000ULL / ptp_clock);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 43/79] netfilter: nat: fix error handling upon registering inet hook

[Sasha Levin]

From: Hillf Danton <hdanton@sina.com>

[ Upstream commit b4faef1739dd1f3b3981b8bf173a2266ea86b1eb ]

A case of warning was reported by syzbot.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 19934 at net/netfilter/nf_nat_core.c:1106
nf_nat_unregister_fn+0x532/0x5c0 net/netfilter/nf_nat_core.c:1106
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 19934 Comm: syz-executor.5 Not tainted 5.6.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x188/0x20d lib/dump_stack.c:118
 panic+0x2e3/0x75c kernel/panic.c:221
 __warn.cold+0x2f/0x35 kernel/panic.c:582
 report_bug+0x27b/0x2f0 lib/bug.c:195
 fixup_bug arch/x86/kernel/traps.c:175 [inline]
 fixup_bug arch/x86/kernel/traps.c:170 [inline]
 do_error_trap+0x12b/0x220 arch/x86/kernel/traps.c:267
 do_invalid_op+0x32/0x40 arch/x86/kernel/traps.c:286
 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:nf_nat_unregister_fn+0x532/0x5c0 net/netfilter/nf_nat_core.c:1106
Code: ff df 48 c1 ea 03 80 3c 02 00 75 75 48 8b 44 24 10 4c 89 ef 48 c7 00 00 00 00 00 e8 e8 f8 53 fb e9 4d fe ff ff e8 ee 9c 16 fb <0f> 0b e9 41 fe ff ff e8 e2 45 54 fb e9 b5 fd ff ff 48 8b 7c 24 20
RSP: 0018:ffffc90005487208 EFLAGS: 00010246
RAX: 0000000000040000 RBX: 0000000000000004 RCX: ffffc9001444a000
RDX: 0000000000040000 RSI: ffffffff865c94a2 RDI: 0000000000000005
RBP: ffff88808b5cf000 R08: ffff8880a2620140 R09: fffffbfff14bcd79
R10: ffffc90005487208 R11: fffffbfff14bcd78 R12: 0000000000000000
R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000
 nf_nat_ipv6_unregister_fn net/netfilter/nf_nat_proto.c:1017 [inline]
 nf_nat_inet_register_fn net/netfilter/nf_nat_proto.c:1038 [inline]
 nf_nat_inet_register_fn+0xfc/0x140 net/netfilter/nf_nat_proto.c:1023
 nf_tables_register_hook net/netfilter/nf_tables_api.c:224 [inline]
 nf_tables_addchain.constprop.0+0x82e/0x13c0 net/netfilter/nf_tables_api.c:1981
 nf_tables_newchain+0xf68/0x16a0 net/netfilter/nf_tables_api.c:2235
 nfnetlink_rcv_batch+0x83a/0x1610 net/netfilter/nfnetlink.c:433
 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:543 [inline]
 nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:561
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6bf/0x7e0 net/socket.c:2362
 ___sys_sendmsg+0x100/0x170 net/socket.c:2416
 __sys_sendmsg+0xec/0x1b0 net/socket.c:2449
 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
 entry_SYSCALL_64_after_hwframe+0x49/0xb3

and to quiesce it, unregister NFPROTO_IPV6 hook instead of NFPROTO_INET
in case of failing to register NFPROTO_IPV4 hook.

Reported-by: syzbot <syzbot+33e06702fd6cffc24c40@syzkaller.appspotmail.com>
Fixes: d164385ec572 ("netfilter: nat: add inet family nat support")
Cc: Florian Westphal <fw@strlen.de>
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_nat_proto.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nf_nat_proto.c b/net/netfilter/nf_nat_proto.c
index 64eedc17037ad..3d816a1e5442e 100644
--- a/net/netfilter/nf_nat_proto.c
+++ b/net/netfilter/nf_nat_proto.c
@@ -1035,8 +1035,8 @@ int nf_nat_inet_register_fn(struct net *net, const struct nf_hook_ops *ops)
 	ret = nf_nat_register_fn(net, NFPROTO_IPV4, ops, nf_nat_ipv4_ops,
 				 ARRAY_SIZE(nf_nat_ipv4_ops));
 	if (ret)
-		nf_nat_ipv6_unregister_fn(net, ops);
-
+		nf_nat_unregister_fn(net, NFPROTO_IPV6, ops,
+					ARRAY_SIZE(nf_nat_ipv6_ops));
 	return ret;
 }
 EXPORT_SYMBOL_GPL(nf_nat_inet_register_fn);
-- 
2.20.1

[PATCH AUTOSEL 5.6 44/79] counter: 104-quad-8: Add lock guards - generic interface

[Sasha Levin]

From: Syed Nayyar Waris <syednwaris@gmail.com>

[ Upstream commit fc069262261c43ed11d639dadcf982e79bfe652b ]

Add lock protection from race conditions to 104-quad-8 counter driver
generic interface code changes. Mutex calls used for protection.

Fixes: f1d8a071d45b ("counter: 104-quad-8: Add Generic Counter interface support")

Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/counter/104-quad-8.c | 194 +++++++++++++++++++++++++++++------
 1 file changed, 160 insertions(+), 34 deletions(-)

diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c
index 17e67a84777d3..dd0a57f809882 100644
--- a/drivers/counter/104-quad-8.c
+++ b/drivers/counter/104-quad-8.c
@@ -42,6 +42,7 @@ MODULE_PARM_DESC(base, "ACCES 104-QUAD-8 base addresses");
  * @base:		base port address of the IIO device
  */
 struct quad8_iio {
+	struct mutex lock;
 	struct counter_device counter;
 	unsigned int preset[QUAD8_NUM_COUNTERS];
 	unsigned int count_mode[QUAD8_NUM_COUNTERS];
@@ -116,6 +117,8 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
 		/* Borrow XOR Carry effectively doubles count range */
 		*val = (borrow ^ carry) << 24;
 
+		mutex_lock(&priv->lock);
+
 		/* Reset Byte Pointer; transfer Counter to Output Latch */
 		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
 		     base_offset + 1);
@@ -123,6 +126,8 @@ static int quad8_read_raw(struct iio_dev *indio_dev,
 		for (i = 0; i < 3; i++)
 			*val |= (unsigned int)inb(base_offset) << (8 * i);
 
+		mutex_unlock(&priv->lock);
+
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_ENABLE:
 		*val = priv->ab_enable[chan->channel];
@@ -153,6 +158,8 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
 		if ((unsigned int)val > 0xFFFFFF)
 			return -EINVAL;
 
+		mutex_lock(&priv->lock);
+
 		/* Reset Byte Pointer */
 		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 
@@ -176,12 +183,16 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
 		/* Reset Error flag */
 		outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
 
+		mutex_unlock(&priv->lock);
+
 		return 0;
 	case IIO_CHAN_INFO_ENABLE:
 		/* only boolean values accepted */
 		if (val < 0 || val > 1)
 			return -EINVAL;
 
+		mutex_lock(&priv->lock);
+
 		priv->ab_enable[chan->channel] = val;
 
 		ior_cfg = val | priv->preset_enable[chan->channel] << 1;
@@ -189,11 +200,18 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
 		/* Load I/O control configuration */
 		outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
 
+		mutex_unlock(&priv->lock);
+
 		return 0;
 	case IIO_CHAN_INFO_SCALE:
+		mutex_lock(&priv->lock);
+
 		/* Quadrature scaling only available in quadrature mode */
-		if (!priv->quadrature_mode[chan->channel] && (val2 || val != 1))
+		if (!priv->quadrature_mode[chan->channel] &&
+				(val2 || val != 1)) {
+			mutex_unlock(&priv->lock);
 			return -EINVAL;
+		}
 
 		/* Only three gain states (1, 0.5, 0.25) */
 		if (val == 1 && !val2)
@@ -207,11 +225,15 @@ static int quad8_write_raw(struct iio_dev *indio_dev,
 				priv->quadrature_scale[chan->channel] = 2;
 				break;
 			default:
+				mutex_unlock(&priv->lock);
 				return -EINVAL;
 			}
-		else
+		else {
+			mutex_unlock(&priv->lock);
 			return -EINVAL;
+		}
 
+		mutex_unlock(&priv->lock);
 		return 0;
 	}
 
@@ -248,6 +270,8 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
 	if (preset > 0xFFFFFF)
 		return -EINVAL;
 
+	mutex_lock(&priv->lock);
+
 	priv->preset[chan->channel] = preset;
 
 	/* Reset Byte Pointer */
@@ -257,6 +281,8 @@ static ssize_t quad8_write_preset(struct iio_dev *indio_dev, uintptr_t private,
 	for (i = 0; i < 3; i++)
 		outb(preset >> (8 * i), base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -286,6 +312,8 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
 	/* Preset enable is active low in Input/Output Control register */
 	preset_enable = !preset_enable;
 
+	mutex_lock(&priv->lock);
+
 	priv->preset_enable[chan->channel] = preset_enable;
 
 	ior_cfg = priv->ab_enable[chan->channel] |
@@ -294,6 +322,8 @@ static ssize_t quad8_write_set_to_preset_on_index(struct iio_dev *indio_dev,
 	/* Load I/O control configuration to Input / Output Control Register */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -351,6 +381,8 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
 	unsigned int mode_cfg = cnt_mode << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
 
+	mutex_lock(&priv->lock);
+
 	priv->count_mode[chan->channel] = cnt_mode;
 
 	/* Add quadrature mode configuration */
@@ -360,6 +392,8 @@ static int quad8_set_count_mode(struct iio_dev *indio_dev,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -387,19 +421,26 @@ static int quad8_set_synchronous_mode(struct iio_dev *indio_dev,
 	const struct iio_chan_spec *chan, unsigned int synchronous_mode)
 {
 	struct quad8_iio *const priv = iio_priv(indio_dev);
-	const unsigned int idr_cfg = synchronous_mode |
-		priv->index_polarity[chan->channel] << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
+	unsigned int idr_cfg = synchronous_mode;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->index_polarity[chan->channel] << 1;
 
 	/* Index function must be non-synchronous in non-quadrature mode */
-	if (synchronous_mode && !priv->quadrature_mode[chan->channel])
+	if (synchronous_mode && !priv->quadrature_mode[chan->channel]) {
+		mutex_unlock(&priv->lock);
 		return -EINVAL;
+	}
 
 	priv->synchronous_mode[chan->channel] = synchronous_mode;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -427,8 +468,12 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
 	const struct iio_chan_spec *chan, unsigned int quadrature_mode)
 {
 	struct quad8_iio *const priv = iio_priv(indio_dev);
-	unsigned int mode_cfg = priv->count_mode[chan->channel] << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
+	unsigned int mode_cfg;
+
+	mutex_lock(&priv->lock);
+
+	mode_cfg = priv->count_mode[chan->channel] << 1;
 
 	if (quadrature_mode)
 		mode_cfg |= (priv->quadrature_scale[chan->channel] + 1) << 3;
@@ -446,6 +491,8 @@ static int quad8_set_quadrature_mode(struct iio_dev *indio_dev,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -473,15 +520,20 @@ static int quad8_set_index_polarity(struct iio_dev *indio_dev,
 	const struct iio_chan_spec *chan, unsigned int index_polarity)
 {
 	struct quad8_iio *const priv = iio_priv(indio_dev);
-	const unsigned int idr_cfg = priv->synchronous_mode[chan->channel] |
-		index_polarity << 1;
 	const int base_offset = priv->base + 2 * chan->channel + 1;
+	unsigned int idr_cfg = index_polarity << 1;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->synchronous_mode[chan->channel];
 
 	priv->index_polarity[chan->channel] = index_polarity;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -582,7 +634,7 @@ static int quad8_signal_read(struct counter_device *counter,
 static int quad8_count_read(struct counter_device *counter,
 	struct counter_count *count, unsigned long *val)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
 	unsigned int flags;
 	unsigned int borrow;
@@ -596,6 +648,8 @@ static int quad8_count_read(struct counter_device *counter,
 	/* Borrow XOR Carry effectively doubles count range */
 	*val = (unsigned long)(borrow ^ carry) << 24;
 
+	mutex_lock(&priv->lock);
+
 	/* Reset Byte Pointer; transfer Counter to Output Latch */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP | QUAD8_RLD_CNTR_OUT,
 	     base_offset + 1);
@@ -603,13 +657,15 @@ static int quad8_count_read(struct counter_device *counter,
 	for (i = 0; i < 3; i++)
 		*val |= (unsigned long)inb(base_offset) << (8 * i);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
 static int quad8_count_write(struct counter_device *counter,
 	struct counter_count *count, unsigned long val)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
 	const int base_offset = priv->base + 2 * count->id;
 	int i;
 
@@ -617,6 +673,8 @@ static int quad8_count_write(struct counter_device *counter,
 	if (val > 0xFFFFFF)
 		return -EINVAL;
 
+	mutex_lock(&priv->lock);
+
 	/* Reset Byte Pointer */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
 
@@ -640,6 +698,8 @@ static int quad8_count_write(struct counter_device *counter,
 	/* Reset Error flag */
 	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_E, base_offset + 1);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -660,13 +720,13 @@ static enum counter_count_function quad8_count_functions_list[] = {
 static int quad8_function_get(struct counter_device *counter,
 	struct counter_count *count, size_t *function)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
 	const int id = count->id;
-	const unsigned int quadrature_mode = priv->quadrature_mode[id];
-	const unsigned int scale = priv->quadrature_scale[id];
 
-	if (quadrature_mode)
-		switch (scale) {
+	mutex_lock(&priv->lock);
+
+	if (priv->quadrature_mode[id])
+		switch (priv->quadrature_scale[id]) {
 		case 0:
 			*function = QUAD8_COUNT_FUNCTION_QUADRATURE_X1;
 			break;
@@ -680,6 +740,8 @@ static int quad8_function_get(struct counter_device *counter,
 	else
 		*function = QUAD8_COUNT_FUNCTION_PULSE_DIRECTION;
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -690,10 +752,15 @@ static int quad8_function_set(struct counter_device *counter,
 	const int id = count->id;
 	unsigned int *const quadrature_mode = priv->quadrature_mode + id;
 	unsigned int *const scale = priv->quadrature_scale + id;
-	unsigned int mode_cfg = priv->count_mode[id] << 1;
 	unsigned int *const synchronous_mode = priv->synchronous_mode + id;
-	const unsigned int idr_cfg = priv->index_polarity[id] << 1;
 	const int base_offset = priv->base + 2 * id + 1;
+	unsigned int mode_cfg;
+	unsigned int idr_cfg;
+
+	mutex_lock(&priv->lock);
+
+	mode_cfg = priv->count_mode[id] << 1;
+	idr_cfg = priv->index_polarity[id] << 1;
 
 	if (function == QUAD8_COUNT_FUNCTION_PULSE_DIRECTION) {
 		*quadrature_mode = 0;
@@ -729,6 +796,8 @@ static int quad8_function_set(struct counter_device *counter,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -845,15 +914,20 @@ static int quad8_index_polarity_set(struct counter_device *counter,
 {
 	struct quad8_iio *const priv = counter->priv;
 	const size_t channel_id = signal->id - 16;
-	const unsigned int idr_cfg = priv->synchronous_mode[channel_id] |
-		index_polarity << 1;
 	const int base_offset = priv->base + 2 * channel_id + 1;
+	unsigned int idr_cfg = index_polarity << 1;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->synchronous_mode[channel_id];
 
 	priv->index_polarity[channel_id] = index_polarity;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -880,19 +954,26 @@ static int quad8_synchronous_mode_set(struct counter_device *counter,
 {
 	struct quad8_iio *const priv = counter->priv;
 	const size_t channel_id = signal->id - 16;
-	const unsigned int idr_cfg = synchronous_mode |
-		priv->index_polarity[channel_id] << 1;
 	const int base_offset = priv->base + 2 * channel_id + 1;
+	unsigned int idr_cfg = synchronous_mode;
+
+	mutex_lock(&priv->lock);
+
+	idr_cfg |= priv->index_polarity[channel_id] << 1;
 
 	/* Index function must be non-synchronous in non-quadrature mode */
-	if (synchronous_mode && !priv->quadrature_mode[channel_id])
+	if (synchronous_mode && !priv->quadrature_mode[channel_id]) {
+		mutex_unlock(&priv->lock);
 		return -EINVAL;
+	}
 
 	priv->synchronous_mode[channel_id] = synchronous_mode;
 
 	/* Load Index Control configuration to Index Control Register */
 	outb(QUAD8_CTR_IDR | idr_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -957,6 +1038,8 @@ static int quad8_count_mode_set(struct counter_device *counter,
 		break;
 	}
 
+	mutex_lock(&priv->lock);
+
 	priv->count_mode[count->id] = cnt_mode;
 
 	/* Set count mode configuration value */
@@ -969,6 +1052,8 @@ static int quad8_count_mode_set(struct counter_device *counter,
 	/* Load mode configuration to Counter Mode Register */
 	outb(QUAD8_CTR_CMR | mode_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return 0;
 }
 
@@ -1010,6 +1095,8 @@ static ssize_t quad8_count_enable_write(struct counter_device *counter,
 	if (err)
 		return err;
 
+	mutex_lock(&priv->lock);
+
 	priv->ab_enable[count->id] = ab_enable;
 
 	ior_cfg = ab_enable | priv->preset_enable[count->id] << 1;
@@ -1017,6 +1104,8 @@ static ssize_t quad8_count_enable_write(struct counter_device *counter,
 	/* Load I/O control configuration */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset + 1);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -1045,14 +1134,28 @@ static ssize_t quad8_count_preset_read(struct counter_device *counter,
 	return sprintf(buf, "%u\n", priv->preset[count->id]);
 }
 
+static void quad8_preset_register_set(struct quad8_iio *quad8iio, int id,
+		unsigned int preset)
+{
+	const unsigned int base_offset = quad8iio->base + 2 * id;
+	int i;
+
+	quad8iio->preset[id] = preset;
+
+	/* Reset Byte Pointer */
+	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+
+	/* Set Preset Register */
+	for (i = 0; i < 3; i++)
+		outb(preset >> (8 * i), base_offset);
+}
+
 static ssize_t quad8_count_preset_write(struct counter_device *counter,
 	struct counter_count *count, void *private, const char *buf, size_t len)
 {
 	struct quad8_iio *const priv = counter->priv;
-	const int base_offset = priv->base + 2 * count->id;
 	unsigned int preset;
 	int ret;
-	int i;
 
 	ret = kstrtouint(buf, 0, &preset);
 	if (ret)
@@ -1062,14 +1165,11 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
 	if (preset > 0xFFFFFF)
 		return -EINVAL;
 
-	priv->preset[count->id] = preset;
+	mutex_lock(&priv->lock);
 
-	/* Reset Byte Pointer */
-	outb(QUAD8_CTR_RLD | QUAD8_RLD_RESET_BP, base_offset + 1);
+	quad8_preset_register_set(priv, count->id, preset);
 
-	/* Set Preset Register */
-	for (i = 0; i < 3; i++)
-		outb(preset >> (8 * i), base_offset);
+	mutex_unlock(&priv->lock);
 
 	return len;
 }
@@ -1077,15 +1177,20 @@ static ssize_t quad8_count_preset_write(struct counter_device *counter,
 static ssize_t quad8_count_ceiling_read(struct counter_device *counter,
 	struct counter_count *count, void *private, char *buf)
 {
-	const struct quad8_iio *const priv = counter->priv;
+	struct quad8_iio *const priv = counter->priv;
+
+	mutex_lock(&priv->lock);
 
 	/* Range Limit and Modulo-N count modes use preset value as ceiling */
 	switch (priv->count_mode[count->id]) {
 	case 1:
 	case 3:
-		return quad8_count_preset_read(counter, count, private, buf);
+		mutex_unlock(&priv->lock);
+		return sprintf(buf, "%u\n", priv->preset[count->id]);
 	}
 
+	mutex_unlock(&priv->lock);
+
 	/* By default 0x1FFFFFF (25 bits unsigned) is maximum count */
 	return sprintf(buf, "33554431\n");
 }
@@ -1094,15 +1199,29 @@ static ssize_t quad8_count_ceiling_write(struct counter_device *counter,
 	struct counter_count *count, void *private, const char *buf, size_t len)
 {
 	struct quad8_iio *const priv = counter->priv;
+	unsigned int ceiling;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &ceiling);
+	if (ret)
+		return ret;
+
+	/* Only 24-bit values are supported */
+	if (ceiling > 0xFFFFFF)
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
 
 	/* Range Limit and Modulo-N count modes use preset value as ceiling */
 	switch (priv->count_mode[count->id]) {
 	case 1:
 	case 3:
-		return quad8_count_preset_write(counter, count, private, buf,
-						len);
+		quad8_preset_register_set(priv, count->id, ceiling);
+		break;
 	}
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -1130,6 +1249,8 @@ static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
 	/* Preset enable is active low in Input/Output Control register */
 	preset_enable = !preset_enable;
 
+	mutex_lock(&priv->lock);
+
 	priv->preset_enable[count->id] = preset_enable;
 
 	ior_cfg = priv->ab_enable[count->id] | (unsigned int)preset_enable << 1;
@@ -1137,6 +1258,8 @@ static ssize_t quad8_count_preset_enable_write(struct counter_device *counter,
 	/* Load I/O control configuration to Input / Output Control Register */
 	outb(QUAD8_CTR_IOR | ior_cfg, base_offset);
 
+	mutex_unlock(&priv->lock);
+
 	return len;
 }
 
@@ -1307,6 +1430,9 @@ static int quad8_probe(struct device *dev, unsigned int id)
 	quad8iio->counter.priv = quad8iio;
 	quad8iio->base = base[id];
 
+	/* Initialize mutex */
+	mutex_init(&quad8iio->lock);
+
 	/* Reset all counters and disable interrupt function */
 	outb(QUAD8_CHAN_OP_RESET_COUNTERS, base[id] + QUAD8_REG_CHAN_OP);
 	/* Set initial configuration for all counters */
-- 
2.20.1

[PATCH AUTOSEL 5.6 45/79] ASoC: meson: axg-card: fix codec-to-codec link setup

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 1164284270779e1865cc2046a2a01b58a1e858a9 ]

Since the addition of commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow
playback/capture if supported"), meson-axg cards which have codec-to-codec
links fail to init and Oops:

  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128
  Internal error: Oops: 96000044 [#1] PREEMPT SMP
  CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1
  pc : invalidate_paths_ep+0x30/0xe0
  lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
  Call trace:
   invalidate_paths_ep+0x30/0xe0
   snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
   dpcm_path_get+0x38/0xd0
   dpcm_fe_dai_open+0x70/0x920
   snd_pcm_open_substream+0x564/0x840
   snd_pcm_open+0xfc/0x228
   snd_pcm_capture_open+0x4c/0x78
   snd_open+0xac/0x1a8
   ...

While initiliazing the links, ASoC treats the codec-to-codec links of this
card type as a DPCM backend. This error eventually leads to the Oops.

Most of the card driver code is shared between DPCM backends and
codec-to-codec links. The property "no_pcm" marking DCPM BE was left set on
codec-to-codec links, leading to this problem. This commit fixes that.

Fixes: 0a8f1117a680 ("ASoC: meson: axg-card: add basic codec-to-codec link support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200420114511.450560-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-card.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c
index 1f698adde506c..2b04ac3d8fd3b 100644
--- a/sound/soc/meson/axg-card.c
+++ b/sound/soc/meson/axg-card.c
@@ -586,8 +586,10 @@ static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np,
 
 	if (axg_card_cpu_is_tdm_iface(dai_link->cpus->of_node))
 		ret = axg_card_parse_tdm(card, np, index);
-	else if (axg_card_cpu_is_codec(dai_link->cpus->of_node))
+	else if (axg_card_cpu_is_codec(dai_link->cpus->of_node)) {
 		dai_link->params = &codec_params;
+		dai_link->no_pcm = 0; /* link is not a DPCM BE */
+	}
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 45/79] ASoC: meson: axg-card: fix codec-to-codec link setup

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit 1164284270779e1865cc2046a2a01b58a1e858a9 ]

Since the addition of commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow
playback/capture if supported"), meson-axg cards which have codec-to-codec
links fail to init and Oops:

  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000128
  Internal error: Oops: 96000044 [#1] PREEMPT SMP
  CPU: 3 PID: 1582 Comm: arecord Not tainted 5.7.0-rc1
  pc : invalidate_paths_ep+0x30/0xe0
  lr : snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
  Call trace:
   invalidate_paths_ep+0x30/0xe0
   snd_soc_dapm_dai_get_connected_widgets+0x170/0x1a8
   dpcm_path_get+0x38/0xd0
   dpcm_fe_dai_open+0x70/0x920
   snd_pcm_open_substream+0x564/0x840
   snd_pcm_open+0xfc/0x228
   snd_pcm_capture_open+0x4c/0x78
   snd_open+0xac/0x1a8
   ...

While initiliazing the links, ASoC treats the codec-to-codec links of this
card type as a DPCM backend. This error eventually leads to the Oops.

Most of the card driver code is shared between DPCM backends and
codec-to-codec links. The property "no_pcm" marking DCPM BE was left set on
codec-to-codec links, leading to this problem. This commit fixes that.

Fixes: 0a8f1117a680 ("ASoC: meson: axg-card: add basic codec-to-codec link support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200420114511.450560-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-card.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/soc/meson/axg-card.c b/sound/soc/meson/axg-card.c
index 1f698adde506c..2b04ac3d8fd3b 100644
--- a/sound/soc/meson/axg-card.c
+++ b/sound/soc/meson/axg-card.c
@@ -586,8 +586,10 @@ static int axg_card_add_link(struct snd_soc_card *card, struct device_node *np,
 
 	if (axg_card_cpu_is_tdm_iface(dai_link->cpus->of_node))
 		ret = axg_card_parse_tdm(card, np, index);
-	else if (axg_card_cpu_is_codec(dai_link->cpus->of_node))
+	else if (axg_card_cpu_is_codec(dai_link->cpus->of_node)) {
 		dai_link->params = &codec_params;
+		dai_link->no_pcm = 0; /* link is not a DPCM BE */
+	}
 
 	return ret;
 }
-- 
2.20.1

Re: [PATCH AUTOSEL 5.6 45/79] ASoC: meson: axg-card: fix codec-to-codec link setup

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 349 bytes --]

On Thu, Apr 30, 2020 at 09:50:09AM -0400, Sasha Levin wrote:

> Since the addition of commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow
> playback/capture if supported"), meson-axg cards which have codec-to-codec
> links fail to init and Oops:

This clearly describes the issue as only being present after the above
commit which is not in v5.6.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH AUTOSEL 5.6 45/79] ASoC: meson: axg-card: fix codec-to-codec link setup

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 349 bytes --]

On Thu, Apr 30, 2020 at 09:50:09AM -0400, Sasha Levin wrote:

> Since the addition of commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow
> playback/capture if supported"), meson-axg cards which have codec-to-codec
> links fail to init and Oops:

This clearly describes the issue as only being present after the above
commit which is not in v5.6.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH AUTOSEL 5.6 45/79] ASoC: meson: axg-card: fix codec-to-codec link setup

[Sasha Levin]

On Thu, Apr 30, 2020 at 02:56:10PM +0100, Mark Brown wrote:
>On Thu, Apr 30, 2020 at 09:50:09AM -0400, Sasha Levin wrote:
>
>> Since the addition of commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow
>> playback/capture if supported"), meson-axg cards which have codec-to-codec
>> links fail to init and Oops:
>
>This clearly describes the issue as only being present after the above
>commit which is not in v5.6.

Uh, I thought that the fixes tag points to the same commit as mentioned
in the description... I'll drop it, sorry.

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 5.6 45/79] ASoC: meson: axg-card: fix codec-to-codec link setup

[Sasha Levin]

On Thu, Apr 30, 2020 at 02:56:10PM +0100, Mark Brown wrote:
>On Thu, Apr 30, 2020 at 09:50:09AM -0400, Sasha Levin wrote:
>
>> Since the addition of commit 9b5db059366a ("ASoC: soc-pcm: dpcm: Only allow
>> playback/capture if supported"), meson-axg cards which have codec-to-codec
>> links fail to init and Oops:
>
>This clearly describes the issue as only being present after the above
>commit which is not in v5.6.

Uh, I thought that the fixes tag points to the same commit as mentioned
in the description... I'll drop it, sorry.

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.6 46/79] ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent

[Sasha Levin]

From: Matthias Blankertz <matthias.blankertz@cetitec.com>

[ Upstream commit 0c258657ddfe81b4fc0183378d800c97ba0b7cdd ]

The master SSI of a multi-SSI setup was attached both to the
RSND_MOD_SSI slot and the RSND_MOD_SSIP slot of the rsnd_dai_stream.
This is not correct wrt. the meaning of being "parent" in the rest of
the SSI code, where it seems to indicate an SSI that provides clock and
word sync but is not transmitting/receiving audio data.

Not treating the multi-SSI master as parent allows removal of various
special cases to the rsnd_ssi_is_parent conditions introduced in commit
a09fb3f28a60 ("ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode").
It also fixes the issue that operations performed via rsnd_dai_call()
were performed twice for the master SSI. This caused some "status check
failed" spam when stopping a multi-SSI stream as the driver attempted to
stop the master SSI twice.

Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssi.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index d51fb3a394486..9900a4f6f4e53 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -407,7 +407,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod,
 	 * We shouldn't exchange SWSP after running.
 	 * This means, parent needs to care it.
 	 */
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		goto init_end;
 
 	if (rsnd_io_is_play(io))
@@ -559,7 +559,7 @@ static int rsnd_ssi_start(struct rsnd_mod *mod,
 	 * EN is for data output.
 	 * SSI parent EN is not needed.
 	 */
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		return 0;
 
 	ssi->cr_en = EN;
@@ -582,7 +582,7 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
 	if (!rsnd_ssi_is_run_mods(mod, io))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		return 0;
 
 	cr  =	ssi->cr_own	|
@@ -620,7 +620,7 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod,
 	if (rsnd_is_gen1(priv))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		return 0;
 
 	if (!rsnd_ssi_is_run_mods(mod, io))
@@ -737,6 +737,9 @@ static void rsnd_ssi_parent_attach(struct rsnd_mod *mod,
 	if (!rsnd_rdai_is_clk_master(rdai))
 		return;
 
+	if (rsnd_ssi_is_multi_slave(mod, io))
+		return;
+
 	switch (rsnd_mod_id(mod)) {
 	case 1:
 	case 2:
-- 
2.20.1

[PATCH AUTOSEL 5.6 46/79] ASoC: rsnd: Don't treat master SSI in multi SSI setup as parent

[Sasha Levin]

From: Matthias Blankertz <matthias.blankertz@cetitec.com>

[ Upstream commit 0c258657ddfe81b4fc0183378d800c97ba0b7cdd ]

The master SSI of a multi-SSI setup was attached both to the
RSND_MOD_SSI slot and the RSND_MOD_SSIP slot of the rsnd_dai_stream.
This is not correct wrt. the meaning of being "parent" in the rest of
the SSI code, where it seems to indicate an SSI that provides clock and
word sync but is not transmitting/receiving audio data.

Not treating the multi-SSI master as parent allows removal of various
special cases to the rsnd_ssi_is_parent conditions introduced in commit
a09fb3f28a60 ("ASoC: rsnd: Fix parent SSI start/stop in multi-SSI mode").
It also fixes the issue that operations performed via rsnd_dai_call()
were performed twice for the master SSI. This caused some "status check
failed" spam when stopping a multi-SSI stream as the driver attempted to
stop the master SSI twice.

Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-2-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssi.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index d51fb3a394486..9900a4f6f4e53 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -407,7 +407,7 @@ static void rsnd_ssi_config_init(struct rsnd_mod *mod,
 	 * We shouldn't exchange SWSP after running.
 	 * This means, parent needs to care it.
 	 */
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		goto init_end;
 
 	if (rsnd_io_is_play(io))
@@ -559,7 +559,7 @@ static int rsnd_ssi_start(struct rsnd_mod *mod,
 	 * EN is for data output.
 	 * SSI parent EN is not needed.
 	 */
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		return 0;
 
 	ssi->cr_en = EN;
@@ -582,7 +582,7 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
 	if (!rsnd_ssi_is_run_mods(mod, io))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		return 0;
 
 	cr  =	ssi->cr_own	|
@@ -620,7 +620,7 @@ static int rsnd_ssi_irq(struct rsnd_mod *mod,
 	if (rsnd_is_gen1(priv))
 		return 0;
 
-	if (rsnd_ssi_is_parent(mod, io) && !rsnd_ssi_multi_slaves(io))
+	if (rsnd_ssi_is_parent(mod, io))
 		return 0;
 
 	if (!rsnd_ssi_is_run_mods(mod, io))
@@ -737,6 +737,9 @@ static void rsnd_ssi_parent_attach(struct rsnd_mod *mod,
 	if (!rsnd_rdai_is_clk_master(rdai))
 		return;
 
+	if (rsnd_ssi_is_multi_slave(mod, io))
+		return;
+
 	switch (rsnd_mod_id(mod)) {
 	case 1:
 	case 2:
-- 
2.20.1

[PATCH AUTOSEL 5.6 47/79] ASoC: rsnd: Fix "status check failed" spam for multi-SSI

[Sasha Levin]

From: Matthias Blankertz <matthias.blankertz@cetitec.com>

[ Upstream commit 54cb6221688660670a2e430892d7f4e6370263b8 ]

Fix the rsnd_ssi_stop function to skip disabling the individual SSIs of
a multi-SSI setup, as the actual stop is performed by rsnd_ssiu_stop_gen2
- the same logic as in rsnd_ssi_start. The attempt to disable these SSIs
was harmless, but caused a "status check failed" message to be printed
for every SSI in the multi-SSI setup.
The disabling of interrupts is still performed, as they are enabled for
all SSIs in rsnd_ssi_init, but care is taken to not accidentally set the
EN bit for an SSI where it was not set by rsnd_ssi_start.

Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 9900a4f6f4e53..4a7d3413917fc 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -594,10 +594,16 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
 	 * Capture:  It might not receave data. Do nothing
 	 */
 	if (rsnd_io_is_play(io)) {
-		rsnd_mod_write(mod, SSICR, cr | EN);
+		rsnd_mod_write(mod, SSICR, cr | ssi->cr_en);
 		rsnd_ssi_status_check(mod, DIRQ);
 	}
 
+	/* In multi-SSI mode, stop is performed by setting ssi0129 in
+	 * SSI_CONTROL to 0 (in rsnd_ssio_stop_gen2). Do nothing here.
+	 */
+	if (rsnd_ssi_multi_slaves_runtime(io))
+		return 0;
+
 	/*
 	 * disable SSI,
 	 * and, wait idle state
-- 
2.20.1

[PATCH AUTOSEL 5.6 47/79] ASoC: rsnd: Fix "status check failed" spam for multi-SSI

[Sasha Levin]

From: Matthias Blankertz <matthias.blankertz@cetitec.com>

[ Upstream commit 54cb6221688660670a2e430892d7f4e6370263b8 ]

Fix the rsnd_ssi_stop function to skip disabling the individual SSIs of
a multi-SSI setup, as the actual stop is performed by rsnd_ssiu_stop_gen2
- the same logic as in rsnd_ssi_start. The attempt to disable these SSIs
was harmless, but caused a "status check failed" message to be printed
for every SSI in the multi-SSI setup.
The disabling of interrupts is still performed, as they are enabled for
all SSIs in rsnd_ssi_init, but care is taken to not accidentally set the
EN bit for an SSI where it was not set by rsnd_ssi_start.

Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200417153017.1744454-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/ssi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 9900a4f6f4e53..4a7d3413917fc 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -594,10 +594,16 @@ static int rsnd_ssi_stop(struct rsnd_mod *mod,
 	 * Capture:  It might not receave data. Do nothing
 	 */
 	if (rsnd_io_is_play(io)) {
-		rsnd_mod_write(mod, SSICR, cr | EN);
+		rsnd_mod_write(mod, SSICR, cr | ssi->cr_en);
 		rsnd_ssi_status_check(mod, DIRQ);
 	}
 
+	/* In multi-SSI mode, stop is performed by setting ssi0129 in
+	 * SSI_CONTROL to 0 (in rsnd_ssio_stop_gen2). Do nothing here.
+	 */
+	if (rsnd_ssi_multi_slaves_runtime(io))
+		return 0;
+
 	/*
 	 * disable SSI,
 	 * and, wait idle state
-- 
2.20.1

[PATCH AUTOSEL 5.6 48/79] net/mlx5: Fix failing fw tracer allocation on s390

[Sasha Levin]

From: Niklas Schnelle <schnelle@linux.ibm.com>

[ Upstream commit a019b36123aec9700b21ae0724710f62928a8bc1 ]

On s390 FORCE_MAX_ZONEORDER is 9 instead of 11, thus a larger kzalloc()
allocation as done for the firmware tracer will always fail.

Looking at mlx5_fw_tracer_save_trace(), it is actually the driver itself
that copies the debug data into the trace array and there is no need for
the allocation to be contiguous in physical memory. We can therefor use
kvzalloc() instead of kzalloc() and get rid of the large contiguous
allcoation.

Fixes: f53aaa31cce7 ("net/mlx5: FW tracer, implement tracer logic")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
index 94d7b69a95c74..eb2e57ff08a60 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c
@@ -935,7 +935,7 @@ struct mlx5_fw_tracer *mlx5_fw_tracer_create(struct mlx5_core_dev *dev)
 		return NULL;
 	}
 
-	tracer = kzalloc(sizeof(*tracer), GFP_KERNEL);
+	tracer = kvzalloc(sizeof(*tracer), GFP_KERNEL);
 	if (!tracer)
 		return ERR_PTR(-ENOMEM);
 
@@ -982,7 +982,7 @@ destroy_workqueue:
 	tracer->dev = NULL;
 	destroy_workqueue(tracer->work_queue);
 free_tracer:
-	kfree(tracer);
+	kvfree(tracer);
 	return ERR_PTR(err);
 }
 
@@ -1061,7 +1061,7 @@ void mlx5_fw_tracer_destroy(struct mlx5_fw_tracer *tracer)
 	mlx5_fw_tracer_destroy_log_buf(tracer);
 	flush_workqueue(tracer->work_queue);
 	destroy_workqueue(tracer->work_queue);
-	kfree(tracer);
+	kvfree(tracer);
 }
 
 static int fw_tracer_event(struct notifier_block *nb, unsigned long action, void *data)
-- 
2.20.1

[PATCH AUTOSEL 5.6 49/79] net/mlx5e: Don't trigger IRQ multiple times on XSK wakeup to avoid WQ overruns

[Sasha Levin]

From: Maxim Mikityanskiy <maximmi@mellanox.com>

[ Upstream commit e7e0004abdd6f83ae4be5613b29ed396beff576c ]

XSK wakeup function triggers NAPI by posting a NOP WQE to a special XSK
ICOSQ. When the application floods the driver with wakeup requests by
calling sendto() in a certain pattern that ends up in mlx5e_trigger_irq,
the XSK ICOSQ may overflow.

Multiple NOPs are not required and won't accelerate the process, so
avoid posting a second NOP if there is one already on the way. This way
we also avoid increasing the queue size (which might not help anyway).

Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en.h        | 3 ++-
 drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c | 3 +++
 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c     | 8 +++++---
 drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c   | 6 +++++-
 4 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
index ddd2409fc8bef..5a5e6a21c6e1f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
@@ -367,6 +367,7 @@ enum {
 	MLX5E_SQ_STATE_AM,
 	MLX5E_SQ_STATE_TLS,
 	MLX5E_SQ_STATE_VLAN_NEED_L2_INLINE,
+	MLX5E_SQ_STATE_PENDING_XSK_TX,
 };
 
 struct mlx5e_sq_wqe_info {
@@ -950,7 +951,7 @@ void mlx5e_page_release_dynamic(struct mlx5e_rq *rq,
 void mlx5e_handle_rx_cqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe);
 void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe);
 bool mlx5e_post_rx_wqes(struct mlx5e_rq *rq);
-void mlx5e_poll_ico_cq(struct mlx5e_cq *cq);
+int mlx5e_poll_ico_cq(struct mlx5e_cq *cq);
 bool mlx5e_post_rx_mpwqes(struct mlx5e_rq *rq);
 void mlx5e_dealloc_rx_wqe(struct mlx5e_rq *rq, u16 ix);
 void mlx5e_dealloc_rx_mpwqe(struct mlx5e_rq *rq, u16 ix);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c
index fe2d596cb361f..3bcdb5b2fc203 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/xsk/tx.c
@@ -33,6 +33,9 @@ int mlx5e_xsk_wakeup(struct net_device *dev, u32 qid, u32 flags)
 		if (unlikely(!test_bit(MLX5E_SQ_STATE_ENABLED, &c->xskicosq.state)))
 			return 0;
 
+		if (test_and_set_bit(MLX5E_SQ_STATE_PENDING_XSK_TX, &c->xskicosq.state))
+			return 0;
+
 		spin_lock(&c->xskicosq_lock);
 		mlx5e_trigger_irq(&c->xskicosq);
 		spin_unlock(&c->xskicosq_lock);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
index 312d4692425b7..a9a96a630e4d6 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rx.c
@@ -587,7 +587,7 @@ bool mlx5e_post_rx_wqes(struct mlx5e_rq *rq)
 	return !!err;
 }
 
-void mlx5e_poll_ico_cq(struct mlx5e_cq *cq)
+int mlx5e_poll_ico_cq(struct mlx5e_cq *cq)
 {
 	struct mlx5e_icosq *sq = container_of(cq, struct mlx5e_icosq, cq);
 	struct mlx5_cqe64 *cqe;
@@ -595,11 +595,11 @@ void mlx5e_poll_ico_cq(struct mlx5e_cq *cq)
 	int i;
 
 	if (unlikely(!test_bit(MLX5E_SQ_STATE_ENABLED, &sq->state)))
-		return;
+		return 0;
 
 	cqe = mlx5_cqwq_get_cqe(&cq->wq);
 	if (likely(!cqe))
-		return;
+		return 0;
 
 	/* sq->cc must be updated only after mlx5_cqwq_update_db_record(),
 	 * otherwise a cq overrun may occur
@@ -648,6 +648,8 @@ void mlx5e_poll_ico_cq(struct mlx5e_cq *cq)
 	sq->cc = sqcc;
 
 	mlx5_cqwq_update_db_record(&cq->wq);
+
+	return i;
 }
 
 bool mlx5e_post_rx_mpwqes(struct mlx5e_rq *rq)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
index 800d34ed8a96c..76efa9579215c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
@@ -145,7 +145,11 @@ int mlx5e_napi_poll(struct napi_struct *napi, int budget)
 
 	busy |= rq->post_wqes(rq);
 	if (xsk_open) {
-		mlx5e_poll_ico_cq(&c->xskicosq.cq);
+		if (mlx5e_poll_ico_cq(&c->xskicosq.cq))
+			/* Don't clear the flag if nothing was polled to prevent
+			 * queueing more WQEs and overflowing XSKICOSQ.
+			 */
+			clear_bit(MLX5E_SQ_STATE_PENDING_XSK_TX, &c->xskicosq.state);
 		busy |= mlx5e_poll_xdpsq_cq(&xsksq->cq);
 		busy_xsk |= mlx5e_napi_xsk_post(xsksq, xskrq);
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.6 50/79] net/mlx5e: Get the latest values from counters in switchdev mode

[Sasha Levin]

From: Zhu Yanjun <yanjunz@mellanox.com>

[ Upstream commit dcdf4ce0ff4ba206fc362e149c8ae81d6a2f849c ]

In the switchdev mode, when running "cat
/sys/class/net/NIC/statistics/tx_packets", the ppcnt register is
accessed to get the latest values. But currently this command can
not get the correct values from ppcnt.

From firmware manual, before getting the 802_3 counters, the 802_3
data layout should be set to the ppcnt register.

When the command "cat /sys/class/net/NIC/statistics/tx_packets" is
run, before updating 802_3 data layout with ppcnt register, the
monitor counters are tested. The test result will decide the
802_3 data layout is updated or not.

Actually the monitor counters do not support to monitor rx/tx
stats of 802_3 in switchdev mode. So the rx/tx counters change
will not trigger monitor counters. So the 802_3 data layout will
not be updated in ppcnt register. Finally this command can not get
the latest values from ppcnt register with 802_3 data layout.

Fixes: 5c7e8bbb0257 ("net/mlx5e: Use monitor counters for update stats")
Signed-off-by: Zhu Yanjun <yanjunz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 2650739964326..d02db5aebac45 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -3568,7 +3568,12 @@ mlx5e_get_stats(struct net_device *dev, struct rtnl_link_stats64 *stats)
 	struct mlx5e_vport_stats *vstats = &priv->stats.vport;
 	struct mlx5e_pport_stats *pstats = &priv->stats.pport;
 
-	if (!mlx5e_monitor_counter_supported(priv)) {
+	/* In switchdev mode, monitor counters doesn't monitor
+	 * rx/tx stats of 802_3. The update stats mechanism
+	 * should keep the 802_3 layout counters updated
+	 */
+	if (!mlx5e_monitor_counter_supported(priv) ||
+	    mlx5e_is_uplink_rep(priv)) {
 		/* update HW stats in background for next time */
 		mlx5e_queue_update_stats(priv);
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.6 51/79] cpumap: Avoid warning when CONFIG_DEBUG_PER_CPU_MAPS is enabled

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit bc23d0e3f717ced21fbfacab3ab887d55e5ba367 ]

When the kernel is built with CONFIG_DEBUG_PER_CPU_MAPS, the cpumap code
can trigger a spurious warning if CONFIG_CPUMASK_OFFSTACK is also set. This
happens because in this configuration, NR_CPUS can be larger than
nr_cpumask_bits, so the initial check in cpu_map_alloc() is not sufficient
to guard against hitting the warning in cpumask_check().

Fix this by explicitly checking the supplied key against the
nr_cpumask_bits variable before calling cpu_possible().

Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Xiumei Mu <xmu@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200416083120.453718-1-toke@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/cpumap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/bpf/cpumap.c b/kernel/bpf/cpumap.c
index 70f71b154fa57..3fe0b006d2d2e 100644
--- a/kernel/bpf/cpumap.c
+++ b/kernel/bpf/cpumap.c
@@ -469,7 +469,7 @@ static int cpu_map_update_elem(struct bpf_map *map, void *key, void *value,
 		return -EOVERFLOW;
 
 	/* Make sure CPU is a valid possible cpu */
-	if (!cpu_possible(key_cpu))
+	if (key_cpu >= nr_cpumask_bits || !cpu_possible(key_cpu))
 		return -ENODEV;
 
 	if (qsize == 0) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 52/79] bpf: Forbid XADD on spilled pointers for unprivileged users

[Sasha Levin]

From: Jann Horn <jannh@google.com>

[ Upstream commit 6e7e63cbb023976d828cdb22422606bf77baa8a9 ]

When check_xadd() verifies an XADD operation on a pointer to a stack slot
containing a spilled pointer, check_stack_read() verifies that the read,
which is part of XADD, is valid. However, since the placeholder value -1 is
passed as `value_regno`, check_stack_read() can only return a binary
decision and can't return the type of the value that was read. The intent
here is to verify whether the value read from the stack slot may be used as
a SCALAR_VALUE; but since check_stack_read() doesn't check the type, and
the type information is lost when check_stack_read() returns, this is not
enforced, and a malicious user can abuse XADD to leak spilled kernel
pointers.

Fix it by letting check_stack_read() verify that the value is usable as a
SCALAR_VALUE if no type information is passed to the caller.

To be able to use __is_pointer_value() in check_stack_read(), move it up.

Fix up the expected unprivileged error message for a BPF selftest that,
until now, assumed that unprivileged users can use XADD on stack-spilled
pointers. This also gives us a test for the behavior introduced in this
patch for free.

In theory, this could also be fixed by forbidding XADD on stack spills
entirely, since XADD is a locked operation (for operations on memory with
concurrency) and there can't be any concurrency on the BPF stack; but
Alexei has said that he wants to keep XADD on stack slots working to avoid
changes to the test suite [1].

The following BPF program demonstrates how to leak a BPF map pointer as an
unprivileged user using this bug:

    // r7 = map_pointer
    BPF_LD_MAP_FD(BPF_REG_7, small_map),
    // r8 = launder(map_pointer)
    BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_7, -8),
    BPF_MOV64_IMM(BPF_REG_1, 0),
    ((struct bpf_insn) {
      .code  = BPF_STX | BPF_DW | BPF_XADD,
      .dst_reg = BPF_REG_FP,
      .src_reg = BPF_REG_1,
      .off = -8
    }),
    BPF_LDX_MEM(BPF_DW, BPF_REG_8, BPF_REG_FP, -8),

    // store r8 into map
    BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_7),
    BPF_MOV64_REG(BPF_REG_ARG2, BPF_REG_FP),
    BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG2, -4),
    BPF_ST_MEM(BPF_W, BPF_REG_ARG2, 0, 0),
    BPF_EMIT_CALL(BPF_FUNC_map_lookup_elem),
    BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, 1),
    BPF_EXIT_INSN(),
    BPF_STX_MEM(BPF_DW, BPF_REG_0, BPF_REG_8, 0),

    BPF_MOV64_IMM(BPF_REG_0, 0),
    BPF_EXIT_INSN()

[1] https://lore.kernel.org/bpf/20200416211116.qxqcza5vo2ddnkdq@ast-mbp.dhcp.thefacebook.com/

Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200417000007.10734-1-jannh@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c                         | 28 +++++++++++++------
 .../bpf/verifier/value_illegal_alu.c          |  1 +
 2 files changed, 20 insertions(+), 9 deletions(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index e5d12c54b552c..e4357a301fb8f 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -1918,6 +1918,15 @@ static bool register_is_const(struct bpf_reg_state *reg)
 	return reg->type == SCALAR_VALUE && tnum_is_const(reg->var_off);
 }
 
+static bool __is_pointer_value(bool allow_ptr_leaks,
+			       const struct bpf_reg_state *reg)
+{
+	if (allow_ptr_leaks)
+		return false;
+
+	return reg->type != SCALAR_VALUE;
+}
+
 static void save_register_state(struct bpf_func_state *state,
 				int spi, struct bpf_reg_state *reg)
 {
@@ -2108,6 +2117,16 @@ static int check_stack_read(struct bpf_verifier_env *env,
 			 * which resets stack/reg liveness for state transitions
 			 */
 			state->regs[value_regno].live |= REG_LIVE_WRITTEN;
+		} else if (__is_pointer_value(env->allow_ptr_leaks, reg)) {
+			/* If value_regno==-1, the caller is asking us whether
+			 * it is acceptable to use this value as a SCALAR_VALUE
+			 * (e.g. for XADD).
+			 * We must not allow unprivileged callers to do that
+			 * with spilled pointers.
+			 */
+			verbose(env, "leaking pointer from stack off %d\n",
+				off);
+			return -EACCES;
 		}
 		mark_reg_read(env, reg, reg->parent, REG_LIVE_READ64);
 	} else {
@@ -2473,15 +2492,6 @@ static int check_sock_access(struct bpf_verifier_env *env, int insn_idx,
 	return -EACCES;
 }
 
-static bool __is_pointer_value(bool allow_ptr_leaks,
-			       const struct bpf_reg_state *reg)
-{
-	if (allow_ptr_leaks)
-		return false;
-
-	return reg->type != SCALAR_VALUE;
-}
-
 static struct bpf_reg_state *reg_state(struct bpf_verifier_env *env, int regno)
 {
 	return cur_regs(env) + regno;
diff --git a/tools/testing/selftests/bpf/verifier/value_illegal_alu.c b/tools/testing/selftests/bpf/verifier/value_illegal_alu.c
index 7f6c232cd8423..ed1c2cea1dea6 100644
--- a/tools/testing/selftests/bpf/verifier/value_illegal_alu.c
+++ b/tools/testing/selftests/bpf/verifier/value_illegal_alu.c
@@ -88,6 +88,7 @@
 	BPF_EXIT_INSN(),
 	},
 	.fixup_map_hash_48b = { 3 },
+	.errstr_unpriv = "leaking pointer from stack off -8",
 	.errstr = "R0 invalid mem access 'inv'",
 	.result = REJECT,
 	.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
-- 
2.20.1

[PATCH AUTOSEL 5.6 53/79] bpf: Fix handling of XADD on BTF memory

[Sasha Levin]

From: Jann Horn <jannh@google.com>

[ Upstream commit 8ff3571f7e1bf3f293cc5e3dc14f2943f4fa7fcf ]

check_xadd() can cause check_ptr_to_btf_access() to be executed with
atype==BPF_READ and value_regno==-1 (meaning "just check whether the access
is okay, don't tell me what type it will result in").
Handle that case properly and skip writing type information, instead of
indexing into the registers at index -1 and writing into out-of-bounds
memory.

Note that at least at the moment, you can't actually write through a BTF
pointer, so check_xadd() will reject the program after calling
check_ptr_to_btf_access with atype==BPF_WRITE; but that's after the
verifier has already corrupted memory.

This patch assumes that BTF pointers are not available in unprivileged
programs.

Fixes: 9e15db66136a ("bpf: Implement accurate raw_tp context access via BTF")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200417000007.10734-2-jannh@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index e4357a301fb8f..1381913cb10ba 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2885,7 +2885,7 @@ static int check_ptr_to_btf_access(struct bpf_verifier_env *env,
 	if (ret < 0)
 		return ret;
 
-	if (atype == BPF_READ) {
+	if (atype == BPF_READ && value_regno >= 0) {
 		if (ret == SCALAR_VALUE) {
 			mark_reg_unknown(env, regs, value_regno);
 			return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.6 54/79] bpf, x86: Fix encoding for lower 8-bit registers in BPF_STX BPF_B

[Sasha Levin]

From: Luke Nelson <lukenels@cs.washington.edu>

[ Upstream commit aee194b14dd2b2bde6252b3acf57d36dccfc743a ]

This patch fixes an encoding bug in emit_stx for BPF_B when the source
register is BPF_REG_FP.

The current implementation for BPF_STX BPF_B in emit_stx saves one REX
byte when the operands can be encoded using Mod-R/M alone. The lower 8
bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using
a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers,
(e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit
equivalents (%sil, %dil, %bpl, %spl).

The current code checks if the source for BPF_STX BPF_B is BPF_REG_1
or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the
required REX prefix. However, it misses the case when the source is
BPF_REG_FP (mapped to %rbp).

The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand
will read from register %ch instead of the correct %bpl. This patch fixes
the problem by fixing and refactoring the check on which registers need
the extra REX byte. Since no BPF registers map to %rsp, there is no need
to handle %spl.

Fixes: 622582786c9e0 ("net: filter: x86: internal BPF JIT")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200418232655.23870-1-luke.r.nels@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/net/bpf_jit_comp.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 9ba08e9abc094..6aa53c33b4712 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -158,6 +158,19 @@ static bool is_ereg(u32 reg)
 			     BIT(BPF_REG_AX));
 }
 
+/*
+ * is_ereg_8l() == true if BPF register 'reg' is mapped to access x86-64
+ * lower 8-bit registers dil,sil,bpl,spl,r8b..r15b, which need extra byte
+ * of encoding. al,cl,dl,bl have simpler encoding.
+ */
+static bool is_ereg_8l(u32 reg)
+{
+	return is_ereg(reg) ||
+	    (1 << reg) & (BIT(BPF_REG_1) |
+			  BIT(BPF_REG_2) |
+			  BIT(BPF_REG_FP));
+}
+
 static bool is_axreg(u32 reg)
 {
 	return reg == BPF_REG_0;
@@ -598,9 +611,8 @@ static void emit_stx(u8 **pprog, u32 size, u32 dst_reg, u32 src_reg, int off)
 	switch (size) {
 	case BPF_B:
 		/* Emit 'mov byte ptr [rax + off], al' */
-		if (is_ereg(dst_reg) || is_ereg(src_reg) ||
-		    /* We have to add extra byte for x86 SIL, DIL regs */
-		    src_reg == BPF_REG_1 || src_reg == BPF_REG_2)
+		if (is_ereg(dst_reg) || is_ereg_8l(src_reg))
+			/* Add extra byte for eregs or SIL,DIL,BPL in src_reg */
 			EMIT2(add_2mod(0x40, dst_reg, src_reg), 0x88);
 		else
 			EMIT1(0x88);
-- 
2.20.1

[PATCH AUTOSEL 5.6 55/79] iwlwifi: actually check allocated conf_tlv pointer

[Sasha Levin]

From: Chris Rorvick <chris@rorvick.com>

[ Upstream commit a176e114ace4cca7df0e34b4bd90c301cdc6d653 ]

Commit 71bc0334a637 ("iwlwifi: check allocated pointer when allocating
conf_tlvs") attempted to fix a typoe introduced by commit 17b809c9b22e
("iwlwifi: dbg: move debug data to a struct") but does not implement the
check correctly.

Fixes: 71bc0334a637 ("iwlwifi: check allocated pointer when allocating conf_tlvs")
Tweeted-by: @grsecurity
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200417074558.12316-1-sedat.dilek@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/iwl-drv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
index 0481796f75bc4..c24350222133d 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-drv.c
@@ -1467,7 +1467,7 @@ static void iwl_req_fw_callback(const struct firmware *ucode_raw, void *context)
 				kmemdup(pieces->dbg_conf_tlv[i],
 					pieces->dbg_conf_tlv_len[i],
 					GFP_KERNEL);
-			if (!pieces->dbg_conf_tlv[i])
+			if (!drv->fw.dbg.conf_tlv[i])
 				goto out_free_fw;
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.6 56/79] ASoC: wm8960: Fix wrong clock after suspend & resume

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 1e060a453c8604311fb45ae2f84f67ed673329b4 ]

After suspend & resume, wm8960_hw_params may be called when
bias_level is not SND_SOC_BIAS_ON, then wm8960_configure_clocking
is not called. But if sample rate is changed at that time, then
the output clock rate will be not correct.

So judgement of bias_level is SND_SOC_BIAS_ON in wm8960_hw_params
is not necessary and it causes above issue.

Fixes: 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1587468525-27514-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8960.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 55112c1bba5e7..6cf0f6612bdaf 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -860,8 +860,7 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream,
 
 	wm8960->is_stream_in_use[tx] = true;
 
-	if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_ON &&
-	    !wm8960->is_stream_in_use[!tx])
+	if (!wm8960->is_stream_in_use[!tx])
 		return wm8960_configure_clocking(component);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.6 56/79] ASoC: wm8960: Fix wrong clock after suspend & resume

[Sasha Levin]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit 1e060a453c8604311fb45ae2f84f67ed673329b4 ]

After suspend & resume, wm8960_hw_params may be called when
bias_level is not SND_SOC_BIAS_ON, then wm8960_configure_clocking
is not called. But if sample rate is changed at that time, then
the output clock rate will be not correct.

So judgement of bias_level is SND_SOC_BIAS_ON in wm8960_hw_params
is not necessary and it causes above issue.

Fixes: 3176bf2d7ccd ("ASoC: wm8960: update pll and clock setting function")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1587468525-27514-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm8960.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 55112c1bba5e7..6cf0f6612bdaf 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -860,8 +860,7 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream,
 
 	wm8960->is_stream_in_use[tx] = true;
 
-	if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_ON &&
-	    !wm8960->is_stream_in_use[!tx])
+	if (!wm8960->is_stream_in_use[!tx])
 		return wm8960_configure_clocking(component);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.6 57/79] cifs: protect updating server->dstaddr with a spinlock

[Sasha Levin]

From: Ronnie Sahlberg <lsahlber@redhat.com>

[ Upstream commit fada37f6f62995cc449b36ebba1220594bfe55fe ]

We use a spinlock while we are reading and accessing the destination address for a server.
We need to also use this spinlock to protect when we are modifying this address from
reconn_set_ipaddr().

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/connect.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 4804d1df8c1cf..d4a23b48e24d8 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -375,8 +375,10 @@ static int reconn_set_ipaddr(struct TCP_Server_Info *server)
 		return rc;
 	}
 
+	spin_lock(&cifs_tcp_ses_lock);
 	rc = cifs_convert_address((struct sockaddr *)&server->dstaddr, ipaddr,
 				  strlen(ipaddr));
+	spin_unlock(&cifs_tcp_ses_lock);
 	kfree(ipaddr);
 
 	return !rc ? -1 : 0;
-- 
2.20.1

[PATCH AUTOSEL 5.6 58/79] blk-iocost: Fix error on iocost_ioc_vrate_adj

[Sasha Levin]

From: Waiman Long <longman@redhat.com>

[ Upstream commit d6c8e949a35d6906d6c03a50e9a9cdf4e494528a ]

Systemtap 4.2 is unable to correctly interpret the "u32 (*missed_ppm)[2]"
argument of the iocost_ioc_vrate_adj trace entry defined in
include/trace/events/iocost.h leading to the following error:

  /tmp/stapAcz0G0/stap_c89c58b83cea1724e26395efa9ed4939_6321_aux_6.c:78:8:
  error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token
   , u32[]* __tracepoint_arg_missed_ppm

That argument type is indeed rather complex and hard to read. Looking
at block/blk-iocost.c. It is just a 2-entry u32 array. By simplifying
the argument to a simple "u32 *missed_ppm" and adjusting the trace
entry accordingly, the compilation error was gone.

Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/blk-iocost.c            | 4 ++--
 include/trace/events/iocost.h | 6 +++---
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/block/blk-iocost.c b/block/blk-iocost.c
index 9a599cc28c290..2dc5dc54e257f 100644
--- a/block/blk-iocost.c
+++ b/block/blk-iocost.c
@@ -1594,7 +1594,7 @@ skip_surplus_transfers:
 				      vrate_min, vrate_max);
 		}
 
-		trace_iocost_ioc_vrate_adj(ioc, vrate, &missed_ppm, rq_wait_pct,
+		trace_iocost_ioc_vrate_adj(ioc, vrate, missed_ppm, rq_wait_pct,
 					   nr_lagging, nr_shortages,
 					   nr_surpluses);
 
@@ -1603,7 +1603,7 @@ skip_surplus_transfers:
 			ioc->period_us * vrate * INUSE_MARGIN_PCT, 100);
 	} else if (ioc->busy_level != prev_busy_level || nr_lagging) {
 		trace_iocost_ioc_vrate_adj(ioc, atomic64_read(&ioc->vtime_rate),
-					   &missed_ppm, rq_wait_pct, nr_lagging,
+					   missed_ppm, rq_wait_pct, nr_lagging,
 					   nr_shortages, nr_surpluses);
 	}
 
diff --git a/include/trace/events/iocost.h b/include/trace/events/iocost.h
index 7ecaa65b7106e..c2f580fd371b1 100644
--- a/include/trace/events/iocost.h
+++ b/include/trace/events/iocost.h
@@ -130,7 +130,7 @@ DEFINE_EVENT(iocg_inuse_update, iocost_inuse_reset,
 
 TRACE_EVENT(iocost_ioc_vrate_adj,
 
-	TP_PROTO(struct ioc *ioc, u64 new_vrate, u32 (*missed_ppm)[2],
+	TP_PROTO(struct ioc *ioc, u64 new_vrate, u32 *missed_ppm,
 		u32 rq_wait_pct, int nr_lagging, int nr_shortages,
 		int nr_surpluses),
 
@@ -155,8 +155,8 @@ TRACE_EVENT(iocost_ioc_vrate_adj,
 		__entry->old_vrate = atomic64_read(&ioc->vtime_rate);;
 		__entry->new_vrate = new_vrate;
 		__entry->busy_level = ioc->busy_level;
-		__entry->read_missed_ppm = (*missed_ppm)[READ];
-		__entry->write_missed_ppm = (*missed_ppm)[WRITE];
+		__entry->read_missed_ppm = missed_ppm[READ];
+		__entry->write_missed_ppm = missed_ppm[WRITE];
 		__entry->rq_wait_pct = rq_wait_pct;
 		__entry->nr_lagging = nr_lagging;
 		__entry->nr_shortages = nr_shortages;
-- 
2.20.1

[PATCH AUTOSEL 5.6 59/79] s390/ftrace: fix potential crashes when switching tracers

[Sasha Levin]

From: Philipp Rudo <prudo@linux.ibm.com>

[ Upstream commit 8ebf6da9db1b2a20bb86cc1bee2552e894d03308 ]

Switching tracers include instruction patching. To prevent that a
instruction is patched while it's read the instruction patching is done
in stop_machine 'context'. This also means that any function called
during stop_machine must not be traced. Thus add 'notrace' to all
functions called within stop_machine.

Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine")
Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield")
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/diag.c  | 2 +-
 arch/s390/kernel/smp.c   | 4 ++--
 arch/s390/kernel/trace.c | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/s390/kernel/diag.c b/arch/s390/kernel/diag.c
index 61f2b0412345a..ccba63aaeb470 100644
--- a/arch/s390/kernel/diag.c
+++ b/arch/s390/kernel/diag.c
@@ -133,7 +133,7 @@ void diag_stat_inc(enum diag_stat_enum nr)
 }
 EXPORT_SYMBOL(diag_stat_inc);
 
-void diag_stat_inc_norecursion(enum diag_stat_enum nr)
+void notrace diag_stat_inc_norecursion(enum diag_stat_enum nr)
 {
 	this_cpu_inc(diag_stat.counter[nr]);
 	trace_s390_diagnose_norecursion(diag_map[nr].code);
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index f87d4e14269c9..4f8cb8d1c51b9 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -403,7 +403,7 @@ int smp_find_processor_id(u16 address)
 	return -1;
 }
 
-bool arch_vcpu_is_preempted(int cpu)
+bool notrace arch_vcpu_is_preempted(int cpu)
 {
 	if (test_cpu_flag_of(CIF_ENABLED_WAIT, cpu))
 		return false;
@@ -413,7 +413,7 @@ bool arch_vcpu_is_preempted(int cpu)
 }
 EXPORT_SYMBOL(arch_vcpu_is_preempted);
 
-void smp_yield_cpu(int cpu)
+void notrace smp_yield_cpu(int cpu)
 {
 	if (!MACHINE_HAS_DIAG9C)
 		return;
diff --git a/arch/s390/kernel/trace.c b/arch/s390/kernel/trace.c
index 490b52e850145..11a669f3cc93c 100644
--- a/arch/s390/kernel/trace.c
+++ b/arch/s390/kernel/trace.c
@@ -14,7 +14,7 @@ EXPORT_TRACEPOINT_SYMBOL(s390_diagnose);
 
 static DEFINE_PER_CPU(unsigned int, diagnose_trace_depth);
 
-void trace_s390_diagnose_norecursion(int diag_nr)
+void notrace trace_s390_diagnose_norecursion(int diag_nr)
 {
 	unsigned long flags;
 	unsigned int *depth;
-- 
2.20.1

[PATCH AUTOSEL 5.6 60/79] scripts/config: allow colons in option strings for sed

[Sasha Levin]

From: "Jeremie Francois (on alpha)" <jeremie.francois@gmail.com>

[ Upstream commit e461bc9f9ab105637b86065d24b0b83f182d477c ]

Sed broke on some strings as it used colon as a separator.
I made it more robust by using \001, which is legit POSIX AFAIK.

E.g. ./config --set-str CONFIG_USBNET_DEVADDR "de:ad:be:ef:00:01"
failed with: sed: -e expression #1, char 55: unknown option to `s'

Signed-off-by: Jeremie Francois (on alpha) <jeremie.francois@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/config | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/scripts/config b/scripts/config
index e0e39826dae90..eee5b7f3a092a 100755
--- a/scripts/config
+++ b/scripts/config
@@ -7,6 +7,9 @@ myname=${0##*/}
 # If no prefix forced, use the default CONFIG_
 CONFIG_="${CONFIG_-CONFIG_}"
 
+# We use an uncommon delimiter for sed substitutions
+SED_DELIM=$(echo -en "\001")
+
 usage() {
 	cat >&2 <<EOL
 Manipulate options in a .config file from the command line.
@@ -83,7 +86,7 @@ txt_subst() {
 	local infile="$3"
 	local tmpfile="$infile.swp"
 
-	sed -e "s:$before:$after:" "$infile" >"$tmpfile"
+	sed -e "s$SED_DELIM$before$SED_DELIM$after$SED_DELIM" "$infile" >"$tmpfile"
 	# replace original file with the edited one
 	mv "$tmpfile" "$infile"
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 61/79] sched/core: Fix reset-on-fork from RT with uclamp

[Sasha Levin]

From: Quentin Perret <qperret@google.com>

[ Upstream commit eaf5a92ebde5bca3bb2565616115bd6d579486cd ]

uclamp_fork() resets the uclamp values to their default when the
reset-on-fork flag is set. It also checks whether the task has a RT
policy, and sets its uclamp.min to 1024 accordingly. However, during
reset-on-fork, the task's policy is lowered to SCHED_NORMAL right after,
hence leading to an erroneous uclamp.min setting for the new task if it
was forked from RT.

Fix this by removing the unnecessary check on rt_task() in
uclamp_fork() as this doesn't make sense if the reset-on-fork flag is
set.

Fixes: 1a00d999971c ("sched/uclamp: Set default clamps for RT tasks")
Reported-by: Chitti Babu Theegala <ctheegal@codeaurora.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Patrick Bellasi <patrick.bellasi@matbug.net>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lkml.kernel.org/r/20200416085956.217587-1-qperret@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/core.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index da8a194702185..3dd6756973013 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -1239,13 +1239,8 @@ static void uclamp_fork(struct task_struct *p)
 		return;
 
 	for_each_clamp_id(clamp_id) {
-		unsigned int clamp_value = uclamp_none(clamp_id);
-
-		/* By default, RT tasks always get 100% boost */
-		if (unlikely(rt_task(p) && clamp_id == UCLAMP_MIN))
-			clamp_value = uclamp_none(UCLAMP_MAX);
-
-		uclamp_se_set(&p->uclamp_req[clamp_id], clamp_value, false);
+		uclamp_se_set(&p->uclamp_req[clamp_id],
+			      uclamp_none(clamp_id), false);
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 62/79] perf/core: fix parent pid/tid in task exit events

[Sasha Levin]

From: Ian Rogers <irogers@google.com>

[ Upstream commit f3bed55e850926614b9898fe982f66d2541a36a5 ]

Current logic yields the child task as the parent.

Before:
$ perf record bash -c "perf list > /dev/null"
$ perf script -D |grep 'FORK\|EXIT'
4387036190981094 0x5a70 [0x30]: PERF_RECORD_FORK(10472:10472):(10470:10470)
4387036606207580 0xf050 [0x30]: PERF_RECORD_EXIT(10472:10472):(10472:10472)
4387036607103839 0x17150 [0x30]: PERF_RECORD_EXIT(10470:10470):(10470:10470)
                                                   ^
  Note the repeated values here -------------------/

After:
383281514043 0x9d8 [0x30]: PERF_RECORD_FORK(2268:2268):(2266:2266)
383442003996 0x2180 [0x30]: PERF_RECORD_EXIT(2268:2268):(2266:2266)
383451297778 0xb70 [0x30]: PERF_RECORD_EXIT(2266:2266):(2265:2265)

Fixes: 94d5d1b2d891 ("perf_counter: Report the cloning task as parent on perf_counter_fork()")
Reported-by: KP Singh <kpsingh@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200417182842.12522-1-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/core.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/kernel/events/core.c b/kernel/events/core.c
index 533c193481899..29ace472f9168 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -7278,10 +7278,17 @@ static void perf_event_task_output(struct perf_event *event,
 		goto out;
 
 	task_event->event_id.pid = perf_event_pid(event, task);
-	task_event->event_id.ppid = perf_event_pid(event, current);
-
 	task_event->event_id.tid = perf_event_tid(event, task);
-	task_event->event_id.ptid = perf_event_tid(event, current);
+
+	if (task_event->event_id.header.type == PERF_RECORD_EXIT) {
+		task_event->event_id.ppid = perf_event_pid(event,
+							task->real_parent);
+		task_event->event_id.ptid = perf_event_pid(event,
+							task->real_parent);
+	} else {  /* PERF_RECORD_FORK */
+		task_event->event_id.ppid = perf_event_pid(event, current);
+		task_event->event_id.ptid = perf_event_tid(event, current);
+	}
 
 	task_event->event_id.time = perf_event_clock(event);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 63/79] cifs: do not share tcons with DFS

[Sasha Levin]

From: Paulo Alcantara <pc@cjr.nz>

[ Upstream commit 65303de829dd6d291a4947c1a31de31896f8a060 ]

This disables tcon re-use for DFS shares.

tcon->dfs_path stores the path that the tcon should connect to when
doing failing over.

If that tcon is used multiple times e.g. 2 mounts using it with
different prefixpath, each will need a different dfs_path but there is
only one tcon. The other solution would be to split the tcon in 2
tcons during failover but that is much harder.

tcons could not be shared with DFS in cifs.ko because in a
DFS namespace like:

          //domain/dfsroot -> /serverA/dfsroot, /serverB/dfsroot

          //serverA/dfsroot/link -> /serverA/target1/aa/bb

          //serverA/dfsroot/link2 -> /serverA/target1/cc/dd

you can see that link and link2 are two DFS links that both resolve to
the same target share (/serverA/target1), so cifs.ko will only contain a
single tcon for both link and link2.

The problem with that is, if we (auto)mount "link" and "link2", cifs.ko
will only contain a single tcon for both DFS links so we couldn't
perform failover or refresh the DFS cache for both links because
tcon->dfs_path was set to either "link" or "link2", but not both --
which is wrong.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/connect.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index d4a23b48e24d8..9c614d6916c2d 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3419,6 +3419,10 @@ cifs_find_tcon(struct cifs_ses *ses, struct smb_vol *volume_info)
 	spin_lock(&cifs_tcp_ses_lock);
 	list_for_each(tmp, &ses->tcon_list) {
 		tcon = list_entry(tmp, struct cifs_tcon, tcon_list);
+#ifdef CONFIG_CIFS_DFS_UPCALL
+		if (tcon->dfs_path)
+			continue;
+#endif
 		if (!match_tcon(tcon, volume_info))
 			continue;
 		++tcon->tc_count;
-- 
2.20.1

[PATCH AUTOSEL 5.6 64/79] tracing: Fix memory leaks in trace_events_hist.c

[Sasha Levin]

From: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>

[ Upstream commit 9da73974eb9c965dd9989befb593b8c8da9e4bdc ]

kmemleak report 1:
    [<9092c50b>] kmem_cache_alloc_trace+0x138/0x270
    [<05a2c9ed>] create_field_var+0xcf/0x180
    [<528a2d68>] action_create+0xe2/0xc80
    [<63f50b61>] event_hist_trigger_func+0x15b5/0x1920
    [<28ea5d3d>] trigger_process_regex+0x7b/0xc0
    [<3138e86f>] event_trigger_write+0x4d/0xb0
    [<ffd66c19>] __vfs_write+0x30/0x200
    [<4f424a0d>] vfs_write+0x96/0x1b0
    [<da59a290>] ksys_write+0x53/0xc0
    [<3717101a>] __ia32_sys_write+0x15/0x20
    [<c5f23497>] do_fast_syscall_32+0x70/0x250
    [<46e2629c>] entry_SYSENTER_32+0xaf/0x102

This is because save_vars[] of struct hist_trigger_data are
not destroyed

kmemleak report 2:
    [<9092c50b>] kmem_cache_alloc_trace+0x138/0x270
    [<6e5e97c5>] create_var+0x3c/0x110
    [<de82f1b9>] create_field_var+0xaf/0x180
    [<528a2d68>] action_create+0xe2/0xc80
    [<63f50b61>] event_hist_trigger_func+0x15b5/0x1920
    [<28ea5d3d>] trigger_process_regex+0x7b/0xc0
    [<3138e86f>] event_trigger_write+0x4d/0xb0
    [<ffd66c19>] __vfs_write+0x30/0x200
    [<4f424a0d>] vfs_write+0x96/0x1b0
    [<da59a290>] ksys_write+0x53/0xc0
    [<3717101a>] __ia32_sys_write+0x15/0x20
    [<c5f23497>] do_fast_syscall_32+0x70/0x250
    [<46e2629c>] entry_SYSENTER_32+0xaf/0x102

struct hist_field allocated through create_var() do not initialize
"ref" field to 1. The code in __destroy_hist_field() does not destroy
object if "ref" is initialized to zero, the condition
if (--hist_field->ref > 1) always passes since unsigned int wraps.

kmemleak report 3:
    [<f8666fcc>] __kmalloc_track_caller+0x139/0x2b0
    [<bb7f80a5>] kstrdup+0x27/0x50
    [<39d70006>] init_var_ref+0x58/0xd0
    [<8ca76370>] create_var_ref+0x89/0xe0
    [<f045fc39>] action_create+0x38f/0xc80
    [<7c146821>] event_hist_trigger_func+0x15b5/0x1920
    [<07de3f61>] trigger_process_regex+0x7b/0xc0
    [<e87daf8f>] event_trigger_write+0x4d/0xb0
    [<19bf1512>] __vfs_write+0x30/0x200
    [<64ce4d27>] vfs_write+0x96/0x1b0
    [<a6f34170>] ksys_write+0x53/0xc0
    [<7d4230cd>] __ia32_sys_write+0x15/0x20
    [<8eadca00>] do_fast_syscall_32+0x70/0x250
    [<235cf985>] entry_SYSENTER_32+0xaf/0x102

hist_fields (system & event_name) are not freed

Link: http://lkml.kernel.org/r/20200422061503.GA5151@cosmos

Signed-off-by: Vamshi K Sthambamkadi <vamshi.k.sthambamkadi@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/trace_events_hist.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c
index 5f6834a2bf411..fcab11cc6833b 100644
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -3320,6 +3320,9 @@ static void __destroy_hist_field(struct hist_field *hist_field)
 	kfree(hist_field->name);
 	kfree(hist_field->type);
 
+	kfree(hist_field->system);
+	kfree(hist_field->event_name);
+
 	kfree(hist_field);
 }
 
@@ -4382,6 +4385,7 @@ static struct hist_field *create_var(struct hist_trigger_data *hist_data,
 		goto out;
 	}
 
+	var->ref = 1;
 	var->flags = HIST_FIELD_FL_VAR;
 	var->var.idx = idx;
 	var->var.hist_data = var->hist_data = hist_data;
@@ -5011,6 +5015,9 @@ static void destroy_field_vars(struct hist_trigger_data *hist_data)
 
 	for (i = 0; i < hist_data->n_field_vars; i++)
 		destroy_field_var(hist_data->field_vars[i]);
+
+	for (i = 0; i < hist_data->n_save_vars; i++)
+		destroy_field_var(hist_data->save_vars[i]);
 }
 
 static void save_field_var(struct hist_trigger_data *hist_data,
-- 
2.20.1

[PATCH AUTOSEL 5.6 65/79] um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/

[Sasha Levin]

From: Vitor Massaru Iha <vitor@massaru.org>

[ Upstream commit 63ec90f18204f2fe072df108de8a021b28b1b173 ]

In this workflow:

$ make ARCH=um defconfig && make ARCH=um -j8
  [snip]
$ make ARCH=um mrproper
  [snip]
$ make ARCH=um defconfig O=./build_um && make ARCH=um -j8 O=./build_um
  [snip]
  CC      scripts/mod/empty.o
In file included from ../include/linux/types.h:6,
                 from ../include/linux/mod_devicetable.h:12,
                 from ../scripts/mod/devicetable-offsets.c:3:
../include/uapi/linux/types.h:5:10: fatal error: asm/types.h: No such file or directory
    5 | #include <asm/types.h>
      |          ^~~~~~~~~~~~~
compilation terminated.
make[2]: *** [../scripts/Makefile.build:100: scripts/mod/devicetable-offsets.s] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/home/iha/sdb/opensource/lkmp/linux-kselftest.git/Makefile:1140: prepare0] Error 2
make[1]: Leaving directory '/home/iha/sdb/opensource/lkmp/linux-kselftest.git/build_um'
make: *** [Makefile:180: sub-make] Error 2

The cause of the error was because arch/$(SUBARCH)/include/generated files
weren't properly cleaned by `make ARCH=um mrproper`.

Fixes: a788b2ed81ab ("kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build")
Reported-by: Theodore Ts'o <tytso@mit.edu>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://groups.google.com/forum/#!msg/kunit-dev/QmA27YEgEgI/hvS1kiz2CwAJ
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/um/Makefile | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/um/Makefile b/arch/um/Makefile
index d2daa206872da..275f5ffdf6f0a 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -140,6 +140,7 @@ export CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) $(LD_FLAGS_CMDLINE)
 # When cleaning we don't include .config, so we don't include
 # TT or skas makefiles and don't clean skas_ptregs.h.
 CLEAN_FILES += linux x.i gmon.out
+MRPROPER_DIRS += arch/$(SUBARCH)/include/generated
 
 archclean:
 	@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \
-- 
2.20.1

[PATCH AUTOSEL 5.6 66/79] ftrace: Fix memory leak caused by not freeing entry in unregister_ftrace_direct()

[Sasha Levin]

From: "Steven Rostedt (VMware)" <rostedt@goodmis.org>

[ Upstream commit 353da87921a5ec654e7e9024e083f099f1b33c97 ]

kmemleak reported the following:

unreferenced object 0xffff90d47127a920 (size 32):
  comm "modprobe", pid 1766, jiffies 4294792031 (age 162.568s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 22 01 00 00 00 00 ad de  ........".......
    00 78 12 a7 ff ff ff ff 00 00 b6 c0 ff ff ff ff  .x..............
  backtrace:
    [<00000000bb79e72e>] register_ftrace_direct+0xcb/0x3a0
    [<00000000295e4f79>] do_one_initcall+0x72/0x340
    [<00000000873ead18>] do_init_module+0x5a/0x220
    [<00000000974d9de5>] load_module+0x2235/0x2550
    [<0000000059c3d6ce>] __do_sys_finit_module+0xc0/0x120
    [<000000005a8611b4>] do_syscall_64+0x60/0x230
    [<00000000a0cdc49e>] entry_SYSCALL_64_after_hwframe+0x49/0xb3

The entry used to save the direct descriptor needs to be freed
when unregistering.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/trace/ftrace.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index fd81c7de77a70..63089c70adbb6 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -5155,6 +5155,7 @@ int unregister_ftrace_direct(unsigned long ip, unsigned long addr)
 			list_del_rcu(&direct->next);
 			synchronize_rcu_tasks();
 			kfree(direct);
+			kfree(entry);
 			ftrace_direct_func_count--;
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.6 67/79] net: phy: bcm84881: clear settings on link down

[Sasha Levin]

From: Russell King <rmk+kernel@armlinux.org.uk>

[ Upstream commit 796a8fa28980050bf1995617f0876484f3dc1026 ]

Clear the link partner advertisement, speed, duplex and pause when
the link goes down, as other phylib drivers do.  This avoids the
stale link partner, speed and duplex settings being reported via
ethtool.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/bcm84881.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/bcm84881.c b/drivers/net/phy/bcm84881.c
index 14d55a77eb28a..1260115829283 100644
--- a/drivers/net/phy/bcm84881.c
+++ b/drivers/net/phy/bcm84881.c
@@ -174,9 +174,6 @@ static int bcm84881_read_status(struct phy_device *phydev)
 	if (phydev->autoneg == AUTONEG_ENABLE && !phydev->autoneg_complete)
 		phydev->link = false;
 
-	if (!phydev->link)
-		return 0;
-
 	linkmode_zero(phydev->lp_advertising);
 	phydev->speed = SPEED_UNKNOWN;
 	phydev->duplex = DUPLEX_UNKNOWN;
@@ -184,6 +181,9 @@ static int bcm84881_read_status(struct phy_device *phydev)
 	phydev->asym_pause = 0;
 	phydev->mdix = 0;
 
+	if (!phydev->link)
+		return 0;
+
 	if (phydev->autoneg_complete) {
 		val = genphy_c45_read_lpa(phydev);
 		if (val < 0)
-- 
2.20.1

[PATCH AUTOSEL 5.6 68/79] lib/mpi: Fix building for powerpc with clang

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 5990cdee689c6885b27c6d969a3d58b09002b0bc ]

0day reports over and over on an powerpc randconfig with clang:

lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a
inline asm context requiring an l-value: remove the cast or build with
-fheinous-gnu-extensions

Remove the superfluous casts, which have been done previously for x86
and arm32 in commit dea632cadd12 ("lib/mpi: fix build with clang") and
commit 7b7c1df2883d ("lib/mpi/longlong.h: fix building with 32-bit
x86").

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/991
Link: https://lore.kernel.org/r/20200413195041.24064-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 lib/mpi/longlong.h | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/lib/mpi/longlong.h b/lib/mpi/longlong.h
index 2dceaca27489c..891e1c3549c46 100644
--- a/lib/mpi/longlong.h
+++ b/lib/mpi/longlong.h
@@ -722,22 +722,22 @@ do {									\
 do { \
 	if (__builtin_constant_p(bh) && (bh) == 0) \
 		__asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "%r" ((USItype)(ah)), \
 		"%r" ((USItype)(al)), \
 		"rI" ((USItype)(bl))); \
 	else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \
 		__asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "%r" ((USItype)(ah)), \
 		"%r" ((USItype)(al)), \
 		"rI" ((USItype)(bl))); \
 	else \
 		__asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "%r" ((USItype)(ah)), \
 		"r" ((USItype)(bh)), \
 		"%r" ((USItype)(al)), \
@@ -747,36 +747,36 @@ do { \
 do { \
 	if (__builtin_constant_p(ah) && (ah) == 0) \
 		__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "r" ((USItype)(bh)), \
 		"rI" ((USItype)(al)), \
 		"r" ((USItype)(bl))); \
 	else if (__builtin_constant_p(ah) && (ah) == ~(USItype) 0) \
 		__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "r" ((USItype)(bh)), \
 		"rI" ((USItype)(al)), \
 		"r" ((USItype)(bl))); \
 	else if (__builtin_constant_p(bh) && (bh) == 0) \
 		__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "r" ((USItype)(ah)), \
 		"rI" ((USItype)(al)), \
 		"r" ((USItype)(bl))); \
 	else if (__builtin_constant_p(bh) && (bh) == ~(USItype) 0) \
 		__asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "r" ((USItype)(ah)), \
 		"rI" ((USItype)(al)), \
 		"r" ((USItype)(bl))); \
 	else \
 		__asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \
-		: "=r" ((USItype)(sh)), \
-		"=&r" ((USItype)(sl)) \
+		: "=r" (sh), \
+		"=&r" (sl) \
 		: "r" ((USItype)(ah)), \
 		"r" ((USItype)(bh)), \
 		"rI" ((USItype)(al)), \
@@ -787,7 +787,7 @@ do { \
 do { \
 	USItype __m0 = (m0), __m1 = (m1); \
 	__asm__ ("mulhwu %0,%1,%2" \
-	: "=r" ((USItype) ph) \
+	: "=r" (ph) \
 	: "%r" (__m0), \
 	"r" (__m1)); \
 	(pl) = __m0 * __m1; \
-- 
2.20.1

[PATCH AUTOSEL 5.6 69/79] mac80211: sta_info: Add lockdep condition for RCU list usage

[Sasha Levin]

From: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>

[ Upstream commit 8ca47eb9f9e4e10e7e7fa695731a88941732c38d ]

The function sta_info_get_by_idx() uses RCU list primitive.
It is called with  local->sta_mtx held from mac80211/cfg.c.
Add lockdep expression to avoid any false positive RCU list warnings.

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200409082906.27427-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/sta_info.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index e3572be307d6c..149ed0510778d 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -231,7 +231,8 @@ struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata,
 	struct sta_info *sta;
 	int i = 0;
 
-	list_for_each_entry_rcu(sta, &local->sta_list, list) {
+	list_for_each_entry_rcu(sta, &local->sta_list, list,
+				lockdep_is_held(&local->sta_mtx)) {
 		if (sdata != sta->sdata)
 			continue;
 		if (i < idx) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 70/79] afs: Fix to actually set AFS_SERVER_FL_HAVE_EPOCH

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit 69cf3978f3ada4e54beae4ad44868b5627864884 ]

AFS keeps track of the epoch value from the rxrpc protocol to note (a) when
a fileserver appears to have restarted and (b) when different endpoints of
a fileserver do not appear to be associated with the same fileserver
(ie. all probes back from a fileserver from all of its interfaces should
carry the same epoch).

However, the AFS_SERVER_FL_HAVE_EPOCH flag that indicates that we've
received the server's epoch is never set, though it is used.

Fix this to set the flag when we first receive an epoch value from a probe
sent to the filesystem client from the fileserver.

Fixes: 3bf0fb6f33dd ("afs: Probe multiple fileservers simultaneously")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/cmservice.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/afs/cmservice.c b/fs/afs/cmservice.c
index 6765949b3aab6..380ad5ace7cfd 100644
--- a/fs/afs/cmservice.c
+++ b/fs/afs/cmservice.c
@@ -169,7 +169,7 @@ static int afs_record_cm_probe(struct afs_call *call, struct afs_server *server)
 
 	spin_lock(&server->probe_lock);
 
-	if (!test_bit(AFS_SERVER_FL_HAVE_EPOCH, &server->flags)) {
+	if (!test_and_set_bit(AFS_SERVER_FL_HAVE_EPOCH, &server->flags)) {
 		server->cm_epoch = call->epoch;
 		server->probe.cm_epoch = call->epoch;
 		goto out;
-- 
2.20.1

[PATCH AUTOSEL 5.6 71/79] afs: Make record checking use TASK_UNINTERRUPTIBLE when appropriate

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit c4bfda16d1b40d1c5941c61b5aa336bdd2d9904a ]

When an operation is meant to be done uninterruptibly (such as
FS.StoreData), we should not be allowing volume and server record checking
to be interrupted.

Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/internal.h | 2 +-
 fs/afs/rotate.c   | 6 +++---
 fs/afs/server.c   | 7 ++-----
 fs/afs/volume.c   | 8 +++++---
 4 files changed, 11 insertions(+), 12 deletions(-)

diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index ef732dd4e7ef5..15ae9c7f9c00a 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -1335,7 +1335,7 @@ extern struct afs_volume *afs_create_volume(struct afs_fs_context *);
 extern void afs_activate_volume(struct afs_volume *);
 extern void afs_deactivate_volume(struct afs_volume *);
 extern void afs_put_volume(struct afs_cell *, struct afs_volume *);
-extern int afs_check_volume_status(struct afs_volume *, struct key *);
+extern int afs_check_volume_status(struct afs_volume *, struct afs_fs_cursor *);
 
 /*
  * write.c
diff --git a/fs/afs/rotate.c b/fs/afs/rotate.c
index 172ba569cd602..2a3305e42b145 100644
--- a/fs/afs/rotate.c
+++ b/fs/afs/rotate.c
@@ -192,7 +192,7 @@ bool afs_select_fileserver(struct afs_fs_cursor *fc)
 			write_unlock(&vnode->volume->servers_lock);
 
 			set_bit(AFS_VOLUME_NEEDS_UPDATE, &vnode->volume->flags);
-			error = afs_check_volume_status(vnode->volume, fc->key);
+			error = afs_check_volume_status(vnode->volume, fc);
 			if (error < 0)
 				goto failed_set_error;
 
@@ -281,7 +281,7 @@ bool afs_select_fileserver(struct afs_fs_cursor *fc)
 
 			set_bit(AFS_VOLUME_WAIT, &vnode->volume->flags);
 			set_bit(AFS_VOLUME_NEEDS_UPDATE, &vnode->volume->flags);
-			error = afs_check_volume_status(vnode->volume, fc->key);
+			error = afs_check_volume_status(vnode->volume, fc);
 			if (error < 0)
 				goto failed_set_error;
 
@@ -341,7 +341,7 @@ start:
 	/* See if we need to do an update of the volume record.  Note that the
 	 * volume may have moved or even have been deleted.
 	 */
-	error = afs_check_volume_status(vnode->volume, fc->key);
+	error = afs_check_volume_status(vnode->volume, fc);
 	if (error < 0)
 		goto failed_set_error;
 
diff --git a/fs/afs/server.c b/fs/afs/server.c
index b7f3cb2130cae..11b90ac7ea30f 100644
--- a/fs/afs/server.c
+++ b/fs/afs/server.c
@@ -594,12 +594,9 @@ retry:
 	}
 
 	ret = wait_on_bit(&server->flags, AFS_SERVER_FL_UPDATING,
-			  TASK_INTERRUPTIBLE);
+			  (fc->flags & AFS_FS_CURSOR_INTR) ?
+			  TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
 	if (ret == -ERESTARTSYS) {
-		if (!(fc->flags & AFS_FS_CURSOR_INTR) && server->addresses) {
-			_leave(" = t [intr]");
-			return true;
-		}
 		fc->error = ret;
 		_leave(" = f [intr]");
 		return false;
diff --git a/fs/afs/volume.c b/fs/afs/volume.c
index 92ca5e27573b7..4310336b9bb8c 100644
--- a/fs/afs/volume.c
+++ b/fs/afs/volume.c
@@ -281,7 +281,7 @@ error:
 /*
  * Make sure the volume record is up to date.
  */
-int afs_check_volume_status(struct afs_volume *volume, struct key *key)
+int afs_check_volume_status(struct afs_volume *volume, struct afs_fs_cursor *fc)
 {
 	time64_t now = ktime_get_real_seconds();
 	int ret, retries = 0;
@@ -299,7 +299,7 @@ retry:
 	}
 
 	if (!test_and_set_bit_lock(AFS_VOLUME_UPDATING, &volume->flags)) {
-		ret = afs_update_volume_status(volume, key);
+		ret = afs_update_volume_status(volume, fc->key);
 		clear_bit_unlock(AFS_VOLUME_WAIT, &volume->flags);
 		clear_bit_unlock(AFS_VOLUME_UPDATING, &volume->flags);
 		wake_up_bit(&volume->flags, AFS_VOLUME_WAIT);
@@ -312,7 +312,9 @@ retry:
 		return 0;
 	}
 
-	ret = wait_on_bit(&volume->flags, AFS_VOLUME_WAIT, TASK_INTERRUPTIBLE);
+	ret = wait_on_bit(&volume->flags, AFS_VOLUME_WAIT,
+			  (fc->flags & AFS_FS_CURSOR_INTR) ?
+			  TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
 	if (ret == -ERESTARTSYS) {
 		_leave(" = %d", ret);
 		return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.6 72/79] net: bcmgenet: suppress warnings on failed Rx SKB allocations

[Sasha Levin]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit ecaeceb8a8a145d93c7e136f170238229165348f ]

The driver is designed to drop Rx packets and reclaim the buffers
when an allocation fails, and the network interface needs to safely
handle this packet loss. Therefore, an allocation failure of Rx
SKBs is relatively benign.

However, the output of the warning message occurs with a high
scheduling priority that can cause excessive jitter/latency for
other high priority processing.

This commit suppresses the warning messages to prevent scheduling
problems while retaining the failure count in the statistics of
the network interface.

Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index b7c0c20e13258..5fd1a9dfcfff3 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1625,7 +1625,8 @@ static struct sk_buff *bcmgenet_rx_refill(struct bcmgenet_priv *priv,
 	dma_addr_t mapping;
 
 	/* Allocate a new Rx skb */
-	skb = netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT);
+	skb = __netdev_alloc_skb(priv->dev, priv->rx_buf_len + SKB_ALIGNMENT,
+				 GFP_ATOMIC | __GFP_NOWARN);
 	if (!skb) {
 		priv->mib.alloc_rx_buff_failed++;
 		netif_err(priv, rx_err, priv->dev,
-- 
2.20.1

[PATCH AUTOSEL 5.6 73/79] net: systemport: suppress warnings on failed Rx SKB allocations

[Sasha Levin]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit 3554e54a46125030c534820c297ed7f6c3907e24 ]

The driver is designed to drop Rx packets and reclaim the buffers
when an allocation fails, and the network interface needs to safely
handle this packet loss. Therefore, an allocation failure of Rx
SKBs is relatively benign.

However, the output of the warning message occurs with a high
scheduling priority that can cause excessive jitter/latency for
other high priority processing.

This commit suppresses the warning messages to prevent scheduling
problems while retaining the failure count in the statistics of
the network interface.

Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/bcmsysport.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/broadcom/bcmsysport.c b/drivers/net/ethernet/broadcom/bcmsysport.c
index 15b31cddc054b..2e4b4188659a9 100644
--- a/drivers/net/ethernet/broadcom/bcmsysport.c
+++ b/drivers/net/ethernet/broadcom/bcmsysport.c
@@ -666,7 +666,8 @@ static struct sk_buff *bcm_sysport_rx_refill(struct bcm_sysport_priv *priv,
 	dma_addr_t mapping;
 
 	/* Allocate a new SKB for a new packet */
-	skb = netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH);
+	skb = __netdev_alloc_skb(priv->netdev, RX_BUF_LENGTH,
+				 GFP_ATOMIC | __GFP_NOWARN);
 	if (!skb) {
 		priv->mib.alloc_rx_buff_failed++;
 		netif_err(priv, rx_err, ndev, "SKB alloc failed\n");
-- 
2.20.1

[PATCH AUTOSEL 5.6 74/79] bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension

[Sasha Levin]

From: Luke Nelson <lukenels@cs.washington.edu>

[ Upstream commit 5fa9a98fb10380e48a398998cd36a85e4ef711d6 ]

The current JIT uses the following sequence to zero-extend into the
upper 32 bits of the destination register for BPF_LDX BPF_{B,H,W},
when the destination register is not on the stack:

  EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);

The problem is that C7 /0 encodes a MOV instruction that requires a 4-byte
immediate; the current code emits only 1 byte of the immediate. This
means that the first 3 bytes of the next instruction will be treated as
the rest of the immediate, breaking the stream of instructions.

This patch fixes the problem by instead emitting "xor dst_hi,dst_hi"
to clear the upper 32 bits. This fixes the problem and is more efficient
than using MOV to load a zero immediate.

This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way, and the verifier implements a zero-extension optimization. But the
JIT should avoid emitting incorrect encodings regardless.

Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-1-luke.r.nels@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/net/bpf_jit_comp32.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/net/bpf_jit_comp32.c b/arch/x86/net/bpf_jit_comp32.c
index 4d2a7a7646026..cc9ad3892ea6b 100644
--- a/arch/x86/net/bpf_jit_comp32.c
+++ b/arch/x86/net/bpf_jit_comp32.c
@@ -1854,7 +1854,9 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 					      STACK_VAR(dst_hi));
 					EMIT(0x0, 4);
 				} else {
-					EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);
+					/* xor dst_hi,dst_hi */
+					EMIT2(0x33,
+					      add_2reg(0xC0, dst_hi, dst_hi));
 				}
 				break;
 			case BPF_DW:
-- 
2.20.1

[PATCH AUTOSEL 5.6 75/79] bpf, x86_32: Fix clobbering of dst for BPF_JSET

[Sasha Levin]

From: Luke Nelson <lukenels@cs.washington.edu>

[ Upstream commit 50fe7ebb6475711c15b3397467e6424e20026d94 ]

The current JIT clobbers the destination register for BPF_JSET BPF_X
and BPF_K by using "and" and "or" instructions. This is fine when the
destination register is a temporary loaded from a register stored on
the stack but not otherwise.

This patch fixes the problem (for both BPF_K and BPF_X) by always loading
the destination register into temporaries since BPF_JSET should not
modify the destination register.

This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way.

Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-2-luke.r.nels@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/net/bpf_jit_comp32.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

diff --git a/arch/x86/net/bpf_jit_comp32.c b/arch/x86/net/bpf_jit_comp32.c
index cc9ad3892ea6b..ba7d9ccfc6626 100644
--- a/arch/x86/net/bpf_jit_comp32.c
+++ b/arch/x86/net/bpf_jit_comp32.c
@@ -2015,8 +2015,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 		case BPF_JMP | BPF_JSET | BPF_X:
 		case BPF_JMP32 | BPF_JSET | BPF_X: {
 			bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
-			u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
-			u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+			u8 dreg_lo = IA32_EAX;
+			u8 dreg_hi = IA32_EDX;
 			u8 sreg_lo = sstk ? IA32_ECX : src_lo;
 			u8 sreg_hi = sstk ? IA32_EBX : src_hi;
 
@@ -2028,6 +2028,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 					      add_2reg(0x40, IA32_EBP,
 						       IA32_EDX),
 					      STACK_VAR(dst_hi));
+			} else {
+				/* mov dreg_lo,dst_lo */
+				EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+				if (is_jmp64)
+					/* mov dreg_hi,dst_hi */
+					EMIT2(0x89,
+					      add_2reg(0xC0, dreg_hi, dst_hi));
 			}
 
 			if (sstk) {
@@ -2052,8 +2059,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 		case BPF_JMP | BPF_JSET | BPF_K:
 		case BPF_JMP32 | BPF_JSET | BPF_K: {
 			bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
-			u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
-			u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+			u8 dreg_lo = IA32_EAX;
+			u8 dreg_hi = IA32_EDX;
 			u8 sreg_lo = IA32_ECX;
 			u8 sreg_hi = IA32_EBX;
 			u32 hi;
@@ -2066,6 +2073,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 					      add_2reg(0x40, IA32_EBP,
 						       IA32_EDX),
 					      STACK_VAR(dst_hi));
+			} else {
+				/* mov dreg_lo,dst_lo */
+				EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+				if (is_jmp64)
+					/* mov dreg_hi,dst_hi */
+					EMIT2(0x89,
+					      add_2reg(0xC0, dreg_hi, dst_hi));
 			}
 
 			/* mov ecx,imm32 */
-- 
2.20.1

[PATCH AUTOSEL 5.6 76/79] bpf, x86_32: Fix logic error in BPF_LDX zero-extension

[Sasha Levin]

From: Wang YanQing <udknight@gmail.com>

[ Upstream commit 5ca1ca01fae1e90f8d010eb1d83374f28dc11ee6 ]

When verifier_zext is true, we don't need to emit code
for zero-extension.

Fixes: 836256bf5f37 ("x32: bpf: eliminate zero extension code-gen")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200423050637.GA4029@udknight
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/net/bpf_jit_comp32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/net/bpf_jit_comp32.c b/arch/x86/net/bpf_jit_comp32.c
index ba7d9ccfc6626..66cd150b7e541 100644
--- a/arch/x86/net/bpf_jit_comp32.c
+++ b/arch/x86/net/bpf_jit_comp32.c
@@ -1847,7 +1847,7 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 			case BPF_B:
 			case BPF_H:
 			case BPF_W:
-				if (!bpf_prog->aux->verifier_zext)
+				if (bpf_prog->aux->verifier_zext)
 					break;
 				if (dstk) {
 					EMIT3(0xC7, add_1reg(0x40, IA32_EBP),
-- 
2.20.1

[PATCH AUTOSEL 5.6 77/79] bpf: Propagate expected_attach_type when verifying freplace programs

[Sasha Levin]

From: Toke Høiland-Jørgensen <toke@redhat.com>

[ Upstream commit 03f87c0b45b177ba5f6b4a9bbe9f95e4aba31026 ]

For some program types, the verifier relies on the expected_attach_type of
the program being verified in the verification process. However, for
freplace programs, the attach type was not propagated along with the
verifier ops, so the expected_attach_type would always be zero for freplace
programs.

This in turn caused the verifier to sometimes make the wrong call for
freplace programs. For all existing uses of expected_attach_type for this
purpose, the result of this was only false negatives (i.e., freplace
functions would be rejected by the verifier even though they were valid
programs for the target they were replacing). However, should a false
positive be introduced, this can lead to out-of-bounds accesses and/or
crashes.

The fix introduced in this patch is to propagate the expected_attach_type
to the freplace program during verification, and reset it after that is
done.

Fixes: be8704ff07d2 ("bpf: Introduce dynamic program extensions")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526726.293902.13257293296560360508.stgit@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/bpf/verifier.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 1381913cb10ba..1c53ccbd5b5d6 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -9892,6 +9892,7 @@ static int check_attach_btf_id(struct bpf_verifier_env *env)
 				return -EINVAL;
 			}
 			env->ops = bpf_verifier_ops[tgt_prog->type];
+			prog->expected_attach_type = tgt_prog->expected_attach_type;
 		}
 		if (!tgt_prog->jited) {
 			verbose(env, "Can attach to only JITed progs\n");
@@ -10225,6 +10226,13 @@ err_release_maps:
 		 * them now. Otherwise free_used_maps() will release them.
 		 */
 		release_maps(env);
+
+	/* extension progs temporarily inherit the attach_type of their targets
+	   for verification purposes, so set it back to zero before returning
+	 */
+	if (env->prog->type == BPF_PROG_TYPE_EXT)
+		env->prog->expected_attach_type = 0;
+
 	*prog = env->prog;
 err_unlock:
 	if (!is_priv)
-- 
2.20.1

[PATCH AUTOSEL 5.6 78/79] tools/runqslower: Ensure own vmlinux.h is picked up first

[Sasha Levin]

From: Andrii Nakryiko <andriin@fb.com>

[ Upstream commit dfc55ace9939e1e8703ad37ddbba41aaa31cc0cb ]

Reorder include paths to ensure that runqslower sources are picking up
vmlinux.h, generated by runqslower's own Makefile. When runqslower is built
from selftests/bpf, due to current -I$(BPF_INCLUDE) -I$(OUTPUT) ordering, it
might pick up not-yet-complete vmlinux.h, generated by selftests Makefile,
which could lead to compilation errors like [0]. So ensure that -I$(OUTPUT)
goes first and rely on runqslower's Makefile own dependency chain to ensure
vmlinux.h is properly completed before source code relying on it is compiled.

  [0] https://travis-ci.org/github/libbpf/libbpf/jobs/677905925

Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200422012407.176303-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/bpf/runqslower/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/bpf/runqslower/Makefile b/tools/bpf/runqslower/Makefile
index 39edd68afa8e0..8a6f82e56a249 100644
--- a/tools/bpf/runqslower/Makefile
+++ b/tools/bpf/runqslower/Makefile
@@ -8,7 +8,7 @@ BPFTOOL ?= $(DEFAULT_BPFTOOL)
 LIBBPF_SRC := $(abspath ../../lib/bpf)
 BPFOBJ := $(OUTPUT)/libbpf.a
 BPF_INCLUDE := $(OUTPUT)
-INCLUDES := -I$(BPF_INCLUDE) -I$(OUTPUT) -I$(abspath ../../lib)
+INCLUDES := -I$(OUTPUT) -I$(BPF_INCLUDE) -I$(abspath ../../lib)
 CFLAGS := -g -Wall
 
 # Try to detect best kernel BTF source
-- 
2.20.1

[PATCH AUTOSEL 5.6 79/79] selftests/bpf: Fix a couple of broken test_btf cases

[Sasha Levin]

From: Stanislav Fomichev <sdf@google.com>

[ Upstream commit e1cebd841b0aa1ceda771706d54a0501986a3c88 ]

Commit 51c39bb1d5d1 ("bpf: Introduce function-by-function verification")
introduced function linkage flag and changed the error message from
"vlen != 0" to "Invalid func linkage" and broke some fake BPF programs.

Adjust the test accordingly.

AFACT, the programs don't really need any arguments and only look
at BTF for maps, so let's drop the args altogether.

Before:
BTF raw test[103] (func (Non zero vlen)): do_test_raw:3703:FAIL expected
err_str:vlen != 0
magic: 0xeb9f
version: 1
flags: 0x0
hdr_len: 24
type_off: 0
type_len: 72
str_off: 72
str_len: 10
btf_total_size: 106
[1] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[2] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=(none)
[3] FUNC_PROTO (anon) return=0 args=(1 a, 2 b)
[4] FUNC func type_id=3 Invalid func linkage

BTF libbpf test[1] (test_btf_haskv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_haskv.o'
do_test_file:4201:FAIL bpf_object__load: -4007
BTF libbpf test[2] (test_btf_newkv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_newkv.o'
do_test_file:4201:FAIL bpf_object__load: -4007
BTF libbpf test[3] (test_btf_nokv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_nokv.o'
do_test_file:4201:FAIL bpf_object__load: -4007

Fixes: 51c39bb1d5d1 ("bpf: Introduce function-by-function verification")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200422003753.124921-1-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../selftests/bpf/progs/test_btf_haskv.c       | 18 +++++-------------
 .../selftests/bpf/progs/test_btf_newkv.c       | 18 +++++-------------
 .../selftests/bpf/progs/test_btf_nokv.c        | 18 +++++-------------
 tools/testing/selftests/bpf/test_btf.c         |  2 +-
 4 files changed, 16 insertions(+), 40 deletions(-)

diff --git a/tools/testing/selftests/bpf/progs/test_btf_haskv.c b/tools/testing/selftests/bpf/progs/test_btf_haskv.c
index 88b0566da13d2..31538c9ed1939 100644
--- a/tools/testing/selftests/bpf/progs/test_btf_haskv.c
+++ b/tools/testing/selftests/bpf/progs/test_btf_haskv.c
@@ -20,20 +20,12 @@ struct bpf_map_def SEC("maps") btf_map = {
 
 BPF_ANNOTATE_KV_PAIR(btf_map, int, struct ipv_counts);
 
-struct dummy_tracepoint_args {
-	unsigned long long pad;
-	struct sock *sock;
-};
-
 __attribute__((noinline))
-int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(void)
 {
 	struct ipv_counts *counts;
 	int key = 0;
 
-	if (!arg->sock)
-		return 0;
-
 	counts = bpf_map_lookup_elem(&btf_map, &key);
 	if (!counts)
 		return 0;
@@ -44,15 +36,15 @@ int test_long_fname_2(struct dummy_tracepoint_args *arg)
 }
 
 __attribute__((noinline))
-int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(void)
 {
-	return test_long_fname_2(arg);
+	return test_long_fname_2();
 }
 
 SEC("dummy_tracepoint")
-int _dummy_tracepoint(struct dummy_tracepoint_args *arg)
+int _dummy_tracepoint(void *arg)
 {
-	return test_long_fname_1(arg);
+	return test_long_fname_1();
 }
 
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/test_btf_newkv.c b/tools/testing/selftests/bpf/progs/test_btf_newkv.c
index a924e53c8e9d8..6c5560162746b 100644
--- a/tools/testing/selftests/bpf/progs/test_btf_newkv.c
+++ b/tools/testing/selftests/bpf/progs/test_btf_newkv.c
@@ -28,20 +28,12 @@ struct {
 	__type(value, struct ipv_counts);
 } btf_map SEC(".maps");
 
-struct dummy_tracepoint_args {
-	unsigned long long pad;
-	struct sock *sock;
-};
-
 __attribute__((noinline))
-int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(void)
 {
 	struct ipv_counts *counts;
 	int key = 0;
 
-	if (!arg->sock)
-		return 0;
-
 	counts = bpf_map_lookup_elem(&btf_map, &key);
 	if (!counts)
 		return 0;
@@ -57,15 +49,15 @@ int test_long_fname_2(struct dummy_tracepoint_args *arg)
 }
 
 __attribute__((noinline))
-int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(void)
 {
-	return test_long_fname_2(arg);
+	return test_long_fname_2();
 }
 
 SEC("dummy_tracepoint")
-int _dummy_tracepoint(struct dummy_tracepoint_args *arg)
+int _dummy_tracepoint(void *arg)
 {
-	return test_long_fname_1(arg);
+	return test_long_fname_1();
 }
 
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/progs/test_btf_nokv.c b/tools/testing/selftests/bpf/progs/test_btf_nokv.c
index 983aedd1c0725..506da7fd2da23 100644
--- a/tools/testing/selftests/bpf/progs/test_btf_nokv.c
+++ b/tools/testing/selftests/bpf/progs/test_btf_nokv.c
@@ -17,20 +17,12 @@ struct bpf_map_def SEC("maps") btf_map = {
 	.max_entries = 4,
 };
 
-struct dummy_tracepoint_args {
-	unsigned long long pad;
-	struct sock *sock;
-};
-
 __attribute__((noinline))
-int test_long_fname_2(struct dummy_tracepoint_args *arg)
+int test_long_fname_2(void)
 {
 	struct ipv_counts *counts;
 	int key = 0;
 
-	if (!arg->sock)
-		return 0;
-
 	counts = bpf_map_lookup_elem(&btf_map, &key);
 	if (!counts)
 		return 0;
@@ -41,15 +33,15 @@ int test_long_fname_2(struct dummy_tracepoint_args *arg)
 }
 
 __attribute__((noinline))
-int test_long_fname_1(struct dummy_tracepoint_args *arg)
+int test_long_fname_1(void)
 {
-	return test_long_fname_2(arg);
+	return test_long_fname_2();
 }
 
 SEC("dummy_tracepoint")
-int _dummy_tracepoint(struct dummy_tracepoint_args *arg)
+int _dummy_tracepoint(void *arg)
 {
-	return test_long_fname_1(arg);
+	return test_long_fname_1();
 }
 
 char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c
index 8da77cda5f4a5..305fae8f80a98 100644
--- a/tools/testing/selftests/bpf/test_btf.c
+++ b/tools/testing/selftests/bpf/test_btf.c
@@ -2854,7 +2854,7 @@ static struct btf_raw_test raw_tests[] = {
 	.value_type_id = 1,
 	.max_entries = 4,
 	.btf_load_err = true,
-	.err_str = "vlen != 0",
+	.err_str = "Invalid func linkage",
 },
 
 {
-- 
2.20.1