[PATCH 0/3] Convert mtk-dpi to drm_bridge API

[PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Enric Balletbo i Serra]

The mtk-dpi driver still uses the drm_encoder API which is now somehow
deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
like we did for the mtk-dsi driver [1], this is another small step to be able to
fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.

Best regards,
 Enric

[1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559

Enric Balletbo i Serra (3):
  drm/mediatek: mtk_dpi: Rename bridge to next_bridge
  drm/mediatek: mtk_dpi: Convert to bridge driver
  drm/mediatek: mtk_dpi: Use simple encoder

 drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
 1 file changed, 39 insertions(+), 45 deletions(-)

-- 
2.26.2

[PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Enric Balletbo i Serra]

The mtk-dpi driver still uses the drm_encoder API which is now somehow
deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
like we did for the mtk-dsi driver [1], this is another small step to be able to
fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.

Best regards,
 Enric

[1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559

Enric Balletbo i Serra (3):
  drm/mediatek: mtk_dpi: Rename bridge to next_bridge
  drm/mediatek: mtk_dpi: Convert to bridge driver
  drm/mediatek: mtk_dpi: Use simple encoder

 drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
 1 file changed, 39 insertions(+), 45 deletions(-)

-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Enric Balletbo i Serra]

The mtk-dpi driver still uses the drm_encoder API which is now somehow
deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
like we did for the mtk-dsi driver [1], this is another small step to be able to
fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.

Best regards,
 Enric

[1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559

Enric Balletbo i Serra (3):
  drm/mediatek: mtk_dpi: Rename bridge to next_bridge
  drm/mediatek: mtk_dpi: Convert to bridge driver
  drm/mediatek: mtk_dpi: Use simple encoder

 drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
 1 file changed, 39 insertions(+), 45 deletions(-)

-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Enric Balletbo i Serra]

The mtk-dpi driver still uses the drm_encoder API which is now somehow
deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
like we did for the mtk-dsi driver [1], this is another small step to be able to
fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.

Best regards,
 Enric

[1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559

Enric Balletbo i Serra (3):
  drm/mediatek: mtk_dpi: Rename bridge to next_bridge
  drm/mediatek: mtk_dpi: Convert to bridge driver
  drm/mediatek: mtk_dpi: Use simple encoder

 drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
 1 file changed, 39 insertions(+), 45 deletions(-)

-- 
2.26.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH 1/3] drm/mediatek: mtk_dpi: Rename bridge to next_bridge

[Enric Balletbo i Serra]

This is really a cosmetic change just to make a bit more readable the
code after convert the driver to drm_bridge. The bridge variable name
will be used by the encoder drm_bridge, and the chained bridge will be
named next_bridge.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 7fbfa95bab09..7112125dc3d1 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -61,7 +61,7 @@ enum mtk_dpi_out_color_format {
 struct mtk_dpi {
 	struct mtk_ddp_comp ddp_comp;
 	struct drm_encoder encoder;
-	struct drm_bridge *bridge;
+	struct drm_bridge *next_bridge;
 	void __iomem *regs;
 	struct device *dev;
 	struct clk *engine_clk;
@@ -607,7 +607,7 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 	/* Currently DPI0 is fixed to be driven by OVL1 */
 	dpi->encoder.possible_crtcs = BIT(1);
 
-	ret = drm_bridge_attach(&dpi->encoder, dpi->bridge, NULL, 0);
+	ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
 	if (ret) {
 		dev_err(dev, "Failed to attach bridge: %d\n", ret);
 		goto err_cleanup;
@@ -747,11 +747,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 	}
 
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
-					  NULL, &dpi->bridge);
+					  NULL, &dpi->next_bridge);
 	if (ret)
 		return ret;
 
-	dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
+	dev_info(dev, "Found bridge node: %pOF\n", dpi->next_bridge->of_node);
 
 	comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
 	if (comp_id < 0) {
-- 
2.26.2

[PATCH 1/3] drm/mediatek: mtk_dpi: Rename bridge to next_bridge

[Enric Balletbo i Serra]

This is really a cosmetic change just to make a bit more readable the
code after convert the driver to drm_bridge. The bridge variable name
will be used by the encoder drm_bridge, and the chained bridge will be
named next_bridge.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 7fbfa95bab09..7112125dc3d1 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -61,7 +61,7 @@ enum mtk_dpi_out_color_format {
 struct mtk_dpi {
 	struct mtk_ddp_comp ddp_comp;
 	struct drm_encoder encoder;
-	struct drm_bridge *bridge;
+	struct drm_bridge *next_bridge;
 	void __iomem *regs;
 	struct device *dev;
 	struct clk *engine_clk;
@@ -607,7 +607,7 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 	/* Currently DPI0 is fixed to be driven by OVL1 */
 	dpi->encoder.possible_crtcs = BIT(1);
 
-	ret = drm_bridge_attach(&dpi->encoder, dpi->bridge, NULL, 0);
+	ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
 	if (ret) {
 		dev_err(dev, "Failed to attach bridge: %d\n", ret);
 		goto err_cleanup;
@@ -747,11 +747,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 	}
 
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
-					  NULL, &dpi->bridge);
+					  NULL, &dpi->next_bridge);
 	if (ret)
 		return ret;
 
-	dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
+	dev_info(dev, "Found bridge node: %pOF\n", dpi->next_bridge->of_node);
 
 	comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
 	if (comp_id < 0) {
-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 1/3] drm/mediatek: mtk_dpi: Rename bridge to next_bridge

[Enric Balletbo i Serra]

This is really a cosmetic change just to make a bit more readable the
code after convert the driver to drm_bridge. The bridge variable name
will be used by the encoder drm_bridge, and the chained bridge will be
named next_bridge.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 7fbfa95bab09..7112125dc3d1 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -61,7 +61,7 @@ enum mtk_dpi_out_color_format {
 struct mtk_dpi {
 	struct mtk_ddp_comp ddp_comp;
 	struct drm_encoder encoder;
-	struct drm_bridge *bridge;
+	struct drm_bridge *next_bridge;
 	void __iomem *regs;
 	struct device *dev;
 	struct clk *engine_clk;
@@ -607,7 +607,7 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 	/* Currently DPI0 is fixed to be driven by OVL1 */
 	dpi->encoder.possible_crtcs = BIT(1);
 
-	ret = drm_bridge_attach(&dpi->encoder, dpi->bridge, NULL, 0);
+	ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
 	if (ret) {
 		dev_err(dev, "Failed to attach bridge: %d\n", ret);
 		goto err_cleanup;
@@ -747,11 +747,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 	}
 
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
-					  NULL, &dpi->bridge);
+					  NULL, &dpi->next_bridge);
 	if (ret)
 		return ret;
 
-	dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
+	dev_info(dev, "Found bridge node: %pOF\n", dpi->next_bridge->of_node);
 
 	comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
 	if (comp_id < 0) {
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 1/3] drm/mediatek: mtk_dpi: Rename bridge to next_bridge

[Enric Balletbo i Serra]

This is really a cosmetic change just to make a bit more readable the
code after convert the driver to drm_bridge. The bridge variable name
will be used by the encoder drm_bridge, and the chained bridge will be
named next_bridge.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 7fbfa95bab09..7112125dc3d1 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -61,7 +61,7 @@ enum mtk_dpi_out_color_format {
 struct mtk_dpi {
 	struct mtk_ddp_comp ddp_comp;
 	struct drm_encoder encoder;
-	struct drm_bridge *bridge;
+	struct drm_bridge *next_bridge;
 	void __iomem *regs;
 	struct device *dev;
 	struct clk *engine_clk;
@@ -607,7 +607,7 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 	/* Currently DPI0 is fixed to be driven by OVL1 */
 	dpi->encoder.possible_crtcs = BIT(1);
 
-	ret = drm_bridge_attach(&dpi->encoder, dpi->bridge, NULL, 0);
+	ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
 	if (ret) {
 		dev_err(dev, "Failed to attach bridge: %d\n", ret);
 		goto err_cleanup;
@@ -747,11 +747,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 	}
 
 	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
-					  NULL, &dpi->bridge);
+					  NULL, &dpi->next_bridge);
 	if (ret)
 		return ret;
 
-	dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
+	dev_info(dev, "Found bridge node: %pOF\n", dpi->next_bridge->of_node);
 
 	comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
 	if (comp_id < 0) {
-- 
2.26.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 1/3] drm/mediatek: mtk_dpi: Rename bridge to next_bridge

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> This is really a cosmetic change just to make a bit more readable the
> code after convert the driver to drm_bridge. The bridge variable name
> will be used by the encoder drm_bridge, and the chained bridge will be
> named next_bridge.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 7fbfa95bab09..7112125dc3d1 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -61,7 +61,7 @@ enum mtk_dpi_out_color_format {
>  struct mtk_dpi {
>         struct mtk_ddp_comp ddp_comp;
>         struct drm_encoder encoder;
> -       struct drm_bridge *bridge;
> +       struct drm_bridge *next_bridge;
>         void __iomem *regs;
>         struct device *dev;
>         struct clk *engine_clk;
> @@ -607,7 +607,7 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>         /* Currently DPI0 is fixed to be driven by OVL1 */
>         dpi->encoder.possible_crtcs = BIT(1);
>
> -       ret = drm_bridge_attach(&dpi->encoder, dpi->bridge, NULL, 0);
> +       ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
>         if (ret) {
>                 dev_err(dev, "Failed to attach bridge: %d\n", ret);
>                 goto err_cleanup;
> @@ -747,11 +747,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>         }
>
>         ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> -                                         NULL, &dpi->bridge);
> +                                         NULL, &dpi->next_bridge);
>         if (ret)
>                 return ret;
>
> -       dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
> +       dev_info(dev, "Found bridge node: %pOF\n", dpi->next_bridge->of_node);
>
>         comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
>         if (comp_id < 0) {
> --
> 2.26.2
>

Re: [PATCH 1/3] drm/mediatek: mtk_dpi: Rename bridge to next_bridge

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> This is really a cosmetic change just to make a bit more readable the
> code after convert the driver to drm_bridge. The bridge variable name
> will be used by the encoder drm_bridge, and the chained bridge will be
> named next_bridge.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 7fbfa95bab09..7112125dc3d1 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -61,7 +61,7 @@ enum mtk_dpi_out_color_format {
>  struct mtk_dpi {
>         struct mtk_ddp_comp ddp_comp;
>         struct drm_encoder encoder;
> -       struct drm_bridge *bridge;
> +       struct drm_bridge *next_bridge;
>         void __iomem *regs;
>         struct device *dev;
>         struct clk *engine_clk;
> @@ -607,7 +607,7 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>         /* Currently DPI0 is fixed to be driven by OVL1 */
>         dpi->encoder.possible_crtcs = BIT(1);
>
> -       ret = drm_bridge_attach(&dpi->encoder, dpi->bridge, NULL, 0);
> +       ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
>         if (ret) {
>                 dev_err(dev, "Failed to attach bridge: %d\n", ret);
>                 goto err_cleanup;
> @@ -747,11 +747,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>         }
>
>         ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> -                                         NULL, &dpi->bridge);
> +                                         NULL, &dpi->next_bridge);
>         if (ret)
>                 return ret;
>
> -       dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
> +       dev_info(dev, "Found bridge node: %pOF\n", dpi->next_bridge->of_node);
>
>         comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
>         if (comp_id < 0) {
> --
> 2.26.2
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 1/3] drm/mediatek: mtk_dpi: Rename bridge to next_bridge

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> This is really a cosmetic change just to make a bit more readable the
> code after convert the driver to drm_bridge. The bridge variable name
> will be used by the encoder drm_bridge, and the chained bridge will be
> named next_bridge.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 7fbfa95bab09..7112125dc3d1 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -61,7 +61,7 @@ enum mtk_dpi_out_color_format {
>  struct mtk_dpi {
>         struct mtk_ddp_comp ddp_comp;
>         struct drm_encoder encoder;
> -       struct drm_bridge *bridge;
> +       struct drm_bridge *next_bridge;
>         void __iomem *regs;
>         struct device *dev;
>         struct clk *engine_clk;
> @@ -607,7 +607,7 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>         /* Currently DPI0 is fixed to be driven by OVL1 */
>         dpi->encoder.possible_crtcs = BIT(1);
>
> -       ret = drm_bridge_attach(&dpi->encoder, dpi->bridge, NULL, 0);
> +       ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
>         if (ret) {
>                 dev_err(dev, "Failed to attach bridge: %d\n", ret);
>                 goto err_cleanup;
> @@ -747,11 +747,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>         }
>
>         ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> -                                         NULL, &dpi->bridge);
> +                                         NULL, &dpi->next_bridge);
>         if (ret)
>                 return ret;
>
> -       dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
> +       dev_info(dev, "Found bridge node: %pOF\n", dpi->next_bridge->of_node);
>
>         comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
>         if (comp_id < 0) {
> --
> 2.26.2
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 1/3] drm/mediatek: mtk_dpi: Rename bridge to next_bridge

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> This is really a cosmetic change just to make a bit more readable the
> code after convert the driver to drm_bridge. The bridge variable name
> will be used by the encoder drm_bridge, and the chained bridge will be
> named next_bridge.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 7fbfa95bab09..7112125dc3d1 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -61,7 +61,7 @@ enum mtk_dpi_out_color_format {
>  struct mtk_dpi {
>         struct mtk_ddp_comp ddp_comp;
>         struct drm_encoder encoder;
> -       struct drm_bridge *bridge;
> +       struct drm_bridge *next_bridge;
>         void __iomem *regs;
>         struct device *dev;
>         struct clk *engine_clk;
> @@ -607,7 +607,7 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>         /* Currently DPI0 is fixed to be driven by OVL1 */
>         dpi->encoder.possible_crtcs = BIT(1);
>
> -       ret = drm_bridge_attach(&dpi->encoder, dpi->bridge, NULL, 0);
> +       ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
>         if (ret) {
>                 dev_err(dev, "Failed to attach bridge: %d\n", ret);
>                 goto err_cleanup;
> @@ -747,11 +747,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>         }
>
>         ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> -                                         NULL, &dpi->bridge);
> +                                         NULL, &dpi->next_bridge);
>         if (ret)
>                 return ret;
>
> -       dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
> +       dev_info(dev, "Found bridge node: %pOF\n", dpi->next_bridge->of_node);
>
>         comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
>         if (comp_id < 0) {
> --
> 2.26.2
>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH 2/3] drm/mediatek: mtk_dpi: Convert to bridge driver

[Enric Balletbo i Serra]

Convert mtk_dpi to a bridge driver with built-in encoder support for
compatibility with existing component drivers.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 66 +++++++++++++++---------------
 1 file changed, 34 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 7112125dc3d1..baad198c69eb 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -61,6 +61,7 @@ enum mtk_dpi_out_color_format {
 struct mtk_dpi {
 	struct mtk_ddp_comp ddp_comp;
 	struct drm_encoder encoder;
+	struct drm_bridge bridge;
 	struct drm_bridge *next_bridge;
 	void __iomem *regs;
 	struct device *dev;
@@ -77,9 +78,9 @@ struct mtk_dpi {
 	int refcount;
 };
 
-static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e)
+static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
 {
-	return container_of(e, struct mtk_dpi, encoder);
+	return container_of(b, struct mtk_dpi, bridge);
 }
 
 enum mtk_dpi_polarity {
@@ -518,50 +519,44 @@ static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
 	.destroy = mtk_dpi_encoder_destroy,
 };
 
-static bool mtk_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
-				       const struct drm_display_mode *mode,
-				       struct drm_display_mode *adjusted_mode)
+static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
+				 enum drm_bridge_attach_flags flags)
 {
-	return true;
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
+
+	return drm_bridge_attach(bridge->encoder, dpi->next_bridge,
+				 &dpi->bridge, flags);
 }
 
-static void mtk_dpi_encoder_mode_set(struct drm_encoder *encoder,
-				     struct drm_display_mode *mode,
-				     struct drm_display_mode *adjusted_mode)
+static void mtk_dpi_bridge_mode_set(struct drm_bridge *bridge,
+				const struct drm_display_mode *mode,
+				const struct drm_display_mode *adjusted_mode)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	drm_mode_copy(&dpi->mode, adjusted_mode);
 }
 
-static void mtk_dpi_encoder_disable(struct drm_encoder *encoder)
+static void mtk_dpi_bridge_disable(struct drm_bridge *bridge)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	mtk_dpi_power_off(dpi);
 }
 
-static void mtk_dpi_encoder_enable(struct drm_encoder *encoder)
+static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	mtk_dpi_power_on(dpi);
 	mtk_dpi_set_display_mode(dpi, &dpi->mode);
 }
 
-static int mtk_dpi_atomic_check(struct drm_encoder *encoder,
-				struct drm_crtc_state *crtc_state,
-				struct drm_connector_state *conn_state)
-{
-	return 0;
-}
-
-static const struct drm_encoder_helper_funcs mtk_dpi_encoder_helper_funcs = {
-	.mode_fixup = mtk_dpi_encoder_mode_fixup,
-	.mode_set = mtk_dpi_encoder_mode_set,
-	.disable = mtk_dpi_encoder_disable,
-	.enable = mtk_dpi_encoder_enable,
-	.atomic_check = mtk_dpi_atomic_check,
+static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
+	.attach = mtk_dpi_bridge_attach,
+	.mode_set = mtk_dpi_bridge_mode_set,
+	.disable = mtk_dpi_bridge_disable,
+	.enable = mtk_dpi_bridge_enable,
 };
 
 static void mtk_dpi_start(struct mtk_ddp_comp *comp)
@@ -602,16 +597,13 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 		dev_err(dev, "Failed to initialize decoder: %d\n", ret);
 		goto err_unregister;
 	}
-	drm_encoder_helper_add(&dpi->encoder, &mtk_dpi_encoder_helper_funcs);
 
 	/* Currently DPI0 is fixed to be driven by OVL1 */
 	dpi->encoder.possible_crtcs = BIT(1);
 
-	ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
-	if (ret) {
-		dev_err(dev, "Failed to attach bridge: %d\n", ret);
+	ret = drm_bridge_attach(&dpi->encoder, &dpi->bridge, NULL, 0);
+	if (ret)
 		goto err_cleanup;
-	}
 
 	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
 	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
@@ -768,8 +760,15 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dpi);
 
+	dpi->bridge.funcs = &mtk_dpi_bridge_funcs;
+	dpi->bridge.of_node = dev->of_node;
+	dpi->bridge.type = DRM_MODE_CONNECTOR_DPI;
+
+	drm_bridge_add(&dpi->bridge);
+
 	ret = component_add(dev, &mtk_dpi_component_ops);
 	if (ret) {
+		drm_bridge_remove(&dpi->bridge);
 		dev_err(dev, "Failed to add component: %d\n", ret);
 		return ret;
 	}
@@ -779,7 +778,10 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 
 static int mtk_dpi_remove(struct platform_device *pdev)
 {
+	struct mtk_dpi *dpi = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &mtk_dpi_component_ops);
+	drm_bridge_remove(&dpi->bridge);
 
 	return 0;
 }
-- 
2.26.2

[PATCH 2/3] drm/mediatek: mtk_dpi: Convert to bridge driver

[Enric Balletbo i Serra]

Convert mtk_dpi to a bridge driver with built-in encoder support for
compatibility with existing component drivers.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 66 +++++++++++++++---------------
 1 file changed, 34 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 7112125dc3d1..baad198c69eb 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -61,6 +61,7 @@ enum mtk_dpi_out_color_format {
 struct mtk_dpi {
 	struct mtk_ddp_comp ddp_comp;
 	struct drm_encoder encoder;
+	struct drm_bridge bridge;
 	struct drm_bridge *next_bridge;
 	void __iomem *regs;
 	struct device *dev;
@@ -77,9 +78,9 @@ struct mtk_dpi {
 	int refcount;
 };
 
-static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e)
+static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
 {
-	return container_of(e, struct mtk_dpi, encoder);
+	return container_of(b, struct mtk_dpi, bridge);
 }
 
 enum mtk_dpi_polarity {
@@ -518,50 +519,44 @@ static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
 	.destroy = mtk_dpi_encoder_destroy,
 };
 
-static bool mtk_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
-				       const struct drm_display_mode *mode,
-				       struct drm_display_mode *adjusted_mode)
+static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
+				 enum drm_bridge_attach_flags flags)
 {
-	return true;
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
+
+	return drm_bridge_attach(bridge->encoder, dpi->next_bridge,
+				 &dpi->bridge, flags);
 }
 
-static void mtk_dpi_encoder_mode_set(struct drm_encoder *encoder,
-				     struct drm_display_mode *mode,
-				     struct drm_display_mode *adjusted_mode)
+static void mtk_dpi_bridge_mode_set(struct drm_bridge *bridge,
+				const struct drm_display_mode *mode,
+				const struct drm_display_mode *adjusted_mode)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	drm_mode_copy(&dpi->mode, adjusted_mode);
 }
 
-static void mtk_dpi_encoder_disable(struct drm_encoder *encoder)
+static void mtk_dpi_bridge_disable(struct drm_bridge *bridge)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	mtk_dpi_power_off(dpi);
 }
 
-static void mtk_dpi_encoder_enable(struct drm_encoder *encoder)
+static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	mtk_dpi_power_on(dpi);
 	mtk_dpi_set_display_mode(dpi, &dpi->mode);
 }
 
-static int mtk_dpi_atomic_check(struct drm_encoder *encoder,
-				struct drm_crtc_state *crtc_state,
-				struct drm_connector_state *conn_state)
-{
-	return 0;
-}
-
-static const struct drm_encoder_helper_funcs mtk_dpi_encoder_helper_funcs = {
-	.mode_fixup = mtk_dpi_encoder_mode_fixup,
-	.mode_set = mtk_dpi_encoder_mode_set,
-	.disable = mtk_dpi_encoder_disable,
-	.enable = mtk_dpi_encoder_enable,
-	.atomic_check = mtk_dpi_atomic_check,
+static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
+	.attach = mtk_dpi_bridge_attach,
+	.mode_set = mtk_dpi_bridge_mode_set,
+	.disable = mtk_dpi_bridge_disable,
+	.enable = mtk_dpi_bridge_enable,
 };
 
 static void mtk_dpi_start(struct mtk_ddp_comp *comp)
@@ -602,16 +597,13 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 		dev_err(dev, "Failed to initialize decoder: %d\n", ret);
 		goto err_unregister;
 	}
-	drm_encoder_helper_add(&dpi->encoder, &mtk_dpi_encoder_helper_funcs);
 
 	/* Currently DPI0 is fixed to be driven by OVL1 */
 	dpi->encoder.possible_crtcs = BIT(1);
 
-	ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
-	if (ret) {
-		dev_err(dev, "Failed to attach bridge: %d\n", ret);
+	ret = drm_bridge_attach(&dpi->encoder, &dpi->bridge, NULL, 0);
+	if (ret)
 		goto err_cleanup;
-	}
 
 	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
 	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
@@ -768,8 +760,15 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dpi);
 
+	dpi->bridge.funcs = &mtk_dpi_bridge_funcs;
+	dpi->bridge.of_node = dev->of_node;
+	dpi->bridge.type = DRM_MODE_CONNECTOR_DPI;
+
+	drm_bridge_add(&dpi->bridge);
+
 	ret = component_add(dev, &mtk_dpi_component_ops);
 	if (ret) {
+		drm_bridge_remove(&dpi->bridge);
 		dev_err(dev, "Failed to add component: %d\n", ret);
 		return ret;
 	}
@@ -779,7 +778,10 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 
 static int mtk_dpi_remove(struct platform_device *pdev)
 {
+	struct mtk_dpi *dpi = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &mtk_dpi_component_ops);
+	drm_bridge_remove(&dpi->bridge);
 
 	return 0;
 }
-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 2/3] drm/mediatek: mtk_dpi: Convert to bridge driver

[Enric Balletbo i Serra]

Convert mtk_dpi to a bridge driver with built-in encoder support for
compatibility with existing component drivers.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 66 +++++++++++++++---------------
 1 file changed, 34 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 7112125dc3d1..baad198c69eb 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -61,6 +61,7 @@ enum mtk_dpi_out_color_format {
 struct mtk_dpi {
 	struct mtk_ddp_comp ddp_comp;
 	struct drm_encoder encoder;
+	struct drm_bridge bridge;
 	struct drm_bridge *next_bridge;
 	void __iomem *regs;
 	struct device *dev;
@@ -77,9 +78,9 @@ struct mtk_dpi {
 	int refcount;
 };
 
-static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e)
+static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
 {
-	return container_of(e, struct mtk_dpi, encoder);
+	return container_of(b, struct mtk_dpi, bridge);
 }
 
 enum mtk_dpi_polarity {
@@ -518,50 +519,44 @@ static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
 	.destroy = mtk_dpi_encoder_destroy,
 };
 
-static bool mtk_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
-				       const struct drm_display_mode *mode,
-				       struct drm_display_mode *adjusted_mode)
+static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
+				 enum drm_bridge_attach_flags flags)
 {
-	return true;
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
+
+	return drm_bridge_attach(bridge->encoder, dpi->next_bridge,
+				 &dpi->bridge, flags);
 }
 
-static void mtk_dpi_encoder_mode_set(struct drm_encoder *encoder,
-				     struct drm_display_mode *mode,
-				     struct drm_display_mode *adjusted_mode)
+static void mtk_dpi_bridge_mode_set(struct drm_bridge *bridge,
+				const struct drm_display_mode *mode,
+				const struct drm_display_mode *adjusted_mode)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	drm_mode_copy(&dpi->mode, adjusted_mode);
 }
 
-static void mtk_dpi_encoder_disable(struct drm_encoder *encoder)
+static void mtk_dpi_bridge_disable(struct drm_bridge *bridge)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	mtk_dpi_power_off(dpi);
 }
 
-static void mtk_dpi_encoder_enable(struct drm_encoder *encoder)
+static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	mtk_dpi_power_on(dpi);
 	mtk_dpi_set_display_mode(dpi, &dpi->mode);
 }
 
-static int mtk_dpi_atomic_check(struct drm_encoder *encoder,
-				struct drm_crtc_state *crtc_state,
-				struct drm_connector_state *conn_state)
-{
-	return 0;
-}
-
-static const struct drm_encoder_helper_funcs mtk_dpi_encoder_helper_funcs = {
-	.mode_fixup = mtk_dpi_encoder_mode_fixup,
-	.mode_set = mtk_dpi_encoder_mode_set,
-	.disable = mtk_dpi_encoder_disable,
-	.enable = mtk_dpi_encoder_enable,
-	.atomic_check = mtk_dpi_atomic_check,
+static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
+	.attach = mtk_dpi_bridge_attach,
+	.mode_set = mtk_dpi_bridge_mode_set,
+	.disable = mtk_dpi_bridge_disable,
+	.enable = mtk_dpi_bridge_enable,
 };
 
 static void mtk_dpi_start(struct mtk_ddp_comp *comp)
@@ -602,16 +597,13 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 		dev_err(dev, "Failed to initialize decoder: %d\n", ret);
 		goto err_unregister;
 	}
-	drm_encoder_helper_add(&dpi->encoder, &mtk_dpi_encoder_helper_funcs);
 
 	/* Currently DPI0 is fixed to be driven by OVL1 */
 	dpi->encoder.possible_crtcs = BIT(1);
 
-	ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
-	if (ret) {
-		dev_err(dev, "Failed to attach bridge: %d\n", ret);
+	ret = drm_bridge_attach(&dpi->encoder, &dpi->bridge, NULL, 0);
+	if (ret)
 		goto err_cleanup;
-	}
 
 	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
 	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
@@ -768,8 +760,15 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dpi);
 
+	dpi->bridge.funcs = &mtk_dpi_bridge_funcs;
+	dpi->bridge.of_node = dev->of_node;
+	dpi->bridge.type = DRM_MODE_CONNECTOR_DPI;
+
+	drm_bridge_add(&dpi->bridge);
+
 	ret = component_add(dev, &mtk_dpi_component_ops);
 	if (ret) {
+		drm_bridge_remove(&dpi->bridge);
 		dev_err(dev, "Failed to add component: %d\n", ret);
 		return ret;
 	}
@@ -779,7 +778,10 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 
 static int mtk_dpi_remove(struct platform_device *pdev)
 {
+	struct mtk_dpi *dpi = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &mtk_dpi_component_ops);
+	drm_bridge_remove(&dpi->bridge);
 
 	return 0;
 }
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/3] drm/mediatek: mtk_dpi: Convert to bridge driver

[Enric Balletbo i Serra]

Convert mtk_dpi to a bridge driver with built-in encoder support for
compatibility with existing component drivers.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 66 +++++++++++++++---------------
 1 file changed, 34 insertions(+), 32 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 7112125dc3d1..baad198c69eb 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -61,6 +61,7 @@ enum mtk_dpi_out_color_format {
 struct mtk_dpi {
 	struct mtk_ddp_comp ddp_comp;
 	struct drm_encoder encoder;
+	struct drm_bridge bridge;
 	struct drm_bridge *next_bridge;
 	void __iomem *regs;
 	struct device *dev;
@@ -77,9 +78,9 @@ struct mtk_dpi {
 	int refcount;
 };
 
-static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e)
+static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
 {
-	return container_of(e, struct mtk_dpi, encoder);
+	return container_of(b, struct mtk_dpi, bridge);
 }
 
 enum mtk_dpi_polarity {
@@ -518,50 +519,44 @@ static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
 	.destroy = mtk_dpi_encoder_destroy,
 };
 
-static bool mtk_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
-				       const struct drm_display_mode *mode,
-				       struct drm_display_mode *adjusted_mode)
+static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
+				 enum drm_bridge_attach_flags flags)
 {
-	return true;
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
+
+	return drm_bridge_attach(bridge->encoder, dpi->next_bridge,
+				 &dpi->bridge, flags);
 }
 
-static void mtk_dpi_encoder_mode_set(struct drm_encoder *encoder,
-				     struct drm_display_mode *mode,
-				     struct drm_display_mode *adjusted_mode)
+static void mtk_dpi_bridge_mode_set(struct drm_bridge *bridge,
+				const struct drm_display_mode *mode,
+				const struct drm_display_mode *adjusted_mode)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	drm_mode_copy(&dpi->mode, adjusted_mode);
 }
 
-static void mtk_dpi_encoder_disable(struct drm_encoder *encoder)
+static void mtk_dpi_bridge_disable(struct drm_bridge *bridge)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	mtk_dpi_power_off(dpi);
 }
 
-static void mtk_dpi_encoder_enable(struct drm_encoder *encoder)
+static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
 {
-	struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
+	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
 
 	mtk_dpi_power_on(dpi);
 	mtk_dpi_set_display_mode(dpi, &dpi->mode);
 }
 
-static int mtk_dpi_atomic_check(struct drm_encoder *encoder,
-				struct drm_crtc_state *crtc_state,
-				struct drm_connector_state *conn_state)
-{
-	return 0;
-}
-
-static const struct drm_encoder_helper_funcs mtk_dpi_encoder_helper_funcs = {
-	.mode_fixup = mtk_dpi_encoder_mode_fixup,
-	.mode_set = mtk_dpi_encoder_mode_set,
-	.disable = mtk_dpi_encoder_disable,
-	.enable = mtk_dpi_encoder_enable,
-	.atomic_check = mtk_dpi_atomic_check,
+static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
+	.attach = mtk_dpi_bridge_attach,
+	.mode_set = mtk_dpi_bridge_mode_set,
+	.disable = mtk_dpi_bridge_disable,
+	.enable = mtk_dpi_bridge_enable,
 };
 
 static void mtk_dpi_start(struct mtk_ddp_comp *comp)
@@ -602,16 +597,13 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 		dev_err(dev, "Failed to initialize decoder: %d\n", ret);
 		goto err_unregister;
 	}
-	drm_encoder_helper_add(&dpi->encoder, &mtk_dpi_encoder_helper_funcs);
 
 	/* Currently DPI0 is fixed to be driven by OVL1 */
 	dpi->encoder.possible_crtcs = BIT(1);
 
-	ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
-	if (ret) {
-		dev_err(dev, "Failed to attach bridge: %d\n", ret);
+	ret = drm_bridge_attach(&dpi->encoder, &dpi->bridge, NULL, 0);
+	if (ret)
 		goto err_cleanup;
-	}
 
 	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
 	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
@@ -768,8 +760,15 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dpi);
 
+	dpi->bridge.funcs = &mtk_dpi_bridge_funcs;
+	dpi->bridge.of_node = dev->of_node;
+	dpi->bridge.type = DRM_MODE_CONNECTOR_DPI;
+
+	drm_bridge_add(&dpi->bridge);
+
 	ret = component_add(dev, &mtk_dpi_component_ops);
 	if (ret) {
+		drm_bridge_remove(&dpi->bridge);
 		dev_err(dev, "Failed to add component: %d\n", ret);
 		return ret;
 	}
@@ -779,7 +778,10 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 
 static int mtk_dpi_remove(struct platform_device *pdev)
 {
+	struct mtk_dpi *dpi = platform_get_drvdata(pdev);
+
 	component_del(&pdev->dev, &mtk_dpi_component_ops);
+	drm_bridge_remove(&dpi->bridge);
 
 	return 0;
 }
-- 
2.26.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 2/3] drm/mediatek: mtk_dpi: Convert to bridge driver

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> Convert mtk_dpi to a bridge driver with built-in encoder support for
> compatibility with existing component drivers.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 66 +++++++++++++++---------------
>  1 file changed, 34 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 7112125dc3d1..baad198c69eb 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -61,6 +61,7 @@ enum mtk_dpi_out_color_format {
>  struct mtk_dpi {
>         struct mtk_ddp_comp ddp_comp;
>         struct drm_encoder encoder;
> +       struct drm_bridge bridge;
>         struct drm_bridge *next_bridge;
>         void __iomem *regs;
>         struct device *dev;
> @@ -77,9 +78,9 @@ struct mtk_dpi {
>         int refcount;
>  };
>
> -static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e)
> +static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
>  {
> -       return container_of(e, struct mtk_dpi, encoder);
> +       return container_of(b, struct mtk_dpi, bridge);
>  }
>
>  enum mtk_dpi_polarity {
> @@ -518,50 +519,44 @@ static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
>         .destroy = mtk_dpi_encoder_destroy,
>  };
>
> -static bool mtk_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
> -                                      const struct drm_display_mode *mode,
> -                                      struct drm_display_mode *adjusted_mode)
> +static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
> +                                enum drm_bridge_attach_flags flags)
>  {
> -       return true;
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> +
> +       return drm_bridge_attach(bridge->encoder, dpi->next_bridge,
> +                                &dpi->bridge, flags);
>  }
>
> -static void mtk_dpi_encoder_mode_set(struct drm_encoder *encoder,
> -                                    struct drm_display_mode *mode,
> -                                    struct drm_display_mode *adjusted_mode)
> +static void mtk_dpi_bridge_mode_set(struct drm_bridge *bridge,
> +                               const struct drm_display_mode *mode,
> +                               const struct drm_display_mode *adjusted_mode)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         drm_mode_copy(&dpi->mode, adjusted_mode);
>  }
>
> -static void mtk_dpi_encoder_disable(struct drm_encoder *encoder)
> +static void mtk_dpi_bridge_disable(struct drm_bridge *bridge)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         mtk_dpi_power_off(dpi);
>  }
>
> -static void mtk_dpi_encoder_enable(struct drm_encoder *encoder)
> +static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         mtk_dpi_power_on(dpi);
>         mtk_dpi_set_display_mode(dpi, &dpi->mode);
>  }
>
> -static int mtk_dpi_atomic_check(struct drm_encoder *encoder,
> -                               struct drm_crtc_state *crtc_state,
> -                               struct drm_connector_state *conn_state)
> -{
> -       return 0;
> -}
> -
> -static const struct drm_encoder_helper_funcs mtk_dpi_encoder_helper_funcs = {
> -       .mode_fixup = mtk_dpi_encoder_mode_fixup,
> -       .mode_set = mtk_dpi_encoder_mode_set,
> -       .disable = mtk_dpi_encoder_disable,
> -       .enable = mtk_dpi_encoder_enable,
> -       .atomic_check = mtk_dpi_atomic_check,
> +static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
> +       .attach = mtk_dpi_bridge_attach,
> +       .mode_set = mtk_dpi_bridge_mode_set,
> +       .disable = mtk_dpi_bridge_disable,
> +       .enable = mtk_dpi_bridge_enable,
>  };
>
>  static void mtk_dpi_start(struct mtk_ddp_comp *comp)
> @@ -602,16 +597,13 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>                 dev_err(dev, "Failed to initialize decoder: %d\n", ret);
>                 goto err_unregister;
>         }
> -       drm_encoder_helper_add(&dpi->encoder, &mtk_dpi_encoder_helper_funcs);
>
>         /* Currently DPI0 is fixed to be driven by OVL1 */
>         dpi->encoder.possible_crtcs = BIT(1);
>
> -       ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
> -       if (ret) {
> -               dev_err(dev, "Failed to attach bridge: %d\n", ret);
> +       ret = drm_bridge_attach(&dpi->encoder, &dpi->bridge, NULL, 0);
> +       if (ret)
>                 goto err_cleanup;
> -       }
>
>         dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
>         dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> @@ -768,8 +760,15 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>
>         platform_set_drvdata(pdev, dpi);
>
> +       dpi->bridge.funcs = &mtk_dpi_bridge_funcs;
> +       dpi->bridge.of_node = dev->of_node;
> +       dpi->bridge.type = DRM_MODE_CONNECTOR_DPI;
> +
> +       drm_bridge_add(&dpi->bridge);
> +
>         ret = component_add(dev, &mtk_dpi_component_ops);
>         if (ret) {
> +               drm_bridge_remove(&dpi->bridge);
>                 dev_err(dev, "Failed to add component: %d\n", ret);
>                 return ret;
>         }
> @@ -779,7 +778,10 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>
>  static int mtk_dpi_remove(struct platform_device *pdev)
>  {
> +       struct mtk_dpi *dpi = platform_get_drvdata(pdev);
> +
>         component_del(&pdev->dev, &mtk_dpi_component_ops);
> +       drm_bridge_remove(&dpi->bridge);
>
>         return 0;
>  }
> --
> 2.26.2
>

Re: [PATCH 2/3] drm/mediatek: mtk_dpi: Convert to bridge driver

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> Convert mtk_dpi to a bridge driver with built-in encoder support for
> compatibility with existing component drivers.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 66 +++++++++++++++---------------
>  1 file changed, 34 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 7112125dc3d1..baad198c69eb 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -61,6 +61,7 @@ enum mtk_dpi_out_color_format {
>  struct mtk_dpi {
>         struct mtk_ddp_comp ddp_comp;
>         struct drm_encoder encoder;
> +       struct drm_bridge bridge;
>         struct drm_bridge *next_bridge;
>         void __iomem *regs;
>         struct device *dev;
> @@ -77,9 +78,9 @@ struct mtk_dpi {
>         int refcount;
>  };
>
> -static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e)
> +static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
>  {
> -       return container_of(e, struct mtk_dpi, encoder);
> +       return container_of(b, struct mtk_dpi, bridge);
>  }
>
>  enum mtk_dpi_polarity {
> @@ -518,50 +519,44 @@ static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
>         .destroy = mtk_dpi_encoder_destroy,
>  };
>
> -static bool mtk_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
> -                                      const struct drm_display_mode *mode,
> -                                      struct drm_display_mode *adjusted_mode)
> +static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
> +                                enum drm_bridge_attach_flags flags)
>  {
> -       return true;
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> +
> +       return drm_bridge_attach(bridge->encoder, dpi->next_bridge,
> +                                &dpi->bridge, flags);
>  }
>
> -static void mtk_dpi_encoder_mode_set(struct drm_encoder *encoder,
> -                                    struct drm_display_mode *mode,
> -                                    struct drm_display_mode *adjusted_mode)
> +static void mtk_dpi_bridge_mode_set(struct drm_bridge *bridge,
> +                               const struct drm_display_mode *mode,
> +                               const struct drm_display_mode *adjusted_mode)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         drm_mode_copy(&dpi->mode, adjusted_mode);
>  }
>
> -static void mtk_dpi_encoder_disable(struct drm_encoder *encoder)
> +static void mtk_dpi_bridge_disable(struct drm_bridge *bridge)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         mtk_dpi_power_off(dpi);
>  }
>
> -static void mtk_dpi_encoder_enable(struct drm_encoder *encoder)
> +static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         mtk_dpi_power_on(dpi);
>         mtk_dpi_set_display_mode(dpi, &dpi->mode);
>  }
>
> -static int mtk_dpi_atomic_check(struct drm_encoder *encoder,
> -                               struct drm_crtc_state *crtc_state,
> -                               struct drm_connector_state *conn_state)
> -{
> -       return 0;
> -}
> -
> -static const struct drm_encoder_helper_funcs mtk_dpi_encoder_helper_funcs = {
> -       .mode_fixup = mtk_dpi_encoder_mode_fixup,
> -       .mode_set = mtk_dpi_encoder_mode_set,
> -       .disable = mtk_dpi_encoder_disable,
> -       .enable = mtk_dpi_encoder_enable,
> -       .atomic_check = mtk_dpi_atomic_check,
> +static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
> +       .attach = mtk_dpi_bridge_attach,
> +       .mode_set = mtk_dpi_bridge_mode_set,
> +       .disable = mtk_dpi_bridge_disable,
> +       .enable = mtk_dpi_bridge_enable,
>  };
>
>  static void mtk_dpi_start(struct mtk_ddp_comp *comp)
> @@ -602,16 +597,13 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>                 dev_err(dev, "Failed to initialize decoder: %d\n", ret);
>                 goto err_unregister;
>         }
> -       drm_encoder_helper_add(&dpi->encoder, &mtk_dpi_encoder_helper_funcs);
>
>         /* Currently DPI0 is fixed to be driven by OVL1 */
>         dpi->encoder.possible_crtcs = BIT(1);
>
> -       ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
> -       if (ret) {
> -               dev_err(dev, "Failed to attach bridge: %d\n", ret);
> +       ret = drm_bridge_attach(&dpi->encoder, &dpi->bridge, NULL, 0);
> +       if (ret)
>                 goto err_cleanup;
> -       }
>
>         dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
>         dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> @@ -768,8 +760,15 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>
>         platform_set_drvdata(pdev, dpi);
>
> +       dpi->bridge.funcs = &mtk_dpi_bridge_funcs;
> +       dpi->bridge.of_node = dev->of_node;
> +       dpi->bridge.type = DRM_MODE_CONNECTOR_DPI;
> +
> +       drm_bridge_add(&dpi->bridge);
> +
>         ret = component_add(dev, &mtk_dpi_component_ops);
>         if (ret) {
> +               drm_bridge_remove(&dpi->bridge);
>                 dev_err(dev, "Failed to add component: %d\n", ret);
>                 return ret;
>         }
> @@ -779,7 +778,10 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>
>  static int mtk_dpi_remove(struct platform_device *pdev)
>  {
> +       struct mtk_dpi *dpi = platform_get_drvdata(pdev);
> +
>         component_del(&pdev->dev, &mtk_dpi_component_ops);
> +       drm_bridge_remove(&dpi->bridge);
>
>         return 0;
>  }
> --
> 2.26.2
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 2/3] drm/mediatek: mtk_dpi: Convert to bridge driver

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> Convert mtk_dpi to a bridge driver with built-in encoder support for
> compatibility with existing component drivers.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 66 +++++++++++++++---------------
>  1 file changed, 34 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 7112125dc3d1..baad198c69eb 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -61,6 +61,7 @@ enum mtk_dpi_out_color_format {
>  struct mtk_dpi {
>         struct mtk_ddp_comp ddp_comp;
>         struct drm_encoder encoder;
> +       struct drm_bridge bridge;
>         struct drm_bridge *next_bridge;
>         void __iomem *regs;
>         struct device *dev;
> @@ -77,9 +78,9 @@ struct mtk_dpi {
>         int refcount;
>  };
>
> -static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e)
> +static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
>  {
> -       return container_of(e, struct mtk_dpi, encoder);
> +       return container_of(b, struct mtk_dpi, bridge);
>  }
>
>  enum mtk_dpi_polarity {
> @@ -518,50 +519,44 @@ static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
>         .destroy = mtk_dpi_encoder_destroy,
>  };
>
> -static bool mtk_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
> -                                      const struct drm_display_mode *mode,
> -                                      struct drm_display_mode *adjusted_mode)
> +static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
> +                                enum drm_bridge_attach_flags flags)
>  {
> -       return true;
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> +
> +       return drm_bridge_attach(bridge->encoder, dpi->next_bridge,
> +                                &dpi->bridge, flags);
>  }
>
> -static void mtk_dpi_encoder_mode_set(struct drm_encoder *encoder,
> -                                    struct drm_display_mode *mode,
> -                                    struct drm_display_mode *adjusted_mode)
> +static void mtk_dpi_bridge_mode_set(struct drm_bridge *bridge,
> +                               const struct drm_display_mode *mode,
> +                               const struct drm_display_mode *adjusted_mode)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         drm_mode_copy(&dpi->mode, adjusted_mode);
>  }
>
> -static void mtk_dpi_encoder_disable(struct drm_encoder *encoder)
> +static void mtk_dpi_bridge_disable(struct drm_bridge *bridge)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         mtk_dpi_power_off(dpi);
>  }
>
> -static void mtk_dpi_encoder_enable(struct drm_encoder *encoder)
> +static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         mtk_dpi_power_on(dpi);
>         mtk_dpi_set_display_mode(dpi, &dpi->mode);
>  }
>
> -static int mtk_dpi_atomic_check(struct drm_encoder *encoder,
> -                               struct drm_crtc_state *crtc_state,
> -                               struct drm_connector_state *conn_state)
> -{
> -       return 0;
> -}
> -
> -static const struct drm_encoder_helper_funcs mtk_dpi_encoder_helper_funcs = {
> -       .mode_fixup = mtk_dpi_encoder_mode_fixup,
> -       .mode_set = mtk_dpi_encoder_mode_set,
> -       .disable = mtk_dpi_encoder_disable,
> -       .enable = mtk_dpi_encoder_enable,
> -       .atomic_check = mtk_dpi_atomic_check,
> +static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
> +       .attach = mtk_dpi_bridge_attach,
> +       .mode_set = mtk_dpi_bridge_mode_set,
> +       .disable = mtk_dpi_bridge_disable,
> +       .enable = mtk_dpi_bridge_enable,
>  };
>
>  static void mtk_dpi_start(struct mtk_ddp_comp *comp)
> @@ -602,16 +597,13 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>                 dev_err(dev, "Failed to initialize decoder: %d\n", ret);
>                 goto err_unregister;
>         }
> -       drm_encoder_helper_add(&dpi->encoder, &mtk_dpi_encoder_helper_funcs);
>
>         /* Currently DPI0 is fixed to be driven by OVL1 */
>         dpi->encoder.possible_crtcs = BIT(1);
>
> -       ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
> -       if (ret) {
> -               dev_err(dev, "Failed to attach bridge: %d\n", ret);
> +       ret = drm_bridge_attach(&dpi->encoder, &dpi->bridge, NULL, 0);
> +       if (ret)
>                 goto err_cleanup;
> -       }
>
>         dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
>         dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> @@ -768,8 +760,15 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>
>         platform_set_drvdata(pdev, dpi);
>
> +       dpi->bridge.funcs = &mtk_dpi_bridge_funcs;
> +       dpi->bridge.of_node = dev->of_node;
> +       dpi->bridge.type = DRM_MODE_CONNECTOR_DPI;
> +
> +       drm_bridge_add(&dpi->bridge);
> +
>         ret = component_add(dev, &mtk_dpi_component_ops);
>         if (ret) {
> +               drm_bridge_remove(&dpi->bridge);
>                 dev_err(dev, "Failed to add component: %d\n", ret);
>                 return ret;
>         }
> @@ -779,7 +778,10 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>
>  static int mtk_dpi_remove(struct platform_device *pdev)
>  {
> +       struct mtk_dpi *dpi = platform_get_drvdata(pdev);
> +
>         component_del(&pdev->dev, &mtk_dpi_component_ops);
> +       drm_bridge_remove(&dpi->bridge);
>
>         return 0;
>  }
> --
> 2.26.2
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 2/3] drm/mediatek: mtk_dpi: Convert to bridge driver

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> Convert mtk_dpi to a bridge driver with built-in encoder support for
> compatibility with existing component drivers.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 66 +++++++++++++++---------------
>  1 file changed, 34 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 7112125dc3d1..baad198c69eb 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -61,6 +61,7 @@ enum mtk_dpi_out_color_format {
>  struct mtk_dpi {
>         struct mtk_ddp_comp ddp_comp;
>         struct drm_encoder encoder;
> +       struct drm_bridge bridge;
>         struct drm_bridge *next_bridge;
>         void __iomem *regs;
>         struct device *dev;
> @@ -77,9 +78,9 @@ struct mtk_dpi {
>         int refcount;
>  };
>
> -static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e)
> +static inline struct mtk_dpi *bridge_to_dpi(struct drm_bridge *b)
>  {
> -       return container_of(e, struct mtk_dpi, encoder);
> +       return container_of(b, struct mtk_dpi, bridge);
>  }
>
>  enum mtk_dpi_polarity {
> @@ -518,50 +519,44 @@ static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
>         .destroy = mtk_dpi_encoder_destroy,
>  };
>
> -static bool mtk_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
> -                                      const struct drm_display_mode *mode,
> -                                      struct drm_display_mode *adjusted_mode)
> +static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
> +                                enum drm_bridge_attach_flags flags)
>  {
> -       return true;
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
> +
> +       return drm_bridge_attach(bridge->encoder, dpi->next_bridge,
> +                                &dpi->bridge, flags);
>  }
>
> -static void mtk_dpi_encoder_mode_set(struct drm_encoder *encoder,
> -                                    struct drm_display_mode *mode,
> -                                    struct drm_display_mode *adjusted_mode)
> +static void mtk_dpi_bridge_mode_set(struct drm_bridge *bridge,
> +                               const struct drm_display_mode *mode,
> +                               const struct drm_display_mode *adjusted_mode)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         drm_mode_copy(&dpi->mode, adjusted_mode);
>  }
>
> -static void mtk_dpi_encoder_disable(struct drm_encoder *encoder)
> +static void mtk_dpi_bridge_disable(struct drm_bridge *bridge)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         mtk_dpi_power_off(dpi);
>  }
>
> -static void mtk_dpi_encoder_enable(struct drm_encoder *encoder)
> +static void mtk_dpi_bridge_enable(struct drm_bridge *bridge)
>  {
> -       struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
> +       struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
>         mtk_dpi_power_on(dpi);
>         mtk_dpi_set_display_mode(dpi, &dpi->mode);
>  }
>
> -static int mtk_dpi_atomic_check(struct drm_encoder *encoder,
> -                               struct drm_crtc_state *crtc_state,
> -                               struct drm_connector_state *conn_state)
> -{
> -       return 0;
> -}
> -
> -static const struct drm_encoder_helper_funcs mtk_dpi_encoder_helper_funcs = {
> -       .mode_fixup = mtk_dpi_encoder_mode_fixup,
> -       .mode_set = mtk_dpi_encoder_mode_set,
> -       .disable = mtk_dpi_encoder_disable,
> -       .enable = mtk_dpi_encoder_enable,
> -       .atomic_check = mtk_dpi_atomic_check,
> +static const struct drm_bridge_funcs mtk_dpi_bridge_funcs = {
> +       .attach = mtk_dpi_bridge_attach,
> +       .mode_set = mtk_dpi_bridge_mode_set,
> +       .disable = mtk_dpi_bridge_disable,
> +       .enable = mtk_dpi_bridge_enable,
>  };
>
>  static void mtk_dpi_start(struct mtk_ddp_comp *comp)
> @@ -602,16 +597,13 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>                 dev_err(dev, "Failed to initialize decoder: %d\n", ret);
>                 goto err_unregister;
>         }
> -       drm_encoder_helper_add(&dpi->encoder, &mtk_dpi_encoder_helper_funcs);
>
>         /* Currently DPI0 is fixed to be driven by OVL1 */
>         dpi->encoder.possible_crtcs = BIT(1);
>
> -       ret = drm_bridge_attach(&dpi->encoder, dpi->next_bridge, NULL, 0);
> -       if (ret) {
> -               dev_err(dev, "Failed to attach bridge: %d\n", ret);
> +       ret = drm_bridge_attach(&dpi->encoder, &dpi->bridge, NULL, 0);
> +       if (ret)
>                 goto err_cleanup;
> -       }
>
>         dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
>         dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> @@ -768,8 +760,15 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>
>         platform_set_drvdata(pdev, dpi);
>
> +       dpi->bridge.funcs = &mtk_dpi_bridge_funcs;
> +       dpi->bridge.of_node = dev->of_node;
> +       dpi->bridge.type = DRM_MODE_CONNECTOR_DPI;
> +
> +       drm_bridge_add(&dpi->bridge);
> +
>         ret = component_add(dev, &mtk_dpi_component_ops);
>         if (ret) {
> +               drm_bridge_remove(&dpi->bridge);
>                 dev_err(dev, "Failed to add component: %d\n", ret);
>                 return ret;
>         }
> @@ -779,7 +778,10 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>
>  static int mtk_dpi_remove(struct platform_device *pdev)
>  {
> +       struct mtk_dpi *dpi = platform_get_drvdata(pdev);
> +
>         component_del(&pdev->dev, &mtk_dpi_component_ops);
> +       drm_bridge_remove(&dpi->bridge);
>
>         return 0;
>  }
> --
> 2.26.2
>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

[PATCH 3/3] drm/mediatek: mtk_dpi: Use simple encoder

[Enric Balletbo i Serra]

The mtk_dpi driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index baad198c69eb..80778b2aac2a 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -20,6 +20,7 @@
 #include <drm/drm_bridge.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_of.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "mtk_dpi_regs.h"
 #include "mtk_drm_ddp_comp.h"
@@ -510,15 +511,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	return 0;
 }
 
-static void mtk_dpi_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
-	.destroy = mtk_dpi_encoder_destroy,
-};
-
 static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
 				 enum drm_bridge_attach_flags flags)
 {
@@ -591,8 +583,8 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
-	ret = drm_encoder_init(drm_dev, &dpi->encoder, &mtk_dpi_encoder_funcs,
-			       DRM_MODE_ENCODER_TMDS, NULL);
+	ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
+				      DRM_MODE_ENCODER_TMDS);
 	if (ret) {
 		dev_err(dev, "Failed to initialize decoder: %d\n", ret);
 		goto err_unregister;
-- 
2.26.2

[PATCH 3/3] drm/mediatek: mtk_dpi: Use simple encoder

[Enric Balletbo i Serra]

The mtk_dpi driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index baad198c69eb..80778b2aac2a 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -20,6 +20,7 @@
 #include <drm/drm_bridge.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_of.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "mtk_dpi_regs.h"
 #include "mtk_drm_ddp_comp.h"
@@ -510,15 +511,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	return 0;
 }
 
-static void mtk_dpi_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
-	.destroy = mtk_dpi_encoder_destroy,
-};
-
 static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
 				 enum drm_bridge_attach_flags flags)
 {
@@ -591,8 +583,8 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
-	ret = drm_encoder_init(drm_dev, &dpi->encoder, &mtk_dpi_encoder_funcs,
-			       DRM_MODE_ENCODER_TMDS, NULL);
+	ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
+				      DRM_MODE_ENCODER_TMDS);
 	if (ret) {
 		dev_err(dev, "Failed to initialize decoder: %d\n", ret);
 		goto err_unregister;
-- 
2.26.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH 3/3] drm/mediatek: mtk_dpi: Use simple encoder

[Enric Balletbo i Serra]

The mtk_dpi driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index baad198c69eb..80778b2aac2a 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -20,6 +20,7 @@
 #include <drm/drm_bridge.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_of.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "mtk_dpi_regs.h"
 #include "mtk_drm_ddp_comp.h"
@@ -510,15 +511,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	return 0;
 }
 
-static void mtk_dpi_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
-	.destroy = mtk_dpi_encoder_destroy,
-};
-
 static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
 				 enum drm_bridge_attach_flags flags)
 {
@@ -591,8 +583,8 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
-	ret = drm_encoder_init(drm_dev, &dpi->encoder, &mtk_dpi_encoder_funcs,
-			       DRM_MODE_ENCODER_TMDS, NULL);
+	ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
+				      DRM_MODE_ENCODER_TMDS);
 	if (ret) {
 		dev_err(dev, "Failed to initialize decoder: %d\n", ret);
 		goto err_unregister;
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 3/3] drm/mediatek: mtk_dpi: Use simple encoder

[Enric Balletbo i Serra]

The mtk_dpi driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

 drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++-----------
 1 file changed, 3 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index baad198c69eb..80778b2aac2a 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -20,6 +20,7 @@
 #include <drm/drm_bridge.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_of.h>
+#include <drm/drm_simple_kms_helper.h>
 
 #include "mtk_dpi_regs.h"
 #include "mtk_drm_ddp_comp.h"
@@ -510,15 +511,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	return 0;
 }
 
-static void mtk_dpi_encoder_destroy(struct drm_encoder *encoder)
-{
-	drm_encoder_cleanup(encoder);
-}
-
-static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
-	.destroy = mtk_dpi_encoder_destroy,
-};
-
 static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
 				 enum drm_bridge_attach_flags flags)
 {
@@ -591,8 +583,8 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
 		return ret;
 	}
 
-	ret = drm_encoder_init(drm_dev, &dpi->encoder, &mtk_dpi_encoder_funcs,
-			       DRM_MODE_ENCODER_TMDS, NULL);
+	ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
+				      DRM_MODE_ENCODER_TMDS);
 	if (ret) {
 		dev_err(dev, "Failed to initialize decoder: %d\n", ret);
 		goto err_unregister;
-- 
2.26.2


_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 3/3] drm/mediatek: mtk_dpi: Use simple encoder

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> The mtk_dpi driver uses an empty implementation for its encoder. Replace
> the code with the generic simple encoder.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++-----------
>  1 file changed, 3 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index baad198c69eb..80778b2aac2a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -20,6 +20,7 @@
>  #include <drm/drm_bridge.h>
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_of.h>
> +#include <drm/drm_simple_kms_helper.h>
>
>  #include "mtk_dpi_regs.h"
>  #include "mtk_drm_ddp_comp.h"
> @@ -510,15 +511,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>         return 0;
>  }
>
> -static void mtk_dpi_encoder_destroy(struct drm_encoder *encoder)
> -{
> -       drm_encoder_cleanup(encoder);
> -}
> -
> -static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
> -       .destroy = mtk_dpi_encoder_destroy,
> -};
> -
>  static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
>                                  enum drm_bridge_attach_flags flags)
>  {
> @@ -591,8 +583,8 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>                 return ret;
>         }
>
> -       ret = drm_encoder_init(drm_dev, &dpi->encoder, &mtk_dpi_encoder_funcs,
> -                              DRM_MODE_ENCODER_TMDS, NULL);
> +       ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
> +                                     DRM_MODE_ENCODER_TMDS);
>         if (ret) {
>                 dev_err(dev, "Failed to initialize decoder: %d\n", ret);
>                 goto err_unregister;
> --
> 2.26.2
>

Re: [PATCH 3/3] drm/mediatek: mtk_dpi: Use simple encoder

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> The mtk_dpi driver uses an empty implementation for its encoder. Replace
> the code with the generic simple encoder.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++-----------
>  1 file changed, 3 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index baad198c69eb..80778b2aac2a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -20,6 +20,7 @@
>  #include <drm/drm_bridge.h>
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_of.h>
> +#include <drm/drm_simple_kms_helper.h>
>
>  #include "mtk_dpi_regs.h"
>  #include "mtk_drm_ddp_comp.h"
> @@ -510,15 +511,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>         return 0;
>  }
>
> -static void mtk_dpi_encoder_destroy(struct drm_encoder *encoder)
> -{
> -       drm_encoder_cleanup(encoder);
> -}
> -
> -static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
> -       .destroy = mtk_dpi_encoder_destroy,
> -};
> -
>  static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
>                                  enum drm_bridge_attach_flags flags)
>  {
> @@ -591,8 +583,8 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>                 return ret;
>         }
>
> -       ret = drm_encoder_init(drm_dev, &dpi->encoder, &mtk_dpi_encoder_funcs,
> -                              DRM_MODE_ENCODER_TMDS, NULL);
> +       ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
> +                                     DRM_MODE_ENCODER_TMDS);
>         if (ret) {
>                 dev_err(dev, "Failed to initialize decoder: %d\n", ret);
>                 goto err_unregister;
> --
> 2.26.2
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 3/3] drm/mediatek: mtk_dpi: Use simple encoder

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> The mtk_dpi driver uses an empty implementation for its encoder. Replace
> the code with the generic simple encoder.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++-----------
>  1 file changed, 3 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index baad198c69eb..80778b2aac2a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -20,6 +20,7 @@
>  #include <drm/drm_bridge.h>
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_of.h>
> +#include <drm/drm_simple_kms_helper.h>
>
>  #include "mtk_dpi_regs.h"
>  #include "mtk_drm_ddp_comp.h"
> @@ -510,15 +511,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>         return 0;
>  }
>
> -static void mtk_dpi_encoder_destroy(struct drm_encoder *encoder)
> -{
> -       drm_encoder_cleanup(encoder);
> -}
> -
> -static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
> -       .destroy = mtk_dpi_encoder_destroy,
> -};
> -
>  static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
>                                  enum drm_bridge_attach_flags flags)
>  {
> @@ -591,8 +583,8 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>                 return ret;
>         }
>
> -       ret = drm_encoder_init(drm_dev, &dpi->encoder, &mtk_dpi_encoder_funcs,
> -                              DRM_MODE_ENCODER_TMDS, NULL);
> +       ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
> +                                     DRM_MODE_ENCODER_TMDS);
>         if (ret) {
>                 dev_err(dev, "Failed to initialize decoder: %d\n", ret);
>                 goto err_unregister;
> --
> 2.26.2
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/3] drm/mediatek: mtk_dpi: Use simple encoder

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> The mtk_dpi driver uses an empty implementation for its encoder. Replace
> the code with the generic simple encoder.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>

>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++-----------
>  1 file changed, 3 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index baad198c69eb..80778b2aac2a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -20,6 +20,7 @@
>  #include <drm/drm_bridge.h>
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_of.h>
> +#include <drm/drm_simple_kms_helper.h>
>
>  #include "mtk_dpi_regs.h"
>  #include "mtk_drm_ddp_comp.h"
> @@ -510,15 +511,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>         return 0;
>  }
>
> -static void mtk_dpi_encoder_destroy(struct drm_encoder *encoder)
> -{
> -       drm_encoder_cleanup(encoder);
> -}
> -
> -static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
> -       .destroy = mtk_dpi_encoder_destroy,
> -};
> -
>  static int mtk_dpi_bridge_attach(struct drm_bridge *bridge,
>                                  enum drm_bridge_attach_flags flags)
>  {
> @@ -591,8 +583,8 @@ static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
>                 return ret;
>         }
>
> -       ret = drm_encoder_init(drm_dev, &dpi->encoder, &mtk_dpi_encoder_funcs,
> -                              DRM_MODE_ENCODER_TMDS, NULL);
> +       ret = drm_simple_encoder_init(drm_dev, &dpi->encoder,
> +                                     DRM_MODE_ENCODER_TMDS);
>         if (ret) {
>                 dev_err(dev, "Failed to initialize decoder: %d\n", ret);
>                 goto err_unregister;
> --
> 2.26.2
>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> The mtk-dpi driver still uses the drm_encoder API which is now somehow
> deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
> like we did for the mtk-dsi driver [1], this is another small step to be able to
> fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
> drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
> dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.

For this series, applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang.

>
> Best regards,
>  Enric
>
> [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559
>
> Enric Balletbo i Serra (3):
>   drm/mediatek: mtk_dpi: Rename bridge to next_bridge
>   drm/mediatek: mtk_dpi: Convert to bridge driver
>   drm/mediatek: mtk_dpi: Use simple encoder
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
>  1 file changed, 39 insertions(+), 45 deletions(-)
>
> --
> 2.26.2
>

Re: [PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> The mtk-dpi driver still uses the drm_encoder API which is now somehow
> deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
> like we did for the mtk-dsi driver [1], this is another small step to be able to
> fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
> drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
> dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.

For this series, applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang.

>
> Best regards,
>  Enric
>
> [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559
>
> Enric Balletbo i Serra (3):
>   drm/mediatek: mtk_dpi: Rename bridge to next_bridge
>   drm/mediatek: mtk_dpi: Convert to bridge driver
>   drm/mediatek: mtk_dpi: Use simple encoder
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
>  1 file changed, 39 insertions(+), 45 deletions(-)
>
> --
> 2.26.2
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> The mtk-dpi driver still uses the drm_encoder API which is now somehow
> deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
> like we did for the mtk-dsi driver [1], this is another small step to be able to
> fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
> drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
> dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.

For this series, applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang.

>
> Best regards,
>  Enric
>
> [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559
>
> Enric Balletbo i Serra (3):
>   drm/mediatek: mtk_dpi: Rename bridge to next_bridge
>   drm/mediatek: mtk_dpi: Convert to bridge driver
>   drm/mediatek: mtk_dpi: Use simple encoder
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
>  1 file changed, 39 insertions(+), 45 deletions(-)
>
> --
> 2.26.2
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Chun-Kuang Hu]

Hi, Enric:

Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
>
> The mtk-dpi driver still uses the drm_encoder API which is now somehow
> deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
> like we did for the mtk-dsi driver [1], this is another small step to be able to
> fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
> drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
> dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.

For this series, applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang.

>
> Best regards,
>  Enric
>
> [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559
>
> Enric Balletbo i Serra (3):
>   drm/mediatek: mtk_dpi: Rename bridge to next_bridge
>   drm/mediatek: mtk_dpi: Convert to bridge driver
>   drm/mediatek: mtk_dpi: Use simple encoder
>
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
>  1 file changed, 39 insertions(+), 45 deletions(-)
>
> --
> 2.26.2
>

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

Re: [PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Chun-Kuang Hu]

Hi, Enric:

Chun-Kuang Hu <chunkuang.hu@kernel.org> 於 2020年5月10日 週日 上午9:24寫道：
>
> Hi, Enric:
>
> Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
> >
> > The mtk-dpi driver still uses the drm_encoder API which is now somehow
> > deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
> > like we did for the mtk-dsi driver [1], this is another small step to be able to
> > fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
> > drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
> > dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.
>
> For this series, applied to mediatek-drm-next [1], thanks.
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next
>

I remove this series from mediatek-drm-next because drm bridge driver
need ack of drm bridge maintainer.

Regards,
Chun-Kuang.

> Regards,
> Chun-Kuang.
>
> >
> > Best regards,
> >  Enric
> >
> > [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559
> >
> > Enric Balletbo i Serra (3):
> >   drm/mediatek: mtk_dpi: Rename bridge to next_bridge
> >   drm/mediatek: mtk_dpi: Convert to bridge driver
> >   drm/mediatek: mtk_dpi: Use simple encoder
> >
> >  drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
> >  1 file changed, 39 insertions(+), 45 deletions(-)
> >
> > --
> > 2.26.2
> >

Re: [PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Chun-Kuang Hu]

Hi, Enric:

Chun-Kuang Hu <chunkuang.hu@kernel.org> 於 2020年5月10日 週日 上午9:24寫道：
>
> Hi, Enric:
>
> Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
> >
> > The mtk-dpi driver still uses the drm_encoder API which is now somehow
> > deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
> > like we did for the mtk-dsi driver [1], this is another small step to be able to
> > fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
> > drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
> > dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.
>
> For this series, applied to mediatek-drm-next [1], thanks.
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next
>

I remove this series from mediatek-drm-next because drm bridge driver
need ack of drm bridge maintainer.

Regards,
Chun-Kuang.

> Regards,
> Chun-Kuang.
>
> >
> > Best regards,
> >  Enric
> >
> > [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559
> >
> > Enric Balletbo i Serra (3):
> >   drm/mediatek: mtk_dpi: Rename bridge to next_bridge
> >   drm/mediatek: mtk_dpi: Convert to bridge driver
> >   drm/mediatek: mtk_dpi: Use simple encoder
> >
> >  drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
> >  1 file changed, 39 insertions(+), 45 deletions(-)
> >
> > --
> > 2.26.2
> >
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Chun-Kuang Hu]

Hi, Enric:

Chun-Kuang Hu <chunkuang.hu@kernel.org> 於 2020年5月10日 週日 上午9:24寫道：
>
> Hi, Enric:
>
> Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
> >
> > The mtk-dpi driver still uses the drm_encoder API which is now somehow
> > deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
> > like we did for the mtk-dsi driver [1], this is another small step to be able to
> > fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
> > drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
> > dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.
>
> For this series, applied to mediatek-drm-next [1], thanks.
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next
>

I remove this series from mediatek-drm-next because drm bridge driver
need ack of drm bridge maintainer.

Regards,
Chun-Kuang.

> Regards,
> Chun-Kuang.
>
> >
> > Best regards,
> >  Enric
> >
> > [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559
> >
> > Enric Balletbo i Serra (3):
> >   drm/mediatek: mtk_dpi: Rename bridge to next_bridge
> >   drm/mediatek: mtk_dpi: Convert to bridge driver
> >   drm/mediatek: mtk_dpi: Use simple encoder
> >
> >  drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
> >  1 file changed, 39 insertions(+), 45 deletions(-)
> >
> > --
> > 2.26.2
> >

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 0/3] Convert mtk-dpi to drm_bridge API

[Chun-Kuang Hu]

Hi, Enric:

Chun-Kuang Hu <chunkuang.hu@kernel.org> 於 2020年5月10日 週日 上午9:24寫道：
>
> Hi, Enric:
>
> Enric Balletbo i Serra <enric.balletbo@collabora.com> 於 2020年5月4日 週一 下午10:14寫道：
> >
> > The mtk-dpi driver still uses the drm_encoder API which is now somehow
> > deprecated. We started to move all the Mediatek drivers to the drm_bridge API,
> > like we did for the mtk-dsi driver [1], this is another small step to be able to
> > fully convert the DRM Mediatek drivers to the drm_bridge API. A dummy
> > drm_encoder is maintained in the mtk-dpi driver but the end goal is move all the
> > dummy drm_encoder (mtk-dsi, mtk-dpi, etc) to the main mtk_drm_drv driver.
>
> For this series, applied to mediatek-drm-next [1], thanks.
>
> [1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next
>

I remove this series from mediatek-drm-next because drm bridge driver
need ack of drm bridge maintainer.

Regards,
Chun-Kuang.

> Regards,
> Chun-Kuang.
>
> >
> > Best regards,
> >  Enric
> >
> > [1] https://lore.kernel.org/patchwork/project/lkml/list/?series=441559
> >
> > Enric Balletbo i Serra (3):
> >   drm/mediatek: mtk_dpi: Rename bridge to next_bridge
> >   drm/mediatek: mtk_dpi: Convert to bridge driver
> >   drm/mediatek: mtk_dpi: Use simple encoder
> >
> >  drivers/gpu/drm/mediatek/mtk_dpi.c | 84 ++++++++++++++----------------
> >  1 file changed, 39 insertions(+), 45 deletions(-)
> >
> > --
> > 2.26.2
> >

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek