All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ming Lei <ming.lei@redhat.com>
To: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org, Ming Lei <ming.lei@redhat.com>,
	John Garry <john.garry@huawei.com>,
	Bart Van Assche <bvanassche@acm.org>,
	Hannes Reinecke <hare@suse.com>, Christoph Hellwig <hch@lst.de>,
	Thomas Gleixner <tglx@linutronix.de>
Subject: [PATCH V10 06/11] blk-mq: prepare for draining IO when hctx's all CPUs are offline
Date: Tue,  5 May 2020 10:09:25 +0800	[thread overview]
Message-ID: <20200505020930.1146281-7-ming.lei@redhat.com> (raw)
In-Reply-To: <20200505020930.1146281-1-ming.lei@redhat.com>

Most of blk-mq drivers depend on managed IRQ's auto-affinity to setup
up queue mapping. Thomas mentioned the following point[1]:

"
 That was the constraint of managed interrupts from the very beginning:

  The driver/subsystem has to quiesce the interrupt line and the associated
  queue _before_ it gets shutdown in CPU unplug and not fiddle with it
  until it's restarted by the core when the CPU is plugged in again.
"

However, current blk-mq implementation doesn't quiesce hw queue before
the last CPU in the hctx is shutdown. Even worse, CPUHP_BLK_MQ_DEAD is
one cpuhp state handled after the CPU is down, so there isn't any chance
to quiesce hctx for blk-mq wrt. CPU hotplug.

Add new cpuhp state of CPUHP_AP_BLK_MQ_ONLINE for blk-mq to stop queues
and wait for completion of in-flight requests.

We will stop hw queue and wait for completion of in-flight requests
when one hctx is becoming dead in the following patch. This way may
cause dead-lock for some stacking blk-mq drivers, such as dm-rq and
loop.

Add blk-mq flag of BLK_MQ_F_NO_MANAGED_IRQ and mark it for dm-rq and
loop, so we needn't to wait for completion of in-flight requests from
dm-rq & loop, then the potential dead-lock can be avoided.

[1] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/

Cc: John Garry <john.garry@huawei.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
---
 block/blk-mq-debugfs.c     |  1 +
 block/blk-mq.c             | 19 +++++++++++++++++++
 drivers/block/loop.c       |  2 +-
 drivers/md/dm-rq.c         |  2 +-
 include/linux/blk-mq.h     |  3 +++
 include/linux/cpuhotplug.h |  1 +
 6 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c
index 96b7a35c898a..ddec58743e88 100644
--- a/block/blk-mq-debugfs.c
+++ b/block/blk-mq-debugfs.c
@@ -239,6 +239,7 @@ static const char *const hctx_flag_name[] = {
 	HCTX_FLAG_NAME(TAG_SHARED),
 	HCTX_FLAG_NAME(BLOCKING),
 	HCTX_FLAG_NAME(NO_SCHED),
+	HCTX_FLAG_NAME(NO_MANAGED_IRQ),
 };
 #undef HCTX_FLAG_NAME
 
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 6569d802e0d8..54c107be7a47 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2273,6 +2273,16 @@ int blk_mq_alloc_rqs(struct blk_mq_tag_set *set, struct blk_mq_tags *tags,
 	return -ENOMEM;
 }
 
+static int blk_mq_hctx_notify_online(unsigned int cpu, struct hlist_node *node)
+{
+	return 0;
+}
+
+static int blk_mq_hctx_notify_offline(unsigned int cpu, struct hlist_node *node)
+{
+	return 0;
+}
+
 /*
  * 'cpu' is going away. splice any existing rq_list entries from this
  * software queue to the hw queue dispatch list, and ensure that it
@@ -2309,6 +2319,9 @@ static int blk_mq_hctx_notify_dead(unsigned int cpu, struct hlist_node *node)
 
 static void blk_mq_remove_cpuhp(struct blk_mq_hw_ctx *hctx)
 {
+	if (!(hctx->flags & BLK_MQ_F_NO_MANAGED_IRQ))
+		cpuhp_state_remove_instance_nocalls(CPUHP_AP_BLK_MQ_ONLINE,
+						    &hctx->cpuhp_online);
 	cpuhp_state_remove_instance_nocalls(CPUHP_BLK_MQ_DEAD,
 					    &hctx->cpuhp_dead);
 }
@@ -2368,6 +2381,9 @@ static int blk_mq_init_hctx(struct request_queue *q,
 {
 	hctx->queue_num = hctx_idx;
 
+	if (!(hctx->flags & BLK_MQ_F_NO_MANAGED_IRQ))
+		cpuhp_state_add_instance_nocalls(CPUHP_AP_BLK_MQ_ONLINE,
+				&hctx->cpuhp_online);
 	cpuhp_state_add_instance_nocalls(CPUHP_BLK_MQ_DEAD, &hctx->cpuhp_dead);
 
 	hctx->tags = set->tags[hctx_idx];
@@ -3621,6 +3637,9 @@ static int __init blk_mq_init(void)
 {
 	cpuhp_setup_state_multi(CPUHP_BLK_MQ_DEAD, "block/mq:dead", NULL,
 				blk_mq_hctx_notify_dead);
+	cpuhp_setup_state_multi(CPUHP_AP_BLK_MQ_ONLINE, "block/mq:online",
+				blk_mq_hctx_notify_online,
+				blk_mq_hctx_notify_offline);
 	return 0;
 }
 subsys_initcall(blk_mq_init);
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index da693e6a834e..784f2e038b55 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -2037,7 +2037,7 @@ static int loop_add(struct loop_device **l, int i)
 	lo->tag_set.queue_depth = 128;
 	lo->tag_set.numa_node = NUMA_NO_NODE;
 	lo->tag_set.cmd_size = sizeof(struct loop_cmd);
-	lo->tag_set.flags = BLK_MQ_F_SHOULD_MERGE;
+	lo->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_NO_MANAGED_IRQ;
 	lo->tag_set.driver_data = lo;
 
 	err = blk_mq_alloc_tag_set(&lo->tag_set);
diff --git a/drivers/md/dm-rq.c b/drivers/md/dm-rq.c
index 3f8577e2c13b..5f1ff70ac029 100644
--- a/drivers/md/dm-rq.c
+++ b/drivers/md/dm-rq.c
@@ -547,7 +547,7 @@ int dm_mq_init_request_queue(struct mapped_device *md, struct dm_table *t)
 	md->tag_set->ops = &dm_mq_ops;
 	md->tag_set->queue_depth = dm_get_blk_mq_queue_depth();
 	md->tag_set->numa_node = md->numa_node_id;
-	md->tag_set->flags = BLK_MQ_F_SHOULD_MERGE;
+	md->tag_set->flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_NO_MANAGED_IRQ;
 	md->tag_set->nr_hw_queues = dm_get_blk_mq_nr_hw_queues();
 	md->tag_set->driver_data = md;
 
diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h
index d7307795439a..3763207d88eb 100644
--- a/include/linux/blk-mq.h
+++ b/include/linux/blk-mq.h
@@ -140,6 +140,8 @@ struct blk_mq_hw_ctx {
 	 */
 	atomic_t		nr_active;
 
+	/** @cpuhp_online: List to store request if CPU is going to die */
+	struct hlist_node	cpuhp_online;
 	/** @cpuhp_dead: List to store request if some CPU die. */
 	struct hlist_node	cpuhp_dead;
 	/** @kobj: Kernel object for sysfs. */
@@ -391,6 +393,7 @@ struct blk_mq_ops {
 enum {
 	BLK_MQ_F_SHOULD_MERGE	= 1 << 0,
 	BLK_MQ_F_TAG_SHARED	= 1 << 1,
+	BLK_MQ_F_NO_MANAGED_IRQ	= 1 << 2,
 	BLK_MQ_F_BLOCKING	= 1 << 5,
 	BLK_MQ_F_NO_SCHED	= 1 << 6,
 	BLK_MQ_F_ALLOC_POLICY_START_BIT = 8,
diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h
index 77d70b633531..24b3a77810b6 100644
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -152,6 +152,7 @@ enum cpuhp_state {
 	CPUHP_AP_SMPBOOT_THREADS,
 	CPUHP_AP_X86_VDSO_VMA_ONLINE,
 	CPUHP_AP_IRQ_AFFINITY_ONLINE,
+	CPUHP_AP_BLK_MQ_ONLINE,
 	CPUHP_AP_ARM_MVEBU_SYNC_CLOCKS,
 	CPUHP_AP_X86_INTEL_EPB_ONLINE,
 	CPUHP_AP_PERF_ONLINE,
-- 
2.25.2


  parent reply	other threads:[~2020-05-05  2:10 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-05  2:09 [PATCH V10 00/11] blk-mq: improvement CPU hotplug Ming Lei
2020-05-05  2:09 ` [PATCH V10 01/11] block: clone nr_integrity_segments and write_hint in blk_rq_prep_clone Ming Lei
2020-05-05  2:09 ` [PATCH V10 02/11] block: add helper for copying request Ming Lei
2020-05-05  2:09 ` [PATCH V10 03/11] blk-mq: mark blk_mq_get_driver_tag as static Ming Lei
2020-05-05  2:09 ` [PATCH V10 04/11] blk-mq: assign rq->tag in blk_mq_get_driver_tag Ming Lei
2020-05-05  2:09 ` [PATCH V10 05/11] blk-mq: support rq filter callback when iterating rqs Ming Lei
2020-05-08 23:32   ` Bart Van Assche
2020-05-09  0:18     ` Bart Van Assche
2020-05-09  2:05       ` Ming Lei
2020-05-09  3:08         ` Bart Van Assche
2020-05-09  3:52           ` Ming Lei
2020-05-05  2:09 ` Ming Lei [this message]
2020-05-05  6:14   ` [PATCH V10 06/11] blk-mq: prepare for draining IO when hctx's all CPUs are offline Hannes Reinecke
2020-05-08 23:26   ` Bart Van Assche
2020-05-09  2:09     ` Ming Lei
2020-05-09  3:11       ` Bart Van Assche
2020-05-09  3:56         ` Ming Lei
2020-05-05  2:09 ` [PATCH V10 07/11] blk-mq: stop to handle IO and drain IO before hctx becomes inactive Ming Lei
2020-05-08 23:39   ` Bart Van Assche
2020-05-09  2:20     ` Ming Lei
2020-05-09  3:24       ` Bart Van Assche
2020-05-09  4:10         ` Ming Lei
2020-05-09 14:18           ` Bart Van Assche
2020-05-11  1:45             ` Ming Lei
2020-05-11  3:20               ` Bart Van Assche
2020-05-11  3:48                 ` Ming Lei
2020-05-11 20:56                   ` Bart Van Assche
2020-05-12  1:25                     ` Ming Lei
2020-05-05  2:09 ` [PATCH V10 08/11] block: add blk_end_flush_machinery Ming Lei
2020-05-05  2:09 ` [PATCH V10 09/11] blk-mq: add blk_mq_hctx_handle_dead_cpu for handling cpu dead Ming Lei
2020-05-05  2:09 ` [PATCH V10 10/11] blk-mq: re-submit IO in case that hctx is inactive Ming Lei
2020-05-05  2:09 ` [PATCH V10 11/11] block: deactivate hctx when the hctx is actually inactive Ming Lei
2020-05-09 14:07   ` Bart Van Assche
2020-05-11  2:11     ` Ming Lei
2020-05-11  3:30       ` Bart Van Assche
2020-05-11  4:08         ` Ming Lei
2020-05-11 20:52           ` Bart Van Assche
2020-05-12  1:43             ` Ming Lei
2020-05-12  2:08             ` Ming Lei
2020-05-08 21:49 ` [PATCH V10 00/11] blk-mq: improvement CPU hotplug Ming Lei
2020-05-09  3:17   ` Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200505020930.1146281-7-ming.lei@redhat.com \
    --to=ming.lei@redhat.com \
    --cc=axboe@kernel.dk \
    --cc=bvanassche@acm.org \
    --cc=hare@suse.com \
    --cc=hch@lst.de \
    --cc=john.garry@huawei.com \
    --cc=linux-block@vger.kernel.org \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.