[PATCH AUTOSEL 5.6 01/50] RDMA/mlx4: Initialize ib_spec on the stack

[PATCH AUTOSEL 5.6 01/50] RDMA/mlx4: Initialize ib_spec on the stack

[Sasha Levin]

From: Alaa Hleihel <alaa@mellanox.com>

[ Upstream commit c08cfb2d8d78bfe81b37cc6ba84f0875bddd0d5c ]

Initialize ib_spec on the stack before using it, otherwise we will have
garbage values that will break creating default rules with invalid parsing
error.

Fixes: a37a1a428431 ("IB/mlx4: Add mechanism to support flow steering over IB links")
Link: https://lore.kernel.org/r/20200413132235.930642-1-leon@kernel.org
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx4/main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index 2f5d9b181848b..e5758eb0b7d27 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -1502,8 +1502,9 @@ static int __mlx4_ib_create_default_rules(
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(pdefault_rules->rules_create_list); i++) {
+		union ib_flow_spec ib_spec = {};
 		int ret;
-		union ib_flow_spec ib_spec;
+
 		switch (pdefault_rules->rules_create_list[i]) {
 		case 0:
 			/* no rule */
-- 
2.20.1

[PATCH AUTOSEL 5.6 02/50] RDMA/siw: Fix potential siw_mem refcnt leak in siw_fastreg_mr()

[Sasha Levin]

From: Jason Gunthorpe <jgg@mellanox.com>

[ Upstream commit 6e051971b0e2eeb0ce7ec65d3cc8180450512d36 ]

siw_fastreg_mr() invokes siw_mem_id2obj(), which returns a local reference
of the siw_mem object to "mem" with increased refcnt.  When
siw_fastreg_mr() returns, "mem" becomes invalid, so the refcount should be
decreased to keep refcount balanced.

The issue happens in one error path of siw_fastreg_mr(). When "base_mr"
equals to NULL but "mem" is not NULL, the function forgets to decrease the
refcnt increased by siw_mem_id2obj() and causes a refcnt leak.

Reorganize the flow so that the goto unwind can be used as expected.

Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
Link: https://lore.kernel.org/r/1586939949-69856-1-git-send-email-xiyuyang19@fudan.edu.cn
Reported-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/siw/siw_qp_tx.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/sw/siw/siw_qp_tx.c b/drivers/infiniband/sw/siw/siw_qp_tx.c
index ae92c8080967c..9f53aa4feb878 100644
--- a/drivers/infiniband/sw/siw/siw_qp_tx.c
+++ b/drivers/infiniband/sw/siw/siw_qp_tx.c
@@ -920,20 +920,27 @@ static int siw_fastreg_mr(struct ib_pd *pd, struct siw_sqe *sqe)
 {
 	struct ib_mr *base_mr = (struct ib_mr *)(uintptr_t)sqe->base_mr;
 	struct siw_device *sdev = to_siw_dev(pd->device);
-	struct siw_mem *mem = siw_mem_id2obj(sdev, sqe->rkey  >> 8);
+	struct siw_mem *mem;
 	int rv = 0;
 
 	siw_dbg_pd(pd, "STag 0x%08x\n", sqe->rkey);
 
-	if (unlikely(!mem || !base_mr)) {
+	if (unlikely(!base_mr)) {
 		pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey);
 		return -EINVAL;
 	}
+
 	if (unlikely(base_mr->rkey >> 8 != sqe->rkey  >> 8)) {
 		pr_warn("siw: fastreg: STag 0x%08x: bad MR\n", sqe->rkey);
-		rv = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
+
+	mem = siw_mem_id2obj(sdev, sqe->rkey  >> 8);
+	if (unlikely(!mem)) {
+		pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey);
+		return -EINVAL;
+	}
+
 	if (unlikely(mem->pd != pd)) {
 		pr_warn("siw: fastreg: PD mismatch\n");
 		rv = -EINVAL;
-- 
2.20.1

[PATCH AUTOSEL 5.6 03/50] dmaengine: hisilicon: Fix build error without PCI_MSI

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit ae148b43516d90756ff8255925fb7df142b0c76e ]

If PCI_MSI is not set, building fais:

drivers/dma/hisi_dma.c: In function ‘hisi_dma_free_irq_vectors’:
drivers/dma/hisi_dma.c:138:2: error: implicit declaration of function ‘pci_free_irq_vectors’;
 did you mean ‘pci_alloc_irq_vectors’? [-Werror=implicit-function-declaration]
  pci_free_irq_vectors(data);
  ^~~~~~~~~~~~~~~~~~~~

Make HISI_DMA depends on PCI_MSI to fix this.

Fixes: e9f08b65250d ("dmaengine: hisilicon: Add Kunpeng DMA engine support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200328114133.17560-1-yuehaibing@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 5142da401db3f..c7e1dfe81d1e6 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -241,7 +241,8 @@ config FSL_RAID
 
 config HISI_DMA
 	tristate "HiSilicon DMA Engine support"
-	depends on ARM64 || (COMPILE_TEST && PCI_MSI)
+	depends on ARM64 || COMPILE_TEST
+	depends on PCI_MSI
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
-- 
2.20.1

[PATCH AUTOSEL 5.6 04/50] dmaengine: ti: k3-psil: fix deadlock on error path

[Sasha Levin]

From: Grygorii Strashko <grygorii.strashko@ti.com>

[ Upstream commit 172d59ecd61b89f535ad99a7e531c0f111453b9a ]

The mutex_unlock() is missed on error path of psil_get_ep_config()
which causes deadlock, so add missed mutex_unlock().

Fixes: 8c6bb62f6b4a ("dmaengine: ti: k3 PSI-L remote endpoint configuration")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200408185501.30776-1-grygorii.strashko@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ti/k3-psil.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/ti/k3-psil.c b/drivers/dma/ti/k3-psil.c
index d7b965049ccb1..fb7c8150b0d1d 100644
--- a/drivers/dma/ti/k3-psil.c
+++ b/drivers/dma/ti/k3-psil.c
@@ -27,6 +27,7 @@ struct psil_endpoint_config *psil_get_ep_config(u32 thread_id)
 			soc_ep_map = &j721e_ep_map;
 		} else {
 			pr_err("PSIL: No compatible machine found for map\n");
+			mutex_unlock(&ep_map_mutex);
 			return ERR_PTR(-ENOTSUPP);
 		}
 		pr_debug("%s: Using map for %s\n", __func__, soc_ep_map->name);
-- 
2.20.1

[PATCH AUTOSEL 5.6 05/50] dmaengine: xilinx_dma: Add missing check for empty list

[Sasha Levin]

From: Sebastian von Ohr <vonohr@smaract.com>

[ Upstream commit b269426011bcfd97b7c3101abfe1a99147b6f40b ]

The DMA transfer might finish just after checking the state with
dma_cookie_status, but before the lock is acquired. Not checking
for an empty list in xilinx_dma_tx_status may result in reading
random data or data corruption when desc is written to. This can
be reliably triggered by using dma_sync_wait to wait for DMA
completion.

Signed-off-by: Sebastian von Ohr <vonohr@smaract.com>
Tested-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20200303130518.333-1-vonohr@smaract.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index a9c5d5cc9f2bd..5d5f1d0ce16cb 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -1229,16 +1229,16 @@ static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
 		return ret;
 
 	spin_lock_irqsave(&chan->lock, flags);
-
-	desc = list_last_entry(&chan->active_list,
-			       struct xilinx_dma_tx_descriptor, node);
-	/*
-	 * VDMA and simple mode do not support residue reporting, so the
-	 * residue field will always be 0.
-	 */
-	if (chan->has_sg && chan->xdev->dma_config->dmatype != XDMA_TYPE_VDMA)
-		residue = xilinx_dma_get_residue(chan, desc);
-
+	if (!list_empty(&chan->active_list)) {
+		desc = list_last_entry(&chan->active_list,
+				       struct xilinx_dma_tx_descriptor, node);
+		/*
+		 * VDMA and simple mode do not support residue reporting, so the
+		 * residue field will always be 0.
+		 */
+		if (chan->has_sg && chan->xdev->dma_config->dmatype != XDMA_TYPE_VDMA)
+			residue = xilinx_dma_get_residue(chan, desc);
+	}
 	spin_unlock_irqrestore(&chan->lock, flags);
 
 	dma_set_residue(txstate, residue);
-- 
2.20.1

[PATCH AUTOSEL 5.6 05/50] dmaengine: xilinx_dma: Add missing check for empty list

[Sasha Levin]

From: Sebastian von Ohr <vonohr@smaract.com>

[ Upstream commit b269426011bcfd97b7c3101abfe1a99147b6f40b ]

The DMA transfer might finish just after checking the state with
dma_cookie_status, but before the lock is acquired. Not checking
for an empty list in xilinx_dma_tx_status may result in reading
random data or data corruption when desc is written to. This can
be reliably triggered by using dma_sync_wait to wait for DMA
completion.

Signed-off-by: Sebastian von Ohr <vonohr@smaract.com>
Tested-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/20200303130518.333-1-vonohr@smaract.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/xilinx/xilinx_dma.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index a9c5d5cc9f2bd..5d5f1d0ce16cb 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -1229,16 +1229,16 @@ static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
 		return ret;
 
 	spin_lock_irqsave(&chan->lock, flags);
-
-	desc = list_last_entry(&chan->active_list,
-			       struct xilinx_dma_tx_descriptor, node);
-	/*
-	 * VDMA and simple mode do not support residue reporting, so the
-	 * residue field will always be 0.
-	 */
-	if (chan->has_sg && chan->xdev->dma_config->dmatype != XDMA_TYPE_VDMA)
-		residue = xilinx_dma_get_residue(chan, desc);
-
+	if (!list_empty(&chan->active_list)) {
+		desc = list_last_entry(&chan->active_list,
+				       struct xilinx_dma_tx_descriptor, node);
+		/*
+		 * VDMA and simple mode do not support residue reporting, so the
+		 * residue field will always be 0.
+		 */
+		if (chan->has_sg && chan->xdev->dma_config->dmatype != XDMA_TYPE_VDMA)
+			residue = xilinx_dma_get_residue(chan, desc);
+	}
 	spin_unlock_irqrestore(&chan->lock, flags);
 
 	dma_set_residue(txstate, residue);
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 06/50] nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl

[Sasha Levin]

From: Andreas Gruenbacher <agruenba@redhat.com>

[ Upstream commit 7648f939cb919b9d15c21fff8cd9eba908d595dc ]

nfs3_set_acl keeps track of the acl it allocated locally to determine if an acl
needs to be released at the end.  This results in a memory leak when the
function allocates an acl as well as a default acl.  Fix by releasing acls
that differ from the acl originally passed into nfs3_set_acl.

Fixes: b7fa0554cf1b ("[PATCH] NFS: Add support for NFSv3 ACLs")
Reported-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs3acl.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)

diff --git a/fs/nfs/nfs3acl.c b/fs/nfs/nfs3acl.c
index c5c3fc6e6c600..26c94b32d6f49 100644
--- a/fs/nfs/nfs3acl.c
+++ b/fs/nfs/nfs3acl.c
@@ -253,37 +253,45 @@ int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
 
 int nfs3_set_acl(struct inode *inode, struct posix_acl *acl, int type)
 {
-	struct posix_acl *alloc = NULL, *dfacl = NULL;
+	struct posix_acl *orig = acl, *dfacl = NULL, *alloc;
 	int status;
 
 	if (S_ISDIR(inode->i_mode)) {
 		switch(type) {
 		case ACL_TYPE_ACCESS:
-			alloc = dfacl = get_acl(inode, ACL_TYPE_DEFAULT);
+			alloc = get_acl(inode, ACL_TYPE_DEFAULT);
 			if (IS_ERR(alloc))
 				goto fail;
+			dfacl = alloc;
 			break;
 
 		case ACL_TYPE_DEFAULT:
-			dfacl = acl;
-			alloc = acl = get_acl(inode, ACL_TYPE_ACCESS);
+			alloc = get_acl(inode, ACL_TYPE_ACCESS);
 			if (IS_ERR(alloc))
 				goto fail;
+			dfacl = acl;
+			acl = alloc;
 			break;
 		}
 	}
 
 	if (acl == NULL) {
-		alloc = acl = posix_acl_from_mode(inode->i_mode, GFP_KERNEL);
+		alloc = posix_acl_from_mode(inode->i_mode, GFP_KERNEL);
 		if (IS_ERR(alloc))
 			goto fail;
+		acl = alloc;
 	}
 	status = __nfs3_proc_setacls(inode, acl, dfacl);
-	posix_acl_release(alloc);
+out:
+	if (acl != orig)
+		posix_acl_release(acl);
+	if (dfacl != orig)
+		posix_acl_release(dfacl);
 	return status;
 
 fail:
-	return PTR_ERR(alloc);
+	status = PTR_ERR(alloc);
+	goto out;
 }
 
 const struct xattr_handler *nfs3_xattr_handlers[] = {
-- 
2.20.1

[PATCH AUTOSEL 5.6 07/50] vfio: avoid possible overflow in vfio_iommu_type1_pin_pages

[Sasha Levin]

From: Yan Zhao <yan.y.zhao@intel.com>

[ Upstream commit 0ea971f8dcd6dee78a9a30ea70227cf305f11ff7 ]

add parentheses to avoid possible vaddr overflow.

Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/vfio_iommu_type1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index a177bf2c66834..ec9be79ba2d79 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -554,7 +554,7 @@ static int vfio_iommu_type1_pin_pages(void *iommu_data,
 			continue;
 		}
 
-		remote_vaddr = dma->vaddr + iova - dma->iova;
+		remote_vaddr = dma->vaddr + (iova - dma->iova);
 		ret = vfio_pin_page_external(dma, remote_vaddr, &phys_pfn[i],
 					     do_accounting);
 		if (ret)
-- 
2.20.1

[PATCH AUTOSEL 5.6 08/50] riscv: fix vdso build with lld

[Sasha Levin]

From: Ilie Halip <ilie.halip@gmail.com>

[ Upstream commit 3c1918c8f54166598195d938564072664a8275b1 ]

When building with the LLVM linker this error occurrs:
    LD      arch/riscv/kernel/vdso/vdso-syms.o
  ld.lld: error: no input files

This happens because the lld treats -R as an alias to -rpath, as opposed
to ld where -R means --just-symbols.

Use the long option name for compatibility between the two.

Link: https://github.com/ClangBuiltLinux/linux/issues/805
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/vdso/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index 33b16f4212f7a..a4ee3a0e7d20d 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -33,15 +33,15 @@ $(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE
 	$(call if_changed,vdsold)
 
 # We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO.  With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
+# table and layout of the linked DSO. With ld --just-symbols we can then
+# refer to these symbols in the kernel code rather than hand-coded addresses.
 
 SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
 	-Wl,--build-id -Wl,--hash-style=both
 $(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/rt_sigreturn.o FORCE
 	$(call if_changed,vdsold)
 
-LDFLAGS_vdso-syms.o := -r -R
+LDFLAGS_vdso-syms.o := -r --just-symbols
 $(obj)/vdso-syms.o: $(obj)/vdso-dummy.o FORCE
 	$(call if_changed,ld)
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 08/50] riscv: fix vdso build with lld

[Sasha Levin]

From: Ilie Halip <ilie.halip@gmail.com>

[ Upstream commit 3c1918c8f54166598195d938564072664a8275b1 ]

When building with the LLVM linker this error occurrs:
    LD      arch/riscv/kernel/vdso/vdso-syms.o
  ld.lld: error: no input files

This happens because the lld treats -R as an alias to -rpath, as opposed
to ld where -R means --just-symbols.

Use the long option name for compatibility between the two.

Link: https://github.com/ClangBuiltLinux/linux/issues/805
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/riscv/kernel/vdso/Makefile | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/kernel/vdso/Makefile b/arch/riscv/kernel/vdso/Makefile
index 33b16f4212f7a..a4ee3a0e7d20d 100644
--- a/arch/riscv/kernel/vdso/Makefile
+++ b/arch/riscv/kernel/vdso/Makefile
@@ -33,15 +33,15 @@ $(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE
 	$(call if_changed,vdsold)
 
 # We also create a special relocatable object that should mirror the symbol
-# table and layout of the linked DSO.  With ld -R we can then refer to
-# these symbols in the kernel code rather than hand-coded addresses.
+# table and layout of the linked DSO. With ld --just-symbols we can then
+# refer to these symbols in the kernel code rather than hand-coded addresses.
 
 SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
 	-Wl,--build-id -Wl,--hash-style=both
 $(obj)/vdso-dummy.o: $(src)/vdso.lds $(obj)/rt_sigreturn.o FORCE
 	$(call if_changed,vdsold)
 
-LDFLAGS_vdso-syms.o := -r -R
+LDFLAGS_vdso-syms.o := -r --just-symbols
 $(obj)/vdso-syms.o: $(obj)/vdso-dummy.o FORCE
 	$(call if_changed,ld)
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 09/50] scsi: qla2xxx: set UNLOADING before waiting for session deletion

[Sasha Levin]

From: Martin Wilck <mwilck@suse.com>

[ Upstream commit 856e152a3c08bf7987cbd41900741d83d9cddc8e ]

The purpose of the UNLOADING flag is to avoid port login procedures to
continue when a controller is in the process of shutting down.  It makes
sense to set this flag before starting session teardown.

Furthermore, use atomic test_and_set_bit() to avoid the shutdown being run
multiple times in parallel. In qla2x00_disable_board_on_pci_error(), the
test for UNLOADING is postponed until after the check for an already
disabled PCI board.

Link: https://lore.kernel.org/r/20200421204621.19228-2-mwilck@suse.com
Fixes: 45235022da99 ("scsi: qla2xxx: Fix driver unload by shutting down chip")
Reviewed-by: Arun Easi <aeasi@marvell.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_os.c | 32 ++++++++++++++------------------
 1 file changed, 14 insertions(+), 18 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7a94e1171c726..4a89202115521 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -3720,6 +3720,13 @@ qla2x00_remove_one(struct pci_dev *pdev)
 	}
 	qla2x00_wait_for_hba_ready(base_vha);
 
+	/*
+	 * if UNLOADING flag is already set, then continue unload,
+	 * where it was set first.
+	 */
+	if (test_and_set_bit(UNLOADING, &base_vha->dpc_flags))
+		return;
+
 	if (IS_QLA25XX(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha) ||
 	    IS_QLA28XX(ha)) {
 		if (ha->flags.fw_started)
@@ -3738,15 +3745,6 @@ qla2x00_remove_one(struct pci_dev *pdev)
 
 	qla2x00_wait_for_sess_deletion(base_vha);
 
-	/*
-	 * if UNLOAD flag is already set, then continue unload,
-	 * where it was set first.
-	 */
-	if (test_bit(UNLOADING, &base_vha->dpc_flags))
-		return;
-
-	set_bit(UNLOADING, &base_vha->dpc_flags);
-
 	qla_nvme_delete(base_vha);
 
 	dma_free_coherent(&ha->pdev->dev,
@@ -6044,13 +6042,6 @@ qla2x00_disable_board_on_pci_error(struct work_struct *work)
 	struct pci_dev *pdev = ha->pdev;
 	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 
-	/*
-	 * if UNLOAD flag is already set, then continue unload,
-	 * where it was set first.
-	 */
-	if (test_bit(UNLOADING, &base_vha->dpc_flags))
-		return;
-
 	ql_log(ql_log_warn, base_vha, 0x015b,
 	    "Disabling adapter.\n");
 
@@ -6061,9 +6052,14 @@ qla2x00_disable_board_on_pci_error(struct work_struct *work)
 		return;
 	}
 
-	qla2x00_wait_for_sess_deletion(base_vha);
+	/*
+	 * if UNLOADING flag is already set, then continue unload,
+	 * where it was set first.
+	 */
+	if (test_and_set_bit(UNLOADING, &base_vha->dpc_flags))
+		return;
 
-	set_bit(UNLOADING, &base_vha->dpc_flags);
+	qla2x00_wait_for_sess_deletion(base_vha);
 
 	qla2x00_delete_all_vps(ha, base_vha);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 10/50] scsi: qla2xxx: check UNLOADING before posting async work

[Sasha Levin]

From: Martin Wilck <mwilck@suse.com>

[ Upstream commit 5a263892d7d0b4fe351363f8d1a14c6a75955475 ]

qlt_free_session_done() tries to post async PRLO / LOGO, and waits for the
completion of these async commands. If UNLOADING is set, this is doomed to
timeout, because the async logout command will never complete.

The only way to avoid waiting pointlessly is to fail posting these commands
in the first place if the driver is in UNLOADING state.  In general,
posting any command should be avoided when the driver is UNLOADING.

With this patch, "rmmod qla2xxx" completes without noticeable delay.

Link: https://lore.kernel.org/r/20200421204621.19228-3-mwilck@suse.com
Fixes: 45235022da99 ("scsi: qla2xxx: Fix driver unload by shutting down chip")
Acked-by: Arun Easi <aeasi@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_os.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 4a89202115521..98908c2a096a7 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -4854,6 +4854,9 @@ qla2x00_alloc_work(struct scsi_qla_host *vha, enum qla_work_type type)
 	struct qla_work_evt *e;
 	uint8_t bail;
 
+	if (test_bit(UNLOADING, &vha->dpc_flags))
+		return NULL;
+
 	QLA_VHA_MARK_BUSY(vha, bail);
 	if (bail)
 		return NULL;
-- 
2.20.1

[PATCH AUTOSEL 5.6 11/50] scsi: target/iblock: fix WRITE SAME zeroing

[Sasha Levin]

From: David Disseldorp <ddiss@suse.de>

[ Upstream commit 1d2ff149b263c9325875726a7804a0c75ef7112e ]

SBC4 specifies that WRITE SAME requests with the UNMAP bit set to zero
"shall perform the specified write operation to each LBA specified by the
command".  Commit 2237498f0b5c ("target/iblock: Convert WRITE_SAME to
blkdev_issue_zeroout") modified the iblock backend to call
blkdev_issue_zeroout() when handling WRITE SAME requests with UNMAP=0 and a
zero data segment.

The iblock blkdev_issue_zeroout() call incorrectly provides a flags
parameter of 0 (bool false), instead of BLKDEV_ZERO_NOUNMAP.  The bool
false parameter reflects the blkdev_issue_zeroout() API prior to commit
ee472d835c26 ("block: add a flags argument to (__)blkdev_issue_zeroout")
which was merged shortly before 2237498f0b5c.

Link: https://lore.kernel.org/r/20200419163109.11689-1-ddiss@suse.de
Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_iblock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index 51ffd5c002dee..1c181d31f4c87 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -432,7 +432,7 @@ iblock_execute_zero_out(struct block_device *bdev, struct se_cmd *cmd)
 				target_to_linux_sector(dev, cmd->t_task_lba),
 				target_to_linux_sector(dev,
 					sbc_get_write_same_sectors(cmd)),
-				GFP_KERNEL, false);
+				GFP_KERNEL, BLKDEV_ZERO_NOUNMAP);
 	if (ret)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 11/50] scsi: target/iblock: fix WRITE SAME zeroing

[Sasha Levin]

From: David Disseldorp <ddiss@suse.de>

[ Upstream commit 1d2ff149b263c9325875726a7804a0c75ef7112e ]

SBC4 specifies that WRITE SAME requests with the UNMAP bit set to zero
"shall perform the specified write operation to each LBA specified by the
command".  Commit 2237498f0b5c ("target/iblock: Convert WRITE_SAME to
blkdev_issue_zeroout") modified the iblock backend to call
blkdev_issue_zeroout() when handling WRITE SAME requests with UNMAP=0 and a
zero data segment.

The iblock blkdev_issue_zeroout() call incorrectly provides a flags
parameter of 0 (bool false), instead of BLKDEV_ZERO_NOUNMAP.  The bool
false parameter reflects the blkdev_issue_zeroout() API prior to commit
ee472d835c26 ("block: add a flags argument to (__)blkdev_issue_zeroout")
which was merged shortly before 2237498f0b5c.

Link: https://lore.kernel.org/r/20200419163109.11689-1-ddiss@suse.de
Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/target/target_core_iblock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c
index 51ffd5c002dee..1c181d31f4c87 100644
--- a/drivers/target/target_core_iblock.c
+++ b/drivers/target/target_core_iblock.c
@@ -432,7 +432,7 @@ iblock_execute_zero_out(struct block_device *bdev, struct se_cmd *cmd)
 				target_to_linux_sector(dev, cmd->t_task_lba),
 				target_to_linux_sector(dev,
 					sbc_get_write_same_sectors(cmd)),
-				GFP_KERNEL, false);
+				GFP_KERNEL, BLKDEV_ZERO_NOUNMAP);
 	if (ret)
 		return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 12/50] RDMA/mlx5: Set GRH fields in query QP on RoCE

[Sasha Levin]

From: Aharon Landau <aharonl@mellanox.com>

[ Upstream commit 2d7e3ff7b6f2c614eb21d0dc348957a47eaffb57 ]

GRH fields such as sgid_index, hop limit, et. are set in the QP context
when QP is created/modified.

Currently, when query QP is performed, we fill the GRH fields only if the
GRH bit is set in the QP context, but this bit is not set for RoCE. Adjust
the check so we will set all relevant data for the RoCE too.

Since this data is returned to userspace, the below is an ABI regression.

Fixes: d8966fcd4c25 ("IB/core: Use rdma_ah_attr accessor functions")
Link: https://lore.kernel.org/r/20200413132028.930109-1-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/qp.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index 8fe149e808af1..245fef36ab4cb 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -5545,7 +5545,9 @@ static void to_rdma_ah_attr(struct mlx5_ib_dev *ibdev,
 	rdma_ah_set_path_bits(ah_attr, path->grh_mlid & 0x7f);
 	rdma_ah_set_static_rate(ah_attr,
 				path->static_rate ? path->static_rate - 5 : 0);
-	if (path->grh_mlid & (1 << 7)) {
+
+	if (path->grh_mlid & (1 << 7) ||
+	    ah_attr->type == RDMA_AH_ATTR_TYPE_ROCE) {
 		u32 tc_fl = be32_to_cpu(path->tclass_flowlabel);
 
 		rdma_ah_set_grh(ah_attr, NULL,
-- 
2.20.1

[PATCH AUTOSEL 5.6 13/50] RDMA/uverbs: Fix a race with disassociate and exit_mmap()

[Sasha Levin]

From: Jason Gunthorpe <jgg@mellanox.com>

[ Upstream commit 39c011a538272589b9eb02ff1228af528522a22c ]

If uverbs_user_mmap_disassociate() is called while the mmap is
concurrently doing exit_mmap then the ordering of the
rdma_user_mmap_entry_put() is not reliable.

The put must be done before uvers_user_mmap_disassociate() returns,
otherwise there can be a use after free on the ucontext, and a left over
entry in the xarray. If the put is not done here then it is done during
rdma_umap_close() later.

Add the missing put to the error exit path.

  WARNING: CPU: 7 PID: 7111 at drivers/infiniband/core/rdma_core.c:810 uverbs_destroy_ufile_hw+0x2a5/0x340 [ib_uverbs]
  Modules linked in: bonding ipip tunnel4 geneve ip6_udp_tunnel udp_tunnel ip6_gre ip6_tunnel tunnel6 ip_gre ip_tunnel gre mlx5_ib mlx5_core mlxfw pci_hyperv_intf act_ct nf_flow_table ptp pps_core rdma_ucm ib_uverbs ib_ipoib ib_umad 8021q garp mrp openvswitch nsh nf_conncount nfsv3 nfs_acl xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype iptable_filter xt_conntrack br_netfilter bridge stp llc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache overlay rpcrdma ib_isert iscsi_target_mod ib_iser kvm_intel ib_srpt iTCO_wdt target_core_mod iTCO_vendor_support kvm ib_srp nf_nat irqbypass crc32_pclmul crc32c_intel nf_conntrack rfkill nf_defrag_ipv6 virtio_net nf_defrag_ipv4 pcspkr ghash_clmulni_intel i2c_i801 net_failover failover i2c_core lpc_ich mfd_core rdma_cm ib_cm iw_cm button ib_core sunrpc sch_fq_codel ip_tables serio_raw [last unloaded: tunnel4]
  CPU: 7 PID: 7111 Comm: python3 Tainted: G        W         5.6.0-rc6-for-upstream-dbg-2020-03-21_06-41-26-18 #1
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  RIP: 0010:uverbs_destroy_ufile_hw+0x2a5/0x340 [ib_uverbs]
  Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 74 49 8b 84 24 08 01 00 00 48 85 c0 0f 84 13 ff ff ff 48 89 ef ff d0 e9 09 ff ff ff <0f> 0b e9 77 ff ff ff e8 0f d8 fa e0 e9 c5 fd ff ff e8 05 d8 fa e0
  RSP: 0018:ffff88840e0779a0 EFLAGS: 00010286
  RAX: dffffc0000000000 RBX: ffff8882a7721c00 RCX: 0000000000000000
  RDX: 1ffff11054ee469f RSI: ffffffff8446d7e0 RDI: ffff8882a77234f8
  RBP: ffff8882a7723400 R08: ffffed1085c0112c R09: 0000000000000001
  R10: 0000000000000001 R11: ffffed1085c0112b R12: ffff888403c30000
  R13: 0000000000000002 R14: ffff8882a7721cb0 R15: ffff8882a7721cd0
  FS:  00007f2046089700(0000) GS:ffff88842de00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f7cfe9a6e20 CR3: 000000040b8ac006 CR4: 0000000000360ee0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   ib_uverbs_remove_one+0x273/0x480 [ib_uverbs]
   ? up_write+0x15c/0x4a0
   remove_client_context+0xa6/0xf0 [ib_core]
   disable_device+0x12d/0x200 [ib_core]
   ? remove_client_context+0xf0/0xf0 [ib_core]
   ? mnt_get_count+0x1d0/0x1d0
   __ib_unregister_device+0x79/0x150 [ib_core]
   ib_unregister_device+0x21/0x30 [ib_core]
   __mlx5_ib_remove+0x91/0x110 [mlx5_ib]
   ? __mlx5_ib_remove+0x110/0x110 [mlx5_ib]
   mlx5_remove_device+0x241/0x310 [mlx5_core]
   mlx5_unregister_device+0x4d/0x1e0 [mlx5_core]
   mlx5_unload_one+0xc0/0x260 [mlx5_core]
   remove_one+0x5c/0x160 [mlx5_core]
   pci_device_remove+0xef/0x2a0
   ? pcibios_free_irq+0x10/0x10
   device_release_driver_internal+0x1d8/0x470
   unbind_store+0x152/0x200
   ? sysfs_kf_write+0x3b/0x180
   ? sysfs_file_ops+0x160/0x160
   kernfs_fop_write+0x284/0x460
   ? __sb_start_write+0x243/0x3a0
   vfs_write+0x197/0x4a0
   ksys_write+0x156/0x1e0
   ? __x64_sys_read+0xb0/0xb0
   ? do_syscall_64+0x73/0x1330
   ? do_syscall_64+0x73/0x1330
   do_syscall_64+0xe7/0x1330
   ? down_write_nested+0x3e0/0x3e0
   ? syscall_return_slowpath+0x970/0x970
   ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe
   ? lockdep_hardirqs_off+0x1de/0x2d0
   ? trace_hardirqs_off_thunk+0x1a/0x1c
   entry_SYSCALL_64_after_hwframe+0x49/0xbe
  RIP: 0033:0x7f20a3ff0cdb
  Code: 53 48 89 d5 48 89 f3 48 83 ec 18 48 89 7c 24 08 e8 5a fd ff ff 48 89 ea 41 89 c0 48 89 de 48 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 90 fd ff ff 48
  RSP: 002b:00007f2046087040 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 00007f2038016df0 RCX: 00007f20a3ff0cdb
  RDX: 000000000000000d RSI: 00007f2038016df0 RDI: 0000000000000018
  RBP: 000000000000000d R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000100 R11: 0000000000000293 R12: 00007f2046e29630
  R13: 00007f20280035a0 R14: 0000000000000018 R15: 00007f2038016df0

Fixes: c043ff2cfb7f ("RDMA: Connect between the mmap entry and the umap_priv structure")
Link: https://lore.kernel.org/r/20200413132136.930388-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/uverbs_main.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index 2d4083bf4a048..17fc25db03114 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -820,6 +820,10 @@ void uverbs_user_mmap_disassociate(struct ib_uverbs_file *ufile)
 			ret = mmget_not_zero(mm);
 			if (!ret) {
 				list_del_init(&priv->list);
+				if (priv->entry) {
+					rdma_user_mmap_entry_put(priv->entry);
+					priv->entry = NULL;
+				}
 				mm = NULL;
 				continue;
 			}
-- 
2.20.1

[PATCH AUTOSEL 5.6 14/50] RDMA/core: Prevent mixed use of FDs between shared ufiles

[Sasha Levin]

From: Leon Romanovsky <leonro@mellanox.com>

[ Upstream commit 0fb00941dc63990a10951146df216fc7b0e20bc2 ]

FDs can only be used on the ufile that created them, they cannot be mixed
to other ufiles. We are lacking a check to prevent it.

  BUG: KASAN: null-ptr-deref in atomic64_sub_and_test include/asm-generic/atomic-instrumented.h:1547 [inline]
  BUG: KASAN: null-ptr-deref in atomic_long_sub_and_test include/asm-generic/atomic-long.h:460 [inline]
  BUG: KASAN: null-ptr-deref in fput_many+0x1a/0x140 fs/file_table.c:336
  Write of size 8 at addr 0000000000000038 by task syz-executor179/284

  CPU: 0 PID: 284 Comm: syz-executor179 Not tainted 5.5.0-rc5+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x94/0xce lib/dump_stack.c:118
   __kasan_report+0x18f/0x1b7 mm/kasan/report.c:510
   kasan_report+0xe/0x20 mm/kasan/common.c:639
   check_memory_region_inline mm/kasan/generic.c:185 [inline]
   check_memory_region+0x15d/0x1b0 mm/kasan/generic.c:192
   atomic64_sub_and_test include/asm-generic/atomic-instrumented.h:1547 [inline]
   atomic_long_sub_and_test include/asm-generic/atomic-long.h:460 [inline]
   fput_many+0x1a/0x140 fs/file_table.c:336
   rdma_lookup_put_uobject+0x85/0x130 drivers/infiniband/core/rdma_core.c:692
   uobj_put_read include/rdma/uverbs_std_types.h:96 [inline]
   _ib_uverbs_lookup_comp_file drivers/infiniband/core/uverbs_cmd.c:198 [inline]
   create_cq+0x375/0xba0 drivers/infiniband/core/uverbs_cmd.c:1006
   ib_uverbs_create_cq+0x114/0x140 drivers/infiniband/core/uverbs_cmd.c:1089
   ib_uverbs_write+0xaa5/0xdf0 drivers/infiniband/core/uverbs_main.c:769
   __vfs_write+0x7c/0x100 fs/read_write.c:494
   vfs_write+0x168/0x4a0 fs/read_write.c:558
   ksys_write+0xc8/0x200 fs/read_write.c:611
   do_syscall_64+0x9c/0x390 arch/x86/entry/common.c:294
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x44ef99
  Code: 00 b8 00 01 00 00 eb e1 e8 74 1c 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c4 ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007ffc0b74c028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 00007ffc0b74c030 RCX: 000000000044ef99
  RDX: 0000000000000040 RSI: 0000000020000040 RDI: 0000000000000005
  RBP: 00007ffc0b74c038 R08: 0000000000401830 R09: 0000000000401830
  R10: 00007ffc0b74c038 R11: 0000000000000246 R12: 0000000000000000
  R13: 0000000000000000 R14: 00000000006be018 R15: 0000000000000000

Fixes: cf8966b3477d ("IB/core: Add support for fd objects")
Link: https://lore.kernel.org/r/20200421082929.311931-2-leon@kernel.org
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/rdma_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/rdma_core.c b/drivers/infiniband/core/rdma_core.c
index 5128cb16bb485..8f480de5596a2 100644
--- a/drivers/infiniband/core/rdma_core.c
+++ b/drivers/infiniband/core/rdma_core.c
@@ -360,7 +360,7 @@ lookup_get_fd_uobject(const struct uverbs_api_object *obj,
 	 * uverbs_uobject_fd_release(), and the caller is expected to ensure
 	 * that release is never done while a call to lookup is possible.
 	 */
-	if (f->f_op != fd_type->fops) {
+	if (f->f_op != fd_type->fops || uobject->ufile != ufile) {
 		fput(f);
 		return ERR_PTR(-EBADF);
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.6 15/50] RDMA/core: Fix overwriting of uobj in case of error

[Sasha Levin]

From: Leon Romanovsky <leonro@mellanox.com>

[ Upstream commit 83a2670212215a569ed133efc10c92055c96cc8c ]

In case of failure to get file, the uobj is overwritten and causes to
supply bad pointer as an input to uverbs_uobject_put().

  BUG: KASAN: null-ptr-deref in atomic_fetch_sub include/asm-generic/atomic-instrumented.h:199 [inline]
  BUG: KASAN: null-ptr-deref in refcount_sub_and_test include/linux/refcount.h:253 [inline]
  BUG: KASAN: null-ptr-deref in refcount_dec_and_test include/linux/refcount.h:281 [inline]
  BUG: KASAN: null-ptr-deref in kref_put include/linux/kref.h:64 [inline]
  BUG: KASAN: null-ptr-deref in uverbs_uobject_put+0x22/0x90 drivers/infiniband/core/rdma_core.c:57
  Write of size 4 at addr 0000000000000030 by task syz-executor.4/1691

  CPU: 1 PID: 1691 Comm: syz-executor.4 Not tainted 5.6.0 #17
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  Call Trace:
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x94/0xce lib/dump_stack.c:118
   __kasan_report+0x10c/0x190 mm/kasan/report.c:515
   kasan_report+0x32/0x50 mm/kasan/common.c:625
   check_memory_region_inline mm/kasan/generic.c:187 [inline]
   check_memory_region+0x16d/0x1c0 mm/kasan/generic.c:193
   atomic_fetch_sub include/asm-generic/atomic-instrumented.h:199 [inline]
   refcount_sub_and_test include/linux/refcount.h:253 [inline]
   refcount_dec_and_test include/linux/refcount.h:281 [inline]
   kref_put include/linux/kref.h:64 [inline]
   uverbs_uobject_put+0x22/0x90 drivers/infiniband/core/rdma_core.c:57
   alloc_begin_fd_uobject+0x1d0/0x250 drivers/infiniband/core/rdma_core.c:486
   rdma_alloc_begin_uobject+0xa8/0xf0 drivers/infiniband/core/rdma_core.c:509
   __uobj_alloc include/rdma/uverbs_std_types.h:117 [inline]
   ib_uverbs_create_comp_channel+0x16d/0x230 drivers/infiniband/core/uverbs_cmd.c:982
   ib_uverbs_write+0xaa5/0xdf0 drivers/infiniband/core/uverbs_main.c:665
   __vfs_write+0x7c/0x100 fs/read_write.c:494
   vfs_write+0x168/0x4a0 fs/read_write.c:558
   ksys_write+0xc8/0x200 fs/read_write.c:611
   do_syscall_64+0x9c/0x390 arch/x86/entry/common.c:295
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x466479
  Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007efe9f6a7c48 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
  RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000466479
  RDX: 0000000000000018 RSI: 0000000020000040 RDI: 0000000000000003
  RBP: 00007efe9f6a86bc R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000005
  R13: 0000000000000bf2 R14: 00000000004cb80a R15: 00000000006fefc0

Fixes: 849e149063bd ("RDMA/core: Do not allow alloc_commit to fail")
Link: https://lore.kernel.org/r/20200421082929.311931-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/rdma_core.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/infiniband/core/rdma_core.c b/drivers/infiniband/core/rdma_core.c
index 8f480de5596a2..2947f4f83561d 100644
--- a/drivers/infiniband/core/rdma_core.c
+++ b/drivers/infiniband/core/rdma_core.c
@@ -474,16 +474,15 @@ alloc_begin_fd_uobject(const struct uverbs_api_object *obj,
 	filp = anon_inode_getfile(fd_type->name, fd_type->fops, NULL,
 				  fd_type->flags);
 	if (IS_ERR(filp)) {
+		uverbs_uobject_put(uobj);
 		uobj = ERR_CAST(filp);
-		goto err_uobj;
+		goto err_fd;
 	}
 	uobj->object = filp;
 
 	uobj->id = new_fd;
 	return uobj;
 
-err_uobj:
-	uverbs_uobject_put(uobj);
 err_fd:
 	put_unused_fd(new_fd);
 	return uobj;
-- 
2.20.1

[PATCH AUTOSEL 5.6 16/50] dmaengine: pch_dma.c: Avoid data race between probe and irq handler

[Sasha Levin]

From: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>

[ Upstream commit 2e45676a4d33af47259fa186ea039122ce263ba9 ]

pd->dma.dev is read in irq handler pd_irq().
However, it is set to pdev->dev after request_irq().
Therefore, set pd->dma.dev to pdev->dev before request_irq() to
avoid data race between pch_dma_probe() and pd_irq().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Link: https://lore.kernel.org/r/20200416062335.29223-1-madhuparnabhowmik10@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/pch_dma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index 581e7a290d98e..a3b0b4c56a190 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -865,6 +865,7 @@ static int pch_dma_probe(struct pci_dev *pdev,
 	}
 
 	pci_set_master(pdev);
+	pd->dma.dev = &pdev->dev;
 
 	err = request_irq(pdev->irq, pd_irq, IRQF_SHARED, DRV_NAME, pd);
 	if (err) {
@@ -880,7 +881,6 @@ static int pch_dma_probe(struct pci_dev *pdev,
 		goto err_free_irq;
 	}
 
-	pd->dma.dev = &pdev->dev;
 
 	INIT_LIST_HEAD(&pd->dma.channels);
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 17/50] dmaengine: mmp_tdma: Do not ignore slave config validation errors

[Sasha Levin]

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 363c32701c7fdc8265a84b21a6a4f45d1202b9ca ]

With an invalid dma_slave_config set previously,
mmp_tdma_prep_dma_cyclic() would detect an error whilst configuring the
channel, but proceed happily on:

  [  120.756530] mmp-tdma d42a0800.adma: mmp_tdma: unknown burst size.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-2-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/mmp_tdma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/mmp_tdma.c b/drivers/dma/mmp_tdma.c
index 10117f271b12b..51e08c16756ae 100644
--- a/drivers/dma/mmp_tdma.c
+++ b/drivers/dma/mmp_tdma.c
@@ -443,7 +443,8 @@ static struct dma_async_tx_descriptor *mmp_tdma_prep_dma_cyclic(
 	if (!desc)
 		goto err_out;
 
-	mmp_tdma_config_write(chan, direction, &tdmac->slave_config);
+	if (mmp_tdma_config_write(chan, direction, &tdmac->slave_config))
+		goto err_out;
 
 	while (buf < buf_len) {
 		desc = &tdmac->desc_arr[i];
-- 
2.20.1

[PATCH AUTOSEL 5.6 18/50] dmaengine: mmp_tdma: Reset channel error on release

[Sasha Levin]

From: Lubomir Rintel <lkundrak@v3.sk>

[ Upstream commit 0c89446379218698189a47871336cb30286a7197 ]

When a channel configuration fails, the status of the channel is set to
DEV_ERROR so that an attempt to submit it fails. However, this status
sticks until the heat end of the universe, making it impossible to
recover from the error.

Let's reset it when the channel is released so that further use of the
channel with correct configuration is not impacted.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://lore.kernel.org/r/20200419164912.670973-5-lkundrak@v3.sk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/mmp_tdma.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/dma/mmp_tdma.c b/drivers/dma/mmp_tdma.c
index 51e08c16756ae..d683232d7fea0 100644
--- a/drivers/dma/mmp_tdma.c
+++ b/drivers/dma/mmp_tdma.c
@@ -363,6 +363,8 @@ static void mmp_tdma_free_descriptor(struct mmp_tdma_chan *tdmac)
 		gen_pool_free(gpool, (unsigned long)tdmac->desc_arr,
 				size);
 	tdmac->desc_arr = NULL;
+	if (tdmac->status == DMA_ERROR)
+		tdmac->status = DMA_COMPLETE;
 
 	return;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 19/50] vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()

[Sasha Levin]

From: Sean Christopherson <sean.j.christopherson@intel.com>

[ Upstream commit 5cbf3264bc715e9eb384e2b68601f8c02bb9a61d ]

Use follow_pfn() to get the PFN of a PFNMAP VMA instead of assuming that
vma->vm_pgoff holds the base PFN of the VMA.  This fixes a bug where
attempting to do VFIO_IOMMU_MAP_DMA on an arbitrary PFNMAP'd region of
memory calculates garbage for the PFN.

Hilariously, this only got detected because the first "PFN" calculated
by vaddr_get_pfn() is PFN 0 (vma->vm_pgoff==0), and iommu_iova_to_phys()
uses PA==0 as an error, which triggers a WARN in vfio_unmap_unpin()
because the translation "failed".  PFN 0 is now unconditionally reserved
on x86 in order to mitigate L1TF, which causes is_invalid_reserved_pfn()
to return true and in turns results in vaddr_get_pfn() returning success
for PFN 0.  Eventually the bogus calculation runs into PFNs that aren't
reserved and leads to failure in vfio_pin_map_dma().  The subsequent
call to vfio_remove_dma() attempts to unmap PFN 0 and WARNs.

  WARNING: CPU: 8 PID: 5130 at drivers/vfio/vfio_iommu_type1.c:750 vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1]
  Modules linked in: vfio_pci vfio_virqfd vfio_iommu_type1 vfio ...
  CPU: 8 PID: 5130 Comm: sgx Tainted: G        W         5.6.0-rc5-705d787c7fee-vfio+ #3
  Hardware name: Intel Corporation Mehlow UP Server Platform/Moss Beach Server, BIOS CNLSE2R1.D00.X119.B49.1803010910 03/01/2018
  RIP: 0010:vfio_unmap_unpin+0x2e1/0x310 [vfio_iommu_type1]
  Code: <0f> 0b 49 81 c5 00 10 00 00 e9 c5 fe ff ff bb 00 10 00 00 e9 3d fe
  RSP: 0018:ffffbeb5039ebda8 EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff9a55cbf8d480 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff9a52b771c200
  RBP: 0000000000000000 R08: 0000000000000040 R09: 00000000fffffff2
  R10: 0000000000000001 R11: ffff9a51fa896000 R12: 0000000184010000
  R13: 0000000184000000 R14: 0000000000010000 R15: ffff9a55cb66ea08
  FS:  00007f15d3830b40(0000) GS:ffff9a55d5600000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000561cf39429e0 CR3: 000000084f75f005 CR4: 00000000003626e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   vfio_remove_dma+0x17/0x70 [vfio_iommu_type1]
   vfio_iommu_type1_ioctl+0x9e3/0xa7b [vfio_iommu_type1]
   ksys_ioctl+0x92/0xb0
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x4c/0x180
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f15d04c75d7
  Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48

Fixes: 73fa0d10d077 ("vfio: Type1 IOMMU implementation")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/vfio_iommu_type1.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c
index ec9be79ba2d79..4315facf0243a 100644
--- a/drivers/vfio/vfio_iommu_type1.c
+++ b/drivers/vfio/vfio_iommu_type1.c
@@ -341,8 +341,8 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr,
 	vma = find_vma_intersection(mm, vaddr, vaddr + 1);
 
 	if (vma && vma->vm_flags & VM_PFNMAP) {
-		*pfn = ((vaddr - vma->vm_start) >> PAGE_SHIFT) + vma->vm_pgoff;
-		if (is_invalid_reserved_pfn(*pfn))
+		if (!follow_pfn(vma, vaddr, pfn) &&
+		    is_invalid_reserved_pfn(*pfn))
 			ret = 0;
 	}
 done:
-- 
2.20.1

[PATCH AUTOSEL 5.6 20/50] ALSA: hda: Match both PCI ID and SSID for driver blacklist

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 977dfef40c8996b69afe23a9094d184049efb7bb ]

The commit 3c6fd1f07ed0 ("ALSA: hda: Add driver blacklist") added a
new blacklist for the devices that are known to have empty codecs, and
one of the entries was ASUS ROG Zenith II (PCI SSID 1043:874f).
However, it turned out that the very same PCI SSID is used for the
previous model that does have the valid HD-audio codecs and the change
broke the sound on it.

Since the empty codec problem appear on the certain AMD platform (PCI
ID 1022:1487), this patch changes the blacklist matching to both PCI
ID and SSID using pci_match_id().  Also, the entry that was removed by
the previous fix for ASUS ROG Zenigh II is re-added.

Link: https://lore.kernel.org/r/20200424061222.19792-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 59b60b1f26f80..8b015b27e9c73 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2075,9 +2075,10 @@ static void pcm_mmap_prepare(struct snd_pcm_substream *substream,
  * some HD-audio PCI entries are exposed without any codecs, and such devices
  * should be ignored from the beginning.
  */
-static const struct snd_pci_quirk driver_blacklist[] = {
-	SND_PCI_QUIRK(0x1462, 0xcb59, "MSI TRX40 Creator", 0),
-	SND_PCI_QUIRK(0x1462, 0xcb60, "MSI TRX40", 0),
+static const struct pci_device_id driver_blacklist[] = {
+	{ PCI_DEVICE_SUB(0x1022, 0x1487, 0x1043, 0x874f) }, /* ASUS ROG Zenith II / Strix */
+	{ PCI_DEVICE_SUB(0x1022, 0x1487, 0x1462, 0xcb59) }, /* MSI TRX40 Creator */
+	{ PCI_DEVICE_SUB(0x1022, 0x1487, 0x1462, 0xcb60) }, /* MSI TRX40 */
 	{}
 };
 
@@ -2097,7 +2098,7 @@ static int azx_probe(struct pci_dev *pci,
 	bool schedule_probe;
 	int err;
 
-	if (snd_pci_quirk_lookup(pci, driver_blacklist)) {
+	if (pci_match_id(driver_blacklist, pci)) {
 		dev_info(&pci->dev, "Skipping the blacklisted device\n");
 		return -ENODEV;
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.6 21/50] drm/amd/display: blank dp stream before re-train the link

[Sasha Levin]

From: Xiaodong Yan <Xiaodong.Yan@amd.com>

[ Upstream commit 718a5569b6fa6e1f49f1ae76a3c18acb4ddb74f1 ]

[Why]
When link loss happened, monitor can not light up if only re-train the
link.

[How]
Blank all the DP streams on this link before re-train the link, and then
unblank the stream

Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index fd9e69634c50a..1b6c75a4dd60a 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -2885,6 +2885,12 @@ bool dc_link_handle_hpd_rx_irq(struct dc_link *link, union hpd_irq_data *out_hpd
 					sizeof(hpd_irq_dpcd_data),
 					"Status: ");
 
+		for (i = 0; i < MAX_PIPES; i++) {
+			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
+			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
+				link->dc->hwss.blank_stream(pipe_ctx);
+		}
+
 		for (i = 0; i < MAX_PIPES; i++) {
 			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
 			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
@@ -2904,6 +2910,12 @@ bool dc_link_handle_hpd_rx_irq(struct dc_link *link, union hpd_irq_data *out_hpd
 		if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST)
 			dc_link_reallocate_mst_payload(link);
 
+		for (i = 0; i < MAX_PIPES; i++) {
+			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
+			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
+				link->dc->hwss.unblank_stream(pipe_ctx, &previous_link_settings);
+		}
+
 		status = false;
 		if (out_link_loss)
 			*out_link_loss = true;
-- 
2.20.1

[PATCH AUTOSEL 5.6 21/50] drm/amd/display: blank dp stream before re-train the link

[Sasha Levin]

From: Xiaodong Yan <Xiaodong.Yan@amd.com>

[ Upstream commit 718a5569b6fa6e1f49f1ae76a3c18acb4ddb74f1 ]

[Why]
When link loss happened, monitor can not light up if only re-train the
link.

[How]
Blank all the DP streams on this link before re-train the link, and then
unblank the stream

Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index fd9e69634c50a..1b6c75a4dd60a 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -2885,6 +2885,12 @@ bool dc_link_handle_hpd_rx_irq(struct dc_link *link, union hpd_irq_data *out_hpd
 					sizeof(hpd_irq_dpcd_data),
 					"Status: ");
 
+		for (i = 0; i < MAX_PIPES; i++) {
+			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
+			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
+				link->dc->hwss.blank_stream(pipe_ctx);
+		}
+
 		for (i = 0; i < MAX_PIPES; i++) {
 			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
 			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
@@ -2904,6 +2910,12 @@ bool dc_link_handle_hpd_rx_irq(struct dc_link *link, union hpd_irq_data *out_hpd
 		if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST)
 			dc_link_reallocate_mst_payload(link);
 
+		for (i = 0; i < MAX_PIPES; i++) {
+			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
+			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
+				link->dc->hwss.unblank_stream(pipe_ctx, &previous_link_settings);
+		}
+
 		status = false;
 		if (out_link_loss)
 			*out_link_loss = true;
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.6 21/50] drm/amd/display: blank dp stream before re-train the link

[Sasha Levin]

From: Xiaodong Yan <Xiaodong.Yan@amd.com>

[ Upstream commit 718a5569b6fa6e1f49f1ae76a3c18acb4ddb74f1 ]

[Why]
When link loss happened, monitor can not light up if only re-train the
link.

[How]
Blank all the DP streams on this link before re-train the link, and then
unblank the stream

Signed-off-by: Xiaodong Yan <Xiaodong.Yan@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index fd9e69634c50a..1b6c75a4dd60a 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -2885,6 +2885,12 @@ bool dc_link_handle_hpd_rx_irq(struct dc_link *link, union hpd_irq_data *out_hpd
 					sizeof(hpd_irq_dpcd_data),
 					"Status: ");
 
+		for (i = 0; i < MAX_PIPES; i++) {
+			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
+			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
+				link->dc->hwss.blank_stream(pipe_ctx);
+		}
+
 		for (i = 0; i < MAX_PIPES; i++) {
 			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
 			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
@@ -2904,6 +2910,12 @@ bool dc_link_handle_hpd_rx_irq(struct dc_link *link, union hpd_irq_data *out_hpd
 		if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST)
 			dc_link_reallocate_mst_payload(link);
 
+		for (i = 0; i < MAX_PIPES; i++) {
+			pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
+			if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link)
+				link->dc->hwss.unblank_stream(pipe_ctx, &previous_link_settings);
+		}
+
 		status = false;
 		if (out_link_loss)
 			*out_link_loss = true;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 22/50] selftests/ftrace: Check the first record for kprobe_args_type.tc

[Sasha Levin]

From: Xiao Yang <yangx.jy@cn.fujitsu.com>

[ Upstream commit f0c0d0cf590f71b2213b29a7ded2cde3d0a1a0ba ]

It is possible to get multiple records from trace during test and then more
than 4 arguments are assigned to ARGS.  This situation results in the failure
of kprobe_args_type.tc.  For example:
-----------------------------------------------------------
grep testprobe trace
   ftracetest-5902  [001] d... 111195.682227: testprobe: (_do_fork+0x0/0x460) arg1=334823024 arg2=334823024 arg3=0x13f4fe70 arg4=7
     pmlogger-5949  [000] d... 111195.709898: testprobe: (_do_fork+0x0/0x460) arg1=345308784 arg2=345308784 arg3=0x1494fe70 arg4=7
 grep testprobe trace
 sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'
ARGS='334823024 334823024 0x13f4fe70 7
345308784 345308784 0x1494fe70 7'
-----------------------------------------------------------

We don't care which process calls do_fork so just check the first record to
fix the issue.

Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc  | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
index 1bcb67dcae267..81490ecaaa927 100644
--- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
+++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_args_type.tc
@@ -38,7 +38,7 @@ for width in 64 32 16 8; do
   echo 0 > events/kprobes/testprobe/enable
 
   : "Confirm the arguments is recorded in given types correctly"
-  ARGS=`grep "testprobe" trace | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
+  ARGS=`grep "testprobe" trace | head -n 1 | sed -e 's/.* arg1=\(.*\) arg2=\(.*\) arg3=\(.*\) arg4=\(.*\)/\1 \2 \3 \4/'`
   check_types $ARGS $width
 
   : "Clear event for next loop"
-- 
2.20.1

[PATCH AUTOSEL 5.6 23/50] RDMA/core: Fix race between destroy and release FD object

[Sasha Levin]

From: Leon Romanovsky <leonro@mellanox.com>

[ Upstream commit f0abc761bbb9418876cc4d1ebc473e4ea6352e42 ]

The call to ->lookup_put() was too early and it caused an unlock of the
read/write protection of the uobject after the FD was put. This allows a
race:

     CPU1                                 CPU2
 rdma_lookup_put_uobject()
   lookup_put_fd_uobject()
     fput()
				   fput()
				     uverbs_uobject_fd_release()
				       WARN_ON(uverbs_try_lock_object(uobj,
					       UVERBS_LOOKUP_WRITE));
   atomic_dec(usecnt)

Fix the code by changing the order, first unlock and call to
->lookup_put() after that.

Fixes: 3832125624b7 ("IB/core: Add support for idr types")
Link: https://lore.kernel.org/r/20200423060122.6182-1-leon@kernel.org
Suggested-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/rdma_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/rdma_core.c b/drivers/infiniband/core/rdma_core.c
index 2947f4f83561d..177333d8bcdae 100644
--- a/drivers/infiniband/core/rdma_core.c
+++ b/drivers/infiniband/core/rdma_core.c
@@ -678,7 +678,6 @@ void rdma_lookup_put_uobject(struct ib_uobject *uobj,
 			     enum rdma_lookup_mode mode)
 {
 	assert_uverbs_usecnt(uobj, mode);
-	uobj->uapi_object->type_class->lookup_put(uobj, mode);
 	/*
 	 * In order to unlock an object, either decrease its usecnt for
 	 * read access or zero it in case of exclusive access. See
@@ -695,6 +694,7 @@ void rdma_lookup_put_uobject(struct ib_uobject *uobj,
 		break;
 	}
 
+	uobj->uapi_object->type_class->lookup_put(uobj, mode);
 	/* Pairs with the kref obtained by type->lookup_get */
 	uverbs_uobject_put(uobj);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 24/50] cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once

[Sasha Levin]

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit 8c539776ac83c0857395e1ccc9c6b516521a2d32 ]

Make a note of the first time we discover the turbo mode has been
disabled by the BIOS, as otherwise we complain every time we try to
update the mode.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/intel_pstate.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index c81e1ff290697..b4c014464a208 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -1058,7 +1058,7 @@ static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b,
 
 	update_turbo_state();
 	if (global.turbo_disabled) {
-		pr_warn("Turbo disabled by BIOS or unavailable on processor\n");
+		pr_notice_once("Turbo disabled by BIOS or unavailable on processor\n");
 		mutex_unlock(&intel_pstate_limits_lock);
 		mutex_unlock(&intel_pstate_driver_lock);
 		return -EPERM;
-- 
2.20.1

[PATCH AUTOSEL 5.6 25/50] dma-buf: Fix SET_NAME ioctl uapi

[Sasha Levin]

From: Daniel Vetter <daniel.vetter@intel.com>

[ Upstream commit a5bff92eaac45bdf6221badf9505c26792fdf99e ]

The uapi is the same on 32 and 64 bit, but the number isn't. Everyone
who botched this please re-read:

https://www.kernel.org/doc/html/v5.4-preprc-cpu/ioctl/botching-up-ioctls.html

Also, the type argument for the ioctl macros is for the type the void
__user *arg pointer points at, which in this case would be the
variable-sized char[] of a 0 terminated string. So this was botched in
more than just the usual ways.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: minchan@kernel.org
Cc: surenb@google.com
Cc: jenhaochen@google.com
Cc: Martin Liu <liumartin@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Martin Liu <liumartin@google.com>
Reviewed-by: Martin Liu <liumartin@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
  [sumits: updated some checkpatch fixes, corrected author email]
Link: https://patchwork.freedesktop.org/patch/msgid/20200407133002.3486387-1-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma-buf/dma-buf.c    | 3 ++-
 include/uapi/linux/dma-buf.h | 6 ++++++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
index c343c7c10b4cc..e7589d91de8fb 100644
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -388,7 +388,8 @@ static long dma_buf_ioctl(struct file *file,
 
 		return ret;
 
-	case DMA_BUF_SET_NAME:
+	case DMA_BUF_SET_NAME_A:
+	case DMA_BUF_SET_NAME_B:
 		return dma_buf_set_name(dmabuf, (const char __user *)arg);
 
 	default:
diff --git a/include/uapi/linux/dma-buf.h b/include/uapi/linux/dma-buf.h
index dbc7092e04b5a..7f30393b92c3b 100644
--- a/include/uapi/linux/dma-buf.h
+++ b/include/uapi/linux/dma-buf.h
@@ -39,6 +39,12 @@ struct dma_buf_sync {
 
 #define DMA_BUF_BASE		'b'
 #define DMA_BUF_IOCTL_SYNC	_IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)
+
+/* 32/64bitness of this uapi was botched in android, there's no difference
+ * between them in actual uapi, they're just different numbers.
+ */
 #define DMA_BUF_SET_NAME	_IOW(DMA_BUF_BASE, 1, const char *)
+#define DMA_BUF_SET_NAME_A	_IOW(DMA_BUF_BASE, 1, u32)
+#define DMA_BUF_SET_NAME_B	_IOW(DMA_BUF_BASE, 1, u64)
 
 #endif
-- 
2.20.1

[PATCH AUTOSEL 5.6 25/50] dma-buf: Fix SET_NAME ioctl uapi

[Sasha Levin]

From: Daniel Vetter <daniel.vetter@intel.com>

[ Upstream commit a5bff92eaac45bdf6221badf9505c26792fdf99e ]

The uapi is the same on 32 and 64 bit, but the number isn't. Everyone
who botched this please re-read:

https://www.kernel.org/doc/html/v5.4-preprc-cpu/ioctl/botching-up-ioctls.html

Also, the type argument for the ioctl macros is for the type the void
__user *arg pointer points at, which in this case would be the
variable-sized char[] of a 0 terminated string. So this was botched in
more than just the usual ways.

Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: minchan@kernel.org
Cc: surenb@google.com
Cc: jenhaochen@google.com
Cc: Martin Liu <liumartin@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Martin Liu <liumartin@google.com>
Reviewed-by: Martin Liu <liumartin@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
  [sumits: updated some checkpatch fixes, corrected author email]
Link: https://patchwork.freedesktop.org/patch/msgid/20200407133002.3486387-1-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma-buf/dma-buf.c    | 3 ++-
 include/uapi/linux/dma-buf.h | 6 ++++++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c
index c343c7c10b4cc..e7589d91de8fb 100644
--- a/drivers/dma-buf/dma-buf.c
+++ b/drivers/dma-buf/dma-buf.c
@@ -388,7 +388,8 @@ static long dma_buf_ioctl(struct file *file,
 
 		return ret;
 
-	case DMA_BUF_SET_NAME:
+	case DMA_BUF_SET_NAME_A:
+	case DMA_BUF_SET_NAME_B:
 		return dma_buf_set_name(dmabuf, (const char __user *)arg);
 
 	default:
diff --git a/include/uapi/linux/dma-buf.h b/include/uapi/linux/dma-buf.h
index dbc7092e04b5a..7f30393b92c3b 100644
--- a/include/uapi/linux/dma-buf.h
+++ b/include/uapi/linux/dma-buf.h
@@ -39,6 +39,12 @@ struct dma_buf_sync {
 
 #define DMA_BUF_BASE		'b'
 #define DMA_BUF_IOCTL_SYNC	_IOW(DMA_BUF_BASE, 0, struct dma_buf_sync)
+
+/* 32/64bitness of this uapi was botched in android, there's no difference
+ * between them in actual uapi, they're just different numbers.
+ */
 #define DMA_BUF_SET_NAME	_IOW(DMA_BUF_BASE, 1, const char *)
+#define DMA_BUF_SET_NAME_A	_IOW(DMA_BUF_BASE, 1, u32)
+#define DMA_BUF_SET_NAME_B	_IOW(DMA_BUF_BASE, 1, u64)
 
 #endif
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 26/50] nvme: prevent double free in nvme_alloc_ns() error handling

[Sasha Levin]

From: Niklas Cassel <niklas.cassel@wdc.com>

[ Upstream commit 132be62387c7a72a38872676c18b0dfae264adb8 ]

When jumping to the out_put_disk label, we will call put_disk(), which will
trigger a call to disk_release(), which calls blk_put_queue().

Later in the cleanup code, we do blk_cleanup_queue(), which will also call
blk_put_queue().

Putting the queue twice is incorrect, and will generate a KASAN splat.

Set the disk->queue pointer to NULL, before calling put_disk(), so that the
first call to blk_put_queue() will not free the queue.

The second call to blk_put_queue() uses another pointer to the same queue,
so this call will still free the queue.

Fixes: 85136c010285 ("lightnvm: simplify geometry enumeration")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 652ca87dac949..fb4c35a430650 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3580,6 +3580,8 @@ static int nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid)
 
 	return 0;
  out_put_disk:
+	/* prevent double queue cleanup */
+	ns->disk->queue = NULL;
 	put_disk(ns->disk);
  out_unlink_ns:
 	mutex_lock(&ctrl->subsys->lock);
-- 
2.20.1

[PATCH AUTOSEL 5.6 26/50] nvme: prevent double free in nvme_alloc_ns() error handling

[Sasha Levin]

From: Niklas Cassel <niklas.cassel@wdc.com>

[ Upstream commit 132be62387c7a72a38872676c18b0dfae264adb8 ]

When jumping to the out_put_disk label, we will call put_disk(), which will
trigger a call to disk_release(), which calls blk_put_queue().

Later in the cleanup code, we do blk_cleanup_queue(), which will also call
blk_put_queue().

Putting the queue twice is incorrect, and will generate a KASAN splat.

Set the disk->queue pointer to NULL, before calling put_disk(), so that the
first call to blk_put_queue() will not free the queue.

The second call to blk_put_queue() uses another pointer to the same queue,
so this call will still free the queue.

Fixes: 85136c010285 ("lightnvm: simplify geometry enumeration")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/core.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 652ca87dac949..fb4c35a430650 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -3580,6 +3580,8 @@ static int nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid)
 
 	return 0;
  out_put_disk:
+	/* prevent double queue cleanup */
+	ns->disk->queue = NULL;
 	put_disk(ns->disk);
  out_unlink_ns:
 	mutex_lock(&ctrl->subsys->lock);
-- 
2.20.1


_______________________________________________
linux-nvme mailing list
linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme

[PATCH AUTOSEL 5.6 27/50] dmaengine: fix channel index enumeration

[Sasha Levin]

From: Dave Jiang <dave.jiang@intel.com>

[ Upstream commit 0821009445a8261ac4d32a6df4b83938e007c765 ]

When the channel register code was changed to allow hotplug operations,
dynamic indexing wasn't taken into account. When channels are randomly
plugged and unplugged out of order, the serial indexing breaks. Convert
channel indexing to using IDA tracking in order to allow dynamic
assignment. The previous code does not cause any regression bug for
existing channel allocation besides idxd driver since the hotplug usage
case is only used by idxd at this point.

With this change, the chan->idr_ref is also not needed any longer. We can
have a device with no channels registered due to hot plug. The channel
device release code no longer should attempt to free the dma device id on
the last channel release.

Fixes: e81274cd6b52 ("dmaengine: add support to dynamic register/unregister of channels")

Reported-by: Yixin Zhang <yixin.zhang@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Yixin Zhang <yixin.zhang@intel.com>
Link: https://lore.kernel.org/r/158679961260.7674.8485924270472851852.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dmaengine.c   | 60 +++++++++++++++++----------------------
 include/linux/dmaengine.h |  4 +--
 2 files changed, 28 insertions(+), 36 deletions(-)

diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 17909fd1820ff..b5c4926aa76e1 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -151,10 +151,6 @@ static void chan_dev_release(struct device *dev)
 	struct dma_chan_dev *chan_dev;
 
 	chan_dev = container_of(dev, typeof(*chan_dev), device);
-	if (atomic_dec_and_test(chan_dev->idr_ref)) {
-		ida_free(&dma_ida, chan_dev->dev_id);
-		kfree(chan_dev->idr_ref);
-	}
 	kfree(chan_dev);
 }
 
@@ -952,27 +948,9 @@ static int get_dma_id(struct dma_device *device)
 }
 
 static int __dma_async_device_channel_register(struct dma_device *device,
-					       struct dma_chan *chan,
-					       int chan_id)
+					       struct dma_chan *chan)
 {
 	int rc = 0;
-	int chancnt = device->chancnt;
-	atomic_t *idr_ref;
-	struct dma_chan *tchan;
-
-	tchan = list_first_entry_or_null(&device->channels,
-					 struct dma_chan, device_node);
-	if (!tchan)
-		return -ENODEV;
-
-	if (tchan->dev) {
-		idr_ref = tchan->dev->idr_ref;
-	} else {
-		idr_ref = kmalloc(sizeof(*idr_ref), GFP_KERNEL);
-		if (!idr_ref)
-			return -ENOMEM;
-		atomic_set(idr_ref, 0);
-	}
 
 	chan->local = alloc_percpu(typeof(*chan->local));
 	if (!chan->local)
@@ -988,29 +966,36 @@ static int __dma_async_device_channel_register(struct dma_device *device,
 	 * When the chan_id is a negative value, we are dynamically adding
 	 * the channel. Otherwise we are static enumerating.
 	 */
-	chan->chan_id = chan_id < 0 ? chancnt : chan_id;
+	mutex_lock(&device->chan_mutex);
+	chan->chan_id = ida_alloc(&device->chan_ida, GFP_KERNEL);
+	mutex_unlock(&device->chan_mutex);
+	if (chan->chan_id < 0) {
+		pr_err("%s: unable to alloc ida for chan: %d\n",
+		       __func__, chan->chan_id);
+		goto err_out;
+	}
+
 	chan->dev->device.class = &dma_devclass;
 	chan->dev->device.parent = device->dev;
 	chan->dev->chan = chan;
-	chan->dev->idr_ref = idr_ref;
 	chan->dev->dev_id = device->dev_id;
-	atomic_inc(idr_ref);
 	dev_set_name(&chan->dev->device, "dma%dchan%d",
 		     device->dev_id, chan->chan_id);
-
 	rc = device_register(&chan->dev->device);
 	if (rc)
-		goto err_out;
+		goto err_out_ida;
 	chan->client_count = 0;
-	device->chancnt = chan->chan_id + 1;
+	device->chancnt++;
 
 	return 0;
 
+ err_out_ida:
+	mutex_lock(&device->chan_mutex);
+	ida_free(&device->chan_ida, chan->chan_id);
+	mutex_unlock(&device->chan_mutex);
  err_out:
 	free_percpu(chan->local);
 	kfree(chan->dev);
-	if (atomic_dec_return(idr_ref) == 0)
-		kfree(idr_ref);
 	return rc;
 }
 
@@ -1019,7 +1004,7 @@ int dma_async_device_channel_register(struct dma_device *device,
 {
 	int rc;
 
-	rc = __dma_async_device_channel_register(device, chan, -1);
+	rc = __dma_async_device_channel_register(device, chan);
 	if (rc < 0)
 		return rc;
 
@@ -1039,6 +1024,9 @@ static void __dma_async_device_channel_unregister(struct dma_device *device,
 	device->chancnt--;
 	chan->dev->chan = NULL;
 	mutex_unlock(&dma_list_mutex);
+	mutex_lock(&device->chan_mutex);
+	ida_free(&device->chan_ida, chan->chan_id);
+	mutex_unlock(&device->chan_mutex);
 	device_unregister(&chan->dev->device);
 	free_percpu(chan->local);
 }
@@ -1061,7 +1049,7 @@ EXPORT_SYMBOL_GPL(dma_async_device_channel_unregister);
  */
 int dma_async_device_register(struct dma_device *device)
 {
-	int rc, i = 0;
+	int rc;
 	struct dma_chan* chan;
 
 	if (!device)
@@ -1166,9 +1154,12 @@ int dma_async_device_register(struct dma_device *device)
 	if (rc != 0)
 		return rc;
 
+	mutex_init(&device->chan_mutex);
+	ida_init(&device->chan_ida);
+
 	/* represent channels in sysfs. Probably want devs too */
 	list_for_each_entry(chan, &device->channels, device_node) {
-		rc = __dma_async_device_channel_register(device, chan, i++);
+		rc = __dma_async_device_channel_register(device, chan);
 		if (rc < 0)
 			goto err_out;
 	}
@@ -1239,6 +1230,7 @@ void dma_async_device_unregister(struct dma_device *device)
 	 */
 	dma_cap_set(DMA_PRIVATE, device->cap_mask);
 	dma_channel_rebalance();
+	ida_free(&dma_ida, device->dev_id);
 	dma_device_put(device);
 	mutex_unlock(&dma_list_mutex);
 }
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 64461fc64e1bd..7adc007f2023f 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -336,13 +336,11 @@ struct dma_chan {
  * @chan: driver channel device
  * @device: sysfs device
  * @dev_id: parent dma_device dev_id
- * @idr_ref: reference count to gate release of dma_device dev_id
  */
 struct dma_chan_dev {
 	struct dma_chan *chan;
 	struct device device;
 	int dev_id;
-	atomic_t *idr_ref;
 };
 
 /**
@@ -827,6 +825,8 @@ struct dma_device {
 	int dev_id;
 	struct device *dev;
 	struct module *owner;
+	struct ida chan_ida;
+	struct mutex chan_mutex;	/* to protect chan_ida */
 
 	u32 src_addr_widths;
 	u32 dst_addr_widths;
-- 
2.20.1

[PATCH AUTOSEL 5.6 28/50] dmaengine: dmatest: Fix iteration non-stop logic

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit b9f960201249f20deea586b4ec814669b4c6b1c0 ]

Under some circumstances, i.e. when test is still running and about to
time out and user runs, for example,

	grep -H . /sys/module/dmatest/parameters/*

the iterations parameter is not respected and test is going on and on until
user gives

	echo 0 > /sys/module/dmatest/parameters/run

This is not what expected.

The history of this bug is interesting. I though that the commit
  2d88ce76eb98 ("dmatest: add a 'wait' parameter")
is a culprit, but looking closer to the code I think it simple revealed the
broken logic from the day one, i.e. in the commit
  0a2ff57d6fba ("dmaengine: dmatest: add a maximum number of test iterations")
which adds iterations parameter.

So, to the point, the conditional of checking the thread to be stopped being
first part of conjunction logic prevents to check iterations. Thus, we have to
always check both conditions to be able to stop after given iterations.

Since it wasn't visible before second commit appeared, I add a respective
Fixes tag.

Fixes: 2d88ce76eb98 ("dmatest: add a 'wait' parameter")
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20200424161147.16895-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dmatest.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index a2cadfa2e6d78..4993e3e5c5b01 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -662,8 +662,8 @@ static int dmatest_func(void *data)
 		flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
 
 	ktime = ktime_get();
-	while (!kthread_should_stop()
-	       && !(params->iterations && total_tests >= params->iterations)) {
+	while (!(kthread_should_stop() ||
+	       (params->iterations && total_tests >= params->iterations))) {
 		struct dma_async_tx_descriptor *tx = NULL;
 		struct dmaengine_unmap_data *um;
 		dma_addr_t *dsts;
-- 
2.20.1

[PATCH AUTOSEL 5.6 29/50] i2c: iproc: generate stop event for slave writes

[Sasha Levin]

From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>

[ Upstream commit 068143a8195fb0fdeea1f3ca430b3db0f6d04a53 ]

When slave status is I2C_SLAVE_RX_END, generate I2C_SLAVE_STOP
event to i2c_client.

Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-bcm-iproc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 30efb7913b2e1..b58224b7ba791 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -360,6 +360,9 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
 			value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
 			i2c_slave_event(iproc_i2c->slave,
 					I2C_SLAVE_WRITE_RECEIVED, &value);
+			if (rx_status == I2C_SLAVE_RX_END)
+				i2c_slave_event(iproc_i2c->slave,
+						I2C_SLAVE_STOP, &value);
 		}
 	} else if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) {
 		/* Master read other than start */
-- 
2.20.1

[PATCH AUTOSEL 5.6 29/50] i2c: iproc: generate stop event for slave writes

[Sasha Levin]

From: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>

[ Upstream commit 068143a8195fb0fdeea1f3ca430b3db0f6d04a53 ]

When slave status is I2C_SLAVE_RX_END, generate I2C_SLAVE_STOP
event to i2c_client.

Fixes: c245d94ed106 ("i2c: iproc: Add multi byte read-write support for slave mode")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-bcm-iproc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 30efb7913b2e1..b58224b7ba791 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -360,6 +360,9 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
 			value = (u8)((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
 			i2c_slave_event(iproc_i2c->slave,
 					I2C_SLAVE_WRITE_RECEIVED, &value);
+			if (rx_status == I2C_SLAVE_RX_END)
+				i2c_slave_event(iproc_i2c->slave,
+						I2C_SLAVE_STOP, &value);
 		}
 	} else if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) {
 		/* Master read other than start */
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 30/50] ALSA: hda/hdmi: fix race in monitor detection during probe

[Sasha Levin]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

[ Upstream commit ca76282b6faffc83601c25bd2a95f635c03503ef ]

A race exists between build_pcms() and build_controls() phases of codec
setup. Build_pcms() sets up notifier for jack events. If a monitor event
is received before build_controls() is run, the initial jack state is
lost and never reported via mixer controls.

The problem can be hit at least with SOF as the controller driver. SOF
calls snd_hda_codec_build_controls() in its workqueue-based probe and
this can be delayed enough to hit the race condition.

Fix the issue by invalidating the per-pin ELD information when
build_controls() is called. The existing call to hdmi_present_sense()
will update the ELD contents. This ensures initial monitor state is
correctly reflected via mixer controls.

BugLink: https://github.com/thesofproject/linux/issues/1687
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 8bc4d66ff986b..ebcb19b135f0d 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2318,7 +2318,9 @@ static int generic_hdmi_build_controls(struct hda_codec *codec)
 
 	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
 		struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
+		struct hdmi_eld *pin_eld = &per_pin->sink_eld;
 
+		pin_eld->eld_valid = false;
 		hdmi_present_sense(per_pin, 0);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 30/50] ALSA: hda/hdmi: fix race in monitor detection during probe

[Sasha Levin]

From: Kai Vehmanen <kai.vehmanen@linux.intel.com>

[ Upstream commit ca76282b6faffc83601c25bd2a95f635c03503ef ]

A race exists between build_pcms() and build_controls() phases of codec
setup. Build_pcms() sets up notifier for jack events. If a monitor event
is received before build_controls() is run, the initial jack state is
lost and never reported via mixer controls.

The problem can be hit at least with SOF as the controller driver. SOF
calls snd_hda_codec_build_controls() in its workqueue-based probe and
this can be delayed enough to hit the race condition.

Fix the issue by invalidating the per-pin ELD information when
build_controls() is called. The existing call to hdmi_present_sense()
will update the ELD contents. This ensures initial monitor state is
correctly reflected via mixer controls.

BugLink: https://github.com/thesofproject/linux/issues/1687
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200428123836.24512-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_hdmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 8bc4d66ff986b..ebcb19b135f0d 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -2318,7 +2318,9 @@ static int generic_hdmi_build_controls(struct hda_codec *codec)
 
 	for (pin_idx = 0; pin_idx < spec->num_pins; pin_idx++) {
 		struct hdmi_spec_per_pin *per_pin = get_pin(spec, pin_idx);
+		struct hdmi_eld *pin_eld = &per_pin->sink_eld;
 
+		pin_eld->eld_valid = false;
 		hdmi_present_sense(per_pin, 0);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 31/50] dmaengine: dmatest: Fix process hang when reading 'wait' parameter

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit aa72f1d20ee973d68f26d46fce5e1cf6f9b7e1ca ]

If we do

  % echo 1 > /sys/module/dmatest/parameters/run
  [  115.851124] dmatest: Could not start test, no channels configured

  % echo dma8chan7 > /sys/module/dmatest/parameters/channel
  [  127.563872] dmatest: Added 1 threads using dma8chan7

  % cat /sys/module/dmatest/parameters/wait
  ... !!! HANG !!! ...

The culprit is the commit 6138f967bccc

  ("dmaengine: dmatest: Use fixed point div to calculate iops")

which makes threads not to run, but pending and being kicked off by writing
to the 'run' node. However, it forgot to consider 'wait' routine to avoid
above mentioned case.

In order to fix this, check for really running threads, i.e. with pending
and done flags unset.

It's pity the culprit commit hadn't updated documentation and tested all
possible scenarios.

Fixes: 6138f967bccc ("dmaengine: dmatest: Use fixed point div to calculate iops")
Cc: Seraj Alijan <seraj.alijan@sondrel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200428113518.70620-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dmatest.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 4993e3e5c5b01..364dd34799d45 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -240,7 +240,7 @@ static bool is_threaded_test_run(struct dmatest_info *info)
 		struct dmatest_thread *thread;
 
 		list_for_each_entry(thread, &dtc->threads, node) {
-			if (!thread->done)
+			if (!thread->done && !thread->pending)
 				return true;
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 5.6 32/50] drm/amd/powerplay: avoid using pm_en before it is initialized revised

[Sasha Levin]

From: Tiecheng Zhou <Tiecheng.Zhou@amd.com>

[ Upstream commit 690ae30be163d5262feae01335b2a6f30569e5aa ]

hwmgr->pm_en is initialized at hwmgr_hw_init.

during amdgpu_device_init, there is amdgpu_asic_reset that calls to
soc15_asic_reset (for V320 usecase, Vega10 asic), in which:
1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en)
2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en)

pm_en is used in the above two cases while it has not yet been initialized

So avoid using pm_en in the above two functions for V320 passthrough.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index c195575366a3b..e4e5a53b2b4ea 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -1435,7 +1435,8 @@ static int pp_get_asic_baco_capability(void *handle, bool *cap)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->get_asic_baco_capability)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->get_asic_baco_capability)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
@@ -1469,7 +1470,8 @@ static int pp_set_asic_baco_state(void *handle, int state)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->set_asic_baco_state)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->set_asic_baco_state)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
-- 
2.20.1

[PATCH AUTOSEL 5.6 32/50] drm/amd/powerplay: avoid using pm_en before it is initialized revised

[Sasha Levin]

From: Tiecheng Zhou <Tiecheng.Zhou@amd.com>

[ Upstream commit 690ae30be163d5262feae01335b2a6f30569e5aa ]

hwmgr->pm_en is initialized at hwmgr_hw_init.

during amdgpu_device_init, there is amdgpu_asic_reset that calls to
soc15_asic_reset (for V320 usecase, Vega10 asic), in which:
1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en)
2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en)

pm_en is used in the above two cases while it has not yet been initialized

So avoid using pm_en in the above two functions for V320 passthrough.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index c195575366a3b..e4e5a53b2b4ea 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -1435,7 +1435,8 @@ static int pp_get_asic_baco_capability(void *handle, bool *cap)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->get_asic_baco_capability)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->get_asic_baco_capability)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
@@ -1469,7 +1470,8 @@ static int pp_set_asic_baco_state(void *handle, int state)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->set_asic_baco_state)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->set_asic_baco_state)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.6 32/50] drm/amd/powerplay: avoid using pm_en before it is initialized revised

[Sasha Levin]

From: Tiecheng Zhou <Tiecheng.Zhou@amd.com>

[ Upstream commit 690ae30be163d5262feae01335b2a6f30569e5aa ]

hwmgr->pm_en is initialized at hwmgr_hw_init.

during amdgpu_device_init, there is amdgpu_asic_reset that calls to
soc15_asic_reset (for V320 usecase, Vega10 asic), in which:
1) soc15_asic_reset_method calls to pp_get_asic_baco_capability (pm_en)
2) soc15_asic_baco_reset calls to pp_set_asic_baco_state (pm_en)

pm_en is used in the above two cases while it has not yet been initialized

So avoid using pm_en in the above two functions for V320 passthrough.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Tiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index c195575366a3b..e4e5a53b2b4ea 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -1435,7 +1435,8 @@ static int pp_get_asic_baco_capability(void *handle, bool *cap)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->get_asic_baco_capability)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->get_asic_baco_capability)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
@@ -1469,7 +1470,8 @@ static int pp_set_asic_baco_state(void *handle, int state)
 	if (!hwmgr)
 		return -EINVAL;
 
-	if (!hwmgr->pm_en || !hwmgr->hwmgr_func->set_asic_baco_state)
+	if (!(hwmgr->not_vf && amdgpu_dpm) ||
+		!hwmgr->hwmgr_func->set_asic_baco_state)
 		return 0;
 
 	mutex_lock(&hwmgr->smu_lock);
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Sasha Levin]

From: Marek Olšák <marek.olsak@amd.com>

[ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]

This fixes GPU hangs due to cache coherency issues.
Bump the driver version. Split out from the original patch.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 42f4febe24c6d..8d45a2b662aeb 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -85,9 +85,10 @@
  * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
  * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
  * - 3.36.0 - Allow reading more status registers on si/cik
+ * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
  */
 #define KMS_DRIVER_MAJOR	3
-#define KMS_DRIVER_MINOR	36
+#define KMS_DRIVER_MINOR	37
 #define KMS_DRIVER_PATCHLEVEL	0
 
 int amdgpu_vram_limit = 0;
-- 
2.20.1

[PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Sasha Levin]

From: Marek Olšák <marek.olsak@amd.com>

[ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]

This fixes GPU hangs due to cache coherency issues.
Bump the driver version. Split out from the original patch.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 42f4febe24c6d..8d45a2b662aeb 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -85,9 +85,10 @@
  * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
  * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
  * - 3.36.0 - Allow reading more status registers on si/cik
+ * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
  */
 #define KMS_DRIVER_MAJOR	3
-#define KMS_DRIVER_MINOR	36
+#define KMS_DRIVER_MINOR	37
 #define KMS_DRIVER_PATCHLEVEL	0
 
 int amdgpu_vram_limit = 0;
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Sasha Levin]

From: Marek Olšák <marek.olsak@amd.com>

[ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]

This fixes GPU hangs due to cache coherency issues.
Bump the driver version. Split out from the original patch.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 42f4febe24c6d..8d45a2b662aeb 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -85,9 +85,10 @@
  * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
  * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
  * - 3.36.0 - Allow reading more status registers on si/cik
+ * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
  */
 #define KMS_DRIVER_MAJOR	3
-#define KMS_DRIVER_MINOR	36
+#define KMS_DRIVER_MINOR	37
 #define KMS_DRIVER_PATCHLEVEL	0
 
 int amdgpu_vram_limit = 0;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Michel Dänzer]

On 2020-05-07 4:27 p.m., Sasha Levin wrote:
> From: Marek Olšák <marek.olsak@amd.com>
> 
> [ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]
> 
> This fixes GPU hangs due to cache coherency issues.
> Bump the driver version. Split out from the original patch.
> 
> Signed-off-by: Marek Olšák <marek.olsak@amd.com>
> Reviewed-by: Christian König <christian.koenig@amd.com>
> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index 42f4febe24c6d..8d45a2b662aeb 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -85,9 +85,10 @@
>   * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
>   * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
>   * - 3.36.0 - Allow reading more status registers on si/cik
> + * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
>   */
>  #define KMS_DRIVER_MAJOR	3
> -#define KMS_DRIVER_MINOR	36
> +#define KMS_DRIVER_MINOR	37
>  #define KMS_DRIVER_PATCHLEVEL	0
>  
>  int amdgpu_vram_limit = 0;
> 

This requires the parent commit fdf83646c0542ecfb9adc4db8f741a1f43dca058
"drm/amdgpu: invalidate L2 before SDMA IBs (v2)". KMS_DRIVER_MINOR is
bumped to signal to userspace the fix in that commit is present.


-- 
Earthling Michel Dänzer               |               https://redhat.com
Libre software enthusiast             |             Mesa and X developer

Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Michel Dänzer]

On 2020-05-07 4:27 p.m., Sasha Levin wrote:
> From: Marek Olšák <marek.olsak@amd.com>
> 
> [ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]
> 
> This fixes GPU hangs due to cache coherency issues.
> Bump the driver version. Split out from the original patch.
> 
> Signed-off-by: Marek Olšák <marek.olsak@amd.com>
> Reviewed-by: Christian König <christian.koenig@amd.com>
> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index 42f4febe24c6d..8d45a2b662aeb 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -85,9 +85,10 @@
>   * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
>   * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
>   * - 3.36.0 - Allow reading more status registers on si/cik
> + * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
>   */
>  #define KMS_DRIVER_MAJOR	3
> -#define KMS_DRIVER_MINOR	36
> +#define KMS_DRIVER_MINOR	37
>  #define KMS_DRIVER_PATCHLEVEL	0
>  
>  int amdgpu_vram_limit = 0;
> 

This requires the parent commit fdf83646c0542ecfb9adc4db8f741a1f43dca058
"drm/amdgpu: invalidate L2 before SDMA IBs (v2)". KMS_DRIVER_MINOR is
bumped to signal to userspace the fix in that commit is present.


-- 
Earthling Michel Dänzer               |               https://redhat.com
Libre software enthusiast             |             Mesa and X developer
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Michel Dänzer]

On 2020-05-07 4:27 p.m., Sasha Levin wrote:
> From: Marek Olšák <marek.olsak@amd.com>
> 
> [ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]
> 
> This fixes GPU hangs due to cache coherency issues.
> Bump the driver version. Split out from the original patch.
> 
> Signed-off-by: Marek Olšák <marek.olsak@amd.com>
> Reviewed-by: Christian König <christian.koenig@amd.com>
> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index 42f4febe24c6d..8d45a2b662aeb 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -85,9 +85,10 @@
>   * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
>   * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
>   * - 3.36.0 - Allow reading more status registers on si/cik
> + * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
>   */
>  #define KMS_DRIVER_MAJOR	3
> -#define KMS_DRIVER_MINOR	36
> +#define KMS_DRIVER_MINOR	37
>  #define KMS_DRIVER_PATCHLEVEL	0
>  
>  int amdgpu_vram_limit = 0;
> 

This requires the parent commit fdf83646c0542ecfb9adc4db8f741a1f43dca058
"drm/amdgpu: invalidate L2 before SDMA IBs (v2)". KMS_DRIVER_MINOR is
bumped to signal to userspace the fix in that commit is present.


-- 
Earthling Michel Dänzer               |               https://redhat.com
Libre software enthusiast             |             Mesa and X developer
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Sasha Levin]

On Thu, May 07, 2020 at 06:11:17PM +0200, Michel Dänzer wrote:
>On 2020-05-07 4:27 p.m., Sasha Levin wrote:
>> From: Marek Olšák <marek.olsak@amd.com>
>>
>> [ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]
>>
>> This fixes GPU hangs due to cache coherency issues.
>> Bump the driver version. Split out from the original patch.
>>
>> Signed-off-by: Marek Olšák <marek.olsak@amd.com>
>> Reviewed-by: Christian König <christian.koenig@amd.com>
>> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> index 42f4febe24c6d..8d45a2b662aeb 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> @@ -85,9 +85,10 @@
>>   * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
>>   * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
>>   * - 3.36.0 - Allow reading more status registers on si/cik
>> + * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
>>   */
>>  #define KMS_DRIVER_MAJOR	3
>> -#define KMS_DRIVER_MINOR	36
>> +#define KMS_DRIVER_MINOR	37
>>  #define KMS_DRIVER_PATCHLEVEL	0
>>
>>  int amdgpu_vram_limit = 0;
>>
>
>This requires the parent commit fdf83646c0542ecfb9adc4db8f741a1f43dca058
>"drm/amdgpu: invalidate L2 before SDMA IBs (v2)". KMS_DRIVER_MINOR is
>bumped to signal to userspace the fix in that commit is present.

I've grabbed the commit you've pointed out as well as ce73516d42c9
("drm/amdgpu: simplify padding calculations (v2)") to make the backport
apply cleanly, thank you!

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Sasha Levin]

On Thu, May 07, 2020 at 06:11:17PM +0200, Michel Dänzer wrote:
>On 2020-05-07 4:27 p.m., Sasha Levin wrote:
>> From: Marek Olšák <marek.olsak@amd.com>
>>
>> [ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]
>>
>> This fixes GPU hangs due to cache coherency issues.
>> Bump the driver version. Split out from the original patch.
>>
>> Signed-off-by: Marek Olšák <marek.olsak@amd.com>
>> Reviewed-by: Christian König <christian.koenig@amd.com>
>> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> index 42f4febe24c6d..8d45a2b662aeb 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> @@ -85,9 +85,10 @@
>>   * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
>>   * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
>>   * - 3.36.0 - Allow reading more status registers on si/cik
>> + * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
>>   */
>>  #define KMS_DRIVER_MAJOR	3
>> -#define KMS_DRIVER_MINOR	36
>> +#define KMS_DRIVER_MINOR	37
>>  #define KMS_DRIVER_PATCHLEVEL	0
>>
>>  int amdgpu_vram_limit = 0;
>>
>
>This requires the parent commit fdf83646c0542ecfb9adc4db8f741a1f43dca058
>"drm/amdgpu: invalidate L2 before SDMA IBs (v2)". KMS_DRIVER_MINOR is
>bumped to signal to userspace the fix in that commit is present.

I've grabbed the commit you've pointed out as well as ce73516d42c9
("drm/amdgpu: simplify padding calculations (v2)") to make the backport
apply cleanly, thank you!

-- 
Thanks,
Sasha
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Sasha Levin]

On Thu, May 07, 2020 at 06:11:17PM +0200, Michel Dänzer wrote:
>On 2020-05-07 4:27 p.m., Sasha Levin wrote:
>> From: Marek Olšák <marek.olsak@amd.com>
>>
>> [ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]
>>
>> This fixes GPU hangs due to cache coherency issues.
>> Bump the driver version. Split out from the original patch.
>>
>> Signed-off-by: Marek Olšák <marek.olsak@amd.com>
>> Reviewed-by: Christian König <christian.koenig@amd.com>
>> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
>> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> index 42f4febe24c6d..8d45a2b662aeb 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> @@ -85,9 +85,10 @@
>>   * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
>>   * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
>>   * - 3.36.0 - Allow reading more status registers on si/cik
>> + * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
>>   */
>>  #define KMS_DRIVER_MAJOR	3
>> -#define KMS_DRIVER_MINOR	36
>> +#define KMS_DRIVER_MINOR	37
>>  #define KMS_DRIVER_PATCHLEVEL	0
>>
>>  int amdgpu_vram_limit = 0;
>>
>
>This requires the parent commit fdf83646c0542ecfb9adc4db8f741a1f43dca058
>"drm/amdgpu: invalidate L2 before SDMA IBs (v2)". KMS_DRIVER_MINOR is
>bumped to signal to userspace the fix in that commit is present.

I've grabbed the commit you've pointed out as well as ce73516d42c9
("drm/amdgpu: simplify padding calculations (v2)") to make the backport
apply cleanly, thank you!

-- 
Thanks,
Sasha
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Marek Olšák]

[-- Attachment #1.1: Type: text/plain, Size: 1843 bytes --]

Hi Sasha,

I disagree with this. Bumping the driver version will have implications on
other new features, because it's like an ABI barrier exposing new
functionality.

Marek

On Thu, May 7, 2020 at 10:28 AM Sasha Levin <sashal@kernel.org> wrote:

> From: Marek Olšák <marek.olsak@amd.com>
>
> [ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]
>
> This fixes GPU hangs due to cache coherency issues.
> Bump the driver version. Split out from the original patch.
>
> Signed-off-by: Marek Olšák <marek.olsak@amd.com>
> Reviewed-by: Christian König <christian.koenig@amd.com>
> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index 42f4febe24c6d..8d45a2b662aeb 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -85,9 +85,10 @@
>   * - 3.34.0 - Non-DC can flip correctly between buffers with different
> pitches
>   * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
>   * - 3.36.0 - Allow reading more status registers on si/cik
> + * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
>   */
>  #define KMS_DRIVER_MAJOR       3
> -#define KMS_DRIVER_MINOR       36
> +#define KMS_DRIVER_MINOR       37
>  #define KMS_DRIVER_PATCHLEVEL  0
>
>  int amdgpu_vram_limit = 0;
> --
> 2.20.1
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
>

[-- Attachment #1.2: Type: text/html, Size: 3287 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Marek Olšák]

[-- Attachment #1.1: Type: text/plain, Size: 1843 bytes --]

Hi Sasha,

I disagree with this. Bumping the driver version will have implications on
other new features, because it's like an ABI barrier exposing new
functionality.

Marek

On Thu, May 7, 2020 at 10:28 AM Sasha Levin <sashal@kernel.org> wrote:

> From: Marek Olšák <marek.olsak@amd.com>
>
> [ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]
>
> This fixes GPU hangs due to cache coherency issues.
> Bump the driver version. Split out from the original patch.
>
> Signed-off-by: Marek Olšák <marek.olsak@amd.com>
> Reviewed-by: Christian König <christian.koenig@amd.com>
> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> index 42f4febe24c6d..8d45a2b662aeb 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
> @@ -85,9 +85,10 @@
>   * - 3.34.0 - Non-DC can flip correctly between buffers with different
> pitches
>   * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
>   * - 3.36.0 - Allow reading more status registers on si/cik
> + * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
>   */
>  #define KMS_DRIVER_MAJOR       3
> -#define KMS_DRIVER_MINOR       36
> +#define KMS_DRIVER_MINOR       37
>  #define KMS_DRIVER_PATCHLEVEL  0
>
>  int amdgpu_vram_limit = 0;
> --
> 2.20.1
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
>

[-- Attachment #1.2: Type: text/html, Size: 3287 bytes --]

[-- Attachment #2: Type: text/plain, Size: 154 bytes --]

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Deucher, Alexander]

[-- Attachment #1.1: Type: text/plain, Size: 3056 bytes --]

[AMD Public Use]

Yes, please drop this patch for stable.

Alex
________________________________
From: Marek Olšák <maraeo@gmail.com>
Sent: Monday, May 18, 2020 6:35 PM
To: Sasha Levin <sashal@kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; stable@vger.kernel.org <stable@vger.kernel.org>; Pelloux-prayer, Pierre-eric <Pierre-eric.Pelloux-prayer@amd.com>; Olsak, Marek <Marek.Olsak@amd.com>; amd-gfx mailing list <amd-gfx@lists.freedesktop.org>; dri-devel <dri-devel@lists.freedesktop.org>; Deucher, Alexander <Alexander.Deucher@amd.com>; Koenig, Christian <Christian.Koenig@amd.com>
Subject: Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

Hi Sasha,

I disagree with this. Bumping the driver version will have implications on other new features, because it's like an ABI barrier exposing new functionality.

Marek

On Thu, May 7, 2020 at 10:28 AM Sasha Levin <sashal@kernel.org<mailto:sashal@kernel.org>> wrote:
From: Marek Olšák <marek.olsak@amd.com<mailto:marek.olsak@amd.com>>

[ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]

This fixes GPU hangs due to cache coherency issues.
Bump the driver version. Split out from the original patch.

Signed-off-by: Marek Olšák <marek.olsak@amd.com<mailto:marek.olsak@amd.com>>
Reviewed-by: Christian König <christian.koenig@amd.com<mailto:christian.koenig@amd.com>>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com<mailto:pierre-eric.pelloux-prayer@amd.com>>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com<mailto:alexander.deucher@amd.com>>
Signed-off-by: Sasha Levin <sashal@kernel.org<mailto:sashal@kernel.org>>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 42f4febe24c6d..8d45a2b662aeb 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -85,9 +85,10 @@
  * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
  * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
  * - 3.36.0 - Allow reading more status registers on si/cik
+ * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
  */
 #define KMS_DRIVER_MAJOR       3
-#define KMS_DRIVER_MINOR       36
+#define KMS_DRIVER_MINOR       37
 #define KMS_DRIVER_PATCHLEVEL  0

 int amdgpu_vram_limit = 0;
--
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org<mailto:amd-gfx@lists.freedesktop.org>
https://lists.freedesktop.org/mailman/listinfo/amd-gfx<https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data=02%7C01%7Calexander.deucher%40amd.com%7C2bb4939b162b4d66d57708d7fb7bd608%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637254381604715852&sdata=uJEI0CDUeUbUGUgnhnobpKygBueEGg6UqwgzkEtIsh8%3D&reserved=0>

[-- Attachment #1.2: Type: text/html, Size: 5730 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

[Deucher, Alexander]

[-- Attachment #1.1: Type: text/plain, Size: 3056 bytes --]

[AMD Public Use]

Yes, please drop this patch for stable.

Alex
________________________________
From: Marek Olšák <maraeo@gmail.com>
Sent: Monday, May 18, 2020 6:35 PM
To: Sasha Levin <sashal@kernel.org>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>; stable@vger.kernel.org <stable@vger.kernel.org>; Pelloux-prayer, Pierre-eric <Pierre-eric.Pelloux-prayer@amd.com>; Olsak, Marek <Marek.Olsak@amd.com>; amd-gfx mailing list <amd-gfx@lists.freedesktop.org>; dri-devel <dri-devel@lists.freedesktop.org>; Deucher, Alexander <Alexander.Deucher@amd.com>; Koenig, Christian <Christian.Koenig@amd.com>
Subject: Re: [PATCH AUTOSEL 5.6 33/50] drm/amdgpu: bump version for invalidate L2 before SDMA IBs

Hi Sasha,

I disagree with this. Bumping the driver version will have implications on other new features, because it's like an ABI barrier exposing new functionality.

Marek

On Thu, May 7, 2020 at 10:28 AM Sasha Levin <sashal@kernel.org<mailto:sashal@kernel.org>> wrote:
From: Marek Olšák <marek.olsak@amd.com<mailto:marek.olsak@amd.com>>

[ Upstream commit 9017a4897a20658f010bebea825262963c10afa6 ]

This fixes GPU hangs due to cache coherency issues.
Bump the driver version. Split out from the original patch.

Signed-off-by: Marek Olšák <marek.olsak@amd.com<mailto:marek.olsak@amd.com>>
Reviewed-by: Christian König <christian.koenig@amd.com<mailto:christian.koenig@amd.com>>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com<mailto:pierre-eric.pelloux-prayer@amd.com>>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com<mailto:alexander.deucher@amd.com>>
Signed-off-by: Sasha Levin <sashal@kernel.org<mailto:sashal@kernel.org>>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index 42f4febe24c6d..8d45a2b662aeb 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -85,9 +85,10 @@
  * - 3.34.0 - Non-DC can flip correctly between buffers with different pitches
  * - 3.35.0 - Add drm_amdgpu_info_device::tcc_disabled_mask
  * - 3.36.0 - Allow reading more status registers on si/cik
+ * - 3.37.0 - L2 is invalidated before SDMA IBs, needed for correctness
  */
 #define KMS_DRIVER_MAJOR       3
-#define KMS_DRIVER_MINOR       36
+#define KMS_DRIVER_MINOR       37
 #define KMS_DRIVER_PATCHLEVEL  0

 int amdgpu_vram_limit = 0;
--
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org<mailto:amd-gfx@lists.freedesktop.org>
https://lists.freedesktop.org/mailman/listinfo/amd-gfx<https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data=02%7C01%7Calexander.deucher%40amd.com%7C2bb4939b162b4d66d57708d7fb7bd608%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637254381604715852&sdata=uJEI0CDUeUbUGUgnhnobpKygBueEGg6UqwgzkEtIsh8%3D&reserved=0>

[-- Attachment #1.2: Type: text/html, Size: 5730 bytes --]

[-- Attachment #2: Type: text/plain, Size: 154 bytes --]

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.6 34/50] SUNRPC: defer slow parts of rpc_free_client() to a workqueue.

[Sasha Levin]

From: NeilBrown <neilb@suse.de>

[ Upstream commit 7c4310ff56422ea43418305d22bbc5fe19150ec4 ]

The rpciod workqueue is on the write-out path for freeing dirty memory,
so it is important that it never block waiting for memory to be
allocated - this can lead to a deadlock.

rpc_execute() - which is often called by an rpciod work item - calls
rcp_task_release_client() which can lead to rpc_free_client().

rpc_free_client() makes two calls which could potentially block wating
for memory allocation.

rpc_clnt_debugfs_unregister() calls into debugfs and will block while
any of the debugfs files are being accessed.  In particular it can block
while any of the 'open' methods are being called and all of these use
malloc for one thing or another.  So this can deadlock if the memory
allocation waits for NFS to complete some writes via rpciod.

rpc_clnt_remove_pipedir() can take the inode_lock() and while it isn't
obvious that memory allocations can happen while the lock it held, it is
safer to assume they might and to not let rpciod call
rpc_clnt_remove_pipedir().

So this patch moves these two calls (together with the final kfree() and
rpciod_down()) into a work-item to be run from the system work-queue.
rpciod can continue its important work, and the final stages of the free
can happen whenever they happen.

I have seen this deadlock on a 4.12 based kernel where debugfs used
synchronize_srcu() when removing objects.  synchronize_srcu() requires a
workqueue and there were no free workther threads and none could be
allocated.  While debugsfs no longer uses SRCU, I believe the deadlock
is still possible.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/sunrpc/clnt.h |  8 +++++++-
 net/sunrpc/clnt.c           | 21 +++++++++++++++++----
 2 files changed, 24 insertions(+), 5 deletions(-)

diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h
index ca7e108248e21..7bd124e06b36f 100644
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -71,7 +71,13 @@ struct rpc_clnt {
 #if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
 	struct dentry		*cl_debugfs;	/* debugfs directory */
 #endif
-	struct rpc_xprt_iter	cl_xpi;
+	/* cl_work is only needed after cl_xpi is no longer used,
+	 * and that are of similar size
+	 */
+	union {
+		struct rpc_xprt_iter	cl_xpi;
+		struct work_struct	cl_work;
+	};
 	const struct cred	*cl_cred;
 };
 
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 7324b21f923e6..a2c215a6980d8 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -880,6 +880,20 @@ EXPORT_SYMBOL_GPL(rpc_shutdown_client);
 /*
  * Free an RPC client
  */
+static void rpc_free_client_work(struct work_struct *work)
+{
+	struct rpc_clnt *clnt = container_of(work, struct rpc_clnt, cl_work);
+
+	/* These might block on processes that might allocate memory,
+	 * so they cannot be called in rpciod, so they are handled separately
+	 * here.
+	 */
+	rpc_clnt_debugfs_unregister(clnt);
+	rpc_clnt_remove_pipedir(clnt);
+
+	kfree(clnt);
+	rpciod_down();
+}
 static struct rpc_clnt *
 rpc_free_client(struct rpc_clnt *clnt)
 {
@@ -890,17 +904,16 @@ rpc_free_client(struct rpc_clnt *clnt)
 			rcu_dereference(clnt->cl_xprt)->servername);
 	if (clnt->cl_parent != clnt)
 		parent = clnt->cl_parent;
-	rpc_clnt_debugfs_unregister(clnt);
-	rpc_clnt_remove_pipedir(clnt);
 	rpc_unregister_client(clnt);
 	rpc_free_iostats(clnt->cl_metrics);
 	clnt->cl_metrics = NULL;
 	xprt_put(rcu_dereference_raw(clnt->cl_xprt));
 	xprt_iter_destroy(&clnt->cl_xpi);
-	rpciod_down();
 	put_cred(clnt->cl_cred);
 	rpc_free_clid(clnt);
-	kfree(clnt);
+
+	INIT_WORK(&clnt->cl_work, rpc_free_client_work);
+	schedule_work(&clnt->cl_work);
 	return parent;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 35/50] drm/amd/display: check if REFCLK_CNTL register is present

[Sasha Levin]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

[ Upstream commit 3159d41db3a04330c31ece32f8b29752fc114848 ]

Check before programming the register since it isn't present on
all IPs using this code.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index a444fed941849..ad422e00f9fec 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -2306,7 +2306,8 @@ void dcn20_fpga_init_hw(struct dc *dc)
 
 	REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_REFDIV, 2);
 	REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_ENABLE, 1);
-	REG_WRITE(REFCLK_CNTL, 0);
+	if (REG(REFCLK_CNTL))
+		REG_WRITE(REFCLK_CNTL, 0);
 	//
 
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 35/50] drm/amd/display: check if REFCLK_CNTL register is present

[Sasha Levin]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

[ Upstream commit 3159d41db3a04330c31ece32f8b29752fc114848 ]

Check before programming the register since it isn't present on
all IPs using this code.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index a444fed941849..ad422e00f9fec 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -2306,7 +2306,8 @@ void dcn20_fpga_init_hw(struct dc *dc)
 
 	REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_REFDIV, 2);
 	REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_ENABLE, 1);
-	REG_WRITE(REFCLK_CNTL, 0);
+	if (REG(REFCLK_CNTL))
+		REG_WRITE(REFCLK_CNTL, 0);
 	//
 
 
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.6 35/50] drm/amd/display: check if REFCLK_CNTL register is present

[Sasha Levin]

From: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>

[ Upstream commit 3159d41db3a04330c31ece32f8b29752fc114848 ]

Check before programming the register since it isn't present on
all IPs using this code.

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
index a444fed941849..ad422e00f9fec 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_hwseq.c
@@ -2306,7 +2306,8 @@ void dcn20_fpga_init_hw(struct dc *dc)
 
 	REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_REFDIV, 2);
 	REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_ENABLE, 1);
-	REG_WRITE(REFCLK_CNTL, 0);
+	if (REG(REFCLK_CNTL))
+		REG_WRITE(REFCLK_CNTL, 0);
 	//
 
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 36/50] drm/amd/display: Defer cursor update around VUPDATE for all ASIC

[Sasha Levin]

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit fdfd2a858590d318cfee483bd1c73e00f77533af ]

[Why]
Fixes the following scenario:

- Flip has been prepared sometime during the frame, update pending
- Cursor update happens right when VUPDATE would happen
- OPTC lock acquired, VUPDATE is blocked until next frame
- Flip is delayed potentially infinitely

With the igt@kms_cursor_legacy cursor-vs-flip-legacy test we can
observe nearly *13* frames of delay for some flips on Navi.

[How]
Apply the Raven workaround generically. When close enough to VUPDATE
block cursor updates from occurring from the dc_stream_set_cursor_*
helpers.

This could perhaps be a little smarter by checking if there were
pending updates or flips earlier in the frame on the HUBP side before
applying the delay, but this should be fine for now.

This fixes the kms_cursor_legacy test.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/core/dc_stream.c   | 28 +++++++++----------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
index 6ddbb00ed37a5..8c20e9e907b2f 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
@@ -239,24 +239,24 @@ static void delay_cursor_until_vupdate(struct pipe_ctx *pipe_ctx, struct dc *dc)
 	struct dc_stream_state *stream = pipe_ctx->stream;
 	unsigned int us_per_line;
 
-	if (stream->ctx->asic_id.chip_family == FAMILY_RV &&
-			ASICREV_IS_RAVEN(stream->ctx->asic_id.hw_internal_rev)) {
+	if (!dc->hwss.get_vupdate_offset_from_vsync)
+		return;
 
-		vupdate_line = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
-		if (!dc_stream_get_crtc_position(dc, &stream, 1, &vpos, &nvpos))
-			return;
+	vupdate_line = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
+	if (!dc_stream_get_crtc_position(dc, &stream, 1, &vpos, &nvpos))
+		return;
 
-		if (vpos >= vupdate_line)
-			return;
+	if (vpos >= vupdate_line)
+		return;
 
-		us_per_line = stream->timing.h_total * 10000 / stream->timing.pix_clk_100hz;
-		lines_to_vupdate = vupdate_line - vpos;
-		us_to_vupdate = lines_to_vupdate * us_per_line;
+	us_per_line =
+		stream->timing.h_total * 10000 / stream->timing.pix_clk_100hz;
+	lines_to_vupdate = vupdate_line - vpos;
+	us_to_vupdate = lines_to_vupdate * us_per_line;
 
-		/* 70 us is a conservative estimate of cursor update time*/
-		if (us_to_vupdate < 70)
-			udelay(us_to_vupdate);
-	}
+	/* 70 us is a conservative estimate of cursor update time*/
+	if (us_to_vupdate < 70)
+		udelay(us_to_vupdate);
 #endif
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 36/50] drm/amd/display: Defer cursor update around VUPDATE for all ASIC

[Sasha Levin]

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit fdfd2a858590d318cfee483bd1c73e00f77533af ]

[Why]
Fixes the following scenario:

- Flip has been prepared sometime during the frame, update pending
- Cursor update happens right when VUPDATE would happen
- OPTC lock acquired, VUPDATE is blocked until next frame
- Flip is delayed potentially infinitely

With the igt@kms_cursor_legacy cursor-vs-flip-legacy test we can
observe nearly *13* frames of delay for some flips on Navi.

[How]
Apply the Raven workaround generically. When close enough to VUPDATE
block cursor updates from occurring from the dc_stream_set_cursor_*
helpers.

This could perhaps be a little smarter by checking if there were
pending updates or flips earlier in the frame on the HUBP side before
applying the delay, but this should be fine for now.

This fixes the kms_cursor_legacy test.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/core/dc_stream.c   | 28 +++++++++----------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
index 6ddbb00ed37a5..8c20e9e907b2f 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
@@ -239,24 +239,24 @@ static void delay_cursor_until_vupdate(struct pipe_ctx *pipe_ctx, struct dc *dc)
 	struct dc_stream_state *stream = pipe_ctx->stream;
 	unsigned int us_per_line;
 
-	if (stream->ctx->asic_id.chip_family == FAMILY_RV &&
-			ASICREV_IS_RAVEN(stream->ctx->asic_id.hw_internal_rev)) {
+	if (!dc->hwss.get_vupdate_offset_from_vsync)
+		return;
 
-		vupdate_line = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
-		if (!dc_stream_get_crtc_position(dc, &stream, 1, &vpos, &nvpos))
-			return;
+	vupdate_line = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
+	if (!dc_stream_get_crtc_position(dc, &stream, 1, &vpos, &nvpos))
+		return;
 
-		if (vpos >= vupdate_line)
-			return;
+	if (vpos >= vupdate_line)
+		return;
 
-		us_per_line = stream->timing.h_total * 10000 / stream->timing.pix_clk_100hz;
-		lines_to_vupdate = vupdate_line - vpos;
-		us_to_vupdate = lines_to_vupdate * us_per_line;
+	us_per_line =
+		stream->timing.h_total * 10000 / stream->timing.pix_clk_100hz;
+	lines_to_vupdate = vupdate_line - vpos;
+	us_to_vupdate = lines_to_vupdate * us_per_line;
 
-		/* 70 us is a conservative estimate of cursor update time*/
-		if (us_to_vupdate < 70)
-			udelay(us_to_vupdate);
-	}
+	/* 70 us is a conservative estimate of cursor update time*/
+	if (us_to_vupdate < 70)
+		udelay(us_to_vupdate);
 #endif
 }
 
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.6 36/50] drm/amd/display: Defer cursor update around VUPDATE for all ASIC

[Sasha Levin]

From: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>

[ Upstream commit fdfd2a858590d318cfee483bd1c73e00f77533af ]

[Why]
Fixes the following scenario:

- Flip has been prepared sometime during the frame, update pending
- Cursor update happens right when VUPDATE would happen
- OPTC lock acquired, VUPDATE is blocked until next frame
- Flip is delayed potentially infinitely

With the igt@kms_cursor_legacy cursor-vs-flip-legacy test we can
observe nearly *13* frames of delay for some flips on Navi.

[How]
Apply the Raven workaround generically. When close enough to VUPDATE
block cursor updates from occurring from the dc_stream_set_cursor_*
helpers.

This could perhaps be a little smarter by checking if there were
pending updates or flips earlier in the frame on the HUBP side before
applying the delay, but this should be fine for now.

This fixes the kms_cursor_legacy test.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/core/dc_stream.c   | 28 +++++++++----------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
index 6ddbb00ed37a5..8c20e9e907b2f 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_stream.c
@@ -239,24 +239,24 @@ static void delay_cursor_until_vupdate(struct pipe_ctx *pipe_ctx, struct dc *dc)
 	struct dc_stream_state *stream = pipe_ctx->stream;
 	unsigned int us_per_line;
 
-	if (stream->ctx->asic_id.chip_family == FAMILY_RV &&
-			ASICREV_IS_RAVEN(stream->ctx->asic_id.hw_internal_rev)) {
+	if (!dc->hwss.get_vupdate_offset_from_vsync)
+		return;
 
-		vupdate_line = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
-		if (!dc_stream_get_crtc_position(dc, &stream, 1, &vpos, &nvpos))
-			return;
+	vupdate_line = dc->hwss.get_vupdate_offset_from_vsync(pipe_ctx);
+	if (!dc_stream_get_crtc_position(dc, &stream, 1, &vpos, &nvpos))
+		return;
 
-		if (vpos >= vupdate_line)
-			return;
+	if (vpos >= vupdate_line)
+		return;
 
-		us_per_line = stream->timing.h_total * 10000 / stream->timing.pix_clk_100hz;
-		lines_to_vupdate = vupdate_line - vpos;
-		us_to_vupdate = lines_to_vupdate * us_per_line;
+	us_per_line =
+		stream->timing.h_total * 10000 / stream->timing.pix_clk_100hz;
+	lines_to_vupdate = vupdate_line - vpos;
+	us_to_vupdate = lines_to_vupdate * us_per_line;
 
-		/* 70 us is a conservative estimate of cursor update time*/
-		if (us_to_vupdate < 70)
-			udelay(us_to_vupdate);
-	}
+	/* 70 us is a conservative estimate of cursor update time*/
+	if (us_to_vupdate < 70)
+		udelay(us_to_vupdate);
 #endif
 }
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 37/50] drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1

[Sasha Levin]

From: Sung Lee <sung.lee@amd.com>

[ Upstream commit 668a6741f809f2d15d125cfe2b39661e8f1655ea ]

[WHY]
The downspread percentage was copied over from a previous version
of the display_mode_lib spreadsheet. This value has been updated,
and the previous value is too high to allow for such modes as
4K120hz. The new value is sufficient for such modes.

[HOW]
Update the value in dcn21_resource to match the spreadsheet.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 33d0a176841a5..122d3e734c59a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -250,7 +250,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn2_1_soc = {
 	.dram_channel_width_bytes = 4,
 	.fabric_datapath_to_dcn_data_return_bytes = 32,
 	.dcn_downspread_percent = 0.5,
-	.downspread_percent = 0.5,
+	.downspread_percent = 0.38,
 	.dram_page_open_time_ns = 50.0,
 	.dram_rw_turnaround_time_ns = 17.5,
 	.dram_return_buffer_per_channel_bytes = 8192,
-- 
2.20.1

[PATCH AUTOSEL 5.6 37/50] drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1

[Sasha Levin]

From: Sung Lee <sung.lee@amd.com>

[ Upstream commit 668a6741f809f2d15d125cfe2b39661e8f1655ea ]

[WHY]
The downspread percentage was copied over from a previous version
of the display_mode_lib spreadsheet. This value has been updated,
and the previous value is too high to allow for such modes as
4K120hz. The new value is sufficient for such modes.

[HOW]
Update the value in dcn21_resource to match the spreadsheet.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 33d0a176841a5..122d3e734c59a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -250,7 +250,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn2_1_soc = {
 	.dram_channel_width_bytes = 4,
 	.fabric_datapath_to_dcn_data_return_bytes = 32,
 	.dcn_downspread_percent = 0.5,
-	.downspread_percent = 0.5,
+	.downspread_percent = 0.38,
 	.dram_page_open_time_ns = 50.0,
 	.dram_rw_turnaround_time_ns = 17.5,
 	.dram_return_buffer_per_channel_bytes = 8192,
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 5.6 37/50] drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1

[Sasha Levin]

From: Sung Lee <sung.lee@amd.com>

[ Upstream commit 668a6741f809f2d15d125cfe2b39661e8f1655ea ]

[WHY]
The downspread percentage was copied over from a previous version
of the display_mode_lib spreadsheet. This value has been updated,
and the previous value is too high to allow for such modes as
4K120hz. The new value is sufficient for such modes.

[HOW]
Update the value in dcn21_resource to match the spreadsheet.

Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 33d0a176841a5..122d3e734c59a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -250,7 +250,7 @@ struct _vcs_dpi_soc_bounding_box_st dcn2_1_soc = {
 	.dram_channel_width_bytes = 4,
 	.fabric_datapath_to_dcn_data_return_bytes = 32,
 	.dcn_downspread_percent = 0.5,
-	.downspread_percent = 0.5,
+	.downspread_percent = 0.38,
 	.dram_page_open_time_ns = 50.0,
 	.dram_rw_turnaround_time_ns = 17.5,
 	.dram_return_buffer_per_channel_bytes = 8192,
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 38/50] Fix use after free in get_tree_bdev()

[Sasha Levin]

From: David Howells <dhowells@redhat.com>

[ Upstream commit dd7bc8158b413e0b580c491e8bd18cb91057c7c2 ]

Commit 6fcf0c72e4b9, a fix to get_tree_bdev() put a missing blkdev_put() in
the wrong place, before a warnf() that displays the bdev under
consideration rather after it.

This results in a silent lockup in printk("%pg") called via warnf() from
get_tree_bdev() under some circumstances when there's a race with the
blockdev being frozen.  This can be caused by xfstests/tests/generic/085 in
combination with Lukas Czerner's ext4 mount API conversion patchset.  It
looks like it ought to occur with other users of get_tree_bdev() such as
XFS, but apparently doesn't.

Fix this by switching the order of the lines.

Fixes: 6fcf0c72e4b9 ("vfs: add missing blkdev_put() in get_tree_bdev()")
Reported-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ian Kent <raven@themaw.net>
cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/super.c b/fs/super.c
index cd352530eca90..a288cd60d2aed 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -1302,8 +1302,8 @@ int get_tree_bdev(struct fs_context *fc,
 	mutex_lock(&bdev->bd_fsfreeze_mutex);
 	if (bdev->bd_fsfreeze_count > 0) {
 		mutex_unlock(&bdev->bd_fsfreeze_mutex);
-		blkdev_put(bdev, mode);
 		warnf(fc, "%pg: Can't mount, blockdev is frozen", bdev);
+		blkdev_put(bdev, mode);
 		return -EBUSY;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.6 39/50] drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()

[Sasha Levin]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit 5b5703dbafae74adfbe298a56a81694172caf5e6 ]

v2: removed TODO reminder

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a4e0ae09-a73c-1c62-04ef-3f990d41bea9@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/qxl/qxl_image.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/qxl/qxl_image.c b/drivers/gpu/drm/qxl/qxl_image.c
index 43688ecdd8a04..60ab7151b84dc 100644
--- a/drivers/gpu/drm/qxl/qxl_image.c
+++ b/drivers/gpu/drm/qxl/qxl_image.c
@@ -212,7 +212,8 @@ qxl_image_init_helper(struct qxl_device *qdev,
 		break;
 	default:
 		DRM_ERROR("unsupported image bit depth\n");
-		return -EINVAL; /* TODO: cleanup */
+		qxl_bo_kunmap_atomic_page(qdev, image_bo, ptr);
+		return -EINVAL;
 	}
 	image->u.bitmap.flags = QXL_BITMAP_TOP_DOWN;
 	image->u.bitmap.x = width;
-- 
2.20.1

[PATCH AUTOSEL 5.6 39/50] drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()

[Sasha Levin]

From: Vasily Averin <vvs@virtuozzo.com>

[ Upstream commit 5b5703dbafae74adfbe298a56a81694172caf5e6 ]

v2: removed TODO reminder

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a4e0ae09-a73c-1c62-04ef-3f990d41bea9@virtuozzo.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/qxl/qxl_image.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/qxl/qxl_image.c b/drivers/gpu/drm/qxl/qxl_image.c
index 43688ecdd8a04..60ab7151b84dc 100644
--- a/drivers/gpu/drm/qxl/qxl_image.c
+++ b/drivers/gpu/drm/qxl/qxl_image.c
@@ -212,7 +212,8 @@ qxl_image_init_helper(struct qxl_device *qdev,
 		break;
 	default:
 		DRM_ERROR("unsupported image bit depth\n");
-		return -EINVAL; /* TODO: cleanup */
+		qxl_bo_kunmap_atomic_page(qdev, image_bo, ptr);
+		return -EINVAL;
 	}
 	image->u.bitmap.flags = QXL_BITMAP_TOP_DOWN;
 	image->u.bitmap.x = width;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.6 40/50] ALSA: opti9xx: shut up gcc-10 range warning

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 5ce00760a84848d008554c693ceb6286f4d9c509 ]

gcc-10 points out a few instances of suspicious integer arithmetic
leading to value truncation:

sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure':
sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
  322 |   (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
      |   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask'
  351 |   snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
      |   ^~~~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c: In function 'snd_miro_configure':
sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
  873 |   (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
      |   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask'
 1010 |   snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
      |   ^~~~~~~~~~~~~~~~~~~

These are all harmless here as only the low 8 bit are passed down
anyway. Change the macros to inline functions to make the code
more readable and also avoid the warning.

Strictly speaking those functions also need locking to make the
read/write pair atomic, but it seems unlikely that anyone would
still run into that issue.

Fixes: 1841f613fd2e ("[ALSA] Add snd-miro driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200429190216.85919-1-arnd@arndb.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/isa/opti9xx/miro.c           | 9 ++++++---
 sound/isa/opti9xx/opti92x-ad1848.c | 9 ++++++---
 2 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index e764816a8f7a1..b039429e68717 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -867,10 +867,13 @@ static void snd_miro_write(struct snd_miro *chip, unsigned char reg,
 	spin_unlock_irqrestore(&chip->lock, flags);
 }
 
+static inline void snd_miro_write_mask(struct snd_miro *chip,
+		unsigned char reg, unsigned char value, unsigned char mask)
+{
+	unsigned char oldval = snd_miro_read(chip, reg);
 
-#define snd_miro_write_mask(chip, reg, value, mask)	\
-	snd_miro_write(chip, reg,			\
-		(snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
+	snd_miro_write(chip, reg, (oldval & ~mask) | (value & mask));
+}
 
 /*
  *  Proc Interface
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index d06b29693c85f..0e6d20e491585 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -317,10 +317,13 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
 }
 
 
-#define snd_opti9xx_write_mask(chip, reg, value, mask)	\
-	snd_opti9xx_write(chip, reg,			\
-		(snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
+static inline void snd_opti9xx_write_mask(struct snd_opti9xx *chip,
+		unsigned char reg, unsigned char value, unsigned char mask)
+{
+	unsigned char oldval = snd_opti9xx_read(chip, reg);
 
+	snd_opti9xx_write(chip, reg, (oldval & ~mask) | (value & mask));
+}
 
 static int snd_opti9xx_configure(struct snd_opti9xx *chip,
 					   long port,
-- 
2.20.1

[PATCH AUTOSEL 5.6 40/50] ALSA: opti9xx: shut up gcc-10 range warning

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 5ce00760a84848d008554c693ceb6286f4d9c509 ]

gcc-10 points out a few instances of suspicious integer arithmetic
leading to value truncation:

sound/isa/opti9xx/opti92x-ad1848.c: In function 'snd_opti9xx_configure':
sound/isa/opti9xx/opti92x-ad1848.c:322:43: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_opti9xx_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
  322 |   (snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
      |   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/opti92x-ad1848.c:351:3: note: in expansion of macro 'snd_opti9xx_write_mask'
  351 |   snd_opti9xx_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
      |   ^~~~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c: In function 'snd_miro_configure':
sound/isa/opti9xx/miro.c:873:40: error: overflow in conversion from 'int' to 'unsigned char' changes value from '(int)snd_miro_read(chip, 3) & -256 | 240' to '240' [-Werror=overflow]
  873 |   (snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
      |   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~
sound/isa/opti9xx/miro.c:1010:3: note: in expansion of macro 'snd_miro_write_mask'
 1010 |   snd_miro_write_mask(chip, OPTi9XX_MC_REG(3), 0xf0, 0xff);
      |   ^~~~~~~~~~~~~~~~~~~

These are all harmless here as only the low 8 bit are passed down
anyway. Change the macros to inline functions to make the code
more readable and also avoid the warning.

Strictly speaking those functions also need locking to make the
read/write pair atomic, but it seems unlikely that anyone would
still run into that issue.

Fixes: 1841f613fd2e ("[ALSA] Add snd-miro driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200429190216.85919-1-arnd@arndb.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/isa/opti9xx/miro.c           | 9 ++++++---
 sound/isa/opti9xx/opti92x-ad1848.c | 9 ++++++---
 2 files changed, 12 insertions(+), 6 deletions(-)

diff --git a/sound/isa/opti9xx/miro.c b/sound/isa/opti9xx/miro.c
index e764816a8f7a1..b039429e68717 100644
--- a/sound/isa/opti9xx/miro.c
+++ b/sound/isa/opti9xx/miro.c
@@ -867,10 +867,13 @@ static void snd_miro_write(struct snd_miro *chip, unsigned char reg,
 	spin_unlock_irqrestore(&chip->lock, flags);
 }
 
+static inline void snd_miro_write_mask(struct snd_miro *chip,
+		unsigned char reg, unsigned char value, unsigned char mask)
+{
+	unsigned char oldval = snd_miro_read(chip, reg);
 
-#define snd_miro_write_mask(chip, reg, value, mask)	\
-	snd_miro_write(chip, reg,			\
-		(snd_miro_read(chip, reg) & ~(mask)) | ((value) & (mask)))
+	snd_miro_write(chip, reg, (oldval & ~mask) | (value & mask));
+}
 
 /*
  *  Proc Interface
diff --git a/sound/isa/opti9xx/opti92x-ad1848.c b/sound/isa/opti9xx/opti92x-ad1848.c
index d06b29693c85f..0e6d20e491585 100644
--- a/sound/isa/opti9xx/opti92x-ad1848.c
+++ b/sound/isa/opti9xx/opti92x-ad1848.c
@@ -317,10 +317,13 @@ static void snd_opti9xx_write(struct snd_opti9xx *chip, unsigned char reg,
 }
 
 
-#define snd_opti9xx_write_mask(chip, reg, value, mask)	\
-	snd_opti9xx_write(chip, reg,			\
-		(snd_opti9xx_read(chip, reg) & ~(mask)) | ((value) & (mask)))
+static inline void snd_opti9xx_write_mask(struct snd_opti9xx *chip,
+		unsigned char reg, unsigned char value, unsigned char mask)
+{
+	unsigned char oldval = snd_opti9xx_read(chip, reg);
 
+	snd_opti9xx_write(chip, reg, (oldval & ~mask) | (value & mask));
+}
 
 static int snd_opti9xx_configure(struct snd_opti9xx *chip,
 					   long port,
-- 
2.20.1

[PATCH AUTOSEL 5.6 41/50] i2c: aspeed: Avoid i2c interrupt status clear race condition.

[Sasha Levin]

From: ryan_chen <ryan_chen@aspeedtech.com>

[ Upstream commit c926c87b8e36dcc0ea5c2a0a0227ed4f32d0516a ]

In AST2600 there have a slow peripheral bus between CPU and i2c
controller. Therefore GIC i2c interrupt status clear have delay timing,
when CPU issue write clear i2c controller interrupt status. To avoid
this issue, the driver need have read after write clear at i2c ISR.

Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C")
Signed-off-by: ryan_chen <ryan_chen@aspeedtech.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[wsa: added Fixes tag]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-aspeed.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index a7be6f24450bd..538dfc4110f85 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -603,6 +603,7 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
 	/* Ack all interrupts except for Rx done */
 	writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
 	       bus->base + ASPEED_I2C_INTR_STS_REG);
+	readl(bus->base + ASPEED_I2C_INTR_STS_REG);
 	irq_remaining = irq_received;
 
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
@@ -645,9 +646,11 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
 			irq_received, irq_handled);
 
 	/* Ack Rx done */
-	if (irq_received & ASPEED_I2CD_INTR_RX_DONE)
+	if (irq_received & ASPEED_I2CD_INTR_RX_DONE) {
 		writel(ASPEED_I2CD_INTR_RX_DONE,
 		       bus->base + ASPEED_I2C_INTR_STS_REG);
+		readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+	}
 	spin_unlock(&bus->lock);
 	return irq_remaining ? IRQ_NONE : IRQ_HANDLED;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 41/50] i2c: aspeed: Avoid i2c interrupt status clear race condition.

[Sasha Levin]

From: ryan_chen <ryan_chen@aspeedtech.com>

[ Upstream commit c926c87b8e36dcc0ea5c2a0a0227ed4f32d0516a ]

In AST2600 there have a slow peripheral bus between CPU and i2c
controller. Therefore GIC i2c interrupt status clear have delay timing,
when CPU issue write clear i2c controller interrupt status. To avoid
this issue, the driver need have read after write clear at i2c ISR.

Fixes: f327c686d3ba ("i2c: aspeed: added driver for Aspeed I2C")
Signed-off-by: ryan_chen <ryan_chen@aspeedtech.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[wsa: added Fixes tag]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-aspeed.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index a7be6f24450bd..538dfc4110f85 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -603,6 +603,7 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
 	/* Ack all interrupts except for Rx done */
 	writel(irq_received & ~ASPEED_I2CD_INTR_RX_DONE,
 	       bus->base + ASPEED_I2C_INTR_STS_REG);
+	readl(bus->base + ASPEED_I2C_INTR_STS_REG);
 	irq_remaining = irq_received;
 
 #if IS_ENABLED(CONFIG_I2C_SLAVE)
@@ -645,9 +646,11 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
 			irq_received, irq_handled);
 
 	/* Ack Rx done */
-	if (irq_received & ASPEED_I2CD_INTR_RX_DONE)
+	if (irq_received & ASPEED_I2CD_INTR_RX_DONE) {
 		writel(ASPEED_I2CD_INTR_RX_DONE,
 		       bus->base + ASPEED_I2C_INTR_STS_REG);
+		readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+	}
 	spin_unlock(&bus->lock);
 	return irq_remaining ? IRQ_NONE : IRQ_HANDLED;
 }
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 42/50] fibmap: Warn and return an error in case of block > INT_MAX

[Sasha Levin]

From: Ritesh Harjani <riteshh@linux.ibm.com>

[ Upstream commit b75dfde1212991b24b220c3995101c60a7b8ae74 ]

We better warn the fibmap user and not return a truncated and therefore
an incorrect block map address if the bmap() returned block address
is greater than INT_MAX (since user supplied integer pointer).

It's better to pr_warn() all user of ioctl_fibmap() and return a proper
error code rather than silently letting a FS corruption happen if the
user tries to fiddle around with the returned block map address.

We fix this by returning an error code of -ERANGE and returning 0 as the
block mapping address in case if it is > INT_MAX.

Now iomap_bmap() could be called from either of these two paths.
Either when a user is calling an ioctl_fibmap() interface to get
the block mapping address or by some filesystem via use of bmap()
internal kernel API.
bmap() kernel API is well equipped with handling of u64 addresses.

WARN condition in iomap_bmap_actor() was mainly added to warn all
the fibmap users. But now that we have directly added this warning
for all fibmap users and also made sure to return 0 as block map address
in case if addr > INT_MAX.
So we can now remove this logic from iomap_bmap_actor().

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ioctl.c        | 8 ++++++++
 fs/iomap/fiemap.c | 5 +----
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/fs/ioctl.c b/fs/ioctl.c
index 282d45be6f453..5e80b40bc1b5c 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -55,6 +55,7 @@ EXPORT_SYMBOL(vfs_ioctl);
 static int ioctl_fibmap(struct file *filp, int __user *p)
 {
 	struct inode *inode = file_inode(filp);
+	struct super_block *sb = inode->i_sb;
 	int error, ur_block;
 	sector_t block;
 
@@ -71,6 +72,13 @@ static int ioctl_fibmap(struct file *filp, int __user *p)
 	block = ur_block;
 	error = bmap(inode, &block);
 
+	if (block > INT_MAX) {
+		error = -ERANGE;
+		pr_warn_ratelimited("[%s/%d] FS: %s File: %pD4 would truncate fibmap result\n",
+				    current->comm, task_pid_nr(current),
+				    sb->s_id, filp);
+	}
+
 	if (error)
 		ur_block = 0;
 	else
diff --git a/fs/iomap/fiemap.c b/fs/iomap/fiemap.c
index bccf305ea9ce2..d55e8f491a5e5 100644
--- a/fs/iomap/fiemap.c
+++ b/fs/iomap/fiemap.c
@@ -117,10 +117,7 @@ iomap_bmap_actor(struct inode *inode, loff_t pos, loff_t length,
 
 	if (iomap->type == IOMAP_MAPPED) {
 		addr = (pos - iomap->offset + iomap->addr) >> inode->i_blkbits;
-		if (addr > INT_MAX)
-			WARN(1, "would truncate bmap result\n");
-		else
-			*bno = addr;
+		*bno = addr;
 	}
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.6 43/50] block: remove the bd_openers checks in blk_drop_partitions

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit 10c70d95c0f2f9a6f52d0e33243d2877370cef51 ]

When replacing the bd_super check with a bd_openers I followed a logical
conclusion, which turns out to be utterly wrong.  When a block device has
bd_super sets it has a mount file system on it (although not every
mounted file system sets bd_super), but that also implies it doesn't even
have partitions to start with.

So instead of trying to come up with a logical check for all openers,
just remove the check entirely.

Fixes: d3ef5536274f ("block: fix busy device checking in blk_drop_partitions")
Fixes: cb6b771b05c3 ("block: fix busy device checking in blk_drop_partitions again")
Reported-by: Michal Koutný <mkoutny@suse.com>
Reported-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/partition-generic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/block/partition-generic.c b/block/partition-generic.c
index ebe4c2e9834bd..8a7906fa96fd6 100644
--- a/block/partition-generic.c
+++ b/block/partition-generic.c
@@ -468,7 +468,7 @@ int blk_drop_partitions(struct gendisk *disk, struct block_device *bdev)
 
 	if (!disk_part_scan_enabled(disk))
 		return 0;
-	if (bdev->bd_part_count || bdev->bd_openers > 1)
+	if (bdev->bd_part_count)
 		return -EBUSY;
 	res = invalidate_partition(disk, 0);
 	if (res)
-- 
2.20.1

[PATCH AUTOSEL 5.6 44/50] arm64: vdso: Add -fasynchronous-unwind-tables to cflags

[Sasha Levin]

From: Vincenzo Frascino <vincenzo.frascino@arm.com>

[ Upstream commit 1578e5d03112e3e9d37e1c4d95b6dfb734c73955 ]

On arm64 linux gcc uses -fasynchronous-unwind-tables -funwind-tables
by default since gcc-8, so now the de facto platform ABI is to allow
unwinding from async signal handlers.

However on bare metal targets (aarch64-none-elf), and on old gcc,
async and sync unwind tables are not enabled by default to avoid
runtime memory costs.

This means if linux is built with a baremetal toolchain the vdso.so
may not have unwind tables which breaks the gcc platform ABI guarantee
in userspace.

Add -fasynchronous-unwind-tables explicitly to the vgettimeofday.o
cflags to address the ABI change.

Fixes: 28b1a824a4f4 ("arm64: vdso: Substitute gettimeofday() with C implementation")
Cc: Will Deacon <will@kernel.org>
Reported-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/vdso/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index dd2514bb1511f..3862cad2410cf 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -32,7 +32,7 @@ UBSAN_SANITIZE			:= n
 OBJECT_FILES_NON_STANDARD	:= y
 KCOV_INSTRUMENT			:= n
 
-CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny
+CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny -fasynchronous-unwind-tables
 
 ifneq ($(c-gettimeofday-y),)
   CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y)
-- 
2.20.1

[PATCH AUTOSEL 5.6 44/50] arm64: vdso: Add -fasynchronous-unwind-tables to cflags

[Sasha Levin]

From: Vincenzo Frascino <vincenzo.frascino@arm.com>

[ Upstream commit 1578e5d03112e3e9d37e1c4d95b6dfb734c73955 ]

On arm64 linux gcc uses -fasynchronous-unwind-tables -funwind-tables
by default since gcc-8, so now the de facto platform ABI is to allow
unwinding from async signal handlers.

However on bare metal targets (aarch64-none-elf), and on old gcc,
async and sync unwind tables are not enabled by default to avoid
runtime memory costs.

This means if linux is built with a baremetal toolchain the vdso.so
may not have unwind tables which breaks the gcc platform ABI guarantee
in userspace.

Add -fasynchronous-unwind-tables explicitly to the vgettimeofday.o
cflags to address the ABI change.

Fixes: 28b1a824a4f4 ("arm64: vdso: Substitute gettimeofday() with C implementation")
Cc: Will Deacon <will@kernel.org>
Reported-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/vdso/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/vdso/Makefile b/arch/arm64/kernel/vdso/Makefile
index dd2514bb1511f..3862cad2410cf 100644
--- a/arch/arm64/kernel/vdso/Makefile
+++ b/arch/arm64/kernel/vdso/Makefile
@@ -32,7 +32,7 @@ UBSAN_SANITIZE			:= n
 OBJECT_FILES_NON_STANDARD	:= y
 KCOV_INSTRUMENT			:= n
 
-CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny
+CFLAGS_vgettimeofday.o = -O2 -mcmodel=tiny -fasynchronous-unwind-tables
 
 ifneq ($(c-gettimeofday-y),)
   CFLAGS_vgettimeofday.o += -include $(c-gettimeofday-y)
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.6 45/50] io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()

[Sasha Levin]

From: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>

[ Upstream commit 3fd44c86711f71156b586c22b0495c58f69358bb ]

While working on to make io_uring sqpoll mode support syscalls that need
struct files_struct, I got cpu soft lockup in io_ring_ctx_wait_and_kill(),

    while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
        cpu_relax();

above loop never has an chance to exit, it's because preempt isn't enabled
in the kernel, and the context calling io_ring_ctx_wait_and_kill() and
io_sq_thread() run in the same cpu, if io_sq_thread calls a cond_resched()
yield cpu and another context enters above loop, then io_sq_thread() will
always in runqueue and never exit.

Use cond_resched() can fix this issue.

 Reported-by: syzbot+66243bb7126c410cefe6@syzkaller.appspotmail.com
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/io_uring.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/io_uring.c b/fs/io_uring.c
index a46de2cfc28e8..b5ade01379029 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -6449,7 +6449,7 @@ static void io_ring_ctx_wait_and_kill(struct io_ring_ctx *ctx)
 	 * it could cause shutdown to hang.
 	 */
 	while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
-		cpu_relax();
+		cond_resched();
 
 	io_kill_timeouts(ctx);
 	io_poll_remove_all(ctx);
-- 
2.20.1

[PATCH AUTOSEL 5.6 46/50] iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system

[Sasha Levin]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

[ Upstream commit b74aa02d7a30ee5e262072a7d6e8deff10b37924 ]

Currently, system fails to boot because the legacy interrupt remapping
mode does not enable 128-bit IRTE (GA), which is required for x2APIC
support.

Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with
kernel option amd_iommu_intr=legacy instead. The initialization
logic will check GASup and automatically fallback to using
AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported.

Fixes: 3928aa3f5775 ("iommu/amd: Detect and enable guest vAPIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1587562202-14183-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 6be3853a5d978..2b9a67ecc6ac4 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -2936,7 +2936,7 @@ static int __init parse_amd_iommu_intr(char *str)
 {
 	for (; *str; ++str) {
 		if (strncmp(str, "legacy", 6) == 0) {
-			amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY;
+			amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY_GA;
 			break;
 		}
 		if (strncmp(str, "vapic", 5) == 0) {
-- 
2.20.1

[PATCH AUTOSEL 5.6 46/50] iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system

[Sasha Levin]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

[ Upstream commit b74aa02d7a30ee5e262072a7d6e8deff10b37924 ]

Currently, system fails to boot because the legacy interrupt remapping
mode does not enable 128-bit IRTE (GA), which is required for x2APIC
support.

Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with
kernel option amd_iommu_intr=legacy instead. The initialization
logic will check GASup and automatically fallback to using
AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported.

Fixes: 3928aa3f5775 ("iommu/amd: Detect and enable guest vAPIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1587562202-14183-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 6be3853a5d978..2b9a67ecc6ac4 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -2936,7 +2936,7 @@ static int __init parse_amd_iommu_intr(char *str)
 {
 	for (; *str; ++str) {
 		if (strncmp(str, "legacy", 6) == 0) {
-			amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY;
+			amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY_GA;
 			break;
 		}
 		if (strncmp(str, "vapic", 5) == 0) {
-- 
2.20.1

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu