From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 31/34] target/arm: Restrict TCG cpus to TCG accel
Date: Mon, 11 May 2020 14:34:02 +0100 [thread overview]
Message-ID: <20200511133405.5275-32-peter.maydell@linaro.org> (raw)
In-Reply-To: <20200511133405.5275-1-peter.maydell@linaro.org>
From: Philippe Mathieu-Daudé <philmd@redhat.com>
A KVM-only build won't be able to run TCG cpus.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200504172448.9402-6-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/cpu.c | 634 -------------------------------------
target/arm/cpu_tcg.c | 664 +++++++++++++++++++++++++++++++++++++++
target/arm/Makefile.objs | 1 +
3 files changed, 665 insertions(+), 634 deletions(-)
create mode 100644 target/arm/cpu_tcg.c
diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index a10f8c40447..3794f0dbc4f 100644
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -574,32 +574,6 @@ bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
return true;
}
-#if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
-static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
-{
- CPUClass *cc = CPU_GET_CLASS(cs);
- ARMCPU *cpu = ARM_CPU(cs);
- CPUARMState *env = &cpu->env;
- bool ret = false;
-
- /*
- * ARMv7-M interrupt masking works differently than -A or -R.
- * There is no FIQ/IRQ distinction. Instead of I and F bits
- * masking FIQ and IRQ interrupts, an exception is taken only
- * if it is higher priority than the current execution priority
- * (which depends on state like BASEPRI, FAULTMASK and the
- * currently active exception).
- */
- if (interrupt_request & CPU_INTERRUPT_HARD
- && (armv7m_nvic_can_take_pending_exception(env->nvic))) {
- cs->exception_index = EXCP_IRQ;
- cc->do_interrupt(cs);
- ret = true;
- }
- return ret;
-}
-#endif
-
void arm_cpu_update_virq(ARMCPU *cpu)
{
/*
@@ -1820,406 +1794,6 @@ static ObjectClass *arm_cpu_class_by_name(const char *cpu_model)
/* CPU models. These are not needed for the AArch64 linux-user build. */
#if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
-static void arm926_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "arm,arm926";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
- set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN);
- cpu->midr = 0x41069265;
- cpu->reset_fpsid = 0x41011090;
- cpu->ctr = 0x1dd20d2;
- cpu->reset_sctlr = 0x00090078;
-
- /*
- * ARMv5 does not have the ID_ISAR registers, but we can still
- * set the field to indicate Jazelle support within QEMU.
- */
- cpu->isar.id_isar1 = FIELD_DP32(cpu->isar.id_isar1, ID_ISAR1, JAZELLE, 1);
- /*
- * Similarly, we need to set MVFR0 fields to enable vfp and short vector
- * support even though ARMv5 doesn't have this register.
- */
- cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1);
- cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSP, 1);
- cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPDP, 1);
-}
-
-static void arm946_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "arm,arm946";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_PMSA);
- set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
- cpu->midr = 0x41059461;
- cpu->ctr = 0x0f004006;
- cpu->reset_sctlr = 0x00000078;
-}
-
-static void arm1026_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "arm,arm1026";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_AUXCR);
- set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
- set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN);
- cpu->midr = 0x4106a262;
- cpu->reset_fpsid = 0x410110a0;
- cpu->ctr = 0x1dd20d2;
- cpu->reset_sctlr = 0x00090078;
- cpu->reset_auxcr = 1;
-
- /*
- * ARMv5 does not have the ID_ISAR registers, but we can still
- * set the field to indicate Jazelle support within QEMU.
- */
- cpu->isar.id_isar1 = FIELD_DP32(cpu->isar.id_isar1, ID_ISAR1, JAZELLE, 1);
- /*
- * Similarly, we need to set MVFR0 fields to enable vfp and short vector
- * support even though ARMv5 doesn't have this register.
- */
- cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1);
- cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSP, 1);
- cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPDP, 1);
-
- {
- /* The 1026 had an IFAR at c6,c0,0,1 rather than the ARMv6 c6,c0,0,2 */
- ARMCPRegInfo ifar = {
- .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1,
- .access = PL1_RW,
- .fieldoffset = offsetof(CPUARMState, cp15.ifar_ns),
- .resetvalue = 0
- };
- define_one_arm_cp_reg(cpu, &ifar);
- }
-}
-
-static void arm1136_r2_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
- /*
- * What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an
- * older core than plain "arm1136". In particular this does not
- * have the v6K features.
- * These ID register values are correct for 1136 but may be wrong
- * for 1136_r2 (in particular r0p2 does not actually implement most
- * of the ID registers).
- */
-
- cpu->dtb_compatible = "arm,arm1136";
- set_feature(&cpu->env, ARM_FEATURE_V6);
- set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
- set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
- set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
- cpu->midr = 0x4107b362;
- cpu->reset_fpsid = 0x410120b4;
- cpu->isar.mvfr0 = 0x11111111;
- cpu->isar.mvfr1 = 0x00000000;
- cpu->ctr = 0x1dd20d2;
- cpu->reset_sctlr = 0x00050078;
- cpu->id_pfr0 = 0x111;
- cpu->id_pfr1 = 0x1;
- cpu->isar.id_dfr0 = 0x2;
- cpu->id_afr0 = 0x3;
- cpu->isar.id_mmfr0 = 0x01130003;
- cpu->isar.id_mmfr1 = 0x10030302;
- cpu->isar.id_mmfr2 = 0x01222110;
- cpu->isar.id_isar0 = 0x00140011;
- cpu->isar.id_isar1 = 0x12002111;
- cpu->isar.id_isar2 = 0x11231111;
- cpu->isar.id_isar3 = 0x01102131;
- cpu->isar.id_isar4 = 0x141;
- cpu->reset_auxcr = 7;
-}
-
-static void arm1136_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "arm,arm1136";
- set_feature(&cpu->env, ARM_FEATURE_V6K);
- set_feature(&cpu->env, ARM_FEATURE_V6);
- set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
- set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
- set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
- cpu->midr = 0x4117b363;
- cpu->reset_fpsid = 0x410120b4;
- cpu->isar.mvfr0 = 0x11111111;
- cpu->isar.mvfr1 = 0x00000000;
- cpu->ctr = 0x1dd20d2;
- cpu->reset_sctlr = 0x00050078;
- cpu->id_pfr0 = 0x111;
- cpu->id_pfr1 = 0x1;
- cpu->isar.id_dfr0 = 0x2;
- cpu->id_afr0 = 0x3;
- cpu->isar.id_mmfr0 = 0x01130003;
- cpu->isar.id_mmfr1 = 0x10030302;
- cpu->isar.id_mmfr2 = 0x01222110;
- cpu->isar.id_isar0 = 0x00140011;
- cpu->isar.id_isar1 = 0x12002111;
- cpu->isar.id_isar2 = 0x11231111;
- cpu->isar.id_isar3 = 0x01102131;
- cpu->isar.id_isar4 = 0x141;
- cpu->reset_auxcr = 7;
-}
-
-static void arm1176_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "arm,arm1176";
- set_feature(&cpu->env, ARM_FEATURE_V6K);
- set_feature(&cpu->env, ARM_FEATURE_VAPA);
- set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
- set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
- set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
- set_feature(&cpu->env, ARM_FEATURE_EL3);
- cpu->midr = 0x410fb767;
- cpu->reset_fpsid = 0x410120b5;
- cpu->isar.mvfr0 = 0x11111111;
- cpu->isar.mvfr1 = 0x00000000;
- cpu->ctr = 0x1dd20d2;
- cpu->reset_sctlr = 0x00050078;
- cpu->id_pfr0 = 0x111;
- cpu->id_pfr1 = 0x11;
- cpu->isar.id_dfr0 = 0x33;
- cpu->id_afr0 = 0;
- cpu->isar.id_mmfr0 = 0x01130003;
- cpu->isar.id_mmfr1 = 0x10030302;
- cpu->isar.id_mmfr2 = 0x01222100;
- cpu->isar.id_isar0 = 0x0140011;
- cpu->isar.id_isar1 = 0x12002111;
- cpu->isar.id_isar2 = 0x11231121;
- cpu->isar.id_isar3 = 0x01102131;
- cpu->isar.id_isar4 = 0x01141;
- cpu->reset_auxcr = 7;
-}
-
-static void arm11mpcore_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "arm,arm11mpcore";
- set_feature(&cpu->env, ARM_FEATURE_V6K);
- set_feature(&cpu->env, ARM_FEATURE_VAPA);
- set_feature(&cpu->env, ARM_FEATURE_MPIDR);
- set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
- cpu->midr = 0x410fb022;
- cpu->reset_fpsid = 0x410120b4;
- cpu->isar.mvfr0 = 0x11111111;
- cpu->isar.mvfr1 = 0x00000000;
- cpu->ctr = 0x1d192992; /* 32K icache 32K dcache */
- cpu->id_pfr0 = 0x111;
- cpu->id_pfr1 = 0x1;
- cpu->isar.id_dfr0 = 0;
- cpu->id_afr0 = 0x2;
- cpu->isar.id_mmfr0 = 0x01100103;
- cpu->isar.id_mmfr1 = 0x10020302;
- cpu->isar.id_mmfr2 = 0x01222000;
- cpu->isar.id_isar0 = 0x00100011;
- cpu->isar.id_isar1 = 0x12002111;
- cpu->isar.id_isar2 = 0x11221011;
- cpu->isar.id_isar3 = 0x01102131;
- cpu->isar.id_isar4 = 0x141;
- cpu->reset_auxcr = 1;
-}
-
-static void cortex_m0_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
- set_feature(&cpu->env, ARM_FEATURE_V6);
- set_feature(&cpu->env, ARM_FEATURE_M);
-
- cpu->midr = 0x410cc200;
-}
-
-static void cortex_m3_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
- set_feature(&cpu->env, ARM_FEATURE_V7);
- set_feature(&cpu->env, ARM_FEATURE_M);
- set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
- cpu->midr = 0x410fc231;
- cpu->pmsav7_dregion = 8;
- cpu->id_pfr0 = 0x00000030;
- cpu->id_pfr1 = 0x00000200;
- cpu->isar.id_dfr0 = 0x00100000;
- cpu->id_afr0 = 0x00000000;
- cpu->isar.id_mmfr0 = 0x00000030;
- cpu->isar.id_mmfr1 = 0x00000000;
- cpu->isar.id_mmfr2 = 0x00000000;
- cpu->isar.id_mmfr3 = 0x00000000;
- cpu->isar.id_isar0 = 0x01141110;
- cpu->isar.id_isar1 = 0x02111000;
- cpu->isar.id_isar2 = 0x21112231;
- cpu->isar.id_isar3 = 0x01111110;
- cpu->isar.id_isar4 = 0x01310102;
- cpu->isar.id_isar5 = 0x00000000;
- cpu->isar.id_isar6 = 0x00000000;
-}
-
-static void cortex_m4_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- set_feature(&cpu->env, ARM_FEATURE_V7);
- set_feature(&cpu->env, ARM_FEATURE_M);
- set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
- set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
- cpu->midr = 0x410fc240; /* r0p0 */
- cpu->pmsav7_dregion = 8;
- cpu->isar.mvfr0 = 0x10110021;
- cpu->isar.mvfr1 = 0x11000011;
- cpu->isar.mvfr2 = 0x00000000;
- cpu->id_pfr0 = 0x00000030;
- cpu->id_pfr1 = 0x00000200;
- cpu->isar.id_dfr0 = 0x00100000;
- cpu->id_afr0 = 0x00000000;
- cpu->isar.id_mmfr0 = 0x00000030;
- cpu->isar.id_mmfr1 = 0x00000000;
- cpu->isar.id_mmfr2 = 0x00000000;
- cpu->isar.id_mmfr3 = 0x00000000;
- cpu->isar.id_isar0 = 0x01141110;
- cpu->isar.id_isar1 = 0x02111000;
- cpu->isar.id_isar2 = 0x21112231;
- cpu->isar.id_isar3 = 0x01111110;
- cpu->isar.id_isar4 = 0x01310102;
- cpu->isar.id_isar5 = 0x00000000;
- cpu->isar.id_isar6 = 0x00000000;
-}
-
-static void cortex_m7_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- set_feature(&cpu->env, ARM_FEATURE_V7);
- set_feature(&cpu->env, ARM_FEATURE_M);
- set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
- set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
- cpu->midr = 0x411fc272; /* r1p2 */
- cpu->pmsav7_dregion = 8;
- cpu->isar.mvfr0 = 0x10110221;
- cpu->isar.mvfr1 = 0x12000011;
- cpu->isar.mvfr2 = 0x00000040;
- cpu->id_pfr0 = 0x00000030;
- cpu->id_pfr1 = 0x00000200;
- cpu->isar.id_dfr0 = 0x00100000;
- cpu->id_afr0 = 0x00000000;
- cpu->isar.id_mmfr0 = 0x00100030;
- cpu->isar.id_mmfr1 = 0x00000000;
- cpu->isar.id_mmfr2 = 0x01000000;
- cpu->isar.id_mmfr3 = 0x00000000;
- cpu->isar.id_isar0 = 0x01101110;
- cpu->isar.id_isar1 = 0x02112000;
- cpu->isar.id_isar2 = 0x20232231;
- cpu->isar.id_isar3 = 0x01111131;
- cpu->isar.id_isar4 = 0x01310132;
- cpu->isar.id_isar5 = 0x00000000;
- cpu->isar.id_isar6 = 0x00000000;
-}
-
-static void cortex_m33_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- set_feature(&cpu->env, ARM_FEATURE_V8);
- set_feature(&cpu->env, ARM_FEATURE_M);
- set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
- set_feature(&cpu->env, ARM_FEATURE_M_SECURITY);
- set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
- cpu->midr = 0x410fd213; /* r0p3 */
- cpu->pmsav7_dregion = 16;
- cpu->sau_sregion = 8;
- cpu->isar.mvfr0 = 0x10110021;
- cpu->isar.mvfr1 = 0x11000011;
- cpu->isar.mvfr2 = 0x00000040;
- cpu->id_pfr0 = 0x00000030;
- cpu->id_pfr1 = 0x00000210;
- cpu->isar.id_dfr0 = 0x00200000;
- cpu->id_afr0 = 0x00000000;
- cpu->isar.id_mmfr0 = 0x00101F40;
- cpu->isar.id_mmfr1 = 0x00000000;
- cpu->isar.id_mmfr2 = 0x01000000;
- cpu->isar.id_mmfr3 = 0x00000000;
- cpu->isar.id_isar0 = 0x01101110;
- cpu->isar.id_isar1 = 0x02212000;
- cpu->isar.id_isar2 = 0x20232232;
- cpu->isar.id_isar3 = 0x01111131;
- cpu->isar.id_isar4 = 0x01310132;
- cpu->isar.id_isar5 = 0x00000000;
- cpu->isar.id_isar6 = 0x00000000;
- cpu->clidr = 0x00000000;
- cpu->ctr = 0x8000c000;
-}
-
-static void arm_v7m_class_init(ObjectClass *oc, void *data)
-{
- ARMCPUClass *acc = ARM_CPU_CLASS(oc);
- CPUClass *cc = CPU_CLASS(oc);
-
- acc->info = data;
-#ifndef CONFIG_USER_ONLY
- cc->do_interrupt = arm_v7m_cpu_do_interrupt;
-#endif
-
- cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt;
-}
-
-static const ARMCPRegInfo cortexr5_cp_reginfo[] = {
- /* Dummy the TCM region regs for the moment */
- { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0,
- .access = PL1_RW, .type = ARM_CP_CONST },
- { .name = "BTCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1,
- .access = PL1_RW, .type = ARM_CP_CONST },
- { .name = "DCACHE_INVAL", .cp = 15, .opc1 = 0, .crn = 15, .crm = 5,
- .opc2 = 0, .access = PL1_W, .type = ARM_CP_NOP },
- REGINFO_SENTINEL
-};
-
-static void cortex_r5_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- set_feature(&cpu->env, ARM_FEATURE_V7);
- set_feature(&cpu->env, ARM_FEATURE_V7MP);
- set_feature(&cpu->env, ARM_FEATURE_PMSA);
- set_feature(&cpu->env, ARM_FEATURE_PMU);
- cpu->midr = 0x411fc153; /* r1p3 */
- cpu->id_pfr0 = 0x0131;
- cpu->id_pfr1 = 0x001;
- cpu->isar.id_dfr0 = 0x010400;
- cpu->id_afr0 = 0x0;
- cpu->isar.id_mmfr0 = 0x0210030;
- cpu->isar.id_mmfr1 = 0x00000000;
- cpu->isar.id_mmfr2 = 0x01200000;
- cpu->isar.id_mmfr3 = 0x0211;
- cpu->isar.id_isar0 = 0x02101111;
- cpu->isar.id_isar1 = 0x13112111;
- cpu->isar.id_isar2 = 0x21232141;
- cpu->isar.id_isar3 = 0x01112131;
- cpu->isar.id_isar4 = 0x0010142;
- cpu->isar.id_isar5 = 0x0;
- cpu->isar.id_isar6 = 0x0;
- cpu->mp_is_up = true;
- cpu->pmsav7_dregion = 16;
- define_arm_cp_regs(cpu, cortexr5_cp_reginfo);
-}
-
-static void cortex_r5f_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cortex_r5_initfn(obj);
- cpu->isar.mvfr0 = 0x10110221;
- cpu->isar.mvfr1 = 0x00000011;
-}
-
static const ARMCPRegInfo cortexa8_cp_reginfo[] = {
{ .name = "L2LOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 0,
.access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 },
@@ -2446,174 +2020,6 @@ static void cortex_a15_initfn(Object *obj)
define_arm_cp_regs(cpu, cortexa15_cp_reginfo);
}
-static void ti925t_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
- set_feature(&cpu->env, ARM_FEATURE_V4T);
- set_feature(&cpu->env, ARM_FEATURE_OMAPCP);
- cpu->midr = ARM_CPUID_TI925T;
- cpu->ctr = 0x5109149;
- cpu->reset_sctlr = 0x00000070;
-}
-
-static void sa1100_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "intel,sa1100";
- set_feature(&cpu->env, ARM_FEATURE_STRONGARM);
- set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
- cpu->midr = 0x4401A11B;
- cpu->reset_sctlr = 0x00000070;
-}
-
-static void sa1110_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
- set_feature(&cpu->env, ARM_FEATURE_STRONGARM);
- set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
- cpu->midr = 0x6901B119;
- cpu->reset_sctlr = 0x00000070;
-}
-
-static void pxa250_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "marvell,xscale";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- cpu->midr = 0x69052100;
- cpu->ctr = 0xd172172;
- cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa255_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "marvell,xscale";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- cpu->midr = 0x69052d00;
- cpu->ctr = 0xd172172;
- cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa260_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "marvell,xscale";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- cpu->midr = 0x69052903;
- cpu->ctr = 0xd172172;
- cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa261_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "marvell,xscale";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- cpu->midr = 0x69052d05;
- cpu->ctr = 0xd172172;
- cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa262_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "marvell,xscale";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- cpu->midr = 0x69052d06;
- cpu->ctr = 0xd172172;
- cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270a0_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "marvell,xscale";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = 0x69054110;
- cpu->ctr = 0xd172172;
- cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270a1_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "marvell,xscale";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = 0x69054111;
- cpu->ctr = 0xd172172;
- cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270b0_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "marvell,xscale";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = 0x69054112;
- cpu->ctr = 0xd172172;
- cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270b1_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "marvell,xscale";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = 0x69054113;
- cpu->ctr = 0xd172172;
- cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270c0_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "marvell,xscale";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = 0x69054114;
- cpu->ctr = 0xd172172;
- cpu->reset_sctlr = 0x00000078;
-}
-
-static void pxa270c5_initfn(Object *obj)
-{
- ARMCPU *cpu = ARM_CPU(obj);
-
- cpu->dtb_compatible = "marvell,xscale";
- set_feature(&cpu->env, ARM_FEATURE_V5);
- set_feature(&cpu->env, ARM_FEATURE_XSCALE);
- set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
- cpu->midr = 0x69054117;
- cpu->ctr = 0xd172172;
- cpu->reset_sctlr = 0x00000078;
-}
-
#ifndef TARGET_AARCH64
/* -cpu max: if KVM is enabled, like -cpu host (best possible with this host);
* otherwise, a CPU with as many features enabled as our emulation supports.
@@ -2688,50 +2094,10 @@ static void arm_max_initfn(Object *obj)
static const ARMCPUInfo arm_cpus[] = {
#if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
- { .name = "arm926", .initfn = arm926_initfn },
- { .name = "arm946", .initfn = arm946_initfn },
- { .name = "arm1026", .initfn = arm1026_initfn },
- /*
- * What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an
- * older core than plain "arm1136". In particular this does not
- * have the v6K features.
- */
- { .name = "arm1136-r2", .initfn = arm1136_r2_initfn },
- { .name = "arm1136", .initfn = arm1136_initfn },
- { .name = "arm1176", .initfn = arm1176_initfn },
- { .name = "arm11mpcore", .initfn = arm11mpcore_initfn },
- { .name = "cortex-m0", .initfn = cortex_m0_initfn,
- .class_init = arm_v7m_class_init },
- { .name = "cortex-m3", .initfn = cortex_m3_initfn,
- .class_init = arm_v7m_class_init },
- { .name = "cortex-m4", .initfn = cortex_m4_initfn,
- .class_init = arm_v7m_class_init },
- { .name = "cortex-m7", .initfn = cortex_m7_initfn,
- .class_init = arm_v7m_class_init },
- { .name = "cortex-m33", .initfn = cortex_m33_initfn,
- .class_init = arm_v7m_class_init },
- { .name = "cortex-r5", .initfn = cortex_r5_initfn },
- { .name = "cortex-r5f", .initfn = cortex_r5f_initfn },
{ .name = "cortex-a7", .initfn = cortex_a7_initfn },
{ .name = "cortex-a8", .initfn = cortex_a8_initfn },
{ .name = "cortex-a9", .initfn = cortex_a9_initfn },
{ .name = "cortex-a15", .initfn = cortex_a15_initfn },
- { .name = "ti925t", .initfn = ti925t_initfn },
- { .name = "sa1100", .initfn = sa1100_initfn },
- { .name = "sa1110", .initfn = sa1110_initfn },
- { .name = "pxa250", .initfn = pxa250_initfn },
- { .name = "pxa255", .initfn = pxa255_initfn },
- { .name = "pxa260", .initfn = pxa260_initfn },
- { .name = "pxa261", .initfn = pxa261_initfn },
- { .name = "pxa262", .initfn = pxa262_initfn },
- /* "pxa270" is an alias for "pxa270-a0" */
- { .name = "pxa270", .initfn = pxa270a0_initfn },
- { .name = "pxa270-a0", .initfn = pxa270a0_initfn },
- { .name = "pxa270-a1", .initfn = pxa270a1_initfn },
- { .name = "pxa270-b0", .initfn = pxa270b0_initfn },
- { .name = "pxa270-b1", .initfn = pxa270b1_initfn },
- { .name = "pxa270-c0", .initfn = pxa270c0_initfn },
- { .name = "pxa270-c5", .initfn = pxa270c5_initfn },
#ifndef TARGET_AARCH64
{ .name = "max", .initfn = arm_max_initfn },
#endif
diff --git a/target/arm/cpu_tcg.c b/target/arm/cpu_tcg.c
new file mode 100644
index 00000000000..591baef5351
--- /dev/null
+++ b/target/arm/cpu_tcg.c
@@ -0,0 +1,664 @@
+/*
+ * QEMU ARM TCG CPUs.
+ *
+ * Copyright (c) 2012 SUSE LINUX Products GmbH
+ *
+ * This code is licensed under the GNU GPL v2 or later.
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "cpu.h"
+#include "internals.h"
+
+/* CPU models. These are not needed for the AArch64 linux-user build. */
+#if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64)
+
+static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request)
+{
+ CPUClass *cc = CPU_GET_CLASS(cs);
+ ARMCPU *cpu = ARM_CPU(cs);
+ CPUARMState *env = &cpu->env;
+ bool ret = false;
+
+ /*
+ * ARMv7-M interrupt masking works differently than -A or -R.
+ * There is no FIQ/IRQ distinction. Instead of I and F bits
+ * masking FIQ and IRQ interrupts, an exception is taken only
+ * if it is higher priority than the current execution priority
+ * (which depends on state like BASEPRI, FAULTMASK and the
+ * currently active exception).
+ */
+ if (interrupt_request & CPU_INTERRUPT_HARD
+ && (armv7m_nvic_can_take_pending_exception(env->nvic))) {
+ cs->exception_index = EXCP_IRQ;
+ cc->do_interrupt(cs);
+ ret = true;
+ }
+ return ret;
+}
+
+static void arm926_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "arm,arm926";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN);
+ cpu->midr = 0x41069265;
+ cpu->reset_fpsid = 0x41011090;
+ cpu->ctr = 0x1dd20d2;
+ cpu->reset_sctlr = 0x00090078;
+
+ /*
+ * ARMv5 does not have the ID_ISAR registers, but we can still
+ * set the field to indicate Jazelle support within QEMU.
+ */
+ cpu->isar.id_isar1 = FIELD_DP32(cpu->isar.id_isar1, ID_ISAR1, JAZELLE, 1);
+ /*
+ * Similarly, we need to set MVFR0 fields to enable vfp and short vector
+ * support even though ARMv5 doesn't have this register.
+ */
+ cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1);
+ cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSP, 1);
+ cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPDP, 1);
+}
+
+static void arm946_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "arm,arm946";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_PMSA);
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ cpu->midr = 0x41059461;
+ cpu->ctr = 0x0f004006;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void arm1026_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "arm,arm1026";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_AUXCR);
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN);
+ cpu->midr = 0x4106a262;
+ cpu->reset_fpsid = 0x410110a0;
+ cpu->ctr = 0x1dd20d2;
+ cpu->reset_sctlr = 0x00090078;
+ cpu->reset_auxcr = 1;
+
+ /*
+ * ARMv5 does not have the ID_ISAR registers, but we can still
+ * set the field to indicate Jazelle support within QEMU.
+ */
+ cpu->isar.id_isar1 = FIELD_DP32(cpu->isar.id_isar1, ID_ISAR1, JAZELLE, 1);
+ /*
+ * Similarly, we need to set MVFR0 fields to enable vfp and short vector
+ * support even though ARMv5 doesn't have this register.
+ */
+ cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSHVEC, 1);
+ cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPSP, 1);
+ cpu->isar.mvfr0 = FIELD_DP32(cpu->isar.mvfr0, MVFR0, FPDP, 1);
+
+ {
+ /* The 1026 had an IFAR at c6,c0,0,1 rather than the ARMv6 c6,c0,0,2 */
+ ARMCPRegInfo ifar = {
+ .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1,
+ .access = PL1_RW,
+ .fieldoffset = offsetof(CPUARMState, cp15.ifar_ns),
+ .resetvalue = 0
+ };
+ define_one_arm_cp_reg(cpu, &ifar);
+ }
+}
+
+static void arm1136_r2_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+ /*
+ * What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an
+ * older core than plain "arm1136". In particular this does not
+ * have the v6K features.
+ * These ID register values are correct for 1136 but may be wrong
+ * for 1136_r2 (in particular r0p2 does not actually implement most
+ * of the ID registers).
+ */
+
+ cpu->dtb_compatible = "arm,arm1136";
+ set_feature(&cpu->env, ARM_FEATURE_V6);
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
+ cpu->midr = 0x4107b362;
+ cpu->reset_fpsid = 0x410120b4;
+ cpu->isar.mvfr0 = 0x11111111;
+ cpu->isar.mvfr1 = 0x00000000;
+ cpu->ctr = 0x1dd20d2;
+ cpu->reset_sctlr = 0x00050078;
+ cpu->id_pfr0 = 0x111;
+ cpu->id_pfr1 = 0x1;
+ cpu->isar.id_dfr0 = 0x2;
+ cpu->id_afr0 = 0x3;
+ cpu->isar.id_mmfr0 = 0x01130003;
+ cpu->isar.id_mmfr1 = 0x10030302;
+ cpu->isar.id_mmfr2 = 0x01222110;
+ cpu->isar.id_isar0 = 0x00140011;
+ cpu->isar.id_isar1 = 0x12002111;
+ cpu->isar.id_isar2 = 0x11231111;
+ cpu->isar.id_isar3 = 0x01102131;
+ cpu->isar.id_isar4 = 0x141;
+ cpu->reset_auxcr = 7;
+}
+
+static void arm1136_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "arm,arm1136";
+ set_feature(&cpu->env, ARM_FEATURE_V6K);
+ set_feature(&cpu->env, ARM_FEATURE_V6);
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
+ cpu->midr = 0x4117b363;
+ cpu->reset_fpsid = 0x410120b4;
+ cpu->isar.mvfr0 = 0x11111111;
+ cpu->isar.mvfr1 = 0x00000000;
+ cpu->ctr = 0x1dd20d2;
+ cpu->reset_sctlr = 0x00050078;
+ cpu->id_pfr0 = 0x111;
+ cpu->id_pfr1 = 0x1;
+ cpu->isar.id_dfr0 = 0x2;
+ cpu->id_afr0 = 0x3;
+ cpu->isar.id_mmfr0 = 0x01130003;
+ cpu->isar.id_mmfr1 = 0x10030302;
+ cpu->isar.id_mmfr2 = 0x01222110;
+ cpu->isar.id_isar0 = 0x00140011;
+ cpu->isar.id_isar1 = 0x12002111;
+ cpu->isar.id_isar2 = 0x11231111;
+ cpu->isar.id_isar3 = 0x01102131;
+ cpu->isar.id_isar4 = 0x141;
+ cpu->reset_auxcr = 7;
+}
+
+static void arm1176_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "arm,arm1176";
+ set_feature(&cpu->env, ARM_FEATURE_V6K);
+ set_feature(&cpu->env, ARM_FEATURE_VAPA);
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG);
+ set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS);
+ set_feature(&cpu->env, ARM_FEATURE_EL3);
+ cpu->midr = 0x410fb767;
+ cpu->reset_fpsid = 0x410120b5;
+ cpu->isar.mvfr0 = 0x11111111;
+ cpu->isar.mvfr1 = 0x00000000;
+ cpu->ctr = 0x1dd20d2;
+ cpu->reset_sctlr = 0x00050078;
+ cpu->id_pfr0 = 0x111;
+ cpu->id_pfr1 = 0x11;
+ cpu->isar.id_dfr0 = 0x33;
+ cpu->id_afr0 = 0;
+ cpu->isar.id_mmfr0 = 0x01130003;
+ cpu->isar.id_mmfr1 = 0x10030302;
+ cpu->isar.id_mmfr2 = 0x01222100;
+ cpu->isar.id_isar0 = 0x0140011;
+ cpu->isar.id_isar1 = 0x12002111;
+ cpu->isar.id_isar2 = 0x11231121;
+ cpu->isar.id_isar3 = 0x01102131;
+ cpu->isar.id_isar4 = 0x01141;
+ cpu->reset_auxcr = 7;
+}
+
+static void arm11mpcore_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "arm,arm11mpcore";
+ set_feature(&cpu->env, ARM_FEATURE_V6K);
+ set_feature(&cpu->env, ARM_FEATURE_VAPA);
+ set_feature(&cpu->env, ARM_FEATURE_MPIDR);
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ cpu->midr = 0x410fb022;
+ cpu->reset_fpsid = 0x410120b4;
+ cpu->isar.mvfr0 = 0x11111111;
+ cpu->isar.mvfr1 = 0x00000000;
+ cpu->ctr = 0x1d192992; /* 32K icache 32K dcache */
+ cpu->id_pfr0 = 0x111;
+ cpu->id_pfr1 = 0x1;
+ cpu->isar.id_dfr0 = 0;
+ cpu->id_afr0 = 0x2;
+ cpu->isar.id_mmfr0 = 0x01100103;
+ cpu->isar.id_mmfr1 = 0x10020302;
+ cpu->isar.id_mmfr2 = 0x01222000;
+ cpu->isar.id_isar0 = 0x00100011;
+ cpu->isar.id_isar1 = 0x12002111;
+ cpu->isar.id_isar2 = 0x11221011;
+ cpu->isar.id_isar3 = 0x01102131;
+ cpu->isar.id_isar4 = 0x141;
+ cpu->reset_auxcr = 1;
+}
+
+static void cortex_m0_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+ set_feature(&cpu->env, ARM_FEATURE_V6);
+ set_feature(&cpu->env, ARM_FEATURE_M);
+
+ cpu->midr = 0x410cc200;
+}
+
+static void cortex_m3_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+ set_feature(&cpu->env, ARM_FEATURE_V7);
+ set_feature(&cpu->env, ARM_FEATURE_M);
+ set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
+ cpu->midr = 0x410fc231;
+ cpu->pmsav7_dregion = 8;
+ cpu->id_pfr0 = 0x00000030;
+ cpu->id_pfr1 = 0x00000200;
+ cpu->isar.id_dfr0 = 0x00100000;
+ cpu->id_afr0 = 0x00000000;
+ cpu->isar.id_mmfr0 = 0x00000030;
+ cpu->isar.id_mmfr1 = 0x00000000;
+ cpu->isar.id_mmfr2 = 0x00000000;
+ cpu->isar.id_mmfr3 = 0x00000000;
+ cpu->isar.id_isar0 = 0x01141110;
+ cpu->isar.id_isar1 = 0x02111000;
+ cpu->isar.id_isar2 = 0x21112231;
+ cpu->isar.id_isar3 = 0x01111110;
+ cpu->isar.id_isar4 = 0x01310102;
+ cpu->isar.id_isar5 = 0x00000000;
+ cpu->isar.id_isar6 = 0x00000000;
+}
+
+static void cortex_m4_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ set_feature(&cpu->env, ARM_FEATURE_V7);
+ set_feature(&cpu->env, ARM_FEATURE_M);
+ set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
+ set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
+ cpu->midr = 0x410fc240; /* r0p0 */
+ cpu->pmsav7_dregion = 8;
+ cpu->isar.mvfr0 = 0x10110021;
+ cpu->isar.mvfr1 = 0x11000011;
+ cpu->isar.mvfr2 = 0x00000000;
+ cpu->id_pfr0 = 0x00000030;
+ cpu->id_pfr1 = 0x00000200;
+ cpu->isar.id_dfr0 = 0x00100000;
+ cpu->id_afr0 = 0x00000000;
+ cpu->isar.id_mmfr0 = 0x00000030;
+ cpu->isar.id_mmfr1 = 0x00000000;
+ cpu->isar.id_mmfr2 = 0x00000000;
+ cpu->isar.id_mmfr3 = 0x00000000;
+ cpu->isar.id_isar0 = 0x01141110;
+ cpu->isar.id_isar1 = 0x02111000;
+ cpu->isar.id_isar2 = 0x21112231;
+ cpu->isar.id_isar3 = 0x01111110;
+ cpu->isar.id_isar4 = 0x01310102;
+ cpu->isar.id_isar5 = 0x00000000;
+ cpu->isar.id_isar6 = 0x00000000;
+}
+
+static void cortex_m7_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ set_feature(&cpu->env, ARM_FEATURE_V7);
+ set_feature(&cpu->env, ARM_FEATURE_M);
+ set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
+ set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
+ cpu->midr = 0x411fc272; /* r1p2 */
+ cpu->pmsav7_dregion = 8;
+ cpu->isar.mvfr0 = 0x10110221;
+ cpu->isar.mvfr1 = 0x12000011;
+ cpu->isar.mvfr2 = 0x00000040;
+ cpu->id_pfr0 = 0x00000030;
+ cpu->id_pfr1 = 0x00000200;
+ cpu->isar.id_dfr0 = 0x00100000;
+ cpu->id_afr0 = 0x00000000;
+ cpu->isar.id_mmfr0 = 0x00100030;
+ cpu->isar.id_mmfr1 = 0x00000000;
+ cpu->isar.id_mmfr2 = 0x01000000;
+ cpu->isar.id_mmfr3 = 0x00000000;
+ cpu->isar.id_isar0 = 0x01101110;
+ cpu->isar.id_isar1 = 0x02112000;
+ cpu->isar.id_isar2 = 0x20232231;
+ cpu->isar.id_isar3 = 0x01111131;
+ cpu->isar.id_isar4 = 0x01310132;
+ cpu->isar.id_isar5 = 0x00000000;
+ cpu->isar.id_isar6 = 0x00000000;
+}
+
+static void cortex_m33_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ set_feature(&cpu->env, ARM_FEATURE_V8);
+ set_feature(&cpu->env, ARM_FEATURE_M);
+ set_feature(&cpu->env, ARM_FEATURE_M_MAIN);
+ set_feature(&cpu->env, ARM_FEATURE_M_SECURITY);
+ set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP);
+ cpu->midr = 0x410fd213; /* r0p3 */
+ cpu->pmsav7_dregion = 16;
+ cpu->sau_sregion = 8;
+ cpu->isar.mvfr0 = 0x10110021;
+ cpu->isar.mvfr1 = 0x11000011;
+ cpu->isar.mvfr2 = 0x00000040;
+ cpu->id_pfr0 = 0x00000030;
+ cpu->id_pfr1 = 0x00000210;
+ cpu->isar.id_dfr0 = 0x00200000;
+ cpu->id_afr0 = 0x00000000;
+ cpu->isar.id_mmfr0 = 0x00101F40;
+ cpu->isar.id_mmfr1 = 0x00000000;
+ cpu->isar.id_mmfr2 = 0x01000000;
+ cpu->isar.id_mmfr3 = 0x00000000;
+ cpu->isar.id_isar0 = 0x01101110;
+ cpu->isar.id_isar1 = 0x02212000;
+ cpu->isar.id_isar2 = 0x20232232;
+ cpu->isar.id_isar3 = 0x01111131;
+ cpu->isar.id_isar4 = 0x01310132;
+ cpu->isar.id_isar5 = 0x00000000;
+ cpu->isar.id_isar6 = 0x00000000;
+ cpu->clidr = 0x00000000;
+ cpu->ctr = 0x8000c000;
+}
+
+static const ARMCPRegInfo cortexr5_cp_reginfo[] = {
+ /* Dummy the TCM region regs for the moment */
+ { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0,
+ .access = PL1_RW, .type = ARM_CP_CONST },
+ { .name = "BTCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1,
+ .access = PL1_RW, .type = ARM_CP_CONST },
+ { .name = "DCACHE_INVAL", .cp = 15, .opc1 = 0, .crn = 15, .crm = 5,
+ .opc2 = 0, .access = PL1_W, .type = ARM_CP_NOP },
+ REGINFO_SENTINEL
+};
+
+static void cortex_r5_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ set_feature(&cpu->env, ARM_FEATURE_V7);
+ set_feature(&cpu->env, ARM_FEATURE_V7MP);
+ set_feature(&cpu->env, ARM_FEATURE_PMSA);
+ set_feature(&cpu->env, ARM_FEATURE_PMU);
+ cpu->midr = 0x411fc153; /* r1p3 */
+ cpu->id_pfr0 = 0x0131;
+ cpu->id_pfr1 = 0x001;
+ cpu->isar.id_dfr0 = 0x010400;
+ cpu->id_afr0 = 0x0;
+ cpu->isar.id_mmfr0 = 0x0210030;
+ cpu->isar.id_mmfr1 = 0x00000000;
+ cpu->isar.id_mmfr2 = 0x01200000;
+ cpu->isar.id_mmfr3 = 0x0211;
+ cpu->isar.id_isar0 = 0x02101111;
+ cpu->isar.id_isar1 = 0x13112111;
+ cpu->isar.id_isar2 = 0x21232141;
+ cpu->isar.id_isar3 = 0x01112131;
+ cpu->isar.id_isar4 = 0x0010142;
+ cpu->isar.id_isar5 = 0x0;
+ cpu->isar.id_isar6 = 0x0;
+ cpu->mp_is_up = true;
+ cpu->pmsav7_dregion = 16;
+ define_arm_cp_regs(cpu, cortexr5_cp_reginfo);
+}
+
+static void cortex_r5f_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cortex_r5_initfn(obj);
+ cpu->isar.mvfr0 = 0x10110221;
+ cpu->isar.mvfr1 = 0x00000011;
+}
+
+static void ti925t_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+ set_feature(&cpu->env, ARM_FEATURE_V4T);
+ set_feature(&cpu->env, ARM_FEATURE_OMAPCP);
+ cpu->midr = ARM_CPUID_TI925T;
+ cpu->ctr = 0x5109149;
+ cpu->reset_sctlr = 0x00000070;
+}
+
+static void sa1100_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "intel,sa1100";
+ set_feature(&cpu->env, ARM_FEATURE_STRONGARM);
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ cpu->midr = 0x4401A11B;
+ cpu->reset_sctlr = 0x00000070;
+}
+
+static void sa1110_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+ set_feature(&cpu->env, ARM_FEATURE_STRONGARM);
+ set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS);
+ cpu->midr = 0x6901B119;
+ cpu->reset_sctlr = 0x00000070;
+}
+
+static void pxa250_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "marvell,xscale";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_XSCALE);
+ cpu->midr = 0x69052100;
+ cpu->ctr = 0xd172172;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void pxa255_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "marvell,xscale";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_XSCALE);
+ cpu->midr = 0x69052d00;
+ cpu->ctr = 0xd172172;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void pxa260_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "marvell,xscale";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_XSCALE);
+ cpu->midr = 0x69052903;
+ cpu->ctr = 0xd172172;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void pxa261_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "marvell,xscale";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_XSCALE);
+ cpu->midr = 0x69052d05;
+ cpu->ctr = 0xd172172;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void pxa262_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "marvell,xscale";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_XSCALE);
+ cpu->midr = 0x69052d06;
+ cpu->ctr = 0xd172172;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void pxa270a0_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "marvell,xscale";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_XSCALE);
+ set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
+ cpu->midr = 0x69054110;
+ cpu->ctr = 0xd172172;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void pxa270a1_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "marvell,xscale";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_XSCALE);
+ set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
+ cpu->midr = 0x69054111;
+ cpu->ctr = 0xd172172;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void pxa270b0_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "marvell,xscale";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_XSCALE);
+ set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
+ cpu->midr = 0x69054112;
+ cpu->ctr = 0xd172172;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void pxa270b1_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "marvell,xscale";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_XSCALE);
+ set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
+ cpu->midr = 0x69054113;
+ cpu->ctr = 0xd172172;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void pxa270c0_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "marvell,xscale";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_XSCALE);
+ set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
+ cpu->midr = 0x69054114;
+ cpu->ctr = 0xd172172;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void pxa270c5_initfn(Object *obj)
+{
+ ARMCPU *cpu = ARM_CPU(obj);
+
+ cpu->dtb_compatible = "marvell,xscale";
+ set_feature(&cpu->env, ARM_FEATURE_V5);
+ set_feature(&cpu->env, ARM_FEATURE_XSCALE);
+ set_feature(&cpu->env, ARM_FEATURE_IWMMXT);
+ cpu->midr = 0x69054117;
+ cpu->ctr = 0xd172172;
+ cpu->reset_sctlr = 0x00000078;
+}
+
+static void arm_v7m_class_init(ObjectClass *oc, void *data)
+{
+ ARMCPUClass *acc = ARM_CPU_CLASS(oc);
+ CPUClass *cc = CPU_CLASS(oc);
+
+ acc->info = data;
+#ifndef CONFIG_USER_ONLY
+ cc->do_interrupt = arm_v7m_cpu_do_interrupt;
+#endif
+
+ cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt;
+}
+
+static const ARMCPUInfo arm_tcg_cpus[] = {
+ { .name = "arm926", .initfn = arm926_initfn },
+ { .name = "arm946", .initfn = arm946_initfn },
+ { .name = "arm1026", .initfn = arm1026_initfn },
+ /*
+ * What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an
+ * older core than plain "arm1136". In particular this does not
+ * have the v6K features.
+ */
+ { .name = "arm1136-r2", .initfn = arm1136_r2_initfn },
+ { .name = "arm1136", .initfn = arm1136_initfn },
+ { .name = "arm1176", .initfn = arm1176_initfn },
+ { .name = "arm11mpcore", .initfn = arm11mpcore_initfn },
+ { .name = "cortex-m0", .initfn = cortex_m0_initfn,
+ .class_init = arm_v7m_class_init },
+ { .name = "cortex-m3", .initfn = cortex_m3_initfn,
+ .class_init = arm_v7m_class_init },
+ { .name = "cortex-m4", .initfn = cortex_m4_initfn,
+ .class_init = arm_v7m_class_init },
+ { .name = "cortex-m7", .initfn = cortex_m7_initfn,
+ .class_init = arm_v7m_class_init },
+ { .name = "cortex-m33", .initfn = cortex_m33_initfn,
+ .class_init = arm_v7m_class_init },
+ { .name = "cortex-r5", .initfn = cortex_r5_initfn },
+ { .name = "cortex-r5f", .initfn = cortex_r5f_initfn },
+ { .name = "ti925t", .initfn = ti925t_initfn },
+ { .name = "sa1100", .initfn = sa1100_initfn },
+ { .name = "sa1110", .initfn = sa1110_initfn },
+ { .name = "pxa250", .initfn = pxa250_initfn },
+ { .name = "pxa255", .initfn = pxa255_initfn },
+ { .name = "pxa260", .initfn = pxa260_initfn },
+ { .name = "pxa261", .initfn = pxa261_initfn },
+ { .name = "pxa262", .initfn = pxa262_initfn },
+ /* "pxa270" is an alias for "pxa270-a0" */
+ { .name = "pxa270", .initfn = pxa270a0_initfn },
+ { .name = "pxa270-a0", .initfn = pxa270a0_initfn },
+ { .name = "pxa270-a1", .initfn = pxa270a1_initfn },
+ { .name = "pxa270-b0", .initfn = pxa270b0_initfn },
+ { .name = "pxa270-b1", .initfn = pxa270b1_initfn },
+ { .name = "pxa270-c0", .initfn = pxa270c0_initfn },
+ { .name = "pxa270-c5", .initfn = pxa270c5_initfn },
+};
+
+static void arm_tcg_cpu_register_types(void)
+{
+ size_t i;
+
+ for (i = 0; i < ARRAY_SIZE(arm_tcg_cpus); ++i) {
+ arm_cpu_register(&arm_tcg_cpus[i]);
+ }
+}
+
+type_init(arm_tcg_cpu_register_types)
+
+#endif /* !CONFIG_USER_ONLY || !TARGET_AARCH64 */
diff --git a/target/arm/Makefile.objs b/target/arm/Makefile.objs
index 775b3e24f22..83febd232c8 100644
--- a/target/arm/Makefile.objs
+++ b/target/arm/Makefile.objs
@@ -79,6 +79,7 @@ obj-y += translate.o op_helper.o
obj-y += crypto_helper.o
obj-y += iwmmxt_helper.o vec_helper.o neon_helper.o
obj-y += m_helper.o
+obj-y += cpu_tcg.o
obj-$(CONFIG_SOFTMMU) += psci.o
--
2.20.1
next prev parent reply other threads:[~2020-05-11 13:54 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-11 13:33 [PULL 00/34] target-arm queue Peter Maydell
2020-05-11 13:33 ` [PULL 01/34] aspeed: Add boot stub for smp booting Peter Maydell
2020-05-11 13:33 ` [PULL 02/34] target/arm: Drop access_el3_aa32ns_aa64any() Peter Maydell
2020-05-11 13:33 ` [PULL 03/34] aspeed: Support AST2600A1 silicon revision Peter Maydell
2020-05-11 13:33 ` [PULL 04/34] aspeed: sdmc: Implement AST2600 locking behaviour Peter Maydell
2020-05-11 13:33 ` [PULL 05/34] hw/arm/nrf51: Add NRF51_PERIPHERAL_SIZE definition Peter Maydell
2020-05-11 13:33 ` [PULL 06/34] hw/timer/nrf51_timer: Display timer ID in trace events Peter Maydell
2020-05-11 13:33 ` [PULL 07/34] hw/timer/nrf51_timer: Add trace event of counter value update Peter Maydell
2020-05-11 13:33 ` [PULL 08/34] exec: Add block comments for watchpoint routines Peter Maydell
2020-05-11 13:33 ` [PULL 09/34] exec: Fix cpu_watchpoint_address_matches address length Peter Maydell
2020-05-11 13:33 ` [PULL 10/34] accel/tcg: Add block comment for probe_access Peter Maydell
2020-05-11 13:33 ` [PULL 11/34] accel/tcg: Adjust probe_access call to page_check_range Peter Maydell
2020-05-11 13:33 ` [PULL 12/34] accel/tcg: Add probe_access_flags Peter Maydell
2020-05-11 13:33 ` [PULL 13/34] accel/tcg: Add endian-specific cpu_{ld, st}* operations Peter Maydell
2020-05-11 13:33 ` [PULL 14/34] target/arm: Use cpu_*_data_ra for sve_ldst_tlb_fn Peter Maydell
2020-05-11 13:33 ` [PULL 15/34] target/arm: Drop manual handling of set/clear_helper_retaddr Peter Maydell
2020-05-11 13:33 ` [PULL 16/34] target/arm: Add sve infrastructure for page lookup Peter Maydell
2020-05-11 13:33 ` [PULL 17/34] target/arm: Adjust interface of sve_ld1_host_fn Peter Maydell
2020-05-11 13:33 ` [PULL 18/34] target/arm: Use SVEContLdSt in sve_ld1_r Peter Maydell
2020-05-11 13:33 ` [PULL 19/34] target/arm: Handle watchpoints " Peter Maydell
2020-05-11 13:33 ` [PULL 20/34] target/arm: Use SVEContLdSt for multi-register contiguous loads Peter Maydell
2020-05-11 13:33 ` [PULL 21/34] target/arm: Update contiguous first-fault and no-fault loads Peter Maydell
2020-05-11 13:33 ` [PULL 22/34] target/arm: Use SVEContLdSt for contiguous stores Peter Maydell
2020-05-11 13:33 ` [PULL 23/34] target/arm: Reuse sve_probe_page for gather first-fault loads Peter Maydell
2020-05-11 13:33 ` [PULL 24/34] target/arm: Reuse sve_probe_page for scatter stores Peter Maydell
2020-05-11 13:33 ` [PULL 25/34] target/arm: Reuse sve_probe_page for gather loads Peter Maydell
2020-05-11 13:33 ` [PULL 26/34] target/arm: Remove sve_memopidx Peter Maydell
2020-05-11 13:33 ` [PULL 27/34] target/arm/kvm: Inline set_feature() calls Peter Maydell
2020-05-11 13:33 ` [PULL 28/34] target/arm: Make set_feature() available for other files Peter Maydell
2020-05-11 13:34 ` [PULL 29/34] target/arm/cpu: Use ARRAY_SIZE() to iterate over ARMCPUInfo[] Peter Maydell
2020-05-11 13:34 ` [PULL 30/34] target/arm/cpu: Restrict v8M IDAU interface to Aarch32 CPUs Peter Maydell
2020-05-11 13:34 ` Peter Maydell [this message]
2020-05-11 13:34 ` [PULL 32/34] hw/arm/musicpal: Map the UART devices unconditionally Peter Maydell
2020-05-11 13:34 ` [PULL 33/34] target/arm: Use tcg_gen_gvec_5_ptr for sve FMLA/FCMLA Peter Maydell
2020-05-11 13:34 ` [PULL 34/34] target/arm: Fix tcg_gen_gvec_dup_imm vs DUP (indexed) Peter Maydell
2020-05-11 14:03 ` [PULL 00/34] target-arm queue Peter Maydell
2020-05-11 14:25 ` Peter Maydell
2020-05-11 15:17 ` no-reply
2020-05-11 15:44 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200511133405.5275-32-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.