From: Nicolas Toromanoff <nicolas.toromanoff@st.com> To: Herbert Xu <herbert@gondor.apana.org.au>, "David S . Miller" <davem@davemloft.net>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com> Cc: Nicolas Toromanoff <nicolas.toromanoff@st.com>, <linux-crypto@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH 1/5] crypto: stm32/crc: fix ext4 chksum BUG_ON() Date: Tue, 12 May 2020 16:11:09 +0200 [thread overview] Message-ID: <20200512141113.18972-2-nicolas.toromanoff@st.com> (raw) In-Reply-To: <20200512141113.18972-1-nicolas.toromanoff@st.com> Allow use of crc_update without prior call to crc_init. And change (and fix) driver to use CRC device even on unaligned buffers. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> --- drivers/crypto/stm32/stm32-crc32.c | 98 +++++++++++++++--------------- 1 file changed, 48 insertions(+), 50 deletions(-) diff --git a/drivers/crypto/stm32/stm32-crc32.c b/drivers/crypto/stm32/stm32-crc32.c index 8e92e4ac79f1..c6156bf6c603 100644 --- a/drivers/crypto/stm32/stm32-crc32.c +++ b/drivers/crypto/stm32/stm32-crc32.c @@ -28,8 +28,10 @@ /* Registers values */ #define CRC_CR_RESET BIT(0) -#define CRC_CR_REVERSE (BIT(7) | BIT(6) | BIT(5)) #define CRC_INIT_DEFAULT 0xFFFFFFFF +#define CRC_CR_REV_IN_WORD (BIT(6) | BIT(5)) +#define CRC_CR_REV_IN_BYTE BIT(5) +#define CRC_CR_REV_OUT BIT(7) #define CRC_AUTOSUSPEND_DELAY 50 @@ -38,8 +40,6 @@ struct stm32_crc { struct device *dev; void __iomem *regs; struct clk *clk; - u8 pending_data[sizeof(u32)]; - size_t nb_pending_bytes; }; struct stm32_crc_list { @@ -59,7 +59,6 @@ struct stm32_crc_ctx { struct stm32_crc_desc_ctx { u32 partial; /* crc32c: partial in first 4 bytes of that struct */ - struct stm32_crc *crc; }; static int stm32_crc32_cra_init(struct crypto_tfm *tfm) @@ -99,25 +98,22 @@ static int stm32_crc_init(struct shash_desc *desc) struct stm32_crc *crc; spin_lock_bh(&crc_list.lock); - list_for_each_entry(crc, &crc_list.dev_list, list) { - ctx->crc = crc; - break; - } + crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list); spin_unlock_bh(&crc_list.lock); - pm_runtime_get_sync(ctx->crc->dev); + pm_runtime_get_sync(crc->dev); /* Reset, set key, poly and configure in bit reverse mode */ - writel_relaxed(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT); - writel_relaxed(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL); - writel_relaxed(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR); + writel_relaxed(bitrev32(mctx->key), crc->regs + CRC_INIT); + writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL); + writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT, + crc->regs + CRC_CR); /* Store partial result */ - ctx->partial = readl_relaxed(ctx->crc->regs + CRC_DR); - ctx->crc->nb_pending_bytes = 0; + ctx->partial = readl_relaxed(crc->regs + CRC_DR); - pm_runtime_mark_last_busy(ctx->crc->dev); - pm_runtime_put_autosuspend(ctx->crc->dev); + pm_runtime_mark_last_busy(crc->dev); + pm_runtime_put_autosuspend(crc->dev); return 0; } @@ -126,31 +122,49 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8, unsigned int length) { struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc); - struct stm32_crc *crc = ctx->crc; - u32 *d32; - unsigned int i; + struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm); + struct stm32_crc *crc; + + spin_lock_bh(&crc_list.lock); + crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list); + spin_unlock_bh(&crc_list.lock); pm_runtime_get_sync(crc->dev); - if (unlikely(crc->nb_pending_bytes)) { - while (crc->nb_pending_bytes != sizeof(u32) && length) { - /* Fill in pending data */ - crc->pending_data[crc->nb_pending_bytes++] = *(d8++); + /* + * Restore previously calculated CRC for this context as init value + * Restore polynomial configuration + * Configure in register for word input data, + * Configure out register in reversed bit mode data. + */ + writel_relaxed(bitrev32(ctx->partial), crc->regs + CRC_INIT); + writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL); + writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT, + crc->regs + CRC_CR); + + if (d8 != PTR_ALIGN(d8, sizeof(u32))) { + /* Configure for byte data */ + writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT, + crc->regs + CRC_CR); + while (d8 != PTR_ALIGN(d8, sizeof(u32)) && length) { + writeb_relaxed(*d8++, crc->regs + CRC_DR); length--; } - - if (crc->nb_pending_bytes == sizeof(u32)) { - /* Process completed pending data */ - writel_relaxed(*(u32 *)crc->pending_data, - crc->regs + CRC_DR); - crc->nb_pending_bytes = 0; - } + /* Configure for word data */ + writel_relaxed(CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT, + crc->regs + CRC_CR); } - d32 = (u32 *)d8; - for (i = 0; i < length >> 2; i++) - /* Process 32 bits data */ - writel_relaxed(*(d32++), crc->regs + CRC_DR); + for (; length >= sizeof(u32); d8 += sizeof(u32), length -= sizeof(u32)) + writel_relaxed(*((u32 *)d8), crc->regs + CRC_DR); + + if (length) { + /* Configure for byte data */ + writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT, + crc->regs + CRC_CR); + while (length--) + writeb_relaxed(*d8++, crc->regs + CRC_DR); + } /* Store partial result */ ctx->partial = readl_relaxed(crc->regs + CRC_DR); @@ -158,22 +172,6 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8, pm_runtime_mark_last_busy(crc->dev); pm_runtime_put_autosuspend(crc->dev); - /* Check for pending data (non 32 bits) */ - length &= 3; - if (likely(!length)) - return 0; - - if ((crc->nb_pending_bytes + length) >= sizeof(u32)) { - /* Shall not happen */ - dev_err(crc->dev, "Pending data overflow\n"); - return -EINVAL; - } - - d8 = (const u8 *)d32; - for (i = 0; i < length; i++) - /* Store pending data */ - crc->pending_data[crc->nb_pending_bytes++] = *(d8++); - return 0; } -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Toromanoff <nicolas.toromanoff@st.com> To: Herbert Xu <herbert@gondor.apana.org.au>, "David S . Miller" <davem@davemloft.net>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com> Cc: linux-kernel@vger.kernel.org, Nicolas Toromanoff <nicolas.toromanoff@st.com>, linux-crypto@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-stm32@st-md-mailman.stormreply.com Subject: [PATCH 1/5] crypto: stm32/crc: fix ext4 chksum BUG_ON() Date: Tue, 12 May 2020 16:11:09 +0200 [thread overview] Message-ID: <20200512141113.18972-2-nicolas.toromanoff@st.com> (raw) In-Reply-To: <20200512141113.18972-1-nicolas.toromanoff@st.com> Allow use of crc_update without prior call to crc_init. And change (and fix) driver to use CRC device even on unaligned buffers. Fixes: b51dbe90912a ("crypto: stm32 - Support for STM32 CRC32 crypto module") Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com> --- drivers/crypto/stm32/stm32-crc32.c | 98 +++++++++++++++--------------- 1 file changed, 48 insertions(+), 50 deletions(-) diff --git a/drivers/crypto/stm32/stm32-crc32.c b/drivers/crypto/stm32/stm32-crc32.c index 8e92e4ac79f1..c6156bf6c603 100644 --- a/drivers/crypto/stm32/stm32-crc32.c +++ b/drivers/crypto/stm32/stm32-crc32.c @@ -28,8 +28,10 @@ /* Registers values */ #define CRC_CR_RESET BIT(0) -#define CRC_CR_REVERSE (BIT(7) | BIT(6) | BIT(5)) #define CRC_INIT_DEFAULT 0xFFFFFFFF +#define CRC_CR_REV_IN_WORD (BIT(6) | BIT(5)) +#define CRC_CR_REV_IN_BYTE BIT(5) +#define CRC_CR_REV_OUT BIT(7) #define CRC_AUTOSUSPEND_DELAY 50 @@ -38,8 +40,6 @@ struct stm32_crc { struct device *dev; void __iomem *regs; struct clk *clk; - u8 pending_data[sizeof(u32)]; - size_t nb_pending_bytes; }; struct stm32_crc_list { @@ -59,7 +59,6 @@ struct stm32_crc_ctx { struct stm32_crc_desc_ctx { u32 partial; /* crc32c: partial in first 4 bytes of that struct */ - struct stm32_crc *crc; }; static int stm32_crc32_cra_init(struct crypto_tfm *tfm) @@ -99,25 +98,22 @@ static int stm32_crc_init(struct shash_desc *desc) struct stm32_crc *crc; spin_lock_bh(&crc_list.lock); - list_for_each_entry(crc, &crc_list.dev_list, list) { - ctx->crc = crc; - break; - } + crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list); spin_unlock_bh(&crc_list.lock); - pm_runtime_get_sync(ctx->crc->dev); + pm_runtime_get_sync(crc->dev); /* Reset, set key, poly and configure in bit reverse mode */ - writel_relaxed(bitrev32(mctx->key), ctx->crc->regs + CRC_INIT); - writel_relaxed(bitrev32(mctx->poly), ctx->crc->regs + CRC_POL); - writel_relaxed(CRC_CR_RESET | CRC_CR_REVERSE, ctx->crc->regs + CRC_CR); + writel_relaxed(bitrev32(mctx->key), crc->regs + CRC_INIT); + writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL); + writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT, + crc->regs + CRC_CR); /* Store partial result */ - ctx->partial = readl_relaxed(ctx->crc->regs + CRC_DR); - ctx->crc->nb_pending_bytes = 0; + ctx->partial = readl_relaxed(crc->regs + CRC_DR); - pm_runtime_mark_last_busy(ctx->crc->dev); - pm_runtime_put_autosuspend(ctx->crc->dev); + pm_runtime_mark_last_busy(crc->dev); + pm_runtime_put_autosuspend(crc->dev); return 0; } @@ -126,31 +122,49 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8, unsigned int length) { struct stm32_crc_desc_ctx *ctx = shash_desc_ctx(desc); - struct stm32_crc *crc = ctx->crc; - u32 *d32; - unsigned int i; + struct stm32_crc_ctx *mctx = crypto_shash_ctx(desc->tfm); + struct stm32_crc *crc; + + spin_lock_bh(&crc_list.lock); + crc = list_first_entry(&crc_list.dev_list, struct stm32_crc, list); + spin_unlock_bh(&crc_list.lock); pm_runtime_get_sync(crc->dev); - if (unlikely(crc->nb_pending_bytes)) { - while (crc->nb_pending_bytes != sizeof(u32) && length) { - /* Fill in pending data */ - crc->pending_data[crc->nb_pending_bytes++] = *(d8++); + /* + * Restore previously calculated CRC for this context as init value + * Restore polynomial configuration + * Configure in register for word input data, + * Configure out register in reversed bit mode data. + */ + writel_relaxed(bitrev32(ctx->partial), crc->regs + CRC_INIT); + writel_relaxed(bitrev32(mctx->poly), crc->regs + CRC_POL); + writel_relaxed(CRC_CR_RESET | CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT, + crc->regs + CRC_CR); + + if (d8 != PTR_ALIGN(d8, sizeof(u32))) { + /* Configure for byte data */ + writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT, + crc->regs + CRC_CR); + while (d8 != PTR_ALIGN(d8, sizeof(u32)) && length) { + writeb_relaxed(*d8++, crc->regs + CRC_DR); length--; } - - if (crc->nb_pending_bytes == sizeof(u32)) { - /* Process completed pending data */ - writel_relaxed(*(u32 *)crc->pending_data, - crc->regs + CRC_DR); - crc->nb_pending_bytes = 0; - } + /* Configure for word data */ + writel_relaxed(CRC_CR_REV_IN_WORD | CRC_CR_REV_OUT, + crc->regs + CRC_CR); } - d32 = (u32 *)d8; - for (i = 0; i < length >> 2; i++) - /* Process 32 bits data */ - writel_relaxed(*(d32++), crc->regs + CRC_DR); + for (; length >= sizeof(u32); d8 += sizeof(u32), length -= sizeof(u32)) + writel_relaxed(*((u32 *)d8), crc->regs + CRC_DR); + + if (length) { + /* Configure for byte data */ + writel_relaxed(CRC_CR_REV_IN_BYTE | CRC_CR_REV_OUT, + crc->regs + CRC_CR); + while (length--) + writeb_relaxed(*d8++, crc->regs + CRC_DR); + } /* Store partial result */ ctx->partial = readl_relaxed(crc->regs + CRC_DR); @@ -158,22 +172,6 @@ static int stm32_crc_update(struct shash_desc *desc, const u8 *d8, pm_runtime_mark_last_busy(crc->dev); pm_runtime_put_autosuspend(crc->dev); - /* Check for pending data (non 32 bits) */ - length &= 3; - if (likely(!length)) - return 0; - - if ((crc->nb_pending_bytes + length) >= sizeof(u32)) { - /* Shall not happen */ - dev_err(crc->dev, "Pending data overflow\n"); - return -EINVAL; - } - - d8 = (const u8 *)d32; - for (i = 0; i < length; i++) - /* Store pending data */ - crc->pending_data[crc->nb_pending_bytes++] = *(d8++); - return 0; } -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-12 14:13 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-12 14:11 [PATCH 0/5] STM32 CRC update Nicolas Toromanoff 2020-05-12 14:11 ` Nicolas Toromanoff 2020-05-12 14:11 ` Nicolas Toromanoff [this message] 2020-05-12 14:11 ` [PATCH 1/5] crypto: stm32/crc: fix ext4 chksum BUG_ON() Nicolas Toromanoff 2020-05-12 14:11 ` [PATCH 2/5] crypto: stm32/crc: fix run-time self test issue Nicolas Toromanoff 2020-05-12 14:11 ` Nicolas Toromanoff 2020-05-12 14:11 ` [PATCH 3/5] crypto: stm32/crc: fix multi-instance Nicolas Toromanoff 2020-05-12 14:11 ` Nicolas Toromanoff 2020-05-12 14:11 ` [PATCH 4/5] crypto: stm32/crc: don't sleep in runtime pm Nicolas Toromanoff 2020-05-12 14:11 ` Nicolas Toromanoff 2020-05-12 14:11 ` [PATCH 5/5] crypto: stm32/crc: protect from concurrent accesses Nicolas Toromanoff 2020-05-12 14:11 ` Nicolas Toromanoff 2020-05-22 16:11 ` Ard Biesheuvel 2020-05-22 16:11 ` Ard Biesheuvel 2020-05-25 7:24 ` Nicolas TOROMANOFF 2020-05-25 7:24 ` Nicolas TOROMANOFF 2020-05-25 7:46 ` Ard Biesheuvel 2020-05-25 7:46 ` Ard Biesheuvel 2020-05-25 9:01 ` Nicolas TOROMANOFF 2020-05-25 9:01 ` Nicolas TOROMANOFF 2020-05-25 9:07 ` Ard Biesheuvel 2020-05-25 9:07 ` Ard Biesheuvel 2020-05-25 11:49 ` Nicolas TOROMANOFF 2020-05-25 11:49 ` Nicolas TOROMANOFF 2020-05-25 12:01 ` Ard Biesheuvel 2020-05-25 12:01 ` Ard Biesheuvel 2020-05-22 14:13 ` [PATCH 0/5] STM32 CRC update Herbert Xu 2020-05-22 14:13 ` Herbert Xu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200512141113.18972-2-nicolas.toromanoff@st.com \ --to=nicolas.toromanoff@st.com \ --cc=alexandre.torgue@st.com \ --cc=davem@davemloft.net \ --cc=herbert@gondor.apana.org.au \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-crypto@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.