All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support
Date: Thu, 14 May 2020 11:59:00 +0200	[thread overview]
Message-ID: <20200514095912.14428-1-sr@denx.de> (raw)


This patch adds very basic support for the Octeon III SoCs. Only CFI
parallel UART, reset and NOR flash are supported for now.

Please note that the basic Octeon port does not include the DDR3/4
initialization yet. This will be added in some follow-up patches later.
To still use U-Boot on with this port, the L2 cache (4MiB on Octeon III
CN73xx) is used as RAM. This way, U-Boot can boot to the prompt on such
boards.

Thanks,
Stefan

Changes in v2:
- New patch
- New patch
- Restructure patch by adding empty functions to asm/cm.h instead
- New patch
- New patch
- Move bit macro definition to mipsregs.h
- Remove custom start.S and use common start.S. Minimal custom lowlevel
  init code is currently added in the custom lowlevel_init.S. This needs
  to be extended with necessary code, like errata handling etc. But for
  a very first basic port, this seems to be all thats needed to boot on
  the EBB7304 to the prompt.
- Removed select CREATE_ARCH_SYMLINK
- Removed Octeon II support, as its currently no added in this patchset
- Added cache.c to add the platform specific cache functions as no-ops
  for Octeon as the platform is cache coherent
- Removed CONFIG_MIPS_CACHE_COHERENT
- Added CONFIG_CPU_CAVIUM_OCTEON to Kconfig and selected it for Octeon
  to enable better sync with the Linux files in the future
- Add get_tbclk() -> no need to define CONFIG_SYS_MIPS_TIMER_FREQ any more
- Removed CONFIG_SYS_MIPS_TIMER_FREQ

Aaron Williams (2):
  mips: mipsregs.h: Add more register macros for Octeon port
  mips: octeon: Initial minimal support for the Marvell Octeon SoC

Stefan Roese (10):
  mips: start.S: Add CONFIG_MIPS_INIT_JUMP_OFFSET
  mips: start.S: Don't call mips_cache_reset() on ARCH_OCTEON
  mips: cache: Allow using CONFIG_MIPS_L2_CACHE without CONFIG_MIPS_CM
  mips: cache: Make flush_cache() weak to enable overwrite
  mips: time: Only compile the weak get_tbclk() when needed
  mips: traps: Set WG bit in EBase register on Octeon
  mips: mipsregs.h: Sync with linux v5.7.0-rc3 version
  sysreset: Add Octeon sysreset driver
  mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file
  mips: octeon: Add minimal Octeon 3 EBB7304 EVK support

 MAINTAINERS                                   |  7 ++
 arch/mips/Kconfig                             | 43 +++++++++
 arch/mips/Makefile                            |  3 +
 arch/mips/cpu/start.S                         |  6 ++
 arch/mips/cpu/time.c                          |  2 +
 arch/mips/dts/Makefile                        |  1 +
 arch/mips/dts/mrvl,cn73xx.dtsi                | 64 +++++++++++++
 arch/mips/dts/mrvl,octeon-ebb7304.dts         | 96 +++++++++++++++++++
 arch/mips/include/asm/cm.h                    | 12 +++
 arch/mips/include/asm/mipsregs.h              | 64 +++++++++----
 arch/mips/lib/cache.c                         |  4 +-
 arch/mips/lib/traps.c                         |  4 +
 arch/mips/mach-octeon/Kconfig                 | 67 +++++++++++++
 arch/mips/mach-octeon/Makefile                | 10 ++
 arch/mips/mach-octeon/cache.c                 | 20 ++++
 arch/mips/mach-octeon/clock.c                 | 27 ++++++
 arch/mips/mach-octeon/cpu.c                   | 55 +++++++++++
 arch/mips/mach-octeon/dram.c                  | 27 ++++++
 arch/mips/mach-octeon/include/ioremap.h       | 30 ++++++
 arch/mips/mach-octeon/include/mach/cavm-reg.h | 42 ++++++++
 arch/mips/mach-octeon/include/mach/clock.h    | 24 +++++
 arch/mips/mach-octeon/lowlevel_init.S         | 75 +++++++++++++++
 board/Marvell/octeon_ebb7304/Kconfig          | 19 ++++
 board/Marvell/octeon_ebb7304/MAINTAINERS      |  7 ++
 board/Marvell/octeon_ebb7304/Makefile         |  8 ++
 board/Marvell/octeon_ebb7304/board.c          | 12 +++
 configs/octeon_ebb7304_defconfig              | 34 +++++++
 drivers/sysreset/Kconfig                      |  7 ++
 drivers/sysreset/Makefile                     |  1 +
 drivers/sysreset/sysreset_octeon.c            | 52 ++++++++++
 include/configs/octeon_common.h               | 25 +++++
 include/configs/octeon_ebb7304.h              | 20 ++++
 scripts/config_whitelist.txt                  |  1 -
 33 files changed, 846 insertions(+), 23 deletions(-)
 create mode 100644 arch/mips/dts/mrvl,cn73xx.dtsi
 create mode 100644 arch/mips/dts/mrvl,octeon-ebb7304.dts
 create mode 100644 arch/mips/mach-octeon/Kconfig
 create mode 100644 arch/mips/mach-octeon/Makefile
 create mode 100644 arch/mips/mach-octeon/cache.c
 create mode 100644 arch/mips/mach-octeon/clock.c
 create mode 100644 arch/mips/mach-octeon/cpu.c
 create mode 100644 arch/mips/mach-octeon/dram.c
 create mode 100644 arch/mips/mach-octeon/include/ioremap.h
 create mode 100644 arch/mips/mach-octeon/include/mach/cavm-reg.h
 create mode 100644 arch/mips/mach-octeon/include/mach/clock.h
 create mode 100644 arch/mips/mach-octeon/lowlevel_init.S
 create mode 100644 board/Marvell/octeon_ebb7304/Kconfig
 create mode 100644 board/Marvell/octeon_ebb7304/MAINTAINERS
 create mode 100644 board/Marvell/octeon_ebb7304/Makefile
 create mode 100644 board/Marvell/octeon_ebb7304/board.c
 create mode 100644 configs/octeon_ebb7304_defconfig
 create mode 100644 drivers/sysreset/sysreset_octeon.c
 create mode 100644 include/configs/octeon_common.h
 create mode 100644 include/configs/octeon_ebb7304.h

-- 
2.26.2

             reply	other threads:[~2020-05-14  9:59 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-14  9:59 Stefan Roese [this message]
2020-05-14  9:59 ` [PATCH v2 01/12] mips: start.S: Add CONFIG_MIPS_INIT_JUMP_OFFSET Stefan Roese
2020-05-14  9:59 ` [PATCH v2 02/12] mips: start.S: Don't call mips_cache_reset() on ARCH_OCTEON Stefan Roese
2020-05-14  9:59 ` [PATCH v2 03/12] mips: cache: Allow using CONFIG_MIPS_L2_CACHE without CONFIG_MIPS_CM Stefan Roese
2020-06-05 15:29   ` Daniel Schwierzeck
2020-05-14  9:59 ` [PATCH v2 04/12] mips: cache: Make flush_cache() weak to enable overwrite Stefan Roese
2020-06-05 15:29   ` Daniel Schwierzeck
2020-05-14  9:59 ` [PATCH v2 05/12] mips: time: Only compile the weak get_tbclk() when needed Stefan Roese
2020-06-05 15:29   ` Daniel Schwierzeck
2020-05-14  9:59 ` [PATCH v2 06/12] mips: traps: Set WG bit in EBase register on Octeon Stefan Roese
2020-06-05 15:30   ` Daniel Schwierzeck
2020-05-14  9:59 ` [PATCH v2 07/12] mips: mipsregs.h: Add more register macros for Octeon port Stefan Roese
2020-05-14  9:59 ` [PATCH v2 08/12] mips: mipsregs.h: Sync with linux v5.7.0-rc3 version Stefan Roese
2020-05-14  9:59 ` [PATCH v2 09/12] sysreset: Add Octeon sysreset driver Stefan Roese
2020-05-14  9:59 ` [PATCH v2 10/12] mips: octeon: Initial minimal support for the Marvell Octeon SoC Stefan Roese
2020-06-16 17:42   ` Daniel Schwierzeck
2020-06-19  8:08     ` Stefan Roese
2020-05-14  9:59 ` [PATCH v2 11/12] mips: octeon: dts: Add Octeon 3 cn73xx base dtsi file Stefan Roese
2020-05-14  9:59 ` [PATCH v2 12/12] mips: octeon: Add minimal Octeon 3 EBB7304 EVK support Stefan Roese
2020-06-16 17:35   ` Daniel Schwierzeck
2020-06-19  8:06     ` Stefan Roese
2020-05-26 12:23 ` [PATCH v2 00/12] mips: Add initial Octeon MIPS64 base support Stefan Roese
2020-06-02 10:59   ` Stefan Roese
2020-06-05 15:40     ` Daniel Schwierzeck
2020-06-06  5:25       ` Stefan Roese
2020-06-15  7:49         ` Stefan Roese
2020-06-16 17:27           ` Daniel Schwierzeck
2020-06-19  7:51             ` Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200514095912.14428-1-sr@denx.de \
    --to=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.