* [PATCH v2 0/4] scsi: ufs: Fix WriteBooster and cleanup UFS driver
@ 2020-05-14 15:01 ` Stanley Chu
0 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, Stanley Chu,
linux-arm-kernel, beanhuo
Hi,
This patch set fixes some WriteBooster issues and do small cleanup in UFS driver
v1 -> v2
- Remove dummy new line in patch [4] (Asutosh)
- Add more limitation to allow WriteBooster flush during Hibern8 in runtime-suspend. Now the device power mode is kept as Active power mode only if link is put in Hibern8 or Auto-Hibern8 is enabled during runtime-suspend (Asutosh)
Stanley Chu (4):
scsi: ufs: Remove unnecessary memset for dev_info
scsi: ufs: Allow WriteBooster on UFS 2.2 devices
scsi: ufs: Fix index of attributes query for WriteBooster feature
scsi: ufs: Fix WriteBooster flush during runtime suspend
drivers/scsi/ufs/ufs-sysfs.c | 13 ++++++--
drivers/scsi/ufs/ufs.h | 1 -
drivers/scsi/ufs/ufshcd.c | 62 +++++++++++++++++++-----------------
drivers/scsi/ufs/ufshcd.h | 2 +-
4 files changed, 45 insertions(+), 33 deletions(-)
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v2 0/4] scsi: ufs: Fix WriteBooster and cleanup UFS driver
@ 2020-05-14 15:01 ` Stanley Chu
0 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, Stanley Chu,
linux-arm-kernel, beanhuo
Hi,
This patch set fixes some WriteBooster issues and do small cleanup in UFS driver
v1 -> v2
- Remove dummy new line in patch [4] (Asutosh)
- Add more limitation to allow WriteBooster flush during Hibern8 in runtime-suspend. Now the device power mode is kept as Active power mode only if link is put in Hibern8 or Auto-Hibern8 is enabled during runtime-suspend (Asutosh)
Stanley Chu (4):
scsi: ufs: Remove unnecessary memset for dev_info
scsi: ufs: Allow WriteBooster on UFS 2.2 devices
scsi: ufs: Fix index of attributes query for WriteBooster feature
scsi: ufs: Fix WriteBooster flush during runtime suspend
drivers/scsi/ufs/ufs-sysfs.c | 13 ++++++--
drivers/scsi/ufs/ufs.h | 1 -
drivers/scsi/ufs/ufshcd.c | 62 +++++++++++++++++++-----------------
drivers/scsi/ufs/ufshcd.h | 2 +-
4 files changed, 45 insertions(+), 33 deletions(-)
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCH v2 1/4] scsi: ufs: Remove unnecessary memset for dev_info
2020-05-14 15:01 ` Stanley Chu
(?)
@ 2020-05-14 15:01 ` Stanley Chu
-1 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: beanhuo, cang, matthias.bgg, bvanassche, linux-mediatek,
linux-arm-kernel, linux-kernel, kuohong.wang, peter.wang,
chun-hung.wu, andy.teng, Stanley Chu
The whole UFS host instance has been zero-initialized by
scsi_host_alloc(), thus UFS driver does not need to clear
"dev_info" member specifically in ufshcd_device_params_init().
Simply remove the unnecessary code.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufshcd.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 426073a518ef..41ad4501b0d0 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7279,9 +7279,6 @@ static int ufshcd_device_params_init(struct ufs_hba *hba)
bool flag;
int ret;
- /* Clear any previous UFS device information */
- memset(&hba->dev_info, 0, sizeof(hba->dev_info));
-
/* Init check for device descriptor sizes */
ufshcd_init_desc_sizes(hba);
--
2.18.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 1/4] scsi: ufs: Remove unnecessary memset for dev_info
@ 2020-05-14 15:01 ` Stanley Chu
0 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, Stanley Chu,
linux-arm-kernel, beanhuo
The whole UFS host instance has been zero-initialized by
scsi_host_alloc(), thus UFS driver does not need to clear
"dev_info" member specifically in ufshcd_device_params_init().
Simply remove the unnecessary code.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufshcd.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 426073a518ef..41ad4501b0d0 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7279,9 +7279,6 @@ static int ufshcd_device_params_init(struct ufs_hba *hba)
bool flag;
int ret;
- /* Clear any previous UFS device information */
- memset(&hba->dev_info, 0, sizeof(hba->dev_info));
-
/* Init check for device descriptor sizes */
ufshcd_init_desc_sizes(hba);
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 1/4] scsi: ufs: Remove unnecessary memset for dev_info
@ 2020-05-14 15:01 ` Stanley Chu
0 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, Stanley Chu,
linux-arm-kernel, beanhuo
The whole UFS host instance has been zero-initialized by
scsi_host_alloc(), thus UFS driver does not need to clear
"dev_info" member specifically in ufshcd_device_params_init().
Simply remove the unnecessary code.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufshcd.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 426073a518ef..41ad4501b0d0 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7279,9 +7279,6 @@ static int ufshcd_device_params_init(struct ufs_hba *hba)
bool flag;
int ret;
- /* Clear any previous UFS device information */
- memset(&hba->dev_info, 0, sizeof(hba->dev_info));
-
/* Init check for device descriptor sizes */
ufshcd_init_desc_sizes(hba);
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 2/4] scsi: ufs: Allow WriteBooster on UFS 2.2 devices
2020-05-14 15:01 ` Stanley Chu
(?)
@ 2020-05-14 15:01 ` Stanley Chu
-1 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: beanhuo, cang, matthias.bgg, bvanassche, linux-mediatek,
linux-arm-kernel, linux-kernel, kuohong.wang, peter.wang,
chun-hung.wu, andy.teng, Stanley Chu
According to the UFS specification, WriteBooster is officially
supported by UFS 2.2.
Since UFS 2.2 specification has been finalized in JEDEC and
such devices have also showed up in the market, modify the
checking rule for ufshcd_wb_probe() to allow these devices to enable
WriteBooster.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufshcd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 41ad4501b0d0..b298bdd3e697 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6942,6 +6942,7 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
* UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES enabled
*/
if (dev_info->wspecversion >= 0x310 ||
+ dev_info->wspecversion == 0x220 ||
(hba->dev_quirks & UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES))
ufshcd_wb_probe(hba, desc_buf);
--
2.18.0
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 2/4] scsi: ufs: Allow WriteBooster on UFS 2.2 devices
@ 2020-05-14 15:01 ` Stanley Chu
0 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, Stanley Chu,
linux-arm-kernel, beanhuo
According to the UFS specification, WriteBooster is officially
supported by UFS 2.2.
Since UFS 2.2 specification has been finalized in JEDEC and
such devices have also showed up in the market, modify the
checking rule for ufshcd_wb_probe() to allow these devices to enable
WriteBooster.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufshcd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 41ad4501b0d0..b298bdd3e697 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6942,6 +6942,7 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
* UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES enabled
*/
if (dev_info->wspecversion >= 0x310 ||
+ dev_info->wspecversion == 0x220 ||
(hba->dev_quirks & UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES))
ufshcd_wb_probe(hba, desc_buf);
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 2/4] scsi: ufs: Allow WriteBooster on UFS 2.2 devices
@ 2020-05-14 15:01 ` Stanley Chu
0 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, Stanley Chu,
linux-arm-kernel, beanhuo
According to the UFS specification, WriteBooster is officially
supported by UFS 2.2.
Since UFS 2.2 specification has been finalized in JEDEC and
such devices have also showed up in the market, modify the
checking rule for ufshcd_wb_probe() to allow these devices to enable
WriteBooster.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufshcd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 41ad4501b0d0..b298bdd3e697 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6942,6 +6942,7 @@ static int ufs_get_device_desc(struct ufs_hba *hba)
* UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES enabled
*/
if (dev_info->wspecversion >= 0x310 ||
+ dev_info->wspecversion == 0x220 ||
(hba->dev_quirks & UFS_DEVICE_QUIRK_SUPPORT_EXTENDED_FEATURES))
ufshcd_wb_probe(hba, desc_buf);
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 3/4] scsi: ufs: Fix index of attributes query for WriteBooster feature
2020-05-14 15:01 ` Stanley Chu
(?)
@ 2020-05-14 15:01 ` Stanley Chu
-1 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: beanhuo, cang, matthias.bgg, bvanassche, linux-mediatek,
linux-arm-kernel, linux-kernel, kuohong.wang, peter.wang,
chun-hung.wu, andy.teng, Stanley Chu
For WriteBooster feature related attributes, the index used by
query shall be LUN ID if LU Dedicated buffer mode is enabled.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufs-sysfs.c | 13 +++++++++++--
drivers/scsi/ufs/ufshcd.c | 16 ++++++++++------
drivers/scsi/ufs/ufshcd.h | 2 +-
3 files changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
index a0b3763e1dc2..2d71d232a69d 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -637,7 +637,7 @@ static ssize_t _name##_show(struct device *dev, \
int ret; \
struct ufs_hba *hba = dev_get_drvdata(dev); \
if (ufshcd_is_wb_flags(QUERY_FLAG_IDN##_uname)) \
- index = ufshcd_wb_get_flag_index(hba); \
+ index = ufshcd_wb_get_query_index(hba); \
pm_runtime_get_sync(hba->dev); \
ret = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, \
QUERY_FLAG_IDN##_uname, index, &flag); \
@@ -680,6 +680,12 @@ static const struct attribute_group ufs_sysfs_flags_group = {
.attrs = ufs_sysfs_device_flags,
};
+static inline bool ufshcd_is_wb_attrs(enum attr_idn idn)
+{
+ return ((idn >= QUERY_ATTR_IDN_WB_FLUSH_STATUS) &&
+ (idn <= QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE));
+}
+
#define UFS_ATTRIBUTE(_name, _uname) \
static ssize_t _name##_show(struct device *dev, \
struct device_attribute *attr, char *buf) \
@@ -687,9 +693,12 @@ static ssize_t _name##_show(struct device *dev, \
struct ufs_hba *hba = dev_get_drvdata(dev); \
u32 value; \
int ret; \
+ u8 index = 0; \
+ if (ufshcd_is_wb_attrs(QUERY_ATTR_IDN##_uname)) \
+ index = ufshcd_wb_get_query_index(hba); \
pm_runtime_get_sync(hba->dev); \
ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, \
- QUERY_ATTR_IDN##_uname, 0, 0, &value); \
+ QUERY_ATTR_IDN##_uname, index, 0, &value); \
pm_runtime_put_sync(hba->dev); \
if (ret) \
return -EINVAL; \
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b298bdd3e697..169a3379e468 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5212,7 +5212,7 @@ static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable)
else
opcode = UPIU_QUERY_OPCODE_CLEAR_FLAG;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_flag_retry(hba, opcode,
QUERY_FLAG_IDN_WB_EN, index, NULL);
if (ret) {
@@ -5238,7 +5238,7 @@ static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set)
else
val = UPIU_QUERY_OPCODE_CLEAR_FLAG;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
return ufshcd_query_flag_retry(hba, val,
QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8,
index, NULL);
@@ -5261,7 +5261,7 @@ static int ufshcd_wb_buf_flush_enable(struct ufs_hba *hba)
if (!ufshcd_is_wb_allowed(hba) || hba->wb_buf_flush_enabled)
return 0;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG,
QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN,
index, NULL);
@@ -5283,7 +5283,7 @@ static int ufshcd_wb_buf_flush_disable(struct ufs_hba *hba)
if (!ufshcd_is_wb_allowed(hba) || !hba->wb_buf_flush_enabled)
return 0;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_CLEAR_FLAG,
QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN,
index, NULL);
@@ -5303,10 +5303,12 @@ static bool ufshcd_wb_presrv_usrspc_keep_vcc_on(struct ufs_hba *hba,
{
u32 cur_buf;
int ret;
+ u8 index;
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE,
- 0, 0, &cur_buf);
+ index, 0, &cur_buf);
if (ret) {
dev_err(hba->dev, "%s dCurWriteBoosterBufferSize read failed %d\n",
__func__, ret);
@@ -5329,6 +5331,7 @@ static bool ufshcd_wb_keep_vcc_on(struct ufs_hba *hba)
{
int ret;
u32 avail_buf;
+ u8 index;
if (!ufshcd_is_wb_allowed(hba))
return false;
@@ -5343,9 +5346,10 @@ static bool ufshcd_wb_keep_vcc_on(struct ufs_hba *hba)
* buffer (dCurrentWriteBoosterBufferSize). There's no point in
* keeping vcc on when current buffer is empty.
*/
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE,
- 0, 0, &avail_buf);
+ index, 0, &avail_buf);
if (ret) {
dev_warn(hba->dev, "%s dAvailableWriteBoosterBufferSize read failed %d\n",
__func__, ret);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 23a434c03c2a..ab0d180dad6c 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -861,7 +861,7 @@ static inline bool ufshcd_keep_autobkops_enabled_except_suspend(
return hba->caps & UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND;
}
-static inline u8 ufshcd_wb_get_flag_index(struct ufs_hba *hba)
+static inline u8 ufshcd_wb_get_query_index(struct ufs_hba *hba)
{
if (hba->dev_info.b_wb_buffer_type == WB_BUF_MODE_LU_DEDICATED)
return hba->dev_info.wb_dedicated_lu;
--
2.18.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 3/4] scsi: ufs: Fix index of attributes query for WriteBooster feature
@ 2020-05-14 15:01 ` Stanley Chu
0 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, Stanley Chu,
linux-arm-kernel, beanhuo
For WriteBooster feature related attributes, the index used by
query shall be LUN ID if LU Dedicated buffer mode is enabled.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufs-sysfs.c | 13 +++++++++++--
drivers/scsi/ufs/ufshcd.c | 16 ++++++++++------
drivers/scsi/ufs/ufshcd.h | 2 +-
3 files changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
index a0b3763e1dc2..2d71d232a69d 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -637,7 +637,7 @@ static ssize_t _name##_show(struct device *dev, \
int ret; \
struct ufs_hba *hba = dev_get_drvdata(dev); \
if (ufshcd_is_wb_flags(QUERY_FLAG_IDN##_uname)) \
- index = ufshcd_wb_get_flag_index(hba); \
+ index = ufshcd_wb_get_query_index(hba); \
pm_runtime_get_sync(hba->dev); \
ret = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, \
QUERY_FLAG_IDN##_uname, index, &flag); \
@@ -680,6 +680,12 @@ static const struct attribute_group ufs_sysfs_flags_group = {
.attrs = ufs_sysfs_device_flags,
};
+static inline bool ufshcd_is_wb_attrs(enum attr_idn idn)
+{
+ return ((idn >= QUERY_ATTR_IDN_WB_FLUSH_STATUS) &&
+ (idn <= QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE));
+}
+
#define UFS_ATTRIBUTE(_name, _uname) \
static ssize_t _name##_show(struct device *dev, \
struct device_attribute *attr, char *buf) \
@@ -687,9 +693,12 @@ static ssize_t _name##_show(struct device *dev, \
struct ufs_hba *hba = dev_get_drvdata(dev); \
u32 value; \
int ret; \
+ u8 index = 0; \
+ if (ufshcd_is_wb_attrs(QUERY_ATTR_IDN##_uname)) \
+ index = ufshcd_wb_get_query_index(hba); \
pm_runtime_get_sync(hba->dev); \
ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, \
- QUERY_ATTR_IDN##_uname, 0, 0, &value); \
+ QUERY_ATTR_IDN##_uname, index, 0, &value); \
pm_runtime_put_sync(hba->dev); \
if (ret) \
return -EINVAL; \
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b298bdd3e697..169a3379e468 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5212,7 +5212,7 @@ static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable)
else
opcode = UPIU_QUERY_OPCODE_CLEAR_FLAG;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_flag_retry(hba, opcode,
QUERY_FLAG_IDN_WB_EN, index, NULL);
if (ret) {
@@ -5238,7 +5238,7 @@ static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set)
else
val = UPIU_QUERY_OPCODE_CLEAR_FLAG;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
return ufshcd_query_flag_retry(hba, val,
QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8,
index, NULL);
@@ -5261,7 +5261,7 @@ static int ufshcd_wb_buf_flush_enable(struct ufs_hba *hba)
if (!ufshcd_is_wb_allowed(hba) || hba->wb_buf_flush_enabled)
return 0;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG,
QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN,
index, NULL);
@@ -5283,7 +5283,7 @@ static int ufshcd_wb_buf_flush_disable(struct ufs_hba *hba)
if (!ufshcd_is_wb_allowed(hba) || !hba->wb_buf_flush_enabled)
return 0;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_CLEAR_FLAG,
QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN,
index, NULL);
@@ -5303,10 +5303,12 @@ static bool ufshcd_wb_presrv_usrspc_keep_vcc_on(struct ufs_hba *hba,
{
u32 cur_buf;
int ret;
+ u8 index;
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE,
- 0, 0, &cur_buf);
+ index, 0, &cur_buf);
if (ret) {
dev_err(hba->dev, "%s dCurWriteBoosterBufferSize read failed %d\n",
__func__, ret);
@@ -5329,6 +5331,7 @@ static bool ufshcd_wb_keep_vcc_on(struct ufs_hba *hba)
{
int ret;
u32 avail_buf;
+ u8 index;
if (!ufshcd_is_wb_allowed(hba))
return false;
@@ -5343,9 +5346,10 @@ static bool ufshcd_wb_keep_vcc_on(struct ufs_hba *hba)
* buffer (dCurrentWriteBoosterBufferSize). There's no point in
* keeping vcc on when current buffer is empty.
*/
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE,
- 0, 0, &avail_buf);
+ index, 0, &avail_buf);
if (ret) {
dev_warn(hba->dev, "%s dAvailableWriteBoosterBufferSize read failed %d\n",
__func__, ret);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 23a434c03c2a..ab0d180dad6c 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -861,7 +861,7 @@ static inline bool ufshcd_keep_autobkops_enabled_except_suspend(
return hba->caps & UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND;
}
-static inline u8 ufshcd_wb_get_flag_index(struct ufs_hba *hba)
+static inline u8 ufshcd_wb_get_query_index(struct ufs_hba *hba)
{
if (hba->dev_info.b_wb_buffer_type == WB_BUF_MODE_LU_DEDICATED)
return hba->dev_info.wb_dedicated_lu;
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 3/4] scsi: ufs: Fix index of attributes query for WriteBooster feature
@ 2020-05-14 15:01 ` Stanley Chu
0 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, Stanley Chu,
linux-arm-kernel, beanhuo
For WriteBooster feature related attributes, the index used by
query shall be LUN ID if LU Dedicated buffer mode is enabled.
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufs-sysfs.c | 13 +++++++++++--
drivers/scsi/ufs/ufshcd.c | 16 ++++++++++------
drivers/scsi/ufs/ufshcd.h | 2 +-
3 files changed, 22 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-sysfs.c b/drivers/scsi/ufs/ufs-sysfs.c
index a0b3763e1dc2..2d71d232a69d 100644
--- a/drivers/scsi/ufs/ufs-sysfs.c
+++ b/drivers/scsi/ufs/ufs-sysfs.c
@@ -637,7 +637,7 @@ static ssize_t _name##_show(struct device *dev, \
int ret; \
struct ufs_hba *hba = dev_get_drvdata(dev); \
if (ufshcd_is_wb_flags(QUERY_FLAG_IDN##_uname)) \
- index = ufshcd_wb_get_flag_index(hba); \
+ index = ufshcd_wb_get_query_index(hba); \
pm_runtime_get_sync(hba->dev); \
ret = ufshcd_query_flag(hba, UPIU_QUERY_OPCODE_READ_FLAG, \
QUERY_FLAG_IDN##_uname, index, &flag); \
@@ -680,6 +680,12 @@ static const struct attribute_group ufs_sysfs_flags_group = {
.attrs = ufs_sysfs_device_flags,
};
+static inline bool ufshcd_is_wb_attrs(enum attr_idn idn)
+{
+ return ((idn >= QUERY_ATTR_IDN_WB_FLUSH_STATUS) &&
+ (idn <= QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE));
+}
+
#define UFS_ATTRIBUTE(_name, _uname) \
static ssize_t _name##_show(struct device *dev, \
struct device_attribute *attr, char *buf) \
@@ -687,9 +693,12 @@ static ssize_t _name##_show(struct device *dev, \
struct ufs_hba *hba = dev_get_drvdata(dev); \
u32 value; \
int ret; \
+ u8 index = 0; \
+ if (ufshcd_is_wb_attrs(QUERY_ATTR_IDN##_uname)) \
+ index = ufshcd_wb_get_query_index(hba); \
pm_runtime_get_sync(hba->dev); \
ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR, \
- QUERY_ATTR_IDN##_uname, 0, 0, &value); \
+ QUERY_ATTR_IDN##_uname, index, 0, &value); \
pm_runtime_put_sync(hba->dev); \
if (ret) \
return -EINVAL; \
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index b298bdd3e697..169a3379e468 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -5212,7 +5212,7 @@ static int ufshcd_wb_ctrl(struct ufs_hba *hba, bool enable)
else
opcode = UPIU_QUERY_OPCODE_CLEAR_FLAG;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_flag_retry(hba, opcode,
QUERY_FLAG_IDN_WB_EN, index, NULL);
if (ret) {
@@ -5238,7 +5238,7 @@ static int ufshcd_wb_toggle_flush_during_h8(struct ufs_hba *hba, bool set)
else
val = UPIU_QUERY_OPCODE_CLEAR_FLAG;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
return ufshcd_query_flag_retry(hba, val,
QUERY_FLAG_IDN_WB_BUFF_FLUSH_DURING_HIBERN8,
index, NULL);
@@ -5261,7 +5261,7 @@ static int ufshcd_wb_buf_flush_enable(struct ufs_hba *hba)
if (!ufshcd_is_wb_allowed(hba) || hba->wb_buf_flush_enabled)
return 0;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG,
QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN,
index, NULL);
@@ -5283,7 +5283,7 @@ static int ufshcd_wb_buf_flush_disable(struct ufs_hba *hba)
if (!ufshcd_is_wb_allowed(hba) || !hba->wb_buf_flush_enabled)
return 0;
- index = ufshcd_wb_get_flag_index(hba);
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_CLEAR_FLAG,
QUERY_FLAG_IDN_WB_BUFF_FLUSH_EN,
index, NULL);
@@ -5303,10 +5303,12 @@ static bool ufshcd_wb_presrv_usrspc_keep_vcc_on(struct ufs_hba *hba,
{
u32 cur_buf;
int ret;
+ u8 index;
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
QUERY_ATTR_IDN_CURR_WB_BUFF_SIZE,
- 0, 0, &cur_buf);
+ index, 0, &cur_buf);
if (ret) {
dev_err(hba->dev, "%s dCurWriteBoosterBufferSize read failed %d\n",
__func__, ret);
@@ -5329,6 +5331,7 @@ static bool ufshcd_wb_keep_vcc_on(struct ufs_hba *hba)
{
int ret;
u32 avail_buf;
+ u8 index;
if (!ufshcd_is_wb_allowed(hba))
return false;
@@ -5343,9 +5346,10 @@ static bool ufshcd_wb_keep_vcc_on(struct ufs_hba *hba)
* buffer (dCurrentWriteBoosterBufferSize). There's no point in
* keeping vcc on when current buffer is empty.
*/
+ index = ufshcd_wb_get_query_index(hba);
ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
QUERY_ATTR_IDN_AVAIL_WB_BUFF_SIZE,
- 0, 0, &avail_buf);
+ index, 0, &avail_buf);
if (ret) {
dev_warn(hba->dev, "%s dAvailableWriteBoosterBufferSize read failed %d\n",
__func__, ret);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 23a434c03c2a..ab0d180dad6c 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -861,7 +861,7 @@ static inline bool ufshcd_keep_autobkops_enabled_except_suspend(
return hba->caps & UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND;
}
-static inline u8 ufshcd_wb_get_flag_index(struct ufs_hba *hba)
+static inline u8 ufshcd_wb_get_query_index(struct ufs_hba *hba)
{
if (hba->dev_info.b_wb_buffer_type == WB_BUF_MODE_LU_DEDICATED)
return hba->dev_info.wb_dedicated_lu;
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCH v2 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend
2020-05-14 15:01 ` Stanley Chu
(?)
@ 2020-05-14 15:01 ` Stanley Chu
-1 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: beanhuo, cang, matthias.bgg, bvanassche, linux-mediatek,
linux-arm-kernel, linux-kernel, kuohong.wang, peter.wang,
chun-hung.wu, andy.teng, Stanley Chu
Currently UFS host driver promises VCC supply if UFS device
needs to do WriteBooster flush during runtime suspend.
However the UFS specification mentions,
"While the flushing operation is in progress, the device is
in Active power mode."
Therefore UFS host driver needs to promise more: Keep UFS
device as "Active power mode", otherwise UFS device shall not
do any flush if device enters Sleep or PowerDown power mode.
Fix this by not changing device power mode if WriteBooster
flush is required in ufshcd_suspend().
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufs.h | 1 -
drivers/scsi/ufs/ufshcd.c | 42 ++++++++++++++++++++-------------------
2 files changed, 22 insertions(+), 21 deletions(-)
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index b3135344ab3f..9e4bc2e97ada 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -577,7 +577,6 @@ struct ufs_dev_info {
u32 d_ext_ufs_feature_sup;
u8 b_wb_buffer_type;
u32 d_wb_alloc_units;
- bool keep_vcc_on;
u8 b_presrv_uspc_en;
};
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 169a3379e468..b9f7744ca2b4 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
!hba->dev_info.is_lu_power_on_wp) {
ufshcd_setup_vreg(hba, false);
} else if (!ufshcd_is_ufs_dev_active(hba)) {
- if (!hba->dev_info.keep_vcc_on)
- ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
+ ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
if (!ufshcd_is_link_active(hba)) {
ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
@@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
enum ufs_pm_level pm_lvl;
enum ufs_dev_pwr_mode req_dev_pwr_mode;
enum uic_link_state req_link_state;
+ bool keep_curr_dev_pwr_mode = false;
hba->pm_op_in_progress = 1;
if (!ufshcd_is_shutdown_pm(pm_op)) {
@@ -8227,27 +8227,29 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
ufshcd_disable_auto_bkops(hba);
}
/*
- * With wb enabled, if the bkops is enabled or if the
- * configured WB type is 70% full, keep vcc ON
- * for the device to flush the wb buffer
+ * If device needs to do BKOP or WB buffer flush during
+ * Hibern8, keep device power mode as "active power mode"
+ * and VCC supply.
*/
- if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
- ufshcd_wb_keep_vcc_on(hba))
- hba->dev_info.keep_vcc_on = true;
- else
- hba->dev_info.keep_vcc_on = false;
- } else {
- hba->dev_info.keep_vcc_on = false;
+ keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
+ (((req_link_state == UIC_LINK_HIBERN8_STATE) ||
+ ((req_link_state == UIC_LINK_ACTIVE_STATE) &&
+ ufshcd_is_auto_hibern8_enabled(hba))) &&
+ ufshcd_wb_keep_vcc_on(hba));
}
- if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
- ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
- !ufshcd_is_runtime_pm(pm_op))) {
- /* ensure that bkops is disabled */
- ufshcd_disable_auto_bkops(hba);
- ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
- if (ret)
- goto enable_gating;
+ if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
+ if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
+ !ufshcd_is_runtime_pm(pm_op)) {
+ /* ensure that bkops is disabled */
+ ufshcd_disable_auto_bkops(hba);
+ }
+
+ if (!keep_curr_dev_pwr_mode) {
+ ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
+ if (ret)
+ goto enable_gating;
+ }
}
flush_work(&hba->eeh_work);
--
2.18.0
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend
@ 2020-05-14 15:01 ` Stanley Chu
0 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, Stanley Chu,
linux-arm-kernel, beanhuo
Currently UFS host driver promises VCC supply if UFS device
needs to do WriteBooster flush during runtime suspend.
However the UFS specification mentions,
"While the flushing operation is in progress, the device is
in Active power mode."
Therefore UFS host driver needs to promise more: Keep UFS
device as "Active power mode", otherwise UFS device shall not
do any flush if device enters Sleep or PowerDown power mode.
Fix this by not changing device power mode if WriteBooster
flush is required in ufshcd_suspend().
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufs.h | 1 -
drivers/scsi/ufs/ufshcd.c | 42 ++++++++++++++++++++-------------------
2 files changed, 22 insertions(+), 21 deletions(-)
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index b3135344ab3f..9e4bc2e97ada 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -577,7 +577,6 @@ struct ufs_dev_info {
u32 d_ext_ufs_feature_sup;
u8 b_wb_buffer_type;
u32 d_wb_alloc_units;
- bool keep_vcc_on;
u8 b_presrv_uspc_en;
};
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 169a3379e468..b9f7744ca2b4 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
!hba->dev_info.is_lu_power_on_wp) {
ufshcd_setup_vreg(hba, false);
} else if (!ufshcd_is_ufs_dev_active(hba)) {
- if (!hba->dev_info.keep_vcc_on)
- ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
+ ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
if (!ufshcd_is_link_active(hba)) {
ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
@@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
enum ufs_pm_level pm_lvl;
enum ufs_dev_pwr_mode req_dev_pwr_mode;
enum uic_link_state req_link_state;
+ bool keep_curr_dev_pwr_mode = false;
hba->pm_op_in_progress = 1;
if (!ufshcd_is_shutdown_pm(pm_op)) {
@@ -8227,27 +8227,29 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
ufshcd_disable_auto_bkops(hba);
}
/*
- * With wb enabled, if the bkops is enabled or if the
- * configured WB type is 70% full, keep vcc ON
- * for the device to flush the wb buffer
+ * If device needs to do BKOP or WB buffer flush during
+ * Hibern8, keep device power mode as "active power mode"
+ * and VCC supply.
*/
- if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
- ufshcd_wb_keep_vcc_on(hba))
- hba->dev_info.keep_vcc_on = true;
- else
- hba->dev_info.keep_vcc_on = false;
- } else {
- hba->dev_info.keep_vcc_on = false;
+ keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
+ (((req_link_state == UIC_LINK_HIBERN8_STATE) ||
+ ((req_link_state == UIC_LINK_ACTIVE_STATE) &&
+ ufshcd_is_auto_hibern8_enabled(hba))) &&
+ ufshcd_wb_keep_vcc_on(hba));
}
- if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
- ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
- !ufshcd_is_runtime_pm(pm_op))) {
- /* ensure that bkops is disabled */
- ufshcd_disable_auto_bkops(hba);
- ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
- if (ret)
- goto enable_gating;
+ if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
+ if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
+ !ufshcd_is_runtime_pm(pm_op)) {
+ /* ensure that bkops is disabled */
+ ufshcd_disable_auto_bkops(hba);
+ }
+
+ if (!keep_curr_dev_pwr_mode) {
+ ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
+ if (ret)
+ goto enable_gating;
+ }
}
flush_work(&hba->eeh_work);
--
2.18.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 18+ messages in thread* [PATCH v2 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend
@ 2020-05-14 15:01 ` Stanley Chu
0 siblings, 0 replies; 18+ messages in thread
From: Stanley Chu @ 2020-05-14 15:01 UTC (permalink / raw)
To: linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb, asutoshd
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, Stanley Chu,
linux-arm-kernel, beanhuo
Currently UFS host driver promises VCC supply if UFS device
needs to do WriteBooster flush during runtime suspend.
However the UFS specification mentions,
"While the flushing operation is in progress, the device is
in Active power mode."
Therefore UFS host driver needs to promise more: Keep UFS
device as "Active power mode", otherwise UFS device shall not
do any flush if device enters Sleep or PowerDown power mode.
Fix this by not changing device power mode if WriteBooster
flush is required in ufshcd_suspend().
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
drivers/scsi/ufs/ufs.h | 1 -
drivers/scsi/ufs/ufshcd.c | 42 ++++++++++++++++++++-------------------
2 files changed, 22 insertions(+), 21 deletions(-)
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index b3135344ab3f..9e4bc2e97ada 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -577,7 +577,6 @@ struct ufs_dev_info {
u32 d_ext_ufs_feature_sup;
u8 b_wb_buffer_type;
u32 d_wb_alloc_units;
- bool keep_vcc_on;
u8 b_presrv_uspc_en;
};
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 169a3379e468..b9f7744ca2b4 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
!hba->dev_info.is_lu_power_on_wp) {
ufshcd_setup_vreg(hba, false);
} else if (!ufshcd_is_ufs_dev_active(hba)) {
- if (!hba->dev_info.keep_vcc_on)
- ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
+ ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
if (!ufshcd_is_link_active(hba)) {
ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
@@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
enum ufs_pm_level pm_lvl;
enum ufs_dev_pwr_mode req_dev_pwr_mode;
enum uic_link_state req_link_state;
+ bool keep_curr_dev_pwr_mode = false;
hba->pm_op_in_progress = 1;
if (!ufshcd_is_shutdown_pm(pm_op)) {
@@ -8227,27 +8227,29 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
ufshcd_disable_auto_bkops(hba);
}
/*
- * With wb enabled, if the bkops is enabled or if the
- * configured WB type is 70% full, keep vcc ON
- * for the device to flush the wb buffer
+ * If device needs to do BKOP or WB buffer flush during
+ * Hibern8, keep device power mode as "active power mode"
+ * and VCC supply.
*/
- if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
- ufshcd_wb_keep_vcc_on(hba))
- hba->dev_info.keep_vcc_on = true;
- else
- hba->dev_info.keep_vcc_on = false;
- } else {
- hba->dev_info.keep_vcc_on = false;
+ keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
+ (((req_link_state == UIC_LINK_HIBERN8_STATE) ||
+ ((req_link_state == UIC_LINK_ACTIVE_STATE) &&
+ ufshcd_is_auto_hibern8_enabled(hba))) &&
+ ufshcd_wb_keep_vcc_on(hba));
}
- if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
- ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
- !ufshcd_is_runtime_pm(pm_op))) {
- /* ensure that bkops is disabled */
- ufshcd_disable_auto_bkops(hba);
- ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
- if (ret)
- goto enable_gating;
+ if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
+ if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
+ !ufshcd_is_runtime_pm(pm_op)) {
+ /* ensure that bkops is disabled */
+ ufshcd_disable_auto_bkops(hba);
+ }
+
+ if (!keep_curr_dev_pwr_mode) {
+ ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
+ if (ret)
+ goto enable_gating;
+ }
}
flush_work(&hba->eeh_work);
--
2.18.0
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply related [flat|nested] 18+ messages in thread* Re: [PATCH v2 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend
2020-05-14 15:01 ` Stanley Chu
(?)
@ 2020-05-14 17:06 ` Asutosh Das (asd)
-1 siblings, 0 replies; 18+ messages in thread
From: Asutosh Das (asd) @ 2020-05-14 17:06 UTC (permalink / raw)
To: Stanley Chu, linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
Cc: beanhuo, cang, matthias.bgg, bvanassche, linux-mediatek,
linux-arm-kernel, linux-kernel, kuohong.wang, peter.wang,
chun-hung.wu, andy.teng
On 5/14/2020 8:01 AM, Stanley Chu wrote:
> Currently UFS host driver promises VCC supply if UFS device
> needs to do WriteBooster flush during runtime suspend.
>
> However the UFS specification mentions,
>
> "While the flushing operation is in progress, the device is
> in Active power mode."
>
> Therefore UFS host driver needs to promise more: Keep UFS
> device as "Active power mode", otherwise UFS device shall not
> do any flush if device enters Sleep or PowerDown power mode.
>
> Fix this by not changing device power mode if WriteBooster
> flush is required in ufshcd_suspend().
>
> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
> ---
> drivers/scsi/ufs/ufs.h | 1 -
> drivers/scsi/ufs/ufshcd.c | 42 ++++++++++++++++++++-------------------
> 2 files changed, 22 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index b3135344ab3f..9e4bc2e97ada 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -577,7 +577,6 @@ struct ufs_dev_info {
> u32 d_ext_ufs_feature_sup;
> u8 b_wb_buffer_type;
> u32 d_wb_alloc_units;
> - bool keep_vcc_on;
> u8 b_presrv_uspc_en;
> };
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 169a3379e468..b9f7744ca2b4 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
> !hba->dev_info.is_lu_power_on_wp) {
> ufshcd_setup_vreg(hba, false);
> } else if (!ufshcd_is_ufs_dev_active(hba)) {
> - if (!hba->dev_info.keep_vcc_on)
> - ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> if (!ufshcd_is_link_active(hba)) {
> ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
> ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
> @@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> enum ufs_pm_level pm_lvl;
> enum ufs_dev_pwr_mode req_dev_pwr_mode;
> enum uic_link_state req_link_state;
> + bool keep_curr_dev_pwr_mode = false;
>
> hba->pm_op_in_progress = 1;
> if (!ufshcd_is_shutdown_pm(pm_op)) {
> @@ -8227,27 +8227,29 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> ufshcd_disable_auto_bkops(hba);
> }
> /*
> - * With wb enabled, if the bkops is enabled or if the
> - * configured WB type is 70% full, keep vcc ON
> - * for the device to flush the wb buffer
> + * If device needs to do BKOP or WB buffer flush during
> + * Hibern8, keep device power mode as "active power mode"
> + * and VCC supply.
> */
> - if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
> - ufshcd_wb_keep_vcc_on(hba))
> - hba->dev_info.keep_vcc_on = true;
> - else
> - hba->dev_info.keep_vcc_on = false;
> - } else {
> - hba->dev_info.keep_vcc_on = false;
> + keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
> + (((req_link_state == UIC_LINK_HIBERN8_STATE) ||
> + ((req_link_state == UIC_LINK_ACTIVE_STATE) &&
> + ufshcd_is_auto_hibern8_enabled(hba))) &&
> + ufshcd_wb_keep_vcc_on(hba));
> }
>
This looks fine.
But I still think the delayed check of flush status should be done to
turn-off Vcc when flush is complete.
> - if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
> - ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> - !ufshcd_is_runtime_pm(pm_op))) {
> - /* ensure that bkops is disabled */
> - ufshcd_disable_auto_bkops(hba);
> - ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> - if (ret)
> - goto enable_gating;
> + if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
> + if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> + !ufshcd_is_runtime_pm(pm_op)) {
> + /* ensure that bkops is disabled */
> + ufshcd_disable_auto_bkops(hba);
> + }
> +
> + if (!keep_curr_dev_pwr_mode) {
> + ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> + if (ret)
> + goto enable_gating;
> + }
> }
>
> flush_work(&hba->eeh_work);
>
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend
@ 2020-05-14 17:06 ` Asutosh Das (asd)
0 siblings, 0 replies; 18+ messages in thread
From: Asutosh Das (asd) @ 2020-05-14 17:06 UTC (permalink / raw)
To: Stanley Chu, linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, linux-arm-kernel,
beanhuo
On 5/14/2020 8:01 AM, Stanley Chu wrote:
> Currently UFS host driver promises VCC supply if UFS device
> needs to do WriteBooster flush during runtime suspend.
>
> However the UFS specification mentions,
>
> "While the flushing operation is in progress, the device is
> in Active power mode."
>
> Therefore UFS host driver needs to promise more: Keep UFS
> device as "Active power mode", otherwise UFS device shall not
> do any flush if device enters Sleep or PowerDown power mode.
>
> Fix this by not changing device power mode if WriteBooster
> flush is required in ufshcd_suspend().
>
> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
> ---
> drivers/scsi/ufs/ufs.h | 1 -
> drivers/scsi/ufs/ufshcd.c | 42 ++++++++++++++++++++-------------------
> 2 files changed, 22 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index b3135344ab3f..9e4bc2e97ada 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -577,7 +577,6 @@ struct ufs_dev_info {
> u32 d_ext_ufs_feature_sup;
> u8 b_wb_buffer_type;
> u32 d_wb_alloc_units;
> - bool keep_vcc_on;
> u8 b_presrv_uspc_en;
> };
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 169a3379e468..b9f7744ca2b4 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
> !hba->dev_info.is_lu_power_on_wp) {
> ufshcd_setup_vreg(hba, false);
> } else if (!ufshcd_is_ufs_dev_active(hba)) {
> - if (!hba->dev_info.keep_vcc_on)
> - ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> if (!ufshcd_is_link_active(hba)) {
> ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
> ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
> @@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> enum ufs_pm_level pm_lvl;
> enum ufs_dev_pwr_mode req_dev_pwr_mode;
> enum uic_link_state req_link_state;
> + bool keep_curr_dev_pwr_mode = false;
>
> hba->pm_op_in_progress = 1;
> if (!ufshcd_is_shutdown_pm(pm_op)) {
> @@ -8227,27 +8227,29 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> ufshcd_disable_auto_bkops(hba);
> }
> /*
> - * With wb enabled, if the bkops is enabled or if the
> - * configured WB type is 70% full, keep vcc ON
> - * for the device to flush the wb buffer
> + * If device needs to do BKOP or WB buffer flush during
> + * Hibern8, keep device power mode as "active power mode"
> + * and VCC supply.
> */
> - if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
> - ufshcd_wb_keep_vcc_on(hba))
> - hba->dev_info.keep_vcc_on = true;
> - else
> - hba->dev_info.keep_vcc_on = false;
> - } else {
> - hba->dev_info.keep_vcc_on = false;
> + keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
> + (((req_link_state == UIC_LINK_HIBERN8_STATE) ||
> + ((req_link_state == UIC_LINK_ACTIVE_STATE) &&
> + ufshcd_is_auto_hibern8_enabled(hba))) &&
> + ufshcd_wb_keep_vcc_on(hba));
> }
>
This looks fine.
But I still think the delayed check of flush status should be done to
turn-off Vcc when flush is complete.
> - if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
> - ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> - !ufshcd_is_runtime_pm(pm_op))) {
> - /* ensure that bkops is disabled */
> - ufshcd_disable_auto_bkops(hba);
> - ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> - if (ret)
> - goto enable_gating;
> + if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
> + if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> + !ufshcd_is_runtime_pm(pm_op)) {
> + /* ensure that bkops is disabled */
> + ufshcd_disable_auto_bkops(hba);
> + }
> +
> + if (!keep_curr_dev_pwr_mode) {
> + ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> + if (ret)
> + goto enable_gating;
> + }
> }
>
> flush_work(&hba->eeh_work);
>
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 18+ messages in thread* Re: [PATCH v2 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend
@ 2020-05-14 17:06 ` Asutosh Das (asd)
0 siblings, 0 replies; 18+ messages in thread
From: Asutosh Das (asd) @ 2020-05-14 17:06 UTC (permalink / raw)
To: Stanley Chu, linux-scsi, martin.petersen, avri.altman, alim.akhtar, jejb
Cc: bvanassche, andy.teng, chun-hung.wu, kuohong.wang, linux-kernel,
cang, linux-mediatek, peter.wang, matthias.bgg, linux-arm-kernel,
beanhuo
On 5/14/2020 8:01 AM, Stanley Chu wrote:
> Currently UFS host driver promises VCC supply if UFS device
> needs to do WriteBooster flush during runtime suspend.
>
> However the UFS specification mentions,
>
> "While the flushing operation is in progress, the device is
> in Active power mode."
>
> Therefore UFS host driver needs to promise more: Keep UFS
> device as "Active power mode", otherwise UFS device shall not
> do any flush if device enters Sleep or PowerDown power mode.
>
> Fix this by not changing device power mode if WriteBooster
> flush is required in ufshcd_suspend().
>
> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
> ---
> drivers/scsi/ufs/ufs.h | 1 -
> drivers/scsi/ufs/ufshcd.c | 42 ++++++++++++++++++++-------------------
> 2 files changed, 22 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index b3135344ab3f..9e4bc2e97ada 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -577,7 +577,6 @@ struct ufs_dev_info {
> u32 d_ext_ufs_feature_sup;
> u8 b_wb_buffer_type;
> u32 d_wb_alloc_units;
> - bool keep_vcc_on;
> u8 b_presrv_uspc_en;
> };
>
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 169a3379e468..b9f7744ca2b4 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
> !hba->dev_info.is_lu_power_on_wp) {
> ufshcd_setup_vreg(hba, false);
> } else if (!ufshcd_is_ufs_dev_active(hba)) {
> - if (!hba->dev_info.keep_vcc_on)
> - ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> + ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> if (!ufshcd_is_link_active(hba)) {
> ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
> ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
> @@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> enum ufs_pm_level pm_lvl;
> enum ufs_dev_pwr_mode req_dev_pwr_mode;
> enum uic_link_state req_link_state;
> + bool keep_curr_dev_pwr_mode = false;
>
> hba->pm_op_in_progress = 1;
> if (!ufshcd_is_shutdown_pm(pm_op)) {
> @@ -8227,27 +8227,29 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
> ufshcd_disable_auto_bkops(hba);
> }
> /*
> - * With wb enabled, if the bkops is enabled or if the
> - * configured WB type is 70% full, keep vcc ON
> - * for the device to flush the wb buffer
> + * If device needs to do BKOP or WB buffer flush during
> + * Hibern8, keep device power mode as "active power mode"
> + * and VCC supply.
> */
> - if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
> - ufshcd_wb_keep_vcc_on(hba))
> - hba->dev_info.keep_vcc_on = true;
> - else
> - hba->dev_info.keep_vcc_on = false;
> - } else {
> - hba->dev_info.keep_vcc_on = false;
> + keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
> + (((req_link_state == UIC_LINK_HIBERN8_STATE) ||
> + ((req_link_state == UIC_LINK_ACTIVE_STATE) &&
> + ufshcd_is_auto_hibern8_enabled(hba))) &&
> + ufshcd_wb_keep_vcc_on(hba));
> }
>
This looks fine.
But I still think the delayed check of flush status should be done to
turn-off Vcc when flush is complete.
> - if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
> - ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> - !ufshcd_is_runtime_pm(pm_op))) {
> - /* ensure that bkops is disabled */
> - ufshcd_disable_auto_bkops(hba);
> - ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> - if (ret)
> - goto enable_gating;
> + if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
> + if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> + !ufshcd_is_runtime_pm(pm_op)) {
> + /* ensure that bkops is disabled */
> + ufshcd_disable_auto_bkops(hba);
> + }
> +
> + if (!keep_curr_dev_pwr_mode) {
> + ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> + if (ret)
> + goto enable_gating;
> + }
> }
>
> flush_work(&hba->eeh_work);
>
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
^ permalink raw reply [flat|nested] 18+ messages in thread