All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
To: stable@vger.kernel.org
Cc: gregkh@linuxfoundation.org, "wuxu.wu" <wuxu.wu@huawei.com>,
	Mark Brown <broonie@kernel.org>,
	Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Subject: [PATCH v2 for 4.4, 4.9] spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls
Date: Fri, 15 May 2020 09:42:45 +0900	[thread overview]
Message-ID: <20200515004245.1069864-1-nobuhiro1.iwamatsu@toshiba.co.jp> (raw)

From: "wuxu.wu" <wuxu.wu@huawei.com>

commit 19b61392c5a852b4e8a0bf35aecb969983c5932d upstream.

dw_spi_irq() and dw_spi_transfer_one concurrent calls.

I find a panic in dw_writer(): txw = *(u8 *)(dws->tx), when dw->tx==null,
dw->len==4, and dw->tx_end==1.

When tpm driver's message overtime dw_spi_irq() and dw_spi_transfer_one
may concurrent visit dw_spi, so I think dw_spi structure lack of protection.

Otherwise dw_spi_transfer_one set dw rx/tx buffer and then open irq,
store dw rx/tx instructions and other cores handle irq load dw rx/tx
instructions may out of order.

	[ 1025.321302] Call trace:
	...
	[ 1025.321319]  __crash_kexec+0x98/0x148
	[ 1025.321323]  panic+0x17c/0x314
	[ 1025.321329]  die+0x29c/0x2e8
	[ 1025.321334]  die_kernel_fault+0x68/0x78
	[ 1025.321337]  __do_kernel_fault+0x90/0xb0
	[ 1025.321346]  do_page_fault+0x88/0x500
	[ 1025.321347]  do_translation_fault+0xa8/0xb8
	[ 1025.321349]  do_mem_abort+0x68/0x118
	[ 1025.321351]  el1_da+0x20/0x8c
	[ 1025.321362]  dw_writer+0xc8/0xd0
	[ 1025.321364]  interrupt_transfer+0x60/0x110
	[ 1025.321365]  dw_spi_irq+0x48/0x70
	...

Signed-off-by: wuxu.wu <wuxu.wu@huawei.com>
Link: https://lore.kernel.org/r/1577849981-31489-1-git-send-email-wuxu.wu@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp>
---
 drivers/spi/spi-dw.c | 15 ++++++++++++---
 drivers/spi/spi-dw.h |  1 +
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 87a0e47eeae64..4edd38d03b939 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -180,9 +180,11 @@ static inline u32 rx_max(struct dw_spi *dws)
 
 static void dw_writer(struct dw_spi *dws)
 {
-	u32 max = tx_max(dws);
+	u32 max;
 	u16 txw = 0;
 
+	spin_lock(&dws->buf_lock);
+	max = tx_max(dws);
 	while (max--) {
 		/* Set the tx word if the transfer's original "tx" is not null */
 		if (dws->tx_end - dws->len) {
@@ -194,13 +196,16 @@ static void dw_writer(struct dw_spi *dws)
 		dw_write_io_reg(dws, DW_SPI_DR, txw);
 		dws->tx += dws->n_bytes;
 	}
+	spin_unlock(&dws->buf_lock);
 }
 
 static void dw_reader(struct dw_spi *dws)
 {
-	u32 max = rx_max(dws);
+	u32 max;
 	u16 rxw;
 
+	spin_lock(&dws->buf_lock);
+	max = rx_max(dws);
 	while (max--) {
 		rxw = dw_read_io_reg(dws, DW_SPI_DR);
 		/* Care rx only if the transfer's original "rx" is not null */
@@ -212,6 +217,7 @@ static void dw_reader(struct dw_spi *dws)
 		}
 		dws->rx += dws->n_bytes;
 	}
+	spin_unlock(&dws->buf_lock);
 }
 
 static void int_error_stop(struct dw_spi *dws, const char *msg)
@@ -284,6 +290,7 @@ static int dw_spi_transfer_one(struct spi_master *master,
 {
 	struct dw_spi *dws = spi_master_get_devdata(master);
 	struct chip_data *chip = spi_get_ctldata(spi);
+	unsigned long flags;
 	u8 imask = 0;
 	u16 txlevel = 0;
 	u16 clk_div;
@@ -291,12 +298,13 @@ static int dw_spi_transfer_one(struct spi_master *master,
 	int ret;
 
 	dws->dma_mapped = 0;
-
+	spin_lock_irqsave(&dws->buf_lock, flags);
 	dws->tx = (void *)transfer->tx_buf;
 	dws->tx_end = dws->tx + transfer->len;
 	dws->rx = transfer->rx_buf;
 	dws->rx_end = dws->rx + transfer->len;
 	dws->len = transfer->len;
+	spin_unlock_irqrestore(&dws->buf_lock, flags);
 
 	spi_enable_chip(dws, 0);
 
@@ -488,6 +496,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 	dws->dma_inited = 0;
 	dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR);
 	snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num);
+	spin_lock_init(&dws->buf_lock);
 
 	ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dws->name, master);
 	if (ret < 0) {
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 35589a270468d..d05b216ea3f87 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -117,6 +117,7 @@ struct dw_spi {
 	size_t			len;
 	void			*tx;
 	void			*tx_end;
+	spinlock_t		buf_lock;
 	void			*rx;
 	void			*rx_end;
 	int			dma_mapped;
-- 
2.26.0


             reply	other threads:[~2020-05-15  0:43 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-15  0:42 Nobuhiro Iwamatsu [this message]
2020-05-15  8:51 ` [PATCH v2 for 4.4, 4.9] spi: spi-dw: Add lock protect dw_spi rx/tx to prevent concurrent calls Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200515004245.1069864-1-nobuhiro1.iwamatsu@toshiba.co.jp \
    --to=nobuhiro1.iwamatsu@toshiba.co.jp \
    --cc=broonie@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=stable@vger.kernel.org \
    --cc=wuxu.wu@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.