From: Vaibhav Jain <vaibhav@linux.ibm.com> To: linuxppc-dev@lists.ozlabs.org, linux-nvdimm@lists.01.org Cc: Vaibhav Jain <vaibhav@linux.ibm.com>, "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>, Michael Ellerman <mpe@ellerman.id.au> Subject: [RFC PATCH 0/4] powerpc/papr_scm: Add support for reporting NVDIMM performance statistics Date: Mon, 18 May 2020 16:38:10 +0530 [thread overview] Message-ID: <20200518110814.145644-1-vaibhav@linux.ibm.com> (raw) The patch-set proposes to add support for fetching and reporting performance statistics for PAPR compliant NVDIMMs as described in documentation for H_SCM_PERFORMANCE_STATS hcall Ref[1]. The patch-set also implements mechanisms to expose NVDIMM performance stats via sysfs and newly introduced PDSMs[2] for libndctl. This patch-set combined with corresponding ndctl and libndctl changes proposed at Ref[3] should enable user to fetch PAPR compliant NVDIMMs using following command: # ndctl list -D --stats [ { "dev":"nmem0", "stats":{ "Controller Reset Count":2, "Controller Reset Elapsed Time":603331, "Power-on Seconds":603931, "Life Remaining":"100%", "Critical Resource Utilization":"0%", "Host Load Count":5781028, "Host Store Count":8966800, "Host Load Duration":975895365, "Host Store Duration":716230690, "Media Read Count":0, "Media Write Count":6313, "Media Read Duration":0, "Media Write Duration":9679615, "Cache Read Hit Count":5781028, "Cache Write Hit Count":8442479, "Fast Write Count":8969912 } } ] The patchset is dependent on existing patch-set "[PATCH v7 0/5] powerpc/papr_scm: Add support for reporting nvdimm health" available at Ref[2] that adds support for reporting PAPR compliant NVDIMMs in 'papr_scm' kernel module. Structure of the patch-set ========================== The patch-set starts with implementing functionality in papr_scm module to issue H_SCM_PERFORMANCE_STATS hcall, fetch & parse dimm performance stats and exposing them as a PAPR specific libnvdimm attribute named 'perf_stats' Patch-2 introduces a new PDSM named FETCH_PERF_STATS that can be issued by libndctl asking papr_scm to issue the H_SCM_PERFORMANCE_STATS hcall using helpers introduced earlier and storing the results in a dimm specific perf-stats-buffer. Patch-3 introduces a new PDSM named READ_PERF_STATS that can be issued by libndctl to read the perf-stats-buffer in an incremental manner to workaround the 256-bytes envelop limitation of libnvdimm. Finally Patch-4 introduces a new PDSM named GET_PERF_STAT that can be issued by libndctl to read values of a specific NVDIMM performance stat like "Life Remaining". References ========== [1] Documentation/powerpc/papr_hcals.rst [2] https://lore.kernel.org/linux-nvdimm/20200508104922.72565-1-vaibhav@linux.ibm.com/ [3] https://github.com/vaibhav92/ndctl/tree/papr_scm_stats_v1 Vaibhav Jain (4): powerpc/papr_scm: Fetch nvdimm performance stats from PHYP powerpc/papr_scm: Add support for PAPR_SCM_PDSM_FETCH_PERF_STATS powerpc/papr_scm: Implement support for PAPR_SCM_PDSM_READ_PERF_STATS powerpc/papr_scm: Add support for PDSM GET_PERF_STAT Documentation/ABI/testing/sysfs-bus-papr-scm | 27 ++ arch/powerpc/include/uapi/asm/papr_scm_pdsm.h | 60 +++ arch/powerpc/platforms/pseries/papr_scm.c | 391 ++++++++++++++++++ 3 files changed, 478 insertions(+) -- 2.26.2 _______________________________________________ Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
WARNING: multiple messages have this Message-ID (diff)
From: Vaibhav Jain <vaibhav@linux.ibm.com> To: linuxppc-dev@lists.ozlabs.org, linux-nvdimm@lists.01.org Cc: Santosh Sivaraj <santosh@fossix.org>, Oliver O'Halloran <oohall@gmail.com>, "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>, Vaibhav Jain <vaibhav@linux.ibm.com>, Dan Williams <dan.j.williams@intel.com> Subject: [RFC PATCH 0/4] powerpc/papr_scm: Add support for reporting NVDIMM performance statistics Date: Mon, 18 May 2020 16:38:10 +0530 [thread overview] Message-ID: <20200518110814.145644-1-vaibhav@linux.ibm.com> (raw) The patch-set proposes to add support for fetching and reporting performance statistics for PAPR compliant NVDIMMs as described in documentation for H_SCM_PERFORMANCE_STATS hcall Ref[1]. The patch-set also implements mechanisms to expose NVDIMM performance stats via sysfs and newly introduced PDSMs[2] for libndctl. This patch-set combined with corresponding ndctl and libndctl changes proposed at Ref[3] should enable user to fetch PAPR compliant NVDIMMs using following command: # ndctl list -D --stats [ { "dev":"nmem0", "stats":{ "Controller Reset Count":2, "Controller Reset Elapsed Time":603331, "Power-on Seconds":603931, "Life Remaining":"100%", "Critical Resource Utilization":"0%", "Host Load Count":5781028, "Host Store Count":8966800, "Host Load Duration":975895365, "Host Store Duration":716230690, "Media Read Count":0, "Media Write Count":6313, "Media Read Duration":0, "Media Write Duration":9679615, "Cache Read Hit Count":5781028, "Cache Write Hit Count":8442479, "Fast Write Count":8969912 } } ] The patchset is dependent on existing patch-set "[PATCH v7 0/5] powerpc/papr_scm: Add support for reporting nvdimm health" available at Ref[2] that adds support for reporting PAPR compliant NVDIMMs in 'papr_scm' kernel module. Structure of the patch-set ========================== The patch-set starts with implementing functionality in papr_scm module to issue H_SCM_PERFORMANCE_STATS hcall, fetch & parse dimm performance stats and exposing them as a PAPR specific libnvdimm attribute named 'perf_stats' Patch-2 introduces a new PDSM named FETCH_PERF_STATS that can be issued by libndctl asking papr_scm to issue the H_SCM_PERFORMANCE_STATS hcall using helpers introduced earlier and storing the results in a dimm specific perf-stats-buffer. Patch-3 introduces a new PDSM named READ_PERF_STATS that can be issued by libndctl to read the perf-stats-buffer in an incremental manner to workaround the 256-bytes envelop limitation of libnvdimm. Finally Patch-4 introduces a new PDSM named GET_PERF_STAT that can be issued by libndctl to read values of a specific NVDIMM performance stat like "Life Remaining". References ========== [1] Documentation/powerpc/papr_hcals.rst [2] https://lore.kernel.org/linux-nvdimm/20200508104922.72565-1-vaibhav@linux.ibm.com/ [3] https://github.com/vaibhav92/ndctl/tree/papr_scm_stats_v1 Vaibhav Jain (4): powerpc/papr_scm: Fetch nvdimm performance stats from PHYP powerpc/papr_scm: Add support for PAPR_SCM_PDSM_FETCH_PERF_STATS powerpc/papr_scm: Implement support for PAPR_SCM_PDSM_READ_PERF_STATS powerpc/papr_scm: Add support for PDSM GET_PERF_STAT Documentation/ABI/testing/sysfs-bus-papr-scm | 27 ++ arch/powerpc/include/uapi/asm/papr_scm_pdsm.h | 60 +++ arch/powerpc/platforms/pseries/papr_scm.c | 391 ++++++++++++++++++ 3 files changed, 478 insertions(+) -- 2.26.2
next reply other threads:[~2020-05-18 11:08 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-18 11:08 Vaibhav Jain [this message] 2020-05-18 11:08 ` [RFC PATCH 0/4] powerpc/papr_scm: Add support for reporting NVDIMM performance statistics Vaibhav Jain 2020-05-18 11:08 ` [RFC PATCH 1/4] powerpc/papr_scm: Fetch nvdimm performance stats from PHYP Vaibhav Jain 2020-05-18 11:08 ` Vaibhav Jain 2020-05-18 11:08 ` [RFC PATCH 2/4] powerpc/papr_scm: Add support for PAPR_SCM_PDSM_FETCH_PERF_STATS Vaibhav Jain 2020-05-18 11:08 ` Vaibhav Jain 2020-05-18 11:08 ` [RFC PATCH 3/4] powerpc/papr_scm: Implement support for PAPR_SCM_PDSM_READ_PERF_STATS Vaibhav Jain 2020-05-18 11:08 ` Vaibhav Jain 2020-05-18 11:08 ` [RFC PATCH 4/4] powerpc/papr_scm: Add support for PDSM GET_PERF_STAT Vaibhav Jain 2020-05-18 11:08 ` Vaibhav Jain 2020-10-21 16:52 ` [RFC PATCH 0/4] powerpc/papr_scm: Add support for reporting NVDIMM performance statistics Michal Suchánek 2020-10-21 16:52 ` Michal Suchánek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200518110814.145644-1-vaibhav@linux.ibm.com \ --to=vaibhav@linux.ibm.com \ --cc=aneesh.kumar@linux.ibm.com \ --cc=linux-nvdimm@lists.01.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=mpe@ellerman.id.au \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.