All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tali Perry <tali.perry1@gmail.com>
To: ofery@google.com, brendanhiggins@google.com,
	avifishman70@gmail.com, tmaimon77@gmail.com, kfting@nuvoton.com,
	venture@google.com, yuenn@google.com, benjaminfair@google.com,
	robh+dt@kernel.org, wsa@the-dreams.de,
	andriy.shevchenko@linux.intel.com
Cc: linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org,
	openbmc@lists.ozlabs.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Tali Perry <tali.perry1@gmail.com>
Subject: [PATCH v11 1/3] dt-bindings: i2c: npcm7xx: add NPCM I2C controller
Date: Wed, 20 May 2020 12:51:11 +0300	[thread overview]
Message-ID: <20200520095113.185414-2-tali.perry1@gmail.com> (raw)
In-Reply-To: <20200520095113.185414-1-tali.perry1@gmail.com>

Added device tree binding documentation for Nuvoton BMC
NPCM I2C controller.

Signed-off-by: Tali Perry <tali.perry1@gmail.com>
---
 .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml     | 62 +++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml

diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
new file mode 100644
index 000000000000..fb4293f11461
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
+
+description: |
+  The NPCM750x includes sixteen I2C bus controllers. All Controllers support
+  both master and slave mode. Each controller can switch between master and slave
+  at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
+  RX.
+
+maintainers:
+  - Tali Perry <tali.perry1@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm7xx-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Reference clock for the I2C bus
+
+  bus-frequency:
+    description: Desired I2C bus clock frequency in Hz. If not specified,
+                 the default 100 kHz frequency will be used.
+                 possible values are 100000, 400000 and 1000000.
+    default: 100000
+    enum: [100000, 400000, 1000000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c0: i2c@80000 {
+        compatible = "nuvoton,npcm750-i2c";
+        reg = <0x80000 0x1000>;
+        clocks = <&clk NPCM7XX_CLK_APB2>;
+        bus-frequency = <100000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&smb0_pins>;
+    };
+
+...
-- 
2.22.0


WARNING: multiple messages have this Message-ID (diff)
From: Tali Perry <tali.perry1@gmail.com>
To: ofery@google.com, brendanhiggins@google.com,
	avifishman70@gmail.com, tmaimon77@gmail.com, kfting@nuvoton.com,
	venture@google.com, yuenn@google.com, benjaminfair@google.com,
	robh+dt@kernel.org, wsa@the-dreams.de,
	andriy.shevchenko@linux.intel.com
Cc: devicetree@vger.kernel.org, openbmc@lists.ozlabs.org,
	linux-kernel@vger.kernel.org, Tali Perry <tali.perry1@gmail.com>,
	linux-i2c@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v11 1/3] dt-bindings: i2c: npcm7xx: add NPCM I2C controller
Date: Wed, 20 May 2020 12:51:11 +0300	[thread overview]
Message-ID: <20200520095113.185414-2-tali.perry1@gmail.com> (raw)
In-Reply-To: <20200520095113.185414-1-tali.perry1@gmail.com>

Added device tree binding documentation for Nuvoton BMC
NPCM I2C controller.

Signed-off-by: Tali Perry <tali.perry1@gmail.com>
---
 .../bindings/i2c/nuvoton,npcm7xx-i2c.yaml     | 62 +++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml

diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
new file mode 100644
index 000000000000..fb4293f11461
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/nuvoton,npcm7xx-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
+
+description: |
+  The NPCM750x includes sixteen I2C bus controllers. All Controllers support
+  both master and slave mode. Each controller can switch between master and slave
+  at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
+  RX.
+
+maintainers:
+  - Tali Perry <tali.perry1@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - nuvoton,npcm7xx-i2c
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: Reference clock for the I2C bus
+
+  bus-frequency:
+    description: Desired I2C bus clock frequency in Hz. If not specified,
+                 the default 100 kHz frequency will be used.
+                 possible values are 100000, 400000 and 1000000.
+    default: 100000
+    enum: [100000, 400000, 1000000]
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c0: i2c@80000 {
+        compatible = "nuvoton,npcm750-i2c";
+        reg = <0x80000 0x1000>;
+        clocks = <&clk NPCM7XX_CLK_APB2>;
+        bus-frequency = <100000>;
+        interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&smb0_pins>;
+    };
+
+...
-- 
2.22.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-05-20  9:52 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-20  9:51 [PATCH v11 0/3] i2c: npcm7xx: add NPCM i2c controller driver Tali Perry
2020-05-20  9:51 ` Tali Perry [this message]
2020-05-20  9:51   ` [PATCH v11 1/3] dt-bindings: i2c: npcm7xx: add NPCM I2C controller Tali Perry
2020-05-21 14:08   ` Rob Herring
2020-05-21 14:08     ` Rob Herring
2020-05-20  9:51 ` [PATCH v11 2/3] i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver Tali Perry
2020-05-20  9:51   ` Tali Perry
2020-05-20 10:24   ` Andy Shevchenko
2020-05-20 10:24     ` Andy Shevchenko
2020-05-20 11:37     ` Avi Fishman
2020-05-20 11:37       ` Avi Fishman
2020-05-20 11:37       ` Avi Fishman
2020-05-20 11:49       ` Andy Shevchenko
2020-05-20 11:49         ` Andy Shevchenko
2020-05-20  9:51 ` [PATCH v11 3/3] i2c: npcm7xx: Add support for slave mode for Nuvoton Tali Perry
2020-05-20  9:51   ` Tali Perry

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200520095113.185414-2-tali.perry1@gmail.com \
    --to=tali.perry1@gmail.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=avifishman70@gmail.com \
    --cc=benjaminfair@google.com \
    --cc=brendanhiggins@google.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kfting@nuvoton.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ofery@google.com \
    --cc=openbmc@lists.ozlabs.org \
    --cc=robh+dt@kernel.org \
    --cc=tmaimon77@gmail.com \
    --cc=venture@google.com \
    --cc=wsa@the-dreams.de \
    --cc=yuenn@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.