[PATCH 0/3] xfs: fix stale disk exposure after crash

[PATCH 0/3] xfs: fix stale disk exposure after crash

[Darrick J. Wong]

Hi all,

These three patches try to shrink the window during which a crash during
writeback can expose stale disk contents.  The first patch causes
delalloc reservations to be converted to unwritten extents for any
writeback that's going on within EOF.  The second patch fixes a minor
error encountered during writeback; and the third patch fixes
speculative preallocation to work when the EOF block could be unwritten.

If you're going to start using this mess, you probably ought to just
pull from my git trees, which are linked below.

This is an extraordinary way to destroy everything.  Enjoy!
Comments and questions are, as always, welcome.

--D

kernel git tree:
https://git.kernel.org/cgit/linux/kernel/git/djwong/xfs-linux.git/log/?h=stale-exposure

xfsprogs git tree:
https://git.kernel.org/cgit/linux/kernel/git/djwong/xfsprogs-dev.git/log/?h=stale-exposure

[PATCH 1/3] xfs: force writes to delalloc regions to unwritten

[Darrick J. Wong]

From: Darrick J. Wong <darrick.wong@oracle.com>

When writing to a delalloc region in the data fork, commit the new
allocations (of the da reservation) as unwritten so that the mappings
are only marked written once writeback completes successfully.  This
fixes the problem of stale data exposure if the system goes down during
targeted writeback of a specific region of a file, as tested by
generic/042.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 fs/xfs/libxfs/xfs_bmap.c |   28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)


diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
index fda13cd7add0..825d170e1503 100644
--- a/fs/xfs/libxfs/xfs_bmap.c
+++ b/fs/xfs/libxfs/xfs_bmap.c
@@ -4193,17 +4193,7 @@ xfs_bmapi_allocate(
 	bma->got.br_blockcount = bma->length;
 	bma->got.br_state = XFS_EXT_NORM;
 
-	/*
-	 * In the data fork, a wasdelay extent has been initialized, so
-	 * shouldn't be flagged as unwritten.
-	 *
-	 * For the cow fork, however, we convert delalloc reservations
-	 * (extents allocated for speculative preallocation) to
-	 * allocated unwritten extents, and only convert the unwritten
-	 * extents to real extents when we're about to write the data.
-	 */
-	if ((!bma->wasdel || (bma->flags & XFS_BMAPI_COWFORK)) &&
-	    (bma->flags & XFS_BMAPI_PREALLOC))
+	if (bma->flags & XFS_BMAPI_PREALLOC)
 		bma->got.br_state = XFS_EXT_UNWRITTEN;
 
 	if (bma->wasdel)
@@ -4611,8 +4601,24 @@ xfs_bmapi_convert_delalloc(
 	bma.offset = bma.got.br_startoff;
 	bma.length = max_t(xfs_filblks_t, bma.got.br_blockcount, MAXEXTLEN);
 	bma.minleft = xfs_bmapi_minleft(tp, ip, whichfork);
+
+	/*
+	 * When we're converting the delalloc reservations backing dirty pages
+	 * in the page cache, we must be careful about how we create the new
+	 * extents:
+	 *
+	 * New CoW fork extents are created unwritten, turned into real extents
+	 * when we're about to write the data to disk, and mapped into the data
+	 * fork after the write finishes.  End of story.
+	 *
+	 * New data fork extents must be mapped in as unwritten and converted
+	 * to real extents after the write succeeds to avoid exposing stale
+	 * disk contents if we crash.
+	 */
 	if (whichfork == XFS_COW_FORK)
 		bma.flags = XFS_BMAPI_COWFORK | XFS_BMAPI_PREALLOC;
+	else
+		bma.flags = XFS_BMAPI_PREALLOC;
 
 	if (!xfs_iext_peek_prev_extent(ifp, &bma.icur, &bma.prev))
 		bma.prev.br_startoff = NULLFILEOFF;

Re: [PATCH 1/3] xfs: force writes to delalloc regions to unwritten

[Brian Foster]

On Mon, May 18, 2020 at 05:49:11PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> When writing to a delalloc region in the data fork, commit the new
> allocations (of the da reservation) as unwritten so that the mappings
> are only marked written once writeback completes successfully.  This
> fixes the problem of stale data exposure if the system goes down during
> targeted writeback of a specific region of a file, as tested by
> generic/042.
> 

We could probably add generic/042 into the auto group once this patch
lands.

> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> Reviewed-by: Christoph Hellwig <hch@lst.de>
> ---
>  fs/xfs/libxfs/xfs_bmap.c |   28 +++++++++++++++++-----------
>  1 file changed, 17 insertions(+), 11 deletions(-)
> 
> 
> diff --git a/fs/xfs/libxfs/xfs_bmap.c b/fs/xfs/libxfs/xfs_bmap.c
> index fda13cd7add0..825d170e1503 100644
> --- a/fs/xfs/libxfs/xfs_bmap.c
> +++ b/fs/xfs/libxfs/xfs_bmap.c
...
> @@ -4611,8 +4601,24 @@ xfs_bmapi_convert_delalloc(
>  	bma.offset = bma.got.br_startoff;
>  	bma.length = max_t(xfs_filblks_t, bma.got.br_blockcount, MAXEXTLEN);
>  	bma.minleft = xfs_bmapi_minleft(tp, ip, whichfork);
> +
> +	/*
> +	 * When we're converting the delalloc reservations backing dirty pages
> +	 * in the page cache, we must be careful about how we create the new
> +	 * extents:
> +	 *
> +	 * New CoW fork extents are created unwritten, turned into real extents
> +	 * when we're about to write the data to disk, and mapped into the data
> +	 * fork after the write finishes.  End of story.
> +	 *
> +	 * New data fork extents must be mapped in as unwritten and converted
> +	 * to real extents after the write succeeds to avoid exposing stale
> +	 * disk contents if we crash.
> +	 */
>  	if (whichfork == XFS_COW_FORK)
>  		bma.flags = XFS_BMAPI_COWFORK | XFS_BMAPI_PREALLOC;
> +	else
> +		bma.flags = XFS_BMAPI_PREALLOC;

The following seems a bit cleaner:

	bma.flags = XFS_BMAPI_PREALLOC;
	if (whichfork == XFS_COW_FORK)
		bma.flags |= XFS_BMAPI_COWFORK;

... but nit aside, LGTM:

Reviewed-by: Brian Foster <bfoster@redhat.com>

>  
>  	if (!xfs_iext_peek_prev_extent(ifp, &bma.icur, &bma.prev))
>  		bma.prev.br_startoff = NULLFILEOFF;
> 

[PATCH 2/3] xfs: don't fail unwritten extent conversion on writeback due to edquot

[Darrick J. Wong]

From: Darrick J. Wong <darrick.wong@oracle.com>

During writeback, it's possible for the quota block reservation in
xfs_iomap_write_unwritten to fail with EDQUOT because we hit the quota
limit.  This causes writeback errors for data that was already written
to disk, when it's not even guaranteed that the bmbt will expand to
exceed the quota limit.  Irritatingly, this condition is reported to
userspace as EIO by fsync, which is confusing.

We wrote the data, so allow the reservation.  That might put us slightly
above the hard limit, but it's better than losing data after a write.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 fs/xfs/xfs_iomap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)


diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index bb590a267a7f..ac970b13b1f8 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -563,7 +563,7 @@ xfs_iomap_write_unwritten(
 		xfs_trans_ijoin(tp, ip, 0);
 
 		error = xfs_trans_reserve_quota_nblks(tp, ip, resblks, 0,
-				XFS_QMOPT_RES_REGBLKS);
+				XFS_QMOPT_RES_REGBLKS | XFS_QMOPT_FORCE_RES);
 		if (error)
 			goto error_on_bmapi_transaction;
 

Re: [PATCH 2/3] xfs: don't fail unwritten extent conversion on writeback due to edquot

[Christoph Hellwig]

On Mon, May 18, 2020 at 05:49:17PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> During writeback, it's possible for the quota block reservation in
> xfs_iomap_write_unwritten to fail with EDQUOT because we hit the quota
> limit.  This causes writeback errors for data that was already written
> to disk, when it's not even guaranteed that the bmbt will expand to
> exceed the quota limit.  Irritatingly, this condition is reported to
> userspace as EIO by fsync, which is confusing.
> 
> We wrote the data, so allow the reservation.  That might put us slightly
> above the hard limit, but it's better than losing data after a write.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Looks good:

Reviewed-by: Christoph Hellwig <hch@lst.de>

Re: [PATCH 2/3] xfs: don't fail unwritten extent conversion on writeback due to edquot

[Brian Foster]

On Mon, May 18, 2020 at 05:49:17PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> During writeback, it's possible for the quota block reservation in
> xfs_iomap_write_unwritten to fail with EDQUOT because we hit the quota
> limit.  This causes writeback errors for data that was already written
> to disk, when it's not even guaranteed that the bmbt will expand to
> exceed the quota limit.  Irritatingly, this condition is reported to
> userspace as EIO by fsync, which is confusing.
> 
> We wrote the data, so allow the reservation.  That might put us slightly
> above the hard limit, but it's better than losing data after a write.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> ---

Reviewed-by: Brian Foster <bfoster@redhat.com>

>  fs/xfs/xfs_iomap.c |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> 
> diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
> index bb590a267a7f..ac970b13b1f8 100644
> --- a/fs/xfs/xfs_iomap.c
> +++ b/fs/xfs/xfs_iomap.c
> @@ -563,7 +563,7 @@ xfs_iomap_write_unwritten(
>  		xfs_trans_ijoin(tp, ip, 0);
>  
>  		error = xfs_trans_reserve_quota_nblks(tp, ip, resblks, 0,
> -				XFS_QMOPT_RES_REGBLKS);
> +				XFS_QMOPT_RES_REGBLKS | XFS_QMOPT_FORCE_RES);
>  		if (error)
>  			goto error_on_bmapi_transaction;
>  
> 

[PATCH 3/3] xfs: measure all contiguous previous extents for prealloc size

[Darrick J. Wong]

From: Darrick J. Wong <darrick.wong@oracle.com>

When we're estimating a new speculative preallocation length for an
extending write, we should walk backwards through the extent list to
determine the number of number of blocks that are physically and
logically contiguous with the write offset, and use that as an input to
the preallocation size computation.

This way, preallocation length is truly measured by the effectiveness of
the allocator in giving us contiguous allocations without being
influenced by the state of a given extent.  This fixes both the problem
where ZERO_RANGE within an EOF can reduce preallocation, and prevents
the unnecessary shrinkage of preallocation when delalloc extents are
turned into unwritten extents.

This was found as a regression in xfs/014 after changing delalloc writes
to create unwritten extents during writeback.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
---
 fs/xfs/xfs_iomap.c |   63 +++++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 52 insertions(+), 11 deletions(-)


diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index ac970b13b1f8..2dffd56a433c 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -351,6 +351,46 @@ xfs_quota_calc_throttle(
 	}
 }
 
+/*
+ * Determine if the previous extent's range of offsets is contiguous with
+ * @offset_fsb.  If so, set @prev_contig to the number of blocks that are
+ * physically contiguous with that previous extent and return true.  If there
+ * is no previous extent or there's a hole right before @offset_fsb, return
+ * false.
+ *
+ * Note that we don't care if the previous extents are written or not.
+ */
+static inline bool
+xfs_iomap_prev_contiguous(
+	struct xfs_ifork	*ifp,
+	struct xfs_iext_cursor	*cur,
+	xfs_fileoff_t		offset_fsb,
+	xfs_extlen_t		*prev_contig)
+{
+	struct xfs_iext_cursor	ncur = *cur;
+	struct xfs_bmbt_irec	got, old;
+
+	xfs_iext_prev(ifp, &ncur);
+	if (!xfs_iext_get_extent(ifp, &ncur, &old))
+		return false;
+	if (old.br_startoff + old.br_blockcount < offset_fsb)
+		return false;
+
+	*prev_contig = old.br_blockcount;
+
+	xfs_iext_prev(ifp, &ncur);
+	while (xfs_iext_get_extent(ifp, &ncur, &got) &&
+	       got.br_blockcount + got.br_startoff == old.br_startoff &&
+	       got.br_blockcount + got.br_startblock == old.br_startblock &&
+	       *prev_contig <= MAXEXTLEN) {
+		*prev_contig += got.br_blockcount;
+		old = got; /* struct copy */
+		xfs_iext_prev(ifp, &ncur);
+	}
+
+	return true;
+}
+
 /*
  * If we are doing a write at the end of the file and there are no allocations
  * past this one, then extend the allocation out to the file system's write
@@ -380,12 +420,12 @@ xfs_iomap_prealloc_size(
 	struct xfs_mount	*mp = ip->i_mount;
 	struct xfs_ifork	*ifp = XFS_IFORK_PTR(ip, whichfork);
 	xfs_fileoff_t		offset_fsb = XFS_B_TO_FSBT(mp, offset);
-	struct xfs_bmbt_irec	prev;
 	int			shift = 0;
 	int64_t			freesp;
 	xfs_fsblock_t		qblocks;
 	int			qshift = 0;
 	xfs_fsblock_t		alloc_blocks = 0;
+	xfs_extlen_t		plen = 0;
 
 	if (offset + count <= XFS_ISIZE(ip))
 		return 0;
@@ -400,9 +440,9 @@ xfs_iomap_prealloc_size(
 	 */
 	if ((mp->m_flags & XFS_MOUNT_ALLOCSIZE) ||
 	    XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_dalign) ||
-	    !xfs_iext_peek_prev_extent(ifp, icur, &prev) ||
-	    prev.br_startoff + prev.br_blockcount < offset_fsb)
+	    !xfs_iomap_prev_contiguous(ifp, icur, offset_fsb, &plen)) {
 		return mp->m_allocsize_blocks;
+	}
 
 	/*
 	 * Determine the initial size of the preallocation. We are beyond the
@@ -413,15 +453,16 @@ xfs_iomap_prealloc_size(
 	 * preallocation size.
 	 *
 	 * If the extent is a hole, then preallocation is essentially disabled.
-	 * Otherwise we take the size of the preceding data extent as the basis
-	 * for the preallocation size. If the size of the extent is greater than
-	 * half the maximum extent length, then use the current offset as the
-	 * basis. This ensures that for large files the preallocation size
-	 * always extends to MAXEXTLEN rather than falling short due to things
-	 * like stripe unit/width alignment of real extents.
+	 * Otherwise we take the size of the contiguous preceding data extents
+	 * as the basis for the preallocation size. If the size of the extent
+	 * is greater than half the maximum extent length, then use the current
+	 * offset as the basis. This ensures that for large files the
+	 * preallocation size always extends to MAXEXTLEN rather than falling
+	 * short due to things like stripe unit/width alignment of real
+	 * extents.
 	 */
-	if (prev.br_blockcount <= (MAXEXTLEN >> 1))
-		alloc_blocks = prev.br_blockcount << 1;
+	if (plen <= (MAXEXTLEN >> 1))
+		alloc_blocks = plen << 1;
 	else
 		alloc_blocks = XFS_B_TO_FSB(mp, offset);
 	if (!alloc_blocks)

Re: [PATCH 3/3] xfs: measure all contiguous previous extents for prealloc size

[Brian Foster]

On Mon, May 18, 2020 at 05:49:23PM -0700, Darrick J. Wong wrote:
> From: Darrick J. Wong <darrick.wong@oracle.com>
> 
> When we're estimating a new speculative preallocation length for an
> extending write, we should walk backwards through the extent list to
> determine the number of number of blocks that are physically and
> logically contiguous with the write offset, and use that as an input to
> the preallocation size computation.
> 
> This way, preallocation length is truly measured by the effectiveness of
> the allocator in giving us contiguous allocations without being
> influenced by the state of a given extent.  This fixes both the problem
> where ZERO_RANGE within an EOF can reduce preallocation, and prevents
> the unnecessary shrinkage of preallocation when delalloc extents are
> turned into unwritten extents.
> 
> This was found as a regression in xfs/014 after changing delalloc writes
> to create unwritten extents during writeback.
> 
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> ---
>  fs/xfs/xfs_iomap.c |   63 +++++++++++++++++++++++++++++++++++++++++++---------
>  1 file changed, 52 insertions(+), 11 deletions(-)
> 
> 
> diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
> index ac970b13b1f8..2dffd56a433c 100644
> --- a/fs/xfs/xfs_iomap.c
> +++ b/fs/xfs/xfs_iomap.c
> @@ -351,6 +351,46 @@ xfs_quota_calc_throttle(
>  	}
>  }
>  
> +/*
> + * Determine if the previous extent's range of offsets is contiguous with
> + * @offset_fsb.  If so, set @prev_contig to the number of blocks that are
> + * physically contiguous with that previous extent and return true.  If there
> + * is no previous extent or there's a hole right before @offset_fsb, return
> + * false.
> + *
> + * Note that we don't care if the previous extents are written or not.

Why? :) Might be helpful to elaborate on why we require this algorithm
now...

> + */
> +static inline bool
> +xfs_iomap_prev_contiguous(
> +	struct xfs_ifork	*ifp,
> +	struct xfs_iext_cursor	*cur,
> +	xfs_fileoff_t		offset_fsb,
> +	xfs_extlen_t		*prev_contig)
> +{
> +	struct xfs_iext_cursor	ncur = *cur;
> +	struct xfs_bmbt_irec	got, old;
> +
> +	xfs_iext_prev(ifp, &ncur);
> +	if (!xfs_iext_get_extent(ifp, &ncur, &old))
> +		return false;
> +	if (old.br_startoff + old.br_blockcount < offset_fsb)
> +		return false;
> +
> +	*prev_contig = old.br_blockcount;
> +
> +	xfs_iext_prev(ifp, &ncur);
> +	while (xfs_iext_get_extent(ifp, &ncur, &got) &&
> +	       got.br_blockcount + got.br_startoff == old.br_startoff &&
> +	       got.br_blockcount + got.br_startblock == old.br_startblock &&
> +	       *prev_contig <= MAXEXTLEN) {
> +		*prev_contig += got.br_blockcount;
> +		old = got; /* struct copy */
> +		xfs_iext_prev(ifp, &ncur);
> +	}
> +
> +	return true;
> +}
> +
>  /*
>   * If we are doing a write at the end of the file and there are no allocations
>   * past this one, then extend the allocation out to the file system's write
> @@ -380,12 +420,12 @@ xfs_iomap_prealloc_size(
>  	struct xfs_mount	*mp = ip->i_mount;
>  	struct xfs_ifork	*ifp = XFS_IFORK_PTR(ip, whichfork);
>  	xfs_fileoff_t		offset_fsb = XFS_B_TO_FSBT(mp, offset);
> -	struct xfs_bmbt_irec	prev;
>  	int			shift = 0;
>  	int64_t			freesp;
>  	xfs_fsblock_t		qblocks;
>  	int			qshift = 0;
>  	xfs_fsblock_t		alloc_blocks = 0;
> +	xfs_extlen_t		plen = 0;
>  
>  	if (offset + count <= XFS_ISIZE(ip))
>  		return 0;
> @@ -400,9 +440,9 @@ xfs_iomap_prealloc_size(
>  	 */
>  	if ((mp->m_flags & XFS_MOUNT_ALLOCSIZE) ||
>  	    XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_dalign) ||
> -	    !xfs_iext_peek_prev_extent(ifp, icur, &prev) ||
> -	    prev.br_startoff + prev.br_blockcount < offset_fsb)
> +	    !xfs_iomap_prev_contiguous(ifp, icur, offset_fsb, &plen)) {
>  		return mp->m_allocsize_blocks;
> +	}
>  
>  	/*
>  	 * Determine the initial size of the preallocation. We are beyond the
> @@ -413,15 +453,16 @@ xfs_iomap_prealloc_size(
>  	 * preallocation size.
>  	 *
>  	 * If the extent is a hole, then preallocation is essentially disabled.
> -	 * Otherwise we take the size of the preceding data extent as the basis
> -	 * for the preallocation size. If the size of the extent is greater than
> -	 * half the maximum extent length, then use the current offset as the
> -	 * basis. This ensures that for large files the preallocation size
> -	 * always extends to MAXEXTLEN rather than falling short due to things
> -	 * like stripe unit/width alignment of real extents.
> +	 * Otherwise we take the size of the contiguous preceding data extents
> +	 * as the basis for the preallocation size. If the size of the extent

I'd refer to it as the "size of the contiguous range" or some such since
we're now talking about aggregating many extents to form the prealloc
basis.

I am a little curious if there's any noticeable impact from having to
perform the worst case extent walk in this path. For example, suppose we
had a speculatively preallocated file where we started writing (i.e.
converting) every other unwritten block such that this path had to walk
an extent per block until hitting the 8g max (8g == 2097152 4k blocks).
I guess the hope is that either most of those blocks wouldn't have been
written back and converted by the time we'd trigger the next post-eof
prealloc or that it would just be a wash in the stream of staggered
writes falling into our max sized preallocations. Either way, I think
it's more important to maintain the existing heuristic so this seems
reasonable from that perspective.

This scenario also makes me wonder if we should consider continuing to
do write time file size extension zeroing in certain cases vs. leaving
around unwritten extents. For example, the current post-eof prealloc
behavior is that writes that jump over current EOF will zero (via
buffered writes) any allocated blocks (delalloc or physical) between
current EOF and the start of the write. That behavior doesn't change
with delalloc -> unwritten if the prealloc is still delalloc at the time
of the extending write, but we'd presumably skip those zeroing writes if
the prealloc had been converted to real+unwritten first. Hmm.. that does
seem a little random to me, particularly if somebody starts to see
unwritten extents sprinkled throughout a file that never explicitly saw
preallocation. Perhaps we should avoid converting post-eof blocks? OTOH,
unwritten probably makes sense for large jumps in EOF vs zeroing GBs of
blocks, so one could argue that we should convert such ranges (if still
delalloc) rather than zero them at all. Thoughts? We should probably
work this out one way or another before landing the delalloc ->
unwritten behavior..

Brian

> +	 * is greater than half the maximum extent length, then use the current
> +	 * offset as the basis. This ensures that for large files the
> +	 * preallocation size always extends to MAXEXTLEN rather than falling
> +	 * short due to things like stripe unit/width alignment of real
> +	 * extents.
>  	 */
> -	if (prev.br_blockcount <= (MAXEXTLEN >> 1))
> -		alloc_blocks = prev.br_blockcount << 1;
> +	if (plen <= (MAXEXTLEN >> 1))
> +		alloc_blocks = plen << 1;
>  	else
>  		alloc_blocks = XFS_B_TO_FSB(mp, offset);
>  	if (!alloc_blocks)
> 

Re: [PATCH 3/3] xfs: measure all contiguous previous extents for prealloc size

[Brian Foster]

On Tue, May 19, 2020 at 08:48:27AM -0400, Brian Foster wrote:
> On Mon, May 18, 2020 at 05:49:23PM -0700, Darrick J. Wong wrote:
> > From: Darrick J. Wong <darrick.wong@oracle.com>
> > 
> > When we're estimating a new speculative preallocation length for an
> > extending write, we should walk backwards through the extent list to
> > determine the number of number of blocks that are physically and
> > logically contiguous with the write offset, and use that as an input to
> > the preallocation size computation.
> > 
> > This way, preallocation length is truly measured by the effectiveness of
> > the allocator in giving us contiguous allocations without being
> > influenced by the state of a given extent.  This fixes both the problem
> > where ZERO_RANGE within an EOF can reduce preallocation, and prevents
> > the unnecessary shrinkage of preallocation when delalloc extents are
> > turned into unwritten extents.
> > 
> > This was found as a regression in xfs/014 after changing delalloc writes
> > to create unwritten extents during writeback.
> > 
> > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> > ---
> >  fs/xfs/xfs_iomap.c |   63 +++++++++++++++++++++++++++++++++++++++++++---------
> >  1 file changed, 52 insertions(+), 11 deletions(-)
> > 
> > 
> > diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
> > index ac970b13b1f8..2dffd56a433c 100644
> > --- a/fs/xfs/xfs_iomap.c
> > +++ b/fs/xfs/xfs_iomap.c
...
> > @@ -413,15 +453,16 @@ xfs_iomap_prealloc_size(
> >  	 * preallocation size.
> >  	 *
> >  	 * If the extent is a hole, then preallocation is essentially disabled.
> > -	 * Otherwise we take the size of the preceding data extent as the basis
> > -	 * for the preallocation size. If the size of the extent is greater than
> > -	 * half the maximum extent length, then use the current offset as the
> > -	 * basis. This ensures that for large files the preallocation size
> > -	 * always extends to MAXEXTLEN rather than falling short due to things
> > -	 * like stripe unit/width alignment of real extents.
> > +	 * Otherwise we take the size of the contiguous preceding data extents
> > +	 * as the basis for the preallocation size. If the size of the extent
> 
> I'd refer to it as the "size of the contiguous range" or some such since
> we're now talking about aggregating many extents to form the prealloc
> basis.
> 
> I am a little curious if there's any noticeable impact from having to
> perform the worst case extent walk in this path. For example, suppose we
> had a speculatively preallocated file where we started writing (i.e.
> converting) every other unwritten block such that this path had to walk
> an extent per block until hitting the 8g max (8g == 2097152 4k blocks).
> I guess the hope is that either most of those blocks wouldn't have been
> written back and converted by the time we'd trigger the next post-eof
> prealloc or that it would just be a wash in the stream of staggered
> writes falling into our max sized preallocations. Either way, I think
> it's more important to maintain the existing heuristic so this seems
> reasonable from that perspective.
> 

I had a system spinning yesterday to create this worst case condition
across a couple max sized extents. Testing out the preallocation path, I
see a hit from ~5ms to ~35ms between the baseline variant and the
updated calculation algorithm. Note that the baseline here is only doing
a 16 block prealloc vs. 8gb with the fix, but regardless a 30ms
difference for an 8gb allocation doesn't really seem noticeable enough
to matter. IOW, I think we can disgregard this particular concern...

> This scenario also makes me wonder if we should consider continuing to
> do write time file size extension zeroing in certain cases vs. leaving
> around unwritten extents. For example, the current post-eof prealloc
> behavior is that writes that jump over current EOF will zero (via
> buffered writes) any allocated blocks (delalloc or physical) between
> current EOF and the start of the write. That behavior doesn't change
> with delalloc -> unwritten if the prealloc is still delalloc at the time
> of the extending write, but we'd presumably skip those zeroing writes if
> the prealloc had been converted to real+unwritten first. Hmm.. that does
> seem a little random to me, particularly if somebody starts to see
> unwritten extents sprinkled throughout a file that never explicitly saw
> preallocation. Perhaps we should avoid converting post-eof blocks? OTOH,
> unwritten probably makes sense for large jumps in EOF vs zeroing GBs of
> blocks, so one could argue that we should convert such ranges (if still
> delalloc) rather than zero them at all. Thoughts? We should probably
> work this out one way or another before landing the delalloc ->
> unwritten behavior..
> 

Thinking about this one a little more.. it seems it's probably not worth
conditionally changing post-eof conversion behavior. Since there are
cases where we probably want post-eof prealloc to remain as unwritten if
it's carried within i_size, that would either be extra code for post-eof
blocks or would split up any kind of heuristic for manually zeroing such
blocks. ISTM that the right approach might be to convert all delalloc ->
unwritten (as this series already does), then perhaps consider a write
time heuristic that would perform manual zeroing of extents if certain
conditions are met (e.g., for unwritten extents under a certain size).

The remaining question to me is whether we should include something like
that before changing delalloc behavior or consider it separately as an
optimization...

Brian

P.S., BTW I forgot to mention on my last pass of this series that it
probably makes sense to reorder these behavioral fixup patches to
precede the patch that actually changes delalloc to allocate unwritten
extents.

> Brian
> 
> > +	 * is greater than half the maximum extent length, then use the current
> > +	 * offset as the basis. This ensures that for large files the
> > +	 * preallocation size always extends to MAXEXTLEN rather than falling
> > +	 * short due to things like stripe unit/width alignment of real
> > +	 * extents.
> >  	 */
> > -	if (prev.br_blockcount <= (MAXEXTLEN >> 1))
> > -		alloc_blocks = prev.br_blockcount << 1;
> > +	if (plen <= (MAXEXTLEN >> 1))
> > +		alloc_blocks = plen << 1;
> >  	else
> >  		alloc_blocks = XFS_B_TO_FSB(mp, offset);
> >  	if (!alloc_blocks)
> > 
> 

Re: [PATCH 3/3] xfs: measure all contiguous previous extents for prealloc size

[Darrick J. Wong]

On Wed, May 20, 2020 at 09:23:34AM -0400, Brian Foster wrote:
> On Tue, May 19, 2020 at 08:48:27AM -0400, Brian Foster wrote:
> > On Mon, May 18, 2020 at 05:49:23PM -0700, Darrick J. Wong wrote:
> > > From: Darrick J. Wong <darrick.wong@oracle.com>
> > > 
> > > When we're estimating a new speculative preallocation length for an
> > > extending write, we should walk backwards through the extent list to
> > > determine the number of number of blocks that are physically and
> > > logically contiguous with the write offset, and use that as an input to
> > > the preallocation size computation.
> > > 
> > > This way, preallocation length is truly measured by the effectiveness of
> > > the allocator in giving us contiguous allocations without being
> > > influenced by the state of a given extent.  This fixes both the problem
> > > where ZERO_RANGE within an EOF can reduce preallocation, and prevents
> > > the unnecessary shrinkage of preallocation when delalloc extents are
> > > turned into unwritten extents.
> > > 
> > > This was found as a regression in xfs/014 after changing delalloc writes
> > > to create unwritten extents during writeback.
> > > 
> > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> > > ---
> > >  fs/xfs/xfs_iomap.c |   63 +++++++++++++++++++++++++++++++++++++++++++---------
> > >  1 file changed, 52 insertions(+), 11 deletions(-)
> > > 
> > > 
> > > diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
> > > index ac970b13b1f8..2dffd56a433c 100644
> > > --- a/fs/xfs/xfs_iomap.c
> > > +++ b/fs/xfs/xfs_iomap.c
> ...
> > > @@ -413,15 +453,16 @@ xfs_iomap_prealloc_size(
> > >  	 * preallocation size.
> > >  	 *
> > >  	 * If the extent is a hole, then preallocation is essentially disabled.
> > > -	 * Otherwise we take the size of the preceding data extent as the basis
> > > -	 * for the preallocation size. If the size of the extent is greater than
> > > -	 * half the maximum extent length, then use the current offset as the
> > > -	 * basis. This ensures that for large files the preallocation size
> > > -	 * always extends to MAXEXTLEN rather than falling short due to things
> > > -	 * like stripe unit/width alignment of real extents.
> > > +	 * Otherwise we take the size of the contiguous preceding data extents
> > > +	 * as the basis for the preallocation size. If the size of the extent
> > 
> > I'd refer to it as the "size of the contiguous range" or some such since
> > we're now talking about aggregating many extents to form the prealloc
> > basis.
> > 
> > I am a little curious if there's any noticeable impact from having to
> > perform the worst case extent walk in this path. For example, suppose we
> > had a speculatively preallocated file where we started writing (i.e.
> > converting) every other unwritten block such that this path had to walk
> > an extent per block until hitting the 8g max (8g == 2097152 4k blocks).
> > I guess the hope is that either most of those blocks wouldn't have been
> > written back and converted by the time we'd trigger the next post-eof
> > prealloc or that it would just be a wash in the stream of staggered
> > writes falling into our max sized preallocations. Either way, I think
> > it's more important to maintain the existing heuristic so this seems
> > reasonable from that perspective.
> > 
> 
> I had a system spinning yesterday to create this worst case condition
> across a couple max sized extents. Testing out the preallocation path, I
> see a hit from ~5ms to ~35ms between the baseline variant and the
> updated calculation algorithm. Note that the baseline here is only doing
> a 16 block prealloc vs. 8gb with the fix, but regardless a 30ms
> difference for an 8gb allocation doesn't really seem noticeable enough
> to matter. IOW, I think we can disgregard this particular concern...

<nod> I'd figured that walking backwards through the incore extent tree
shouldn't be all that costly, particularly since it tends to result in
more aggressive speculative preallocation.

> > This scenario also makes me wonder if we should consider continuing to
> > do write time file size extension zeroing in certain cases vs. leaving
> > around unwritten extents. For example, the current post-eof prealloc
> > behavior is that writes that jump over current EOF will zero (via
> > buffered writes) any allocated blocks (delalloc or physical) between
> > current EOF and the start of the write.

Right...

> > That behavior doesn't change with delalloc -> unwritten if the
> > prealloc is still delalloc at the time of the extending write, but
> > we'd presumably skip those zeroing writes if the prealloc had been
> > converted to real+unwritten first.

...though I wonder how often we'll encounter the situation where we've
created a posteof preallocation, and we end up with written extents
beyond EOF, and then the next write jumps past EOF?

> > Hmm.. that does
> > seem a little random to me, particularly if somebody starts to see
> > unwritten extents sprinkled throughout a file that never explicitly saw
> > preallocation. Perhaps we should avoid converting post-eof blocks? OTOH,
> > unwritten probably makes sense for large jumps in EOF vs zeroing GBs of
> > blocks, so one could argue that we should convert such ranges (if still
> > delalloc) rather than zero them at all. Thoughts? We should probably
> > work this out one way or another before landing the delalloc ->
> > unwritten behavior..

/me wonders if that will be a problem in practice?  If writeback starts,
it'll (try to) convert the delalloc reservation into an unwritten extent
(even if the extent crosses EOF).  Writeback completion will convert the
written parts to regular extents, leaving the rest unwritten.

iomap_zero_range is a NOP on unwritten extents, so starting a new write
far beyond EOF will do very little work to make sure [oldsize, write
start] range is zero.

(Or am I misunderstanding this...?)

> Thinking about this one a little more.. it seems it's probably not worth
> conditionally changing post-eof conversion behavior. Since there are
> cases where we probably want post-eof prealloc to remain as unwritten if
> it's carried within i_size, that would either be extra code for post-eof
> blocks or would split up any kind of heuristic for manually zeroing such
> blocks. ISTM that the right approach might be to convert all delalloc ->

I might just leave it all unwritten and not try to be clever about
pre-zeroing when we extend EOF because that just adds more complexity.

> unwritten (as this series already does), then perhaps consider a write
> time heuristic that would perform manual zeroing of extents if certain
> conditions are met (e.g., for unwritten extents under a certain size).

ISTR that ext4 has some sort of heuristic to do that.  I'm not sure
which is better as writes get relatively more expensive, but so long as
the amount of zeroing is less than an erase block size it probably
doesn't matter...

> The remaining question to me is whether we should include something like
> that before changing delalloc behavior or consider it separately as an
> optimization...

Separately.  It's getting late in the cycle. ;)

> Brian
> 
> P.S., BTW I forgot to mention on my last pass of this series that it
> probably makes sense to reorder these behavioral fixup patches to
> precede the patch that actually changes delalloc to allocate unwritten
> extents.

Yeah, I'll do that.  I think I mostly like Christoph's rewrite of the
third patch of the series.

--D

> > Brian
> > 
> > > +	 * is greater than half the maximum extent length, then use the current
> > > +	 * offset as the basis. This ensures that for large files the
> > > +	 * preallocation size always extends to MAXEXTLEN rather than falling
> > > +	 * short due to things like stripe unit/width alignment of real
> > > +	 * extents.
> > >  	 */
> > > -	if (prev.br_blockcount <= (MAXEXTLEN >> 1))
> > > -		alloc_blocks = prev.br_blockcount << 1;
> > > +	if (plen <= (MAXEXTLEN >> 1))
> > > +		alloc_blocks = plen << 1;
> > >  	else
> > >  		alloc_blocks = XFS_B_TO_FSB(mp, offset);
> > >  	if (!alloc_blocks)
> > > 
> > 
> 

Re: [PATCH 3/3] xfs: measure all contiguous previous extents for prealloc size

[Brian Foster]

On Wed, May 20, 2020 at 12:48:53PM -0700, Darrick J. Wong wrote:
> On Wed, May 20, 2020 at 09:23:34AM -0400, Brian Foster wrote:
> > On Tue, May 19, 2020 at 08:48:27AM -0400, Brian Foster wrote:
> > > On Mon, May 18, 2020 at 05:49:23PM -0700, Darrick J. Wong wrote:
> > > > From: Darrick J. Wong <darrick.wong@oracle.com>
> > > > 
> > > > When we're estimating a new speculative preallocation length for an
> > > > extending write, we should walk backwards through the extent list to
> > > > determine the number of number of blocks that are physically and
> > > > logically contiguous with the write offset, and use that as an input to
> > > > the preallocation size computation.
> > > > 
> > > > This way, preallocation length is truly measured by the effectiveness of
> > > > the allocator in giving us contiguous allocations without being
> > > > influenced by the state of a given extent.  This fixes both the problem
> > > > where ZERO_RANGE within an EOF can reduce preallocation, and prevents
> > > > the unnecessary shrinkage of preallocation when delalloc extents are
> > > > turned into unwritten extents.
> > > > 
> > > > This was found as a regression in xfs/014 after changing delalloc writes
> > > > to create unwritten extents during writeback.
> > > > 
> > > > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> > > > ---
> > > >  fs/xfs/xfs_iomap.c |   63 +++++++++++++++++++++++++++++++++++++++++++---------
> > > >  1 file changed, 52 insertions(+), 11 deletions(-)
> > > > 
> > > > 
> > > > diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
> > > > index ac970b13b1f8..2dffd56a433c 100644
> > > > --- a/fs/xfs/xfs_iomap.c
> > > > +++ b/fs/xfs/xfs_iomap.c
> > ...
> > > > @@ -413,15 +453,16 @@ xfs_iomap_prealloc_size(
> > > >  	 * preallocation size.
> > > >  	 *
> > > >  	 * If the extent is a hole, then preallocation is essentially disabled.
> > > > -	 * Otherwise we take the size of the preceding data extent as the basis
> > > > -	 * for the preallocation size. If the size of the extent is greater than
> > > > -	 * half the maximum extent length, then use the current offset as the
> > > > -	 * basis. This ensures that for large files the preallocation size
> > > > -	 * always extends to MAXEXTLEN rather than falling short due to things
> > > > -	 * like stripe unit/width alignment of real extents.
> > > > +	 * Otherwise we take the size of the contiguous preceding data extents
> > > > +	 * as the basis for the preallocation size. If the size of the extent
> > > 
> > > I'd refer to it as the "size of the contiguous range" or some such since
> > > we're now talking about aggregating many extents to form the prealloc
> > > basis.
> > > 
> > > I am a little curious if there's any noticeable impact from having to
> > > perform the worst case extent walk in this path. For example, suppose we
> > > had a speculatively preallocated file where we started writing (i.e.
> > > converting) every other unwritten block such that this path had to walk
> > > an extent per block until hitting the 8g max (8g == 2097152 4k blocks).
> > > I guess the hope is that either most of those blocks wouldn't have been
> > > written back and converted by the time we'd trigger the next post-eof
> > > prealloc or that it would just be a wash in the stream of staggered
> > > writes falling into our max sized preallocations. Either way, I think
> > > it's more important to maintain the existing heuristic so this seems
> > > reasonable from that perspective.
> > > 
> > 
> > I had a system spinning yesterday to create this worst case condition
> > across a couple max sized extents. Testing out the preallocation path, I
> > see a hit from ~5ms to ~35ms between the baseline variant and the
> > updated calculation algorithm. Note that the baseline here is only doing
> > a 16 block prealloc vs. 8gb with the fix, but regardless a 30ms
> > difference for an 8gb allocation doesn't really seem noticeable enough
> > to matter. IOW, I think we can disgregard this particular concern...
> 
> <nod> I'd figured that walking backwards through the incore extent tree
> shouldn't be all that costly, particularly since it tends to result in
> more aggressive speculative preallocation.
> 

Yeah, I was more curious about going from oneshot "check the prev
extent" logic to "walk N extents" logic with a significantly higher
upper bound and wanted to make sure we've analyzed worst case behavior.

> > > This scenario also makes me wonder if we should consider continuing to
> > > do write time file size extension zeroing in certain cases vs. leaving
> > > around unwritten extents. For example, the current post-eof prealloc
> > > behavior is that writes that jump over current EOF will zero (via
> > > buffered writes) any allocated blocks (delalloc or physical) between
> > > current EOF and the start of the write.
> 
> Right...
> 
> > > That behavior doesn't change with delalloc -> unwritten if the
> > > prealloc is still delalloc at the time of the extending write, but
> > > we'd presumably skip those zeroing writes if the prealloc had been
> > > converted to real+unwritten first.
> 
> ...though I wonder how often we'll encounter the situation where we've
> created a posteof preallocation, and we end up with written extents
> beyond EOF, and then the next write jumps past EOF?
> 

I don't think it's all that uncommon. The first contributing factor is
preallocation size. If a write workload is sparsely appending to a file
and sees one good speculative preallocation condition, further extending
writes are more likely to fall into the preallocation and essentially
compound the behavior for subsequent preallocations. The second
contributing factor is writeback converting the delalloc extent. I guess
we have less control over that between writeback heuristics, workload
(fsync?), memory availability, etc., but suffice it to say that the
larger the file and EOF extent grows, the more likely writeback converts
the extent to real (now unwritten) blocks.

> > > Hmm.. that does
> > > seem a little random to me, particularly if somebody starts to see
> > > unwritten extents sprinkled throughout a file that never explicitly saw
> > > preallocation. Perhaps we should avoid converting post-eof blocks? OTOH,
> > > unwritten probably makes sense for large jumps in EOF vs zeroing GBs of
> > > blocks, so one could argue that we should convert such ranges (if still
> > > delalloc) rather than zero them at all. Thoughts? We should probably
> > > work this out one way or another before landing the delalloc ->
> > > unwritten behavior..
> 
> /me wonders if that will be a problem in practice?  If writeback starts,
> it'll (try to) convert the delalloc reservation into an unwritten extent
> (even if the extent crosses EOF).  Writeback completion will convert the
> written parts to regular extents, leaving the rest unwritten.
> 
> iomap_zero_range is a NOP on unwritten extents, so starting a new write
> far beyond EOF will do very little work to make sure [oldsize, write
> start] range is zero.
> 
> (Or am I misunderstanding this...?)
> 

Nope, that's what happens. It's not a correctness issue. I'm just
calling out the subtle behavior change in that we can potentially leave
unwritten post-eof ranges sprinkled around as unwritten extents and
asking whether we think that might cause any notable issues for users.

We used to have a steady trickle of questions along the lines of "why
does my file/fs use so much space?" that boiled down to speculative
preallocation. The solution was usually more user education (i.e., FAQ
updates) and I think users have kind of become used to it by now, but
the broader point is that some users might notice such things and wonder
why some workload that previously created large files with fewer large
extents now creates files with hundreds (or more) extents purely due to
extent state of unwritten ranges.

I'm not totally convinced it matters. It could very well be just another
case of more education, but I wanted to at least make sure we discussed
it. ;) What particularly annoys me about this is that the resulting
behavior is so inconsistent. Some workloads that might involve fsync or
otherwise more frequent writeback events could see more unwritten
extents whereas others with very similar write patterns might see none
at all. Conversely, some users might continue to see huge post-eof
zeroing writes while others won't depending on whether a post-eof write
beats out writeback of the associated of extent.

> > Thinking about this one a little more.. it seems it's probably not worth
> > conditionally changing post-eof conversion behavior. Since there are
> > cases where we probably want post-eof prealloc to remain as unwritten if
> > it's carried within i_size, that would either be extra code for post-eof
> > blocks or would split up any kind of heuristic for manually zeroing such
> > blocks. ISTM that the right approach might be to convert all delalloc ->
> 
> I might just leave it all unwritten and not try to be clever about
> pre-zeroing when we extend EOF because that just adds more complexity.
> 

Well we do already have the post-eof zeroing logic, but indeed it would
be more complexity to conditionalize it on something other than extent
state. I guess we'd need to pass a size hint or something to iomap or
otherwise modify our callback path to detect this situation. There's
also the question of whether to overwrite explicit (fallocate) post-eof
preallocation or not...

> > unwritten (as this series already does), then perhaps consider a write
> > time heuristic that would perform manual zeroing of extents if certain
> > conditions are met (e.g., for unwritten extents under a certain size).
> 
> ISTR that ext4 has some sort of heuristic to do that.  I'm not sure
> which is better as writes get relatively more expensive, but so long as
> the amount of zeroing is less than an erase block size it probably
> doesn't matter...
> 

Yeah, though note again that historical behavior is to perform buffered
writes to zero the range regardless of its size or delalloc vs. real
allocation state (explicit preallocation notwithstanding). We could use
a cutoff size of tens of MBs or more and still be pretty conservative
from a behavioral change standpoint.

> > The remaining question to me is whether we should include something like
> > that before changing delalloc behavior or consider it separately as an
> > optimization...
> 
> Separately.  It's getting late in the cycle. ;)
> 

To clarify, my question is whether we should require manual zeroing
logic for some cases before changing delalloc allocation behavior or if
we're Ok with whatever the "worst case" behavior is (and thus consider
such manual zeroing a fragmentation mitigation optimization that can
come later). I think this is independent of wherever the current release
cycle is at because it's more a question of getting it right vs. getting
it done. :)

Brian

> > Brian
> > 
> > P.S., BTW I forgot to mention on my last pass of this series that it
> > probably makes sense to reorder these behavioral fixup patches to
> > precede the patch that actually changes delalloc to allocate unwritten
> > extents.
> 
> Yeah, I'll do that.  I think I mostly like Christoph's rewrite of the
> third patch of the series.
> 
> --D
> 
> > > Brian
> > > 
> > > > +	 * is greater than half the maximum extent length, then use the current
> > > > +	 * offset as the basis. This ensures that for large files the
> > > > +	 * preallocation size always extends to MAXEXTLEN rather than falling
> > > > +	 * short due to things like stripe unit/width alignment of real
> > > > +	 * extents.
> > > >  	 */
> > > > -	if (prev.br_blockcount <= (MAXEXTLEN >> 1))
> > > > -		alloc_blocks = prev.br_blockcount << 1;
> > > > +	if (plen <= (MAXEXTLEN >> 1))
> > > > +		alloc_blocks = plen << 1;
> > > >  	else
> > > >  		alloc_blocks = XFS_B_TO_FSB(mp, offset);
> > > >  	if (!alloc_blocks)
> > > > 
> > > 
> > 
> 

Re: [PATCH 3/3] xfs: measure all contiguous previous extents for prealloc size

[Christoph Hellwig]

The actual logic looks good, but I think the new helper and another
third set of comment explaining what is going on makes this area even
more confusing.  What about something like this instead?

diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
index bb590a267a7f9..26f9874361cd3 100644
--- a/fs/xfs/xfs_iomap.c
+++ b/fs/xfs/xfs_iomap.c
@@ -352,22 +352,10 @@ xfs_quota_calc_throttle(
 }
 
 /*
- * If we are doing a write at the end of the file and there are no allocations
- * past this one, then extend the allocation out to the file system's write
- * iosize.
- *
  * If we don't have a user specified preallocation size, dynamically increase
  * the preallocation size as the size of the file grows.  Cap the maximum size
  * at a single extent or less if the filesystem is near full. The closer the
- * filesystem is to full, the smaller the maximum prealocation.
- *
- * As an exception we don't do any preallocation at all if the file is smaller
- * than the minimum preallocation and we are using the default dynamic
- * preallocation scheme, as it is likely this is the only write to the file that
- * is going to be done.
- *
- * We clean up any extra space left over when the file is closed in
- * xfs_inactive().
+ * filesystem is to full, the smaller the maximum preallocation.
  */
 STATIC xfs_fsblock_t
 xfs_iomap_prealloc_size(
@@ -380,52 +368,58 @@ xfs_iomap_prealloc_size(
 	struct xfs_mount	*mp = ip->i_mount;
 	struct xfs_ifork	*ifp = XFS_IFORK_PTR(ip, whichfork);
 	xfs_fileoff_t		offset_fsb = XFS_B_TO_FSBT(mp, offset);
-	struct xfs_bmbt_irec	prev;
+	struct xfs_iext_cursor	ncur = *icur;
+	struct xfs_bmbt_irec	prev, got;
 	int			shift = 0;
 	int64_t			freesp;
 	xfs_fsblock_t		qblocks;
 	int			qshift = 0;
-	xfs_fsblock_t		alloc_blocks = 0;
+	xfs_fsblock_t		alloc_blocks;
+	xfs_extlen_t		plen;
 
-	if (offset + count <= XFS_ISIZE(ip))
-		return 0;
-
-	if (!(mp->m_flags & XFS_MOUNT_ALLOCSIZE) &&
-	    (XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_allocsize_blocks)))
+	/*
+	 * As an exception we don't do any preallocation at all if the file is
+	 * smaller than the minimum preallocation and we are using the default
+	 * dynamic preallocation scheme, as it is likely this is the only write
+	 * to the file that is going to be done.
+	 */
+	if (XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_allocsize_blocks))
 		return 0;
 
 	/*
-	 * If an explicit allocsize is set, the file is small, or we
-	 * are writing behind a hole, then use the minimum prealloc:
+	 * Otherwise use the minimum prealloca size for small files, or if we
+	 * are writing right after a hole.
 	 */
-	if ((mp->m_flags & XFS_MOUNT_ALLOCSIZE) ||
-	    XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_dalign) ||
-	    !xfs_iext_peek_prev_extent(ifp, icur, &prev) ||
+	if (XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_dalign) ||
+	    !xfs_iext_prev_extent(ifp, &ncur, &prev) ||
 	    prev.br_startoff + prev.br_blockcount < offset_fsb)
 		return mp->m_allocsize_blocks;
 
 	/*
-	 * Determine the initial size of the preallocation. We are beyond the
-	 * current EOF here, but we need to take into account whether this is
-	 * a sparse write or an extending write when determining the
-	 * preallocation size.  Hence we need to look up the extent that ends
-	 * at the current write offset and use the result to determine the
-	 * preallocation size.
-	 *
-	 * If the extent is a hole, then preallocation is essentially disabled.
-	 * Otherwise we take the size of the preceding data extent as the basis
-	 * for the preallocation size. If the size of the extent is greater than
-	 * half the maximum extent length, then use the current offset as the
-	 * basis. This ensures that for large files the preallocation size
-	 * always extends to MAXEXTLEN rather than falling short due to things
-	 * like stripe unit/width alignment of real extents.
+	 * Take the size of the contiguous preceding data extents as the basis
+	 * for the preallocation size.  Note that we don't care if the previous
+	 * extents are written or not.
 	 */
-	if (prev.br_blockcount <= (MAXEXTLEN >> 1))
-		alloc_blocks = prev.br_blockcount << 1;
-	else
+	plen = prev.br_blockcount;
+	while (xfs_iext_prev_extent(ifp, &ncur, &got)) {
+		if (plen > MAXEXTLEN / 2 ||
+		    got.br_startoff + got.br_blockcount != prev.br_startoff ||
+		    got.br_startblock + got.br_blockcount != prev.br_startblock)
+			break;
+		plen += got.br_blockcount;
+		prev = got;
+	}
+
+	/*
+	 * If the size of the extents is greater than half the maximum extent
+	 * length, then use the current offset as the basis.  This ensures that
+	 * for large files the preallocation size always extends to MAXEXTLEN
+	 * rather than falling short due to things like stripe unit/width
+	 * alignment of real extents.
+	 */
+	alloc_blocks = plen * 2;
+	if (alloc_blocks > MAXEXTLEN)
 		alloc_blocks = XFS_B_TO_FSB(mp, offset);
-	if (!alloc_blocks)
-		goto check_writeio;
 	qblocks = alloc_blocks;
 
 	/*
@@ -494,7 +488,6 @@ xfs_iomap_prealloc_size(
 	 */
 	while (alloc_blocks && alloc_blocks >= freesp)
 		alloc_blocks >>= 4;
-check_writeio:
 	if (alloc_blocks < mp->m_allocsize_blocks)
 		alloc_blocks = mp->m_allocsize_blocks;
 	trace_xfs_iomap_prealloc_size(ip, alloc_blocks, shift,
@@ -961,9 +954,16 @@ xfs_buffered_write_iomap_begin(
 	if (error)
 		goto out_unlock;
 
-	if (eof) {
-		prealloc_blocks = xfs_iomap_prealloc_size(ip, allocfork, offset,
-				count, &icur);
+	if (eof && offset + count > XFS_ISIZE(ip)) {
+		/*
+		 * Determine the initial size of the preallocation.
+ 		 * We clean up any extra preallocation when the file is closed.
+		 */
+		if (mp->m_flags & XFS_MOUNT_ALLOCSIZE)
+			prealloc_blocks = mp->m_allocsize_blocks;
+		else
+			prealloc_blocks = xfs_iomap_prealloc_size(ip, allocfork,
+						offset, count, &icur);
 		if (prealloc_blocks) {
 			xfs_extlen_t	align;
 			xfs_off_t	end_offset;

Re: [PATCH 3/3] xfs: measure all contiguous previous extents for prealloc size

[Darrick J. Wong]

On Tue, May 19, 2020 at 05:54:37AM -0700, Christoph Hellwig wrote:
> The actual logic looks good, but I think the new helper and another
> third set of comment explaining what is going on makes this area even
> more confusing.  What about something like this instead?

This seems reasonable, but the callsite cleanups ought to be a separate
patch from the behavior change.

> diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c
> index bb590a267a7f9..26f9874361cd3 100644
> --- a/fs/xfs/xfs_iomap.c
> +++ b/fs/xfs/xfs_iomap.c
> @@ -352,22 +352,10 @@ xfs_quota_calc_throttle(
>  }
>  
>  /*
> - * If we are doing a write at the end of the file and there are no allocations
> - * past this one, then extend the allocation out to the file system's write
> - * iosize.
> - *
>   * If we don't have a user specified preallocation size, dynamically increase
>   * the preallocation size as the size of the file grows.  Cap the maximum size
>   * at a single extent or less if the filesystem is near full. The closer the
> - * filesystem is to full, the smaller the maximum prealocation.
> - *
> - * As an exception we don't do any preallocation at all if the file is smaller
> - * than the minimum preallocation and we are using the default dynamic
> - * preallocation scheme, as it is likely this is the only write to the file that
> - * is going to be done.
> - *
> - * We clean up any extra space left over when the file is closed in
> - * xfs_inactive().
> + * filesystem is to full, the smaller the maximum preallocation.
>   */
>  STATIC xfs_fsblock_t
>  xfs_iomap_prealloc_size(
> @@ -380,52 +368,58 @@ xfs_iomap_prealloc_size(
>  	struct xfs_mount	*mp = ip->i_mount;
>  	struct xfs_ifork	*ifp = XFS_IFORK_PTR(ip, whichfork);
>  	xfs_fileoff_t		offset_fsb = XFS_B_TO_FSBT(mp, offset);
> -	struct xfs_bmbt_irec	prev;
> +	struct xfs_iext_cursor	ncur = *icur;
> +	struct xfs_bmbt_irec	prev, got;
>  	int			shift = 0;
>  	int64_t			freesp;
>  	xfs_fsblock_t		qblocks;
>  	int			qshift = 0;
> -	xfs_fsblock_t		alloc_blocks = 0;
> +	xfs_fsblock_t		alloc_blocks;
> +	xfs_extlen_t		plen;
>  
> -	if (offset + count <= XFS_ISIZE(ip))
> -		return 0;
> -
> -	if (!(mp->m_flags & XFS_MOUNT_ALLOCSIZE) &&
> -	    (XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_allocsize_blocks)))
> +	/*
> +	 * As an exception we don't do any preallocation at all if the file is
> +	 * smaller than the minimum preallocation and we are using the default
> +	 * dynamic preallocation scheme, as it is likely this is the only write
> +	 * to the file that is going to be done.
> +	 */
> +	if (XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_allocsize_blocks))
>  		return 0;
>  
>  	/*
> -	 * If an explicit allocsize is set, the file is small, or we
> -	 * are writing behind a hole, then use the minimum prealloc:
> +	 * Otherwise use the minimum prealloca size for small files, or if we

"preallocation"?

> +	 * are writing right after a hole.
>  	 */
> -	if ((mp->m_flags & XFS_MOUNT_ALLOCSIZE) ||
> -	    XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_dalign) ||
> -	    !xfs_iext_peek_prev_extent(ifp, icur, &prev) ||
> +	if (XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_dalign) ||
> +	    !xfs_iext_prev_extent(ifp, &ncur, &prev) ||
>  	    prev.br_startoff + prev.br_blockcount < offset_fsb)
>  		return mp->m_allocsize_blocks;
>  
>  	/*
> -	 * Determine the initial size of the preallocation. We are beyond the
> -	 * current EOF here, but we need to take into account whether this is
> -	 * a sparse write or an extending write when determining the
> -	 * preallocation size.  Hence we need to look up the extent that ends
> -	 * at the current write offset and use the result to determine the
> -	 * preallocation size.
> -	 *
> -	 * If the extent is a hole, then preallocation is essentially disabled.
> -	 * Otherwise we take the size of the preceding data extent as the basis
> -	 * for the preallocation size. If the size of the extent is greater than
> -	 * half the maximum extent length, then use the current offset as the
> -	 * basis. This ensures that for large files the preallocation size
> -	 * always extends to MAXEXTLEN rather than falling short due to things
> -	 * like stripe unit/width alignment of real extents.
> +	 * Take the size of the contiguous preceding data extents as the basis
> +	 * for the preallocation size.  Note that we don't care if the previous
> +	 * extents are written or not.
>  	 */
> -	if (prev.br_blockcount <= (MAXEXTLEN >> 1))
> -		alloc_blocks = prev.br_blockcount << 1;
> -	else
> +	plen = prev.br_blockcount;
> +	while (xfs_iext_prev_extent(ifp, &ncur, &got)) {
> +		if (plen > MAXEXTLEN / 2 ||
> +		    got.br_startoff + got.br_blockcount != prev.br_startoff ||
> +		    got.br_startblock + got.br_blockcount != prev.br_startblock)
> +			break;
> +		plen += got.br_blockcount;
> +		prev = got;
> +	}
> +
> +	/*
> +	 * If the size of the extents is greater than half the maximum extent
> +	 * length, then use the current offset as the basis.  This ensures that
> +	 * for large files the preallocation size always extends to MAXEXTLEN
> +	 * rather than falling short due to things like stripe unit/width
> +	 * alignment of real extents.
> +	 */
> +	alloc_blocks = plen * 2;
> +	if (alloc_blocks > MAXEXTLEN)
>  		alloc_blocks = XFS_B_TO_FSB(mp, offset);
> -	if (!alloc_blocks)
> -		goto check_writeio;
>  	qblocks = alloc_blocks;
>  
>  	/*
> @@ -494,7 +488,6 @@ xfs_iomap_prealloc_size(
>  	 */
>  	while (alloc_blocks && alloc_blocks >= freesp)
>  		alloc_blocks >>= 4;
> -check_writeio:
>  	if (alloc_blocks < mp->m_allocsize_blocks)
>  		alloc_blocks = mp->m_allocsize_blocks;
>  	trace_xfs_iomap_prealloc_size(ip, alloc_blocks, shift,
> @@ -961,9 +954,16 @@ xfs_buffered_write_iomap_begin(
>  	if (error)
>  		goto out_unlock;
>  
> -	if (eof) {
> -		prealloc_blocks = xfs_iomap_prealloc_size(ip, allocfork, offset,
> -				count, &icur);
> +	if (eof && offset + count > XFS_ISIZE(ip)) {
> +		/*
> +		 * Determine the initial size of the preallocation.
> + 		 * We clean up any extra preallocation when the file is closed.
> +		 */
> +		if (mp->m_flags & XFS_MOUNT_ALLOCSIZE)
> +			prealloc_blocks = mp->m_allocsize_blocks;
> +		else
> +			prealloc_blocks = xfs_iomap_prealloc_size(ip, allocfork,
> +						offset, count, &icur);

I'm not sure how much we're really gaining from moving the
MOUNT_ALLOCSIZE check out to the caller, but I don't feel all that
passionate about this.

--D

>  		if (prealloc_blocks) {
>  			xfs_extlen_t	align;
>  			xfs_off_t	end_offset;

Re: [PATCH 3/3] xfs: measure all contiguous previous extents for prealloc size

[Christoph Hellwig]

On Wed, May 20, 2020 at 02:17:16PM -0700, Darrick J. Wong wrote:
> On Tue, May 19, 2020 at 05:54:37AM -0700, Christoph Hellwig wrote:
> > The actual logic looks good, but I think the new helper and another
> > third set of comment explaining what is going on makes this area even
> > more confusing.  What about something like this instead?
> 
> This seems reasonable, but the callsite cleanups ought to be a separate
> patch from the behavior change.

Do you want me to send prep patches, or do you want to split it our
yourself?

> > +	if (eof && offset + count > XFS_ISIZE(ip)) {
> > +		/*
> > +		 * Determine the initial size of the preallocation.
> > + 		 * We clean up any extra preallocation when the file is closed.
> > +		 */
> > +		if (mp->m_flags & XFS_MOUNT_ALLOCSIZE)
> > +			prealloc_blocks = mp->m_allocsize_blocks;
> > +		else
> > +			prealloc_blocks = xfs_iomap_prealloc_size(ip, allocfork,
> > +						offset, count, &icur);
> 
> I'm not sure how much we're really gaining from moving the
> MOUNT_ALLOCSIZE check out to the caller, but I don't feel all that
> passionate about this.

From the pure code stats point of view it doensn't matter.  But from the
software architecture POV it does - now xfs_iomap_prealloc_size contains
the dynamic prealloc size algorithm, while the hard coded case is
handled in the caller.

Re: [PATCH 3/3] xfs: measure all contiguous previous extents for prealloc size

[Darrick J. Wong]

On Thu, May 21, 2020 at 02:31:40AM -0700, Christoph Hellwig wrote:
> On Wed, May 20, 2020 at 02:17:16PM -0700, Darrick J. Wong wrote:
> > On Tue, May 19, 2020 at 05:54:37AM -0700, Christoph Hellwig wrote:
> > > The actual logic looks good, but I think the new helper and another
> > > third set of comment explaining what is going on makes this area even
> > > more confusing.  What about something like this instead?
> > 
> > This seems reasonable, but the callsite cleanups ought to be a separate
> > patch from the behavior change.
> 
> Do you want me to send prep patches, or do you want to split it our
> yourself?

I split them already, so I'll send v2 shortly.

> > > +	if (eof && offset + count > XFS_ISIZE(ip)) {
> > > +		/*
> > > +		 * Determine the initial size of the preallocation.
> > > + 		 * We clean up any extra preallocation when the file is closed.
> > > +		 */
> > > +		if (mp->m_flags & XFS_MOUNT_ALLOCSIZE)
> > > +			prealloc_blocks = mp->m_allocsize_blocks;
> > > +		else
> > > +			prealloc_blocks = xfs_iomap_prealloc_size(ip, allocfork,
> > > +						offset, count, &icur);
> > 
> > I'm not sure how much we're really gaining from moving the
> > MOUNT_ALLOCSIZE check out to the caller, but I don't feel all that
> > passionate about this.
> 
> From the pure code stats point of view it doensn't matter.  But from the
> software architecture POV it does - now xfs_iomap_prealloc_size contains
> the dynamic prealloc size algorithm, while the hard coded case is
> handled in the caller.

<nod>

--D