[PULL 15/29] hw/arm/fsl-imx31: Wire up watchdog

[Peter Maydell <peter.maydell@linaro.org>]

From: Guenter Roeck <linux@roeck-us.net>

With this patch, the watchdog on i.MX31 emulations is fully operational.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20200517162135.110364-5-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/fsl-imx31.h | 4 ++++
 hw/arm/fsl-imx31.c         | 6 ++++++
 hw/arm/Kconfig             | 1 +
 3 files changed, 11 insertions(+)

diff --git a/include/hw/arm/fsl-imx31.h b/include/hw/arm/fsl-imx31.h
index ac5ca9826a4..dd8561b3098 100644
--- a/include/hw/arm/fsl-imx31.h
+++ b/include/hw/arm/fsl-imx31.h
@@ -25,6 +25,7 @@
 #include "hw/timer/imx_epit.h"
 #include "hw/i2c/imx_i2c.h"
 #include "hw/gpio/imx_gpio.h"
+#include "hw/watchdog/wdt_imx2.h"
 #include "exec/memory.h"
 #include "target/arm/cpu.h"
 
@@ -49,6 +50,7 @@ typedef struct FslIMX31State {
     IMXEPITState   epit[FSL_IMX31_NUM_EPITS];
     IMXI2CState    i2c[FSL_IMX31_NUM_I2CS];
     IMXGPIOState   gpio[FSL_IMX31_NUM_GPIOS];
+    IMX2WdtState   wdt;
     MemoryRegion   secure_rom;
     MemoryRegion   rom;
     MemoryRegion   iram;
@@ -87,6 +89,8 @@ typedef struct FslIMX31State {
 #define FSL_IMX31_GPIO1_SIZE            0x4000
 #define FSL_IMX31_GPIO2_ADDR            0x53FD0000
 #define FSL_IMX31_GPIO2_SIZE            0x4000
+#define FSL_IMX31_WDT_ADDR              0x53FDC000
+#define FSL_IMX31_WDT_SIZE              0x4000
 #define FSL_IMX31_AVIC_ADDR             0x68000000
 #define FSL_IMX31_AVIC_SIZE             0x100
 #define FSL_IMX31_SDRAM0_ADDR           0x80000000
diff --git a/hw/arm/fsl-imx31.c b/hw/arm/fsl-imx31.c
index 8472d2e9111..1e7959863dd 100644
--- a/hw/arm/fsl-imx31.c
+++ b/hw/arm/fsl-imx31.c
@@ -63,6 +63,8 @@ static void fsl_imx31_init(Object *obj)
         sysbus_init_child_obj(obj, "gpio[*]", &s->gpio[i], sizeof(s->gpio[i]),
                               TYPE_IMX_GPIO);
     }
+
+    sysbus_init_child_obj(obj, "wdt", &s->wdt, sizeof(s->wdt), TYPE_IMX2_WDT);
 }
 
 static void fsl_imx31_realize(DeviceState *dev, Error **errp)
@@ -205,6 +207,10 @@ static void fsl_imx31_realize(DeviceState *dev, Error **errp)
                                             gpio_table[i].irq));
     }
 
+    /* Watchdog */
+    object_property_set_bool(OBJECT(&s->wdt), true, "realized", &error_abort);
+    sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt), 0, FSL_IMX31_WDT_ADDR);
+
     /* On a real system, the first 16k is a `secure boot rom' */
     memory_region_init_rom(&s->secure_rom, OBJECT(dev), "imx31.secure_rom",
                            FSL_IMX31_SECURE_ROM_SIZE, &err);
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index 8a5eb140f59..9afa6eee799 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -367,6 +367,7 @@ config FSL_IMX31
     select SERIAL
     select IMX
     select IMX_I2C
+    select WDT_IMX2
     select LAN9118
 
 config FSL_IMX6
-- 
2.20.1