* [PATCH v6 1/5] iotests: Fix test 178
2020-05-21 19:21 [PATCH v6 0/5] qemu-img: Add convert --bitmaps Eric Blake
@ 2020-05-21 19:21 ` Eric Blake
2020-05-21 19:21 ` [PATCH v6 2/5] qcow2: Expose bitmaps' size during measure Eric Blake
` (3 subsequent siblings)
4 siblings, 0 replies; 12+ messages in thread
From: Eric Blake @ 2020-05-21 19:21 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, nsoffer, vsementsov, qemu-block, mreitz
A recent change to qemu-img changed expected error message output, but
178 takes long enough to execute that it does not get run by 'make
check' or './check -g quick'.
Fixes: 43d589b074
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
tests/qemu-iotests/178.out.qcow2 | 2 +-
tests/qemu-iotests/178.out.raw | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/tests/qemu-iotests/178.out.qcow2 b/tests/qemu-iotests/178.out.qcow2
index f59bf4b2fbc4..4b69524c80ee 100644
--- a/tests/qemu-iotests/178.out.qcow2
+++ b/tests/qemu-iotests/178.out.qcow2
@@ -13,7 +13,7 @@ qemu-img: Invalid option list: ,
qemu-img: Invalid parameter 'snapshot.foo'
qemu-img: Failed in parsing snapshot param 'snapshot.foo'
qemu-img: --output must be used with human or json as argument.
-qemu-img: Image size must be less than 8 EiB!
+qemu-img: Invalid image size specified. Must be between 0 and 9223372036854775807.
qemu-img: Unknown file format 'foo'
== Size calculation for a new file (human) ==
diff --git a/tests/qemu-iotests/178.out.raw b/tests/qemu-iotests/178.out.raw
index 404ca908d8c2..20e17da115cb 100644
--- a/tests/qemu-iotests/178.out.raw
+++ b/tests/qemu-iotests/178.out.raw
@@ -13,7 +13,7 @@ qemu-img: Invalid option list: ,
qemu-img: Invalid parameter 'snapshot.foo'
qemu-img: Failed in parsing snapshot param 'snapshot.foo'
qemu-img: --output must be used with human or json as argument.
-qemu-img: Image size must be less than 8 EiB!
+qemu-img: Invalid image size specified. Must be between 0 and 9223372036854775807.
qemu-img: Unknown file format 'foo'
== Size calculation for a new file (human) ==
--
2.26.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v6 2/5] qcow2: Expose bitmaps' size during measure
2020-05-21 19:21 [PATCH v6 0/5] qemu-img: Add convert --bitmaps Eric Blake
2020-05-21 19:21 ` [PATCH v6 1/5] iotests: Fix test 178 Eric Blake
@ 2020-05-21 19:21 ` Eric Blake
2020-05-25 7:05 ` Vladimir Sementsov-Ogievskiy
2020-05-21 19:21 ` [PATCH v6 3/5] qemu-img: Factor out code for merging bitmaps Eric Blake
` (2 subsequent siblings)
4 siblings, 1 reply; 12+ messages in thread
From: Eric Blake @ 2020-05-21 19:21 UTC (permalink / raw)
To: qemu-devel
Cc: kwolf, vsementsov, qemu-block, Markus Armbruster, mreitz,
nsoffer, John Snow
It's useful to know how much space can be occupied by qcow2 persistent
bitmaps, even though such metadata is unrelated to the guest-visible
data. Report this value as an additional QMP field, present when
measuring an existing image and output format that both support
bitmaps. Update iotest 178 and 190 to updated output, as well as new
coverage in 190 demonstrating non-zero values made possible with the
recently-added qemu-img bitmap command (see 3b51ab4b).
The new 'bitmaps size:' field is displayed automatically as part of
'qemu-img measure' any time it is present in QMP (that is, any time
both the source image being measured and destination format support
bitmaps, even if the measurement is 0 because there are no bitmaps
present). If the field is absent, it means that no bitmaps can be
copied (source, destination, or both lack bitmaps, including when
measuring based on size rather than on a source image). This behavior
is compatible with an upcoming patch adding 'qemu-img convert
--bitmaps': that command will fail in the same situations where this
patch omits the field.
The addition of a new field demonstrates why we should always
zero-initialize qapi C structs; while the qcow2 driver still fully
populates all fields, the raw and crypto drivers had to be tweaked to
avoid uninitialized data.
See also: https://bugzilla.redhat.com/1779904
Reported-by: Nir Soffer <nsoffer@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
---
docs/tools/qemu-img.rst | 7 +++++
qapi/block-core.json | 16 ++++++++----
block/qcow2.h | 2 ++
block/crypto.c | 2 +-
block/qcow2-bitmap.c | 36 +++++++++++++++++++++++++
block/qcow2.c | 14 +++++++---
block/raw-format.c | 2 +-
qemu-img.c | 3 +++
tests/qemu-iotests/178.out.qcow2 | 16 ++++++++++++
tests/qemu-iotests/190 | 45 ++++++++++++++++++++++++++++++--
tests/qemu-iotests/190.out | 27 ++++++++++++++++++-
11 files changed, 157 insertions(+), 13 deletions(-)
diff --git a/docs/tools/qemu-img.rst b/docs/tools/qemu-img.rst
index 38d464ea3f23..320cb52b9f61 100644
--- a/docs/tools/qemu-img.rst
+++ b/docs/tools/qemu-img.rst
@@ -616,6 +616,7 @@ Command description:
required size: 524288
fully allocated size: 1074069504
+ bitmaps size: 0
The ``required size`` is the file size of the new image. It may be smaller
than the virtual disk size if the image format supports compact representation.
@@ -625,6 +626,12 @@ Command description:
occupy with the exception of internal snapshots, dirty bitmaps, vmstate data,
and other advanced image format features.
+ The ``bitmaps size`` is the additional size required in order to
+ copy bitmaps from a source image in addition to the guest-visible
+ data; the line is omitted if either source or destination lacks
+ bitmap support, or 0 if bitmaps are supported but there is nothing
+ to copy.
+
.. option:: snapshot [--object OBJECTDEF] [--image-opts] [-U] [-q] [-l | -a SNAPSHOT | -c SNAPSHOT | -d SNAPSHOT] FILENAME
List, apply, create or delete snapshots in image *FILENAME*.
diff --git a/qapi/block-core.json b/qapi/block-core.json
index 6fbacddab2cc..0e1c6a59f228 100644
--- a/qapi/block-core.json
+++ b/qapi/block-core.json
@@ -636,18 +636,24 @@
# efficiently so file size may be smaller than virtual disk size.
#
# The values are upper bounds that are guaranteed to fit the new image file.
-# Subsequent modification, such as internal snapshot or bitmap creation, may
-# require additional space and is not covered here.
+# Subsequent modification, such as internal snapshot or further bitmap
+# creation, may require additional space and is not covered here.
#
-# @required: Size required for a new image file, in bytes.
+# @required: Size required for a new image file, in bytes, when copying just
+# allocated guest-visible contents.
#
# @fully-allocated: Image file size, in bytes, once data has been written
-# to all sectors.
+# to all sectors, when copying just guest-visible contents.
+#
+# @bitmaps: Additional size required if all the top-level bitmap metadata
+# in the source image were to be copied to the destination,
+# present only when source and destination both support
+# persistent bitmaps. (since 5.1)
#
# Since: 2.10
##
{ 'struct': 'BlockMeasureInfo',
- 'data': {'required': 'int', 'fully-allocated': 'int'} }
+ 'data': {'required': 'int', 'fully-allocated': 'int', '*bitmaps': 'int'} }
##
# @query-block:
diff --git a/block/qcow2.h b/block/qcow2.h
index 402e8acb1cb7..7ce2c23bdb7a 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -783,6 +783,8 @@ int qcow2_co_remove_persistent_dirty_bitmap(BlockDriverState *bs,
const char *name,
Error **errp);
bool qcow2_supports_persistent_dirty_bitmap(BlockDriverState *bs);
+uint64_t qcow2_get_persistent_dirty_bitmap_size(BlockDriverState *bs,
+ uint32_t cluster_size);
ssize_t coroutine_fn
qcow2_co_compress(BlockDriverState *bs, void *dest, size_t dest_size,
diff --git a/block/crypto.c b/block/crypto.c
index b216e12c3154..973b57b3eb74 100644
--- a/block/crypto.c
+++ b/block/crypto.c
@@ -552,7 +552,7 @@ static BlockMeasureInfo *block_crypto_measure(QemuOpts *opts,
* Unallocated blocks are still encrypted so allocation status makes no
* difference to the file size.
*/
- info = g_new(BlockMeasureInfo, 1);
+ info = g_new0(BlockMeasureInfo, 1);
info->fully_allocated = luks_payload_size + size;
info->required = luks_payload_size + size;
return info;
diff --git a/block/qcow2-bitmap.c b/block/qcow2-bitmap.c
index 1cf6d2ab77a3..7bf12502da8c 100644
--- a/block/qcow2-bitmap.c
+++ b/block/qcow2-bitmap.c
@@ -1755,3 +1755,39 @@ bool qcow2_supports_persistent_dirty_bitmap(BlockDriverState *bs)
return s->qcow_version >= 3;
}
+
+/*
+ * Compute the space required for bitmaps in @bs.
+ *
+ * The computation is based as if copying to a new image with the
+ * given @cluster_size, which may differ from the cluster size in @bs.
+ */
+uint64_t qcow2_get_persistent_dirty_bitmap_size(BlockDriverState *bs,
+ uint32_t cluster_size)
+{
+ uint64_t bitmaps_size = 0;
+ BdrvDirtyBitmap *bm;
+ size_t bitmap_dir_size = 0;
+
+ FOR_EACH_DIRTY_BITMAP(bs, bm) {
+ if (bdrv_dirty_bitmap_get_persistence(bm)) {
+ const char *name = bdrv_dirty_bitmap_name(bm);
+ uint32_t granularity = bdrv_dirty_bitmap_granularity(bm);
+ uint64_t bmbytes =
+ get_bitmap_bytes_needed(bdrv_dirty_bitmap_size(bm),
+ granularity);
+ uint64_t bmclusters = DIV_ROUND_UP(bmbytes, cluster_size);
+
+ /* Assume the entire bitmap is allocated */
+ bitmaps_size += bmclusters * cluster_size;
+ /* Also reserve space for the bitmap table entries */
+ bitmaps_size += ROUND_UP(bmclusters * sizeof(uint64_t),
+ cluster_size);
+ /* And space for contribution to bitmap directory size */
+ bitmap_dir_size += calc_dir_entry_size(strlen(name), 0);
+ }
+ }
+ bitmaps_size += ROUND_UP(bitmap_dir_size, cluster_size);
+
+ return bitmaps_size;
+}
diff --git a/block/qcow2.c b/block/qcow2.c
index dfab8d2f6cd8..0cd2e6757e8c 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -4953,16 +4953,24 @@ static BlockMeasureInfo *qcow2_measure(QemuOpts *opts, BlockDriverState *in_bs,
required = virtual_size;
}
- info = g_new(BlockMeasureInfo, 1);
+ info = g_new0(BlockMeasureInfo, 1);
info->fully_allocated =
qcow2_calc_prealloc_size(virtual_size, cluster_size,
ctz32(refcount_bits)) + luks_payload_size;
- /* Remove data clusters that are not required. This overestimates the
+ /*
+ * Remove data clusters that are not required. This overestimates the
* required size because metadata needed for the fully allocated file is
- * still counted.
+ * still counted. Show bitmaps only if both source and destination
+ * would support them.
*/
info->required = info->fully_allocated - virtual_size + required;
+ info->has_bitmaps = version >= 3 && in_bs &&
+ bdrv_supports_persistent_dirty_bitmap(in_bs);
+ if (info->has_bitmaps) {
+ info->bitmaps = qcow2_get_persistent_dirty_bitmap_size(in_bs,
+ cluster_size);
+ }
return info;
err:
diff --git a/block/raw-format.c b/block/raw-format.c
index 018441bddf27..233d019ca338 100644
--- a/block/raw-format.c
+++ b/block/raw-format.c
@@ -359,7 +359,7 @@ static BlockMeasureInfo *raw_measure(QemuOpts *opts, BlockDriverState *in_bs,
BDRV_SECTOR_SIZE);
}
- info = g_new(BlockMeasureInfo, 1);
+ info = g_new0(BlockMeasureInfo, 1);
info->required = required;
/* Unallocated sectors count towards the file size in raw images */
diff --git a/qemu-img.c b/qemu-img.c
index 2d30682f129f..b2311bd3f6b4 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -5302,6 +5302,9 @@ static int img_measure(int argc, char **argv)
if (output_format == OFORMAT_HUMAN) {
printf("required size: %" PRIu64 "\n", info->required);
printf("fully allocated size: %" PRIu64 "\n", info->fully_allocated);
+ if (info->has_bitmaps) {
+ printf("bitmaps size: %" PRIu64 "\n", info->bitmaps);
+ }
} else {
dump_json_block_measure_info(info);
}
diff --git a/tests/qemu-iotests/178.out.qcow2 b/tests/qemu-iotests/178.out.qcow2
index 4b69524c80ee..c7997760fd6f 100644
--- a/tests/qemu-iotests/178.out.qcow2
+++ b/tests/qemu-iotests/178.out.qcow2
@@ -37,6 +37,7 @@ qemu-img: The image size is too large (try using a larger cluster size)
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=0
required size: 196608
fully allocated size: 196608
+bitmaps size: 0
converted image file size in bytes: 196608
@@ -45,6 +46,7 @@ converted image file size in bytes: 196608
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
required size: 393216
fully allocated size: 1074135040
+bitmaps size: 0
wrote 512/512 bytes at offset 512
512 bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
wrote 65536/65536 bytes at offset 65536
@@ -53,6 +55,7 @@ wrote 64512/64512 bytes at offset 134217728
63 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
required size: 589824
fully allocated size: 1074135040
+bitmaps size: 0
converted image file size in bytes: 524288
@@ -60,6 +63,7 @@ converted image file size in bytes: 524288
required size: 524288
fully allocated size: 1074135040
+bitmaps size: 0
converted image file size in bytes: 458752
@@ -67,16 +71,19 @@ converted image file size in bytes: 458752
required size: 1074135040
fully allocated size: 1074135040
+bitmaps size: 0
== qcow2 input image and LUKS encryption ==
required size: 2686976
fully allocated size: 1076232192
+bitmaps size: 0
== qcow2 input image and preallocation (human) ==
required size: 1074135040
fully allocated size: 1074135040
+bitmaps size: 0
converted image file size in bytes: 1074135040
@@ -87,6 +94,7 @@ wrote 8388608/8388608 bytes at offset 0
8 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
required size: 8716288
fully allocated size: 8716288
+bitmaps size: 0
converted image file size in bytes: 8716288
@@ -173,6 +181,7 @@ qemu-img: The image size is too large (try using a larger cluster size)
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=0
{
+ "bitmaps": 0,
"required": 196608,
"fully-allocated": 196608
}
@@ -183,6 +192,7 @@ converted image file size in bytes: 196608
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1073741824
{
+ "bitmaps": 0,
"required": 393216,
"fully-allocated": 1074135040
}
@@ -193,6 +203,7 @@ wrote 65536/65536 bytes at offset 65536
wrote 64512/64512 bytes at offset 134217728
63 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
{
+ "bitmaps": 0,
"required": 589824,
"fully-allocated": 1074135040
}
@@ -202,6 +213,7 @@ converted image file size in bytes: 524288
== qcow2 input image with internal snapshot (json) ==
{
+ "bitmaps": 0,
"required": 524288,
"fully-allocated": 1074135040
}
@@ -211,6 +223,7 @@ converted image file size in bytes: 458752
== qcow2 input image and a backing file (json) ==
{
+ "bitmaps": 0,
"required": 1074135040,
"fully-allocated": 1074135040
}
@@ -218,6 +231,7 @@ converted image file size in bytes: 458752
== qcow2 input image and LUKS encryption ==
{
+ "bitmaps": 0,
"required": 2686976,
"fully-allocated": 1076232192
}
@@ -225,6 +239,7 @@ converted image file size in bytes: 458752
== qcow2 input image and preallocation (json) ==
{
+ "bitmaps": 0,
"required": 1074135040,
"fully-allocated": 1074135040
}
@@ -237,6 +252,7 @@ Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=8388608
wrote 8388608/8388608 bytes at offset 0
8 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
{
+ "bitmaps": 0,
"required": 8716288,
"fully-allocated": 8716288
}
diff --git a/tests/qemu-iotests/190 b/tests/qemu-iotests/190
index 6d41650438e1..0c37862c6709 100755
--- a/tests/qemu-iotests/190
+++ b/tests/qemu-iotests/190
@@ -2,7 +2,7 @@
#
# qemu-img measure sub-command tests on huge qcow2 files
#
-# Copyright (C) 2017 Red Hat, Inc.
+# Copyright (C) 2017-2020 Red Hat, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -42,7 +42,7 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto file
-echo "== Huge file =="
+echo "== Huge file without bitmaps =="
echo
_make_test_img -o 'cluster_size=2M' 2T
@@ -51,6 +51,47 @@ $QEMU_IMG measure -O raw -f qcow2 "$TEST_IMG"
$QEMU_IMG measure -O qcow2 -o cluster_size=64k -f qcow2 "$TEST_IMG"
$QEMU_IMG measure -O qcow2 -o cluster_size=2M -f qcow2 "$TEST_IMG"
+echo
+echo "== Huge file with bitmaps =="
+echo
+
+$QEMU_IMG bitmap --add --granularity 512 -f qcow2 "$TEST_IMG" b1
+$QEMU_IMG bitmap --add -g 2M -f qcow2 "$TEST_IMG" b2
+
+# No bitmap without a source
+$QEMU_IMG measure -O qcow2 --size 10M
+# No bitmap output, since raw does not support it
+$QEMU_IMG measure -O raw -f qcow2 "$TEST_IMG"
+# No bitmap output, since no bitmaps on raw source
+$QEMU_IMG measure -O qcow2 -f raw "$TEST_IMG"
+# No bitmap output, since v2 does not support it
+$QEMU_IMG measure -O qcow2 -o compat=0.10 -f qcow2 "$TEST_IMG"
+
+# Compute expected output: bitmap clusters + bitmap tables + bitmaps directory
+echo
+val2T=$((2*1024*1024*1024*1024))
+cluster=$((64*1024))
+b1clusters=$(( (val2T/512/8 + cluster - 1) / cluster ))
+b2clusters=$(( (val2T/2/1024/1024/8 + cluster - 1) / cluster ))
+echo expected bitmap $((b1clusters * cluster +
+ (b1clusters * 8 + cluster - 1) / cluster * cluster +
+ b2clusters * cluster +
+ (b2clusters * 8 + cluster - 1) / cluster * cluster +
+ cluster))
+$QEMU_IMG measure -O qcow2 -o cluster_size=64k -f qcow2 "$TEST_IMG"
+
+# Compute expected output: bitmap clusters + bitmap tables + bitmaps directory
+echo
+cluster=$((2*1024*1024))
+b1clusters=$(( (val2T/512/8 + cluster - 1) / cluster ))
+b2clusters=$(( (val2T/2/1024/1024/8 + cluster - 1) / cluster ))
+echo expected bitmap $((b1clusters * cluster +
+ (b1clusters * 8 + cluster - 1) / cluster * cluster +
+ b2clusters * cluster +
+ (b2clusters * 8 + cluster - 1) / cluster * cluster +
+ cluster))
+$QEMU_IMG measure --output=json -O qcow2 -o cluster_size=2M -f qcow2 "$TEST_IMG"
+
# success, all done
echo "*** done"
rm -f $seq.full
diff --git a/tests/qemu-iotests/190.out b/tests/qemu-iotests/190.out
index d001942002db..e9c5a2e1e481 100644
--- a/tests/qemu-iotests/190.out
+++ b/tests/qemu-iotests/190.out
@@ -1,11 +1,36 @@
QA output created by 190
-== Huge file ==
+== Huge file without bitmaps ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=2199023255552
required size: 2199023255552
fully allocated size: 2199023255552
required size: 335806464
fully allocated size: 2199359062016
+bitmaps size: 0
required size: 18874368
fully allocated size: 2199042129920
+bitmaps size: 0
+
+== Huge file with bitmaps ==
+
+required size: 327680
+fully allocated size: 10813440
+required size: 2199023255552
+fully allocated size: 2199023255552
+required size: 7012352
+fully allocated size: 17170432
+required size: 335806464
+fully allocated size: 2199359062016
+
+expected bitmap 537198592
+required size: 335806464
+fully allocated size: 2199359062016
+bitmaps size: 537198592
+
+expected bitmap 545259520
+{
+ "bitmaps": 545259520,
+ "required": 18874368,
+ "fully-allocated": 2199042129920
+}
*** done
--
2.26.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v6 2/5] qcow2: Expose bitmaps' size during measure
2020-05-21 19:21 ` [PATCH v6 2/5] qcow2: Expose bitmaps' size during measure Eric Blake
@ 2020-05-25 7:05 ` Vladimir Sementsov-Ogievskiy
0 siblings, 0 replies; 12+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2020-05-25 7:05 UTC (permalink / raw)
To: Eric Blake, qemu-devel
Cc: kwolf, qemu-block, Markus Armbruster, mreitz, nsoffer, John Snow
21.05.2020 22:21, Eric Blake wrote:
> It's useful to know how much space can be occupied by qcow2 persistent
> bitmaps, even though such metadata is unrelated to the guest-visible
> data. Report this value as an additional QMP field, present when
> measuring an existing image and output format that both support
> bitmaps. Update iotest 178 and 190 to updated output, as well as new
> coverage in 190 demonstrating non-zero values made possible with the
> recently-added qemu-img bitmap command (see 3b51ab4b).
>
> The new 'bitmaps size:' field is displayed automatically as part of
> 'qemu-img measure' any time it is present in QMP (that is, any time
> both the source image being measured and destination format support
> bitmaps, even if the measurement is 0 because there are no bitmaps
> present). If the field is absent, it means that no bitmaps can be
> copied (source, destination, or both lack bitmaps, including when
> measuring based on size rather than on a source image). This behavior
> is compatible with an upcoming patch adding 'qemu-img convert
> --bitmaps': that command will fail in the same situations where this
> patch omits the field.
>
> The addition of a new field demonstrates why we should always
> zero-initialize qapi C structs; while the qcow2 driver still fully
> populates all fields, the raw and crypto drivers had to be tweaked to
> avoid uninitialized data.
>
> See also:https://bugzilla.redhat.com/1779904
>
> Reported-by: Nir Soffer<nsoffer@redhat.com>
> Signed-off-by: Eric Blake<eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
--
Best regards,
Vladimir
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH v6 3/5] qemu-img: Factor out code for merging bitmaps
2020-05-21 19:21 [PATCH v6 0/5] qemu-img: Add convert --bitmaps Eric Blake
2020-05-21 19:21 ` [PATCH v6 1/5] iotests: Fix test 178 Eric Blake
2020-05-21 19:21 ` [PATCH v6 2/5] qcow2: Expose bitmaps' size during measure Eric Blake
@ 2020-05-21 19:21 ` Eric Blake
2020-05-25 7:12 ` Vladimir Sementsov-Ogievskiy
2020-05-21 19:21 ` [PATCH v6 4/5] qemu-img: Add convert --bitmaps option Eric Blake
2020-05-21 19:21 ` [PATCH v6 5/5] iotests: Add test 291 to for qemu-img bitmap coverage Eric Blake
4 siblings, 1 reply; 12+ messages in thread
From: Eric Blake @ 2020-05-21 19:21 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, nsoffer, vsementsov, qemu-block, mreitz
The next patch will add another client that wants to merge dirty
bitmaps; it will be easier to refactor the code to construct the QAPI
struct correctly into a helper function.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
qemu-img.c | 34 +++++++++++++++++++++-------------
1 file changed, 21 insertions(+), 13 deletions(-)
diff --git a/qemu-img.c b/qemu-img.c
index b2311bd3f6b4..0778d8f56614 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -1638,6 +1638,24 @@ out4:
return ret;
}
+/* Convenience wrapper around qmp_block_dirty_bitmap_merge */
+static void do_dirty_bitmap_merge(const char *dst_node, const char *dst_name,
+ const char *src_node, const char *src_name,
+ Error **errp)
+{
+ BlockDirtyBitmapMergeSource *merge_src;
+ BlockDirtyBitmapMergeSourceList *list;
+
+ merge_src = g_new0(BlockDirtyBitmapMergeSource, 1);
+ merge_src->type = QTYPE_QDICT;
+ merge_src->u.external.node = g_strdup(src_node);
+ merge_src->u.external.name = g_strdup(src_name);
+ list = g_new0(BlockDirtyBitmapMergeSourceList, 1);
+ list->value = merge_src;
+ qmp_block_dirty_bitmap_merge(dst_node, dst_name, list, errp);
+ qapi_free_BlockDirtyBitmapMergeSourceList(list);
+}
+
enum ImgConvertBlockStatus {
BLK_DATA,
BLK_ZERO,
@@ -4714,21 +4732,11 @@ static int img_bitmap(int argc, char **argv)
qmp_block_dirty_bitmap_disable(bs->node_name, bitmap, &err);
op = "disable";
break;
- case BITMAP_MERGE: {
- BlockDirtyBitmapMergeSource *merge_src;
- BlockDirtyBitmapMergeSourceList *list;
-
- merge_src = g_new0(BlockDirtyBitmapMergeSource, 1);
- merge_src->type = QTYPE_QDICT;
- merge_src->u.external.node = g_strdup(src_bs->node_name);
- merge_src->u.external.name = g_strdup(act->src);
- list = g_new0(BlockDirtyBitmapMergeSourceList, 1);
- list->value = merge_src;
- qmp_block_dirty_bitmap_merge(bs->node_name, bitmap, list, &err);
- qapi_free_BlockDirtyBitmapMergeSourceList(list);
+ case BITMAP_MERGE:
+ do_dirty_bitmap_merge(bs->node_name, bitmap, src_bs->node_name,
+ act->src, &err);
op = "merge";
break;
- }
default:
g_assert_not_reached();
}
--
2.26.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* [PATCH v6 4/5] qemu-img: Add convert --bitmaps option
2020-05-21 19:21 [PATCH v6 0/5] qemu-img: Add convert --bitmaps Eric Blake
` (2 preceding siblings ...)
2020-05-21 19:21 ` [PATCH v6 3/5] qemu-img: Factor out code for merging bitmaps Eric Blake
@ 2020-05-21 19:21 ` Eric Blake
2020-05-25 7:51 ` Vladimir Sementsov-Ogievskiy
2020-05-21 19:21 ` [PATCH v6 5/5] iotests: Add test 291 to for qemu-img bitmap coverage Eric Blake
4 siblings, 1 reply; 12+ messages in thread
From: Eric Blake @ 2020-05-21 19:21 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, nsoffer, vsementsov, qemu-block, mreitz
Make it easier to copy all the persistent bitmaps of (the top layer
of) a source image along with its guest-visible contents, by adding a
boolean flag for use with qemu-img convert. This is basically
shorthand, as the same effect could be accomplished with a series of
'qemu-img bitmap --add' and 'qemu-img bitmap --merge -b source'
commands, or by their corresponding QMP commands.
Note that this command will fail in the same scenarios where 'qemu-img
measure' omits a 'bitmaps size:' line, namely, when either the source
or the destination lacks persistent bitmap support altogether.
See also https://bugzilla.redhat.com/show_bug.cgi?id=1779893
While touching this, clean up a couple coding issues spotted in the
same function: an extra blank line, and merging back-to-back 'if
(!skip_create)' blocks.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
docs/tools/qemu-img.rst | 6 +++-
qemu-img.c | 78 +++++++++++++++++++++++++++++++++++++++--
qemu-img-cmds.hx | 4 +--
3 files changed, 82 insertions(+), 6 deletions(-)
diff --git a/docs/tools/qemu-img.rst b/docs/tools/qemu-img.rst
index 320cb52b9f61..69cd9a30373a 100644
--- a/docs/tools/qemu-img.rst
+++ b/docs/tools/qemu-img.rst
@@ -162,6 +162,10 @@ Parameters to convert subcommand:
.. program:: qemu-img-convert
+.. option:: --bitmaps
+
+ Additionally copy all persistent bitmaps from the top layer of the source
+
.. option:: -n
Skip the creation of the target volume
@@ -397,7 +401,7 @@ Command description:
4
Error on reading data
-.. option:: convert [--object OBJECTDEF] [--image-opts] [--target-image-opts] [--target-is-zero] [-U] [-C] [-c] [-p] [-q] [-n] [-f FMT] [-t CACHE] [-T SRC_CACHE] [-O OUTPUT_FMT] [-B BACKING_FILE] [-o OPTIONS] [-l SNAPSHOT_PARAM] [-S SPARSE_SIZE] [-m NUM_COROUTINES] [-W] FILENAME [FILENAME2 [...]] OUTPUT_FILENAME
+.. option:: convert [--object OBJECTDEF] [--image-opts] [--target-image-opts] [--target-is-zero] [--bitmaps] [-U] [-C] [-c] [-p] [-q] [-n] [-f FMT] [-t CACHE] [-T SRC_CACHE] [-O OUTPUT_FMT] [-B BACKING_FILE] [-o OPTIONS] [-l SNAPSHOT_PARAM] [-S SPARSE_SIZE] [-m NUM_COROUTINES] [-W] FILENAME [FILENAME2 [...]] OUTPUT_FILENAME
Convert the disk image *FILENAME* or a snapshot *SNAPSHOT_PARAM*
to disk image *OUTPUT_FILENAME* using format *OUTPUT_FMT*. It can
diff --git a/qemu-img.c b/qemu-img.c
index 0778d8f56614..8ecebe178890 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -78,6 +78,7 @@ enum {
OPTION_ENABLE = 272,
OPTION_DISABLE = 273,
OPTION_MERGE = 274,
+ OPTION_BITMAPS = 275,
};
typedef enum OutputFormat {
@@ -191,6 +192,7 @@ static void QEMU_NORETURN help(void)
" hiding corruption that has already occurred.\n"
"\n"
"Parameters to convert subcommand:\n"
+ " '--bitmaps' copies all top-level persistent bitmaps to destination\n"
" '-m' specifies how many coroutines work in parallel during the convert\n"
" process (defaults to 8)\n"
" '-W' allow to write to the target out of order rather than sequential\n"
@@ -2139,6 +2141,39 @@ static int convert_do_copy(ImgConvertState *s)
return s->ret;
}
+static int convert_copy_bitmaps(BlockDriverState *src, BlockDriverState *dst)
+{
+ BdrvDirtyBitmap *bm;
+ Error *err = NULL;
+
+ FOR_EACH_DIRTY_BITMAP(src, bm) {
+ const char *name;
+
+ if (!bdrv_dirty_bitmap_get_persistence(bm)) {
+ continue;
+ }
+ name = bdrv_dirty_bitmap_name(bm);
+ qmp_block_dirty_bitmap_add(dst->node_name, name,
+ true, bdrv_dirty_bitmap_granularity(bm),
+ true, true,
+ true, !bdrv_dirty_bitmap_enabled(bm),
+ &err);
+ if (err) {
+ error_reportf_err(err, "Failed to create bitmap %s: ", name);
+ return -1;
+ }
+
+ do_dirty_bitmap_merge(dst->node_name, name, src->node_name, name,
+ &err);
+ if (err) {
+ error_reportf_err(err, "Failed to populate bitmap %s: ", name);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
#define MAX_BUF_SECTORS 32768
static int img_convert(int argc, char **argv)
@@ -2160,6 +2195,8 @@ static int img_convert(int argc, char **argv)
int64_t ret = -EINVAL;
bool force_share = false;
bool explict_min_sparse = false;
+ bool bitmaps = false;
+ size_t nbitmaps = 0;
ImgConvertState s = (ImgConvertState) {
/* Need at least 4k of zeros for sparse detection */
@@ -2179,6 +2216,7 @@ static int img_convert(int argc, char **argv)
{"target-image-opts", no_argument, 0, OPTION_TARGET_IMAGE_OPTS},
{"salvage", no_argument, 0, OPTION_SALVAGE},
{"target-is-zero", no_argument, 0, OPTION_TARGET_IS_ZERO},
+ {"bitmaps", no_argument, 0, OPTION_BITMAPS},
{0, 0, 0, 0}
};
c = getopt_long(argc, argv, ":hf:O:B:Cco:l:S:pt:T:qnm:WU",
@@ -2304,6 +2342,9 @@ static int img_convert(int argc, char **argv)
*/
s.has_zero_init = true;
break;
+ case OPTION_BITMAPS:
+ bitmaps = true;
+ break;
}
}
@@ -2365,7 +2406,6 @@ static int img_convert(int argc, char **argv)
goto fail_getopt;
}
-
/* ret is still -EINVAL until here */
ret = bdrv_parse_cache_mode(src_cache, &src_flags, &src_writethrough);
if (ret < 0) {
@@ -2525,6 +2565,27 @@ static int img_convert(int argc, char **argv)
}
}
+ /* Determine how many bitmaps need copying */
+ if (bitmaps) {
+ BdrvDirtyBitmap *bm;
+
+ if (s.src_num > 1) {
+ error_report("Copying bitmaps only possible with single source");
+ ret = -1;
+ goto out;
+ }
+ if (!bdrv_supports_persistent_dirty_bitmap(blk_bs(s.src[0]))) {
+ error_report("Source lacks bitmap support");
+ ret = -1;
+ goto out;
+ }
+ FOR_EACH_DIRTY_BITMAP(blk_bs(s.src[0]), bm) {
+ if (bdrv_dirty_bitmap_get_persistence(bm)) {
+ nbitmaps++;
+ }
+ }
+ }
+
/*
* The later open call will need any decryption secrets, and
* bdrv_create() will purge "opts", so extract them now before
@@ -2533,9 +2594,7 @@ static int img_convert(int argc, char **argv)
if (!skip_create) {
open_opts = qdict_new();
qemu_opt_foreach(opts, img_add_key_secrets, open_opts, &error_abort);
- }
- if (!skip_create) {
/* Create the new image */
ret = bdrv_create(drv, out_filename, opts, &local_err);
if (ret < 0) {
@@ -2573,6 +2632,13 @@ static int img_convert(int argc, char **argv)
}
out_bs = blk_bs(s.target);
+ if (nbitmaps > 0 && !bdrv_supports_persistent_dirty_bitmap(out_bs)) {
+ error_report("Format driver '%s' does not support bitmaps",
+ out_fmt);
+ ret = -1;
+ goto out;
+ }
+
if (s.compressed && !block_driver_can_compress(out_bs->drv)) {
error_report("Compression not supported for this file format");
ret = -1;
@@ -2632,6 +2698,12 @@ static int img_convert(int argc, char **argv)
}
ret = convert_do_copy(&s);
+
+ /* Now copy the bitmaps */
+ if (nbitmaps > 0 && ret == 0) {
+ ret = convert_copy_bitmaps(blk_bs(s.src[0]), out_bs);
+ }
+
out:
if (!ret) {
qemu_progress_print(100, 0);
diff --git a/qemu-img-cmds.hx b/qemu-img-cmds.hx
index a87d3cb264ce..10b910b67cf8 100644
--- a/qemu-img-cmds.hx
+++ b/qemu-img-cmds.hx
@@ -46,9 +46,9 @@ SRST
ERST
DEF("convert", img_convert,
- "convert [--object objectdef] [--image-opts] [--target-image-opts] [--target-is-zero] [-U] [-C] [-c] [-p] [-q] [-n] [-f fmt] [-t cache] [-T src_cache] [-O output_fmt] [-B backing_file] [-o options] [-l snapshot_param] [-S sparse_size] [-m num_coroutines] [-W] [--salvage] filename [filename2 [...]] output_filename")
+ "convert [--object objectdef] [--image-opts] [--target-image-opts] [--target-is-zero] [--bitmaps] [-U] [-C] [-c] [-p] [-q] [-n] [-f fmt] [-t cache] [-T src_cache] [-O output_fmt] [-B backing_file] [-o options] [-l snapshot_param] [-S sparse_size] [-m num_coroutines] [-W] [--salvage] filename [filename2 [...]] output_filename")
SRST
-.. option:: convert [--object OBJECTDEF] [--image-opts] [--target-image-opts] [--target-is-zero] [-U] [-C] [-c] [-p] [-q] [-n] [-f FMT] [-t CACHE] [-T SRC_CACHE] [-O OUTPUT_FMT] [-B BACKING_FILE] [-o OPTIONS] [-l SNAPSHOT_PARAM] [-S SPARSE_SIZE] [-m NUM_COROUTINES] [-W] [--salvage] FILENAME [FILENAME2 [...]] OUTPUT_FILENAME
+.. option:: convert [--object OBJECTDEF] [--image-opts] [--target-image-opts] [--target-is-zero] [--bitmaps] [-U] [-C] [-c] [-p] [-q] [-n] [-f FMT] [-t CACHE] [-T SRC_CACHE] [-O OUTPUT_FMT] [-B BACKING_FILE] [-o OPTIONS] [-l SNAPSHOT_PARAM] [-S SPARSE_SIZE] [-m NUM_COROUTINES] [-W] [--salvage] FILENAME [FILENAME2 [...]] OUTPUT_FILENAME
ERST
DEF("create", img_create,
--
2.26.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v6 4/5] qemu-img: Add convert --bitmaps option
2020-05-21 19:21 ` [PATCH v6 4/5] qemu-img: Add convert --bitmaps option Eric Blake
@ 2020-05-25 7:51 ` Vladimir Sementsov-Ogievskiy
2020-05-26 16:27 ` Eric Blake
0 siblings, 1 reply; 12+ messages in thread
From: Vladimir Sementsov-Ogievskiy @ 2020-05-25 7:51 UTC (permalink / raw)
To: Eric Blake, qemu-devel; +Cc: kwolf, nsoffer, qemu-block, mreitz
21.05.2020 22:21, Eric Blake wrote:
> Make it easier to copy all the persistent bitmaps of (the top layer
> of) a source image along with its guest-visible contents, by adding a
> boolean flag for use with qemu-img convert. This is basically
> shorthand, as the same effect could be accomplished with a series of
> 'qemu-img bitmap --add' and 'qemu-img bitmap --merge -b source'
> commands, or by their corresponding QMP commands.
>
> Note that this command will fail in the same scenarios where 'qemu-img
> measure' omits a 'bitmaps size:' line, namely, when either the source
> or the destination lacks persistent bitmap support altogether.
>
> See also https://bugzilla.redhat.com/show_bug.cgi?id=1779893
>
> While touching this, clean up a couple coding issues spotted in the
> same function: an extra blank line, and merging back-to-back 'if
> (!skip_create)' blocks.
>
> Signed-off-by: Eric Blake <eblake@redhat.com>
> ---
[..]
> diff --git a/qemu-img.c b/qemu-img.c
> index 0778d8f56614..8ecebe178890 100644
> --- a/qemu-img.c
> +++ b/qemu-img.c
> @@ -78,6 +78,7 @@ enum {
> OPTION_ENABLE = 272,
> OPTION_DISABLE = 273,
> OPTION_MERGE = 274,
[..]
>
> static int img_convert(int argc, char **argv)
> @@ -2160,6 +2195,8 @@ static int img_convert(int argc, char **argv)
> int64_t ret = -EINVAL;
> bool force_share = false;
> bool explict_min_sparse = false;
> + bool bitmaps = false;
> + size_t nbitmaps = 0;
>
> ImgConvertState s = (ImgConvertState) {
> /* Need at least 4k of zeros for sparse detection */
> @@ -2179,6 +2216,7 @@ static int img_convert(int argc, char **argv)
> {"target-image-opts", no_argument, 0, OPTION_TARGET_IMAGE_OPTS},
> {"salvage", no_argument, 0, OPTION_SALVAGE},
> {"target-is-zero", no_argument, 0, OPTION_TARGET_IS_ZERO},
> + {"bitmaps", no_argument, 0, OPTION_BITMAPS},
> {0, 0, 0, 0}
> };
> c = getopt_long(argc, argv, ":hf:O:B:Cco:l:S:pt:T:qnm:WU",
> @@ -2304,6 +2342,9 @@ static int img_convert(int argc, char **argv)
> */
> s.has_zero_init = true;
> break;
> + case OPTION_BITMAPS:
> + bitmaps = true;
> + break;
> }
> }
>
> @@ -2365,7 +2406,6 @@ static int img_convert(int argc, char **argv)
> goto fail_getopt;
> }
>
> -
> /* ret is still -EINVAL until here */
> ret = bdrv_parse_cache_mode(src_cache, &src_flags, &src_writethrough);
> if (ret < 0) {
> @@ -2525,6 +2565,27 @@ static int img_convert(int argc, char **argv)
> }
> }
>
> + /* Determine how many bitmaps need copying */
> + if (bitmaps) {
> + BdrvDirtyBitmap *bm;
> +
> + if (s.src_num > 1) {
> + error_report("Copying bitmaps only possible with single source");
> + ret = -1;
> + goto out;
> + }
> + if (!bdrv_supports_persistent_dirty_bitmap(blk_bs(s.src[0]))) {
> + error_report("Source lacks bitmap support");
> + ret = -1;
> + goto out;
> + }
> + FOR_EACH_DIRTY_BITMAP(blk_bs(s.src[0]), bm) {
> + if (bdrv_dirty_bitmap_get_persistence(bm)) {
> + nbitmaps++;
> + }
> + }
> + }
> +
> /*
> * The later open call will need any decryption secrets, and
> * bdrv_create() will purge "opts", so extract them now before
> @@ -2533,9 +2594,7 @@ static int img_convert(int argc, char **argv)
> if (!skip_create) {
> open_opts = qdict_new();
> qemu_opt_foreach(opts, img_add_key_secrets, open_opts, &error_abort);
> - }
>
> - if (!skip_create) {
> /* Create the new image */
> ret = bdrv_create(drv, out_filename, opts, &local_err);
> if (ret < 0) {
> @@ -2573,6 +2632,13 @@ static int img_convert(int argc, char **argv)
> }
> out_bs = blk_bs(s.target);
>
> + if (nbitmaps > 0 && !bdrv_supports_persistent_dirty_bitmap(out_bs)) {
We will not fail, if target doesn't support bitmaps, source supports them but has no bitmaps? Doesn't seem to be a problem, but a bit less strict than you write in commit message.
So, maybe, s/nbitmaps > 0/bitmaps/
> + error_report("Format driver '%s' does not support bitmaps",
> + out_fmt);
Hmm seems, out_fmt may be NULL at this point, consider the path:
const char *out_fmt = NULL
...
[no -O option]
--target-image-opts, so out_fmt doesn't default to "raw" but remains NULL
...
So, with s/out_fmt/out_bs->drv->format_name/ (and with or without s/nbitmaps > 0/bitmaps/):
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
--
Best regards,
Vladimir
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH v6 4/5] qemu-img: Add convert --bitmaps option
2020-05-25 7:51 ` Vladimir Sementsov-Ogievskiy
@ 2020-05-26 16:27 ` Eric Blake
0 siblings, 0 replies; 12+ messages in thread
From: Eric Blake @ 2020-05-26 16:27 UTC (permalink / raw)
To: Vladimir Sementsov-Ogievskiy, qemu-devel
Cc: kwolf, nsoffer, qemu-block, mreitz
On 5/25/20 2:51 AM, Vladimir Sementsov-Ogievskiy wrote:
> 21.05.2020 22:21, Eric Blake wrote:
>> Make it easier to copy all the persistent bitmaps of (the top layer
>> of) a source image along with its guest-visible contents, by adding a
>> boolean flag for use with qemu-img convert. This is basically
>> shorthand, as the same effect could be accomplished with a series of
>> 'qemu-img bitmap --add' and 'qemu-img bitmap --merge -b source'
>> commands, or by their corresponding QMP commands.
>>
>> Note that this command will fail in the same scenarios where 'qemu-img
>> measure' omits a 'bitmaps size:' line, namely, when either the source
>> or the destination lacks persistent bitmap support altogether.
>>
>> See also https://bugzilla.redhat.com/show_bug.cgi?id=1779893
>>
>> While touching this, clean up a couple coding issues spotted in the
>> same function: an extra blank line, and merging back-to-back 'if
>> (!skip_create)' blocks.
>>
>> Signed-off-by: Eric Blake <eblake@redhat.com>
>> ---
>
>> @@ -2573,6 +2632,13 @@ static int img_convert(int argc, char **argv)
>> }
>> out_bs = blk_bs(s.target);
>>
>> + if (nbitmaps > 0 &&
>> !bdrv_supports_persistent_dirty_bitmap(out_bs)) {
>
> We will not fail, if target doesn't support bitmaps, source supports
> them but has no bitmaps? Doesn't seem to be a problem, but a bit less
> strict than you write in commit message.
>
> So, maybe, s/nbitmaps > 0/bitmaps/
In fact, nbitmaps is not needed at all (it was useful in earlier
iterations, but as the series has morphed, it is no longer buying me
anything useful).
>
>> + error_report("Format driver '%s' does not support bitmaps",
>> + out_fmt);
>
> Hmm seems, out_fmt may be NULL at this point, consider the path:
> const char *out_fmt = NULL
> ...
> [no -O option]
> --target-image-opts, so out_fmt doesn't default to "raw" but remains NULL
> ...
>
> So, with s/out_fmt/out_bs->drv->format_name/ (and with or without
> s/nbitmaps > 0/bitmaps/):
>
>
> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Okay, I'm squashing this in, and adding your R-b. Pull request coming
shortly.
diff --git i/qemu-img.c w/qemu-img.c
index 8ecebe178890..d7e846e60742 100644
--- i/qemu-img.c
+++ w/qemu-img.c
@@ -2196,7 +2196,6 @@ static int img_convert(int argc, char **argv)
bool force_share = false;
bool explict_min_sparse = false;
bool bitmaps = false;
- size_t nbitmaps = 0;
ImgConvertState s = (ImgConvertState) {
/* Need at least 4k of zeros for sparse detection */
@@ -2565,10 +2564,8 @@ static int img_convert(int argc, char **argv)
}
}
- /* Determine how many bitmaps need copying */
+ /* Determine if bitmaps need copying */
if (bitmaps) {
- BdrvDirtyBitmap *bm;
-
if (s.src_num > 1) {
error_report("Copying bitmaps only possible with single
source");
ret = -1;
@@ -2579,11 +2576,6 @@ static int img_convert(int argc, char **argv)
ret = -1;
goto out;
}
- FOR_EACH_DIRTY_BITMAP(blk_bs(s.src[0]), bm) {
- if (bdrv_dirty_bitmap_get_persistence(bm)) {
- nbitmaps++;
- }
- }
}
/*
@@ -2632,9 +2624,9 @@ static int img_convert(int argc, char **argv)
}
out_bs = blk_bs(s.target);
- if (nbitmaps > 0 && !bdrv_supports_persistent_dirty_bitmap(out_bs)) {
+ if (bitmaps && !bdrv_supports_persistent_dirty_bitmap(out_bs)) {
error_report("Format driver '%s' does not support bitmaps",
- out_fmt);
+ out_bs->drv->format_name);
ret = -1;
goto out;
}
@@ -2700,7 +2692,7 @@ static int img_convert(int argc, char **argv)
ret = convert_do_copy(&s);
/* Now copy the bitmaps */
- if (nbitmaps > 0 && ret == 0) {
+ if (bitmaps && ret == 0) {
ret = convert_copy_bitmaps(blk_bs(s.src[0]), out_bs);
}
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3226
Virtualization: qemu.org | libvirt.org
^ permalink raw reply related [flat|nested] 12+ messages in thread
* [PATCH v6 5/5] iotests: Add test 291 to for qemu-img bitmap coverage
2020-05-21 19:21 [PATCH v6 0/5] qemu-img: Add convert --bitmaps Eric Blake
` (3 preceding siblings ...)
2020-05-21 19:21 ` [PATCH v6 4/5] qemu-img: Add convert --bitmaps option Eric Blake
@ 2020-05-21 19:21 ` Eric Blake
2020-06-08 19:17 ` Kevin Wolf
4 siblings, 1 reply; 12+ messages in thread
From: Eric Blake @ 2020-05-21 19:21 UTC (permalink / raw)
To: qemu-devel; +Cc: kwolf, nsoffer, vsementsov, qemu-block, mreitz
Add a new test covering the 'qemu-img bitmap' subcommand, as well as
'qemu-img convert --bitmaps', both added in recent patches.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
tests/qemu-iotests/291 | 112 +++++++++++++++++++++++++++++++++++++
tests/qemu-iotests/291.out | 80 ++++++++++++++++++++++++++
tests/qemu-iotests/group | 1 +
3 files changed, 193 insertions(+)
create mode 100755 tests/qemu-iotests/291
create mode 100644 tests/qemu-iotests/291.out
diff --git a/tests/qemu-iotests/291 b/tests/qemu-iotests/291
new file mode 100755
index 000000000000..3ca83b9cd1f7
--- /dev/null
+++ b/tests/qemu-iotests/291
@@ -0,0 +1,112 @@
+#!/usr/bin/env bash
+#
+# Test qemu-img bitmap handling
+#
+# Copyright (C) 2018-2020 Red Hat, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+seq="$(basename $0)"
+echo "QA output created by $seq"
+
+status=1 # failure is the default!
+
+_cleanup()
+{
+ _cleanup_test_img
+ nbd_server_stop
+}
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./common.filter
+. ./common.nbd
+
+_supported_fmt qcow2
+_supported_proto file
+_supported_os Linux
+_require_command QEMU_NBD
+
+echo
+echo "=== Initial image setup ==="
+echo
+
+# Create backing image with one bitmap
+TEST_IMG="$TEST_IMG.base" _make_test_img 10M
+$QEMU_IMG bitmap --add -f $IMGFMT "$TEST_IMG.base" b0
+$QEMU_IO -c 'w 3M 1M' -f $IMGFMT "$TEST_IMG.base" | _filter_qemu_io
+
+# Create initial image and populate two bitmaps: one active, one inactive.
+ORIG_IMG=$TEST_IMG
+TEST_IMG=$TEST_IMG.orig
+_make_test_img -b "$ORIG_IMG.base" -F $IMGFMT 10M
+$QEMU_IO -c 'w 0 1M' -f $IMGFMT "$TEST_IMG" | _filter_qemu_io
+$QEMU_IMG bitmap --add -g 512k -f $IMGFMT "$TEST_IMG" b1
+$QEMU_IMG bitmap --add --disable -f $IMGFMT "$TEST_IMG" b2
+$QEMU_IO -c 'w 3M 1M' -f $IMGFMT "$TEST_IMG" | _filter_qemu_io
+$QEMU_IMG bitmap --clear -f $IMGFMT "$TEST_IMG" b1
+$QEMU_IO -c 'w 1M 1M' -f $IMGFMT "$TEST_IMG" | _filter_qemu_io
+$QEMU_IMG bitmap --disable -f $IMGFMT "$TEST_IMG" b1
+$QEMU_IMG bitmap --enable -f $IMGFMT "$TEST_IMG" b2
+$QEMU_IO -c 'w 2M 1M' -f $IMGFMT "$TEST_IMG" | _filter_qemu_io
+
+echo
+echo "=== Bitmap preservation not possible to non-qcow2 ==="
+echo
+
+TEST_IMG=$ORIG_IMG
+$QEMU_IMG convert --bitmaps -O raw "$TEST_IMG.orig" "$TEST_IMG" &&
+ echo "unexpected success"
+
+echo
+echo "=== Convert with bitmap preservation ==="
+echo
+
+# Only bitmaps from the active layer are copied
+$QEMU_IMG convert --bitmaps -O qcow2 "$TEST_IMG.orig" "$TEST_IMG"
+$QEMU_IMG info "$TEST_IMG" | _filter_img_info --format-specific
+# But we can also merge in bitmaps from other layers. This test is a bit
+# contrived to cover more code paths, in reality, you could merge directly
+# into b0 without going through tmp
+$QEMU_IMG bitmap --add --disable -f $IMGFMT "$TEST_IMG" b0
+$QEMU_IMG bitmap --add --merge b0 -b "$TEST_IMG.base" -F $IMGFMT \
+ -f $IMGFMT "$TEST_IMG" tmp
+$QEMU_IMG bitmap --merge tmp -f $IMGFMT "$TEST_IMG" b0
+$QEMU_IMG bitmap --remove --image-opts \
+ driver=$IMGFMT,file.driver=file,file.filename="$TEST_IMG" tmp
+$QEMU_IMG info "$TEST_IMG" | _filter_img_info --format-specific
+
+echo
+echo "=== Check bitmap contents ==="
+echo
+
+# x-dirty-bitmap is a hack for reading bitmaps; it abuses block status to
+# report "data":false for portions of the bitmap which are set
+IMG="driver=nbd,server.type=unix,server.path=$nbd_unix_socket"
+nbd_server_start_unix_socket -r -f qcow2 -B b0 "$TEST_IMG"
+$QEMU_IMG map --output=json --image-opts \
+ "$IMG,x-dirty-bitmap=qemu:dirty-bitmap:b0" | _filter_qemu_img_map
+nbd_server_start_unix_socket -r -f qcow2 -B b1 "$TEST_IMG"
+$QEMU_IMG map --output=json --image-opts \
+ "$IMG,x-dirty-bitmap=qemu:dirty-bitmap:b1" | _filter_qemu_img_map
+nbd_server_start_unix_socket -r -f qcow2 -B b2 "$TEST_IMG"
+$QEMU_IMG map --output=json --image-opts \
+ "$IMG,x-dirty-bitmap=qemu:dirty-bitmap:b2" | _filter_qemu_img_map
+
+# success, all done
+echo '*** done'
+rm -f $seq.full
+status=0
diff --git a/tests/qemu-iotests/291.out b/tests/qemu-iotests/291.out
new file mode 100644
index 000000000000..8c62017567e9
--- /dev/null
+++ b/tests/qemu-iotests/291.out
@@ -0,0 +1,80 @@
+QA output created by 291
+
+=== Initial image setup ===
+
+Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=10485760
+wrote 1048576/1048576 bytes at offset 3145728
+1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+Formatting 'TEST_DIR/t.IMGFMT.orig', fmt=IMGFMT size=10485760 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
+wrote 1048576/1048576 bytes at offset 0
+1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 1048576/1048576 bytes at offset 3145728
+1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 1048576/1048576 bytes at offset 1048576
+1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+wrote 1048576/1048576 bytes at offset 2097152
+1 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
+
+=== Bitmap preservation not possible to non-qcow2 ===
+
+qemu-img: Format driver 'raw' does not support bitmaps
+
+=== Convert with bitmap preservation ===
+
+image: TEST_DIR/t.IMGFMT
+file format: IMGFMT
+virtual size: 10 MiB (10485760 bytes)
+disk size: 4.39 MiB
+Format specific information:
+ compat: 1.1
+ compression type: zlib
+ lazy refcounts: false
+ bitmaps:
+ [0]:
+ flags:
+ name: b1
+ granularity: 524288
+ [1]:
+ flags:
+ [0]: auto
+ name: b2
+ granularity: 65536
+ refcount bits: 16
+ corrupt: false
+image: TEST_DIR/t.IMGFMT
+file format: IMGFMT
+virtual size: 10 MiB (10485760 bytes)
+disk size: 4.48 MiB
+Format specific information:
+ compat: 1.1
+ compression type: zlib
+ lazy refcounts: false
+ bitmaps:
+ [0]:
+ flags:
+ name: b1
+ granularity: 524288
+ [1]:
+ flags:
+ [0]: auto
+ name: b2
+ granularity: 65536
+ [2]:
+ flags:
+ name: b0
+ granularity: 65536
+ refcount bits: 16
+ corrupt: false
+
+=== Check bitmap contents ===
+
+[{ "start": 0, "length": 3145728, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 3145728, "length": 1048576, "depth": 0, "zero": false, "data": false},
+{ "start": 4194304, "length": 6291456, "depth": 0, "zero": false, "data": true, "offset": OFFSET}]
+[{ "start": 0, "length": 1048576, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 1048576, "length": 1048576, "depth": 0, "zero": false, "data": false},
+{ "start": 2097152, "length": 8388608, "depth": 0, "zero": false, "data": true, "offset": OFFSET}]
+[{ "start": 0, "length": 2097152, "depth": 0, "zero": false, "data": true, "offset": OFFSET},
+{ "start": 2097152, "length": 1048576, "depth": 0, "zero": false, "data": false},
+{ "start": 3145728, "length": 7340032, "depth": 0, "zero": false, "data": true, "offset": OFFSET}]
+*** done
diff --git a/tests/qemu-iotests/group b/tests/qemu-iotests/group
index 445c26f8d2e2..d886fa0cb355 100644
--- a/tests/qemu-iotests/group
+++ b/tests/qemu-iotests/group
@@ -299,5 +299,6 @@
288 quick
289 rw quick
290 rw auto quick
+291 rw quick
292 rw auto quick
297 meta
--
2.26.2
^ permalink raw reply related [flat|nested] 12+ messages in thread* Re: [PATCH v6 5/5] iotests: Add test 291 to for qemu-img bitmap coverage
2020-05-21 19:21 ` [PATCH v6 5/5] iotests: Add test 291 to for qemu-img bitmap coverage Eric Blake
@ 2020-06-08 19:17 ` Kevin Wolf
2020-06-08 19:32 ` Eric Blake
0 siblings, 1 reply; 12+ messages in thread
From: Kevin Wolf @ 2020-06-08 19:17 UTC (permalink / raw)
To: Eric Blake; +Cc: nsoffer, vsementsov, qemu-devel, qemu-block, mreitz
Am 21.05.2020 um 21:21 hat Eric Blake geschrieben:
> Add a new test covering the 'qemu-img bitmap' subcommand, as well as
> 'qemu-img convert --bitmaps', both added in recent patches.
>
> Signed-off-by: Eric Blake <eblake@redhat.com>
> Reviewed-by: Max Reitz <mreitz@redhat.com>
> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
This one fails for me. We need to filter out "disk size" because it
depends on the filesystem.
Kevin
291 fail [21:10:19] [21:10:21] output mismatch (see 291.out.bad)
--- /home/kwolf/source/qemu/tests/qemu-iotests/291.out 2020-06-08 21:04:38.967014949 +0200
+++ /home/kwolf/source/qemu/tests/qemu-iotests/291.out.bad 2020-06-08 21:10:21.043763527 +0200
@@ -24,7 +24,7 @@
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
virtual size: 10 MiB (10485760 bytes)
-disk size: 4.39 MiB
+disk size: 4.51 MiB
Format specific information:
compat: 1.1
compression type: zlib
@@ -44,7 +44,7 @@
image: TEST_DIR/t.IMGFMT
file format: IMGFMT
virtual size: 10 MiB (10485760 bytes)
-disk size: 4.48 MiB
+disk size: 5.08 MiB
Format specific information:
compat: 1.1
compression type: zlib
Failures: 291
Failed 1 of 1 iotests
^ permalink raw reply [flat|nested] 12+ messages in thread* Re: [PATCH v6 5/5] iotests: Add test 291 to for qemu-img bitmap coverage
2020-06-08 19:17 ` Kevin Wolf
@ 2020-06-08 19:32 ` Eric Blake
0 siblings, 0 replies; 12+ messages in thread
From: Eric Blake @ 2020-06-08 19:32 UTC (permalink / raw)
To: Kevin Wolf; +Cc: nsoffer, vsementsov, qemu-devel, qemu-block, mreitz
On 6/8/20 2:17 PM, Kevin Wolf wrote:
> Am 21.05.2020 um 21:21 hat Eric Blake geschrieben:
>> Add a new test covering the 'qemu-img bitmap' subcommand, as well as
>> 'qemu-img convert --bitmaps', both added in recent patches.
>>
>> Signed-off-by: Eric Blake <eblake@redhat.com>
>> Reviewed-by: Max Reitz <mreitz@redhat.com>
>> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
>
> This one fails for me. We need to filter out "disk size" because it
> depends on the filesystem.
Will fix. Thanks for the heads up.
--
Eric Blake, Principal Software Engineer
Red Hat, Inc. +1-919-301-3226
Virtualization: qemu.org | libvirt.org
^ permalink raw reply [flat|nested] 12+ messages in thread