All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandru Ardelean <alexandru.ardelean@analog.com>
To: <linux-iio@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: <jic23@kernel.org>, <nicolas.ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>,
	<ludovic.desroches@microchip.com>,
	"Alexandru Ardelean" <alexandru.ardelean@analog.com>
Subject: [PATCH] iio: at91_adc: remove usage of iio_priv_to_dev() helper
Date: Mon, 25 May 2020 13:25:13 +0300	[thread overview]
Message-ID: <20200525102513.130664-1-alexandru.ardelean@analog.com> (raw)

We may want to get rid of the iio_priv_to_dev() helper. The reason is that
we will hide some of the members of the iio_dev structure (to prevent
drivers from accessing them directly), and that will also mean hiding the
implementation of the iio_priv_to_dev() helper inside the IIO core.

Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
The iio_priv() helper won't be affected by the rework, as the iio_dev
struct will keep a reference to the private information.

For this driver, not using iio_priv_to_dev(), means reworking some paths to
pass the iio device and using iio_priv() to access the private information.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
 drivers/iio/adc/at91_adc.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 0368b6dc6d60..896af58e88bc 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -287,13 +287,13 @@ static void handle_adc_eoc_trigger(int irq, struct iio_dev *idev)
 	}
 }
 
-static int at91_ts_sample(struct at91_adc_state *st)
+static int at91_ts_sample(struct iio_dev *idev)
 {
+	struct at91_adc_state *st = iio_priv(idev);
 	unsigned int xscale, yscale, reg, z1, z2;
 	unsigned int x, y, pres, xpos, ypos;
 	unsigned int rxp = 1;
 	unsigned int factor = 1000;
-	struct iio_dev *idev = iio_priv_to_dev(st);
 
 	unsigned int xyz_mask_bits = st->res;
 	unsigned int xyz_mask = (1 << xyz_mask_bits) - 1;
@@ -449,7 +449,7 @@ static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
 
 		if (status & AT91_ADC_ISR_PENS) {
 			/* validate data by pen contact */
-			at91_ts_sample(st);
+			at91_ts_sample(idev);
 		} else {
 			/* triggered by event that is no pen contact, just read
 			 * them to clean the interrupt and discard all.
@@ -737,10 +737,10 @@ static int at91_adc_read_raw(struct iio_dev *idev,
 	return -EINVAL;
 }
 
-static int at91_adc_of_get_resolution(struct at91_adc_state *st,
+static int at91_adc_of_get_resolution(struct iio_dev *idev,
 				      struct platform_device *pdev)
 {
-	struct iio_dev *idev = iio_priv_to_dev(st);
+	struct at91_adc_state *st = iio_priv(idev);
 	struct device_node *np = pdev->dev.of_node;
 	int count, i, ret = 0;
 	char *res_name, *s;
@@ -866,10 +866,10 @@ static int at91_adc_probe_dt_ts(struct device_node *node,
 	}
 }
 
-static int at91_adc_probe_dt(struct at91_adc_state *st,
+static int at91_adc_probe_dt(struct iio_dev *idev,
 			     struct platform_device *pdev)
 {
-	struct iio_dev *idev = iio_priv_to_dev(st);
+	struct at91_adc_state *st = iio_priv(idev);
 	struct device_node *node = pdev->dev.of_node;
 	struct device_node *trig_node;
 	int i = 0, ret;
@@ -910,7 +910,7 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
 	}
 	st->vref_mv = prop;
 
-	ret = at91_adc_of_get_resolution(st, pdev);
+	ret = at91_adc_of_get_resolution(idev, pdev);
 	if (ret)
 		goto error_ret;
 
@@ -1010,9 +1010,9 @@ static void atmel_ts_close(struct input_dev *dev)
 		at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN);
 }
 
-static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
+static int at91_ts_hw_init(struct iio_dev *idev, u32 adc_clk_khz)
 {
-	struct iio_dev *idev = iio_priv_to_dev(st);
+	struct at91_adc_state *st = iio_priv(idev);
 	u32 reg = 0;
 	u32 tssctim = 0;
 	int i = 0;
@@ -1085,11 +1085,11 @@ static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
 	return 0;
 }
 
-static int at91_ts_register(struct at91_adc_state *st,
+static int at91_ts_register(struct iio_dev *idev,
 		struct platform_device *pdev)
 {
+	struct at91_adc_state *st = iio_priv(idev);
 	struct input_dev *input;
-	struct iio_dev *idev = iio_priv_to_dev(st);
 	int ret;
 
 	input = input_allocate_device();
@@ -1161,7 +1161,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 	st = iio_priv(idev);
 
 	if (pdev->dev.of_node)
-		ret = at91_adc_probe_dt(st, pdev);
+		ret = at91_adc_probe_dt(idev, pdev);
 	else
 		ret = at91_adc_probe_pdata(st, pdev);
 
@@ -1301,11 +1301,11 @@ static int at91_adc_probe(struct platform_device *pdev)
 			goto error_disable_adc_clk;
 		}
 	} else {
-		ret = at91_ts_register(st, pdev);
+		ret = at91_ts_register(idev, pdev);
 		if (ret)
 			goto error_disable_adc_clk;
 
-		at91_ts_hw_init(st, adc_clk_khz);
+		at91_ts_hw_init(idev, adc_clk_khz);
 	}
 
 	ret = iio_device_register(idev);
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Alexandru Ardelean <alexandru.ardelean@analog.com>
To: <linux-iio@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>
Cc: alexandre.belloni@bootlin.com, ludovic.desroches@microchip.com,
	jic23@kernel.org,
	Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: [PATCH] iio: at91_adc: remove usage of iio_priv_to_dev() helper
Date: Mon, 25 May 2020 13:25:13 +0300	[thread overview]
Message-ID: <20200525102513.130664-1-alexandru.ardelean@analog.com> (raw)

We may want to get rid of the iio_priv_to_dev() helper. The reason is that
we will hide some of the members of the iio_dev structure (to prevent
drivers from accessing them directly), and that will also mean hiding the
implementation of the iio_priv_to_dev() helper inside the IIO core.

Hiding the implementation of iio_priv_to_dev() implies that some fast-paths
may not be fast anymore, so a general idea is to try to get rid of the
iio_priv_to_dev() altogether.
The iio_priv() helper won't be affected by the rework, as the iio_dev
struct will keep a reference to the private information.

For this driver, not using iio_priv_to_dev(), means reworking some paths to
pass the iio device and using iio_priv() to access the private information.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
 drivers/iio/adc/at91_adc.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 0368b6dc6d60..896af58e88bc 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -287,13 +287,13 @@ static void handle_adc_eoc_trigger(int irq, struct iio_dev *idev)
 	}
 }
 
-static int at91_ts_sample(struct at91_adc_state *st)
+static int at91_ts_sample(struct iio_dev *idev)
 {
+	struct at91_adc_state *st = iio_priv(idev);
 	unsigned int xscale, yscale, reg, z1, z2;
 	unsigned int x, y, pres, xpos, ypos;
 	unsigned int rxp = 1;
 	unsigned int factor = 1000;
-	struct iio_dev *idev = iio_priv_to_dev(st);
 
 	unsigned int xyz_mask_bits = st->res;
 	unsigned int xyz_mask = (1 << xyz_mask_bits) - 1;
@@ -449,7 +449,7 @@ static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
 
 		if (status & AT91_ADC_ISR_PENS) {
 			/* validate data by pen contact */
-			at91_ts_sample(st);
+			at91_ts_sample(idev);
 		} else {
 			/* triggered by event that is no pen contact, just read
 			 * them to clean the interrupt and discard all.
@@ -737,10 +737,10 @@ static int at91_adc_read_raw(struct iio_dev *idev,
 	return -EINVAL;
 }
 
-static int at91_adc_of_get_resolution(struct at91_adc_state *st,
+static int at91_adc_of_get_resolution(struct iio_dev *idev,
 				      struct platform_device *pdev)
 {
-	struct iio_dev *idev = iio_priv_to_dev(st);
+	struct at91_adc_state *st = iio_priv(idev);
 	struct device_node *np = pdev->dev.of_node;
 	int count, i, ret = 0;
 	char *res_name, *s;
@@ -866,10 +866,10 @@ static int at91_adc_probe_dt_ts(struct device_node *node,
 	}
 }
 
-static int at91_adc_probe_dt(struct at91_adc_state *st,
+static int at91_adc_probe_dt(struct iio_dev *idev,
 			     struct platform_device *pdev)
 {
-	struct iio_dev *idev = iio_priv_to_dev(st);
+	struct at91_adc_state *st = iio_priv(idev);
 	struct device_node *node = pdev->dev.of_node;
 	struct device_node *trig_node;
 	int i = 0, ret;
@@ -910,7 +910,7 @@ static int at91_adc_probe_dt(struct at91_adc_state *st,
 	}
 	st->vref_mv = prop;
 
-	ret = at91_adc_of_get_resolution(st, pdev);
+	ret = at91_adc_of_get_resolution(idev, pdev);
 	if (ret)
 		goto error_ret;
 
@@ -1010,9 +1010,9 @@ static void atmel_ts_close(struct input_dev *dev)
 		at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN);
 }
 
-static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
+static int at91_ts_hw_init(struct iio_dev *idev, u32 adc_clk_khz)
 {
-	struct iio_dev *idev = iio_priv_to_dev(st);
+	struct at91_adc_state *st = iio_priv(idev);
 	u32 reg = 0;
 	u32 tssctim = 0;
 	int i = 0;
@@ -1085,11 +1085,11 @@ static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
 	return 0;
 }
 
-static int at91_ts_register(struct at91_adc_state *st,
+static int at91_ts_register(struct iio_dev *idev,
 		struct platform_device *pdev)
 {
+	struct at91_adc_state *st = iio_priv(idev);
 	struct input_dev *input;
-	struct iio_dev *idev = iio_priv_to_dev(st);
 	int ret;
 
 	input = input_allocate_device();
@@ -1161,7 +1161,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 	st = iio_priv(idev);
 
 	if (pdev->dev.of_node)
-		ret = at91_adc_probe_dt(st, pdev);
+		ret = at91_adc_probe_dt(idev, pdev);
 	else
 		ret = at91_adc_probe_pdata(st, pdev);
 
@@ -1301,11 +1301,11 @@ static int at91_adc_probe(struct platform_device *pdev)
 			goto error_disable_adc_clk;
 		}
 	} else {
-		ret = at91_ts_register(st, pdev);
+		ret = at91_ts_register(idev, pdev);
 		if (ret)
 			goto error_disable_adc_clk;
 
-		at91_ts_hw_init(st, adc_clk_khz);
+		at91_ts_hw_init(idev, adc_clk_khz);
 	}
 
 	ret = iio_device_register(idev);
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-05-25 10:25 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-25 10:25 Alexandru Ardelean [this message]
2020-05-25 10:25 ` [PATCH] iio: at91_adc: remove usage of iio_priv_to_dev() helper Alexandru Ardelean
2020-05-31 14:42 ` Jonathan Cameron
2020-05-31 14:42   ` Jonathan Cameron
2020-06-19  8:02   ` Ardelean, Alexandru
2020-06-19  8:02     ` Ardelean, Alexandru
2020-06-20 16:28     ` Jonathan Cameron
2020-06-20 16:28       ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200525102513.130664-1-alexandru.ardelean@analog.com \
    --to=alexandru.ardelean@analog.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=jic23@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.