All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Valentin Longchamp <valentin@longchamp.me>,
	Matteo Ghidoni <matteo.ghidoni@ch.abb.com>,
	"David S . Miller" <davem@davemloft.net>,
	Sasha Levin <sashal@kernel.org>,
	netdev@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH AUTOSEL 4.4 4/7] net/ethernet/freescale: rework quiesce/activate for ucc_geth
Date: Thu, 28 May 2020 07:58:08 -0400	[thread overview]
Message-ID: <20200528115811.1406810-4-sashal@kernel.org> (raw)
In-Reply-To: <20200528115811.1406810-1-sashal@kernel.org>

From: Valentin Longchamp <valentin@longchamp.me>

[ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ]

ugeth_quiesce/activate are used to halt the controller when there is a
link change that requires to reconfigure the mac.

The previous implementation called netif_device_detach(). This however
causes the initial activation of the netdevice to fail precisely because
it's detached. For details, see [1].

A possible workaround was the revert of commit
net: linkwatch: add check for netdevice being present to linkwatch_do_dev
However, the check introduced in the above commit is correct and shall be
kept.

The netif_device_detach() is thus replaced with
netif_tx_stop_all_queues() that prevents any tranmission. This allows to
perform mac config change required by the link change, without detaching
the corresponding netdevice and thus not preventing its initial
activation.

[1] https://lists.openwall.net/netdev/2020/01/08/201

Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Acked-by: Matteo Ghidoni <matteo.ghidoni@ch.abb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/ucc_geth.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 55ac00055977..96a1f62cc148 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -45,6 +45,7 @@
 #include <asm/ucc.h>
 #include <asm/ucc_fast.h>
 #include <asm/machdep.h>
+#include <net/sch_generic.h>
 
 #include "ucc_geth.h"
 
@@ -1551,11 +1552,8 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
 
 static void ugeth_quiesce(struct ucc_geth_private *ugeth)
 {
-	/* Prevent any further xmits, plus detach the device. */
-	netif_device_detach(ugeth->ndev);
-
-	/* Wait for any current xmits to finish. */
-	netif_tx_disable(ugeth->ndev);
+	/* Prevent any further xmits */
+	netif_tx_stop_all_queues(ugeth->ndev);
 
 	/* Disable the interrupt to avoid NAPI rescheduling. */
 	disable_irq(ugeth->ug_info->uf_info.irq);
@@ -1568,7 +1566,10 @@ static void ugeth_activate(struct ucc_geth_private *ugeth)
 {
 	napi_enable(&ugeth->napi);
 	enable_irq(ugeth->ug_info->uf_info.irq);
-	netif_device_attach(ugeth->ndev);
+
+	/* allow to xmit again  */
+	netif_tx_wake_all_queues(ugeth->ndev);
+	__netdev_watchdog_up(ugeth->ndev);
 }
 
 /* Called every time the controller might need to be made
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Matteo Ghidoni <matteo.ghidoni@ch.abb.com>,
	Sasha Levin <sashal@kernel.org>,
	netdev@vger.kernel.org,
	Valentin Longchamp <valentin@longchamp.me>,
	linuxppc-dev@lists.ozlabs.org,
	"David S . Miller" <davem@davemloft.net>
Subject: [PATCH AUTOSEL 4.4 4/7] net/ethernet/freescale: rework quiesce/activate for ucc_geth
Date: Thu, 28 May 2020 07:58:08 -0400	[thread overview]
Message-ID: <20200528115811.1406810-4-sashal@kernel.org> (raw)
In-Reply-To: <20200528115811.1406810-1-sashal@kernel.org>

From: Valentin Longchamp <valentin@longchamp.me>

[ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ]

ugeth_quiesce/activate are used to halt the controller when there is a
link change that requires to reconfigure the mac.

The previous implementation called netif_device_detach(). This however
causes the initial activation of the netdevice to fail precisely because
it's detached. For details, see [1].

A possible workaround was the revert of commit
net: linkwatch: add check for netdevice being present to linkwatch_do_dev
However, the check introduced in the above commit is correct and shall be
kept.

The netif_device_detach() is thus replaced with
netif_tx_stop_all_queues() that prevents any tranmission. This allows to
perform mac config change required by the link change, without detaching
the corresponding netdevice and thus not preventing its initial
activation.

[1] https://lists.openwall.net/netdev/2020/01/08/201

Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Acked-by: Matteo Ghidoni <matteo.ghidoni@ch.abb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/ucc_geth.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 55ac00055977..96a1f62cc148 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -45,6 +45,7 @@
 #include <asm/ucc.h>
 #include <asm/ucc_fast.h>
 #include <asm/machdep.h>
+#include <net/sch_generic.h>
 
 #include "ucc_geth.h"
 
@@ -1551,11 +1552,8 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
 
 static void ugeth_quiesce(struct ucc_geth_private *ugeth)
 {
-	/* Prevent any further xmits, plus detach the device. */
-	netif_device_detach(ugeth->ndev);
-
-	/* Wait for any current xmits to finish. */
-	netif_tx_disable(ugeth->ndev);
+	/* Prevent any further xmits */
+	netif_tx_stop_all_queues(ugeth->ndev);
 
 	/* Disable the interrupt to avoid NAPI rescheduling. */
 	disable_irq(ugeth->ug_info->uf_info.irq);
@@ -1568,7 +1566,10 @@ static void ugeth_activate(struct ucc_geth_private *ugeth)
 {
 	napi_enable(&ugeth->napi);
 	enable_irq(ugeth->ug_info->uf_info.irq);
-	netif_device_attach(ugeth->ndev);
+
+	/* allow to xmit again  */
+	netif_tx_wake_all_queues(ugeth->ndev);
+	__netdev_watchdog_up(ugeth->ndev);
 }
 
 /* Called every time the controller might need to be made
-- 
2.25.1


  parent reply	other threads:[~2020-05-28 11:58 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-28 11:58 [PATCH AUTOSEL 4.4 1/7] ARC: Fix ICCM & DCCM runtime size checks Sasha Levin
2020-05-28 11:58 ` Sasha Levin
2020-05-28 11:58 ` [PATCH AUTOSEL 4.4 2/7] x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables Sasha Levin
2020-05-28 11:58 ` [PATCH AUTOSEL 4.4 3/7] net: bmac: Fix read of MAC address from ROM Sasha Levin
2020-05-28 11:58 ` Sasha Levin [this message]
2020-05-28 11:58   ` [PATCH AUTOSEL 4.4 4/7] net/ethernet/freescale: rework quiesce/activate for ucc_geth Sasha Levin
2020-05-28 11:58 ` [PATCH AUTOSEL 4.4 5/7] net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x Sasha Levin
2020-05-28 11:58 ` [PATCH AUTOSEL 4.4 6/7] net: sun: fix missing release regions in cas_init_one() Sasha Levin
2020-05-28 11:58 ` [PATCH AUTOSEL 4.4 7/7] net/mlx4_core: fix a memory leak bug Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200528115811.1406810-4-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=matteo.ghidoni@ch.abb.com \
    --cc=netdev@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=valentin@longchamp.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.