From: Maxime Chevallier <maxime.chevallier@bootlin.com> To: Mauro Carvalho Chehab <mchehab@kernel.org>, Robin Murphy <robin.murphy@arm.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Heiko Stuebner <heiko@sntech.de>, Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxime Chevallier <maxime.chevallier@bootlin.com>, linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Miquel Raynal <miquel.raynal@bootlin.com>, Paul Kocialkowski <paul.kocialkowski@bootlin.com> Subject: [PATCH v2 3/3] arm64: dts: rockchip: Add the camera interface description of the PX30 Date: Fri, 29 May 2020 15:04:05 +0200 [thread overview] Message-ID: <20200529130405.929429-4-maxime.chevallier@bootlin.com> (raw) In-Reply-To: <20200529130405.929429-1-maxime.chevallier@bootlin.com> The PX30 has a camera interface, supporting CSI2, BT656 and Parallel modes. Add a DT description for this interface. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- Changes since V1: - Updated the clock and reset names - Reordered the properties to have clocks and resets bundled together arch/arm64/boot/dts/rockchip/px30.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 9f84aaaf3fba..d895541b7216 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -1140,6 +1140,18 @@ vopl_mmu: iommu@ff470f00 { status = "disabled"; }; + cif: cif@ff490000 { + compatible = "rockchip,px30-cif"; + reg = <0x0 0xff490000 0x0 0x200>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_CIF>, <&cru HCLK_CIF>, <&cru PCLK_CIF>, <&cru SCLK_CIF_OUT>; + clock-names = "aclk", "hclk", "pclkin"; + power-domains = <&power PX30_PD_VI>; + resets = <&cru SRST_CIF_A>, <&cru SRST_CIF_H>, <&cru SRST_CIF_PCLKIN>; + reset-names = "axi", "ahb", "pclkin"; + status = "disabled"; + }; + qos_gmac: qos@ff518000 { compatible = "syscon"; reg = <0x0 0xff518000 0x0 0x20>; -- 2.25.4
WARNING: multiple messages have this Message-ID (diff)
From: Maxime Chevallier <maxime.chevallier@bootlin.com> To: Mauro Carvalho Chehab <mchehab@kernel.org>, Robin Murphy <robin.murphy@arm.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Heiko Stuebner <heiko@sntech.de>, Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Maxime Chevallier <maxime.chevallier@bootlin.com>, Paul Kocialkowski <paul.kocialkowski@bootlin.com>, linux-rockchip@lists.infradead.org, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Miquel Raynal <miquel.raynal@bootlin.com>, linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org Subject: [PATCH v2 3/3] arm64: dts: rockchip: Add the camera interface description of the PX30 Date: Fri, 29 May 2020 15:04:05 +0200 [thread overview] Message-ID: <20200529130405.929429-4-maxime.chevallier@bootlin.com> (raw) In-Reply-To: <20200529130405.929429-1-maxime.chevallier@bootlin.com> The PX30 has a camera interface, supporting CSI2, BT656 and Parallel modes. Add a DT description for this interface. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- Changes since V1: - Updated the clock and reset names - Reordered the properties to have clocks and resets bundled together arch/arm64/boot/dts/rockchip/px30.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 9f84aaaf3fba..d895541b7216 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -1140,6 +1140,18 @@ vopl_mmu: iommu@ff470f00 { status = "disabled"; }; + cif: cif@ff490000 { + compatible = "rockchip,px30-cif"; + reg = <0x0 0xff490000 0x0 0x200>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_CIF>, <&cru HCLK_CIF>, <&cru PCLK_CIF>, <&cru SCLK_CIF_OUT>; + clock-names = "aclk", "hclk", "pclkin"; + power-domains = <&power PX30_PD_VI>; + resets = <&cru SRST_CIF_A>, <&cru SRST_CIF_H>, <&cru SRST_CIF_PCLKIN>; + reset-names = "axi", "ahb", "pclkin"; + status = "disabled"; + }; + qos_gmac: qos@ff518000 { compatible = "syscon"; reg = <0x0 0xff518000 0x0 0x20>; -- 2.25.4 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-29 13:04 UTC|newest] Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-29 13:04 [PATCH v2 0/3] media: rockchip: Introduce driver for the camera interface on PX30 Maxime Chevallier 2020-05-29 13:04 ` Maxime Chevallier 2020-05-29 13:04 ` Maxime Chevallier 2020-05-29 13:04 ` [PATCH v2 1/3] media: dt-bindings: media: Document Rockchip CIF bindings Maxime Chevallier 2020-05-29 13:04 ` Maxime Chevallier 2020-05-29 16:14 ` Rob Herring 2020-05-29 16:14 ` Rob Herring 2020-05-29 16:14 ` Rob Herring 2020-05-29 13:04 ` [PATCH v2 2/3] media: rockchip: Introduce driver for Rockhip's camera interface Maxime Chevallier 2020-05-29 13:04 ` Maxime Chevallier 2020-05-31 4:39 ` kbuild test robot 2020-05-31 4:39 ` kbuild test robot 2020-05-31 4:39 ` kbuild test robot 2020-05-31 12:16 ` kbuild test robot 2020-05-31 12:16 ` kbuild test robot 2020-05-31 13:40 ` Ezequiel Garcia 2020-05-31 13:40 ` Ezequiel Garcia 2020-07-09 7:35 ` Maxime Chevallier 2020-07-09 7:35 ` Maxime Chevallier 2020-07-09 7:35 ` Maxime Chevallier 2020-07-09 18:06 ` Dafna Hirschfeld 2020-07-09 18:06 ` Dafna Hirschfeld 2020-07-09 18:06 ` Dafna Hirschfeld 2020-05-29 13:04 ` Maxime Chevallier [this message] 2020-05-29 13:04 ` [PATCH v2 3/3] arm64: dts: rockchip: Add the camera interface description of the PX30 Maxime Chevallier 2020-06-01 18:45 ` [PATCH v2 0/3] media: rockchip: Introduce driver for the camera interface on PX30 Tomasz Figa 2020-06-01 18:45 ` Tomasz Figa 2020-06-01 21:38 ` Heiko Stübner 2020-06-04 17:04 ` Tomasz Figa
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200529130405.929429-4-maxime.chevallier@bootlin.com \ --to=maxime.chevallier@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=hverkuil-cisco@xs4all.nl \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mark.rutland@arm.com \ --cc=mchehab@kernel.org \ --cc=miquel.raynal@bootlin.com \ --cc=paul.kocialkowski@bootlin.com \ --cc=robh+dt@kernel.org \ --cc=robin.murphy@arm.com \ --cc=thomas.petazzoni@bootlin.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.