[net-next 00/14][pull request] 100GbE Intel Wired LAN Driver Updates 2020-05-31

[net-next 00/14][pull request] 100GbE Intel Wired LAN Driver Updates 2020-05-31

[Jeff Kirsher]

This series contains updates to the ice driver only.

Brett modifies the driver to allow users to clear a VF's
administratively set MAC address on the PF.  Fixes the driver to
recognize an existing VLAN tag when DMAC/SMAC is enabled in a packet.
Fixes an issue, so that VF's are reset after any VF port VLAN
modifications are made on the PF.  Made sure the register QRXFLXP_CNTXT
is cleared before writing a new value to ensure the previous value is
not passed forward.  Updates the PF to allow the VF to request a reset
as soon as it has been initialized.  Fixes an issue to ensure when a VSI
is created, it uses the current coalesce value, not the default value.

Paul allows untrusted VF's to add 16 filters.

Dan increases the timeout needed after a PFR to allow ample time for
package download.

Chinh adjust the define value for the number of PHY speeds we currently
support.  Changes the driver to ignore EMODE error when configuring the
PHY.

Jesse fixes an issue which was preventing a user from configuring the
interface before bringing it up.

Henry fixes the logic for adding back perfect flows after flow director
filter does a deletion.

Bruce fixes line wrappings to make it more consistent.

The following are changes since commit 39884604b11692158ce0c559fc603510b96f8c2e:
  mptcp: fix NULL ptr dereference in MP_JOIN error path
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 100GbE

Brett Creeley (6):
  ice: allow host to clear administratively set VF MAC
  ice: Fix transmit for all software offloaded VLANs
  ice: Reset VF for all port VLAN changes from host
  ice: Always clear QRXFLXP_CNTXT before writing new value
  ice: Allow VF to request reset as soon as it's initialized
  ice: Use coalesce values from q_vector 0 when increasing q_vectors

Bruce Allan (1):
  ice: fix function signature style format

Chinh T Cao (2):
  ice: Update ICE_PHY_TYPE_HIGH_MAX_INDEX value
  ice: Ignore EMODE when setting PHY config

Dan Nowlin (1):
  ice: Increase timeout after PFR

Henry Tieman (1):
  ice: fix aRFS after flow director delete

Jesse Brandeburg (1):
  ice: Fix inability to set channels when down

Paul Greenwalt (1):
  ice: support adding 16 unicast/multicast filter on untrusted VF

Paul M Stillwell Jr (1):
  ice: fix PCI device serial number to be lowercase values

 .../net/ethernet/intel/ice/ice_adminq_cmd.h   |  3 +-
 drivers/net/ethernet/intel/ice/ice_base.c     | 33 ++++------
 drivers/net/ethernet/intel/ice/ice_common.c   | 14 +++-
 drivers/net/ethernet/intel/ice/ice_controlq.c |  3 +-
 drivers/net/ethernet/intel/ice/ice_dcb_lib.c  | 28 +++-----
 drivers/net/ethernet/intel/ice/ice_dcb_lib.h  |  2 +-
 drivers/net/ethernet/intel/ice/ice_ethtool.c  |  4 --
 .../net/ethernet/intel/ice/ice_ethtool_fdir.c | 27 +++++++-
 drivers/net/ethernet/intel/ice/ice_lib.c      | 40 ++++++++---
 drivers/net/ethernet/intel/ice/ice_lib.h      |  3 +
 drivers/net/ethernet/intel/ice/ice_main.c     |  4 +-
 drivers/net/ethernet/intel/ice/ice_sched.c    | 12 ++--
 drivers/net/ethernet/intel/ice/ice_switch.c   |  9 +--
 drivers/net/ethernet/intel/ice/ice_txrx.c     | 45 +++----------
 .../net/ethernet/intel/ice/ice_virtchnl_pf.c  | 66 ++++++-------------
 .../net/ethernet/intel/ice/ice_virtchnl_pf.h  |  5 +-
 16 files changed, 142 insertions(+), 156 deletions(-)

-- 
2.26.2

[net-next 01/14] ice: allow host to clear administratively set VF MAC

[Jeff Kirsher]

From: Brett Creeley <brett.creeley@intel.com>

Currently a user is not allowed to clear a VF's administratively set MAC
on the PF. Fix this by allowing an all zero MAC address via "ip link set
${pf_eth} vf ${vf_id} mac 00:00:00:00:00:00".

An example use case for this would be issuing a "virsh shutdown"
command on a VM. The call to iproute mentioned above is part of this flow.
Without this change the driver incorrectly rejects clearing the VF's
administratively set MAC and prints unhelpful log messages.

Also, improve the comments surrounding this change.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 .../net/ethernet/intel/ice/ice_virtchnl_pf.c  | 22 ++++++++++++-------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index a126e7c7663d..9550501f9279 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -3904,7 +3904,7 @@ int ice_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 	if (ice_validate_vf_id(pf, vf_id))
 		return -EINVAL;
 
-	if (is_zero_ether_addr(mac) || is_multicast_ether_addr(mac)) {
+	if (is_multicast_ether_addr(mac)) {
 		netdev_err(netdev, "%pM not a valid unicast address\n", mac);
 		return -EINVAL;
 	}
@@ -3924,15 +3924,21 @@ int ice_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
 		return -EINVAL;
 	}
 
-	/* copy MAC into dflt_lan_addr and trigger a VF reset. The reset
-	 * flow will use the updated dflt_lan_addr and add a MAC filter
-	 * using ice_add_mac. Also set pf_set_mac to indicate that the PF has
-	 * set the MAC address for this VF.
+	/* VF is notified of its new MAC via the PF's response to the
+	 * VIRTCHNL_OP_GET_VF_RESOURCES message after the VF has been reset
 	 */
 	ether_addr_copy(vf->dflt_lan_addr.addr, mac);
-	vf->pf_set_mac = true;
-	netdev_info(netdev, "MAC on VF %d set to %pM. VF driver will be reinitialized\n",
-		    vf_id, mac);
+	if (is_zero_ether_addr(mac)) {
+		/* VF will send VIRTCHNL_OP_ADD_ETH_ADDR message with its MAC */
+		vf->pf_set_mac = false;
+		netdev_info(netdev, "Removing MAC on VF %d. VF driver will be reinitialized\n",
+			    vf->vf_id);
+	} else {
+		/* PF will add MAC rule for the VF */
+		vf->pf_set_mac = true;
+		netdev_info(netdev, "Setting MAC %pM on VF %d. VF driver will be reinitialized\n",
+			    mac, vf_id);
+	}
 
 	ice_vc_reset_vf(vf);
 	return 0;
-- 
2.26.2

[net-next 02/14] ice: support adding 16 unicast/multicast filter on untrusted VF

[Jeff Kirsher]

From: Paul Greenwalt <paul.greenwalt@intel.com>

Allow untrusted VF to add 16 unicast/multicast filters. VF uses 1 filter
for the default/perm_addr/LAA MAC, 1 for broadcast, and 16 additional
unicast/multicast filters.

Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
index 0adff89a6749..67aa9110fdd1 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
@@ -7,7 +7,10 @@
 
 /* Restrict number of MAC Addr and VLAN that non-trusted VF can programmed */
 #define ICE_MAX_VLAN_PER_VF		8
-#define ICE_MAX_MACADDR_PER_VF		12
+/* MAC filters: 1 is reserved for the VF's default/perm_addr/LAA MAC, 1 for
+ * broadcast, and 16 for additional unicast/multicast filters
+ */
+#define ICE_MAX_MACADDR_PER_VF		18
 
 /* Malicious Driver Detection */
 #define ICE_DFLT_NUM_INVAL_MSGS_ALLOWED		10
-- 
2.26.2

[net-next 03/14] ice: Fix transmit for all software offloaded VLANs

[Jeff Kirsher]

From: Brett Creeley <brett.creeley@intel.com>

Currently the driver does not recognize when there is an 802.1AD VLAN
tag right after the dmac/smac (outermost VLAN tag). If any DCB map is
applied and/or DCB is enabled this is causing the hardware to insert a
VLAN 0 tag after the 802.1AD VLAN tag that is already in the packet.
Fix this by preventing VLAN tag 0 from being added when any VLAN is
already present after dmac/smac (software offloaded) or skb (hardware
offloaded).

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_dcb_lib.c | 28 +++++-------
 drivers/net/ethernet/intel/ice/ice_dcb_lib.h |  2 +-
 drivers/net/ethernet/intel/ice/ice_txrx.c    | 45 +++++---------------
 3 files changed, 21 insertions(+), 54 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
index 3c7f604c0c49..979af197f8a3 100644
--- a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
@@ -791,39 +791,31 @@ void ice_update_dcb_stats(struct ice_pf *pf)
  * ice_tx_prepare_vlan_flags_dcb - prepare VLAN tagging for DCB
  * @tx_ring: ring to send buffer on
  * @first: pointer to struct ice_tx_buf
+ *
+ * This should not be called if the outer VLAN is software offloaded as the VLAN
+ * tag will already be configured with the correct ID and priority bits
  */
-int
+void
 ice_tx_prepare_vlan_flags_dcb(struct ice_ring *tx_ring,
 			      struct ice_tx_buf *first)
 {
 	struct sk_buff *skb = first->skb;
 
 	if (!test_bit(ICE_FLAG_DCB_ENA, tx_ring->vsi->back->flags))
-		return 0;
+		return;
 
 	/* Insert 802.1p priority into VLAN header */
-	if ((first->tx_flags & (ICE_TX_FLAGS_HW_VLAN | ICE_TX_FLAGS_SW_VLAN)) ||
+	if ((first->tx_flags & ICE_TX_FLAGS_HW_VLAN) ||
 	    skb->priority != TC_PRIO_CONTROL) {
 		first->tx_flags &= ~ICE_TX_FLAGS_VLAN_PR_M;
 		/* Mask the lower 3 bits to set the 802.1p priority */
 		first->tx_flags |= (skb->priority & 0x7) <<
 				   ICE_TX_FLAGS_VLAN_PR_S;
-		if (first->tx_flags & ICE_TX_FLAGS_SW_VLAN) {
-			struct vlan_ethhdr *vhdr;
-			int rc;
-
-			rc = skb_cow_head(skb, 0);
-			if (rc < 0)
-				return rc;
-			vhdr = (struct vlan_ethhdr *)skb->data;
-			vhdr->h_vlan_TCI = htons(first->tx_flags >>
-						 ICE_TX_FLAGS_VLAN_S);
-		} else {
-			first->tx_flags |= ICE_TX_FLAGS_HW_VLAN;
-		}
+		/* if this is not already set it means a VLAN 0 + priority needs
+		 * to be offloaded
+		 */
+		first->tx_flags |= ICE_TX_FLAGS_HW_VLAN;
 	}
-
-	return 0;
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_lib.h b/drivers/net/ethernet/intel/ice/ice_dcb_lib.h
index 7c42324494d2..323238669572 100644
--- a/drivers/net/ethernet/intel/ice/ice_dcb_lib.h
+++ b/drivers/net/ethernet/intel/ice/ice_dcb_lib.h
@@ -27,7 +27,7 @@ void ice_pf_dcb_recfg(struct ice_pf *pf);
 void ice_vsi_cfg_dcb_rings(struct ice_vsi *vsi);
 int ice_init_pf_dcb(struct ice_pf *pf, bool locked);
 void ice_update_dcb_stats(struct ice_pf *pf);
-int
+void
 ice_tx_prepare_vlan_flags_dcb(struct ice_ring *tx_ring,
 			      struct ice_tx_buf *first);
 void
diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index cda7e05bd8ae..abdb137c8bb7 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -2053,49 +2053,25 @@ int ice_tx_csum(struct ice_tx_buf *first, struct ice_tx_offload_params *off)
  *
  * Checks the skb and set up correspondingly several generic transmit flags
  * related to VLAN tagging for the HW, such as VLAN, DCB, etc.
- *
- * Returns error code indicate the frame should be dropped upon error and the
- * otherwise returns 0 to indicate the flags has been set properly.
  */
-static int
+static void
 ice_tx_prepare_vlan_flags(struct ice_ring *tx_ring, struct ice_tx_buf *first)
 {
 	struct sk_buff *skb = first->skb;
-	__be16 protocol = skb->protocol;
-
-	if (protocol == htons(ETH_P_8021Q) &&
-	    !(tx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_TX)) {
-		/* when HW VLAN acceleration is turned off by the user the
-		 * stack sets the protocol to 8021q so that the driver
-		 * can take any steps required to support the SW only
-		 * VLAN handling. In our case the driver doesn't need
-		 * to take any further steps so just set the protocol
-		 * to the encapsulated ethertype.
-		 */
-		skb->protocol = vlan_get_protocol(skb);
-		return 0;
-	}
 
-	/* if we have a HW VLAN tag being added, default to the HW one */
+	/* nothing left to do, software offloaded VLAN */
+	if (!skb_vlan_tag_present(skb) && eth_type_vlan(skb->protocol))
+		return;
+
+	/* currently, we always assume 802.1Q for VLAN insertion as VLAN
+	 * insertion for 802.1AD is not supported
+	 */
 	if (skb_vlan_tag_present(skb)) {
 		first->tx_flags |= skb_vlan_tag_get(skb) << ICE_TX_FLAGS_VLAN_S;
 		first->tx_flags |= ICE_TX_FLAGS_HW_VLAN;
-	} else if (protocol == htons(ETH_P_8021Q)) {
-		struct vlan_hdr *vhdr, _vhdr;
-
-		/* for SW VLAN, check the next protocol and store the tag */
-		vhdr = (struct vlan_hdr *)skb_header_pointer(skb, ETH_HLEN,
-							     sizeof(_vhdr),
-							     &_vhdr);
-		if (!vhdr)
-			return -EINVAL;
-
-		first->tx_flags |= ntohs(vhdr->h_vlan_TCI) <<
-				   ICE_TX_FLAGS_VLAN_S;
-		first->tx_flags |= ICE_TX_FLAGS_SW_VLAN;
 	}
 
-	return ice_tx_prepare_vlan_flags_dcb(tx_ring, first);
+	ice_tx_prepare_vlan_flags_dcb(tx_ring, first);
 }
 
 /**
@@ -2403,8 +2379,7 @@ ice_xmit_frame_ring(struct sk_buff *skb, struct ice_ring *tx_ring)
 	first->tx_flags = 0;
 
 	/* prepare the VLAN tagging flags for Tx */
-	if (ice_tx_prepare_vlan_flags(tx_ring, first))
-		goto out_drop;
+	ice_tx_prepare_vlan_flags(tx_ring, first);
 
 	/* set up TSO offload */
 	tso = ice_tso(first, &offload);
-- 
2.26.2

[net-next 04/14] ice: Increase timeout after PFR

[Jeff Kirsher]

From: Dan Nowlin <dan.nowlin@intel.com>

To allow for resets during package download, increase the timeout period
after performing a PFR. The time waited is the global config lock
timeout plus the normal PFSWR timeout.

Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_common.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 8c73e161829d..d4a31c734326 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -964,7 +964,12 @@ static enum ice_status ice_pf_reset(struct ice_hw *hw)
 
 	wr32(hw, PFGEN_CTRL, (reg | PFGEN_CTRL_PFSWR_M));
 
-	for (cnt = 0; cnt < ICE_PF_RESET_WAIT_COUNT; cnt++) {
+	/* Wait for the PFR to complete. The wait time is the global config lock
+	 * timeout plus the PFR timeout which will account for a possible reset
+	 * that is occurring during a download package operation.
+	 */
+	for (cnt = 0; cnt < ICE_GLOBAL_CFG_LOCK_TIMEOUT +
+	     ICE_PF_RESET_WAIT_COUNT; cnt++) {
 		reg = rd32(hw, PFGEN_CTRL);
 		if (!(reg & PFGEN_CTRL_PFSWR_M))
 			break;
-- 
2.26.2

[net-next 05/14] ice: Update ICE_PHY_TYPE_HIGH_MAX_INDEX value

[Jeff Kirsher]

From: Chinh T Cao <chinh.t.cao@intel.com>

As currently, we are supporting only 5 PHY_SPEEDs for phy_type_high.
Thus, we should adjust the value of ICE_PHY_TYPE_HIGH_MAX_INDEX to 5.

Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_adminq_cmd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
index f04c338fb6e0..50040c5c55ec 100644
--- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
@@ -974,7 +974,7 @@ struct ice_aqc_get_phy_caps {
 #define ICE_PHY_TYPE_HIGH_100G_CAUI2		BIT_ULL(2)
 #define ICE_PHY_TYPE_HIGH_100G_AUI2_AOC_ACC	BIT_ULL(3)
 #define ICE_PHY_TYPE_HIGH_100G_AUI2		BIT_ULL(4)
-#define ICE_PHY_TYPE_HIGH_MAX_INDEX		19
+#define ICE_PHY_TYPE_HIGH_MAX_INDEX		5
 
 struct ice_aqc_get_phy_caps_data {
 	__le64 phy_type_low; /* Use values from ICE_PHY_TYPE_LOW_* */
-- 
2.26.2

[net-next 06/14] ice: Reset VF for all port VLAN changes from host

[Jeff Kirsher]

From: Brett Creeley <brett.creeley@intel.com>

Currently the PF is modifying the VF's port VLAN on the fly when
configured via iproute. This is okay for most cases, but if the VF
already has guest VLANs configured the PF has to remove all of those
filters so only VLAN tagged traffic that matches the port VLAN will
pass. Instead of adding functionality to track which guest VLANs have
been added, just reset the VF each time port VLAN parameters are
modified.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 .../net/ethernet/intel/ice/ice_virtchnl_pf.c  | 42 +++----------------
 1 file changed, 5 insertions(+), 37 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 9550501f9279..2916cfb9d032 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -3295,7 +3295,6 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 		     __be16 vlan_proto)
 {
 	struct ice_pf *pf = ice_netdev_to_pf(netdev);
-	struct ice_vsi *vsi;
 	struct device *dev;
 	struct ice_vf *vf;
 	u16 vlanprio;
@@ -3317,8 +3316,6 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 	}
 
 	vf = &pf->vf[vf_id];
-	vsi = pf->vsi[vf->lan_vsi_idx];
-
 	ret = ice_check_vf_ready_for_cfg(vf);
 	if (ret)
 		return ret;
@@ -3331,44 +3328,15 @@ ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
 		return 0;
 	}
 
-	if (vlan_id || qos) {
-		/* remove VLAN 0 filter set by default when transitioning from
-		 * no port VLAN to a port VLAN. No change to old port VLAN on
-		 * failure.
-		 */
-		ret = ice_vsi_kill_vlan(vsi, 0);
-		if (ret)
-			return ret;
-		ret = ice_vsi_manage_pvid(vsi, vlanprio, true);
-		if (ret)
-			return ret;
-	} else {
-		/* add VLAN 0 filter back when transitioning from port VLAN to
-		 * no port VLAN. No change to old port VLAN on failure.
-		 */
-		ret = ice_vsi_add_vlan(vsi, 0, ICE_FWD_TO_VSI);
-		if (ret)
-			return ret;
-		ret = ice_vsi_manage_pvid(vsi, 0, false);
-		if (ret)
-			return ret;
-	}
+	vf->port_vlan_info = vlanprio;
 
-	if (vlan_id) {
+	if (vf->port_vlan_info)
 		dev_info(dev, "Setting VLAN %d, QoS 0x%x on VF %d\n",
 			 vlan_id, qos, vf_id);
+	else
+		dev_info(dev, "Clearing port VLAN on VF %d\n", vf_id);
 
-		/* add VLAN filter for the port VLAN */
-		ret = ice_vsi_add_vlan(vsi, vlan_id, ICE_FWD_TO_VSI);
-		if (ret)
-			return ret;
-	}
-	/* remove old port VLAN filter with valid VLAN ID or QoS fields */
-	if (vf->port_vlan_info)
-		ice_vsi_kill_vlan(vsi, vf->port_vlan_info & VLAN_VID_MASK);
-
-	/* keep port VLAN information persistent on resets */
-	vf->port_vlan_info = le16_to_cpu(vsi->info.pvid);
+	ice_vc_reset_vf(vf);
 
 	return 0;
 }
-- 
2.26.2

[net-next 07/14] ice: Always clear QRXFLXP_CNTXT before writing new value

[Jeff Kirsher]

From: Brett Creeley <brett.creeley@intel.com>

Always clear the previous value in QRXFLXP_CNTXT before writing a new
value. This will make it so re-used queues will not accidentally take the
previously configured settings.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_base.c | 33 ++++++++---------------
 drivers/net/ethernet/intel/ice/ice_lib.c  | 26 ++++++++++++++++++
 drivers/net/ethernet/intel/ice/ice_lib.h  |  3 +++
 3 files changed, 40 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_base.c b/drivers/net/ethernet/intel/ice/ice_base.c
index a174911d8994..d620d26d42ed 100644
--- a/drivers/net/ethernet/intel/ice/ice_base.c
+++ b/drivers/net/ethernet/intel/ice/ice_base.c
@@ -3,6 +3,7 @@
 
 #include <net/xdp_sock_drv.h>
 #include "ice_base.h"
+#include "ice_lib.h"
 #include "ice_dcb_lib.h"
 
 /**
@@ -288,7 +289,6 @@ int ice_setup_rx_ctx(struct ice_ring *ring)
 	u32 rxdid = ICE_RXDID_FLEX_NIC;
 	struct ice_rlan_ctx rlan_ctx;
 	struct ice_hw *hw;
-	u32 regval;
 	u16 pf_q;
 	int err;
 
@@ -385,27 +385,16 @@ int ice_setup_rx_ctx(struct ice_ring *ring)
 	/* Rx queue threshold in units of 64 */
 	rlan_ctx.lrxqthresh = 1;
 
-	 /* Enable Flexible Descriptors in the queue context which
-	  * allows this driver to select a specific receive descriptor format
-	  */
-	regval = rd32(hw, QRXFLXP_CNTXT(pf_q));
-	if (vsi->type != ICE_VSI_VF) {
-		regval |= (rxdid << QRXFLXP_CNTXT_RXDID_IDX_S) &
-			QRXFLXP_CNTXT_RXDID_IDX_M;
-
-		/* increasing context priority to pick up profile ID;
-		 * default is 0x01; setting to 0x03 to ensure profile
-		 * is programming if prev context is of same priority
-		 */
-		regval |= (0x03 << QRXFLXP_CNTXT_RXDID_PRIO_S) &
-			QRXFLXP_CNTXT_RXDID_PRIO_M;
-
-	} else {
-		regval &= ~(QRXFLXP_CNTXT_RXDID_IDX_M |
-			    QRXFLXP_CNTXT_RXDID_PRIO_M |
-			    QRXFLXP_CNTXT_TS_M);
-	}
-	wr32(hw, QRXFLXP_CNTXT(pf_q), regval);
+	/* Enable Flexible Descriptors in the queue context which
+	 * allows this driver to select a specific receive descriptor format
+	 * increasing context priority to pick up profile ID; default is 0x01;
+	 * setting to 0x03 to ensure profile is programming if prev context is
+	 * of same priority
+	 */
+	if (vsi->type != ICE_VSI_VF)
+		ice_write_qrxflxp_cntxt(hw, pf_q, rxdid, 0x3);
+	else
+		ice_write_qrxflxp_cntxt(hw, pf_q, ICE_RXDID_LEGACY_1, 0x3);
 
 	/* Absolute queue number out of 2K needs to be passed */
 	err = ice_write_rxq_ctx(hw, &rlan_ctx, pf_q);
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 89e8e4f7f56f..ecc04a696e50 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -1595,6 +1595,32 @@ void ice_vsi_cfg_frame_size(struct ice_vsi *vsi)
 	}
 }
 
+/**
+ * ice_write_qrxflxp_cntxt - write/configure QRXFLXP_CNTXT register
+ * @hw: HW pointer
+ * @pf_q: index of the Rx queue in the PF's queue space
+ * @rxdid: flexible descriptor RXDID
+ * @prio: priority for the RXDID for this queue
+ */
+void
+ice_write_qrxflxp_cntxt(struct ice_hw *hw, u16 pf_q, u32 rxdid, u32 prio)
+{
+	int regval = rd32(hw, QRXFLXP_CNTXT(pf_q));
+
+	/* clear any previous values */
+	regval &= ~(QRXFLXP_CNTXT_RXDID_IDX_M |
+		    QRXFLXP_CNTXT_RXDID_PRIO_M |
+		    QRXFLXP_CNTXT_TS_M);
+
+	regval |= (rxdid << QRXFLXP_CNTXT_RXDID_IDX_S) &
+		QRXFLXP_CNTXT_RXDID_IDX_M;
+
+	regval |= (prio << QRXFLXP_CNTXT_RXDID_PRIO_S) &
+		QRXFLXP_CNTXT_RXDID_PRIO_M;
+
+	wr32(hw, QRXFLXP_CNTXT(pf_q), regval);
+}
+
 /**
  * ice_vsi_cfg_rxqs - Configure the VSI for Rx
  * @vsi: the VSI being configured
diff --git a/drivers/net/ethernet/intel/ice/ice_lib.h b/drivers/net/ethernet/intel/ice/ice_lib.h
index 076e635e0c9f..d80e6afa4511 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.h
+++ b/drivers/net/ethernet/intel/ice/ice_lib.h
@@ -74,6 +74,9 @@ int ice_vsi_rebuild(struct ice_vsi *vsi, bool init_vsi);
 
 bool ice_is_reset_in_progress(unsigned long *state);
 
+void
+ice_write_qrxflxp_cntxt(struct ice_hw *hw, u16 pf_q, u32 rxdid, u32 prio);
+
 void ice_vsi_put_qs(struct ice_vsi *vsi);
 
 void ice_vsi_dis_irq(struct ice_vsi *vsi);
-- 
2.26.2

[net-next 08/14] ice: Fix inability to set channels when down

[Jeff Kirsher]

From: Jesse Brandeburg <jesse.brandeburg@intel.com>

Currently the driver prevents a user from doing
modprobe ice
ethtool -L eth0 combined 5
ip link set eth0 up

The ethtool command fails, because the driver is checking to see if the
interface is down before allowing the get_channels to proceed (even for
a set_channels).

Remove this check and allow the user to configure the interface
before bringing it up, which is a much better usability case.

Fixes: 87324e747fde ("ice: Implement ethtool ops for channels")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_ethtool.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c
index fd1849155d85..68c38004a088 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c
@@ -3189,10 +3189,6 @@ ice_get_channels(struct net_device *dev, struct ethtool_channels *ch)
 	struct ice_vsi *vsi = np->vsi;
 	struct ice_pf *pf = vsi->back;
 
-	/* check to see if VSI is active */
-	if (test_bit(__ICE_DOWN, vsi->state))
-		return;
-
 	/* report maximum channels */
 	ch->max_rx = ice_get_max_rxq(pf);
 	ch->max_tx = ice_get_max_txq(pf);
-- 
2.26.2

[net-next 09/14] ice: Allow VF to request reset as soon as it's initialized

[Jeff Kirsher]

From: Brett Creeley <brett.creeley@intel.com>

A VF driver has the ability to request reset via VIRTCHNL_OP_RESET_VF.
This is a required step in VF driver load. Currently, the PF is only
allowing a VF to request reset using this method after the VF has
already communicated resources via VIRTCHNL_OP_GET_VF_RESOURCES.
However, this is incorrect because the VF can request reset before
requesting resources. Fix this by allowing the VF to request a reset
once it has been initialized.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 2916cfb9d032..16a2f2526ccc 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -2014,7 +2014,7 @@ static int ice_vc_get_vf_res_msg(struct ice_vf *vf, u8 *msg)
  */
 static void ice_vc_reset_vf_msg(struct ice_vf *vf)
 {
-	if (test_bit(ICE_VF_STATE_ACTIVE, vf->vf_states))
+	if (test_bit(ICE_VF_STATE_INIT, vf->vf_states))
 		ice_reset_vf(vf, false);
 }
 
-- 
2.26.2

[net-next 10/14] ice: fix function signature style format

[Jeff Kirsher]

From: Bruce Allan <bruce.w.allan@intel.com>

Where possible, cuddle multiple lines of function signatures to be
consistent throughout the code.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_controlq.c |  3 +--
 drivers/net/ethernet/intel/ice/ice_sched.c    | 12 ++++--------
 drivers/net/ethernet/intel/ice/ice_switch.c   |  9 +++------
 3 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_controlq.c b/drivers/net/ethernet/intel/ice/ice_controlq.c
index 479a74efc536..1e18021aa073 100644
--- a/drivers/net/ethernet/intel/ice/ice_controlq.c
+++ b/drivers/net/ethernet/intel/ice/ice_controlq.c
@@ -769,8 +769,7 @@ enum ice_status ice_create_all_ctrlq(struct ice_hw *hw)
  *
  * Destroys the send and receive queue locks for a given control queue.
  */
-static void
-ice_destroy_ctrlq_locks(struct ice_ctl_q_info *cq)
+static void ice_destroy_ctrlq_locks(struct ice_ctl_q_info *cq)
 {
 	mutex_destroy(&cq->sq_lock);
 	mutex_destroy(&cq->rq_lock);
diff --git a/drivers/net/ethernet/intel/ice/ice_sched.c b/drivers/net/ethernet/intel/ice/ice_sched.c
index d63acd2fcf79..0475134295e4 100644
--- a/drivers/net/ethernet/intel/ice/ice_sched.c
+++ b/drivers/net/ethernet/intel/ice/ice_sched.c
@@ -1714,8 +1714,7 @@ ice_sched_cfg_vsi(struct ice_port_info *pi, u16 vsi_handle, u8 tc, u16 maxqs,
  * This function removes single aggregator VSI info entry from
  * aggregator list.
  */
-static void
-ice_sched_rm_agg_vsi_info(struct ice_port_info *pi, u16 vsi_handle)
+static void ice_sched_rm_agg_vsi_info(struct ice_port_info *pi, u16 vsi_handle)
 {
 	struct ice_sched_agg_info *agg_info;
 	struct ice_sched_agg_info *atmp;
@@ -1947,8 +1946,7 @@ ice_sched_cfg_node_bw_alloc(struct ice_hw *hw, struct ice_sched_node *node,
  *
  * Save or clear CIR bandwidth (BW) in the passed param bw_t_info.
  */
-static void
-ice_set_clear_cir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
+static void ice_set_clear_cir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
 {
 	if (bw == ICE_SCHED_DFLT_BW) {
 		clear_bit(ICE_BW_TYPE_CIR, bw_t_info->bw_t_bitmap);
@@ -1967,8 +1965,7 @@ ice_set_clear_cir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
  *
  * Save or clear EIR bandwidth (BW) in the passed param bw_t_info.
  */
-static void
-ice_set_clear_eir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
+static void ice_set_clear_eir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
 {
 	if (bw == ICE_SCHED_DFLT_BW) {
 		clear_bit(ICE_BW_TYPE_EIR, bw_t_info->bw_t_bitmap);
@@ -1993,8 +1990,7 @@ ice_set_clear_eir_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
  *
  * Save or clear shared bandwidth (BW) in the passed param bw_t_info.
  */
-static void
-ice_set_clear_shared_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
+static void ice_set_clear_shared_bw(struct ice_bw_type_info *bw_t_info, u32 bw)
 {
 	if (bw == ICE_SCHED_DFLT_BW) {
 		clear_bit(ICE_BW_TYPE_SHARED, bw_t_info->bw_t_bitmap);
diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c
index 0156b73df1b1..ff7d16ac693e 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.c
+++ b/drivers/net/ethernet/intel/ice/ice_switch.c
@@ -1612,8 +1612,7 @@ ice_remove_rule_internal(struct ice_hw *hw, u8 recp_id,
  * check for duplicates in this case, removing duplicates from a given
  * list should be taken care of in the caller of this function.
  */
-enum ice_status
-ice_add_mac(struct ice_hw *hw, struct list_head *m_list)
+enum ice_status ice_add_mac(struct ice_hw *hw, struct list_head *m_list)
 {
 	struct ice_aqc_sw_rules_elem *s_rule, *r_iter;
 	struct ice_fltr_list_entry *m_list_itr;
@@ -1914,8 +1913,7 @@ ice_add_vlan_internal(struct ice_hw *hw, struct ice_fltr_list_entry *f_entry)
  * @hw: pointer to the hardware structure
  * @v_list: list of VLAN entries and forwarding information
  */
-enum ice_status
-ice_add_vlan(struct ice_hw *hw, struct list_head *v_list)
+enum ice_status ice_add_vlan(struct ice_hw *hw, struct list_head *v_list)
 {
 	struct ice_fltr_list_entry *v_list_itr;
 
@@ -2145,8 +2143,7 @@ ice_find_ucast_rule_entry(struct ice_hw *hw, u8 recp_id,
  * the entries passed into m_list were added previously. It will not attempt to
  * do a partial remove of entries that were found.
  */
-enum ice_status
-ice_remove_mac(struct ice_hw *hw, struct list_head *m_list)
+enum ice_status ice_remove_mac(struct ice_hw *hw, struct list_head *m_list)
 {
 	struct ice_fltr_list_entry *list_itr, *tmp;
 	struct mutex *rule_lock; /* Lock to protect filter rule list */
-- 
2.26.2

[net-next 11/14] ice: fix PCI device serial number to be lowercase values

[Jeff Kirsher]

From: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>

Commit ceb2f00707f9 ("ice: Use pci_get_dsn()") changed the code to
use a new function to get the Device Serial Number. It also changed
the case of the filename for loading a package on a specific NIC
from lowercase to uppercase. Change the filename back to
lowercase since that is what we specified.

Fixes: ceb2f00707f9 ("ice: Use pci_get_dsn()")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index bbf92d2f1ac1..cb72ff32a29b 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -3248,7 +3248,7 @@ static char *ice_get_opt_fw_name(struct ice_pf *pf)
 	if (!opt_fw_filename)
 		return NULL;
 
-	snprintf(opt_fw_filename, NAME_MAX, "%sice-%016llX.pkg",
+	snprintf(opt_fw_filename, NAME_MAX, "%sice-%016llx.pkg",
 		 ICE_DDP_PKG_PATH, dsn);
 
 	return opt_fw_filename;
-- 
2.26.2

[net-next 12/14] ice: Use coalesce values from q_vector 0 when increasing q_vectors

[Jeff Kirsher]

From: Brett Creeley <brett.creeley@intel.com>

Currently when a VSI is built (i.e. reset, set channels, etc.)
the coalesce settings will be preserved in most cases. However, when the
number of q_vectors are increased the settings for the new q_vectors
will be set to the driver defaults of AIM on, Rx/Tx ITR 50, and INTRL 0.
This is causing issues with how the ethtool layer gets the current
coalesce settings since it only uses q_vector 0. So, assume that the user
set the coalesce settings globally (i.e. ethtool -C eth0) and use q_vector
0's settings for all of the new q_vectors.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_lib.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index ecc04a696e50..28b46cc9f5cb 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -2707,15 +2707,13 @@ ice_vsi_rebuild_set_coalesce(struct ice_vsi *vsi,
 		ice_vsi_rebuild_update_coalesce(vsi->q_vectors[i],
 						&coalesce[i]);
 
-	for (; i < vsi->num_q_vectors; i++) {
-		struct ice_coalesce_stored coalesce_dflt = {
-			.itr_tx = ICE_DFLT_TX_ITR,
-			.itr_rx = ICE_DFLT_RX_ITR,
-			.intrl = 0
-		};
+	/* number of q_vectors increased, so assume coalesce settings were
+	 * changed globally (i.e. ethtool -C eth0 instead of per-queue) and use
+	 * the previous settings from q_vector 0 for all of the new q_vectors
+	 */
+	for (; i < vsi->num_q_vectors; i++)
 		ice_vsi_rebuild_update_coalesce(vsi->q_vectors[i],
-						&coalesce_dflt);
-	}
+						&coalesce[0]);
 }
 
 /**
-- 
2.26.2

[net-next 13/14] ice: fix aRFS after flow director delete

[Jeff Kirsher]

From: Henry Tieman <henry.w.tieman@intel.com>

The logic was missing for adding back perfect flows after flow director
filter delete. The code now adds perfect flows into the HW tables after
filter delete.

Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 .../net/ethernet/intel/ice/ice_ethtool_fdir.c | 27 ++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c b/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
index 42803fc0ed18..d7430ce6af26 100644
--- a/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
+++ b/drivers/net/ethernet/intel/ice/ice_ethtool_fdir.c
@@ -1363,6 +1363,31 @@ void ice_vsi_manage_fdir(struct ice_vsi *vsi, bool ena)
 	mutex_unlock(&hw->fdir_fltr_lock);
 }
 
+/**
+ * ice_fdir_do_rem_flow - delete flow and possibly add perfect flow
+ * @pf: PF structure
+ * @flow_type: FDir flow type to release
+ */
+static void
+ice_fdir_do_rem_flow(struct ice_pf *pf, enum ice_fltr_ptype flow_type)
+{
+	struct ice_hw *hw = &pf->hw;
+	bool need_perfect = false;
+
+	if (flow_type == ICE_FLTR_PTYPE_NONF_IPV4_TCP ||
+	    flow_type == ICE_FLTR_PTYPE_NONF_IPV4_UDP ||
+	    flow_type == ICE_FLTR_PTYPE_NONF_IPV6_TCP ||
+	    flow_type == ICE_FLTR_PTYPE_NONF_IPV6_UDP)
+		need_perfect = true;
+
+	if (need_perfect && test_bit(flow_type, hw->fdir_perfect_fltr))
+		return;
+
+	ice_fdir_rem_flow(hw, ICE_BLK_FD, flow_type);
+	if (need_perfect)
+		ice_create_init_fdir_rule(pf, flow_type);
+}
+
 /**
  * ice_fdir_update_list_entry - add or delete a filter from the filter list
  * @pf: PF structure
@@ -1393,7 +1418,7 @@ ice_fdir_update_list_entry(struct ice_pf *pf, struct ice_fdir_fltr *input,
 			/* we just deleted the last filter of flow_type so we
 			 * should also delete the HW filter info.
 			 */
-			ice_fdir_rem_flow(hw, ICE_BLK_FD, old_fltr->flow_type);
+			ice_fdir_do_rem_flow(pf, old_fltr->flow_type);
 		list_del(&old_fltr->fltr_node);
 		devm_kfree(ice_hw_to_dev(hw), old_fltr);
 	}
-- 
2.26.2

[net-next 14/14] ice: Ignore EMODE when setting PHY config

[Jeff Kirsher]

From: Chinh T Cao <chinh.t.cao@intel.com>

When setting the PHY cfg (CQ cmd 0x0601), if the firmware responds
with an EMODE error, software will ignore the error as it simply
means that manageability (ex: BMC) is in control of the link and that
the new setting may not be applied.

Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_adminq_cmd.h | 1 +
 drivers/net/ethernet/intel/ice/ice_common.c     | 7 ++++++-
 drivers/net/ethernet/intel/ice/ice_main.c       | 2 ++
 3 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
index 50040c5c55ec..92f82f2a8af4 100644
--- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
+++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h
@@ -1826,6 +1826,7 @@ enum ice_aq_err {
 	ICE_AQ_RC_EINVAL	= 14, /* Invalid argument */
 	ICE_AQ_RC_ENOSPC	= 16, /* No space left or allocation failure */
 	ICE_AQ_RC_ENOSYS	= 17, /* Function not implemented */
+	ICE_AQ_RC_EMODE		= 21, /* Op not allowed in current dev mode */
 	ICE_AQ_RC_ENOSEC	= 24, /* Missing security manifest */
 	ICE_AQ_RC_EBADSIG	= 25, /* Bad RSA signature */
 	ICE_AQ_RC_ESVN		= 26, /* SVN number prohibits this package */
diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index d4a31c734326..bce0e1281168 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -2232,6 +2232,7 @@ ice_aq_set_phy_cfg(struct ice_hw *hw, u8 lport,
 		   struct ice_aqc_set_phy_cfg_data *cfg, struct ice_sq_cd *cd)
 {
 	struct ice_aq_desc desc;
+	enum ice_status status;
 
 	if (!cfg)
 		return ICE_ERR_PARAM;
@@ -2260,7 +2261,11 @@ ice_aq_set_phy_cfg(struct ice_hw *hw, u8 lport,
 	ice_debug(hw, ICE_DBG_LINK, "eeer_value = 0x%x\n", cfg->eeer_value);
 	ice_debug(hw, ICE_DBG_LINK, "link_fec_opt = 0x%x\n", cfg->link_fec_opt);
 
-	return ice_aq_send_cmd(hw, &desc, cfg, sizeof(*cfg), cd);
+	status = ice_aq_send_cmd(hw, &desc, cfg, sizeof(*cfg), cd);
+	if (hw->adminq.sq_last_status == ICE_AQ_RC_EMODE)
+		status = 0;
+
+	return status;
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index cb72ff32a29b..082825e3cb39 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -5159,6 +5159,8 @@ const char *ice_aq_str(enum ice_aq_err aq_err)
 		return "ICE_AQ_RC_ENOSPC";
 	case ICE_AQ_RC_ENOSYS:
 		return "ICE_AQ_RC_ENOSYS";
+	case ICE_AQ_RC_EMODE:
+		return "ICE_AQ_RC_EMODE";
 	case ICE_AQ_RC_ENOSEC:
 		return "ICE_AQ_RC_ENOSEC";
 	case ICE_AQ_RC_EBADSIG:
-- 
2.26.2

RE: [net-next 00/14][pull request] 100GbE Intel Wired LAN Driver Updates 2020-05-31

[Kirsher, Jeffrey T]

> -----Original Message-----
> From: Kirsher, Jeffrey T <jeffrey.t.kirsher@intel.com>
> Sent: Sunday, May 31, 2020 05:36
> To: davem@davemloft.net
> Cc: Kirsher, Jeffrey T <jeffrey.t.kirsher@intel.com>; netdev@vger.kernel.org;
> nhorman@redhat.com; sassmann@redhat.com
> Subject: [net-next 00/14][pull request] 100GbE Intel Wired LAN Driver Updates
> 2020-05-31
> 
> This series contains updates to the ice driver only.
> 
> Brett modifies the driver to allow users to clear a VF's administratively set MAC
> address on the PF.  Fixes the driver to recognize an existing VLAN tag when
> DMAC/SMAC is enabled in a packet.
> Fixes an issue, so that VF's are reset after any VF port VLAN modifications are
> made on the PF.  Made sure the register QRXFLXP_CNTXT is cleared before
> writing a new value to ensure the previous value is not passed forward.
> Updates the PF to allow the VF to request a reset as soon as it has been
> initialized.  Fixes an issue to ensure when a VSI is created, it uses the current
> coalesce value, not the default value.
> 
> Paul allows untrusted VF's to add 16 filters.
> 
> Dan increases the timeout needed after a PFR to allow ample time for package
> download.
> 
> Chinh adjust the define value for the number of PHY speeds we currently
> support.  Changes the driver to ignore EMODE error when configuring the PHY.
> 
> Jesse fixes an issue which was preventing a user from configuring the interface
> before bringing it up.
> 
> Henry fixes the logic for adding back perfect flows after flow director filter does
> a deletion.
> 
> Bruce fixes line wrappings to make it more consistent.

This is my last series of patches, in anticipation of the merge window for net-next closing.

Re: [net-next 00/14][pull request] 100GbE Intel Wired LAN Driver Updates 2020-05-31

[David Miller]

From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Sun, 31 May 2020 05:36:05 -0700

> This series contains updates to the ice driver only.

Pulled, thanks Jeff.