* [PATCHv2 2/8] imx: Remove ARCH= references from documentation
2020-05-26 18:36 [PATCHv2 1/8] amlogic: Remove ARCH= references from documentation Tom Rini
@ 2020-05-26 18:36 ` Tom Rini
2020-06-03 16:25 ` Tom Rini
2020-05-26 18:36 ` [PATCHv2 3/8] powerpc: " Tom Rini
` (6 subsequent siblings)
7 siblings, 1 reply; 18+ messages in thread
From: Tom Rini @ 2020-05-26 18:36 UTC (permalink / raw)
To: u-boot
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.
Cc: Adam Ford <aford173@gmail.com>
Cc: Vanessa Maegima <vanessa.maegima@nxp.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v2:
- Move actions cubieboard to its own commit, oops.
As an aside, the README files that haven't already been converted to rST
should be converted rST and moved to doc/board/ and the MAINTAINERS file
updated to include the new documentation file too. Thanks!
---
board/beacon/imx8mm/README | 2 +-
board/logicpd/imx6/README | 2 +-
board/technexion/pico-imx7d/README.pico-imx7d_BL33 | 2 +-
doc/board/toradex/colibri_imx7.rst | 1 -
4 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/board/beacon/imx8mm/README b/board/beacon/imx8mm/README
index 4223fbd15dd6..dce176fa0b23 100644
--- a/board/beacon/imx8mm/README
+++ b/board/beacon/imx8mm/README
@@ -26,7 +26,7 @@ $ cp firmware-imx-8.5/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
Build U-Boot
============
$ make imx8mm_beacon_defconfig
-$ make flash.bin ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000
+$ make flash.bin CROSS_COMPILE=aarch64-linux-gnu- ATF_LOAD_ADDR=0x920000
Burn U-Boot to microSD Card
===========================
diff --git a/board/logicpd/imx6/README b/board/logicpd/imx6/README
index 26d053a32c3b..19f79c5734bc 100644
--- a/board/logicpd/imx6/README
+++ b/board/logicpd/imx6/README
@@ -17,7 +17,7 @@ Building U-Boot for Logic PD Development Kit
To build U-Boot for the Dual and Quad variants:
make imx6q_logic_defconfig
- make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux-
+ make u-boot.imx CROSS_COMPILE=arm-linux-
Flashing U-Boot into the SD card
diff --git a/board/technexion/pico-imx7d/README.pico-imx7d_BL33 b/board/technexion/pico-imx7d/README.pico-imx7d_BL33
index 40324ffe5f34..1b346093b88d 100644
--- a/board/technexion/pico-imx7d/README.pico-imx7d_BL33
+++ b/board/technexion/pico-imx7d/README.pico-imx7d_BL33
@@ -4,7 +4,7 @@ The boot sequence is ATF -> OPTEE -> U-Boot -> Linux. U-Boot is in non-secure
world in this case.
- Build u-boot
- Set environment variable of CROSS_COMPILE for your toolchain and ARCH=arm
+ Set environment variable of CROSS_COMPILE for your toolchain
$ make pico-imx7d_bl33_defconfig
$ make all
diff --git a/doc/board/toradex/colibri_imx7.rst b/doc/board/toradex/colibri_imx7.rst
index 6fb952666661..a30e721379ee 100644
--- a/doc/board/toradex/colibri_imx7.rst
+++ b/doc/board/toradex/colibri_imx7.rst
@@ -18,7 +18,6 @@ Build U-Boot
.. code-block:: bash
$ export CROSS_COMPILE=arm-linux-gnueabi-
- $ export ARCH=arm
$ make colibri_imx7_emmc_defconfig # For NAND: colibri_imx7_defconfig
$ make
--
2.17.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCHv2 2/8] imx: Remove ARCH= references from documentation
2020-05-26 18:36 ` [PATCHv2 2/8] imx: " Tom Rini
@ 2020-06-03 16:25 ` Tom Rini
0 siblings, 0 replies; 18+ messages in thread
From: Tom Rini @ 2020-06-03 16:25 UTC (permalink / raw)
To: u-boot
On Tue, May 26, 2020 at 02:36:49PM -0400, Tom Rini wrote:
> When building U-Boot we select the architecture via Kconfig and not ARCH
> being passed in via the environment or make cmdline.
>
> Cc: Adam Ford <aford173@gmail.com>
> Cc: Vanessa Maegima <vanessa.maegima@nxp.com>
> Cc: Otavio Salvador <otavio@ossystems.com.br>
> Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Tom Rini <trini@konsulko.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200603/1c69e6de/attachment.sig>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCHv2 3/8] powerpc: Remove ARCH= references from documentation
2020-05-26 18:36 [PATCHv2 1/8] amlogic: Remove ARCH= references from documentation Tom Rini
2020-05-26 18:36 ` [PATCHv2 2/8] imx: " Tom Rini
@ 2020-05-26 18:36 ` Tom Rini
2020-06-03 16:25 ` Tom Rini
2020-05-26 18:36 ` [PATCHv2 4/8] rockchip: " Tom Rini
` (5 subsequent siblings)
7 siblings, 1 reply; 18+ messages in thread
From: Tom Rini @ 2020-05-26 18:36 UTC (permalink / raw)
To: u-boot
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.
Cc: Po Liu <po.liu@nxp.com>
Cc: Qiang Zhao <qiang.zhao@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v2:
- None
As an aside, these files should be converted rST and moved to doc/board/
and the MAINTAINERS file updated to include the new documentation file
too. Thanks!
---
board/freescale/c29xpcie/README | 1 -
board/freescale/p1010rdb/README.P1010RDB-PA | 1 -
board/freescale/p1010rdb/README.P1010RDB-PB | 1 -
3 files changed, 3 deletions(-)
diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README
index 2e249cbb3a2e..a6120f1845d2 100644
--- a/board/freescale/c29xpcie/README
+++ b/board/freescale/c29xpcie/README
@@ -56,7 +56,6 @@ Note: 1 stands for 'off', 0 stands for 'on'
Build and program U-Boot to NOR flash
==================================
1. Build u-boot.bin image example:
- export ARCH=powerpc
export CROSS_COMPILE=/your_path/powerpc-linux-gnu-
make C293PCIE
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index 105942f7a54f..46c61237c727 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -98,7 +98,6 @@ instead of to CAN/UART1.
Build and burn U-Boot to NOR flash
==================================
1. Build u-boot.bin image
- export ARCH=powerpc
export CROSS_COMPILE=/your_path/powerpc-linux-gnu-
make P1010RDB_NOR
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB
index dc82f0df0984..4a3b389877fc 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PB
+++ b/board/freescale/p1010rdb/README.P1010RDB-PB
@@ -128,7 +128,6 @@ To enable IFC in case of SD boot
Build images for different boot mode
====================================
First setup cross compile environment on build host
- $ export ARCH=powerpc
$ export CROSS_COMPILE=<your-compiler-path>/powerpc-linux-gnu-
1. For NOR boot
--
2.17.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCHv2 4/8] rockchip: Remove ARCH= references from documentation
2020-05-26 18:36 [PATCHv2 1/8] amlogic: Remove ARCH= references from documentation Tom Rini
2020-05-26 18:36 ` [PATCHv2 2/8] imx: " Tom Rini
2020-05-26 18:36 ` [PATCHv2 3/8] powerpc: " Tom Rini
@ 2020-05-26 18:36 ` Tom Rini
2020-05-31 14:08 ` Simon Glass
2020-06-03 16:26 ` Tom Rini
2020-05-26 18:36 ` [PATCHv2 5/8] arm: ti: " Tom Rini
` (4 subsequent siblings)
7 siblings, 2 replies; 18+ messages in thread
From: Tom Rini @ 2020-05-26 18:36 UTC (permalink / raw)
To: u-boot
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.
Acked-by: Kever Yang <kever.yang@rock-chips.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v2:
- None
As an aside, these files should be converted rST and moved to doc/board/
and the MAINTAINERS file updated to include the new documentation file
too. Thanks!
---
board/rockchip/evb_rk3229/README | 1 -
board/rockchip/evb_rk3399/README | 1 -
board/theobroma-systems/lion_rk3368/README | 4 ++--
board/vamrs/rock960_rk3399/README | 1 -
4 files changed, 2 insertions(+), 5 deletions(-)
diff --git a/board/rockchip/evb_rk3229/README b/board/rockchip/evb_rk3229/README
index 93328c75b204..9068225e2721 100644
--- a/board/rockchip/evb_rk3229/README
+++ b/board/rockchip/evb_rk3229/README
@@ -22,7 +22,6 @@ Compile the U-Boot
> cd ../u-boot
> export CROSS_COMPILE=arm-linux-gnueabihf-
- > export ARCH=arm
> make evb-rk3229_defconfig
> make
> make u-boot.itb
diff --git a/board/rockchip/evb_rk3399/README b/board/rockchip/evb_rk3399/README
index da7ae89ab1e9..c6f58203ebe9 100644
--- a/board/rockchip/evb_rk3399/README
+++ b/board/rockchip/evb_rk3399/README
@@ -54,7 +54,6 @@ Compile U-Boot
==============
> cd ../u-boot
- > export ARCH=arm64
> export CROSS_COMPILE=aarch64-linux-gnu-
> make evb-rk3399_defconfig
for firefly-rk3399, use below instead:
diff --git a/board/theobroma-systems/lion_rk3368/README b/board/theobroma-systems/lion_rk3368/README
index ad3ac93bd44b..7488b18326b9 100644
--- a/board/theobroma-systems/lion_rk3368/README
+++ b/board/theobroma-systems/lion_rk3368/README
@@ -17,12 +17,12 @@ Configure U-Boot
Build the TPL/SPL stage
=======================
- > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm
+ > make CROSS_COMPILE=aarch64-unknown-elf-
Build the full U-Boot and a FIT image including the ATF
=======================================================
- > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm u-boot.itb
+ > make CROSS_COMPILE=aarch64-unknown-elf- u-boot.itb
Flash the image
===============
diff --git a/board/vamrs/rock960_rk3399/README b/board/vamrs/rock960_rk3399/README
index c5c675c4ead1..15df027fbcd4 100644
--- a/board/vamrs/rock960_rk3399/README
+++ b/board/vamrs/rock960_rk3399/README
@@ -57,7 +57,6 @@ Compile the U-Boot
> cd ../u-boot
> cp ../rkbin/rk33/rk3399_bl31_v1.00.elf ./bl31.elf
- > export ARCH=arm64
> export CROSS_COMPILE=aarch64-linux-gnu-
> make rock960-rk3399_defconfig
> make
--
2.17.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCHv2 4/8] rockchip: Remove ARCH= references from documentation
2020-05-26 18:36 ` [PATCHv2 4/8] rockchip: " Tom Rini
@ 2020-05-31 14:08 ` Simon Glass
2020-06-03 16:26 ` Tom Rini
1 sibling, 0 replies; 18+ messages in thread
From: Simon Glass @ 2020-05-31 14:08 UTC (permalink / raw)
To: u-boot
On Tue, 26 May 2020 at 12:37, Tom Rini <trini@konsulko.com> wrote:
>
> When building U-Boot we select the architecture via Kconfig and not ARCH
> being passed in via the environment or make cmdline.
>
> Acked-by: Kever Yang <kever.yang@rock-chips.com>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Acked-by: Klaus Goger <klaus.goger@theobroma-systems.com>
> Cc: Jagan Teki <jagan@amarulasolutions.com>
> Signed-off-by: Tom Rini <trini@konsulko.com>
> ---
> Changes in v2:
> - None
>
> As an aside, these files should be converted rST and moved to doc/board/
> and the MAINTAINERS file updated to include the new documentation file
> too. Thanks!
> ---
> board/rockchip/evb_rk3229/README | 1 -
> board/rockchip/evb_rk3399/README | 1 -
> board/theobroma-systems/lion_rk3368/README | 4 ++--
> board/vamrs/rock960_rk3399/README | 1 -
> 4 files changed, 2 insertions(+), 5 deletions(-)
>
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCHv2 4/8] rockchip: Remove ARCH= references from documentation
2020-05-26 18:36 ` [PATCHv2 4/8] rockchip: " Tom Rini
2020-05-31 14:08 ` Simon Glass
@ 2020-06-03 16:26 ` Tom Rini
1 sibling, 0 replies; 18+ messages in thread
From: Tom Rini @ 2020-06-03 16:26 UTC (permalink / raw)
To: u-boot
On Tue, May 26, 2020 at 02:36:51PM -0400, Tom Rini wrote:
> When building U-Boot we select the architecture via Kconfig and not ARCH
> being passed in via the environment or make cmdline.
>
> Acked-by: Kever Yang <kever.yang@rock-chips.com>
> Cc: Simon Glass <sjg@chromium.org>
> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
> Acked-by: Klaus Goger <klaus.goger@theobroma-systems.com>
> Cc: Jagan Teki <jagan@amarulasolutions.com>
> Signed-off-by: Tom Rini <trini@konsulko.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200603/991ba9cf/attachment.sig>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCHv2 5/8] arm: ti: Remove ARCH= references from documentation
2020-05-26 18:36 [PATCHv2 1/8] amlogic: Remove ARCH= references from documentation Tom Rini
` (2 preceding siblings ...)
2020-05-26 18:36 ` [PATCHv2 4/8] rockchip: " Tom Rini
@ 2020-05-26 18:36 ` Tom Rini
2020-06-03 16:26 ` Tom Rini
2020-05-26 18:36 ` [PATCHv2 6/8] m68k: " Tom Rini
` (3 subsequent siblings)
7 siblings, 1 reply; 18+ messages in thread
From: Tom Rini @ 2020-05-26 18:36 UTC (permalink / raw)
To: u-boot
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: Vitaly Andrianov <vitalya@ti.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v2:
- None
As an aside, these README files should be converted rST and moved to
doc/board/ and the MAINTAINERS file updated to include the new
documentation file too. Thanks!
---
board/ti/am65x/README | 8 ++++----
board/ti/j721e/README | 8 ++++----
board/ti/ks2_evm/README | 2 +-
doc/uImage.FIT/beaglebone_vboot.txt | 1 -
4 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/board/ti/am65x/README b/board/ti/am65x/README
index 00be1ffe44d6..67081ce349dc 100644
--- a/board/ti/am65x/README
+++ b/board/ti/am65x/README
@@ -133,12 +133,12 @@ $ make PLATFORM=k3-am65x CFG_ARM64_core=y
4. U-Boot:
4.1. R5:
-$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- am65x_evm_r5_defconfig O=/tmp/r5
-$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
+$ make CROSS_COMPILE=arm-linux-gnueabihf- am65x_evm_r5_defconfig O=/tmp/r5
+$ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
4.2. A53:
-$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- am65x_evm_a53_defconfig O=/tmp/a53
-$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin O=/tmp/a53
+$ make CROSS_COMPILE=aarch64-linux-gnu- am65x_evm_a53_defconfig O=/tmp/a53
+$ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin O=/tmp/a53
Target Images
--------------
diff --git a/board/ti/j721e/README b/board/ti/j721e/README
index 7dcf33633294..757a59cdb44a 100644
--- a/board/ti/j721e/README
+++ b/board/ti/j721e/README
@@ -149,12 +149,12 @@ $ make PLATFORM=k3-j721e CFG_ARM64_core=y
4. U-Boot:
4.1. R5:
-$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=/tmp/r5
-$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
+$ make CROSS_COMPILE=arm-linux-gnueabihf- j721e_evm_r5_defconfig O=/tmp/r5
+$ make CROSS_COMPILE=arm-linux-gnueabihf- O=/tmp/r5
4.2. A72:
-$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=/tmp/a72
-$ make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin O=/tmp/a72
+$ make CROSS_COMPILE=aarch64-linux-gnu- j721e_evm_a72_defconfig O=/tmp/a72
+$ make CROSS_COMPILE=aarch64-linux-gnu- ATF=<path to ATF dir>/build/k3/generic/release/bl31.bin TEE=<path to OPTEE OS dir>/out/arm-plat-k3/core/tee-pager_v2.bin O=/tmp/a72
Target Images
--------------
diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README
index a26b7f813131..ff0ec5a36377 100644
--- a/board/ti/ks2_evm/README
+++ b/board/ti/ks2_evm/README
@@ -74,7 +74,7 @@ Supported image formats:
Build instructions:
===================
Examples for k2hk, for k2e, k2l and k2g just replace k2hk prefix accordingly.
-Don't forget to add ARCH=arm and CROSS_COMPILE.
+Don't forget to add CROSS_COMPILE.
To build u-boot.bin, u-boot-spi.gph, MLO:
>make k2hk_evm_defconfig
diff --git a/doc/uImage.FIT/beaglebone_vboot.txt b/doc/uImage.FIT/beaglebone_vboot.txt
index 685ec1f46d96..ebd2068ed38d 100644
--- a/doc/uImage.FIT/beaglebone_vboot.txt
+++ b/doc/uImage.FIT/beaglebone_vboot.txt
@@ -67,7 +67,6 @@ or if you just installed gcc-arm-linux-gnueabi then it might be
b. Configure and build U-Boot with verified boot enabled:
- export ARCH=arm
export UBOOT=/path/to/u-boot
cd $UBOOT
# You can add -j10 if you have 10 CPUs to make it faster
--
2.17.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCHv2 6/8] m68k: Remove ARCH= references from documentation
2020-05-26 18:36 [PATCHv2 1/8] amlogic: Remove ARCH= references from documentation Tom Rini
` (3 preceding siblings ...)
2020-05-26 18:36 ` [PATCHv2 5/8] arm: ti: " Tom Rini
@ 2020-05-26 18:36 ` Tom Rini
2020-06-03 16:26 ` Tom Rini
2020-05-26 18:36 ` [PATCHv2 7/8] fu540: " Tom Rini
` (2 subsequent siblings)
7 siblings, 1 reply; 18+ messages in thread
From: Tom Rini @ 2020-05-26 18:36 UTC (permalink / raw)
To: u-boot
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.
While in here, add the doc file to the MAINTAINERS entry for coldfire.
Cc: Huan Wang <alison.wang@nxp.com>
Cc: Angelo Dureghello <angelo@sysam.it>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v2:
- None
---
MAINTAINERS | 1 +
doc/arch/m68k.rst | 6 +++---
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9da0459bf747..660b12f1a87e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -590,6 +590,7 @@ M: Angelo Dureghello <angelo@sysam.it>
S: Maintained
T: git https://gitlab.denx.de/u-boot/custodians/u-boot-coldfire.git
F: arch/m68k/
+F: doc/arch/m68k.rst
DFU
M: Lukasz Majewski <lukma@denx.de>
diff --git a/doc/arch/m68k.rst b/doc/arch/m68k.rst
index 34b2593eb85b..44e1a5dfa384 100644
--- a/doc/arch/m68k.rst
+++ b/doc/arch/m68k.rst
@@ -35,7 +35,7 @@ development boards.
Supported CPU families
----------------------
-Please "make menuconfig" with ARCH=m68k, or check arch/m68k/cpu to see the
+Please "make menuconfig" and select "m68k" or check arch/m68k/cpu to see the
currently supported processor and families.
@@ -75,8 +75,8 @@ A bash script similar to the one below may be used:
board=M5475DFE
make distclean
- make ARCH=m68k ${board}_defconfig
- make ARCH=m68k KBUILD_VERBOSE=1
+ make ${board}_defconfig
+ make KBUILD_VERBOSE=1
Adopted toolchains
--
2.17.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCHv2 7/8] fu540: Remove ARCH= references from documentation
2020-05-26 18:36 [PATCHv2 1/8] amlogic: Remove ARCH= references from documentation Tom Rini
` (4 preceding siblings ...)
2020-05-26 18:36 ` [PATCHv2 6/8] m68k: " Tom Rini
@ 2020-05-26 18:36 ` Tom Rini
2020-06-03 16:26 ` Tom Rini
2020-05-26 18:36 ` [PATCHv2 8/8] cubieboard7: " Tom Rini
2020-06-03 16:25 ` [PATCHv2 1/8] amlogic: " Tom Rini
7 siblings, 1 reply; 18+ messages in thread
From: Tom Rini @ 2020-05-26 18:36 UTC (permalink / raw)
To: u-boot
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.
While in here, add the doc file to the MAINTAINERS entry.
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Anup Patel <anup.patel@wdc.com>
Cc: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v2:
- Fix the MAINTAINERS line in commit message.
---
board/sifive/fu540/MAINTAINERS | 1 +
doc/board/sifive/fu540.rst | 1 -
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/sifive/fu540/MAINTAINERS b/board/sifive/fu540/MAINTAINERS
index 702d803ad809..93df97913355 100644
--- a/board/sifive/fu540/MAINTAINERS
+++ b/board/sifive/fu540/MAINTAINERS
@@ -5,5 +5,6 @@ M: Anup Patel <anup.patel@wdc.com>
M: Atish Patra <atish.patra@wdc.com>
S: Maintained
F: board/sifive/fu540/
+F: doc/board/sifive/fu540.rst
F: include/configs/sifive-fu540.h
F: configs/sifive_fu540_defconfig
diff --git a/doc/board/sifive/fu540.rst b/doc/board/sifive/fu540.rst
index 610ba87074b4..43402cb2e51e 100644
--- a/doc/board/sifive/fu540.rst
+++ b/doc/board/sifive/fu540.rst
@@ -39,7 +39,6 @@ Building
.. code-block:: none
- export ARCH=riscv
export CROSS_COMPILE=<riscv64 toolchain prefix>
3. make sifive_fu540_defconfig
--
2.17.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCHv2 7/8] fu540: Remove ARCH= references from documentation
2020-05-26 18:36 ` [PATCHv2 7/8] fu540: " Tom Rini
@ 2020-06-03 16:26 ` Tom Rini
0 siblings, 0 replies; 18+ messages in thread
From: Tom Rini @ 2020-06-03 16:26 UTC (permalink / raw)
To: u-boot
On Tue, May 26, 2020 at 02:36:54PM -0400, Tom Rini wrote:
> When building U-Boot we select the architecture via Kconfig and not ARCH
> being passed in via the environment or make cmdline.
>
> While in here, add the doc file to the MAINTAINERS entry.
>
> Cc: Paul Walmsley <paul.walmsley@sifive.com>
> Cc: Palmer Dabbelt <palmer@sifive.com>
> Cc: Anup Patel <anup.patel@wdc.com>
> Cc: Atish Patra <atish.patra@wdc.com>
> Signed-off-by: Tom Rini <trini@konsulko.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200603/9b34b127/attachment.sig>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCHv2 8/8] cubieboard7: Remove ARCH= references from documentation
2020-05-26 18:36 [PATCHv2 1/8] amlogic: Remove ARCH= references from documentation Tom Rini
` (5 preceding siblings ...)
2020-05-26 18:36 ` [PATCHv2 7/8] fu540: " Tom Rini
@ 2020-05-26 18:36 ` Tom Rini
2020-05-26 18:47 ` Amit Tomer
2020-06-03 16:26 ` Tom Rini
2020-06-03 16:25 ` [PATCHv2 1/8] amlogic: " Tom Rini
7 siblings, 2 replies; 18+ messages in thread
From: Tom Rini @ 2020-05-26 18:36 UTC (permalink / raw)
To: u-boot
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.
While in here, add the doc file to the MAINTAINERS entry.
Cc: Amit Singh Tomar <amittomer25@gmail.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
---
Changes in v2:
- New patch
---
MAINTAINERS | 1 +
doc/board/actions/cubieboard7.rst | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 660b12f1a87e..1fd975c72f0b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -275,6 +275,7 @@ M: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
S: Maintained
F: arch/arm/include/asm/arch-owl/
F: arch/arm/mach-owl/
+F: doc/board/actions/
F: drivers/clk/owl/
F: drivers/serial/serial_owl.c
F: include/configs/owl-common.h
diff --git a/doc/board/actions/cubieboard7.rst b/doc/board/actions/cubieboard7.rst
index e01d2d0370a1..74f2b12e41fe 100644
--- a/doc/board/actions/cubieboard7.rst
+++ b/doc/board/actions/cubieboard7.rst
@@ -102,7 +102,7 @@ Building U-BOOT proper image
$ make clean
$ export CROSS_COMPILE=aarch64-linux-gnu-
- $ make ARCH=arm cubieboard7_defconfig
+ $ make cubieboard7_defconfig
$ make u-boot-dtb.img -j16
u-boot-dtb.img can now be flashed to debian image partition mounted on host machine.
--
2.17.1
^ permalink raw reply related [flat|nested] 18+ messages in thread
* [PATCHv2 8/8] cubieboard7: Remove ARCH= references from documentation
2020-05-26 18:36 ` [PATCHv2 8/8] cubieboard7: " Tom Rini
@ 2020-05-26 18:47 ` Amit Tomer
2020-06-03 16:26 ` Tom Rini
1 sibling, 0 replies; 18+ messages in thread
From: Amit Tomer @ 2020-05-26 18:47 UTC (permalink / raw)
To: u-boot
Hi,
On Wed, May 27, 2020 at 12:07 AM Tom Rini <trini@konsulko.com> wrote:
>
> When building U-Boot we select the architecture via Kconfig and not ARCH
> being passed in via the environment or make cmdline.
>
> While in here, add the doc file to the MAINTAINERS entry.
>
> Cc: Amit Singh Tomar <amittomer25@gmail.com>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Tom Rini <trini@konsulko.com>
> ---
> Changes in v2:
> - New patch
> ---
> MAINTAINERS | 1 +
> doc/board/actions/cubieboard7.rst | 2 +-
> 2 files changed, 2 insertions(+), 1 deletion(-)
Reviewed-by: Amit Singh Tomar <amittomer25@gmail.com>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCHv2 8/8] cubieboard7: Remove ARCH= references from documentation
2020-05-26 18:36 ` [PATCHv2 8/8] cubieboard7: " Tom Rini
2020-05-26 18:47 ` Amit Tomer
@ 2020-06-03 16:26 ` Tom Rini
1 sibling, 0 replies; 18+ messages in thread
From: Tom Rini @ 2020-06-03 16:26 UTC (permalink / raw)
To: u-boot
On Tue, May 26, 2020 at 02:36:55PM -0400, Tom Rini wrote:
> When building U-Boot we select the architecture via Kconfig and not ARCH
> being passed in via the environment or make cmdline.
>
> While in here, add the doc file to the MAINTAINERS entry.
>
> Cc: Amit Singh Tomar <amittomer25@gmail.com>
> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Tom Rini <trini@konsulko.com>
> Reviewed-by: Amit Singh Tomar <amittomer25@gmail.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200603/c4c7b41e/attachment.sig>
^ permalink raw reply [flat|nested] 18+ messages in thread
* [PATCHv2 1/8] amlogic: Remove ARCH= references from documentation
2020-05-26 18:36 [PATCHv2 1/8] amlogic: Remove ARCH= references from documentation Tom Rini
` (6 preceding siblings ...)
2020-05-26 18:36 ` [PATCHv2 8/8] cubieboard7: " Tom Rini
@ 2020-06-03 16:25 ` Tom Rini
7 siblings, 0 replies; 18+ messages in thread
From: Tom Rini @ 2020-06-03 16:25 UTC (permalink / raw)
To: u-boot
On Tue, May 26, 2020 at 02:36:48PM -0400, Tom Rini wrote:
> When building U-Boot we select the architecture via Kconfig and not ARCH
> being passed in via the environment or make cmdline.
>
> Cc: Beniamino Galvani <b.galvani@gmail.com>
> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
> Cc: u-boot-amlogic at groups.io
> Signed-off-by: Tom Rini <trini@konsulko.com>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200603/048ae196/attachment.sig>
^ permalink raw reply [flat|nested] 18+ messages in thread