* [PATCH v10 00/20] Introduction of the generic ECC framework
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
After discussing with Boris, he convinced me that the changes should
be done in another order. That's why first I update the nand_ecc_algo
enumeration in raw NAND, then I introduce the new bindings and the ECC
core itself. Only after that, I patch the raw NAND core (and slightly
SPI-NAND) to share the generic data with the NAND core/ECC framework.
Changes in v10:
* After reworking the entire series, I only kept 4 patches aside,
resending all of them.
* Fixed typos, updated commit logs as proposed.
* Introduced nanddev_set_ecc_requirements().
* Used spaces instead of tabs in an array.
* Renamed the nand_ecc_is_strong_enough() helper.
* Dropped the use of the MAXIMIZE flag in denali.c.
* Renamed this flag MAXIMIZE_STRENGTH.
* Renamed the of_get_nand_ecc_config*() helpers.
Changes in v9:
* This time sending the additional patchs, not just the old ones with
corrections. v8 should be ignored, sorry for the noise.
Changes in v8:
* Split "Convert generic NAND bits to ECC framework" into several peaces:
> added two helpers
> converted SPI-NAND then raw-NAND.
* Fixed a comment.
* Used the _ooblayout suffix instead of _layout.
Miquel Raynal (20):
mtd: rawnand: Add a kernel doc to the ECC algorithm enumeration
mtd: rawnand: Rename the ECC algorithm enumeration items
mtd: rawnand: Move the nand_ecc_algo enum to the generic NAND layer
mtd: nand: Add a NAND page I/O request type
dt-bindings: mtd: Document nand-ecc-placement
dt-bindings: mtd: Document nand-ecc-engine
dt-bindings: mtd: Document boolean NAND ECC properties
mtd: nand: Introduce the ECC engine framework
mtd: rawnand: Separate the ECC engine type and the ECC byte placement
mtd: rawnand: Use the new ECC engine type enumeration
mtd: nand: Create a helper to extract the ECC configuration
mtd: spinand: Use nanddev_get_ecc_conf() when relevant
mtd: nand: Create helpers to set/extract the ECC requirements
mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant
mtd: nand: Use the new generic ECC object
mtd: rawnand: Make use of the ECC framework
mtd: rawnand: Use the ECC framework OOB layouts
mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helper
mtd: rawnand: Use the ECC framework user input parsing bits
mtd: rawnand: Use the NAND framework user_conf object for ECC flags
.../bindings/mtd/nand-controller.yaml | 28 +
arch/arm/mach-davinci/board-da830-evm.c | 2 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-leopard.c | 3 +-
arch/arm/mach-davinci/board-dm365-evm.c | 2 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 2 +-
arch/arm/mach-davinci/board-mityomapl138.c | 2 +-
arch/arm/mach-davinci/board-neuros-osd2.c | 2 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +-
arch/arm/mach-s3c24xx/common-smdk.c | 2 +-
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-bast.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-qt2410.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 2 +-
arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
arch/arm/mach-s3c64xx/mach-hmt.c | 2 +-
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 +-
arch/arm/mach-s3c64xx/mach-real6410.c | 2 +-
drivers/mtd/nand/Kconfig | 8 +
drivers/mtd/nand/Makefile | 2 +
drivers/mtd/nand/ecc.c | 484 +++++++++++++++
drivers/mtd/nand/raw/Kconfig | 1 +
drivers/mtd/nand/raw/ams-delta.c | 4 +-
drivers/mtd/nand/raw/arasan-nand-controller.c | 16 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 31 +-
drivers/mtd/nand/raw/au1550nd.c | 4 +-
.../mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c | 3 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 28 +-
.../mtd/nand/raw/cadence-nand-controller.c | 4 +-
drivers/mtd/nand/raw/cafe_nand.c | 3 +-
drivers/mtd/nand/raw/cs553x_nand.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 38 +-
drivers/mtd/nand/raw/denali.c | 3 +-
drivers/mtd/nand/raw/denali_pci.c | 2 +-
drivers/mtd/nand/raw/diskonchip.c | 3 +-
drivers/mtd/nand/raw/fsl_elbc_nand.c | 20 +-
drivers/mtd/nand/raw/fsl_ifc_nand.c | 12 +-
drivers/mtd/nand/raw/fsl_upm.c | 4 +-
drivers/mtd/nand/raw/fsmc_nand.c | 14 +-
drivers/mtd/nand/raw/gpio.c | 4 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 15 +-
drivers/mtd/nand/raw/hisi504_nand.c | 6 +-
.../mtd/nand/raw/ingenic/ingenic_nand_drv.c | 20 +-
drivers/mtd/nand/raw/lpc32xx_mlc.c | 2 +-
drivers/mtd/nand/raw/lpc32xx_slc.c | 3 +-
drivers/mtd/nand/raw/marvell_nand.c | 35 +-
drivers/mtd/nand/raw/meson_nand.c | 2 +-
drivers/mtd/nand/raw/mpc5121_nfc.c | 4 +-
drivers/mtd/nand/raw/mtk_nand.c | 12 +-
drivers/mtd/nand/raw/mxc_nand.c | 25 +-
drivers/mtd/nand/raw/nand_base.c | 565 +++++++-----------
drivers/mtd/nand/raw/nand_esmt.c | 15 +-
drivers/mtd/nand/raw/nand_hynix.c | 44 +-
drivers/mtd/nand/raw/nand_jedec.c | 9 +-
drivers/mtd/nand/raw/nand_micron.c | 23 +-
drivers/mtd/nand/raw/nand_onfi.c | 17 +-
drivers/mtd/nand/raw/nand_samsung.c | 22 +-
drivers/mtd/nand/raw/nand_toshiba.c | 19 +-
drivers/mtd/nand/raw/nandsim.c | 8 +-
drivers/mtd/nand/raw/ndfc.c | 2 +-
drivers/mtd/nand/raw/omap2.c | 22 +-
drivers/mtd/nand/raw/orion_nand.c | 4 +-
drivers/mtd/nand/raw/pasemi_nand.c | 4 +-
drivers/mtd/nand/raw/plat_nand.c | 4 +-
drivers/mtd/nand/raw/qcom_nandc.c | 2 +-
drivers/mtd/nand/raw/r852.c | 3 +-
drivers/mtd/nand/raw/s3c2410.c | 20 +-
drivers/mtd/nand/raw/sh_flctl.c | 6 +-
drivers/mtd/nand/raw/sharpsl.c | 2 +-
drivers/mtd/nand/raw/socrates_nand.c | 5 +-
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 9 +-
drivers/mtd/nand/raw/sunxi_nand.c | 27 +-
drivers/mtd/nand/raw/tango_nand.c | 4 +-
drivers/mtd/nand/raw/tegra_nand.c | 37 +-
drivers/mtd/nand/raw/tmio_nand.c | 2 +-
drivers/mtd/nand/raw/txx9ndfmc.c | 2 +-
drivers/mtd/nand/raw/vf610_nfc.c | 6 +-
drivers/mtd/nand/raw/xway_nand.c | 4 +-
drivers/mtd/nand/spi/core.c | 12 +-
drivers/mtd/nand/spi/macronix.c | 7 +-
drivers/mtd/nand/spi/toshiba.c | 6 +-
include/linux/mtd/nand.h | 188 +++++-
include/linux/mtd/rawnand.h | 34 +-
include/linux/platform_data/mtd-davinci.h | 9 +-
.../linux/platform_data/mtd-nand-s3c2410.h | 2 +-
93 files changed, 1315 insertions(+), 723 deletions(-)
create mode 100644 drivers/mtd/nand/ecc.c
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 72+ messages in thread
* [PATCH v10 00/20] Introduction of the generic ECC framework
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
After discussing with Boris, he convinced me that the changes should
be done in another order. That's why first I update the nand_ecc_algo
enumeration in raw NAND, then I introduce the new bindings and the ECC
core itself. Only after that, I patch the raw NAND core (and slightly
SPI-NAND) to share the generic data with the NAND core/ECC framework.
Changes in v10:
* After reworking the entire series, I only kept 4 patches aside,
resending all of them.
* Fixed typos, updated commit logs as proposed.
* Introduced nanddev_set_ecc_requirements().
* Used spaces instead of tabs in an array.
* Renamed the nand_ecc_is_strong_enough() helper.
* Dropped the use of the MAXIMIZE flag in denali.c.
* Renamed this flag MAXIMIZE_STRENGTH.
* Renamed the of_get_nand_ecc_config*() helpers.
Changes in v9:
* This time sending the additional patchs, not just the old ones with
corrections. v8 should be ignored, sorry for the noise.
Changes in v8:
* Split "Convert generic NAND bits to ECC framework" into several peaces:
> added two helpers
> converted SPI-NAND then raw-NAND.
* Fixed a comment.
* Used the _ooblayout suffix instead of _layout.
Miquel Raynal (20):
mtd: rawnand: Add a kernel doc to the ECC algorithm enumeration
mtd: rawnand: Rename the ECC algorithm enumeration items
mtd: rawnand: Move the nand_ecc_algo enum to the generic NAND layer
mtd: nand: Add a NAND page I/O request type
dt-bindings: mtd: Document nand-ecc-placement
dt-bindings: mtd: Document nand-ecc-engine
dt-bindings: mtd: Document boolean NAND ECC properties
mtd: nand: Introduce the ECC engine framework
mtd: rawnand: Separate the ECC engine type and the ECC byte placement
mtd: rawnand: Use the new ECC engine type enumeration
mtd: nand: Create a helper to extract the ECC configuration
mtd: spinand: Use nanddev_get_ecc_conf() when relevant
mtd: nand: Create helpers to set/extract the ECC requirements
mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant
mtd: nand: Use the new generic ECC object
mtd: rawnand: Make use of the ECC framework
mtd: rawnand: Use the ECC framework OOB layouts
mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helper
mtd: rawnand: Use the ECC framework user input parsing bits
mtd: rawnand: Use the NAND framework user_conf object for ECC flags
.../bindings/mtd/nand-controller.yaml | 28 +
arch/arm/mach-davinci/board-da830-evm.c | 2 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-leopard.c | 3 +-
arch/arm/mach-davinci/board-dm365-evm.c | 2 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 2 +-
arch/arm/mach-davinci/board-mityomapl138.c | 2 +-
arch/arm/mach-davinci/board-neuros-osd2.c | 2 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +-
arch/arm/mach-s3c24xx/common-smdk.c | 2 +-
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-bast.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-qt2410.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 2 +-
arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
arch/arm/mach-s3c64xx/mach-hmt.c | 2 +-
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 +-
arch/arm/mach-s3c64xx/mach-real6410.c | 2 +-
drivers/mtd/nand/Kconfig | 8 +
drivers/mtd/nand/Makefile | 2 +
drivers/mtd/nand/ecc.c | 484 +++++++++++++++
drivers/mtd/nand/raw/Kconfig | 1 +
drivers/mtd/nand/raw/ams-delta.c | 4 +-
drivers/mtd/nand/raw/arasan-nand-controller.c | 16 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 31 +-
drivers/mtd/nand/raw/au1550nd.c | 4 +-
.../mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c | 3 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 28 +-
.../mtd/nand/raw/cadence-nand-controller.c | 4 +-
drivers/mtd/nand/raw/cafe_nand.c | 3 +-
drivers/mtd/nand/raw/cs553x_nand.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 38 +-
drivers/mtd/nand/raw/denali.c | 3 +-
drivers/mtd/nand/raw/denali_pci.c | 2 +-
drivers/mtd/nand/raw/diskonchip.c | 3 +-
drivers/mtd/nand/raw/fsl_elbc_nand.c | 20 +-
drivers/mtd/nand/raw/fsl_ifc_nand.c | 12 +-
drivers/mtd/nand/raw/fsl_upm.c | 4 +-
drivers/mtd/nand/raw/fsmc_nand.c | 14 +-
drivers/mtd/nand/raw/gpio.c | 4 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 15 +-
drivers/mtd/nand/raw/hisi504_nand.c | 6 +-
.../mtd/nand/raw/ingenic/ingenic_nand_drv.c | 20 +-
drivers/mtd/nand/raw/lpc32xx_mlc.c | 2 +-
drivers/mtd/nand/raw/lpc32xx_slc.c | 3 +-
drivers/mtd/nand/raw/marvell_nand.c | 35 +-
drivers/mtd/nand/raw/meson_nand.c | 2 +-
drivers/mtd/nand/raw/mpc5121_nfc.c | 4 +-
drivers/mtd/nand/raw/mtk_nand.c | 12 +-
drivers/mtd/nand/raw/mxc_nand.c | 25 +-
drivers/mtd/nand/raw/nand_base.c | 565 +++++++-----------
drivers/mtd/nand/raw/nand_esmt.c | 15 +-
drivers/mtd/nand/raw/nand_hynix.c | 44 +-
drivers/mtd/nand/raw/nand_jedec.c | 9 +-
drivers/mtd/nand/raw/nand_micron.c | 23 +-
drivers/mtd/nand/raw/nand_onfi.c | 17 +-
drivers/mtd/nand/raw/nand_samsung.c | 22 +-
drivers/mtd/nand/raw/nand_toshiba.c | 19 +-
drivers/mtd/nand/raw/nandsim.c | 8 +-
drivers/mtd/nand/raw/ndfc.c | 2 +-
drivers/mtd/nand/raw/omap2.c | 22 +-
drivers/mtd/nand/raw/orion_nand.c | 4 +-
drivers/mtd/nand/raw/pasemi_nand.c | 4 +-
drivers/mtd/nand/raw/plat_nand.c | 4 +-
drivers/mtd/nand/raw/qcom_nandc.c | 2 +-
drivers/mtd/nand/raw/r852.c | 3 +-
drivers/mtd/nand/raw/s3c2410.c | 20 +-
drivers/mtd/nand/raw/sh_flctl.c | 6 +-
drivers/mtd/nand/raw/sharpsl.c | 2 +-
drivers/mtd/nand/raw/socrates_nand.c | 5 +-
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 9 +-
drivers/mtd/nand/raw/sunxi_nand.c | 27 +-
drivers/mtd/nand/raw/tango_nand.c | 4 +-
drivers/mtd/nand/raw/tegra_nand.c | 37 +-
drivers/mtd/nand/raw/tmio_nand.c | 2 +-
drivers/mtd/nand/raw/txx9ndfmc.c | 2 +-
drivers/mtd/nand/raw/vf610_nfc.c | 6 +-
drivers/mtd/nand/raw/xway_nand.c | 4 +-
drivers/mtd/nand/spi/core.c | 12 +-
drivers/mtd/nand/spi/macronix.c | 7 +-
drivers/mtd/nand/spi/toshiba.c | 6 +-
include/linux/mtd/nand.h | 188 +++++-
include/linux/mtd/rawnand.h | 34 +-
include/linux/platform_data/mtd-davinci.h | 9 +-
.../linux/platform_data/mtd-nand-s3c2410.h | 2 +-
93 files changed, 1315 insertions(+), 723 deletions(-)
create mode 100644 drivers/mtd/nand/ecc.c
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 72+ messages in thread
* [PATCH v10 01/20] mtd: rawnand: Add a kernel doc to the ECC algorithm enumeration
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Before moving it to the generic raw NAND core, ensure the enumeration
is properly described.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
include/linux/mtd/rawnand.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 65b1c1c18b41..70b2ddd0aedc 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -92,6 +92,13 @@ enum nand_ecc_mode {
NAND_ECC_ON_DIE,
};
+/**
+ * enum nand_ecc_algo - NAND ECC algorithm
+ * @NAND_ECC_UNKNOWN: Unknown algorithm
+ * @NAND_ECC_HAMMING: Hamming algorithm
+ * @NAND_ECC_BCH: Bose-Chaudhuri-Hocquenghem algorithm
+ * @NAND_ECC_RS: Reed-Solomon algorithm
+ */
enum nand_ecc_algo {
NAND_ECC_UNKNOWN,
NAND_ECC_HAMMING,
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 01/20] mtd: rawnand: Add a kernel doc to the ECC algorithm enumeration
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Before moving it to the generic raw NAND core, ensure the enumeration
is properly described.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
include/linux/mtd/rawnand.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 65b1c1c18b41..70b2ddd0aedc 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -92,6 +92,13 @@ enum nand_ecc_mode {
NAND_ECC_ON_DIE,
};
+/**
+ * enum nand_ecc_algo - NAND ECC algorithm
+ * @NAND_ECC_UNKNOWN: Unknown algorithm
+ * @NAND_ECC_HAMMING: Hamming algorithm
+ * @NAND_ECC_BCH: Bose-Chaudhuri-Hocquenghem algorithm
+ * @NAND_ECC_RS: Reed-Solomon algorithm
+ */
enum nand_ecc_algo {
NAND_ECC_UNKNOWN,
NAND_ECC_HAMMING,
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 01/20] mtd: rawnand: Add a kernel doc to the ECC algorithm enumeration
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Before moving it to the generic raw NAND core, ensure the enumeration
is properly described.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
include/linux/mtd/rawnand.h | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 65b1c1c18b41..70b2ddd0aedc 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -92,6 +92,13 @@ enum nand_ecc_mode {
NAND_ECC_ON_DIE,
};
+/**
+ * enum nand_ecc_algo - NAND ECC algorithm
+ * @NAND_ECC_UNKNOWN: Unknown algorithm
+ * @NAND_ECC_HAMMING: Hamming algorithm
+ * @NAND_ECC_BCH: Bose-Chaudhuri-Hocquenghem algorithm
+ * @NAND_ECC_RS: Reed-Solomon algorithm
+ */
enum nand_ecc_algo {
NAND_ECC_UNKNOWN,
NAND_ECC_HAMMING,
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 02/20] mtd: rawnand: Rename the ECC algorithm enumeration items
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
NAND_ECC_ is not a meaningful prefix, use NAND_ECC_ALGO_ instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
drivers/mtd/nand/raw/ams-delta.c | 2 +-
drivers/mtd/nand/raw/arasan-nand-controller.c | 2 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 2 +-
drivers/mtd/nand/raw/au1550nd.c | 2 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 12 ++++-----
drivers/mtd/nand/raw/davinci_nand.c | 8 +++---
drivers/mtd/nand/raw/fsl_elbc_nand.c | 2 +-
drivers/mtd/nand/raw/fsl_ifc_nand.c | 2 +-
drivers/mtd/nand/raw/fsl_upm.c | 2 +-
drivers/mtd/nand/raw/fsmc_nand.c | 2 +-
drivers/mtd/nand/raw/gpio.c | 2 +-
drivers/mtd/nand/raw/marvell_nand.c | 10 +++----
drivers/mtd/nand/raw/mpc5121_nfc.c | 2 +-
drivers/mtd/nand/raw/mxc_nand.c | 2 +-
drivers/mtd/nand/raw/nand_base.c | 26 +++++++++----------
drivers/mtd/nand/raw/nand_micron.c | 2 +-
drivers/mtd/nand/raw/nandsim.c | 4 +--
drivers/mtd/nand/raw/omap2.c | 2 +-
drivers/mtd/nand/raw/orion_nand.c | 2 +-
drivers/mtd/nand/raw/pasemi_nand.c | 2 +-
drivers/mtd/nand/raw/plat_nand.c | 2 +-
drivers/mtd/nand/raw/s3c2410.c | 4 +--
drivers/mtd/nand/raw/sh_flctl.c | 2 +-
drivers/mtd/nand/raw/socrates_nand.c | 2 +-
drivers/mtd/nand/raw/tango_nand.c | 2 +-
drivers/mtd/nand/raw/tegra_nand.c | 20 +++++++-------
drivers/mtd/nand/raw/xway_nand.c | 2 +-
include/linux/mtd/rawnand.h | 16 ++++++------
28 files changed, 70 insertions(+), 70 deletions(-)
diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 3711e7a0436c..72a44b2411c1 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -261,7 +261,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
}
this->ecc.mode = NAND_ECC_SOFT;
- this->ecc.algo = NAND_ECC_HAMMING;
+ this->ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, priv);
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index 7141dcccba3c..076736351bc6 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -983,7 +983,7 @@ static int anfc_init_hw_ecc_controller(struct arasan_nfc *nfc,
mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
ecc->steps = mtd->writesize / ecc->size;
- ecc->algo = NAND_ECC_BCH;
+ ecc->algo = NAND_ECC_ALGO_BCH;
anand->ecc_bits = bch_gf_mag * ecc->strength;
ecc->bytes = DIV_ROUND_UP(anand->ecc_bits, 8);
anand->ecc_total = DIV_ROUND_UP(anand->ecc_bits * ecc->steps, 8);
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 46a3724a788e..d9839461e460 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1099,7 +1099,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
if (IS_ERR(nand->pmecc))
return PTR_ERR(nand->pmecc);
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.size = req.ecc.sectorsize;
chip->ecc.bytes = req.ecc.bytes / req.ecc.nsectors;
chip->ecc.strength = req.ecc.strength;
diff --git a/drivers/mtd/nand/raw/au1550nd.c b/drivers/mtd/nand/raw/au1550nd.c
index d865200ccd08..ec2d90ad87de 100644
--- a/drivers/mtd/nand/raw/au1550nd.c
+++ b/drivers/mtd/nand/raw/au1550nd.c
@@ -295,7 +295,7 @@ static int au1550nd_probe(struct platform_device *pdev)
ctx->controller.ops = &au1550nd_ops;
this->controller = &ctx->controller;
this->ecc.mode = NAND_ECC_SOFT;
- this->ecc.algo = NAND_ECC_HAMMING;
+ this->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (pd->devwidth)
this->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 4a0a7053fb7a..2a9f2ff89fe7 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2545,17 +2545,17 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
return -EINVAL;
}
- if (chip->ecc.algo == NAND_ECC_UNKNOWN) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN) {
if (chip->ecc.strength == 1 && chip->ecc.size == 512)
/* Default to Hamming for 1-bit ECC, if unspecified */
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
else
/* Otherwise, BCH */
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
}
- if (chip->ecc.algo == NAND_ECC_HAMMING && (chip->ecc.strength != 1 ||
- chip->ecc.size != 512)) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_HAMMING &&
+ (chip->ecc.strength != 1 || chip->ecc.size != 512)) {
dev_err(ctrl->dev, "invalid Hamming params: %d bits per %d bytes\n",
chip->ecc.strength, chip->ecc.size);
return -EINVAL;
@@ -2574,7 +2574,7 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
switch (chip->ecc.size) {
case 512:
- if (chip->ecc.algo == NAND_ECC_HAMMING)
+ if (chip->ecc.algo == NAND_ECC_ALGO_HAMMING)
cfg->ecc_level = 15;
else
cfg->ecc_level = chip->ecc.strength;
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index d975a62caaa5..551515c223bb 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -593,11 +593,11 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
pdata->ecc_bits = 0;
/*
* This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
+ * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
* avoid adding an extra ->ecc_algo field to
* davinci_nand_pdata.
*/
- info->chip.ecc.algo = NAND_ECC_HAMMING;
+ info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
break;
case NAND_ECC_HW:
if (pdata->ecc_bits == 4) {
@@ -629,7 +629,7 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
info->chip.ecc.hwctl = nand_davinci_hwctl_4bit;
info->chip.ecc.bytes = 10;
info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK;
- info->chip.ecc.algo = NAND_ECC_BCH;
+ info->chip.ecc.algo = NAND_ECC_ALGO_BCH;
/*
* Update ECC layout if needed ... for 1-bit HW ECC, the
@@ -656,7 +656,7 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
info->chip.ecc.correct = nand_davinci_correct_1bit;
info->chip.ecc.hwctl = nand_davinci_hwctl_1bit;
info->chip.ecc.bytes = 3;
- info->chip.ecc.algo = NAND_ECC_HAMMING;
+ info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
}
info->chip.ecc.size = 512;
info->chip.ecc.strength = pdata->ecc_bits;
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index 088692b2e27a..da89389faaae 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -748,7 +748,7 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
} else {
/* otherwise fall back to default software ECC */
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
break;
diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index 00ae7a910b03..b2ae759dd14e 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -926,7 +926,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
}
} else {
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
ret = fsl_ifc_sram_init(priv);
diff --git a/drivers/mtd/nand/raw/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c
index 627deb26db51..49592b7e03a3 100644
--- a/drivers/mtd/nand/raw/fsl_upm.c
+++ b/drivers/mtd/nand/raw/fsl_upm.c
@@ -164,7 +164,7 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
fun->chip.legacy.read_buf = fun_read_buf;
fun->chip.legacy.write_buf = fun_write_buf;
fun->chip.ecc.mode = NAND_ECC_SOFT;
- fun->chip.ecc.algo = NAND_ECC_HAMMING;
+ fun->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
if (fun->mchip_count > 1)
fun->chip.legacy.select_chip = fun_select_chip;
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index 3909752b14c5..ced570987e85 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -911,7 +911,7 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
break;
case NAND_ECC_SOFT:
- if (nand->ecc.algo == NAND_ECC_BCH) {
+ if (nand->ecc.algo == NAND_ECC_ALGO_BCH) {
dev_info(host->dev,
"Using 4-bit SW BCH ECC scheme\n");
break;
diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/gpio.c
index 938077e5c6a9..667807c7100b 100644
--- a/drivers/mtd/nand/raw/gpio.c
+++ b/drivers/mtd/nand/raw/gpio.c
@@ -276,7 +276,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
nand_set_flash_node(chip, pdev->dev.of_node);
chip->legacy.IO_ADDR_W = chip->legacy.IO_ADDR_R;
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
chip->options = gpiomtd->plat.options;
chip->legacy.chip_delay = gpiomtd->plat.chip_delay;
chip->legacy.cmd_ctrl = gpio_nand_cmd_ctrl;
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 260a0430313e..3969cca7d925 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -780,7 +780,7 @@ static void marvell_nfc_enable_hw_ecc(struct nand_chip *chip)
* When enabling BCH, set threshold to 0 to always know the
* number of corrected bitflips.
*/
- if (chip->ecc.algo == NAND_ECC_BCH)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
writel_relaxed(NDECCCTRL_BCH_EN, nfc->regs + NDECCCTRL);
}
}
@@ -792,7 +792,7 @@ static void marvell_nfc_disable_hw_ecc(struct nand_chip *chip)
if (ndcr & NDCR_ECC_EN) {
writel_relaxed(ndcr & ~NDCR_ECC_EN, nfc->regs + NDCR);
- if (chip->ecc.algo == NAND_ECC_BCH)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
writel_relaxed(0, nfc->regs + NDECCCTRL);
}
}
@@ -966,7 +966,7 @@ static int marvell_nfc_hw_ecc_check_bitflips(struct nand_chip *chip,
if (ndsr & NDSR_CORERR) {
writel_relaxed(ndsr, nfc->regs + NDSR);
- if (chip->ecc.algo == NAND_ECC_BCH)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
bf = NDSR_ERRCNT(ndsr);
else
bf = 1;
@@ -2215,7 +2215,7 @@ static int marvell_nand_hw_ecc_controller_init(struct mtd_info *mtd,
ecc->size = l->data_bytes;
if (ecc->strength == 1) {
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
ecc->read_page_raw = marvell_nfc_hw_ecc_hmg_read_page_raw;
ecc->read_page = marvell_nfc_hw_ecc_hmg_read_page;
ecc->read_oob_raw = marvell_nfc_hw_ecc_hmg_read_oob_raw;
@@ -2225,7 +2225,7 @@ static int marvell_nand_hw_ecc_controller_init(struct mtd_info *mtd,
ecc->write_oob_raw = marvell_nfc_hw_ecc_hmg_write_oob_raw;
ecc->write_oob = ecc->write_oob_raw;
} else {
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
ecc->strength = 16;
ecc->read_page_raw = marvell_nfc_hw_ecc_bch_read_page_raw;
ecc->read_page = marvell_nfc_hw_ecc_bch_read_page;
diff --git a/drivers/mtd/nand/raw/mpc5121_nfc.c b/drivers/mtd/nand/raw/mpc5121_nfc.c
index 18ecb096a32d..a67eded226db 100644
--- a/drivers/mtd/nand/raw/mpc5121_nfc.c
+++ b/drivers/mtd/nand/raw/mpc5121_nfc.c
@@ -689,7 +689,7 @@ static int mpc5121_nfc_probe(struct platform_device *op)
chip->legacy.get_features = nand_get_set_features_notsupp;
chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Support external chip-select logic on ADS5121 board */
if (of_machine_is_compatible("fsl,mpc5121ads")) {
diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index 09dacb83cb5a..c2e9759cfba8 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -1846,7 +1846,7 @@ static int mxcnd_probe(struct platform_device *pdev)
this->ecc.mode = NAND_ECC_HW;
} else {
this->ecc.mode = NAND_ECC_SOFT;
- this->ecc.algo = NAND_ECC_HAMMING;
+ this->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
/* NAND bus width determines access functions used by upper layer */
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index bd3f5a875e39..3c11525d5054 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5043,9 +5043,9 @@ static int of_get_nand_ecc_mode(struct device_node *np)
}
static const char * const nand_ecc_algos[] = {
- [NAND_ECC_HAMMING] = "hamming",
- [NAND_ECC_BCH] = "bch",
- [NAND_ECC_RS] = "rs",
+ [NAND_ECC_ALGO_HAMMING] = "hamming",
+ [NAND_ECC_ALGO_BCH] = "bch",
+ [NAND_ECC_ALGO_RS] = "rs",
};
static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
@@ -5056,7 +5056,7 @@ static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
err = of_property_read_string(np, "nand-ecc-algo", &pm);
if (!err) {
- for (ecc_algo = NAND_ECC_HAMMING;
+ for (ecc_algo = NAND_ECC_ALGO_HAMMING;
ecc_algo < ARRAY_SIZE(nand_ecc_algos);
ecc_algo++) {
if (!strcasecmp(pm, nand_ecc_algos[ecc_algo]))
@@ -5071,12 +5071,12 @@ static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
err = of_property_read_string(np, "nand-ecc-mode", &pm);
if (!err) {
if (!strcasecmp(pm, "soft"))
- return NAND_ECC_HAMMING;
+ return NAND_ECC_ALGO_HAMMING;
else if (!strcasecmp(pm, "soft_bch"))
- return NAND_ECC_BCH;
+ return NAND_ECC_ALGO_BCH;
}
- return NAND_ECC_UNKNOWN;
+ return NAND_ECC_ALGO_UNKNOWN;
}
static int of_get_nand_ecc_step_size(struct device_node *np)
@@ -5144,7 +5144,7 @@ static int nand_dt_init(struct nand_chip *chip)
if (ecc_mode >= 0)
chip->ecc.mode = ecc_mode;
- if (ecc_algo != NAND_ECC_UNKNOWN)
+ if (ecc_algo != NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = ecc_algo;
if (ecc_strength >= 0)
@@ -5268,7 +5268,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
return -EINVAL;
switch (ecc->algo) {
- case NAND_ECC_HAMMING:
+ case NAND_ECC_ALGO_HAMMING:
ecc->calculate = nand_calculate_ecc;
ecc->correct = nand_correct_data;
ecc->read_page = nand_read_page_swecc;
@@ -5289,7 +5289,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
ecc->options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
return 0;
- case NAND_ECC_BCH:
+ case NAND_ECC_ALGO_BCH:
if (!mtd_nand_has_bch()) {
WARN(1, "CONFIG_MTD_NAND_ECC_SW_BCH not enabled\n");
return -EINVAL;
@@ -5729,7 +5729,7 @@ static int nand_scan_tail(struct nand_chip *chip)
* If no default placement scheme is given, select an appropriate one.
*/
if (!mtd->ooblayout &&
- !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_BCH)) {
+ !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_ALGO_BCH)) {
switch (mtd->oobsize) {
case 8:
case 16:
@@ -5820,7 +5820,7 @@ static int nand_scan_tail(struct nand_chip *chip)
pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
ecc->size, mtd->writesize);
ecc->mode = NAND_ECC_SOFT;
- ecc->algo = NAND_ECC_HAMMING;
+ ecc->algo = NAND_ECC_ALGO_HAMMING;
fallthrough;
case NAND_ECC_SOFT:
ret = nand_set_ecc_soft_ops(chip);
@@ -6077,7 +6077,7 @@ EXPORT_SYMBOL(nand_scan_with_ids);
void nand_cleanup(struct nand_chip *chip)
{
if (chip->ecc.mode == NAND_ECC_SOFT &&
- chip->ecc.algo == NAND_ECC_BCH)
+ chip->ecc.algo == NAND_ECC_ALGO_BCH)
nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
nanddev_cleanup(&chip->base);
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index 3589b4fce0d4..a43b4d17bc69 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -543,7 +543,7 @@ static int micron_nand_init(struct nand_chip *chip)
chip->ecc.bytes = chip->base.eccreq.strength * 2;
chip->ecc.size = 512;
chip->ecc.strength = chip->base.eccreq.strength;
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index 0a5cb77966cc..9bcf1b9d4987 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2235,7 +2235,7 @@ static int ns_attach_chip(struct nand_chip *chip)
}
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.size = 512;
chip->ecc.strength = bch;
chip->ecc.bytes = eccbytes;
@@ -2275,7 +2275,7 @@ static int __init ns_init_module(void)
nand_set_controller_data(chip, (void *)ns);
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
/* and 'badblocks' parameters to work */
chip->options |= NAND_SKIP_BBTSCAN;
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index eb7fcfd9276b..967ddbda1c48 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -2011,7 +2011,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
*/
if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
}
diff --git a/drivers/mtd/nand/raw/orion_nand.c b/drivers/mtd/nand/raw/orion_nand.c
index 880b54ca1b41..7a5cfa3d883f 100644
--- a/drivers/mtd/nand/raw/orion_nand.c
+++ b/drivers/mtd/nand/raw/orion_nand.c
@@ -140,7 +140,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
nc->legacy.cmd_ctrl = orion_nand_cmd_ctrl;
nc->legacy.read_buf = orion_nand_read_buf;
nc->ecc.mode = NAND_ECC_SOFT;
- nc->ecc.algo = NAND_ECC_HAMMING;
+ nc->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (board->chip_delay)
nc->legacy.chip_delay = board->chip_delay;
diff --git a/drivers/mtd/nand/raw/pasemi_nand.c b/drivers/mtd/nand/raw/pasemi_nand.c
index d8eca8c3fdcd..3eddc284614d 100644
--- a/drivers/mtd/nand/raw/pasemi_nand.c
+++ b/drivers/mtd/nand/raw/pasemi_nand.c
@@ -133,7 +133,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
chip->legacy.write_buf = pasemi_write_buf;
chip->legacy.chip_delay = 0;
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Enable the following for a flash based bad block table */
chip->bbt_options = NAND_BBT_USE_FLASH;
diff --git a/drivers/mtd/nand/raw/plat_nand.c b/drivers/mtd/nand/raw/plat_nand.c
index 556182f26057..dbc089c8872f 100644
--- a/drivers/mtd/nand/raw/plat_nand.c
+++ b/drivers/mtd/nand/raw/plat_nand.c
@@ -67,7 +67,7 @@ static int plat_nand_probe(struct platform_device *pdev)
data->chip.bbt_options |= pdata->chip.bbt_options;
data->chip.ecc.mode = NAND_ECC_SOFT;
- data->chip.ecc.algo = NAND_ECC_HAMMING;
+ data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
index f86dff311464..dfe5a0f07385 100644
--- a/drivers/mtd/nand/raw/s3c2410.c
+++ b/drivers/mtd/nand/raw/s3c2410.c
@@ -938,11 +938,11 @@ static int s3c2410_nand_attach_chip(struct nand_chip *chip)
case NAND_ECC_SOFT:
/*
* This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
+ * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
* avoid adding an extra ecc_algo field to
* s3c2410_platform_nand.
*/
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
dev_info(info->device, "soft ECC\n");
break;
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index a661b8bb2dd5..9dbd6fdbe264 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -1045,7 +1045,7 @@ static int flctl_chip_attach_chip(struct nand_chip *chip)
flctl->flcmncr_base |= _4ECCEN;
} else {
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
return 0;
diff --git a/drivers/mtd/nand/raw/socrates_nand.c b/drivers/mtd/nand/raw/socrates_nand.c
index 243b34cfbc1b..72a3a7f98282 100644
--- a/drivers/mtd/nand/raw/socrates_nand.c
+++ b/drivers/mtd/nand/raw/socrates_nand.c
@@ -154,7 +154,7 @@ static int socrates_nand_probe(struct platform_device *ofdev)
nand_chip->legacy.dev_ready = socrates_nand_device_ready;
nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
- nand_chip->ecc.algo = NAND_ECC_HAMMING;
+ nand_chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* TODO: I have no idea what real delay is. */
nand_chip->legacy.chip_delay = 20; /* 20us command delay time */
diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c
index 246871e01027..2154b6f860dd 100644
--- a/drivers/mtd/nand/raw/tango_nand.c
+++ b/drivers/mtd/nand/raw/tango_nand.c
@@ -512,7 +512,7 @@ static int tango_attach_chip(struct nand_chip *chip)
struct nand_ecc_ctrl *ecc = &chip->ecc;
ecc->mode = NAND_ECC_HW;
- ecc->algo = NAND_ECC_BCH;
+ ecc->algo = NAND_ECC_ALGO_BCH;
ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
ecc->read_page_raw = tango_read_page_raw;
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index f9d046b2cd3b..e2e13effc8a6 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -479,7 +479,7 @@ static void tegra_nand_hw_ecc(struct tegra_nand_controller *ctrl,
{
struct tegra_nand_chip *nand = to_tegra_chip(chip);
- if (chip->ecc.algo == NAND_ECC_BCH && enable)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH && enable)
writel_relaxed(nand->bch_config, ctrl->regs + BCH_CONFIG);
else
writel_relaxed(0, ctrl->regs + BCH_CONFIG);
@@ -877,7 +877,7 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
int strength_len, bits_per_step;
switch (chip->ecc.algo) {
- case NAND_ECC_RS:
+ case NAND_ECC_ALGO_RS:
bits_per_step = BITS_PER_STEP_RS;
if (chip->options & NAND_IS_BOOT_MEDIUM) {
strength = rs_strength_bootable;
@@ -887,7 +887,7 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
strength_len = ARRAY_SIZE(rs_strength);
}
break;
- case NAND_ECC_BCH:
+ case NAND_ECC_ALGO_BCH:
bits_per_step = BITS_PER_STEP_BCH;
if (chip->options & NAND_IS_BOOT_MEDIUM) {
strength = bch_strength_bootable;
@@ -935,14 +935,14 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (chip->options & NAND_BUSWIDTH_16)
nand->config |= CONFIG_BUS_WIDTH_16;
- if (chip->ecc.algo == NAND_ECC_UNKNOWN) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN) {
if (mtd->writesize < 2048)
- chip->ecc.algo = NAND_ECC_RS;
+ chip->ecc.algo = NAND_ECC_ALGO_RS;
else
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
}
- if (chip->ecc.algo == NAND_ECC_BCH && mtd->writesize < 2048) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH && mtd->writesize < 2048) {
dev_err(ctrl->dev, "BCH supports 2K or 4K page size only\n");
return -EINVAL;
}
@@ -963,7 +963,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
CONFIG_SKIP_SPARE_SIZE_4;
switch (chip->ecc.algo) {
- case NAND_ECC_RS:
+ case NAND_ECC_ALGO_RS:
bits_per_step = BITS_PER_STEP_RS * chip->ecc.strength;
mtd_set_ooblayout(mtd, &tegra_nand_oob_rs_ops);
nand->config_ecc |= CONFIG_HW_ECC | CONFIG_ECC_SEL |
@@ -984,7 +984,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
return -EINVAL;
}
break;
- case NAND_ECC_BCH:
+ case NAND_ECC_ALGO_BCH:
bits_per_step = BITS_PER_STEP_BCH * chip->ecc.strength;
mtd_set_ooblayout(mtd, &tegra_nand_oob_bch_ops);
nand->bch_config = BCH_ENABLE;
@@ -1013,7 +1013,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
}
dev_info(ctrl->dev, "Using %s with strength %d per 512 byte step\n",
- chip->ecc.algo == NAND_ECC_BCH ? "BCH" : "RS",
+ chip->ecc.algo == NAND_ECC_ALGO_BCH ? "BCH" : "RS",
chip->ecc.strength);
chip->ecc.bytes = DIV_ROUND_UP(bits_per_step, BITS_PER_BYTE);
diff --git a/drivers/mtd/nand/raw/xway_nand.c b/drivers/mtd/nand/raw/xway_nand.c
index 94bfba994326..909072e82a68 100644
--- a/drivers/mtd/nand/raw/xway_nand.c
+++ b/drivers/mtd/nand/raw/xway_nand.c
@@ -181,7 +181,7 @@ static int xway_nand_probe(struct platform_device *pdev)
data->chip.legacy.chip_delay = 30;
data->chip.ecc.mode = NAND_ECC_SOFT;
- data->chip.ecc.algo = NAND_ECC_HAMMING;
+ data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
nand_set_controller_data(&data->chip, data);
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 70b2ddd0aedc..cf49aa678920 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -94,16 +94,16 @@ enum nand_ecc_mode {
/**
* enum nand_ecc_algo - NAND ECC algorithm
- * @NAND_ECC_UNKNOWN: Unknown algorithm
- * @NAND_ECC_HAMMING: Hamming algorithm
- * @NAND_ECC_BCH: Bose-Chaudhuri-Hocquenghem algorithm
- * @NAND_ECC_RS: Reed-Solomon algorithm
+ * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
+ * @NAND_ECC_ALGO_HAMMING: Hamming algorithm
+ * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm
+ * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm
*/
enum nand_ecc_algo {
- NAND_ECC_UNKNOWN,
- NAND_ECC_HAMMING,
- NAND_ECC_BCH,
- NAND_ECC_RS,
+ NAND_ECC_ALGO_UNKNOWN,
+ NAND_ECC_ALGO_HAMMING,
+ NAND_ECC_ALGO_BCH,
+ NAND_ECC_ALGO_RS,
};
/*
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 02/20] mtd: rawnand: Rename the ECC algorithm enumeration items
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
NAND_ECC_ is not a meaningful prefix, use NAND_ECC_ALGO_ instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
drivers/mtd/nand/raw/ams-delta.c | 2 +-
drivers/mtd/nand/raw/arasan-nand-controller.c | 2 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 2 +-
drivers/mtd/nand/raw/au1550nd.c | 2 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 12 ++++-----
drivers/mtd/nand/raw/davinci_nand.c | 8 +++---
drivers/mtd/nand/raw/fsl_elbc_nand.c | 2 +-
drivers/mtd/nand/raw/fsl_ifc_nand.c | 2 +-
drivers/mtd/nand/raw/fsl_upm.c | 2 +-
drivers/mtd/nand/raw/fsmc_nand.c | 2 +-
drivers/mtd/nand/raw/gpio.c | 2 +-
drivers/mtd/nand/raw/marvell_nand.c | 10 +++----
drivers/mtd/nand/raw/mpc5121_nfc.c | 2 +-
drivers/mtd/nand/raw/mxc_nand.c | 2 +-
drivers/mtd/nand/raw/nand_base.c | 26 +++++++++----------
drivers/mtd/nand/raw/nand_micron.c | 2 +-
drivers/mtd/nand/raw/nandsim.c | 4 +--
drivers/mtd/nand/raw/omap2.c | 2 +-
drivers/mtd/nand/raw/orion_nand.c | 2 +-
drivers/mtd/nand/raw/pasemi_nand.c | 2 +-
drivers/mtd/nand/raw/plat_nand.c | 2 +-
drivers/mtd/nand/raw/s3c2410.c | 4 +--
drivers/mtd/nand/raw/sh_flctl.c | 2 +-
drivers/mtd/nand/raw/socrates_nand.c | 2 +-
drivers/mtd/nand/raw/tango_nand.c | 2 +-
drivers/mtd/nand/raw/tegra_nand.c | 20 +++++++-------
drivers/mtd/nand/raw/xway_nand.c | 2 +-
include/linux/mtd/rawnand.h | 16 ++++++------
28 files changed, 70 insertions(+), 70 deletions(-)
diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 3711e7a0436c..72a44b2411c1 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -261,7 +261,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
}
this->ecc.mode = NAND_ECC_SOFT;
- this->ecc.algo = NAND_ECC_HAMMING;
+ this->ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, priv);
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index 7141dcccba3c..076736351bc6 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -983,7 +983,7 @@ static int anfc_init_hw_ecc_controller(struct arasan_nfc *nfc,
mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
ecc->steps = mtd->writesize / ecc->size;
- ecc->algo = NAND_ECC_BCH;
+ ecc->algo = NAND_ECC_ALGO_BCH;
anand->ecc_bits = bch_gf_mag * ecc->strength;
ecc->bytes = DIV_ROUND_UP(anand->ecc_bits, 8);
anand->ecc_total = DIV_ROUND_UP(anand->ecc_bits * ecc->steps, 8);
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 46a3724a788e..d9839461e460 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1099,7 +1099,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
if (IS_ERR(nand->pmecc))
return PTR_ERR(nand->pmecc);
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.size = req.ecc.sectorsize;
chip->ecc.bytes = req.ecc.bytes / req.ecc.nsectors;
chip->ecc.strength = req.ecc.strength;
diff --git a/drivers/mtd/nand/raw/au1550nd.c b/drivers/mtd/nand/raw/au1550nd.c
index d865200ccd08..ec2d90ad87de 100644
--- a/drivers/mtd/nand/raw/au1550nd.c
+++ b/drivers/mtd/nand/raw/au1550nd.c
@@ -295,7 +295,7 @@ static int au1550nd_probe(struct platform_device *pdev)
ctx->controller.ops = &au1550nd_ops;
this->controller = &ctx->controller;
this->ecc.mode = NAND_ECC_SOFT;
- this->ecc.algo = NAND_ECC_HAMMING;
+ this->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (pd->devwidth)
this->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 4a0a7053fb7a..2a9f2ff89fe7 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2545,17 +2545,17 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
return -EINVAL;
}
- if (chip->ecc.algo == NAND_ECC_UNKNOWN) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN) {
if (chip->ecc.strength == 1 && chip->ecc.size == 512)
/* Default to Hamming for 1-bit ECC, if unspecified */
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
else
/* Otherwise, BCH */
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
}
- if (chip->ecc.algo == NAND_ECC_HAMMING && (chip->ecc.strength != 1 ||
- chip->ecc.size != 512)) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_HAMMING &&
+ (chip->ecc.strength != 1 || chip->ecc.size != 512)) {
dev_err(ctrl->dev, "invalid Hamming params: %d bits per %d bytes\n",
chip->ecc.strength, chip->ecc.size);
return -EINVAL;
@@ -2574,7 +2574,7 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
switch (chip->ecc.size) {
case 512:
- if (chip->ecc.algo == NAND_ECC_HAMMING)
+ if (chip->ecc.algo == NAND_ECC_ALGO_HAMMING)
cfg->ecc_level = 15;
else
cfg->ecc_level = chip->ecc.strength;
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index d975a62caaa5..551515c223bb 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -593,11 +593,11 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
pdata->ecc_bits = 0;
/*
* This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
+ * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
* avoid adding an extra ->ecc_algo field to
* davinci_nand_pdata.
*/
- info->chip.ecc.algo = NAND_ECC_HAMMING;
+ info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
break;
case NAND_ECC_HW:
if (pdata->ecc_bits == 4) {
@@ -629,7 +629,7 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
info->chip.ecc.hwctl = nand_davinci_hwctl_4bit;
info->chip.ecc.bytes = 10;
info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK;
- info->chip.ecc.algo = NAND_ECC_BCH;
+ info->chip.ecc.algo = NAND_ECC_ALGO_BCH;
/*
* Update ECC layout if needed ... for 1-bit HW ECC, the
@@ -656,7 +656,7 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
info->chip.ecc.correct = nand_davinci_correct_1bit;
info->chip.ecc.hwctl = nand_davinci_hwctl_1bit;
info->chip.ecc.bytes = 3;
- info->chip.ecc.algo = NAND_ECC_HAMMING;
+ info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
}
info->chip.ecc.size = 512;
info->chip.ecc.strength = pdata->ecc_bits;
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index 088692b2e27a..da89389faaae 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -748,7 +748,7 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
} else {
/* otherwise fall back to default software ECC */
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
break;
diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index 00ae7a910b03..b2ae759dd14e 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -926,7 +926,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
}
} else {
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
ret = fsl_ifc_sram_init(priv);
diff --git a/drivers/mtd/nand/raw/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c
index 627deb26db51..49592b7e03a3 100644
--- a/drivers/mtd/nand/raw/fsl_upm.c
+++ b/drivers/mtd/nand/raw/fsl_upm.c
@@ -164,7 +164,7 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
fun->chip.legacy.read_buf = fun_read_buf;
fun->chip.legacy.write_buf = fun_write_buf;
fun->chip.ecc.mode = NAND_ECC_SOFT;
- fun->chip.ecc.algo = NAND_ECC_HAMMING;
+ fun->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
if (fun->mchip_count > 1)
fun->chip.legacy.select_chip = fun_select_chip;
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index 3909752b14c5..ced570987e85 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -911,7 +911,7 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
break;
case NAND_ECC_SOFT:
- if (nand->ecc.algo == NAND_ECC_BCH) {
+ if (nand->ecc.algo == NAND_ECC_ALGO_BCH) {
dev_info(host->dev,
"Using 4-bit SW BCH ECC scheme\n");
break;
diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/gpio.c
index 938077e5c6a9..667807c7100b 100644
--- a/drivers/mtd/nand/raw/gpio.c
+++ b/drivers/mtd/nand/raw/gpio.c
@@ -276,7 +276,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
nand_set_flash_node(chip, pdev->dev.of_node);
chip->legacy.IO_ADDR_W = chip->legacy.IO_ADDR_R;
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
chip->options = gpiomtd->plat.options;
chip->legacy.chip_delay = gpiomtd->plat.chip_delay;
chip->legacy.cmd_ctrl = gpio_nand_cmd_ctrl;
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 260a0430313e..3969cca7d925 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -780,7 +780,7 @@ static void marvell_nfc_enable_hw_ecc(struct nand_chip *chip)
* When enabling BCH, set threshold to 0 to always know the
* number of corrected bitflips.
*/
- if (chip->ecc.algo == NAND_ECC_BCH)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
writel_relaxed(NDECCCTRL_BCH_EN, nfc->regs + NDECCCTRL);
}
}
@@ -792,7 +792,7 @@ static void marvell_nfc_disable_hw_ecc(struct nand_chip *chip)
if (ndcr & NDCR_ECC_EN) {
writel_relaxed(ndcr & ~NDCR_ECC_EN, nfc->regs + NDCR);
- if (chip->ecc.algo == NAND_ECC_BCH)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
writel_relaxed(0, nfc->regs + NDECCCTRL);
}
}
@@ -966,7 +966,7 @@ static int marvell_nfc_hw_ecc_check_bitflips(struct nand_chip *chip,
if (ndsr & NDSR_CORERR) {
writel_relaxed(ndsr, nfc->regs + NDSR);
- if (chip->ecc.algo == NAND_ECC_BCH)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
bf = NDSR_ERRCNT(ndsr);
else
bf = 1;
@@ -2215,7 +2215,7 @@ static int marvell_nand_hw_ecc_controller_init(struct mtd_info *mtd,
ecc->size = l->data_bytes;
if (ecc->strength == 1) {
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
ecc->read_page_raw = marvell_nfc_hw_ecc_hmg_read_page_raw;
ecc->read_page = marvell_nfc_hw_ecc_hmg_read_page;
ecc->read_oob_raw = marvell_nfc_hw_ecc_hmg_read_oob_raw;
@@ -2225,7 +2225,7 @@ static int marvell_nand_hw_ecc_controller_init(struct mtd_info *mtd,
ecc->write_oob_raw = marvell_nfc_hw_ecc_hmg_write_oob_raw;
ecc->write_oob = ecc->write_oob_raw;
} else {
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
ecc->strength = 16;
ecc->read_page_raw = marvell_nfc_hw_ecc_bch_read_page_raw;
ecc->read_page = marvell_nfc_hw_ecc_bch_read_page;
diff --git a/drivers/mtd/nand/raw/mpc5121_nfc.c b/drivers/mtd/nand/raw/mpc5121_nfc.c
index 18ecb096a32d..a67eded226db 100644
--- a/drivers/mtd/nand/raw/mpc5121_nfc.c
+++ b/drivers/mtd/nand/raw/mpc5121_nfc.c
@@ -689,7 +689,7 @@ static int mpc5121_nfc_probe(struct platform_device *op)
chip->legacy.get_features = nand_get_set_features_notsupp;
chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Support external chip-select logic on ADS5121 board */
if (of_machine_is_compatible("fsl,mpc5121ads")) {
diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index 09dacb83cb5a..c2e9759cfba8 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -1846,7 +1846,7 @@ static int mxcnd_probe(struct platform_device *pdev)
this->ecc.mode = NAND_ECC_HW;
} else {
this->ecc.mode = NAND_ECC_SOFT;
- this->ecc.algo = NAND_ECC_HAMMING;
+ this->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
/* NAND bus width determines access functions used by upper layer */
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index bd3f5a875e39..3c11525d5054 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5043,9 +5043,9 @@ static int of_get_nand_ecc_mode(struct device_node *np)
}
static const char * const nand_ecc_algos[] = {
- [NAND_ECC_HAMMING] = "hamming",
- [NAND_ECC_BCH] = "bch",
- [NAND_ECC_RS] = "rs",
+ [NAND_ECC_ALGO_HAMMING] = "hamming",
+ [NAND_ECC_ALGO_BCH] = "bch",
+ [NAND_ECC_ALGO_RS] = "rs",
};
static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
@@ -5056,7 +5056,7 @@ static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
err = of_property_read_string(np, "nand-ecc-algo", &pm);
if (!err) {
- for (ecc_algo = NAND_ECC_HAMMING;
+ for (ecc_algo = NAND_ECC_ALGO_HAMMING;
ecc_algo < ARRAY_SIZE(nand_ecc_algos);
ecc_algo++) {
if (!strcasecmp(pm, nand_ecc_algos[ecc_algo]))
@@ -5071,12 +5071,12 @@ static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
err = of_property_read_string(np, "nand-ecc-mode", &pm);
if (!err) {
if (!strcasecmp(pm, "soft"))
- return NAND_ECC_HAMMING;
+ return NAND_ECC_ALGO_HAMMING;
else if (!strcasecmp(pm, "soft_bch"))
- return NAND_ECC_BCH;
+ return NAND_ECC_ALGO_BCH;
}
- return NAND_ECC_UNKNOWN;
+ return NAND_ECC_ALGO_UNKNOWN;
}
static int of_get_nand_ecc_step_size(struct device_node *np)
@@ -5144,7 +5144,7 @@ static int nand_dt_init(struct nand_chip *chip)
if (ecc_mode >= 0)
chip->ecc.mode = ecc_mode;
- if (ecc_algo != NAND_ECC_UNKNOWN)
+ if (ecc_algo != NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = ecc_algo;
if (ecc_strength >= 0)
@@ -5268,7 +5268,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
return -EINVAL;
switch (ecc->algo) {
- case NAND_ECC_HAMMING:
+ case NAND_ECC_ALGO_HAMMING:
ecc->calculate = nand_calculate_ecc;
ecc->correct = nand_correct_data;
ecc->read_page = nand_read_page_swecc;
@@ -5289,7 +5289,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
ecc->options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
return 0;
- case NAND_ECC_BCH:
+ case NAND_ECC_ALGO_BCH:
if (!mtd_nand_has_bch()) {
WARN(1, "CONFIG_MTD_NAND_ECC_SW_BCH not enabled\n");
return -EINVAL;
@@ -5729,7 +5729,7 @@ static int nand_scan_tail(struct nand_chip *chip)
* If no default placement scheme is given, select an appropriate one.
*/
if (!mtd->ooblayout &&
- !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_BCH)) {
+ !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_ALGO_BCH)) {
switch (mtd->oobsize) {
case 8:
case 16:
@@ -5820,7 +5820,7 @@ static int nand_scan_tail(struct nand_chip *chip)
pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
ecc->size, mtd->writesize);
ecc->mode = NAND_ECC_SOFT;
- ecc->algo = NAND_ECC_HAMMING;
+ ecc->algo = NAND_ECC_ALGO_HAMMING;
fallthrough;
case NAND_ECC_SOFT:
ret = nand_set_ecc_soft_ops(chip);
@@ -6077,7 +6077,7 @@ EXPORT_SYMBOL(nand_scan_with_ids);
void nand_cleanup(struct nand_chip *chip)
{
if (chip->ecc.mode == NAND_ECC_SOFT &&
- chip->ecc.algo == NAND_ECC_BCH)
+ chip->ecc.algo == NAND_ECC_ALGO_BCH)
nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
nanddev_cleanup(&chip->base);
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index 3589b4fce0d4..a43b4d17bc69 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -543,7 +543,7 @@ static int micron_nand_init(struct nand_chip *chip)
chip->ecc.bytes = chip->base.eccreq.strength * 2;
chip->ecc.size = 512;
chip->ecc.strength = chip->base.eccreq.strength;
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index 0a5cb77966cc..9bcf1b9d4987 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2235,7 +2235,7 @@ static int ns_attach_chip(struct nand_chip *chip)
}
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.size = 512;
chip->ecc.strength = bch;
chip->ecc.bytes = eccbytes;
@@ -2275,7 +2275,7 @@ static int __init ns_init_module(void)
nand_set_controller_data(chip, (void *)ns);
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
/* and 'badblocks' parameters to work */
chip->options |= NAND_SKIP_BBTSCAN;
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index eb7fcfd9276b..967ddbda1c48 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -2011,7 +2011,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
*/
if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
}
diff --git a/drivers/mtd/nand/raw/orion_nand.c b/drivers/mtd/nand/raw/orion_nand.c
index 880b54ca1b41..7a5cfa3d883f 100644
--- a/drivers/mtd/nand/raw/orion_nand.c
+++ b/drivers/mtd/nand/raw/orion_nand.c
@@ -140,7 +140,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
nc->legacy.cmd_ctrl = orion_nand_cmd_ctrl;
nc->legacy.read_buf = orion_nand_read_buf;
nc->ecc.mode = NAND_ECC_SOFT;
- nc->ecc.algo = NAND_ECC_HAMMING;
+ nc->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (board->chip_delay)
nc->legacy.chip_delay = board->chip_delay;
diff --git a/drivers/mtd/nand/raw/pasemi_nand.c b/drivers/mtd/nand/raw/pasemi_nand.c
index d8eca8c3fdcd..3eddc284614d 100644
--- a/drivers/mtd/nand/raw/pasemi_nand.c
+++ b/drivers/mtd/nand/raw/pasemi_nand.c
@@ -133,7 +133,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
chip->legacy.write_buf = pasemi_write_buf;
chip->legacy.chip_delay = 0;
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Enable the following for a flash based bad block table */
chip->bbt_options = NAND_BBT_USE_FLASH;
diff --git a/drivers/mtd/nand/raw/plat_nand.c b/drivers/mtd/nand/raw/plat_nand.c
index 556182f26057..dbc089c8872f 100644
--- a/drivers/mtd/nand/raw/plat_nand.c
+++ b/drivers/mtd/nand/raw/plat_nand.c
@@ -67,7 +67,7 @@ static int plat_nand_probe(struct platform_device *pdev)
data->chip.bbt_options |= pdata->chip.bbt_options;
data->chip.ecc.mode = NAND_ECC_SOFT;
- data->chip.ecc.algo = NAND_ECC_HAMMING;
+ data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
index f86dff311464..dfe5a0f07385 100644
--- a/drivers/mtd/nand/raw/s3c2410.c
+++ b/drivers/mtd/nand/raw/s3c2410.c
@@ -938,11 +938,11 @@ static int s3c2410_nand_attach_chip(struct nand_chip *chip)
case NAND_ECC_SOFT:
/*
* This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
+ * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
* avoid adding an extra ecc_algo field to
* s3c2410_platform_nand.
*/
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
dev_info(info->device, "soft ECC\n");
break;
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index a661b8bb2dd5..9dbd6fdbe264 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -1045,7 +1045,7 @@ static int flctl_chip_attach_chip(struct nand_chip *chip)
flctl->flcmncr_base |= _4ECCEN;
} else {
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
return 0;
diff --git a/drivers/mtd/nand/raw/socrates_nand.c b/drivers/mtd/nand/raw/socrates_nand.c
index 243b34cfbc1b..72a3a7f98282 100644
--- a/drivers/mtd/nand/raw/socrates_nand.c
+++ b/drivers/mtd/nand/raw/socrates_nand.c
@@ -154,7 +154,7 @@ static int socrates_nand_probe(struct platform_device *ofdev)
nand_chip->legacy.dev_ready = socrates_nand_device_ready;
nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
- nand_chip->ecc.algo = NAND_ECC_HAMMING;
+ nand_chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* TODO: I have no idea what real delay is. */
nand_chip->legacy.chip_delay = 20; /* 20us command delay time */
diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c
index 246871e01027..2154b6f860dd 100644
--- a/drivers/mtd/nand/raw/tango_nand.c
+++ b/drivers/mtd/nand/raw/tango_nand.c
@@ -512,7 +512,7 @@ static int tango_attach_chip(struct nand_chip *chip)
struct nand_ecc_ctrl *ecc = &chip->ecc;
ecc->mode = NAND_ECC_HW;
- ecc->algo = NAND_ECC_BCH;
+ ecc->algo = NAND_ECC_ALGO_BCH;
ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
ecc->read_page_raw = tango_read_page_raw;
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index f9d046b2cd3b..e2e13effc8a6 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -479,7 +479,7 @@ static void tegra_nand_hw_ecc(struct tegra_nand_controller *ctrl,
{
struct tegra_nand_chip *nand = to_tegra_chip(chip);
- if (chip->ecc.algo == NAND_ECC_BCH && enable)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH && enable)
writel_relaxed(nand->bch_config, ctrl->regs + BCH_CONFIG);
else
writel_relaxed(0, ctrl->regs + BCH_CONFIG);
@@ -877,7 +877,7 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
int strength_len, bits_per_step;
switch (chip->ecc.algo) {
- case NAND_ECC_RS:
+ case NAND_ECC_ALGO_RS:
bits_per_step = BITS_PER_STEP_RS;
if (chip->options & NAND_IS_BOOT_MEDIUM) {
strength = rs_strength_bootable;
@@ -887,7 +887,7 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
strength_len = ARRAY_SIZE(rs_strength);
}
break;
- case NAND_ECC_BCH:
+ case NAND_ECC_ALGO_BCH:
bits_per_step = BITS_PER_STEP_BCH;
if (chip->options & NAND_IS_BOOT_MEDIUM) {
strength = bch_strength_bootable;
@@ -935,14 +935,14 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (chip->options & NAND_BUSWIDTH_16)
nand->config |= CONFIG_BUS_WIDTH_16;
- if (chip->ecc.algo == NAND_ECC_UNKNOWN) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN) {
if (mtd->writesize < 2048)
- chip->ecc.algo = NAND_ECC_RS;
+ chip->ecc.algo = NAND_ECC_ALGO_RS;
else
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
}
- if (chip->ecc.algo == NAND_ECC_BCH && mtd->writesize < 2048) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH && mtd->writesize < 2048) {
dev_err(ctrl->dev, "BCH supports 2K or 4K page size only\n");
return -EINVAL;
}
@@ -963,7 +963,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
CONFIG_SKIP_SPARE_SIZE_4;
switch (chip->ecc.algo) {
- case NAND_ECC_RS:
+ case NAND_ECC_ALGO_RS:
bits_per_step = BITS_PER_STEP_RS * chip->ecc.strength;
mtd_set_ooblayout(mtd, &tegra_nand_oob_rs_ops);
nand->config_ecc |= CONFIG_HW_ECC | CONFIG_ECC_SEL |
@@ -984,7 +984,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
return -EINVAL;
}
break;
- case NAND_ECC_BCH:
+ case NAND_ECC_ALGO_BCH:
bits_per_step = BITS_PER_STEP_BCH * chip->ecc.strength;
mtd_set_ooblayout(mtd, &tegra_nand_oob_bch_ops);
nand->bch_config = BCH_ENABLE;
@@ -1013,7 +1013,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
}
dev_info(ctrl->dev, "Using %s with strength %d per 512 byte step\n",
- chip->ecc.algo == NAND_ECC_BCH ? "BCH" : "RS",
+ chip->ecc.algo == NAND_ECC_ALGO_BCH ? "BCH" : "RS",
chip->ecc.strength);
chip->ecc.bytes = DIV_ROUND_UP(bits_per_step, BITS_PER_BYTE);
diff --git a/drivers/mtd/nand/raw/xway_nand.c b/drivers/mtd/nand/raw/xway_nand.c
index 94bfba994326..909072e82a68 100644
--- a/drivers/mtd/nand/raw/xway_nand.c
+++ b/drivers/mtd/nand/raw/xway_nand.c
@@ -181,7 +181,7 @@ static int xway_nand_probe(struct platform_device *pdev)
data->chip.legacy.chip_delay = 30;
data->chip.ecc.mode = NAND_ECC_SOFT;
- data->chip.ecc.algo = NAND_ECC_HAMMING;
+ data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
nand_set_controller_data(&data->chip, data);
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 70b2ddd0aedc..cf49aa678920 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -94,16 +94,16 @@ enum nand_ecc_mode {
/**
* enum nand_ecc_algo - NAND ECC algorithm
- * @NAND_ECC_UNKNOWN: Unknown algorithm
- * @NAND_ECC_HAMMING: Hamming algorithm
- * @NAND_ECC_BCH: Bose-Chaudhuri-Hocquenghem algorithm
- * @NAND_ECC_RS: Reed-Solomon algorithm
+ * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
+ * @NAND_ECC_ALGO_HAMMING: Hamming algorithm
+ * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm
+ * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm
*/
enum nand_ecc_algo {
- NAND_ECC_UNKNOWN,
- NAND_ECC_HAMMING,
- NAND_ECC_BCH,
- NAND_ECC_RS,
+ NAND_ECC_ALGO_UNKNOWN,
+ NAND_ECC_ALGO_HAMMING,
+ NAND_ECC_ALGO_BCH,
+ NAND_ECC_ALGO_RS,
};
/*
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 02/20] mtd: rawnand: Rename the ECC algorithm enumeration items
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
NAND_ECC_ is not a meaningful prefix, use NAND_ECC_ALGO_ instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
drivers/mtd/nand/raw/ams-delta.c | 2 +-
drivers/mtd/nand/raw/arasan-nand-controller.c | 2 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 2 +-
drivers/mtd/nand/raw/au1550nd.c | 2 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 12 ++++-----
drivers/mtd/nand/raw/davinci_nand.c | 8 +++---
drivers/mtd/nand/raw/fsl_elbc_nand.c | 2 +-
drivers/mtd/nand/raw/fsl_ifc_nand.c | 2 +-
drivers/mtd/nand/raw/fsl_upm.c | 2 +-
drivers/mtd/nand/raw/fsmc_nand.c | 2 +-
drivers/mtd/nand/raw/gpio.c | 2 +-
drivers/mtd/nand/raw/marvell_nand.c | 10 +++----
drivers/mtd/nand/raw/mpc5121_nfc.c | 2 +-
drivers/mtd/nand/raw/mxc_nand.c | 2 +-
drivers/mtd/nand/raw/nand_base.c | 26 +++++++++----------
drivers/mtd/nand/raw/nand_micron.c | 2 +-
drivers/mtd/nand/raw/nandsim.c | 4 +--
drivers/mtd/nand/raw/omap2.c | 2 +-
drivers/mtd/nand/raw/orion_nand.c | 2 +-
drivers/mtd/nand/raw/pasemi_nand.c | 2 +-
drivers/mtd/nand/raw/plat_nand.c | 2 +-
drivers/mtd/nand/raw/s3c2410.c | 4 +--
drivers/mtd/nand/raw/sh_flctl.c | 2 +-
drivers/mtd/nand/raw/socrates_nand.c | 2 +-
drivers/mtd/nand/raw/tango_nand.c | 2 +-
drivers/mtd/nand/raw/tegra_nand.c | 20 +++++++-------
drivers/mtd/nand/raw/xway_nand.c | 2 +-
include/linux/mtd/rawnand.h | 16 ++++++------
28 files changed, 70 insertions(+), 70 deletions(-)
diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 3711e7a0436c..72a44b2411c1 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -261,7 +261,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
}
this->ecc.mode = NAND_ECC_SOFT;
- this->ecc.algo = NAND_ECC_HAMMING;
+ this->ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, priv);
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index 7141dcccba3c..076736351bc6 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -983,7 +983,7 @@ static int anfc_init_hw_ecc_controller(struct arasan_nfc *nfc,
mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
ecc->steps = mtd->writesize / ecc->size;
- ecc->algo = NAND_ECC_BCH;
+ ecc->algo = NAND_ECC_ALGO_BCH;
anand->ecc_bits = bch_gf_mag * ecc->strength;
ecc->bytes = DIV_ROUND_UP(anand->ecc_bits, 8);
anand->ecc_total = DIV_ROUND_UP(anand->ecc_bits * ecc->steps, 8);
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 46a3724a788e..d9839461e460 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1099,7 +1099,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
if (IS_ERR(nand->pmecc))
return PTR_ERR(nand->pmecc);
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.size = req.ecc.sectorsize;
chip->ecc.bytes = req.ecc.bytes / req.ecc.nsectors;
chip->ecc.strength = req.ecc.strength;
diff --git a/drivers/mtd/nand/raw/au1550nd.c b/drivers/mtd/nand/raw/au1550nd.c
index d865200ccd08..ec2d90ad87de 100644
--- a/drivers/mtd/nand/raw/au1550nd.c
+++ b/drivers/mtd/nand/raw/au1550nd.c
@@ -295,7 +295,7 @@ static int au1550nd_probe(struct platform_device *pdev)
ctx->controller.ops = &au1550nd_ops;
this->controller = &ctx->controller;
this->ecc.mode = NAND_ECC_SOFT;
- this->ecc.algo = NAND_ECC_HAMMING;
+ this->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (pd->devwidth)
this->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 4a0a7053fb7a..2a9f2ff89fe7 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2545,17 +2545,17 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
return -EINVAL;
}
- if (chip->ecc.algo == NAND_ECC_UNKNOWN) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN) {
if (chip->ecc.strength == 1 && chip->ecc.size == 512)
/* Default to Hamming for 1-bit ECC, if unspecified */
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
else
/* Otherwise, BCH */
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
}
- if (chip->ecc.algo == NAND_ECC_HAMMING && (chip->ecc.strength != 1 ||
- chip->ecc.size != 512)) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_HAMMING &&
+ (chip->ecc.strength != 1 || chip->ecc.size != 512)) {
dev_err(ctrl->dev, "invalid Hamming params: %d bits per %d bytes\n",
chip->ecc.strength, chip->ecc.size);
return -EINVAL;
@@ -2574,7 +2574,7 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
switch (chip->ecc.size) {
case 512:
- if (chip->ecc.algo == NAND_ECC_HAMMING)
+ if (chip->ecc.algo == NAND_ECC_ALGO_HAMMING)
cfg->ecc_level = 15;
else
cfg->ecc_level = chip->ecc.strength;
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index d975a62caaa5..551515c223bb 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -593,11 +593,11 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
pdata->ecc_bits = 0;
/*
* This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
+ * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
* avoid adding an extra ->ecc_algo field to
* davinci_nand_pdata.
*/
- info->chip.ecc.algo = NAND_ECC_HAMMING;
+ info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
break;
case NAND_ECC_HW:
if (pdata->ecc_bits == 4) {
@@ -629,7 +629,7 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
info->chip.ecc.hwctl = nand_davinci_hwctl_4bit;
info->chip.ecc.bytes = 10;
info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK;
- info->chip.ecc.algo = NAND_ECC_BCH;
+ info->chip.ecc.algo = NAND_ECC_ALGO_BCH;
/*
* Update ECC layout if needed ... for 1-bit HW ECC, the
@@ -656,7 +656,7 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
info->chip.ecc.correct = nand_davinci_correct_1bit;
info->chip.ecc.hwctl = nand_davinci_hwctl_1bit;
info->chip.ecc.bytes = 3;
- info->chip.ecc.algo = NAND_ECC_HAMMING;
+ info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
}
info->chip.ecc.size = 512;
info->chip.ecc.strength = pdata->ecc_bits;
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index 088692b2e27a..da89389faaae 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -748,7 +748,7 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
} else {
/* otherwise fall back to default software ECC */
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
break;
diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index 00ae7a910b03..b2ae759dd14e 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -926,7 +926,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
}
} else {
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
ret = fsl_ifc_sram_init(priv);
diff --git a/drivers/mtd/nand/raw/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c
index 627deb26db51..49592b7e03a3 100644
--- a/drivers/mtd/nand/raw/fsl_upm.c
+++ b/drivers/mtd/nand/raw/fsl_upm.c
@@ -164,7 +164,7 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
fun->chip.legacy.read_buf = fun_read_buf;
fun->chip.legacy.write_buf = fun_write_buf;
fun->chip.ecc.mode = NAND_ECC_SOFT;
- fun->chip.ecc.algo = NAND_ECC_HAMMING;
+ fun->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
if (fun->mchip_count > 1)
fun->chip.legacy.select_chip = fun_select_chip;
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index 3909752b14c5..ced570987e85 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -911,7 +911,7 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
break;
case NAND_ECC_SOFT:
- if (nand->ecc.algo == NAND_ECC_BCH) {
+ if (nand->ecc.algo == NAND_ECC_ALGO_BCH) {
dev_info(host->dev,
"Using 4-bit SW BCH ECC scheme\n");
break;
diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/gpio.c
index 938077e5c6a9..667807c7100b 100644
--- a/drivers/mtd/nand/raw/gpio.c
+++ b/drivers/mtd/nand/raw/gpio.c
@@ -276,7 +276,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
nand_set_flash_node(chip, pdev->dev.of_node);
chip->legacy.IO_ADDR_W = chip->legacy.IO_ADDR_R;
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
chip->options = gpiomtd->plat.options;
chip->legacy.chip_delay = gpiomtd->plat.chip_delay;
chip->legacy.cmd_ctrl = gpio_nand_cmd_ctrl;
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 260a0430313e..3969cca7d925 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -780,7 +780,7 @@ static void marvell_nfc_enable_hw_ecc(struct nand_chip *chip)
* When enabling BCH, set threshold to 0 to always know the
* number of corrected bitflips.
*/
- if (chip->ecc.algo == NAND_ECC_BCH)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
writel_relaxed(NDECCCTRL_BCH_EN, nfc->regs + NDECCCTRL);
}
}
@@ -792,7 +792,7 @@ static void marvell_nfc_disable_hw_ecc(struct nand_chip *chip)
if (ndcr & NDCR_ECC_EN) {
writel_relaxed(ndcr & ~NDCR_ECC_EN, nfc->regs + NDCR);
- if (chip->ecc.algo == NAND_ECC_BCH)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
writel_relaxed(0, nfc->regs + NDECCCTRL);
}
}
@@ -966,7 +966,7 @@ static int marvell_nfc_hw_ecc_check_bitflips(struct nand_chip *chip,
if (ndsr & NDSR_CORERR) {
writel_relaxed(ndsr, nfc->regs + NDSR);
- if (chip->ecc.algo == NAND_ECC_BCH)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
bf = NDSR_ERRCNT(ndsr);
else
bf = 1;
@@ -2215,7 +2215,7 @@ static int marvell_nand_hw_ecc_controller_init(struct mtd_info *mtd,
ecc->size = l->data_bytes;
if (ecc->strength == 1) {
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
ecc->read_page_raw = marvell_nfc_hw_ecc_hmg_read_page_raw;
ecc->read_page = marvell_nfc_hw_ecc_hmg_read_page;
ecc->read_oob_raw = marvell_nfc_hw_ecc_hmg_read_oob_raw;
@@ -2225,7 +2225,7 @@ static int marvell_nand_hw_ecc_controller_init(struct mtd_info *mtd,
ecc->write_oob_raw = marvell_nfc_hw_ecc_hmg_write_oob_raw;
ecc->write_oob = ecc->write_oob_raw;
} else {
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
ecc->strength = 16;
ecc->read_page_raw = marvell_nfc_hw_ecc_bch_read_page_raw;
ecc->read_page = marvell_nfc_hw_ecc_bch_read_page;
diff --git a/drivers/mtd/nand/raw/mpc5121_nfc.c b/drivers/mtd/nand/raw/mpc5121_nfc.c
index 18ecb096a32d..a67eded226db 100644
--- a/drivers/mtd/nand/raw/mpc5121_nfc.c
+++ b/drivers/mtd/nand/raw/mpc5121_nfc.c
@@ -689,7 +689,7 @@ static int mpc5121_nfc_probe(struct platform_device *op)
chip->legacy.get_features = nand_get_set_features_notsupp;
chip->bbt_options = NAND_BBT_USE_FLASH;
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Support external chip-select logic on ADS5121 board */
if (of_machine_is_compatible("fsl,mpc5121ads")) {
diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index 09dacb83cb5a..c2e9759cfba8 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -1846,7 +1846,7 @@ static int mxcnd_probe(struct platform_device *pdev)
this->ecc.mode = NAND_ECC_HW;
} else {
this->ecc.mode = NAND_ECC_SOFT;
- this->ecc.algo = NAND_ECC_HAMMING;
+ this->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
/* NAND bus width determines access functions used by upper layer */
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index bd3f5a875e39..3c11525d5054 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5043,9 +5043,9 @@ static int of_get_nand_ecc_mode(struct device_node *np)
}
static const char * const nand_ecc_algos[] = {
- [NAND_ECC_HAMMING] = "hamming",
- [NAND_ECC_BCH] = "bch",
- [NAND_ECC_RS] = "rs",
+ [NAND_ECC_ALGO_HAMMING] = "hamming",
+ [NAND_ECC_ALGO_BCH] = "bch",
+ [NAND_ECC_ALGO_RS] = "rs",
};
static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
@@ -5056,7 +5056,7 @@ static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
err = of_property_read_string(np, "nand-ecc-algo", &pm);
if (!err) {
- for (ecc_algo = NAND_ECC_HAMMING;
+ for (ecc_algo = NAND_ECC_ALGO_HAMMING;
ecc_algo < ARRAY_SIZE(nand_ecc_algos);
ecc_algo++) {
if (!strcasecmp(pm, nand_ecc_algos[ecc_algo]))
@@ -5071,12 +5071,12 @@ static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
err = of_property_read_string(np, "nand-ecc-mode", &pm);
if (!err) {
if (!strcasecmp(pm, "soft"))
- return NAND_ECC_HAMMING;
+ return NAND_ECC_ALGO_HAMMING;
else if (!strcasecmp(pm, "soft_bch"))
- return NAND_ECC_BCH;
+ return NAND_ECC_ALGO_BCH;
}
- return NAND_ECC_UNKNOWN;
+ return NAND_ECC_ALGO_UNKNOWN;
}
static int of_get_nand_ecc_step_size(struct device_node *np)
@@ -5144,7 +5144,7 @@ static int nand_dt_init(struct nand_chip *chip)
if (ecc_mode >= 0)
chip->ecc.mode = ecc_mode;
- if (ecc_algo != NAND_ECC_UNKNOWN)
+ if (ecc_algo != NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = ecc_algo;
if (ecc_strength >= 0)
@@ -5268,7 +5268,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
return -EINVAL;
switch (ecc->algo) {
- case NAND_ECC_HAMMING:
+ case NAND_ECC_ALGO_HAMMING:
ecc->calculate = nand_calculate_ecc;
ecc->correct = nand_correct_data;
ecc->read_page = nand_read_page_swecc;
@@ -5289,7 +5289,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
ecc->options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
return 0;
- case NAND_ECC_BCH:
+ case NAND_ECC_ALGO_BCH:
if (!mtd_nand_has_bch()) {
WARN(1, "CONFIG_MTD_NAND_ECC_SW_BCH not enabled\n");
return -EINVAL;
@@ -5729,7 +5729,7 @@ static int nand_scan_tail(struct nand_chip *chip)
* If no default placement scheme is given, select an appropriate one.
*/
if (!mtd->ooblayout &&
- !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_BCH)) {
+ !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_ALGO_BCH)) {
switch (mtd->oobsize) {
case 8:
case 16:
@@ -5820,7 +5820,7 @@ static int nand_scan_tail(struct nand_chip *chip)
pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
ecc->size, mtd->writesize);
ecc->mode = NAND_ECC_SOFT;
- ecc->algo = NAND_ECC_HAMMING;
+ ecc->algo = NAND_ECC_ALGO_HAMMING;
fallthrough;
case NAND_ECC_SOFT:
ret = nand_set_ecc_soft_ops(chip);
@@ -6077,7 +6077,7 @@ EXPORT_SYMBOL(nand_scan_with_ids);
void nand_cleanup(struct nand_chip *chip)
{
if (chip->ecc.mode == NAND_ECC_SOFT &&
- chip->ecc.algo == NAND_ECC_BCH)
+ chip->ecc.algo == NAND_ECC_ALGO_BCH)
nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
nanddev_cleanup(&chip->base);
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index 3589b4fce0d4..a43b4d17bc69 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -543,7 +543,7 @@ static int micron_nand_init(struct nand_chip *chip)
chip->ecc.bytes = chip->base.eccreq.strength * 2;
chip->ecc.size = 512;
chip->ecc.strength = chip->base.eccreq.strength;
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index 0a5cb77966cc..9bcf1b9d4987 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2235,7 +2235,7 @@ static int ns_attach_chip(struct nand_chip *chip)
}
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.size = 512;
chip->ecc.strength = bch;
chip->ecc.bytes = eccbytes;
@@ -2275,7 +2275,7 @@ static int __init ns_init_module(void)
nand_set_controller_data(chip, (void *)ns);
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
/* and 'badblocks' parameters to work */
chip->options |= NAND_SKIP_BBTSCAN;
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index eb7fcfd9276b..967ddbda1c48 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -2011,7 +2011,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
*/
if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
}
diff --git a/drivers/mtd/nand/raw/orion_nand.c b/drivers/mtd/nand/raw/orion_nand.c
index 880b54ca1b41..7a5cfa3d883f 100644
--- a/drivers/mtd/nand/raw/orion_nand.c
+++ b/drivers/mtd/nand/raw/orion_nand.c
@@ -140,7 +140,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
nc->legacy.cmd_ctrl = orion_nand_cmd_ctrl;
nc->legacy.read_buf = orion_nand_read_buf;
nc->ecc.mode = NAND_ECC_SOFT;
- nc->ecc.algo = NAND_ECC_HAMMING;
+ nc->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (board->chip_delay)
nc->legacy.chip_delay = board->chip_delay;
diff --git a/drivers/mtd/nand/raw/pasemi_nand.c b/drivers/mtd/nand/raw/pasemi_nand.c
index d8eca8c3fdcd..3eddc284614d 100644
--- a/drivers/mtd/nand/raw/pasemi_nand.c
+++ b/drivers/mtd/nand/raw/pasemi_nand.c
@@ -133,7 +133,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
chip->legacy.write_buf = pasemi_write_buf;
chip->legacy.chip_delay = 0;
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Enable the following for a flash based bad block table */
chip->bbt_options = NAND_BBT_USE_FLASH;
diff --git a/drivers/mtd/nand/raw/plat_nand.c b/drivers/mtd/nand/raw/plat_nand.c
index 556182f26057..dbc089c8872f 100644
--- a/drivers/mtd/nand/raw/plat_nand.c
+++ b/drivers/mtd/nand/raw/plat_nand.c
@@ -67,7 +67,7 @@ static int plat_nand_probe(struct platform_device *pdev)
data->chip.bbt_options |= pdata->chip.bbt_options;
data->chip.ecc.mode = NAND_ECC_SOFT;
- data->chip.ecc.algo = NAND_ECC_HAMMING;
+ data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
index f86dff311464..dfe5a0f07385 100644
--- a/drivers/mtd/nand/raw/s3c2410.c
+++ b/drivers/mtd/nand/raw/s3c2410.c
@@ -938,11 +938,11 @@ static int s3c2410_nand_attach_chip(struct nand_chip *chip)
case NAND_ECC_SOFT:
/*
* This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
+ * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
* avoid adding an extra ecc_algo field to
* s3c2410_platform_nand.
*/
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
dev_info(info->device, "soft ECC\n");
break;
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index a661b8bb2dd5..9dbd6fdbe264 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -1045,7 +1045,7 @@ static int flctl_chip_attach_chip(struct nand_chip *chip)
flctl->flcmncr_base |= _4ECCEN;
} else {
chip->ecc.mode = NAND_ECC_SOFT;
- chip->ecc.algo = NAND_ECC_HAMMING;
+ chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
return 0;
diff --git a/drivers/mtd/nand/raw/socrates_nand.c b/drivers/mtd/nand/raw/socrates_nand.c
index 243b34cfbc1b..72a3a7f98282 100644
--- a/drivers/mtd/nand/raw/socrates_nand.c
+++ b/drivers/mtd/nand/raw/socrates_nand.c
@@ -154,7 +154,7 @@ static int socrates_nand_probe(struct platform_device *ofdev)
nand_chip->legacy.dev_ready = socrates_nand_device_ready;
nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
- nand_chip->ecc.algo = NAND_ECC_HAMMING;
+ nand_chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* TODO: I have no idea what real delay is. */
nand_chip->legacy.chip_delay = 20; /* 20us command delay time */
diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c
index 246871e01027..2154b6f860dd 100644
--- a/drivers/mtd/nand/raw/tango_nand.c
+++ b/drivers/mtd/nand/raw/tango_nand.c
@@ -512,7 +512,7 @@ static int tango_attach_chip(struct nand_chip *chip)
struct nand_ecc_ctrl *ecc = &chip->ecc;
ecc->mode = NAND_ECC_HW;
- ecc->algo = NAND_ECC_BCH;
+ ecc->algo = NAND_ECC_ALGO_BCH;
ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
ecc->read_page_raw = tango_read_page_raw;
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index f9d046b2cd3b..e2e13effc8a6 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -479,7 +479,7 @@ static void tegra_nand_hw_ecc(struct tegra_nand_controller *ctrl,
{
struct tegra_nand_chip *nand = to_tegra_chip(chip);
- if (chip->ecc.algo == NAND_ECC_BCH && enable)
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH && enable)
writel_relaxed(nand->bch_config, ctrl->regs + BCH_CONFIG);
else
writel_relaxed(0, ctrl->regs + BCH_CONFIG);
@@ -877,7 +877,7 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
int strength_len, bits_per_step;
switch (chip->ecc.algo) {
- case NAND_ECC_RS:
+ case NAND_ECC_ALGO_RS:
bits_per_step = BITS_PER_STEP_RS;
if (chip->options & NAND_IS_BOOT_MEDIUM) {
strength = rs_strength_bootable;
@@ -887,7 +887,7 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
strength_len = ARRAY_SIZE(rs_strength);
}
break;
- case NAND_ECC_BCH:
+ case NAND_ECC_ALGO_BCH:
bits_per_step = BITS_PER_STEP_BCH;
if (chip->options & NAND_IS_BOOT_MEDIUM) {
strength = bch_strength_bootable;
@@ -935,14 +935,14 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (chip->options & NAND_BUSWIDTH_16)
nand->config |= CONFIG_BUS_WIDTH_16;
- if (chip->ecc.algo == NAND_ECC_UNKNOWN) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN) {
if (mtd->writesize < 2048)
- chip->ecc.algo = NAND_ECC_RS;
+ chip->ecc.algo = NAND_ECC_ALGO_RS;
else
- chip->ecc.algo = NAND_ECC_BCH;
+ chip->ecc.algo = NAND_ECC_ALGO_BCH;
}
- if (chip->ecc.algo == NAND_ECC_BCH && mtd->writesize < 2048) {
+ if (chip->ecc.algo == NAND_ECC_ALGO_BCH && mtd->writesize < 2048) {
dev_err(ctrl->dev, "BCH supports 2K or 4K page size only\n");
return -EINVAL;
}
@@ -963,7 +963,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
CONFIG_SKIP_SPARE_SIZE_4;
switch (chip->ecc.algo) {
- case NAND_ECC_RS:
+ case NAND_ECC_ALGO_RS:
bits_per_step = BITS_PER_STEP_RS * chip->ecc.strength;
mtd_set_ooblayout(mtd, &tegra_nand_oob_rs_ops);
nand->config_ecc |= CONFIG_HW_ECC | CONFIG_ECC_SEL |
@@ -984,7 +984,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
return -EINVAL;
}
break;
- case NAND_ECC_BCH:
+ case NAND_ECC_ALGO_BCH:
bits_per_step = BITS_PER_STEP_BCH * chip->ecc.strength;
mtd_set_ooblayout(mtd, &tegra_nand_oob_bch_ops);
nand->bch_config = BCH_ENABLE;
@@ -1013,7 +1013,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
}
dev_info(ctrl->dev, "Using %s with strength %d per 512 byte step\n",
- chip->ecc.algo == NAND_ECC_BCH ? "BCH" : "RS",
+ chip->ecc.algo == NAND_ECC_ALGO_BCH ? "BCH" : "RS",
chip->ecc.strength);
chip->ecc.bytes = DIV_ROUND_UP(bits_per_step, BITS_PER_BYTE);
diff --git a/drivers/mtd/nand/raw/xway_nand.c b/drivers/mtd/nand/raw/xway_nand.c
index 94bfba994326..909072e82a68 100644
--- a/drivers/mtd/nand/raw/xway_nand.c
+++ b/drivers/mtd/nand/raw/xway_nand.c
@@ -181,7 +181,7 @@ static int xway_nand_probe(struct platform_device *pdev)
data->chip.legacy.chip_delay = 30;
data->chip.ecc.mode = NAND_ECC_SOFT;
- data->chip.ecc.algo = NAND_ECC_HAMMING;
+ data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
nand_set_controller_data(&data->chip, data);
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 70b2ddd0aedc..cf49aa678920 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -94,16 +94,16 @@ enum nand_ecc_mode {
/**
* enum nand_ecc_algo - NAND ECC algorithm
- * @NAND_ECC_UNKNOWN: Unknown algorithm
- * @NAND_ECC_HAMMING: Hamming algorithm
- * @NAND_ECC_BCH: Bose-Chaudhuri-Hocquenghem algorithm
- * @NAND_ECC_RS: Reed-Solomon algorithm
+ * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
+ * @NAND_ECC_ALGO_HAMMING: Hamming algorithm
+ * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm
+ * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm
*/
enum nand_ecc_algo {
- NAND_ECC_UNKNOWN,
- NAND_ECC_HAMMING,
- NAND_ECC_BCH,
- NAND_ECC_RS,
+ NAND_ECC_ALGO_UNKNOWN,
+ NAND_ECC_ALGO_HAMMING,
+ NAND_ECC_ALGO_BCH,
+ NAND_ECC_ALGO_RS,
};
/*
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 03/20] mtd: rawnand: Move the nand_ecc_algo enum to the generic NAND layer
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
This enumeration is generic and will be reused NAND-wide.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 14 ++++++++++++++
include/linux/mtd/rawnand.h | 14 --------------
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index af99041ceaa9..986c7de83326 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -115,6 +115,20 @@ struct nand_page_io_req {
int mode;
};
+/**
+ * enum nand_ecc_algo - NAND ECC algorithm
+ * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
+ * @NAND_ECC_ALGO_HAMMING: Hamming algorithm
+ * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm
+ * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm
+ */
+enum nand_ecc_algo {
+ NAND_ECC_ALGO_UNKNOWN,
+ NAND_ECC_ALGO_HAMMING,
+ NAND_ECC_ALGO_BCH,
+ NAND_ECC_ALGO_RS,
+};
+
/**
* struct nand_ecc_props - NAND ECC properties
* @strength: ECC strength
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index cf49aa678920..ce37569c3f57 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -92,20 +92,6 @@ enum nand_ecc_mode {
NAND_ECC_ON_DIE,
};
-/**
- * enum nand_ecc_algo - NAND ECC algorithm
- * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
- * @NAND_ECC_ALGO_HAMMING: Hamming algorithm
- * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm
- * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm
- */
-enum nand_ecc_algo {
- NAND_ECC_ALGO_UNKNOWN,
- NAND_ECC_ALGO_HAMMING,
- NAND_ECC_ALGO_BCH,
- NAND_ECC_ALGO_RS,
-};
-
/*
* Constants for Hardware ECC
*/
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 03/20] mtd: rawnand: Move the nand_ecc_algo enum to the generic NAND layer
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
This enumeration is generic and will be reused NAND-wide.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 14 ++++++++++++++
include/linux/mtd/rawnand.h | 14 --------------
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index af99041ceaa9..986c7de83326 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -115,6 +115,20 @@ struct nand_page_io_req {
int mode;
};
+/**
+ * enum nand_ecc_algo - NAND ECC algorithm
+ * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
+ * @NAND_ECC_ALGO_HAMMING: Hamming algorithm
+ * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm
+ * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm
+ */
+enum nand_ecc_algo {
+ NAND_ECC_ALGO_UNKNOWN,
+ NAND_ECC_ALGO_HAMMING,
+ NAND_ECC_ALGO_BCH,
+ NAND_ECC_ALGO_RS,
+};
+
/**
* struct nand_ecc_props - NAND ECC properties
* @strength: ECC strength
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index cf49aa678920..ce37569c3f57 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -92,20 +92,6 @@ enum nand_ecc_mode {
NAND_ECC_ON_DIE,
};
-/**
- * enum nand_ecc_algo - NAND ECC algorithm
- * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
- * @NAND_ECC_ALGO_HAMMING: Hamming algorithm
- * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm
- * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm
- */
-enum nand_ecc_algo {
- NAND_ECC_ALGO_UNKNOWN,
- NAND_ECC_ALGO_HAMMING,
- NAND_ECC_ALGO_BCH,
- NAND_ECC_ALGO_RS,
-};
-
/*
* Constants for Hardware ECC
*/
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 03/20] mtd: rawnand: Move the nand_ecc_algo enum to the generic NAND layer
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
This enumeration is generic and will be reused NAND-wide.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 14 ++++++++++++++
include/linux/mtd/rawnand.h | 14 --------------
2 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index af99041ceaa9..986c7de83326 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -115,6 +115,20 @@ struct nand_page_io_req {
int mode;
};
+/**
+ * enum nand_ecc_algo - NAND ECC algorithm
+ * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
+ * @NAND_ECC_ALGO_HAMMING: Hamming algorithm
+ * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm
+ * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm
+ */
+enum nand_ecc_algo {
+ NAND_ECC_ALGO_UNKNOWN,
+ NAND_ECC_ALGO_HAMMING,
+ NAND_ECC_ALGO_BCH,
+ NAND_ECC_ALGO_RS,
+};
+
/**
* struct nand_ecc_props - NAND ECC properties
* @strength: ECC strength
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index cf49aa678920..ce37569c3f57 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -92,20 +92,6 @@ enum nand_ecc_mode {
NAND_ECC_ON_DIE,
};
-/**
- * enum nand_ecc_algo - NAND ECC algorithm
- * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
- * @NAND_ECC_ALGO_HAMMING: Hamming algorithm
- * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm
- * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm
- */
-enum nand_ecc_algo {
- NAND_ECC_ALGO_UNKNOWN,
- NAND_ECC_ALGO_HAMMING,
- NAND_ECC_ALGO_BCH,
- NAND_ECC_ALGO_RS,
-};
-
/*
* Constants for Hardware ECC
*/
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 04/20] mtd: nand: Add a NAND page I/O request type
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Use an enum to differentiate the type of I/O (reading or writing a
page). Also update the request iterator.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
drivers/mtd/nand/spi/core.c | 4 ++--
include/linux/mtd/nand.h | 18 ++++++++++++++++--
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 4b2619d853e2..6f6ec8aa143d 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -497,7 +497,7 @@ static int spinand_mtd_read(struct mtd_info *mtd, loff_t from,
mutex_lock(&spinand->lock);
- nanddev_io_for_each_page(nand, from, ops, &iter) {
+ nanddev_io_for_each_page(nand, NAND_PAGE_READ, from, ops, &iter) {
ret = spinand_select_target(spinand, iter.req.pos.target);
if (ret)
break;
@@ -545,7 +545,7 @@ static int spinand_mtd_write(struct mtd_info *mtd, loff_t to,
mutex_lock(&spinand->lock);
- nanddev_io_for_each_page(nand, to, ops, &iter) {
+ nanddev_io_for_each_page(nand, NAND_PAGE_WRITE, to, ops, &iter) {
ret = spinand_select_target(spinand, iter.req.pos.target);
if (ret)
break;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 986c7de83326..e754a6fc8a4b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -82,8 +82,19 @@ struct nand_pos {
unsigned int page;
};
+/**
+ * enum nand_page_io_req_type - Direction of an I/O request
+ * @NAND_PAGE_READ: from the chip, to the controller
+ * @NAND_PAGE_WRITE: from the controller, to the chip
+ */
+enum nand_page_io_req_type {
+ NAND_PAGE_READ = 0,
+ NAND_PAGE_WRITE,
+};
+
/**
* struct nand_page_io_req - NAND I/O request object
+ * @type: the type of page I/O: read or write
* @pos: the position this I/O request is targeting
* @dataoffs: the offset within the page
* @datalen: number of data bytes to read from/write to this page
@@ -99,6 +110,7 @@ struct nand_pos {
* specific commands/operations.
*/
struct nand_page_io_req {
+ enum nand_page_io_req_type type;
struct nand_pos pos;
unsigned int dataoffs;
unsigned int datalen;
@@ -638,11 +650,13 @@ static inline void nanddev_pos_next_page(struct nand_device *nand,
* layer.
*/
static inline void nanddev_io_iter_init(struct nand_device *nand,
+ enum nand_page_io_req_type reqtype,
loff_t offs, struct mtd_oob_ops *req,
struct nand_io_iter *iter)
{
struct mtd_info *mtd = nanddev_to_mtd(nand);
+ iter->req.type = reqtype;
iter->req.mode = req->mode;
iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos);
iter->req.ooboffs = req->ooboffs;
@@ -712,8 +726,8 @@ static inline bool nanddev_io_iter_end(struct nand_device *nand,
*
* Should be used for iterate over pages that are contained in an MTD request.
*/
-#define nanddev_io_for_each_page(nand, start, req, iter) \
- for (nanddev_io_iter_init(nand, start, req, iter); \
+#define nanddev_io_for_each_page(nand, type, start, req, iter) \
+ for (nanddev_io_iter_init(nand, type, start, req, iter); \
!nanddev_io_iter_end(nand, iter); \
nanddev_io_iter_next_page(nand, iter))
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 04/20] mtd: nand: Add a NAND page I/O request type
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Use an enum to differentiate the type of I/O (reading or writing a
page). Also update the request iterator.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
drivers/mtd/nand/spi/core.c | 4 ++--
include/linux/mtd/nand.h | 18 ++++++++++++++++--
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 4b2619d853e2..6f6ec8aa143d 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -497,7 +497,7 @@ static int spinand_mtd_read(struct mtd_info *mtd, loff_t from,
mutex_lock(&spinand->lock);
- nanddev_io_for_each_page(nand, from, ops, &iter) {
+ nanddev_io_for_each_page(nand, NAND_PAGE_READ, from, ops, &iter) {
ret = spinand_select_target(spinand, iter.req.pos.target);
if (ret)
break;
@@ -545,7 +545,7 @@ static int spinand_mtd_write(struct mtd_info *mtd, loff_t to,
mutex_lock(&spinand->lock);
- nanddev_io_for_each_page(nand, to, ops, &iter) {
+ nanddev_io_for_each_page(nand, NAND_PAGE_WRITE, to, ops, &iter) {
ret = spinand_select_target(spinand, iter.req.pos.target);
if (ret)
break;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 986c7de83326..e754a6fc8a4b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -82,8 +82,19 @@ struct nand_pos {
unsigned int page;
};
+/**
+ * enum nand_page_io_req_type - Direction of an I/O request
+ * @NAND_PAGE_READ: from the chip, to the controller
+ * @NAND_PAGE_WRITE: from the controller, to the chip
+ */
+enum nand_page_io_req_type {
+ NAND_PAGE_READ = 0,
+ NAND_PAGE_WRITE,
+};
+
/**
* struct nand_page_io_req - NAND I/O request object
+ * @type: the type of page I/O: read or write
* @pos: the position this I/O request is targeting
* @dataoffs: the offset within the page
* @datalen: number of data bytes to read from/write to this page
@@ -99,6 +110,7 @@ struct nand_pos {
* specific commands/operations.
*/
struct nand_page_io_req {
+ enum nand_page_io_req_type type;
struct nand_pos pos;
unsigned int dataoffs;
unsigned int datalen;
@@ -638,11 +650,13 @@ static inline void nanddev_pos_next_page(struct nand_device *nand,
* layer.
*/
static inline void nanddev_io_iter_init(struct nand_device *nand,
+ enum nand_page_io_req_type reqtype,
loff_t offs, struct mtd_oob_ops *req,
struct nand_io_iter *iter)
{
struct mtd_info *mtd = nanddev_to_mtd(nand);
+ iter->req.type = reqtype;
iter->req.mode = req->mode;
iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos);
iter->req.ooboffs = req->ooboffs;
@@ -712,8 +726,8 @@ static inline bool nanddev_io_iter_end(struct nand_device *nand,
*
* Should be used for iterate over pages that are contained in an MTD request.
*/
-#define nanddev_io_for_each_page(nand, start, req, iter) \
- for (nanddev_io_iter_init(nand, start, req, iter); \
+#define nanddev_io_for_each_page(nand, type, start, req, iter) \
+ for (nanddev_io_iter_init(nand, type, start, req, iter); \
!nanddev_io_iter_end(nand, iter); \
nanddev_io_iter_next_page(nand, iter))
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 04/20] mtd: nand: Add a NAND page I/O request type
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Use an enum to differentiate the type of I/O (reading or writing a
page). Also update the request iterator.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
drivers/mtd/nand/spi/core.c | 4 ++--
include/linux/mtd/nand.h | 18 ++++++++++++++++--
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 4b2619d853e2..6f6ec8aa143d 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -497,7 +497,7 @@ static int spinand_mtd_read(struct mtd_info *mtd, loff_t from,
mutex_lock(&spinand->lock);
- nanddev_io_for_each_page(nand, from, ops, &iter) {
+ nanddev_io_for_each_page(nand, NAND_PAGE_READ, from, ops, &iter) {
ret = spinand_select_target(spinand, iter.req.pos.target);
if (ret)
break;
@@ -545,7 +545,7 @@ static int spinand_mtd_write(struct mtd_info *mtd, loff_t to,
mutex_lock(&spinand->lock);
- nanddev_io_for_each_page(nand, to, ops, &iter) {
+ nanddev_io_for_each_page(nand, NAND_PAGE_WRITE, to, ops, &iter) {
ret = spinand_select_target(spinand, iter.req.pos.target);
if (ret)
break;
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 986c7de83326..e754a6fc8a4b 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -82,8 +82,19 @@ struct nand_pos {
unsigned int page;
};
+/**
+ * enum nand_page_io_req_type - Direction of an I/O request
+ * @NAND_PAGE_READ: from the chip, to the controller
+ * @NAND_PAGE_WRITE: from the controller, to the chip
+ */
+enum nand_page_io_req_type {
+ NAND_PAGE_READ = 0,
+ NAND_PAGE_WRITE,
+};
+
/**
* struct nand_page_io_req - NAND I/O request object
+ * @type: the type of page I/O: read or write
* @pos: the position this I/O request is targeting
* @dataoffs: the offset within the page
* @datalen: number of data bytes to read from/write to this page
@@ -99,6 +110,7 @@ struct nand_pos {
* specific commands/operations.
*/
struct nand_page_io_req {
+ enum nand_page_io_req_type type;
struct nand_pos pos;
unsigned int dataoffs;
unsigned int datalen;
@@ -638,11 +650,13 @@ static inline void nanddev_pos_next_page(struct nand_device *nand,
* layer.
*/
static inline void nanddev_io_iter_init(struct nand_device *nand,
+ enum nand_page_io_req_type reqtype,
loff_t offs, struct mtd_oob_ops *req,
struct nand_io_iter *iter)
{
struct mtd_info *mtd = nanddev_to_mtd(nand);
+ iter->req.type = reqtype;
iter->req.mode = req->mode;
iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos);
iter->req.ooboffs = req->ooboffs;
@@ -712,8 +726,8 @@ static inline bool nanddev_io_iter_end(struct nand_device *nand,
*
* Should be used for iterate over pages that are contained in an MTD request.
*/
-#define nanddev_io_for_each_page(nand, start, req, iter) \
- for (nanddev_io_iter_init(nand, start, req, iter); \
+#define nanddev_io_for_each_page(nand, type, start, req, iter) \
+ for (nanddev_io_iter_init(nand, type, start, req, iter); \
!nanddev_io_iter_end(nand, iter); \
nanddev_io_iter_next_page(nand, iter))
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 05/20] dt-bindings: mtd: Document nand-ecc-placement
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal,
Rob Herring
This optional property defines where the ECC bytes are expected to be
stored. No value defaults to an unknown location, while these
locations can be explicitly set to OOB or interleaved depending if
the ECC bytes are entirely stored in the OOB area or mixed with
regular data in the main area (also sometimes referred as
"syndrome").
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/mtd/nand-controller.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index d261b7096c69..4a0798247d2d 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -56,6 +56,16 @@ patternProperties:
(Linux will handle the calculations). soft_bch is deprecated
and should be replaced by soft and nand-ecc-algo.
+ nand-ecc-placement:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/string
+ - enum: [ oob, interleaved ]
+ description:
+ Location of the ECC bytes. This location is unknown by default
+ but can be explicitly set to "oob", if all ECC bytes are
+ known to be stored in the OOB area, or "interleaved" if ECC
+ bytes will be interleaved with regular data in the main area.
+
nand-ecc-algo:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 05/20] dt-bindings: mtd: Document nand-ecc-placement
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Rob Herring, Julien Su, Miquel Raynal,
Rob Herring, Thomas Petazzoni, Boris Brezillon, Mason Yang,
linux-arm-kernel
This optional property defines where the ECC bytes are expected to be
stored. No value defaults to an unknown location, while these
locations can be explicitly set to OOB or interleaved depending if
the ECC bytes are entirely stored in the OOB area or mixed with
regular data in the main area (also sometimes referred as
"syndrome").
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/mtd/nand-controller.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index d261b7096c69..4a0798247d2d 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -56,6 +56,16 @@ patternProperties:
(Linux will handle the calculations). soft_bch is deprecated
and should be replaced by soft and nand-ecc-algo.
+ nand-ecc-placement:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/string
+ - enum: [ oob, interleaved ]
+ description:
+ Location of the ECC bytes. This location is unknown by default
+ but can be explicitly set to "oob", if all ECC bytes are
+ known to be stored in the OOB area, or "interleaved" if ECC
+ bytes will be interleaved with regular data in the main area.
+
nand-ecc-algo:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 05/20] dt-bindings: mtd: Document nand-ecc-placement
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Rob Herring, Julien Su, Miquel Raynal,
Rob Herring, Thomas Petazzoni, Boris Brezillon, Mason Yang,
linux-arm-kernel
This optional property defines where the ECC bytes are expected to be
stored. No value defaults to an unknown location, while these
locations can be explicitly set to OOB or interleaved depending if
the ECC bytes are entirely stored in the OOB area or mixed with
regular data in the main area (also sometimes referred as
"syndrome").
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../devicetree/bindings/mtd/nand-controller.yaml | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index d261b7096c69..4a0798247d2d 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -56,6 +56,16 @@ patternProperties:
(Linux will handle the calculations). soft_bch is deprecated
and should be replaced by soft and nand-ecc-algo.
+ nand-ecc-placement:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/string
+ - enum: [ oob, interleaved ]
+ description:
+ Location of the ECC bytes. This location is unknown by default
+ but can be explicitly set to "oob", if all ECC bytes are
+ known to be stored in the OOB area, or "interleaved" if ECC
+ bytes will be interleaved with regular data in the main area.
+
nand-ecc-algo:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 06/20] dt-bindings: mtd: Document nand-ecc-engine
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
This property is needed to precisely point to the hardware ECC engine
to use when there are several of them available. Here, hardware also
refers to the on-die possibility.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
.../devicetree/bindings/mtd/nand-controller.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index 4a0798247d2d..0969d2e6720b 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -56,6 +56,18 @@ patternProperties:
(Linux will handle the calculations). soft_bch is deprecated
and should be replaced by soft and nand-ecc-algo.
+ nand-ecc-engine:
+ maxItems: 1
+ description:
+ A phandle on the hardware ECC engine if any. There are
+ basically three possibilities:
+ 1/ The ECC engine is part of the NAND controller, in this
+ case the phandle should reference the parent node.
+ 2/ The ECC engine is part of the NAND part (on-die), in this
+ case the phandle should reference the node itself.
+ 3/ The ECC engine is external, in this case the phandle should
+ reference the specific ECC engine node.
+
nand-ecc-placement:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 06/20] dt-bindings: mtd: Document nand-ecc-engine
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
This property is needed to precisely point to the hardware ECC engine
to use when there are several of them available. Here, hardware also
refers to the on-die possibility.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
.../devicetree/bindings/mtd/nand-controller.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index 4a0798247d2d..0969d2e6720b 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -56,6 +56,18 @@ patternProperties:
(Linux will handle the calculations). soft_bch is deprecated
and should be replaced by soft and nand-ecc-algo.
+ nand-ecc-engine:
+ maxItems: 1
+ description:
+ A phandle on the hardware ECC engine if any. There are
+ basically three possibilities:
+ 1/ The ECC engine is part of the NAND controller, in this
+ case the phandle should reference the parent node.
+ 2/ The ECC engine is part of the NAND part (on-die), in this
+ case the phandle should reference the node itself.
+ 3/ The ECC engine is external, in this case the phandle should
+ reference the specific ECC engine node.
+
nand-ecc-placement:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 06/20] dt-bindings: mtd: Document nand-ecc-engine
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
This property is needed to precisely point to the hardware ECC engine
to use when there are several of them available. Here, hardware also
refers to the on-die possibility.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
.../devicetree/bindings/mtd/nand-controller.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index 4a0798247d2d..0969d2e6720b 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -56,6 +56,18 @@ patternProperties:
(Linux will handle the calculations). soft_bch is deprecated
and should be replaced by soft and nand-ecc-algo.
+ nand-ecc-engine:
+ maxItems: 1
+ description:
+ A phandle on the hardware ECC engine if any. There are
+ basically three possibilities:
+ 1/ The ECC engine is part of the NAND controller, in this
+ case the phandle should reference the parent node.
+ 2/ The ECC engine is part of the NAND part (on-die), in this
+ case the phandle should reference the node itself.
+ 3/ The ECC engine is external, in this case the phandle should
+ reference the specific ECC engine node.
+
nand-ecc-placement:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread* Re: [PATCH v10 06/20] dt-bindings: mtd: Document nand-ecc-engine
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 22:16 ` Rob Herring
-1 siblings, 0 replies; 72+ messages in thread
From: Rob Herring @ 2020-06-03 22:16 UTC (permalink / raw)
To: Miquel Raynal
Cc: Boris Brezillon, Tudor Ambarus, Thomas Petazzoni, linux-mtd,
Vignesh Raghavendra, Mason Yang, linux-arm-kernel,
Richard Weinberger, Julien Su, Mark Rutland, devicetree,
Rob Herring
On Wed, 03 Jun 2020 19:57:45 +0200, Miquel Raynal wrote:
> This property is needed to precisely point to the hardware ECC engine
> to use when there are several of them available. Here, hardware also
> refers to the on-die possibility.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> .../devicetree/bindings/mtd/nand-controller.yaml | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
Documentation/devicetree/bindings/mtd/nand-controller.yaml: while scanning for the next token
found character that cannot start any token
in "<unicode string>", line 62, column 1
Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/mtd/nand-controller.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/mtd/nand-controller.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/mtd/nand-controller.yaml
Makefile:1300: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
See https://patchwork.ozlabs.org/patch/1303116
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCH v10 06/20] dt-bindings: mtd: Document nand-ecc-engine
@ 2020-06-03 22:16 ` Rob Herring
0 siblings, 0 replies; 72+ messages in thread
From: Rob Herring @ 2020-06-03 22:16 UTC (permalink / raw)
To: Miquel Raynal
Cc: Mark Rutland, devicetree, Vignesh Raghavendra, Tudor Ambarus,
Julien Su, Richard Weinberger, Rob Herring, Boris Brezillon,
linux-mtd, Thomas Petazzoni, Mason Yang, linux-arm-kernel
On Wed, 03 Jun 2020 19:57:45 +0200, Miquel Raynal wrote:
> This property is needed to precisely point to the hardware ECC engine
> to use when there are several of them available. Here, hardware also
> refers to the on-die possibility.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> .../devicetree/bindings/mtd/nand-controller.yaml | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
Documentation/devicetree/bindings/mtd/nand-controller.yaml: while scanning for the next token
found character that cannot start any token
in "<unicode string>", line 62, column 1
Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/mtd/nand-controller.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/mtd/nand-controller.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/mtd/nand-controller.yaml
Makefile:1300: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
See https://patchwork.ozlabs.org/patch/1303116
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCH v10 06/20] dt-bindings: mtd: Document nand-ecc-engine
@ 2020-06-03 22:16 ` Rob Herring
0 siblings, 0 replies; 72+ messages in thread
From: Rob Herring @ 2020-06-03 22:16 UTC (permalink / raw)
To: Miquel Raynal
Cc: Mark Rutland, devicetree, Vignesh Raghavendra, Tudor Ambarus,
Julien Su, Richard Weinberger, Rob Herring, Boris Brezillon,
linux-mtd, Thomas Petazzoni, Mason Yang, linux-arm-kernel
On Wed, 03 Jun 2020 19:57:45 +0200, Miquel Raynal wrote:
> This property is needed to precisely point to the hardware ECC engine
> to use when there are several of them available. Here, hardware also
> refers to the on-die possibility.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> .../devicetree/bindings/mtd/nand-controller.yaml | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
My bot found errors running 'make dt_binding_check' on your patch:
Documentation/devicetree/bindings/mtd/nand-controller.yaml: while scanning for the next token
found character that cannot start any token
in "<unicode string>", line 62, column 1
Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/mtd/nand-controller.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/mtd/nand-controller.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/mtd/nand-controller.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/nand-controller.yaml: ignoring, error parsing file
warning: no schema found in file: ./Documentation/devicetree/bindings/mtd/nand-controller.yaml
Makefile:1300: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2
See https://patchwork.ozlabs.org/patch/1303116
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:
pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
Please check and re-submit.
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 72+ messages in thread
* [PATCH v10 07/20] dt-bindings: mtd: Document boolean NAND ECC properties
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties.
The former is here to force software correction, the latter prevents
any correction to happen.
These properties (along with nand-ecc-engine) are supposed to be more
accurate than the current nand-ecc-modes wich is very misleading and
very often people think it is mandatory while the core should be
relied upon to decide which correction to handle.
nand-ecc-mode was already inacurate, but it becomes totally
problematic with setups where there are several hardware engines.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
Documentation/devicetree/bindings/mtd/nand-controller.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index 0969d2e6720b..a3750978ebb8 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -68,6 +68,12 @@ patternProperties:
3/ The ECC engine is external, in this case the phandle should
reference the specific ECC engine node.
+ nand-use-soft-ecc-engine: true
+ description: Use a software ECC engine.
+
+ nand-no-ecc-engine: true
+ description: Do not use any ECC correction.
+
nand-ecc-placement:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 07/20] dt-bindings: mtd: Document boolean NAND ECC properties
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties.
The former is here to force software correction, the latter prevents
any correction to happen.
These properties (along with nand-ecc-engine) are supposed to be more
accurate than the current nand-ecc-modes wich is very misleading and
very often people think it is mandatory while the core should be
relied upon to decide which correction to handle.
nand-ecc-mode was already inacurate, but it becomes totally
problematic with setups where there are several hardware engines.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
Documentation/devicetree/bindings/mtd/nand-controller.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index 0969d2e6720b..a3750978ebb8 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -68,6 +68,12 @@ patternProperties:
3/ The ECC engine is external, in this case the phandle should
reference the specific ECC engine node.
+ nand-use-soft-ecc-engine: true
+ description: Use a software ECC engine.
+
+ nand-no-ecc-engine: true
+ description: Do not use any ECC correction.
+
nand-ecc-placement:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 07/20] dt-bindings: mtd: Document boolean NAND ECC properties
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties.
The former is here to force software correction, the latter prevents
any correction to happen.
These properties (along with nand-ecc-engine) are supposed to be more
accurate than the current nand-ecc-modes wich is very misleading and
very often people think it is mandatory while the core should be
relied upon to decide which correction to handle.
nand-ecc-mode was already inacurate, but it becomes totally
problematic with setups where there are several hardware engines.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
Documentation/devicetree/bindings/mtd/nand-controller.yaml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index 0969d2e6720b..a3750978ebb8 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -68,6 +68,12 @@ patternProperties:
3/ The ECC engine is external, in this case the phandle should
reference the specific ECC engine node.
+ nand-use-soft-ecc-engine: true
+ description: Use a software ECC engine.
+
+ nand-no-ecc-engine: true
+ description: Do not use any ECC correction.
+
nand-ecc-placement:
allOf:
- $ref: /schemas/types.yaml#/definitions/string
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread* Re: [PATCH v10 07/20] dt-bindings: mtd: Document boolean NAND ECC properties
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-04 23:08 ` Rob Herring
-1 siblings, 0 replies; 72+ messages in thread
From: Rob Herring @ 2020-06-04 23:08 UTC (permalink / raw)
To: Miquel Raynal
Cc: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
linux-mtd, Boris Brezillon, Thomas Petazzoni, linux-arm-kernel,
Mason Yang, Julien Su, Mark Rutland, devicetree
On Wed, Jun 03, 2020 at 07:57:46PM +0200, Miquel Raynal wrote:
> Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties.
> The former is here to force software correction, the latter prevents
> any correction to happen.
>
> These properties (along with nand-ecc-engine) are supposed to be more
> accurate than the current nand-ecc-modes wich is very misleading and
> very often people think it is mandatory while the core should be
> relied upon to decide which correction to handle.
>
> nand-ecc-mode was already inacurate, but it becomes totally
> problematic with setups where there are several hardware engines.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> Documentation/devicetree/bindings/mtd/nand-controller.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> index 0969d2e6720b..a3750978ebb8 100644
> --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> @@ -68,6 +68,12 @@ patternProperties:
> 3/ The ECC engine is external, in this case the phandle should
> reference the specific ECC engine node.
>
> + nand-use-soft-ecc-engine: true
> + description: Use a software ECC engine.
Humm, I'm surprised this is valid YAML. nand-use-soft-ecc-engine can't
be both a boolean and a map (aka schema, aka dict).
nand-use-soft-ecc-engine:
type: boolean
description: ...
> +
> + nand-no-ecc-engine: true
> + description: Do not use any ECC correction.
> +
> nand-ecc-placement:
> allOf:
> - $ref: /schemas/types.yaml#/definitions/string
> --
> 2.20.1
>
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCH v10 07/20] dt-bindings: mtd: Document boolean NAND ECC properties
@ 2020-06-04 23:08 ` Rob Herring
0 siblings, 0 replies; 72+ messages in thread
From: Rob Herring @ 2020-06-04 23:08 UTC (permalink / raw)
To: Miquel Raynal
Cc: Mark Rutland, devicetree, Vignesh Raghavendra, Tudor Ambarus,
Julien Su, Richard Weinberger, Boris Brezillon, linux-mtd,
Thomas Petazzoni, Mason Yang, linux-arm-kernel
On Wed, Jun 03, 2020 at 07:57:46PM +0200, Miquel Raynal wrote:
> Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties.
> The former is here to force software correction, the latter prevents
> any correction to happen.
>
> These properties (along with nand-ecc-engine) are supposed to be more
> accurate than the current nand-ecc-modes wich is very misleading and
> very often people think it is mandatory while the core should be
> relied upon to decide which correction to handle.
>
> nand-ecc-mode was already inacurate, but it becomes totally
> problematic with setups where there are several hardware engines.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> Documentation/devicetree/bindings/mtd/nand-controller.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> index 0969d2e6720b..a3750978ebb8 100644
> --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> @@ -68,6 +68,12 @@ patternProperties:
> 3/ The ECC engine is external, in this case the phandle should
> reference the specific ECC engine node.
>
> + nand-use-soft-ecc-engine: true
> + description: Use a software ECC engine.
Humm, I'm surprised this is valid YAML. nand-use-soft-ecc-engine can't
be both a boolean and a map (aka schema, aka dict).
nand-use-soft-ecc-engine:
type: boolean
description: ...
> +
> + nand-no-ecc-engine: true
> + description: Do not use any ECC correction.
> +
> nand-ecc-placement:
> allOf:
> - $ref: /schemas/types.yaml#/definitions/string
> --
> 2.20.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCH v10 07/20] dt-bindings: mtd: Document boolean NAND ECC properties
@ 2020-06-04 23:08 ` Rob Herring
0 siblings, 0 replies; 72+ messages in thread
From: Rob Herring @ 2020-06-04 23:08 UTC (permalink / raw)
To: Miquel Raynal
Cc: Mark Rutland, devicetree, Vignesh Raghavendra, Tudor Ambarus,
Julien Su, Richard Weinberger, Boris Brezillon, linux-mtd,
Thomas Petazzoni, Mason Yang, linux-arm-kernel
On Wed, Jun 03, 2020 at 07:57:46PM +0200, Miquel Raynal wrote:
> Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties.
> The former is here to force software correction, the latter prevents
> any correction to happen.
>
> These properties (along with nand-ecc-engine) are supposed to be more
> accurate than the current nand-ecc-modes wich is very misleading and
> very often people think it is mandatory while the core should be
> relied upon to decide which correction to handle.
>
> nand-ecc-mode was already inacurate, but it becomes totally
> problematic with setups where there are several hardware engines.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> Documentation/devicetree/bindings/mtd/nand-controller.yaml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> index 0969d2e6720b..a3750978ebb8 100644
> --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> @@ -68,6 +68,12 @@ patternProperties:
> 3/ The ECC engine is external, in this case the phandle should
> reference the specific ECC engine node.
>
> + nand-use-soft-ecc-engine: true
> + description: Use a software ECC engine.
Humm, I'm surprised this is valid YAML. nand-use-soft-ecc-engine can't
be both a boolean and a map (aka schema, aka dict).
nand-use-soft-ecc-engine:
type: boolean
description: ...
> +
> + nand-no-ecc-engine: true
> + description: Do not use any ECC correction.
> +
> nand-ecc-placement:
> allOf:
> - $ref: /schemas/types.yaml#/definitions/string
> --
> 2.20.1
>
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 72+ messages in thread
* Re: [PATCH v10 07/20] dt-bindings: mtd: Document boolean NAND ECC properties
2020-06-04 23:08 ` Rob Herring
(?)
@ 2020-06-05 7:18 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-05 7:18 UTC (permalink / raw)
To: Rob Herring
Cc: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus,
linux-mtd, Boris Brezillon, Thomas Petazzoni, linux-arm-kernel,
Mason Yang, Julien Su, Mark Rutland, devicetree
Hi Rob,
Rob Herring <robh@kernel.org> wrote on Thu, 4 Jun 2020 17:08:04 -0600:
> On Wed, Jun 03, 2020 at 07:57:46PM +0200, Miquel Raynal wrote:
> > Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties.
> > The former is here to force software correction, the latter prevents
> > any correction to happen.
> >
> > These properties (along with nand-ecc-engine) are supposed to be more
> > accurate than the current nand-ecc-modes wich is very misleading and
> > very often people think it is mandatory while the core should be
> > relied upon to decide which correction to handle.
> >
> > nand-ecc-mode was already inacurate, but it becomes totally
> > problematic with setups where there are several hardware engines.
> >
> > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > ---
> > Documentation/devicetree/bindings/mtd/nand-controller.yaml | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > index 0969d2e6720b..a3750978ebb8 100644
> > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > @@ -68,6 +68,12 @@ patternProperties:
> > 3/ The ECC engine is external, in this case the phandle should
> > reference the specific ECC engine node.
> >
> > + nand-use-soft-ecc-engine: true
> > + description: Use a software ECC engine.
>
> Humm, I'm surprised this is valid YAML. nand-use-soft-ecc-engine can't
> be both a boolean and a map (aka schema, aka dict).
>
> nand-use-soft-ecc-engine:
> type: boolean
> description: ...
>
Ok, I might have been inspired from this line in example-schema.yaml:
interrupt-controller: true
# The core checks this is a boolean, so just have to list it here to be
# valid for this binding.
Thanks for the review, I'll correct it.
Cheers,
Miquèl
^ permalink raw reply [flat|nested] 72+ messages in thread* Re: [PATCH v10 07/20] dt-bindings: mtd: Document boolean NAND ECC properties
@ 2020-06-05 7:18 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-05 7:18 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, devicetree, Vignesh Raghavendra, Tudor Ambarus,
Julien Su, Richard Weinberger, Boris Brezillon, linux-mtd,
Thomas Petazzoni, Mason Yang, linux-arm-kernel
Hi Rob,
Rob Herring <robh@kernel.org> wrote on Thu, 4 Jun 2020 17:08:04 -0600:
> On Wed, Jun 03, 2020 at 07:57:46PM +0200, Miquel Raynal wrote:
> > Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties.
> > The former is here to force software correction, the latter prevents
> > any correction to happen.
> >
> > These properties (along with nand-ecc-engine) are supposed to be more
> > accurate than the current nand-ecc-modes wich is very misleading and
> > very often people think it is mandatory while the core should be
> > relied upon to decide which correction to handle.
> >
> > nand-ecc-mode was already inacurate, but it becomes totally
> > problematic with setups where there are several hardware engines.
> >
> > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > ---
> > Documentation/devicetree/bindings/mtd/nand-controller.yaml | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > index 0969d2e6720b..a3750978ebb8 100644
> > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > @@ -68,6 +68,12 @@ patternProperties:
> > 3/ The ECC engine is external, in this case the phandle should
> > reference the specific ECC engine node.
> >
> > + nand-use-soft-ecc-engine: true
> > + description: Use a software ECC engine.
>
> Humm, I'm surprised this is valid YAML. nand-use-soft-ecc-engine can't
> be both a boolean and a map (aka schema, aka dict).
>
> nand-use-soft-ecc-engine:
> type: boolean
> description: ...
>
Ok, I might have been inspired from this line in example-schema.yaml:
interrupt-controller: true
# The core checks this is a boolean, so just have to list it here to be
# valid for this binding.
Thanks for the review, I'll correct it.
Cheers,
Miquèl
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 72+ messages in thread* Re: [PATCH v10 07/20] dt-bindings: mtd: Document boolean NAND ECC properties
@ 2020-06-05 7:18 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-05 7:18 UTC (permalink / raw)
To: Rob Herring
Cc: Mark Rutland, devicetree, Vignesh Raghavendra, Tudor Ambarus,
Julien Su, Richard Weinberger, Boris Brezillon, linux-mtd,
Thomas Petazzoni, Mason Yang, linux-arm-kernel
Hi Rob,
Rob Herring <robh@kernel.org> wrote on Thu, 4 Jun 2020 17:08:04 -0600:
> On Wed, Jun 03, 2020 at 07:57:46PM +0200, Miquel Raynal wrote:
> > Document nand-use-soft-ecc-engine and nand-no-ecc-engine properties.
> > The former is here to force software correction, the latter prevents
> > any correction to happen.
> >
> > These properties (along with nand-ecc-engine) are supposed to be more
> > accurate than the current nand-ecc-modes wich is very misleading and
> > very often people think it is mandatory while the core should be
> > relied upon to decide which correction to handle.
> >
> > nand-ecc-mode was already inacurate, but it becomes totally
> > problematic with setups where there are several hardware engines.
> >
> > Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> > ---
> > Documentation/devicetree/bindings/mtd/nand-controller.yaml | 6 ++++++
> > 1 file changed, 6 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > index 0969d2e6720b..a3750978ebb8 100644
> > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
> > @@ -68,6 +68,12 @@ patternProperties:
> > 3/ The ECC engine is external, in this case the phandle should
> > reference the specific ECC engine node.
> >
> > + nand-use-soft-ecc-engine: true
> > + description: Use a software ECC engine.
>
> Humm, I'm surprised this is valid YAML. nand-use-soft-ecc-engine can't
> be both a boolean and a map (aka schema, aka dict).
>
> nand-use-soft-ecc-engine:
> type: boolean
> description: ...
>
Ok, I might have been inspired from this line in example-schema.yaml:
interrupt-controller: true
# The core checks this is a boolean, so just have to list it here to be
# valid for this binding.
Thanks for the review, I'll correct it.
Cheers,
Miquèl
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply [flat|nested] 72+ messages in thread
* [PATCH v10 08/20] mtd: nand: Introduce the ECC engine framework
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Create a generic ECC engine framework. This is a base to instantiate ECC
engine objects.
If we really want to be generic, bindings must evolve, so here is the
new logic. The following three properties are mutually exclusive:
- The nand-no-ecc-engine boolean property is set and there is no
ECC engine to retrieve.
- The nand-use-soft-ecc-engine boolean property is set and the core
will force using the use of software correction.
- There is a nand-ecc-engine property pointing at a node which will
act as ECC engine.
It the later case, the property may reference:
- The NAND chip node itself (for the on-die ECC case).
- The parent node if the NAND controller embeds an ECC engine.
- Any other node being an external ECC controller as well.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/Kconfig | 8 +
drivers/mtd/nand/Makefile | 2 +
drivers/mtd/nand/ecc.c | 484 ++++++++++++++++++++++++++++++++++++++
include/linux/mtd/nand.h | 114 +++++++++
4 files changed, 608 insertions(+)
create mode 100644 drivers/mtd/nand/ecc.c
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c1a45b071165..4a9aed4f0104 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -9,4 +9,12 @@ source "drivers/mtd/nand/onenand/Kconfig"
source "drivers/mtd/nand/raw/Kconfig"
source "drivers/mtd/nand/spi/Kconfig"
+menu "ECC engine support"
+
+config MTD_NAND_ECC
+ bool
+ depends on MTD_NAND_CORE
+
+endmenu
+
endmenu
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 7ecd80c0a66e..981372953b56 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
obj-y += onenand/
obj-y += raw/
obj-y += spi/
+
+nandcore-$(CONFIG_MTD_NAND_ECC) += ecc.o
diff --git a/drivers/mtd/nand/ecc.c b/drivers/mtd/nand/ecc.c
new file mode 100644
index 000000000000..52de9c9775a0
--- /dev/null
+++ b/drivers/mtd/nand/ecc.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Generic Error-Correcting Code (ECC) engine
+ *
+ * Copyright (C) 2019 Macronix
+ * Author:
+ * Miquèl RAYNAL <miquel.raynal@bootlin.com>
+ *
+ *
+ * This file describes the abstraction of any NAND ECC engine. It has been
+ * designed to fit most cases, including parallel NANDs and SPI-NANDs.
+ *
+ * There are three main situations where instantiating this ECC engine makes
+ * sense:
+ * - external: The ECC engine is outside the NAND pipeline, typically this
+ * is a software ECC engine, or an hardware engine that is
+ * outside the NAND controller pipeline.
+ * - pipelined: The ECC engine is inside the NAND pipeline, ie. on the
+ * controller's side. This is the case of most of the raw NAND
+ * controllers. In the pipeline case, the ECC bytes are
+ * generated/data corrected on the fly when a page is
+ * written/read.
+ * - ondie: The ECC engine is inside the NAND pipeline, on the chip's side.
+ * Some NAND chips can correct themselves the data.
+ *
+ * Besides the initial setup and final cleanups, the interfaces are rather
+ * simple:
+ * - prepare: Prepare an I/O request. Enable/disable the ECC engine based on
+ * the I/O request type. In case of software correction or external
+ * engine, this step may involve to derive the ECC bytes and place
+ * them in the OOB area before a write.
+ * - finish: Finish an I/O request. Correct the data in case of a read
+ * request and report the number of corrected bits/uncorrectable
+ * errors. Most likely empty for write operations, unless you have
+ * hardware specific stuff to do, like shutting down the engine to
+ * save power.
+ *
+ * The I/O request should be enclosed in a prepare()/finish() pair of calls
+ * and will behave differently depending on the requested I/O type:
+ * - raw: Correction disabled
+ * - ecc: Correction enabled
+ *
+ * The request direction is impacting the logic as well:
+ * - read: Load data from the NAND chip
+ * - write: Store data in the NAND chip
+ *
+ * Mixing all this combinations together gives the following behavior.
+ * Those are just examples, drivers are free to add custom steps in their
+ * prepare/finish hook.
+ *
+ * [external ECC engine]
+ * - external + prepare + raw + read: do nothing
+ * - external + finish + raw + read: do nothing
+ * - external + prepare + raw + write: do nothing
+ * - external + finish + raw + write: do nothing
+ * - external + prepare + ecc + read: do nothing
+ * - external + finish + ecc + read: calculate expected ECC bytes, extract
+ * ECC bytes from OOB buffer, correct
+ * and report any bitflip/error
+ * - external + prepare + ecc + write: calculate ECC bytes and store them at
+ * the right place in the OOB buffer based
+ * on the OOB layout
+ * - external + finish + ecc + write: do nothing
+ *
+ * [pipelined ECC engine]
+ * - pipelined + prepare + raw + read: disable the controller's ECC engine if
+ * activated
+ * - pipelined + finish + raw + read: do nothing
+ * - pipelined + prepare + raw + write: disable the controller's ECC engine if
+ * activated
+ * - pipelined + finish + raw + write: do nothing
+ * - pipelined + prepare + ecc + read: enable the controller's ECC engine if
+ * deactivated
+ * - pipelined + finish + ecc + read: check the status, report any
+ * error/bitflip
+ * - pipelined + prepare + ecc + write: enable the controller's ECC engine if
+ * deactivated
+ * - pipelined + finish + ecc + write: do nothing
+ *
+ * [ondie ECC engine]
+ * - ondie + prepare + raw + read: send commands to disable the on-chip ECC
+ * engine if activated
+ * - ondie + finish + raw + read: do nothing
+ * - ondie + prepare + raw + write: send commands to disable the on-chip ECC
+ * engine if activated
+ * - ondie + finish + raw + write: do nothing
+ * - ondie + prepare + ecc + read: send commands to enable the on-chip ECC
+ * engine if deactivated
+ * - ondie + finish + ecc + read: send commands to check the status, report
+ * any error/bitflip
+ * - ondie + prepare + ecc + write: send commands to enable the on-chip ECC
+ * engine if deactivated
+ * - ondie + finish + ecc + write: do nothing
+ */
+
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+
+/**
+ * nand_ecc_init_ctx - Init the ECC engine context
+ * @nand: the NAND device
+ *
+ * On success, the caller is responsible of calling @nand_ecc_cleanup_ctx().
+ */
+int nand_ecc_init_ctx(struct nand_device *nand)
+{
+ if (!nand->ecc.engine->ops->init_ctx)
+ return 0;
+
+ return nand->ecc.engine->ops->init_ctx(nand);
+}
+EXPORT_SYMBOL(nand_ecc_init_ctx);
+
+/**
+ * nand_ecc_cleanup_ctx - Cleanup the ECC engine context
+ * @nand: the NAND device
+ */
+void nand_ecc_cleanup_ctx(struct nand_device *nand)
+{
+ if (nand->ecc.engine->ops->cleanup_ctx)
+ nand->ecc.engine->ops->cleanup_ctx(nand);
+}
+EXPORT_SYMBOL(nand_ecc_cleanup_ctx);
+
+/**
+ * nand_ecc_prepare_io_req - Prepare an I/O request
+ * @nand: the NAND device
+ * @req: the I/O request
+ */
+int nand_ecc_prepare_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req)
+{
+ if (!nand->ecc.engine->ops->prepare_io_req)
+ return 0;
+
+ return nand->ecc.engine->ops->prepare_io_req(nand, req);
+}
+EXPORT_SYMBOL(nand_ecc_prepare_io_req);
+
+/**
+ * nand_ecc_finish_io_req - Finish an I/O request
+ * @nand: the NAND device
+ * @req: the I/O request
+ */
+int nand_ecc_finish_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req)
+{
+ if (!nand->ecc.engine->ops->finish_io_req)
+ return 0;
+
+ return nand->ecc.engine->ops->finish_io_req(nand, req);
+}
+EXPORT_SYMBOL(nand_ecc_finish_io_req);
+
+/* Define default OOB placement schemes for large and small page devices */
+static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section > 1)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ if (mtd->oobsize == 16)
+ oobregion->length = 4;
+ else
+ oobregion->length = 3;
+ } else {
+ if (mtd->oobsize == 8)
+ return -ERANGE;
+
+ oobregion->offset = 6;
+ oobregion->length = total_ecc_bytes - 4;
+ }
+
+ return 0;
+}
+
+static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ if (mtd->oobsize == 16) {
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 8;
+ oobregion->offset = 8;
+ } else {
+ oobregion->length = 2;
+ if (!section)
+ oobregion->offset = 3;
+ else
+ oobregion->offset = 6;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
+ .ecc = nand_ooblayout_ecc_sp,
+ .free = nand_ooblayout_free_sp,
+};
+
+const struct mtd_ooblayout_ops *nand_get_small_page_ooblayout(void)
+{
+ return &nand_ooblayout_sp_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_small_page_ooblayout);
+
+static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section || !total_ecc_bytes)
+ return -ERANGE;
+
+ oobregion->length = total_ecc_bytes;
+ oobregion->offset = mtd->oobsize - oobregion->length;
+
+ return 0;
+}
+
+static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = mtd->oobsize - total_ecc_bytes - 2;
+ oobregion->offset = 2;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
+ .ecc = nand_ooblayout_ecc_lp,
+ .free = nand_ooblayout_free_lp,
+};
+
+const struct mtd_ooblayout_ops *nand_get_large_page_ooblayout(void)
+{
+ return &nand_ooblayout_lp_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_large_page_ooblayout);
+
+/*
+ * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
+ * are placed at a fixed offset.
+ */
+static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section)
+ return -ERANGE;
+
+ switch (mtd->oobsize) {
+ case 64:
+ oobregion->offset = 40;
+ break;
+ case 128:
+ oobregion->offset = 80;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ oobregion->length = total_ecc_bytes;
+ if (oobregion->offset + oobregion->length > mtd->oobsize)
+ return -ERANGE;
+
+ return 0;
+}
+
+static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+ int ecc_offset = 0;
+
+ if (section < 0 || section > 1)
+ return -ERANGE;
+
+ switch (mtd->oobsize) {
+ case 64:
+ ecc_offset = 40;
+ break;
+ case 128:
+ ecc_offset = 80;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (section == 0) {
+ oobregion->offset = 2;
+ oobregion->length = ecc_offset - 2;
+ } else {
+ oobregion->offset = ecc_offset + total_ecc_bytes;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
+ .ecc = nand_ooblayout_ecc_lp_hamming,
+ .free = nand_ooblayout_free_lp_hamming,
+};
+
+const struct mtd_ooblayout_ops *nand_get_large_page_hamming_ooblayout(void)
+{
+ return &nand_ooblayout_lp_hamming_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_large_page_hamming_ooblayout);
+
+static enum nand_ecc_engine_type
+of_get_nand_ecc_engine_type(struct device_node *np)
+{
+ struct device_node *eng_np;
+
+ if (of_property_read_bool(np, "nand-no-ecc-engine"))
+ return NAND_ECC_ENGINE_TYPE_NONE;
+
+ if (of_property_read_bool(np, "nand-use-soft-ecc-engine"))
+ return NAND_ECC_ENGINE_TYPE_SOFT;
+
+ eng_np = of_parse_phandle(np, "nand-ecc-engine", 0);
+ of_node_put(eng_np);
+
+ if (eng_np) {
+ if (eng_np == np)
+ return NAND_ECC_ENGINE_TYPE_ON_DIE;
+ else
+ return NAND_ECC_ENGINE_TYPE_ON_HOST;
+ }
+
+ return NAND_ECC_ENGINE_TYPE_INVALID;
+}
+
+static const char * const nand_ecc_placement[] = {
+ [NAND_ECC_PLACEMENT_OOB] = "oob",
+ [NAND_ECC_PLACEMENT_INTERLEAVED] = "interleaved",
+};
+
+enum nand_ecc_placement of_get_nand_ecc_placement(struct device_node *np)
+{
+ enum nand_ecc_placement placement;
+ const char *pm;
+ int err;
+
+ err = of_property_read_string(np, "nand-ecc-placement", &pm);
+ if (!err) {
+ for (placement = NAND_ECC_PLACEMENT_OOB;
+ placement < ARRAY_SIZE(nand_ecc_placement); placement++) {
+ if (!strcasecmp(pm, nand_ecc_placement[placement]))
+ return placement;
+ }
+ }
+
+ return NAND_ECC_PLACEMENT_UNKNOWN;
+}
+
+static const char * const nand_ecc_algos[] = {
+ [NAND_ECC_ALGO_HAMMING] = "hamming",
+ [NAND_ECC_ALGO_BCH] = "bch",
+ [NAND_ECC_ALGO_RS] = "rs",
+};
+
+static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
+{
+ enum nand_ecc_algo ecc_algo;
+ const char *pm;
+ int err;
+
+ err = of_property_read_string(np, "nand-ecc-algo", &pm);
+ if (!err) {
+ for (ecc_algo = NAND_ECC_ALGO_HAMMING;
+ ecc_algo < ARRAY_SIZE(nand_ecc_algos);
+ ecc_algo++) {
+ if (!strcasecmp(pm, nand_ecc_algos[ecc_algo]))
+ return ecc_algo;
+ }
+ }
+
+ return NAND_ECC_ALGO_UNKNOWN;
+}
+
+static int of_get_nand_ecc_step_size(struct device_node *np)
+{
+ int ret;
+ u32 val;
+
+ ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
+ return ret ? ret : val;
+}
+
+static int of_get_nand_ecc_strength(struct device_node *np)
+{
+ int ret;
+ u32 val;
+
+ ret = of_property_read_u32(np, "nand-ecc-strength", &val);
+ return ret ? ret : val;
+}
+
+void of_get_nand_ecc_user_config(struct nand_device *nand)
+{
+ struct device_node *dn = nanddev_get_of_node(nand);
+ int strength, size;
+
+ nand->ecc.user_conf.engine_type = of_get_nand_ecc_engine_type(dn);
+ nand->ecc.user_conf.algo = of_get_nand_ecc_algo(dn);
+ nand->ecc.user_conf.placement = of_get_nand_ecc_placement(dn);
+
+ strength = of_get_nand_ecc_strength(dn);
+ if (strength >= 0)
+ nand->ecc.user_conf.strength = strength;
+
+ size = of_get_nand_ecc_step_size(dn);
+ if (size >= 0)
+ nand->ecc.user_conf.step_size = size;
+
+ if (of_property_read_bool(dn, "nand-ecc-maximize"))
+ nand->ecc.user_conf.flags |= NAND_ECC_MAXIMIZE_STRENGTH;
+}
+EXPORT_SYMBOL(of_get_nand_ecc_user_config);
+
+/**
+ * nand_ecc_is_strong_enough - Check if the chip configuration meets the
+ * datasheet requirements.
+ *
+ * @nand: Device to check
+ *
+ * If our configuration corrects A bits per B bytes and the minimum
+ * required correction level is X bits per Y bytes, then we must ensure
+ * both of the following are true:
+ *
+ * (1) A / B >= X / Y
+ * (2) A >= X
+ *
+ * Requirement (1) ensures we can correct for the required bitflip density.
+ * Requirement (2) ensures we can correct even when all bitflips are clumped
+ * in the same sector.
+ */
+bool nand_ecc_is_strong_enough(struct nand_device *nand)
+{
+ const struct nand_ecc_props *reqs = nanddev_get_ecc_requirements(nand);
+ const struct nand_ecc_props *conf = nanddev_get_ecc_conf(nand);
+ struct mtd_info *mtd = nanddev_to_mtd(nand);
+ int corr, ds_corr;
+
+ if (conf->step_size == 0 || reqs->step_size == 0)
+ /* Not enough information */
+ return true;
+
+ /*
+ * We get the number of corrected bits per page to compare
+ * the correction density.
+ */
+ corr = (mtd->writesize * conf->strength) / conf->step_size;
+ ds_corr = (mtd->writesize * reqs->strength) / reqs->step_size;
+
+ return corr >= ds_corr && conf->strength >= reqs->strength;
+}
+EXPORT_SYMBOL(nand_ecc_is_strong_enough);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("Generic ECC engine");
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index e754a6fc8a4b..8cf5bdbea782 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -127,6 +127,40 @@ struct nand_page_io_req {
int mode;
};
+const struct mtd_ooblayout_ops *nand_get_small_page_ooblayout(void);
+const struct mtd_ooblayout_ops *nand_get_large_page_ooblayout(void);
+const struct mtd_ooblayout_ops *nand_get_large_page_hamming_ooblayout(void);
+
+/**
+ * enum nand_ecc_engine_type - NAND ECC engine type
+ * @NAND_ECC_ENGINE_TYPE_INVALID: Invalid value
+ * @NAND_ECC_ENGINE_TYPE_NONE: No ECC correction
+ * @NAND_ECC_ENGINE_TYPE_SOFT: Software ECC correction
+ * @NAND_ECC_ENGINE_TYPE_ON_HOST: On host hardware ECC correction
+ * @NAND_ECC_ENGINE_TYPE_ON_DIE: On chip hardware ECC correction
+ */
+enum nand_ecc_engine_type {
+ NAND_ECC_ENGINE_TYPE_INVALID,
+ NAND_ECC_ENGINE_TYPE_NONE,
+ NAND_ECC_ENGINE_TYPE_SOFT,
+ NAND_ECC_ENGINE_TYPE_ON_HOST,
+ NAND_ECC_ENGINE_TYPE_ON_DIE,
+};
+
+/**
+ * enum nand_ecc_placement - NAND ECC bytes placement
+ * @NAND_ECC_PLACEMENT_UNKNOWN: The actual position of the ECC bytes is unknown
+ * @NAND_ECC_PLACEMENT_OOB: The ECC bytes are located in the OOB area
+ * @NAND_ECC_PLACEMENT_INTERLEAVED: Syndrome layout, there are ECC bytes
+ * interleaved with regular data in the main
+ * area
+ */
+enum nand_ecc_placement {
+ NAND_ECC_PLACEMENT_UNKNOWN,
+ NAND_ECC_PLACEMENT_OOB,
+ NAND_ECC_PLACEMENT_INTERLEAVED,
+};
+
/**
* enum nand_ecc_algo - NAND ECC algorithm
* @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
@@ -143,16 +177,27 @@ enum nand_ecc_algo {
/**
* struct nand_ecc_props - NAND ECC properties
+ * @engine_type: ECC engine type
+ * @placement: OOB placement (if relevant)
+ * @algo: ECC algorithm (if relevant)
* @strength: ECC strength
* @step_size: Number of bytes per step
+ * @flags: Misc properties
*/
struct nand_ecc_props {
+ enum nand_ecc_engine_type engine_type;
+ enum nand_ecc_placement placement;
+ enum nand_ecc_algo algo;
unsigned int strength;
unsigned int step_size;
+ unsigned int flags;
};
#define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) }
+/* NAND ECC misc flags */
+#define NAND_ECC_MAXIMIZE_STRENGTH BIT(0)
+
/**
* struct nand_bbt - bad block table object
* @cache: in memory BBT cache
@@ -183,6 +228,75 @@ struct nand_ops {
bool (*isbad)(struct nand_device *nand, const struct nand_pos *pos);
};
+/**
+ * struct nand_ecc_context - Context for the ECC engine
+ * @conf: basic ECC engine parameters
+ * @total: total number of bytes used for storing ECC codes, this is used by
+ * generic OOB layouts
+ * @priv: ECC engine driver private data
+ */
+struct nand_ecc_context {
+ struct nand_ecc_props conf;
+ unsigned int total;
+ void *priv;
+};
+
+/**
+ * struct nand_ecc_engine_ops - ECC engine operations
+ * @init_ctx: given a desired user configuration for the pointed NAND device,
+ * requests the ECC engine driver to setup a configuration with
+ * values it supports.
+ * @cleanup_ctx: clean the context initialized by @init_ctx.
+ * @prepare_io_req: is called before reading/writing a page to prepare the I/O
+ * request to be performed with ECC correction.
+ * @finish_io_req: is called after reading/writing a page to terminate the I/O
+ * request and ensure proper ECC correction.
+ */
+struct nand_ecc_engine_ops {
+ int (*init_ctx)(struct nand_device *nand);
+ void (*cleanup_ctx)(struct nand_device *nand);
+ int (*prepare_io_req)(struct nand_device *nand,
+ struct nand_page_io_req *req);
+ int (*finish_io_req)(struct nand_device *nand,
+ struct nand_page_io_req *req);
+};
+
+/**
+ * struct nand_ecc_engine - ECC engine abstraction for NAND devices
+ * @ops: ECC engine operations
+ */
+struct nand_ecc_engine {
+ struct nand_ecc_engine_ops *ops;
+};
+
+void of_get_nand_ecc_user_config(struct nand_device *nand);
+int nand_ecc_init_ctx(struct nand_device *nand);
+void nand_ecc_cleanup_ctx(struct nand_device *nand);
+int nand_ecc_prepare_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req);
+int nand_ecc_finish_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req);
+bool nand_ecc_is_strong_enough(struct nand_device *nand);
+
+/**
+ * struct nand_ecc - Information relative to the ECC
+ * @defaults: Default values, depend on the underlying subsystem
+ * @requirements: ECC requirements from the NAND chip perspective
+ * @user_conf: User desires in terms of ECC parameters
+ * @ctx: ECC context for the ECC engine, derived from the device @requirements
+ * the @user_conf and the @defaults
+ * @ondie_engine: On-die ECC engine reference, if any
+ * @engine: ECC engine actually bound
+ */
+struct nand_ecc {
+ struct nand_ecc_props defaults;
+ struct nand_ecc_props requirements;
+ struct nand_ecc_props user_conf;
+ struct nand_ecc_context ctx;
+ struct nand_ecc_engine *ondie_engine;
+ struct nand_ecc_engine *engine;
+};
+
/**
* struct nand_device - NAND device
* @mtd: MTD instance attached to the NAND device
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 08/20] mtd: nand: Introduce the ECC engine framework
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Create a generic ECC engine framework. This is a base to instantiate ECC
engine objects.
If we really want to be generic, bindings must evolve, so here is the
new logic. The following three properties are mutually exclusive:
- The nand-no-ecc-engine boolean property is set and there is no
ECC engine to retrieve.
- The nand-use-soft-ecc-engine boolean property is set and the core
will force using the use of software correction.
- There is a nand-ecc-engine property pointing at a node which will
act as ECC engine.
It the later case, the property may reference:
- The NAND chip node itself (for the on-die ECC case).
- The parent node if the NAND controller embeds an ECC engine.
- Any other node being an external ECC controller as well.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/Kconfig | 8 +
drivers/mtd/nand/Makefile | 2 +
drivers/mtd/nand/ecc.c | 484 ++++++++++++++++++++++++++++++++++++++
include/linux/mtd/nand.h | 114 +++++++++
4 files changed, 608 insertions(+)
create mode 100644 drivers/mtd/nand/ecc.c
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c1a45b071165..4a9aed4f0104 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -9,4 +9,12 @@ source "drivers/mtd/nand/onenand/Kconfig"
source "drivers/mtd/nand/raw/Kconfig"
source "drivers/mtd/nand/spi/Kconfig"
+menu "ECC engine support"
+
+config MTD_NAND_ECC
+ bool
+ depends on MTD_NAND_CORE
+
+endmenu
+
endmenu
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 7ecd80c0a66e..981372953b56 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
obj-y += onenand/
obj-y += raw/
obj-y += spi/
+
+nandcore-$(CONFIG_MTD_NAND_ECC) += ecc.o
diff --git a/drivers/mtd/nand/ecc.c b/drivers/mtd/nand/ecc.c
new file mode 100644
index 000000000000..52de9c9775a0
--- /dev/null
+++ b/drivers/mtd/nand/ecc.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Generic Error-Correcting Code (ECC) engine
+ *
+ * Copyright (C) 2019 Macronix
+ * Author:
+ * Miquèl RAYNAL <miquel.raynal@bootlin.com>
+ *
+ *
+ * This file describes the abstraction of any NAND ECC engine. It has been
+ * designed to fit most cases, including parallel NANDs and SPI-NANDs.
+ *
+ * There are three main situations where instantiating this ECC engine makes
+ * sense:
+ * - external: The ECC engine is outside the NAND pipeline, typically this
+ * is a software ECC engine, or an hardware engine that is
+ * outside the NAND controller pipeline.
+ * - pipelined: The ECC engine is inside the NAND pipeline, ie. on the
+ * controller's side. This is the case of most of the raw NAND
+ * controllers. In the pipeline case, the ECC bytes are
+ * generated/data corrected on the fly when a page is
+ * written/read.
+ * - ondie: The ECC engine is inside the NAND pipeline, on the chip's side.
+ * Some NAND chips can correct themselves the data.
+ *
+ * Besides the initial setup and final cleanups, the interfaces are rather
+ * simple:
+ * - prepare: Prepare an I/O request. Enable/disable the ECC engine based on
+ * the I/O request type. In case of software correction or external
+ * engine, this step may involve to derive the ECC bytes and place
+ * them in the OOB area before a write.
+ * - finish: Finish an I/O request. Correct the data in case of a read
+ * request and report the number of corrected bits/uncorrectable
+ * errors. Most likely empty for write operations, unless you have
+ * hardware specific stuff to do, like shutting down the engine to
+ * save power.
+ *
+ * The I/O request should be enclosed in a prepare()/finish() pair of calls
+ * and will behave differently depending on the requested I/O type:
+ * - raw: Correction disabled
+ * - ecc: Correction enabled
+ *
+ * The request direction is impacting the logic as well:
+ * - read: Load data from the NAND chip
+ * - write: Store data in the NAND chip
+ *
+ * Mixing all this combinations together gives the following behavior.
+ * Those are just examples, drivers are free to add custom steps in their
+ * prepare/finish hook.
+ *
+ * [external ECC engine]
+ * - external + prepare + raw + read: do nothing
+ * - external + finish + raw + read: do nothing
+ * - external + prepare + raw + write: do nothing
+ * - external + finish + raw + write: do nothing
+ * - external + prepare + ecc + read: do nothing
+ * - external + finish + ecc + read: calculate expected ECC bytes, extract
+ * ECC bytes from OOB buffer, correct
+ * and report any bitflip/error
+ * - external + prepare + ecc + write: calculate ECC bytes and store them at
+ * the right place in the OOB buffer based
+ * on the OOB layout
+ * - external + finish + ecc + write: do nothing
+ *
+ * [pipelined ECC engine]
+ * - pipelined + prepare + raw + read: disable the controller's ECC engine if
+ * activated
+ * - pipelined + finish + raw + read: do nothing
+ * - pipelined + prepare + raw + write: disable the controller's ECC engine if
+ * activated
+ * - pipelined + finish + raw + write: do nothing
+ * - pipelined + prepare + ecc + read: enable the controller's ECC engine if
+ * deactivated
+ * - pipelined + finish + ecc + read: check the status, report any
+ * error/bitflip
+ * - pipelined + prepare + ecc + write: enable the controller's ECC engine if
+ * deactivated
+ * - pipelined + finish + ecc + write: do nothing
+ *
+ * [ondie ECC engine]
+ * - ondie + prepare + raw + read: send commands to disable the on-chip ECC
+ * engine if activated
+ * - ondie + finish + raw + read: do nothing
+ * - ondie + prepare + raw + write: send commands to disable the on-chip ECC
+ * engine if activated
+ * - ondie + finish + raw + write: do nothing
+ * - ondie + prepare + ecc + read: send commands to enable the on-chip ECC
+ * engine if deactivated
+ * - ondie + finish + ecc + read: send commands to check the status, report
+ * any error/bitflip
+ * - ondie + prepare + ecc + write: send commands to enable the on-chip ECC
+ * engine if deactivated
+ * - ondie + finish + ecc + write: do nothing
+ */
+
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+
+/**
+ * nand_ecc_init_ctx - Init the ECC engine context
+ * @nand: the NAND device
+ *
+ * On success, the caller is responsible of calling @nand_ecc_cleanup_ctx().
+ */
+int nand_ecc_init_ctx(struct nand_device *nand)
+{
+ if (!nand->ecc.engine->ops->init_ctx)
+ return 0;
+
+ return nand->ecc.engine->ops->init_ctx(nand);
+}
+EXPORT_SYMBOL(nand_ecc_init_ctx);
+
+/**
+ * nand_ecc_cleanup_ctx - Cleanup the ECC engine context
+ * @nand: the NAND device
+ */
+void nand_ecc_cleanup_ctx(struct nand_device *nand)
+{
+ if (nand->ecc.engine->ops->cleanup_ctx)
+ nand->ecc.engine->ops->cleanup_ctx(nand);
+}
+EXPORT_SYMBOL(nand_ecc_cleanup_ctx);
+
+/**
+ * nand_ecc_prepare_io_req - Prepare an I/O request
+ * @nand: the NAND device
+ * @req: the I/O request
+ */
+int nand_ecc_prepare_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req)
+{
+ if (!nand->ecc.engine->ops->prepare_io_req)
+ return 0;
+
+ return nand->ecc.engine->ops->prepare_io_req(nand, req);
+}
+EXPORT_SYMBOL(nand_ecc_prepare_io_req);
+
+/**
+ * nand_ecc_finish_io_req - Finish an I/O request
+ * @nand: the NAND device
+ * @req: the I/O request
+ */
+int nand_ecc_finish_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req)
+{
+ if (!nand->ecc.engine->ops->finish_io_req)
+ return 0;
+
+ return nand->ecc.engine->ops->finish_io_req(nand, req);
+}
+EXPORT_SYMBOL(nand_ecc_finish_io_req);
+
+/* Define default OOB placement schemes for large and small page devices */
+static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section > 1)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ if (mtd->oobsize == 16)
+ oobregion->length = 4;
+ else
+ oobregion->length = 3;
+ } else {
+ if (mtd->oobsize == 8)
+ return -ERANGE;
+
+ oobregion->offset = 6;
+ oobregion->length = total_ecc_bytes - 4;
+ }
+
+ return 0;
+}
+
+static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ if (mtd->oobsize == 16) {
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 8;
+ oobregion->offset = 8;
+ } else {
+ oobregion->length = 2;
+ if (!section)
+ oobregion->offset = 3;
+ else
+ oobregion->offset = 6;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
+ .ecc = nand_ooblayout_ecc_sp,
+ .free = nand_ooblayout_free_sp,
+};
+
+const struct mtd_ooblayout_ops *nand_get_small_page_ooblayout(void)
+{
+ return &nand_ooblayout_sp_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_small_page_ooblayout);
+
+static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section || !total_ecc_bytes)
+ return -ERANGE;
+
+ oobregion->length = total_ecc_bytes;
+ oobregion->offset = mtd->oobsize - oobregion->length;
+
+ return 0;
+}
+
+static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = mtd->oobsize - total_ecc_bytes - 2;
+ oobregion->offset = 2;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
+ .ecc = nand_ooblayout_ecc_lp,
+ .free = nand_ooblayout_free_lp,
+};
+
+const struct mtd_ooblayout_ops *nand_get_large_page_ooblayout(void)
+{
+ return &nand_ooblayout_lp_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_large_page_ooblayout);
+
+/*
+ * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
+ * are placed at a fixed offset.
+ */
+static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section)
+ return -ERANGE;
+
+ switch (mtd->oobsize) {
+ case 64:
+ oobregion->offset = 40;
+ break;
+ case 128:
+ oobregion->offset = 80;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ oobregion->length = total_ecc_bytes;
+ if (oobregion->offset + oobregion->length > mtd->oobsize)
+ return -ERANGE;
+
+ return 0;
+}
+
+static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+ int ecc_offset = 0;
+
+ if (section < 0 || section > 1)
+ return -ERANGE;
+
+ switch (mtd->oobsize) {
+ case 64:
+ ecc_offset = 40;
+ break;
+ case 128:
+ ecc_offset = 80;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (section == 0) {
+ oobregion->offset = 2;
+ oobregion->length = ecc_offset - 2;
+ } else {
+ oobregion->offset = ecc_offset + total_ecc_bytes;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
+ .ecc = nand_ooblayout_ecc_lp_hamming,
+ .free = nand_ooblayout_free_lp_hamming,
+};
+
+const struct mtd_ooblayout_ops *nand_get_large_page_hamming_ooblayout(void)
+{
+ return &nand_ooblayout_lp_hamming_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_large_page_hamming_ooblayout);
+
+static enum nand_ecc_engine_type
+of_get_nand_ecc_engine_type(struct device_node *np)
+{
+ struct device_node *eng_np;
+
+ if (of_property_read_bool(np, "nand-no-ecc-engine"))
+ return NAND_ECC_ENGINE_TYPE_NONE;
+
+ if (of_property_read_bool(np, "nand-use-soft-ecc-engine"))
+ return NAND_ECC_ENGINE_TYPE_SOFT;
+
+ eng_np = of_parse_phandle(np, "nand-ecc-engine", 0);
+ of_node_put(eng_np);
+
+ if (eng_np) {
+ if (eng_np == np)
+ return NAND_ECC_ENGINE_TYPE_ON_DIE;
+ else
+ return NAND_ECC_ENGINE_TYPE_ON_HOST;
+ }
+
+ return NAND_ECC_ENGINE_TYPE_INVALID;
+}
+
+static const char * const nand_ecc_placement[] = {
+ [NAND_ECC_PLACEMENT_OOB] = "oob",
+ [NAND_ECC_PLACEMENT_INTERLEAVED] = "interleaved",
+};
+
+enum nand_ecc_placement of_get_nand_ecc_placement(struct device_node *np)
+{
+ enum nand_ecc_placement placement;
+ const char *pm;
+ int err;
+
+ err = of_property_read_string(np, "nand-ecc-placement", &pm);
+ if (!err) {
+ for (placement = NAND_ECC_PLACEMENT_OOB;
+ placement < ARRAY_SIZE(nand_ecc_placement); placement++) {
+ if (!strcasecmp(pm, nand_ecc_placement[placement]))
+ return placement;
+ }
+ }
+
+ return NAND_ECC_PLACEMENT_UNKNOWN;
+}
+
+static const char * const nand_ecc_algos[] = {
+ [NAND_ECC_ALGO_HAMMING] = "hamming",
+ [NAND_ECC_ALGO_BCH] = "bch",
+ [NAND_ECC_ALGO_RS] = "rs",
+};
+
+static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
+{
+ enum nand_ecc_algo ecc_algo;
+ const char *pm;
+ int err;
+
+ err = of_property_read_string(np, "nand-ecc-algo", &pm);
+ if (!err) {
+ for (ecc_algo = NAND_ECC_ALGO_HAMMING;
+ ecc_algo < ARRAY_SIZE(nand_ecc_algos);
+ ecc_algo++) {
+ if (!strcasecmp(pm, nand_ecc_algos[ecc_algo]))
+ return ecc_algo;
+ }
+ }
+
+ return NAND_ECC_ALGO_UNKNOWN;
+}
+
+static int of_get_nand_ecc_step_size(struct device_node *np)
+{
+ int ret;
+ u32 val;
+
+ ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
+ return ret ? ret : val;
+}
+
+static int of_get_nand_ecc_strength(struct device_node *np)
+{
+ int ret;
+ u32 val;
+
+ ret = of_property_read_u32(np, "nand-ecc-strength", &val);
+ return ret ? ret : val;
+}
+
+void of_get_nand_ecc_user_config(struct nand_device *nand)
+{
+ struct device_node *dn = nanddev_get_of_node(nand);
+ int strength, size;
+
+ nand->ecc.user_conf.engine_type = of_get_nand_ecc_engine_type(dn);
+ nand->ecc.user_conf.algo = of_get_nand_ecc_algo(dn);
+ nand->ecc.user_conf.placement = of_get_nand_ecc_placement(dn);
+
+ strength = of_get_nand_ecc_strength(dn);
+ if (strength >= 0)
+ nand->ecc.user_conf.strength = strength;
+
+ size = of_get_nand_ecc_step_size(dn);
+ if (size >= 0)
+ nand->ecc.user_conf.step_size = size;
+
+ if (of_property_read_bool(dn, "nand-ecc-maximize"))
+ nand->ecc.user_conf.flags |= NAND_ECC_MAXIMIZE_STRENGTH;
+}
+EXPORT_SYMBOL(of_get_nand_ecc_user_config);
+
+/**
+ * nand_ecc_is_strong_enough - Check if the chip configuration meets the
+ * datasheet requirements.
+ *
+ * @nand: Device to check
+ *
+ * If our configuration corrects A bits per B bytes and the minimum
+ * required correction level is X bits per Y bytes, then we must ensure
+ * both of the following are true:
+ *
+ * (1) A / B >= X / Y
+ * (2) A >= X
+ *
+ * Requirement (1) ensures we can correct for the required bitflip density.
+ * Requirement (2) ensures we can correct even when all bitflips are clumped
+ * in the same sector.
+ */
+bool nand_ecc_is_strong_enough(struct nand_device *nand)
+{
+ const struct nand_ecc_props *reqs = nanddev_get_ecc_requirements(nand);
+ const struct nand_ecc_props *conf = nanddev_get_ecc_conf(nand);
+ struct mtd_info *mtd = nanddev_to_mtd(nand);
+ int corr, ds_corr;
+
+ if (conf->step_size == 0 || reqs->step_size == 0)
+ /* Not enough information */
+ return true;
+
+ /*
+ * We get the number of corrected bits per page to compare
+ * the correction density.
+ */
+ corr = (mtd->writesize * conf->strength) / conf->step_size;
+ ds_corr = (mtd->writesize * reqs->strength) / reqs->step_size;
+
+ return corr >= ds_corr && conf->strength >= reqs->strength;
+}
+EXPORT_SYMBOL(nand_ecc_is_strong_enough);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("Generic ECC engine");
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index e754a6fc8a4b..8cf5bdbea782 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -127,6 +127,40 @@ struct nand_page_io_req {
int mode;
};
+const struct mtd_ooblayout_ops *nand_get_small_page_ooblayout(void);
+const struct mtd_ooblayout_ops *nand_get_large_page_ooblayout(void);
+const struct mtd_ooblayout_ops *nand_get_large_page_hamming_ooblayout(void);
+
+/**
+ * enum nand_ecc_engine_type - NAND ECC engine type
+ * @NAND_ECC_ENGINE_TYPE_INVALID: Invalid value
+ * @NAND_ECC_ENGINE_TYPE_NONE: No ECC correction
+ * @NAND_ECC_ENGINE_TYPE_SOFT: Software ECC correction
+ * @NAND_ECC_ENGINE_TYPE_ON_HOST: On host hardware ECC correction
+ * @NAND_ECC_ENGINE_TYPE_ON_DIE: On chip hardware ECC correction
+ */
+enum nand_ecc_engine_type {
+ NAND_ECC_ENGINE_TYPE_INVALID,
+ NAND_ECC_ENGINE_TYPE_NONE,
+ NAND_ECC_ENGINE_TYPE_SOFT,
+ NAND_ECC_ENGINE_TYPE_ON_HOST,
+ NAND_ECC_ENGINE_TYPE_ON_DIE,
+};
+
+/**
+ * enum nand_ecc_placement - NAND ECC bytes placement
+ * @NAND_ECC_PLACEMENT_UNKNOWN: The actual position of the ECC bytes is unknown
+ * @NAND_ECC_PLACEMENT_OOB: The ECC bytes are located in the OOB area
+ * @NAND_ECC_PLACEMENT_INTERLEAVED: Syndrome layout, there are ECC bytes
+ * interleaved with regular data in the main
+ * area
+ */
+enum nand_ecc_placement {
+ NAND_ECC_PLACEMENT_UNKNOWN,
+ NAND_ECC_PLACEMENT_OOB,
+ NAND_ECC_PLACEMENT_INTERLEAVED,
+};
+
/**
* enum nand_ecc_algo - NAND ECC algorithm
* @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
@@ -143,16 +177,27 @@ enum nand_ecc_algo {
/**
* struct nand_ecc_props - NAND ECC properties
+ * @engine_type: ECC engine type
+ * @placement: OOB placement (if relevant)
+ * @algo: ECC algorithm (if relevant)
* @strength: ECC strength
* @step_size: Number of bytes per step
+ * @flags: Misc properties
*/
struct nand_ecc_props {
+ enum nand_ecc_engine_type engine_type;
+ enum nand_ecc_placement placement;
+ enum nand_ecc_algo algo;
unsigned int strength;
unsigned int step_size;
+ unsigned int flags;
};
#define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) }
+/* NAND ECC misc flags */
+#define NAND_ECC_MAXIMIZE_STRENGTH BIT(0)
+
/**
* struct nand_bbt - bad block table object
* @cache: in memory BBT cache
@@ -183,6 +228,75 @@ struct nand_ops {
bool (*isbad)(struct nand_device *nand, const struct nand_pos *pos);
};
+/**
+ * struct nand_ecc_context - Context for the ECC engine
+ * @conf: basic ECC engine parameters
+ * @total: total number of bytes used for storing ECC codes, this is used by
+ * generic OOB layouts
+ * @priv: ECC engine driver private data
+ */
+struct nand_ecc_context {
+ struct nand_ecc_props conf;
+ unsigned int total;
+ void *priv;
+};
+
+/**
+ * struct nand_ecc_engine_ops - ECC engine operations
+ * @init_ctx: given a desired user configuration for the pointed NAND device,
+ * requests the ECC engine driver to setup a configuration with
+ * values it supports.
+ * @cleanup_ctx: clean the context initialized by @init_ctx.
+ * @prepare_io_req: is called before reading/writing a page to prepare the I/O
+ * request to be performed with ECC correction.
+ * @finish_io_req: is called after reading/writing a page to terminate the I/O
+ * request and ensure proper ECC correction.
+ */
+struct nand_ecc_engine_ops {
+ int (*init_ctx)(struct nand_device *nand);
+ void (*cleanup_ctx)(struct nand_device *nand);
+ int (*prepare_io_req)(struct nand_device *nand,
+ struct nand_page_io_req *req);
+ int (*finish_io_req)(struct nand_device *nand,
+ struct nand_page_io_req *req);
+};
+
+/**
+ * struct nand_ecc_engine - ECC engine abstraction for NAND devices
+ * @ops: ECC engine operations
+ */
+struct nand_ecc_engine {
+ struct nand_ecc_engine_ops *ops;
+};
+
+void of_get_nand_ecc_user_config(struct nand_device *nand);
+int nand_ecc_init_ctx(struct nand_device *nand);
+void nand_ecc_cleanup_ctx(struct nand_device *nand);
+int nand_ecc_prepare_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req);
+int nand_ecc_finish_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req);
+bool nand_ecc_is_strong_enough(struct nand_device *nand);
+
+/**
+ * struct nand_ecc - Information relative to the ECC
+ * @defaults: Default values, depend on the underlying subsystem
+ * @requirements: ECC requirements from the NAND chip perspective
+ * @user_conf: User desires in terms of ECC parameters
+ * @ctx: ECC context for the ECC engine, derived from the device @requirements
+ * the @user_conf and the @defaults
+ * @ondie_engine: On-die ECC engine reference, if any
+ * @engine: ECC engine actually bound
+ */
+struct nand_ecc {
+ struct nand_ecc_props defaults;
+ struct nand_ecc_props requirements;
+ struct nand_ecc_props user_conf;
+ struct nand_ecc_context ctx;
+ struct nand_ecc_engine *ondie_engine;
+ struct nand_ecc_engine *engine;
+};
+
/**
* struct nand_device - NAND device
* @mtd: MTD instance attached to the NAND device
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 08/20] mtd: nand: Introduce the ECC engine framework
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Create a generic ECC engine framework. This is a base to instantiate ECC
engine objects.
If we really want to be generic, bindings must evolve, so here is the
new logic. The following three properties are mutually exclusive:
- The nand-no-ecc-engine boolean property is set and there is no
ECC engine to retrieve.
- The nand-use-soft-ecc-engine boolean property is set and the core
will force using the use of software correction.
- There is a nand-ecc-engine property pointing at a node which will
act as ECC engine.
It the later case, the property may reference:
- The NAND chip node itself (for the on-die ECC case).
- The parent node if the NAND controller embeds an ECC engine.
- Any other node being an external ECC controller as well.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/Kconfig | 8 +
drivers/mtd/nand/Makefile | 2 +
drivers/mtd/nand/ecc.c | 484 ++++++++++++++++++++++++++++++++++++++
include/linux/mtd/nand.h | 114 +++++++++
4 files changed, 608 insertions(+)
create mode 100644 drivers/mtd/nand/ecc.c
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c1a45b071165..4a9aed4f0104 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -9,4 +9,12 @@ source "drivers/mtd/nand/onenand/Kconfig"
source "drivers/mtd/nand/raw/Kconfig"
source "drivers/mtd/nand/spi/Kconfig"
+menu "ECC engine support"
+
+config MTD_NAND_ECC
+ bool
+ depends on MTD_NAND_CORE
+
+endmenu
+
endmenu
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 7ecd80c0a66e..981372953b56 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
obj-y += onenand/
obj-y += raw/
obj-y += spi/
+
+nandcore-$(CONFIG_MTD_NAND_ECC) += ecc.o
diff --git a/drivers/mtd/nand/ecc.c b/drivers/mtd/nand/ecc.c
new file mode 100644
index 000000000000..52de9c9775a0
--- /dev/null
+++ b/drivers/mtd/nand/ecc.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Generic Error-Correcting Code (ECC) engine
+ *
+ * Copyright (C) 2019 Macronix
+ * Author:
+ * Miquèl RAYNAL <miquel.raynal@bootlin.com>
+ *
+ *
+ * This file describes the abstraction of any NAND ECC engine. It has been
+ * designed to fit most cases, including parallel NANDs and SPI-NANDs.
+ *
+ * There are three main situations where instantiating this ECC engine makes
+ * sense:
+ * - external: The ECC engine is outside the NAND pipeline, typically this
+ * is a software ECC engine, or an hardware engine that is
+ * outside the NAND controller pipeline.
+ * - pipelined: The ECC engine is inside the NAND pipeline, ie. on the
+ * controller's side. This is the case of most of the raw NAND
+ * controllers. In the pipeline case, the ECC bytes are
+ * generated/data corrected on the fly when a page is
+ * written/read.
+ * - ondie: The ECC engine is inside the NAND pipeline, on the chip's side.
+ * Some NAND chips can correct themselves the data.
+ *
+ * Besides the initial setup and final cleanups, the interfaces are rather
+ * simple:
+ * - prepare: Prepare an I/O request. Enable/disable the ECC engine based on
+ * the I/O request type. In case of software correction or external
+ * engine, this step may involve to derive the ECC bytes and place
+ * them in the OOB area before a write.
+ * - finish: Finish an I/O request. Correct the data in case of a read
+ * request and report the number of corrected bits/uncorrectable
+ * errors. Most likely empty for write operations, unless you have
+ * hardware specific stuff to do, like shutting down the engine to
+ * save power.
+ *
+ * The I/O request should be enclosed in a prepare()/finish() pair of calls
+ * and will behave differently depending on the requested I/O type:
+ * - raw: Correction disabled
+ * - ecc: Correction enabled
+ *
+ * The request direction is impacting the logic as well:
+ * - read: Load data from the NAND chip
+ * - write: Store data in the NAND chip
+ *
+ * Mixing all this combinations together gives the following behavior.
+ * Those are just examples, drivers are free to add custom steps in their
+ * prepare/finish hook.
+ *
+ * [external ECC engine]
+ * - external + prepare + raw + read: do nothing
+ * - external + finish + raw + read: do nothing
+ * - external + prepare + raw + write: do nothing
+ * - external + finish + raw + write: do nothing
+ * - external + prepare + ecc + read: do nothing
+ * - external + finish + ecc + read: calculate expected ECC bytes, extract
+ * ECC bytes from OOB buffer, correct
+ * and report any bitflip/error
+ * - external + prepare + ecc + write: calculate ECC bytes and store them at
+ * the right place in the OOB buffer based
+ * on the OOB layout
+ * - external + finish + ecc + write: do nothing
+ *
+ * [pipelined ECC engine]
+ * - pipelined + prepare + raw + read: disable the controller's ECC engine if
+ * activated
+ * - pipelined + finish + raw + read: do nothing
+ * - pipelined + prepare + raw + write: disable the controller's ECC engine if
+ * activated
+ * - pipelined + finish + raw + write: do nothing
+ * - pipelined + prepare + ecc + read: enable the controller's ECC engine if
+ * deactivated
+ * - pipelined + finish + ecc + read: check the status, report any
+ * error/bitflip
+ * - pipelined + prepare + ecc + write: enable the controller's ECC engine if
+ * deactivated
+ * - pipelined + finish + ecc + write: do nothing
+ *
+ * [ondie ECC engine]
+ * - ondie + prepare + raw + read: send commands to disable the on-chip ECC
+ * engine if activated
+ * - ondie + finish + raw + read: do nothing
+ * - ondie + prepare + raw + write: send commands to disable the on-chip ECC
+ * engine if activated
+ * - ondie + finish + raw + write: do nothing
+ * - ondie + prepare + ecc + read: send commands to enable the on-chip ECC
+ * engine if deactivated
+ * - ondie + finish + ecc + read: send commands to check the status, report
+ * any error/bitflip
+ * - ondie + prepare + ecc + write: send commands to enable the on-chip ECC
+ * engine if deactivated
+ * - ondie + finish + ecc + write: do nothing
+ */
+
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+
+/**
+ * nand_ecc_init_ctx - Init the ECC engine context
+ * @nand: the NAND device
+ *
+ * On success, the caller is responsible of calling @nand_ecc_cleanup_ctx().
+ */
+int nand_ecc_init_ctx(struct nand_device *nand)
+{
+ if (!nand->ecc.engine->ops->init_ctx)
+ return 0;
+
+ return nand->ecc.engine->ops->init_ctx(nand);
+}
+EXPORT_SYMBOL(nand_ecc_init_ctx);
+
+/**
+ * nand_ecc_cleanup_ctx - Cleanup the ECC engine context
+ * @nand: the NAND device
+ */
+void nand_ecc_cleanup_ctx(struct nand_device *nand)
+{
+ if (nand->ecc.engine->ops->cleanup_ctx)
+ nand->ecc.engine->ops->cleanup_ctx(nand);
+}
+EXPORT_SYMBOL(nand_ecc_cleanup_ctx);
+
+/**
+ * nand_ecc_prepare_io_req - Prepare an I/O request
+ * @nand: the NAND device
+ * @req: the I/O request
+ */
+int nand_ecc_prepare_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req)
+{
+ if (!nand->ecc.engine->ops->prepare_io_req)
+ return 0;
+
+ return nand->ecc.engine->ops->prepare_io_req(nand, req);
+}
+EXPORT_SYMBOL(nand_ecc_prepare_io_req);
+
+/**
+ * nand_ecc_finish_io_req - Finish an I/O request
+ * @nand: the NAND device
+ * @req: the I/O request
+ */
+int nand_ecc_finish_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req)
+{
+ if (!nand->ecc.engine->ops->finish_io_req)
+ return 0;
+
+ return nand->ecc.engine->ops->finish_io_req(nand, req);
+}
+EXPORT_SYMBOL(nand_ecc_finish_io_req);
+
+/* Define default OOB placement schemes for large and small page devices */
+static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section > 1)
+ return -ERANGE;
+
+ if (!section) {
+ oobregion->offset = 0;
+ if (mtd->oobsize == 16)
+ oobregion->length = 4;
+ else
+ oobregion->length = 3;
+ } else {
+ if (mtd->oobsize == 8)
+ return -ERANGE;
+
+ oobregion->offset = 6;
+ oobregion->length = total_ecc_bytes - 4;
+ }
+
+ return 0;
+}
+
+static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ if (section > 1)
+ return -ERANGE;
+
+ if (mtd->oobsize == 16) {
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = 8;
+ oobregion->offset = 8;
+ } else {
+ oobregion->length = 2;
+ if (!section)
+ oobregion->offset = 3;
+ else
+ oobregion->offset = 6;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
+ .ecc = nand_ooblayout_ecc_sp,
+ .free = nand_ooblayout_free_sp,
+};
+
+const struct mtd_ooblayout_ops *nand_get_small_page_ooblayout(void)
+{
+ return &nand_ooblayout_sp_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_small_page_ooblayout);
+
+static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section || !total_ecc_bytes)
+ return -ERANGE;
+
+ oobregion->length = total_ecc_bytes;
+ oobregion->offset = mtd->oobsize - oobregion->length;
+
+ return 0;
+}
+
+static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section)
+ return -ERANGE;
+
+ oobregion->length = mtd->oobsize - total_ecc_bytes - 2;
+ oobregion->offset = 2;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
+ .ecc = nand_ooblayout_ecc_lp,
+ .free = nand_ooblayout_free_lp,
+};
+
+const struct mtd_ooblayout_ops *nand_get_large_page_ooblayout(void)
+{
+ return &nand_ooblayout_lp_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_large_page_ooblayout);
+
+/*
+ * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
+ * are placed at a fixed offset.
+ */
+static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+ if (section)
+ return -ERANGE;
+
+ switch (mtd->oobsize) {
+ case 64:
+ oobregion->offset = 40;
+ break;
+ case 128:
+ oobregion->offset = 80;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ oobregion->length = total_ecc_bytes;
+ if (oobregion->offset + oobregion->length > mtd->oobsize)
+ return -ERANGE;
+
+ return 0;
+}
+
+static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *oobregion)
+{
+ struct nand_device *nand = mtd_to_nanddev(mtd);
+ unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+ int ecc_offset = 0;
+
+ if (section < 0 || section > 1)
+ return -ERANGE;
+
+ switch (mtd->oobsize) {
+ case 64:
+ ecc_offset = 40;
+ break;
+ case 128:
+ ecc_offset = 80;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (section == 0) {
+ oobregion->offset = 2;
+ oobregion->length = ecc_offset - 2;
+ } else {
+ oobregion->offset = ecc_offset + total_ecc_bytes;
+ oobregion->length = mtd->oobsize - oobregion->offset;
+ }
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
+ .ecc = nand_ooblayout_ecc_lp_hamming,
+ .free = nand_ooblayout_free_lp_hamming,
+};
+
+const struct mtd_ooblayout_ops *nand_get_large_page_hamming_ooblayout(void)
+{
+ return &nand_ooblayout_lp_hamming_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_large_page_hamming_ooblayout);
+
+static enum nand_ecc_engine_type
+of_get_nand_ecc_engine_type(struct device_node *np)
+{
+ struct device_node *eng_np;
+
+ if (of_property_read_bool(np, "nand-no-ecc-engine"))
+ return NAND_ECC_ENGINE_TYPE_NONE;
+
+ if (of_property_read_bool(np, "nand-use-soft-ecc-engine"))
+ return NAND_ECC_ENGINE_TYPE_SOFT;
+
+ eng_np = of_parse_phandle(np, "nand-ecc-engine", 0);
+ of_node_put(eng_np);
+
+ if (eng_np) {
+ if (eng_np == np)
+ return NAND_ECC_ENGINE_TYPE_ON_DIE;
+ else
+ return NAND_ECC_ENGINE_TYPE_ON_HOST;
+ }
+
+ return NAND_ECC_ENGINE_TYPE_INVALID;
+}
+
+static const char * const nand_ecc_placement[] = {
+ [NAND_ECC_PLACEMENT_OOB] = "oob",
+ [NAND_ECC_PLACEMENT_INTERLEAVED] = "interleaved",
+};
+
+enum nand_ecc_placement of_get_nand_ecc_placement(struct device_node *np)
+{
+ enum nand_ecc_placement placement;
+ const char *pm;
+ int err;
+
+ err = of_property_read_string(np, "nand-ecc-placement", &pm);
+ if (!err) {
+ for (placement = NAND_ECC_PLACEMENT_OOB;
+ placement < ARRAY_SIZE(nand_ecc_placement); placement++) {
+ if (!strcasecmp(pm, nand_ecc_placement[placement]))
+ return placement;
+ }
+ }
+
+ return NAND_ECC_PLACEMENT_UNKNOWN;
+}
+
+static const char * const nand_ecc_algos[] = {
+ [NAND_ECC_ALGO_HAMMING] = "hamming",
+ [NAND_ECC_ALGO_BCH] = "bch",
+ [NAND_ECC_ALGO_RS] = "rs",
+};
+
+static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
+{
+ enum nand_ecc_algo ecc_algo;
+ const char *pm;
+ int err;
+
+ err = of_property_read_string(np, "nand-ecc-algo", &pm);
+ if (!err) {
+ for (ecc_algo = NAND_ECC_ALGO_HAMMING;
+ ecc_algo < ARRAY_SIZE(nand_ecc_algos);
+ ecc_algo++) {
+ if (!strcasecmp(pm, nand_ecc_algos[ecc_algo]))
+ return ecc_algo;
+ }
+ }
+
+ return NAND_ECC_ALGO_UNKNOWN;
+}
+
+static int of_get_nand_ecc_step_size(struct device_node *np)
+{
+ int ret;
+ u32 val;
+
+ ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
+ return ret ? ret : val;
+}
+
+static int of_get_nand_ecc_strength(struct device_node *np)
+{
+ int ret;
+ u32 val;
+
+ ret = of_property_read_u32(np, "nand-ecc-strength", &val);
+ return ret ? ret : val;
+}
+
+void of_get_nand_ecc_user_config(struct nand_device *nand)
+{
+ struct device_node *dn = nanddev_get_of_node(nand);
+ int strength, size;
+
+ nand->ecc.user_conf.engine_type = of_get_nand_ecc_engine_type(dn);
+ nand->ecc.user_conf.algo = of_get_nand_ecc_algo(dn);
+ nand->ecc.user_conf.placement = of_get_nand_ecc_placement(dn);
+
+ strength = of_get_nand_ecc_strength(dn);
+ if (strength >= 0)
+ nand->ecc.user_conf.strength = strength;
+
+ size = of_get_nand_ecc_step_size(dn);
+ if (size >= 0)
+ nand->ecc.user_conf.step_size = size;
+
+ if (of_property_read_bool(dn, "nand-ecc-maximize"))
+ nand->ecc.user_conf.flags |= NAND_ECC_MAXIMIZE_STRENGTH;
+}
+EXPORT_SYMBOL(of_get_nand_ecc_user_config);
+
+/**
+ * nand_ecc_is_strong_enough - Check if the chip configuration meets the
+ * datasheet requirements.
+ *
+ * @nand: Device to check
+ *
+ * If our configuration corrects A bits per B bytes and the minimum
+ * required correction level is X bits per Y bytes, then we must ensure
+ * both of the following are true:
+ *
+ * (1) A / B >= X / Y
+ * (2) A >= X
+ *
+ * Requirement (1) ensures we can correct for the required bitflip density.
+ * Requirement (2) ensures we can correct even when all bitflips are clumped
+ * in the same sector.
+ */
+bool nand_ecc_is_strong_enough(struct nand_device *nand)
+{
+ const struct nand_ecc_props *reqs = nanddev_get_ecc_requirements(nand);
+ const struct nand_ecc_props *conf = nanddev_get_ecc_conf(nand);
+ struct mtd_info *mtd = nanddev_to_mtd(nand);
+ int corr, ds_corr;
+
+ if (conf->step_size == 0 || reqs->step_size == 0)
+ /* Not enough information */
+ return true;
+
+ /*
+ * We get the number of corrected bits per page to compare
+ * the correction density.
+ */
+ corr = (mtd->writesize * conf->strength) / conf->step_size;
+ ds_corr = (mtd->writesize * reqs->strength) / reqs->step_size;
+
+ return corr >= ds_corr && conf->strength >= reqs->strength;
+}
+EXPORT_SYMBOL(nand_ecc_is_strong_enough);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("Generic ECC engine");
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index e754a6fc8a4b..8cf5bdbea782 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -127,6 +127,40 @@ struct nand_page_io_req {
int mode;
};
+const struct mtd_ooblayout_ops *nand_get_small_page_ooblayout(void);
+const struct mtd_ooblayout_ops *nand_get_large_page_ooblayout(void);
+const struct mtd_ooblayout_ops *nand_get_large_page_hamming_ooblayout(void);
+
+/**
+ * enum nand_ecc_engine_type - NAND ECC engine type
+ * @NAND_ECC_ENGINE_TYPE_INVALID: Invalid value
+ * @NAND_ECC_ENGINE_TYPE_NONE: No ECC correction
+ * @NAND_ECC_ENGINE_TYPE_SOFT: Software ECC correction
+ * @NAND_ECC_ENGINE_TYPE_ON_HOST: On host hardware ECC correction
+ * @NAND_ECC_ENGINE_TYPE_ON_DIE: On chip hardware ECC correction
+ */
+enum nand_ecc_engine_type {
+ NAND_ECC_ENGINE_TYPE_INVALID,
+ NAND_ECC_ENGINE_TYPE_NONE,
+ NAND_ECC_ENGINE_TYPE_SOFT,
+ NAND_ECC_ENGINE_TYPE_ON_HOST,
+ NAND_ECC_ENGINE_TYPE_ON_DIE,
+};
+
+/**
+ * enum nand_ecc_placement - NAND ECC bytes placement
+ * @NAND_ECC_PLACEMENT_UNKNOWN: The actual position of the ECC bytes is unknown
+ * @NAND_ECC_PLACEMENT_OOB: The ECC bytes are located in the OOB area
+ * @NAND_ECC_PLACEMENT_INTERLEAVED: Syndrome layout, there are ECC bytes
+ * interleaved with regular data in the main
+ * area
+ */
+enum nand_ecc_placement {
+ NAND_ECC_PLACEMENT_UNKNOWN,
+ NAND_ECC_PLACEMENT_OOB,
+ NAND_ECC_PLACEMENT_INTERLEAVED,
+};
+
/**
* enum nand_ecc_algo - NAND ECC algorithm
* @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
@@ -143,16 +177,27 @@ enum nand_ecc_algo {
/**
* struct nand_ecc_props - NAND ECC properties
+ * @engine_type: ECC engine type
+ * @placement: OOB placement (if relevant)
+ * @algo: ECC algorithm (if relevant)
* @strength: ECC strength
* @step_size: Number of bytes per step
+ * @flags: Misc properties
*/
struct nand_ecc_props {
+ enum nand_ecc_engine_type engine_type;
+ enum nand_ecc_placement placement;
+ enum nand_ecc_algo algo;
unsigned int strength;
unsigned int step_size;
+ unsigned int flags;
};
#define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) }
+/* NAND ECC misc flags */
+#define NAND_ECC_MAXIMIZE_STRENGTH BIT(0)
+
/**
* struct nand_bbt - bad block table object
* @cache: in memory BBT cache
@@ -183,6 +228,75 @@ struct nand_ops {
bool (*isbad)(struct nand_device *nand, const struct nand_pos *pos);
};
+/**
+ * struct nand_ecc_context - Context for the ECC engine
+ * @conf: basic ECC engine parameters
+ * @total: total number of bytes used for storing ECC codes, this is used by
+ * generic OOB layouts
+ * @priv: ECC engine driver private data
+ */
+struct nand_ecc_context {
+ struct nand_ecc_props conf;
+ unsigned int total;
+ void *priv;
+};
+
+/**
+ * struct nand_ecc_engine_ops - ECC engine operations
+ * @init_ctx: given a desired user configuration for the pointed NAND device,
+ * requests the ECC engine driver to setup a configuration with
+ * values it supports.
+ * @cleanup_ctx: clean the context initialized by @init_ctx.
+ * @prepare_io_req: is called before reading/writing a page to prepare the I/O
+ * request to be performed with ECC correction.
+ * @finish_io_req: is called after reading/writing a page to terminate the I/O
+ * request and ensure proper ECC correction.
+ */
+struct nand_ecc_engine_ops {
+ int (*init_ctx)(struct nand_device *nand);
+ void (*cleanup_ctx)(struct nand_device *nand);
+ int (*prepare_io_req)(struct nand_device *nand,
+ struct nand_page_io_req *req);
+ int (*finish_io_req)(struct nand_device *nand,
+ struct nand_page_io_req *req);
+};
+
+/**
+ * struct nand_ecc_engine - ECC engine abstraction for NAND devices
+ * @ops: ECC engine operations
+ */
+struct nand_ecc_engine {
+ struct nand_ecc_engine_ops *ops;
+};
+
+void of_get_nand_ecc_user_config(struct nand_device *nand);
+int nand_ecc_init_ctx(struct nand_device *nand);
+void nand_ecc_cleanup_ctx(struct nand_device *nand);
+int nand_ecc_prepare_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req);
+int nand_ecc_finish_io_req(struct nand_device *nand,
+ struct nand_page_io_req *req);
+bool nand_ecc_is_strong_enough(struct nand_device *nand);
+
+/**
+ * struct nand_ecc - Information relative to the ECC
+ * @defaults: Default values, depend on the underlying subsystem
+ * @requirements: ECC requirements from the NAND chip perspective
+ * @user_conf: User desires in terms of ECC parameters
+ * @ctx: ECC context for the ECC engine, derived from the device @requirements
+ * the @user_conf and the @defaults
+ * @ondie_engine: On-die ECC engine reference, if any
+ * @engine: ECC engine actually bound
+ */
+struct nand_ecc {
+ struct nand_ecc_props defaults;
+ struct nand_ecc_props requirements;
+ struct nand_ecc_props user_conf;
+ struct nand_ecc_context ctx;
+ struct nand_ecc_engine *ondie_engine;
+ struct nand_ecc_engine *engine;
+};
+
/**
* struct nand_device - NAND device
* @mtd: MTD instance attached to the NAND device
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 09/20] mtd: rawnand: Separate the ECC engine type and the ECC byte placement
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
The use of "syndrome" placement should not be encoded in the ECC
engine mode/type.
Create a "placement" field in NAND chip and change all occurrences of
the NAND_ECC_HW_SYNDROME enumeration to be just NAND_ECC_HW and
possibly a placement entry like NAND_ECC_PLACEMENT_INTERLEAVED.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
arch/arm/mach-davinci/board-dm355-leopard.c | 3 +-
drivers/mtd/nand/raw/cafe_nand.c | 3 +-
drivers/mtd/nand/raw/davinci_nand.c | 5 +-
drivers/mtd/nand/raw/denali.c | 3 +-
drivers/mtd/nand/raw/diskonchip.c | 3 +-
drivers/mtd/nand/raw/lpc32xx_slc.c | 3 +-
drivers/mtd/nand/raw/nand_base.c | 109 +++++++++++---------
drivers/mtd/nand/raw/r852.c | 3 +-
include/linux/mtd/rawnand.h | 6 +-
include/linux/platform_data/mtd-davinci.h | 1 +
10 files changed, 81 insertions(+), 58 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index b9e9950dd300..4c8a592754ac 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -76,7 +76,8 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .ecc_mode = NAND_HW_ECC_ENGINE,
+ .ecc_placement = NAND_ECC_PLACEMENT_INTERLEAVED,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
};
diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index 92173790f20b..2bf8ab542e38 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -629,7 +629,8 @@ static int cafe_nand_attach_chip(struct nand_chip *chip)
goto out_free_dma;
}
- cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+ cafe->nand.ecc.mode = NAND_ECC_HW;
+ cafe->nand.ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
cafe->nand.ecc.size = mtd->writesize;
cafe->nand.ecc.bytes = 14;
cafe->nand.ecc.strength = 4;
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 551515c223bb..3640c7e45e15 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -168,7 +168,7 @@ static int nand_davinci_correct_1bit(struct nand_chip *chip, u_char *dat,
/*
* 4-bit hardware ECC ... context maintained over entire AEMIF
*
- * This is a syndrome engine, but we avoid NAND_ECC_HW_SYNDROME
+ * This is a syndrome engine, but we avoid NAND_ECC_PLACEMENT_INTERLEAVED
* since that forces use of a problematic "infix OOB" layout.
* Among other things, it trashes manufacturer bad block markers.
* Also, and specific to this hardware, it ECC-protects the "prepad"
@@ -851,6 +851,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
/* Use board-specific ECC config */
info->chip.ecc.mode = pdata->ecc_mode;
+ info->chip.ecc.placement = pdata->ecc_placement;
spin_lock_irq(&davinci_nand_lock);
@@ -897,7 +898,7 @@ static int nand_davinci_remove(struct platform_device *pdev)
int ret;
spin_lock_irq(&davinci_nand_lock);
- if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
+ if (info->chip.ecc.placement == NAND_ECC_PLACEMENT_INTERLEAVED)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 4e6e1578aa2d..514a97ea4450 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1237,7 +1237,8 @@ int denali_chip_init(struct denali_controller *denali,
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
chip->options |= NAND_NO_SUBPAGE_WRITE;
- chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.read_page = denali_read_page;
chip->ecc.write_page = denali_write_page;
chip->ecc.read_page_raw = denali_read_page_raw;
diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c
index 43721863a0d8..40360352136b 100644
--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1456,7 +1456,8 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.calculate = doc200x_calculate_ecc;
nand->ecc.correct = doc200x_correct_data;
- nand->ecc.mode = NAND_ECC_HW_SYNDROME;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
nand->ecc.strength = 2;
diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index b151fd000815..ccb189c8e343 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -881,7 +881,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
/* NAND callbacks for LPC32xx SLC hardware */
- chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->legacy.read_byte = lpc32xx_nand_read_byte;
chip->legacy.read_buf = lpc32xx_nand_read_buf;
chip->legacy.write_buf = lpc32xx_nand_write_buf;
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 3c11525d5054..9de58c4c4443 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5767,61 +5767,74 @@ static int nand_scan_tail(struct nand_chip *chip)
switch (ecc->mode) {
case NAND_ECC_HW:
- /* Use standard hwecc read page function? */
- if (!ecc->read_page)
- ecc->read_page = nand_read_page_hwecc;
- if (!ecc->write_page)
- ecc->write_page = nand_write_page_hwecc;
- if (!ecc->read_page_raw)
- ecc->read_page_raw = nand_read_page_raw;
- if (!ecc->write_page_raw)
- ecc->write_page_raw = nand_write_page_raw;
- if (!ecc->read_oob)
- ecc->read_oob = nand_read_oob_std;
- if (!ecc->write_oob)
- ecc->write_oob = nand_write_oob_std;
- if (!ecc->read_subpage)
- ecc->read_subpage = nand_read_subpage;
- if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
- ecc->write_subpage = nand_write_subpage_hwecc;
- fallthrough;
- case NAND_ECC_HW_SYNDROME:
- if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
- (!ecc->read_page ||
- ecc->read_page == nand_read_page_hwecc ||
- !ecc->write_page ||
- ecc->write_page == nand_write_page_hwecc)) {
- WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
- ret = -EINVAL;
- goto err_nand_manuf_cleanup;
- }
- /* Use standard syndrome read/write page function? */
- if (!ecc->read_page)
- ecc->read_page = nand_read_page_syndrome;
- if (!ecc->write_page)
- ecc->write_page = nand_write_page_syndrome;
- if (!ecc->read_page_raw)
- ecc->read_page_raw = nand_read_page_raw_syndrome;
- if (!ecc->write_page_raw)
- ecc->write_page_raw = nand_write_page_raw_syndrome;
- if (!ecc->read_oob)
- ecc->read_oob = nand_read_oob_syndrome;
- if (!ecc->write_oob)
- ecc->write_oob = nand_write_oob_syndrome;
+ switch (ecc->placement) {
+ case NAND_ECC_PLACEMENT_UNKNOWN:
+ case NAND_ECC_PLACEMENT_OOB:
+ /* Use standard hwecc read page function? */
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_hwecc;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_hwecc;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_std;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->read_subpage)
+ ecc->read_subpage = nand_read_subpage;
+ if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
+ ecc->write_subpage = nand_write_subpage_hwecc;
+ fallthrough;
- if (mtd->writesize >= ecc->size) {
- if (!ecc->strength) {
- WARN(1, "Driver must set ecc.strength when using hardware ECC\n");
+ case NAND_ECC_PLACEMENT_INTERLEAVED:
+ if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
+ (!ecc->read_page ||
+ ecc->read_page == nand_read_page_hwecc ||
+ !ecc->write_page ||
+ ecc->write_page == nand_write_page_hwecc)) {
+ WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
ret = -EINVAL;
goto err_nand_manuf_cleanup;
}
+ /* Use standard syndrome read/write page function? */
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_syndrome;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_syndrome;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw_syndrome;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw_syndrome;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_syndrome;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_syndrome;
+
+ if (mtd->writesize >= ecc->size) {
+ if (!ecc->strength) {
+ WARN(1, "Driver must set ecc.strength when using hardware ECC\n");
+ ret = -EINVAL;
+ goto err_nand_manuf_cleanup;
+ }
+ break;
+ }
+ pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
+ ecc->size, mtd->writesize);
+ ecc->mode = NAND_ECC_SOFT;
+ ecc->algo = NAND_ECC_ALGO_HAMMING;
break;
+
+ default:
+ pr_warn("Invalid NAND_ECC_PLACEMENT %d\n",
+ ecc->placement);
+ ret = -EINVAL;
+ goto err_nand_manuf_cleanup;
}
- pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
- ecc->size, mtd->writesize);
- ecc->mode = NAND_ECC_SOFT;
- ecc->algo = NAND_ECC_ALGO_HAMMING;
fallthrough;
+
case NAND_ECC_SOFT:
ret = nand_set_ecc_soft_ops(chip);
if (ret) {
diff --git a/drivers/mtd/nand/raw/r852.c b/drivers/mtd/nand/raw/r852.c
index f865e3a47b01..f0988cda4479 100644
--- a/drivers/mtd/nand/raw/r852.c
+++ b/drivers/mtd/nand/raw/r852.c
@@ -859,7 +859,8 @@ static int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
chip->legacy.write_buf = r852_write_buf;
/* ecc */
- chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.size = R852_DMA_LEN;
chip->ecc.bytes = SM_OOB_SIZE;
chip->ecc.strength = 2;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index ce37569c3f57..63aa061427bb 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -304,6 +304,7 @@ static const struct nand_ecc_caps __name = { \
/**
* struct nand_ecc_ctrl - Control structure for ECC
* @mode: ECC mode
+ * @placement: OOB bytes placement
* @algo: ECC algorithm
* @steps: number of ECC steps per page
* @size: data bytes per ECC step
@@ -331,7 +332,7 @@ static const struct nand_ecc_caps __name = { \
* controller and always return contiguous in-band and
* out-of-band data even if they're not stored
* contiguously on the NAND chip (e.g.
- * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * NAND_ECC_PLACEMENT_INTERLEAVED interleaves in-band and
* out-of-band data).
* @write_page_raw: function to write a raw page without ECC. This function
* should hide the specific layout used by the ECC
@@ -339,7 +340,7 @@ static const struct nand_ecc_caps __name = { \
* in-band and out-of-band data. ECC controller is
* responsible for doing the appropriate transformations
* to adapt to its specific layout (e.g.
- * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * NAND_ECC_PLACEMENT_INTERLEAVED interleaves in-band and
* out-of-band data).
* @read_page: function to read a page according to the ECC generator
* requirements; returns maximum number of bitflips corrected in
@@ -356,6 +357,7 @@ static const struct nand_ecc_caps __name = { \
*/
struct nand_ecc_ctrl {
enum nand_ecc_mode mode;
+ enum nand_ecc_placement placement;
enum nand_ecc_algo algo;
int steps;
int size;
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h
index 03e92c71b3fa..6e2b252a4ce6 100644
--- a/include/linux/platform_data/mtd-davinci.h
+++ b/include/linux/platform_data/mtd-davinci.h
@@ -69,6 +69,7 @@ struct davinci_nand_pdata { /* platform_data */
* using it with large page chips.
*/
enum nand_ecc_mode ecc_mode;
+ enum nand_ecc_placement ecc_placement;
u8 ecc_bits;
/* e.g. NAND_BUSWIDTH_16 */
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 09/20] mtd: rawnand: Separate the ECC engine type and the ECC byte placement
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
The use of "syndrome" placement should not be encoded in the ECC
engine mode/type.
Create a "placement" field in NAND chip and change all occurrences of
the NAND_ECC_HW_SYNDROME enumeration to be just NAND_ECC_HW and
possibly a placement entry like NAND_ECC_PLACEMENT_INTERLEAVED.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
arch/arm/mach-davinci/board-dm355-leopard.c | 3 +-
drivers/mtd/nand/raw/cafe_nand.c | 3 +-
drivers/mtd/nand/raw/davinci_nand.c | 5 +-
drivers/mtd/nand/raw/denali.c | 3 +-
drivers/mtd/nand/raw/diskonchip.c | 3 +-
drivers/mtd/nand/raw/lpc32xx_slc.c | 3 +-
drivers/mtd/nand/raw/nand_base.c | 109 +++++++++++---------
drivers/mtd/nand/raw/r852.c | 3 +-
include/linux/mtd/rawnand.h | 6 +-
include/linux/platform_data/mtd-davinci.h | 1 +
10 files changed, 81 insertions(+), 58 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index b9e9950dd300..4c8a592754ac 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -76,7 +76,8 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .ecc_mode = NAND_HW_ECC_ENGINE,
+ .ecc_placement = NAND_ECC_PLACEMENT_INTERLEAVED,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
};
diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index 92173790f20b..2bf8ab542e38 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -629,7 +629,8 @@ static int cafe_nand_attach_chip(struct nand_chip *chip)
goto out_free_dma;
}
- cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+ cafe->nand.ecc.mode = NAND_ECC_HW;
+ cafe->nand.ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
cafe->nand.ecc.size = mtd->writesize;
cafe->nand.ecc.bytes = 14;
cafe->nand.ecc.strength = 4;
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 551515c223bb..3640c7e45e15 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -168,7 +168,7 @@ static int nand_davinci_correct_1bit(struct nand_chip *chip, u_char *dat,
/*
* 4-bit hardware ECC ... context maintained over entire AEMIF
*
- * This is a syndrome engine, but we avoid NAND_ECC_HW_SYNDROME
+ * This is a syndrome engine, but we avoid NAND_ECC_PLACEMENT_INTERLEAVED
* since that forces use of a problematic "infix OOB" layout.
* Among other things, it trashes manufacturer bad block markers.
* Also, and specific to this hardware, it ECC-protects the "prepad"
@@ -851,6 +851,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
/* Use board-specific ECC config */
info->chip.ecc.mode = pdata->ecc_mode;
+ info->chip.ecc.placement = pdata->ecc_placement;
spin_lock_irq(&davinci_nand_lock);
@@ -897,7 +898,7 @@ static int nand_davinci_remove(struct platform_device *pdev)
int ret;
spin_lock_irq(&davinci_nand_lock);
- if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
+ if (info->chip.ecc.placement == NAND_ECC_PLACEMENT_INTERLEAVED)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 4e6e1578aa2d..514a97ea4450 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1237,7 +1237,8 @@ int denali_chip_init(struct denali_controller *denali,
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
chip->options |= NAND_NO_SUBPAGE_WRITE;
- chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.read_page = denali_read_page;
chip->ecc.write_page = denali_write_page;
chip->ecc.read_page_raw = denali_read_page_raw;
diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c
index 43721863a0d8..40360352136b 100644
--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1456,7 +1456,8 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.calculate = doc200x_calculate_ecc;
nand->ecc.correct = doc200x_correct_data;
- nand->ecc.mode = NAND_ECC_HW_SYNDROME;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
nand->ecc.strength = 2;
diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index b151fd000815..ccb189c8e343 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -881,7 +881,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
/* NAND callbacks for LPC32xx SLC hardware */
- chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->legacy.read_byte = lpc32xx_nand_read_byte;
chip->legacy.read_buf = lpc32xx_nand_read_buf;
chip->legacy.write_buf = lpc32xx_nand_write_buf;
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 3c11525d5054..9de58c4c4443 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5767,61 +5767,74 @@ static int nand_scan_tail(struct nand_chip *chip)
switch (ecc->mode) {
case NAND_ECC_HW:
- /* Use standard hwecc read page function? */
- if (!ecc->read_page)
- ecc->read_page = nand_read_page_hwecc;
- if (!ecc->write_page)
- ecc->write_page = nand_write_page_hwecc;
- if (!ecc->read_page_raw)
- ecc->read_page_raw = nand_read_page_raw;
- if (!ecc->write_page_raw)
- ecc->write_page_raw = nand_write_page_raw;
- if (!ecc->read_oob)
- ecc->read_oob = nand_read_oob_std;
- if (!ecc->write_oob)
- ecc->write_oob = nand_write_oob_std;
- if (!ecc->read_subpage)
- ecc->read_subpage = nand_read_subpage;
- if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
- ecc->write_subpage = nand_write_subpage_hwecc;
- fallthrough;
- case NAND_ECC_HW_SYNDROME:
- if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
- (!ecc->read_page ||
- ecc->read_page == nand_read_page_hwecc ||
- !ecc->write_page ||
- ecc->write_page == nand_write_page_hwecc)) {
- WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
- ret = -EINVAL;
- goto err_nand_manuf_cleanup;
- }
- /* Use standard syndrome read/write page function? */
- if (!ecc->read_page)
- ecc->read_page = nand_read_page_syndrome;
- if (!ecc->write_page)
- ecc->write_page = nand_write_page_syndrome;
- if (!ecc->read_page_raw)
- ecc->read_page_raw = nand_read_page_raw_syndrome;
- if (!ecc->write_page_raw)
- ecc->write_page_raw = nand_write_page_raw_syndrome;
- if (!ecc->read_oob)
- ecc->read_oob = nand_read_oob_syndrome;
- if (!ecc->write_oob)
- ecc->write_oob = nand_write_oob_syndrome;
+ switch (ecc->placement) {
+ case NAND_ECC_PLACEMENT_UNKNOWN:
+ case NAND_ECC_PLACEMENT_OOB:
+ /* Use standard hwecc read page function? */
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_hwecc;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_hwecc;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_std;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->read_subpage)
+ ecc->read_subpage = nand_read_subpage;
+ if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
+ ecc->write_subpage = nand_write_subpage_hwecc;
+ fallthrough;
- if (mtd->writesize >= ecc->size) {
- if (!ecc->strength) {
- WARN(1, "Driver must set ecc.strength when using hardware ECC\n");
+ case NAND_ECC_PLACEMENT_INTERLEAVED:
+ if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
+ (!ecc->read_page ||
+ ecc->read_page == nand_read_page_hwecc ||
+ !ecc->write_page ||
+ ecc->write_page == nand_write_page_hwecc)) {
+ WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
ret = -EINVAL;
goto err_nand_manuf_cleanup;
}
+ /* Use standard syndrome read/write page function? */
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_syndrome;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_syndrome;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw_syndrome;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw_syndrome;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_syndrome;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_syndrome;
+
+ if (mtd->writesize >= ecc->size) {
+ if (!ecc->strength) {
+ WARN(1, "Driver must set ecc.strength when using hardware ECC\n");
+ ret = -EINVAL;
+ goto err_nand_manuf_cleanup;
+ }
+ break;
+ }
+ pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
+ ecc->size, mtd->writesize);
+ ecc->mode = NAND_ECC_SOFT;
+ ecc->algo = NAND_ECC_ALGO_HAMMING;
break;
+
+ default:
+ pr_warn("Invalid NAND_ECC_PLACEMENT %d\n",
+ ecc->placement);
+ ret = -EINVAL;
+ goto err_nand_manuf_cleanup;
}
- pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
- ecc->size, mtd->writesize);
- ecc->mode = NAND_ECC_SOFT;
- ecc->algo = NAND_ECC_ALGO_HAMMING;
fallthrough;
+
case NAND_ECC_SOFT:
ret = nand_set_ecc_soft_ops(chip);
if (ret) {
diff --git a/drivers/mtd/nand/raw/r852.c b/drivers/mtd/nand/raw/r852.c
index f865e3a47b01..f0988cda4479 100644
--- a/drivers/mtd/nand/raw/r852.c
+++ b/drivers/mtd/nand/raw/r852.c
@@ -859,7 +859,8 @@ static int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
chip->legacy.write_buf = r852_write_buf;
/* ecc */
- chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.size = R852_DMA_LEN;
chip->ecc.bytes = SM_OOB_SIZE;
chip->ecc.strength = 2;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index ce37569c3f57..63aa061427bb 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -304,6 +304,7 @@ static const struct nand_ecc_caps __name = { \
/**
* struct nand_ecc_ctrl - Control structure for ECC
* @mode: ECC mode
+ * @placement: OOB bytes placement
* @algo: ECC algorithm
* @steps: number of ECC steps per page
* @size: data bytes per ECC step
@@ -331,7 +332,7 @@ static const struct nand_ecc_caps __name = { \
* controller and always return contiguous in-band and
* out-of-band data even if they're not stored
* contiguously on the NAND chip (e.g.
- * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * NAND_ECC_PLACEMENT_INTERLEAVED interleaves in-band and
* out-of-band data).
* @write_page_raw: function to write a raw page without ECC. This function
* should hide the specific layout used by the ECC
@@ -339,7 +340,7 @@ static const struct nand_ecc_caps __name = { \
* in-band and out-of-band data. ECC controller is
* responsible for doing the appropriate transformations
* to adapt to its specific layout (e.g.
- * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * NAND_ECC_PLACEMENT_INTERLEAVED interleaves in-band and
* out-of-band data).
* @read_page: function to read a page according to the ECC generator
* requirements; returns maximum number of bitflips corrected in
@@ -356,6 +357,7 @@ static const struct nand_ecc_caps __name = { \
*/
struct nand_ecc_ctrl {
enum nand_ecc_mode mode;
+ enum nand_ecc_placement placement;
enum nand_ecc_algo algo;
int steps;
int size;
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h
index 03e92c71b3fa..6e2b252a4ce6 100644
--- a/include/linux/platform_data/mtd-davinci.h
+++ b/include/linux/platform_data/mtd-davinci.h
@@ -69,6 +69,7 @@ struct davinci_nand_pdata { /* platform_data */
* using it with large page chips.
*/
enum nand_ecc_mode ecc_mode;
+ enum nand_ecc_placement ecc_placement;
u8 ecc_bits;
/* e.g. NAND_BUSWIDTH_16 */
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 09/20] mtd: rawnand: Separate the ECC engine type and the ECC byte placement
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
The use of "syndrome" placement should not be encoded in the ECC
engine mode/type.
Create a "placement" field in NAND chip and change all occurrences of
the NAND_ECC_HW_SYNDROME enumeration to be just NAND_ECC_HW and
possibly a placement entry like NAND_ECC_PLACEMENT_INTERLEAVED.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
arch/arm/mach-davinci/board-dm355-leopard.c | 3 +-
drivers/mtd/nand/raw/cafe_nand.c | 3 +-
drivers/mtd/nand/raw/davinci_nand.c | 5 +-
drivers/mtd/nand/raw/denali.c | 3 +-
drivers/mtd/nand/raw/diskonchip.c | 3 +-
drivers/mtd/nand/raw/lpc32xx_slc.c | 3 +-
drivers/mtd/nand/raw/nand_base.c | 109 +++++++++++---------
drivers/mtd/nand/raw/r852.c | 3 +-
include/linux/mtd/rawnand.h | 6 +-
include/linux/platform_data/mtd-davinci.h | 1 +
10 files changed, 81 insertions(+), 58 deletions(-)
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index b9e9950dd300..4c8a592754ac 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -76,7 +76,8 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .ecc_mode = NAND_HW_ECC_ENGINE,
+ .ecc_placement = NAND_ECC_PLACEMENT_INTERLEAVED,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
};
diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index 92173790f20b..2bf8ab542e38 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -629,7 +629,8 @@ static int cafe_nand_attach_chip(struct nand_chip *chip)
goto out_free_dma;
}
- cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+ cafe->nand.ecc.mode = NAND_ECC_HW;
+ cafe->nand.ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
cafe->nand.ecc.size = mtd->writesize;
cafe->nand.ecc.bytes = 14;
cafe->nand.ecc.strength = 4;
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 551515c223bb..3640c7e45e15 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -168,7 +168,7 @@ static int nand_davinci_correct_1bit(struct nand_chip *chip, u_char *dat,
/*
* 4-bit hardware ECC ... context maintained over entire AEMIF
*
- * This is a syndrome engine, but we avoid NAND_ECC_HW_SYNDROME
+ * This is a syndrome engine, but we avoid NAND_ECC_PLACEMENT_INTERLEAVED
* since that forces use of a problematic "infix OOB" layout.
* Among other things, it trashes manufacturer bad block markers.
* Also, and specific to this hardware, it ECC-protects the "prepad"
@@ -851,6 +851,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
/* Use board-specific ECC config */
info->chip.ecc.mode = pdata->ecc_mode;
+ info->chip.ecc.placement = pdata->ecc_placement;
spin_lock_irq(&davinci_nand_lock);
@@ -897,7 +898,7 @@ static int nand_davinci_remove(struct platform_device *pdev)
int ret;
spin_lock_irq(&davinci_nand_lock);
- if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
+ if (info->chip.ecc.placement == NAND_ECC_PLACEMENT_INTERLEAVED)
ecc4_busy = false;
spin_unlock_irq(&davinci_nand_lock);
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 4e6e1578aa2d..514a97ea4450 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1237,7 +1237,8 @@ int denali_chip_init(struct denali_controller *denali,
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
chip->options |= NAND_NO_SUBPAGE_WRITE;
- chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.read_page = denali_read_page;
chip->ecc.write_page = denali_write_page;
chip->ecc.read_page_raw = denali_read_page_raw;
diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c
index 43721863a0d8..40360352136b 100644
--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1456,7 +1456,8 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.calculate = doc200x_calculate_ecc;
nand->ecc.correct = doc200x_correct_data;
- nand->ecc.mode = NAND_ECC_HW_SYNDROME;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
nand->ecc.strength = 2;
diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index b151fd000815..ccb189c8e343 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -881,7 +881,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
/* NAND callbacks for LPC32xx SLC hardware */
- chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->legacy.read_byte = lpc32xx_nand_read_byte;
chip->legacy.read_buf = lpc32xx_nand_read_buf;
chip->legacy.write_buf = lpc32xx_nand_write_buf;
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 3c11525d5054..9de58c4c4443 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5767,61 +5767,74 @@ static int nand_scan_tail(struct nand_chip *chip)
switch (ecc->mode) {
case NAND_ECC_HW:
- /* Use standard hwecc read page function? */
- if (!ecc->read_page)
- ecc->read_page = nand_read_page_hwecc;
- if (!ecc->write_page)
- ecc->write_page = nand_write_page_hwecc;
- if (!ecc->read_page_raw)
- ecc->read_page_raw = nand_read_page_raw;
- if (!ecc->write_page_raw)
- ecc->write_page_raw = nand_write_page_raw;
- if (!ecc->read_oob)
- ecc->read_oob = nand_read_oob_std;
- if (!ecc->write_oob)
- ecc->write_oob = nand_write_oob_std;
- if (!ecc->read_subpage)
- ecc->read_subpage = nand_read_subpage;
- if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
- ecc->write_subpage = nand_write_subpage_hwecc;
- fallthrough;
- case NAND_ECC_HW_SYNDROME:
- if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
- (!ecc->read_page ||
- ecc->read_page == nand_read_page_hwecc ||
- !ecc->write_page ||
- ecc->write_page == nand_write_page_hwecc)) {
- WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
- ret = -EINVAL;
- goto err_nand_manuf_cleanup;
- }
- /* Use standard syndrome read/write page function? */
- if (!ecc->read_page)
- ecc->read_page = nand_read_page_syndrome;
- if (!ecc->write_page)
- ecc->write_page = nand_write_page_syndrome;
- if (!ecc->read_page_raw)
- ecc->read_page_raw = nand_read_page_raw_syndrome;
- if (!ecc->write_page_raw)
- ecc->write_page_raw = nand_write_page_raw_syndrome;
- if (!ecc->read_oob)
- ecc->read_oob = nand_read_oob_syndrome;
- if (!ecc->write_oob)
- ecc->write_oob = nand_write_oob_syndrome;
+ switch (ecc->placement) {
+ case NAND_ECC_PLACEMENT_UNKNOWN:
+ case NAND_ECC_PLACEMENT_OOB:
+ /* Use standard hwecc read page function? */
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_hwecc;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_hwecc;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_std;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->read_subpage)
+ ecc->read_subpage = nand_read_subpage;
+ if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
+ ecc->write_subpage = nand_write_subpage_hwecc;
+ fallthrough;
- if (mtd->writesize >= ecc->size) {
- if (!ecc->strength) {
- WARN(1, "Driver must set ecc.strength when using hardware ECC\n");
+ case NAND_ECC_PLACEMENT_INTERLEAVED:
+ if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
+ (!ecc->read_page ||
+ ecc->read_page == nand_read_page_hwecc ||
+ !ecc->write_page ||
+ ecc->write_page == nand_write_page_hwecc)) {
+ WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
ret = -EINVAL;
goto err_nand_manuf_cleanup;
}
+ /* Use standard syndrome read/write page function? */
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_syndrome;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_syndrome;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw_syndrome;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw_syndrome;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_syndrome;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_syndrome;
+
+ if (mtd->writesize >= ecc->size) {
+ if (!ecc->strength) {
+ WARN(1, "Driver must set ecc.strength when using hardware ECC\n");
+ ret = -EINVAL;
+ goto err_nand_manuf_cleanup;
+ }
+ break;
+ }
+ pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
+ ecc->size, mtd->writesize);
+ ecc->mode = NAND_ECC_SOFT;
+ ecc->algo = NAND_ECC_ALGO_HAMMING;
break;
+
+ default:
+ pr_warn("Invalid NAND_ECC_PLACEMENT %d\n",
+ ecc->placement);
+ ret = -EINVAL;
+ goto err_nand_manuf_cleanup;
}
- pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
- ecc->size, mtd->writesize);
- ecc->mode = NAND_ECC_SOFT;
- ecc->algo = NAND_ECC_ALGO_HAMMING;
fallthrough;
+
case NAND_ECC_SOFT:
ret = nand_set_ecc_soft_ops(chip);
if (ret) {
diff --git a/drivers/mtd/nand/raw/r852.c b/drivers/mtd/nand/raw/r852.c
index f865e3a47b01..f0988cda4479 100644
--- a/drivers/mtd/nand/raw/r852.c
+++ b/drivers/mtd/nand/raw/r852.c
@@ -859,7 +859,8 @@ static int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
chip->legacy.write_buf = r852_write_buf;
/* ecc */
- chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.size = R852_DMA_LEN;
chip->ecc.bytes = SM_OOB_SIZE;
chip->ecc.strength = 2;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index ce37569c3f57..63aa061427bb 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -304,6 +304,7 @@ static const struct nand_ecc_caps __name = { \
/**
* struct nand_ecc_ctrl - Control structure for ECC
* @mode: ECC mode
+ * @placement: OOB bytes placement
* @algo: ECC algorithm
* @steps: number of ECC steps per page
* @size: data bytes per ECC step
@@ -331,7 +332,7 @@ static const struct nand_ecc_caps __name = { \
* controller and always return contiguous in-band and
* out-of-band data even if they're not stored
* contiguously on the NAND chip (e.g.
- * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * NAND_ECC_PLACEMENT_INTERLEAVED interleaves in-band and
* out-of-band data).
* @write_page_raw: function to write a raw page without ECC. This function
* should hide the specific layout used by the ECC
@@ -339,7 +340,7 @@ static const struct nand_ecc_caps __name = { \
* in-band and out-of-band data. ECC controller is
* responsible for doing the appropriate transformations
* to adapt to its specific layout (e.g.
- * NAND_ECC_HW_SYNDROME interleaves in-band and
+ * NAND_ECC_PLACEMENT_INTERLEAVED interleaves in-band and
* out-of-band data).
* @read_page: function to read a page according to the ECC generator
* requirements; returns maximum number of bitflips corrected in
@@ -356,6 +357,7 @@ static const struct nand_ecc_caps __name = { \
*/
struct nand_ecc_ctrl {
enum nand_ecc_mode mode;
+ enum nand_ecc_placement placement;
enum nand_ecc_algo algo;
int steps;
int size;
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h
index 03e92c71b3fa..6e2b252a4ce6 100644
--- a/include/linux/platform_data/mtd-davinci.h
+++ b/include/linux/platform_data/mtd-davinci.h
@@ -69,6 +69,7 @@ struct davinci_nand_pdata { /* platform_data */
* using it with large page chips.
*/
enum nand_ecc_mode ecc_mode;
+ enum nand_ecc_placement ecc_placement;
u8 ecc_bits;
/* e.g. NAND_BUSWIDTH_16 */
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 10/20] mtd: rawnand: Use the new ECC engine type enumeration
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Mechanical switch from the legacy "mode" enumeration to the new
"engine type" enumeration in drivers and board files.
The device tree parsing is also updated to return the new enumeration
from the old strings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
arch/arm/mach-davinci/board-da830-evm.c | 2 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-leopard.c | 2 +-
arch/arm/mach-davinci/board-dm365-evm.c | 2 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 2 +-
arch/arm/mach-davinci/board-mityomapl138.c | 2 +-
arch/arm/mach-davinci/board-neuros-osd2.c | 2 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +-
arch/arm/mach-s3c24xx/common-smdk.c | 2 +-
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-bast.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-qt2410.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 2 +-
arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
arch/arm/mach-s3c64xx/mach-hmt.c | 2 +-
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 +-
arch/arm/mach-s3c64xx/mach-real6410.c | 2 +-
drivers/mtd/nand/raw/ams-delta.c | 2 +-
drivers/mtd/nand/raw/arasan-nand-controller.c | 12 +--
drivers/mtd/nand/raw/atmel/nand-controller.c | 14 ++--
drivers/mtd/nand/raw/au1550nd.c | 2 +-
.../mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c | 3 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 +-
.../mtd/nand/raw/cadence-nand-controller.c | 4 +-
drivers/mtd/nand/raw/cafe_nand.c | 2 +-
drivers/mtd/nand/raw/cs553x_nand.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 24 +++---
drivers/mtd/nand/raw/denali.c | 2 +-
drivers/mtd/nand/raw/diskonchip.c | 2 +-
drivers/mtd/nand/raw/fsl_elbc_nand.c | 18 ++---
drivers/mtd/nand/raw/fsl_ifc_nand.c | 10 +--
drivers/mtd/nand/raw/fsl_upm.c | 2 +-
drivers/mtd/nand/raw/fsmc_nand.c | 12 +--
drivers/mtd/nand/raw/gpio.c | 2 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/nand/raw/hisi504_nand.c | 6 +-
.../mtd/nand/raw/ingenic/ingenic_nand_drv.c | 14 ++--
drivers/mtd/nand/raw/lpc32xx_mlc.c | 2 +-
drivers/mtd/nand/raw/lpc32xx_slc.c | 2 +-
drivers/mtd/nand/raw/marvell_nand.c | 17 ++--
drivers/mtd/nand/raw/meson_nand.c | 2 +-
drivers/mtd/nand/raw/mpc5121_nfc.c | 2 +-
drivers/mtd/nand/raw/mtk_nand.c | 6 +-
drivers/mtd/nand/raw/mxc_nand.c | 23 +++---
drivers/mtd/nand/raw/nand_base.c | 78 ++++++++++++-------
drivers/mtd/nand/raw/nand_micron.c | 4 +-
drivers/mtd/nand/raw/nand_toshiba.c | 3 +-
drivers/mtd/nand/raw/nandsim.c | 4 +-
drivers/mtd/nand/raw/ndfc.c | 2 +-
drivers/mtd/nand/raw/omap2.c | 20 ++---
drivers/mtd/nand/raw/orion_nand.c | 2 +-
drivers/mtd/nand/raw/pasemi_nand.c | 2 +-
drivers/mtd/nand/raw/plat_nand.c | 2 +-
drivers/mtd/nand/raw/qcom_nandc.c | 2 +-
drivers/mtd/nand/raw/r852.c | 2 +-
drivers/mtd/nand/raw/s3c2410.c | 18 ++---
drivers/mtd/nand/raw/sh_flctl.c | 4 +-
drivers/mtd/nand/raw/sharpsl.c | 2 +-
drivers/mtd/nand/raw/socrates_nand.c | 3 +-
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 9 ++-
drivers/mtd/nand/raw/sunxi_nand.c | 18 ++---
drivers/mtd/nand/raw/tango_nand.c | 2 +-
drivers/mtd/nand/raw/tegra_nand.c | 2 +-
drivers/mtd/nand/raw/tmio_nand.c | 2 +-
drivers/mtd/nand/raw/txx9ndfmc.c | 2 +-
drivers/mtd/nand/raw/vf610_nfc.c | 4 +-
drivers/mtd/nand/raw/xway_nand.c | 2 +-
include/linux/mtd/rawnand.h | 4 +-
include/linux/platform_data/mtd-davinci.h | 8 +-
.../linux/platform_data/mtd-nand-s3c2410.h | 2 +-
78 files changed, 238 insertions(+), 212 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index a273ab25c668..3b16a31da8b7 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -306,7 +306,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
.core_chipsel = 1,
.parts = da830_evm_nand_partitions,
.nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.bbt_td = &da830_evm_nand_bbt_main_descr,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 5b3549f1236c..6b96065c015a 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -239,7 +239,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = {
.core_chipsel = 1,
.parts = da850_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &da850_evm_nandflash_timing,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 5113273fda69..3c5a9e3c128a 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -82,7 +82,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 4c8a592754ac..e475b2113e70 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -76,7 +76,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_HW_ECC_ENGINE,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_placement = NAND_ECC_PLACEMENT_INTERLEAVED,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 2328b15ac067..bdf31eb77620 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -146,7 +146,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 3461d12bbfc0..457ed8dd57d8 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -162,7 +162,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
.core_chipsel = 0,
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 4600b617f9b4..0d55661e7a1f 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -91,7 +91,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_ale = 0x40000,
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.options = 0,
};
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index dfce421c0579..0c156fd18465 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -432,7 +432,7 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = {
.core_chipsel = 1,
.parts = mityomapl138_nandflash_partition,
.nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
.ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index ce99f782811a..cb1ff8edc73d 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -90,7 +90,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
.core_chipsel = 0,
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
};
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 5390a8630cf0..2c45ae392485 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -206,7 +206,7 @@ static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
.core_chipsel = 1,
.parts = omapl138_hawk_nandflash_partition,
.nr_parts = ARRAY_SIZE(omapl138_hawk_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 58e30cad386c..f845bd5ede54 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -166,7 +166,7 @@ static struct s3c2410_platform_nand smdk_nand_info = {
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(smdk_nand_sets),
.sets = smdk_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* devices we initialise */
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 072966dcad78..28326241e360 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -218,7 +218,7 @@ static struct s3c2410_platform_nand __initdata anubis_nand_info = {
.nr_sets = ARRAY_SIZE(anubis_nand_sets),
.sets = anubis_nand_sets,
.select_chip = anubis_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* IDE channels */
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 58c5ef3cf1d7..04dedebdb57c 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -109,7 +109,7 @@ static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
.sets = at2440evb_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* DM9000AEP 10/100 ethernet controller */
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index a7c3955ae8f6..6465eab0ab3a 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -294,7 +294,7 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = {
.nr_sets = ARRAY_SIZE(bast_nand_sets),
.sets = bast_nand_sets,
.select_chip = bast_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* DM9000 */
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 594901f3b8e5..db1b64f6e0a5 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -416,7 +416,7 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(gta02_nand_sets),
.sets = gta02_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 885e8f12e4b9..8233dcff19e7 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -228,7 +228,7 @@ static struct s3c2410_platform_nand __initdata jive_nand_info = {
.twrph1 = 40,
.sets = jive_nand_sets,
.nr_sets = ARRAY_SIZE(jive_nand_sets),
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static int __init jive_mtdset(char *options)
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 9035f868fb34..bd7c3ff675e3 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -296,7 +296,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
.nr_sets = ARRAY_SIZE(mini2440_nand_sets),
.sets = mini2440_nand_sets,
.ignore_unset_ecc = 1,
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
};
/* DM9000AEP 10/100 ethernet controller */
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index ee3630cb236a..157448827f61 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -234,7 +234,7 @@ static struct s3c2410_platform_nand __initdata osiris_nand_info = {
.nr_sets = ARRAY_SIZE(osiris_nand_sets),
.sets = osiris_nand_sets,
.select_chip = osiris_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* PCMCIA control and configuration */
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 5d48e5b6e738..16a05bf7cccb 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -281,7 +281,7 @@ static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(qt2410_nand_sets),
.sets = qt2410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* UDC */
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index fde98b175c75..5ecb42e8a028 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -620,7 +620,7 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
.sets = rx1950_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 529c6faf862f..a9408811dbdb 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -158,7 +158,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx3715_nand_sets),
.sets = rx3715_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *rx3715_devices[] __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index d76b28b65e65..c5fa215a527e 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -112,7 +112,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = {
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(vstms_nand_sets),
.sets = vstms_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *vstms_devices[] __initdata = {
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index e7080215c624..0d9acaf91701 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -199,7 +199,7 @@ static struct s3c2410_platform_nand hmt_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(hmt_nand_sets),
.sets = hmt_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct gpio_led hmt_leds[] = {
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 0dd36ae49e6a..6fbb57878746 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -136,7 +136,7 @@ static struct s3c2410_platform_nand mini6410_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(mini6410_nand_sets),
.sets = mini6410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 0ff88b6859c4..1e98e530a6aa 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -188,7 +188,7 @@ static struct s3c2410_platform_nand real6410_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(real6410_nand_sets),
.sets = real6410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *real6410_devices[] __initdata = {
diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 72a44b2411c1..bf7c73ede98f 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -260,7 +260,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
return err;
}
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, priv);
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index 076736351bc6..a0b5c539ca73 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -1056,17 +1056,17 @@ static int anfc_attach_chip(struct nand_chip *chip)
chip->ecc.read_page_raw = nand_monolithic_read_page_raw;
chip->ecc.write_page_raw = nand_monolithic_write_page_raw;
- switch (chip->ecc.mode) {
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
- case NAND_ECC_ON_DIE:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = anfc_init_hw_ecc_controller(nfc, chip);
break;
default:
dev_err(nfc->dev, "Unsupported ECC mode: %d\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -EINVAL;
}
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index d9839461e460..85cf396731ce 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1118,15 +1118,15 @@ static int atmel_nand_ecc_init(struct nand_chip *chip)
nc = to_nand_controller(chip->controller);
- switch (chip->ecc.mode) {
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
/*
* Nothing to do, the core will initialize everything for us.
*/
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = atmel_nand_pmecc_init(chip);
if (ret)
return ret;
@@ -1140,7 +1140,7 @@ static int atmel_nand_ecc_init(struct nand_chip *chip)
default:
/* Other modes are not supported. */
dev_err(nc->dev, "Unsupported ECC mode: %d\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -ENOTSUPP;
}
@@ -1155,7 +1155,7 @@ static int atmel_hsmc_nand_ecc_init(struct nand_chip *chip)
if (ret)
return ret;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
/* Adjust the ECC operations for the HSMC IP. */
@@ -1498,7 +1498,7 @@ static void atmel_nand_init(struct atmel_nand_controller *nc,
/* Default to HW ECC if pmecc is available. */
if (nc->pmecc)
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
}
static void atmel_smc_nand_init(struct atmel_nand_controller *nc,
diff --git a/drivers/mtd/nand/raw/au1550nd.c b/drivers/mtd/nand/raw/au1550nd.c
index ec2d90ad87de..79b057400fe9 100644
--- a/drivers/mtd/nand/raw/au1550nd.c
+++ b/drivers/mtd/nand/raw/au1550nd.c
@@ -294,7 +294,7 @@ static int au1550nd_probe(struct platform_device *pdev)
nand_controller_init(&ctx->controller);
ctx->controller.ops = &au1550nd_ops;
this->controller = &ctx->controller;
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (pd->devwidth)
diff --git a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
index 591775173034..8bb17c5a66c3 100644
--- a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
+++ b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
@@ -391,7 +391,8 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
nand_chip->legacy.chip_delay = 50;
b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
- b47n->nand_chip.ecc.mode = NAND_ECC_NONE; /* TODO: implement ECC */
+ /* TODO: implement ECC */
+ b47n->nand_chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_NONE;
/* Enable NAND flash access */
bcma_cc_set32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 2a9f2ff89fe7..164617b33942 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2539,9 +2539,9 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
cfg->col_adr_bytes = 2;
cfg->blk_adr_bytes = get_blk_adr_bytes(mtd->size, mtd->writesize);
- if (chip->ecc.mode != NAND_ECC_HW) {
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
dev_err(ctrl->dev, "only HW ECC supported; selected: %d\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -EINVAL;
}
@@ -2561,7 +2561,7 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
return -EINVAL;
}
- if (chip->ecc.mode != NAND_ECC_NONE &&
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!chip->ecc.size || !chip->ecc.strength)) {
if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
/* use detected ECC parameters */
@@ -2702,7 +2702,7 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
chip->legacy.read_buf = brcmnand_read_buf;
chip->legacy.write_buf = brcmnand_write_buf;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.read_page = brcmnand_read_page;
chip->ecc.write_page = brcmnand_write_page;
chip->ecc.read_page_raw = brcmnand_read_page_raw;
diff --git a/drivers/mtd/nand/raw/cadence-nand-controller.c b/drivers/mtd/nand/raw/cadence-nand-controller.c
index c405722adfe1..1bdec12f7893 100644
--- a/drivers/mtd/nand/raw/cadence-nand-controller.c
+++ b/drivers/mtd/nand/raw/cadence-nand-controller.c
@@ -2610,7 +2610,7 @@ static int cadence_nand_attach_chip(struct nand_chip *chip)
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->options |= NAND_NO_SUBPAGE_WRITE;
@@ -2756,7 +2756,7 @@ static int cadence_nand_chip_init(struct cdns_nand_ctrl *cdns_ctrl,
* Default to HW ECC engine mode. If the nand-ecc-mode property is given
* in the DT node, this entry will be overwritten in nand_scan_ident().
*/
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ret = nand_scan(chip, cdns_chip->nsels);
if (ret) {
diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index 2bf8ab542e38..2b94f385a1a8 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -629,7 +629,7 @@ static int cafe_nand_attach_chip(struct nand_chip *chip)
goto out_free_dma;
}
- cafe->nand.ecc.mode = NAND_ECC_HW;
+ cafe->nand.ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
cafe->nand.ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
cafe->nand.ecc.size = mtd->writesize;
cafe->nand.ecc.bytes = 14;
diff --git a/drivers/mtd/nand/raw/cs553x_nand.c b/drivers/mtd/nand/raw/cs553x_nand.c
index 9472bf798ed5..b7f3f6347761 100644
--- a/drivers/mtd/nand/raw/cs553x_nand.c
+++ b/drivers/mtd/nand/raw/cs553x_nand.c
@@ -286,7 +286,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
goto out_mtd;
}
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
this->ecc.size = 256;
this->ecc.bytes = 3;
this->ecc.hwctl = cs_enable_hwecc;
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 3640c7e45e15..58966a9706b1 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -530,11 +530,11 @@ static struct davinci_nand_pdata
if (!of_property_read_string(pdev->dev.of_node,
"ti,davinci-ecc-mode", &mode)) {
if (!strncmp("none", mode, 4))
- pdata->ecc_mode = NAND_ECC_NONE;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_NONE;
if (!strncmp("soft", mode, 4))
- pdata->ecc_mode = NAND_ECC_SOFT;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
if (!strncmp("hw", mode, 2))
- pdata->ecc_mode = NAND_ECC_HW;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
}
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-ecc-bits", &prop))
@@ -585,21 +585,21 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
if (IS_ERR(pdata))
return PTR_ERR(pdata);
- switch (info->chip.ecc.mode) {
- case NAND_ECC_NONE:
+ switch (info->chip.ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
pdata->ecc_bits = 0;
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
pdata->ecc_bits = 0;
/*
- * This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
- * avoid adding an extra ->ecc_algo field to
- * davinci_nand_pdata.
+ * This driver expects Hamming based ECC when engine_type is set
+ * to NAND_ECC_ENGINE_TYPE_SOFT. Force ecc.algo to
+ * NAND_ECC_ALGO_HAMMING to avoid adding an extra ->ecc_algo
+ * field to davinci_nand_pdata.
*/
info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
if (pdata->ecc_bits == 4) {
int chunks = mtd->writesize / 512;
@@ -850,7 +850,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
info->mask_cle = pdata->mask_cle ? : MASK_CLE;
/* Use board-specific ECC config */
- info->chip.ecc.mode = pdata->ecc_mode;
+ info->chip.ecc.engine_type = pdata->engine_type;
info->chip.ecc.placement = pdata->ecc_placement;
spin_lock_irq(&davinci_nand_lock);
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 514a97ea4450..a6a6464974ec 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1237,7 +1237,7 @@ int denali_chip_init(struct denali_controller *denali,
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
chip->options |= NAND_NO_SUBPAGE_WRITE;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.read_page = denali_read_page;
chip->ecc.write_page = denali_write_page;
diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c
index 40360352136b..94432a453e5e 100644
--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1456,7 +1456,7 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.calculate = doc200x_calculate_ecc;
nand->ecc.correct = doc200x_correct_data;
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index da89389faaae..b2af7f81fdf8 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -244,7 +244,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
return -EIO;
}
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
elbc_fcm_ctrl->max_bitflips = 0;
@@ -727,12 +727,12 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
unsigned int al;
- switch (chip->ecc.mode) {
+ switch (chip->ecc.engine_type) {
/*
* if ECC was not chosen in DT, decide whether to use HW or SW ECC from
* CS Base Register
*/
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
/* If CS Base Register selects full hardware ECC then use it */
if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
BR_DECC_CHK_GEN) {
@@ -740,23 +740,23 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
chip->ecc.write_page = fsl_elbc_write_page;
chip->ecc.write_subpage = fsl_elbc_write_subpage;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
} else {
/* otherwise fall back to default software ECC */
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
break;
/* if SW ECC was chosen in DT, we do not need to set anything here */
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
break;
- /* should we also implement NAND_ECC_HW to do as the code above? */
+ /* should we also implement *_ECC_ENGINE_CONTROLLER to do as above? */
default:
return -EINVAL;
}
@@ -786,8 +786,8 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
chip->page_shift);
dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
chip->phys_erase_shift);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
- chip->ecc.mode);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.engine_type = %d\n",
+ chip->ecc.engine_type);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
chip->ecc.steps);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index b2ae759dd14e..0e7a9b64301e 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -309,7 +309,7 @@ static void fsl_ifc_cmdfunc(struct nand_chip *chip, unsigned int command,
ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
ifc_nand_ctrl->index += column;
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
ifc_nand_ctrl->eccread = 1;
fsl_ifc_do_read(chip, 0, mtd);
@@ -724,8 +724,8 @@ static int fsl_ifc_attach_chip(struct nand_chip *chip)
chip->page_shift);
dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__,
chip->phys_erase_shift);
- dev_dbg(priv->dev, "%s: nand->ecc.mode = %d\n", __func__,
- chip->ecc.mode);
+ dev_dbg(priv->dev, "%s: nand->ecc.engine_type = %d\n", __func__,
+ chip->ecc.engine_type);
dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__,
chip->ecc.steps);
dev_dbg(priv->dev, "%s: nand->ecc.bytes = %d\n", __func__,
@@ -912,7 +912,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
if (csor & CSOR_NAND_ECC_DEC_EN) {
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops);
/* Hardware generates ECC per 512 Bytes */
@@ -925,7 +925,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->ecc.strength = 8;
}
} else {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
diff --git a/drivers/mtd/nand/raw/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c
index 49592b7e03a3..fc5a9df27cf1 100644
--- a/drivers/mtd/nand/raw/fsl_upm.c
+++ b/drivers/mtd/nand/raw/fsl_upm.c
@@ -163,7 +163,7 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
fun->chip.legacy.read_byte = fun_read_byte;
fun->chip.legacy.read_buf = fun_read_buf;
fun->chip.legacy.write_buf = fun_write_buf;
- fun->chip.ecc.mode = NAND_ECC_SOFT;
+ fun->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
fun->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
if (fun->mchip_count > 1)
fun->chip.legacy.select_chip = fun_select_chip;
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index ced570987e85..fd2926d6f5b2 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -900,8 +900,8 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
return 0;
}
- switch (nand->ecc.mode) {
- case NAND_ECC_HW:
+ switch (nand->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
dev_info(host->dev, "Using 1-bit HW ECC scheme\n");
nand->ecc.calculate = fsmc_read_hwecc_ecc1;
nand->ecc.correct = nand_correct_data;
@@ -910,14 +910,14 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
nand->ecc.options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
if (nand->ecc.algo == NAND_ECC_ALGO_BCH) {
dev_info(host->dev,
"Using 4-bit SW BCH ECC scheme\n");
break;
}
- case NAND_ECC_ON_DIE:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
break;
default:
@@ -929,7 +929,7 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
* Don't set layout for BCH4 SW ECC. This will be
* generated later in nand_bch_init() later.
*/
- if (nand->ecc.mode == NAND_ECC_HW) {
+ if (nand->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
switch (mtd->oobsize) {
case 16:
case 64:
@@ -1059,7 +1059,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
* Setup default ECC mode. nand_dt_init() called from nand_scan_ident()
* can overwrite this value if the DT provides a different value.
*/
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.hwctl = fsmc_enable_hwecc;
nand->ecc.size = 512;
nand->badblockbits = 7;
diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/gpio.c
index 667807c7100b..13645a8157a8 100644
--- a/drivers/mtd/nand/raw/gpio.c
+++ b/drivers/mtd/nand/raw/gpio.c
@@ -275,7 +275,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
nand_set_flash_node(chip, pdev->dev.of_node);
chip->legacy.IO_ADDR_W = chip->legacy.IO_ADDR_R;
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
chip->options = gpiomtd->plat.options;
chip->legacy.chip_delay = gpiomtd->plat.chip_delay;
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 061a8ddda275..d1ea6df9fd64 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -2032,7 +2032,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
ecc->write_page_raw = gpmi_ecc_write_page_raw;
ecc->read_oob_raw = gpmi_ecc_read_oob_raw;
ecc->write_oob_raw = gpmi_ecc_write_oob_raw;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ecc->size = bch_geo->ecc_chunk_size;
ecc->strength = bch_geo->ecc_strength;
mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops);
diff --git a/drivers/mtd/nand/raw/hisi504_nand.c b/drivers/mtd/nand/raw/hisi504_nand.c
index b84238e2268a..8b2122ce6ec3 100644
--- a/drivers/mtd/nand/raw/hisi504_nand.c
+++ b/drivers/mtd/nand/raw/hisi504_nand.c
@@ -186,7 +186,7 @@ static void hisi_nfc_dma_transfer(struct hinfc_host *host, int todev)
hinfc_write(host, host->dma_buffer, HINFC504_DMA_ADDR_DATA);
hinfc_write(host, host->dma_oob, HINFC504_DMA_ADDR_OOB);
- if (chip->ecc.mode == NAND_ECC_NONE) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
hinfc_write(host, ((mtd->oobsize & HINFC504_DMA_LEN_OOB_MASK)
<< HINFC504_DMA_LEN_OOB_SHIFT), HINFC504_DMA_LEN);
@@ -468,7 +468,7 @@ static void hisi_nfc_cmdfunc(struct nand_chip *chip, unsigned command,
case NAND_CMD_STATUS:
flag = hinfc_read(host, HINFC504_CON);
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
hinfc_write(host,
flag & ~(HINFC504_CON_ECCTYPE_MASK <<
HINFC504_CON_ECCTYPE_SHIFT), HINFC504_CON);
@@ -721,7 +721,7 @@ static int hisi_nfc_attach_chip(struct nand_chip *chip)
}
hinfc_write(host, flag, HINFC504_CON);
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
hisi_nfc_ecc_probe(host);
return 0;
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
index 69423bb29adb..70309f18124c 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -194,8 +194,8 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
(chip->ecc.strength / 8);
}
- switch (chip->ecc.mode) {
- case NAND_ECC_HW:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
if (!nfc->ecc) {
dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
return -ENODEV;
@@ -205,22 +205,22 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
chip->ecc.calculate = ingenic_nand_ecc_calculate;
chip->ecc.correct = ingenic_nand_ecc_correct;
fallthrough;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
(nfc->ecc) ? "hardware ECC" : "software ECC",
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
break;
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
dev_info(nfc->dev, "not using ECC\n");
break;
default:
dev_err(nfc->dev, "ECC mode %d not supported\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -EINVAL;
}
/* The NAND core will generate the ECC layout for SW ECC */
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
@@ -404,7 +404,7 @@ static int ingenic_nand_init_chip(struct platform_device *pdev,
mtd->dev.parent = dev;
chip->options = NAND_NO_SUBPAGE_WRITE;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->controller = &nfc->controller;
nand_set_flash_node(chip, np);
diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c
index 7521038af2ef..4940bb2e3c07 100644
--- a/drivers/mtd/nand/raw/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c
@@ -656,7 +656,7 @@ static int lpc32xx_nand_attach_chip(struct nand_chip *chip)
if (!host->dummy_buf)
return -ENOMEM;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
host->mlcsubpages = mtd->writesize / 512;
diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index ccb189c8e343..6db9d2ed6881 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -881,7 +881,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
/* NAND callbacks for LPC32xx SLC hardware */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->legacy.read_byte = lpc32xx_nand_read_byte;
chip->legacy.read_buf = lpc32xx_nand_read_buf;
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 3969cca7d925..f9cc03c11deb 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2247,7 +2247,8 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
int ret;
- if (ecc->mode != NAND_ECC_NONE && (!ecc->size || !ecc->strength)) {
+ if (ecc->engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
+ (!ecc->size || !ecc->strength)) {
if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
ecc->size = chip->base.eccreq.step_size;
ecc->strength = chip->base.eccreq.strength;
@@ -2259,15 +2260,15 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
}
}
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = marvell_nand_hw_ecc_controller_init(mtd, ecc);
if (ret)
return ret;
break;
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
- case NAND_ECC_ON_DIE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
if (!nfc->caps->is_nfcv2 && mtd->writesize != SZ_512 &&
mtd->writesize != SZ_2K) {
dev_err(nfc->dev, "NFCv1 cannot write %d bytes pages\n",
@@ -2465,7 +2466,7 @@ static int marvell_nand_attach_chip(struct nand_chip *chip)
return ret;
}
- if (chip->ecc.mode == NAND_ECC_HW) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
/*
* Subpage write not available with hardware ECC, prohibit also
* subpage read as in userspace subpage access would still be
@@ -2640,7 +2641,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
* Default to HW ECC engine mode. If the nand-ecc-mode property is given
* in the DT node, this entry will be overwritten in nand_scan_ident().
*/
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
/*
* Save a reference value for timing registers before
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 3f376471f3f7..4d1f5c8da270 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1197,7 +1197,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand)
if (ret)
return -EINVAL;
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.write_page_raw = meson_nfc_write_page_raw;
nand->ecc.write_page = meson_nfc_write_page_hwecc;
nand->ecc.write_oob_raw = nand_write_oob_std;
diff --git a/drivers/mtd/nand/raw/mpc5121_nfc.c b/drivers/mtd/nand/raw/mpc5121_nfc.c
index a67eded226db..dfd0d3ed5ed0 100644
--- a/drivers/mtd/nand/raw/mpc5121_nfc.c
+++ b/drivers/mtd/nand/raw/mpc5121_nfc.c
@@ -688,7 +688,7 @@ static int mpc5121_nfc_probe(struct platform_device *op)
chip->legacy.set_features = nand_get_set_features_notsupp;
chip->legacy.get_features = nand_get_set_features_notsupp;
chip->bbt_options = NAND_BBT_USE_FLASH;
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Support external chip-select logic on ADS5121 board */
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index c1a6e31aabb8..a0294c9161dd 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1226,8 +1226,8 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
int free, ret;
/* support only ecc hw mode */
- if (nand->ecc.mode != NAND_ECC_HW) {
- dev_err(dev, "ecc.mode not supported\n");
+ if (nand->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
+ dev_err(dev, "ecc.engine_type not supported\n");
return -EINVAL;
}
@@ -1390,7 +1390,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
nand->legacy.cmd_ctrl = mtk_nfc_cmd_ctrl;
/* set default mode in case dt entry is missing */
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.write_subpage = mtk_nfc_write_subpage_hwecc;
nand->ecc.write_page_raw = mtk_nfc_write_page_raw;
diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index c2e9759cfba8..de3bd36f99e9 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -669,7 +669,7 @@ static void mxc_nand_enable_hwecc_v1_v2(struct nand_chip *chip, bool enable)
struct mxc_nand_host *host = nand_get_controller_data(chip);
uint16_t config1;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return;
config1 = readw(NFC_V1_V2_CONFIG1);
@@ -687,7 +687,7 @@ static void mxc_nand_enable_hwecc_v3(struct nand_chip *chip, bool enable)
struct mxc_nand_host *host = nand_get_controller_data(chip);
uint32_t config2;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return;
config2 = readl(NFC_V3_CONFIG2);
@@ -1117,7 +1117,8 @@ static void preset_v1(struct mtd_info *mtd)
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
uint16_t config1 = 0;
- if (nand_chip->ecc.mode == NAND_ECC_HW && mtd->writesize)
+ if (nand_chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST &&
+ mtd->writesize)
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
if (!host->devtype_data->irqpending_quirk)
@@ -1227,7 +1228,7 @@ static void preset_v2(struct mtd_info *mtd)
if (mtd->writesize) {
uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
- if (nand_chip->ecc.mode == NAND_ECC_HW)
+ if (nand_chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
host->eccsize = get_eccsize(mtd);
@@ -1303,7 +1304,7 @@ static void preset_v3(struct mtd_info *mtd)
}
if (mtd->writesize) {
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
config2 |= NFC_V3_CONFIG2_ECC_EN;
config2 |= NFC_V3_CONFIG2_PPB(
@@ -1680,8 +1681,8 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
struct mxc_nand_host *host = nand_get_controller_data(chip);
struct device *dev = mtd->dev.parent;
- switch (chip->ecc.mode) {
- case NAND_ECC_HW:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
chip->ecc.read_page = mxc_nand_read_page;
chip->ecc.read_page_raw = mxc_nand_read_page_raw;
chip->ecc.read_oob = mxc_nand_read_oob;
@@ -1690,7 +1691,7 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
chip->ecc.write_oob = mxc_nand_write_oob;
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
break;
default:
@@ -1728,7 +1729,7 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
*/
host->used_oobsize = min(mtd->oobsize, 218U);
- if (chip->ecc.mode == NAND_ECC_HW) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
if (is_imx21_nfc(host) || is_imx27_nfc(host))
chip->ecc.strength = 1;
else
@@ -1843,9 +1844,9 @@ static int mxcnd_probe(struct platform_device *pdev)
mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
if (host->pdata.hw_ecc) {
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
} else {
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 9de58c4c4443..2821c82b79ad 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5018,28 +5018,45 @@ static const char * const nand_ecc_modes[] = {
[NAND_ECC_ON_DIE] = "on-die",
};
-static int of_get_nand_ecc_mode(struct device_node *np)
+static enum nand_ecc_engine_type
+of_get_nand_ecc_engine_type(struct device_node *np)
{
+ enum nand_ecc_mode eng_type;
const char *pm;
- int err, i;
+ int err;
err = of_property_read_string(np, "nand-ecc-mode", &pm);
- if (err < 0)
- return err;
+ if (err)
+ return NAND_ECC_ENGINE_TYPE_INVALID;
- for (i = NAND_ECC_NONE; i < ARRAY_SIZE(nand_ecc_modes); i++)
- if (!strcasecmp(pm, nand_ecc_modes[i]))
- return i;
+ for (eng_type = NAND_ECC_NONE;
+ eng_type < ARRAY_SIZE(nand_ecc_modes); eng_type++) {
+ if (!strcasecmp(pm, nand_ecc_modes[eng_type])) {
+ switch (eng_type) {
+ case NAND_ECC_NONE:
+ return NAND_ECC_ENGINE_TYPE_NONE;
+ case NAND_ECC_SOFT:
+ return NAND_ECC_ENGINE_TYPE_SOFT;
+ case NAND_ECC_HW:
+ case NAND_ECC_HW_SYNDROME:
+ return NAND_ECC_ENGINE_TYPE_ON_HOST;
+ case NAND_ECC_ON_DIE:
+ return NAND_ECC_ENGINE_TYPE_ON_DIE;
+ default:
+ break;
+ }
+ }
+ }
/*
* For backward compatibility we support few obsoleted values that don't
- * have their mappings into the nand_ecc_mode enum anymore (they were
- * merged with other enums).
+ * have their mappings into the nand_ecc_engine_providers enum anymore
+ * (they were merged with other enums).
*/
if (!strcasecmp(pm, "soft_bch"))
- return NAND_ECC_SOFT;
+ return NAND_ECC_ENGINE_TYPE_SOFT;
- return -ENODEV;
+ return NAND_ECC_ENGINE_TYPE_INVALID;
}
static const char * const nand_ecc_algos[] = {
@@ -5121,8 +5138,9 @@ static bool of_get_nand_on_flash_bbt(struct device_node *np)
static int nand_dt_init(struct nand_chip *chip)
{
struct device_node *dn = nand_get_flash_node(chip);
+ enum nand_ecc_engine_type ecc_type;
enum nand_ecc_algo ecc_algo;
- int ecc_mode, ecc_strength, ecc_step;
+ int ecc_strength, ecc_step;
if (!dn)
return 0;
@@ -5136,13 +5154,13 @@ static int nand_dt_init(struct nand_chip *chip)
if (of_get_nand_on_flash_bbt(dn))
chip->bbt_options |= NAND_BBT_USE_FLASH;
- ecc_mode = of_get_nand_ecc_mode(dn);
+ ecc_type = of_get_nand_ecc_engine_type(dn);
ecc_algo = of_get_nand_ecc_algo(dn);
ecc_strength = of_get_nand_ecc_strength(dn);
ecc_step = of_get_nand_ecc_step_size(dn);
- if (ecc_mode >= 0)
- chip->ecc.mode = ecc_mode;
+ if (ecc_type != NAND_ECC_ENGINE_TYPE_INVALID)
+ chip->ecc.engine_type = ecc_type;
if (ecc_algo != NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = ecc_algo;
@@ -5264,7 +5282,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
- if (WARN_ON(ecc->mode != NAND_ECC_SOFT))
+ if (WARN_ON(ecc->engine_type != NAND_ECC_ENGINE_TYPE_SOFT))
return -EINVAL;
switch (ecc->algo) {
@@ -5729,7 +5747,8 @@ static int nand_scan_tail(struct nand_chip *chip)
* If no default placement scheme is given, select an appropriate one.
*/
if (!mtd->ooblayout &&
- !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_ALGO_BCH)) {
+ !(ecc->engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ ecc->algo == NAND_ECC_ALGO_BCH)) {
switch (mtd->oobsize) {
case 8:
case 16:
@@ -5747,7 +5766,7 @@ static int nand_scan_tail(struct nand_chip *chip)
* page with ECC layout when ->oobsize <= 128 for
* compatibility reasons.
*/
- if (ecc->mode == NAND_ECC_NONE) {
+ if (ecc->engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
mtd_set_ooblayout(mtd,
&nand_ooblayout_lp_ops);
break;
@@ -5765,8 +5784,9 @@ static int nand_scan_tail(struct nand_chip *chip)
* selected and we have 256 byte pagesize fallback to software ECC
*/
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
+
switch (ecc->placement) {
case NAND_ECC_PLACEMENT_UNKNOWN:
case NAND_ECC_PLACEMENT_OOB:
@@ -5823,7 +5843,7 @@ static int nand_scan_tail(struct nand_chip *chip)
}
pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
ecc->size, mtd->writesize);
- ecc->mode = NAND_ECC_SOFT;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
ecc->algo = NAND_ECC_ALGO_HAMMING;
break;
@@ -5835,7 +5855,7 @@ static int nand_scan_tail(struct nand_chip *chip)
}
fallthrough;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
ret = nand_set_ecc_soft_ops(chip);
if (ret) {
ret = -EINVAL;
@@ -5843,7 +5863,7 @@ static int nand_scan_tail(struct nand_chip *chip)
}
break;
- case NAND_ECC_ON_DIE:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
if (!ecc->read_page || !ecc->write_page) {
WARN(1, "No ECC functions supplied; on-die ECC not possible\n");
ret = -EINVAL;
@@ -5855,8 +5875,8 @@ static int nand_scan_tail(struct nand_chip *chip)
ecc->write_oob = nand_write_oob_std;
break;
- case NAND_ECC_NONE:
- pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ pr_warn("NAND_ECC_ENGINE_TYPE_NONE selected by board driver. This is not recommended!\n");
ecc->read_page = nand_read_page_raw;
ecc->write_page = nand_write_page_raw;
ecc->read_oob = nand_read_oob_std;
@@ -5869,7 +5889,7 @@ static int nand_scan_tail(struct nand_chip *chip)
break;
default:
- WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode);
+ WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->engine_type);
ret = -EINVAL;
goto err_nand_manuf_cleanup;
}
@@ -5946,8 +5966,8 @@ static int nand_scan_tail(struct nand_chip *chip)
chip->pagecache.page = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
- switch (ecc->mode) {
- case NAND_ECC_SOFT:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_SOFT:
if (chip->page_shift > 9)
chip->options |= NAND_SUBPAGE_READ;
break;
@@ -6089,7 +6109,7 @@ EXPORT_SYMBOL(nand_scan_with_ids);
*/
void nand_cleanup(struct nand_chip *chip)
{
- if (chip->ecc.mode == NAND_ECC_SOFT &&
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
chip->ecc.algo == NAND_ECC_ALGO_BCH)
nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index a43b4d17bc69..c8ebfd8c77a1 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -497,13 +497,13 @@ static int micron_nand_init(struct nand_chip *chip)
ondie = micron_supports_on_die_ecc(chip);
if (ondie == MICRON_ON_DIE_MANDATORY &&
- chip->ecc.mode != NAND_ECC_ON_DIE) {
+ chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_DIE) {
pr_err("On-die ECC forcefully enabled, not supported\n");
ret = -EINVAL;
goto err_free_manuf_data;
}
- if (chip->ecc.mode == NAND_ECC_ON_DIE) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE) {
if (ondie == MICRON_ON_DIE_UNSUPPORTED) {
pr_err("On-die ECC selected but not supported\n");
ret = -EINVAL;
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index ae069905d7e4..436ed90a90ad 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -211,7 +211,8 @@ static int toshiba_nand_init(struct nand_chip *chip)
chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
/* Check that chip is BENAND and ECC mode is on-die */
- if (nand_is_slc(chip) && chip->ecc.mode == NAND_ECC_ON_DIE &&
+ if (nand_is_slc(chip) &&
+ chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE &&
chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND)
toshiba_nand_benand_init(chip);
diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index 9bcf1b9d4987..9c2115fe2111 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2234,7 +2234,7 @@ static int ns_attach_chip(struct nand_chip *chip)
return -EINVAL;
}
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.size = 512;
chip->ecc.strength = bch;
@@ -2274,7 +2274,7 @@ static int __init ns_init_module(void)
nsmtd = nand_to_mtd(chip);
nand_set_controller_data(chip, (void *)ns);
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
/* and 'badblocks' parameters to work */
diff --git a/drivers/mtd/nand/raw/ndfc.c b/drivers/mtd/nand/raw/ndfc.c
index ed38338c1383..0fb4ba93c41e 100644
--- a/drivers/mtd/nand/raw/ndfc.c
+++ b/drivers/mtd/nand/raw/ndfc.c
@@ -149,7 +149,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
chip->ecc.correct = nand_correct_data;
chip->ecc.hwctl = ndfc_enable_hwecc;
chip->ecc.calculate = ndfc_calculate_ecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 256;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index 967ddbda1c48..512f60780a50 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -884,8 +884,8 @@ static int omap_correct_data(struct nand_chip *chip, u_char *dat,
int stat = 0;
/* Ex NAND_ECC_HW12_2048 */
- if ((info->nand.ecc.mode == NAND_ECC_HW) &&
- (info->nand.ecc.size == 2048))
+ if (info->nand.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST &&
+ info->nand.ecc.size == 2048)
blockCnt = 4;
else
blockCnt = 1;
@@ -2006,11 +2006,11 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
return -EINVAL;
/*
- * Bail out earlier to let NAND_ECC_SOFT code create its own
+ * Bail out earlier to let NAND_ECC_ENGINE_TYPE_SOFT code create its own
* ooblayout instead of using ours.
*/
if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
}
@@ -2019,7 +2019,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
switch (info->ecc_opt) {
case OMAP_ECC_HAM1_CODE_HW:
dev_info(dev, "nand: using OMAP_ECC_HAM1_CODE_HW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.bytes = 3;
chip->ecc.size = 512;
chip->ecc.strength = 1;
@@ -2036,7 +2036,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 7;
chip->ecc.strength = 4;
@@ -2056,7 +2056,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH4_CODE_HW:
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
/* 14th bit is kept reserved for ROM-code compatibility */
chip->ecc.bytes = 7 + 1;
@@ -2078,7 +2078,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 13;
chip->ecc.strength = 8;
@@ -2098,7 +2098,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH8_CODE_HW:
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
/* 14th bit is kept reserved for ROM-code compatibility */
chip->ecc.bytes = 13 + 1;
@@ -2121,7 +2121,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH16_CODE_HW:
pr_info("Using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 26;
chip->ecc.strength = 16;
diff --git a/drivers/mtd/nand/raw/orion_nand.c b/drivers/mtd/nand/raw/orion_nand.c
index 7a5cfa3d883f..df9c0f8e4b4e 100644
--- a/drivers/mtd/nand/raw/orion_nand.c
+++ b/drivers/mtd/nand/raw/orion_nand.c
@@ -139,7 +139,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
nc->legacy.IO_ADDR_R = nc->legacy.IO_ADDR_W = io_base;
nc->legacy.cmd_ctrl = orion_nand_cmd_ctrl;
nc->legacy.read_buf = orion_nand_read_buf;
- nc->ecc.mode = NAND_ECC_SOFT;
+ nc->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
nc->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (board->chip_delay)
diff --git a/drivers/mtd/nand/raw/pasemi_nand.c b/drivers/mtd/nand/raw/pasemi_nand.c
index 3eddc284614d..155e8c8f61e2 100644
--- a/drivers/mtd/nand/raw/pasemi_nand.c
+++ b/drivers/mtd/nand/raw/pasemi_nand.c
@@ -132,7 +132,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
chip->legacy.read_buf = pasemi_read_buf;
chip->legacy.write_buf = pasemi_write_buf;
chip->legacy.chip_delay = 0;
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Enable the following for a flash based bad block table */
diff --git a/drivers/mtd/nand/raw/plat_nand.c b/drivers/mtd/nand/raw/plat_nand.c
index dbc089c8872f..b98c0d5c413f 100644
--- a/drivers/mtd/nand/raw/plat_nand.c
+++ b/drivers/mtd/nand/raw/plat_nand.c
@@ -66,7 +66,7 @@ static int plat_nand_probe(struct platform_device *pdev)
data->chip.options |= pdata->chip.options;
data->chip.bbt_options |= pdata->chip.bbt_options;
- data->chip.ecc.mode = NAND_ECC_SOFT;
+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index f1daf330951b..0a05674b3ab5 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2548,7 +2548,7 @@ static int qcom_nand_attach_chip(struct nand_chip *chip)
ecc->write_page_raw = qcom_nandc_write_page_raw;
ecc->write_oob = qcom_nandc_write_oob;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
diff --git a/drivers/mtd/nand/raw/r852.c b/drivers/mtd/nand/raw/r852.c
index f0988cda4479..6b7addd2c420 100644
--- a/drivers/mtd/nand/raw/r852.c
+++ b/drivers/mtd/nand/raw/r852.c
@@ -859,7 +859,7 @@ static int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
chip->legacy.write_buf = r852_write_buf;
/* ecc */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.size = R852_DMA_LEN;
chip->ecc.bytes = SM_OOB_SIZE;
diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
index dfe5a0f07385..88301fd29729 100644
--- a/drivers/mtd/nand/raw/s3c2410.c
+++ b/drivers/mtd/nand/raw/s3c2410.c
@@ -904,7 +904,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
nmtd->info = info;
nmtd->set = set;
- chip->ecc.mode = info->platform->ecc_mode;
+ chip->ecc.engine_type = info->platform->engine_type;
/*
* If you use u-boot BBT creation code, specifying this flag will
@@ -929,24 +929,24 @@ static int s3c2410_nand_attach_chip(struct nand_chip *chip)
struct mtd_info *mtd = nand_to_mtd(chip);
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
- switch (chip->ecc.mode) {
+ switch (chip->ecc.engine_type) {
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
dev_info(info->device, "ECC disabled\n");
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
/*
- * This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
- * avoid adding an extra ecc_algo field to
- * s3c2410_platform_nand.
+ * This driver expects Hamming based ECC when engine_type is set
+ * to NAND_ECC_ENGINE_TYPE_SOFT. Force ecc.algo to
+ * NAND_ECC_ALGO_HAMMING to avoid adding an extra ecc_algo field
+ * to s3c2410_platform_nand.
*/
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
dev_info(info->device, "soft ECC\n");
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
chip->ecc.calculate = s3c2410_nand_calculate_ecc;
chip->ecc.correct = s3c2410_nand_correct_data;
chip->ecc.strength = 1;
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index 9dbd6fdbe264..13df4bdf792a 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -1039,12 +1039,12 @@ static int flctl_chip_attach_chip(struct nand_chip *chip)
chip->ecc.strength = 4;
chip->ecc.read_page = flctl_read_page_hwecc;
chip->ecc.write_page = flctl_write_page_hwecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
/* 4 symbols ECC enabled */
flctl->flcmncr_base |= _4ECCEN;
} else {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
diff --git a/drivers/mtd/nand/raw/sharpsl.c b/drivers/mtd/nand/raw/sharpsl.c
index 51286f7acf54..1327bfb3d5d3 100644
--- a/drivers/mtd/nand/raw/sharpsl.c
+++ b/drivers/mtd/nand/raw/sharpsl.c
@@ -157,7 +157,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
/* 15 us command delay time */
this->legacy.chip_delay = 15;
/* set eccmode using hardware ECC */
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
this->ecc.size = 256;
this->ecc.bytes = 3;
this->ecc.strength = 1;
diff --git a/drivers/mtd/nand/raw/socrates_nand.c b/drivers/mtd/nand/raw/socrates_nand.c
index 72a3a7f98282..0f63ff6f7fe7 100644
--- a/drivers/mtd/nand/raw/socrates_nand.c
+++ b/drivers/mtd/nand/raw/socrates_nand.c
@@ -153,7 +153,8 @@ static int socrates_nand_probe(struct platform_device *ofdev)
nand_chip->legacy.read_buf = socrates_nand_read_buf;
nand_chip->legacy.dev_ready = socrates_nand_device_ready;
- nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
+ /* enable ECC */
+ nand_chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
nand_chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* TODO: I have no idea what real delay is. */
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 65c9d17b25a3..d4f016d9251f 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1725,14 +1725,15 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip)
int ret;
/*
- * Only NAND_ECC_HW mode is actually supported
+ * Only NAND_ECC_ENGINE_TYPE_ON_HOST mode is actually supported
* Hamming => ecc.strength = 1
* BCH4 => ecc.strength = 4
* BCH8 => ecc.strength = 8
* ECC sector size = 512
*/
- if (chip->ecc.mode != NAND_ECC_HW) {
- dev_err(nfc->dev, "nand_ecc_mode is not well defined in the DT\n");
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
+ dev_err(nfc->dev,
+ "nand_ecc_engine_type is not well defined in the DT\n");
return -EINVAL;
}
@@ -1942,7 +1943,7 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
NAND_USES_DMA;
/* Default ECC settings */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = FMC2_ECC_STEP_SIZE;
chip->ecc.strength = FMC2_ECC_BCH8;
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index ffbc1651fadc..c6dd2e6d9ef8 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1575,7 +1575,7 @@ static int sunxi_nand_ooblayout_free(struct mtd_info *mtd, int section,
* only have 2 bytes available in the first user data
* section.
*/
- if (!section && ecc->mode == NAND_ECC_HW) {
+ if (!section && ecc->engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
oobregion->offset = 2;
oobregion->length = 2;
@@ -1720,11 +1720,11 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
{
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
sunxi_nand_hw_ecc_ctrl_cleanup(ecc);
break;
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
default:
break;
}
@@ -1752,14 +1752,14 @@ static int sunxi_nand_attach_chip(struct nand_chip *nand)
if (!ecc->size || !ecc->strength)
return -EINVAL;
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = sunxi_nand_hw_ecc_ctrl_init(nand, ecc, np);
if (ret)
return ret;
break;
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
break;
default:
return -EINVAL;
@@ -1991,7 +1991,7 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
* Set the ECC mode to the default value in case nothing is specified
* in the DT.
*/
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand_set_flash_node(nand, np);
mtd = nand_to_mtd(nand);
diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c
index 2154b6f860dd..b0872b9cd768 100644
--- a/drivers/mtd/nand/raw/tango_nand.c
+++ b/drivers/mtd/nand/raw/tango_nand.c
@@ -511,7 +511,7 @@ static int tango_attach_chip(struct nand_chip *chip)
{
struct nand_ecc_ctrl *ecc = &chip->ecc;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ecc->algo = NAND_ECC_ALGO_BCH;
ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index e2e13effc8a6..2325b06ccc9a 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -916,7 +916,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (chip->bbt_options & NAND_BBT_USE_FLASH)
chip->bbt_options |= NAND_BBT_NO_OOB;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.steps = mtd->writesize / chip->ecc.size;
if (chip->base.eccreq.step_size != 512) {
diff --git a/drivers/mtd/nand/raw/tmio_nand.c b/drivers/mtd/nand/raw/tmio_nand.c
index 843a8683b737..235a2f7b1bad 100644
--- a/drivers/mtd/nand/raw/tmio_nand.c
+++ b/drivers/mtd/nand/raw/tmio_nand.c
@@ -410,7 +410,7 @@ static int tmio_probe(struct platform_device *dev)
nand_chip->legacy.read_buf = tmio_nand_read_buf;
/* set eccmode using hardware ECC */
- nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand_chip->ecc.size = 512;
nand_chip->ecc.bytes = 6;
nand_chip->ecc.strength = 2;
diff --git a/drivers/mtd/nand/raw/txx9ndfmc.c b/drivers/mtd/nand/raw/txx9ndfmc.c
index 47d966871445..ef81dce6b5c4 100644
--- a/drivers/mtd/nand/raw/txx9ndfmc.c
+++ b/drivers/mtd/nand/raw/txx9ndfmc.c
@@ -329,7 +329,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
chip->ecc.calculate = txx9ndfmc_calculate_ecc;
chip->ecc.correct = txx9ndfmc_correct_data;
chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.strength = 1;
chip->legacy.chip_delay = 100;
chip->controller = &drvdata->controller;
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index 7248c5901183..8ee2c1f539c4 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -732,7 +732,7 @@ static void vf610_nfc_init_controller(struct vf610_nfc *nfc)
else
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
- if (nfc->chip.ecc.mode == NAND_ECC_HW) {
+ if (nfc->chip.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
/* Set ECC status offset in SRAM */
vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
CONFIG_ECC_SRAM_ADDR_MASK,
@@ -761,7 +761,7 @@ static int vf610_nfc_attach_chip(struct nand_chip *chip)
return -ENXIO;
}
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
diff --git a/drivers/mtd/nand/raw/xway_nand.c b/drivers/mtd/nand/raw/xway_nand.c
index 909072e82a68..3332c9aa462a 100644
--- a/drivers/mtd/nand/raw/xway_nand.c
+++ b/drivers/mtd/nand/raw/xway_nand.c
@@ -180,7 +180,7 @@ static int xway_nand_probe(struct platform_device *pdev)
data->chip.legacy.read_byte = xway_read_byte;
data->chip.legacy.chip_delay = 30;
- data->chip.ecc.mode = NAND_ECC_SOFT;
+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 63aa061427bb..8f7f1cce3b4b 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -303,7 +303,7 @@ static const struct nand_ecc_caps __name = { \
/**
* struct nand_ecc_ctrl - Control structure for ECC
- * @mode: ECC mode
+ * @engine_type: ECC engine type
* @placement: OOB bytes placement
* @algo: ECC algorithm
* @steps: number of ECC steps per page
@@ -356,7 +356,7 @@ static const struct nand_ecc_caps __name = { \
* @write_oob: function to write chip OOB data
*/
struct nand_ecc_ctrl {
- enum nand_ecc_mode mode;
+ enum nand_ecc_engine_type engine_type;
enum nand_ecc_placement placement;
enum nand_ecc_algo algo;
int steps;
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h
index 6e2b252a4ce6..dd474dd44848 100644
--- a/include/linux/platform_data/mtd-davinci.h
+++ b/include/linux/platform_data/mtd-davinci.h
@@ -60,15 +60,15 @@ struct davinci_nand_pdata { /* platform_data */
struct mtd_partition *parts;
unsigned nr_parts;
- /* none == NAND_ECC_NONE (strongly *not* advised!!)
- * soft == NAND_ECC_SOFT
- * else == NAND_ECC_HW, according to ecc_bits
+ /* none == NAND_ECC_ENGINE_TYPE_NONE (strongly *not* advised!!)
+ * soft == NAND_ECC_ENGINE_TYPE_SOFT
+ * else == NAND_ECC_ENGINE_TYPE_ON_HOST, according to ecc_bits
*
* All DaVinci-family chips support 1-bit hardware ECC.
* Newer ones also support 4-bit ECC, but are awkward
* using it with large page chips.
*/
- enum nand_ecc_mode ecc_mode;
+ enum nand_ecc_engine_type engine_type;
enum nand_ecc_placement ecc_placement;
u8 ecc_bits;
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index 08675b16f9e1..25390fc3e795 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -49,7 +49,7 @@ struct s3c2410_platform_nand {
unsigned int ignore_unset_ecc:1;
- enum nand_ecc_mode ecc_mode;
+ enum nand_ecc_engine_type engine_type;
int nr_sets;
struct s3c2410_nand_set *sets;
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 10/20] mtd: rawnand: Use the new ECC engine type enumeration
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Mechanical switch from the legacy "mode" enumeration to the new
"engine type" enumeration in drivers and board files.
The device tree parsing is also updated to return the new enumeration
from the old strings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
arch/arm/mach-davinci/board-da830-evm.c | 2 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-leopard.c | 2 +-
arch/arm/mach-davinci/board-dm365-evm.c | 2 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 2 +-
arch/arm/mach-davinci/board-mityomapl138.c | 2 +-
arch/arm/mach-davinci/board-neuros-osd2.c | 2 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +-
arch/arm/mach-s3c24xx/common-smdk.c | 2 +-
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-bast.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-qt2410.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 2 +-
arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
arch/arm/mach-s3c64xx/mach-hmt.c | 2 +-
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 +-
arch/arm/mach-s3c64xx/mach-real6410.c | 2 +-
drivers/mtd/nand/raw/ams-delta.c | 2 +-
drivers/mtd/nand/raw/arasan-nand-controller.c | 12 +--
drivers/mtd/nand/raw/atmel/nand-controller.c | 14 ++--
drivers/mtd/nand/raw/au1550nd.c | 2 +-
.../mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c | 3 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 +-
.../mtd/nand/raw/cadence-nand-controller.c | 4 +-
drivers/mtd/nand/raw/cafe_nand.c | 2 +-
drivers/mtd/nand/raw/cs553x_nand.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 24 +++---
drivers/mtd/nand/raw/denali.c | 2 +-
drivers/mtd/nand/raw/diskonchip.c | 2 +-
drivers/mtd/nand/raw/fsl_elbc_nand.c | 18 ++---
drivers/mtd/nand/raw/fsl_ifc_nand.c | 10 +--
drivers/mtd/nand/raw/fsl_upm.c | 2 +-
drivers/mtd/nand/raw/fsmc_nand.c | 12 +--
drivers/mtd/nand/raw/gpio.c | 2 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/nand/raw/hisi504_nand.c | 6 +-
.../mtd/nand/raw/ingenic/ingenic_nand_drv.c | 14 ++--
drivers/mtd/nand/raw/lpc32xx_mlc.c | 2 +-
drivers/mtd/nand/raw/lpc32xx_slc.c | 2 +-
drivers/mtd/nand/raw/marvell_nand.c | 17 ++--
drivers/mtd/nand/raw/meson_nand.c | 2 +-
drivers/mtd/nand/raw/mpc5121_nfc.c | 2 +-
drivers/mtd/nand/raw/mtk_nand.c | 6 +-
drivers/mtd/nand/raw/mxc_nand.c | 23 +++---
drivers/mtd/nand/raw/nand_base.c | 78 ++++++++++++-------
drivers/mtd/nand/raw/nand_micron.c | 4 +-
drivers/mtd/nand/raw/nand_toshiba.c | 3 +-
drivers/mtd/nand/raw/nandsim.c | 4 +-
drivers/mtd/nand/raw/ndfc.c | 2 +-
drivers/mtd/nand/raw/omap2.c | 20 ++---
drivers/mtd/nand/raw/orion_nand.c | 2 +-
drivers/mtd/nand/raw/pasemi_nand.c | 2 +-
drivers/mtd/nand/raw/plat_nand.c | 2 +-
drivers/mtd/nand/raw/qcom_nandc.c | 2 +-
drivers/mtd/nand/raw/r852.c | 2 +-
drivers/mtd/nand/raw/s3c2410.c | 18 ++---
drivers/mtd/nand/raw/sh_flctl.c | 4 +-
drivers/mtd/nand/raw/sharpsl.c | 2 +-
drivers/mtd/nand/raw/socrates_nand.c | 3 +-
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 9 ++-
drivers/mtd/nand/raw/sunxi_nand.c | 18 ++---
drivers/mtd/nand/raw/tango_nand.c | 2 +-
drivers/mtd/nand/raw/tegra_nand.c | 2 +-
drivers/mtd/nand/raw/tmio_nand.c | 2 +-
drivers/mtd/nand/raw/txx9ndfmc.c | 2 +-
drivers/mtd/nand/raw/vf610_nfc.c | 4 +-
drivers/mtd/nand/raw/xway_nand.c | 2 +-
include/linux/mtd/rawnand.h | 4 +-
include/linux/platform_data/mtd-davinci.h | 8 +-
.../linux/platform_data/mtd-nand-s3c2410.h | 2 +-
78 files changed, 238 insertions(+), 212 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index a273ab25c668..3b16a31da8b7 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -306,7 +306,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
.core_chipsel = 1,
.parts = da830_evm_nand_partitions,
.nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.bbt_td = &da830_evm_nand_bbt_main_descr,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 5b3549f1236c..6b96065c015a 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -239,7 +239,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = {
.core_chipsel = 1,
.parts = da850_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &da850_evm_nandflash_timing,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 5113273fda69..3c5a9e3c128a 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -82,7 +82,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 4c8a592754ac..e475b2113e70 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -76,7 +76,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_HW_ECC_ENGINE,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_placement = NAND_ECC_PLACEMENT_INTERLEAVED,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 2328b15ac067..bdf31eb77620 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -146,7 +146,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 3461d12bbfc0..457ed8dd57d8 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -162,7 +162,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
.core_chipsel = 0,
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 4600b617f9b4..0d55661e7a1f 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -91,7 +91,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_ale = 0x40000,
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.options = 0,
};
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index dfce421c0579..0c156fd18465 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -432,7 +432,7 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = {
.core_chipsel = 1,
.parts = mityomapl138_nandflash_partition,
.nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
.ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index ce99f782811a..cb1ff8edc73d 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -90,7 +90,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
.core_chipsel = 0,
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
};
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 5390a8630cf0..2c45ae392485 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -206,7 +206,7 @@ static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
.core_chipsel = 1,
.parts = omapl138_hawk_nandflash_partition,
.nr_parts = ARRAY_SIZE(omapl138_hawk_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 58e30cad386c..f845bd5ede54 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -166,7 +166,7 @@ static struct s3c2410_platform_nand smdk_nand_info = {
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(smdk_nand_sets),
.sets = smdk_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* devices we initialise */
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 072966dcad78..28326241e360 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -218,7 +218,7 @@ static struct s3c2410_platform_nand __initdata anubis_nand_info = {
.nr_sets = ARRAY_SIZE(anubis_nand_sets),
.sets = anubis_nand_sets,
.select_chip = anubis_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* IDE channels */
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 58c5ef3cf1d7..04dedebdb57c 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -109,7 +109,7 @@ static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
.sets = at2440evb_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* DM9000AEP 10/100 ethernet controller */
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index a7c3955ae8f6..6465eab0ab3a 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -294,7 +294,7 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = {
.nr_sets = ARRAY_SIZE(bast_nand_sets),
.sets = bast_nand_sets,
.select_chip = bast_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* DM9000 */
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 594901f3b8e5..db1b64f6e0a5 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -416,7 +416,7 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(gta02_nand_sets),
.sets = gta02_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 885e8f12e4b9..8233dcff19e7 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -228,7 +228,7 @@ static struct s3c2410_platform_nand __initdata jive_nand_info = {
.twrph1 = 40,
.sets = jive_nand_sets,
.nr_sets = ARRAY_SIZE(jive_nand_sets),
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static int __init jive_mtdset(char *options)
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 9035f868fb34..bd7c3ff675e3 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -296,7 +296,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
.nr_sets = ARRAY_SIZE(mini2440_nand_sets),
.sets = mini2440_nand_sets,
.ignore_unset_ecc = 1,
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
};
/* DM9000AEP 10/100 ethernet controller */
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index ee3630cb236a..157448827f61 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -234,7 +234,7 @@ static struct s3c2410_platform_nand __initdata osiris_nand_info = {
.nr_sets = ARRAY_SIZE(osiris_nand_sets),
.sets = osiris_nand_sets,
.select_chip = osiris_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* PCMCIA control and configuration */
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 5d48e5b6e738..16a05bf7cccb 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -281,7 +281,7 @@ static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(qt2410_nand_sets),
.sets = qt2410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* UDC */
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index fde98b175c75..5ecb42e8a028 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -620,7 +620,7 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
.sets = rx1950_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 529c6faf862f..a9408811dbdb 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -158,7 +158,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx3715_nand_sets),
.sets = rx3715_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *rx3715_devices[] __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index d76b28b65e65..c5fa215a527e 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -112,7 +112,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = {
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(vstms_nand_sets),
.sets = vstms_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *vstms_devices[] __initdata = {
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index e7080215c624..0d9acaf91701 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -199,7 +199,7 @@ static struct s3c2410_platform_nand hmt_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(hmt_nand_sets),
.sets = hmt_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct gpio_led hmt_leds[] = {
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 0dd36ae49e6a..6fbb57878746 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -136,7 +136,7 @@ static struct s3c2410_platform_nand mini6410_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(mini6410_nand_sets),
.sets = mini6410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 0ff88b6859c4..1e98e530a6aa 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -188,7 +188,7 @@ static struct s3c2410_platform_nand real6410_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(real6410_nand_sets),
.sets = real6410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *real6410_devices[] __initdata = {
diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 72a44b2411c1..bf7c73ede98f 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -260,7 +260,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
return err;
}
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, priv);
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index 076736351bc6..a0b5c539ca73 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -1056,17 +1056,17 @@ static int anfc_attach_chip(struct nand_chip *chip)
chip->ecc.read_page_raw = nand_monolithic_read_page_raw;
chip->ecc.write_page_raw = nand_monolithic_write_page_raw;
- switch (chip->ecc.mode) {
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
- case NAND_ECC_ON_DIE:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = anfc_init_hw_ecc_controller(nfc, chip);
break;
default:
dev_err(nfc->dev, "Unsupported ECC mode: %d\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -EINVAL;
}
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index d9839461e460..85cf396731ce 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1118,15 +1118,15 @@ static int atmel_nand_ecc_init(struct nand_chip *chip)
nc = to_nand_controller(chip->controller);
- switch (chip->ecc.mode) {
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
/*
* Nothing to do, the core will initialize everything for us.
*/
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = atmel_nand_pmecc_init(chip);
if (ret)
return ret;
@@ -1140,7 +1140,7 @@ static int atmel_nand_ecc_init(struct nand_chip *chip)
default:
/* Other modes are not supported. */
dev_err(nc->dev, "Unsupported ECC mode: %d\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -ENOTSUPP;
}
@@ -1155,7 +1155,7 @@ static int atmel_hsmc_nand_ecc_init(struct nand_chip *chip)
if (ret)
return ret;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
/* Adjust the ECC operations for the HSMC IP. */
@@ -1498,7 +1498,7 @@ static void atmel_nand_init(struct atmel_nand_controller *nc,
/* Default to HW ECC if pmecc is available. */
if (nc->pmecc)
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
}
static void atmel_smc_nand_init(struct atmel_nand_controller *nc,
diff --git a/drivers/mtd/nand/raw/au1550nd.c b/drivers/mtd/nand/raw/au1550nd.c
index ec2d90ad87de..79b057400fe9 100644
--- a/drivers/mtd/nand/raw/au1550nd.c
+++ b/drivers/mtd/nand/raw/au1550nd.c
@@ -294,7 +294,7 @@ static int au1550nd_probe(struct platform_device *pdev)
nand_controller_init(&ctx->controller);
ctx->controller.ops = &au1550nd_ops;
this->controller = &ctx->controller;
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (pd->devwidth)
diff --git a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
index 591775173034..8bb17c5a66c3 100644
--- a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
+++ b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
@@ -391,7 +391,8 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
nand_chip->legacy.chip_delay = 50;
b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
- b47n->nand_chip.ecc.mode = NAND_ECC_NONE; /* TODO: implement ECC */
+ /* TODO: implement ECC */
+ b47n->nand_chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_NONE;
/* Enable NAND flash access */
bcma_cc_set32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 2a9f2ff89fe7..164617b33942 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2539,9 +2539,9 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
cfg->col_adr_bytes = 2;
cfg->blk_adr_bytes = get_blk_adr_bytes(mtd->size, mtd->writesize);
- if (chip->ecc.mode != NAND_ECC_HW) {
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
dev_err(ctrl->dev, "only HW ECC supported; selected: %d\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -EINVAL;
}
@@ -2561,7 +2561,7 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
return -EINVAL;
}
- if (chip->ecc.mode != NAND_ECC_NONE &&
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!chip->ecc.size || !chip->ecc.strength)) {
if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
/* use detected ECC parameters */
@@ -2702,7 +2702,7 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
chip->legacy.read_buf = brcmnand_read_buf;
chip->legacy.write_buf = brcmnand_write_buf;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.read_page = brcmnand_read_page;
chip->ecc.write_page = brcmnand_write_page;
chip->ecc.read_page_raw = brcmnand_read_page_raw;
diff --git a/drivers/mtd/nand/raw/cadence-nand-controller.c b/drivers/mtd/nand/raw/cadence-nand-controller.c
index c405722adfe1..1bdec12f7893 100644
--- a/drivers/mtd/nand/raw/cadence-nand-controller.c
+++ b/drivers/mtd/nand/raw/cadence-nand-controller.c
@@ -2610,7 +2610,7 @@ static int cadence_nand_attach_chip(struct nand_chip *chip)
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->options |= NAND_NO_SUBPAGE_WRITE;
@@ -2756,7 +2756,7 @@ static int cadence_nand_chip_init(struct cdns_nand_ctrl *cdns_ctrl,
* Default to HW ECC engine mode. If the nand-ecc-mode property is given
* in the DT node, this entry will be overwritten in nand_scan_ident().
*/
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ret = nand_scan(chip, cdns_chip->nsels);
if (ret) {
diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index 2bf8ab542e38..2b94f385a1a8 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -629,7 +629,7 @@ static int cafe_nand_attach_chip(struct nand_chip *chip)
goto out_free_dma;
}
- cafe->nand.ecc.mode = NAND_ECC_HW;
+ cafe->nand.ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
cafe->nand.ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
cafe->nand.ecc.size = mtd->writesize;
cafe->nand.ecc.bytes = 14;
diff --git a/drivers/mtd/nand/raw/cs553x_nand.c b/drivers/mtd/nand/raw/cs553x_nand.c
index 9472bf798ed5..b7f3f6347761 100644
--- a/drivers/mtd/nand/raw/cs553x_nand.c
+++ b/drivers/mtd/nand/raw/cs553x_nand.c
@@ -286,7 +286,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
goto out_mtd;
}
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
this->ecc.size = 256;
this->ecc.bytes = 3;
this->ecc.hwctl = cs_enable_hwecc;
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 3640c7e45e15..58966a9706b1 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -530,11 +530,11 @@ static struct davinci_nand_pdata
if (!of_property_read_string(pdev->dev.of_node,
"ti,davinci-ecc-mode", &mode)) {
if (!strncmp("none", mode, 4))
- pdata->ecc_mode = NAND_ECC_NONE;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_NONE;
if (!strncmp("soft", mode, 4))
- pdata->ecc_mode = NAND_ECC_SOFT;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
if (!strncmp("hw", mode, 2))
- pdata->ecc_mode = NAND_ECC_HW;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
}
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-ecc-bits", &prop))
@@ -585,21 +585,21 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
if (IS_ERR(pdata))
return PTR_ERR(pdata);
- switch (info->chip.ecc.mode) {
- case NAND_ECC_NONE:
+ switch (info->chip.ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
pdata->ecc_bits = 0;
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
pdata->ecc_bits = 0;
/*
- * This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
- * avoid adding an extra ->ecc_algo field to
- * davinci_nand_pdata.
+ * This driver expects Hamming based ECC when engine_type is set
+ * to NAND_ECC_ENGINE_TYPE_SOFT. Force ecc.algo to
+ * NAND_ECC_ALGO_HAMMING to avoid adding an extra ->ecc_algo
+ * field to davinci_nand_pdata.
*/
info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
if (pdata->ecc_bits == 4) {
int chunks = mtd->writesize / 512;
@@ -850,7 +850,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
info->mask_cle = pdata->mask_cle ? : MASK_CLE;
/* Use board-specific ECC config */
- info->chip.ecc.mode = pdata->ecc_mode;
+ info->chip.ecc.engine_type = pdata->engine_type;
info->chip.ecc.placement = pdata->ecc_placement;
spin_lock_irq(&davinci_nand_lock);
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 514a97ea4450..a6a6464974ec 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1237,7 +1237,7 @@ int denali_chip_init(struct denali_controller *denali,
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
chip->options |= NAND_NO_SUBPAGE_WRITE;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.read_page = denali_read_page;
chip->ecc.write_page = denali_write_page;
diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c
index 40360352136b..94432a453e5e 100644
--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1456,7 +1456,7 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.calculate = doc200x_calculate_ecc;
nand->ecc.correct = doc200x_correct_data;
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index da89389faaae..b2af7f81fdf8 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -244,7 +244,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
return -EIO;
}
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
elbc_fcm_ctrl->max_bitflips = 0;
@@ -727,12 +727,12 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
unsigned int al;
- switch (chip->ecc.mode) {
+ switch (chip->ecc.engine_type) {
/*
* if ECC was not chosen in DT, decide whether to use HW or SW ECC from
* CS Base Register
*/
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
/* If CS Base Register selects full hardware ECC then use it */
if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
BR_DECC_CHK_GEN) {
@@ -740,23 +740,23 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
chip->ecc.write_page = fsl_elbc_write_page;
chip->ecc.write_subpage = fsl_elbc_write_subpage;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
} else {
/* otherwise fall back to default software ECC */
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
break;
/* if SW ECC was chosen in DT, we do not need to set anything here */
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
break;
- /* should we also implement NAND_ECC_HW to do as the code above? */
+ /* should we also implement *_ECC_ENGINE_CONTROLLER to do as above? */
default:
return -EINVAL;
}
@@ -786,8 +786,8 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
chip->page_shift);
dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
chip->phys_erase_shift);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
- chip->ecc.mode);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.engine_type = %d\n",
+ chip->ecc.engine_type);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
chip->ecc.steps);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index b2ae759dd14e..0e7a9b64301e 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -309,7 +309,7 @@ static void fsl_ifc_cmdfunc(struct nand_chip *chip, unsigned int command,
ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
ifc_nand_ctrl->index += column;
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
ifc_nand_ctrl->eccread = 1;
fsl_ifc_do_read(chip, 0, mtd);
@@ -724,8 +724,8 @@ static int fsl_ifc_attach_chip(struct nand_chip *chip)
chip->page_shift);
dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__,
chip->phys_erase_shift);
- dev_dbg(priv->dev, "%s: nand->ecc.mode = %d\n", __func__,
- chip->ecc.mode);
+ dev_dbg(priv->dev, "%s: nand->ecc.engine_type = %d\n", __func__,
+ chip->ecc.engine_type);
dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__,
chip->ecc.steps);
dev_dbg(priv->dev, "%s: nand->ecc.bytes = %d\n", __func__,
@@ -912,7 +912,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
if (csor & CSOR_NAND_ECC_DEC_EN) {
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops);
/* Hardware generates ECC per 512 Bytes */
@@ -925,7 +925,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->ecc.strength = 8;
}
} else {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
diff --git a/drivers/mtd/nand/raw/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c
index 49592b7e03a3..fc5a9df27cf1 100644
--- a/drivers/mtd/nand/raw/fsl_upm.c
+++ b/drivers/mtd/nand/raw/fsl_upm.c
@@ -163,7 +163,7 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
fun->chip.legacy.read_byte = fun_read_byte;
fun->chip.legacy.read_buf = fun_read_buf;
fun->chip.legacy.write_buf = fun_write_buf;
- fun->chip.ecc.mode = NAND_ECC_SOFT;
+ fun->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
fun->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
if (fun->mchip_count > 1)
fun->chip.legacy.select_chip = fun_select_chip;
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index ced570987e85..fd2926d6f5b2 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -900,8 +900,8 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
return 0;
}
- switch (nand->ecc.mode) {
- case NAND_ECC_HW:
+ switch (nand->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
dev_info(host->dev, "Using 1-bit HW ECC scheme\n");
nand->ecc.calculate = fsmc_read_hwecc_ecc1;
nand->ecc.correct = nand_correct_data;
@@ -910,14 +910,14 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
nand->ecc.options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
if (nand->ecc.algo == NAND_ECC_ALGO_BCH) {
dev_info(host->dev,
"Using 4-bit SW BCH ECC scheme\n");
break;
}
- case NAND_ECC_ON_DIE:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
break;
default:
@@ -929,7 +929,7 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
* Don't set layout for BCH4 SW ECC. This will be
* generated later in nand_bch_init() later.
*/
- if (nand->ecc.mode == NAND_ECC_HW) {
+ if (nand->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
switch (mtd->oobsize) {
case 16:
case 64:
@@ -1059,7 +1059,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
* Setup default ECC mode. nand_dt_init() called from nand_scan_ident()
* can overwrite this value if the DT provides a different value.
*/
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.hwctl = fsmc_enable_hwecc;
nand->ecc.size = 512;
nand->badblockbits = 7;
diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/gpio.c
index 667807c7100b..13645a8157a8 100644
--- a/drivers/mtd/nand/raw/gpio.c
+++ b/drivers/mtd/nand/raw/gpio.c
@@ -275,7 +275,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
nand_set_flash_node(chip, pdev->dev.of_node);
chip->legacy.IO_ADDR_W = chip->legacy.IO_ADDR_R;
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
chip->options = gpiomtd->plat.options;
chip->legacy.chip_delay = gpiomtd->plat.chip_delay;
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 061a8ddda275..d1ea6df9fd64 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -2032,7 +2032,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
ecc->write_page_raw = gpmi_ecc_write_page_raw;
ecc->read_oob_raw = gpmi_ecc_read_oob_raw;
ecc->write_oob_raw = gpmi_ecc_write_oob_raw;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ecc->size = bch_geo->ecc_chunk_size;
ecc->strength = bch_geo->ecc_strength;
mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops);
diff --git a/drivers/mtd/nand/raw/hisi504_nand.c b/drivers/mtd/nand/raw/hisi504_nand.c
index b84238e2268a..8b2122ce6ec3 100644
--- a/drivers/mtd/nand/raw/hisi504_nand.c
+++ b/drivers/mtd/nand/raw/hisi504_nand.c
@@ -186,7 +186,7 @@ static void hisi_nfc_dma_transfer(struct hinfc_host *host, int todev)
hinfc_write(host, host->dma_buffer, HINFC504_DMA_ADDR_DATA);
hinfc_write(host, host->dma_oob, HINFC504_DMA_ADDR_OOB);
- if (chip->ecc.mode == NAND_ECC_NONE) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
hinfc_write(host, ((mtd->oobsize & HINFC504_DMA_LEN_OOB_MASK)
<< HINFC504_DMA_LEN_OOB_SHIFT), HINFC504_DMA_LEN);
@@ -468,7 +468,7 @@ static void hisi_nfc_cmdfunc(struct nand_chip *chip, unsigned command,
case NAND_CMD_STATUS:
flag = hinfc_read(host, HINFC504_CON);
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
hinfc_write(host,
flag & ~(HINFC504_CON_ECCTYPE_MASK <<
HINFC504_CON_ECCTYPE_SHIFT), HINFC504_CON);
@@ -721,7 +721,7 @@ static int hisi_nfc_attach_chip(struct nand_chip *chip)
}
hinfc_write(host, flag, HINFC504_CON);
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
hisi_nfc_ecc_probe(host);
return 0;
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
index 69423bb29adb..70309f18124c 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -194,8 +194,8 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
(chip->ecc.strength / 8);
}
- switch (chip->ecc.mode) {
- case NAND_ECC_HW:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
if (!nfc->ecc) {
dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
return -ENODEV;
@@ -205,22 +205,22 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
chip->ecc.calculate = ingenic_nand_ecc_calculate;
chip->ecc.correct = ingenic_nand_ecc_correct;
fallthrough;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
(nfc->ecc) ? "hardware ECC" : "software ECC",
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
break;
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
dev_info(nfc->dev, "not using ECC\n");
break;
default:
dev_err(nfc->dev, "ECC mode %d not supported\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -EINVAL;
}
/* The NAND core will generate the ECC layout for SW ECC */
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
@@ -404,7 +404,7 @@ static int ingenic_nand_init_chip(struct platform_device *pdev,
mtd->dev.parent = dev;
chip->options = NAND_NO_SUBPAGE_WRITE;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->controller = &nfc->controller;
nand_set_flash_node(chip, np);
diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c
index 7521038af2ef..4940bb2e3c07 100644
--- a/drivers/mtd/nand/raw/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c
@@ -656,7 +656,7 @@ static int lpc32xx_nand_attach_chip(struct nand_chip *chip)
if (!host->dummy_buf)
return -ENOMEM;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
host->mlcsubpages = mtd->writesize / 512;
diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index ccb189c8e343..6db9d2ed6881 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -881,7 +881,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
/* NAND callbacks for LPC32xx SLC hardware */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->legacy.read_byte = lpc32xx_nand_read_byte;
chip->legacy.read_buf = lpc32xx_nand_read_buf;
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 3969cca7d925..f9cc03c11deb 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2247,7 +2247,8 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
int ret;
- if (ecc->mode != NAND_ECC_NONE && (!ecc->size || !ecc->strength)) {
+ if (ecc->engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
+ (!ecc->size || !ecc->strength)) {
if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
ecc->size = chip->base.eccreq.step_size;
ecc->strength = chip->base.eccreq.strength;
@@ -2259,15 +2260,15 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
}
}
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = marvell_nand_hw_ecc_controller_init(mtd, ecc);
if (ret)
return ret;
break;
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
- case NAND_ECC_ON_DIE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
if (!nfc->caps->is_nfcv2 && mtd->writesize != SZ_512 &&
mtd->writesize != SZ_2K) {
dev_err(nfc->dev, "NFCv1 cannot write %d bytes pages\n",
@@ -2465,7 +2466,7 @@ static int marvell_nand_attach_chip(struct nand_chip *chip)
return ret;
}
- if (chip->ecc.mode == NAND_ECC_HW) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
/*
* Subpage write not available with hardware ECC, prohibit also
* subpage read as in userspace subpage access would still be
@@ -2640,7 +2641,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
* Default to HW ECC engine mode. If the nand-ecc-mode property is given
* in the DT node, this entry will be overwritten in nand_scan_ident().
*/
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
/*
* Save a reference value for timing registers before
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 3f376471f3f7..4d1f5c8da270 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1197,7 +1197,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand)
if (ret)
return -EINVAL;
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.write_page_raw = meson_nfc_write_page_raw;
nand->ecc.write_page = meson_nfc_write_page_hwecc;
nand->ecc.write_oob_raw = nand_write_oob_std;
diff --git a/drivers/mtd/nand/raw/mpc5121_nfc.c b/drivers/mtd/nand/raw/mpc5121_nfc.c
index a67eded226db..dfd0d3ed5ed0 100644
--- a/drivers/mtd/nand/raw/mpc5121_nfc.c
+++ b/drivers/mtd/nand/raw/mpc5121_nfc.c
@@ -688,7 +688,7 @@ static int mpc5121_nfc_probe(struct platform_device *op)
chip->legacy.set_features = nand_get_set_features_notsupp;
chip->legacy.get_features = nand_get_set_features_notsupp;
chip->bbt_options = NAND_BBT_USE_FLASH;
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Support external chip-select logic on ADS5121 board */
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index c1a6e31aabb8..a0294c9161dd 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1226,8 +1226,8 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
int free, ret;
/* support only ecc hw mode */
- if (nand->ecc.mode != NAND_ECC_HW) {
- dev_err(dev, "ecc.mode not supported\n");
+ if (nand->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
+ dev_err(dev, "ecc.engine_type not supported\n");
return -EINVAL;
}
@@ -1390,7 +1390,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
nand->legacy.cmd_ctrl = mtk_nfc_cmd_ctrl;
/* set default mode in case dt entry is missing */
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.write_subpage = mtk_nfc_write_subpage_hwecc;
nand->ecc.write_page_raw = mtk_nfc_write_page_raw;
diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index c2e9759cfba8..de3bd36f99e9 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -669,7 +669,7 @@ static void mxc_nand_enable_hwecc_v1_v2(struct nand_chip *chip, bool enable)
struct mxc_nand_host *host = nand_get_controller_data(chip);
uint16_t config1;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return;
config1 = readw(NFC_V1_V2_CONFIG1);
@@ -687,7 +687,7 @@ static void mxc_nand_enable_hwecc_v3(struct nand_chip *chip, bool enable)
struct mxc_nand_host *host = nand_get_controller_data(chip);
uint32_t config2;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return;
config2 = readl(NFC_V3_CONFIG2);
@@ -1117,7 +1117,8 @@ static void preset_v1(struct mtd_info *mtd)
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
uint16_t config1 = 0;
- if (nand_chip->ecc.mode == NAND_ECC_HW && mtd->writesize)
+ if (nand_chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST &&
+ mtd->writesize)
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
if (!host->devtype_data->irqpending_quirk)
@@ -1227,7 +1228,7 @@ static void preset_v2(struct mtd_info *mtd)
if (mtd->writesize) {
uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
- if (nand_chip->ecc.mode == NAND_ECC_HW)
+ if (nand_chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
host->eccsize = get_eccsize(mtd);
@@ -1303,7 +1304,7 @@ static void preset_v3(struct mtd_info *mtd)
}
if (mtd->writesize) {
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
config2 |= NFC_V3_CONFIG2_ECC_EN;
config2 |= NFC_V3_CONFIG2_PPB(
@@ -1680,8 +1681,8 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
struct mxc_nand_host *host = nand_get_controller_data(chip);
struct device *dev = mtd->dev.parent;
- switch (chip->ecc.mode) {
- case NAND_ECC_HW:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
chip->ecc.read_page = mxc_nand_read_page;
chip->ecc.read_page_raw = mxc_nand_read_page_raw;
chip->ecc.read_oob = mxc_nand_read_oob;
@@ -1690,7 +1691,7 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
chip->ecc.write_oob = mxc_nand_write_oob;
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
break;
default:
@@ -1728,7 +1729,7 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
*/
host->used_oobsize = min(mtd->oobsize, 218U);
- if (chip->ecc.mode == NAND_ECC_HW) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
if (is_imx21_nfc(host) || is_imx27_nfc(host))
chip->ecc.strength = 1;
else
@@ -1843,9 +1844,9 @@ static int mxcnd_probe(struct platform_device *pdev)
mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
if (host->pdata.hw_ecc) {
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
} else {
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 9de58c4c4443..2821c82b79ad 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5018,28 +5018,45 @@ static const char * const nand_ecc_modes[] = {
[NAND_ECC_ON_DIE] = "on-die",
};
-static int of_get_nand_ecc_mode(struct device_node *np)
+static enum nand_ecc_engine_type
+of_get_nand_ecc_engine_type(struct device_node *np)
{
+ enum nand_ecc_mode eng_type;
const char *pm;
- int err, i;
+ int err;
err = of_property_read_string(np, "nand-ecc-mode", &pm);
- if (err < 0)
- return err;
+ if (err)
+ return NAND_ECC_ENGINE_TYPE_INVALID;
- for (i = NAND_ECC_NONE; i < ARRAY_SIZE(nand_ecc_modes); i++)
- if (!strcasecmp(pm, nand_ecc_modes[i]))
- return i;
+ for (eng_type = NAND_ECC_NONE;
+ eng_type < ARRAY_SIZE(nand_ecc_modes); eng_type++) {
+ if (!strcasecmp(pm, nand_ecc_modes[eng_type])) {
+ switch (eng_type) {
+ case NAND_ECC_NONE:
+ return NAND_ECC_ENGINE_TYPE_NONE;
+ case NAND_ECC_SOFT:
+ return NAND_ECC_ENGINE_TYPE_SOFT;
+ case NAND_ECC_HW:
+ case NAND_ECC_HW_SYNDROME:
+ return NAND_ECC_ENGINE_TYPE_ON_HOST;
+ case NAND_ECC_ON_DIE:
+ return NAND_ECC_ENGINE_TYPE_ON_DIE;
+ default:
+ break;
+ }
+ }
+ }
/*
* For backward compatibility we support few obsoleted values that don't
- * have their mappings into the nand_ecc_mode enum anymore (they were
- * merged with other enums).
+ * have their mappings into the nand_ecc_engine_providers enum anymore
+ * (they were merged with other enums).
*/
if (!strcasecmp(pm, "soft_bch"))
- return NAND_ECC_SOFT;
+ return NAND_ECC_ENGINE_TYPE_SOFT;
- return -ENODEV;
+ return NAND_ECC_ENGINE_TYPE_INVALID;
}
static const char * const nand_ecc_algos[] = {
@@ -5121,8 +5138,9 @@ static bool of_get_nand_on_flash_bbt(struct device_node *np)
static int nand_dt_init(struct nand_chip *chip)
{
struct device_node *dn = nand_get_flash_node(chip);
+ enum nand_ecc_engine_type ecc_type;
enum nand_ecc_algo ecc_algo;
- int ecc_mode, ecc_strength, ecc_step;
+ int ecc_strength, ecc_step;
if (!dn)
return 0;
@@ -5136,13 +5154,13 @@ static int nand_dt_init(struct nand_chip *chip)
if (of_get_nand_on_flash_bbt(dn))
chip->bbt_options |= NAND_BBT_USE_FLASH;
- ecc_mode = of_get_nand_ecc_mode(dn);
+ ecc_type = of_get_nand_ecc_engine_type(dn);
ecc_algo = of_get_nand_ecc_algo(dn);
ecc_strength = of_get_nand_ecc_strength(dn);
ecc_step = of_get_nand_ecc_step_size(dn);
- if (ecc_mode >= 0)
- chip->ecc.mode = ecc_mode;
+ if (ecc_type != NAND_ECC_ENGINE_TYPE_INVALID)
+ chip->ecc.engine_type = ecc_type;
if (ecc_algo != NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = ecc_algo;
@@ -5264,7 +5282,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
- if (WARN_ON(ecc->mode != NAND_ECC_SOFT))
+ if (WARN_ON(ecc->engine_type != NAND_ECC_ENGINE_TYPE_SOFT))
return -EINVAL;
switch (ecc->algo) {
@@ -5729,7 +5747,8 @@ static int nand_scan_tail(struct nand_chip *chip)
* If no default placement scheme is given, select an appropriate one.
*/
if (!mtd->ooblayout &&
- !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_ALGO_BCH)) {
+ !(ecc->engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ ecc->algo == NAND_ECC_ALGO_BCH)) {
switch (mtd->oobsize) {
case 8:
case 16:
@@ -5747,7 +5766,7 @@ static int nand_scan_tail(struct nand_chip *chip)
* page with ECC layout when ->oobsize <= 128 for
* compatibility reasons.
*/
- if (ecc->mode == NAND_ECC_NONE) {
+ if (ecc->engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
mtd_set_ooblayout(mtd,
&nand_ooblayout_lp_ops);
break;
@@ -5765,8 +5784,9 @@ static int nand_scan_tail(struct nand_chip *chip)
* selected and we have 256 byte pagesize fallback to software ECC
*/
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
+
switch (ecc->placement) {
case NAND_ECC_PLACEMENT_UNKNOWN:
case NAND_ECC_PLACEMENT_OOB:
@@ -5823,7 +5843,7 @@ static int nand_scan_tail(struct nand_chip *chip)
}
pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
ecc->size, mtd->writesize);
- ecc->mode = NAND_ECC_SOFT;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
ecc->algo = NAND_ECC_ALGO_HAMMING;
break;
@@ -5835,7 +5855,7 @@ static int nand_scan_tail(struct nand_chip *chip)
}
fallthrough;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
ret = nand_set_ecc_soft_ops(chip);
if (ret) {
ret = -EINVAL;
@@ -5843,7 +5863,7 @@ static int nand_scan_tail(struct nand_chip *chip)
}
break;
- case NAND_ECC_ON_DIE:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
if (!ecc->read_page || !ecc->write_page) {
WARN(1, "No ECC functions supplied; on-die ECC not possible\n");
ret = -EINVAL;
@@ -5855,8 +5875,8 @@ static int nand_scan_tail(struct nand_chip *chip)
ecc->write_oob = nand_write_oob_std;
break;
- case NAND_ECC_NONE:
- pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ pr_warn("NAND_ECC_ENGINE_TYPE_NONE selected by board driver. This is not recommended!\n");
ecc->read_page = nand_read_page_raw;
ecc->write_page = nand_write_page_raw;
ecc->read_oob = nand_read_oob_std;
@@ -5869,7 +5889,7 @@ static int nand_scan_tail(struct nand_chip *chip)
break;
default:
- WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode);
+ WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->engine_type);
ret = -EINVAL;
goto err_nand_manuf_cleanup;
}
@@ -5946,8 +5966,8 @@ static int nand_scan_tail(struct nand_chip *chip)
chip->pagecache.page = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
- switch (ecc->mode) {
- case NAND_ECC_SOFT:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_SOFT:
if (chip->page_shift > 9)
chip->options |= NAND_SUBPAGE_READ;
break;
@@ -6089,7 +6109,7 @@ EXPORT_SYMBOL(nand_scan_with_ids);
*/
void nand_cleanup(struct nand_chip *chip)
{
- if (chip->ecc.mode == NAND_ECC_SOFT &&
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
chip->ecc.algo == NAND_ECC_ALGO_BCH)
nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index a43b4d17bc69..c8ebfd8c77a1 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -497,13 +497,13 @@ static int micron_nand_init(struct nand_chip *chip)
ondie = micron_supports_on_die_ecc(chip);
if (ondie == MICRON_ON_DIE_MANDATORY &&
- chip->ecc.mode != NAND_ECC_ON_DIE) {
+ chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_DIE) {
pr_err("On-die ECC forcefully enabled, not supported\n");
ret = -EINVAL;
goto err_free_manuf_data;
}
- if (chip->ecc.mode == NAND_ECC_ON_DIE) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE) {
if (ondie == MICRON_ON_DIE_UNSUPPORTED) {
pr_err("On-die ECC selected but not supported\n");
ret = -EINVAL;
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index ae069905d7e4..436ed90a90ad 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -211,7 +211,8 @@ static int toshiba_nand_init(struct nand_chip *chip)
chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
/* Check that chip is BENAND and ECC mode is on-die */
- if (nand_is_slc(chip) && chip->ecc.mode == NAND_ECC_ON_DIE &&
+ if (nand_is_slc(chip) &&
+ chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE &&
chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND)
toshiba_nand_benand_init(chip);
diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index 9bcf1b9d4987..9c2115fe2111 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2234,7 +2234,7 @@ static int ns_attach_chip(struct nand_chip *chip)
return -EINVAL;
}
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.size = 512;
chip->ecc.strength = bch;
@@ -2274,7 +2274,7 @@ static int __init ns_init_module(void)
nsmtd = nand_to_mtd(chip);
nand_set_controller_data(chip, (void *)ns);
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
/* and 'badblocks' parameters to work */
diff --git a/drivers/mtd/nand/raw/ndfc.c b/drivers/mtd/nand/raw/ndfc.c
index ed38338c1383..0fb4ba93c41e 100644
--- a/drivers/mtd/nand/raw/ndfc.c
+++ b/drivers/mtd/nand/raw/ndfc.c
@@ -149,7 +149,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
chip->ecc.correct = nand_correct_data;
chip->ecc.hwctl = ndfc_enable_hwecc;
chip->ecc.calculate = ndfc_calculate_ecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 256;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index 967ddbda1c48..512f60780a50 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -884,8 +884,8 @@ static int omap_correct_data(struct nand_chip *chip, u_char *dat,
int stat = 0;
/* Ex NAND_ECC_HW12_2048 */
- if ((info->nand.ecc.mode == NAND_ECC_HW) &&
- (info->nand.ecc.size == 2048))
+ if (info->nand.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST &&
+ info->nand.ecc.size == 2048)
blockCnt = 4;
else
blockCnt = 1;
@@ -2006,11 +2006,11 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
return -EINVAL;
/*
- * Bail out earlier to let NAND_ECC_SOFT code create its own
+ * Bail out earlier to let NAND_ECC_ENGINE_TYPE_SOFT code create its own
* ooblayout instead of using ours.
*/
if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
}
@@ -2019,7 +2019,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
switch (info->ecc_opt) {
case OMAP_ECC_HAM1_CODE_HW:
dev_info(dev, "nand: using OMAP_ECC_HAM1_CODE_HW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.bytes = 3;
chip->ecc.size = 512;
chip->ecc.strength = 1;
@@ -2036,7 +2036,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 7;
chip->ecc.strength = 4;
@@ -2056,7 +2056,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH4_CODE_HW:
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
/* 14th bit is kept reserved for ROM-code compatibility */
chip->ecc.bytes = 7 + 1;
@@ -2078,7 +2078,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 13;
chip->ecc.strength = 8;
@@ -2098,7 +2098,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH8_CODE_HW:
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
/* 14th bit is kept reserved for ROM-code compatibility */
chip->ecc.bytes = 13 + 1;
@@ -2121,7 +2121,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH16_CODE_HW:
pr_info("Using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 26;
chip->ecc.strength = 16;
diff --git a/drivers/mtd/nand/raw/orion_nand.c b/drivers/mtd/nand/raw/orion_nand.c
index 7a5cfa3d883f..df9c0f8e4b4e 100644
--- a/drivers/mtd/nand/raw/orion_nand.c
+++ b/drivers/mtd/nand/raw/orion_nand.c
@@ -139,7 +139,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
nc->legacy.IO_ADDR_R = nc->legacy.IO_ADDR_W = io_base;
nc->legacy.cmd_ctrl = orion_nand_cmd_ctrl;
nc->legacy.read_buf = orion_nand_read_buf;
- nc->ecc.mode = NAND_ECC_SOFT;
+ nc->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
nc->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (board->chip_delay)
diff --git a/drivers/mtd/nand/raw/pasemi_nand.c b/drivers/mtd/nand/raw/pasemi_nand.c
index 3eddc284614d..155e8c8f61e2 100644
--- a/drivers/mtd/nand/raw/pasemi_nand.c
+++ b/drivers/mtd/nand/raw/pasemi_nand.c
@@ -132,7 +132,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
chip->legacy.read_buf = pasemi_read_buf;
chip->legacy.write_buf = pasemi_write_buf;
chip->legacy.chip_delay = 0;
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Enable the following for a flash based bad block table */
diff --git a/drivers/mtd/nand/raw/plat_nand.c b/drivers/mtd/nand/raw/plat_nand.c
index dbc089c8872f..b98c0d5c413f 100644
--- a/drivers/mtd/nand/raw/plat_nand.c
+++ b/drivers/mtd/nand/raw/plat_nand.c
@@ -66,7 +66,7 @@ static int plat_nand_probe(struct platform_device *pdev)
data->chip.options |= pdata->chip.options;
data->chip.bbt_options |= pdata->chip.bbt_options;
- data->chip.ecc.mode = NAND_ECC_SOFT;
+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index f1daf330951b..0a05674b3ab5 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2548,7 +2548,7 @@ static int qcom_nand_attach_chip(struct nand_chip *chip)
ecc->write_page_raw = qcom_nandc_write_page_raw;
ecc->write_oob = qcom_nandc_write_oob;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
diff --git a/drivers/mtd/nand/raw/r852.c b/drivers/mtd/nand/raw/r852.c
index f0988cda4479..6b7addd2c420 100644
--- a/drivers/mtd/nand/raw/r852.c
+++ b/drivers/mtd/nand/raw/r852.c
@@ -859,7 +859,7 @@ static int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
chip->legacy.write_buf = r852_write_buf;
/* ecc */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.size = R852_DMA_LEN;
chip->ecc.bytes = SM_OOB_SIZE;
diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
index dfe5a0f07385..88301fd29729 100644
--- a/drivers/mtd/nand/raw/s3c2410.c
+++ b/drivers/mtd/nand/raw/s3c2410.c
@@ -904,7 +904,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
nmtd->info = info;
nmtd->set = set;
- chip->ecc.mode = info->platform->ecc_mode;
+ chip->ecc.engine_type = info->platform->engine_type;
/*
* If you use u-boot BBT creation code, specifying this flag will
@@ -929,24 +929,24 @@ static int s3c2410_nand_attach_chip(struct nand_chip *chip)
struct mtd_info *mtd = nand_to_mtd(chip);
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
- switch (chip->ecc.mode) {
+ switch (chip->ecc.engine_type) {
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
dev_info(info->device, "ECC disabled\n");
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
/*
- * This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
- * avoid adding an extra ecc_algo field to
- * s3c2410_platform_nand.
+ * This driver expects Hamming based ECC when engine_type is set
+ * to NAND_ECC_ENGINE_TYPE_SOFT. Force ecc.algo to
+ * NAND_ECC_ALGO_HAMMING to avoid adding an extra ecc_algo field
+ * to s3c2410_platform_nand.
*/
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
dev_info(info->device, "soft ECC\n");
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
chip->ecc.calculate = s3c2410_nand_calculate_ecc;
chip->ecc.correct = s3c2410_nand_correct_data;
chip->ecc.strength = 1;
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index 9dbd6fdbe264..13df4bdf792a 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -1039,12 +1039,12 @@ static int flctl_chip_attach_chip(struct nand_chip *chip)
chip->ecc.strength = 4;
chip->ecc.read_page = flctl_read_page_hwecc;
chip->ecc.write_page = flctl_write_page_hwecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
/* 4 symbols ECC enabled */
flctl->flcmncr_base |= _4ECCEN;
} else {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
diff --git a/drivers/mtd/nand/raw/sharpsl.c b/drivers/mtd/nand/raw/sharpsl.c
index 51286f7acf54..1327bfb3d5d3 100644
--- a/drivers/mtd/nand/raw/sharpsl.c
+++ b/drivers/mtd/nand/raw/sharpsl.c
@@ -157,7 +157,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
/* 15 us command delay time */
this->legacy.chip_delay = 15;
/* set eccmode using hardware ECC */
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
this->ecc.size = 256;
this->ecc.bytes = 3;
this->ecc.strength = 1;
diff --git a/drivers/mtd/nand/raw/socrates_nand.c b/drivers/mtd/nand/raw/socrates_nand.c
index 72a3a7f98282..0f63ff6f7fe7 100644
--- a/drivers/mtd/nand/raw/socrates_nand.c
+++ b/drivers/mtd/nand/raw/socrates_nand.c
@@ -153,7 +153,8 @@ static int socrates_nand_probe(struct platform_device *ofdev)
nand_chip->legacy.read_buf = socrates_nand_read_buf;
nand_chip->legacy.dev_ready = socrates_nand_device_ready;
- nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
+ /* enable ECC */
+ nand_chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
nand_chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* TODO: I have no idea what real delay is. */
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 65c9d17b25a3..d4f016d9251f 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1725,14 +1725,15 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip)
int ret;
/*
- * Only NAND_ECC_HW mode is actually supported
+ * Only NAND_ECC_ENGINE_TYPE_ON_HOST mode is actually supported
* Hamming => ecc.strength = 1
* BCH4 => ecc.strength = 4
* BCH8 => ecc.strength = 8
* ECC sector size = 512
*/
- if (chip->ecc.mode != NAND_ECC_HW) {
- dev_err(nfc->dev, "nand_ecc_mode is not well defined in the DT\n");
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
+ dev_err(nfc->dev,
+ "nand_ecc_engine_type is not well defined in the DT\n");
return -EINVAL;
}
@@ -1942,7 +1943,7 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
NAND_USES_DMA;
/* Default ECC settings */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = FMC2_ECC_STEP_SIZE;
chip->ecc.strength = FMC2_ECC_BCH8;
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index ffbc1651fadc..c6dd2e6d9ef8 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1575,7 +1575,7 @@ static int sunxi_nand_ooblayout_free(struct mtd_info *mtd, int section,
* only have 2 bytes available in the first user data
* section.
*/
- if (!section && ecc->mode == NAND_ECC_HW) {
+ if (!section && ecc->engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
oobregion->offset = 2;
oobregion->length = 2;
@@ -1720,11 +1720,11 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
{
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
sunxi_nand_hw_ecc_ctrl_cleanup(ecc);
break;
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
default:
break;
}
@@ -1752,14 +1752,14 @@ static int sunxi_nand_attach_chip(struct nand_chip *nand)
if (!ecc->size || !ecc->strength)
return -EINVAL;
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = sunxi_nand_hw_ecc_ctrl_init(nand, ecc, np);
if (ret)
return ret;
break;
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
break;
default:
return -EINVAL;
@@ -1991,7 +1991,7 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
* Set the ECC mode to the default value in case nothing is specified
* in the DT.
*/
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand_set_flash_node(nand, np);
mtd = nand_to_mtd(nand);
diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c
index 2154b6f860dd..b0872b9cd768 100644
--- a/drivers/mtd/nand/raw/tango_nand.c
+++ b/drivers/mtd/nand/raw/tango_nand.c
@@ -511,7 +511,7 @@ static int tango_attach_chip(struct nand_chip *chip)
{
struct nand_ecc_ctrl *ecc = &chip->ecc;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ecc->algo = NAND_ECC_ALGO_BCH;
ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index e2e13effc8a6..2325b06ccc9a 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -916,7 +916,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (chip->bbt_options & NAND_BBT_USE_FLASH)
chip->bbt_options |= NAND_BBT_NO_OOB;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.steps = mtd->writesize / chip->ecc.size;
if (chip->base.eccreq.step_size != 512) {
diff --git a/drivers/mtd/nand/raw/tmio_nand.c b/drivers/mtd/nand/raw/tmio_nand.c
index 843a8683b737..235a2f7b1bad 100644
--- a/drivers/mtd/nand/raw/tmio_nand.c
+++ b/drivers/mtd/nand/raw/tmio_nand.c
@@ -410,7 +410,7 @@ static int tmio_probe(struct platform_device *dev)
nand_chip->legacy.read_buf = tmio_nand_read_buf;
/* set eccmode using hardware ECC */
- nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand_chip->ecc.size = 512;
nand_chip->ecc.bytes = 6;
nand_chip->ecc.strength = 2;
diff --git a/drivers/mtd/nand/raw/txx9ndfmc.c b/drivers/mtd/nand/raw/txx9ndfmc.c
index 47d966871445..ef81dce6b5c4 100644
--- a/drivers/mtd/nand/raw/txx9ndfmc.c
+++ b/drivers/mtd/nand/raw/txx9ndfmc.c
@@ -329,7 +329,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
chip->ecc.calculate = txx9ndfmc_calculate_ecc;
chip->ecc.correct = txx9ndfmc_correct_data;
chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.strength = 1;
chip->legacy.chip_delay = 100;
chip->controller = &drvdata->controller;
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index 7248c5901183..8ee2c1f539c4 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -732,7 +732,7 @@ static void vf610_nfc_init_controller(struct vf610_nfc *nfc)
else
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
- if (nfc->chip.ecc.mode == NAND_ECC_HW) {
+ if (nfc->chip.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
/* Set ECC status offset in SRAM */
vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
CONFIG_ECC_SRAM_ADDR_MASK,
@@ -761,7 +761,7 @@ static int vf610_nfc_attach_chip(struct nand_chip *chip)
return -ENXIO;
}
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
diff --git a/drivers/mtd/nand/raw/xway_nand.c b/drivers/mtd/nand/raw/xway_nand.c
index 909072e82a68..3332c9aa462a 100644
--- a/drivers/mtd/nand/raw/xway_nand.c
+++ b/drivers/mtd/nand/raw/xway_nand.c
@@ -180,7 +180,7 @@ static int xway_nand_probe(struct platform_device *pdev)
data->chip.legacy.read_byte = xway_read_byte;
data->chip.legacy.chip_delay = 30;
- data->chip.ecc.mode = NAND_ECC_SOFT;
+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 63aa061427bb..8f7f1cce3b4b 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -303,7 +303,7 @@ static const struct nand_ecc_caps __name = { \
/**
* struct nand_ecc_ctrl - Control structure for ECC
- * @mode: ECC mode
+ * @engine_type: ECC engine type
* @placement: OOB bytes placement
* @algo: ECC algorithm
* @steps: number of ECC steps per page
@@ -356,7 +356,7 @@ static const struct nand_ecc_caps __name = { \
* @write_oob: function to write chip OOB data
*/
struct nand_ecc_ctrl {
- enum nand_ecc_mode mode;
+ enum nand_ecc_engine_type engine_type;
enum nand_ecc_placement placement;
enum nand_ecc_algo algo;
int steps;
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h
index 6e2b252a4ce6..dd474dd44848 100644
--- a/include/linux/platform_data/mtd-davinci.h
+++ b/include/linux/platform_data/mtd-davinci.h
@@ -60,15 +60,15 @@ struct davinci_nand_pdata { /* platform_data */
struct mtd_partition *parts;
unsigned nr_parts;
- /* none == NAND_ECC_NONE (strongly *not* advised!!)
- * soft == NAND_ECC_SOFT
- * else == NAND_ECC_HW, according to ecc_bits
+ /* none == NAND_ECC_ENGINE_TYPE_NONE (strongly *not* advised!!)
+ * soft == NAND_ECC_ENGINE_TYPE_SOFT
+ * else == NAND_ECC_ENGINE_TYPE_ON_HOST, according to ecc_bits
*
* All DaVinci-family chips support 1-bit hardware ECC.
* Newer ones also support 4-bit ECC, but are awkward
* using it with large page chips.
*/
- enum nand_ecc_mode ecc_mode;
+ enum nand_ecc_engine_type engine_type;
enum nand_ecc_placement ecc_placement;
u8 ecc_bits;
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index 08675b16f9e1..25390fc3e795 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -49,7 +49,7 @@ struct s3c2410_platform_nand {
unsigned int ignore_unset_ecc:1;
- enum nand_ecc_mode ecc_mode;
+ enum nand_ecc_engine_type engine_type;
int nr_sets;
struct s3c2410_nand_set *sets;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 10/20] mtd: rawnand: Use the new ECC engine type enumeration
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Mechanical switch from the legacy "mode" enumeration to the new
"engine type" enumeration in drivers and board files.
The device tree parsing is also updated to return the new enumeration
from the old strings.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
---
arch/arm/mach-davinci/board-da830-evm.c | 2 +-
arch/arm/mach-davinci/board-da850-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-evm.c | 2 +-
arch/arm/mach-davinci/board-dm355-leopard.c | 2 +-
arch/arm/mach-davinci/board-dm365-evm.c | 2 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 2 +-
arch/arm/mach-davinci/board-mityomapl138.c | 2 +-
arch/arm/mach-davinci/board-neuros-osd2.c | 2 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 2 +-
arch/arm/mach-s3c24xx/common-smdk.c | 2 +-
arch/arm/mach-s3c24xx/mach-anubis.c | 2 +-
arch/arm/mach-s3c24xx/mach-at2440evb.c | 2 +-
arch/arm/mach-s3c24xx/mach-bast.c | 2 +-
arch/arm/mach-s3c24xx/mach-gta02.c | 2 +-
arch/arm/mach-s3c24xx/mach-jive.c | 2 +-
arch/arm/mach-s3c24xx/mach-mini2440.c | 2 +-
arch/arm/mach-s3c24xx/mach-osiris.c | 2 +-
arch/arm/mach-s3c24xx/mach-qt2410.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx1950.c | 2 +-
arch/arm/mach-s3c24xx/mach-rx3715.c | 2 +-
arch/arm/mach-s3c24xx/mach-vstms.c | 2 +-
arch/arm/mach-s3c64xx/mach-hmt.c | 2 +-
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 +-
arch/arm/mach-s3c64xx/mach-real6410.c | 2 +-
drivers/mtd/nand/raw/ams-delta.c | 2 +-
drivers/mtd/nand/raw/arasan-nand-controller.c | 12 +--
drivers/mtd/nand/raw/atmel/nand-controller.c | 14 ++--
drivers/mtd/nand/raw/au1550nd.c | 2 +-
.../mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c | 3 +-
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 +-
.../mtd/nand/raw/cadence-nand-controller.c | 4 +-
drivers/mtd/nand/raw/cafe_nand.c | 2 +-
drivers/mtd/nand/raw/cs553x_nand.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 24 +++---
drivers/mtd/nand/raw/denali.c | 2 +-
drivers/mtd/nand/raw/diskonchip.c | 2 +-
drivers/mtd/nand/raw/fsl_elbc_nand.c | 18 ++---
drivers/mtd/nand/raw/fsl_ifc_nand.c | 10 +--
drivers/mtd/nand/raw/fsl_upm.c | 2 +-
drivers/mtd/nand/raw/fsmc_nand.c | 12 +--
drivers/mtd/nand/raw/gpio.c | 2 +-
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2 +-
drivers/mtd/nand/raw/hisi504_nand.c | 6 +-
.../mtd/nand/raw/ingenic/ingenic_nand_drv.c | 14 ++--
drivers/mtd/nand/raw/lpc32xx_mlc.c | 2 +-
drivers/mtd/nand/raw/lpc32xx_slc.c | 2 +-
drivers/mtd/nand/raw/marvell_nand.c | 17 ++--
drivers/mtd/nand/raw/meson_nand.c | 2 +-
drivers/mtd/nand/raw/mpc5121_nfc.c | 2 +-
drivers/mtd/nand/raw/mtk_nand.c | 6 +-
drivers/mtd/nand/raw/mxc_nand.c | 23 +++---
drivers/mtd/nand/raw/nand_base.c | 78 ++++++++++++-------
drivers/mtd/nand/raw/nand_micron.c | 4 +-
drivers/mtd/nand/raw/nand_toshiba.c | 3 +-
drivers/mtd/nand/raw/nandsim.c | 4 +-
drivers/mtd/nand/raw/ndfc.c | 2 +-
drivers/mtd/nand/raw/omap2.c | 20 ++---
drivers/mtd/nand/raw/orion_nand.c | 2 +-
drivers/mtd/nand/raw/pasemi_nand.c | 2 +-
drivers/mtd/nand/raw/plat_nand.c | 2 +-
drivers/mtd/nand/raw/qcom_nandc.c | 2 +-
drivers/mtd/nand/raw/r852.c | 2 +-
drivers/mtd/nand/raw/s3c2410.c | 18 ++---
drivers/mtd/nand/raw/sh_flctl.c | 4 +-
drivers/mtd/nand/raw/sharpsl.c | 2 +-
drivers/mtd/nand/raw/socrates_nand.c | 3 +-
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 9 ++-
drivers/mtd/nand/raw/sunxi_nand.c | 18 ++---
drivers/mtd/nand/raw/tango_nand.c | 2 +-
drivers/mtd/nand/raw/tegra_nand.c | 2 +-
drivers/mtd/nand/raw/tmio_nand.c | 2 +-
drivers/mtd/nand/raw/txx9ndfmc.c | 2 +-
drivers/mtd/nand/raw/vf610_nfc.c | 4 +-
drivers/mtd/nand/raw/xway_nand.c | 2 +-
include/linux/mtd/rawnand.h | 4 +-
include/linux/platform_data/mtd-davinci.h | 8 +-
.../linux/platform_data/mtd-nand-s3c2410.h | 2 +-
78 files changed, 238 insertions(+), 212 deletions(-)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index a273ab25c668..3b16a31da8b7 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -306,7 +306,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
.core_chipsel = 1,
.parts = da830_evm_nand_partitions,
.nr_parts = ARRAY_SIZE(da830_evm_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.bbt_td = &da830_evm_nand_bbt_main_descr,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 5b3549f1236c..6b96065c015a 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -239,7 +239,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = {
.core_chipsel = 1,
.parts = da850_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &da850_evm_nandflash_timing,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 5113273fda69..3c5a9e3c128a 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -82,7 +82,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 4c8a592754ac..e475b2113e70 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -76,7 +76,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_HW_ECC_ENGINE,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_placement = NAND_ECC_PLACEMENT_INTERLEAVED,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 2328b15ac067..bdf31eb77620 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -146,7 +146,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_chipsel = BIT(14),
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.ecc_bits = 4,
};
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 3461d12bbfc0..457ed8dd57d8 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -162,7 +162,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
.core_chipsel = 0,
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
.timing = &davinci_evm_nandflash_timing,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 4600b617f9b4..0d55661e7a1f 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -91,7 +91,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
.mask_ale = 0x40000,
.parts = davinci_nand_partitions,
.nr_parts = ARRAY_SIZE(davinci_nand_partitions),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.options = 0,
};
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index dfce421c0579..0c156fd18465 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -432,7 +432,7 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = {
.core_chipsel = 1,
.parts = mityomapl138_nandflash_partition,
.nr_parts = ARRAY_SIZE(mityomapl138_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
.ecc_bits = 1, /* 4 bit mode is not supported with 16 bit NAND */
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index ce99f782811a..cb1ff8edc73d 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -90,7 +90,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
.core_chipsel = 0,
.parts = davinci_ntosd2_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 1,
.bbt_options = NAND_BBT_USE_FLASH,
};
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 5390a8630cf0..2c45ae392485 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -206,7 +206,7 @@ static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
.core_chipsel = 1,
.parts = omapl138_hawk_nandflash_partition,
.nr_parts = ARRAY_SIZE(omapl138_hawk_nandflash_partition),
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
.ecc_bits = 4,
.bbt_options = NAND_BBT_USE_FLASH,
.options = NAND_BUSWIDTH_16,
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 58e30cad386c..f845bd5ede54 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -166,7 +166,7 @@ static struct s3c2410_platform_nand smdk_nand_info = {
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(smdk_nand_sets),
.sets = smdk_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* devices we initialise */
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 072966dcad78..28326241e360 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -218,7 +218,7 @@ static struct s3c2410_platform_nand __initdata anubis_nand_info = {
.nr_sets = ARRAY_SIZE(anubis_nand_sets),
.sets = anubis_nand_sets,
.select_chip = anubis_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* IDE channels */
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 58c5ef3cf1d7..04dedebdb57c 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -109,7 +109,7 @@ static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(at2440evb_nand_sets),
.sets = at2440evb_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* DM9000AEP 10/100 ethernet controller */
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index a7c3955ae8f6..6465eab0ab3a 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -294,7 +294,7 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = {
.nr_sets = ARRAY_SIZE(bast_nand_sets),
.sets = bast_nand_sets,
.select_chip = bast_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* DM9000 */
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 594901f3b8e5..db1b64f6e0a5 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -416,7 +416,7 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(gta02_nand_sets),
.sets = gta02_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 885e8f12e4b9..8233dcff19e7 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -228,7 +228,7 @@ static struct s3c2410_platform_nand __initdata jive_nand_info = {
.twrph1 = 40,
.sets = jive_nand_sets,
.nr_sets = ARRAY_SIZE(jive_nand_sets),
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static int __init jive_mtdset(char *options)
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 9035f868fb34..bd7c3ff675e3 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -296,7 +296,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
.nr_sets = ARRAY_SIZE(mini2440_nand_sets),
.sets = mini2440_nand_sets,
.ignore_unset_ecc = 1,
- .ecc_mode = NAND_ECC_HW,
+ .engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST,
};
/* DM9000AEP 10/100 ethernet controller */
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index ee3630cb236a..157448827f61 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -234,7 +234,7 @@ static struct s3c2410_platform_nand __initdata osiris_nand_info = {
.nr_sets = ARRAY_SIZE(osiris_nand_sets),
.sets = osiris_nand_sets,
.select_chip = osiris_nand_select,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* PCMCIA control and configuration */
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 5d48e5b6e738..16a05bf7cccb 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -281,7 +281,7 @@ static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(qt2410_nand_sets),
.sets = qt2410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
/* UDC */
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index fde98b175c75..5ecb42e8a028 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -620,7 +620,7 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
.sets = rx1950_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 529c6faf862f..a9408811dbdb 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -158,7 +158,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(rx3715_nand_sets),
.sets = rx3715_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *rx3715_devices[] __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index d76b28b65e65..c5fa215a527e 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -112,7 +112,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = {
.twrph1 = 20,
.nr_sets = ARRAY_SIZE(vstms_nand_sets),
.sets = vstms_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *vstms_devices[] __initdata = {
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index e7080215c624..0d9acaf91701 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -199,7 +199,7 @@ static struct s3c2410_platform_nand hmt_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(hmt_nand_sets),
.sets = hmt_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct gpio_led hmt_leds[] = {
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 0dd36ae49e6a..6fbb57878746 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -136,7 +136,7 @@ static struct s3c2410_platform_nand mini6410_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(mini6410_nand_sets),
.sets = mini6410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 0ff88b6859c4..1e98e530a6aa 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -188,7 +188,7 @@ static struct s3c2410_platform_nand real6410_nand_info = {
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(real6410_nand_sets),
.sets = real6410_nand_sets,
- .ecc_mode = NAND_ECC_SOFT,
+ .engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *real6410_devices[] __initdata = {
diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 72a44b2411c1..bf7c73ede98f 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -260,7 +260,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
return err;
}
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, priv);
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index 076736351bc6..a0b5c539ca73 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -1056,17 +1056,17 @@ static int anfc_attach_chip(struct nand_chip *chip)
chip->ecc.read_page_raw = nand_monolithic_read_page_raw;
chip->ecc.write_page_raw = nand_monolithic_write_page_raw;
- switch (chip->ecc.mode) {
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
- case NAND_ECC_ON_DIE:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = anfc_init_hw_ecc_controller(nfc, chip);
break;
default:
dev_err(nfc->dev, "Unsupported ECC mode: %d\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -EINVAL;
}
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index d9839461e460..85cf396731ce 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1118,15 +1118,15 @@ static int atmel_nand_ecc_init(struct nand_chip *chip)
nc = to_nand_controller(chip->controller);
- switch (chip->ecc.mode) {
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
/*
* Nothing to do, the core will initialize everything for us.
*/
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = atmel_nand_pmecc_init(chip);
if (ret)
return ret;
@@ -1140,7 +1140,7 @@ static int atmel_nand_ecc_init(struct nand_chip *chip)
default:
/* Other modes are not supported. */
dev_err(nc->dev, "Unsupported ECC mode: %d\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -ENOTSUPP;
}
@@ -1155,7 +1155,7 @@ static int atmel_hsmc_nand_ecc_init(struct nand_chip *chip)
if (ret)
return ret;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
/* Adjust the ECC operations for the HSMC IP. */
@@ -1498,7 +1498,7 @@ static void atmel_nand_init(struct atmel_nand_controller *nc,
/* Default to HW ECC if pmecc is available. */
if (nc->pmecc)
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
}
static void atmel_smc_nand_init(struct atmel_nand_controller *nc,
diff --git a/drivers/mtd/nand/raw/au1550nd.c b/drivers/mtd/nand/raw/au1550nd.c
index ec2d90ad87de..79b057400fe9 100644
--- a/drivers/mtd/nand/raw/au1550nd.c
+++ b/drivers/mtd/nand/raw/au1550nd.c
@@ -294,7 +294,7 @@ static int au1550nd_probe(struct platform_device *pdev)
nand_controller_init(&ctx->controller);
ctx->controller.ops = &au1550nd_ops;
this->controller = &ctx->controller;
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (pd->devwidth)
diff --git a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
index 591775173034..8bb17c5a66c3 100644
--- a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
+++ b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
@@ -391,7 +391,8 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
nand_chip->legacy.chip_delay = 50;
b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
- b47n->nand_chip.ecc.mode = NAND_ECC_NONE; /* TODO: implement ECC */
+ /* TODO: implement ECC */
+ b47n->nand_chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_NONE;
/* Enable NAND flash access */
bcma_cc_set32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 2a9f2ff89fe7..164617b33942 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2539,9 +2539,9 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
cfg->col_adr_bytes = 2;
cfg->blk_adr_bytes = get_blk_adr_bytes(mtd->size, mtd->writesize);
- if (chip->ecc.mode != NAND_ECC_HW) {
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
dev_err(ctrl->dev, "only HW ECC supported; selected: %d\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -EINVAL;
}
@@ -2561,7 +2561,7 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
return -EINVAL;
}
- if (chip->ecc.mode != NAND_ECC_NONE &&
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!chip->ecc.size || !chip->ecc.strength)) {
if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
/* use detected ECC parameters */
@@ -2702,7 +2702,7 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
chip->legacy.read_buf = brcmnand_read_buf;
chip->legacy.write_buf = brcmnand_write_buf;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.read_page = brcmnand_read_page;
chip->ecc.write_page = brcmnand_write_page;
chip->ecc.read_page_raw = brcmnand_read_page_raw;
diff --git a/drivers/mtd/nand/raw/cadence-nand-controller.c b/drivers/mtd/nand/raw/cadence-nand-controller.c
index c405722adfe1..1bdec12f7893 100644
--- a/drivers/mtd/nand/raw/cadence-nand-controller.c
+++ b/drivers/mtd/nand/raw/cadence-nand-controller.c
@@ -2610,7 +2610,7 @@ static int cadence_nand_attach_chip(struct nand_chip *chip)
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->options |= NAND_NO_SUBPAGE_WRITE;
@@ -2756,7 +2756,7 @@ static int cadence_nand_chip_init(struct cdns_nand_ctrl *cdns_ctrl,
* Default to HW ECC engine mode. If the nand-ecc-mode property is given
* in the DT node, this entry will be overwritten in nand_scan_ident().
*/
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ret = nand_scan(chip, cdns_chip->nsels);
if (ret) {
diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index 2bf8ab542e38..2b94f385a1a8 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -629,7 +629,7 @@ static int cafe_nand_attach_chip(struct nand_chip *chip)
goto out_free_dma;
}
- cafe->nand.ecc.mode = NAND_ECC_HW;
+ cafe->nand.ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
cafe->nand.ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
cafe->nand.ecc.size = mtd->writesize;
cafe->nand.ecc.bytes = 14;
diff --git a/drivers/mtd/nand/raw/cs553x_nand.c b/drivers/mtd/nand/raw/cs553x_nand.c
index 9472bf798ed5..b7f3f6347761 100644
--- a/drivers/mtd/nand/raw/cs553x_nand.c
+++ b/drivers/mtd/nand/raw/cs553x_nand.c
@@ -286,7 +286,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
goto out_mtd;
}
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
this->ecc.size = 256;
this->ecc.bytes = 3;
this->ecc.hwctl = cs_enable_hwecc;
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 3640c7e45e15..58966a9706b1 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -530,11 +530,11 @@ static struct davinci_nand_pdata
if (!of_property_read_string(pdev->dev.of_node,
"ti,davinci-ecc-mode", &mode)) {
if (!strncmp("none", mode, 4))
- pdata->ecc_mode = NAND_ECC_NONE;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_NONE;
if (!strncmp("soft", mode, 4))
- pdata->ecc_mode = NAND_ECC_SOFT;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
if (!strncmp("hw", mode, 2))
- pdata->ecc_mode = NAND_ECC_HW;
+ pdata->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
}
if (!of_property_read_u32(pdev->dev.of_node,
"ti,davinci-ecc-bits", &prop))
@@ -585,21 +585,21 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
if (IS_ERR(pdata))
return PTR_ERR(pdata);
- switch (info->chip.ecc.mode) {
- case NAND_ECC_NONE:
+ switch (info->chip.ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_NONE:
pdata->ecc_bits = 0;
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
pdata->ecc_bits = 0;
/*
- * This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
- * avoid adding an extra ->ecc_algo field to
- * davinci_nand_pdata.
+ * This driver expects Hamming based ECC when engine_type is set
+ * to NAND_ECC_ENGINE_TYPE_SOFT. Force ecc.algo to
+ * NAND_ECC_ALGO_HAMMING to avoid adding an extra ->ecc_algo
+ * field to davinci_nand_pdata.
*/
info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
if (pdata->ecc_bits == 4) {
int chunks = mtd->writesize / 512;
@@ -850,7 +850,7 @@ static int nand_davinci_probe(struct platform_device *pdev)
info->mask_cle = pdata->mask_cle ? : MASK_CLE;
/* Use board-specific ECC config */
- info->chip.ecc.mode = pdata->ecc_mode;
+ info->chip.ecc.engine_type = pdata->engine_type;
info->chip.ecc.placement = pdata->ecc_placement;
spin_lock_irq(&davinci_nand_lock);
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 514a97ea4450..a6a6464974ec 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1237,7 +1237,7 @@ int denali_chip_init(struct denali_controller *denali,
chip->bbt_options |= NAND_BBT_USE_FLASH;
chip->bbt_options |= NAND_BBT_NO_OOB;
chip->options |= NAND_NO_SUBPAGE_WRITE;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.read_page = denali_read_page;
chip->ecc.write_page = denali_write_page;
diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c
index 40360352136b..94432a453e5e 100644
--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1456,7 +1456,7 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.calculate = doc200x_calculate_ecc;
nand->ecc.correct = doc200x_correct_data;
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
nand->ecc.size = 512;
nand->ecc.bytes = 6;
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index da89389faaae..b2af7f81fdf8 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -244,7 +244,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
return -EIO;
}
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
elbc_fcm_ctrl->max_bitflips = 0;
@@ -727,12 +727,12 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
unsigned int al;
- switch (chip->ecc.mode) {
+ switch (chip->ecc.engine_type) {
/*
* if ECC was not chosen in DT, decide whether to use HW or SW ECC from
* CS Base Register
*/
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
/* If CS Base Register selects full hardware ECC then use it */
if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
BR_DECC_CHK_GEN) {
@@ -740,23 +740,23 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
chip->ecc.write_page = fsl_elbc_write_page;
chip->ecc.write_subpage = fsl_elbc_write_subpage;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
chip->ecc.size = 512;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
} else {
/* otherwise fall back to default software ECC */
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
break;
/* if SW ECC was chosen in DT, we do not need to set anything here */
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
break;
- /* should we also implement NAND_ECC_HW to do as the code above? */
+ /* should we also implement *_ECC_ENGINE_CONTROLLER to do as above? */
default:
return -EINVAL;
}
@@ -786,8 +786,8 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
chip->page_shift);
dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
chip->phys_erase_shift);
- dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
- chip->ecc.mode);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.engine_type = %d\n",
+ chip->ecc.engine_type);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
chip->ecc.steps);
dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index b2ae759dd14e..0e7a9b64301e 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -309,7 +309,7 @@ static void fsl_ifc_cmdfunc(struct nand_chip *chip, unsigned int command,
ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
ifc_nand_ctrl->index += column;
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
ifc_nand_ctrl->eccread = 1;
fsl_ifc_do_read(chip, 0, mtd);
@@ -724,8 +724,8 @@ static int fsl_ifc_attach_chip(struct nand_chip *chip)
chip->page_shift);
dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__,
chip->phys_erase_shift);
- dev_dbg(priv->dev, "%s: nand->ecc.mode = %d\n", __func__,
- chip->ecc.mode);
+ dev_dbg(priv->dev, "%s: nand->ecc.engine_type = %d\n", __func__,
+ chip->ecc.engine_type);
dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__,
chip->ecc.steps);
dev_dbg(priv->dev, "%s: nand->ecc.bytes = %d\n", __func__,
@@ -912,7 +912,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
if (csor & CSOR_NAND_ECC_DEC_EN) {
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops);
/* Hardware generates ECC per 512 Bytes */
@@ -925,7 +925,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
chip->ecc.strength = 8;
}
} else {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
diff --git a/drivers/mtd/nand/raw/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c
index 49592b7e03a3..fc5a9df27cf1 100644
--- a/drivers/mtd/nand/raw/fsl_upm.c
+++ b/drivers/mtd/nand/raw/fsl_upm.c
@@ -163,7 +163,7 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
fun->chip.legacy.read_byte = fun_read_byte;
fun->chip.legacy.read_buf = fun_read_buf;
fun->chip.legacy.write_buf = fun_write_buf;
- fun->chip.ecc.mode = NAND_ECC_SOFT;
+ fun->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
fun->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
if (fun->mchip_count > 1)
fun->chip.legacy.select_chip = fun_select_chip;
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index ced570987e85..fd2926d6f5b2 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -900,8 +900,8 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
return 0;
}
- switch (nand->ecc.mode) {
- case NAND_ECC_HW:
+ switch (nand->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
dev_info(host->dev, "Using 1-bit HW ECC scheme\n");
nand->ecc.calculate = fsmc_read_hwecc_ecc1;
nand->ecc.correct = nand_correct_data;
@@ -910,14 +910,14 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
nand->ecc.options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
if (nand->ecc.algo == NAND_ECC_ALGO_BCH) {
dev_info(host->dev,
"Using 4-bit SW BCH ECC scheme\n");
break;
}
- case NAND_ECC_ON_DIE:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
break;
default:
@@ -929,7 +929,7 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
* Don't set layout for BCH4 SW ECC. This will be
* generated later in nand_bch_init() later.
*/
- if (nand->ecc.mode == NAND_ECC_HW) {
+ if (nand->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
switch (mtd->oobsize) {
case 16:
case 64:
@@ -1059,7 +1059,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
* Setup default ECC mode. nand_dt_init() called from nand_scan_ident()
* can overwrite this value if the DT provides a different value.
*/
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.hwctl = fsmc_enable_hwecc;
nand->ecc.size = 512;
nand->badblockbits = 7;
diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/gpio.c
index 667807c7100b..13645a8157a8 100644
--- a/drivers/mtd/nand/raw/gpio.c
+++ b/drivers/mtd/nand/raw/gpio.c
@@ -275,7 +275,7 @@ static int gpio_nand_probe(struct platform_device *pdev)
nand_set_flash_node(chip, pdev->dev.of_node);
chip->legacy.IO_ADDR_W = chip->legacy.IO_ADDR_R;
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
chip->options = gpiomtd->plat.options;
chip->legacy.chip_delay = gpiomtd->plat.chip_delay;
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 061a8ddda275..d1ea6df9fd64 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -2032,7 +2032,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
ecc->write_page_raw = gpmi_ecc_write_page_raw;
ecc->read_oob_raw = gpmi_ecc_read_oob_raw;
ecc->write_oob_raw = gpmi_ecc_write_oob_raw;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ecc->size = bch_geo->ecc_chunk_size;
ecc->strength = bch_geo->ecc_strength;
mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops);
diff --git a/drivers/mtd/nand/raw/hisi504_nand.c b/drivers/mtd/nand/raw/hisi504_nand.c
index b84238e2268a..8b2122ce6ec3 100644
--- a/drivers/mtd/nand/raw/hisi504_nand.c
+++ b/drivers/mtd/nand/raw/hisi504_nand.c
@@ -186,7 +186,7 @@ static void hisi_nfc_dma_transfer(struct hinfc_host *host, int todev)
hinfc_write(host, host->dma_buffer, HINFC504_DMA_ADDR_DATA);
hinfc_write(host, host->dma_oob, HINFC504_DMA_ADDR_OOB);
- if (chip->ecc.mode == NAND_ECC_NONE) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
hinfc_write(host, ((mtd->oobsize & HINFC504_DMA_LEN_OOB_MASK)
<< HINFC504_DMA_LEN_OOB_SHIFT), HINFC504_DMA_LEN);
@@ -468,7 +468,7 @@ static void hisi_nfc_cmdfunc(struct nand_chip *chip, unsigned command,
case NAND_CMD_STATUS:
flag = hinfc_read(host, HINFC504_CON);
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
hinfc_write(host,
flag & ~(HINFC504_CON_ECCTYPE_MASK <<
HINFC504_CON_ECCTYPE_SHIFT), HINFC504_CON);
@@ -721,7 +721,7 @@ static int hisi_nfc_attach_chip(struct nand_chip *chip)
}
hinfc_write(host, flag, HINFC504_CON);
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
hisi_nfc_ecc_probe(host);
return 0;
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
index 69423bb29adb..70309f18124c 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -194,8 +194,8 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
(chip->ecc.strength / 8);
}
- switch (chip->ecc.mode) {
- case NAND_ECC_HW:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
if (!nfc->ecc) {
dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
return -ENODEV;
@@ -205,22 +205,22 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
chip->ecc.calculate = ingenic_nand_ecc_calculate;
chip->ecc.correct = ingenic_nand_ecc_correct;
fallthrough;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
(nfc->ecc) ? "hardware ECC" : "software ECC",
chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
break;
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
dev_info(nfc->dev, "not using ECC\n");
break;
default:
dev_err(nfc->dev, "ECC mode %d not supported\n",
- chip->ecc.mode);
+ chip->ecc.engine_type);
return -EINVAL;
}
/* The NAND core will generate the ECC layout for SW ECC */
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
@@ -404,7 +404,7 @@ static int ingenic_nand_init_chip(struct platform_device *pdev,
mtd->dev.parent = dev;
chip->options = NAND_NO_SUBPAGE_WRITE;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->controller = &nfc->controller;
nand_set_flash_node(chip, np);
diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c
index 7521038af2ef..4940bb2e3c07 100644
--- a/drivers/mtd/nand/raw/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c
@@ -656,7 +656,7 @@ static int lpc32xx_nand_attach_chip(struct nand_chip *chip)
if (!host->dummy_buf)
return -ENOMEM;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
host->mlcsubpages = mtd->writesize / 512;
diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index ccb189c8e343..6db9d2ed6881 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -881,7 +881,7 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
/* NAND callbacks for LPC32xx SLC hardware */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->legacy.read_byte = lpc32xx_nand_read_byte;
chip->legacy.read_buf = lpc32xx_nand_read_buf;
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 3969cca7d925..f9cc03c11deb 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2247,7 +2247,8 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
int ret;
- if (ecc->mode != NAND_ECC_NONE && (!ecc->size || !ecc->strength)) {
+ if (ecc->engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
+ (!ecc->size || !ecc->strength)) {
if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
ecc->size = chip->base.eccreq.step_size;
ecc->strength = chip->base.eccreq.strength;
@@ -2259,15 +2260,15 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
}
}
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = marvell_nand_hw_ecc_controller_init(mtd, ecc);
if (ret)
return ret;
break;
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
- case NAND_ECC_ON_DIE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
if (!nfc->caps->is_nfcv2 && mtd->writesize != SZ_512 &&
mtd->writesize != SZ_2K) {
dev_err(nfc->dev, "NFCv1 cannot write %d bytes pages\n",
@@ -2465,7 +2466,7 @@ static int marvell_nand_attach_chip(struct nand_chip *chip)
return ret;
}
- if (chip->ecc.mode == NAND_ECC_HW) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
/*
* Subpage write not available with hardware ECC, prohibit also
* subpage read as in userspace subpage access would still be
@@ -2640,7 +2641,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
* Default to HW ECC engine mode. If the nand-ecc-mode property is given
* in the DT node, this entry will be overwritten in nand_scan_ident().
*/
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
/*
* Save a reference value for timing registers before
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 3f376471f3f7..4d1f5c8da270 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1197,7 +1197,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand)
if (ret)
return -EINVAL;
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.write_page_raw = meson_nfc_write_page_raw;
nand->ecc.write_page = meson_nfc_write_page_hwecc;
nand->ecc.write_oob_raw = nand_write_oob_std;
diff --git a/drivers/mtd/nand/raw/mpc5121_nfc.c b/drivers/mtd/nand/raw/mpc5121_nfc.c
index a67eded226db..dfd0d3ed5ed0 100644
--- a/drivers/mtd/nand/raw/mpc5121_nfc.c
+++ b/drivers/mtd/nand/raw/mpc5121_nfc.c
@@ -688,7 +688,7 @@ static int mpc5121_nfc_probe(struct platform_device *op)
chip->legacy.set_features = nand_get_set_features_notsupp;
chip->legacy.get_features = nand_get_set_features_notsupp;
chip->bbt_options = NAND_BBT_USE_FLASH;
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Support external chip-select logic on ADS5121 board */
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index c1a6e31aabb8..a0294c9161dd 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1226,8 +1226,8 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
int free, ret;
/* support only ecc hw mode */
- if (nand->ecc.mode != NAND_ECC_HW) {
- dev_err(dev, "ecc.mode not supported\n");
+ if (nand->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
+ dev_err(dev, "ecc.engine_type not supported\n");
return -EINVAL;
}
@@ -1390,7 +1390,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
nand->legacy.cmd_ctrl = mtk_nfc_cmd_ctrl;
/* set default mode in case dt entry is missing */
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand->ecc.write_subpage = mtk_nfc_write_subpage_hwecc;
nand->ecc.write_page_raw = mtk_nfc_write_page_raw;
diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index c2e9759cfba8..de3bd36f99e9 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -669,7 +669,7 @@ static void mxc_nand_enable_hwecc_v1_v2(struct nand_chip *chip, bool enable)
struct mxc_nand_host *host = nand_get_controller_data(chip);
uint16_t config1;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return;
config1 = readw(NFC_V1_V2_CONFIG1);
@@ -687,7 +687,7 @@ static void mxc_nand_enable_hwecc_v3(struct nand_chip *chip, bool enable)
struct mxc_nand_host *host = nand_get_controller_data(chip);
uint32_t config2;
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return;
config2 = readl(NFC_V3_CONFIG2);
@@ -1117,7 +1117,8 @@ static void preset_v1(struct mtd_info *mtd)
struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
uint16_t config1 = 0;
- if (nand_chip->ecc.mode == NAND_ECC_HW && mtd->writesize)
+ if (nand_chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST &&
+ mtd->writesize)
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
if (!host->devtype_data->irqpending_quirk)
@@ -1227,7 +1228,7 @@ static void preset_v2(struct mtd_info *mtd)
if (mtd->writesize) {
uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
- if (nand_chip->ecc.mode == NAND_ECC_HW)
+ if (nand_chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
host->eccsize = get_eccsize(mtd);
@@ -1303,7 +1304,7 @@ static void preset_v3(struct mtd_info *mtd)
}
if (mtd->writesize) {
- if (chip->ecc.mode == NAND_ECC_HW)
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
config2 |= NFC_V3_CONFIG2_ECC_EN;
config2 |= NFC_V3_CONFIG2_PPB(
@@ -1680,8 +1681,8 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
struct mxc_nand_host *host = nand_get_controller_data(chip);
struct device *dev = mtd->dev.parent;
- switch (chip->ecc.mode) {
- case NAND_ECC_HW:
+ switch (chip->ecc.engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
chip->ecc.read_page = mxc_nand_read_page;
chip->ecc.read_page_raw = mxc_nand_read_page_raw;
chip->ecc.read_oob = mxc_nand_read_oob;
@@ -1690,7 +1691,7 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
chip->ecc.write_oob = mxc_nand_write_oob;
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
break;
default:
@@ -1728,7 +1729,7 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
*/
host->used_oobsize = min(mtd->oobsize, 218U);
- if (chip->ecc.mode == NAND_ECC_HW) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
if (is_imx21_nfc(host) || is_imx27_nfc(host))
chip->ecc.strength = 1;
else
@@ -1843,9 +1844,9 @@ static int mxcnd_probe(struct platform_device *pdev)
mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
if (host->pdata.hw_ecc) {
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
} else {
- this->ecc.mode = NAND_ECC_SOFT;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
this->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 9de58c4c4443..2821c82b79ad 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5018,28 +5018,45 @@ static const char * const nand_ecc_modes[] = {
[NAND_ECC_ON_DIE] = "on-die",
};
-static int of_get_nand_ecc_mode(struct device_node *np)
+static enum nand_ecc_engine_type
+of_get_nand_ecc_engine_type(struct device_node *np)
{
+ enum nand_ecc_mode eng_type;
const char *pm;
- int err, i;
+ int err;
err = of_property_read_string(np, "nand-ecc-mode", &pm);
- if (err < 0)
- return err;
+ if (err)
+ return NAND_ECC_ENGINE_TYPE_INVALID;
- for (i = NAND_ECC_NONE; i < ARRAY_SIZE(nand_ecc_modes); i++)
- if (!strcasecmp(pm, nand_ecc_modes[i]))
- return i;
+ for (eng_type = NAND_ECC_NONE;
+ eng_type < ARRAY_SIZE(nand_ecc_modes); eng_type++) {
+ if (!strcasecmp(pm, nand_ecc_modes[eng_type])) {
+ switch (eng_type) {
+ case NAND_ECC_NONE:
+ return NAND_ECC_ENGINE_TYPE_NONE;
+ case NAND_ECC_SOFT:
+ return NAND_ECC_ENGINE_TYPE_SOFT;
+ case NAND_ECC_HW:
+ case NAND_ECC_HW_SYNDROME:
+ return NAND_ECC_ENGINE_TYPE_ON_HOST;
+ case NAND_ECC_ON_DIE:
+ return NAND_ECC_ENGINE_TYPE_ON_DIE;
+ default:
+ break;
+ }
+ }
+ }
/*
* For backward compatibility we support few obsoleted values that don't
- * have their mappings into the nand_ecc_mode enum anymore (they were
- * merged with other enums).
+ * have their mappings into the nand_ecc_engine_providers enum anymore
+ * (they were merged with other enums).
*/
if (!strcasecmp(pm, "soft_bch"))
- return NAND_ECC_SOFT;
+ return NAND_ECC_ENGINE_TYPE_SOFT;
- return -ENODEV;
+ return NAND_ECC_ENGINE_TYPE_INVALID;
}
static const char * const nand_ecc_algos[] = {
@@ -5121,8 +5138,9 @@ static bool of_get_nand_on_flash_bbt(struct device_node *np)
static int nand_dt_init(struct nand_chip *chip)
{
struct device_node *dn = nand_get_flash_node(chip);
+ enum nand_ecc_engine_type ecc_type;
enum nand_ecc_algo ecc_algo;
- int ecc_mode, ecc_strength, ecc_step;
+ int ecc_strength, ecc_step;
if (!dn)
return 0;
@@ -5136,13 +5154,13 @@ static int nand_dt_init(struct nand_chip *chip)
if (of_get_nand_on_flash_bbt(dn))
chip->bbt_options |= NAND_BBT_USE_FLASH;
- ecc_mode = of_get_nand_ecc_mode(dn);
+ ecc_type = of_get_nand_ecc_engine_type(dn);
ecc_algo = of_get_nand_ecc_algo(dn);
ecc_strength = of_get_nand_ecc_strength(dn);
ecc_step = of_get_nand_ecc_step_size(dn);
- if (ecc_mode >= 0)
- chip->ecc.mode = ecc_mode;
+ if (ecc_type != NAND_ECC_ENGINE_TYPE_INVALID)
+ chip->ecc.engine_type = ecc_type;
if (ecc_algo != NAND_ECC_ALGO_UNKNOWN)
chip->ecc.algo = ecc_algo;
@@ -5264,7 +5282,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
- if (WARN_ON(ecc->mode != NAND_ECC_SOFT))
+ if (WARN_ON(ecc->engine_type != NAND_ECC_ENGINE_TYPE_SOFT))
return -EINVAL;
switch (ecc->algo) {
@@ -5729,7 +5747,8 @@ static int nand_scan_tail(struct nand_chip *chip)
* If no default placement scheme is given, select an appropriate one.
*/
if (!mtd->ooblayout &&
- !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_ALGO_BCH)) {
+ !(ecc->engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+ ecc->algo == NAND_ECC_ALGO_BCH)) {
switch (mtd->oobsize) {
case 8:
case 16:
@@ -5747,7 +5766,7 @@ static int nand_scan_tail(struct nand_chip *chip)
* page with ECC layout when ->oobsize <= 128 for
* compatibility reasons.
*/
- if (ecc->mode == NAND_ECC_NONE) {
+ if (ecc->engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
mtd_set_ooblayout(mtd,
&nand_ooblayout_lp_ops);
break;
@@ -5765,8 +5784,9 @@ static int nand_scan_tail(struct nand_chip *chip)
* selected and we have 256 byte pagesize fallback to software ECC
*/
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
+
switch (ecc->placement) {
case NAND_ECC_PLACEMENT_UNKNOWN:
case NAND_ECC_PLACEMENT_OOB:
@@ -5823,7 +5843,7 @@ static int nand_scan_tail(struct nand_chip *chip)
}
pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
ecc->size, mtd->writesize);
- ecc->mode = NAND_ECC_SOFT;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
ecc->algo = NAND_ECC_ALGO_HAMMING;
break;
@@ -5835,7 +5855,7 @@ static int nand_scan_tail(struct nand_chip *chip)
}
fallthrough;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
ret = nand_set_ecc_soft_ops(chip);
if (ret) {
ret = -EINVAL;
@@ -5843,7 +5863,7 @@ static int nand_scan_tail(struct nand_chip *chip)
}
break;
- case NAND_ECC_ON_DIE:
+ case NAND_ECC_ENGINE_TYPE_ON_DIE:
if (!ecc->read_page || !ecc->write_page) {
WARN(1, "No ECC functions supplied; on-die ECC not possible\n");
ret = -EINVAL;
@@ -5855,8 +5875,8 @@ static int nand_scan_tail(struct nand_chip *chip)
ecc->write_oob = nand_write_oob_std;
break;
- case NAND_ECC_NONE:
- pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ pr_warn("NAND_ECC_ENGINE_TYPE_NONE selected by board driver. This is not recommended!\n");
ecc->read_page = nand_read_page_raw;
ecc->write_page = nand_write_page_raw;
ecc->read_oob = nand_read_oob_std;
@@ -5869,7 +5889,7 @@ static int nand_scan_tail(struct nand_chip *chip)
break;
default:
- WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode);
+ WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->engine_type);
ret = -EINVAL;
goto err_nand_manuf_cleanup;
}
@@ -5946,8 +5966,8 @@ static int nand_scan_tail(struct nand_chip *chip)
chip->pagecache.page = -1;
/* Large page NAND with SOFT_ECC should support subpage reads */
- switch (ecc->mode) {
- case NAND_ECC_SOFT:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_SOFT:
if (chip->page_shift > 9)
chip->options |= NAND_SUBPAGE_READ;
break;
@@ -6089,7 +6109,7 @@ EXPORT_SYMBOL(nand_scan_with_ids);
*/
void nand_cleanup(struct nand_chip *chip)
{
- if (chip->ecc.mode == NAND_ECC_SOFT &&
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
chip->ecc.algo == NAND_ECC_ALGO_BCH)
nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index a43b4d17bc69..c8ebfd8c77a1 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -497,13 +497,13 @@ static int micron_nand_init(struct nand_chip *chip)
ondie = micron_supports_on_die_ecc(chip);
if (ondie == MICRON_ON_DIE_MANDATORY &&
- chip->ecc.mode != NAND_ECC_ON_DIE) {
+ chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_DIE) {
pr_err("On-die ECC forcefully enabled, not supported\n");
ret = -EINVAL;
goto err_free_manuf_data;
}
- if (chip->ecc.mode == NAND_ECC_ON_DIE) {
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE) {
if (ondie == MICRON_ON_DIE_UNSUPPORTED) {
pr_err("On-die ECC selected but not supported\n");
ret = -EINVAL;
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index ae069905d7e4..436ed90a90ad 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -211,7 +211,8 @@ static int toshiba_nand_init(struct nand_chip *chip)
chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
/* Check that chip is BENAND and ECC mode is on-die */
- if (nand_is_slc(chip) && chip->ecc.mode == NAND_ECC_ON_DIE &&
+ if (nand_is_slc(chip) &&
+ chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE &&
chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND)
toshiba_nand_benand_init(chip);
diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index 9bcf1b9d4987..9c2115fe2111 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2234,7 +2234,7 @@ static int ns_attach_chip(struct nand_chip *chip)
return -EINVAL;
}
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.size = 512;
chip->ecc.strength = bch;
@@ -2274,7 +2274,7 @@ static int __init ns_init_module(void)
nsmtd = nand_to_mtd(chip);
nand_set_controller_data(chip, (void *)ns);
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
/* and 'badblocks' parameters to work */
diff --git a/drivers/mtd/nand/raw/ndfc.c b/drivers/mtd/nand/raw/ndfc.c
index ed38338c1383..0fb4ba93c41e 100644
--- a/drivers/mtd/nand/raw/ndfc.c
+++ b/drivers/mtd/nand/raw/ndfc.c
@@ -149,7 +149,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
chip->ecc.correct = nand_correct_data;
chip->ecc.hwctl = ndfc_enable_hwecc;
chip->ecc.calculate = ndfc_calculate_ecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 256;
chip->ecc.bytes = 3;
chip->ecc.strength = 1;
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index 967ddbda1c48..512f60780a50 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -884,8 +884,8 @@ static int omap_correct_data(struct nand_chip *chip, u_char *dat,
int stat = 0;
/* Ex NAND_ECC_HW12_2048 */
- if ((info->nand.ecc.mode == NAND_ECC_HW) &&
- (info->nand.ecc.size == 2048))
+ if (info->nand.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST &&
+ info->nand.ecc.size == 2048)
blockCnt = 4;
else
blockCnt = 1;
@@ -2006,11 +2006,11 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
return -EINVAL;
/*
- * Bail out earlier to let NAND_ECC_SOFT code create its own
+ * Bail out earlier to let NAND_ECC_ENGINE_TYPE_SOFT code create its own
* ooblayout instead of using ours.
*/
if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
return 0;
}
@@ -2019,7 +2019,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
switch (info->ecc_opt) {
case OMAP_ECC_HAM1_CODE_HW:
dev_info(dev, "nand: using OMAP_ECC_HAM1_CODE_HW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.bytes = 3;
chip->ecc.size = 512;
chip->ecc.strength = 1;
@@ -2036,7 +2036,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 7;
chip->ecc.strength = 4;
@@ -2056,7 +2056,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH4_CODE_HW:
pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
/* 14th bit is kept reserved for ROM-code compatibility */
chip->ecc.bytes = 7 + 1;
@@ -2078,7 +2078,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 13;
chip->ecc.strength = 8;
@@ -2098,7 +2098,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH8_CODE_HW:
pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
/* 14th bit is kept reserved for ROM-code compatibility */
chip->ecc.bytes = 13 + 1;
@@ -2121,7 +2121,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
case OMAP_ECC_BCH16_CODE_HW:
pr_info("Using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.bytes = 26;
chip->ecc.strength = 16;
diff --git a/drivers/mtd/nand/raw/orion_nand.c b/drivers/mtd/nand/raw/orion_nand.c
index 7a5cfa3d883f..df9c0f8e4b4e 100644
--- a/drivers/mtd/nand/raw/orion_nand.c
+++ b/drivers/mtd/nand/raw/orion_nand.c
@@ -139,7 +139,7 @@ static int __init orion_nand_probe(struct platform_device *pdev)
nc->legacy.IO_ADDR_R = nc->legacy.IO_ADDR_W = io_base;
nc->legacy.cmd_ctrl = orion_nand_cmd_ctrl;
nc->legacy.read_buf = orion_nand_read_buf;
- nc->ecc.mode = NAND_ECC_SOFT;
+ nc->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
nc->ecc.algo = NAND_ECC_ALGO_HAMMING;
if (board->chip_delay)
diff --git a/drivers/mtd/nand/raw/pasemi_nand.c b/drivers/mtd/nand/raw/pasemi_nand.c
index 3eddc284614d..155e8c8f61e2 100644
--- a/drivers/mtd/nand/raw/pasemi_nand.c
+++ b/drivers/mtd/nand/raw/pasemi_nand.c
@@ -132,7 +132,7 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
chip->legacy.read_buf = pasemi_read_buf;
chip->legacy.write_buf = pasemi_write_buf;
chip->legacy.chip_delay = 0;
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* Enable the following for a flash based bad block table */
diff --git a/drivers/mtd/nand/raw/plat_nand.c b/drivers/mtd/nand/raw/plat_nand.c
index dbc089c8872f..b98c0d5c413f 100644
--- a/drivers/mtd/nand/raw/plat_nand.c
+++ b/drivers/mtd/nand/raw/plat_nand.c
@@ -66,7 +66,7 @@ static int plat_nand_probe(struct platform_device *pdev)
data->chip.options |= pdata->chip.options;
data->chip.bbt_options |= pdata->chip.bbt_options;
- data->chip.ecc.mode = NAND_ECC_SOFT;
+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index f1daf330951b..0a05674b3ab5 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2548,7 +2548,7 @@ static int qcom_nand_attach_chip(struct nand_chip *chip)
ecc->write_page_raw = qcom_nandc_write_page_raw;
ecc->write_oob = qcom_nandc_write_oob;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
diff --git a/drivers/mtd/nand/raw/r852.c b/drivers/mtd/nand/raw/r852.c
index f0988cda4479..6b7addd2c420 100644
--- a/drivers/mtd/nand/raw/r852.c
+++ b/drivers/mtd/nand/raw/r852.c
@@ -859,7 +859,7 @@ static int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
chip->legacy.write_buf = r852_write_buf;
/* ecc */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
chip->ecc.size = R852_DMA_LEN;
chip->ecc.bytes = SM_OOB_SIZE;
diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
index dfe5a0f07385..88301fd29729 100644
--- a/drivers/mtd/nand/raw/s3c2410.c
+++ b/drivers/mtd/nand/raw/s3c2410.c
@@ -904,7 +904,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
nmtd->info = info;
nmtd->set = set;
- chip->ecc.mode = info->platform->ecc_mode;
+ chip->ecc.engine_type = info->platform->engine_type;
/*
* If you use u-boot BBT creation code, specifying this flag will
@@ -929,24 +929,24 @@ static int s3c2410_nand_attach_chip(struct nand_chip *chip)
struct mtd_info *mtd = nand_to_mtd(chip);
struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
- switch (chip->ecc.mode) {
+ switch (chip->ecc.engine_type) {
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
dev_info(info->device, "ECC disabled\n");
break;
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
/*
- * This driver expects Hamming based ECC when ecc_mode is set
- * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_ALGO_HAMMING to
- * avoid adding an extra ecc_algo field to
- * s3c2410_platform_nand.
+ * This driver expects Hamming based ECC when engine_type is set
+ * to NAND_ECC_ENGINE_TYPE_SOFT. Force ecc.algo to
+ * NAND_ECC_ALGO_HAMMING to avoid adding an extra ecc_algo field
+ * to s3c2410_platform_nand.
*/
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
dev_info(info->device, "soft ECC\n");
break;
- case NAND_ECC_HW:
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
chip->ecc.calculate = s3c2410_nand_calculate_ecc;
chip->ecc.correct = s3c2410_nand_correct_data;
chip->ecc.strength = 1;
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index 9dbd6fdbe264..13df4bdf792a 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -1039,12 +1039,12 @@ static int flctl_chip_attach_chip(struct nand_chip *chip)
chip->ecc.strength = 4;
chip->ecc.read_page = flctl_read_page_hwecc;
chip->ecc.write_page = flctl_write_page_hwecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
/* 4 symbols ECC enabled */
flctl->flcmncr_base |= _4ECCEN;
} else {
- chip->ecc.mode = NAND_ECC_SOFT;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
}
diff --git a/drivers/mtd/nand/raw/sharpsl.c b/drivers/mtd/nand/raw/sharpsl.c
index 51286f7acf54..1327bfb3d5d3 100644
--- a/drivers/mtd/nand/raw/sharpsl.c
+++ b/drivers/mtd/nand/raw/sharpsl.c
@@ -157,7 +157,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
/* 15 us command delay time */
this->legacy.chip_delay = 15;
/* set eccmode using hardware ECC */
- this->ecc.mode = NAND_ECC_HW;
+ this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
this->ecc.size = 256;
this->ecc.bytes = 3;
this->ecc.strength = 1;
diff --git a/drivers/mtd/nand/raw/socrates_nand.c b/drivers/mtd/nand/raw/socrates_nand.c
index 72a3a7f98282..0f63ff6f7fe7 100644
--- a/drivers/mtd/nand/raw/socrates_nand.c
+++ b/drivers/mtd/nand/raw/socrates_nand.c
@@ -153,7 +153,8 @@ static int socrates_nand_probe(struct platform_device *ofdev)
nand_chip->legacy.read_buf = socrates_nand_read_buf;
nand_chip->legacy.dev_ready = socrates_nand_device_ready;
- nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
+ /* enable ECC */
+ nand_chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
nand_chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
/* TODO: I have no idea what real delay is. */
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 65c9d17b25a3..d4f016d9251f 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1725,14 +1725,15 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip)
int ret;
/*
- * Only NAND_ECC_HW mode is actually supported
+ * Only NAND_ECC_ENGINE_TYPE_ON_HOST mode is actually supported
* Hamming => ecc.strength = 1
* BCH4 => ecc.strength = 4
* BCH8 => ecc.strength = 8
* ECC sector size = 512
*/
- if (chip->ecc.mode != NAND_ECC_HW) {
- dev_err(nfc->dev, "nand_ecc_mode is not well defined in the DT\n");
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
+ dev_err(nfc->dev,
+ "nand_ecc_engine_type is not well defined in the DT\n");
return -EINVAL;
}
@@ -1942,7 +1943,7 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
NAND_USES_DMA;
/* Default ECC settings */
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = FMC2_ECC_STEP_SIZE;
chip->ecc.strength = FMC2_ECC_BCH8;
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index ffbc1651fadc..c6dd2e6d9ef8 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1575,7 +1575,7 @@ static int sunxi_nand_ooblayout_free(struct mtd_info *mtd, int section,
* only have 2 bytes available in the first user data
* section.
*/
- if (!section && ecc->mode == NAND_ECC_HW) {
+ if (!section && ecc->engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
oobregion->offset = 2;
oobregion->length = 2;
@@ -1720,11 +1720,11 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
{
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
sunxi_nand_hw_ecc_ctrl_cleanup(ecc);
break;
- case NAND_ECC_NONE:
+ case NAND_ECC_ENGINE_TYPE_NONE:
default:
break;
}
@@ -1752,14 +1752,14 @@ static int sunxi_nand_attach_chip(struct nand_chip *nand)
if (!ecc->size || !ecc->strength)
return -EINVAL;
- switch (ecc->mode) {
- case NAND_ECC_HW:
+ switch (ecc->engine_type) {
+ case NAND_ECC_ENGINE_TYPE_ON_HOST:
ret = sunxi_nand_hw_ecc_ctrl_init(nand, ecc, np);
if (ret)
return ret;
break;
- case NAND_ECC_NONE:
- case NAND_ECC_SOFT:
+ case NAND_ECC_ENGINE_TYPE_NONE:
+ case NAND_ECC_ENGINE_TYPE_SOFT:
break;
default:
return -EINVAL;
@@ -1991,7 +1991,7 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
* Set the ECC mode to the default value in case nothing is specified
* in the DT.
*/
- nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand_set_flash_node(nand, np);
mtd = nand_to_mtd(nand);
diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c
index 2154b6f860dd..b0872b9cd768 100644
--- a/drivers/mtd/nand/raw/tango_nand.c
+++ b/drivers/mtd/nand/raw/tango_nand.c
@@ -511,7 +511,7 @@ static int tango_attach_chip(struct nand_chip *chip)
{
struct nand_ecc_ctrl *ecc = &chip->ecc;
- ecc->mode = NAND_ECC_HW;
+ ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
ecc->algo = NAND_ECC_ALGO_BCH;
ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index e2e13effc8a6..2325b06ccc9a 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -916,7 +916,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (chip->bbt_options & NAND_BBT_USE_FLASH)
chip->bbt_options |= NAND_BBT_NO_OOB;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.steps = mtd->writesize / chip->ecc.size;
if (chip->base.eccreq.step_size != 512) {
diff --git a/drivers/mtd/nand/raw/tmio_nand.c b/drivers/mtd/nand/raw/tmio_nand.c
index 843a8683b737..235a2f7b1bad 100644
--- a/drivers/mtd/nand/raw/tmio_nand.c
+++ b/drivers/mtd/nand/raw/tmio_nand.c
@@ -410,7 +410,7 @@ static int tmio_probe(struct platform_device *dev)
nand_chip->legacy.read_buf = tmio_nand_read_buf;
/* set eccmode using hardware ECC */
- nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
nand_chip->ecc.size = 512;
nand_chip->ecc.bytes = 6;
nand_chip->ecc.strength = 2;
diff --git a/drivers/mtd/nand/raw/txx9ndfmc.c b/drivers/mtd/nand/raw/txx9ndfmc.c
index 47d966871445..ef81dce6b5c4 100644
--- a/drivers/mtd/nand/raw/txx9ndfmc.c
+++ b/drivers/mtd/nand/raw/txx9ndfmc.c
@@ -329,7 +329,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
chip->ecc.calculate = txx9ndfmc_calculate_ecc;
chip->ecc.correct = txx9ndfmc_correct_data;
chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
- chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.strength = 1;
chip->legacy.chip_delay = 100;
chip->controller = &drvdata->controller;
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index 7248c5901183..8ee2c1f539c4 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -732,7 +732,7 @@ static void vf610_nfc_init_controller(struct vf610_nfc *nfc)
else
vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
- if (nfc->chip.ecc.mode == NAND_ECC_HW) {
+ if (nfc->chip.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
/* Set ECC status offset in SRAM */
vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
CONFIG_ECC_SRAM_ADDR_MASK,
@@ -761,7 +761,7 @@ static int vf610_nfc_attach_chip(struct nand_chip *chip)
return -ENXIO;
}
- if (chip->ecc.mode != NAND_ECC_HW)
+ if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
return 0;
if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
diff --git a/drivers/mtd/nand/raw/xway_nand.c b/drivers/mtd/nand/raw/xway_nand.c
index 909072e82a68..3332c9aa462a 100644
--- a/drivers/mtd/nand/raw/xway_nand.c
+++ b/drivers/mtd/nand/raw/xway_nand.c
@@ -180,7 +180,7 @@ static int xway_nand_probe(struct platform_device *pdev)
data->chip.legacy.read_byte = xway_read_byte;
data->chip.legacy.chip_delay = 30;
- data->chip.ecc.mode = NAND_ECC_SOFT;
+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
platform_set_drvdata(pdev, data);
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 63aa061427bb..8f7f1cce3b4b 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -303,7 +303,7 @@ static const struct nand_ecc_caps __name = { \
/**
* struct nand_ecc_ctrl - Control structure for ECC
- * @mode: ECC mode
+ * @engine_type: ECC engine type
* @placement: OOB bytes placement
* @algo: ECC algorithm
* @steps: number of ECC steps per page
@@ -356,7 +356,7 @@ static const struct nand_ecc_caps __name = { \
* @write_oob: function to write chip OOB data
*/
struct nand_ecc_ctrl {
- enum nand_ecc_mode mode;
+ enum nand_ecc_engine_type engine_type;
enum nand_ecc_placement placement;
enum nand_ecc_algo algo;
int steps;
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h
index 6e2b252a4ce6..dd474dd44848 100644
--- a/include/linux/platform_data/mtd-davinci.h
+++ b/include/linux/platform_data/mtd-davinci.h
@@ -60,15 +60,15 @@ struct davinci_nand_pdata { /* platform_data */
struct mtd_partition *parts;
unsigned nr_parts;
- /* none == NAND_ECC_NONE (strongly *not* advised!!)
- * soft == NAND_ECC_SOFT
- * else == NAND_ECC_HW, according to ecc_bits
+ /* none == NAND_ECC_ENGINE_TYPE_NONE (strongly *not* advised!!)
+ * soft == NAND_ECC_ENGINE_TYPE_SOFT
+ * else == NAND_ECC_ENGINE_TYPE_ON_HOST, according to ecc_bits
*
* All DaVinci-family chips support 1-bit hardware ECC.
* Newer ones also support 4-bit ECC, but are awkward
* using it with large page chips.
*/
- enum nand_ecc_mode ecc_mode;
+ enum nand_ecc_engine_type engine_type;
enum nand_ecc_placement ecc_placement;
u8 ecc_bits;
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index 08675b16f9e1..25390fc3e795 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -49,7 +49,7 @@ struct s3c2410_platform_nand {
unsigned int ignore_unset_ecc:1;
- enum nand_ecc_mode ecc_mode;
+ enum nand_ecc_engine_type engine_type;
int nr_sets;
struct s3c2410_nand_set *sets;
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 11/20] mtd: nand: Create a helper to extract the ECC configuration
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.
Let's hide the ECC configuration access behind a helper so we can later
split those 2 concepts.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 8cf5bdbea782..9cbb41a5541c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -523,6 +523,16 @@ nanddev_get_memorg(struct nand_device *nand)
return &nand->memorg;
}
+/**
+ * nanddev_get_ecc_conf() - Extract the ECC configuration from a NAND device
+ * @nand: NAND device
+ */
+static inline const struct nand_ecc_props *
+nanddev_get_ecc_conf(struct nand_device *nand)
+{
+ return &nand->eccreq;
+}
+
int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
struct module *owner);
void nanddev_cleanup(struct nand_device *nand);
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 11/20] mtd: nand: Create a helper to extract the ECC configuration
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.
Let's hide the ECC configuration access behind a helper so we can later
split those 2 concepts.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 8cf5bdbea782..9cbb41a5541c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -523,6 +523,16 @@ nanddev_get_memorg(struct nand_device *nand)
return &nand->memorg;
}
+/**
+ * nanddev_get_ecc_conf() - Extract the ECC configuration from a NAND device
+ * @nand: NAND device
+ */
+static inline const struct nand_ecc_props *
+nanddev_get_ecc_conf(struct nand_device *nand)
+{
+ return &nand->eccreq;
+}
+
int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
struct module *owner);
void nanddev_cleanup(struct nand_device *nand);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 11/20] mtd: nand: Create a helper to extract the ECC configuration
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.
Let's hide the ECC configuration access behind a helper so we can later
split those 2 concepts.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 8cf5bdbea782..9cbb41a5541c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -523,6 +523,16 @@ nanddev_get_memorg(struct nand_device *nand)
return &nand->memorg;
}
+/**
+ * nanddev_get_ecc_conf() - Extract the ECC configuration from a NAND device
+ * @nand: NAND device
+ */
+static inline const struct nand_ecc_props *
+nanddev_get_ecc_conf(struct nand_device *nand)
+{
+ return &nand->eccreq;
+}
+
int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
struct module *owner);
void nanddev_cleanup(struct nand_device *nand);
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 12/20] mtd: spinand: Use nanddev_get_ecc_conf() when relevant
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Instead of accessing ->strength/step_size directly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/spi/core.c | 6 +++---
drivers/mtd/nand/spi/macronix.c | 7 ++++---
drivers/mtd/nand/spi/toshiba.c | 6 +++---
3 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 6f6ec8aa143d..56019de28a90 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -419,7 +419,7 @@ static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
* fixed, so let's return the maximum possible value so that
* wear-leveling layers move the data immediately.
*/
- return nand->eccreq.strength;
+ return nanddev_get_ecc_conf(nand)->strength;
case STATUS_ECC_UNCOR_ERROR:
return -EBADMSG;
@@ -1091,8 +1091,8 @@ static int spinand_init(struct spinand_device *spinand)
mtd->oobavail = ret;
/* Propagate ECC information to mtd_info */
- mtd->ecc_strength = nand->eccreq.strength;
- mtd->ecc_step_size = nand->eccreq.step_size;
+ mtd->ecc_strength = nanddev_get_ecc_conf(nand)->strength;
+ mtd->ecc_step_size = nanddev_get_ecc_conf(nand)->step_size;
return 0;
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 0f900f3aa21a..9ff8debd5994 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -84,10 +84,11 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
* data around if it's not necessary.
*/
if (mx35lf1ge4ab_get_eccsr(spinand, &eccsr))
- return nand->eccreq.strength;
+ return nanddev_get_ecc_conf(nand)->strength;
- if (WARN_ON(eccsr > nand->eccreq.strength || !eccsr))
- return nand->eccreq.strength;
+ if (WARN_ON(eccsr > nanddev_get_ecc_conf(nand)->strength ||
+ !eccsr))
+ return nanddev_get_ecc_conf(nand)->strength;
return eccsr;
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
index bc801d83343e..21fde2875674 100644
--- a/drivers/mtd/nand/spi/toshiba.c
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -90,12 +90,12 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
* data around if it's not necessary.
*/
if (spi_mem_exec_op(spinand->spimem, &op))
- return nand->eccreq.strength;
+ return nanddev_get_ecc_conf(nand)->strength;
mbf >>= 4;
- if (WARN_ON(mbf > nand->eccreq.strength || !mbf))
- return nand->eccreq.strength;
+ if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf))
+ return nanddev_get_ecc_conf(nand)->strength;
return mbf;
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 12/20] mtd: spinand: Use nanddev_get_ecc_conf() when relevant
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Instead of accessing ->strength/step_size directly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/spi/core.c | 6 +++---
drivers/mtd/nand/spi/macronix.c | 7 ++++---
drivers/mtd/nand/spi/toshiba.c | 6 +++---
3 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 6f6ec8aa143d..56019de28a90 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -419,7 +419,7 @@ static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
* fixed, so let's return the maximum possible value so that
* wear-leveling layers move the data immediately.
*/
- return nand->eccreq.strength;
+ return nanddev_get_ecc_conf(nand)->strength;
case STATUS_ECC_UNCOR_ERROR:
return -EBADMSG;
@@ -1091,8 +1091,8 @@ static int spinand_init(struct spinand_device *spinand)
mtd->oobavail = ret;
/* Propagate ECC information to mtd_info */
- mtd->ecc_strength = nand->eccreq.strength;
- mtd->ecc_step_size = nand->eccreq.step_size;
+ mtd->ecc_strength = nanddev_get_ecc_conf(nand)->strength;
+ mtd->ecc_step_size = nanddev_get_ecc_conf(nand)->step_size;
return 0;
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 0f900f3aa21a..9ff8debd5994 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -84,10 +84,11 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
* data around if it's not necessary.
*/
if (mx35lf1ge4ab_get_eccsr(spinand, &eccsr))
- return nand->eccreq.strength;
+ return nanddev_get_ecc_conf(nand)->strength;
- if (WARN_ON(eccsr > nand->eccreq.strength || !eccsr))
- return nand->eccreq.strength;
+ if (WARN_ON(eccsr > nanddev_get_ecc_conf(nand)->strength ||
+ !eccsr))
+ return nanddev_get_ecc_conf(nand)->strength;
return eccsr;
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
index bc801d83343e..21fde2875674 100644
--- a/drivers/mtd/nand/spi/toshiba.c
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -90,12 +90,12 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
* data around if it's not necessary.
*/
if (spi_mem_exec_op(spinand->spimem, &op))
- return nand->eccreq.strength;
+ return nanddev_get_ecc_conf(nand)->strength;
mbf >>= 4;
- if (WARN_ON(mbf > nand->eccreq.strength || !mbf))
- return nand->eccreq.strength;
+ if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf))
+ return nanddev_get_ecc_conf(nand)->strength;
return mbf;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 12/20] mtd: spinand: Use nanddev_get_ecc_conf() when relevant
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Instead of accessing ->strength/step_size directly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/spi/core.c | 6 +++---
drivers/mtd/nand/spi/macronix.c | 7 ++++---
drivers/mtd/nand/spi/toshiba.c | 6 +++---
3 files changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 6f6ec8aa143d..56019de28a90 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -419,7 +419,7 @@ static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
* fixed, so let's return the maximum possible value so that
* wear-leveling layers move the data immediately.
*/
- return nand->eccreq.strength;
+ return nanddev_get_ecc_conf(nand)->strength;
case STATUS_ECC_UNCOR_ERROR:
return -EBADMSG;
@@ -1091,8 +1091,8 @@ static int spinand_init(struct spinand_device *spinand)
mtd->oobavail = ret;
/* Propagate ECC information to mtd_info */
- mtd->ecc_strength = nand->eccreq.strength;
- mtd->ecc_step_size = nand->eccreq.step_size;
+ mtd->ecc_strength = nanddev_get_ecc_conf(nand)->strength;
+ mtd->ecc_step_size = nanddev_get_ecc_conf(nand)->step_size;
return 0;
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 0f900f3aa21a..9ff8debd5994 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -84,10 +84,11 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
* data around if it's not necessary.
*/
if (mx35lf1ge4ab_get_eccsr(spinand, &eccsr))
- return nand->eccreq.strength;
+ return nanddev_get_ecc_conf(nand)->strength;
- if (WARN_ON(eccsr > nand->eccreq.strength || !eccsr))
- return nand->eccreq.strength;
+ if (WARN_ON(eccsr > nanddev_get_ecc_conf(nand)->strength ||
+ !eccsr))
+ return nanddev_get_ecc_conf(nand)->strength;
return eccsr;
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
index bc801d83343e..21fde2875674 100644
--- a/drivers/mtd/nand/spi/toshiba.c
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -90,12 +90,12 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
* data around if it's not necessary.
*/
if (spi_mem_exec_op(spinand->spimem, &op))
- return nand->eccreq.strength;
+ return nanddev_get_ecc_conf(nand)->strength;
mbf >>= 4;
- if (WARN_ON(mbf > nand->eccreq.strength || !mbf))
- return nand->eccreq.strength;
+ if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf))
+ return nanddev_get_ecc_conf(nand)->strength;
return mbf;
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 13/20] mtd: nand: Create helpers to set/extract the ECC requirements
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.
Let's hide the ECC requirements access behind helpers so we can later
split those 2 concepts. As the structures have not been clarified yet,
these helpers access the same internal variable as
nanddev_get_ecc_conf() for now.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 9cbb41a5541c..348fb2ad4d90 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -533,6 +533,30 @@ nanddev_get_ecc_conf(struct nand_device *nand)
return &nand->eccreq;
}
+/**
+ * nanddev_get_ecc_requirements() - Extract the ECC requirements from a NAND
+ * device
+ * @nand: NAND device
+ */
+static inline const struct nand_ecc_props *
+nanddev_get_ecc_requirements(struct nand_device *nand)
+{
+ return &nand->eccreq;
+}
+
+/**
+ * nanddev_set_ecc_requirements() - Assign the ECC requirements of a NAND
+ * device
+ * @nand: NAND device
+ * @reqs: Requirements
+ */
+static inline void
+nanddev_set_ecc_requirements(struct nand_device *nand,
+ const struct nand_ecc_props *reqs)
+{
+ nand->eccreq = *reqs;
+}
+
int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
struct module *owner);
void nanddev_cleanup(struct nand_device *nand);
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 13/20] mtd: nand: Create helpers to set/extract the ECC requirements
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.
Let's hide the ECC requirements access behind helpers so we can later
split those 2 concepts. As the structures have not been clarified yet,
these helpers access the same internal variable as
nanddev_get_ecc_conf() for now.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 9cbb41a5541c..348fb2ad4d90 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -533,6 +533,30 @@ nanddev_get_ecc_conf(struct nand_device *nand)
return &nand->eccreq;
}
+/**
+ * nanddev_get_ecc_requirements() - Extract the ECC requirements from a NAND
+ * device
+ * @nand: NAND device
+ */
+static inline const struct nand_ecc_props *
+nanddev_get_ecc_requirements(struct nand_device *nand)
+{
+ return &nand->eccreq;
+}
+
+/**
+ * nanddev_set_ecc_requirements() - Assign the ECC requirements of a NAND
+ * device
+ * @nand: NAND device
+ * @reqs: Requirements
+ */
+static inline void
+nanddev_set_ecc_requirements(struct nand_device *nand,
+ const struct nand_ecc_props *reqs)
+{
+ nand->eccreq = *reqs;
+}
+
int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
struct module *owner);
void nanddev_cleanup(struct nand_device *nand);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 13/20] mtd: nand: Create helpers to set/extract the ECC requirements
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Despite its current name, the eccreq field actually encodes both the
NAND requirements and the final ECC configuration. That works fine when
using on-die ECC since those 2 concepts match perfectly, but it starts
being a problem as soon as we use on-host ECC engines, where we're not
guaranteed to have a perfect match.
Let's hide the ECC requirements access behind helpers so we can later
split those 2 concepts. As the structures have not been clarified yet,
these helpers access the same internal variable as
nanddev_get_ecc_conf() for now.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 9cbb41a5541c..348fb2ad4d90 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -533,6 +533,30 @@ nanddev_get_ecc_conf(struct nand_device *nand)
return &nand->eccreq;
}
+/**
+ * nanddev_get_ecc_requirements() - Extract the ECC requirements from a NAND
+ * device
+ * @nand: NAND device
+ */
+static inline const struct nand_ecc_props *
+nanddev_get_ecc_requirements(struct nand_device *nand)
+{
+ return &nand->eccreq;
+}
+
+/**
+ * nanddev_set_ecc_requirements() - Assign the ECC requirements of a NAND
+ * device
+ * @nand: NAND device
+ * @reqs: Requirements
+ */
+static inline void
+nanddev_set_ecc_requirements(struct nand_device *nand,
+ const struct nand_ecc_props *reqs)
+{
+ nand->eccreq = *reqs;
+}
+
int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
struct module *owner);
void nanddev_cleanup(struct nand_device *nand);
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 14/20] mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Instead of accessing ->strength/step_size directly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/atmel/nand-controller.c | 10 +++--
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 ++--
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 13 +++---
drivers/mtd/nand/raw/marvell_nand.c | 8 ++--
drivers/mtd/nand/raw/mtk_nand.c | 6 ++-
drivers/mtd/nand/raw/nand_base.c | 27 +++++++-----
drivers/mtd/nand/raw/nand_esmt.c | 15 ++++---
drivers/mtd/nand/raw/nand_hynix.c | 44 +++++++++++---------
drivers/mtd/nand/raw/nand_jedec.c | 9 +++-
drivers/mtd/nand/raw/nand_micron.c | 17 +++++---
drivers/mtd/nand/raw/nand_onfi.c | 17 ++++++--
drivers/mtd/nand/raw/nand_samsung.c | 22 ++++++----
drivers/mtd/nand/raw/nand_toshiba.c | 14 ++++---
drivers/mtd/nand/raw/sunxi_nand.c | 6 ++-
drivers/mtd/nand/raw/tegra_nand.c | 12 ++++--
drivers/mtd/nand/spi/core.c | 2 +-
16 files changed, 144 insertions(+), 86 deletions(-)
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 85cf396731ce..3fba91d7991a 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1043,6 +1043,8 @@ static int atmel_hsmc_nand_pmecc_read_page_raw(struct nand_chip *chip,
static int atmel_nand_pmecc_init(struct nand_chip *chip)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
struct atmel_nand *nand = to_atmel_nand(chip);
struct atmel_nand_controller *nc;
@@ -1072,15 +1074,15 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
else if (chip->ecc.strength)
req.ecc.strength = chip->ecc.strength;
- else if (chip->base.eccreq.strength)
- req.ecc.strength = chip->base.eccreq.strength;
+ else if (requirements->strength)
+ req.ecc.strength = requirements->strength;
else
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
if (chip->ecc.size)
req.ecc.sectorsize = chip->ecc.size;
- else if (chip->base.eccreq.step_size)
- req.ecc.sectorsize = chip->base.eccreq.step_size;
+ else if (requirements->step_size)
+ req.ecc.sectorsize = requirements->step_size;
else
req.ecc.sectorsize = ATMEL_PMECC_SECTOR_SIZE_AUTO;
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 164617b33942..a774247b0caa 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2506,6 +2506,8 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
{
struct mtd_info *mtd = nand_to_mtd(&host->chip);
struct nand_chip *chip = &host->chip;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct brcmnand_controller *ctrl = host->ctrl;
struct brcmnand_cfg *cfg = &host->hwcfg;
char msg[128];
@@ -2563,10 +2565,10 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!chip->ecc.size || !chip->ecc.strength)) {
- if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
+ if (requirements->step_size && requirements->strength) {
/* use detected ECC parameters */
- chip->ecc.size = chip->base.eccreq.step_size;
- chip->ecc.strength = chip->base.eccreq.strength;
+ chip->ecc.size = requirements->step_size;
+ chip->ecc.strength = requirements->strength;
dev_info(ctrl->dev, "Using ECC step-size %d, strength %d\n",
chip->ecc.size, chip->ecc.strength);
}
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index d1ea6df9fd64..2bdcbc3197f7 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -272,8 +272,8 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this,
default:
dev_err(this->dev,
"unsupported nand chip. ecc bits : %d, ecc size : %d\n",
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ nanddev_get_ecc_requirements(&chip->base)->strength,
+ nanddev_get_ecc_requirements(&chip->base)->step_size);
return -EINVAL;
}
geo->ecc_chunk_size = ecc_step;
@@ -509,6 +509,8 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
static int common_nfc_set_geometry(struct gpmi_nand_data *this)
{
+ struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct nand_chip *chip = &this->nand;
if (chip->ecc.strength > 0 && chip->ecc.size > 0)
@@ -517,13 +519,12 @@ static int common_nfc_set_geometry(struct gpmi_nand_data *this)
if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
|| legacy_set_geometry(this)) {
- if (!(chip->base.eccreq.strength > 0 &&
- chip->base.eccreq.step_size > 0))
+ if (!(requirements->strength > 0 && requirements->step_size > 0))
return -EINVAL;
return set_geometry_by_ecc_info(this,
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ requirements->strength,
+ requirements->step_size);
}
return 0;
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index f9cc03c11deb..3ed315dd7798 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2244,14 +2244,16 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc)
{
struct nand_chip *chip = mtd_to_nand(mtd);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
int ret;
if (ecc->engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!ecc->size || !ecc->strength)) {
- if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
- ecc->size = chip->base.eccreq.step_size;
- ecc->strength = chip->base.eccreq.strength;
+ if (requirements->step_size && requirements->strength) {
+ ecc->size = requirements->step_size;
+ ecc->strength = requirements->strength;
} else {
dev_info(nfc->dev,
"No minimum ECC strength, using 1b/512B\n");
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index a0294c9161dd..c7b1230110d8 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1221,6 +1221,8 @@ static int mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd)
static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&nand->base);
struct mtk_nfc *nfc = nand_get_controller_data(nand);
u32 spare;
int free, ret;
@@ -1234,8 +1236,8 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
/* if optional dt settings not present */
if (!nand->ecc.size || !nand->ecc.strength) {
/* use datasheet requirements */
- nand->ecc.strength = nand->base.eccreq.strength;
- nand->ecc.size = nand->base.eccreq.step_size;
+ nand->ecc.strength = requirements->strength;
+ nand->ecc.size = requirements->step_size;
/*
* align eccstrength and eccsize
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 2821c82b79ad..d22f4243d715 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4725,6 +4725,8 @@ static inline bool is_full_id_nand(struct nand_flash_dev *type)
static bool find_full_id_nand(struct nand_chip *chip,
struct nand_flash_dev *type)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
u8 *id_data = chip->id.data;
@@ -4746,8 +4748,9 @@ static bool find_full_id_nand(struct nand_chip *chip,
memorg->pagesize *
memorg->pages_per_eraseblock);
chip->options |= type->options;
- chip->base.eccreq.strength = NAND_ECC_STRENGTH(type);
- chip->base.eccreq.step_size = NAND_ECC_STEP(type);
+ requirements.strength = NAND_ECC_STRENGTH(type);
+ requirements.step_size = NAND_ECC_STEP(type);
+ nanddev_set_ecc_requirements(base, &requirements);
chip->onfi_timing_mode_default =
type->onfi_timing_mode_default;
@@ -5449,10 +5452,12 @@ static int
nand_match_ecc_req(struct nand_chip *chip,
const struct nand_ecc_caps *caps, int oobavail)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
const struct nand_ecc_step_info *stepinfo;
- int req_step = chip->base.eccreq.step_size;
- int req_strength = chip->base.eccreq.strength;
+ int req_step = requirements->step_size;
+ int req_strength = requirements->strength;
int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total;
int best_step, best_strength, best_ecc_bytes;
int best_ecc_bytes_total = INT_MAX;
@@ -5643,9 +5648,11 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
int corr, ds_corr;
- if (ecc->size == 0 || chip->base.eccreq.step_size == 0)
+ if (ecc->size == 0 || requirements->step_size == 0)
/* Not enough information */
return true;
@@ -5654,10 +5661,10 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
* the correction density.
*/
corr = (mtd->writesize * ecc->strength) / ecc->size;
- ds_corr = (mtd->writesize * chip->base.eccreq.strength) /
- chip->base.eccreq.step_size;
+ ds_corr = (mtd->writesize * requirements->strength) /
+ requirements->step_size;
- return corr >= ds_corr && ecc->strength >= chip->base.eccreq.strength;
+ return corr >= ds_corr && ecc->strength >= requirements->strength;
}
static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
@@ -5944,8 +5951,8 @@ static int nand_scan_tail(struct nand_chip *chip)
if (!nand_ecc_strength_good(chip))
pr_warn("WARNING: %s: the ECC used on your system (%db/%dB) is too weak compared to the one required by the NAND chip (%db/%dB)\n",
mtd->name, chip->ecc.strength, chip->ecc.size,
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ nanddev_get_ecc_requirements(&chip->base)->strength,
+ nanddev_get_ecc_requirements(&chip->base)->step_size);
/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
diff --git a/drivers/mtd/nand/raw/nand_esmt.c b/drivers/mtd/nand/raw/nand_esmt.c
index 3338c68aaaf1..4412c407aef3 100644
--- a/drivers/mtd/nand/raw/nand_esmt.c
+++ b/drivers/mtd/nand/raw/nand_esmt.c
@@ -10,27 +10,32 @@
static void esmt_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
+
nand_decode_ext_id(chip);
/* Extract ECC requirements from 5th id byte. */
if (chip->id.len >= 5 && nand_is_slc(chip)) {
- chip->base.eccreq.step_size = 512;
+ requirements.step_size = 512;
switch (chip->id.data[4] & 0x3) {
case 0x0:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 0x1:
- chip->base.eccreq.strength = 2;
+ requirements.strength = 2;
break;
case 0x2:
- chip->base.eccreq.strength = 1;
+ requirements.strength = 1;
break;
default:
WARN(1, "Could not get ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
break;
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int esmt_nand_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index 7caedaa5b9e5..697219f1006a 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -495,34 +495,36 @@ static void hynix_nand_extract_oobsize(struct nand_chip *chip,
static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
bool valid_jedecid)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
u8 ecc_level = (chip->id.data[4] >> 4) & 0x7;
if (valid_jedecid) {
/* Reference: H27UCG8T2E datasheet */
- chip->base.eccreq.step_size = 1024;
+ requirements.step_size = 1024;
switch (ecc_level) {
case 0:
- chip->base.eccreq.step_size = 0;
- chip->base.eccreq.strength = 0;
+ requirements.step_size = 0;
+ requirements.strength = 0;
break;
case 1:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 2:
- chip->base.eccreq.strength = 24;
+ requirements.strength = 24;
break;
case 3:
- chip->base.eccreq.strength = 32;
+ requirements.strength = 32;
break;
case 4:
- chip->base.eccreq.strength = 40;
+ requirements.strength = 40;
break;
case 5:
- chip->base.eccreq.strength = 50;
+ requirements.strength = 50;
break;
case 6:
- chip->base.eccreq.strength = 60;
+ requirements.strength = 60;
break;
default:
/*
@@ -543,14 +545,14 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
if (nand_tech < 3) {
/* > 26nm, reference: H27UBG8T2A datasheet */
if (ecc_level < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << ecc_level;
+ requirements.step_size = 512;
+ requirements.strength = 1 << ecc_level;
} else if (ecc_level < 7) {
if (ecc_level == 5)
- chip->base.eccreq.step_size = 2048;
+ requirements.step_size = 2048;
else
- chip->base.eccreq.step_size = 1024;
- chip->base.eccreq.strength = 24;
+ requirements.step_size = 1024;
+ requirements.strength = 24;
} else {
/*
* We should never reach this case, but if that
@@ -563,18 +565,20 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
} else {
/* <= 26nm, reference: H27UBG8T2B datasheet */
if (!ecc_level) {
- chip->base.eccreq.step_size = 0;
- chip->base.eccreq.strength = 0;
+ requirements.step_size = 0;
+ requirements.strength = 0;
} else if (ecc_level < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << (ecc_level - 1);
+ requirements.step_size = 512;
+ requirements.strength = 1 << (ecc_level - 1);
} else {
- chip->base.eccreq.step_size = 1024;
- chip->base.eccreq.strength = 24 +
+ requirements.step_size = 1024;
+ requirements.strength = 24 +
(8 * (ecc_level - 5));
}
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
diff --git a/drivers/mtd/nand/raw/nand_jedec.c b/drivers/mtd/nand/raw/nand_jedec.c
index b15c42f48755..85b6d9372d80 100644
--- a/drivers/mtd/nand/raw/nand_jedec.c
+++ b/drivers/mtd/nand/raw/nand_jedec.c
@@ -23,6 +23,7 @@
*/
int nand_jedec_detect(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
struct nand_jedec_params *p;
@@ -120,8 +121,12 @@ int nand_jedec_detect(struct nand_chip *chip)
ecc = &p->ecc_info[0];
if (ecc->codeword_size >= 9) {
- chip->base.eccreq.strength = ecc->ecc_bits;
- chip->base.eccreq.step_size = 1 << ecc->codeword_size;
+ struct nand_ecc_props requirements = {
+ .strength = ecc->ecc_bits,
+ .step_size = 1 << ecc->codeword_size,
+ };
+
+ nanddev_set_ecc_requirements(base, &requirements);
} else {
pr_warn("Invalid codeword size\n");
}
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index c8ebfd8c77a1..e19f992138f3 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -413,6 +413,8 @@ enum {
*/
static int micron_supports_on_die_ecc(struct nand_chip *chip)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
u8 id[5];
int ret;
@@ -425,7 +427,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
+ if (requirements->strength != 4 && requirements->strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
/* 0x2 means on-die ECC is available. */
@@ -466,7 +468,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
+ if (requirements->strength != 4 && requirements->strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
return MICRON_ON_DIE_SUPPORTED;
@@ -474,6 +476,9 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
static int micron_nand_init(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(base);
struct mtd_info *mtd = nand_to_mtd(chip);
struct micron_nand *micron;
int ondie;
@@ -523,7 +528,7 @@ static int micron_nand_init(struct nand_chip *chip)
* That's not needed for 8-bit ECC, because the status expose
* a better approximation of the number of bitflips in a page.
*/
- if (chip->base.eccreq.strength == 4) {
+ if (requirements->strength == 4) {
micron->ecc.rawbuf = kmalloc(mtd->writesize +
mtd->oobsize,
GFP_KERNEL);
@@ -533,16 +538,16 @@ static int micron_nand_init(struct nand_chip *chip)
}
}
- if (chip->base.eccreq.strength == 4)
+ if (requirements->strength == 4)
mtd_set_ooblayout(mtd,
µn_nand_on_die_4_ooblayout_ops);
else
mtd_set_ooblayout(mtd,
µn_nand_on_die_8_ooblayout_ops);
- chip->ecc.bytes = chip->base.eccreq.strength * 2;
+ chip->ecc.bytes = requirements->strength * 2;
chip->ecc.size = 512;
- chip->ecc.strength = chip->base.eccreq.strength;
+ chip->ecc.strength = requirements->strength;
chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
diff --git a/drivers/mtd/nand/raw/nand_onfi.c b/drivers/mtd/nand/raw/nand_onfi.c
index be3456627288..45649e03797d 100644
--- a/drivers/mtd/nand/raw/nand_onfi.c
+++ b/drivers/mtd/nand/raw/nand_onfi.c
@@ -34,6 +34,8 @@ u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
struct nand_onfi_params *p)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements;
struct onfi_ext_param_page *ep;
struct onfi_ext_section *s;
struct onfi_ext_ecc_info *ecc;
@@ -94,8 +96,10 @@ static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
goto ext_out;
}
- chip->base.eccreq.strength = ecc->ecc_bits;
- chip->base.eccreq.step_size = 1 << ecc->codeword_size;
+ requirements.strength = ecc->ecc_bits;
+ requirements.step_size = 1 << ecc->codeword_size;
+ nanddev_set_ecc_requirements(base, &requirements);
+
ret = 0;
ext_out:
@@ -139,6 +143,7 @@ static void nand_bit_wise_majority(const void **srcbufs,
*/
int nand_onfi_detect(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
struct nand_onfi_params *p = NULL, *pbuf;
@@ -265,8 +270,12 @@ int nand_onfi_detect(struct nand_chip *chip)
chip->options |= NAND_BUSWIDTH_16;
if (p->ecc_bits != 0xff) {
- chip->base.eccreq.strength = p->ecc_bits;
- chip->base.eccreq.step_size = 512;
+ struct nand_ecc_props requirements = {
+ .strength = p->ecc_bits,
+ .step_size = 512,
+ };
+
+ nanddev_set_ecc_requirements(base, &requirements);
} else if (onfi_version >= 21 &&
(le16_to_cpu(p->features) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
diff --git a/drivers/mtd/nand/raw/nand_samsung.c b/drivers/mtd/nand/raw/nand_samsung.c
index 3a4a19e808f6..0be6b7563805 100644
--- a/drivers/mtd/nand/raw/nand_samsung.c
+++ b/drivers/mtd/nand/raw/nand_samsung.c
@@ -10,6 +10,8 @@
static void samsung_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
@@ -71,23 +73,23 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
/* Extract ECC requirements from 5th id byte*/
extid = (chip->id.data[4] >> 4) & 0x07;
if (extid < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << extid;
+ requirements.step_size = 512;
+ requirements.strength = 1 << extid;
} else {
- chip->base.eccreq.step_size = 1024;
+ requirements.step_size = 1024;
switch (extid) {
case 5:
- chip->base.eccreq.strength = 24;
+ requirements.strength = 24;
break;
case 6:
- chip->base.eccreq.strength = 40;
+ requirements.strength = 40;
break;
case 7:
- chip->base.eccreq.strength = 60;
+ requirements.strength = 60;
break;
default:
WARN(1, "Could not decode ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
}
}
} else {
@@ -97,8 +99,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
switch (chip->id.data[1]) {
/* K9F4G08U0D-S[I|C]B0(T00) */
case 0xDC:
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1;
+ requirements.step_size = 512;
+ requirements.strength = 1;
break;
/* K9F1G08U0E 21nm chips do not support subpage write */
@@ -112,6 +114,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
}
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int samsung_nand_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index 436ed90a90ad..5d3434587f25 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -145,6 +145,8 @@ static void toshiba_nand_benand_init(struct nand_chip *chip)
static void toshiba_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
@@ -175,23 +177,25 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
* - 24nm: 8 bit ECC for each 512Byte is required.
*/
if (chip->id.len >= 6 && nand_is_slc(chip)) {
- chip->base.eccreq.step_size = 512;
+ requirements.step_size = 512;
switch (chip->id.data[5] & 0x7) {
case 0x4:
- chip->base.eccreq.strength = 1;
+ requirements.strength = 1;
break;
case 0x5:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 0x6:
- chip->base.eccreq.strength = 8;
+ requirements.strength = 8;
break;
default:
WARN(1, "Could not get ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
break;
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int tc58teg5dclta00_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index c6dd2e6d9ef8..490ba485e939 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1732,6 +1732,8 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
static int sunxi_nand_attach_chip(struct nand_chip *nand)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&nand->base);
struct nand_ecc_ctrl *ecc = &nand->ecc;
struct device_node *np = nand_get_flash_node(nand);
int ret;
@@ -1745,8 +1747,8 @@ static int sunxi_nand_attach_chip(struct nand_chip *nand)
nand->options |= NAND_SUBPAGE_READ;
if (!ecc->size) {
- ecc->size = nand->base.eccreq.step_size;
- ecc->strength = nand->base.eccreq.strength;
+ ecc->size = requirements->step_size;
+ ecc->strength = requirements->strength;
}
if (!ecc->size || !ecc->strength)
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index 2325b06ccc9a..fecdb7e8f9e8 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -840,6 +840,8 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
int strength_len, int bits_per_step,
int oobsize)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
bool maximize = chip->ecc.options & NAND_ECC_MAXIMIZE;
int i;
@@ -855,7 +857,7 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
} else {
strength_sel = strength[i];
- if (strength_sel < chip->base.eccreq.strength)
+ if (strength_sel < requirements->strength)
continue;
}
@@ -908,6 +910,8 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
static int tegra_nand_attach_chip(struct nand_chip *chip)
{
struct tegra_nand_controller *ctrl = to_tegra_ctrl(chip->controller);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct tegra_nand_chip *nand = to_tegra_chip(chip);
struct mtd_info *mtd = nand_to_mtd(chip);
int bits_per_step;
@@ -919,9 +923,9 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.steps = mtd->writesize / chip->ecc.size;
- if (chip->base.eccreq.step_size != 512) {
+ if (requirements->step_size != 512) {
dev_err(ctrl->dev, "Unsupported step size %d\n",
- chip->base.eccreq.step_size);
+ requirements->step_size);
return -EINVAL;
}
@@ -952,7 +956,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (ret < 0) {
dev_err(ctrl->dev,
"No valid strength found, minimum %d\n",
- chip->base.eccreq.strength);
+ requirements->strength);
return ret;
}
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 56019de28a90..0939e0f9c6a4 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -903,7 +903,7 @@ int spinand_match_and_init(struct spinand_device *spinand,
continue;
nand->memorg = table[i].memorg;
- nand->eccreq = table[i].eccreq;
+ nanddev_set_ecc_requirements(nand, &table[i].eccreq);
spinand->eccinfo = table[i].eccinfo;
spinand->flags = table[i].flags;
spinand->id.len = 1 + table[i].devid.len;
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 14/20] mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Instead of accessing ->strength/step_size directly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/atmel/nand-controller.c | 10 +++--
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 ++--
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 13 +++---
drivers/mtd/nand/raw/marvell_nand.c | 8 ++--
drivers/mtd/nand/raw/mtk_nand.c | 6 ++-
drivers/mtd/nand/raw/nand_base.c | 27 +++++++-----
drivers/mtd/nand/raw/nand_esmt.c | 15 ++++---
drivers/mtd/nand/raw/nand_hynix.c | 44 +++++++++++---------
drivers/mtd/nand/raw/nand_jedec.c | 9 +++-
drivers/mtd/nand/raw/nand_micron.c | 17 +++++---
drivers/mtd/nand/raw/nand_onfi.c | 17 ++++++--
drivers/mtd/nand/raw/nand_samsung.c | 22 ++++++----
drivers/mtd/nand/raw/nand_toshiba.c | 14 ++++---
drivers/mtd/nand/raw/sunxi_nand.c | 6 ++-
drivers/mtd/nand/raw/tegra_nand.c | 12 ++++--
drivers/mtd/nand/spi/core.c | 2 +-
16 files changed, 144 insertions(+), 86 deletions(-)
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 85cf396731ce..3fba91d7991a 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1043,6 +1043,8 @@ static int atmel_hsmc_nand_pmecc_read_page_raw(struct nand_chip *chip,
static int atmel_nand_pmecc_init(struct nand_chip *chip)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
struct atmel_nand *nand = to_atmel_nand(chip);
struct atmel_nand_controller *nc;
@@ -1072,15 +1074,15 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
else if (chip->ecc.strength)
req.ecc.strength = chip->ecc.strength;
- else if (chip->base.eccreq.strength)
- req.ecc.strength = chip->base.eccreq.strength;
+ else if (requirements->strength)
+ req.ecc.strength = requirements->strength;
else
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
if (chip->ecc.size)
req.ecc.sectorsize = chip->ecc.size;
- else if (chip->base.eccreq.step_size)
- req.ecc.sectorsize = chip->base.eccreq.step_size;
+ else if (requirements->step_size)
+ req.ecc.sectorsize = requirements->step_size;
else
req.ecc.sectorsize = ATMEL_PMECC_SECTOR_SIZE_AUTO;
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 164617b33942..a774247b0caa 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2506,6 +2506,8 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
{
struct mtd_info *mtd = nand_to_mtd(&host->chip);
struct nand_chip *chip = &host->chip;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct brcmnand_controller *ctrl = host->ctrl;
struct brcmnand_cfg *cfg = &host->hwcfg;
char msg[128];
@@ -2563,10 +2565,10 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!chip->ecc.size || !chip->ecc.strength)) {
- if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
+ if (requirements->step_size && requirements->strength) {
/* use detected ECC parameters */
- chip->ecc.size = chip->base.eccreq.step_size;
- chip->ecc.strength = chip->base.eccreq.strength;
+ chip->ecc.size = requirements->step_size;
+ chip->ecc.strength = requirements->strength;
dev_info(ctrl->dev, "Using ECC step-size %d, strength %d\n",
chip->ecc.size, chip->ecc.strength);
}
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index d1ea6df9fd64..2bdcbc3197f7 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -272,8 +272,8 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this,
default:
dev_err(this->dev,
"unsupported nand chip. ecc bits : %d, ecc size : %d\n",
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ nanddev_get_ecc_requirements(&chip->base)->strength,
+ nanddev_get_ecc_requirements(&chip->base)->step_size);
return -EINVAL;
}
geo->ecc_chunk_size = ecc_step;
@@ -509,6 +509,8 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
static int common_nfc_set_geometry(struct gpmi_nand_data *this)
{
+ struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct nand_chip *chip = &this->nand;
if (chip->ecc.strength > 0 && chip->ecc.size > 0)
@@ -517,13 +519,12 @@ static int common_nfc_set_geometry(struct gpmi_nand_data *this)
if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
|| legacy_set_geometry(this)) {
- if (!(chip->base.eccreq.strength > 0 &&
- chip->base.eccreq.step_size > 0))
+ if (!(requirements->strength > 0 && requirements->step_size > 0))
return -EINVAL;
return set_geometry_by_ecc_info(this,
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ requirements->strength,
+ requirements->step_size);
}
return 0;
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index f9cc03c11deb..3ed315dd7798 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2244,14 +2244,16 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc)
{
struct nand_chip *chip = mtd_to_nand(mtd);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
int ret;
if (ecc->engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!ecc->size || !ecc->strength)) {
- if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
- ecc->size = chip->base.eccreq.step_size;
- ecc->strength = chip->base.eccreq.strength;
+ if (requirements->step_size && requirements->strength) {
+ ecc->size = requirements->step_size;
+ ecc->strength = requirements->strength;
} else {
dev_info(nfc->dev,
"No minimum ECC strength, using 1b/512B\n");
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index a0294c9161dd..c7b1230110d8 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1221,6 +1221,8 @@ static int mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd)
static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&nand->base);
struct mtk_nfc *nfc = nand_get_controller_data(nand);
u32 spare;
int free, ret;
@@ -1234,8 +1236,8 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
/* if optional dt settings not present */
if (!nand->ecc.size || !nand->ecc.strength) {
/* use datasheet requirements */
- nand->ecc.strength = nand->base.eccreq.strength;
- nand->ecc.size = nand->base.eccreq.step_size;
+ nand->ecc.strength = requirements->strength;
+ nand->ecc.size = requirements->step_size;
/*
* align eccstrength and eccsize
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 2821c82b79ad..d22f4243d715 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4725,6 +4725,8 @@ static inline bool is_full_id_nand(struct nand_flash_dev *type)
static bool find_full_id_nand(struct nand_chip *chip,
struct nand_flash_dev *type)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
u8 *id_data = chip->id.data;
@@ -4746,8 +4748,9 @@ static bool find_full_id_nand(struct nand_chip *chip,
memorg->pagesize *
memorg->pages_per_eraseblock);
chip->options |= type->options;
- chip->base.eccreq.strength = NAND_ECC_STRENGTH(type);
- chip->base.eccreq.step_size = NAND_ECC_STEP(type);
+ requirements.strength = NAND_ECC_STRENGTH(type);
+ requirements.step_size = NAND_ECC_STEP(type);
+ nanddev_set_ecc_requirements(base, &requirements);
chip->onfi_timing_mode_default =
type->onfi_timing_mode_default;
@@ -5449,10 +5452,12 @@ static int
nand_match_ecc_req(struct nand_chip *chip,
const struct nand_ecc_caps *caps, int oobavail)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
const struct nand_ecc_step_info *stepinfo;
- int req_step = chip->base.eccreq.step_size;
- int req_strength = chip->base.eccreq.strength;
+ int req_step = requirements->step_size;
+ int req_strength = requirements->strength;
int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total;
int best_step, best_strength, best_ecc_bytes;
int best_ecc_bytes_total = INT_MAX;
@@ -5643,9 +5648,11 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
int corr, ds_corr;
- if (ecc->size == 0 || chip->base.eccreq.step_size == 0)
+ if (ecc->size == 0 || requirements->step_size == 0)
/* Not enough information */
return true;
@@ -5654,10 +5661,10 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
* the correction density.
*/
corr = (mtd->writesize * ecc->strength) / ecc->size;
- ds_corr = (mtd->writesize * chip->base.eccreq.strength) /
- chip->base.eccreq.step_size;
+ ds_corr = (mtd->writesize * requirements->strength) /
+ requirements->step_size;
- return corr >= ds_corr && ecc->strength >= chip->base.eccreq.strength;
+ return corr >= ds_corr && ecc->strength >= requirements->strength;
}
static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
@@ -5944,8 +5951,8 @@ static int nand_scan_tail(struct nand_chip *chip)
if (!nand_ecc_strength_good(chip))
pr_warn("WARNING: %s: the ECC used on your system (%db/%dB) is too weak compared to the one required by the NAND chip (%db/%dB)\n",
mtd->name, chip->ecc.strength, chip->ecc.size,
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ nanddev_get_ecc_requirements(&chip->base)->strength,
+ nanddev_get_ecc_requirements(&chip->base)->step_size);
/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
diff --git a/drivers/mtd/nand/raw/nand_esmt.c b/drivers/mtd/nand/raw/nand_esmt.c
index 3338c68aaaf1..4412c407aef3 100644
--- a/drivers/mtd/nand/raw/nand_esmt.c
+++ b/drivers/mtd/nand/raw/nand_esmt.c
@@ -10,27 +10,32 @@
static void esmt_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
+
nand_decode_ext_id(chip);
/* Extract ECC requirements from 5th id byte. */
if (chip->id.len >= 5 && nand_is_slc(chip)) {
- chip->base.eccreq.step_size = 512;
+ requirements.step_size = 512;
switch (chip->id.data[4] & 0x3) {
case 0x0:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 0x1:
- chip->base.eccreq.strength = 2;
+ requirements.strength = 2;
break;
case 0x2:
- chip->base.eccreq.strength = 1;
+ requirements.strength = 1;
break;
default:
WARN(1, "Could not get ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
break;
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int esmt_nand_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index 7caedaa5b9e5..697219f1006a 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -495,34 +495,36 @@ static void hynix_nand_extract_oobsize(struct nand_chip *chip,
static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
bool valid_jedecid)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
u8 ecc_level = (chip->id.data[4] >> 4) & 0x7;
if (valid_jedecid) {
/* Reference: H27UCG8T2E datasheet */
- chip->base.eccreq.step_size = 1024;
+ requirements.step_size = 1024;
switch (ecc_level) {
case 0:
- chip->base.eccreq.step_size = 0;
- chip->base.eccreq.strength = 0;
+ requirements.step_size = 0;
+ requirements.strength = 0;
break;
case 1:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 2:
- chip->base.eccreq.strength = 24;
+ requirements.strength = 24;
break;
case 3:
- chip->base.eccreq.strength = 32;
+ requirements.strength = 32;
break;
case 4:
- chip->base.eccreq.strength = 40;
+ requirements.strength = 40;
break;
case 5:
- chip->base.eccreq.strength = 50;
+ requirements.strength = 50;
break;
case 6:
- chip->base.eccreq.strength = 60;
+ requirements.strength = 60;
break;
default:
/*
@@ -543,14 +545,14 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
if (nand_tech < 3) {
/* > 26nm, reference: H27UBG8T2A datasheet */
if (ecc_level < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << ecc_level;
+ requirements.step_size = 512;
+ requirements.strength = 1 << ecc_level;
} else if (ecc_level < 7) {
if (ecc_level == 5)
- chip->base.eccreq.step_size = 2048;
+ requirements.step_size = 2048;
else
- chip->base.eccreq.step_size = 1024;
- chip->base.eccreq.strength = 24;
+ requirements.step_size = 1024;
+ requirements.strength = 24;
} else {
/*
* We should never reach this case, but if that
@@ -563,18 +565,20 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
} else {
/* <= 26nm, reference: H27UBG8T2B datasheet */
if (!ecc_level) {
- chip->base.eccreq.step_size = 0;
- chip->base.eccreq.strength = 0;
+ requirements.step_size = 0;
+ requirements.strength = 0;
} else if (ecc_level < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << (ecc_level - 1);
+ requirements.step_size = 512;
+ requirements.strength = 1 << (ecc_level - 1);
} else {
- chip->base.eccreq.step_size = 1024;
- chip->base.eccreq.strength = 24 +
+ requirements.step_size = 1024;
+ requirements.strength = 24 +
(8 * (ecc_level - 5));
}
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
diff --git a/drivers/mtd/nand/raw/nand_jedec.c b/drivers/mtd/nand/raw/nand_jedec.c
index b15c42f48755..85b6d9372d80 100644
--- a/drivers/mtd/nand/raw/nand_jedec.c
+++ b/drivers/mtd/nand/raw/nand_jedec.c
@@ -23,6 +23,7 @@
*/
int nand_jedec_detect(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
struct nand_jedec_params *p;
@@ -120,8 +121,12 @@ int nand_jedec_detect(struct nand_chip *chip)
ecc = &p->ecc_info[0];
if (ecc->codeword_size >= 9) {
- chip->base.eccreq.strength = ecc->ecc_bits;
- chip->base.eccreq.step_size = 1 << ecc->codeword_size;
+ struct nand_ecc_props requirements = {
+ .strength = ecc->ecc_bits,
+ .step_size = 1 << ecc->codeword_size,
+ };
+
+ nanddev_set_ecc_requirements(base, &requirements);
} else {
pr_warn("Invalid codeword size\n");
}
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index c8ebfd8c77a1..e19f992138f3 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -413,6 +413,8 @@ enum {
*/
static int micron_supports_on_die_ecc(struct nand_chip *chip)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
u8 id[5];
int ret;
@@ -425,7 +427,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
+ if (requirements->strength != 4 && requirements->strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
/* 0x2 means on-die ECC is available. */
@@ -466,7 +468,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
+ if (requirements->strength != 4 && requirements->strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
return MICRON_ON_DIE_SUPPORTED;
@@ -474,6 +476,9 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
static int micron_nand_init(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(base);
struct mtd_info *mtd = nand_to_mtd(chip);
struct micron_nand *micron;
int ondie;
@@ -523,7 +528,7 @@ static int micron_nand_init(struct nand_chip *chip)
* That's not needed for 8-bit ECC, because the status expose
* a better approximation of the number of bitflips in a page.
*/
- if (chip->base.eccreq.strength == 4) {
+ if (requirements->strength == 4) {
micron->ecc.rawbuf = kmalloc(mtd->writesize +
mtd->oobsize,
GFP_KERNEL);
@@ -533,16 +538,16 @@ static int micron_nand_init(struct nand_chip *chip)
}
}
- if (chip->base.eccreq.strength == 4)
+ if (requirements->strength == 4)
mtd_set_ooblayout(mtd,
µn_nand_on_die_4_ooblayout_ops);
else
mtd_set_ooblayout(mtd,
µn_nand_on_die_8_ooblayout_ops);
- chip->ecc.bytes = chip->base.eccreq.strength * 2;
+ chip->ecc.bytes = requirements->strength * 2;
chip->ecc.size = 512;
- chip->ecc.strength = chip->base.eccreq.strength;
+ chip->ecc.strength = requirements->strength;
chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
diff --git a/drivers/mtd/nand/raw/nand_onfi.c b/drivers/mtd/nand/raw/nand_onfi.c
index be3456627288..45649e03797d 100644
--- a/drivers/mtd/nand/raw/nand_onfi.c
+++ b/drivers/mtd/nand/raw/nand_onfi.c
@@ -34,6 +34,8 @@ u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
struct nand_onfi_params *p)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements;
struct onfi_ext_param_page *ep;
struct onfi_ext_section *s;
struct onfi_ext_ecc_info *ecc;
@@ -94,8 +96,10 @@ static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
goto ext_out;
}
- chip->base.eccreq.strength = ecc->ecc_bits;
- chip->base.eccreq.step_size = 1 << ecc->codeword_size;
+ requirements.strength = ecc->ecc_bits;
+ requirements.step_size = 1 << ecc->codeword_size;
+ nanddev_set_ecc_requirements(base, &requirements);
+
ret = 0;
ext_out:
@@ -139,6 +143,7 @@ static void nand_bit_wise_majority(const void **srcbufs,
*/
int nand_onfi_detect(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
struct nand_onfi_params *p = NULL, *pbuf;
@@ -265,8 +270,12 @@ int nand_onfi_detect(struct nand_chip *chip)
chip->options |= NAND_BUSWIDTH_16;
if (p->ecc_bits != 0xff) {
- chip->base.eccreq.strength = p->ecc_bits;
- chip->base.eccreq.step_size = 512;
+ struct nand_ecc_props requirements = {
+ .strength = p->ecc_bits,
+ .step_size = 512,
+ };
+
+ nanddev_set_ecc_requirements(base, &requirements);
} else if (onfi_version >= 21 &&
(le16_to_cpu(p->features) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
diff --git a/drivers/mtd/nand/raw/nand_samsung.c b/drivers/mtd/nand/raw/nand_samsung.c
index 3a4a19e808f6..0be6b7563805 100644
--- a/drivers/mtd/nand/raw/nand_samsung.c
+++ b/drivers/mtd/nand/raw/nand_samsung.c
@@ -10,6 +10,8 @@
static void samsung_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
@@ -71,23 +73,23 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
/* Extract ECC requirements from 5th id byte*/
extid = (chip->id.data[4] >> 4) & 0x07;
if (extid < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << extid;
+ requirements.step_size = 512;
+ requirements.strength = 1 << extid;
} else {
- chip->base.eccreq.step_size = 1024;
+ requirements.step_size = 1024;
switch (extid) {
case 5:
- chip->base.eccreq.strength = 24;
+ requirements.strength = 24;
break;
case 6:
- chip->base.eccreq.strength = 40;
+ requirements.strength = 40;
break;
case 7:
- chip->base.eccreq.strength = 60;
+ requirements.strength = 60;
break;
default:
WARN(1, "Could not decode ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
}
}
} else {
@@ -97,8 +99,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
switch (chip->id.data[1]) {
/* K9F4G08U0D-S[I|C]B0(T00) */
case 0xDC:
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1;
+ requirements.step_size = 512;
+ requirements.strength = 1;
break;
/* K9F1G08U0E 21nm chips do not support subpage write */
@@ -112,6 +114,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
}
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int samsung_nand_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index 436ed90a90ad..5d3434587f25 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -145,6 +145,8 @@ static void toshiba_nand_benand_init(struct nand_chip *chip)
static void toshiba_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
@@ -175,23 +177,25 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
* - 24nm: 8 bit ECC for each 512Byte is required.
*/
if (chip->id.len >= 6 && nand_is_slc(chip)) {
- chip->base.eccreq.step_size = 512;
+ requirements.step_size = 512;
switch (chip->id.data[5] & 0x7) {
case 0x4:
- chip->base.eccreq.strength = 1;
+ requirements.strength = 1;
break;
case 0x5:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 0x6:
- chip->base.eccreq.strength = 8;
+ requirements.strength = 8;
break;
default:
WARN(1, "Could not get ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
break;
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int tc58teg5dclta00_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index c6dd2e6d9ef8..490ba485e939 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1732,6 +1732,8 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
static int sunxi_nand_attach_chip(struct nand_chip *nand)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&nand->base);
struct nand_ecc_ctrl *ecc = &nand->ecc;
struct device_node *np = nand_get_flash_node(nand);
int ret;
@@ -1745,8 +1747,8 @@ static int sunxi_nand_attach_chip(struct nand_chip *nand)
nand->options |= NAND_SUBPAGE_READ;
if (!ecc->size) {
- ecc->size = nand->base.eccreq.step_size;
- ecc->strength = nand->base.eccreq.strength;
+ ecc->size = requirements->step_size;
+ ecc->strength = requirements->strength;
}
if (!ecc->size || !ecc->strength)
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index 2325b06ccc9a..fecdb7e8f9e8 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -840,6 +840,8 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
int strength_len, int bits_per_step,
int oobsize)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
bool maximize = chip->ecc.options & NAND_ECC_MAXIMIZE;
int i;
@@ -855,7 +857,7 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
} else {
strength_sel = strength[i];
- if (strength_sel < chip->base.eccreq.strength)
+ if (strength_sel < requirements->strength)
continue;
}
@@ -908,6 +910,8 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
static int tegra_nand_attach_chip(struct nand_chip *chip)
{
struct tegra_nand_controller *ctrl = to_tegra_ctrl(chip->controller);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct tegra_nand_chip *nand = to_tegra_chip(chip);
struct mtd_info *mtd = nand_to_mtd(chip);
int bits_per_step;
@@ -919,9 +923,9 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.steps = mtd->writesize / chip->ecc.size;
- if (chip->base.eccreq.step_size != 512) {
+ if (requirements->step_size != 512) {
dev_err(ctrl->dev, "Unsupported step size %d\n",
- chip->base.eccreq.step_size);
+ requirements->step_size);
return -EINVAL;
}
@@ -952,7 +956,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (ret < 0) {
dev_err(ctrl->dev,
"No valid strength found, minimum %d\n",
- chip->base.eccreq.strength);
+ requirements->strength);
return ret;
}
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 56019de28a90..0939e0f9c6a4 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -903,7 +903,7 @@ int spinand_match_and_init(struct spinand_device *spinand,
continue;
nand->memorg = table[i].memorg;
- nand->eccreq = table[i].eccreq;
+ nanddev_set_ecc_requirements(nand, &table[i].eccreq);
spinand->eccinfo = table[i].eccinfo;
spinand->flags = table[i].flags;
spinand->id.len = 1 + table[i].devid.len;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 14/20] mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevant
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Instead of accessing ->strength/step_size directly.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/atmel/nand-controller.c | 10 +++--
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 ++--
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 13 +++---
drivers/mtd/nand/raw/marvell_nand.c | 8 ++--
drivers/mtd/nand/raw/mtk_nand.c | 6 ++-
drivers/mtd/nand/raw/nand_base.c | 27 +++++++-----
drivers/mtd/nand/raw/nand_esmt.c | 15 ++++---
drivers/mtd/nand/raw/nand_hynix.c | 44 +++++++++++---------
drivers/mtd/nand/raw/nand_jedec.c | 9 +++-
drivers/mtd/nand/raw/nand_micron.c | 17 +++++---
drivers/mtd/nand/raw/nand_onfi.c | 17 ++++++--
drivers/mtd/nand/raw/nand_samsung.c | 22 ++++++----
drivers/mtd/nand/raw/nand_toshiba.c | 14 ++++---
drivers/mtd/nand/raw/sunxi_nand.c | 6 ++-
drivers/mtd/nand/raw/tegra_nand.c | 12 ++++--
drivers/mtd/nand/spi/core.c | 2 +-
16 files changed, 144 insertions(+), 86 deletions(-)
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 85cf396731ce..3fba91d7991a 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1043,6 +1043,8 @@ static int atmel_hsmc_nand_pmecc_read_page_raw(struct nand_chip *chip,
static int atmel_nand_pmecc_init(struct nand_chip *chip)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
struct atmel_nand *nand = to_atmel_nand(chip);
struct atmel_nand_controller *nc;
@@ -1072,15 +1074,15 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
else if (chip->ecc.strength)
req.ecc.strength = chip->ecc.strength;
- else if (chip->base.eccreq.strength)
- req.ecc.strength = chip->base.eccreq.strength;
+ else if (requirements->strength)
+ req.ecc.strength = requirements->strength;
else
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
if (chip->ecc.size)
req.ecc.sectorsize = chip->ecc.size;
- else if (chip->base.eccreq.step_size)
- req.ecc.sectorsize = chip->base.eccreq.step_size;
+ else if (requirements->step_size)
+ req.ecc.sectorsize = requirements->step_size;
else
req.ecc.sectorsize = ATMEL_PMECC_SECTOR_SIZE_AUTO;
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 164617b33942..a774247b0caa 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2506,6 +2506,8 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
{
struct mtd_info *mtd = nand_to_mtd(&host->chip);
struct nand_chip *chip = &host->chip;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct brcmnand_controller *ctrl = host->ctrl;
struct brcmnand_cfg *cfg = &host->hwcfg;
char msg[128];
@@ -2563,10 +2565,10 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!chip->ecc.size || !chip->ecc.strength)) {
- if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
+ if (requirements->step_size && requirements->strength) {
/* use detected ECC parameters */
- chip->ecc.size = chip->base.eccreq.step_size;
- chip->ecc.strength = chip->base.eccreq.strength;
+ chip->ecc.size = requirements->step_size;
+ chip->ecc.strength = requirements->strength;
dev_info(ctrl->dev, "Using ECC step-size %d, strength %d\n",
chip->ecc.size, chip->ecc.strength);
}
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index d1ea6df9fd64..2bdcbc3197f7 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -272,8 +272,8 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this,
default:
dev_err(this->dev,
"unsupported nand chip. ecc bits : %d, ecc size : %d\n",
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ nanddev_get_ecc_requirements(&chip->base)->strength,
+ nanddev_get_ecc_requirements(&chip->base)->step_size);
return -EINVAL;
}
geo->ecc_chunk_size = ecc_step;
@@ -509,6 +509,8 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
static int common_nfc_set_geometry(struct gpmi_nand_data *this)
{
+ struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct nand_chip *chip = &this->nand;
if (chip->ecc.strength > 0 && chip->ecc.size > 0)
@@ -517,13 +519,12 @@ static int common_nfc_set_geometry(struct gpmi_nand_data *this)
if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
|| legacy_set_geometry(this)) {
- if (!(chip->base.eccreq.strength > 0 &&
- chip->base.eccreq.step_size > 0))
+ if (!(requirements->strength > 0 && requirements->step_size > 0))
return -EINVAL;
return set_geometry_by_ecc_info(this,
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ requirements->strength,
+ requirements->step_size);
}
return 0;
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index f9cc03c11deb..3ed315dd7798 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2244,14 +2244,16 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
struct nand_ecc_ctrl *ecc)
{
struct nand_chip *chip = mtd_to_nand(mtd);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
int ret;
if (ecc->engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
(!ecc->size || !ecc->strength)) {
- if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
- ecc->size = chip->base.eccreq.step_size;
- ecc->strength = chip->base.eccreq.strength;
+ if (requirements->step_size && requirements->strength) {
+ ecc->size = requirements->step_size;
+ ecc->strength = requirements->strength;
} else {
dev_info(nfc->dev,
"No minimum ECC strength, using 1b/512B\n");
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index a0294c9161dd..c7b1230110d8 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1221,6 +1221,8 @@ static int mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd)
static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
{
struct nand_chip *nand = mtd_to_nand(mtd);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&nand->base);
struct mtk_nfc *nfc = nand_get_controller_data(nand);
u32 spare;
int free, ret;
@@ -1234,8 +1236,8 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
/* if optional dt settings not present */
if (!nand->ecc.size || !nand->ecc.strength) {
/* use datasheet requirements */
- nand->ecc.strength = nand->base.eccreq.strength;
- nand->ecc.size = nand->base.eccreq.step_size;
+ nand->ecc.strength = requirements->strength;
+ nand->ecc.size = requirements->step_size;
/*
* align eccstrength and eccsize
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 2821c82b79ad..d22f4243d715 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4725,6 +4725,8 @@ static inline bool is_full_id_nand(struct nand_flash_dev *type)
static bool find_full_id_nand(struct nand_chip *chip,
struct nand_flash_dev *type)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
u8 *id_data = chip->id.data;
@@ -4746,8 +4748,9 @@ static bool find_full_id_nand(struct nand_chip *chip,
memorg->pagesize *
memorg->pages_per_eraseblock);
chip->options |= type->options;
- chip->base.eccreq.strength = NAND_ECC_STRENGTH(type);
- chip->base.eccreq.step_size = NAND_ECC_STEP(type);
+ requirements.strength = NAND_ECC_STRENGTH(type);
+ requirements.step_size = NAND_ECC_STEP(type);
+ nanddev_set_ecc_requirements(base, &requirements);
chip->onfi_timing_mode_default =
type->onfi_timing_mode_default;
@@ -5449,10 +5452,12 @@ static int
nand_match_ecc_req(struct nand_chip *chip,
const struct nand_ecc_caps *caps, int oobavail)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
const struct nand_ecc_step_info *stepinfo;
- int req_step = chip->base.eccreq.step_size;
- int req_strength = chip->base.eccreq.strength;
+ int req_step = requirements->step_size;
+ int req_strength = requirements->strength;
int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total;
int best_step, best_strength, best_ecc_bytes;
int best_ecc_bytes_total = INT_MAX;
@@ -5643,9 +5648,11 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
int corr, ds_corr;
- if (ecc->size == 0 || chip->base.eccreq.step_size == 0)
+ if (ecc->size == 0 || requirements->step_size == 0)
/* Not enough information */
return true;
@@ -5654,10 +5661,10 @@ static bool nand_ecc_strength_good(struct nand_chip *chip)
* the correction density.
*/
corr = (mtd->writesize * ecc->strength) / ecc->size;
- ds_corr = (mtd->writesize * chip->base.eccreq.strength) /
- chip->base.eccreq.step_size;
+ ds_corr = (mtd->writesize * requirements->strength) /
+ requirements->step_size;
- return corr >= ds_corr && ecc->strength >= chip->base.eccreq.strength;
+ return corr >= ds_corr && ecc->strength >= requirements->strength;
}
static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
@@ -5944,8 +5951,8 @@ static int nand_scan_tail(struct nand_chip *chip)
if (!nand_ecc_strength_good(chip))
pr_warn("WARNING: %s: the ECC used on your system (%db/%dB) is too weak compared to the one required by the NAND chip (%db/%dB)\n",
mtd->name, chip->ecc.strength, chip->ecc.size,
- chip->base.eccreq.strength,
- chip->base.eccreq.step_size);
+ nanddev_get_ecc_requirements(&chip->base)->strength,
+ nanddev_get_ecc_requirements(&chip->base)->step_size);
/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
diff --git a/drivers/mtd/nand/raw/nand_esmt.c b/drivers/mtd/nand/raw/nand_esmt.c
index 3338c68aaaf1..4412c407aef3 100644
--- a/drivers/mtd/nand/raw/nand_esmt.c
+++ b/drivers/mtd/nand/raw/nand_esmt.c
@@ -10,27 +10,32 @@
static void esmt_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
+
nand_decode_ext_id(chip);
/* Extract ECC requirements from 5th id byte. */
if (chip->id.len >= 5 && nand_is_slc(chip)) {
- chip->base.eccreq.step_size = 512;
+ requirements.step_size = 512;
switch (chip->id.data[4] & 0x3) {
case 0x0:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 0x1:
- chip->base.eccreq.strength = 2;
+ requirements.strength = 2;
break;
case 0x2:
- chip->base.eccreq.strength = 1;
+ requirements.strength = 1;
break;
default:
WARN(1, "Could not get ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
break;
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int esmt_nand_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index 7caedaa5b9e5..697219f1006a 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -495,34 +495,36 @@ static void hynix_nand_extract_oobsize(struct nand_chip *chip,
static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
bool valid_jedecid)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
u8 ecc_level = (chip->id.data[4] >> 4) & 0x7;
if (valid_jedecid) {
/* Reference: H27UCG8T2E datasheet */
- chip->base.eccreq.step_size = 1024;
+ requirements.step_size = 1024;
switch (ecc_level) {
case 0:
- chip->base.eccreq.step_size = 0;
- chip->base.eccreq.strength = 0;
+ requirements.step_size = 0;
+ requirements.strength = 0;
break;
case 1:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 2:
- chip->base.eccreq.strength = 24;
+ requirements.strength = 24;
break;
case 3:
- chip->base.eccreq.strength = 32;
+ requirements.strength = 32;
break;
case 4:
- chip->base.eccreq.strength = 40;
+ requirements.strength = 40;
break;
case 5:
- chip->base.eccreq.strength = 50;
+ requirements.strength = 50;
break;
case 6:
- chip->base.eccreq.strength = 60;
+ requirements.strength = 60;
break;
default:
/*
@@ -543,14 +545,14 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
if (nand_tech < 3) {
/* > 26nm, reference: H27UBG8T2A datasheet */
if (ecc_level < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << ecc_level;
+ requirements.step_size = 512;
+ requirements.strength = 1 << ecc_level;
} else if (ecc_level < 7) {
if (ecc_level == 5)
- chip->base.eccreq.step_size = 2048;
+ requirements.step_size = 2048;
else
- chip->base.eccreq.step_size = 1024;
- chip->base.eccreq.strength = 24;
+ requirements.step_size = 1024;
+ requirements.strength = 24;
} else {
/*
* We should never reach this case, but if that
@@ -563,18 +565,20 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
} else {
/* <= 26nm, reference: H27UBG8T2B datasheet */
if (!ecc_level) {
- chip->base.eccreq.step_size = 0;
- chip->base.eccreq.strength = 0;
+ requirements.step_size = 0;
+ requirements.strength = 0;
} else if (ecc_level < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << (ecc_level - 1);
+ requirements.step_size = 512;
+ requirements.strength = 1 << (ecc_level - 1);
} else {
- chip->base.eccreq.step_size = 1024;
- chip->base.eccreq.strength = 24 +
+ requirements.step_size = 1024;
+ requirements.strength = 24 +
(8 * (ecc_level - 5));
}
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
diff --git a/drivers/mtd/nand/raw/nand_jedec.c b/drivers/mtd/nand/raw/nand_jedec.c
index b15c42f48755..85b6d9372d80 100644
--- a/drivers/mtd/nand/raw/nand_jedec.c
+++ b/drivers/mtd/nand/raw/nand_jedec.c
@@ -23,6 +23,7 @@
*/
int nand_jedec_detect(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
struct nand_jedec_params *p;
@@ -120,8 +121,12 @@ int nand_jedec_detect(struct nand_chip *chip)
ecc = &p->ecc_info[0];
if (ecc->codeword_size >= 9) {
- chip->base.eccreq.strength = ecc->ecc_bits;
- chip->base.eccreq.step_size = 1 << ecc->codeword_size;
+ struct nand_ecc_props requirements = {
+ .strength = ecc->ecc_bits,
+ .step_size = 1 << ecc->codeword_size,
+ };
+
+ nanddev_set_ecc_requirements(base, &requirements);
} else {
pr_warn("Invalid codeword size\n");
}
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index c8ebfd8c77a1..e19f992138f3 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -413,6 +413,8 @@ enum {
*/
static int micron_supports_on_die_ecc(struct nand_chip *chip)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
u8 id[5];
int ret;
@@ -425,7 +427,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
+ if (requirements->strength != 4 && requirements->strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
/* 0x2 means on-die ECC is available. */
@@ -466,7 +468,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
/*
* We only support on-die ECC of 4/512 or 8/512
*/
- if (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
+ if (requirements->strength != 4 && requirements->strength != 8)
return MICRON_ON_DIE_UNSUPPORTED;
return MICRON_ON_DIE_SUPPORTED;
@@ -474,6 +476,9 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
static int micron_nand_init(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(base);
struct mtd_info *mtd = nand_to_mtd(chip);
struct micron_nand *micron;
int ondie;
@@ -523,7 +528,7 @@ static int micron_nand_init(struct nand_chip *chip)
* That's not needed for 8-bit ECC, because the status expose
* a better approximation of the number of bitflips in a page.
*/
- if (chip->base.eccreq.strength == 4) {
+ if (requirements->strength == 4) {
micron->ecc.rawbuf = kmalloc(mtd->writesize +
mtd->oobsize,
GFP_KERNEL);
@@ -533,16 +538,16 @@ static int micron_nand_init(struct nand_chip *chip)
}
}
- if (chip->base.eccreq.strength == 4)
+ if (requirements->strength == 4)
mtd_set_ooblayout(mtd,
µn_nand_on_die_4_ooblayout_ops);
else
mtd_set_ooblayout(mtd,
µn_nand_on_die_8_ooblayout_ops);
- chip->ecc.bytes = chip->base.eccreq.strength * 2;
+ chip->ecc.bytes = requirements->strength * 2;
chip->ecc.size = 512;
- chip->ecc.strength = chip->base.eccreq.strength;
+ chip->ecc.strength = requirements->strength;
chip->ecc.algo = NAND_ECC_ALGO_BCH;
chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
diff --git a/drivers/mtd/nand/raw/nand_onfi.c b/drivers/mtd/nand/raw/nand_onfi.c
index be3456627288..45649e03797d 100644
--- a/drivers/mtd/nand/raw/nand_onfi.c
+++ b/drivers/mtd/nand/raw/nand_onfi.c
@@ -34,6 +34,8 @@ u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
struct nand_onfi_params *p)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements;
struct onfi_ext_param_page *ep;
struct onfi_ext_section *s;
struct onfi_ext_ecc_info *ecc;
@@ -94,8 +96,10 @@ static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
goto ext_out;
}
- chip->base.eccreq.strength = ecc->ecc_bits;
- chip->base.eccreq.step_size = 1 << ecc->codeword_size;
+ requirements.strength = ecc->ecc_bits;
+ requirements.step_size = 1 << ecc->codeword_size;
+ nanddev_set_ecc_requirements(base, &requirements);
+
ret = 0;
ext_out:
@@ -139,6 +143,7 @@ static void nand_bit_wise_majority(const void **srcbufs,
*/
int nand_onfi_detect(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
struct nand_onfi_params *p = NULL, *pbuf;
@@ -265,8 +270,12 @@ int nand_onfi_detect(struct nand_chip *chip)
chip->options |= NAND_BUSWIDTH_16;
if (p->ecc_bits != 0xff) {
- chip->base.eccreq.strength = p->ecc_bits;
- chip->base.eccreq.step_size = 512;
+ struct nand_ecc_props requirements = {
+ .strength = p->ecc_bits,
+ .step_size = 512,
+ };
+
+ nanddev_set_ecc_requirements(base, &requirements);
} else if (onfi_version >= 21 &&
(le16_to_cpu(p->features) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
diff --git a/drivers/mtd/nand/raw/nand_samsung.c b/drivers/mtd/nand/raw/nand_samsung.c
index 3a4a19e808f6..0be6b7563805 100644
--- a/drivers/mtd/nand/raw/nand_samsung.c
+++ b/drivers/mtd/nand/raw/nand_samsung.c
@@ -10,6 +10,8 @@
static void samsung_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
@@ -71,23 +73,23 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
/* Extract ECC requirements from 5th id byte*/
extid = (chip->id.data[4] >> 4) & 0x07;
if (extid < 5) {
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1 << extid;
+ requirements.step_size = 512;
+ requirements.strength = 1 << extid;
} else {
- chip->base.eccreq.step_size = 1024;
+ requirements.step_size = 1024;
switch (extid) {
case 5:
- chip->base.eccreq.strength = 24;
+ requirements.strength = 24;
break;
case 6:
- chip->base.eccreq.strength = 40;
+ requirements.strength = 40;
break;
case 7:
- chip->base.eccreq.strength = 60;
+ requirements.strength = 60;
break;
default:
WARN(1, "Could not decode ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
}
}
} else {
@@ -97,8 +99,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
switch (chip->id.data[1]) {
/* K9F4G08U0D-S[I|C]B0(T00) */
case 0xDC:
- chip->base.eccreq.step_size = 512;
- chip->base.eccreq.strength = 1;
+ requirements.step_size = 512;
+ requirements.strength = 1;
break;
/* K9F1G08U0E 21nm chips do not support subpage write */
@@ -112,6 +114,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
}
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int samsung_nand_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index 436ed90a90ad..5d3434587f25 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -145,6 +145,8 @@ static void toshiba_nand_benand_init(struct nand_chip *chip)
static void toshiba_nand_decode_id(struct nand_chip *chip)
{
+ struct nand_device *base = &chip->base;
+ struct nand_ecc_props requirements = {};
struct mtd_info *mtd = nand_to_mtd(chip);
struct nand_memory_organization *memorg;
@@ -175,23 +177,25 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
* - 24nm: 8 bit ECC for each 512Byte is required.
*/
if (chip->id.len >= 6 && nand_is_slc(chip)) {
- chip->base.eccreq.step_size = 512;
+ requirements.step_size = 512;
switch (chip->id.data[5] & 0x7) {
case 0x4:
- chip->base.eccreq.strength = 1;
+ requirements.strength = 1;
break;
case 0x5:
- chip->base.eccreq.strength = 4;
+ requirements.strength = 4;
break;
case 0x6:
- chip->base.eccreq.strength = 8;
+ requirements.strength = 8;
break;
default:
WARN(1, "Could not get ECC info");
- chip->base.eccreq.step_size = 0;
+ requirements.step_size = 0;
break;
}
}
+
+ nanddev_set_ecc_requirements(base, &requirements);
}
static int tc58teg5dclta00_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index c6dd2e6d9ef8..490ba485e939 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1732,6 +1732,8 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
static int sunxi_nand_attach_chip(struct nand_chip *nand)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&nand->base);
struct nand_ecc_ctrl *ecc = &nand->ecc;
struct device_node *np = nand_get_flash_node(nand);
int ret;
@@ -1745,8 +1747,8 @@ static int sunxi_nand_attach_chip(struct nand_chip *nand)
nand->options |= NAND_SUBPAGE_READ;
if (!ecc->size) {
- ecc->size = nand->base.eccreq.step_size;
- ecc->strength = nand->base.eccreq.strength;
+ ecc->size = requirements->step_size;
+ ecc->strength = requirements->strength;
}
if (!ecc->size || !ecc->strength)
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index 2325b06ccc9a..fecdb7e8f9e8 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -840,6 +840,8 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
int strength_len, int bits_per_step,
int oobsize)
{
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
bool maximize = chip->ecc.options & NAND_ECC_MAXIMIZE;
int i;
@@ -855,7 +857,7 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
} else {
strength_sel = strength[i];
- if (strength_sel < chip->base.eccreq.strength)
+ if (strength_sel < requirements->strength)
continue;
}
@@ -908,6 +910,8 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
static int tegra_nand_attach_chip(struct nand_chip *chip)
{
struct tegra_nand_controller *ctrl = to_tegra_ctrl(chip->controller);
+ const struct nand_ecc_props *requirements =
+ nanddev_get_ecc_requirements(&chip->base);
struct tegra_nand_chip *nand = to_tegra_chip(chip);
struct mtd_info *mtd = nand_to_mtd(chip);
int bits_per_step;
@@ -919,9 +923,9 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
chip->ecc.size = 512;
chip->ecc.steps = mtd->writesize / chip->ecc.size;
- if (chip->base.eccreq.step_size != 512) {
+ if (requirements->step_size != 512) {
dev_err(ctrl->dev, "Unsupported step size %d\n",
- chip->base.eccreq.step_size);
+ requirements->step_size);
return -EINVAL;
}
@@ -952,7 +956,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
if (ret < 0) {
dev_err(ctrl->dev,
"No valid strength found, minimum %d\n",
- chip->base.eccreq.strength);
+ requirements->strength);
return ret;
}
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index 56019de28a90..0939e0f9c6a4 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -903,7 +903,7 @@ int spinand_match_and_init(struct spinand_device *spinand,
continue;
nand->memorg = table[i].memorg;
- nand->eccreq = table[i].eccreq;
+ nanddev_set_ecc_requirements(nand, &table[i].eccreq);
spinand->eccinfo = table[i].eccinfo;
spinand->flags = table[i].flags;
spinand->id.len = 1 + table[i].devid.len;
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 15/20] mtd: nand: Use the new generic ECC object
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Embed a generic NAND ECC high-level object in the nand_device
structure to carry all the ECC engine configuration/data.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 348fb2ad4d90..697ea2474a7c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -301,7 +301,7 @@ struct nand_ecc {
* struct nand_device - NAND device
* @mtd: MTD instance attached to the NAND device
* @memorg: memory layout
- * @eccreq: ECC requirements
+ * @ecc: NAND ECC object attached to the NAND device
* @rowconv: position to row address converter
* @bbt: bad block table info
* @ops: NAND operations attached to the NAND device
@@ -309,8 +309,8 @@ struct nand_ecc {
* Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND)
* should declare their own NAND object embedding a nand_device struct (that's
* how inheritance is done).
- * struct_nand_device->memorg and struct_nand_device->eccreq should be filled
- * at device detection time to reflect the NAND device
+ * struct_nand_device->memorg and struct_nand_device->ecc.requirements should
+ * be filled at device detection time to reflect the NAND device
* capabilities/requirements. Once this is done nanddev_init() can be called.
* It will take care of converting NAND information into MTD ones, which means
* the specialized NAND layers should never manually tweak
@@ -319,7 +319,7 @@ struct nand_ecc {
struct nand_device {
struct mtd_info mtd;
struct nand_memory_organization memorg;
- struct nand_ecc_props eccreq;
+ struct nand_ecc ecc;
struct nand_row_converter rowconv;
struct nand_bbt bbt;
const struct nand_ops *ops;
@@ -530,7 +530,7 @@ nanddev_get_memorg(struct nand_device *nand)
static inline const struct nand_ecc_props *
nanddev_get_ecc_conf(struct nand_device *nand)
{
- return &nand->eccreq;
+ return &nand->ecc.ctx.conf;
}
/**
@@ -541,7 +541,7 @@ nanddev_get_ecc_conf(struct nand_device *nand)
static inline const struct nand_ecc_props *
nanddev_get_ecc_requirements(struct nand_device *nand)
{
- return &nand->eccreq;
+ return &nand->ecc.requirements;
}
/**
@@ -554,7 +554,7 @@ static inline void
nanddev_set_ecc_requirements(struct nand_device *nand,
const struct nand_ecc_props *reqs)
{
- nand->eccreq = *reqs;
+ nand->ecc.requirements = *reqs;
}
int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 15/20] mtd: nand: Use the new generic ECC object
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Embed a generic NAND ECC high-level object in the nand_device
structure to carry all the ECC engine configuration/data.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 348fb2ad4d90..697ea2474a7c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -301,7 +301,7 @@ struct nand_ecc {
* struct nand_device - NAND device
* @mtd: MTD instance attached to the NAND device
* @memorg: memory layout
- * @eccreq: ECC requirements
+ * @ecc: NAND ECC object attached to the NAND device
* @rowconv: position to row address converter
* @bbt: bad block table info
* @ops: NAND operations attached to the NAND device
@@ -309,8 +309,8 @@ struct nand_ecc {
* Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND)
* should declare their own NAND object embedding a nand_device struct (that's
* how inheritance is done).
- * struct_nand_device->memorg and struct_nand_device->eccreq should be filled
- * at device detection time to reflect the NAND device
+ * struct_nand_device->memorg and struct_nand_device->ecc.requirements should
+ * be filled at device detection time to reflect the NAND device
* capabilities/requirements. Once this is done nanddev_init() can be called.
* It will take care of converting NAND information into MTD ones, which means
* the specialized NAND layers should never manually tweak
@@ -319,7 +319,7 @@ struct nand_ecc {
struct nand_device {
struct mtd_info mtd;
struct nand_memory_organization memorg;
- struct nand_ecc_props eccreq;
+ struct nand_ecc ecc;
struct nand_row_converter rowconv;
struct nand_bbt bbt;
const struct nand_ops *ops;
@@ -530,7 +530,7 @@ nanddev_get_memorg(struct nand_device *nand)
static inline const struct nand_ecc_props *
nanddev_get_ecc_conf(struct nand_device *nand)
{
- return &nand->eccreq;
+ return &nand->ecc.ctx.conf;
}
/**
@@ -541,7 +541,7 @@ nanddev_get_ecc_conf(struct nand_device *nand)
static inline const struct nand_ecc_props *
nanddev_get_ecc_requirements(struct nand_device *nand)
{
- return &nand->eccreq;
+ return &nand->ecc.requirements;
}
/**
@@ -554,7 +554,7 @@ static inline void
nanddev_set_ecc_requirements(struct nand_device *nand,
const struct nand_ecc_props *reqs)
{
- nand->eccreq = *reqs;
+ nand->ecc.requirements = *reqs;
}
int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 15/20] mtd: nand: Use the new generic ECC object
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Embed a generic NAND ECC high-level object in the nand_device
structure to carry all the ECC engine configuration/data.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
include/linux/mtd/nand.h | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 348fb2ad4d90..697ea2474a7c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -301,7 +301,7 @@ struct nand_ecc {
* struct nand_device - NAND device
* @mtd: MTD instance attached to the NAND device
* @memorg: memory layout
- * @eccreq: ECC requirements
+ * @ecc: NAND ECC object attached to the NAND device
* @rowconv: position to row address converter
* @bbt: bad block table info
* @ops: NAND operations attached to the NAND device
@@ -309,8 +309,8 @@ struct nand_ecc {
* Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND)
* should declare their own NAND object embedding a nand_device struct (that's
* how inheritance is done).
- * struct_nand_device->memorg and struct_nand_device->eccreq should be filled
- * at device detection time to reflect the NAND device
+ * struct_nand_device->memorg and struct_nand_device->ecc.requirements should
+ * be filled at device detection time to reflect the NAND device
* capabilities/requirements. Once this is done nanddev_init() can be called.
* It will take care of converting NAND information into MTD ones, which means
* the specialized NAND layers should never manually tweak
@@ -319,7 +319,7 @@ struct nand_ecc {
struct nand_device {
struct mtd_info mtd;
struct nand_memory_organization memorg;
- struct nand_ecc_props eccreq;
+ struct nand_ecc ecc;
struct nand_row_converter rowconv;
struct nand_bbt bbt;
const struct nand_ops *ops;
@@ -530,7 +530,7 @@ nanddev_get_memorg(struct nand_device *nand)
static inline const struct nand_ecc_props *
nanddev_get_ecc_conf(struct nand_device *nand)
{
- return &nand->eccreq;
+ return &nand->ecc.ctx.conf;
}
/**
@@ -541,7 +541,7 @@ nanddev_get_ecc_conf(struct nand_device *nand)
static inline const struct nand_ecc_props *
nanddev_get_ecc_requirements(struct nand_device *nand)
{
- return &nand->eccreq;
+ return &nand->ecc.requirements;
}
/**
@@ -554,7 +554,7 @@ static inline void
nanddev_set_ecc_requirements(struct nand_device *nand,
const struct nand_ecc_props *reqs)
{
- nand->eccreq = *reqs;
+ nand->ecc.requirements = *reqs;
}
int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 16/20] mtd: rawnand: Make use of the ECC framework
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Just enable the ECC framework with raw NAND so that we can drop, one
by one, all the unnecessary/redundant definitions.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/Kconfig | 1 +
drivers/mtd/nand/raw/nand_base.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 85280e327bfe..6ab3184ca8eb 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -13,6 +13,7 @@ config MTD_NAND_ECC_SW_HAMMING_SMC
menuconfig MTD_RAW_NAND
tristate "Raw/Parallel NAND Device Support"
select MTD_NAND_CORE
+ select MTD_NAND_ECC
select MTD_NAND_ECC_SW_HAMMING
help
This enables support for accessing all type of raw/parallel
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index d22f4243d715..aea78642d722 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -34,6 +34,7 @@
#include <linux/mm.h>
#include <linux/types.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/nand_bch.h>
#include <linux/interrupt.h>
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 16/20] mtd: rawnand: Make use of the ECC framework
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Just enable the ECC framework with raw NAND so that we can drop, one
by one, all the unnecessary/redundant definitions.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/Kconfig | 1 +
drivers/mtd/nand/raw/nand_base.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 85280e327bfe..6ab3184ca8eb 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -13,6 +13,7 @@ config MTD_NAND_ECC_SW_HAMMING_SMC
menuconfig MTD_RAW_NAND
tristate "Raw/Parallel NAND Device Support"
select MTD_NAND_CORE
+ select MTD_NAND_ECC
select MTD_NAND_ECC_SW_HAMMING
help
This enables support for accessing all type of raw/parallel
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index d22f4243d715..aea78642d722 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -34,6 +34,7 @@
#include <linux/mm.h>
#include <linux/types.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/nand_bch.h>
#include <linux/interrupt.h>
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 16/20] mtd: rawnand: Make use of the ECC framework
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Just enable the ECC framework with raw NAND so that we can drop, one
by one, all the unnecessary/redundant definitions.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/Kconfig | 1 +
drivers/mtd/nand/raw/nand_base.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 85280e327bfe..6ab3184ca8eb 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -13,6 +13,7 @@ config MTD_NAND_ECC_SW_HAMMING_SMC
menuconfig MTD_RAW_NAND
tristate "Raw/Parallel NAND Device Support"
select MTD_NAND_CORE
+ select MTD_NAND_ECC
select MTD_NAND_ECC_SW_HAMMING
help
This enables support for accessing all type of raw/parallel
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index d22f4243d715..aea78642d722 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -34,6 +34,7 @@
#include <linux/mm.h>
#include <linux/types.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/nand_bch.h>
#include <linux/interrupt.h>
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 17/20] mtd: rawnand: Use the ECC framework OOB layouts
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
No need to have our own in the raw NAND core.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/arasan-nand-controller.c | 2 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 3 +-
.../mtd/nand/raw/ingenic/ingenic_nand_drv.c | 6 +-
drivers/mtd/nand/raw/nand_base.c | 171 +-----------------
drivers/mtd/nand/raw/nand_toshiba.c | 2 +-
drivers/mtd/nand/raw/vf610_nfc.c | 2 +-
include/linux/mtd/rawnand.h | 4 +-
8 files changed, 16 insertions(+), 176 deletions(-)
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index a0b5c539ca73..6fe61393bd26 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -980,7 +980,7 @@ static int anfc_init_hw_ecc_controller(struct arasan_nfc *nfc,
return -EINVAL;
}
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
ecc->steps = mtd->writesize / ecc->size;
ecc->algo = NAND_ECC_ALGO_BCH;
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 3fba91d7991a..08df7f23b859 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1108,7 +1108,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
chip->options |= NAND_NO_SUBPAGE_WRITE;
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
return 0;
}
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 58966a9706b1..427f320fb79b 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -645,7 +645,8 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
mtd_set_ooblayout(mtd,
&hwecc4_small_ooblayout_ops);
} else if (chunks == 4 || chunks == 8) {
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd,
+ nand_get_large_page_ooblayout());
info->chip.ecc.read_page = nand_davinci_read_page_hwecc_oob_first;
} else {
return -EIO;
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
index 70309f18124c..0e9d426fe4f2 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -243,8 +243,10 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
/* For legacy reasons we use a different layout on the qi,lb60 board. */
if (of_machine_is_compatible("qi,lb60"))
mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
- else
+ else if (nfc->soc_info->oob_layout)
mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
+ else
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
return 0;
}
@@ -532,7 +534,6 @@ static const struct jz_soc_info jz4740_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00008000,
.addr_offset = 0x00010000,
- .oob_layout = &nand_ooblayout_lp_ops,
};
static const struct jz_soc_info jz4725b_soc_info = {
@@ -546,7 +547,6 @@ static const struct jz_soc_info jz4780_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00400000,
.addr_offset = 0x00800000,
- .oob_layout = &nand_ooblayout_lp_ops,
};
static const struct of_device_id ingenic_nand_dt_match[] = {
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index aea78642d722..d3e1fc944179 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -46,166 +46,6 @@
#include "internals.h"
-/* Define default oob placement schemes for large and small page devices */
-static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section > 1)
- return -ERANGE;
-
- if (!section) {
- oobregion->offset = 0;
- if (mtd->oobsize == 16)
- oobregion->length = 4;
- else
- oobregion->length = 3;
- } else {
- if (mtd->oobsize == 8)
- return -ERANGE;
-
- oobregion->offset = 6;
- oobregion->length = ecc->total - 4;
- }
-
- return 0;
-}
-
-static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- if (section > 1)
- return -ERANGE;
-
- if (mtd->oobsize == 16) {
- if (section)
- return -ERANGE;
-
- oobregion->length = 8;
- oobregion->offset = 8;
- } else {
- oobregion->length = 2;
- if (!section)
- oobregion->offset = 3;
- else
- oobregion->offset = 6;
- }
-
- return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
- .ecc = nand_ooblayout_ecc_sp,
- .free = nand_ooblayout_free_sp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
-
-static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section || !ecc->total)
- return -ERANGE;
-
- oobregion->length = ecc->total;
- oobregion->offset = mtd->oobsize - oobregion->length;
-
- return 0;
-}
-
-static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section)
- return -ERANGE;
-
- oobregion->length = mtd->oobsize - ecc->total - 2;
- oobregion->offset = 2;
-
- return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
- .ecc = nand_ooblayout_ecc_lp,
- .free = nand_ooblayout_free_lp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
-
-/*
- * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
- * are placed at a fixed offset.
- */
-static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section)
- return -ERANGE;
-
- switch (mtd->oobsize) {
- case 64:
- oobregion->offset = 40;
- break;
- case 128:
- oobregion->offset = 80;
- break;
- default:
- return -EINVAL;
- }
-
- oobregion->length = ecc->total;
- if (oobregion->offset + oobregion->length > mtd->oobsize)
- return -ERANGE;
-
- return 0;
-}
-
-static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
- int ecc_offset = 0;
-
- if (section < 0 || section > 1)
- return -ERANGE;
-
- switch (mtd->oobsize) {
- case 64:
- ecc_offset = 40;
- break;
- case 128:
- ecc_offset = 80;
- break;
- default:
- return -EINVAL;
- }
-
- if (section == 0) {
- oobregion->offset = 2;
- oobregion->length = ecc_offset - 2;
- } else {
- oobregion->offset = ecc_offset + ecc->total;
- oobregion->length = mtd->oobsize - oobregion->offset;
- }
-
- return 0;
-}
-
-static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
- .ecc = nand_ooblayout_ecc_lp_hamming,
- .free = nand_ooblayout_free_lp_hamming,
-};
-
static int nand_pairing_dist3_get_info(struct mtd_info *mtd, int page,
struct mtd_pairing_info *info)
{
@@ -5349,7 +5189,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
return -EINVAL;
}
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
}
@@ -5358,7 +5198,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
* used, otherwise we don't know how many bytes can really be
* used.
*/
- if (mtd->ooblayout == &nand_ooblayout_lp_ops &&
+ if (mtd->ooblayout == nand_get_large_page_ooblayout() &&
ecc->options & NAND_ECC_MAXIMIZE) {
int steps, bytes;
@@ -5760,11 +5600,12 @@ static int nand_scan_tail(struct nand_chip *chip)
switch (mtd->oobsize) {
case 8:
case 16:
- mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops);
+ mtd_set_ooblayout(mtd, nand_get_small_page_ooblayout());
break;
case 64:
case 128:
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_hamming_ops);
+ mtd_set_ooblayout(mtd,
+ nand_get_large_page_hamming_ooblayout());
break;
default:
/*
@@ -5776,7 +5617,7 @@ static int nand_scan_tail(struct nand_chip *chip)
*/
if (ecc->engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
mtd_set_ooblayout(mtd,
- &nand_ooblayout_lp_ops);
+ nand_get_large_page_ooblayout());
break;
}
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index 5d3434587f25..7a3c2b16ff93 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -140,7 +140,7 @@ static void toshiba_nand_benand_init(struct nand_chip *chip)
chip->options |= NAND_SUBPAGE_READ;
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
}
static void toshiba_nand_decode_id(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index 8ee2c1f539c4..50dc0c93140c 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -779,7 +779,7 @@ static int vf610_nfc_attach_chip(struct nand_chip *chip)
mtd->oobsize = 64;
/* Use default large page ECC layout defined in NAND core */
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
if (chip->ecc.strength == 32) {
nfc->ecc_mode = ECC_60_BYTE;
chip->ecc.bytes = 60;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 8f7f1cce3b4b..af02eb07207e 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -14,6 +14,7 @@
#define __LINUX_MTD_RAWNAND_H
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/flashchip.h>
#include <linux/mtd/bbm.h>
#include <linux/mtd/jedec.h>
@@ -1159,9 +1160,6 @@ struct nand_chip {
int (*unlock_area)(struct nand_chip *chip, loff_t ofs, uint64_t len);
};
-extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
-extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
-
static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
{
return container_of(mtd, struct nand_chip, base.mtd);
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 17/20] mtd: rawnand: Use the ECC framework OOB layouts
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
No need to have our own in the raw NAND core.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/arasan-nand-controller.c | 2 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 3 +-
.../mtd/nand/raw/ingenic/ingenic_nand_drv.c | 6 +-
drivers/mtd/nand/raw/nand_base.c | 171 +-----------------
drivers/mtd/nand/raw/nand_toshiba.c | 2 +-
drivers/mtd/nand/raw/vf610_nfc.c | 2 +-
include/linux/mtd/rawnand.h | 4 +-
8 files changed, 16 insertions(+), 176 deletions(-)
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index a0b5c539ca73..6fe61393bd26 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -980,7 +980,7 @@ static int anfc_init_hw_ecc_controller(struct arasan_nfc *nfc,
return -EINVAL;
}
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
ecc->steps = mtd->writesize / ecc->size;
ecc->algo = NAND_ECC_ALGO_BCH;
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 3fba91d7991a..08df7f23b859 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1108,7 +1108,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
chip->options |= NAND_NO_SUBPAGE_WRITE;
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
return 0;
}
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 58966a9706b1..427f320fb79b 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -645,7 +645,8 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
mtd_set_ooblayout(mtd,
&hwecc4_small_ooblayout_ops);
} else if (chunks == 4 || chunks == 8) {
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd,
+ nand_get_large_page_ooblayout());
info->chip.ecc.read_page = nand_davinci_read_page_hwecc_oob_first;
} else {
return -EIO;
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
index 70309f18124c..0e9d426fe4f2 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -243,8 +243,10 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
/* For legacy reasons we use a different layout on the qi,lb60 board. */
if (of_machine_is_compatible("qi,lb60"))
mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
- else
+ else if (nfc->soc_info->oob_layout)
mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
+ else
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
return 0;
}
@@ -532,7 +534,6 @@ static const struct jz_soc_info jz4740_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00008000,
.addr_offset = 0x00010000,
- .oob_layout = &nand_ooblayout_lp_ops,
};
static const struct jz_soc_info jz4725b_soc_info = {
@@ -546,7 +547,6 @@ static const struct jz_soc_info jz4780_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00400000,
.addr_offset = 0x00800000,
- .oob_layout = &nand_ooblayout_lp_ops,
};
static const struct of_device_id ingenic_nand_dt_match[] = {
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index aea78642d722..d3e1fc944179 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -46,166 +46,6 @@
#include "internals.h"
-/* Define default oob placement schemes for large and small page devices */
-static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section > 1)
- return -ERANGE;
-
- if (!section) {
- oobregion->offset = 0;
- if (mtd->oobsize == 16)
- oobregion->length = 4;
- else
- oobregion->length = 3;
- } else {
- if (mtd->oobsize == 8)
- return -ERANGE;
-
- oobregion->offset = 6;
- oobregion->length = ecc->total - 4;
- }
-
- return 0;
-}
-
-static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- if (section > 1)
- return -ERANGE;
-
- if (mtd->oobsize == 16) {
- if (section)
- return -ERANGE;
-
- oobregion->length = 8;
- oobregion->offset = 8;
- } else {
- oobregion->length = 2;
- if (!section)
- oobregion->offset = 3;
- else
- oobregion->offset = 6;
- }
-
- return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
- .ecc = nand_ooblayout_ecc_sp,
- .free = nand_ooblayout_free_sp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
-
-static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section || !ecc->total)
- return -ERANGE;
-
- oobregion->length = ecc->total;
- oobregion->offset = mtd->oobsize - oobregion->length;
-
- return 0;
-}
-
-static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section)
- return -ERANGE;
-
- oobregion->length = mtd->oobsize - ecc->total - 2;
- oobregion->offset = 2;
-
- return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
- .ecc = nand_ooblayout_ecc_lp,
- .free = nand_ooblayout_free_lp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
-
-/*
- * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
- * are placed at a fixed offset.
- */
-static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section)
- return -ERANGE;
-
- switch (mtd->oobsize) {
- case 64:
- oobregion->offset = 40;
- break;
- case 128:
- oobregion->offset = 80;
- break;
- default:
- return -EINVAL;
- }
-
- oobregion->length = ecc->total;
- if (oobregion->offset + oobregion->length > mtd->oobsize)
- return -ERANGE;
-
- return 0;
-}
-
-static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
- int ecc_offset = 0;
-
- if (section < 0 || section > 1)
- return -ERANGE;
-
- switch (mtd->oobsize) {
- case 64:
- ecc_offset = 40;
- break;
- case 128:
- ecc_offset = 80;
- break;
- default:
- return -EINVAL;
- }
-
- if (section == 0) {
- oobregion->offset = 2;
- oobregion->length = ecc_offset - 2;
- } else {
- oobregion->offset = ecc_offset + ecc->total;
- oobregion->length = mtd->oobsize - oobregion->offset;
- }
-
- return 0;
-}
-
-static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
- .ecc = nand_ooblayout_ecc_lp_hamming,
- .free = nand_ooblayout_free_lp_hamming,
-};
-
static int nand_pairing_dist3_get_info(struct mtd_info *mtd, int page,
struct mtd_pairing_info *info)
{
@@ -5349,7 +5189,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
return -EINVAL;
}
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
}
@@ -5358,7 +5198,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
* used, otherwise we don't know how many bytes can really be
* used.
*/
- if (mtd->ooblayout == &nand_ooblayout_lp_ops &&
+ if (mtd->ooblayout == nand_get_large_page_ooblayout() &&
ecc->options & NAND_ECC_MAXIMIZE) {
int steps, bytes;
@@ -5760,11 +5600,12 @@ static int nand_scan_tail(struct nand_chip *chip)
switch (mtd->oobsize) {
case 8:
case 16:
- mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops);
+ mtd_set_ooblayout(mtd, nand_get_small_page_ooblayout());
break;
case 64:
case 128:
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_hamming_ops);
+ mtd_set_ooblayout(mtd,
+ nand_get_large_page_hamming_ooblayout());
break;
default:
/*
@@ -5776,7 +5617,7 @@ static int nand_scan_tail(struct nand_chip *chip)
*/
if (ecc->engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
mtd_set_ooblayout(mtd,
- &nand_ooblayout_lp_ops);
+ nand_get_large_page_ooblayout());
break;
}
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index 5d3434587f25..7a3c2b16ff93 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -140,7 +140,7 @@ static void toshiba_nand_benand_init(struct nand_chip *chip)
chip->options |= NAND_SUBPAGE_READ;
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
}
static void toshiba_nand_decode_id(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index 8ee2c1f539c4..50dc0c93140c 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -779,7 +779,7 @@ static int vf610_nfc_attach_chip(struct nand_chip *chip)
mtd->oobsize = 64;
/* Use default large page ECC layout defined in NAND core */
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
if (chip->ecc.strength == 32) {
nfc->ecc_mode = ECC_60_BYTE;
chip->ecc.bytes = 60;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 8f7f1cce3b4b..af02eb07207e 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -14,6 +14,7 @@
#define __LINUX_MTD_RAWNAND_H
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/flashchip.h>
#include <linux/mtd/bbm.h>
#include <linux/mtd/jedec.h>
@@ -1159,9 +1160,6 @@ struct nand_chip {
int (*unlock_area)(struct nand_chip *chip, loff_t ofs, uint64_t len);
};
-extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
-extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
-
static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
{
return container_of(mtd, struct nand_chip, base.mtd);
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 17/20] mtd: rawnand: Use the ECC framework OOB layouts
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
No need to have our own in the raw NAND core.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/arasan-nand-controller.c | 2 +-
drivers/mtd/nand/raw/atmel/nand-controller.c | 2 +-
drivers/mtd/nand/raw/davinci_nand.c | 3 +-
.../mtd/nand/raw/ingenic/ingenic_nand_drv.c | 6 +-
drivers/mtd/nand/raw/nand_base.c | 171 +-----------------
drivers/mtd/nand/raw/nand_toshiba.c | 2 +-
drivers/mtd/nand/raw/vf610_nfc.c | 2 +-
include/linux/mtd/rawnand.h | 4 +-
8 files changed, 16 insertions(+), 176 deletions(-)
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index a0b5c539ca73..6fe61393bd26 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -980,7 +980,7 @@ static int anfc_init_hw_ecc_controller(struct arasan_nfc *nfc,
return -EINVAL;
}
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
ecc->steps = mtd->writesize / ecc->size;
ecc->algo = NAND_ECC_ALGO_BCH;
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 3fba91d7991a..08df7f23b859 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1108,7 +1108,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
chip->options |= NAND_NO_SUBPAGE_WRITE;
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
return 0;
}
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index 58966a9706b1..427f320fb79b 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -645,7 +645,8 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
mtd_set_ooblayout(mtd,
&hwecc4_small_ooblayout_ops);
} else if (chunks == 4 || chunks == 8) {
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd,
+ nand_get_large_page_ooblayout());
info->chip.ecc.read_page = nand_davinci_read_page_hwecc_oob_first;
} else {
return -EIO;
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
index 70309f18124c..0e9d426fe4f2 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -243,8 +243,10 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
/* For legacy reasons we use a different layout on the qi,lb60 board. */
if (of_machine_is_compatible("qi,lb60"))
mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
- else
+ else if (nfc->soc_info->oob_layout)
mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
+ else
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
return 0;
}
@@ -532,7 +534,6 @@ static const struct jz_soc_info jz4740_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00008000,
.addr_offset = 0x00010000,
- .oob_layout = &nand_ooblayout_lp_ops,
};
static const struct jz_soc_info jz4725b_soc_info = {
@@ -546,7 +547,6 @@ static const struct jz_soc_info jz4780_soc_info = {
.data_offset = 0x00000000,
.cmd_offset = 0x00400000,
.addr_offset = 0x00800000,
- .oob_layout = &nand_ooblayout_lp_ops,
};
static const struct of_device_id ingenic_nand_dt_match[] = {
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index aea78642d722..d3e1fc944179 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -46,166 +46,6 @@
#include "internals.h"
-/* Define default oob placement schemes for large and small page devices */
-static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section > 1)
- return -ERANGE;
-
- if (!section) {
- oobregion->offset = 0;
- if (mtd->oobsize == 16)
- oobregion->length = 4;
- else
- oobregion->length = 3;
- } else {
- if (mtd->oobsize == 8)
- return -ERANGE;
-
- oobregion->offset = 6;
- oobregion->length = ecc->total - 4;
- }
-
- return 0;
-}
-
-static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- if (section > 1)
- return -ERANGE;
-
- if (mtd->oobsize == 16) {
- if (section)
- return -ERANGE;
-
- oobregion->length = 8;
- oobregion->offset = 8;
- } else {
- oobregion->length = 2;
- if (!section)
- oobregion->offset = 3;
- else
- oobregion->offset = 6;
- }
-
- return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
- .ecc = nand_ooblayout_ecc_sp,
- .free = nand_ooblayout_free_sp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
-
-static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section || !ecc->total)
- return -ERANGE;
-
- oobregion->length = ecc->total;
- oobregion->offset = mtd->oobsize - oobregion->length;
-
- return 0;
-}
-
-static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section)
- return -ERANGE;
-
- oobregion->length = mtd->oobsize - ecc->total - 2;
- oobregion->offset = 2;
-
- return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
- .ecc = nand_ooblayout_ecc_lp,
- .free = nand_ooblayout_free_lp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
-
-/*
- * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
- * are placed at a fixed offset.
- */
-static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
-
- if (section)
- return -ERANGE;
-
- switch (mtd->oobsize) {
- case 64:
- oobregion->offset = 40;
- break;
- case 128:
- oobregion->offset = 80;
- break;
- default:
- return -EINVAL;
- }
-
- oobregion->length = ecc->total;
- if (oobregion->offset + oobregion->length > mtd->oobsize)
- return -ERANGE;
-
- return 0;
-}
-
-static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- struct nand_chip *chip = mtd_to_nand(mtd);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
- int ecc_offset = 0;
-
- if (section < 0 || section > 1)
- return -ERANGE;
-
- switch (mtd->oobsize) {
- case 64:
- ecc_offset = 40;
- break;
- case 128:
- ecc_offset = 80;
- break;
- default:
- return -EINVAL;
- }
-
- if (section == 0) {
- oobregion->offset = 2;
- oobregion->length = ecc_offset - 2;
- } else {
- oobregion->offset = ecc_offset + ecc->total;
- oobregion->length = mtd->oobsize - oobregion->offset;
- }
-
- return 0;
-}
-
-static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
- .ecc = nand_ooblayout_ecc_lp_hamming,
- .free = nand_ooblayout_free_lp_hamming,
-};
-
static int nand_pairing_dist3_get_info(struct mtd_info *mtd, int page,
struct mtd_pairing_info *info)
{
@@ -5349,7 +5189,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
return -EINVAL;
}
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
}
@@ -5358,7 +5198,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
* used, otherwise we don't know how many bytes can really be
* used.
*/
- if (mtd->ooblayout == &nand_ooblayout_lp_ops &&
+ if (mtd->ooblayout == nand_get_large_page_ooblayout() &&
ecc->options & NAND_ECC_MAXIMIZE) {
int steps, bytes;
@@ -5760,11 +5600,12 @@ static int nand_scan_tail(struct nand_chip *chip)
switch (mtd->oobsize) {
case 8:
case 16:
- mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops);
+ mtd_set_ooblayout(mtd, nand_get_small_page_ooblayout());
break;
case 64:
case 128:
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_hamming_ops);
+ mtd_set_ooblayout(mtd,
+ nand_get_large_page_hamming_ooblayout());
break;
default:
/*
@@ -5776,7 +5617,7 @@ static int nand_scan_tail(struct nand_chip *chip)
*/
if (ecc->engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
mtd_set_ooblayout(mtd,
- &nand_ooblayout_lp_ops);
+ nand_get_large_page_ooblayout());
break;
}
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index 5d3434587f25..7a3c2b16ff93 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -140,7 +140,7 @@ static void toshiba_nand_benand_init(struct nand_chip *chip)
chip->options |= NAND_SUBPAGE_READ;
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
}
static void toshiba_nand_decode_id(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index 8ee2c1f539c4..50dc0c93140c 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -779,7 +779,7 @@ static int vf610_nfc_attach_chip(struct nand_chip *chip)
mtd->oobsize = 64;
/* Use default large page ECC layout defined in NAND core */
- mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+ mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
if (chip->ecc.strength == 32) {
nfc->ecc_mode = ECC_60_BYTE;
chip->ecc.bytes = 60;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 8f7f1cce3b4b..af02eb07207e 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -14,6 +14,7 @@
#define __LINUX_MTD_RAWNAND_H
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/flashchip.h>
#include <linux/mtd/bbm.h>
#include <linux/mtd/jedec.h>
@@ -1159,9 +1160,6 @@ struct nand_chip {
int (*unlock_area)(struct nand_chip *chip, loff_t ofs, uint64_t len);
};
-extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
-extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
-
static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
{
return container_of(mtd, struct nand_chip, base.mtd);
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 18/20] mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helper
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Plus, the new helper has a more "english" name.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/nand_base.c | 39 +-------------------------------
1 file changed, 1 insertion(+), 38 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index d3e1fc944179..c69d60f791d0 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5471,43 +5471,6 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
}
EXPORT_SYMBOL_GPL(nand_ecc_choose_conf);
-/*
- * Check if the chip configuration meet the datasheet requirements.
-
- * If our configuration corrects A bits per B bytes and the minimum
- * required correction level is X bits per Y bytes, then we must ensure
- * both of the following are true:
- *
- * (1) A / B >= X / Y
- * (2) A >= X
- *
- * Requirement (1) ensures we can correct for the required bitflip density.
- * Requirement (2) ensures we can correct even when all bitflips are clumped
- * in the same sector.
- */
-static bool nand_ecc_strength_good(struct nand_chip *chip)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
- const struct nand_ecc_props *requirements =
- nanddev_get_ecc_requirements(&chip->base);
- int corr, ds_corr;
-
- if (ecc->size == 0 || requirements->step_size == 0)
- /* Not enough information */
- return true;
-
- /*
- * We get the number of corrected bits per page to compare
- * the correction density.
- */
- corr = (mtd->writesize * ecc->strength) / ecc->size;
- ds_corr = (mtd->writesize * requirements->strength) /
- requirements->step_size;
-
- return corr >= ds_corr && ecc->strength >= requirements->strength;
-}
-
static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
{
struct nand_chip *chip = container_of(nand, struct nand_chip,
@@ -5790,7 +5753,7 @@ static int nand_scan_tail(struct nand_chip *chip)
mtd->oobavail = ret;
/* ECC sanity check: warn if it's too weak */
- if (!nand_ecc_strength_good(chip))
+ if (!nand_ecc_is_strong_enough(&chip->base))
pr_warn("WARNING: %s: the ECC used on your system (%db/%dB) is too weak compared to the one required by the NAND chip (%db/%dB)\n",
mtd->name, chip->ecc.strength, chip->ecc.size,
nanddev_get_ecc_requirements(&chip->base)->strength,
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 18/20] mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helper
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Plus, the new helper has a more "english" name.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/nand_base.c | 39 +-------------------------------
1 file changed, 1 insertion(+), 38 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index d3e1fc944179..c69d60f791d0 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5471,43 +5471,6 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
}
EXPORT_SYMBOL_GPL(nand_ecc_choose_conf);
-/*
- * Check if the chip configuration meet the datasheet requirements.
-
- * If our configuration corrects A bits per B bytes and the minimum
- * required correction level is X bits per Y bytes, then we must ensure
- * both of the following are true:
- *
- * (1) A / B >= X / Y
- * (2) A >= X
- *
- * Requirement (1) ensures we can correct for the required bitflip density.
- * Requirement (2) ensures we can correct even when all bitflips are clumped
- * in the same sector.
- */
-static bool nand_ecc_strength_good(struct nand_chip *chip)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
- const struct nand_ecc_props *requirements =
- nanddev_get_ecc_requirements(&chip->base);
- int corr, ds_corr;
-
- if (ecc->size == 0 || requirements->step_size == 0)
- /* Not enough information */
- return true;
-
- /*
- * We get the number of corrected bits per page to compare
- * the correction density.
- */
- corr = (mtd->writesize * ecc->strength) / ecc->size;
- ds_corr = (mtd->writesize * requirements->strength) /
- requirements->step_size;
-
- return corr >= ds_corr && ecc->strength >= requirements->strength;
-}
-
static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
{
struct nand_chip *chip = container_of(nand, struct nand_chip,
@@ -5790,7 +5753,7 @@ static int nand_scan_tail(struct nand_chip *chip)
mtd->oobavail = ret;
/* ECC sanity check: warn if it's too weak */
- if (!nand_ecc_strength_good(chip))
+ if (!nand_ecc_is_strong_enough(&chip->base))
pr_warn("WARNING: %s: the ECC used on your system (%db/%dB) is too weak compared to the one required by the NAND chip (%db/%dB)\n",
mtd->name, chip->ecc.strength, chip->ecc.size,
nanddev_get_ecc_requirements(&chip->base)->strength,
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 18/20] mtd: rawnand: Use the ECC framework nand_ecc_is_strong_enough() helper
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Plus, the new helper has a more "english" name.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/nand_base.c | 39 +-------------------------------
1 file changed, 1 insertion(+), 38 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index d3e1fc944179..c69d60f791d0 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -5471,43 +5471,6 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
}
EXPORT_SYMBOL_GPL(nand_ecc_choose_conf);
-/*
- * Check if the chip configuration meet the datasheet requirements.
-
- * If our configuration corrects A bits per B bytes and the minimum
- * required correction level is X bits per Y bytes, then we must ensure
- * both of the following are true:
- *
- * (1) A / B >= X / Y
- * (2) A >= X
- *
- * Requirement (1) ensures we can correct for the required bitflip density.
- * Requirement (2) ensures we can correct even when all bitflips are clumped
- * in the same sector.
- */
-static bool nand_ecc_strength_good(struct nand_chip *chip)
-{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct nand_ecc_ctrl *ecc = &chip->ecc;
- const struct nand_ecc_props *requirements =
- nanddev_get_ecc_requirements(&chip->base);
- int corr, ds_corr;
-
- if (ecc->size == 0 || requirements->step_size == 0)
- /* Not enough information */
- return true;
-
- /*
- * We get the number of corrected bits per page to compare
- * the correction density.
- */
- corr = (mtd->writesize * ecc->strength) / ecc->size;
- ds_corr = (mtd->writesize * requirements->strength) /
- requirements->step_size;
-
- return corr >= ds_corr && ecc->strength >= requirements->strength;
-}
-
static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
{
struct nand_chip *chip = container_of(nand, struct nand_chip,
@@ -5790,7 +5753,7 @@ static int nand_scan_tail(struct nand_chip *chip)
mtd->oobavail = ret;
/* ECC sanity check: warn if it's too weak */
- if (!nand_ecc_strength_good(chip))
+ if (!nand_ecc_is_strong_enough(&chip->base))
pr_warn("WARNING: %s: the ECC used on your system (%db/%dB) is too weak compared to the one required by the NAND chip (%db/%dB)\n",
mtd->name, chip->ecc.strength, chip->ecc.size,
nanddev_get_ecc_requirements(&chip->base)->strength,
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 19/20] mtd: rawnand: Use the ECC framework user input parsing bits
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Many helpers are generic to all NAND chips, they should not be
raw-NAND specific, so use the generic ones.
To avoid moving all the raw NAND core "history" into the generic NAND
layer, we keep a part of this parsing in the raw NAND core to ensure
backward compatibility.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/nand_base.c | 144 +++++++++++++++----------------
include/linux/mtd/rawnand.h | 12 ---
2 files changed, 71 insertions(+), 85 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index c69d60f791d0..53e07f25ae65 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4854,18 +4854,27 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
return ret;
}
-static const char * const nand_ecc_modes[] = {
- [NAND_ECC_NONE] = "none",
- [NAND_ECC_SOFT] = "soft",
- [NAND_ECC_HW] = "hw",
- [NAND_ECC_HW_SYNDROME] = "hw_syndrome",
- [NAND_ECC_ON_DIE] = "on-die",
-};
-
static enum nand_ecc_engine_type
-of_get_nand_ecc_engine_type(struct device_node *np)
+of_get_rawnand_ecc_engine_type_legacy(struct device_node *np)
{
- enum nand_ecc_mode eng_type;
+ enum nand_ecc_legacy_mode {
+ NAND_ECC_INVALID,
+ NAND_ECC_NONE,
+ NAND_ECC_SOFT,
+ NAND_ECC_SOFT_BCH,
+ NAND_ECC_HW,
+ NAND_ECC_HW_SYNDROME,
+ NAND_ECC_ON_DIE,
+ };
+ const char * const nand_ecc_legacy_modes[] = {
+ [NAND_ECC_NONE] = "none",
+ [NAND_ECC_SOFT] = "soft",
+ [NAND_ECC_SOFT_BCH] = "soft_bch",
+ [NAND_ECC_HW] = "hw",
+ [NAND_ECC_HW_SYNDROME] = "hw_syndrome",
+ [NAND_ECC_ON_DIE] = "on-die",
+ };
+ enum nand_ecc_legacy_mode eng_type;
const char *pm;
int err;
@@ -4874,12 +4883,13 @@ of_get_nand_ecc_engine_type(struct device_node *np)
return NAND_ECC_ENGINE_TYPE_INVALID;
for (eng_type = NAND_ECC_NONE;
- eng_type < ARRAY_SIZE(nand_ecc_modes); eng_type++) {
- if (!strcasecmp(pm, nand_ecc_modes[eng_type])) {
+ eng_type < ARRAY_SIZE(nand_ecc_legacy_modes); eng_type++) {
+ if (!strcasecmp(pm, nand_ecc_legacy_modes[eng_type])) {
switch (eng_type) {
case NAND_ECC_NONE:
return NAND_ECC_ENGINE_TYPE_NONE;
case NAND_ECC_SOFT:
+ case NAND_ECC_SOFT_BCH:
return NAND_ECC_ENGINE_TYPE_SOFT;
case NAND_ECC_HW:
case NAND_ECC_HW_SYNDROME:
@@ -4892,43 +4902,29 @@ of_get_nand_ecc_engine_type(struct device_node *np)
}
}
- /*
- * For backward compatibility we support few obsoleted values that don't
- * have their mappings into the nand_ecc_engine_providers enum anymore
- * (they were merged with other enums).
- */
- if (!strcasecmp(pm, "soft_bch"))
- return NAND_ECC_ENGINE_TYPE_SOFT;
-
return NAND_ECC_ENGINE_TYPE_INVALID;
}
-static const char * const nand_ecc_algos[] = {
- [NAND_ECC_ALGO_HAMMING] = "hamming",
- [NAND_ECC_ALGO_BCH] = "bch",
- [NAND_ECC_ALGO_RS] = "rs",
-};
-
-static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
+enum nand_ecc_placement
+of_get_rawnand_ecc_placement_legacy(struct device_node *np)
{
- enum nand_ecc_algo ecc_algo;
const char *pm;
int err;
- err = of_property_read_string(np, "nand-ecc-algo", &pm);
+ err = of_property_read_string(np, "nand-ecc-mode", &pm);
if (!err) {
- for (ecc_algo = NAND_ECC_ALGO_HAMMING;
- ecc_algo < ARRAY_SIZE(nand_ecc_algos);
- ecc_algo++) {
- if (!strcasecmp(pm, nand_ecc_algos[ecc_algo]))
- return ecc_algo;
- }
+ if (!strcasecmp(pm, "hw_syndrome"))
+ return NAND_ECC_PLACEMENT_INTERLEAVED;
}
- /*
- * For backward compatibility we also read "nand-ecc-mode" checking
- * for some obsoleted values that were specifying ECC algorithm.
- */
+ return NAND_ECC_PLACEMENT_UNKNOWN;
+}
+
+static enum nand_ecc_algo of_get_rawnand_ecc_algo_legacy(struct device_node *np)
+{
+ const char *pm;
+ int err;
+
err = of_property_read_string(np, "nand-ecc-mode", &pm);
if (!err) {
if (!strcasecmp(pm, "soft"))
@@ -4940,22 +4936,19 @@ static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
return NAND_ECC_ALGO_UNKNOWN;
}
-static int of_get_nand_ecc_step_size(struct device_node *np)
+static void of_get_nand_ecc_legacy_user_config(struct nand_chip *chip)
{
- int ret;
- u32 val;
+ struct device_node *dn = nand_get_flash_node(chip);
+ struct nand_ecc_props *user_conf = &chip->base.ecc.user_conf;
- ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
- return ret ? ret : val;
-}
+ if (user_conf->engine_type != NAND_ECC_ENGINE_TYPE_INVALID)
+ user_conf->engine_type = of_get_rawnand_ecc_engine_type_legacy(dn);
-static int of_get_nand_ecc_strength(struct device_node *np)
-{
- int ret;
- u32 val;
+ if (user_conf->algo != NAND_ECC_ALGO_UNKNOWN)
+ user_conf->algo = of_get_rawnand_ecc_algo_legacy(dn);
- ret = of_property_read_u32(np, "nand-ecc-strength", &val);
- return ret ? ret : val;
+ if (user_conf->placement != NAND_ECC_PLACEMENT_UNKNOWN)
+ user_conf->placement = of_get_rawnand_ecc_placement_legacy(dn);
}
static int of_get_nand_bus_width(struct device_node *np)
@@ -4979,12 +4972,10 @@ static bool of_get_nand_on_flash_bbt(struct device_node *np)
return of_property_read_bool(np, "nand-on-flash-bbt");
}
-static int nand_dt_init(struct nand_chip *chip)
+static int rawnand_dt_init(struct nand_chip *chip)
{
+ struct nand_device *nand = mtd_to_nanddev(nand_to_mtd(chip));
struct device_node *dn = nand_get_flash_node(chip);
- enum nand_ecc_engine_type ecc_type;
- enum nand_ecc_algo ecc_algo;
- int ecc_strength, ecc_step;
if (!dn)
return 0;
@@ -4998,26 +4989,33 @@ static int nand_dt_init(struct nand_chip *chip)
if (of_get_nand_on_flash_bbt(dn))
chip->bbt_options |= NAND_BBT_USE_FLASH;
- ecc_type = of_get_nand_ecc_engine_type(dn);
- ecc_algo = of_get_nand_ecc_algo(dn);
- ecc_strength = of_get_nand_ecc_strength(dn);
- ecc_step = of_get_nand_ecc_step_size(dn);
-
- if (ecc_type != NAND_ECC_ENGINE_TYPE_INVALID)
- chip->ecc.engine_type = ecc_type;
-
- if (ecc_algo != NAND_ECC_ALGO_UNKNOWN)
- chip->ecc.algo = ecc_algo;
-
- if (ecc_strength >= 0)
- chip->ecc.strength = ecc_strength;
-
- if (ecc_step > 0)
- chip->ecc.size = ecc_step;
-
if (of_property_read_bool(dn, "nand-ecc-maximize"))
chip->ecc.options |= NAND_ECC_MAXIMIZE;
+ of_get_nand_ecc_user_config(nand);
+ of_get_nand_ecc_legacy_user_config(chip);
+
+ /*
+ * If neither the user nor the NAND controller have requested a specific
+ * ECC engine type, we will default to NAND_ECC_ENGINE_TYPE_ON_HOST.
+ */
+ nand->ecc.defaults.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+
+ /*
+ * Use the user requested engine type, unless there is none, in this
+ * case default to the NAND controller choice, otherwise fallback to
+ * the raw NAND default one.
+ */
+ if (nand->ecc.user_conf.engine_type != NAND_ECC_ENGINE_TYPE_INVALID)
+ chip->ecc.engine_type = nand->ecc.user_conf.engine_type;
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_INVALID)
+ chip->ecc.engine_type = nand->ecc.defaults.engine_type;
+
+ chip->ecc.placement = nand->ecc.user_conf.placement;
+ chip->ecc.algo = nand->ecc.user_conf.algo;
+ chip->ecc.strength = nand->ecc.user_conf.strength;
+ chip->ecc.size = nand->ecc.user_conf.step_size;
+
return 0;
}
@@ -5054,7 +5052,7 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
/* Enforce the right timings for reset/detection */
onfi_fill_data_interface(chip, NAND_SDR_IFACE, 0);
- ret = nand_dt_init(chip);
+ ret = rawnand_dt_init(chip);
if (ret)
return ret;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index af02eb07207e..66f69a1d27a5 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -81,18 +81,6 @@ struct nand_chip;
#define NAND_DATA_IFACE_CHECK_ONLY -1
-/*
- * Constants for ECC_MODES
- */
-enum nand_ecc_mode {
- NAND_ECC_INVALID,
- NAND_ECC_NONE,
- NAND_ECC_SOFT,
- NAND_ECC_HW,
- NAND_ECC_HW_SYNDROME,
- NAND_ECC_ON_DIE,
-};
-
/*
* Constants for Hardware ECC
*/
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 19/20] mtd: rawnand: Use the ECC framework user input parsing bits
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Many helpers are generic to all NAND chips, they should not be
raw-NAND specific, so use the generic ones.
To avoid moving all the raw NAND core "history" into the generic NAND
layer, we keep a part of this parsing in the raw NAND core to ensure
backward compatibility.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/nand_base.c | 144 +++++++++++++++----------------
include/linux/mtd/rawnand.h | 12 ---
2 files changed, 71 insertions(+), 85 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index c69d60f791d0..53e07f25ae65 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4854,18 +4854,27 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
return ret;
}
-static const char * const nand_ecc_modes[] = {
- [NAND_ECC_NONE] = "none",
- [NAND_ECC_SOFT] = "soft",
- [NAND_ECC_HW] = "hw",
- [NAND_ECC_HW_SYNDROME] = "hw_syndrome",
- [NAND_ECC_ON_DIE] = "on-die",
-};
-
static enum nand_ecc_engine_type
-of_get_nand_ecc_engine_type(struct device_node *np)
+of_get_rawnand_ecc_engine_type_legacy(struct device_node *np)
{
- enum nand_ecc_mode eng_type;
+ enum nand_ecc_legacy_mode {
+ NAND_ECC_INVALID,
+ NAND_ECC_NONE,
+ NAND_ECC_SOFT,
+ NAND_ECC_SOFT_BCH,
+ NAND_ECC_HW,
+ NAND_ECC_HW_SYNDROME,
+ NAND_ECC_ON_DIE,
+ };
+ const char * const nand_ecc_legacy_modes[] = {
+ [NAND_ECC_NONE] = "none",
+ [NAND_ECC_SOFT] = "soft",
+ [NAND_ECC_SOFT_BCH] = "soft_bch",
+ [NAND_ECC_HW] = "hw",
+ [NAND_ECC_HW_SYNDROME] = "hw_syndrome",
+ [NAND_ECC_ON_DIE] = "on-die",
+ };
+ enum nand_ecc_legacy_mode eng_type;
const char *pm;
int err;
@@ -4874,12 +4883,13 @@ of_get_nand_ecc_engine_type(struct device_node *np)
return NAND_ECC_ENGINE_TYPE_INVALID;
for (eng_type = NAND_ECC_NONE;
- eng_type < ARRAY_SIZE(nand_ecc_modes); eng_type++) {
- if (!strcasecmp(pm, nand_ecc_modes[eng_type])) {
+ eng_type < ARRAY_SIZE(nand_ecc_legacy_modes); eng_type++) {
+ if (!strcasecmp(pm, nand_ecc_legacy_modes[eng_type])) {
switch (eng_type) {
case NAND_ECC_NONE:
return NAND_ECC_ENGINE_TYPE_NONE;
case NAND_ECC_SOFT:
+ case NAND_ECC_SOFT_BCH:
return NAND_ECC_ENGINE_TYPE_SOFT;
case NAND_ECC_HW:
case NAND_ECC_HW_SYNDROME:
@@ -4892,43 +4902,29 @@ of_get_nand_ecc_engine_type(struct device_node *np)
}
}
- /*
- * For backward compatibility we support few obsoleted values that don't
- * have their mappings into the nand_ecc_engine_providers enum anymore
- * (they were merged with other enums).
- */
- if (!strcasecmp(pm, "soft_bch"))
- return NAND_ECC_ENGINE_TYPE_SOFT;
-
return NAND_ECC_ENGINE_TYPE_INVALID;
}
-static const char * const nand_ecc_algos[] = {
- [NAND_ECC_ALGO_HAMMING] = "hamming",
- [NAND_ECC_ALGO_BCH] = "bch",
- [NAND_ECC_ALGO_RS] = "rs",
-};
-
-static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
+enum nand_ecc_placement
+of_get_rawnand_ecc_placement_legacy(struct device_node *np)
{
- enum nand_ecc_algo ecc_algo;
const char *pm;
int err;
- err = of_property_read_string(np, "nand-ecc-algo", &pm);
+ err = of_property_read_string(np, "nand-ecc-mode", &pm);
if (!err) {
- for (ecc_algo = NAND_ECC_ALGO_HAMMING;
- ecc_algo < ARRAY_SIZE(nand_ecc_algos);
- ecc_algo++) {
- if (!strcasecmp(pm, nand_ecc_algos[ecc_algo]))
- return ecc_algo;
- }
+ if (!strcasecmp(pm, "hw_syndrome"))
+ return NAND_ECC_PLACEMENT_INTERLEAVED;
}
- /*
- * For backward compatibility we also read "nand-ecc-mode" checking
- * for some obsoleted values that were specifying ECC algorithm.
- */
+ return NAND_ECC_PLACEMENT_UNKNOWN;
+}
+
+static enum nand_ecc_algo of_get_rawnand_ecc_algo_legacy(struct device_node *np)
+{
+ const char *pm;
+ int err;
+
err = of_property_read_string(np, "nand-ecc-mode", &pm);
if (!err) {
if (!strcasecmp(pm, "soft"))
@@ -4940,22 +4936,19 @@ static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
return NAND_ECC_ALGO_UNKNOWN;
}
-static int of_get_nand_ecc_step_size(struct device_node *np)
+static void of_get_nand_ecc_legacy_user_config(struct nand_chip *chip)
{
- int ret;
- u32 val;
+ struct device_node *dn = nand_get_flash_node(chip);
+ struct nand_ecc_props *user_conf = &chip->base.ecc.user_conf;
- ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
- return ret ? ret : val;
-}
+ if (user_conf->engine_type != NAND_ECC_ENGINE_TYPE_INVALID)
+ user_conf->engine_type = of_get_rawnand_ecc_engine_type_legacy(dn);
-static int of_get_nand_ecc_strength(struct device_node *np)
-{
- int ret;
- u32 val;
+ if (user_conf->algo != NAND_ECC_ALGO_UNKNOWN)
+ user_conf->algo = of_get_rawnand_ecc_algo_legacy(dn);
- ret = of_property_read_u32(np, "nand-ecc-strength", &val);
- return ret ? ret : val;
+ if (user_conf->placement != NAND_ECC_PLACEMENT_UNKNOWN)
+ user_conf->placement = of_get_rawnand_ecc_placement_legacy(dn);
}
static int of_get_nand_bus_width(struct device_node *np)
@@ -4979,12 +4972,10 @@ static bool of_get_nand_on_flash_bbt(struct device_node *np)
return of_property_read_bool(np, "nand-on-flash-bbt");
}
-static int nand_dt_init(struct nand_chip *chip)
+static int rawnand_dt_init(struct nand_chip *chip)
{
+ struct nand_device *nand = mtd_to_nanddev(nand_to_mtd(chip));
struct device_node *dn = nand_get_flash_node(chip);
- enum nand_ecc_engine_type ecc_type;
- enum nand_ecc_algo ecc_algo;
- int ecc_strength, ecc_step;
if (!dn)
return 0;
@@ -4998,26 +4989,33 @@ static int nand_dt_init(struct nand_chip *chip)
if (of_get_nand_on_flash_bbt(dn))
chip->bbt_options |= NAND_BBT_USE_FLASH;
- ecc_type = of_get_nand_ecc_engine_type(dn);
- ecc_algo = of_get_nand_ecc_algo(dn);
- ecc_strength = of_get_nand_ecc_strength(dn);
- ecc_step = of_get_nand_ecc_step_size(dn);
-
- if (ecc_type != NAND_ECC_ENGINE_TYPE_INVALID)
- chip->ecc.engine_type = ecc_type;
-
- if (ecc_algo != NAND_ECC_ALGO_UNKNOWN)
- chip->ecc.algo = ecc_algo;
-
- if (ecc_strength >= 0)
- chip->ecc.strength = ecc_strength;
-
- if (ecc_step > 0)
- chip->ecc.size = ecc_step;
-
if (of_property_read_bool(dn, "nand-ecc-maximize"))
chip->ecc.options |= NAND_ECC_MAXIMIZE;
+ of_get_nand_ecc_user_config(nand);
+ of_get_nand_ecc_legacy_user_config(chip);
+
+ /*
+ * If neither the user nor the NAND controller have requested a specific
+ * ECC engine type, we will default to NAND_ECC_ENGINE_TYPE_ON_HOST.
+ */
+ nand->ecc.defaults.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+
+ /*
+ * Use the user requested engine type, unless there is none, in this
+ * case default to the NAND controller choice, otherwise fallback to
+ * the raw NAND default one.
+ */
+ if (nand->ecc.user_conf.engine_type != NAND_ECC_ENGINE_TYPE_INVALID)
+ chip->ecc.engine_type = nand->ecc.user_conf.engine_type;
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_INVALID)
+ chip->ecc.engine_type = nand->ecc.defaults.engine_type;
+
+ chip->ecc.placement = nand->ecc.user_conf.placement;
+ chip->ecc.algo = nand->ecc.user_conf.algo;
+ chip->ecc.strength = nand->ecc.user_conf.strength;
+ chip->ecc.size = nand->ecc.user_conf.step_size;
+
return 0;
}
@@ -5054,7 +5052,7 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
/* Enforce the right timings for reset/detection */
onfi_fill_data_interface(chip, NAND_SDR_IFACE, 0);
- ret = nand_dt_init(chip);
+ ret = rawnand_dt_init(chip);
if (ret)
return ret;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index af02eb07207e..66f69a1d27a5 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -81,18 +81,6 @@ struct nand_chip;
#define NAND_DATA_IFACE_CHECK_ONLY -1
-/*
- * Constants for ECC_MODES
- */
-enum nand_ecc_mode {
- NAND_ECC_INVALID,
- NAND_ECC_NONE,
- NAND_ECC_SOFT,
- NAND_ECC_HW,
- NAND_ECC_HW_SYNDROME,
- NAND_ECC_ON_DIE,
-};
-
/*
* Constants for Hardware ECC
*/
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 19/20] mtd: rawnand: Use the ECC framework user input parsing bits
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Many helpers are generic to all NAND chips, they should not be
raw-NAND specific, so use the generic ones.
To avoid moving all the raw NAND core "history" into the generic NAND
layer, we keep a part of this parsing in the raw NAND core to ensure
backward compatibility.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/nand_base.c | 144 +++++++++++++++----------------
include/linux/mtd/rawnand.h | 12 ---
2 files changed, 71 insertions(+), 85 deletions(-)
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index c69d60f791d0..53e07f25ae65 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4854,18 +4854,27 @@ static int nand_detect(struct nand_chip *chip, struct nand_flash_dev *type)
return ret;
}
-static const char * const nand_ecc_modes[] = {
- [NAND_ECC_NONE] = "none",
- [NAND_ECC_SOFT] = "soft",
- [NAND_ECC_HW] = "hw",
- [NAND_ECC_HW_SYNDROME] = "hw_syndrome",
- [NAND_ECC_ON_DIE] = "on-die",
-};
-
static enum nand_ecc_engine_type
-of_get_nand_ecc_engine_type(struct device_node *np)
+of_get_rawnand_ecc_engine_type_legacy(struct device_node *np)
{
- enum nand_ecc_mode eng_type;
+ enum nand_ecc_legacy_mode {
+ NAND_ECC_INVALID,
+ NAND_ECC_NONE,
+ NAND_ECC_SOFT,
+ NAND_ECC_SOFT_BCH,
+ NAND_ECC_HW,
+ NAND_ECC_HW_SYNDROME,
+ NAND_ECC_ON_DIE,
+ };
+ const char * const nand_ecc_legacy_modes[] = {
+ [NAND_ECC_NONE] = "none",
+ [NAND_ECC_SOFT] = "soft",
+ [NAND_ECC_SOFT_BCH] = "soft_bch",
+ [NAND_ECC_HW] = "hw",
+ [NAND_ECC_HW_SYNDROME] = "hw_syndrome",
+ [NAND_ECC_ON_DIE] = "on-die",
+ };
+ enum nand_ecc_legacy_mode eng_type;
const char *pm;
int err;
@@ -4874,12 +4883,13 @@ of_get_nand_ecc_engine_type(struct device_node *np)
return NAND_ECC_ENGINE_TYPE_INVALID;
for (eng_type = NAND_ECC_NONE;
- eng_type < ARRAY_SIZE(nand_ecc_modes); eng_type++) {
- if (!strcasecmp(pm, nand_ecc_modes[eng_type])) {
+ eng_type < ARRAY_SIZE(nand_ecc_legacy_modes); eng_type++) {
+ if (!strcasecmp(pm, nand_ecc_legacy_modes[eng_type])) {
switch (eng_type) {
case NAND_ECC_NONE:
return NAND_ECC_ENGINE_TYPE_NONE;
case NAND_ECC_SOFT:
+ case NAND_ECC_SOFT_BCH:
return NAND_ECC_ENGINE_TYPE_SOFT;
case NAND_ECC_HW:
case NAND_ECC_HW_SYNDROME:
@@ -4892,43 +4902,29 @@ of_get_nand_ecc_engine_type(struct device_node *np)
}
}
- /*
- * For backward compatibility we support few obsoleted values that don't
- * have their mappings into the nand_ecc_engine_providers enum anymore
- * (they were merged with other enums).
- */
- if (!strcasecmp(pm, "soft_bch"))
- return NAND_ECC_ENGINE_TYPE_SOFT;
-
return NAND_ECC_ENGINE_TYPE_INVALID;
}
-static const char * const nand_ecc_algos[] = {
- [NAND_ECC_ALGO_HAMMING] = "hamming",
- [NAND_ECC_ALGO_BCH] = "bch",
- [NAND_ECC_ALGO_RS] = "rs",
-};
-
-static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
+enum nand_ecc_placement
+of_get_rawnand_ecc_placement_legacy(struct device_node *np)
{
- enum nand_ecc_algo ecc_algo;
const char *pm;
int err;
- err = of_property_read_string(np, "nand-ecc-algo", &pm);
+ err = of_property_read_string(np, "nand-ecc-mode", &pm);
if (!err) {
- for (ecc_algo = NAND_ECC_ALGO_HAMMING;
- ecc_algo < ARRAY_SIZE(nand_ecc_algos);
- ecc_algo++) {
- if (!strcasecmp(pm, nand_ecc_algos[ecc_algo]))
- return ecc_algo;
- }
+ if (!strcasecmp(pm, "hw_syndrome"))
+ return NAND_ECC_PLACEMENT_INTERLEAVED;
}
- /*
- * For backward compatibility we also read "nand-ecc-mode" checking
- * for some obsoleted values that were specifying ECC algorithm.
- */
+ return NAND_ECC_PLACEMENT_UNKNOWN;
+}
+
+static enum nand_ecc_algo of_get_rawnand_ecc_algo_legacy(struct device_node *np)
+{
+ const char *pm;
+ int err;
+
err = of_property_read_string(np, "nand-ecc-mode", &pm);
if (!err) {
if (!strcasecmp(pm, "soft"))
@@ -4940,22 +4936,19 @@ static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
return NAND_ECC_ALGO_UNKNOWN;
}
-static int of_get_nand_ecc_step_size(struct device_node *np)
+static void of_get_nand_ecc_legacy_user_config(struct nand_chip *chip)
{
- int ret;
- u32 val;
+ struct device_node *dn = nand_get_flash_node(chip);
+ struct nand_ecc_props *user_conf = &chip->base.ecc.user_conf;
- ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
- return ret ? ret : val;
-}
+ if (user_conf->engine_type != NAND_ECC_ENGINE_TYPE_INVALID)
+ user_conf->engine_type = of_get_rawnand_ecc_engine_type_legacy(dn);
-static int of_get_nand_ecc_strength(struct device_node *np)
-{
- int ret;
- u32 val;
+ if (user_conf->algo != NAND_ECC_ALGO_UNKNOWN)
+ user_conf->algo = of_get_rawnand_ecc_algo_legacy(dn);
- ret = of_property_read_u32(np, "nand-ecc-strength", &val);
- return ret ? ret : val;
+ if (user_conf->placement != NAND_ECC_PLACEMENT_UNKNOWN)
+ user_conf->placement = of_get_rawnand_ecc_placement_legacy(dn);
}
static int of_get_nand_bus_width(struct device_node *np)
@@ -4979,12 +4972,10 @@ static bool of_get_nand_on_flash_bbt(struct device_node *np)
return of_property_read_bool(np, "nand-on-flash-bbt");
}
-static int nand_dt_init(struct nand_chip *chip)
+static int rawnand_dt_init(struct nand_chip *chip)
{
+ struct nand_device *nand = mtd_to_nanddev(nand_to_mtd(chip));
struct device_node *dn = nand_get_flash_node(chip);
- enum nand_ecc_engine_type ecc_type;
- enum nand_ecc_algo ecc_algo;
- int ecc_strength, ecc_step;
if (!dn)
return 0;
@@ -4998,26 +4989,33 @@ static int nand_dt_init(struct nand_chip *chip)
if (of_get_nand_on_flash_bbt(dn))
chip->bbt_options |= NAND_BBT_USE_FLASH;
- ecc_type = of_get_nand_ecc_engine_type(dn);
- ecc_algo = of_get_nand_ecc_algo(dn);
- ecc_strength = of_get_nand_ecc_strength(dn);
- ecc_step = of_get_nand_ecc_step_size(dn);
-
- if (ecc_type != NAND_ECC_ENGINE_TYPE_INVALID)
- chip->ecc.engine_type = ecc_type;
-
- if (ecc_algo != NAND_ECC_ALGO_UNKNOWN)
- chip->ecc.algo = ecc_algo;
-
- if (ecc_strength >= 0)
- chip->ecc.strength = ecc_strength;
-
- if (ecc_step > 0)
- chip->ecc.size = ecc_step;
-
if (of_property_read_bool(dn, "nand-ecc-maximize"))
chip->ecc.options |= NAND_ECC_MAXIMIZE;
+ of_get_nand_ecc_user_config(nand);
+ of_get_nand_ecc_legacy_user_config(chip);
+
+ /*
+ * If neither the user nor the NAND controller have requested a specific
+ * ECC engine type, we will default to NAND_ECC_ENGINE_TYPE_ON_HOST.
+ */
+ nand->ecc.defaults.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+
+ /*
+ * Use the user requested engine type, unless there is none, in this
+ * case default to the NAND controller choice, otherwise fallback to
+ * the raw NAND default one.
+ */
+ if (nand->ecc.user_conf.engine_type != NAND_ECC_ENGINE_TYPE_INVALID)
+ chip->ecc.engine_type = nand->ecc.user_conf.engine_type;
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_INVALID)
+ chip->ecc.engine_type = nand->ecc.defaults.engine_type;
+
+ chip->ecc.placement = nand->ecc.user_conf.placement;
+ chip->ecc.algo = nand->ecc.user_conf.algo;
+ chip->ecc.strength = nand->ecc.user_conf.strength;
+ chip->ecc.size = nand->ecc.user_conf.step_size;
+
return 0;
}
@@ -5054,7 +5052,7 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
/* Enforce the right timings for reset/detection */
onfi_fill_data_interface(chip, NAND_SDR_IFACE, 0);
- ret = nand_dt_init(chip);
+ ret = rawnand_dt_init(chip);
if (ret)
return ret;
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index af02eb07207e..66f69a1d27a5 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -81,18 +81,6 @@ struct nand_chip;
#define NAND_DATA_IFACE_CHECK_ONLY -1
-/*
- * Constants for ECC_MODES
- */
-enum nand_ecc_mode {
- NAND_ECC_INVALID,
- NAND_ECC_NONE,
- NAND_ECC_SOFT,
- NAND_ECC_HW,
- NAND_ECC_HW_SYNDROME,
- NAND_ECC_ON_DIE,
-};
-
/*
* Constants for Hardware ECC
*/
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread
* [PATCH v10 20/20] mtd: rawnand: Use the NAND framework user_conf object for ECC flags
2020-06-03 17:57 ` Miquel Raynal
(?)
@ 2020-06-03 17:57 ` Miquel Raynal
-1 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Boris Brezillon, Thomas Petazzoni, linux-arm-kernel, Mason Yang,
Julien Su, Rob Herring, Mark Rutland, devicetree, Miquel Raynal
Instead of storing the ECC flags in chip->ecc.options, use
nanddev->ecc.user_conf.flags.
There is currently only one to save: NAND_ECC_MAXIMIZE.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/atmel/nand-controller.c | 3 ++-
drivers/mtd/nand/raw/denali_pci.c | 2 +-
drivers/mtd/nand/raw/nand_base.c | 14 +++++++-------
drivers/mtd/nand/raw/sunxi_nand.c | 3 ++-
drivers/mtd/nand/raw/tegra_nand.c | 5 +++--
include/linux/mtd/rawnand.h | 1 -
6 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 08df7f23b859..a594f5efb0a2 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1046,6 +1046,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
const struct nand_ecc_props *requirements =
nanddev_get_ecc_requirements(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
struct atmel_nand *nand = to_atmel_nand(chip);
struct atmel_nand_controller *nc;
struct atmel_pmecc_user_req req;
@@ -1070,7 +1071,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
chip->ecc.size = val;
}
- if (chip->ecc.options & NAND_ECC_MAXIMIZE)
+ if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH)
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
else if (chip->ecc.strength)
req.ecc.strength = chip->ecc.strength;
diff --git a/drivers/mtd/nand/raw/denali_pci.c b/drivers/mtd/nand/raw/denali_pci.c
index 2f77ee55e1bf..20c085a30adc 100644
--- a/drivers/mtd/nand/raw/denali_pci.c
+++ b/drivers/mtd/nand/raw/denali_pci.c
@@ -100,7 +100,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto out_remove_denali;
}
- dchip->chip.ecc.options |= NAND_ECC_MAXIMIZE;
+ dchip->chip.base.ecc.user_conf.flags |= NAND_ECC_MAXIMIZE_STRENGTH;
dchip->nsels = nsels;
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 53e07f25ae65..c0d13f3b308a 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4989,9 +4989,6 @@ static int rawnand_dt_init(struct nand_chip *chip)
if (of_get_nand_on_flash_bbt(dn))
chip->bbt_options |= NAND_BBT_USE_FLASH;
- if (of_property_read_bool(dn, "nand-ecc-maximize"))
- chip->ecc.options |= NAND_ECC_MAXIMIZE;
-
of_get_nand_ecc_user_config(nand);
of_get_nand_ecc_legacy_user_config(chip);
@@ -5122,6 +5119,7 @@ static void nand_scan_ident_cleanup(struct nand_chip *chip)
static int nand_set_ecc_soft_ops(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (WARN_ON(ecc->engine_type != NAND_ECC_ENGINE_TYPE_SOFT))
@@ -5197,7 +5195,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
* used.
*/
if (mtd->ooblayout == nand_get_large_page_ooblayout() &&
- ecc->options & NAND_ECC_MAXIMIZE) {
+ nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH) {
int steps, bytes;
/* Always prefer 1k blocks over 512bytes ones */
@@ -5437,11 +5435,12 @@ nand_maximize_ecc(struct nand_chip *chip,
* @caps: ECC engine caps info structure
* @oobavail: OOB size that the ECC engine can use
*
- * Choose the ECC configuration according to following logic
+ * Choose the ECC configuration according to following logic.
*
* 1. If both ECC step size and ECC strength are already set (usually by DT)
* then check if it is supported by this controller.
- * 2. If NAND_ECC_MAXIMIZE is set, then select maximum ECC strength.
+ * 2. If the user provided the nand-ecc-maximize property, then select maximum
+ * ECC strength.
* 3. Otherwise, try to match the ECC step size and ECC strength closest
* to the chip's requirement. If available OOB size can't fit the chip
* requirement then fallback to the maximum ECC step size and ECC strength.
@@ -5452,6 +5451,7 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
const struct nand_ecc_caps *caps, int oobavail)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
if (WARN_ON(oobavail < 0 || oobavail > mtd->oobsize))
return -EINVAL;
@@ -5459,7 +5459,7 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
if (chip->ecc.size && chip->ecc.strength)
return nand_check_ecc_caps(chip, caps, oobavail);
- if (chip->ecc.options & NAND_ECC_MAXIMIZE)
+ if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH)
return nand_maximize_ecc(chip, caps, oobavail);
if (!nand_match_ecc_req(chip, caps, oobavail))
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 490ba485e939..cbd05cea5bad 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1609,12 +1609,13 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
struct mtd_info *mtd = nand_to_mtd(nand);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
struct sunxi_nand_hw_ecc *data;
int nsectors;
int ret;
int i;
- if (ecc->options & NAND_ECC_MAXIMIZE) {
+ if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH) {
int bytes;
ecc->size = 1024;
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index fecdb7e8f9e8..5c94ecbf496f 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -840,9 +840,10 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
int strength_len, int bits_per_step,
int oobsize)
{
+ struct nand_device *base = mtd_to_nanddev(nand_to_mtd(chip));
const struct nand_ecc_props *requirements =
- nanddev_get_ecc_requirements(&chip->base);
- bool maximize = chip->ecc.options & NAND_ECC_MAXIMIZE;
+ nanddev_get_ecc_requirements(base);
+ bool maximize = base->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH;
int i;
/*
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 66f69a1d27a5..9d69fa6608ae 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -98,7 +98,6 @@ struct nand_chip;
* pages and you want to rely on the default implementation.
*/
#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0)
-#define NAND_ECC_MAXIMIZE BIT(1)
/*
* Option constants for bizarre disfunctionality and real
--
2.20.1
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 20/20] mtd: rawnand: Use the NAND framework user_conf object for ECC flags
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Instead of storing the ECC flags in chip->ecc.options, use
nanddev->ecc.user_conf.flags.
There is currently only one to save: NAND_ECC_MAXIMIZE.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/atmel/nand-controller.c | 3 ++-
drivers/mtd/nand/raw/denali_pci.c | 2 +-
drivers/mtd/nand/raw/nand_base.c | 14 +++++++-------
drivers/mtd/nand/raw/sunxi_nand.c | 3 ++-
drivers/mtd/nand/raw/tegra_nand.c | 5 +++--
include/linux/mtd/rawnand.h | 1 -
6 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 08df7f23b859..a594f5efb0a2 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1046,6 +1046,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
const struct nand_ecc_props *requirements =
nanddev_get_ecc_requirements(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
struct atmel_nand *nand = to_atmel_nand(chip);
struct atmel_nand_controller *nc;
struct atmel_pmecc_user_req req;
@@ -1070,7 +1071,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
chip->ecc.size = val;
}
- if (chip->ecc.options & NAND_ECC_MAXIMIZE)
+ if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH)
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
else if (chip->ecc.strength)
req.ecc.strength = chip->ecc.strength;
diff --git a/drivers/mtd/nand/raw/denali_pci.c b/drivers/mtd/nand/raw/denali_pci.c
index 2f77ee55e1bf..20c085a30adc 100644
--- a/drivers/mtd/nand/raw/denali_pci.c
+++ b/drivers/mtd/nand/raw/denali_pci.c
@@ -100,7 +100,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto out_remove_denali;
}
- dchip->chip.ecc.options |= NAND_ECC_MAXIMIZE;
+ dchip->chip.base.ecc.user_conf.flags |= NAND_ECC_MAXIMIZE_STRENGTH;
dchip->nsels = nsels;
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 53e07f25ae65..c0d13f3b308a 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4989,9 +4989,6 @@ static int rawnand_dt_init(struct nand_chip *chip)
if (of_get_nand_on_flash_bbt(dn))
chip->bbt_options |= NAND_BBT_USE_FLASH;
- if (of_property_read_bool(dn, "nand-ecc-maximize"))
- chip->ecc.options |= NAND_ECC_MAXIMIZE;
-
of_get_nand_ecc_user_config(nand);
of_get_nand_ecc_legacy_user_config(chip);
@@ -5122,6 +5119,7 @@ static void nand_scan_ident_cleanup(struct nand_chip *chip)
static int nand_set_ecc_soft_ops(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (WARN_ON(ecc->engine_type != NAND_ECC_ENGINE_TYPE_SOFT))
@@ -5197,7 +5195,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
* used.
*/
if (mtd->ooblayout == nand_get_large_page_ooblayout() &&
- ecc->options & NAND_ECC_MAXIMIZE) {
+ nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH) {
int steps, bytes;
/* Always prefer 1k blocks over 512bytes ones */
@@ -5437,11 +5435,12 @@ nand_maximize_ecc(struct nand_chip *chip,
* @caps: ECC engine caps info structure
* @oobavail: OOB size that the ECC engine can use
*
- * Choose the ECC configuration according to following logic
+ * Choose the ECC configuration according to following logic.
*
* 1. If both ECC step size and ECC strength are already set (usually by DT)
* then check if it is supported by this controller.
- * 2. If NAND_ECC_MAXIMIZE is set, then select maximum ECC strength.
+ * 2. If the user provided the nand-ecc-maximize property, then select maximum
+ * ECC strength.
* 3. Otherwise, try to match the ECC step size and ECC strength closest
* to the chip's requirement. If available OOB size can't fit the chip
* requirement then fallback to the maximum ECC step size and ECC strength.
@@ -5452,6 +5451,7 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
const struct nand_ecc_caps *caps, int oobavail)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
if (WARN_ON(oobavail < 0 || oobavail > mtd->oobsize))
return -EINVAL;
@@ -5459,7 +5459,7 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
if (chip->ecc.size && chip->ecc.strength)
return nand_check_ecc_caps(chip, caps, oobavail);
- if (chip->ecc.options & NAND_ECC_MAXIMIZE)
+ if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH)
return nand_maximize_ecc(chip, caps, oobavail);
if (!nand_match_ecc_req(chip, caps, oobavail))
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 490ba485e939..cbd05cea5bad 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1609,12 +1609,13 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
struct mtd_info *mtd = nand_to_mtd(nand);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
struct sunxi_nand_hw_ecc *data;
int nsectors;
int ret;
int i;
- if (ecc->options & NAND_ECC_MAXIMIZE) {
+ if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH) {
int bytes;
ecc->size = 1024;
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index fecdb7e8f9e8..5c94ecbf496f 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -840,9 +840,10 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
int strength_len, int bits_per_step,
int oobsize)
{
+ struct nand_device *base = mtd_to_nanddev(nand_to_mtd(chip));
const struct nand_ecc_props *requirements =
- nanddev_get_ecc_requirements(&chip->base);
- bool maximize = chip->ecc.options & NAND_ECC_MAXIMIZE;
+ nanddev_get_ecc_requirements(base);
+ bool maximize = base->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH;
int i;
/*
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 66f69a1d27a5..9d69fa6608ae 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -98,7 +98,6 @@ struct nand_chip;
* pages and you want to rely on the default implementation.
*/
#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0)
-#define NAND_ECC_MAXIMIZE BIT(1)
/*
* Option constants for bizarre disfunctionality and real
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 72+ messages in thread* [PATCH v10 20/20] mtd: rawnand: Use the NAND framework user_conf object for ECC flags
@ 2020-06-03 17:57 ` Miquel Raynal
0 siblings, 0 replies; 72+ messages in thread
From: Miquel Raynal @ 2020-06-03 17:57 UTC (permalink / raw)
To: Richard Weinberger, Vignesh Raghavendra, Tudor Ambarus, linux-mtd
Cc: Mark Rutland, devicetree, Julien Su, Miquel Raynal, Rob Herring,
Thomas Petazzoni, Boris Brezillon, Mason Yang, linux-arm-kernel
Instead of storing the ECC flags in chip->ecc.options, use
nanddev->ecc.user_conf.flags.
There is currently only one to save: NAND_ECC_MAXIMIZE.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/mtd/nand/raw/atmel/nand-controller.c | 3 ++-
drivers/mtd/nand/raw/denali_pci.c | 2 +-
drivers/mtd/nand/raw/nand_base.c | 14 +++++++-------
drivers/mtd/nand/raw/sunxi_nand.c | 3 ++-
drivers/mtd/nand/raw/tegra_nand.c | 5 +++--
include/linux/mtd/rawnand.h | 1 -
6 files changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index 08df7f23b859..a594f5efb0a2 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -1046,6 +1046,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
const struct nand_ecc_props *requirements =
nanddev_get_ecc_requirements(&chip->base);
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
struct atmel_nand *nand = to_atmel_nand(chip);
struct atmel_nand_controller *nc;
struct atmel_pmecc_user_req req;
@@ -1070,7 +1071,7 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
chip->ecc.size = val;
}
- if (chip->ecc.options & NAND_ECC_MAXIMIZE)
+ if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH)
req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
else if (chip->ecc.strength)
req.ecc.strength = chip->ecc.strength;
diff --git a/drivers/mtd/nand/raw/denali_pci.c b/drivers/mtd/nand/raw/denali_pci.c
index 2f77ee55e1bf..20c085a30adc 100644
--- a/drivers/mtd/nand/raw/denali_pci.c
+++ b/drivers/mtd/nand/raw/denali_pci.c
@@ -100,7 +100,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
goto out_remove_denali;
}
- dchip->chip.ecc.options |= NAND_ECC_MAXIMIZE;
+ dchip->chip.base.ecc.user_conf.flags |= NAND_ECC_MAXIMIZE_STRENGTH;
dchip->nsels = nsels;
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 53e07f25ae65..c0d13f3b308a 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -4989,9 +4989,6 @@ static int rawnand_dt_init(struct nand_chip *chip)
if (of_get_nand_on_flash_bbt(dn))
chip->bbt_options |= NAND_BBT_USE_FLASH;
- if (of_property_read_bool(dn, "nand-ecc-maximize"))
- chip->ecc.options |= NAND_ECC_MAXIMIZE;
-
of_get_nand_ecc_user_config(nand);
of_get_nand_ecc_legacy_user_config(chip);
@@ -5122,6 +5119,7 @@ static void nand_scan_ident_cleanup(struct nand_chip *chip)
static int nand_set_ecc_soft_ops(struct nand_chip *chip)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
struct nand_ecc_ctrl *ecc = &chip->ecc;
if (WARN_ON(ecc->engine_type != NAND_ECC_ENGINE_TYPE_SOFT))
@@ -5197,7 +5195,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
* used.
*/
if (mtd->ooblayout == nand_get_large_page_ooblayout() &&
- ecc->options & NAND_ECC_MAXIMIZE) {
+ nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH) {
int steps, bytes;
/* Always prefer 1k blocks over 512bytes ones */
@@ -5437,11 +5435,12 @@ nand_maximize_ecc(struct nand_chip *chip,
* @caps: ECC engine caps info structure
* @oobavail: OOB size that the ECC engine can use
*
- * Choose the ECC configuration according to following logic
+ * Choose the ECC configuration according to following logic.
*
* 1. If both ECC step size and ECC strength are already set (usually by DT)
* then check if it is supported by this controller.
- * 2. If NAND_ECC_MAXIMIZE is set, then select maximum ECC strength.
+ * 2. If the user provided the nand-ecc-maximize property, then select maximum
+ * ECC strength.
* 3. Otherwise, try to match the ECC step size and ECC strength closest
* to the chip's requirement. If available OOB size can't fit the chip
* requirement then fallback to the maximum ECC step size and ECC strength.
@@ -5452,6 +5451,7 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
const struct nand_ecc_caps *caps, int oobavail)
{
struct mtd_info *mtd = nand_to_mtd(chip);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
if (WARN_ON(oobavail < 0 || oobavail > mtd->oobsize))
return -EINVAL;
@@ -5459,7 +5459,7 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
if (chip->ecc.size && chip->ecc.strength)
return nand_check_ecc_caps(chip, caps, oobavail);
- if (chip->ecc.options & NAND_ECC_MAXIMIZE)
+ if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH)
return nand_maximize_ecc(chip, caps, oobavail);
if (!nand_match_ecc_req(chip, caps, oobavail))
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 490ba485e939..cbd05cea5bad 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1609,12 +1609,13 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
struct mtd_info *mtd = nand_to_mtd(nand);
+ struct nand_device *nanddev = mtd_to_nanddev(mtd);
struct sunxi_nand_hw_ecc *data;
int nsectors;
int ret;
int i;
- if (ecc->options & NAND_ECC_MAXIMIZE) {
+ if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH) {
int bytes;
ecc->size = 1024;
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index fecdb7e8f9e8..5c94ecbf496f 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -840,9 +840,10 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
int strength_len, int bits_per_step,
int oobsize)
{
+ struct nand_device *base = mtd_to_nanddev(nand_to_mtd(chip));
const struct nand_ecc_props *requirements =
- nanddev_get_ecc_requirements(&chip->base);
- bool maximize = chip->ecc.options & NAND_ECC_MAXIMIZE;
+ nanddev_get_ecc_requirements(base);
+ bool maximize = base->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH;
int i;
/*
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index 66f69a1d27a5..9d69fa6608ae 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -98,7 +98,6 @@ struct nand_chip;
* pages and you want to rely on the default implementation.
*/
#define NAND_ECC_GENERIC_ERASED_CHECK BIT(0)
-#define NAND_ECC_MAXIMIZE BIT(1)
/*
* Option constants for bizarre disfunctionality and real
--
2.20.1
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
^ permalink raw reply related [flat|nested] 72+ messages in thread