[PATCH 4.19 00/28] 4.19.127-rc1 review

[PATCH 4.19 00/28] 4.19.127-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.19.127 release.
There are 28 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 07 Jun 2020 13:54:56 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.127-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.19.127-rc1

Dinghao Liu <dinghao.liu@zju.edu.cn>
    net: smsc911x: Fix runtime PM imbalance on error

Jonathan McDowell <noodles@earth.li>
    net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x

Valentin Longchamp <valentin@longchamp.me>
    net/ethernet/freescale: rework quiesce/activate for ucc_geth

Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
    null_blk: return error for invalid zone size

Gerald Schaefer <gerald.schaefer@de.ibm.com>
    s390/mm: fix set_huge_pte_at() for empty ptes

Jan Schmidt <jan@centricular.com>
    drm/edid: Add Oculus Rift S to non-desktop list

Jeremy Kerr <jk@ozlabs.org>
    net: bmac: Fix read of MAC address from ROM

Nathan Chancellor <natechancellor@gmail.com>
    x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables

Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
    i2c: altera: Fix race between xfer_msg and isr thread

Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
    evm: Fix RCU list related warnings

Vineet Gupta <vgupta@synopsys.com>
    ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT

Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
    ARC: Fix ICCM & DCCM runtime size checks

Vasily Gorbik <gor@linux.ibm.com>
    s390/ftrace: save traced function caller

Xinwei Kong <kong.kongxinwei@hisilicon.com>
    spi: dw: use "smp_mb()" to avoid sending spi data error

Anju T Sudhakar <anju@linux.vnet.ibm.com>
    powerpc/powernv: Avoid re-registration of imc debugfs directory

Xiang Chen <chenxiang66@hisilicon.com>
    scsi: hisi_sas: Check sas_port before using it

Lucas De Marchi <lucas.demarchi@intel.com>
    drm/i915: fix port checks for MST support on gen >= 11

Dan Carpenter <dan.carpenter@oracle.com>
    airo: Fix read overflows sending packets

DENG Qingfang <dqfext@gmail.com>
    net: dsa: mt7530: set CPU port to fallback mode

Can Guo <cang@codeaurora.org>
    scsi: ufs: Release clock if DMA map fails

Jérôme Pouiller <jerome.pouiller@silabs.com>
    mmc: fix compilation of user API

Daniel Axtens <dja@axtens.net>
    kernel/relay.c: handle alloc_percpu returning NULL in relay_open

Giuseppe Marco Randazzo <gmrandazzo@gmail.com>
    p54usb: add AirVasT USB stick device-id

Julian Sax <jsbc@gmx.de>
    HID: i2c-hid: add Schneider SCL142ALM to descriptor override

Scott Shumate <scott.shumate@gmail.com>
    HID: sony: Fix for broken buttons on DS3 USB dongles

Fan Yang <Fan_Yang@sjtu.edu.cn>
    mm: Fix mremap not considering huge pmd devmap

Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
    libnvdimm: Fix endian conversion issues 

Tejun Heo <tj@kernel.org>
    Revert "cgroup: Add memory barriers to plug cgroup_rstat_updated() race window"


-------------

Diffstat:

 Makefile                                           |  4 +--
 arch/arc/kernel/setup.c                            |  5 +--
 arch/arc/plat-eznps/Kconfig                        |  1 +
 arch/powerpc/platforms/powernv/opal-imc.c          | 39 +++++++++-------------
 arch/s390/kernel/mcount.S                          |  1 +
 arch/s390/mm/hugetlbpage.c                         |  9 +++--
 arch/x86/include/asm/pgtable.h                     |  1 +
 arch/x86/mm/mmio-mod.c                             |  4 +--
 drivers/block/null_blk_zoned.c                     |  4 +++
 drivers/gpu/drm/drm_edid.c                         |  3 +-
 drivers/gpu/drm/i915/intel_dp.c                    |  7 ++--
 drivers/gpu/drm/i915/intel_dp_mst.c                | 22 ++++++++----
 drivers/hid/hid-sony.c                             | 17 ++++++++++
 drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c           |  8 +++++
 drivers/i2c/busses/i2c-altera.c                    | 10 +++++-
 drivers/net/dsa/mt7530.c                           | 11 ++++--
 drivers/net/dsa/mt7530.h                           |  6 ++++
 drivers/net/ethernet/apple/bmac.c                  |  2 +-
 drivers/net/ethernet/freescale/ucc_geth.c          | 13 ++++----
 drivers/net/ethernet/smsc/smsc911x.c               |  9 ++---
 .../net/ethernet/stmicro/stmmac/dwmac-ipq806x.c    | 13 ++++++++
 drivers/net/wireless/cisco/airo.c                  | 12 +++++++
 drivers/net/wireless/intersil/p54/p54usb.c         |  1 +
 drivers/nvdimm/btt.c                               |  8 ++---
 drivers/nvdimm/namespace_devs.c                    |  7 ++--
 drivers/scsi/hisi_sas/hisi_sas_main.c              |  3 +-
 drivers/scsi/ufs/ufshcd.c                          |  1 +
 drivers/spi/spi-dw.c                               |  3 ++
 include/uapi/linux/mmc/ioctl.h                     |  1 +
 kernel/cgroup/rstat.c                              | 16 ++-------
 kernel/relay.c                                     |  5 +++
 mm/mremap.c                                        |  2 +-
 security/integrity/evm/evm_crypto.c                |  2 +-
 security/integrity/evm/evm_main.c                  |  4 +--
 security/integrity/evm/evm_secfs.c                 |  9 ++++-
 35 files changed, 178 insertions(+), 85 deletions(-)

[PATCH 4.19 01/28] Revert "cgroup: Add memory barriers to plug cgroup_rstat_updated() race window"

[Greg Kroah-Hartman]

From: Tejun Heo <tj@kernel.org>

[ Upstream commit d8ef4b38cb69d907f9b0e889c44d05fc0f890977 ]

This reverts commit 9a9e97b2f1f2 ("cgroup: Add memory barriers to plug
cgroup_rstat_updated() race window").

The commit was added in anticipation of memcg rstat conversion which needed
synchronous accounting for the event counters (e.g. oom kill count). However,
the conversion didn't get merged due to percpu memory overhead concern which
couldn't be addressed at the time.

Unfortunately, the patch's addition of smp_mb() to cgroup_rstat_updated()
meant that every scheduling event now had to go through an additional full
barrier and Mel Gorman noticed it as 1% regression in netperf UDP_STREAM test.

There's no need to have this barrier in tree now and even if we need
synchronous accounting in the future, the right thing to do is separating that
out to a separate function so that hot paths which don't care about
synchronous behavior don't have to pay the overhead of the full barrier. Let's
revert.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Link: http://lkml.kernel.org/r/20200409154413.GK3818@techsingularity.net
Cc: v4.18+
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/cgroup/rstat.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c
index bb95a35e8c2d..d0ed410b4127 100644
--- a/kernel/cgroup/rstat.c
+++ b/kernel/cgroup/rstat.c
@@ -32,12 +32,9 @@ void cgroup_rstat_updated(struct cgroup *cgrp, int cpu)
 		return;
 
 	/*
-	 * Paired with the one in cgroup_rstat_cpu_pop_upated().  Either we
-	 * see NULL updated_next or they see our updated stat.
-	 */
-	smp_mb();
-
-	/*
+	 * Speculative already-on-list test. This may race leading to
+	 * temporary inaccuracies, which is fine.
+	 *
 	 * Because @parent's updated_children is terminated with @parent
 	 * instead of NULL, we can tell whether @cgrp is on the list by
 	 * testing the next pointer for NULL.
@@ -133,13 +130,6 @@ static struct cgroup *cgroup_rstat_cpu_pop_updated(struct cgroup *pos,
 		*nextp = rstatc->updated_next;
 		rstatc->updated_next = NULL;
 
-		/*
-		 * Paired with the one in cgroup_rstat_cpu_updated().
-		 * Either they see NULL updated_next or we see their
-		 * updated stat.
-		 */
-		smp_mb();
-
 		return pos;
 	}
 
-- 
2.25.1

[PATCH 4.19 02/28] libnvdimm: Fix endian conversion issues

[Greg Kroah-Hartman]

From: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

commit 86aa66687442ef45909ff9814b82b4d2bb892294 upstream.

nd_label->dpa issue was observed when trying to enable the namespace created
with little-endian kernel on a big-endian kernel. That made me run
`sparse` on the rest of the code and other changes are the result of that.

Fixes: d9b83c756953 ("libnvdimm, btt: rework error clearing")
Fixes: 9dedc73a4658 ("libnvdimm/btt: Fix LBA masking during 'free list' population")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/20190809074726.27815-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvdimm/btt.c            |    8 ++++----
 drivers/nvdimm/namespace_devs.c |    7 ++++---
 2 files changed, 8 insertions(+), 7 deletions(-)

--- a/drivers/nvdimm/btt.c
+++ b/drivers/nvdimm/btt.c
@@ -400,9 +400,9 @@ static int btt_flog_write(struct arena_i
 	arena->freelist[lane].sub = 1 - arena->freelist[lane].sub;
 	if (++(arena->freelist[lane].seq) == 4)
 		arena->freelist[lane].seq = 1;
-	if (ent_e_flag(ent->old_map))
+	if (ent_e_flag(le32_to_cpu(ent->old_map)))
 		arena->freelist[lane].has_err = 1;
-	arena->freelist[lane].block = le32_to_cpu(ent_lba(ent->old_map));
+	arena->freelist[lane].block = ent_lba(le32_to_cpu(ent->old_map));
 
 	return ret;
 }
@@ -568,8 +568,8 @@ static int btt_freelist_init(struct aren
 		 * FIXME: if error clearing fails during init, we want to make
 		 * the BTT read-only
 		 */
-		if (ent_e_flag(log_new.old_map) &&
-				!ent_normal(log_new.old_map)) {
+		if (ent_e_flag(le32_to_cpu(log_new.old_map)) &&
+		    !ent_normal(le32_to_cpu(log_new.old_map))) {
 			arena->freelist[i].has_err = 1;
 			ret = arena_clear_freelist_error(arena, i);
 			if (ret)
--- a/drivers/nvdimm/namespace_devs.c
+++ b/drivers/nvdimm/namespace_devs.c
@@ -1996,7 +1996,7 @@ static struct device *create_namespace_p
 		nd_mapping = &nd_region->mapping[i];
 		label_ent = list_first_entry_or_null(&nd_mapping->labels,
 				typeof(*label_ent), list);
-		label0 = label_ent ? label_ent->label : 0;
+		label0 = label_ent ? label_ent->label : NULL;
 
 		if (!label0) {
 			WARN_ON(1);
@@ -2332,8 +2332,9 @@ static struct device **scan_labels(struc
 			continue;
 
 		/* skip labels that describe extents outside of the region */
-		if (nd_label->dpa < nd_mapping->start || nd_label->dpa > map_end)
-			continue;
+		if (__le64_to_cpu(nd_label->dpa) < nd_mapping->start ||
+		    __le64_to_cpu(nd_label->dpa) > map_end)
+				continue;
 
 		i = add_namespace_resource(nd_region, nd_label, devs, count);
 		if (i < 0)

[PATCH 4.19 03/28] mm: Fix mremap not considering huge pmd devmap

[Greg Kroah-Hartman]

From: Fan Yang <Fan_Yang@sjtu.edu.cn>

commit 5bfea2d9b17f1034a68147a8b03b9789af5700f9 upstream.

The original code in mm/mremap.c checks huge pmd by:

		if (is_swap_pmd(*old_pmd) || pmd_trans_huge(*old_pmd)) {

However, a DAX mapped nvdimm is mapped as huge page (by default) but it
is not transparent huge page (_PAGE_PSE | PAGE_DEVMAP).  This commit
changes the condition to include the case.

This addresses CVE-2020-10757.

Fixes: 5c7fb56e5e3f ("mm, dax: dax-pmd vs thp-pmd vs hugetlbfs-pmd")
Cc: <stable@vger.kernel.org>
Reported-by: Fan Yang <Fan_Yang@sjtu.edu.cn>
Signed-off-by: Fan Yang <Fan_Yang@sjtu.edu.cn>
Tested-by: Fan Yang <Fan_Yang@sjtu.edu.cn>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/pgtable.h |    1 +
 mm/mremap.c                    |    2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -237,6 +237,7 @@ static inline int pmd_large(pmd_t pte)
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+/* NOTE: when predicate huge page, consider also pmd_devmap, or use pmd_large */
 static inline int pmd_trans_huge(pmd_t pmd)
 {
 	return (pmd_val(pmd) & (_PAGE_PSE|_PAGE_DEVMAP)) == _PAGE_PSE;
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -221,7 +221,7 @@ unsigned long move_page_tables(struct vm
 		new_pmd = alloc_new_pmd(vma->vm_mm, vma, new_addr);
 		if (!new_pmd)
 			break;
-		if (is_swap_pmd(*old_pmd) || pmd_trans_huge(*old_pmd)) {
+		if (is_swap_pmd(*old_pmd) || pmd_trans_huge(*old_pmd) || pmd_devmap(*old_pmd)) {
 			if (extent == HPAGE_PMD_SIZE) {
 				bool moved;
 				/* See comment in move_ptes() */

[PATCH 4.19 04/28] HID: sony: Fix for broken buttons on DS3 USB dongles

[Greg Kroah-Hartman]

From: Scott Shumate <scott.shumate@gmail.com>

commit e72455b898ac678667c5674668186b4670d87d11 upstream.

Fix for non-working buttons on knock-off USB dongles for Sony
controllers. These USB dongles are used to connect older Sony DA/DS1/DS2
controllers via USB and are common on Amazon, AliExpress, etc.  Without
the patch, the square, X, and circle buttons do not function.  These
dongles used to work prior to kernel 4.10 but removing the global DS3
report fixup in commit e19a267b9987 ("HID: sony: DS3 comply to Linux gamepad
spec") exposed the problem.

Many people reported the problem on the Ubuntu forums and are working
around the problem by falling back to the 4.9 hid-sony driver.

The problem stems from these dongles incorrectly reporting their button
count as 13 instead of 16.  This patch fixes up the report descriptor by
changing the button report count to 16 and removing 3 padding bits.

Cc: stable@vger.kernel.org
Fixes: e19a267b9987 ("HID: sony: DS3 comply to Linux gamepad spec")
Signed-off-by: Scott Shumate <scott.shumate@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/hid-sony.c |   17 +++++++++++++++++
 1 file changed, 17 insertions(+)

--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -869,6 +869,23 @@ static u8 *sony_report_fixup(struct hid_
 	if (sc->quirks & PS3REMOTE)
 		return ps3remote_fixup(hdev, rdesc, rsize);
 
+	/*
+	 * Some knock-off USB dongles incorrectly report their button count
+	 * as 13 instead of 16 causing three non-functional buttons.
+	 */
+	if ((sc->quirks & SIXAXIS_CONTROLLER_USB) && *rsize >= 45 &&
+		/* Report Count (13) */
+		rdesc[23] == 0x95 && rdesc[24] == 0x0D &&
+		/* Usage Maximum (13) */
+		rdesc[37] == 0x29 && rdesc[38] == 0x0D &&
+		/* Report Count (3) */
+		rdesc[43] == 0x95 && rdesc[44] == 0x03) {
+		hid_info(hdev, "Fixing up USB dongle report descriptor\n");
+		rdesc[24] = 0x10;
+		rdesc[38] = 0x10;
+		rdesc[44] = 0x00;
+	}
+
 	return rdesc;
 }
 

[PATCH 4.19 05/28] HID: i2c-hid: add Schneider SCL142ALM to descriptor override

[Greg Kroah-Hartman]

From: Julian Sax <jsbc@gmx.de>

commit 6507ef10660efdfee93f0f3b9fac24b5e4d83e56 upstream.

This device uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.

Cc: stable@vger.kernel.org
Signed-off-by: Julian Sax <jsbc@gmx.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
+++ b/drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c
@@ -381,6 +381,14 @@ static const struct dmi_system_id i2c_hi
 		},
 		.driver_data = (void *)&sipodev_desc
 	},
+	{
+		.ident = "Schneider SCL142ALM",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR, "SCHNEIDER"),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "SCL142ALM"),
+		},
+		.driver_data = (void *)&sipodev_desc
+	},
 	{ }	/* Terminate list */
 };
 

[PATCH 4.19 06/28] p54usb: add AirVasT USB stick device-id

[Greg Kroah-Hartman]

From: Giuseppe Marco Randazzo <gmrandazzo@gmail.com>

commit 63e49a9fdac1b4e97ac26cb3fe953f210d83bc53 upstream.

This patch adds the AirVasT USB wireless devices 124a:4026
to the list of supported devices. It's using the ISL3886
usb firmware. Without this modification, the wiki adapter
is not recognized.

Cc: <stable@vger.kernel.org>
Signed-off-by: Giuseppe Marco Randazzo <gmrandazzo@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [formatted, reworded]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200405220659.45621-1-chunkeey@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/intersil/p54/p54usb.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/net/wireless/intersil/p54/p54usb.c
+++ b/drivers/net/wireless/intersil/p54/p54usb.c
@@ -64,6 +64,7 @@ static const struct usb_device_id p54u_t
 	{USB_DEVICE(0x0db0, 0x6826)},	/* MSI UB54G (MS-6826) */
 	{USB_DEVICE(0x107b, 0x55f2)},	/* Gateway WGU-210 (Gemtek) */
 	{USB_DEVICE(0x124a, 0x4023)},	/* Shuttle PN15, Airvast WM168g, IOGear GWU513 */
+	{USB_DEVICE(0x124a, 0x4026)},	/* AirVasT USB wireless device */
 	{USB_DEVICE(0x1435, 0x0210)},	/* Inventel UR054G */
 	{USB_DEVICE(0x15a9, 0x0002)},	/* Gemtek WUBI-100GW 802.11g */
 	{USB_DEVICE(0x1630, 0x0005)},	/* 2Wire 802.11g USB (v1) / Z-Com */

[PATCH 4.19 07/28] kernel/relay.c: handle alloc_percpu returning NULL in relay_open

[Greg Kroah-Hartman]

From: Daniel Axtens <dja@axtens.net>

commit 54e200ab40fc14c863bcc80a51e20b7906608fce upstream.

alloc_percpu() may return NULL, which means chan->buf may be set to NULL.
In that case, when we do *per_cpu_ptr(chan->buf, ...), we dereference an
invalid pointer:

  BUG: Unable to handle kernel data access at 0x7dae0000
  Faulting instruction address: 0xc0000000003f3fec
  ...
  NIP relay_open+0x29c/0x600
  LR relay_open+0x270/0x600
  Call Trace:
     relay_open+0x264/0x600 (unreliable)
     __blk_trace_setup+0x254/0x600
     blk_trace_setup+0x68/0xa0
     sg_ioctl+0x7bc/0x2e80
     do_vfs_ioctl+0x13c/0x1300
     ksys_ioctl+0x94/0x130
     sys_ioctl+0x48/0xb0
     system_call+0x5c/0x68

Check if alloc_percpu returns NULL.

This was found by syzkaller both on x86 and powerpc, and the reproducer
it found on powerpc is capable of hitting the issue as an unprivileged
user.

Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Reported-by: syzbot+1e925b4b836afe85a1c6@syzkaller-ppc64.appspotmail.com
Reported-by: syzbot+587b2421926808309d21@syzkaller-ppc64.appspotmail.com
Reported-by: syzbot+58320b7171734bf79d26@syzkaller.appspotmail.com
Reported-by: syzbot+d6074fb08bdb2e010520@syzkaller.appspotmail.com
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: <stable@vger.kernel.org>	[4.10+]
Link: http://lkml.kernel.org/r/20191219121256.26480-1-dja@axtens.net
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/relay.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -581,6 +581,11 @@ struct rchan *relay_open(const char *bas
 		return NULL;
 
 	chan->buf = alloc_percpu(struct rchan_buf *);
+	if (!chan->buf) {
+		kfree(chan);
+		return NULL;
+	}
+
 	chan->version = RELAYFS_CHANNEL_VERSION;
 	chan->n_subbufs = n_subbufs;
 	chan->subbuf_size = subbuf_size;

[PATCH 4.19 08/28] mmc: fix compilation of user API

[Greg Kroah-Hartman]

From: Jérôme Pouiller <jerome.pouiller@silabs.com>

commit 83fc5dd57f86c3ec7d6d22565a6ff6c948853b64 upstream.

The definitions of MMC_IOC_CMD  and of MMC_IOC_MULTI_CMD rely on
MMC_BLOCK_MAJOR:

    #define MMC_IOC_CMD       _IOWR(MMC_BLOCK_MAJOR, 0, struct mmc_ioc_cmd)
    #define MMC_IOC_MULTI_CMD _IOWR(MMC_BLOCK_MAJOR, 1, struct mmc_ioc_multi_cmd)

However, MMC_BLOCK_MAJOR is defined in linux/major.h and
linux/mmc/ioctl.h did not include it.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200511161902.191405-1-Jerome.Pouiller@silabs.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/uapi/linux/mmc/ioctl.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/uapi/linux/mmc/ioctl.h
+++ b/include/uapi/linux/mmc/ioctl.h
@@ -3,6 +3,7 @@
 #define LINUX_MMC_IOCTL_H
 
 #include <linux/types.h>
+#include <linux/major.h>
 
 struct mmc_ioc_cmd {
 	/* Implies direction of data.  true = write, false = read */

[PATCH 4.19 09/28] scsi: ufs: Release clock if DMA map fails

[Greg Kroah-Hartman]

From: Can Guo <cang@codeaurora.org>

commit 17c7d35f141ef6158076adf3338f115f64fcf760 upstream.

In queuecommand path, if DMA map fails, it bails out with clock held.  In
this case, release the clock to keep its usage paired.

[mkp: applied by hand]

Link: https://lore.kernel.org/r/0101016ed3d66395-1b7e7fce-b74d-42ca-a88a-4db78b795d3b-000000@us-west-2.amazonses.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[EB: resolved cherry-pick conflict caused by newer kernels not having
 the clear_bit_unlock() line]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/scsi/ufs/ufshcd.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2505,6 +2505,7 @@ static int ufshcd_queuecommand(struct Sc
 
 	err = ufshcd_map_sg(hba, lrbp);
 	if (err) {
+		ufshcd_release(hba);
 		lrbp->cmd = NULL;
 		clear_bit_unlock(tag, &hba->lrb_in_use);
 		goto out;

[PATCH 4.19 10/28] net: dsa: mt7530: set CPU port to fallback mode

[Greg Kroah-Hartman]

From: DENG Qingfang <dqfext@gmail.com>

commit 38152ea37d8bdaffa22603e0a5b5b86cfa8714c9 upstream.

Currently, setting a bridge's self PVID to other value and deleting
the default VID 1 renders untagged ports of that VLAN unable to talk to
the CPU port:

	bridge vlan add dev br0 vid 2 pvid untagged self
	bridge vlan del dev br0 vid 1 self
	bridge vlan add dev sw0p0 vid 2 pvid untagged
	bridge vlan del dev sw0p0 vid 1
	# br0 cannot send untagged frames out of sw0p0 anymore

That is because the CPU port is set to security mode and its PVID is
still 1, and untagged frames are dropped due to VLAN member violation.

Set the CPU port to fallback mode so untagged frames can pass through.

Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/dsa/mt7530.c |   11 ++++++++---
 drivers/net/dsa/mt7530.h |    6 ++++++
 2 files changed, 14 insertions(+), 3 deletions(-)

--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -860,10 +860,15 @@ mt7530_port_set_vlan_aware(struct dsa_sw
 		   PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
 
 	/* Trapped into security mode allows packet forwarding through VLAN
-	 * table lookup.
+	 * table lookup. CPU port is set to fallback mode to let untagged
+	 * frames pass through.
 	 */
-	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
-		   MT7530_PORT_SECURITY_MODE);
+	if (dsa_is_cpu_port(ds, port))
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_FALLBACK_MODE);
+	else
+		mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
+			   MT7530_PORT_SECURITY_MODE);
 
 	/* Set the port as a user port which is to be able to recognize VID
 	 * from incoming packets before fetching entry within the VLAN table.
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -148,6 +148,12 @@ enum mt7530_port_mode {
 	/* Port Matrix Mode: Frames are forwarded by the PCR_MATRIX members. */
 	MT7530_PORT_MATRIX_MODE = PORT_VLAN(0),
 
+	/* Fallback Mode: Forward received frames with ingress ports that do
+	 * not belong to the VLAN member. Frames whose VID is not listed on
+	 * the VLAN table are forwarded by the PCR_MATRIX members.
+	 */
+	MT7530_PORT_FALLBACK_MODE = PORT_VLAN(1),
+
 	/* Security Mode: Discard any frame due to ingress membership
 	 * violation or VID missed on the VLAN table.
 	 */

[PATCH 4.19 11/28] airo: Fix read overflows sending packets

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 11e7a91994c29da96d847f676be023da6a2c1359 upstream.

The problem is that we always copy a minimum of ETH_ZLEN (60) bytes from
skb->data even when skb->len is less than ETH_ZLEN so it leads to a read
overflow.

The fix is to pad skb->data to at least ETH_ZLEN bytes.

Cc: <stable@vger.kernel.org>
Reported-by: Hu Jiahui <kirin.say@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200527184830.GA1164846@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/cisco/airo.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/net/wireless/cisco/airo.c
+++ b/drivers/net/wireless/cisco/airo.c
@@ -1928,6 +1928,10 @@ static netdev_tx_t mpi_start_xmit(struct
 		airo_print_err(dev->name, "%s: skb == NULL!",__func__);
 		return NETDEV_TX_OK;
 	}
+	if (skb_padto(skb, ETH_ZLEN)) {
+		dev->stats.tx_dropped++;
+		return NETDEV_TX_OK;
+	}
 	npacks = skb_queue_len (&ai->txq);
 
 	if (npacks >= MAXTXQ - 1) {
@@ -2130,6 +2134,10 @@ static netdev_tx_t airo_start_xmit(struc
 		airo_print_err(dev->name, "%s: skb == NULL!", __func__);
 		return NETDEV_TX_OK;
 	}
+	if (skb_padto(skb, ETH_ZLEN)) {
+		dev->stats.tx_dropped++;
+		return NETDEV_TX_OK;
+	}
 
 	/* Find a vacant FID */
 	for( i = 0; i < MAX_FIDS / 2 && (fids[i] & 0xffff0000); i++ );
@@ -2204,6 +2212,10 @@ static netdev_tx_t airo_start_xmit11(str
 		airo_print_err(dev->name, "%s: skb == NULL!", __func__);
 		return NETDEV_TX_OK;
 	}
+	if (skb_padto(skb, ETH_ZLEN)) {
+		dev->stats.tx_dropped++;
+		return NETDEV_TX_OK;
+	}
 
 	/* Find a vacant FID */
 	for( i = MAX_FIDS / 2; i < MAX_FIDS && (fids[i] & 0xffff0000); i++ );

[PATCH 4.19 12/28] drm/i915: fix port checks for MST support on gen >= 11

[Greg Kroah-Hartman]

From: Lucas De Marchi <lucas.demarchi@intel.com>

[ Upstream commit 10d987fd1b7baceaafa78d805e71427ab735b4e4 ]

Both Ice Lake and Elkhart Lake (gen 11) support MST on all external
connections except DDI A. Tiger Lake (gen 12) supports on all external
connections.

Move the check to happen inside intel_dp_mst_encoder_init() and add
specific platform checks.

v2: Replace != with == checks for ports on gen < 11 (Ville)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015164029.18431-3-lucas.demarchi@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/i915/intel_dp.c     |  7 ++-----
 drivers/gpu/drm/i915/intel_dp_mst.c | 22 ++++++++++++++++------
 2 files changed, 18 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 20cd4c8acecc..77a2f7fc2b37 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -6288,11 +6288,8 @@ intel_dp_init_connector(struct intel_digital_port *intel_dig_port,
 		intel_connector->get_hw_state = intel_connector_get_hw_state;
 
 	/* init MST on ports that can support it */
-	if (HAS_DP_MST(dev_priv) && !intel_dp_is_edp(intel_dp) &&
-	    (port == PORT_B || port == PORT_C ||
-	     port == PORT_D || port == PORT_F))
-		intel_dp_mst_encoder_init(intel_dig_port,
-					  intel_connector->base.base.id);
+	intel_dp_mst_encoder_init(intel_dig_port,
+				  intel_connector->base.base.id);
 
 	if (!intel_edp_init_connector(intel_dp, intel_connector)) {
 		intel_dp_aux_fini(intel_dp);
diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index 58ba14966d4f..c7d52c66ff29 100644
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -588,21 +588,31 @@ intel_dp_create_fake_mst_encoders(struct intel_digital_port *intel_dig_port)
 int
 intel_dp_mst_encoder_init(struct intel_digital_port *intel_dig_port, int conn_base_id)
 {
+	struct drm_i915_private *i915 = to_i915(intel_dig_port->base.base.dev);
 	struct intel_dp *intel_dp = &intel_dig_port->dp;
-	struct drm_device *dev = intel_dig_port->base.base.dev;
+	enum port port = intel_dig_port->base.port;
 	int ret;
 
-	intel_dp->can_mst = true;
+	if (!HAS_DP_MST(i915) || intel_dp_is_edp(intel_dp))
+		return 0;
+
+	if (INTEL_GEN(i915) < 12 && port == PORT_A)
+		return 0;
+
+	if (INTEL_GEN(i915) < 11 && port == PORT_E)
+		return 0;
+
 	intel_dp->mst_mgr.cbs = &mst_cbs;
 
 	/* create encoders */
 	intel_dp_create_fake_mst_encoders(intel_dig_port);
-	ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, dev,
+	ret = drm_dp_mst_topology_mgr_init(&intel_dp->mst_mgr, &i915->drm,
 					   &intel_dp->aux, 16, 3, conn_base_id);
-	if (ret) {
-		intel_dp->can_mst = false;
+	if (ret)
 		return ret;
-	}
+
+	intel_dp->can_mst = true;
+
 	return 0;
 }
 
-- 
2.25.1

[PATCH 4.19 13/28] scsi: hisi_sas: Check sas_port before using it

[Greg Kroah-Hartman]

From: Xiang Chen <chenxiang66@hisilicon.com>

[ Upstream commit 8c39673d5474b95374df2104dc1f65205c5278b8 ]

Need to check the structure sas_port before using it.

Link: https://lore.kernel.org/r/1573551059-107873-2-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 33191673249c..de4f41bce8e9 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -789,12 +789,13 @@ static void hisi_sas_port_notify_formed(struct asd_sas_phy *sas_phy)
 	struct hisi_hba *hisi_hba = sas_ha->lldd_ha;
 	struct hisi_sas_phy *phy = sas_phy->lldd_phy;
 	struct asd_sas_port *sas_port = sas_phy->port;
-	struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
+	struct hisi_sas_port *port;
 	unsigned long flags;
 
 	if (!sas_port)
 		return;
 
+	port = to_hisi_sas_port(sas_port);
 	spin_lock_irqsave(&hisi_hba->lock, flags);
 	port->port_attached = 1;
 	port->id = phy->port_id;
-- 
2.25.1

[PATCH 4.19 14/28] powerpc/powernv: Avoid re-registration of imc debugfs directory

[Greg Kroah-Hartman]

From: Anju T Sudhakar <anju@linux.vnet.ibm.com>

[ Upstream commit 48e626ac85b43cc589dd1b3b8004f7f85f03544d ]

export_imc_mode_and_cmd() function which creates the debugfs interface
for imc-mode and imc-command, is invoked when each nest pmu units is
registered.

When the first nest pmu unit is registered, export_imc_mode_and_cmd()
creates 'imc' directory under `/debug/powerpc/`. In the subsequent
invocations debugfs_create_dir() function returns, since the directory
already exists.

The recent commit <c33d442328f55> (debugfs: make error message a bit
more verbose), throws a warning if we try to invoke
`debugfs_create_dir()` with an already existing directory name.

Address this warning by making the debugfs directory registration in
the opal_imc_counters_probe() function, i.e invoke
export_imc_mode_and_cmd() function from the probe function.

Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Tested-by: Nageswara R Sastry <nasastry@in.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191127072035.4283-1-anju@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/opal-imc.c | 39 ++++++++++-------------
 1 file changed, 16 insertions(+), 23 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c
index 649fb268f446..5399682797d0 100644
--- a/arch/powerpc/platforms/powernv/opal-imc.c
+++ b/arch/powerpc/platforms/powernv/opal-imc.c
@@ -63,10 +63,6 @@ static void export_imc_mode_and_cmd(struct device_node *node,
 
 	imc_debugfs_parent = debugfs_create_dir("imc", powerpc_debugfs_root);
 
-	/*
-	 * Return here, either because 'imc' directory already exists,
-	 * Or failed to create a new one.
-	 */
 	if (!imc_debugfs_parent)
 		return;
 
@@ -139,7 +135,6 @@ static int imc_get_mem_addr_nest(struct device_node *node,
 	}
 
 	pmu_ptr->imc_counter_mmaped = true;
-	export_imc_mode_and_cmd(node, pmu_ptr);
 	kfree(base_addr_arr);
 	kfree(chipid_arr);
 	return 0;
@@ -155,7 +150,7 @@ static int imc_get_mem_addr_nest(struct device_node *node,
  *		    and domain as the inputs.
  * Allocates memory for the struct imc_pmu, sets up its domain, size and offsets
  */
-static int imc_pmu_create(struct device_node *parent, int pmu_index, int domain)
+static struct imc_pmu *imc_pmu_create(struct device_node *parent, int pmu_index, int domain)
 {
 	int ret = 0;
 	struct imc_pmu *pmu_ptr;
@@ -163,27 +158,23 @@ static int imc_pmu_create(struct device_node *parent, int pmu_index, int domain)
 
 	/* Return for unknown domain */
 	if (domain < 0)
-		return -EINVAL;
+		return NULL;
 
 	/* memory for pmu */
 	pmu_ptr = kzalloc(sizeof(*pmu_ptr), GFP_KERNEL);
 	if (!pmu_ptr)
-		return -ENOMEM;
+		return NULL;
 
 	/* Set the domain */
 	pmu_ptr->domain = domain;
 
 	ret = of_property_read_u32(parent, "size", &pmu_ptr->counter_mem_size);
-	if (ret) {
-		ret = -EINVAL;
+	if (ret)
 		goto free_pmu;
-	}
 
 	if (!of_property_read_u32(parent, "offset", &offset)) {
-		if (imc_get_mem_addr_nest(parent, pmu_ptr, offset)) {
-			ret = -EINVAL;
+		if (imc_get_mem_addr_nest(parent, pmu_ptr, offset))
 			goto free_pmu;
-		}
 	}
 
 	/* Function to register IMC pmu */
@@ -194,14 +185,14 @@ static int imc_pmu_create(struct device_node *parent, int pmu_index, int domain)
 		if (pmu_ptr->domain == IMC_DOMAIN_NEST)
 			kfree(pmu_ptr->mem_info);
 		kfree(pmu_ptr);
-		return ret;
+		return NULL;
 	}
 
-	return 0;
+	return pmu_ptr;
 
 free_pmu:
 	kfree(pmu_ptr);
-	return ret;
+	return NULL;
 }
 
 static void disable_nest_pmu_counters(void)
@@ -258,6 +249,7 @@ int get_max_nest_dev(void)
 static int opal_imc_counters_probe(struct platform_device *pdev)
 {
 	struct device_node *imc_dev = pdev->dev.of_node;
+	struct imc_pmu *pmu;
 	int pmu_count = 0, domain;
 	bool core_imc_reg = false, thread_imc_reg = false;
 	u32 type;
@@ -273,6 +265,7 @@ static int opal_imc_counters_probe(struct platform_device *pdev)
 	}
 
 	for_each_compatible_node(imc_dev, NULL, IMC_DTB_UNIT_COMPAT) {
+		pmu = NULL;
 		if (of_property_read_u32(imc_dev, "type", &type)) {
 			pr_warn("IMC Device without type property\n");
 			continue;
@@ -294,9 +287,13 @@ static int opal_imc_counters_probe(struct platform_device *pdev)
 			break;
 		}
 
-		if (!imc_pmu_create(imc_dev, pmu_count, domain)) {
-			if (domain == IMC_DOMAIN_NEST)
+		pmu = imc_pmu_create(imc_dev, pmu_count, domain);
+		if (pmu != NULL) {
+			if (domain == IMC_DOMAIN_NEST) {
+				if (!imc_debugfs_parent)
+					export_imc_mode_and_cmd(imc_dev, pmu);
 				pmu_count++;
+			}
 			if (domain == IMC_DOMAIN_CORE)
 				core_imc_reg = true;
 			if (domain == IMC_DOMAIN_THREAD)
@@ -304,10 +301,6 @@ static int opal_imc_counters_probe(struct platform_device *pdev)
 		}
 	}
 
-	/* If none of the nest units are registered, remove debugfs interface */
-	if (pmu_count == 0)
-		debugfs_remove_recursive(imc_debugfs_parent);
-
 	/* If core imc is not registered, unregister thread-imc */
 	if (!core_imc_reg && thread_imc_reg)
 		unregister_thread_imc();
-- 
2.25.1

[PATCH 4.19 15/28] spi: dw: use "smp_mb()" to avoid sending spi data error

[Greg Kroah-Hartman]

From: Xinwei Kong <kong.kongxinwei@hisilicon.com>

[ Upstream commit bfda044533b213985bc62bd7ca96f2b984d21b80 ]

Because of out-of-order execution about some CPU architecture,
In this debug stage we find Completing spi interrupt enable ->
prodrucing TXEI interrupt -> running "interrupt_transfer" function
will prior to set "dw->rx and dws->rx_end" data, so this patch add
memory barrier to enable dw->rx and dw->rx_end to be visible and
solve to send SPI data error.
eg:
it will fix to this following low possibility error in testing environment
which using SPI control to connect TPM Modules

kernel: tpm tpm0: Operation Timed out
kernel: tpm tpm0: tpm_relinquish_locality: : error -1

Signed-off-by: fengsheng <fengsheng5@huawei.com>
Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Link: https://lore.kernel.org/r/1578019930-55858-1-git-send-email-kong.kongxinwei@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-dw.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 5a47e28e38c1..6f0f6b99953d 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -304,6 +304,9 @@ static int dw_spi_transfer_one(struct spi_controller *master,
 	dws->len = transfer->len;
 	spin_unlock_irqrestore(&dws->buf_lock, flags);
 
+	/* Ensure dw->rx and dw->rx_end are visible */
+	smp_mb();
+
 	spi_enable_chip(dws, 0);
 
 	/* Handle per transfer options for bpw and speed */
-- 
2.25.1

Re: [PATCH 4.19 15/28] spi: dw: use "smp_mb()" to avoid sending spi data error

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1009 bytes --]

Hi!

> Because of out-of-order execution about some CPU architecture,
> In this debug stage we find Completing spi interrupt enable ->
> prodrucing TXEI interrupt -> running "interrupt_transfer" function
> will prior to set "dw->rx and dws->rx_end" data, so this patch add
> memory barrier to enable dw->rx and dw->rx_end to be visible and
> solve to send SPI data error.

So, this is apparently CPU-vs-device issue...

> +++ b/drivers/spi/spi-dw.c
> @@ -304,6 +304,9 @@ static int dw_spi_transfer_one(struct spi_controller *master,
>  	dws->len = transfer->len;
>  	spin_unlock_irqrestore(&dws->buf_lock, flags);
>  
> +	/* Ensure dw->rx and dw->rx_end are visible */
> +	smp_mb();
> +

But we use SMP-only memory barrier, thus the bug will still be there
in single-processor configurations. Should this be mb()?

Best regards,
								Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

Re: [PATCH 4.19 15/28] spi: dw: use "smp_mb()" to avoid sending spi data error

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 671 bytes --]

On Sun, Jun 07, 2020 at 10:09:11PM +0200, Pavel Machek wrote:

> > Because of out-of-order execution about some CPU architecture,
> > In this debug stage we find Completing spi interrupt enable ->
> > prodrucing TXEI interrupt -> running "interrupt_transfer" function
> > will prior to set "dw->rx and dws->rx_end" data, so this patch add
> > memory barrier to enable dw->rx and dw->rx_end to be visible and
> > solve to send SPI data error.

> So, this is apparently CPU-vs-device issue...

The commit message is a bit unclear but my read had been interrupt
handler racing with sending new data rather than an ordering issue with
writes to the hardware.  

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 4.19 15/28] spi: dw: use "smp_mb()" to avoid sending spi data error

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 965 bytes --]

On Mon 2020-06-08 12:16:19, Mark Brown wrote:
> On Sun, Jun 07, 2020 at 10:09:11PM +0200, Pavel Machek wrote:
> 
> > > Because of out-of-order execution about some CPU architecture,
> > > In this debug stage we find Completing spi interrupt enable ->
> > > prodrucing TXEI interrupt -> running "interrupt_transfer" function
> > > will prior to set "dw->rx and dws->rx_end" data, so this patch add
> > > memory barrier to enable dw->rx and dw->rx_end to be visible and
> > > solve to send SPI data error.
> 
> > So, this is apparently CPU-vs-device issue...
> 
> The commit message is a bit unclear but my read had been interrupt
> handler racing with sending new data rather than an ordering issue with
> writes to the hardware.  

Aha, patch makes sense, then. Thanks for explanation!
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]

[PATCH 4.19 16/28] s390/ftrace: save traced function caller

[Greg Kroah-Hartman]

From: Vasily Gorbik <gor@linux.ibm.com>

[ Upstream commit b4adfe55915d8363e244e42386d69567db1719b9 ]

A typical backtrace acquired from ftraced function currently looks like
the following (e.g. for "path_openat"):

arch_stack_walk+0x15c/0x2d8
stack_trace_save+0x50/0x68
stack_trace_call+0x15a/0x3b8
ftrace_graph_caller+0x0/0x1c
0x3e0007e3c98 <- ftraced function caller (should be do_filp_open+0x7c/0xe8)
do_open_execat+0x70/0x1b8
__do_execve_file.isra.0+0x7d8/0x860
__s390x_sys_execve+0x56/0x68
system_call+0xdc/0x2d8

Note random "0x3e0007e3c98" stack value as ftraced function caller. This
value causes either imprecise unwinder result or unwinding failure.
That "0x3e0007e3c98" comes from r14 of ftraced function stack frame, which
it haven't had a chance to initialize since the very first instruction
calls ftrace code ("ftrace_caller"). (ftraced function might never
save r14 as well). Nevertheless according to s390 ABI any function
is called with stack frame allocated for it and r14 contains return
address. "ftrace_caller" itself is called with "brasl %r0,ftrace_caller".
So, to fix this issue simply always save traced function caller onto
ftraced function stack frame.

Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/kernel/mcount.S | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S
index 83afd5b78e16..020f9aac7dc0 100644
--- a/arch/s390/kernel/mcount.S
+++ b/arch/s390/kernel/mcount.S
@@ -40,6 +40,7 @@ EXPORT_SYMBOL(_mcount)
 ENTRY(ftrace_caller)
 	.globl	ftrace_regs_caller
 	.set	ftrace_regs_caller,ftrace_caller
+	stg	%r14,(__SF_GPRS+8*8)(%r15)	# save traced function caller
 	lgr	%r1,%r15
 #if !(defined(CC_USING_HOTPATCH) || defined(CC_USING_NOP_MCOUNT))
 	aghi	%r0,MCOUNT_RETURN_FIXUP
-- 
2.25.1

[PATCH 4.19 17/28] ARC: Fix ICCM & DCCM runtime size checks

[Greg Kroah-Hartman]

From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>

[ Upstream commit 43900edf67d7ef3ac8909854d75b8a1fba2d570c ]

As of today the ICCM and DCCM size checks are incorrectly using
mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ
and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in
runtime and stored in cpu->dccm.sz and cpu->iccm.sz is in bytes.

Fix that.

Reported-by: Paul Greco <pmgreco@us.ibm.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/kernel/setup.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 89c97dcfa360..c10994daee39 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -15,6 +15,7 @@
 #include <linux/clocksource.h>
 #include <linux/console.h>
 #include <linux/module.h>
+#include <linux/sizes.h>
 #include <linux/cpu.h>
 #include <linux/of_fdt.h>
 #include <linux/of.h>
@@ -406,12 +407,12 @@ static void arc_chk_core_config(void)
 	if ((unsigned int)__arc_dccm_base != cpu->dccm.base_addr)
 		panic("Linux built with incorrect DCCM Base address\n");
 
-	if (CONFIG_ARC_DCCM_SZ != cpu->dccm.sz)
+	if (CONFIG_ARC_DCCM_SZ * SZ_1K != cpu->dccm.sz)
 		panic("Linux built with incorrect DCCM Size\n");
 #endif
 
 #ifdef CONFIG_ARC_HAS_ICCM
-	if (CONFIG_ARC_ICCM_SZ != cpu->iccm.sz)
+	if (CONFIG_ARC_ICCM_SZ * SZ_1K != cpu->iccm.sz)
 		panic("Linux built with incorrect ICCM Size\n");
 #endif
 
-- 
2.25.1

[PATCH 4.19 18/28] ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT

[Greg Kroah-Hartman]

From: Vineet Gupta <vgupta@synopsys.com>

[ Upstream commit 799587d5731db9dcdafaac4002463aa7d9cd6cf7 ]

Elide invalid configuration EZNPS + ARCv2, triggered by a
make allyesconfig build.

Granted the root cause is in source code (asm/barrier.h) where we check
for ARCv2 before PLAT_EZNPS, but it is better to avoid such combinations
at onset rather then baking subtle nuances into code.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arc/plat-eznps/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arc/plat-eznps/Kconfig b/arch/arc/plat-eznps/Kconfig
index ce908e2c5282..71378bfec8d0 100644
--- a/arch/arc/plat-eznps/Kconfig
+++ b/arch/arc/plat-eznps/Kconfig
@@ -6,6 +6,7 @@
 
 menuconfig ARC_PLAT_EZNPS
 	bool "\"EZchip\" ARC dev platform"
+	depends on ISA_ARCOMPACT
 	select CPU_BIG_ENDIAN
 	select CLKSRC_NPS if !PHYS_ADDR_T_64BIT
 	select EZNPS_GIC
-- 
2.25.1

[PATCH 4.19 19/28] evm: Fix RCU list related warnings

[Greg Kroah-Hartman]

From: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>

[ Upstream commit 770f60586d2af0590be263f55fd079226313922c ]

This patch fixes the following warning and few other instances of
traversal of evm_config_xattrnames list:

[   32.848432] =============================
[   32.848707] WARNING: suspicious RCU usage
[   32.848966] 5.7.0-rc1-00006-ga8d5875ce5f0b #1 Not tainted
[   32.849308] -----------------------------
[   32.849567] security/integrity/evm/evm_main.c:231 RCU-list traversed in non-reader section!!

Since entries are only added to the list and never deleted, use
list_for_each_entry_lockless() instead of list_for_each_entry_rcu for
traversing the list.  Also, add a relevant comment in evm_secfs.c to
indicate this fact.

Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org> (RCU viewpoint)
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/integrity/evm/evm_crypto.c | 2 +-
 security/integrity/evm/evm_main.c   | 4 ++--
 security/integrity/evm/evm_secfs.c  | 9 ++++++++-
 3 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c
index f0878d81dcef..d20f5792761c 100644
--- a/security/integrity/evm/evm_crypto.c
+++ b/security/integrity/evm/evm_crypto.c
@@ -215,7 +215,7 @@ static int evm_calc_hmac_or_hash(struct dentry *dentry,
 	data->hdr.length = crypto_shash_digestsize(desc->tfm);
 
 	error = -ENODATA;
-	list_for_each_entry_rcu(xattr, &evm_config_xattrnames, list) {
+	list_for_each_entry_lockless(xattr, &evm_config_xattrnames, list) {
 		bool is_ima = false;
 
 		if (strcmp(xattr->name, XATTR_NAME_IMA) == 0)
diff --git a/security/integrity/evm/evm_main.c b/security/integrity/evm/evm_main.c
index 7f3f54d89a6e..e11d860fdce4 100644
--- a/security/integrity/evm/evm_main.c
+++ b/security/integrity/evm/evm_main.c
@@ -102,7 +102,7 @@ static int evm_find_protected_xattrs(struct dentry *dentry)
 	if (!(inode->i_opflags & IOP_XATTR))
 		return -EOPNOTSUPP;
 
-	list_for_each_entry_rcu(xattr, &evm_config_xattrnames, list) {
+	list_for_each_entry_lockless(xattr, &evm_config_xattrnames, list) {
 		error = __vfs_getxattr(dentry, inode, xattr->name, NULL, 0);
 		if (error < 0) {
 			if (error == -ENODATA)
@@ -233,7 +233,7 @@ static int evm_protected_xattr(const char *req_xattr_name)
 	struct xattr_list *xattr;
 
 	namelen = strlen(req_xattr_name);
-	list_for_each_entry_rcu(xattr, &evm_config_xattrnames, list) {
+	list_for_each_entry_lockless(xattr, &evm_config_xattrnames, list) {
 		if ((strlen(xattr->name) == namelen)
 		    && (strncmp(req_xattr_name, xattr->name, namelen) == 0)) {
 			found = 1;
diff --git a/security/integrity/evm/evm_secfs.c b/security/integrity/evm/evm_secfs.c
index 77de71b7794c..f112ca593adc 100644
--- a/security/integrity/evm/evm_secfs.c
+++ b/security/integrity/evm/evm_secfs.c
@@ -237,7 +237,14 @@ static ssize_t evm_write_xattrs(struct file *file, const char __user *buf,
 		goto out;
 	}
 
-	/* Guard against races in evm_read_xattrs */
+	/*
+	 * xattr_list_mutex guards against races in evm_read_xattrs().
+	 * Entries are only added to the evm_config_xattrnames list
+	 * and never deleted. Therefore, the list is traversed
+	 * using list_for_each_entry_lockless() without holding
+	 * the mutex in evm_calc_hmac_or_hash(), evm_find_protected_xattrs()
+	 * and evm_protected_xattr().
+	 */
 	mutex_lock(&xattr_list_mutex);
 	list_for_each_entry(tmp, &evm_config_xattrnames, list) {
 		if (strcmp(xattr->name, tmp->name) == 0) {
-- 
2.25.1

[PATCH 4.19 20/28] i2c: altera: Fix race between xfer_msg and isr thread

[Greg Kroah-Hartman]

From: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>

[ Upstream commit 5d4c7977499a736f3f80826bdc9744344ad55589 ]

Use a mutex to protect access to idev->msg_len, idev->buf, etc. which
are modified by both altr_i2c_xfer_msg() and altr_i2c_isr().

This is the minimal fix for easy backporting. A cleanup to remove the
spinlock will be added later.

Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
[wsa: updated commit message]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-altera.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-altera.c b/drivers/i2c/busses/i2c-altera.c
index 8915ee30a5b4..1d59eede537b 100644
--- a/drivers/i2c/busses/i2c-altera.c
+++ b/drivers/i2c/busses/i2c-altera.c
@@ -81,6 +81,7 @@
  * @isr_mask: cached copy of local ISR enables.
  * @isr_status: cached copy of local ISR status.
  * @lock: spinlock for IRQ synchronization.
+ * @isr_mutex: mutex for IRQ thread.
  */
 struct altr_i2c_dev {
 	void __iomem *base;
@@ -97,6 +98,7 @@ struct altr_i2c_dev {
 	u32 isr_mask;
 	u32 isr_status;
 	spinlock_t lock;	/* IRQ synchronization */
+	struct mutex isr_mutex;
 };
 
 static void
@@ -256,10 +258,11 @@ static irqreturn_t altr_i2c_isr(int irq, void *_dev)
 	struct altr_i2c_dev *idev = _dev;
 	u32 status = idev->isr_status;
 
+	mutex_lock(&idev->isr_mutex);
 	if (!idev->msg) {
 		dev_warn(idev->dev, "unexpected interrupt\n");
 		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
-		return IRQ_HANDLED;
+		goto out;
 	}
 	read = (idev->msg->flags & I2C_M_RD) != 0;
 
@@ -312,6 +315,8 @@ static irqreturn_t altr_i2c_isr(int irq, void *_dev)
 		complete(&idev->msg_complete);
 		dev_dbg(idev->dev, "Message Complete\n");
 	}
+out:
+	mutex_unlock(&idev->isr_mutex);
 
 	return IRQ_HANDLED;
 }
@@ -323,6 +328,7 @@ static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg)
 	u32 value;
 	u8 addr = i2c_8bit_addr_from_msg(msg);
 
+	mutex_lock(&idev->isr_mutex);
 	idev->msg = msg;
 	idev->msg_len = msg->len;
 	idev->buf = msg->buf;
@@ -347,6 +353,7 @@ static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg)
 		altr_i2c_int_enable(idev, imask, true);
 		altr_i2c_fill_tx_fifo(idev);
 	}
+	mutex_unlock(&idev->isr_mutex);
 
 	time_left = wait_for_completion_timeout(&idev->msg_complete,
 						ALTR_I2C_XFER_TIMEOUT);
@@ -420,6 +427,7 @@ static int altr_i2c_probe(struct platform_device *pdev)
 	idev->dev = &pdev->dev;
 	init_completion(&idev->msg_complete);
 	spin_lock_init(&idev->lock);
+	mutex_init(&idev->isr_mutex);
 
 	ret = device_property_read_u32(idev->dev, "fifo-size",
 				       &idev->fifo_size);
-- 
2.25.1

[PATCH 4.19 21/28] x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit d7110a26e5905ec2fe3fc88bc6a538901accb72b ]

When building with Clang + -Wtautological-compare and
CONFIG_CPUMASK_OFFSTACK unset:

  arch/x86/mm/mmio-mod.c:375:6: warning: comparison of array 'downed_cpus'
  equal to a null pointer is always false [-Wtautological-pointer-compare]
          if (downed_cpus == NULL &&
              ^~~~~~~~~~~    ~~~~
  arch/x86/mm/mmio-mod.c:405:6: warning: comparison of array 'downed_cpus'
  equal to a null pointer is always false [-Wtautological-pointer-compare]
          if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
              ^~~~~~~~~~~    ~~~~
  2 warnings generated.

Commit

  f7e30f01a9e2 ("cpumask: Add helper cpumask_available()")

added cpumask_available() to fix warnings of this nature. Use that here
so that clang does not warn regardless of CONFIG_CPUMASK_OFFSTACK's
value.

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/982
Link: https://lkml.kernel.org/r/20200408205323.44490-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/mm/mmio-mod.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
index 2c1ecf4763c4..e32b003e064a 100644
--- a/arch/x86/mm/mmio-mod.c
+++ b/arch/x86/mm/mmio-mod.c
@@ -384,7 +384,7 @@ static void enter_uniprocessor(void)
 	int cpu;
 	int err;
 
-	if (downed_cpus == NULL &&
+	if (!cpumask_available(downed_cpus) &&
 	    !alloc_cpumask_var(&downed_cpus, GFP_KERNEL)) {
 		pr_notice("Failed to allocate mask\n");
 		goto out;
@@ -414,7 +414,7 @@ static void leave_uniprocessor(void)
 	int cpu;
 	int err;
 
-	if (downed_cpus == NULL || cpumask_weight(downed_cpus) == 0)
+	if (!cpumask_available(downed_cpus) || cpumask_weight(downed_cpus) == 0)
 		return;
 	pr_notice("Re-enabling CPUs...\n");
 	for_each_cpu(cpu, downed_cpus) {
-- 
2.25.1

[PATCH 4.19 22/28] net: bmac: Fix read of MAC address from ROM

[Greg Kroah-Hartman]

From: Jeremy Kerr <jk@ozlabs.org>

[ Upstream commit ef01cee2ee1b369c57a936166483d40942bcc3e3 ]

In bmac_get_station_address, We're reading two bytes at a time from ROM,
but we do that six times, resulting in 12 bytes of read & writes. This
means we will write off the end of the six-byte destination buffer.

This change fixes the for-loop to only read/write six bytes.

Based on a proposed fix from Finn Thain <fthain@telegraphics.com.au>.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reported-by: Stan Johnson <userm57@yahoo.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Reported-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/apple/bmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/apple/bmac.c b/drivers/net/ethernet/apple/bmac.c
index 6a8e2567f2bd..ab6ce85540b8 100644
--- a/drivers/net/ethernet/apple/bmac.c
+++ b/drivers/net/ethernet/apple/bmac.c
@@ -1181,7 +1181,7 @@ bmac_get_station_address(struct net_device *dev, unsigned char *ea)
 	int i;
 	unsigned short data;
 
-	for (i = 0; i < 6; i++)
+	for (i = 0; i < 3; i++)
 		{
 			reset_and_select_srom(dev);
 			data = read_srom(dev, i + EnetAddressOffset/2, SROMAddressBits);
-- 
2.25.1

[PATCH 4.19 23/28] drm/edid: Add Oculus Rift S to non-desktop list

[Greg Kroah-Hartman]

From: Jan Schmidt <jan@centricular.com>

[ Upstream commit 5a3f610877e9d08968ea7237551049581f02b163 ]

Add a quirk for the Oculus Rift S OVR0012 display so
it shows up as a non-desktop display.

Signed-off-by: Jan Schmidt <jan@centricular.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200507180628.740936-1-jan@centricular.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_edid.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index d5dcee7f1fc8..108f542176b8 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -198,10 +198,11 @@ static const struct edid_quirk {
 	{ "HVR", 0xaa01, EDID_QUIRK_NON_DESKTOP },
 	{ "HVR", 0xaa02, EDID_QUIRK_NON_DESKTOP },
 
-	/* Oculus Rift DK1, DK2, and CV1 VR Headsets */
+	/* Oculus Rift DK1, DK2, CV1 and Rift S VR Headsets */
 	{ "OVR", 0x0001, EDID_QUIRK_NON_DESKTOP },
 	{ "OVR", 0x0003, EDID_QUIRK_NON_DESKTOP },
 	{ "OVR", 0x0004, EDID_QUIRK_NON_DESKTOP },
+	{ "OVR", 0x0012, EDID_QUIRK_NON_DESKTOP },
 
 	/* Windows Mixed Reality Headsets */
 	{ "ACR", 0x7fce, EDID_QUIRK_NON_DESKTOP },
-- 
2.25.1

[PATCH 4.19 24/28] s390/mm: fix set_huge_pte_at() for empty ptes

[Greg Kroah-Hartman]

From: Gerald Schaefer <gerald.schaefer@de.ibm.com>

[ Upstream commit ac8372f3b4e41015549b331a4f350224661e7fc6 ]

On s390, the layout of normal and large ptes (i.e. pmds/puds) differs.
Therefore, set_huge_pte_at() does a conversion from a normal pte to
the corresponding large pmd/pud. So, when converting an empty pte, this
should result in an empty pmd/pud, which would return true for
pmd/pud_none().

However, after conversion we also mark the pmd/pud as large, and
therefore present. For empty ptes, this will result in an empty pmd/pud
that is also marked as large, and pmd/pud_none() would not return true.

There is currently no issue with this behaviour, as set_huge_pte_at()
does not seem to be called for empty ptes. It would be valid though, so
let's fix this by not marking empty ptes as large in set_huge_pte_at().

This was found by testing a patch from from Anshuman Khandual, which is
currently discussed on LKML ("mm/debug: Add more arch page table helper
tests").

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/mm/hugetlbpage.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index 5674710a4841..7dfae86afa47 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -159,10 +159,13 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		rste &= ~_SEGMENT_ENTRY_NOEXEC;
 
 	/* Set correct table type for 2G hugepages */
-	if ((pte_val(*ptep) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3)
-		rste |= _REGION_ENTRY_TYPE_R3 | _REGION3_ENTRY_LARGE;
-	else
+	if ((pte_val(*ptep) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3) {
+		if (likely(pte_present(pte)))
+			rste |= _REGION3_ENTRY_LARGE;
+		rste |= _REGION_ENTRY_TYPE_R3;
+	} else if (likely(pte_present(pte)))
 		rste |= _SEGMENT_ENTRY_LARGE;
+
 	clear_huge_pte_skeys(mm, rste);
 	pte_val(*ptep) = rste;
 }
-- 
2.25.1

[PATCH 4.19 25/28] null_blk: return error for invalid zone size

[Greg Kroah-Hartman]

From: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>

[ Upstream commit e274832590211c4b1b1e807ca66fad8b5bb8b328 ]

In null_init_zone_dev() check if the zone size is larger than device
capacity, return error if needed.

This also fixes the following oops :-

null_blk: changed the number of conventional zones to 4294967295
BUG: kernel NULL pointer dereference, address: 0000000000000010
PGD 7d76c5067 P4D 7d76c5067 PUD 7d240c067 PMD 0
Oops: 0002 [#1] SMP NOPTI
CPU: 4 PID: 5508 Comm: nullbtests.sh Tainted: G OE 5.7.0-rc4lblk-fnext0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e4
RIP: 0010:null_init_zoned_dev+0x17a/0x27f [null_blk]
RSP: 0018:ffffc90007007e00 EFLAGS: 00010246
RAX: 0000000000000020 RBX: ffff8887fb3f3c00 RCX: 0000000000000007
RDX: 0000000000000000 RSI: ffff8887ca09d688 RDI: ffff888810fea510
RBP: 0000000000000010 R08: ffff8887ca09d688 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8887c26e8000
R13: ffffffffa05e9390 R14: 0000000000000000 R15: 0000000000000001
FS:  00007fcb5256f740(0000) GS:ffff888810e00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000081e8fe000 CR4: 00000000003406e0
Call Trace:
 null_add_dev+0x534/0x71b [null_blk]
 nullb_device_power_store.cold.41+0x8/0x2e [null_blk]
 configfs_write_file+0xe6/0x150
 vfs_write+0xba/0x1e0
 ksys_write+0x5f/0xe0
 do_syscall_64+0x60/0x250
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x7fcb51c71840

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk_zoned.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/block/null_blk_zoned.c b/drivers/block/null_blk_zoned.c
index 7c6b86d98700..d1725ac636c0 100644
--- a/drivers/block/null_blk_zoned.c
+++ b/drivers/block/null_blk_zoned.c
@@ -20,6 +20,10 @@ int null_zone_init(struct nullb_device *dev)
 		pr_err("null_blk: zone_size must be power-of-two\n");
 		return -EINVAL;
 	}
+	if (dev->zone_size > dev->size) {
+		pr_err("Zone size larger than device capacity\n");
+		return -EINVAL;
+	}
 
 	dev->zone_size_sects = dev->zone_size << ZONE_SIZE_SHIFT;
 	dev->nr_zones = dev_size >>
-- 
2.25.1

[PATCH 4.19 26/28] net/ethernet/freescale: rework quiesce/activate for ucc_geth

[Greg Kroah-Hartman]

From: Valentin Longchamp <valentin@longchamp.me>

[ Upstream commit 79dde73cf9bcf1dd317a2667f78b758e9fe139ed ]

ugeth_quiesce/activate are used to halt the controller when there is a
link change that requires to reconfigure the mac.

The previous implementation called netif_device_detach(). This however
causes the initial activation of the netdevice to fail precisely because
it's detached. For details, see [1].

A possible workaround was the revert of commit
net: linkwatch: add check for netdevice being present to linkwatch_do_dev
However, the check introduced in the above commit is correct and shall be
kept.

The netif_device_detach() is thus replaced with
netif_tx_stop_all_queues() that prevents any tranmission. This allows to
perform mac config change required by the link change, without detaching
the corresponding netdevice and thus not preventing its initial
activation.

[1] https://lists.openwall.net/netdev/2020/01/08/201

Signed-off-by: Valentin Longchamp <valentin@longchamp.me>
Acked-by: Matteo Ghidoni <matteo.ghidoni@ch.abb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/freescale/ucc_geth.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index a5bf02ae4bc5..5de6f7c73c1f 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -45,6 +45,7 @@
 #include <soc/fsl/qe/ucc.h>
 #include <soc/fsl/qe/ucc_fast.h>
 #include <asm/machdep.h>
+#include <net/sch_generic.h>
 
 #include "ucc_geth.h"
 
@@ -1551,11 +1552,8 @@ static int ugeth_disable(struct ucc_geth_private *ugeth, enum comm_dir mode)
 
 static void ugeth_quiesce(struct ucc_geth_private *ugeth)
 {
-	/* Prevent any further xmits, plus detach the device. */
-	netif_device_detach(ugeth->ndev);
-
-	/* Wait for any current xmits to finish. */
-	netif_tx_disable(ugeth->ndev);
+	/* Prevent any further xmits */
+	netif_tx_stop_all_queues(ugeth->ndev);
 
 	/* Disable the interrupt to avoid NAPI rescheduling. */
 	disable_irq(ugeth->ug_info->uf_info.irq);
@@ -1568,7 +1566,10 @@ static void ugeth_activate(struct ucc_geth_private *ugeth)
 {
 	napi_enable(&ugeth->napi);
 	enable_irq(ugeth->ug_info->uf_info.irq);
-	netif_device_attach(ugeth->ndev);
+
+	/* allow to xmit again  */
+	netif_tx_wake_all_queues(ugeth->ndev);
+	__netdev_watchdog_up(ugeth->ndev);
 }
 
 /* Called every time the controller might need to be made
-- 
2.25.1

[PATCH 4.19 27/28] net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x

[Greg Kroah-Hartman]

From: Jonathan McDowell <noodles@earth.li>

[ Upstream commit a96ac8a0045e3cbe3e5af6d1b3c78c6c2065dec5 ]

The ipq806x_gmac_probe() function enables the PTP clock but not the
appropriate interface clocks. This means that if the bootloader hasn't
done so attempting to bring up the interface will fail with an error
like:

[   59.028131] ipq806x-gmac-dwmac 37600000.ethernet: Failed to reset the dma
[   59.028196] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_hw_setup: DMA engine initialization failed
[   59.034056] ipq806x-gmac-dwmac 37600000.ethernet eth1: stmmac_open: Hw setup failed

This patch, a slightly cleaned up version of one posted by Sergey
Sergeev in:

https://forum.openwrt.org/t/support-for-mikrotik-rb3011uias-rm/4064/257

correctly enables the clock; we have already configured the source just
before this.

Tested on a MikroTik RB3011.

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
index 0d21082ceb93..4d75158c64b2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
@@ -318,6 +318,19 @@ static int ipq806x_gmac_probe(struct platform_device *pdev)
 	/* Enable PTP clock */
 	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
 	val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
+	switch (gmac->phy_mode) {
+	case PHY_INTERFACE_MODE_RGMII:
+		val |= NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
+			NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		val |= NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
+				NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
+		break;
+	default:
+		/* We don't get here; the switch above will have errored out */
+		unreachable();
+	}
 	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
 
 	if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
-- 
2.25.1

[PATCH 4.19 28/28] net: smsc911x: Fix runtime PM imbalance on error

[Greg Kroah-Hartman]

From: Dinghao Liu <dinghao.liu@zju.edu.cn>

[ Upstream commit 539d39ad0c61b35f69565a037d7586deaf6d6166 ]

Remove runtime PM usage counter decrement when the
increment function has not been called to keep the
counter balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/smsc/smsc911x.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index ce4bfecc26c7..ae80a223975d 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2515,20 +2515,20 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
 
 	retval = smsc911x_init(dev);
 	if (retval < 0)
-		goto out_disable_resources;
+		goto out_init_fail;
 
 	netif_carrier_off(dev);
 
 	retval = smsc911x_mii_init(pdev, dev);
 	if (retval) {
 		SMSC_WARN(pdata, probe, "Error %i initialising mii", retval);
-		goto out_disable_resources;
+		goto out_init_fail;
 	}
 
 	retval = register_netdev(dev);
 	if (retval) {
 		SMSC_WARN(pdata, probe, "Error %i registering device", retval);
-		goto out_disable_resources;
+		goto out_init_fail;
 	} else {
 		SMSC_TRACE(pdata, probe,
 			   "Network interface: \"%s\"", dev->name);
@@ -2569,9 +2569,10 @@ static int smsc911x_drv_probe(struct platform_device *pdev)
 
 	return 0;
 
-out_disable_resources:
+out_init_fail:
 	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
+out_disable_resources:
 	(void)smsc911x_disable_resources(pdev);
 out_enable_resources_fail:
 	smsc911x_free_resources(pdev);
-- 
2.25.1

Re: [PATCH 4.19 00/28] 4.19.127-rc1 review

[Shuah Khan]

On 6/5/20 8:15 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.127 release.
> There are 28 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 07 Jun 2020 13:54:56 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.127-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Re: [PATCH 4.19 00/28] 4.19.127-rc1 review

[Jon Hunter]

On 05/06/2020 15:15, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.127 release.
> There are 28 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 07 Jun 2020 13:54:56 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.127-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h


All tests are passing for Tegra. I am missing the report for this one. I
can see everything passed but now our builders have been off-lined for
the weekend. Can't believe we are giving the builders the weekend off!

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.19 00/28] 4.19.127-rc1 review

[Jon Hunter]

On 05/06/2020 15:15, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.127 release.
> There are 28 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 07 Jun 2020 13:54:56 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.127-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h


All tests are passing for Tegra. I am missing the report for this one. I
can see everything passed but now our builders have been off-lined for
the weekend. Can't believe we are giving the builders the weekend off!

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.19 00/28] 4.19.127-rc1 review

[Greg Kroah-Hartman]

On Sat, Jun 06, 2020 at 07:32:05AM +0100, Jon Hunter wrote:
> 
> On 05/06/2020 15:15, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.127 release.
> > There are 28 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun, 07 Jun 2020 13:54:56 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.127-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> 
> 
> All tests are passing for Tegra. I am missing the report for this one. I
> can see everything passed but now our builders have been off-lined for
> the weekend. Can't believe we are giving the builders the weekend off!

Lucky builders :)

Anyway, thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.19 00/28] 4.19.127-rc1 review

[Greg Kroah-Hartman]

On Sat, Jun 06, 2020 at 07:32:05AM +0100, Jon Hunter wrote:
> 
> On 05/06/2020 15:15, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.19.127 release.
> > There are 28 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun, 07 Jun 2020 13:54:56 +0000.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.127-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> 
> 
> All tests are passing for Tegra. I am missing the report for this one. I
> can see everything passed but now our builders have been off-lined for
> the weekend. Can't believe we are giving the builders the weekend off!

Lucky builders :)

Anyway, thanks for testing all of these and letting me know.

greg k-h

Re: [PATCH 4.19 00/28] 4.19.127-rc1 review

[Guenter Roeck]

On 6/5/20 7:15 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.127 release.
> There are 28 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 07 Jun 2020 13:54:56 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 155 pass: 155 fail: 0
Qemu test results:
	total: 421 pass: 421 fail: 0

Guenter

Re: [PATCH 4.19 00/28] 4.19.127-rc1 review

[Naresh Kamboju]

On Fri, 5 Jun 2020 at 19:50, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.19.127 release.
> There are 28 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 07 Jun 2020 13:54:56 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.127-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.19.127-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: 65151bf9f715983d62613a4d9196525eb64dda53
git describe: v4.19.126-29-g65151bf9f715
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.126-29-g65151bf9f715


No regressions (compared to build v4.19.126)

No fixes (compared to build v4.19.126)


Ran 32146 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kselftest/drivers
* kselftest/filesystems
* kselftest/net
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-ipc-tests
* ltp-sched-tests
* perf
* v4l2-compliance
* ltp-commands-tests
* ltp-containers-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-native/drivers
* kselftest-vsyscall-mode-native/filesystems
* kselftest-vsyscall-mode-native/net
* kselftest-vsyscall-mode-none
* kselftest-vsyscall-mode-none/drivers
* kselftest-vsyscall-mode-none/filesystems
* kselftest-vsyscall-mode-none/net

-- 
Linaro LKFT
https://lkft.linaro.org

RE: [PATCH 4.19 00/28] 4.19.127-rc1 review

[Chris Paterson]

Hello Greg,

> From: stable-owner@vger.kernel.org <stable-owner@vger.kernel.org> On
> Behalf Of Greg Kroah-Hartman
> Sent: 05 June 2020 15:15
> 
> This is the start of the stable review cycle for the 4.19.127 release.
> There are 28 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.

No build/boot issues seen for CIP configs for Linux 4.19.127-rc1 (65151bf9f715).

Build/test pipeline/logs: https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/153373642
GitLab CI pipeline: https://gitlab.com/cip-project/cip-testing/linux-cip-pipelines/-/blob/master/trees/linux-4.19.y.yml
Relevant LAVA jobs: https://lava.ciplatform.org/scheduler/alljobs?length=25&search=65151b#table

Kind regards, Chris

> 
> Responses should be made by Sun, 07 Jun 2020 13:54:56 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-
> review/patch-4.19.127-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-
> rc.git linux-4.19.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 
> -------------
> Pseudo-Shortlog of commits:
> 
> Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>     Linux 4.19.127-rc1
> 
> Dinghao Liu <dinghao.liu@zju.edu.cn>
>     net: smsc911x: Fix runtime PM imbalance on error
> 
> Jonathan McDowell <noodles@earth.li>
>     net: ethernet: stmmac: Enable interface clocks on probe for IPQ806x
> 
> Valentin Longchamp <valentin@longchamp.me>
>     net/ethernet/freescale: rework quiesce/activate for ucc_geth
> 
> Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
>     null_blk: return error for invalid zone size
> 
> Gerald Schaefer <gerald.schaefer@de.ibm.com>
>     s390/mm: fix set_huge_pte_at() for empty ptes
> 
> Jan Schmidt <jan@centricular.com>
>     drm/edid: Add Oculus Rift S to non-desktop list
> 
> Jeremy Kerr <jk@ozlabs.org>
>     net: bmac: Fix read of MAC address from ROM
> 
> Nathan Chancellor <natechancellor@gmail.com>
>     x86/mmiotrace: Use cpumask_available() for cpumask_var_t variables
> 
> Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
>     i2c: altera: Fix race between xfer_msg and isr thread
> 
> Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
>     evm: Fix RCU list related warnings
> 
> Vineet Gupta <vgupta@synopsys.com>
>     ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT
> 
> Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
>     ARC: Fix ICCM & DCCM runtime size checks
> 
> Vasily Gorbik <gor@linux.ibm.com>
>     s390/ftrace: save traced function caller
> 
> Xinwei Kong <kong.kongxinwei@hisilicon.com>
>     spi: dw: use "smp_mb()" to avoid sending spi data error
> 
> Anju T Sudhakar <anju@linux.vnet.ibm.com>
>     powerpc/powernv: Avoid re-registration of imc debugfs directory
> 
> Xiang Chen <chenxiang66@hisilicon.com>
>     scsi: hisi_sas: Check sas_port before using it
> 
> Lucas De Marchi <lucas.demarchi@intel.com>
>     drm/i915: fix port checks for MST support on gen >= 11
> 
> Dan Carpenter <dan.carpenter@oracle.com>
>     airo: Fix read overflows sending packets
> 
> DENG Qingfang <dqfext@gmail.com>
>     net: dsa: mt7530: set CPU port to fallback mode
> 
> Can Guo <cang@codeaurora.org>
>     scsi: ufs: Release clock if DMA map fails
> 
> Jérôme Pouiller <jerome.pouiller@silabs.com>
>     mmc: fix compilation of user API
> 
> Daniel Axtens <dja@axtens.net>
>     kernel/relay.c: handle alloc_percpu returning NULL in relay_open
> 
> Giuseppe Marco Randazzo <gmrandazzo@gmail.com>
>     p54usb: add AirVasT USB stick device-id
> 
> Julian Sax <jsbc@gmx.de>
>     HID: i2c-hid: add Schneider SCL142ALM to descriptor override
> 
> Scott Shumate <scott.shumate@gmail.com>
>     HID: sony: Fix for broken buttons on DS3 USB dongles
> 
> Fan Yang <Fan_Yang@sjtu.edu.cn>
>     mm: Fix mremap not considering huge pmd devmap
> 
> Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
>     libnvdimm: Fix endian conversion issues
> 
> Tejun Heo <tj@kernel.org>
>     Revert "cgroup: Add memory barriers to plug cgroup_rstat_updated() race
> window"
> 
> 
> -------------
> 
> Diffstat:
> 
>  Makefile                                           |  4 +--
>  arch/arc/kernel/setup.c                            |  5 +--
>  arch/arc/plat-eznps/Kconfig                        |  1 +
>  arch/powerpc/platforms/powernv/opal-imc.c          | 39 +++++++++-----------
> --
>  arch/s390/kernel/mcount.S                          |  1 +
>  arch/s390/mm/hugetlbpage.c                         |  9 +++--
>  arch/x86/include/asm/pgtable.h                     |  1 +
>  arch/x86/mm/mmio-mod.c                             |  4 +--
>  drivers/block/null_blk_zoned.c                     |  4 +++
>  drivers/gpu/drm/drm_edid.c                         |  3 +-
>  drivers/gpu/drm/i915/intel_dp.c                    |  7 ++--
>  drivers/gpu/drm/i915/intel_dp_mst.c                | 22 ++++++++----
>  drivers/hid/hid-sony.c                             | 17 ++++++++++
>  drivers/hid/i2c-hid/i2c-hid-dmi-quirks.c           |  8 +++++
>  drivers/i2c/busses/i2c-altera.c                    | 10 +++++-
>  drivers/net/dsa/mt7530.c                           | 11 ++++--
>  drivers/net/dsa/mt7530.h                           |  6 ++++
>  drivers/net/ethernet/apple/bmac.c                  |  2 +-
>  drivers/net/ethernet/freescale/ucc_geth.c          | 13 ++++----
>  drivers/net/ethernet/smsc/smsc911x.c               |  9 ++---
>  .../net/ethernet/stmicro/stmmac/dwmac-ipq806x.c    | 13 ++++++++
>  drivers/net/wireless/cisco/airo.c                  | 12 +++++++
>  drivers/net/wireless/intersil/p54/p54usb.c         |  1 +
>  drivers/nvdimm/btt.c                               |  8 ++---
>  drivers/nvdimm/namespace_devs.c                    |  7 ++--
>  drivers/scsi/hisi_sas/hisi_sas_main.c              |  3 +-
>  drivers/scsi/ufs/ufshcd.c                          |  1 +
>  drivers/spi/spi-dw.c                               |  3 ++
>  include/uapi/linux/mmc/ioctl.h                     |  1 +
>  kernel/cgroup/rstat.c                              | 16 ++-------
>  kernel/relay.c                                     |  5 +++
>  mm/mremap.c                                        |  2 +-
>  security/integrity/evm/evm_crypto.c                |  2 +-
>  security/integrity/evm/evm_main.c                  |  4 +--
>  security/integrity/evm/evm_secfs.c                 |  9 ++++-
>  35 files changed, 178 insertions(+), 85 deletions(-)
>