[PATCH net 0/9] net: qed/qede: various stability fixes

[PATCH net 0/9] net: qed/qede: various stability fixes

[Alexander Lobakin]

This set addresses several near-critical issues that were observed
and reproduced on different test and production configurations.

Alexander Lobakin (9):
  net: qed: fix left elements count calculation
  net: qed: fix async event callbacks unregistering
  net: qede: stop adding events on an already destroyed workqueue
  net: qed: fix NVMe login fails over VFs
  net: qed: fix excessive QM ILT lines consumption
  net: qede: fix PTP initialization on recovery
  net: qede: fix use-after-free on recovery and AER handling
  net: qed: reset ILT block sizes before recomputing to fix crashes
  net: qed: fix "maybe uninitialized" warning

 drivers/net/ethernet/qlogic/qed/qed_cxt.c    | 21 ++++++++++++-
 drivers/net/ethernet/qlogic/qed/qed_dev.c    | 11 +++++--
 drivers/net/ethernet/qlogic/qed/qed_iwarp.c  |  2 --
 drivers/net/ethernet/qlogic/qed/qed_roce.c   |  1 -
 drivers/net/ethernet/qlogic/qed/qed_vf.c     | 23 +++++++++++----
 drivers/net/ethernet/qlogic/qede/qede_main.c |  3 +-
 drivers/net/ethernet/qlogic/qede/qede_ptp.c  | 31 ++++++++------------
 drivers/net/ethernet/qlogic/qede/qede_ptp.h  |  2 +-
 drivers/net/ethernet/qlogic/qede/qede_rdma.c |  3 +-
 include/linux/qed/qed_chain.h                | 26 +++++++++-------
 10 files changed, 80 insertions(+), 43 deletions(-)

-- 
2.21.0

[PATCH net 1/9] net: qed: fix left elements count calculation

[Alexander Lobakin]

qed_chain_get_element_left{,_u32} returned 0 when the difference
between producer and consumer page count was equal to the total
page count.
Fix this by conditional expanding of producer value (vs
unconditional). This allowed to eliminate normalizaton against
total page count, which was the cause of this bug.

Misc: replace open-coded constants with common defines.

Fixes: a91eb52abb50 ("qed: Revisit chain implementation")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
---
 include/linux/qed/qed_chain.h | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/include/linux/qed/qed_chain.h b/include/linux/qed/qed_chain.h
index 733fad7dfbed..6d15040c642c 100644
--- a/include/linux/qed/qed_chain.h
+++ b/include/linux/qed/qed_chain.h
@@ -207,28 +207,34 @@ static inline u32 qed_chain_get_cons_idx_u32(struct qed_chain *p_chain)
 
 static inline u16 qed_chain_get_elem_left(struct qed_chain *p_chain)
 {
+	u16 elem_per_page = p_chain->elem_per_page;
+	u32 prod = p_chain->u.chain16.prod_idx;
+	u32 cons = p_chain->u.chain16.cons_idx;
 	u16 used;
 
-	used = (u16) (((u32)0x10000 +
-		       (u32)p_chain->u.chain16.prod_idx) -
-		      (u32)p_chain->u.chain16.cons_idx);
+	if (prod < cons)
+		prod += (u32)U16_MAX + 1;
+
+	used = (u16)(prod - cons);
 	if (p_chain->mode == QED_CHAIN_MODE_NEXT_PTR)
-		used -= p_chain->u.chain16.prod_idx / p_chain->elem_per_page -
-		    p_chain->u.chain16.cons_idx / p_chain->elem_per_page;
+		used -= prod / elem_per_page - cons / elem_per_page;
 
 	return (u16)(p_chain->capacity - used);
 }
 
 static inline u32 qed_chain_get_elem_left_u32(struct qed_chain *p_chain)
 {
+	u16 elem_per_page = p_chain->elem_per_page;
+	u64 prod = p_chain->u.chain32.prod_idx;
+	u64 cons = p_chain->u.chain32.cons_idx;
 	u32 used;
 
-	used = (u32) (((u64)0x100000000ULL +
-		       (u64)p_chain->u.chain32.prod_idx) -
-		      (u64)p_chain->u.chain32.cons_idx);
+	if (prod < cons)
+		prod += (u64)U32_MAX + 1;
+
+	used = (u32)(prod - cons);
 	if (p_chain->mode == QED_CHAIN_MODE_NEXT_PTR)
-		used -= p_chain->u.chain32.prod_idx / p_chain->elem_per_page -
-		    p_chain->u.chain32.cons_idx / p_chain->elem_per_page;
+		used -= (u32)(prod / elem_per_page - cons / elem_per_page);
 
 	return p_chain->capacity - used;
 }
-- 
2.21.0

[PATCH net 2/9] net: qed: fix async event callbacks unregistering

[Alexander Lobakin]

qed_spq_unregister_async_cb() should be called before
qed_rdma_info_free() to avoid crash-spawning uses-after-free.
Instead of calling it from each subsystem exit code, do it in one place
on PF down.

Fixes: 291d57f67d24 ("qed: Fix rdma_info structure allocation")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c   | 9 +++++++--
 drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 2 --
 drivers/net/ethernet/qlogic/qed/qed_roce.c  | 1 -
 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index 1eebf30fa798..b41ada668948 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -1368,6 +1368,8 @@ static void qed_dbg_user_data_free(struct qed_hwfn *p_hwfn)
 
 void qed_resc_free(struct qed_dev *cdev)
 {
+	struct qed_rdma_info *rdma_info;
+	struct qed_hwfn *p_hwfn;
 	int i;
 
 	if (IS_VF(cdev)) {
@@ -1385,7 +1387,8 @@ void qed_resc_free(struct qed_dev *cdev)
 	qed_llh_free(cdev);
 
 	for_each_hwfn(cdev, i) {
-		struct qed_hwfn *p_hwfn = &cdev->hwfns[i];
+		p_hwfn = cdev->hwfns + i;
+		rdma_info = p_hwfn->p_rdma_info;
 
 		qed_cxt_mngr_free(p_hwfn);
 		qed_qm_info_free(p_hwfn);
@@ -1404,8 +1407,10 @@ void qed_resc_free(struct qed_dev *cdev)
 			qed_ooo_free(p_hwfn);
 		}
 
-		if (QED_IS_RDMA_PERSONALITY(p_hwfn))
+		if (QED_IS_RDMA_PERSONALITY(p_hwfn) && rdma_info) {
+			qed_spq_unregister_async_cb(p_hwfn, rdma_info->proto);
 			qed_rdma_info_free(p_hwfn);
+		}
 
 		qed_iov_free(p_hwfn);
 		qed_l2_free(p_hwfn);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index d2fe61a5cf56..5409a2da6106 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -2836,8 +2836,6 @@ int qed_iwarp_stop(struct qed_hwfn *p_hwfn)
 	if (rc)
 		return rc;
 
-	qed_spq_unregister_async_cb(p_hwfn, PROTOCOLID_IWARP);
-
 	return qed_iwarp_ll2_stop(p_hwfn);
 }
 
diff --git a/drivers/net/ethernet/qlogic/qed/qed_roce.c b/drivers/net/ethernet/qlogic/qed/qed_roce.c
index 4566815f7b87..7271dd7166e5 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_roce.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_roce.c
@@ -113,7 +113,6 @@ void qed_roce_stop(struct qed_hwfn *p_hwfn)
 			break;
 		}
 	}
-	qed_spq_unregister_async_cb(p_hwfn, PROTOCOLID_ROCE);
 }
 
 static void qed_rdma_copy_gids(struct qed_rdma_qp *qp, __le32 *src_gid,
-- 
2.21.0

[PATCH net 3/9] net: qede: stop adding events on an already destroyed workqueue

[Alexander Lobakin]

Set rdma_wq pointer to NULL after destroying the workqueue and check
for it when adding new events to fix crashes on driver unload.

Fixes: cee9fbd8e2e9 ("qede: Add qedr framework")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
---
 drivers/net/ethernet/qlogic/qede/qede_rdma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_rdma.c b/drivers/net/ethernet/qlogic/qede/qede_rdma.c
index 2d873ae8a234..668ccc9d49f8 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_rdma.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_rdma.c
@@ -105,6 +105,7 @@ static void qede_rdma_destroy_wq(struct qede_dev *edev)
 
 	qede_rdma_cleanup_event(edev);
 	destroy_workqueue(edev->rdma_info.rdma_wq);
+	edev->rdma_info.rdma_wq = NULL;
 }
 
 int qede_rdma_dev_add(struct qede_dev *edev, bool recovery)
@@ -325,7 +326,7 @@ static void qede_rdma_add_event(struct qede_dev *edev,
 	if (edev->rdma_info.exp_recovery)
 		return;
 
-	if (!edev->rdma_info.qedr_dev)
+	if (!edev->rdma_info.qedr_dev || !edev->rdma_info.rdma_wq)
 		return;
 
 	/* We don't want the cleanup flow to start while we're allocating and
-- 
2.21.0

[PATCH net 4/9] net: qed: fix NVMe login fails over VFs

[Alexander Lobakin]

25ms sleep cycles in waiting for PF response are excessive and may lead
to different timeout failures.

Start to wait with short udelays, and in most cases polling will end
here. If the time was not sufficient, switch to msleeps.
usleep_range() may go far beyond 100us depending on platform and tick
configuration, hence atomic udelays for consistency.

Also add explicit DMA barriers since 'done' always comes from a shared
request-response DMA pool, and note that in the comment nearby.

Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
---
 drivers/net/ethernet/qlogic/qed/qed_vf.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_vf.c b/drivers/net/ethernet/qlogic/qed/qed_vf.c
index 856051f50eb7..adc2c8f3d48e 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_vf.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_vf.c
@@ -81,12 +81,17 @@ static void qed_vf_pf_req_end(struct qed_hwfn *p_hwfn, int req_status)
 	mutex_unlock(&(p_hwfn->vf_iov_info->mutex));
 }
 
+#define QED_VF_CHANNEL_USLEEP_ITERATIONS	90
+#define QED_VF_CHANNEL_USLEEP_DELAY		100
+#define QED_VF_CHANNEL_MSLEEP_ITERATIONS	10
+#define QED_VF_CHANNEL_MSLEEP_DELAY		25
+
 static int qed_send_msg2pf(struct qed_hwfn *p_hwfn, u8 *done, u32 resp_size)
 {
 	union vfpf_tlvs *p_req = p_hwfn->vf_iov_info->vf2pf_request;
 	struct ustorm_trigger_vf_zone trigger;
 	struct ustorm_vf_zone *zone_data;
-	int rc = 0, time = 100;
+	int iter, rc = 0;
 
 	zone_data = (struct ustorm_vf_zone *)PXP_VF_BAR0_START_USDM_ZONE_B;
 
@@ -126,11 +131,19 @@ static int qed_send_msg2pf(struct qed_hwfn *p_hwfn, u8 *done, u32 resp_size)
 	REG_WR(p_hwfn, (uintptr_t)&zone_data->trigger, *((u32 *)&trigger));
 
 	/* When PF would be done with the response, it would write back to the
-	 * `done' address. Poll until then.
+	 * `done' address from a coherent DMA zone. Poll until then.
 	 */
-	while ((!*done) && time) {
-		msleep(25);
-		time--;
+
+	iter = QED_VF_CHANNEL_USLEEP_ITERATIONS;
+	while (!*done && iter--) {
+		udelay(QED_VF_CHANNEL_USLEEP_DELAY);
+		dma_rmb();
+	}
+
+	iter = QED_VF_CHANNEL_MSLEEP_ITERATIONS;
+	while (!*done && iter--) {
+		msleep(QED_VF_CHANNEL_MSLEEP_DELAY);
+		dma_rmb();
 	}
 
 	if (!*done) {
-- 
2.21.0

[PATCH net 5/9] net: qed: fix excessive QM ILT lines consumption

[Alexander Lobakin]

This is likely a copy'n'paste mistake. The amount of ILT lines to
reserve for a single VF was being multiplied by the total VFs count.
This led to a huge redundancy in reservation and potential lines
drainouts.

Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
---
 drivers/net/ethernet/qlogic/qed/qed_cxt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
index 7b76667acaba..c0a769b5358c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
@@ -271,7 +271,7 @@ static void qed_cxt_qm_iids(struct qed_hwfn *p_hwfn,
 		vf_tids += segs[NUM_TASK_PF_SEGMENTS].count;
 	}
 
-	iids->vf_cids += vf_cids * p_mngr->vf_count;
+	iids->vf_cids = vf_cids;
 	iids->tids += vf_tids * p_mngr->vf_count;
 
 	DP_VERBOSE(p_hwfn, QED_MSG_ILT,
-- 
2.21.0

[PATCH net 6/9] net: qede: fix PTP initialization on recovery

[Alexander Lobakin]

Currently PTP cyclecounter and timecounter are initialized only on
the first probing and are cleaned up during removal. This means that
PTP becomes non-functional after device recovery.
Fix this by unconditional PTP initialization on probing and clearing
Tx pending bit on exiting.

Fixes: ccc67ef50b90 ("qede: Error recovery process")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
---
 drivers/net/ethernet/qlogic/qede/qede_main.c |  2 +-
 drivers/net/ethernet/qlogic/qede/qede_ptp.c  | 31 ++++++++------------
 drivers/net/ethernet/qlogic/qede/qede_ptp.h  |  2 +-
 3 files changed, 15 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 756c05eb96f3..f6ff31e73ebe 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1229,7 +1229,7 @@ static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level,
 
 	/* PTP not supported on VFs */
 	if (!is_vf)
-		qede_ptp_enable(edev, (mode == QEDE_PROBE_NORMAL));
+		qede_ptp_enable(edev);
 
 	edev->ops->register_ops(cdev, &qede_ll_ops, edev);
 
diff --git a/drivers/net/ethernet/qlogic/qede/qede_ptp.c b/drivers/net/ethernet/qlogic/qede/qede_ptp.c
index 4c7f7a7fc151..cd5841a9415e 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_ptp.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_ptp.c
@@ -412,6 +412,7 @@ void qede_ptp_disable(struct qede_dev *edev)
 	if (ptp->tx_skb) {
 		dev_kfree_skb_any(ptp->tx_skb);
 		ptp->tx_skb = NULL;
+		clear_bit_unlock(QEDE_FLAGS_PTP_TX_IN_PRORGESS, &edev->flags);
 	}
 
 	/* Disable PTP in HW */
@@ -423,7 +424,7 @@ void qede_ptp_disable(struct qede_dev *edev)
 	edev->ptp = NULL;
 }
 
-static int qede_ptp_init(struct qede_dev *edev, bool init_tc)
+static int qede_ptp_init(struct qede_dev *edev)
 {
 	struct qede_ptp *ptp;
 	int rc;
@@ -444,25 +445,19 @@ static int qede_ptp_init(struct qede_dev *edev, bool init_tc)
 	/* Init work queue for Tx timestamping */
 	INIT_WORK(&ptp->work, qede_ptp_task);
 
-	/* Init cyclecounter and timecounter. This is done only in the first
-	 * load. If done in every load, PTP application will fail when doing
-	 * unload / load (e.g. MTU change) while it is running.
-	 */
-	if (init_tc) {
-		memset(&ptp->cc, 0, sizeof(ptp->cc));
-		ptp->cc.read = qede_ptp_read_cc;
-		ptp->cc.mask = CYCLECOUNTER_MASK(64);
-		ptp->cc.shift = 0;
-		ptp->cc.mult = 1;
-
-		timecounter_init(&ptp->tc, &ptp->cc,
-				 ktime_to_ns(ktime_get_real()));
-	}
+	/* Init cyclecounter and timecounter */
+	memset(&ptp->cc, 0, sizeof(ptp->cc));
+	ptp->cc.read = qede_ptp_read_cc;
+	ptp->cc.mask = CYCLECOUNTER_MASK(64);
+	ptp->cc.shift = 0;
+	ptp->cc.mult = 1;
 
-	return rc;
+	timecounter_init(&ptp->tc, &ptp->cc, ktime_to_ns(ktime_get_real()));
+
+	return 0;
 }
 
-int qede_ptp_enable(struct qede_dev *edev, bool init_tc)
+int qede_ptp_enable(struct qede_dev *edev)
 {
 	struct qede_ptp *ptp;
 	int rc;
@@ -483,7 +478,7 @@ int qede_ptp_enable(struct qede_dev *edev, bool init_tc)
 
 	edev->ptp = ptp;
 
-	rc = qede_ptp_init(edev, init_tc);
+	rc = qede_ptp_init(edev);
 	if (rc)
 		goto err1;
 
diff --git a/drivers/net/ethernet/qlogic/qede/qede_ptp.h b/drivers/net/ethernet/qlogic/qede/qede_ptp.h
index 691a14c4b2c5..89c7f3cf3ee2 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_ptp.h
+++ b/drivers/net/ethernet/qlogic/qede/qede_ptp.h
@@ -41,7 +41,7 @@ void qede_ptp_rx_ts(struct qede_dev *edev, struct sk_buff *skb);
 void qede_ptp_tx_ts(struct qede_dev *edev, struct sk_buff *skb);
 int qede_ptp_hw_ts(struct qede_dev *edev, struct ifreq *req);
 void qede_ptp_disable(struct qede_dev *edev);
-int qede_ptp_enable(struct qede_dev *edev, bool init_tc);
+int qede_ptp_enable(struct qede_dev *edev);
 int qede_ptp_get_ts_info(struct qede_dev *edev, struct ethtool_ts_info *ts);
 
 static inline void qede_ptp_record_rx_ts(struct qede_dev *edev,
-- 
2.21.0

[PATCH net 7/9] net: qede: fix use-after-free on recovery and AER handling

[Alexander Lobakin]

Set edev->cdev pointer to NULL after calling remove() callback to avoid
using of already freed object.

Fixes: ccc67ef50b90 ("qede: Error recovery process")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
---
 drivers/net/ethernet/qlogic/qede/qede_main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index f6ff31e73ebe..29e285430f99 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1318,6 +1318,7 @@ static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode)
 	if (system_state == SYSTEM_POWER_OFF)
 		return;
 	qed_ops->common->remove(cdev);
+	edev->cdev = NULL;
 
 	/* Since this can happen out-of-sync with other flows,
 	 * don't release the netdevice until after slowpath stop
-- 
2.21.0

[PATCH net 8/9] net: qed: reset ILT block sizes before recomputing to fix crashes

[Alexander Lobakin]

Sizes of all ILT blocks must be reset before ILT recomputing when
disabling clients, or memory allocation may exceed ILT shadow array
and provoke system crashes.

Fixes: 1408cc1fa48c ("qed: Introduce VFs")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
---
 drivers/net/ethernet/qlogic/qed/qed_cxt.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
index c0a769b5358c..08ba9d54ab63 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
@@ -465,6 +465,20 @@ static struct qed_ilt_cli_blk *qed_cxt_set_blk(struct qed_ilt_cli_blk *p_blk)
 	return p_blk;
 }
 
+static void qed_cxt_ilt_blk_reset(struct qed_hwfn *p_hwfn)
+{
+	struct qed_ilt_client_cfg *clients = p_hwfn->p_cxt_mngr->clients;
+	u32 cli_idx, blk_idx;
+
+	for (cli_idx = 0; cli_idx < MAX_ILT_CLIENTS; cli_idx++) {
+		for (blk_idx = 0; blk_idx < ILT_CLI_PF_BLOCKS; blk_idx++)
+			clients[cli_idx].pf_blks[blk_idx].total_size = 0;
+
+		for (blk_idx = 0; blk_idx < ILT_CLI_VF_BLOCKS; blk_idx++)
+			clients[cli_idx].vf_blks[blk_idx].total_size = 0;
+	}
+}
+
 int qed_cxt_cfg_ilt_compute(struct qed_hwfn *p_hwfn, u32 *line_count)
 {
 	struct qed_cxt_mngr *p_mngr = p_hwfn->p_cxt_mngr;
@@ -484,6 +498,11 @@ int qed_cxt_cfg_ilt_compute(struct qed_hwfn *p_hwfn, u32 *line_count)
 
 	p_mngr->pf_start_line = RESC_START(p_hwfn, QED_ILT);
 
+	/* Reset all ILT blocks at the beginning of ILT computing in order
+	 * to prevent memory allocation for irrelevant blocks afterwards.
+	 */
+	qed_cxt_ilt_blk_reset(p_hwfn);
+
 	DP_VERBOSE(p_hwfn, QED_MSG_ILT,
 		   "hwfn [%d] - Set context manager starting line to be 0x%08x\n",
 		   p_hwfn->my_id, p_hwfn->p_cxt_mngr->pf_start_line);
-- 
2.21.0

[PATCH net 9/9] net: qed: fix "maybe uninitialized" warning

[Alexander Lobakin]

Variable 'abs_ppfid' in qed_dev.c:qed_llh_add_mac_filter() always gets
printed, but is initialized only under 'ref_cnt == 1' condition. This
results in:

In file included from ./include/linux/kernel.h:15:0,
                 from ./include/asm-generic/bug.h:19,
                 from ./arch/x86/include/asm/bug.h:86,
                 from ./include/linux/bug.h:5,
                 from ./include/linux/io.h:11,
                 from drivers/net/ethernet/qlogic/qed/qed_dev.c:35:
drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_add_mac_filter':
./include/linux/printk.h:358:2: warning: 'abs_ppfid' may be used uninitialized
in this function [-Wmaybe-uninitialized]
  printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
  ^~~~~~
drivers/net/ethernet/qlogic/qed/qed_dev.c:983:17: note: 'abs_ppfid' was declared
here
  u8 filter_idx, abs_ppfid;
                 ^~~~~~~~~

...under W=1+.

Fix this by initializing it with zero.

Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for
offload protocols")
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
---
 drivers/net/ethernet/qlogic/qed/qed_dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_dev.c b/drivers/net/ethernet/qlogic/qed/qed_dev.c
index b41ada668948..3aa51374e727 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_dev.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_dev.c
@@ -980,7 +980,7 @@ int qed_llh_add_mac_filter(struct qed_dev *cdev,
 	struct qed_hwfn *p_hwfn = QED_LEADING_HWFN(cdev);
 	struct qed_ptt *p_ptt = qed_ptt_acquire(p_hwfn);
 	union qed_llh_filter filter = {};
-	u8 filter_idx, abs_ppfid;
+	u8 filter_idx, abs_ppfid = 0;
 	u32 high, low, ref_cnt;
 	int rc = 0;
 
-- 
2.21.0

Re: [PATCH net 9/9] net: qed: fix "maybe uninitialized" warning

[Jakub Kicinski]

On Mon, 22 Jun 2020 14:14:13 +0300 Alexander Lobakin wrote:
> Variable 'abs_ppfid' in qed_dev.c:qed_llh_add_mac_filter() always gets
> printed, but is initialized only under 'ref_cnt == 1' condition. This
> results in:
> 
> In file included from ./include/linux/kernel.h:15:0,
>                  from ./include/asm-generic/bug.h:19,
>                  from ./arch/x86/include/asm/bug.h:86,
>                  from ./include/linux/bug.h:5,
>                  from ./include/linux/io.h:11,
>                  from drivers/net/ethernet/qlogic/qed/qed_dev.c:35:
> drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_add_mac_filter':
> ./include/linux/printk.h:358:2: warning: 'abs_ppfid' may be used uninitialized
> in this function [-Wmaybe-uninitialized]
>   printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
>   ^~~~~~
> drivers/net/ethernet/qlogic/qed/qed_dev.c:983:17: note: 'abs_ppfid' was declared
> here
>   u8 filter_idx, abs_ppfid;
>                  ^~~~~~~~~
> 
> ...under W=1+.
> 
> Fix this by initializing it with zero.
> 
> Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for
> offload protocols")
> Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
> Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>

Please don't wrap Fixes tags:

Fixes tag: Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for
Has these problem(s):
	- Subject has leading but no trailing parentheses
	- Subject has leading but no trailing quotes

Re: [PATCH net 9/9] net: qed: fix "maybe uninitialized" warning

[Alexander Lobakin]

From: Jakub Kicinski <kuba@kernel.org>
Date: Mon, 22 Jun 2020 14:44:37 -0700

> On Mon, 22 Jun 2020 14:14:13 +0300 Alexander Lobakin wrote:
> > Variable 'abs_ppfid' in qed_dev.c:qed_llh_add_mac_filter() always gets
> > printed, but is initialized only under 'ref_cnt == 1' condition. This
> > results in:
> > 
> > In file included from ./include/linux/kernel.h:15:0,
> >                  from ./include/asm-generic/bug.h:19,
> >                  from ./arch/x86/include/asm/bug.h:86,
> >                  from ./include/linux/bug.h:5,
> >                  from ./include/linux/io.h:11,
> >                  from drivers/net/ethernet/qlogic/qed/qed_dev.c:35:
> > drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_add_mac_filter':
> > ./include/linux/printk.h:358:2: warning: 'abs_ppfid' may be used uninitialized
> > in this function [-Wmaybe-uninitialized]
> >   printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
> >   ^~~~~~
> > drivers/net/ethernet/qlogic/qed/qed_dev.c:983:17: note: 'abs_ppfid' was declared
> > here
> >   u8 filter_idx, abs_ppfid;
> >                  ^~~~~~~~~
> > 
> > ...under W=1+.
> > 
> > Fix this by initializing it with zero.
> > 
> > Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for
> > offload protocols")
> > Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
> > Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
> > Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
> 
> Please don't wrap Fixes tags:

Aww, second time in a row I fail on this. Sorry, will send v2
soon.

> Fixes tag: Fixes: 79284adeb99e ("qed: Add llh ppfid interface and 100g support for
> Has these problem(s):
> 	- Subject has leading but no trailing parentheses
> 	- Subject has leading but no trailing quotes

Al